diff options
42 files changed, 795 insertions, 267 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt index e9de3756752b..c9a6587fe4bb 100644 --- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt @@ -1,7 +1,9 @@ Broadcom BCM2835 I2C controller Required properties: -- compatible : Should be "brcm,bcm2835-i2c". +- compatible : Should be one of: + "brcm,bcm2711-i2c" + "brcm,bcm2835-i2c" - reg: Should contain register location and length. - interrupts: Should contain interrupt. - clocks : The clock feeding the I2C controller. diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt index 3ee5e8f6ee01..3ee5e8f6ee01 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-emev2.txt b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt index 5ed1ea1c7e14..5ed1ea1c7e14 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-emev2.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt index 202602e6e837..202602e6e837 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/renesas,riic.txt index e26fe3ad86a9..e26fe3ad86a9 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-riic.txt +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.txt diff --git a/MAINTAINERS b/MAINTAINERS index 54f1286087e9..a8d193a74692 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7865,6 +7865,12 @@ S: Maintained F: drivers/mfd/lpc_ich.c F: drivers/gpio/gpio-ich.c +ICY I2C DRIVER +M: Max Staudt <max@enpas.org> +L: linux-i2c@vger.kernel.org +S: Maintained +F: drivers/i2c/busses/i2c-icy.c + IDE SUBSYSTEM M: "David S. Miller" <davem@davemloft.net> L: linux-ide@vger.kernel.org @@ -13791,7 +13797,7 @@ F: drivers/clk/renesas/ RENESAS EMEV2 I2C DRIVER M: Wolfram Sang <wsa+renesas@sang-engineering.com> S: Supported -F: Documentation/devicetree/bindings/i2c/i2c-emev2.txt +F: Documentation/devicetree/bindings/i2c/renesas,iic-emev2.txt F: drivers/i2c/busses/i2c-emev2.c RENESAS ETHERNET DRIVERS @@ -13813,15 +13819,15 @@ F: drivers/iio/adc/rcar-gyroadc.c RENESAS R-CAR I2C DRIVERS M: Wolfram Sang <wsa+renesas@sang-engineering.com> S: Supported -F: Documentation/devicetree/bindings/i2c/i2c-rcar.txt -F: Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +F: Documentation/devicetree/bindings/i2c/renesas,i2c.txt +F: Documentation/devicetree/bindings/i2c/renesas,iic.txt F: drivers/i2c/busses/i2c-rcar.c F: drivers/i2c/busses/i2c-sh_mobile.c RENESAS RIIC DRIVER M: Chris Brandt <chris.brandt@renesas.com> S: Supported -F: Documentation/devicetree/bindings/i2c/i2c-riic.txt +F: Documentation/devicetree/bindings/i2c/renesas,riic.txt F: drivers/i2c/busses/i2c-riic.c RENESAS USB PHY DRIVER diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 7cd0c9ac71ea..71511ae2dfcd 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -160,11 +160,17 @@ static const struct apd_device_desc hip08_i2c_desc = { .setup = acpi_apd_setup, .fixed_clk_rate = 250000000, }; + static const struct apd_device_desc thunderx2_i2c_desc = { .setup = acpi_apd_setup, .fixed_clk_rate = 125000000, }; +static const struct apd_device_desc nxp_i2c_desc = { + .setup = acpi_apd_setup, + .fixed_clk_rate = 350000000, +}; + static const struct apd_device_desc hip08_spi_desc = { .setup = acpi_apd_setup, .fixed_clk_rate = 250000000, @@ -238,6 +244,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = { { "HISI02A1", APD_ADDR(hip07_i2c_desc) }, { "HISI02A2", APD_ADDR(hip08_i2c_desc) }, { "HISI0173", APD_ADDR(hip08_spi_desc) }, + { "NXP0001", APD_ADDR(nxp_i2c_desc) }, #endif { } }; diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 98bccace8c1c..3d61c4fb4dec 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -978,10 +978,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv) { int ret; - adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec", + adv->i2c_cec = i2c_new_ancillary_device(adv->i2c_main, "cec", ADV7511_CEC_I2C_ADDR_DEFAULT); - if (!adv->i2c_cec) - return -EINVAL; + if (IS_ERR(adv->i2c_cec)) + return PTR_ERR(adv->i2c_cec); i2c_set_clientdata(adv->i2c_cec, adv); adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec, @@ -1162,20 +1162,20 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) adv7511_packet_disable(adv7511, 0xffff); - adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid", + adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid", ADV7511_EDID_I2C_ADDR_DEFAULT); - if (!adv7511->i2c_edid) { - ret = -EINVAL; + if (IS_ERR(adv7511->i2c_edid)) { + ret = PTR_ERR(adv7511->i2c_edid); goto uninit_regulators; } regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, adv7511->i2c_edid->addr << 1); - adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet", + adv7511->i2c_packet = i2c_new_ancillary_device(i2c, "packet", ADV7511_PACKET_I2C_ADDR_DEFAULT); - if (!adv7511->i2c_packet) { - ret = -EINVAL; + if (IS_ERR(adv7511->i2c_packet)) { + ret = PTR_ERR(adv7511->i2c_packet); goto err_i2c_unregister_edid; } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5587215b8ddb..146ce40d8e0a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -429,6 +429,7 @@ config I2C_AXXIA tristate "Axxia I2C controller" depends on ARCH_AXXIA || COMPILE_TEST default ARCH_AXXIA + select I2C_SLAVE help Say yes if you want to support the I2C bus on Axxia platforms. @@ -977,7 +978,7 @@ config I2C_SIRF will be called i2c-sirf. config I2C_SPRD - bool "Spreadtrum I2C interface" + tristate "Spreadtrum I2C interface" depends on I2C=y && ARCH_SPRD help If you say yes to this option, support will be included for the @@ -1309,6 +1310,20 @@ config I2C_ELEKTOR This support is also available as a module. If so, the module will be called i2c-elektor. +config I2C_ICY + tristate "ICY Zorro card" + depends on ZORRO + select I2C_ALGOPCF + help + This supports the PCF8584 Zorro bus I2C adapter, known as ICY. + Say Y if you own such an adapter. + + This support is also available as a module. If so, the module + will be called i2c-icy. + + If you have a 2019 edition board with an LTC2990 sensor at address + 0x4c, loading the module 'ltc2990' is sufficient to enable it. + config I2C_MLXCPLD tristate "Mellanox I2C driver" depends on X86_64 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 80c23895eaaf..3ab8aebc39c9 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -140,6 +140,7 @@ obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o +obj-$(CONFIG_I2C_ICY) += i2c-icy.o obj-$(CONFIG_I2C_MLXCPLD) += i2c-mlxcpld.o obj-$(CONFIG_I2C_OPAL) += i2c-opal.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index ff3142b15cab..0214daa913ff 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -77,6 +77,40 @@ MST_STATUS_IP) #define MST_TX_BYTES_XFRD 0x50 #define MST_RX_BYTES_XFRD 0x54 +#define SLV_ADDR_DEC_CTL 0x58 +#define SLV_ADDR_DEC_GCE BIT(0) /* ACK to General Call Address from own master (loopback) */ +#define SLV_ADDR_DEC_OGCE BIT(1) /* ACK to General Call Address from external masters */ +#define SLV_ADDR_DEC_SA1E BIT(2) /* ACK to addr_1 enabled */ +#define SLV_ADDR_DEC_SA1M BIT(3) /* 10-bit addressing for addr_1 enabled */ +#define SLV_ADDR_DEC_SA2E BIT(4) /* ACK to addr_2 enabled */ +#define SLV_ADDR_DEC_SA2M BIT(5) /* 10-bit addressing for addr_2 enabled */ +#define SLV_ADDR_1 0x5c +#define SLV_ADDR_2 0x60 +#define SLV_RX_CTL 0x64 +#define SLV_RX_ACSA1 BIT(0) /* Generate ACK for writes to addr_1 */ +#define SLV_RX_ACSA2 BIT(1) /* Generate ACK for writes to addr_2 */ +#define SLV_RX_ACGCA BIT(2) /* ACK data phase transfers to General Call Address */ +#define SLV_DATA 0x68 +#define SLV_RX_FIFO 0x6c +#define SLV_FIFO_DV1 BIT(0) /* Data Valid for addr_1 */ +#define SLV_FIFO_DV2 BIT(1) /* Data Valid for addr_2 */ +#define SLV_FIFO_AS BIT(2) /* (N)ACK Sent */ +#define SLV_FIFO_TNAK BIT(3) /* Timeout NACK */ +#define SLV_FIFO_STRC BIT(4) /* First byte after start condition received */ +#define SLV_FIFO_RSC BIT(5) /* Repeated Start Condition */ +#define SLV_FIFO_STPC BIT(6) /* Stop Condition */ +#define SLV_FIFO_DV (SLV_FIFO_DV1 | SLV_FIFO_DV2) +#define SLV_INT_ENABLE 0x70 +#define SLV_INT_STATUS 0x74 +#define SLV_STATUS_RFH BIT(0) /* FIFO service */ +#define SLV_STATUS_WTC BIT(1) /* Write transfer complete */ +#define SLV_STATUS_SRS1 BIT(2) /* Slave read from addr 1 */ +#define SLV_STATUS_SRRS1 BIT(3) /* Repeated start from addr 1 */ +#define SLV_STATUS_SRND1 BIT(4) /* Read request not following start condition */ +#define SLV_STATUS_SRC1 BIT(5) /* Read canceled */ +#define SLV_STATUS_SRAT1 BIT(6) /* Slave Read timed out */ +#define SLV_STATUS_SRDRE1 BIT(7) /* Data written after timed out */ +#define SLV_READ_DUMMY 0x78 #define SCL_HIGH_PERIOD 0x80 #define SCL_LOW_PERIOD 0x84 #define SPIKE_FLTR_LEN 0x88 @@ -111,6 +145,8 @@ struct axxia_i2c_dev { struct clk *i2c_clk; u32 bus_clk_rate; bool last; + struct i2c_client *slave; + int irq; }; static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask) @@ -276,13 +312,65 @@ static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev) return ret; } +static void axxia_i2c_slv_fifo_event(struct axxia_i2c_dev *idev) +{ + u32 fifo_status = readl(idev->base + SLV_RX_FIFO); + u8 val; + + dev_dbg(idev->dev, "slave irq fifo_status=0x%x\n", fifo_status); + + if (fifo_status & SLV_FIFO_DV1) { + if (fifo_status & SLV_FIFO_STRC) + i2c_slave_event(idev->slave, + I2C_SLAVE_WRITE_REQUESTED, &val); + + val = readl(idev->base + SLV_DATA); + i2c_slave_event(idev->slave, I2C_SLAVE_WRITE_RECEIVED, &val); + } + if (fifo_status & SLV_FIFO_STPC) { + readl(idev->base + SLV_DATA); /* dummy read */ + i2c_slave_event(idev->slave, I2C_SLAVE_STOP, &val); + } + if (fifo_status & SLV_FIFO_RSC) + readl(idev->base + SLV_DATA); /* dummy read */ +} + +static irqreturn_t axxia_i2c_slv_isr(struct axxia_i2c_dev *idev) +{ + u32 status = readl(idev->base + SLV_INT_STATUS); + u8 val; + + dev_dbg(idev->dev, "slave irq status=0x%x\n", status); + + if (status & SLV_STATUS_RFH) + axxia_i2c_slv_fifo_event(idev); + if (status & SLV_STATUS_SRS1) { + i2c_slave_event(idev->slave, I2C_SLAVE_READ_REQUESTED, &val); + writel(val, idev->base + SLV_DATA); + } + if (status & SLV_STATUS_SRND1) { + i2c_slave_event(idev->slave, I2C_SLAVE_READ_PROCESSED, &val); + writel(val, idev->base + SLV_DATA); + } + if (status & SLV_STATUS_SRC1) + i2c_slave_event(idev->slave, I2C_SLAVE_STOP, &val); + + writel(INT_SLV, idev->base + INTERRUPT_STATUS); + return IRQ_HANDLED; +} + static irqreturn_t axxia_i2c_isr(int irq, void *_dev) { struct axxia_i2c_dev *idev = _dev; + irqreturn_t ret = IRQ_NONE; u32 status; - if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST)) - return IRQ_NONE; + status = readl(idev->base + INTERRUPT_STATUS); + + if (status & INT_SLV) + ret = axxia_i2c_slv_isr(idev); + if (!(status & INT_MST)) + return ret; /* Read interrupt status bits */ status = readl(idev->base + MST_INT_STATUS); @@ -583,9 +671,58 @@ static u32 axxia_i2c_func(struct i2c_adapter *adap) return caps; } +static int axxia_i2c_reg_slave(struct i2c_client *slave) +{ + struct axxia_i2c_dev *idev = i2c_get_adapdata(slave->adapter); + u32 slv_int_mask = SLV_STATUS_RFH; + u32 dec_ctl; + + if (idev->slave) + return -EBUSY; + + idev->slave = slave; + + /* Enable slave mode as well */ + writel(GLOBAL_MST_EN | GLOBAL_SLV_EN, idev->base + GLOBAL_CONTROL); + writel(INT_MST | INT_SLV, idev->base + INTERRUPT_ENABLE); + + /* Set slave address */ + dec_ctl = SLV_ADDR_DEC_SA1E; + if (slave->flags & I2C_CLIENT_TEN) + dec_ctl |= SLV_ADDR_DEC_SA1M; + + writel(SLV_RX_ACSA1, idev->base + SLV_RX_CTL); + writel(dec_ctl, idev->base + SLV_ADDR_DEC_CTL); + writel(slave->addr, idev->base + SLV_ADDR_1); + + /* Enable interrupts */ + slv_int_mask |= SLV_STATUS_SRS1 | SLV_STATUS_SRRS1 | SLV_STATUS_SRND1; + slv_int_mask |= SLV_STATUS_SRC1; + writel(slv_int_mask, idev->base + SLV_INT_ENABLE); + + return 0; +} + +static int axxia_i2c_unreg_slave(struct i2c_client *slave) +{ + struct axxia_i2c_dev *idev = i2c_get_adapdata(slave->adapter); + + /* Disable slave mode */ + writel(GLOBAL_MST_EN, idev->base + GLOBAL_CONTROL); + writel(INT_MST, idev->base + INTERRUPT_ENABLE); + + synchronize_irq(idev->irq); + + idev->slave = NULL; + + return 0; +} + static const struct i2c_algorithm axxia_i2c_algo = { .master_xfer = axxia_i2c_xfer, .functionality = axxia_i2c_func, + .reg_slave = axxia_i2c_reg_slave, + .unreg_slave = axxia_i2c_unreg_slave, }; static const struct i2c_adapter_quirks axxia_i2c_quirks = { @@ -599,7 +736,6 @@ static int axxia_i2c_probe(struct platform_device *pdev) struct axxia_i2c_dev *idev = NULL; struct resource *res; void __iomem *base; - int irq; int ret = 0; idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); @@ -611,10 +747,10 @@ static int axxia_i2c_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - irq = platform_get_irq(pdev, 0); - if (irq < 0) { + idev->irq = platform_get_irq(pdev, 0); + if (idev->irq < 0) { dev_err(&pdev->dev, "missing interrupt resource\n"); - return irq; + return idev->irq; } idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c"); @@ -643,10 +779,10 @@ static int axxia_i2c_probe(struct platform_device *pdev) goto error_disable_clk; } - ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0, + ret = devm_request_irq(&pdev->dev, idev->irq, axxia_i2c_isr, 0, pdev->name, idev); if (ret) { - dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq); + dev_err(&pdev->dev, "failed to claim IRQ%d\n", idev->irq); goto error_disable_clk; } diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 19ef2b0c682a..9ffdffaf6141 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -808,7 +808,7 @@ static struct i2c_algorithm bcm_iproc_algo = { .unreg_slave = bcm_iproc_i2c_unreg_slave, }; -static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { +static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = { .max_read_len = M_RX_MAX_READ_LEN, }; @@ -922,7 +922,9 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev) adap = &iproc_i2c->adapter; i2c_set_adapdata(adap, iproc_i2c); - strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name)); + snprintf(adap->name, sizeof(adap->name), + "Broadcom iProc (%s)", + of_node_full_name(iproc_i2c->device->of_node)); adap->algo = &bcm_iproc_algo; adap->quirks = &bcm_iproc_i2c_quirks; adap->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 67752f7b0371..e01b2b57e724 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -12,6 +12,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -389,7 +390,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = { }; /* - * This HW was reported to have problems with clock stretching: + * The BCM2835 was reported to have problems with clock stretching: * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html * https://www.raspberrypi.org/forums/viewtopic.php?p=146272 */ @@ -471,11 +472,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, i2c_dev); adap->owner = THIS_MODULE; adap->class = I2C_CLASS_DEPRECATED; - strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name)); + snprintf(adap->name, sizeof(adap->name), "bcm2835 (%s)", + of_node_full_name(pdev->dev.of_node)); adap->algo = &bcm2835_i2c_algo; adap->dev.parent = &pdev->dev; adap->dev.of_node = pdev->dev.of_node; - adap->quirks = &bcm2835_i2c_quirks; + adap->quirks = of_device_get_match_data(&pdev->dev); bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0); @@ -501,7 +503,8 @@ static int bcm2835_i2c_remove(struct platform_device *pdev) } static const struct of_device_id bcm2835_i2c_of_match[] = { - { .compatible = "brcm,bcm2835-i2c" }, + { .compatible = "brcm,bcm2711-i2c" }, + { .compatible = "brcm,bcm2835-i2c", .data = &bcm2835_i2c_quirks }, {}, }; MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match); diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 66af44bfa67d..b8fde61bb5d8 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -178,6 +178,51 @@ static const struct i2c_algorithm cht_wc_i2c_adap_algo = { .smbus_xfer = cht_wc_i2c_adap_smbus_xfer, }; +/* + * We are an i2c-adapter which itself is part of an i2c-client. This means that + * transfers done through us take adapter->bus_lock twice, once for our parent + * i2c-adapter and once to take our own bus_lock. Lockdep does not like this + * nested locking, to make lockdep happy in the case of busses with muxes, the + * i2c-core's i2c_adapter_lock_bus function calls: + * rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); + * + * But i2c_adapter_depth only works when the direct parent of the adapter is + * another adapter, as it is only meant for muxes. In our case there is an + * i2c-client and MFD instantiated platform_device in the parent->child chain + * between the 2 devices. + * + * So we override the default i2c_lock_operations and pass a hardcoded + * depth of 1 to rt_mutex_lock_nested, to make lockdep happy. + * + * Note that if there were to be a mux attached to our adapter, this would + * break things again since the i2c-mux code expects the root-adapter to have + * a locking depth of 0. But we always have only 1 client directly attached + * in the form of the Charger IC paired with the CHT Whiskey Cove PMIC. + */ +static void cht_wc_i2c_adap_lock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + rt_mutex_lock_nested(&adapter->bus_lock, 1); +} + +static int cht_wc_i2c_adap_trylock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + return rt_mutex_trylock(&adapter->bus_lock); +} + +static void cht_wc_i2c_adap_unlock_bus(struct i2c_adapter *adapter, + unsigned int flags) +{ + rt_mutex_unlock(&adapter->bus_lock); +} + +static const struct i2c_lock_operations cht_wc_i2c_adap_lock_ops = { + .lock_bus = cht_wc_i2c_adap_lock_bus, + .trylock_bus = cht_wc_i2c_adap_trylock_bus, + .unlock_bus = cht_wc_i2c_adap_unlock_bus, +}; + /**** irqchip for the client connected to the extchgr i2c adapter ****/ static void cht_wc_i2c_irq_lock(struct irq_data *data) { @@ -286,6 +331,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) adap->adapter.owner = THIS_MODULE; adap->adapter.class = I2C_CLASS_HWMON; adap->adapter.algo = &cht_wc_i2c_adap_algo; + adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops; strlcpy(adap->adapter.name, "PMIC I2C Adapter", sizeof(adap->adapter.name)); adap->adapter.dev.parent = &pdev->dev; @@ -363,8 +409,7 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) { struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); - if (adap->client) - i2c_unregister_device(adap->client); + i2c_unregister_device(adap->client); i2c_del_adapter(&adap->adapter); irq_domain_remove(adap->irq_domain); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index d464799e40a3..e8b328242256 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -655,15 +655,11 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) struct i2c_bus_recovery_info *rinfo = &dev->rinfo; struct i2c_adapter *adap = &dev->adapter; struct gpio_desc *gpio; - int r; - - gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH); - if (IS_ERR(gpio)) { - r = PTR_ERR(gpio); - if (r == -ENOENT || r == -ENOSYS) - return 0; - return r; - } + + gpio = devm_gpiod_get_optional(dev->dev, "scl", GPIOD_OUT_HIGH); + if (IS_ERR_OR_NULL(gpio)) + return PTR_ERR_OR_ZERO(gpio); + rinfo->scl_gpiod = gpio; gpio = devm_gpiod_get_optional(dev->dev, "sda", GPIOD_IN); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 76810deb2de6..050adda7c1bd 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -33,6 +33,7 @@ enum dw_pci_ctl_id_t { baytrail, cherrytrail, haswell, + elkhartlake, }; struct dw_scl_sda_cfg { @@ -168,13 +169,20 @@ static struct dw_pci_controller dw_pci_controllers[] = { .flags = MODEL_CHERRYTRAIL, .scl_sda_cfg = &byt_config, }, + [elkhartlake] = { + .bus_num = -1, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .functionality = I2C_FUNC_10BIT_ADDR, + .clk_khz = 100000, + }, }; #ifdef CONFIG_PM static int i2c_dw_pci_suspend(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); - struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); i_dev->suspended = true; i_dev->disable(i_dev); @@ -184,8 +192,7 @@ static int i2c_dw_pci_suspend(struct device *dev) static int i2c_dw_pci_resume(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); - struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev); + struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); int ret; ret = i_dev->init(i_dev); @@ -227,6 +234,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, return r; } + pci_set_master(pdev); + r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); if (r) { dev_err(&pdev->dev, "I/O memory remapping failed\n"); @@ -237,18 +246,24 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, if (!dev) return -ENOMEM; + r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (r < 0) + return r; + dev->clk = NULL; dev->controller = controller; dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; dev->base = pcim_iomap_table(pdev)[0]; dev->dev = &pdev->dev; - dev->irq = pdev->irq; + dev->irq = pci_irq_vector(pdev, 0); dev->flags |= controller->flags; if (controller->setup) { r = controller->setup(pdev, controller); - if (r) + if (r) { + pci_free_irq_vectors(pdev); return r; + } } dev->functionality = controller->functionality | @@ -276,8 +291,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, adap->nr = controller->bus_num; r = i2c_dw_probe(dev); - if (r) + if (r) { + pci_free_irq_vectors(pdev); return r; + } pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); pm_runtime_use_autosuspend(&pdev->dev); @@ -296,6 +313,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) pm_runtime_get_noresume(&pdev->dev); i2c_del_adapter(&dev->adapter); + pci_free_irq_vectors(pdev); } /* work with hotplug and coldplug */ @@ -331,6 +349,15 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x22C5), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C6), cherrytrail }, { PCI_VDEVICE(INTEL, 0x22C7), cherrytrail }, + /* Elkhart Lake (PSE I2C) */ + { PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bba), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake }, + { PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index ddfb81872906..16dd338877d0 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -279,12 +279,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); - if (IS_ERR(dev->rst)) { - if (PTR_ERR(dev->rst) == -EPROBE_DEFER) - return -EPROBE_DEFER; - } else { - reset_control_deassert(dev->rst); - } + if (IS_ERR(dev->rst)) + return PTR_ERR(dev->rst); + + reset_control_deassert(dev->rst); t = &dev->timings; if (pdata) @@ -346,8 +344,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) /* Optional interface clock */ dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); - if (IS_ERR(dev->pclk)) - return PTR_ERR(dev->pclk); + if (IS_ERR(dev->pclk)) { + ret = PTR_ERR(dev->pclk); + goto exit_reset; + } dev->clk = devm_clk_get(&pdev->dev, NULL); if (!i2c_dw_prepare_clk(dev, true)) { @@ -400,8 +400,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) exit_probe: dw_i2c_plat_pm_cleanup(dev); exit_reset: - if (!IS_ERR_OR_NULL(dev->rst)) - reset_control_assert(dev->rst); + reset_control_assert(dev->rst); return ret; } @@ -419,8 +418,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); dw_i2c_plat_pm_cleanup(dev); - if (!IS_ERR_OR_NULL(dev->rst)) - reset_control_assert(dev->rst); + reset_control_assert(dev->rst); return 0; } diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index e4e7932f7800..e7514c16b756 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -791,9 +791,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev) } ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq, - IRQF_NO_SUSPEND | IRQF_ONESHOT, - dev_name(&pdev->dev), i2c); - + IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c); if (ret != 0) { dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq); goto err_clk; diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index da5eb3960def..e0c256922d4f 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -707,8 +707,10 @@ static int fsi_i2c_probe(struct device *dev) continue; port = kzalloc(sizeof(*port), GFP_KERNEL); - if (!port) + if (!port) { + of_node_put(np); break; + } port->master = i2c; port->port = port_no; diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index 4df1434b3597..8497c7a95dd4 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -445,8 +445,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev) hix5hd2_i2c_init(priv); ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq, - IRQF_NO_SUSPEND | IRQF_ONESHOT, - dev_name(&pdev->dev), priv); + IRQF_NO_SUSPEND, dev_name(&pdev->dev), priv); if (ret != 0) { dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq); goto err_clk; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 36e9559f880c..c09791fb4929 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -292,7 +292,8 @@ struct i801_priv { #define FEATURE_HOST_NOTIFY BIT(5) /* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF BIT(15) -#define FEATURE_TCO BIT(16) +#define FEATURE_TCO_SPT BIT(16) +#define FEATURE_TCO_CNL BIT(17) static const char *i801_feature_names[] = { "SMBus PEC", @@ -1500,57 +1501,23 @@ static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) } #endif -static const struct itco_wdt_platform_data tco_platform_data = { +static const struct itco_wdt_platform_data spt_tco_platform_data = { .name = "Intel PCH", .version = 4, }; static DEFINE_SPINLOCK(p2sb_spinlock); -static void i801_add_tco(struct i801_priv *priv) +static struct platform_device * +i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, + struct resource *tco_res) { - struct pci_dev *pci_dev = priv->pci_dev; - struct resource tco_res[3], *res; - struct platform_device *pdev; + struct resource *res; unsigned int devfn; - u32 tco_base, tco_ctl; - u32 base_addr, ctrl_val; u64 base64_addr; + u32 base_addr; u8 hidden; - if (!(priv->features & FEATURE_TCO)) - return; - - pci_read_config_dword(pci_dev, TCOBASE, &tco_base); - pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); - if (!(tco_ctl & TCOCTL_EN)) - return; - - memset(tco_res, 0, sizeof(tco_res)); - - res = &tco_res[ICH_RES_IO_TCO]; - res->start = tco_base & ~1; - res->end = res->start + 32 - 1; - res->flags = IORESOURCE_IO; - - /* - * Power Management registers. - */ - devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2); - pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr); - - res = &tco_res[ICH_RES_IO_SMI]; - res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF; - res->end = res->start + 3; - res->flags = IORESOURCE_IO; - - /* - * Enable the ACPI I/O space. - */ - pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val); - ctrl_val |= ACPICTRL_EN; - pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val); - /* * We must access the NO_REBOOT bit over the Primary to Sideband * bridge (P2SB). The BIOS prevents the P2SB device from being @@ -1586,15 +1553,76 @@ static void i801_add_tco(struct i801_priv *priv) res->end = res->start + 3; res->flags = IORESOURCE_MEM; - pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, - tco_res, 3, &tco_platform_data, - sizeof(tco_platform_data)); - if (IS_ERR(pdev)) { - dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); + return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, + tco_res, 3, &spt_tco_platform_data, + sizeof(spt_tco_platform_data)); +} + +static const struct itco_wdt_platform_data cnl_tco_platform_data = { + .name = "Intel PCH", + .version = 6, +}; + +static struct platform_device * +i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev, + struct resource *tco_res) +{ + return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, + tco_res, 2, &cnl_tco_platform_data, + sizeof(cnl_tco_platform_data)); +} + +static void i801_add_tco(struct i801_priv *priv) +{ + u32 base_addr, tco_base, tco_ctl, ctrl_val; + struct pci_dev *pci_dev = priv->pci_dev; + struct resource tco_res[3], *res; + unsigned int devfn; + + /* If we have ACPI based watchdog use that instead */ + if (acpi_has_watchdog()) return; - } - priv->tco_pdev = pdev; + if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL))) + return; + + pci_read_config_dword(pci_dev, TCOBASE, &tco_base); + pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); + if (!(tco_ctl & TCOCTL_EN)) + return; + + memset(tco_res, 0, sizeof(tco_res)); + + res = &tco_res[ICH_RES_IO_TCO]; + res->start = tco_base & ~1; + res->end = res->start + 32 - 1; + res->flags = IORESOURCE_IO; + + /* + * Power Management registers. + */ + devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2); + pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr); + + res = &tco_res[ICH_RES_IO_SMI]; + res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF; + res->end = res->start + 3; + res->flags = IORESOURCE_IO; + + /* + * Enable the ACPI I/O space. + */ + pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val); + ctrl_val |= ACPICTRL_EN; + pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val); + + if (priv->features & FEATURE_TCO_CNL) + priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res); + else + priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res); + + if (IS_ERR(priv->tco_pdev)) + dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); } #ifdef CONFIG_ACPI @@ -1704,13 +1732,21 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) switch (dev->device) { case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: - case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS: - case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS: case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS: case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS: - case PCI_DEVICE_ID_INTEL_CDF_SMBUS: case PCI_DEVICE_ID_INTEL_DNV_SMBUS: case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS: + priv->features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_IRQ; + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; + priv->features |= FEATURE_TCO_SPT; + priv->features |= FEATURE_HOST_NOTIFY; + break; + + case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS: + case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_CDF_SMBUS: case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS: case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS: case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS: @@ -1720,9 +1756,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->features |= FEATURE_IRQ; priv->features |= FEATURE_SMBUS_PEC; priv->features |= FEATURE_BLOCK_BUFFER; - /* If we have ACPI based watchdog use that instead */ - if (!acpi_has_watchdog()) - priv->features |= FEATURE_TCO; + priv->features |= FEATURE_TCO_CNL; priv->features |= FEATURE_HOST_NOTIFY; break; @@ -1921,8 +1955,7 @@ static int i801_suspend(struct device *dev) static int i801_resume(struct device *dev) { - struct pci_dev *pci_dev = to_pci_dev(dev); - struct i801_priv *priv = pci_get_drvdata(pci_dev); + struct i801_priv *priv = dev_get_drvdata(dev); i801_enable_host_notify(&priv->adapter); diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c new file mode 100644 index 000000000000..8382eb64b424 --- /dev/null +++ b/drivers/i2c/busses/i2c-icy.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * I2C driver for stand-alone PCF8584 style adapters on Zorro cards + * + * Original ICY documentation can be found on Aminet: + * https://aminet.net/package/docs/hard/icy + * + * There has been a modern community re-print of this design in 2019: + * https://www.a1k.org/forum/index.php?threads/70106/ + * + * The card is basically a Philips PCF8584 connected straight to the + * beginning of the AutoConfig'd address space (register S1 on base+2), + * with /INT on /INT2 on the Zorro bus. + * + * Copyright (c) 2019 Max Staudt <max@enpas.org> + * + * This started as a fork of i2c-elektor.c and has evolved since. + * Thanks go to its authors for providing a base to grow on. + * + * + * IRQ support is currently not implemented. + * + * As it turns out, i2c-algo-pcf is really written with i2c-elektor's + * edge-triggered ISA interrupts in mind, while the Amiga's Zorro bus has + * level-triggered interrupts. This means that once an interrupt occurs, we + * have to tell the PCF8584 to shut up immediately, or it will keep the + * interrupt line busy and cause an IRQ storm. + + * However, because of the PCF8584's host-side protocol, there is no good + * way to just quieten it without side effects. Rather, we have to perform + * the next read/write operation straight away, which will reset the /INT + * pin. This entails re-designing the core of i2c-algo-pcf in the future. + * For now, we never request an IRQ from the PCF8584, and poll it instead. + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-pcf.h> + +#include <asm/amigaints.h> +#include <linux/zorro.h> + +#include "../algos/i2c-algo-pcf.h" + +struct icy_i2c { + struct i2c_adapter adapter; + + void __iomem *reg_s0; + void __iomem *reg_s1; + struct fwnode_handle *ltc2990_fwnode; + struct i2c_client *ltc2990_client; +}; + +/* + * Functions called by i2c-algo-pcf + */ +static void icy_pcf_setpcf(void *data, int ctl, int val) +{ + struct icy_i2c *i2c = (struct icy_i2c *)data; + + u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; + + z_writeb(val, address); +} + +static int icy_pcf_getpcf(void *data, int ctl) +{ + struct icy_i2c *i2c = (struct icy_i2c *)data; + + u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0; + + return z_readb(address); +} + +static int icy_pcf_getown(void *data) +{ + return 0x55; +} + +static int icy_pcf_getclock(void *data) +{ + return 0x1c; +} + +static void icy_pcf_waitforpin(void *data) +{ + usleep_range(50, 150); +} + +/* + * Main i2c-icy part + */ +static unsigned short const icy_ltc2990_addresses[] = { + 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END +}; + +/* + * Additional sensors exposed once this property is applied: + * + * in1 will be the voltage of the 5V rail, divided by 2. + * in2 will be the voltage of the 12V rail, divided by 4. + * temp3 will be measured using a PCB loop next the chip. + */ +static const u32 icy_ltc2990_meas_mode[] = {0, 3}; + +static const struct property_entry icy_ltc2990_props[] = { + PROPERTY_ENTRY_U32_ARRAY("lltc,meas-mode", icy_ltc2990_meas_mode), + { } +}; + +static int icy_probe(struct zorro_dev *z, + const struct zorro_device_id *ent) +{ + struct icy_i2c *i2c; + struct i2c_algo_pcf_data *algo_data; + struct fwnode_handle *new_fwnode; + struct i2c_board_info ltc2990_info = { + .type = "ltc2990", + .addr = 0x4c, + }; + + i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + algo_data = devm_kzalloc(&z->dev, sizeof(*algo_data), GFP_KERNEL); + if (!algo_data) + return -ENOMEM; + + dev_set_drvdata(&z->dev, i2c); + i2c->adapter.dev.parent = &z->dev; + i2c->adapter.owner = THIS_MODULE; + /* i2c->adapter.algo assigned by i2c_pcf_add_bus() */ + i2c->adapter.algo_data = algo_data; + strlcpy(i2c->adapter.name, "ICY I2C Zorro adapter", + sizeof(i2c->adapter.name)); + + if (!devm_request_mem_region(&z->dev, + z->resource.start, + 4, i2c->adapter.name)) + return -ENXIO; + + /* Driver private data */ + i2c->reg_s0 = ZTWO_VADDR(z->resource.start); + i2c->reg_s1 = ZTWO_VADDR(z->resource.start + 2); + + algo_data->data = i2c; + algo_data->setpcf = icy_pcf_setpcf; + algo_data->getpcf = icy_pcf_getpcf; + algo_data->getown = icy_pcf_getown; + algo_data->getclock = icy_pcf_getclock; + algo_data->waitforpin = icy_pcf_waitforpin; + + if (i2c_pcf_add_bus(&i2c->adapter)) { + dev_err(&z->dev, "i2c_pcf_add_bus() failed\n"); + return -ENXIO; + } + + dev_info(&z->dev, "ICY I2C controller at %pa, IRQ not implemented\n", + &z->resource.start); + + /* + * The 2019 a1k.org PCBs have an LTC2990 at 0x4c, so start + * it automatically once ltc2990 is modprobed. + * + * in0 is the voltage of the internal 5V power supply. + * temp1 is the temperature inside the chip. + * + * See property_entry above for in1, in2, temp3. + */ + new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL); + if (IS_ERR(new_fwnode)) { + dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n", + PTR_ERR(new_fwnode)); + } else { + /* + * Store the fwnode so we can destroy it on .remove(). + * Only store it on success, as fwnode_remove_software_node() + * is NULL safe, but not PTR_ERR safe. + */ + i2c->ltc2990_fwnode = new_fwnode; + ltc2990_info.fwnode = new_fwnode; + + i2c->ltc2990_client = + i2c_new_probed_device(&i2c->adapter, + <c2990_info, + icy_ltc2990_addresses, + NULL); + } + + return 0; +} + +static void icy_remove(struct zorro_dev *z) +{ + struct icy_i2c *i2c = dev_get_drvdata(&z->dev); + + i2c_unregister_device(i2c->ltc2990_client); + fwnode_remove_software_node(i2c->ltc2990_fwnode); + + i2c_del_adapter(&i2c->adapter); +} + +static const struct zorro_device_id icy_zorro_tbl[] = { + { ZORRO_ID(VMC, 15, 0), }, + { 0 } +}; + +MODULE_DEVICE_TABLE(zorro, icy_zorro_tbl); + +static struct zorro_driver icy_driver = { + .name = "i2c-icy", + .id_table = icy_zorro_tbl, + .probe = icy_probe, + .remove = icy_remove, +}; + +module_driver(icy_driver, + zorro_register_driver, + zorro_unregister_driver); + +MODULE_AUTHOR("Max Staudt <max@enpas.org>"); +MODULE_DESCRIPTION("I2C bus via PCF8584 on ICY Zorro card"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index dc00fabc919a..c92b56485fa6 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -545,7 +545,6 @@ MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match); static int lpi2c_imx_probe(struct platform_device *pdev) { struct lpi2c_imx_struct *lpi2c_imx; - struct resource *res; unsigned int temp; int irq, ret; @@ -553,8 +552,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev) if (!lpi2c_imx) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - lpi2c_imx->base = devm_ioremap_resource(&pdev->dev, res); + lpi2c_imx->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(lpi2c_imx->base)) return PTR_ERR(lpi2c_imx->base); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 15f6cde6452f..a3b61336fe55 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -20,6 +20,7 @@ * */ +#include <linux/acpi.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> @@ -255,6 +256,12 @@ static const struct of_device_id i2c_imx_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids); +static const struct acpi_device_id i2c_imx_acpi_ids[] = { + {"NXP0001", .driver_data = (kernel_ulong_t)&vf610_i2c_hwdata}, + { } +}; +MODULE_DEVICE_TABLE(acpi, i2c_imx_acpi_ids); + static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx) { return i2c_imx->hwdata->devtype == IMX1_I2C; @@ -1048,14 +1055,13 @@ static const struct i2c_algorithm i2c_imx_algo = { static int i2c_imx_probe(struct platform_device *pdev) { - const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, - &pdev->dev); struct imx_i2c_struct *i2c_imx; struct resource *res; struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev); void __iomem *base; int irq, ret; dma_addr_t phy_addr; + const struct imx_i2c_hwdata *match; dev_dbg(&pdev->dev, "<%s>\n", __func__); @@ -1075,8 +1081,9 @@ static int i2c_imx_probe(struct platform_device *pdev) if (!i2c_imx) return -ENOMEM; - if (of_id) - i2c_imx->hwdata = of_id->data; + match = device_get_match_data(&pdev->dev); + if (match) + i2c_imx->hwdata = match; else i2c_imx->hwdata = (struct imx_i2c_hwdata *) platform_get_device_id(pdev)->driver_data; @@ -1089,6 +1096,7 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx->adapter.nr = pdev->id; i2c_imx->adapter.dev.of_node = pdev->dev.of_node; i2c_imx->base = base; + ACPI_COMPANION_SET(&i2c_imx->adapter.dev, ACPI_COMPANION(&pdev->dev)); /* Get I2C clock */ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); @@ -1247,6 +1255,7 @@ static struct platform_driver i2c_imx_driver = { .name = DRIVER_NAME, .pm = &i2c_imx_pm_ops, .of_match_table = i2c_imx_dt_ids, + .acpi_match_table = i2c_imx_acpi_ids, }, .id_table = imx_i2c_devtype, }; diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 02d23edb2fb1..2f95e25a10f7 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -781,8 +781,6 @@ static int ismt_dev_init(struct ismt_priv *priv) if (!priv->hw) return -ENOMEM; - memset(priv->hw, 0, (ISMT_DESC_ENTRIES * sizeof(struct ismt_desc))); - priv->head = 0; init_completion(&priv->cmp); diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 7d79317a1046..89224913f578 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -802,7 +802,6 @@ static int mxs_i2c_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct mxs_i2c_dev *i2c; struct i2c_adapter *adap; - struct resource *res; int err, irq; i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL); @@ -814,8 +813,7 @@ static int mxs_i2c_probe(struct platform_device *pdev) i2c->dev_type = device_id->driver_data; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - i2c->regs = devm_ioremap_resource(&pdev->dev, res); + i2c->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(i2c->regs)) return PTR_ERR(i2c->regs); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 4117f1abc7c6..ca8b3ecfa93d 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -703,8 +703,9 @@ static int ocores_i2c_probe(struct platform_device *pdev) } if (ocores_algorithm.master_xfer != ocores_xfer_polling) { - ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, - pdev->name, i2c); + ret = devm_request_any_context_irq(&pdev->dev, irq, + ocores_isr, 0, + pdev->name, i2c); if (ret) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); goto err_clk; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index cba325eb852f..30ded6422e7b 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -72,7 +72,8 @@ #define PIIX4_BLOCK_DATA 0x14 /* Multi-port constants */ -#define PIIX4_MAX_ADAPTERS 4 +#define PIIX4_MAX_ADAPTERS 4 +#define HUDSON2_MAIN_PORTS 2 /* HUDSON2, KERNCZ reserves ports 3, 4 */ /* SB800 constants */ #define SB800_PIIX4_SMB_IDX 0xcd6 @@ -806,10 +807,12 @@ MODULE_DEVICE_TABLE (pci, piix4_ids); static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; +static int piix4_adapter_count; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, bool sb800_main, u8 port, bool notify_imc, - const char *name, struct i2c_adapter **padap) + u8 hw_port_nr, const char *name, + struct i2c_adapter **padap) { struct i2c_adapter *adap; struct i2c_piix4_adapdata *adapdata; @@ -841,6 +844,12 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; + if (has_acpi_companion(&dev->dev)) { + acpi_preset_companion(&adap->dev, + ACPI_COMPANION(&dev->dev), + hw_port_nr); + } + snprintf(adap->name, sizeof(adap->name), "SMBus PIIX4 adapter%s at %04x", name, smba); @@ -865,8 +874,19 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba, int port; int retval; - for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) { + if (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || + (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + dev->revision >= 0x1F)) { + piix4_adapter_count = HUDSON2_MAIN_PORTS; + } else { + piix4_adapter_count = PIIX4_MAX_ADAPTERS; + } + + for (port = 0; port < piix4_adapter_count; port++) { + u8 hw_port_nr = port == 0 ? 0 : port + 1; + retval = piix4_add_adapter(dev, smba, true, port, notify_imc, + hw_port_nr, piix4_main_port_names_sb800[port], &piix4_main_adapters[port]); if (retval < 0) @@ -937,8 +957,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Try to register main SMBus adapter, give up if we can't */ - retval = piix4_add_adapter(dev, retval, false, 0, false, "", - &piix4_main_adapters[0]); + retval = piix4_add_adapter(dev, retval, false, 0, false, 0, + "", &piix4_main_adapters[0]); if (retval < 0) return retval; } @@ -964,7 +984,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval > 0) { /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, false, 0, false, + piix4_add_adapter(dev, retval, false, 0, false, 1, is_sb800 ? piix4_aux_port_name_sb800 : "", &piix4_aux_adapter); } @@ -987,7 +1007,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap) static void piix4_remove(struct pci_dev *dev) { - int port = PIIX4_MAX_ADAPTERS; + int port = piix4_adapter_count; while (--port >= 0) { if (piix4_main_adapters[port]) { diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 961123529678..b432e7580458 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -465,9 +466,9 @@ static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev) i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable"); if (IS_ERR(i2c_dev->clk)) { - dev_warn(i2c_dev->dev, "i2c%d can't get the enable clock\n", - i2c_dev->adap.nr); - i2c_dev->clk = NULL; + dev_err(i2c_dev->dev, "i2c%d can't get the enable clock\n", + i2c_dev->adap.nr); + return PTR_ERR(i2c_dev->clk); } return 0; @@ -477,7 +478,6 @@ static int sprd_i2c_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct sprd_i2c *i2c_dev; - struct resource *res; u32 prop; int ret; @@ -487,8 +487,7 @@ static int sprd_i2c_probe(struct platform_device *pdev) if (!i2c_dev) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - i2c_dev->base = devm_ioremap_resource(dev, res); + i2c_dev->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(i2c_dev->base)) return PTR_ERR(i2c_dev->base); @@ -520,7 +519,10 @@ static int sprd_i2c_probe(struct platform_device *pdev) if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000) return -EINVAL; - sprd_i2c_clk_init(i2c_dev); + ret = sprd_i2c_clk_init(i2c_dev); + if (ret) + return ret; + platform_set_drvdata(pdev, i2c_dev); ret = clk_prepare_enable(i2c_dev->clk); @@ -644,8 +646,7 @@ static struct platform_driver sprd_i2c_driver = { }, }; -static int sprd_i2c_init(void) -{ - return platform_driver_register(&sprd_i2c_driver); -} -arch_initcall_sync(sprd_i2c_init); +module_platform_driver(sprd_i2c_driver); + +MODULE_DESCRIPTION("Spreadtrum I2C master controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 266d1c269b83..d36cf08461f7 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1809,7 +1809,7 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap) I2C_FUNC_SMBUS_I2C_BLOCK; } -static struct i2c_algorithm stm32f7_i2c_algo = { +static const struct i2c_algorithm stm32f7_i2c_algo = { .master_xfer = stm32f7_i2c_xfer, .smbus_xfer = stm32f7_i2c_smbus_xfer, .functionality = stm32f7_i2c_func, diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index f724c8e6b360..39762f0611b1 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -526,7 +526,7 @@ static const struct i2c_algorithm synquacer_i2c_algo = { .functionality = synquacer_i2c_functionality, }; -static struct i2c_adapter synquacer_i2c_ops = { +static const struct i2c_adapter synquacer_i2c_ops = { .owner = THIS_MODULE, .name = "synquacer_i2c-adapter", .algo = &synquacer_i2c_algo, diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index 37347c93e8e0..0bff3f3a8779 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -39,7 +39,7 @@ struct taos_data { }; /* TAOS TSL2550 EVM */ -static struct i2c_board_info tsl2550_info = { +static const struct i2c_board_info tsl2550_info = { I2C_BOARD_INFO("tsl2550", 0x39), }; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 9fcb13beeb8f..c1683f9338b4 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -636,7 +636,7 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev) dvc_writel(i2c_dev, val, DVC_CTRL_REG1); } -static int tegra_i2c_runtime_resume(struct device *dev) +static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int ret; @@ -665,7 +665,7 @@ static int tegra_i2c_runtime_resume(struct device *dev) return 0; } -static int tegra_i2c_runtime_suspend(struct device *dev) +static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); @@ -713,12 +713,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit) u32 tsu_thd; u8 tlow, thigh; - err = pm_runtime_get_sync(i2c_dev->dev); - if (err < 0) { - dev_err(i2c_dev->dev, "runtime resume failed %d\n", err); - return err; - } - reset_control_assert(i2c_dev->rst); udelay(2); reset_control_deassert(i2c_dev->rst); @@ -772,7 +766,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit) if (err) { dev_err(i2c_dev->dev, "failed changing clock rate: %d\n", err); - goto err; + return err; } } @@ -787,23 +781,21 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit) err = tegra_i2c_flush_fifos(i2c_dev); if (err) - goto err; + return err; if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg) i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE); err = tegra_i2c_wait_for_config_load(i2c_dev); if (err) - goto err; + return err; if (i2c_dev->irq_disabled) { i2c_dev->irq_disabled = false; enable_irq(i2c_dev->irq); } -err: - pm_runtime_put(i2c_dev->dev); - return err; + return 0; } static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev) @@ -1616,12 +1608,14 @@ static int tegra_i2c_probe(struct platform_device *pdev) } pm_runtime_enable(&pdev->dev); - if (!pm_runtime_enabled(&pdev->dev)) { + if (!pm_runtime_enabled(&pdev->dev)) ret = tegra_i2c_runtime_resume(&pdev->dev); - if (ret < 0) { - dev_err(&pdev->dev, "runtime resume failed\n"); - goto unprepare_div_clk; - } + else + ret = pm_runtime_get_sync(i2c_dev->dev); + + if (ret < 0) { + dev_err(&pdev->dev, "runtime resume failed\n"); + goto unprepare_div_clk; } if (i2c_dev->is_multimaster_mode) { @@ -1666,6 +1660,8 @@ static int tegra_i2c_probe(struct platform_device *pdev) if (ret) goto release_dma; + pm_runtime_put(&pdev->dev); + return 0; release_dma: @@ -1711,8 +1707,7 @@ static int tegra_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int tegra_i2c_suspend(struct device *dev) +static int __maybe_unused tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); @@ -1721,38 +1716,41 @@ static int tegra_i2c_suspend(struct device *dev) return 0; } -static int tegra_i2c_resume(struct device *dev) +static int __maybe_unused tegra_i2c_resume(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int err; + err = tegra_i2c_runtime_resume(dev); + if (err) + return err; + err = tegra_i2c_init(i2c_dev, false); if (err) return err; + err = tegra_i2c_runtime_suspend(dev); + if (err) + return err; + i2c_mark_adapter_resumed(&i2c_dev->adapter); return 0; } static const struct dev_pm_ops tegra_i2c_pm = { - SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume) SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume, NULL) }; -#define TEGRA_I2C_PM (&tegra_i2c_pm) -#else -#define TEGRA_I2C_PM NULL -#endif - static struct platform_driver tegra_i2c_driver = { .probe = tegra_i2c_probe, .remove = tegra_i2c_remove, .driver = { .name = "tegra-i2c", .of_match_table = tegra_i2c_of_match, - .pm = TEGRA_I2C_PM, + .pm = &tegra_i2c_pm, }, }; diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c index 7acca2599f04..4241aac79e7e 100644 --- a/drivers/i2c/busses/i2c-uniphier-f.c +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -108,7 +108,6 @@ static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv, if (fifo_space-- <= 0) break; - dev_dbg(&priv->adap.dev, "write data: %02x\n", *priv->buf); writel(*priv->buf++, priv->membase + UNIPHIER_FI2C_DTTX); priv->len--; } @@ -124,7 +123,6 @@ static void uniphier_fi2c_drain_rxfifo(struct uniphier_fi2c_priv *priv) break; *priv->buf++ = readl(priv->membase + UNIPHIER_FI2C_DTRX); - dev_dbg(&priv->adap.dev, "read data: %02x\n", priv->buf[-1]); priv->len--; } } @@ -142,8 +140,6 @@ static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv, static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv) { - dev_dbg(&priv->adap.dev, "stop condition\n"); - priv->enabled_irqs |= UNIPHIER_FI2C_INT_STOP; uniphier_fi2c_set_irqs(priv); writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STO, @@ -160,21 +156,15 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id) irq_status = readl(priv->membase + UNIPHIER_FI2C_INT); irq_status &= priv->enabled_irqs; - dev_dbg(&priv->adap.dev, - "interrupt: enabled_irqs=%04x, irq_status=%04x\n", - priv->enabled_irqs, irq_status); - if (irq_status & UNIPHIER_FI2C_INT_STOP) goto complete; if (unlikely(irq_status & UNIPHIER_FI2C_INT_AL)) { - dev_dbg(&priv->adap.dev, "arbitration lost\n"); priv->error = -EAGAIN; goto complete; } if (unlikely(irq_status & UNIPHIER_FI2C_INT_NA)) { - dev_dbg(&priv->adap.dev, "could not get ACK\n"); priv->error = -ENXIO; if (priv->flags & UNIPHIER_FI2C_RD) { /* @@ -215,18 +205,14 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id) if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) { if (priv->len <= UNIPHIER_FI2C_FIFO_SIZE && !(priv->flags & UNIPHIER_FI2C_BYTE_WISE)) { - dev_dbg(&priv->adap.dev, - "enable read byte count IRQ\n"); priv->enabled_irqs |= UNIPHIER_FI2C_INT_RB; uniphier_fi2c_set_irqs(priv); priv->flags |= UNIPHIER_FI2C_BYTE_WISE; } - if (priv->len <= 1) { - dev_dbg(&priv->adap.dev, "set NACK\n"); + if (priv->len <= 1) writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_NACK, priv->membase + UNIPHIER_FI2C_CR); - } } goto handled; @@ -334,10 +320,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap, bool is_read = msg->flags & I2C_M_RD; unsigned long time_left, flags; - dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, repeat=%d, stop=%d\n", - is_read ? "receive" : "transmit", msg->addr, msg->len, - repeat, stop); - priv->len = msg->len; priv->buf = msg->buf; priv->enabled_irqs = UNIPHIER_FI2C_INT_FAULTS; @@ -359,7 +341,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap, else uniphier_fi2c_tx_init(priv, msg->addr, repeat); - dev_dbg(&adap->dev, "start condition\n"); /* * For a repeated START condition, writing a slave address to the FIFO * kicks the controller. So, the UNIPHIER_FI2C_CR register should be @@ -383,7 +364,6 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap, uniphier_fi2c_recover(priv); return -ETIMEDOUT; } - dev_dbg(&adap->dev, "complete\n"); if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) { u32 status; @@ -538,7 +518,6 @@ static int uniphier_fi2c_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct uniphier_fi2c_priv *priv; - struct resource *regs; u32 bus_speed; unsigned long clk_rate; int irq, ret; @@ -547,8 +526,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->membase = devm_ioremap_resource(dev, regs); + priv->membase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->membase)) return PTR_ERR(priv->membase); diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c index 0173840c32af..0270090c0360 100644 --- a/drivers/i2c/busses/i2c-uniphier.c +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -71,7 +71,6 @@ static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata, reinit_completion(&priv->comp); txdata |= UNIPHIER_I2C_DTRM_IRQEN; - dev_dbg(&adap->dev, "write data: 0x%04x\n", txdata); writel(txdata, priv->membase + UNIPHIER_I2C_DTRM); time_left = wait_for_completion_timeout(&priv->comp, adap->timeout); @@ -81,8 +80,6 @@ static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata, } rxdata = readl(priv->membase + UNIPHIER_I2C_DREC); - dev_dbg(&adap->dev, "read data: 0x%04x\n", rxdata); - if (rxdatap) *rxdatap = rxdata; @@ -98,14 +95,11 @@ static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata) if (ret) return ret; - if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) { - dev_dbg(&adap->dev, "arbitration lost\n"); + if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) return -EAGAIN; - } - if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) { - dev_dbg(&adap->dev, "could not get ACK\n"); + + if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) return -ENXIO; - } return 0; } @@ -115,7 +109,6 @@ static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len, { int ret; - dev_dbg(&adap->dev, "start condition\n"); ret = uniphier_i2c_send_byte(adap, addr << 1 | UNIPHIER_I2C_DTRM_STA | UNIPHIER_I2C_DTRM_NACK); @@ -137,7 +130,6 @@ static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len, { int ret; - dev_dbg(&adap->dev, "start condition\n"); ret = uniphier_i2c_send_byte(adap, addr << 1 | UNIPHIER_I2C_DTRM_STA | UNIPHIER_I2C_DTRM_NACK | @@ -161,7 +153,6 @@ static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len, static int uniphier_i2c_stop(struct i2c_adapter *adap) { - dev_dbg(&adap->dev, "stop condition\n"); return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO | UNIPHIER_I2C_DTRM_NACK); } @@ -173,9 +164,6 @@ static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap, bool recovery = false; int ret; - dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n", - is_read ? "receive" : "transmit", msg->addr, msg->len, stop); - if (is_read) ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf); else @@ -326,7 +314,6 @@ static int uniphier_i2c_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct uniphier_i2c_priv *priv; - struct resource *regs; u32 bus_speed; unsigned long clk_rate; int irq, ret; @@ -335,8 +322,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->membase = devm_ioremap_resource(dev, regs); + priv->membase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->membase)) return PTR_ERR(priv->membase); diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 72b300174cb8..5f6a4985f2bc 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -350,13 +350,11 @@ static int i2c_device_probe(struct device *dev) return -ENODEV; if (client->flags & I2C_CLIENT_WAKE) { - int wakeirq = -ENOENT; + int wakeirq; - if (dev->of_node) { - wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); - if (wakeirq == -EPROBE_DEFER) - return wakeirq; - } + wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); + if (wakeirq == -EPROBE_DEFER) + return wakeirq; device_init_wakeup(&client->dev, true); @@ -966,7 +964,7 @@ struct i2c_client *devm_i2c_new_dummy_device(struct device *dev, EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device); /** - * i2c_new_secondary_device - Helper to get the instantiated secondary address + * i2c_new_ancillary_device - Helper to get the instantiated secondary address * and create the associated device * @client: Handle to the primary client * @name: Handle to specify which secondary address to get @@ -985,9 +983,9 @@ EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device); * cell whose "reg-names" value matches the slave name. * * This returns the new i2c client, which should be saved for later use with - * i2c_unregister_device(); or NULL to indicate an error. + * i2c_unregister_device(); or an ERR_PTR to describe the error. */ -struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, +struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client, const char *name, u16 default_addr) { @@ -1002,9 +1000,9 @@ struct i2c_client *i2c_new_secondary_device(struct i2c_client *client, } dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr); - return i2c_new_dummy(client->adapter, addr); + return i2c_new_dummy_device(client->adapter, addr); } -EXPORT_SYMBOL_GPL(i2c_new_secondary_device); +EXPORT_SYMBOL_GPL(i2c_new_ancillary_device); /* ------------------------------------------------------------------------- */ diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index be65d3842878..92ff9991bae8 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -11,6 +11,13 @@ * pointer, yet implementation is deferred until the need actually arises. */ +/* + * FIXME: What to do if only 8 bits of a 16 bit address are sent? + * The ST-M24C64 sends only 0xff then. Needs verification with other + * EEPROMs, though. We currently use the 8 bit as a valid address. + */ + +#include <linux/bitfield.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> @@ -21,12 +28,18 @@ struct eeprom_data { struct bin_attribute bin; - bool first_write; spinlock_t buffer_lock; - u8 buffer_idx; + u16 buffer_idx; + u16 address_mask; + u8 num_address_bytes; + u8 idx_write_cnt; u8 buffer[]; }; +#define I2C_SLAVE_BYTELEN GENMASK(15, 0) +#define I2C_SLAVE_FLAG_ADDR16 BIT(16) +#define I2C_SLAVE_DEVICE_MAGIC(_len, _flags) ((_flags) | (_len)) + static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, enum i2c_slave_event event, u8 *val) { @@ -34,12 +47,14 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, switch (event) { case I2C_SLAVE_WRITE_RECEIVED: - if (eeprom->first_write) { - eeprom->buffer_idx = *val; - eeprom->first_write = false; + if (eeprom->idx_write_cnt < eeprom->num_address_bytes) { + if (eeprom->idx_write_cnt == 0) + eeprom->buffer_idx = 0; + eeprom->buffer_idx = *val | (eeprom->buffer_idx << 8); + eeprom->idx_write_cnt++; } else { spin_lock(&eeprom->buffer_lock); - eeprom->buffer[eeprom->buffer_idx++] = *val; + eeprom->buffer[eeprom->buffer_idx++ & eeprom->address_mask] = *val; spin_unlock(&eeprom->buffer_lock); } break; @@ -50,7 +65,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, /* fallthrough */ case I2C_SLAVE_READ_REQUESTED: spin_lock(&eeprom->buffer_lock); - *val = eeprom->buffer[eeprom->buffer_idx]; + *val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask]; spin_unlock(&eeprom->buffer_lock); /* * Do not increment buffer_idx here, because we don't know if @@ -61,7 +76,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, case I2C_SLAVE_STOP: case I2C_SLAVE_WRITE_REQUESTED: - eeprom->first_write = true; + eeprom->idx_write_cnt = 0; break; default: @@ -105,13 +120,16 @@ static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_de { struct eeprom_data *eeprom; int ret; - unsigned size = id->driver_data; + unsigned int size = FIELD_GET(I2C_SLAVE_BYTELEN, id->driver_data); + unsigned int flag_addr16 = FIELD_GET(I2C_SLAVE_FLAG_ADDR16, id->driver_data); eeprom = devm_kzalloc(&client->dev, sizeof(struct eeprom_data) + size, GFP_KERNEL); if (!eeprom) return -ENOMEM; - eeprom->first_write = true; + eeprom->idx_write_cnt = 0; + eeprom->num_address_bytes = flag_addr16 ? 2 : 1; + eeprom->address_mask = size - 1; spin_lock_init(&eeprom->buffer_lock); i2c_set_clientdata(client, eeprom); @@ -146,7 +164,9 @@ static int i2c_slave_eeprom_remove(struct i2c_client *client) } static const struct i2c_device_id i2c_slave_eeprom_id[] = { - { "slave-24c02", 2048 / 8 }, + { "slave-24c02", I2C_SLAVE_DEVICE_MAGIC(2048 / 8, 0) }, + { "slave-24c32", I2C_SLAVE_DEVICE_MAGIC(32768 / 8, I2C_SLAVE_FLAG_ADDR16) }, + { "slave-24c64", I2C_SLAVE_DEVICE_MAGIC(65536 / 8, I2C_SLAVE_FLAG_ADDR16) }, { } }; MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id); diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c index 0a47d474e97a..23e02ff27b17 100644 --- a/drivers/media/i2c/adv748x/adv748x-core.c +++ b/drivers/media/i2c/adv748x/adv748x-core.c @@ -183,14 +183,14 @@ static int adv748x_initialise_clients(struct adv748x_state *state) int ret; for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) { - state->i2c_clients[i] = i2c_new_secondary_device( + state->i2c_clients[i] = i2c_new_ancillary_device( state->client, adv748x_default_addresses[i].name, adv748x_default_addresses[i].default_addr); - if (state->i2c_clients[i] == NULL) { + if (IS_ERR(state->i2c_clients[i])) { adv_err(state, "failed to create i2c client %u\n", i); - return -ENOMEM; + return PTR_ERR(state->i2c_clients[i]); } ret = adv748x_configure_regmap(state, i); diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 28a84bf9f8a9..2dedd6ebb236 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2862,10 +2862,8 @@ static void adv76xx_unregister_clients(struct adv76xx_state *state) { unsigned int i; - for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i) { - if (state->i2c_clients[i]) - i2c_unregister_device(state->i2c_clients[i]); - } + for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i) + i2c_unregister_device(state->i2c_clients[i]); } static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd, @@ -2878,14 +2876,14 @@ static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd, struct i2c_client *new_client; if (pdata && pdata->i2c_addresses[page]) - new_client = i2c_new_dummy(client->adapter, + new_client = i2c_new_dummy_device(client->adapter, pdata->i2c_addresses[page]); else - new_client = i2c_new_secondary_device(client, + new_client = i2c_new_ancillary_device(client, adv76xx_default_addresses[page].name, adv76xx_default_addresses[page].default_addr); - if (new_client) + if (!IS_ERR(new_client)) io_write(sd, io_reg, new_client->addr << 1); return new_client; @@ -3516,15 +3514,19 @@ static int adv76xx_probe(struct i2c_client *client, } for (i = 1; i < ADV76XX_PAGE_MAX; ++i) { + struct i2c_client *dummy_client; + if (!(BIT(i) & state->info->page_mask)) continue; - state->i2c_clients[i] = adv76xx_dummy_client(sd, i); - if (!state->i2c_clients[i]) { - err = -EINVAL; + dummy_client = adv76xx_dummy_client(sd, i); + if (IS_ERR(dummy_client)) { + err = PTR_ERR(dummy_client); v4l2_err(sd, "failed to create i2c client %u\n", i); goto err_i2c; } + + state->i2c_clients[i] = dummy_client; } INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug, diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 518945b2f737..2cccd82a3106 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -14,7 +14,6 @@ #include <linux/delay.h> #include <linux/mutex.h> #include <linux/mod_devicetable.h> -#include <linux/log2.h> #include <linux/bitops.h> #include <linux/jiffies.h> #include <linux/property.h> diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index c559f706ae7e..156360e37714 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -48,6 +48,7 @@ /* Includes */ #include <linux/acpi.h> /* For ACPI support */ +#include <linux/bits.h> /* For BIT() */ #include <linux/module.h> /* For module specific items */ #include <linux/moduleparam.h> /* For new moduleparam's */ #include <linux/types.h> /* For standard types (like size_t) */ @@ -215,6 +216,23 @@ static int update_no_reboot_bit_mem(void *priv, bool set) return 0; } +static int update_no_reboot_bit_cnt(void *priv, bool set) +{ + struct iTCO_wdt_private *p = priv; + u16 val, newval; + + val = inw(TCO1_CNT(p)); + if (set) + val |= BIT(0); + else + val &= ~BIT(0); + outw(val, TCO1_CNT(p)); + newval = inw(TCO1_CNT(p)); + + /* make sure the update is successful */ + return val != newval ? -EIO : 0; +} + static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, struct itco_wdt_platform_data *pdata) { @@ -224,7 +242,9 @@ static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p, return; } - if (p->iTCO_version >= 2) + if (p->iTCO_version >= 6) + p->update_no_reboot_bit = update_no_reboot_bit_cnt; + else if (p->iTCO_version >= 2) p->update_no_reboot_bit = update_no_reboot_bit_mem; else if (p->iTCO_version == 1) p->update_no_reboot_bit = update_no_reboot_bit_pci; @@ -452,7 +472,8 @@ static int iTCO_wdt_probe(struct platform_device *pdev) * Get the Memory-Mapped GCS or PMC register, we need it for the * NO_REBOOT flag (TCO v2 and v3). */ - if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) { + if (p->iTCO_version >= 2 && p->iTCO_version < 6 && + !pdata->update_no_reboot_bit) { p->gcs_pmc_res = platform_get_resource(pdev, IORESOURCE_MEM, ICH_RES_MEM_GCS_PMC); @@ -502,6 +523,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev) /* Clear out the (probably old) status */ switch (p->iTCO_version) { + case 6: case 5: case 4: outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index c0a78c069117..1361637c369d 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -473,7 +473,7 @@ extern struct i2c_client * devm_i2c_new_dummy_device(struct device *dev, struct i2c_adapter *adap, u16 address); extern struct i2c_client * -i2c_new_secondary_device(struct i2c_client *client, +i2c_new_ancillary_device(struct i2c_client *client, const char *name, u16 default_addr); |