summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/thermal/exynos-thermal.txt14
-rw-r--r--Documentation/devicetree/bindings/thermal/imx-thermal.txt9
-rw-r--r--Documentation/devicetree/bindings/thermal/mediatek-thermal.txt1
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.txt1
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt3
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-thermal.txt7
-rw-r--r--Documentation/devicetree/bindings/thermal/uniphier-thermal.txt1
-rw-r--r--drivers/thermal/imx_thermal.c306
-rw-r--r--drivers/thermal/mtk_thermal.c40
-rw-r--r--drivers/thermal/qcom-spmi-temp-alarm.c92
-rw-r--r--drivers/thermal/qcom/tsens.c12
-rw-r--r--drivers/thermal/rcar_gen3_thermal.c17
-rw-r--r--drivers/thermal/rcar_thermal.c158
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c959
-rw-r--r--drivers/thermal/samsung/exynos_tmu.h75
-rw-r--r--drivers/thermal/tegra/soctherm.c31
-rw-r--r--drivers/thermal/ti-soc-thermal/omap5-thermal-data.c2
-rw-r--r--drivers/thermal/uniphier_thermal.c4
18 files changed, 851 insertions, 881 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index b957acff57aa..ad648d93d961 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -12,7 +12,6 @@
"samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
Exynos5420 (Must pass triminfo base and triminfo clock)
"samsung,exynos5433-tmu"
- "samsung,exynos5440-tmu"
"samsung,exynos7-tmu"
- interrupt-parent : The phandle for the interrupt controller
- reg : Address range of the thermal registers. For soc's which has multiple
@@ -68,18 +67,7 @@ Example 1):
#thermal-sensor-cells = <0>;
};
-Example 2):
-
- tmuctrl_0: tmuctrl@160118 {
- compatible = "samsung,exynos5440-tmu";
- reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
- clocks = <&clock 21>;
- clock-names = "tmu_apbif";
- #thermal-sensor-cells = <0>;
- };
-
-Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
tmu_cpu2: tmu@10068000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 379eb763073e..823e4176eef8 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -1,8 +1,13 @@
* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
Required properties:
-- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
- i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+- compatible : must be one of following:
+ - "fsl,imx6q-tempmon" for i.MX6Q,
+ - "fsl,imx6sx-tempmon" for i.MX6SX,
+ - "fsl,imx7d-tempmon" for i.MX7S/D.
+- interrupts : the interrupt output of the controller:
+ i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold,
+ i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
is higher than panic threshold, system will auto reboot by SRC module.
- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 0d73ea5e9c0c..41d6a443ad66 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -12,6 +12,7 @@ Required properties:
- "mediatek,mt8173-thermal" : For MT8173 family of SoCs
- "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- "mediatek,mt2712-thermal" : For MT2712 family of SoCs
+ - "mediatek,mt7622-thermal" : For MT7622 SoC
- reg: Address range of the thermal controller
- interrupts: IRQ for the thermal controller
- clocks, clock-names: Clocks needed for the thermal controller. required
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 292ed89d900b..06195e8f35e2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -8,6 +8,7 @@ Required properties:
- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #qcom,sensors: Number of sensors in tsens block
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
nvmem cells
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index 39e7d4e61a63..cfa154bb0fa7 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -9,6 +9,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
+ - "renesas,r8a77965-thermal" (R-Car M3-N)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
@@ -18,7 +19,7 @@ Required properties:
Optional properties:
-- interrupts : interrupts routed to the TSC (3 for H3 and M3-W)
+- interrupts : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 349e635f2d87..67c563f1b4c4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -3,7 +3,8 @@
Required properties:
- compatible : "renesas,thermal-<soctype>",
"renesas,rcar-gen2-thermal" (with thermal-zone) or
- "renesas,rcar-thermal" (without thermal-zone) as fallback.
+ "renesas,rcar-thermal" (without thermal-zone) as
+ fallback except R-Car D3.
Examples with soctypes are:
- "renesas,thermal-r8a73a4" (R-Mobile APE6)
- "renesas,thermal-r8a7743" (RZ/G1M)
@@ -12,13 +13,15 @@ Required properties:
- "renesas,thermal-r8a7791" (R-Car M2-W)
- "renesas,thermal-r8a7792" (R-Car V2H)
- "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a77995" (R-Car D3)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
Option properties:
-- interrupts : use interrupt
+- interrupts : If present should contain 3 interrupts for
+ R-Car D3 or 1 interrupt otherwise.
Example (non interrupt support):
diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
index 686c0b42ed3f..ceb92a95727a 100644
--- a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
- compatible :
- "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
- "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
+ - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
- interrupts : IRQ for the temperature alarm
- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index ee3a215b333a..334d98be03b9 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -1,11 +1,6 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include <linux/clk.h>
#include <linux/cpufreq.h>
@@ -31,35 +26,57 @@
#define REG_CLR 0x8
#define REG_TOG 0xc
-#define MISC0 0x0150
-#define MISC0_REFTOP_SELBIASOFF (1 << 3)
-#define MISC1 0x0160
-#define MISC1_IRQ_TEMPHIGH (1 << 29)
+/* i.MX6 specific */
+#define IMX6_MISC0 0x0150
+#define IMX6_MISC0_REFTOP_SELBIASOFF (1 << 3)
+#define IMX6_MISC1 0x0160
+#define IMX6_MISC1_IRQ_TEMPHIGH (1 << 29)
/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
-#define MISC1_IRQ_TEMPLOW (1 << 28)
-#define MISC1_IRQ_TEMPPANIC (1 << 27)
-
-#define TEMPSENSE0 0x0180
-#define TEMPSENSE0_ALARM_VALUE_SHIFT 20
-#define TEMPSENSE0_ALARM_VALUE_MASK (0xfff << TEMPSENSE0_ALARM_VALUE_SHIFT)
-#define TEMPSENSE0_TEMP_CNT_SHIFT 8
-#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
-#define TEMPSENSE0_FINISHED (1 << 2)
-#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
-#define TEMPSENSE0_POWER_DOWN (1 << 0)
-
-#define TEMPSENSE1 0x0190
-#define TEMPSENSE1_MEASURE_FREQ 0xffff
-/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
-#define TEMPSENSE2 0x0290
-#define TEMPSENSE2_LOW_VALUE_SHIFT 0
-#define TEMPSENSE2_LOW_VALUE_MASK 0xfff
-#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
-#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
+#define IMX6_MISC1_IRQ_TEMPLOW (1 << 28)
+#define IMX6_MISC1_IRQ_TEMPPANIC (1 << 27)
+
+#define IMX6_TEMPSENSE0 0x0180
+#define IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT 20
+#define IMX6_TEMPSENSE0_ALARM_VALUE_MASK (0xfff << 20)
+#define IMX6_TEMPSENSE0_TEMP_CNT_SHIFT 8
+#define IMX6_TEMPSENSE0_TEMP_CNT_MASK (0xfff << 8)
+#define IMX6_TEMPSENSE0_FINISHED (1 << 2)
+#define IMX6_TEMPSENSE0_MEASURE_TEMP (1 << 1)
+#define IMX6_TEMPSENSE0_POWER_DOWN (1 << 0)
+
+#define IMX6_TEMPSENSE1 0x0190
+#define IMX6_TEMPSENSE1_MEASURE_FREQ 0xffff
+#define IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT 0
#define OCOTP_MEM0 0x0480
#define OCOTP_ANA1 0x04e0
+/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
+#define IMX6_TEMPSENSE2 0x0290
+#define IMX6_TEMPSENSE2_LOW_VALUE_SHIFT 0
+#define IMX6_TEMPSENSE2_LOW_VALUE_MASK 0xfff
+#define IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT 16
+#define IMX6_TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
+
+/* i.MX7 specific */
+#define IMX7_ANADIG_DIGPROG 0x800
+#define IMX7_TEMPSENSE0 0x300
+#define IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT 18
+#define IMX7_TEMPSENSE0_PANIC_ALARM_MASK (0x1ff << 18)
+#define IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT 9
+#define IMX7_TEMPSENSE0_HIGH_ALARM_MASK (0x1ff << 9)
+#define IMX7_TEMPSENSE0_LOW_ALARM_SHIFT 0
+#define IMX7_TEMPSENSE0_LOW_ALARM_MASK 0x1ff
+
+#define IMX7_TEMPSENSE1 0x310
+#define IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT 16
+#define IMX7_TEMPSENSE1_MEASURE_FREQ_MASK (0xffff << 16)
+#define IMX7_TEMPSENSE1_FINISHED (1 << 11)
+#define IMX7_TEMPSENSE1_MEASURE_TEMP (1 << 10)
+#define IMX7_TEMPSENSE1_POWER_DOWN (1 << 9)
+#define IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT 0
+#define IMX7_TEMPSENSE1_TEMP_VALUE_MASK 0x1ff
+
/* The driver supports 1 passive trip point and 1 critical trip point */
enum imx_thermal_trip {
IMX_TRIP_PASSIVE,
@@ -72,17 +89,114 @@ enum imx_thermal_trip {
#define TEMPMON_IMX6Q 1
#define TEMPMON_IMX6SX 2
+#define TEMPMON_IMX7D 3
struct thermal_soc_data {
u32 version;
+
+ u32 sensor_ctrl;
+ u32 power_down_mask;
+ u32 measure_temp_mask;
+
+ u32 measure_freq_ctrl;
+ u32 measure_freq_mask;
+ u32 measure_freq_shift;
+
+ u32 temp_data;
+ u32 temp_value_mask;
+ u32 temp_value_shift;
+ u32 temp_valid_mask;
+
+ u32 panic_alarm_ctrl;
+ u32 panic_alarm_mask;
+ u32 panic_alarm_shift;
+
+ u32 high_alarm_ctrl;
+ u32 high_alarm_mask;
+ u32 high_alarm_shift;
+
+ u32 low_alarm_ctrl;
+ u32 low_alarm_mask;
+ u32 low_alarm_shift;
};
static struct thermal_soc_data thermal_imx6q_data = {
.version = TEMPMON_IMX6Q,
+
+ .sensor_ctrl = IMX6_TEMPSENSE0,
+ .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
+ .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
+
+ .measure_freq_ctrl = IMX6_TEMPSENSE1,
+ .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+ .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
+
+ .temp_data = IMX6_TEMPSENSE0,
+ .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
+ .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
+ .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
+
+ .high_alarm_ctrl = IMX6_TEMPSENSE0,
+ .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
+ .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
};
static struct thermal_soc_data thermal_imx6sx_data = {
.version = TEMPMON_IMX6SX,
+
+ .sensor_ctrl = IMX6_TEMPSENSE0,
+ .power_down_mask = IMX6_TEMPSENSE0_POWER_DOWN,
+ .measure_temp_mask = IMX6_TEMPSENSE0_MEASURE_TEMP,
+
+ .measure_freq_ctrl = IMX6_TEMPSENSE1,
+ .measure_freq_shift = IMX6_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+ .measure_freq_mask = IMX6_TEMPSENSE1_MEASURE_FREQ,
+
+ .temp_data = IMX6_TEMPSENSE0,
+ .temp_value_mask = IMX6_TEMPSENSE0_TEMP_CNT_MASK,
+ .temp_value_shift = IMX6_TEMPSENSE0_TEMP_CNT_SHIFT,
+ .temp_valid_mask = IMX6_TEMPSENSE0_FINISHED,
+
+ .high_alarm_ctrl = IMX6_TEMPSENSE0,
+ .high_alarm_mask = IMX6_TEMPSENSE0_ALARM_VALUE_MASK,
+ .high_alarm_shift = IMX6_TEMPSENSE0_ALARM_VALUE_SHIFT,
+
+ .panic_alarm_ctrl = IMX6_TEMPSENSE2,
+ .panic_alarm_mask = IMX6_TEMPSENSE2_PANIC_VALUE_MASK,
+ .panic_alarm_shift = IMX6_TEMPSENSE2_PANIC_VALUE_SHIFT,
+
+ .low_alarm_ctrl = IMX6_TEMPSENSE2,
+ .low_alarm_mask = IMX6_TEMPSENSE2_LOW_VALUE_MASK,
+ .low_alarm_shift = IMX6_TEMPSENSE2_LOW_VALUE_SHIFT,
+};
+
+static struct thermal_soc_data thermal_imx7d_data = {
+ .version = TEMPMON_IMX7D,
+
+ .sensor_ctrl = IMX7_TEMPSENSE1,
+ .power_down_mask = IMX7_TEMPSENSE1_POWER_DOWN,
+ .measure_temp_mask = IMX7_TEMPSENSE1_MEASURE_TEMP,
+
+ .measure_freq_ctrl = IMX7_TEMPSENSE1,
+ .measure_freq_shift = IMX7_TEMPSENSE1_MEASURE_FREQ_SHIFT,
+ .measure_freq_mask = IMX7_TEMPSENSE1_MEASURE_FREQ_MASK,
+
+ .temp_data = IMX7_TEMPSENSE1,
+ .temp_value_mask = IMX7_TEMPSENSE1_TEMP_VALUE_MASK,
+ .temp_value_shift = IMX7_TEMPSENSE1_TEMP_VALUE_SHIFT,
+ .temp_valid_mask = IMX7_TEMPSENSE1_FINISHED,
+
+ .panic_alarm_ctrl = IMX7_TEMPSENSE1,
+ .panic_alarm_mask = IMX7_TEMPSENSE0_PANIC_ALARM_MASK,
+ .panic_alarm_shift = IMX7_TEMPSENSE0_PANIC_ALARM_SHIFT,
+
+ .high_alarm_ctrl = IMX7_TEMPSENSE0,
+ .high_alarm_mask = IMX7_TEMPSENSE0_HIGH_ALARM_MASK,
+ .high_alarm_shift = IMX7_TEMPSENSE0_HIGH_ALARM_SHIFT,
+
+ .low_alarm_ctrl = IMX7_TEMPSENSE0,
+ .low_alarm_mask = IMX7_TEMPSENSE0_LOW_ALARM_MASK,
+ .low_alarm_shift = IMX7_TEMPSENSE0_LOW_ALARM_SHIFT,
};
struct imx_thermal_data {
@@ -107,31 +221,42 @@ struct imx_thermal_data {
static void imx_set_panic_temp(struct imx_thermal_data *data,
int panic_temp)
{
+ const struct thermal_soc_data *soc_data = data->socdata;
struct regmap *map = data->tempmon;
int critical_value;
critical_value = (data->c2 - panic_temp) / data->c1;
- regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK);
- regmap_write(map, TEMPSENSE2 + REG_SET, critical_value <<
- TEMPSENSE2_PANIC_VALUE_SHIFT);
+
+ regmap_write(map, soc_data->panic_alarm_ctrl + REG_CLR,
+ soc_data->panic_alarm_mask);
+ regmap_write(map, soc_data->panic_alarm_ctrl + REG_SET,
+ critical_value << soc_data->panic_alarm_shift);
}
static void imx_set_alarm_temp(struct imx_thermal_data *data,
int alarm_temp)
{
struct regmap *map = data->tempmon;
+ const struct thermal_soc_data *soc_data = data->socdata;
int alarm_value;
data->alarm_temp = alarm_temp;
- alarm_value = (data->c2 - alarm_temp) / data->c1;
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_ALARM_VALUE_MASK);
- regmap_write(map, TEMPSENSE0 + REG_SET, alarm_value <<
- TEMPSENSE0_ALARM_VALUE_SHIFT);
+
+ if (data->socdata->version == TEMPMON_IMX7D)
+ alarm_value = alarm_temp / 1000 + data->c1 - 25;
+ else
+ alarm_value = (data->c2 - alarm_temp) / data->c1;
+
+ regmap_write(map, soc_data->high_alarm_ctrl + REG_CLR,
+ soc_data->high_alarm_mask);
+ regmap_write(map, soc_data->high_alarm_ctrl + REG_SET,
+ alarm_value << soc_data->high_alarm_shift);
}
static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
{
struct imx_thermal_data *data = tz->devdata;
+ const struct thermal_soc_data *soc_data = data->socdata;
struct regmap *map = data->tempmon;
unsigned int n_meas;
bool wait;
@@ -139,16 +264,18 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
if (data->mode == THERMAL_DEVICE_ENABLED) {
/* Check if a measurement is currently in progress */
- regmap_read(map, TEMPSENSE0, &val);
- wait = !(val & TEMPSENSE0_FINISHED);
+ regmap_read(map, soc_data->temp_data, &val);
+ wait = !(val & soc_data->temp_valid_mask);
} else {
/*
* Every time we measure the temperature, we will power on the
* temperature sensor, enable measurements, take a reading,
* disable measurements, power off the temperature sensor.
*/
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
+ soc_data->power_down_mask);
+ regmap_write(map, soc_data->sensor_ctrl + REG_SET,
+ soc_data->measure_temp_mask);
wait = true;
}
@@ -160,22 +287,28 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
if (wait)
usleep_range(20, 50);
- regmap_read(map, TEMPSENSE0, &val);
+ regmap_read(map, soc_data->temp_data, &val);
if (data->mode != THERMAL_DEVICE_ENABLED) {
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
+ soc_data->measure_temp_mask);
+ regmap_write(map, soc_data->sensor_ctrl + REG_SET,
+ soc_data->power_down_mask);
}
- if ((val & TEMPSENSE0_FINISHED) == 0) {
+ if ((val & soc_data->temp_valid_mask) == 0) {
dev_dbg(&tz->device, "temp measurement never finished\n");
return -EAGAIN;
}
- n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
+ n_meas = (val & soc_data->temp_value_mask)
+ >> soc_data->temp_value_shift;
/* See imx_init_calib() for formula derivation */
- *temp = data->c2 - n_meas * data->c1;
+ if (data->socdata->version == TEMPMON_IMX7D)
+ *temp = (n_meas - data->c1 + 25) * 1000;
+ else
+ *temp = data->c2 - n_meas * data->c1;
/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
if (data->socdata->version == TEMPMON_IMX6Q) {
@@ -219,21 +352,26 @@ static int imx_set_mode(struct thermal_zone_device *tz,
{
struct imx_thermal_data *data = tz->devdata;
struct regmap *map = data->tempmon;
+ const struct thermal_soc_data *soc_data = data->socdata;
if (mode == THERMAL_DEVICE_ENABLED) {
tz->polling_delay = IMX_POLLING_DELAY;
tz->passive_delay = IMX_PASSIVE_DELAY;
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
+ soc_data->power_down_mask);
+ regmap_write(map, soc_data->sensor_ctrl + REG_SET,
+ soc_data->measure_temp_mask);
if (!data->irq_enabled) {
data->irq_enabled = true;
enable_irq(data->irq);
}
} else {
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
+ soc_data->measure_temp_mask);
+ regmap_write(map, soc_data->sensor_ctrl + REG_SET,
+ soc_data->power_down_mask);
tz->polling_delay = 0;
tz->passive_delay = 0;
@@ -355,6 +493,15 @@ static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1)
}
/*
+ * On i.MX7D, we only use the calibration data at 25C to get the temp,
+ * Tmeas = ( Nmeas - n1) + 25; n1 is the fuse value for 25C.
+ */
+ if (data->socdata->version == TEMPMON_IMX7D) {
+ data->c1 = (ocotp_ana1 >> 9) & 0x1ff;
+ return 0;
+ }
+
+ /*
* The sensor is calibrated at 25 °C (aka T1) and the value measured
* (aka N1) at this temperature is provided in bits [31:20] in the
* i.MX's OCOTP value ANA1.
@@ -492,6 +639,7 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
static const struct of_device_id of_imx_thermal_match[] = {
{ .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
{ .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
+ { .compatible = "fsl,imx7d-tempmon", .data = &thermal_imx7d_data, },
{ /* end */ }
};
MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
@@ -523,14 +671,15 @@ static int imx_thermal_probe(struct platform_device *pdev)
/* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
if (data->socdata->version == TEMPMON_IMX6SX) {
- regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH |
- MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC);
+ regmap_write(map, IMX6_MISC1 + REG_CLR,
+ IMX6_MISC1_IRQ_TEMPHIGH | IMX6_MISC1_IRQ_TEMPLOW
+ | IMX6_MISC1_IRQ_TEMPPANIC);
/*
* reset value of LOW ALARM is incorrect, set it to lowest
* value to avoid false trigger of low alarm.
*/
- regmap_write(map, TEMPSENSE2 + REG_SET,
- TEMPSENSE2_LOW_VALUE_MASK);
+ regmap_write(map, data->socdata->low_alarm_ctrl + REG_SET,
+ data->socdata->low_alarm_mask);
}
data->irq = platform_get_irq(pdev, 0);
@@ -557,11 +706,17 @@ static int imx_thermal_probe(struct platform_device *pdev)
}
/* Make sure sensor is in known good state for measurements */
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
- regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
- regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+ data->socdata->power_down_mask);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+ data->socdata->measure_temp_mask);
+ regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
+ data->socdata->measure_freq_mask);
+ if (data->socdata->version != TEMPMON_IMX7D)
+ regmap_write(map, IMX6_MISC0 + REG_SET,
+ IMX6_MISC0_REFTOP_SELBIASOFF);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+ data->socdata->power_down_mask);
data->policy = cpufreq_cpu_get(0);
if (!data->policy) {
@@ -626,16 +781,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
data->temp_passive / 1000);
/* Enable measurements at ~ 10 Hz */
- regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
+ regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
+ data->socdata->measure_freq_mask);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
- regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq);
+ regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
+ measure_freq << data->socdata->measure_freq_shift);
imx_set_alarm_temp(data, data->temp_passive);
if (data->socdata->version == TEMPMON_IMX6SX)
imx_set_panic_temp(data, data->temp_critical);
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+ data->socdata->power_down_mask);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+ data->socdata->measure_temp_mask);
data->irq_enabled = true;
data->mode = THERMAL_DEVICE_ENABLED;
@@ -661,7 +820,8 @@ static int imx_thermal_remove(struct platform_device *pdev)
struct regmap *map = data->tempmon;
/* Disable measurements */
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+ data->socdata->power_down_mask);
if (!IS_ERR(data->thermal_clk))
clk_disable_unprepare(data->thermal_clk);
@@ -684,8 +844,10 @@ static int imx_thermal_suspend(struct device *dev)
* temperature will be read as the thermal sensor is powered
* down.
*/
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+ data->socdata->measure_temp_mask);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+ data->socdata->power_down_mask);
data->mode = THERMAL_DEVICE_DISABLED;
clk_disable_unprepare(data->thermal_clk);
@@ -702,8 +864,10 @@ static int imx_thermal_resume(struct device *dev)
if (ret)
return ret;
/* Enabled thermal sensor after resume */
- regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
- regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
+ data->socdata->power_down_mask);
+ regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
+ data->socdata->measure_temp_mask);
data->mode = THERMAL_DEVICE_ENABLED;
return 0;
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index c75661a3801a..0691f260f6ea 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -153,6 +153,12 @@
/* The number of sensing points per bank */
#define MT2712_NUM_SENSORS_PER_ZONE 4
+#define MT7622_TEMP_AUXADC_CHANNEL 11
+#define MT7622_NUM_SENSORS 1
+#define MT7622_NUM_ZONES 1
+#define MT7622_NUM_SENSORS_PER_ZONE 1
+#define MT7622_TS1 0
+
struct mtk_thermal;
struct thermal_bank_cfg {
@@ -242,6 +248,12 @@ static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
+/* MT7622 thermal sensor data */
+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
+
/**
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -329,6 +341,25 @@ static const struct mtk_thermal_data mt2712_thermal_data = {
.sensor_mux_values = mt2712_mux_values,
};
+/*
+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
+ * access.
+ */
+static const struct mtk_thermal_data mt7622_thermal_data = {
+ .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT7622_NUM_ZONES,
+ .num_sensors = MT7622_NUM_SENSORS,
+ .bank_data = {
+ {
+ .num_sensors = 1,
+ .sensors = mt7622_bank_data,
+ },
+ },
+ .msr = mt7622_msr,
+ .adcpnp = mt7622_adcpnp,
+ .sensor_mux_values = mt7622_mux_values,
+};
+
/**
* raw_to_mcelsius - convert a raw ADC value to mcelsius
* @mt: The thermal controller
@@ -631,6 +662,10 @@ static const struct of_device_id mtk_thermal_of_match[] = {
{
.compatible = "mediatek,mt2712-thermal",
.data = (void *)&mt2712_thermal_data,
+ },
+ {
+ .compatible = "mediatek,mt7622-thermal",
+ .data = (void *)&mt7622_thermal_data,
}, {
},
};
@@ -642,7 +677,6 @@ static int mtk_thermal_probe(struct platform_device *pdev)
struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
struct mtk_thermal *mt;
struct resource *res;
- const struct of_device_id *of_id;
u64 auxadc_phys_base, apmixed_phys_base;
struct thermal_zone_device *tzdev;
@@ -650,9 +684,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
if (!mt)
return -ENOMEM;
- of_id = of_match_device(mtk_thermal_of_match, &pdev->dev);
- if (of_id)
- mt->conf = (const struct mtk_thermal_data *)of_id->data;
+ mt->conf = of_device_get_match_data(&pdev->dev);
mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
if (IS_ERR(mt->clk_peri_therm))
diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c
index 95f987d5aa71..ad4f3a8d6560 100644
--- a/drivers/thermal/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom-spmi-temp-alarm.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@
* GNU General Public License for more details.
*/
+#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/iio/consumer.h>
@@ -29,13 +30,17 @@
#define QPNP_TM_REG_ALARM_CTRL 0x46
#define QPNP_TM_TYPE 0x09
-#define QPNP_TM_SUBTYPE 0x08
+#define QPNP_TM_SUBTYPE_GEN1 0x08
+#define QPNP_TM_SUBTYPE_GEN2 0x09
-#define STATUS_STAGE_MASK 0x03
+#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0)
+#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
+#define STATUS_GEN2_STATE_SHIFT 4
-#define SHUTDOWN_CTRL1_THRESHOLD_MASK 0x03
+#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6)
+#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
-#define ALARM_CTRL_FORCE_ENABLE 0x80
+#define ALARM_CTRL_FORCE_ENABLE BIT(7)
/*
* Trip point values based on threshold control
@@ -58,6 +63,7 @@
struct qpnp_tm_chip {
struct regmap *map;
struct thermal_zone_device *tz_dev;
+ unsigned int subtype;
long temp;
unsigned int thresh;
unsigned int stage;
@@ -66,6 +72,9 @@ struct qpnp_tm_chip {
struct iio_channel *adc;
};
+/* This array maps from GEN2 alarm state to GEN1 alarm stage */
+static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
+
static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
{
unsigned int val;
@@ -84,30 +93,59 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
return regmap_write(chip->map, chip->base + addr, data);
}
+/**
+ * qpnp_tm_get_temp_stage() - return over-temperature stage
+ * @chip: Pointer to the qpnp_tm chip
+ *
+ * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
+ */
+static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
+{
+ int ret;
+ u8 reg = 0;
+
+ ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+ if (ret < 0)
+ return ret;
+
+ if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
+ ret = reg & STATUS_GEN1_STAGE_MASK;
+ else
+ ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
+
+ return ret;
+}
+
/*
* This function updates the internal temp value based on the
* current thermal stage and threshold as well as the previous stage
*/
static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
{
- unsigned int stage;
+ unsigned int stage, stage_new, stage_old;
int ret;
- u8 reg = 0;
- ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+ ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
+ stage = ret;
- stage = reg & STATUS_STAGE_MASK;
+ if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
+ stage_new = stage;
+ stage_old = chip->stage;
+ } else {
+ stage_new = alarm_state_map[stage];
+ stage_old = alarm_state_map[chip->stage];
+ }
- if (stage > chip->stage) {
+ if (stage_new > stage_old) {
/* increasing stage, use lower bound */
- chip->temp = (stage - 1) * TEMP_STAGE_STEP +
+ chip->temp = (stage_new - 1) * TEMP_STAGE_STEP +
chip->thresh * TEMP_THRESH_STEP +
TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
- } else if (stage < chip->stage) {
+ } else if (stage_new < stage_old) {
/* decreasing stage, use upper bound */
- chip->temp = stage * TEMP_STAGE_STEP +
+ chip->temp = stage_new * TEMP_STAGE_STEP +
chip->thresh * TEMP_THRESH_STEP -
TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
}
@@ -162,28 +200,37 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
*/
static int qpnp_tm_init(struct qpnp_tm_chip *chip)
{
+ unsigned int stage;
int ret;
- u8 reg;
+ u8 reg = 0;
- chip->thresh = THRESH_MIN;
+ ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
+ if (ret < 0)
+ return ret;
+
+ chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
chip->temp = DEFAULT_TEMP;
- ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
+ ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
+ chip->stage = ret;
- chip->stage = reg & STATUS_STAGE_MASK;
+ stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
+ ? chip->stage : alarm_state_map[chip->stage];
- if (chip->stage)
+ if (stage)
chip->temp = chip->thresh * TEMP_THRESH_STEP +
- (chip->stage - 1) * TEMP_STAGE_STEP +
+ (stage - 1) * TEMP_STAGE_STEP +
TEMP_THRESH_MIN;
/*
* Set threshold and disable software override of stage 2 and 3
* shutdowns.
*/
- reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
+ chip->thresh = THRESH_MIN;
+ reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK);
+ reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
if (ret < 0)
return ret;
@@ -246,12 +293,15 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return ret;
}
- if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) {
+ if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
+ && subtype != QPNP_TM_SUBTYPE_GEN2)) {
dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
type, subtype);
return -ENODEV;
}
+ chip->subtype = subtype;
+
ret = qpnp_tm_init(chip);
if (ret < 0) {
dev_err(&pdev->dev, "init failed\n");
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index c2c34425279d..3440166c2ae9 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -115,6 +115,7 @@ static int tsens_probe(struct platform_device *pdev)
struct tsens_device *tmdev;
const struct tsens_data *data;
const struct of_device_id *id;
+ u32 num_sensors;
if (pdev->dev.of_node)
dev = &pdev->dev;
@@ -129,19 +130,24 @@ static int tsens_probe(struct platform_device *pdev)
else
data = &data_8960;
- if (data->num_sensors <= 0) {
+ num_sensors = data->num_sensors;
+
+ if (np)
+ of_property_read_u32(np, "#qcom,sensors", &num_sensors);
+
+ if (num_sensors <= 0) {
dev_err(dev, "invalid number of sensors\n");
return -EINVAL;
}
tmdev = devm_kzalloc(dev,
- struct_size(tmdev, sensor, data->num_sensors),
+ struct_size(tmdev, sensor, num_sensors),
GFP_KERNEL);
if (!tmdev)
return -ENOMEM;
tmdev->dev = dev;
- tmdev->num_sensors = data->num_sensors;
+ tmdev->num_sensors = num_sensors;
tmdev->ops = data->ops;
for (i = 0; i < tmdev->num_sensors; i++) {
if (data->hw_ids)
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 561a0a332208..766521eb7071 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -132,7 +132,7 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
#define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
/* no idea where these constants come from */
-#define TJ_1 96
+#define TJ_1 116
#define TJ_3 -41
static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
@@ -146,7 +146,7 @@ static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
* Division is not scaled in BSP and if scaled it might overflow
* the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
*/
- tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 137)
+ tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
/ (ptat[0] - ptat[2])) - FIXPT_INT(41);
coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
@@ -207,8 +207,8 @@ static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
{
struct rcar_gen3_thermal_tsc *tsc = devdata;
- low = clamp_val(low, -40000, 125000);
- high = clamp_val(high, -40000, 125000);
+ low = clamp_val(low, -40000, 120000);
+ high = clamp_val(high, -40000, 120000);
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
@@ -329,6 +329,7 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
{ .compatible = "renesas,r8a7795-thermal", },
{ .compatible = "renesas,r8a7796-thermal", },
+ { .compatible = "renesas,r8a77965-thermal", },
{},
};
MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
@@ -354,11 +355,11 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
/* default values if FUSEs are missing */
/* TODO: Read values from hardware on supported platforms */
- int ptat[3] = { 2351, 1509, 435 };
+ int ptat[3] = { 2631, 1509, 435 };
int thcode[TSC_MAX_NUM][3] = {
- { 3248, 2800, 2221 },
- { 3245, 2795, 2216 },
- { 3250, 2805, 2237 },
+ { 3397, 2800, 2221 },
+ { 3393, 2795, 2216 },
+ { 3389, 2805, 2237 },
};
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee6cf1d..45fb284d4c11 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -58,10 +58,47 @@ struct rcar_thermal_common {
spinlock_t lock;
};
+struct rcar_thermal_chip {
+ unsigned int use_of_thermal : 1;
+ unsigned int has_filonoff : 1;
+ unsigned int irq_per_ch : 1;
+ unsigned int needs_suspend_resume : 1;
+ unsigned int nirqs;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+ .use_of_thermal = 0,
+ .has_filonoff = 1,
+ .irq_per_ch = 0,
+ .needs_suspend_resume = 0,
+ .nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+ .use_of_thermal = 1,
+ .has_filonoff = 1,
+ .irq_per_ch = 0,
+ .needs_suspend_resume = 0,
+ .nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+ .use_of_thermal = 1,
+ .has_filonoff = 0,
+ .irq_per_ch = 1,
+ .needs_suspend_resume = 1,
+ /*
+ * The Gen3 chip has 3 interrupts, but this driver uses only 2
+ * interrupts to detect a temperature change, rise or fall.
+ */
+ .nirqs = 2,
+};
+
struct rcar_thermal_priv {
void __iomem *base;
struct rcar_thermal_common *common;
struct thermal_zone_device *zone;
+ const struct rcar_thermal_chip *chip;
struct delayed_work work;
struct mutex lock;
struct list_head list;
@@ -77,13 +114,20 @@ struct rcar_thermal_priv {
#define rcar_priv_to_dev(priv) ((priv)->common->dev)
#define rcar_has_irq_support(priv) ((priv)->common->base)
#define rcar_id_to_shift(priv) ((priv)->id * 8)
-#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL)
-#define USE_OF_THERMAL 1
static const struct of_device_id rcar_thermal_dt_ids[] = {
- { .compatible = "renesas,rcar-thermal", },
- { .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+ {
+ .compatible = "renesas,rcar-thermal",
+ .data = &rcar_thermal,
+ },
+ {
+ .compatible = "renesas,rcar-gen2-thermal",
+ .data = &rcar_gen2_thermal,
+ },
+ {
+ .compatible = "renesas,thermal-r8a77995",
+ .data = &rcar_gen3_thermal,
+ },
{},
};
MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,7 +234,8 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
* enable IRQ
*/
if (rcar_has_irq_support(priv)) {
- rcar_thermal_write(priv, FILONOFF, 0);
+ if (priv->chip->has_filonoff)
+ rcar_thermal_write(priv, FILONOFF, 0);
/* enable Rising/Falling edge interrupt */
rcar_thermal_write(priv, POSNEG, 0x1);
@@ -420,7 +465,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
- if (rcar_use_of_thermal(dev))
+ if (priv->chip->use_of_thermal)
thermal_remove_hwmon_sysfs(priv->zone);
else
thermal_zone_device_unregister(priv->zone);
@@ -438,6 +483,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
struct rcar_thermal_priv *priv;
struct device *dev = &pdev->dev;
struct resource *res, *irq;
+ const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
int mres = 0;
int i;
int ret = -ENODEV;
@@ -457,19 +503,35 @@ static int rcar_thermal_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq) {
- /*
- * platform has IRQ support.
- * Then, driver uses common registers
- * rcar_has_irq_support() will be enabled
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
- common->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(common->base))
- return PTR_ERR(common->base);
+ for (i = 0; i < chip->nirqs; i++) {
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq)
+ continue;
+ if (!common->base) {
+ /*
+ * platform has IRQ support.
+ * Then, driver uses common registers
+ * rcar_has_irq_support() will be enabled
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM,
+ mres++);
+ common->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(common->base))
+ return PTR_ERR(common->base);
+
+ idle = 0; /* polling delay is not needed */
+ }
- idle = 0; /* polling delay is not needed */
+ ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+ IRQF_SHARED, dev_name(dev), common);
+ if (ret) {
+ dev_err(dev, "irq request failed\n ");
+ goto error_unregister;
+ }
+
+ /* update ENR bits */
+ if (chip->irq_per_ch)
+ enr_bits |= 1 << i;
}
for (i = 0;; i++) {
@@ -491,6 +553,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
priv->common = common;
priv->id = i;
+ priv->chip = chip;
mutex_init(&priv->lock);
INIT_LIST_HEAD(&priv->list);
INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
@@ -498,7 +561,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
if (ret < 0)
goto error_unregister;
- if (rcar_use_of_thermal(dev))
+ if (chip->use_of_thermal)
priv->zone = devm_thermal_zone_of_sensor_register(
dev, i, priv,
&rcar_thermal_zone_of_ops);
@@ -515,7 +578,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
goto error_unregister;
}
- if (rcar_use_of_thermal(dev)) {
+ if (chip->use_of_thermal) {
/*
* thermal_zone doesn't enable hwmon as default,
* but, enable it here to keep compatible
@@ -531,20 +594,12 @@ static int rcar_thermal_probe(struct platform_device *pdev)
list_move_tail(&priv->list, &common->head);
/* update ENR bits */
- enr_bits |= 3 << (i * 8);
+ if (!chip->irq_per_ch)
+ enr_bits |= 3 << (i * 8);
}
- /* enable temperature comparation */
- if (irq) {
- ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
- dev_name(dev), common);
- if (ret) {
- dev_err(dev, "irq request failed\n ");
- goto error_unregister;
- }
-
+ if (enr_bits)
rcar_thermal_common_write(common, ENR, enr_bits);
- }
dev_info(dev, "%d sensor probed\n", i);
@@ -556,9 +611,48 @@ error_unregister:
return ret;
}
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+ typeof(*priv), list);
+
+ if (priv->chip->needs_suspend_resume) {
+ rcar_thermal_common_write(common, ENR, 0);
+ rcar_thermal_irq_disable(priv);
+ rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+ }
+
+ return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+ struct rcar_thermal_common *common = dev_get_drvdata(dev);
+ struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+ typeof(*priv), list);
+ int ret;
+
+ if (priv->chip->needs_suspend_resume) {
+ ret = rcar_thermal_update_temp(priv);
+ if (ret < 0)
+ return ret;
+ rcar_thermal_irq_enable(priv);
+ rcar_thermal_common_write(common, ENR, 0x03);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+ rcar_thermal_resume);
+
static struct platform_driver rcar_thermal_driver = {
.driver = {
.name = "rcar_thermal",
+ .pm = &rcar_thermal_pm_ops,
.of_match_table = rcar_thermal_dt_ids,
},
.probe = rcar_thermal_probe,
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index ac83f721db24..a992e51ef065 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -29,13 +29,14 @@
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
-#include "exynos_tmu.h"
+#include <dt-bindings/thermal/thermal_exynos.h>
+
#include "../thermal_core.h"
/* Exynos generic registers */
@@ -75,9 +76,6 @@
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
-#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
-#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
#define EXYNOS_EMUL_TIME 0x57F0
@@ -98,11 +96,6 @@
#define EXYNOS4412_MUX_ADDR_SHIFT 20
/* Exynos5433 specific registers */
-#define EXYNOS5433_TMU_REG_CONTROL1 0x024
-#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c
-#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030
-#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034
-#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044
#define EXYNOS5433_THD_TEMP_RISE3_0 0x050
#define EXYNOS5433_THD_TEMP_RISE7_4 0x054
#define EXYNOS5433_THD_TEMP_FALL3_0 0x060
@@ -123,27 +116,7 @@
#define EXYNOS5433_PD_DET_EN 1
-/*exynos5440 specific registers*/
-#define EXYNOS5440_TMU_S0_7_TRIM 0x000
-#define EXYNOS5440_TMU_S0_7_CTRL 0x020
-#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
-#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
-#define EXYNOS5440_TMU_S0_7_TH0 0x110
-#define EXYNOS5440_TMU_S0_7_TH1 0x130
-#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
-#define EXYNOS5440_TMU_S0_7_IRQ 0x230
-/* exynos5440 common registers */
-#define EXYNOS5440_TMU_IRQ_STATUS 0x000
-#define EXYNOS5440_TMU_PMIN 0x004
-
-#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
-#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
-#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
-#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
-#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
+#define EXYNOS5433_G3D_BASE 0x10070000
/* Exynos7 specific registers */
#define EXYNOS7_THD_TEMP_RISE7_6 0x50
@@ -155,22 +128,32 @@
#define EXYNOS7_TMU_TEMP_MASK 0x1ff
#define EXYNOS7_PD_DET_EN_SHIFT 23
#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1
-#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2
-#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3
-#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4
-#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5
-#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6
-#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7
#define EXYNOS7_EMUL_DATA_SHIFT 7
#define EXYNOS7_EMUL_DATA_MASK 0x1ff
+#define EXYNOS_FIRST_POINT_TRIM 25
+#define EXYNOS_SECOND_POINT_TRIM 85
+
+#define EXYNOS_NOISE_CANCEL_MODE 4
+
#define MCELSIUS 1000
+
+enum soc_type {
+ SOC_ARCH_EXYNOS3250 = 1,
+ SOC_ARCH_EXYNOS4210,
+ SOC_ARCH_EXYNOS4412,
+ SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5260,
+ SOC_ARCH_EXYNOS5420,
+ SOC_ARCH_EXYNOS5420_TRIMINFO,
+ SOC_ARCH_EXYNOS5433,
+ SOC_ARCH_EXYNOS7,
+};
+
/**
* struct exynos_tmu_data : A structure to hold the private data of the TMU
driver
* @id: identifier of the one instance of the TMU controller.
- * @pdata: pointer to the tmu platform/configuration data
* @base: base address of the single instance of the TMU controller.
* @base_second: base address of the common registers of the TMU controller.
* @irq: irq number of the TMU controller.
@@ -180,8 +163,17 @@
* @clk: pointer to the clock structure.
* @clk_sec: pointer to the clock structure for accessing the base_second.
* @sclk: pointer to the clock structure for accessing the tmu special clk.
+ * @cal_type: calibration type for temperature
+ * @efuse_value: SoC defined fuse value
+ * @min_efuse_value: minimum valid trimming data
+ * @max_efuse_value: maximum valid trimming data
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
+ * @gain: gain of amplifier in the positive-TC generator block
+ * 0 < gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ * in the positive-TC generator block
+ * 0 < reference_voltage <= 31
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
* @ntrip: number of supported trip points.
@@ -194,7 +186,6 @@
*/
struct exynos_tmu_data {
int id;
- struct exynos_tmu_platform_data *pdata;
void __iomem *base;
void __iomem *base_second;
int irq;
@@ -202,71 +193,42 @@ struct exynos_tmu_data {
struct work_struct irq_work;
struct mutex lock;
struct clk *clk, *clk_sec, *sclk;
+ u32 cal_type;
+ u32 efuse_value;
+ u32 min_efuse_value;
+ u32 max_efuse_value;
u16 temp_error1, temp_error2;
+ u8 gain;
+ u8 reference_voltage;
struct regulator *regulator;
struct thermal_zone_device *tzd;
unsigned int ntrip;
bool enabled;
- int (*tmu_initialize)(struct platform_device *pdev);
+ void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
+ u8 temp);
+ void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
+ u8 temp, u8 hyst);
+ void (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
int (*tmu_read)(struct exynos_tmu_data *data);
void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
};
-static void exynos_report_trigger(struct exynos_tmu_data *p)
-{
- char data[10], *envp[] = { data, NULL };
- struct thermal_zone_device *tz = p->tzd;
- int temp;
- unsigned int i;
-
- if (!tz) {
- pr_err("No thermal zone device defined\n");
- return;
- }
-
- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- mutex_lock(&tz->lock);
- /* Find the level for which trip happened */
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- tz->ops->get_trip_temp(tz, i, &temp);
- if (tz->last_temperature < temp)
- break;
- }
-
- snprintf(data, sizeof(data), "%u", i);
- kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
- mutex_unlock(&tz->lock);
-}
-
/*
* TMU treats temperature as a mapped temperature code.
* The temperature is converted differently depending on the calibration type.
*/
static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp_code;
-
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp_code = (temp - pdata->first_point_trim) *
- (data->temp_error2 - data->temp_error1) /
- (pdata->second_point_trim - pdata->first_point_trim) +
- data->temp_error1;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp_code = temp + data->temp_error1 - pdata->first_point_trim;
- break;
- default:
- temp_code = temp + pdata->default_temp_offset;
- break;
- }
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM;
- return temp_code;
+ return (temp - EXYNOS_FIRST_POINT_TRIM) *
+ (data->temp_error2 - data->temp_error1) /
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) +
+ data->temp_error1;
}
/*
@@ -275,120 +237,123 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
*/
static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
- int temp;
-
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- temp = (temp_code - data->temp_error1) *
- (pdata->second_point_trim - pdata->first_point_trim) /
- (data->temp_error2 - data->temp_error1) +
- pdata->first_point_trim;
- break;
- case TYPE_ONE_POINT_TRIMMING:
- temp = temp_code - data->temp_error1 + pdata->first_point_trim;
- break;
- default:
- temp = temp_code - pdata->default_temp_offset;
- break;
- }
+ if (data->cal_type == TYPE_ONE_POINT_TRIMMING)
+ return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM;
- return temp;
+ return (temp_code - data->temp_error1) *
+ (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) /
+ (data->temp_error2 - data->temp_error1) +
+ EXYNOS_FIRST_POINT_TRIM;
}
static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
+ u16 tmu_temp_mask =
+ (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK
+ : EXYNOS_TMU_TEMP_MASK;
- data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
+ data->temp_error1 = trim_info & tmu_temp_mask;
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
- (pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value))
- data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+ (data->min_efuse_value > data->temp_error1) ||
+ (data->temp_error1 > data->max_efuse_value))
+ data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK;
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
+ (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
}
-static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
+static int exynos_tmu_initialize(struct platform_device *pdev)
{
- struct thermal_zone_device *tz = data->tzd;
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct thermal_zone_device *tzd = data->tzd;
const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tz);
- unsigned long temp;
- int i;
+ of_thermal_get_trip_points(tzd);
+ unsigned int status;
+ int ret = 0, temp, hyst;
if (!trips) {
- pr_err("%s: Cannot get trip points from of-thermal.c!\n",
- __func__);
- return 0;
+ dev_err(&pdev->dev,
+ "Cannot get trip points from device tree!\n");
+ return -ENODEV;
}
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL)
- continue;
-
- temp = trips[i].temperature / MCELSIUS;
- if (falling)
- temp -= (trips[i].hysteresis / MCELSIUS);
- else
- threshold &= ~(0xff << 8 * i);
-
- threshold |= temp_to_code(data, temp) << 8 * i;
+ if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
+ ret = tzd->ops->get_crit_temp(tzd, &temp);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "No CRITICAL trip point defined in device tree!\n");
+ goto out;
}
- return threshold;
-}
-
-static int exynos_tmu_initialize(struct platform_device *pdev)
-{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- int ret;
-
- if (of_thermal_get_ntrips(data->tzd) > data->ntrip) {
+ if (of_thermal_get_ntrips(tzd) > data->ntrip) {
dev_info(&pdev->dev,
"More trip points than supported by this TMU.\n");
dev_info(&pdev->dev,
"%d trip points should be configured in polling mode.\n",
- (of_thermal_get_ntrips(data->tzd) - data->ntrip));
+ (of_thermal_get_ntrips(tzd) - data->ntrip));
}
mutex_lock(&data->lock);
clk_enable(data->clk);
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
- ret = data->tmu_initialize(pdev);
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ } else {
+ int i, ntrips =
+ min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+
+ data->tmu_initialize(pdev);
+
+ /* Write temperature code for rising and falling threshold */
+ for (i = 0; i < ntrips; i++) {
+ /* Write temperature code for rising threshold */
+ ret = tzd->ops->get_trip_temp(tzd, i, &temp);
+ if (ret)
+ goto err;
+ temp /= MCELSIUS;
+ data->tmu_set_trip_temp(data, i, temp);
+
+ /* Write temperature code for falling threshold */
+ ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+ if (ret)
+ goto err;
+ hyst /= MCELSIUS;
+ data->tmu_set_trip_hyst(data, i, temp, hyst);
+ }
+
+ data->tmu_clear_irqs(data);
+ }
+err:
clk_disable(data->clk);
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
-
+out:
return ret;
}
static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
{
- struct exynos_tmu_platform_data *pdata = data->pdata;
-
if (data->soc == SOC_ARCH_EXYNOS4412 ||
data->soc == SOC_ARCH_EXYNOS3250)
con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
- con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
+ con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
- con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
- if (pdata->noise_cancel_mode) {
- con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
- con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
- }
+ con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+ con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT);
return con;
}
@@ -405,65 +370,70 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
mutex_unlock(&data->lock);
}
-static int exynos4210_tmu_initialize(struct platform_device *pdev)
+static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
const struct thermal_trip * const trips =
- of_thermal_get_trip_points(tz);
- int ret = 0, threshold_code, i;
- unsigned long reference, temp;
- unsigned int status;
+ of_thermal_get_trip_points(data->tzd);
+ u8 ref, th_code;
- if (!trips) {
- pr_err("%s: Cannot get trip points from of-thermal.c!\n",
- __func__);
- ret = -ENODEV;
- goto out;
- }
+ ref = trips[0].temperature / MCELSIUS;
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
+ if (trip == 0) {
+ th_code = temp_to_code(data, ref);
+ writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}
+ temp -= ref;
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+}
+
+/* failing thresholds are not supported on Exynos4210 */
+static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+}
+
+static void exynos4210_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
+}
- /* Write temperature code for threshold */
- reference = trips[0].temperature / MCELSIUS;
- threshold_code = temp_to_code(data, reference);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
- writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ u32 th, con;
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- temp = trips[i].temperature / MCELSIUS;
- writeb(temp - reference, data->base +
- EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 8 * trip);
+ th |= temp_to_code(data, temp) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ if (trip == 3) {
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
+}
- data->tmu_clear_irqs(data);
-out:
- return ret;
+static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_FALL);
+ th &= ~(0xff << 8 * trip);
+ if (hyst)
+ th |= temp_to_code(data, temp - hyst) << 8 * trip;
+ writel(th, data->base + EXYNOS_THD_TEMP_FALL);
}
-static int exynos4412_tmu_initialize(struct platform_device *pdev)
+static void exynos4412_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- const struct thermal_trip * const trips =
- of_thermal_get_trip_points(data->tzd);
- unsigned int status, trim_info, con, ctrl, rising_threshold;
- int ret = 0, threshold_code, i;
- unsigned long crit_temp = 0;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info, ctrl;
if (data->soc == SOC_ARCH_EXYNOS3250 ||
data->soc == SOC_ARCH_EXYNOS4412 ||
@@ -485,58 +455,53 @@ static int exynos4412_tmu_initialize(struct platform_device *pdev)
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
+}
- /* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
-
- data->tmu_clear_irqs(data);
+static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
+{
+ unsigned int reg_off, j;
+ u32 th;
- /* if last threshold limit is also present */
- for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
- if (trips[i].type == THERMAL_TRIP_CRITICAL) {
- crit_temp = trips[i].temperature;
- break;
- }
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
+ j = trip;
}
- if (i == of_thermal_get_ntrips(data->tzd)) {
- pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
- __func__);
- ret = -EINVAL;
- goto out;
- }
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp) << j * 8);
+ writel(th, data->base + reg_off);
+}
- threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
- con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, j;
+ u32 th;
-out:
- return ret;
+ if (trip > 3) {
+ reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
+ j = trip - 4;
+ } else {
+ reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
+ j = trip;
+ }
+
+ th = readl(data->base + reg_off);
+ th &= ~(0xff << j * 8);
+ th |= (temp_to_code(data, temp - hyst) << j * 8);
+ writel(th, data->base + reg_off);
}
-static int exynos5433_tmu_initialize(struct platform_device *pdev)
+static void exynos5433_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- struct thermal_zone_device *tz = data->tzd;
- unsigned int status, trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int temp, temp_hist;
- int ret = 0, threshold_code, i, sensor_id, cal_type;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info;
+ int sensor_id, cal_type;
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
sanitize_temp_error(data, trim_info);
@@ -552,227 +517,84 @@ static int exynos5433_tmu_initialize(struct platform_device *pdev)
>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
switch (cal_type) {
- case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
- pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
- break;
case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
- pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
+ data->cal_type = TYPE_TWO_POINT_TRIMMING;
break;
+ case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
default:
- pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
break;
}
dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
cal_type ? 2 : 1);
-
- /* Write temperature code for rising and falling threshold */
- for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
- int rising_reg_offset, falling_reg_offset;
- int j = 0;
-
- switch (i) {
- case 0:
- case 1:
- case 2:
- case 3:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
- j = i;
- break;
- case 4:
- case 5:
- case 6:
- case 7:
- rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
- falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
- j = i - 4;
- break;
- default:
- continue;
- }
-
- /* Write temperature code for rising threshold */
- tz->ops->get_trip_temp(tz, i, &temp);
- temp /= MCELSIUS;
- threshold_code = temp_to_code(data, temp);
-
- rising_threshold = readl(data->base + rising_reg_offset);
- rising_threshold |= (threshold_code << j * 8);
- writel(rising_threshold, data->base + rising_reg_offset);
-
- /* Write temperature code for falling threshold */
- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
- threshold_code = temp_to_code(data, temp_hist);
-
- falling_threshold = readl(data->base + falling_reg_offset);
- falling_threshold &= ~(0xff << j * 8);
- falling_threshold |= (threshold_code << j * 8);
- writel(falling_threshold, data->base + falling_reg_offset);
- }
-
- data->tmu_clear_irqs(data);
-out:
- return ret;
}
-static int exynos5440_tmu_initialize(struct platform_device *pdev)
+static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
+ int trip, u8 temp)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- unsigned int trim_info = 0, con, rising_threshold;
- int threshold_code;
- int crit_temp = 0;
+ unsigned int reg_off, bit_off;
+ u32 th;
- /*
- * For exynos5440 soc triminfo value is swapped between TMU0 and
- * TMU2, so the below logic is needed.
- */
- switch (data->id) {
- case 0:
- trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
- EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 1:
- trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
- break;
- case 2:
- trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
- EXYNOS5440_TMU_S0_7_TRIM);
- }
- sanitize_temp_error(data, trim_info);
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
- /* Write temperature code for rising and falling threshold */
- rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
- rising_threshold = get_th_reg(data, rising_threshold, false);
- writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
- writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
+ th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+}
- data->tmu_clear_irqs(data);
+static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
+ int trip, u8 temp, u8 hyst)
+{
+ unsigned int reg_off, bit_off;
+ u32 th;
- /* if last threshold limit is also present */
- if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
- threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
- /* 5th level to be assigned in th2 reg */
- rising_threshold =
- threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
- writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
- con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
- }
- /* Clear the PMIN in the common TMU register */
- if (!data->id)
- writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
+ reg_off = ((7 - trip) / 2) * 4;
+ bit_off = ((8 - trip) % 2);
- return 0;
+ th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+ th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
+ th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
+ writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
}
-static int exynos7_tmu_initialize(struct platform_device *pdev)
+static void exynos7_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- struct exynos_tmu_platform_data *pdata = data->pdata;
- unsigned int status, trim_info;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i;
- int temp, temp_hist;
- unsigned int reg_off, bit_off;
-
- status = readb(data->base + EXYNOS_TMU_REG_STATUS);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
+ unsigned int trim_info;
trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
-
- data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
- if (!data->temp_error1 ||
- (pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value))
- data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
-
- /* Write temperature code for rising and falling threshold */
- for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
- /*
- * On exynos7 there are 4 rising and 4 falling threshold
- * registers (0x50-0x5c and 0x60-0x6c respectively). Each
- * register holds the value of two threshold levels (at bit
- * offsets 0 and 16). Based on the fact that there are atmost
- * eight possible trigger levels, calculate the register and
- * bit offsets where the threshold levels are to be written.
- *
- * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
- * [24:16] - Threshold level 7
- * [8:0] - Threshold level 6
- * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
- * [24:16] - Threshold level 5
- * [8:0] - Threshold level 4
- *
- * and similarly for falling thresholds.
- *
- * Based on the above, calculate the register and bit offsets
- * for rising/falling threshold levels and populate them.
- */
- reg_off = ((7 - i) / 2) * 4;
- bit_off = ((8 - i) % 2);
-
- tz->ops->get_trip_temp(tz, i, &temp);
- temp /= MCELSIUS;
-
- tz->ops->get_trip_hyst(tz, i, &temp_hist);
- temp_hist = temp - (temp_hist / MCELSIUS);
-
- /* Set 9-bit temperature code for rising threshold levels */
- threshold_code = temp_to_code(data, temp);
- rising_threshold = readl(data->base +
- EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
- rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- rising_threshold |= threshold_code << (16 * bit_off);
- writel(rising_threshold,
- data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
-
- /* Set 9-bit temperature code for falling threshold levels */
- threshold_code = temp_to_code(data, temp_hist);
- falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- falling_threshold |= threshold_code << (16 * bit_off);
- writel(falling_threshold,
- data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
- }
-
- data->tmu_clear_irqs(data);
-out:
- return ret;
+ sanitize_temp_error(data, trim_info);
}
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
+ unsigned int con, interrupt_en = 0, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
+ }
if (data->soc != SOC_ARCH_EXYNOS4210)
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
}
+
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
@@ -781,36 +603,25 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en, pd_det_en;
+ unsigned int con, interrupt_en = 0, pd_det_en, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 7)
- << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
- (of_thermal_is_trip_valid(tz, 6)
- << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
- (of_thermal_is_trip_valid(tz, 5)
- << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
- (of_thermal_is_trip_valid(tz, 4)
- << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
- } else {
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ } else
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
- }
pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
@@ -819,70 +630,31 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
-static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
-{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
-
- con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
-
- if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
- interrupt_en |=
- interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
- } else {
- con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
- }
- writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
- writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
-}
-
static void exynos7_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tz = data->tzd;
- unsigned int con, interrupt_en;
+ unsigned int con, interrupt_en = 0, i;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
- interrupt_en =
- (of_thermal_is_trip_valid(tz, 7)
- << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
- (of_thermal_is_trip_valid(tz, 6)
- << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
- (of_thermal_is_trip_valid(tz, 5)
- << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
- (of_thermal_is_trip_valid(tz, 4)
- << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
- (of_thermal_is_trip_valid(tz, 3)
- << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
- (of_thermal_is_trip_valid(tz, 2)
- << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
- (of_thermal_is_trip_valid(tz, 1)
- << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
- (of_thermal_is_trip_valid(tz, 0)
- << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+ for (i = 0; i < data->ntrip; i++) {
+ if (!of_thermal_is_trip_valid(tz, i))
+ continue;
+
+ interrupt_en |=
+ (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
+ }
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
@@ -896,6 +668,12 @@ static int exynos_get_temp(void *p, int *temp)
if (!data || !data->tmu_read || !data->enabled)
return -EINVAL;
+ else if (!data->enabled)
+ /*
+ * Called too early, probably
+ * from thermal_zone_of_sensor_register().
+ */
+ return -EAGAIN;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -919,10 +697,8 @@ static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
if (temp) {
temp /= MCELSIUS;
- if (data->soc != SOC_ARCH_EXYNOS5440) {
- val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
- val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
- }
+ val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+ val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
if (data->soc == SOC_ARCH_EXYNOS7) {
val &= ~(EXYNOS7_EMUL_DATA_MASK <<
EXYNOS7_EMUL_DATA_SHIFT);
@@ -963,16 +739,6 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
writel(val, data->base + emul_con);
}
-static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
- int temp)
-{
- unsigned int val;
-
- val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
- val = get_emul_con_reg(data, val, temp);
- writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
-}
-
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{
struct exynos_tmu_data *data = drv_data;
@@ -995,7 +761,6 @@ out:
}
#else
#define exynos4412_tmu_set_emulation NULL
-#define exynos5440_tmu_set_emulation NULL
static int exynos_tmu_set_emulation(void *drv_data, int temp)
{ return -EINVAL; }
#endif /* CONFIG_THERMAL_EMULATION */
@@ -1013,11 +778,6 @@ static int exynos4412_tmu_read(struct exynos_tmu_data *data)
return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
}
-static int exynos5440_tmu_read(struct exynos_tmu_data *data)
-{
- return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
-}
-
static int exynos7_tmu_read(struct exynos_tmu_data *data)
{
return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
@@ -1028,20 +788,14 @@ static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
- unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
- /* Find which sensor generated this interrupt */
- if (data->soc == SOC_ARCH_EXYNOS5440) {
- val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
- if (!((val_type >> data->id) & 0x1))
- goto out;
- }
if (!IS_ERR(data->clk_sec))
clk_disable(data->clk_sec);
- exynos_report_trigger(data);
+ thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
+
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -1050,7 +804,6 @@ static void exynos_tmu_work(struct work_struct *work)
clk_disable(data->clk);
mutex_unlock(&data->lock);
-out:
enable_irq(data->irq);
}
@@ -1085,15 +838,6 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
writel(val_irq, data->base + tmu_intclear);
}
-static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
-{
- unsigned int val_irq;
-
- val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
- /* clear the interrupts */
- writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
-}
-
static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
struct exynos_tmu_data *data = id;
@@ -1105,86 +849,41 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
}
static const struct of_device_id exynos_tmu_match[] = {
- { .compatible = "samsung,exynos3250-tmu", },
- { .compatible = "samsung,exynos4210-tmu", },
- { .compatible = "samsung,exynos4412-tmu", },
- { .compatible = "samsung,exynos5250-tmu", },
- { .compatible = "samsung,exynos5260-tmu", },
- { .compatible = "samsung,exynos5420-tmu", },
- { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
- { .compatible = "samsung,exynos5433-tmu", },
- { .compatible = "samsung,exynos5440-tmu", },
- { .compatible = "samsung,exynos7-tmu", },
- { /* sentinel */ },
+ {
+ .compatible = "samsung,exynos3250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS3250,
+ }, {
+ .compatible = "samsung,exynos4210-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos4412-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS4412,
+ }, {
+ .compatible = "samsung,exynos5250-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5250,
+ }, {
+ .compatible = "samsung,exynos5260-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5260,
+ }, {
+ .compatible = "samsung,exynos5420-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5420,
+ }, {
+ .compatible = "samsung,exynos5420-tmu-ext-triminfo",
+ .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO,
+ }, {
+ .compatible = "samsung,exynos5433-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS5433,
+ }, {
+ .compatible = "samsung,exynos7-tmu",
+ .data = (const void *)SOC_ARCH_EXYNOS7,
+ },
+ { },
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
-static int exynos_of_get_soc_type(struct device_node *np)
-{
- if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
- return SOC_ARCH_EXYNOS3250;
- else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
- return SOC_ARCH_EXYNOS4210;
- else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
- return SOC_ARCH_EXYNOS4412;
- else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
- return SOC_ARCH_EXYNOS5250;
- else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
- return SOC_ARCH_EXYNOS5260;
- else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
- return SOC_ARCH_EXYNOS5420;
- else if (of_device_is_compatible(np,
- "samsung,exynos5420-tmu-ext-triminfo"))
- return SOC_ARCH_EXYNOS5420_TRIMINFO;
- else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
- return SOC_ARCH_EXYNOS5433;
- else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
- return SOC_ARCH_EXYNOS5440;
- else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
- return SOC_ARCH_EXYNOS7;
-
- return -EINVAL;
-}
-
-static int exynos_of_sensor_conf(struct device_node *np,
- struct exynos_tmu_platform_data *pdata)
-{
- u32 value;
- int ret;
-
- of_node_get(np);
-
- ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
- pdata->gain = (u8)value;
- of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
- pdata->reference_voltage = (u8)value;
- of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
- pdata->noise_cancel_mode = (u8)value;
-
- of_property_read_u32(np, "samsung,tmu_efuse_value",
- &pdata->efuse_value);
- of_property_read_u32(np, "samsung,tmu_min_efuse_value",
- &pdata->min_efuse_value);
- of_property_read_u32(np, "samsung,tmu_max_efuse_value",
- &pdata->max_efuse_value);
-
- of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
- pdata->first_point_trim = (u8)value;
- of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
- pdata->second_point_trim = (u8)value;
- of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
- pdata->default_temp_offset = (u8)value;
-
- of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
-
- of_node_put(np);
- return 0;
-}
-
static int exynos_map_dt_data(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct exynos_tmu_platform_data *pdata;
struct resource res;
if (!data || !pdev->dev.of_node)
@@ -1211,23 +910,22 @@ static int exynos_map_dt_data(struct platform_device *pdev)
return -EADDRNOTAVAIL;
}
- pdata = devm_kzalloc(&pdev->dev,
- sizeof(struct exynos_tmu_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- exynos_of_sensor_conf(pdev->dev.of_node, pdata);
- data->pdata = pdata;
- data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
+ data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev);
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
+ data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4210_tmu_read;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 4;
+ data->gain = 15;
+ data->reference_voltage = 7;
+ data->efuse_value = 55;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 100;
break;
case SOC_ARCH_EXYNOS3250:
case SOC_ARCH_EXYNOS4412:
@@ -1235,48 +933,69 @@ static int exynos_map_dt_data(struct platform_device *pdev)
case SOC_ARCH_EXYNOS5260:
case SOC_ARCH_EXYNOS5420:
case SOC_ARCH_EXYNOS5420_TRIMINFO:
+ data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 4;
+ data->gain = 8;
+ data->reference_voltage = 16;
+ data->efuse_value = 55;
+ if (data->soc != SOC_ARCH_EXYNOS5420 &&
+ data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
+ data->min_efuse_value = 40;
+ else
+ data->min_efuse_value = 0;
+ data->max_efuse_value = 100;
break;
case SOC_ARCH_EXYNOS5433:
+ data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
data->tmu_initialize = exynos5433_tmu_initialize;
data->tmu_control = exynos5433_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 8;
- break;
- case SOC_ARCH_EXYNOS5440:
- data->tmu_initialize = exynos5440_tmu_initialize;
- data->tmu_control = exynos5440_tmu_control;
- data->tmu_read = exynos5440_tmu_read;
- data->tmu_set_emulation = exynos5440_tmu_set_emulation;
- data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
- data->ntrip = 4;
+ data->gain = 8;
+ if (res.start == EXYNOS5433_G3D_BASE)
+ data->reference_voltage = 23;
+ else
+ data->reference_voltage = 16;
+ data->efuse_value = 75;
+ data->min_efuse_value = 40;
+ data->max_efuse_value = 150;
break;
case SOC_ARCH_EXYNOS7:
+ data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
+ data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
data->tmu_initialize = exynos7_tmu_initialize;
data->tmu_control = exynos7_tmu_control;
data->tmu_read = exynos7_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
data->ntrip = 8;
+ data->gain = 9;
+ data->reference_voltage = 17;
+ data->efuse_value = 75;
+ data->min_efuse_value = 15;
+ data->max_efuse_value = 100;
break;
default:
dev_err(&pdev->dev, "Platform not supported\n");
return -EINVAL;
}
+ data->cal_type = TYPE_ONE_POINT_TRIMMING;
+
/*
* Check if the TMU shares some registers and then try to map the
* memory of common registers.
*/
- if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
- data->soc != SOC_ARCH_EXYNOS5440)
+ if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO)
return 0;
if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
deleted file mode 100644
index 5149c2a3030c..000000000000
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit)
- *
- * Copyright (C) 2011 Samsung Electronics
- * Donggeun Kim <dg77.kim@samsung.com>
- * Amit Daniel Kachhap <amit.daniel@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _EXYNOS_TMU_H
-#define _EXYNOS_TMU_H
-#include <linux/cpu_cooling.h>
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-enum soc_type {
- SOC_ARCH_EXYNOS3250 = 1,
- SOC_ARCH_EXYNOS4210,
- SOC_ARCH_EXYNOS4412,
- SOC_ARCH_EXYNOS5250,
- SOC_ARCH_EXYNOS5260,
- SOC_ARCH_EXYNOS5420,
- SOC_ARCH_EXYNOS5420_TRIMINFO,
- SOC_ARCH_EXYNOS5433,
- SOC_ARCH_EXYNOS5440,
- SOC_ARCH_EXYNOS7,
-};
-
-/**
- * struct exynos_tmu_platform_data
- * @gain: gain of amplifier in the positive-TC generator block
- * 0 < gain <= 15
- * @reference_voltage: reference voltage of amplifier
- * in the positive-TC generator block
- * 0 < reference_voltage <= 31
- * @noise_cancel_mode: noise cancellation mode
- * 000, 100, 101, 110 and 111 can be different modes
- * @type: determines the type of SOC
- * @efuse_value: platform defined fuse value
- * @min_efuse_value: minimum valid trimming data
- * @max_efuse_value: maximum valid trimming data
- * @default_temp_offset: default temperature offset in case of no trimming
- * @cal_type: calibration type for temperature
- *
- * This structure is required for configuration of exynos_tmu driver.
- */
-struct exynos_tmu_platform_data {
- u8 gain;
- u8 reference_voltage;
- u8 noise_cancel_mode;
-
- u32 efuse_value;
- u32 min_efuse_value;
- u32 max_efuse_value;
- u8 first_point_trim;
- u8 second_point_trim;
- u8 default_temp_offset;
-
- enum soc_type type;
- u32 cal_type;
-};
-
-#endif /* _EXYNOS_TMU_H */
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 455b58ce2652..207a79838643 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -241,31 +241,6 @@ struct tegra_soctherm {
};
/**
- * clk_writel() - writes a value to a CAR register
- * @ts: pointer to a struct tegra_soctherm
- * @v: the value to write
- * @reg: the register offset
- *
- * Writes @v to @reg. No return value.
- */
-static inline void clk_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
-{
- writel(value, (ts->clk_regs + reg));
-}
-
-/**
- * clk_readl() - reads specified register from CAR IP block
- * @ts: pointer to a struct tegra_soctherm
- * @reg: register address to be read
- *
- * Return: the value of the register
- */
-static inline u32 clk_readl(struct tegra_soctherm *ts, u32 reg)
-{
- return readl(ts->clk_regs + reg);
-}
-
-/**
* ccroc_writel() - writes a value to a CCROC register
* @ts: pointer to a struct tegra_soctherm
* @v: the value to write
@@ -926,7 +901,7 @@ static int throt_set_cdev_state(struct thermal_cooling_device *cdev,
return 0;
}
-static struct thermal_cooling_device_ops throt_cooling_ops = {
+static const struct thermal_cooling_device_ops throt_cooling_ops = {
.get_max_state = throt_get_cdev_max_state,
.get_cur_state = throt_get_cdev_cur_state,
.set_cur_state = throt_set_cdev_state,
@@ -1207,9 +1182,9 @@ static void tegra_soctherm_throttle(struct device *dev)
} else {
writel(v, ts->regs + THROT_GLOBAL_CFG);
- v = clk_readl(ts, CAR_SUPER_CCLKG_DIVIDER);
+ v = readl(ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
- clk_writel(ts, v, CAR_SUPER_CCLKG_DIVIDER);
+ writel(v, ts->clk_regs + CAR_SUPER_CCLKG_DIVIDER);
}
/* initialize stats collection */
diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
index cd9a304fb571..6ac037098b52 100644
--- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
@@ -310,7 +310,7 @@ omap5430_adc_to_temp[
119800, 120200, 120600, 121000, 121400, 121800, 122400, 122600, 123000,
123400,
/* Index 940 - 945 */
- 123800, 1242000, 124600, 124900, 125000, 125000,
+ 123800, 124200, 124600, 124900, 125000, 125000,
};
/* OMAP54xx ES2.0 data */
diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
index 95704732f760..55477d74d591 100644
--- a/drivers/thermal/uniphier_thermal.c
+++ b/drivers/thermal/uniphier_thermal.c
@@ -365,6 +365,10 @@ static const struct of_device_id uniphier_tm_dt_ids[] = {
.compatible = "socionext,uniphier-ld20-thermal",
.data = &uniphier_ld20_tm_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-thermal",
+ .data = &uniphier_ld20_tm_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids);