diff options
| -rw-r--r-- | drivers/block/umem.c | 22 | ||||
| -rw-r--r-- | drivers/block/umem.h | 14 |
2 files changed, 18 insertions, 18 deletions
diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 97c5dc9436a9..251041763690 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -293,7 +293,7 @@ static void mm_start_io(struct cardinfo *card) desc->control_bits &= ~cpu_to_le32(DMASCR_CHAIN_EN); desc->sem_control_bits = desc->control_bits; - + if (debug & DEBUG_LED_ON_TRANSFER) set_led(card, LED_REMOVE, LED_ON); @@ -327,7 +327,7 @@ static int add_bio(struct cardinfo *card); static void activate(struct cardinfo *card) { - /* if No page is Active, and Ready is + /* if No page is Active, and Ready is * not empty, then switch Ready page * to active and start IO. * Then add any bh's that are available to Ready @@ -366,7 +366,7 @@ static void mm_unplug_device(struct request_queue *q) spin_unlock_irqrestore(&card->lock, flags); } -/* +/* * If there is room on Ready page, take * one bh off list and add it. * return 1 if there was room, else 0. @@ -467,7 +467,7 @@ static void process_page(unsigned long data) if (card->Active < 0) goto out_unlock; page = &card->mm_pages[card->Active]; - + while (page->headcnt < page->cnt) { struct bio *bio = page->bio; struct mm_dma_desc *desc = &page->desc[page->headcnt]; @@ -477,7 +477,7 @@ static void process_page(unsigned long data) if (!(control & DMASCR_DMA_COMPLETE)) { control = dma_status; - last=1; + last=1; } page->headcnt++; idx = page->idx; @@ -487,7 +487,7 @@ static void process_page(unsigned long data) page->idx = page->bio->bi_idx; } - pci_unmap_page(card->dev, desc->data_dma_handle, + pci_unmap_page(card->dev, desc->data_dma_handle, bio_iovec_idx(bio,idx)->bv_len, (control& DMASCR_TRANSFER_READ) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); @@ -592,7 +592,7 @@ HW_TRACE(0x30); else writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16, card->csr_remap+ DMA_STATUS_CTRL + 2); - + /* log errors and clear interrupt status */ if (dma_status & DMASCR_ANY_ERR) { unsigned int data_log1, data_log2; @@ -668,7 +668,7 @@ HW_TRACE(0x30); HW_TRACE(0x36); - return IRQ_HANDLED; + return IRQ_HANDLED; } /* ----------------------------------------------------------------------------------- @@ -761,7 +761,7 @@ static void check_all_batteries(unsigned long ptr) { int i; - for (i = 0; i < num_cards; i++) + for (i = 0; i < num_cards; i++) if (!(cards[i].flags & UM_FLAG_NO_BATT)) { struct cardinfo *card = &cards[i]; spin_lock_bh(&card->lock); @@ -972,7 +972,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i tasklet_init(&card->tasklet, process_page, (unsigned long)card); card->check_batteries = 0; - + mem_present = readb(card->csr_remap + MEMCTRLSTATUS_MEMORY); switch (mem_present) { case MEM_128_MB: @@ -1005,7 +1005,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i card->battery[1].good = !(batt_status & BATTERY_2_FAILURE); card->battery[0].last_change = card->battery[1].last_change = jiffies; - if (card->flags & UM_FLAG_NO_BATT) + if (card->flags & UM_FLAG_NO_BATT) dev_printk(KERN_INFO, &card->dev->dev, "Size %d KB\n", card->mm_size); else { diff --git a/drivers/block/umem.h b/drivers/block/umem.h index 3a3819afed92..375c68974c9a 100644 --- a/drivers/block/umem.h +++ b/drivers/block/umem.h @@ -87,13 +87,13 @@ #define DMASCR_DMA_COMPLETE 0x40000 #define DMASCR_CHAIN_COMPLETE 0x80000 -/* -3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE -READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA -TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE -TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS -(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, -AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING +/* +3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE +READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA +TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE +TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS +(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, +AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING DMA READ OPERATIONS. */ #define DMASCR_READ 0x60000000 |