diff options
| -rw-r--r-- | Documentation/gpu/drm-kms-helpers.rst | 9 | ||||
| -rw-r--r-- | drivers/gpu/drm/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_atomic.c | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_atomic_helper.c | 35 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_atomic_state_helper.c | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_atomic_uapi.c | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_self_refresh_helper.c | 216 | ||||
| -rw-r--r-- | include/drm/drm_atomic.h | 15 | ||||
| -rw-r--r-- | include/drm/drm_connector.h | 14 | ||||
| -rw-r--r-- | include/drm/drm_crtc.h | 19 | ||||
| -rw-r--r-- | include/drm/drm_self_refresh_helper.h | 20 |
11 files changed, 338 insertions, 5 deletions
diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 0fe726a6ee67..b327bbc11182 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -181,6 +181,15 @@ Panel Helper Reference .. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c :export: +Panel Self Refresh Helper Reference +=================================== + +.. kernel-doc:: drivers/gpu/drm/drm_self_refresh_helper.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/drm_self_refresh_helper.c + :export: + HDCP Helper Functions Reference =============================== diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index d36feb4a6233..9d630a28a788 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -43,7 +43,7 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_dsc.o drm_probe_helper drm_simple_kms_helper.o drm_modeset_helper.o \ drm_scdc_helper.o drm_gem_framebuffer_helper.o \ drm_atomic_state_helper.o drm_damage_helper.o \ - drm_format_helper.o + drm_format_helper.o drm_self_refresh_helper.o drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index a4e779deab0f..419381abbdd1 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -384,6 +384,7 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p, drm_printf(p, "crtc[%u]: %s\n", crtc->base.id, crtc->name); drm_printf(p, "\tenable=%d\n", state->enable); drm_printf(p, "\tactive=%d\n", state->active); + drm_printf(p, "\tself_refresh_active=%d\n", state->self_refresh_active); drm_printf(p, "\tplanes_changed=%d\n", state->planes_changed); drm_printf(p, "\tmode_changed=%d\n", state->mode_changed); drm_printf(p, "\tactive_changed=%d\n", state->active_changed); @@ -999,6 +1000,7 @@ static void drm_atomic_connector_print_state(struct drm_printer *p, drm_printf(p, "connector[%u]: %s\n", connector->base.id, connector->name); drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)"); + drm_printf(p, "\tself_refresh_aware=%d\n", state->self_refresh_aware); if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) if (state->writeback_job && state->writeback_job->fb) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index e58be6996069..d9ea7e51ffdc 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -34,6 +34,7 @@ #include <drm/drm_device.h> #include <drm/drm_plane_helper.h> #include <drm/drm_print.h> +#include <drm/drm_self_refresh_helper.h> #include <drm/drm_vblank.h> #include <drm/drm_writeback.h> @@ -953,10 +954,33 @@ int drm_atomic_helper_check(struct drm_device *dev, if (state->legacy_cursor_update) state->async_update = !drm_atomic_helper_async_check(dev, state); + drm_self_refresh_helper_alter_state(state); + return ret; } EXPORT_SYMBOL(drm_atomic_helper_check); +static bool +crtc_needs_disable(struct drm_crtc_state *old_state, + struct drm_crtc_state *new_state) +{ + /* + * No new_state means the crtc is off, so the only criteria is whether + * it's currently active or in self refresh mode. + */ + if (!new_state) + return drm_atomic_crtc_effectively_active(old_state); + + /* + * We need to run through the crtc_funcs->disable() function if the crtc + * is currently on, if it's transitioning to self refresh mode, or if + * it's in self refresh mode and needs to be fully disabled. + */ + return old_state->active || + (old_state->self_refresh_active && !new_state->enable) || + new_state->self_refresh_active; +} + static void disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) { @@ -977,7 +1001,14 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) old_crtc_state = drm_atomic_get_old_crtc_state(old_state, old_conn_state->crtc); - if (!old_crtc_state->active || + if (new_conn_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state( + old_state, + new_conn_state->crtc); + else + new_crtc_state = NULL; + + if (!crtc_needs_disable(old_crtc_state, new_crtc_state) || !drm_atomic_crtc_needs_modeset(old_conn_state->crtc->state)) continue; @@ -1023,7 +1054,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) continue; - if (!old_crtc_state->active) + if (!crtc_needs_disable(old_crtc_state, new_crtc_state)) continue; funcs = crtc->helper_private; diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c index 97ab26679b96..7d7347a6f194 100644 --- a/drivers/gpu/drm/drm_atomic_state_helper.c +++ b/drivers/gpu/drm/drm_atomic_state_helper.c @@ -129,6 +129,10 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc, state->commit = NULL; state->event = NULL; state->pageflip_flags = 0; + + /* Self refresh should be canceled when a new update is available */ + state->active = drm_atomic_crtc_effectively_active(state); + state->self_refresh_active = false; } EXPORT_SYMBOL(__drm_atomic_helper_crtc_duplicate_state); diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index eb22e8bdd853..abe38bdf85ae 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -490,7 +490,7 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc, struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_active) - *val = state->active; + *val = drm_atomic_crtc_effectively_active(state); else if (property == config->prop_mode_id) *val = (state->mode_blob) ? state->mode_blob->base.id : 0; else if (property == config->prop_vrr_enabled) @@ -788,7 +788,10 @@ drm_atomic_connector_get_property(struct drm_connector *connector, if (property == config->prop_crtc_id) { *val = (state->crtc) ? state->crtc->base.id : 0; } else if (property == config->dpms_property) { - *val = connector->dpms; + if (state->crtc && state->crtc->state->self_refresh_active) + *val = DRM_MODE_DPMS_ON; + else + *val = connector->dpms; } else if (property == config->tv_select_subconnector_property) { *val = state->tv.subconnector; } else if (property == config->tv_left_margin_property) { diff --git a/drivers/gpu/drm/drm_self_refresh_helper.c b/drivers/gpu/drm/drm_self_refresh_helper.c new file mode 100644 index 000000000000..2b3daaf77841 --- /dev/null +++ b/drivers/gpu/drm/drm_self_refresh_helper.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright (C) 2019 Google, Inc. + * + * Authors: + * Sean Paul <seanpaul@chromium.org> + */ +#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_device.h> +#include <drm/drm_mode_config.h> +#include <drm/drm_modeset_lock.h> +#include <drm/drm_print.h> +#include <drm/drm_self_refresh_helper.h> + +/** + * DOC: overview + * + * This helper library provides an easy way for drivers to leverage the atomic + * framework to implement panel self refresh (SR) support. Drivers are + * responsible for initializing and cleaning up the SR helpers on load/unload + * (see &drm_self_refresh_helper_init/&drm_self_refresh_helper_cleanup). + * The connector is responsible for setting + * &drm_connector_state.self_refresh_aware to true at runtime if it is SR-aware + * (meaning it knows how to initiate self refresh on the panel). + * + * Once a crtc has enabled SR using &drm_self_refresh_helper_init, the + * helpers will monitor activity and call back into the driver to enable/disable + * SR as appropriate. The best way to think about this is that it's a DPMS + * on/off request with &drm_crtc_state.self_refresh_active set in crtc state + * that tells you to disable/enable SR on the panel instead of power-cycling it. + * + * During SR, drivers may choose to fully disable their crtc/encoder/bridge + * hardware (in which case no driver changes are necessary), or they can inspect + * &drm_crtc_state.self_refresh_active if they want to enter low power mode + * without full disable (in case full disable/enable is too slow). + * + * SR will be deactivated if there are any atomic updates affecting the + * pipe that is in SR mode. If a crtc is driving multiple connectors, all + * connectors must be SR aware and all will enter/exit SR mode at the same time. + * + * If the crtc and connector are SR aware, but the panel connected does not + * support it (or is otherwise unable to enter SR), the driver should fail + * atomic_check when &drm_crtc_state.self_refresh_active is true. + */ + +struct drm_self_refresh_data { + struct drm_crtc *crtc; + struct delayed_work entry_work; + struct drm_atomic_state *save_state; + unsigned int entry_delay_ms; +}; + +static void drm_self_refresh_helper_entry_work(struct work_struct *work) +{ + struct drm_self_refresh_data *sr_data = container_of( + to_delayed_work(work), + struct drm_self_refresh_data, entry_work); + struct drm_crtc *crtc = sr_data->crtc; + struct drm_device *dev = crtc->dev; + struct drm_modeset_acquire_ctx ctx; + struct drm_atomic_state *state; + struct drm_connector *conn; + struct drm_connector_state *conn_state; + struct drm_crtc_state *crtc_state; + int i, ret; + + drm_modeset_acquire_init(&ctx, 0); + + state = drm_atomic_state_alloc(dev); + if (!state) { + ret = -ENOMEM; + goto out; + } + +retry: + state->acquire_ctx = &ctx; + + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) { + ret = PTR_ERR(crtc_state); + goto out; + } + + if (!crtc_state->enable) + goto out; + + ret = drm_atomic_add_affected_connectors(state, crtc); + if (ret) + goto out; + + for_each_new_connector_in_state(state, conn, conn_state, i) { + if (!conn_state->self_refresh_aware) + goto out; + } + + crtc_state->active = false; + crtc_state->self_refresh_active = true; + + ret = drm_atomic_commit(state); + if (ret) + goto out; + +out: + if (ret == -EDEADLK) { + drm_atomic_state_clear(state); + ret = drm_modeset_backoff(&ctx); + if (!ret) + goto retry; + } + + drm_atomic_state_put(state); + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); +} + +/** + * drm_self_refresh_helper_alter_state - Alters the atomic state for SR exit + * @state: the state currently being checked + * + * Called at the end of atomic check. This function checks the state for flags + * incompatible with self refresh exit and changes them. This is a bit + * disingenuous since userspace is expecting one thing and we're giving it + * another. However in order to keep self refresh entirely hidden from + * userspace, this is required. + * + * At the end, we queue up the self refresh entry work so we can enter PSR after + * the desired delay. + */ +void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state) +{ + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + int i; + + if (state->async_update || !state->allow_modeset) { + for_each_old_crtc_in_state(state, crtc, crtc_state, i) { + if (crtc_state->self_refresh_active) { + state->async_update = false; + state->allow_modeset = true; + break; + } + } + } + + for_each_new_crtc_in_state(state, crtc, crtc_state, i) { + struct drm_self_refresh_data *sr_data; + + /* Don't trigger the entry timer when we're already in SR */ + if (crtc_state->self_refresh_active) + continue; + + sr_data = crtc->self_refresh_data; + if (!sr_data) + continue; + + mod_delayed_work(system_wq, &sr_data->entry_work, + msecs_to_jiffies(sr_data->entry_delay_ms)); + } +} +EXPORT_SYMBOL(drm_self_refresh_helper_alter_state); + +/** + * drm_self_refresh_helper_init - Initializes self refresh helpers for a crtc + * @crtc: the crtc which supports self refresh supported displays + * @entry_delay_ms: amount of inactivity to wait before entering self refresh + * + * Returns zero if successful or -errno on failure + */ +int drm_self_refresh_helper_init(struct drm_crtc *crtc, + unsigned int entry_delay_ms) +{ + struct drm_self_refresh_data *sr_data = crtc->self_refresh_data; + + /* Helper is already initialized */ + if (WARN_ON(sr_data)) + return -EINVAL; + + sr_data = kzalloc(sizeof(*sr_data), GFP_KERNEL); + if (!sr_data) + return -ENOMEM; + + INIT_DELAYED_WORK(&sr_data->entry_work, + drm_self_refresh_helper_entry_work); + sr_data->entry_delay_ms = entry_delay_ms; + sr_data->crtc = crtc; + + crtc->self_refresh_data = sr_data; + return 0; +} +EXPORT_SYMBOL(drm_self_refresh_helper_init); + +/** + * drm_self_refresh_helper_cleanup - Cleans up self refresh helpers for a crtc + * @crtc: the crtc to cleanup + */ +void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc) +{ + struct drm_self_refresh_data *sr_data = crtc->self_refresh_data; + + /* Helper is already uninitialized */ + if (sr_data) + return; + + crtc->self_refresh_data = NULL; + + cancel_delayed_work_sync(&sr_data->entry_work); + kfree(sr_data); +} +EXPORT_SYMBOL(drm_self_refresh_helper_cleanup); diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index f12215647801..927e1205d7aa 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -957,4 +957,19 @@ drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state) state->connectors_changed; } +/** + * drm_atomic_crtc_effectively_active - compute whether crtc is actually active + * @state: &drm_crtc_state for the CRTC + * + * When in self refresh mode, the crtc_state->active value will be false, since + * the crtc is off. However in some cases we're interested in whether the crtc + * is active, or effectively active (ie: it's connected to an active display). + * In these cases, use this function instead of just checking active. + */ +static inline bool +drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state) +{ + return state->active || state->self_refresh_active; +} + #endif /* DRM_ATOMIC_H_ */ diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 071143bc0ebd..c6f8486d8b8f 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -549,6 +549,20 @@ struct drm_connector_state { struct drm_tv_connector_state tv; /** + * @self_refresh_aware: + * + * This tracks whether a connector is aware of the self refresh state. + * It should be set to true for those connector implementations which + * understand the self refresh state. This is needed since the crtc + * registers the self refresh helpers and it doesn't know if the + * connectors downstream have implemented self refresh entry/exit. + * + * Drivers should set this to true in atomic_check if they know how to + * handle self_refresh requests. + */ + bool self_refresh_aware; + + /** * @picture_aspect_ratio: Connector property to control the * HDMI infoframe aspect ratio setting. * diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index dc42b9e35333..128d8b210621 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -54,6 +54,7 @@ struct drm_mode_set; struct drm_file; struct drm_clip_rect; struct drm_printer; +struct drm_self_refresh_data; struct device_node; struct dma_fence; struct edid; @@ -301,6 +302,17 @@ struct drm_crtc_state { bool vrr_enabled; /** + * @self_refresh_active: + * + * Used by the self refresh helpers to denote when a self refresh + * transition is occurring. This will be set on enable/disable callbacks + * when self refresh is being enabled or disabled. In some cases, it may + * not be desirable to fully shut off the crtc during self refresh. + * CRTC's can inspect this flag and determine the best course of action. + */ + bool self_refresh_active; + + /** * @event: * * Optional pointer to a DRM event to signal upon completion of the @@ -1088,6 +1100,13 @@ struct drm_crtc { * The name of the CRTC's fence timeline. */ char timeline_name[32]; + + /** + * @self_refresh_data: Holds the state for the self refresh helpers + * + * Initialized via drm_self_refresh_helper_register(). + */ + struct drm_self_refresh_data *self_refresh_data; }; /** diff --git a/include/drm/drm_self_refresh_helper.h b/include/drm/drm_self_refresh_helper.h new file mode 100644 index 000000000000..397a583ccca7 --- /dev/null +++ b/include/drm/drm_self_refresh_helper.h @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright (C) 2019 Google, Inc. + * + * Authors: + * Sean Paul <seanpaul@chromium.org> + */ +#ifndef DRM_SELF_REFRESH_HELPER_H_ +#define DRM_SELF_REFRESH_HELPER_H_ + +struct drm_atomic_state; +struct drm_crtc; + +void drm_self_refresh_helper_alter_state(struct drm_atomic_state *state); + +int drm_self_refresh_helper_init(struct drm_crtc *crtc, + unsigned int entry_delay_ms); + +void drm_self_refresh_helper_cleanup(struct drm_crtc *crtc); +#endif |