summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/DocBook/Makefile2
-rw-r--r--Documentation/DocBook/w1.tmpl101
-rw-r--r--Documentation/connector/cn_test.c2
-rw-r--r--Documentation/devices.txt2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt (renamed from Documentation/devicetree/bindings/powerpc/fsl/ifc.txt)0
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt210
-rw-r--r--Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt4
-rw-r--r--Documentation/devicetree/bindings/misc/sram.txt35
-rw-r--r--Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt61
-rw-r--r--Documentation/devicetree/bindings/spmi/spmi.txt41
-rw-r--r--Documentation/fmc/fmc-write-eeprom.txt77
-rw-r--r--Documentation/w1/masters/ds24902
-rw-r--r--Documentation/w1/w1.netlink8
-rw-r--r--MAINTAINERS6
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi2
-rw-r--r--arch/avr32/boards/mimc200/Makefile2
-rw-r--r--arch/avr32/boards/mimc200/fram.c82
-rw-r--r--arch/powerpc/Kconfig4
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--drivers/Kconfig4
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/base/regmap/regmap-spmi.c228
-rw-r--r--drivers/char/agp/frontend.c1
-rw-r--r--drivers/char/agp/generic.c1
-rw-r--r--drivers/char/agp/intel-gtt.c1
-rw-r--r--drivers/char/agp/sgi-agp.c1
-rw-r--r--drivers/char/hw_random/bcm2835-rng.c1
-rw-r--r--drivers/char/hw_random/core.c1
-rw-r--r--drivers/char/hw_random/exynos-rng.c1
-rw-r--r--drivers/char/hw_random/n2-drv.c1
-rw-r--r--drivers/char/hw_random/nomadik-rng.c1
-rw-r--r--drivers/char/hw_random/octeon-rng.c1
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c1
-rw-r--r--drivers/char/mem.c6
-rw-r--r--drivers/char/mwave/3780i.c1
-rw-r--r--drivers/char/tile-srom.c1
-rw-r--r--drivers/char/tpm/tpm_i2c_infineon.c1
-rw-r--r--drivers/char/tpm/tpm_i2c_stm_st33.c1
-rw-r--r--drivers/connector/cn_proc.c18
-rw-r--r--drivers/connector/connector.c20
-rw-r--r--drivers/extcon/Kconfig4
-rw-r--r--drivers/extcon/Makefile2
-rw-r--r--drivers/extcon/extcon-class.c42
-rw-r--r--drivers/extcon/extcon-gpio.c4
-rw-r--r--drivers/extcon/extcon-palmas.c5
-rw-r--r--drivers/extcon/of_extcon.c64
-rw-r--r--drivers/fmc/fmc-core.c22
-rw-r--r--drivers/fmc/fmc-sdb.c41
-rw-r--r--drivers/hv/Makefile2
-rw-r--r--drivers/hv/channel.c42
-rw-r--r--drivers/hv/hv_balloon.c3
-rw-r--r--drivers/hv/hv_fcopy.c414
-rw-r--r--drivers/hv/hv_kvp.c4
-rw-r--r--drivers/hv/hv_snapshot.c2
-rw-r--r--drivers/hv/hv_util.c11
-rw-r--r--drivers/hv/hyperv_vmbus.h8
-rw-r--r--drivers/hv/ring_buffer.c17
-rw-r--r--drivers/hv/vmbus_drv.c51
-rw-r--r--drivers/iio/adc/Kconfig10
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/men_z188_adc.c172
-rw-r--r--drivers/mcb/Kconfig31
-rw-r--r--drivers/mcb/Makefile7
-rw-r--r--drivers/mcb/mcb-core.c414
-rw-r--r--drivers/mcb/mcb-internal.h118
-rw-r--r--drivers/mcb/mcb-parse.c159
-rw-r--r--drivers/mcb/mcb-pci.c114
-rw-r--r--drivers/md/dm-log-userspace-transfer.c2
-rw-r--r--drivers/memory/Kconfig15
-rw-r--r--drivers/memory/Makefile2
-rw-r--r--drivers/memory/fsl_ifc.c (renamed from arch/powerpc/sysdev/fsl_ifc.c)8
-rw-r--r--drivers/memory/ti-aemif.c427
-rw-r--r--drivers/misc/Kconfig2
-rw-r--r--drivers/misc/ad525x_dpot.c1
-rw-r--r--drivers/misc/apds9802als.c1
-rw-r--r--drivers/misc/bmp085.c1
-rw-r--r--drivers/misc/carma/carma-fpga.c1
-rw-r--r--drivers/misc/ds1682.c1
-rw-r--r--drivers/misc/eeprom/at25.c1
-rw-r--r--drivers/misc/eeprom/eeprom.c1
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c1
-rw-r--r--drivers/misc/eeprom/max6875.c1
-rw-r--r--drivers/misc/eeprom/sunxi_sid.c3
-rw-r--r--drivers/misc/genwqe/card_debugfs.c1
-rw-r--r--drivers/misc/hmc6352.c1
-rw-r--r--drivers/misc/isl29003.c1
-rw-r--r--drivers/misc/isl29020.c1
-rw-r--r--drivers/misc/lattice-ecp3-config.c1
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d.c1
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d_i2c.c1
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d_spi.c1
-rw-r--r--drivers/misc/lkdtm.c74
-rw-r--r--drivers/misc/mei/Kconfig9
-rw-r--r--drivers/misc/mei/Makefile6
-rw-r--r--drivers/misc/mei/amthif.c72
-rw-r--r--drivers/misc/mei/bus.c21
-rw-r--r--drivers/misc/mei/client.c300
-rw-r--r--drivers/misc/mei/client.h30
-rw-r--r--drivers/misc/mei/debugfs.c54
-rw-r--r--drivers/misc/mei/hbm.c281
-rw-r--r--drivers/misc/mei/hbm.h1
-rw-r--r--drivers/misc/mei/hw-me.c30
-rw-r--r--drivers/misc/mei/hw-txe-regs.h294
-rw-r--r--drivers/misc/mei/hw-txe.c1107
-rw-r--r--drivers/misc/mei/hw-txe.h74
-rw-r--r--drivers/misc/mei/hw.h20
-rw-r--r--drivers/misc/mei/init.c43
-rw-r--r--drivers/misc/mei/interrupt.c159
-rw-r--r--drivers/misc/mei/main.c23
-rw-r--r--drivers/misc/mei/mei_dev.h54
-rw-r--r--drivers/misc/mei/nfc.c14
-rw-r--r--drivers/misc/mei/pci-me.c14
-rw-r--r--drivers/misc/mei/pci-txe.c293
-rw-r--r--drivers/misc/mei/wd.c136
-rw-r--r--drivers/misc/mic/host/mic_intr.c2
-rw-r--r--drivers/misc/pch_phub.c5
-rw-r--r--drivers/misc/sram.c127
-rw-r--r--drivers/misc/ti-st/st_core.c1
-rw-r--r--drivers/misc/ti_dac7512.c1
-rw-r--r--drivers/misc/tsl2550.c1
-rw-r--r--drivers/misc/vmw_vmci/vmci_guest.c7
-rw-r--r--drivers/mtd/nand/Kconfig1
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c2
-rw-r--r--drivers/parport/share.c3
-rw-r--r--drivers/spmi/Kconfig27
-rw-r--r--drivers/spmi/Makefile6
-rw-r--r--drivers/spmi/spmi-pmic-arb.c778
-rw-r--r--drivers/spmi/spmi.c574
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c3
-rw-r--r--drivers/video/hyperv_fb.c88
-rw-r--r--drivers/video/uvesafb.c4
-rw-r--r--drivers/vme/bridges/vme_ca91cx42.c29
-rw-r--r--drivers/vme/bridges/vme_tsi148.c18
-rw-r--r--drivers/w1/masters/Kconfig3
-rw-r--r--drivers/w1/masters/ds2490.c155
-rw-r--r--drivers/w1/masters/mxc_w1.c43
-rw-r--r--drivers/w1/masters/w1-gpio.c19
-rw-r--r--drivers/w1/slaves/Kconfig5
-rw-r--r--drivers/w1/slaves/w1_therm.c21
-rw-r--r--drivers/w1/w1.c269
-rw-r--r--drivers/w1/w1.h186
-rw-r--r--drivers/w1/w1_family.c8
-rw-r--r--drivers/w1/w1_family.h13
-rw-r--r--drivers/w1/w1_int.c25
-rw-r--r--drivers/w1/w1_io.c102
-rw-r--r--drivers/w1/w1_netlink.c359
-rw-r--r--drivers/w1/w1_netlink.h33
-rw-r--r--include/dt-bindings/spmi/spmi.h18
-rw-r--r--include/linux/connector.h2
-rw-r--r--include/linux/extcon.h12
-rw-r--r--include/linux/extcon/of_extcon.h31
-rw-r--r--include/linux/fmc-sdb.h2
-rw-r--r--include/linux/fsl_ifc.h (renamed from arch/powerpc/include/asm/fsl_ifc.h)0
-rw-r--r--include/linux/hyperv.h353
-rw-r--r--include/linux/mcb.h119
-rw-r--r--include/linux/miscdevice.h16
-rw-r--r--include/linux/mod_devicetable.h13
-rw-r--r--include/linux/regmap.h12
-rw-r--r--include/linux/spmi.h191
-rw-r--r--include/uapi/linux/Kbuild1
-rw-r--r--include/uapi/linux/hyperv.h390
-rw-r--r--tools/Makefile11
-rw-r--r--tools/hv/Makefile13
-rw-r--r--tools/hv/hv_fcopy_daemon.c195
-rw-r--r--tools/hv/hv_vss_daemon.c2
167 files changed, 8865 insertions, 1722 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 0f9c6ff41aac..8d96ebf524e9 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
- tracepoint.xml drm.xml media_api.xml
+ tracepoint.xml drm.xml media_api.xml w1.xml
include $(srctree)/Documentation/DocBook/media/Makefile
diff --git a/Documentation/DocBook/w1.tmpl b/Documentation/DocBook/w1.tmpl
new file mode 100644
index 000000000000..b0228d4c81bb
--- /dev/null
+++ b/Documentation/DocBook/w1.tmpl
@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="w1id">
+ <bookinfo>
+ <title>W1: Dallas' 1-wire bus</title>
+
+ <authorgroup>
+ <author>
+ <firstname>David</firstname>
+ <surname>Fries</surname>
+ <affiliation>
+ <address>
+ <email>David@Fries.net</email>
+ </address>
+ </affiliation>
+ </author>
+
+ </authorgroup>
+
+ <copyright>
+ <year>2013</year>
+ <!--
+ <holder></holder>
+ -->
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="w1_internal">
+ <title>W1 API internal to the kernel</title>
+
+ <sect1 id="w1_internal_api">
+ <title>W1 API internal to the kernel</title>
+ <sect2 id="w1.h">
+ <title>drivers/w1/w1.h</title>
+ <para>W1 core functions.</para>
+!Idrivers/w1/w1.h
+ </sect2>
+
+ <sect2 id="w1.c">
+ <title>drivers/w1/w1.c</title>
+ <para>W1 core functions.</para>
+!Idrivers/w1/w1.c
+ </sect2>
+
+ <sect2 id="w1_family.h">
+ <title>drivers/w1/w1_family.h</title>
+ <para>Allows registering device family operations.</para>
+!Idrivers/w1/w1_family.h
+ </sect2>
+
+ <sect2 id="w1_family.c">
+ <title>drivers/w1/w1_family.c</title>
+ <para>Allows registering device family operations.</para>
+!Edrivers/w1/w1_family.c
+ </sect2>
+
+ <sect2 id="w1_int.c">
+ <title>drivers/w1/w1_int.c</title>
+ <para>W1 internal initialization for master devices.</para>
+!Edrivers/w1/w1_int.c
+ </sect2>
+
+ <sect2 id="w1_netlink.h">
+ <title>drivers/w1/w1_netlink.h</title>
+ <para>W1 external netlink API structures and commands.</para>
+!Idrivers/w1/w1_netlink.h
+ </sect2>
+
+ <sect2 id="w1_io.c">
+ <title>drivers/w1/w1_io.c</title>
+ <para>W1 input/output.</para>
+!Edrivers/w1/w1_io.c
+!Idrivers/w1/w1_io.c
+ </sect2>
+
+ </sect1>
+
+
+ </chapter>
+
+</book>
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index adcca0368d60..d12cc944b696 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -145,7 +145,7 @@ static void cn_test_timer_func(unsigned long __data)
memcpy(m + 1, data, m->len);
- cn_netlink_send(m, 0, GFP_ATOMIC);
+ cn_netlink_send(m, 0, 0, GFP_ATOMIC);
kfree(m);
}
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 10378cc48374..087d2122b204 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -410,6 +410,7 @@ Your cooperation is appreciated.
194 = /dev/zkshim Zero-Knowledge network shim control
195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
196 = /dev/vfio/vfio VFIO userspace driver interface
+ 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
198 = /dev/sexec Signed executable interface
199 = /dev/scanners/cuecat :CueCat barcode scanner
200 = /dev/net/tun TAP/TUN network device
@@ -451,6 +452,7 @@ Your cooperation is appreciated.
236 = /dev/mapper/control Device-Mapper control device
237 = /dev/loop-control Loopback control device
238 = /dev/vhost-net Host kernel accelerator for virtio net
+ 239 = /dev/uhid User-space I/O driver support for HID subsystem
240-254 Reserved for local use
255 Reserved for MISC_DYNAMIC_MINOR
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
index d5e370450ac0..d5e370450ac0 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
new file mode 100644
index 000000000000..9592717f483f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
@@ -0,0 +1,210 @@
+* Device tree bindings for Texas instruments AEMIF controller
+
+The Async External Memory Interface (EMIF16/AEMIF) controller is intended to
+provide a glue-less interface to a variety of asynchronous memory devices like
+ASRA M, NOR and NAND memory. A total of 256M bytes of any of these memories
+can be accessed at any given time via four chip selects with 64M byte access
+per chip select. Synchronous memories such as DDR1 SD RAM, SDR SDRAM
+and Mobile SDR are not supported.
+
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
+Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+
+Required properties:
+
+- compatible: "ti,davinci-aemif"
+ "ti,keystone-aemif"
+ "ti,da850-aemif"
+
+- reg: contains offset/length value for AEMIF control registers
+ space.
+
+- #address-cells: Must be 2. The partition number has to be encoded in the
+ first address cell and it may accept values 0..N-1
+ (N - total number of partitions). It's recommended to
+ assign N-1 number for the control partition. The second
+ cell is the offset into the partition.
+
+- #size-cells: Must be set to 1.
+
+- ranges: Contains memory regions. There are two types of
+ ranges/partitions:
+ - CS-specific partition/range. If continuous, must be
+ set up to reflect the memory layout for 4 chipselects,
+ if not then additional range/partition can be added and
+ child device can select the proper one.
+ - control partition which is common for all CS
+ interfaces.
+
+- clocks: the clock feeding the controller clock. Required only
+ if clock tree data present in device tree.
+ See clock-bindings.txt
+
+- clock-names: clock name. It has to be "aemif". Required only if clock
+ tree data present in device tree, in another case don't
+ use it.
+ See clock-bindings.txt
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+ See clock-bindings.txt
+
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND (ti,davinci-nand, see davinci-nand.txt).
+There might be board specific devices like FPGAs.
+
+Required child cs node properties:
+
+- #address-cells: Must be 2.
+
+- #size-cells: Must be 1.
+
+- ranges: Empty property indicating that child nodes can inherit
+ memory layout.
+
+- clock-ranges: Empty property indicating that child nodes can inherit
+ named clocks. Required only if clock tree data present
+ in device tree.
+
+- ti,cs-chipselect: number of chipselect. Indicates on the aemif driver
+ which chipselect is used for accessing the memory. For
+ compatibles "ti,davinci-aemif" and "ti,keystone-aemif"
+ it can be in range [0-3]. For compatible
+ "ti,da850-aemif" range is [2-5].
+
+Optional child cs node properties:
+
+- ti,cs-bus-width: width of the asynchronous device's data bus
+ 8 or 16 if not preset 8
+
+- ti,cs-select-strobe-mode: enable/disable select strobe mode
+ In select strobe mode chip select behaves as
+ the strobe and is active only during the strobe
+ period. If present then enable.
+
+- ti,cs-extended-wait-mode: enable/disable extended wait mode
+ if set, the controller monitors the EMIFWAIT pin
+ mapped to that chip select to determine if the
+ device wants to extend the strobe period. If
+ present then enable.
+
+- ti,cs-min-turnaround-ns: minimum turn around time, ns
+ Time between the end of one asynchronous memory
+ access and the start of another asynchronous
+ memory access. This delay is not incurred
+ between a read followed by read or a write
+ followed by a write to same chip select.
+
+- ti,cs-read-setup-ns: read setup width, ns
+ Time between the beginning of a memory cycle
+ and the activation of read strobe.
+ Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-strobe-ns: read strobe width, ns
+ Time between the activation and deactivation of
+ the read strobe.
+ Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-hold-ns: read hold width, ns
+ Time between the deactivation of the read
+ strobe and the end of the cycle (which may be
+ either an address change or the deactivation of
+ the chip select signal.
+ Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-setup-ns: write setup width, ns
+ Time between the beginning of a memory cycle
+ and the activation of write strobe.
+ Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-strobe-ns: write strobe width, ns
+ Time between the activation and deactivation of
+ the write strobe.
+ Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-hold-ns: write hold width, ns
+ Time between the deactivation of the write
+ strobe and the end of the cycle (which may be
+ either an address change or the deactivation of
+ the chip select signal.
+ Minimum value is 1 (0 treated as 1).
+
+If any of the above parameters are absent, current parameter value will be taken
+from the corresponding HW reg.
+
+Example for aemif, davinci nand and nor flash chip select shown below.
+
+memory-controller@21000A00 {
+ compatible = "ti,davinci-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clkaemif 0>;
+ clock-names = "aemif";
+ clock-ranges;
+ reg = <0x21000A00 0x00000100>;
+ ranges = <0 0 0x70000000 0x10000000
+ 1 0 0x21000A00 0x00000100>;
+ /*
+ * Partition0: CS-specific memory range which is
+ * implemented as continuous physical memory region
+ * Partition1: control memory range
+ */
+
+ nand:cs2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <2>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <0>;
+ ti,cs-read-hold-ns = <7>;
+ ti,cs-read-strobe-ns = <42>;
+ ti,cs-read-setup-ns = <14>;
+ ti,cs-write-hold-ns = <7>;
+ ti,cs-write-strobe-ns = <42>;
+ ti,cs-write-setup-ns = <14>;
+
+ nand@0,0x8000000 {
+ compatible = "ti,davinci-nand";
+ reg = <0 0x8000000 0x4000000
+ 1 0x0000000 0x0000100>;
+ /*
+ * Partition0, offset 0x8000000, size 0x4000000
+ * Partition1, offset 0x0000000, size 0x0000100
+ */
+
+ .. see davinci-nand.txt
+ };
+ };
+
+ nor:cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <0>;
+ ti,cs-read-hold-ns = <8>;
+ ti,cs-read-strobe-ns = <40>;
+ ti,cs-read-setup-ns = <14>;
+ ti,cs-write-hold-ns = <7>;
+ ti,cs-write-strobe-ns = <40>;
+ ti,cs-write-setup-ns = <14>;
+ ti,cs-bus-width = <16>;
+
+ flash@0,0x0000000 {
+ compatible = "cfi-flash";
+ reg = <0 0x0000000 0x4000000>;
+
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
index 68ba37295565..fabdf64a5737 100644
--- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
@@ -1,12 +1,12 @@
Allwinner sunxi-sid
Required properties:
-- compatible: "allwinner,sun4i-sid" or "allwinner,sun7i-a20-sid".
+- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
- reg: Should contain registers location and length
Example for sun4i:
sid@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>
};
diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt
index 4d0a00e453a8..36cbe5aea990 100644
--- a/Documentation/devicetree/bindings/misc/sram.txt
+++ b/Documentation/devicetree/bindings/misc/sram.txt
@@ -8,9 +8,44 @@ Required properties:
- reg : SRAM iomem address range
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should translate from local addresses
+ within the sram to bus addresses
+
+Required properties in the area nodes:
+
+- reg : iomem address range, relative to the SRAM range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition, should contain a vendor specific string
+ in the form <vendor>,[<device>-]<usage>
+
Example:
sram: sram@5c000000 {
compatible = "mmio-sram";
reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram@100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
new file mode 100644
index 000000000000..715d0998af8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -0,0 +1,61 @@
+Qualcomm SPMI Controller (PMIC Arbiter)
+
+The SPMI PMIC Arbiter is found on the Snapdragon 800 Series. It is an SPMI
+controller with wrapping arbitration logic to allow for multiple on-chip
+devices to control a single SPMI master.
+
+The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+to slave devices.
+
+See spmi.txt for the generic SPMI controller binding requirements for child
+nodes.
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+generic interrupt controller binding documentation.
+
+Required properties:
+- compatible : should be "qcom,spmi-pmic-arb".
+- reg-names : must contain:
+ "core" - core registers
+ "intr" - interrupt controller registers
+ "cnfg" - configuration registers
+- reg : address + size pairs describing the PMIC arb register sets; order must
+ correspond with the order of entries in reg-names
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+- qcom,ee : indicates the active Execution Environment identifier (0-5)
+- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
+- interrupts : interrupt list for the PMIC Arb controller, must contain a
+ single interrupt entry for the peripheral interrupt
+- interrupt-names : corresponding interrupt names for the interrupts
+ listed in the 'interrupts' property, must contain:
+ "periph_irq" - summary interrupt for PMIC peripherals
+- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
+- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information, as defined in
+ dt-bindings/interrupt-controller/irq.h
+
+Example:
+
+ spmi {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
new file mode 100644
index 000000000000..462a42fb3a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.txt
@@ -0,0 +1,41 @@
+System Power Management Interface (SPMI) Controller
+
+This document defines a generic set of bindings for use by SPMI controllers. A
+controller is modelled in device tree as a node with zero or more child nodes,
+each representing a unique slave on the bus.
+
+Required properties:
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+
+Child nodes:
+
+An SPMI controller node can contain zero or more child nodes representing slave
+devices on the bus. Child 'reg' properties are specified as an address, type
+pair. The address must be in the range 0-15 (4 bits). The type must be one of
+SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
+These are the identifiers "statically assigned by the system integrator", as
+per the SPMI spec.
+
+Each child node must have one and only one 'reg' entry of type SPMI_USID.
+
+#include <dt-bindings/spmi/spmi.h>
+
+ spmi@.. {
+ compatible = "...";
+ reg = <...>;
+
+ #address-cells = <2>;
+ #size-cells <0>;
+
+ child@0 {
+ compatible = "...";
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ compatible = "...";
+ reg = <7 SPMI_USID
+ 3 SPMI_GSID>;
+ };
+ };
diff --git a/Documentation/fmc/fmc-write-eeprom.txt b/Documentation/fmc/fmc-write-eeprom.txt
index 44a3bc678bf0..e0a9712156aa 100644
--- a/Documentation/fmc/fmc-write-eeprom.txt
+++ b/Documentation/fmc/fmc-write-eeprom.txt
@@ -9,7 +9,12 @@ Overwriting the EEPROM is not something you should do daily, and it is
expected to only happen during manufacturing. For this reason, the
module makes it unlikely for the random user to change a working EEPROM.
-The module takes the following measures:
+However, since the EEPROM may include application-specific information
+other than the identification, later versions of this packages added
+write-support through sysfs. See *note Accessing the EEPROM::.
+
+To avoid damaging the EEPROM content, the module takes the following
+measures:
* It accepts a `file=' argument (within /lib/firmware) and if no
such argument is received, it doesn't write anything to EEPROM
@@ -70,56 +75,24 @@ first time.
[ 132.899872] fake-fmc: Product name: FmcDelay1ns4cha
-Writing to the EEPROM
+Accessing the EEPROM
=====================
-Once you have created a binary file for your EEPROM, you can write it
-to the storage medium using the fmc-write-eeprom (See *note
-fmc-write-eeprom::, while relying on a carrier driver. The procedure
-here shown here uses the SPEC driver
-(`http://www.ohwr.org/projects/spec-sw').
-
-The example assumes no driver is already loaded (actually, I unloaded
-them by hand as everything loads automatically at boot time after you
-installed the modules), and shows kernel messages together with
-commands. Here the prompt is spusa.root# and two SPEC cards are plugged
-in the system.
-
- spusa.root# insmod fmc.ko
- spusa.root# insmod spec.ko
- [13972.382818] spec 0000:02:00.0: probe for device 0002:0000
- [13972.392773] spec 0000:02:00.0: got file "fmc/spec-init.bin", 1484404 (0x16a674) bytes
- [13972.591388] spec 0000:02:00.0: FPGA programming successful
- [13972.883011] spec 0000:02:00.0: EEPROM has no FRU information
- [13972.888719] spec 0000:02:00.0: No device_id filled, using index
- [13972.894676] spec 0000:02:00.0: No mezzanine_name found
- [13972.899863] /home/rubini/wip/spec-sw/kernel/spec-gpio.c - spec_gpio_init
- [13972.906578] spec 0000:04:00.0: probe for device 0004:0000
- [13972.916509] spec 0000:04:00.0: got file "fmc/spec-init.bin", 1484404 (0x16a674) bytes
- [13973.115096] spec 0000:04:00.0: FPGA programming successful
- [13973.401798] spec 0000:04:00.0: EEPROM has no FRU information
- [13973.407474] spec 0000:04:00.0: No device_id filled, using index
- [13973.413417] spec 0000:04:00.0: No mezzanine_name found
- [13973.418600] /home/rubini/wip/spec-sw/kernel/spec-gpio.c - spec_gpio_init
- spusa.root# ls /sys/bus/fmc/devices
- fmc-0000 fmc-0001
- spusa.root# insmod fmc-write-eeprom.ko busid=0x0200 file=fdelay-eeprom.bin
- [14103.966259] spec 0000:02:00.0: Matching an generic driver (no ID)
- [14103.975519] spec 0000:02:00.0: programming 6155 bytes
- [14126.373762] spec 0000:02:00.0: write_eeprom: success
- [14126.378770] spec 0000:04:00.0: Matching an generic driver (no ID)
- [14126.384903] spec 0000:04:00.0: fmc_write_eeprom: no filename given: not programming
- [14126.392600] fmc_write_eeprom: probe of fmc-0001 failed with error -2
-
-Reading back the EEPROM
-=======================
-
-In order to read back the binary content of the EEPROM of your
-mezzanine device, the bus creates a read-only sysfs file called eeprom
-for each mezzanine it knows about:
-
- spusa.root# cd /sys/bus/fmc/devices; ls -l */eeprom
- -r--r--r-- 1 root root 8192 Apr 9 16:53 FmcDelay1ns4cha-f001/eeprom
- -r--r--r-- 1 root root 8192 Apr 9 17:19 fake-design-for-testing-f002/eeprom
- -r--r--r-- 1 root root 8192 Apr 9 17:19 fake-design-for-testing-f003/eeprom
- -r--r--r-- 1 root root 8192 Apr 9 17:19 fmc-f004/eeprom
+The bus creates a sysfs binary file called eeprom for each mezzanine it
+knows about:
+
+ spusa.root# cd /sys/bus/fmc/devices; ls -l */eeprom
+ -r--r--r-- 1 root root 8192 Feb 21 12:30 FmcAdc100m14b4cha-0800/eeprom
+ -r--r--r-- 1 root root 8192 Feb 21 12:30 FmcDelay1ns4cha-0200/eeprom
+ -r--r--r-- 1 root root 8192 Feb 21 12:30 FmcDio5cha-0400/eeprom
+
+Everybody can read the files and the superuser can also modify it, but
+the operation may on the carrier driver, if the carrier is unable to
+access the I2C bus. For example, the spec driver can access the bus
+only with its golden gateware: after a mezzanine driver reprogrammed
+the FPGA with a custom circuit, the carrier is unable to access the
+EEPROM and returns ENOTSUPP.
+
+An alternative way to write the EEPROM is the mezzanine driver
+fmc-write-eeprom (See *note fmc-write-eeprom::), but the procedure is
+more complex.
diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490
index 28176def3d6f..3e091151dd80 100644
--- a/Documentation/w1/masters/ds2490
+++ b/Documentation/w1/masters/ds2490
@@ -21,8 +21,6 @@ Notes and limitations.
- The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA.
- The 5V strong pullup is supported with a minimum of 5.9mA and a
maximum of 30.4 mA. (From DS2490.pdf)
-- While the ds2490 supports a hardware search the code doesn't take
- advantage of it (in tested case it only returned first device).
- The hardware will detect when devices are attached to the bus on the
next bus (reset?) operation, however only a message is printed as
the core w1 code doesn't make use of the information. Connecting
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
index f59a31965d50..927a52cc0519 100644
--- a/Documentation/w1/w1.netlink
+++ b/Documentation/w1/w1.netlink
@@ -5,8 +5,8 @@ Message types.
=============
There are three types of messages between w1 core and userspace:
-1. Events. They are generated each time new master or slave device
- found either due to automatic or requested search.
+1. Events. They are generated each time a new master or slave device
+ is found either due to automatic or requested search.
2. Userspace commands.
3. Replies to userspace commands.
@@ -131,7 +131,7 @@ of the w1_netlink_cmd structure and cn_msg.len will be equal to the sum
of the sizeof(struct w1_netlink_msg) and sizeof(struct w1_netlink_cmd).
If reply is generated for master or root command (which do not have
w1_netlink_cmd attached), reply will contain only cn_msg and w1_netlink_msg
-structires.
+structures.
w1_netlink_msg.status field will carry positive error value
(EINVAL for example) or zero in case of success.
@@ -160,7 +160,7 @@ procedure is started to select given device.
Then all requested in w1_netlink_msg operations are performed one by one.
If command requires reply (like read command) it is sent on command completion.
-When all commands (w1_netlink_cmd) are processed muster device is unlocked
+When all commands (w1_netlink_cmd) are processed master device is unlocked
and next w1_netlink_msg header processing started.
diff --git a/MAINTAINERS b/MAINTAINERS
index c7ded020e64b..4a2ea1a168b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5696,6 +5696,12 @@ L: linux-watchdog@vger.kernel.org
S: Supported
F: drivers/watchdog/mena21_wdt.c
+MEN CHAMELEON BUS (mcb)
+M: Johannes Thumshirn <johannes.thumshirn@men.de>
+S: Supported
+F: drivers/mcb/
+F: include/linux/mcb.h
+
METAG ARCHITECTURE
M: James Hogan <james.hogan@imgtec.com>
L: linux-metag@vger.kernel.org
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 249b6e0ba737..7753be0c86d7 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -421,7 +421,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ddb25452d78e..ee17b1c379e3 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -378,7 +378,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index b373c74a9b3d..3490ef9ec603 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -341,7 +341,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/arch/avr32/boards/mimc200/Makefile b/arch/avr32/boards/mimc200/Makefile
index 79c076e168a8..c740aa116755 100644
--- a/arch/avr32/boards/mimc200/Makefile
+++ b/arch/avr32/boards/mimc200/Makefile
@@ -1 +1 @@
-obj-y += setup.o flash.o fram.o
+obj-y += setup.o flash.o
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
deleted file mode 100644
index c1466a872b9c..000000000000
--- a/arch/avr32/boards/mimc200/fram.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * FRAM driver for MIMC200 board
- *
- * Copyright 2008 Mark Jackson <mpfj@mimc.co.uk>
- *
- * This module adds *very* simply support for the system's FRAM device.
- * At the moment, this is hard-coded to the MIMC200 platform, and only
- * supports mmap().
- */
-
-#define FRAM_VERSION "1.0"
-
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#define FRAM_BASE 0xac000000
-#define FRAM_SIZE 0x20000
-
-/*
- * The are the file operation function for user access to /dev/fram
- */
-
-static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- int ret;
-
- ret = remap_pfn_range(vma,
- vma->vm_start,
- virt_to_phys((void *)((unsigned long)FRAM_BASE)) >> PAGE_SHIFT,
- vma->vm_end-vma->vm_start,
- PAGE_SHARED);
-
- if (ret != 0)
- return -EAGAIN;
-
- return 0;
-}
-
-static const struct file_operations fram_fops = {
- .owner = THIS_MODULE,
- .mmap = fram_mmap,
- .llseek = noop_llseek,
-};
-
-#define FRAM_MINOR 0
-
-static struct miscdevice fram_dev = {
- FRAM_MINOR,
- "fram",
- &fram_fops
-};
-
-static int __init
-fram_init(void)
-{
- int ret;
-
- ret = misc_register(&fram_dev);
- if (ret) {
- printk(KERN_ERR "fram: can't misc_register on minor=%d\n",
- FRAM_MINOR);
- return ret;
- }
- printk(KERN_INFO "FRAM memory driver v" FRAM_VERSION "\n");
- return 0;
-}
-
-static void __exit
-fram_cleanup_module(void)
-{
- misc_deregister(&fram_dev);
-}
-
-module_init(fram_init);
-module_exit(fram_cleanup_module);
-
-MODULE_LICENSE("GPL");
-
-MODULE_ALIAS_MISCDEV(FRAM_MINOR);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 957bf344c0f5..b9fcecc706ab 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -736,10 +736,6 @@ config FSL_LBC
controller. Also contains some common code used by
drivers for specific local bus peripherals.
-config FSL_IFC
- bool
- depends on FSL_SOC
-
config FSL_GTM
bool
depends on PPC_83xx || QUICC_ENGINE || CPM2
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index f67ac900d870..afbcc37aa094 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
-obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
diff --git a/drivers/Kconfig b/drivers/Kconfig
index b3138fbb46a4..0a0a90f52d26 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig"
source "drivers/spi/Kconfig"
+source "drivers/spmi/Kconfig"
+
source "drivers/hsi/Kconfig"
source "drivers/pps/Kconfig"
@@ -170,4 +172,6 @@ source "drivers/phy/Kconfig"
source "drivers/powercap/Kconfig"
+source "drivers/mcb/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e3b8b06c0b2..e3ced91b1784 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_SPMI) += spmi/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
@@ -155,3 +156,4 @@ obj-$(CONFIG_IPACK_BUS) += ipack/
obj-$(CONFIG_NTB) += ntb/
obj-$(CONFIG_FMC) += fmc/
obj-$(CONFIG_POWERCAP) += powercap/
+obj-$(CONFIG_MCB) += mcb/
diff --git a/drivers/base/regmap/regmap-spmi.c b/drivers/base/regmap/regmap-spmi.c
index ac2391013db1..d7026dc33388 100644
--- a/drivers/base/regmap/regmap-spmi.c
+++ b/drivers/base/regmap/regmap-spmi.c
@@ -22,69 +22,235 @@
#include <linux/module.h>
#include <linux/init.h>
-static int regmap_spmi_read(void *context,
- const void *reg, size_t reg_size,
- void *val, size_t val_size)
+static int regmap_spmi_base_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
{
+ u8 addr = *(u8 *)reg;
+ int err = 0;
+
+ BUG_ON(reg_size != 1);
+
+ while (val_size-- && !err)
+ err = spmi_register_read(context, addr++, val++);
+
+ return err;
+}
+
+static int regmap_spmi_base_gather_write(void *context,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ const u8 *data = val;
+ u8 addr = *(u8 *)reg;
+ int err = 0;
+
+ BUG_ON(reg_size != 1);
+
+ /*
+ * SPMI defines a more bandwidth-efficient 'Register 0 Write' sequence,
+ * use it when possible.
+ */
+ if (addr == 0 && val_size) {
+ err = spmi_register_zero_write(context, *data);
+ if (err)
+ goto err_out;
+
+ data++;
+ addr++;
+ val_size--;
+ }
+
+ while (val_size) {
+ err = spmi_register_write(context, addr, *data);
+ if (err)
+ goto err_out;
+
+ data++;
+ addr++;
+ val_size--;
+ }
+
+err_out:
+ return err;
+}
+
+static int regmap_spmi_base_write(void *context, const void *data,
+ size_t count)
+{
+ BUG_ON(count < 1);
+ return regmap_spmi_base_gather_write(context, data, 1, data + 1,
+ count - 1);
+}
+
+static struct regmap_bus regmap_spmi_base = {
+ .read = regmap_spmi_base_read,
+ .write = regmap_spmi_base_write,
+ .gather_write = regmap_spmi_base_gather_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+/**
+ * regmap_init_spmi_base(): Create regmap for the Base register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *regmap_init_spmi_base(struct spmi_device *sdev,
+ const struct regmap_config *config)
+{
+ return regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config);
+}
+EXPORT_SYMBOL_GPL(regmap_init_spmi_base);
+
+/**
+ * devm_regmap_init_spmi_base(): Create managed regmap for Base register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_spmi_base(struct spmi_device *sdev,
+ const struct regmap_config *config)
+{
+ return devm_regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_base);
+
+static int regmap_spmi_ext_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ int err = 0;
+ size_t len;
+ u16 addr;
+
BUG_ON(reg_size != 2);
- return spmi_ext_register_readl(context, *(u16 *)reg,
- val, val_size);
+
+ addr = *(u16 *)reg;
+
+ /*
+ * Split accesses into two to take advantage of the more
+ * bandwidth-efficient 'Extended Register Read' command when possible
+ */
+ while (addr <= 0xFF && val_size) {
+ len = min_t(size_t, val_size, 16);
+
+ err = spmi_ext_register_read(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+ while (val_size) {
+ len = min_t(size_t, val_size, 8);
+
+ err = spmi_ext_register_readl(context, addr, val, val_size);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+err_out:
+ return err;
}
-static int regmap_spmi_gather_write(void *context,
- const void *reg, size_t reg_size,
- const void *val, size_t val_size)
+static int regmap_spmi_ext_gather_write(void *context,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
{
+ int err = 0;
+ size_t len;
+ u16 addr;
+
BUG_ON(reg_size != 2);
- return spmi_ext_register_writel(context, *(u16 *)reg, val, val_size);
+
+ addr = *(u16 *)reg;
+
+ while (addr <= 0xFF && val_size) {
+ len = min_t(size_t, val_size, 16);
+
+ err = spmi_ext_register_write(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+ while (val_size) {
+ len = min_t(size_t, val_size, 8);
+
+ err = spmi_ext_register_writel(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+err_out:
+ return err;
}
-static int regmap_spmi_write(void *context, const void *data,
- size_t count)
+static int regmap_spmi_ext_write(void *context, const void *data,
+ size_t count)
{
BUG_ON(count < 2);
- return regmap_spmi_gather_write(context, data, 2, data + 2, count - 2);
+ return regmap_spmi_ext_gather_write(context, data, 2, data + 2,
+ count - 2);
}
-static struct regmap_bus regmap_spmi = {
- .read = regmap_spmi_read,
- .write = regmap_spmi_write,
- .gather_write = regmap_spmi_gather_write,
+static struct regmap_bus regmap_spmi_ext = {
+ .read = regmap_spmi_ext_read,
+ .write = regmap_spmi_ext_write,
+ .gather_write = regmap_spmi_ext_gather_write,
.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
};
/**
- * regmap_init_spmi(): Initialize register map
- *
- * @sdev: Device that will be interacted with
- * @config: Configuration for register map
+ * regmap_init_spmi_ext(): Create regmap for Ext register space
+ * @sdev: Device that will be interacted with
+ * @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer to
* a struct regmap.
*/
-struct regmap *regmap_init_spmi(struct spmi_device *sdev,
- const struct regmap_config *config)
+struct regmap *regmap_init_spmi_ext(struct spmi_device *sdev,
+ const struct regmap_config *config)
{
- return regmap_init(&sdev->dev, &regmap_spmi, sdev, config);
+ return regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config);
}
-EXPORT_SYMBOL_GPL(regmap_init_spmi);
+EXPORT_SYMBOL_GPL(regmap_init_spmi_ext);
/**
- * devm_regmap_init_spmi(): Initialise managed register map
- *
- * @sdev: Device that will be interacted with
- * @config: Configuration for register map
+ * devm_regmap_init_spmi_ext(): Create managed regmap for Ext register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer
* to a struct regmap. The regmap will be automatically freed by the
* device management code.
*/
-struct regmap *devm_regmap_init_spmi(struct spmi_device *sdev,
+struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *sdev,
const struct regmap_config *config)
{
- return devm_regmap_init(&sdev->dev, &regmap_spmi, sdev, config);
+ return devm_regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config);
}
-EXPORT_SYMBOL_GPL(devm_regmap_init_spmi);
+EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_ext);
MODULE_LICENSE("GPL");
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 1b192395a90c..8121b4c70ede 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -31,7 +31,6 @@
#include <linux/module.h>
#include <linux/mman.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/agp_backend.h>
#include <linux/agpgart.h>
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index f39437addb58..0fbccce1cee9 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -29,7 +29,6 @@
*/
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/miscdevice.h>
#include <linux/pm.h>
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 5c85350f4c3d..9a024f899dd4 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 05b8d0241bde..3051c73bc383 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index 43577ca780e3..8c3b255e629a 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -8,7 +8,6 @@
*/
#include <linux/hw_random.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index a0f7724852eb..b9495a8c05c6 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -37,7 +37,6 @@
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/sched.h>
-#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/char/hw_random/exynos-rng.c b/drivers/char/hw_random/exynos-rng.c
index 402ccfb625c5..9f8277cc44b4 100644
--- a/drivers/char/hw_random/exynos-rng.c
+++ b/drivers/char/hw_random/exynos-rng.c
@@ -22,7 +22,6 @@
#include <linux/hw_random.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index f9beed54d0c8..432232eefe05 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -7,7 +7,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/preempt.h>
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 232b87fb5fc9..00e9d2d46634 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/hw_random.h>
diff --git a/drivers/char/hw_random/octeon-rng.c b/drivers/char/hw_random/octeon-rng.c
index f2885dbe1849..b5cc3420c659 100644
--- a/drivers/char/hw_random/octeon-rng.c
+++ b/drivers/char/hw_random/octeon-rng.c
@@ -10,7 +10,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/hw_random.h>
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 03f41896d090..b7efd3c1a882 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -61,7 +61,6 @@
#include <linux/ipmi_smi.h>
#include <asm/io.h>
#include "ipmi_si_sm.h"
-#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/string.h>
#include <linux/ctype.h>
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 92c5937f80c3..917403fe10da 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -99,6 +99,9 @@ static ssize_t read_mem(struct file *file, char __user *buf,
ssize_t read, sz;
char *ptr;
+ if (p != *ppos)
+ return 0;
+
if (!valid_phys_addr_range(p, count))
return -EFAULT;
read = 0;
@@ -157,6 +160,9 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
unsigned long copied;
void *ptr;
+ if (p != *ppos)
+ return -EFBIG;
+
if (!valid_phys_addr_range(p, count))
return -EFAULT;
diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c
index 881c9e595939..28740046bc83 100644
--- a/drivers/char/mwave/3780i.c
+++ b/drivers/char/mwave/3780i.c
@@ -50,7 +50,6 @@
#include <linux/unistd.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/sched.h> /* cond_resched() */
diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c
index 0e506bad1986..bd377472dcfb 100644
--- a/drivers/char/tile-srom.c
+++ b/drivers/char/tile-srom.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/init.h>
#include <linux/kernel.h> /* printk() */
#include <linux/slab.h> /* kmalloc() */
#include <linux/fs.h> /* everything... */
diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c
index 52b9b2b2f300..472af4bb1b61 100644
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -21,7 +21,6 @@
*
*
*/
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/wait.h>
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
index 5b0dd8ef74c0..3b7bf2162898 100644
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -38,7 +38,6 @@
#include <linux/miscdevice.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/wait.h>
#include <linux/string.h>
#include <linux/interrupt.h>
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index 18c5b9b16645..148d707a1d43 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -95,7 +95,7 @@ void proc_fork_connector(struct task_struct *task)
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
/* If cn_netlink_send() failed, the data is not sent */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_exec_connector(struct task_struct *task)
@@ -122,7 +122,7 @@ void proc_exec_connector(struct task_struct *task)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_id_connector(struct task_struct *task, int which_id)
@@ -163,7 +163,7 @@ void proc_id_connector(struct task_struct *task, int which_id)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_sid_connector(struct task_struct *task)
@@ -190,7 +190,7 @@ void proc_sid_connector(struct task_struct *task)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
@@ -225,7 +225,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_comm_connector(struct task_struct *task)
@@ -253,7 +253,7 @@ void proc_comm_connector(struct task_struct *task)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_coredump_connector(struct task_struct *task)
@@ -280,7 +280,7 @@ void proc_coredump_connector(struct task_struct *task)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_exit_connector(struct task_struct *task)
@@ -309,7 +309,7 @@ void proc_exit_connector(struct task_struct *task)
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
/*
@@ -343,7 +343,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack)
msg->ack = rcvd_ack + 1;
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
/**
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index a36749f1e44a..77afe7487d34 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -50,7 +50,7 @@ static int cn_already_initialized;
*
* Sequence number is incremented with each message to be sent.
*
- * If we expect reply to our message then the sequence number in
+ * If we expect a reply to our message then the sequence number in
* received message MUST be the same as in original message, and
* acknowledge number MUST be the same + 1.
*
@@ -62,8 +62,11 @@ static int cn_already_initialized;
* the acknowledgement number in the original message + 1, then it is
* a new message.
*
+ * The message is sent to, the portid if given, the group if given, both if
+ * both, or if both are zero then the group is looked up and sent there.
*/
-int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
+int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group,
+ gfp_t gfp_mask)
{
struct cn_callback_entry *__cbq;
unsigned int size;
@@ -74,7 +77,9 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
u32 group = 0;
int found = 0;
- if (!__group) {
+ if (portid || __group) {
+ group = __group;
+ } else {
spin_lock_bh(&dev->cbdev->queue_lock);
list_for_each_entry(__cbq, &dev->cbdev->queue_list,
callback_entry) {
@@ -88,11 +93,9 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
if (!found)
return -ENODEV;
- } else {
- group = __group;
}
- if (!netlink_has_listeners(dev->nls, group))
+ if (!portid && !netlink_has_listeners(dev->nls, group))
return -ESRCH;
size = sizeof(*msg) + msg->len;
@@ -113,7 +116,10 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
NETLINK_CB(skb).dst_group = group;
- return netlink_broadcast(dev->nls, skb, 0, group, gfp_mask);
+ if (group)
+ return netlink_broadcast(dev->nls, skb, portid, group,
+ gfp_mask);
+ return netlink_unicast(dev->nls, skb, portid, !(gfp_mask&__GFP_WAIT));
}
EXPORT_SYMBOL_GPL(cn_netlink_send);
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index bdb5a00f1dfa..be56e8ac95e6 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -14,10 +14,6 @@ if EXTCON
comment "Extcon Device Drivers"
-config OF_EXTCON
- def_tristate y
- depends on OF
-
config EXTCON_GPIO
tristate "GPIO extcon support"
depends on GPIOLIB
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 43eccc0e3448..bf7861ec0906 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,8 +2,6 @@
# Makefile for external connector class (extcon) devices
#
-obj-$(CONFIG_OF_EXTCON) += of_extcon.o
-
obj-$(CONFIG_EXTCON) += extcon-class.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 76322330cbd7..7ab21aa6eaa1 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -31,6 +31,7 @@
#include <linux/extcon.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
+#include <linux/of.h>
/*
* extcon_cable_name suggests the standard cable names for commonly used
@@ -818,6 +819,47 @@ void extcon_dev_unregister(struct extcon_dev *edev)
}
EXPORT_SYMBOL_GPL(extcon_dev_unregister);
+#ifdef CONFIG_OF
+/*
+ * extcon_get_edev_by_phandle - Get the extcon device from devicetree
+ * @dev - instance to the given device
+ * @index - index into list of extcon_dev
+ *
+ * return the instance of extcon device
+ */
+struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
+{
+ struct device_node *node;
+ struct extcon_dev *edev;
+
+ if (!dev->of_node) {
+ dev_err(dev, "device does not have a device node entry\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ node = of_parse_phandle(dev->of_node, "extcon", index);
+ if (!node) {
+ dev_err(dev, "failed to get phandle in %s node\n",
+ dev->of_node->full_name);
+ return ERR_PTR(-ENODEV);
+ }
+
+ edev = extcon_get_extcon_dev(node->name);
+ if (!edev) {
+ dev_err(dev, "unable to get extcon device : %s\n", node->name);
+ return ERR_PTR(-ENODEV);
+ }
+
+ return edev;
+}
+#else
+struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
+
static int __init extcon_class_init(void)
{
return create_extcon_class();
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index a63a6b21c9ad..13d522255d81 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -176,9 +176,7 @@ static int gpio_extcon_resume(struct device *dev)
}
#endif
-static const struct dev_pm_ops gpio_extcon_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(NULL, gpio_extcon_resume)
-};
+static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 2aea4bcdd7f3..ddff2b72f0a8 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -271,10 +271,7 @@ static int palmas_usb_resume(struct device *dev)
};
#endif
-static const struct dev_pm_ops palmas_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(palmas_usb_suspend,
- palmas_usb_resume)
-};
+static SIMPLE_DEV_PM_OPS(palmas_pm_ops, palmas_usb_suspend, palmas_usb_resume);
static struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas-usb", },
diff --git a/drivers/extcon/of_extcon.c b/drivers/extcon/of_extcon.c
deleted file mode 100644
index 72173ecbb311..000000000000
--- a/drivers/extcon/of_extcon.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * OF helpers for External connector (extcon) framework
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * Kishon Vijay Abraham I <kishon@ti.com>
- *
- * Copyright (C) 2013 Samsung Electronics
- * Chanwoo Choi <cw00.choi@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/extcon.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/extcon/of_extcon.h>
-
-/*
- * of_extcon_get_extcon_dev - Get the name of extcon device from devicetree
- * @dev - instance to the given device
- * @index - index into list of extcon_dev
- *
- * return the instance of extcon device
- */
-struct extcon_dev *of_extcon_get_extcon_dev(struct device *dev, int index)
-{
- struct device_node *node;
- struct extcon_dev *edev;
- struct platform_device *extcon_parent_dev;
-
- if (!dev->of_node) {
- dev_dbg(dev, "device does not have a device node entry\n");
- return ERR_PTR(-EINVAL);
- }
-
- node = of_parse_phandle(dev->of_node, "extcon", index);
- if (!node) {
- dev_dbg(dev, "failed to get phandle in %s node\n",
- dev->of_node->full_name);
- return ERR_PTR(-ENODEV);
- }
-
- extcon_parent_dev = of_find_device_by_node(node);
- if (!extcon_parent_dev) {
- dev_dbg(dev, "unable to find device by node\n");
- return ERR_PTR(-EPROBE_DEFER);
- }
-
- edev = extcon_get_extcon_dev(dev_name(&extcon_parent_dev->dev));
- if (!edev) {
- dev_dbg(dev, "unable to get extcon device : %s\n",
- dev_name(&extcon_parent_dev->dev));
- return ERR_PTR(-ENODEV);
- }
-
- return edev;
-}
-EXPORT_SYMBOL_GPL(of_extcon_get_extcon_dev);
diff --git a/drivers/fmc/fmc-core.c b/drivers/fmc/fmc-core.c
index 24d52497524d..353fc546fb08 100644
--- a/drivers/fmc/fmc-core.c
+++ b/drivers/fmc/fmc-core.c
@@ -99,10 +99,23 @@ static ssize_t fmc_read_eeprom(struct file *file, struct kobject *kobj,
return count;
}
+static ssize_t fmc_write_eeprom(struct file *file, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct fmc_device *fmc;
+
+ dev = container_of(kobj, struct device, kobj);
+ fmc = container_of(dev, struct fmc_device, dev);
+ return fmc->op->write_ee(fmc, off, buf, count);
+}
+
static struct bin_attribute fmc_eeprom_attr = {
- .attr = { .name = "eeprom", .mode = S_IRUGO, },
+ .attr = { .name = "eeprom", .mode = S_IRUGO | S_IWUSR, },
.size = 8192, /* more or less standard */
.read = fmc_read_eeprom,
+ .write = fmc_write_eeprom,
};
/*
@@ -154,7 +167,7 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
ret = -EINVAL;
break;
}
- if (fmc->flags == FMC_DEVICE_NO_MEZZANINE) {
+ if (fmc->flags & FMC_DEVICE_NO_MEZZANINE) {
dev_info(fmc->hwdev, "absent mezzanine in slot %d\n",
fmc->slot_id);
continue;
@@ -189,9 +202,6 @@ int fmc_device_register_n(struct fmc_device **devs, int n)
for (i = 0; i < n; i++) {
fmc = devarray[i];
- if (fmc->flags == FMC_DEVICE_NO_MEZZANINE)
- continue; /* dev_info already done above */
-
fmc->nr_slots = n; /* each slot must know how many are there */
fmc->devarray = devarray;
@@ -263,8 +273,6 @@ void fmc_device_unregister_n(struct fmc_device **devs, int n)
kfree(devs[0]->devarray);
for (i = 0; i < n; i++) {
- if (devs[i]->flags == FMC_DEVICE_NO_MEZZANINE)
- continue;
sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
device_del(&devs[i]->dev);
fmc_free_id_info(devs[i]);
diff --git a/drivers/fmc/fmc-sdb.c b/drivers/fmc/fmc-sdb.c
index 79adc39221ea..4603fdb74465 100644
--- a/drivers/fmc/fmc-sdb.c
+++ b/drivers/fmc/fmc-sdb.c
@@ -150,23 +150,36 @@ int fmc_reprogram(struct fmc_device *fmc, struct fmc_driver *d, char *gw,
}
EXPORT_SYMBOL(fmc_reprogram);
+static char *__strip_trailing_space(char *buf, char *str, int len)
+{
+ int i = len - 1;
+
+ memcpy(buf, str, len);
+ while(i >= 0 && buf[i] == ' ')
+ buf[i--] = '\0';
+ return buf;
+}
+
+#define __sdb_string(buf, field) ({ \
+ BUILD_BUG_ON(sizeof(buf) < sizeof(field)); \
+ __strip_trailing_space(buf, (void *)(field), sizeof(field)); \
+ })
+
static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
const struct sdb_array *arr)
{
+ unsigned long base = arr->baseaddr;
int i, j, n = arr->len, level = arr->level;
- const struct sdb_array *ap;
+ char buf[64];
for (i = 0; i < n; i++) {
- unsigned long base;
union sdb_record *r;
struct sdb_product *p;
struct sdb_component *c;
r = &arr->record[i];
c = &r->dev.sdb_component;
p = &c->product;
- base = 0;
- for (ap = arr; ap; ap = ap->parent)
- base += ap->baseaddr;
+
dev_info(&fmc->dev, "SDB: ");
for (j = 0; j < level; j++)
@@ -193,8 +206,8 @@ static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
p->name,
__be64_to_cpu(c->addr_first) + base);
if (IS_ERR(arr->subtree[i])) {
- printk(KERN_CONT "(bridge error %li)\n",
- PTR_ERR(arr->subtree[i]));
+ dev_info(&fmc->dev, "SDB: (bridge error %li)\n",
+ PTR_ERR(arr->subtree[i]));
break;
}
__fmc_show_sdb_tree(fmc, arr->subtree[i]);
@@ -203,10 +216,20 @@ static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
printk(KERN_CONT "integration\n");
break;
case sdb_type_repo_url:
- printk(KERN_CONT "repo-url\n");
+ printk(KERN_CONT "Synthesis repository: %s\n",
+ __sdb_string(buf, r->repo_url.repo_url));
break;
case sdb_type_synthesis:
- printk(KERN_CONT "synthesis-info\n");
+ printk(KERN_CONT "Bitstream '%s' ",
+ __sdb_string(buf, r->synthesis.syn_name));
+ printk(KERN_CONT "synthesized %08x by %s ",
+ __be32_to_cpu(r->synthesis.date),
+ __sdb_string(buf, r->synthesis.user_name));
+ printk(KERN_CONT "(%s version %x), ",
+ __sdb_string(buf, r->synthesis.tool_name),
+ __be32_to_cpu(r->synthesis.tool_version));
+ printk(KERN_CONT "commit %pm\n",
+ r->synthesis.commit_id);
break;
case sdb_type_empty:
printk(KERN_CONT "empty\n");
diff --git a/drivers/hv/Makefile b/drivers/hv/Makefile
index 0a74b5661186..5e4dfa4cfe22 100644
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@@ -5,4 +5,4 @@ obj-$(CONFIG_HYPERV_BALLOON) += hv_balloon.o
hv_vmbus-y := vmbus_drv.o \
hv.o connection.o channel.o \
channel_mgmt.o ring_buffer.o
-hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o
+hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o hv_fcopy.o
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 69ea36f07b4d..602ca86a6488 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/hyperv.h>
+#include <linux/uio.h>
#include "hyperv_vmbus.h"
@@ -554,14 +555,14 @@ EXPORT_SYMBOL_GPL(vmbus_close);
*
* Mainly used by Hyper-V drivers.
*/
-int vmbus_sendpacket(struct vmbus_channel *channel, const void *buffer,
+int vmbus_sendpacket(struct vmbus_channel *channel, void *buffer,
u32 bufferlen, u64 requestid,
enum vmbus_packet_type type, u32 flags)
{
struct vmpacket_descriptor desc;
u32 packetlen = sizeof(struct vmpacket_descriptor) + bufferlen;
u32 packetlen_aligned = ALIGN(packetlen, sizeof(u64));
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
int ret;
bool signal = false;
@@ -575,11 +576,12 @@ int vmbus_sendpacket(struct vmbus_channel *channel, const void *buffer,
desc.len8 = (u16)(packetlen_aligned >> 3);
desc.trans_id = requestid;
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, sizeof(struct vmpacket_descriptor));
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = sizeof(struct vmpacket_descriptor);
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
@@ -605,7 +607,7 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
u32 descsize;
u32 packetlen;
u32 packetlen_aligned;
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
bool signal = false;
@@ -637,11 +639,12 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
desc.range[i].pfn = pagebuffers[i].pfn;
}
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, descsize);
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = descsize;
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
@@ -665,7 +668,7 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
u32 descsize;
u32 packetlen;
u32 packetlen_aligned;
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
bool signal = false;
u32 pfncount = NUM_PAGES_SPANNED(multi_pagebuffer->offset,
@@ -700,11 +703,12 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
memcpy(desc.range.pfn_array, multi_pagebuffer->pfn_array,
pfncount * sizeof(u64));
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, descsize);
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = descsize;
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index 7e17a5495e02..7e6d78dc9437 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -1171,7 +1171,8 @@ static int dm_thread_func(void *dm_dev)
int t;
while (!kthread_should_stop()) {
- t = wait_for_completion_timeout(&dm_device.config_event, 1*HZ);
+ t = wait_for_completion_interruptible_timeout(
+ &dm_device.config_event, 1*HZ);
/*
* The host expects us to post information on the memory
* pressure every second.
diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c
new file mode 100644
index 000000000000..eaaa3d843b80
--- /dev/null
+++ b/drivers/hv/hv_fcopy.c
@@ -0,0 +1,414 @@
+/*
+ * An implementation of file copy service.
+ *
+ * Copyright (C) 2014, Microsoft, Inc.
+ *
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/semaphore.h>
+#include <linux/fs.h>
+#include <linux/nls.h>
+#include <linux/workqueue.h>
+#include <linux/cdev.h>
+#include <linux/hyperv.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+
+#include "hyperv_vmbus.h"
+
+#define WIN8_SRV_MAJOR 1
+#define WIN8_SRV_MINOR 1
+#define WIN8_SRV_VERSION (WIN8_SRV_MAJOR << 16 | WIN8_SRV_MINOR)
+
+/*
+ * Global state maintained for transaction that is being processed.
+ * For a class of integration services, including the "file copy service",
+ * the specified protocol is a "request/response" protocol which means that
+ * there can only be single outstanding transaction from the host at any
+ * given point in time. We use this to simplify memory management in this
+ * driver - we cache and process only one message at a time.
+ *
+ * While the request/response protocol is guaranteed by the host, we further
+ * ensure this by serializing packet processing in this driver - we do not
+ * read additional packets from the VMBUs until the current packet is fully
+ * handled.
+ *
+ * The transaction "active" state is set when we receive a request from the
+ * host and we cleanup this state when the transaction is completed - when we
+ * respond to the host with our response. When the transaction active state is
+ * set, we defer handling incoming packets.
+ */
+
+static struct {
+ bool active; /* transaction status - active or not */
+ int recv_len; /* number of bytes received. */
+ struct hv_fcopy_hdr *fcopy_msg; /* current message */
+ struct hv_start_fcopy message; /* sent to daemon */
+ struct vmbus_channel *recv_channel; /* chn we got the request */
+ u64 recv_req_id; /* request ID. */
+ void *fcopy_context; /* for the channel callback */
+ struct semaphore read_sema;
+} fcopy_transaction;
+
+static bool opened; /* currently device opened */
+
+/*
+ * Before we can accept copy messages from the host, we need
+ * to handshake with the user level daemon. This state tracks
+ * if we are in the handshake phase.
+ */
+static bool in_hand_shake = true;
+static void fcopy_send_data(void);
+static void fcopy_respond_to_host(int error);
+static void fcopy_work_func(struct work_struct *dummy);
+static DECLARE_DELAYED_WORK(fcopy_work, fcopy_work_func);
+static u8 *recv_buffer;
+
+static void fcopy_work_func(struct work_struct *dummy)
+{
+ /*
+ * If the timer fires, the user-mode component has not responded;
+ * process the pending transaction.
+ */
+ fcopy_respond_to_host(HV_E_FAIL);
+}
+
+static int fcopy_handle_handshake(u32 version)
+{
+ switch (version) {
+ case FCOPY_CURRENT_VERSION:
+ break;
+ default:
+ /*
+ * For now we will fail the registration.
+ * If and when we have multiple versions to
+ * deal with, we will be backward compatible.
+ * We will add this code when needed.
+ */
+ return -EINVAL;
+ }
+ pr_info("FCP: user-mode registering done. Daemon version: %d\n",
+ version);
+ fcopy_transaction.active = false;
+ if (fcopy_transaction.fcopy_context)
+ hv_fcopy_onchannelcallback(fcopy_transaction.fcopy_context);
+ in_hand_shake = false;
+ return 0;
+}
+
+static void fcopy_send_data(void)
+{
+ struct hv_start_fcopy *smsg_out = &fcopy_transaction.message;
+ int operation = fcopy_transaction.fcopy_msg->operation;
+ struct hv_start_fcopy *smsg_in;
+
+ /*
+ * The strings sent from the host are encoded in
+ * in utf16; convert it to utf8 strings.
+ * The host assures us that the utf16 strings will not exceed
+ * the max lengths specified. We will however, reserve room
+ * for the string terminating character - in the utf16s_utf8s()
+ * function we limit the size of the buffer where the converted
+ * string is placed to W_MAX_PATH -1 to guarantee
+ * that the strings can be properly terminated!
+ */
+
+ switch (operation) {
+ case START_FILE_COPY:
+ memset(smsg_out, 0, sizeof(struct hv_start_fcopy));
+ smsg_out->hdr.operation = operation;
+ smsg_in = (struct hv_start_fcopy *)fcopy_transaction.fcopy_msg;
+
+ utf16s_to_utf8s((wchar_t *)smsg_in->file_name, W_MAX_PATH,
+ UTF16_LITTLE_ENDIAN,
+ (__u8 *)smsg_out->file_name, W_MAX_PATH - 1);
+
+ utf16s_to_utf8s((wchar_t *)smsg_in->path_name, W_MAX_PATH,
+ UTF16_LITTLE_ENDIAN,
+ (__u8 *)smsg_out->path_name, W_MAX_PATH - 1);
+
+ smsg_out->copy_flags = smsg_in->copy_flags;
+ smsg_out->file_size = smsg_in->file_size;
+ break;
+
+ default:
+ break;
+ }
+ up(&fcopy_transaction.read_sema);
+ return;
+}
+
+/*
+ * Send a response back to the host.
+ */
+
+static void
+fcopy_respond_to_host(int error)
+{
+ struct icmsg_hdr *icmsghdr;
+ u32 buf_len;
+ struct vmbus_channel *channel;
+ u64 req_id;
+
+ /*
+ * Copy the global state for completing the transaction. Note that
+ * only one transaction can be active at a time. This is guaranteed
+ * by the file copy protocol implemented by the host. Furthermore,
+ * the "transaction active" state we maintain ensures that there can
+ * only be one active transaction at a time.
+ */
+
+ buf_len = fcopy_transaction.recv_len;
+ channel = fcopy_transaction.recv_channel;
+ req_id = fcopy_transaction.recv_req_id;
+
+ fcopy_transaction.active = false;
+
+ icmsghdr = (struct icmsg_hdr *)
+ &recv_buffer[sizeof(struct vmbuspipe_hdr)];
+
+ if (channel->onchannel_callback == NULL)
+ /*
+ * We have raced with util driver being unloaded;
+ * silently return.
+ */
+ return;
+
+ icmsghdr->status = error;
+ icmsghdr->icflags = ICMSGHDRFLAG_TRANSACTION | ICMSGHDRFLAG_RESPONSE;
+ vmbus_sendpacket(channel, recv_buffer, buf_len, req_id,
+ VM_PKT_DATA_INBAND, 0);
+}
+
+void hv_fcopy_onchannelcallback(void *context)
+{
+ struct vmbus_channel *channel = context;
+ u32 recvlen;
+ u64 requestid;
+ struct hv_fcopy_hdr *fcopy_msg;
+ struct icmsg_hdr *icmsghdr;
+ struct icmsg_negotiate *negop = NULL;
+ int util_fw_version;
+ int fcopy_srv_version;
+
+ if (fcopy_transaction.active) {
+ /*
+ * We will defer processing this callback once
+ * the current transaction is complete.
+ */
+ fcopy_transaction.fcopy_context = context;
+ return;
+ }
+
+ vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 2, &recvlen,
+ &requestid);
+ if (recvlen <= 0)
+ return;
+
+ icmsghdr = (struct icmsg_hdr *)&recv_buffer[
+ sizeof(struct vmbuspipe_hdr)];
+ if (icmsghdr->icmsgtype == ICMSGTYPE_NEGOTIATE) {
+ util_fw_version = UTIL_FW_VERSION;
+ fcopy_srv_version = WIN8_SRV_VERSION;
+ vmbus_prep_negotiate_resp(icmsghdr, negop, recv_buffer,
+ util_fw_version, fcopy_srv_version);
+ } else {
+ fcopy_msg = (struct hv_fcopy_hdr *)&recv_buffer[
+ sizeof(struct vmbuspipe_hdr) +
+ sizeof(struct icmsg_hdr)];
+
+ /*
+ * Stash away this global state for completing the
+ * transaction; note transactions are serialized.
+ */
+
+ fcopy_transaction.active = true;
+ fcopy_transaction.recv_len = recvlen;
+ fcopy_transaction.recv_channel = channel;
+ fcopy_transaction.recv_req_id = requestid;
+ fcopy_transaction.fcopy_msg = fcopy_msg;
+
+ /*
+ * Send the information to the user-level daemon.
+ */
+ fcopy_send_data();
+ schedule_delayed_work(&fcopy_work, 5*HZ);
+ return;
+ }
+ icmsghdr->icflags = ICMSGHDRFLAG_TRANSACTION | ICMSGHDRFLAG_RESPONSE;
+ vmbus_sendpacket(channel, recv_buffer, recvlen, requestid,
+ VM_PKT_DATA_INBAND, 0);
+}
+
+/*
+ * Create a char device that can support read/write for passing
+ * the payload.
+ */
+
+static ssize_t fcopy_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ void *src;
+ size_t copy_size;
+ int operation;
+
+ /*
+ * Wait until there is something to be read.
+ */
+ if (down_interruptible(&fcopy_transaction.read_sema))
+ return -EINTR;
+
+ /*
+ * The channel may be rescinded and in this case, we will wakeup the
+ * the thread blocked on the semaphore and we will use the opened
+ * state to correctly handle this case.
+ */
+ if (!opened)
+ return -ENODEV;
+
+ operation = fcopy_transaction.fcopy_msg->operation;
+
+ if (operation == START_FILE_COPY) {
+ src = &fcopy_transaction.message;
+ copy_size = sizeof(struct hv_start_fcopy);
+ if (count < copy_size)
+ return 0;
+ } else {
+ src = fcopy_transaction.fcopy_msg;
+ copy_size = sizeof(struct hv_do_fcopy);
+ if (count < copy_size)
+ return 0;
+ }
+ if (copy_to_user(buf, src, copy_size))
+ return -EFAULT;
+
+ return copy_size;
+}
+
+static ssize_t fcopy_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int response = 0;
+
+ if (count != sizeof(int))
+ return -EINVAL;
+
+ if (copy_from_user(&response, buf, sizeof(int)))
+ return -EFAULT;
+
+ if (in_hand_shake) {
+ if (fcopy_handle_handshake(response))
+ return -EINVAL;
+ return sizeof(int);
+ }
+
+ /*
+ * Complete the transaction by forwarding the result
+ * to the host. But first, cancel the timeout.
+ */
+ if (cancel_delayed_work_sync(&fcopy_work))
+ fcopy_respond_to_host(response);
+
+ return sizeof(int);
+}
+
+static int fcopy_open(struct inode *inode, struct file *f)
+{
+ /*
+ * The user level daemon that will open this device is
+ * really an extension of this driver. We can have only
+ * active open at a time.
+ */
+ if (opened)
+ return -EBUSY;
+
+ /*
+ * The daemon is alive; setup the state.
+ */
+ opened = true;
+ return 0;
+}
+
+static int fcopy_release(struct inode *inode, struct file *f)
+{
+ /*
+ * The daemon has exited; reset the state.
+ */
+ in_hand_shake = true;
+ opened = false;
+ return 0;
+}
+
+
+static const struct file_operations fcopy_fops = {
+ .read = fcopy_read,
+ .write = fcopy_write,
+ .release = fcopy_release,
+ .open = fcopy_open,
+};
+
+static struct miscdevice fcopy_misc = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "vmbus/hv_fcopy",
+ .fops = &fcopy_fops,
+};
+
+static int fcopy_dev_init(void)
+{
+ return misc_register(&fcopy_misc);
+}
+
+static void fcopy_dev_deinit(void)
+{
+
+ /*
+ * The device is going away - perhaps because the
+ * host has rescinded the channel. Setup state so that
+ * user level daemon can gracefully exit if it is blocked
+ * on the read semaphore.
+ */
+ opened = false;
+ /*
+ * Signal the semaphore as the device is
+ * going away.
+ */
+ up(&fcopy_transaction.read_sema);
+ misc_deregister(&fcopy_misc);
+}
+
+int hv_fcopy_init(struct hv_util_service *srv)
+{
+ recv_buffer = srv->recv_buffer;
+
+ /*
+ * When this driver loads, the user level daemon that
+ * processes the host requests may not yet be running.
+ * Defer processing channel callbacks until the daemon
+ * has registered.
+ */
+ fcopy_transaction.active = true;
+ sema_init(&fcopy_transaction.read_sema, 0);
+
+ return fcopy_dev_init();
+}
+
+void hv_fcopy_deinit(void)
+{
+ cancel_delayed_work_sync(&fcopy_work);
+ fcopy_dev_deinit();
+}
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 09988b289622..ea852537307e 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -113,7 +113,7 @@ kvp_register(int reg_value)
kvp_msg->kvp_hdr.operation = reg_value;
strcpy(version, HV_DRV_VERSION);
msg->len = sizeof(struct hv_kvp_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
}
}
@@ -435,7 +435,7 @@ kvp_send_key(struct work_struct *dummy)
}
msg->len = sizeof(struct hv_kvp_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
return;
diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c
index 0c3546224376..34f14fddb666 100644
--- a/drivers/hv/hv_snapshot.c
+++ b/drivers/hv/hv_snapshot.c
@@ -98,7 +98,7 @@ static void vss_send_op(struct work_struct *dummy)
vss_msg->vss_hdr.operation = op;
msg->len = sizeof(struct hv_vss_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
return;
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index 62dfd246b948..dd761806f0e8 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -28,6 +28,7 @@
#include <linux/reboot.h>
#include <linux/hyperv.h>
+#include "hyperv_vmbus.h"
#define SD_MAJOR 3
#define SD_MINOR 0
@@ -82,6 +83,12 @@ static struct hv_util_service util_vss = {
.util_deinit = hv_vss_deinit,
};
+static struct hv_util_service util_fcopy = {
+ .util_cb = hv_fcopy_onchannelcallback,
+ .util_init = hv_fcopy_init,
+ .util_deinit = hv_fcopy_deinit,
+};
+
static void perform_shutdown(struct work_struct *dummy)
{
orderly_poweroff(true);
@@ -401,6 +408,10 @@ static const struct hv_vmbus_device_id id_table[] = {
{ HV_VSS_GUID,
.driver_data = (unsigned long)&util_vss
},
+ /* File copy GUID */
+ { HV_FCOPY_GUID,
+ .driver_data = (unsigned long)&util_fcopy
+ },
{ },
};
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index e05517616a06..860134da8039 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -559,8 +559,8 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info, void *buffer,
void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info);
int hv_ringbuffer_write(struct hv_ring_buffer_info *ring_info,
- struct scatterlist *sglist,
- u32 sgcount, bool *signal);
+ struct kvec *kv_list,
+ u32 kv_count, bool *signal);
int hv_ringbuffer_peek(struct hv_ring_buffer_info *ring_info, void *buffer,
u32 buflen);
@@ -669,5 +669,9 @@ int vmbus_set_event(struct vmbus_channel *channel);
void vmbus_on_event(unsigned long data);
+int hv_fcopy_init(struct hv_util_service *);
+void hv_fcopy_deinit(void);
+void hv_fcopy_onchannelcallback(void *);
+
#endif /* _HYPERV_VMBUS_H */
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 26c93cf9f6be..15db66b74141 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/hyperv.h>
+#include <linux/uio.h>
#include "hyperv_vmbus.h"
@@ -387,23 +388,20 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
*
*/
int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
- struct scatterlist *sglist, u32 sgcount, bool *signal)
+ struct kvec *kv_list, u32 kv_count, bool *signal)
{
int i = 0;
u32 bytes_avail_towrite;
u32 bytes_avail_toread;
u32 totalbytes_towrite = 0;
- struct scatterlist *sg;
u32 next_write_location;
u32 old_write;
u64 prev_indices = 0;
unsigned long flags;
- for_each_sg(sglist, sg, sgcount, i)
- {
- totalbytes_towrite += sg->length;
- }
+ for (i = 0; i < kv_count; i++)
+ totalbytes_towrite += kv_list[i].iov_len;
totalbytes_towrite += sizeof(u64);
@@ -427,12 +425,11 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
old_write = next_write_location;
- for_each_sg(sglist, sg, sgcount, i)
- {
+ for (i = 0; i < kv_count; i++) {
next_write_location = hv_copyto_ringbuffer(outring_info,
next_write_location,
- sg_virt(sg),
- sg->length);
+ kv_list[i].iov_base,
+ kv_list[i].iov_len);
}
/* Set previous packet start */
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 3f0a95290e14..8e53a3c2607e 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -43,6 +43,12 @@ static struct tasklet_struct msg_dpc;
static struct completion probe_event;
static int irq;
+struct resource hyperv_mmio = {
+ .name = "hyperv mmio",
+ .flags = IORESOURCE_MEM,
+};
+EXPORT_SYMBOL_GPL(hyperv_mmio);
+
static int vmbus_exists(void)
{
if (hv_acpi_dev == NULL)
@@ -843,18 +849,21 @@ void vmbus_device_unregister(struct hv_device *device_obj)
/*
- * VMBUS is an acpi enumerated device. Get the the IRQ information
- * from DSDT.
+ * VMBUS is an acpi enumerated device. Get the the information we
+ * need from DSDT.
*/
-static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *irq)
+static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
{
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ irq = res->data.irq.interrupts[0];
+ break;
- if (res->type == ACPI_RESOURCE_TYPE_IRQ) {
- struct acpi_resource_irq *irqp;
- irqp = &res->data.irq;
-
- *((unsigned int *)irq) = irqp->interrupts[0];
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ hyperv_mmio.start = res->data.address64.minimum;
+ hyperv_mmio.end = res->data.address64.maximum;
+ break;
}
return AE_OK;
@@ -863,18 +872,34 @@ static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *irq)
static int vmbus_acpi_add(struct acpi_device *device)
{
acpi_status result;
+ int ret_val = -ENODEV;
hv_acpi_dev = device;
result = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
- vmbus_walk_resources, &irq);
+ vmbus_walk_resources, NULL);
- if (ACPI_FAILURE(result)) {
- complete(&probe_event);
- return -ENODEV;
+ if (ACPI_FAILURE(result))
+ goto acpi_walk_err;
+ /*
+ * The parent of the vmbus acpi device (Gen2 firmware) is the VMOD that
+ * has the mmio ranges. Get that.
+ */
+ if (device->parent) {
+ result = acpi_walk_resources(device->parent->handle,
+ METHOD_NAME__CRS,
+ vmbus_walk_resources, NULL);
+
+ if (ACPI_FAILURE(result))
+ goto acpi_walk_err;
+ if (hyperv_mmio.start && hyperv_mmio.end)
+ request_resource(&iomem_resource, &hyperv_mmio);
}
+ ret_val = 0;
+
+acpi_walk_err:
complete(&probe_event);
- return 0;
+ return ret_val;
}
static const struct acpi_device_id vmbus_acpi_device_ids[] = {
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2209f28441e9..5c63f0918d12 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -155,6 +155,16 @@ config MCP3422
This driver can also be built as a module. If so, the module will be
called mcp3422.
+config MEN_Z188_ADC
+ tristate "MEN 16z188 ADC IP Core support"
+ depends on MCB
+ help
+ Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
+ carrier.
+
+ This driver can also be built as a module. If so, the module will be
+ called men_z188_adc.
+
config NAU7802
tristate "Nuvoton NAU7802 ADC driver"
depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ba9a10a24cd0..85a4a045f1f0 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1363) += max1363.o
obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
+obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c
new file mode 100644
index 000000000000..6989c16aec2b
--- /dev/null
+++ b/drivers/iio/adc/men_z188_adc.c
@@ -0,0 +1,172 @@
+/*
+ * MEN 16z188 Analog to Digial Converter
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mcb.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+
+#define Z188_ADC_MAX_CHAN 8
+#define Z188_ADC_GAIN 0x0700000
+#define Z188_MODE_VOLTAGE BIT(27)
+#define Z188_CFG_AUTO 0x1
+#define Z188_CTRL_REG 0x40
+
+#define ADC_DATA(x) (((x) >> 2) & 0x7ffffc)
+#define ADC_OVR(x) ((x) & 0x1)
+
+struct z188_adc {
+ struct resource *mem;
+ void __iomem *base;
+};
+
+#define Z188_ADC_CHANNEL(idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+}
+
+static const struct iio_chan_spec z188_adc_iio_channels[] = {
+ Z188_ADC_CHANNEL(0),
+ Z188_ADC_CHANNEL(1),
+ Z188_ADC_CHANNEL(2),
+ Z188_ADC_CHANNEL(3),
+ Z188_ADC_CHANNEL(4),
+ Z188_ADC_CHANNEL(5),
+ Z188_ADC_CHANNEL(6),
+ Z188_ADC_CHANNEL(7),
+};
+
+static int z188_iio_read_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long info)
+{
+ struct z188_adc *adc = iio_priv(iio_dev);
+ int ret;
+ u16 tmp;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ tmp = readw(adc->base + chan->channel * 4);
+
+ if (ADC_OVR(tmp)) {
+ dev_info(&iio_dev->dev,
+ "Oversampling error on ADC channel %d\n",
+ chan->channel);
+ return -EIO;
+ }
+ *val = ADC_DATA(tmp);
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static struct iio_info z188_adc_info = {
+ .read_raw = &z188_iio_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static void men_z188_config_channels(void __iomem *addr)
+{
+ int i;
+ u32 cfg;
+ u32 ctl;
+
+ ctl = readl(addr + Z188_CTRL_REG);
+ ctl |= Z188_CFG_AUTO;
+ writel(ctl, addr + Z188_CTRL_REG);
+
+ for (i = 0; i < Z188_ADC_MAX_CHAN; i++) {
+ cfg = readl(addr + i);
+ cfg &= ~Z188_ADC_GAIN;
+ cfg |= Z188_MODE_VOLTAGE;
+ writel(cfg, addr + i);
+ }
+}
+
+static int men_z188_probe(struct mcb_device *dev,
+ const struct mcb_device_id *id)
+{
+ struct z188_adc *adc;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+
+ indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(indio_dev);
+ indio_dev->name = "z188-adc";
+ indio_dev->dev.parent = &dev->dev;
+ indio_dev->info = &z188_adc_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = z188_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(z188_adc_iio_channels);
+
+ mem = mcb_request_mem(dev, "z188-adc");
+ if (!mem)
+ return -ENOMEM;
+
+ adc->base = ioremap(mem->start, resource_size(mem));
+ if (adc->base == NULL)
+ goto err;
+
+ men_z188_config_channels(adc->base);
+
+ adc->mem = mem;
+ mcb_set_drvdata(dev, indio_dev);
+
+ return iio_device_register(indio_dev);
+
+err:
+ mcb_release_mem(mem);
+ return -ENXIO;
+}
+
+static void men_z188_remove(struct mcb_device *dev)
+{
+ struct iio_dev *indio_dev = mcb_get_drvdata(dev);
+ struct z188_adc *adc = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iounmap(adc->base);
+ mcb_release_mem(adc->mem);
+}
+
+static const struct mcb_device_id men_z188_ids[] = {
+ { .device = 0xbc },
+};
+MODULE_DEVICE_TABLE(mcb, men_z188_ids);
+
+static struct mcb_driver men_z188_driver = {
+ .driver = {
+ .name = "z188-adc",
+ .owner = THIS_MODULE,
+ },
+ .probe = men_z188_probe,
+ .remove = men_z188_remove,
+ .id_table = men_z188_ids,
+};
+module_mcb_driver(men_z188_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IIO ADC driver for MEN 16z188 ADC Core");
+MODULE_ALIAS("mcb:16z188");
diff --git a/drivers/mcb/Kconfig b/drivers/mcb/Kconfig
new file mode 100644
index 000000000000..e9a6976e1010
--- /dev/null
+++ b/drivers/mcb/Kconfig
@@ -0,0 +1,31 @@
+#
+# MEN Chameleon Bus (MCB) support
+#
+
+menuconfig MCB
+ tristate "MCB support"
+ default n
+ depends on HAS_IOMEM
+ help
+
+ The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik
+ FPGA based devices. It is used to identify MCB based IP-Cores within
+ an FPGA and provide the necessary framework for instantiating drivers
+ for these devices.
+
+ If build as a module, the module is called mcb.ko
+
+if MCB
+config MCB_PCI
+ tristate "PCI based MCB carrier"
+ default n
+ depends on PCI
+ help
+
+ This is a MCB carrier on a PCI device. Both PCI attached on-board
+ FPGAs as well as CompactPCI attached MCB FPGAs are supported with
+ this driver.
+
+ If build as a module, the module is called mcb-pci.ko
+
+endif # MCB
diff --git a/drivers/mcb/Makefile b/drivers/mcb/Makefile
new file mode 100644
index 000000000000..1ae141311def
--- /dev/null
+++ b/drivers/mcb/Makefile
@@ -0,0 +1,7 @@
+
+obj-$(CONFIG_MCB) += mcb.o
+
+mcb-y += mcb-core.o
+mcb-y += mcb-parse.o
+
+obj-$(CONFIG_MCB_PCI) += mcb-pci.o
diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c
new file mode 100644
index 000000000000..bbe12932d404
--- /dev/null
+++ b/drivers/mcb/mcb-core.c
@@ -0,0 +1,414 @@
+/*
+ * MEN Chameleon Bus.
+ *
+ * Copyright (C) 2013 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/idr.h>
+#include <linux/mcb.h>
+
+static DEFINE_IDA(mcb_ida);
+
+static const struct mcb_device_id *mcb_match_id(const struct mcb_device_id *ids,
+ struct mcb_device *dev)
+{
+ if (ids) {
+ while (ids->device) {
+ if (ids->device == dev->id)
+ return ids;
+ ids++;
+ }
+ }
+
+ return NULL;
+}
+
+static int mcb_match(struct device *dev, struct device_driver *drv)
+{
+ struct mcb_driver *mdrv = to_mcb_driver(drv);
+ struct mcb_device *mdev = to_mcb_device(dev);
+ const struct mcb_device_id *found_id;
+
+ found_id = mcb_match_id(mdrv->id_table, mdev);
+ if (found_id)
+ return 1;
+
+ return 0;
+}
+
+static int mcb_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct mcb_device *mdev = to_mcb_device(dev);
+ int ret;
+
+ ret = add_uevent_var(env, "MODALIAS=mcb:16z%03d", mdev->id);
+ if (ret)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int mcb_probe(struct device *dev)
+{
+ struct mcb_driver *mdrv = to_mcb_driver(dev->driver);
+ struct mcb_device *mdev = to_mcb_device(dev);
+ const struct mcb_device_id *found_id;
+
+ found_id = mcb_match_id(mdrv->id_table, mdev);
+ if (!found_id)
+ return -ENODEV;
+
+ return mdrv->probe(mdev, found_id);
+}
+
+static int mcb_remove(struct device *dev)
+{
+ struct mcb_driver *mdrv = to_mcb_driver(dev->driver);
+ struct mcb_device *mdev = to_mcb_device(dev);
+
+ mdrv->remove(mdev);
+
+ put_device(&mdev->dev);
+
+ return 0;
+}
+
+static void mcb_shutdown(struct device *dev)
+{
+ struct mcb_device *mdev = to_mcb_device(dev);
+ struct mcb_driver *mdrv = mdev->driver;
+
+ if (mdrv && mdrv->shutdown)
+ mdrv->shutdown(mdev);
+}
+
+static struct bus_type mcb_bus_type = {
+ .name = "mcb",
+ .match = mcb_match,
+ .uevent = mcb_uevent,
+ .probe = mcb_probe,
+ .remove = mcb_remove,
+ .shutdown = mcb_shutdown,
+};
+
+/**
+ * __mcb_register_driver() - Register a @mcb_driver at the system
+ * @drv: The @mcb_driver
+ * @owner: The @mcb_driver's module
+ * @mod_name: The name of the @mcb_driver's module
+ *
+ * Register a @mcb_driver at the system. Perform some sanity checks, if
+ * the .probe and .remove methods are provided by the driver.
+ */
+int __mcb_register_driver(struct mcb_driver *drv, struct module *owner,
+ const char *mod_name)
+{
+ if (!drv->probe || !drv->remove)
+ return -EINVAL;
+
+ drv->driver.owner = owner;
+ drv->driver.bus = &mcb_bus_type;
+ drv->driver.mod_name = mod_name;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__mcb_register_driver);
+
+/**
+ * mcb_unregister_driver() - Unregister a @mcb_driver from the system
+ * @drv: The @mcb_driver
+ *
+ * Unregister a @mcb_driver from the system.
+ */
+void mcb_unregister_driver(struct mcb_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(mcb_unregister_driver);
+
+static void mcb_release_dev(struct device *dev)
+{
+ struct mcb_device *mdev = to_mcb_device(dev);
+
+ mcb_bus_put(mdev->bus);
+ kfree(mdev);
+}
+
+/**
+ * mcb_device_register() - Register a mcb_device
+ * @bus: The @mcb_bus of the device
+ * @dev: The @mcb_device
+ *
+ * Register a specific @mcb_device at a @mcb_bus and the system itself.
+ */
+int mcb_device_register(struct mcb_bus *bus, struct mcb_device *dev)
+{
+ int ret;
+ int device_id;
+
+ device_initialize(&dev->dev);
+ dev->dev.bus = &mcb_bus_type;
+ dev->dev.parent = bus->dev.parent;
+ dev->dev.release = mcb_release_dev;
+
+ device_id = dev->id;
+ dev_set_name(&dev->dev, "mcb%d-16z%03d-%d:%d:%d",
+ bus->bus_nr, device_id, dev->inst, dev->group, dev->var);
+
+ ret = device_add(&dev->dev);
+ if (ret < 0) {
+ pr_err("Failed registering device 16z%03d on bus mcb%d (%d)\n",
+ device_id, bus->bus_nr, ret);
+ goto out;
+ }
+
+ return 0;
+
+out:
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mcb_device_register);
+
+/**
+ * mcb_alloc_bus() - Allocate a new @mcb_bus
+ *
+ * Allocate a new @mcb_bus.
+ */
+struct mcb_bus *mcb_alloc_bus(void)
+{
+ struct mcb_bus *bus;
+ int bus_nr;
+
+ bus = kzalloc(sizeof(struct mcb_bus), GFP_KERNEL);
+ if (!bus)
+ return NULL;
+
+ bus_nr = ida_simple_get(&mcb_ida, 0, 0, GFP_KERNEL);
+ if (bus_nr < 0) {
+ kfree(bus);
+ return ERR_PTR(bus_nr);
+ }
+
+ INIT_LIST_HEAD(&bus->children);
+ bus->bus_nr = bus_nr;
+
+ return bus;
+}
+EXPORT_SYMBOL_GPL(mcb_alloc_bus);
+
+static int __mcb_devices_unregister(struct device *dev, void *data)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static void mcb_devices_unregister(struct mcb_bus *bus)
+{
+ bus_for_each_dev(&mcb_bus_type, NULL, NULL, __mcb_devices_unregister);
+}
+/**
+ * mcb_release_bus() - Free a @mcb_bus
+ * @bus: The @mcb_bus to release
+ *
+ * Release an allocated @mcb_bus from the system.
+ */
+void mcb_release_bus(struct mcb_bus *bus)
+{
+ mcb_devices_unregister(bus);
+
+ ida_simple_remove(&mcb_ida, bus->bus_nr);
+
+ kfree(bus);
+}
+EXPORT_SYMBOL_GPL(mcb_release_bus);
+
+/**
+ * mcb_bus_put() - Increment refcnt
+ * @bus: The @mcb_bus
+ *
+ * Get a @mcb_bus' ref
+ */
+struct mcb_bus *mcb_bus_get(struct mcb_bus *bus)
+{
+ if (bus)
+ get_device(&bus->dev);
+
+ return bus;
+}
+EXPORT_SYMBOL_GPL(mcb_bus_get);
+
+/**
+ * mcb_bus_put() - Decrement refcnt
+ * @bus: The @mcb_bus
+ *
+ * Release a @mcb_bus' ref
+ */
+void mcb_bus_put(struct mcb_bus *bus)
+{
+ if (bus)
+ put_device(&bus->dev);
+}
+EXPORT_SYMBOL_GPL(mcb_bus_put);
+
+/**
+ * mcb_alloc_dev() - Allocate a device
+ * @bus: The @mcb_bus the device is part of
+ *
+ * Allocate a @mcb_device and add bus.
+ */
+struct mcb_device *mcb_alloc_dev(struct mcb_bus *bus)
+{
+ struct mcb_device *dev;
+
+ dev = kzalloc(sizeof(struct mcb_device), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ INIT_LIST_HEAD(&dev->bus_list);
+ dev->bus = bus;
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(mcb_alloc_dev);
+
+/**
+ * mcb_free_dev() - Free @mcb_device
+ * @dev: The device to free
+ *
+ * Free a @mcb_device
+ */
+void mcb_free_dev(struct mcb_device *dev)
+{
+ kfree(dev);
+}
+EXPORT_SYMBOL_GPL(mcb_free_dev);
+
+static int __mcb_bus_add_devices(struct device *dev, void *data)
+{
+ struct mcb_device *mdev = to_mcb_device(dev);
+ int retval;
+
+ if (mdev->is_added)
+ return 0;
+
+ retval = device_attach(dev);
+ if (retval < 0)
+ dev_err(dev, "Error adding device (%d)\n", retval);
+
+ mdev->is_added = true;
+
+ return 0;
+}
+
+static int __mcb_bus_add_child(struct device *dev, void *data)
+{
+ struct mcb_device *mdev = to_mcb_device(dev);
+ struct mcb_bus *child;
+
+ BUG_ON(!mdev->is_added);
+ child = mdev->subordinate;
+
+ if (child)
+ mcb_bus_add_devices(child);
+
+ return 0;
+}
+
+/**
+ * mcb_bus_add_devices() - Add devices in the bus' internal device list
+ * @bus: The @mcb_bus we add the devices
+ *
+ * Add devices in the bus' internal device list to the system.
+ */
+void mcb_bus_add_devices(const struct mcb_bus *bus)
+{
+ bus_for_each_dev(&mcb_bus_type, NULL, NULL, __mcb_bus_add_devices);
+ bus_for_each_dev(&mcb_bus_type, NULL, NULL, __mcb_bus_add_child);
+
+}
+EXPORT_SYMBOL_GPL(mcb_bus_add_devices);
+
+/**
+ * mcb_request_mem() - Request memory
+ * @dev: The @mcb_device the memory is for
+ * @name: The name for the memory reference.
+ *
+ * Request memory for a @mcb_device. If @name is NULL the driver name will
+ * be used.
+ */
+struct resource *mcb_request_mem(struct mcb_device *dev, const char *name)
+{
+ struct resource *mem;
+ u32 size;
+
+ if (!name)
+ name = dev->dev.driver->name;
+
+ size = resource_size(&dev->mem);
+
+ mem = request_mem_region(dev->mem.start, size, name);
+ if (!mem)
+ return ERR_PTR(-EBUSY);
+
+ return mem;
+}
+EXPORT_SYMBOL_GPL(mcb_request_mem);
+
+/**
+ * mcb_release_mem() - Release memory requested by device
+ * @dev: The @mcb_device that requested the memory
+ *
+ * Release memory that was prior requested via @mcb_request_mem().
+ */
+void mcb_release_mem(struct resource *mem)
+{
+ u32 size;
+
+ size = resource_size(mem);
+ release_mem_region(mem->start, size);
+}
+EXPORT_SYMBOL_GPL(mcb_release_mem);
+
+/**
+ * mcb_get_irq() - Get device's IRQ number
+ * @dev: The @mcb_device the IRQ is for
+ *
+ * Get the IRQ number of a given @mcb_device.
+ */
+int mcb_get_irq(struct mcb_device *dev)
+{
+ struct resource *irq = &dev->irq;
+
+ return irq->start;
+}
+EXPORT_SYMBOL_GPL(mcb_get_irq);
+
+static int mcb_init(void)
+{
+ return bus_register(&mcb_bus_type);
+}
+
+static void mcb_exit(void)
+{
+ bus_unregister(&mcb_bus_type);
+}
+
+/* mcb must be initialized after PCI but before the chameleon drivers.
+ * That means we must use some initcall between subsys_initcall and
+ * device_initcall.
+ */
+fs_initcall(mcb_init);
+module_exit(mcb_exit);
+
+MODULE_DESCRIPTION("MEN Chameleon Bus Driver");
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mcb/mcb-internal.h b/drivers/mcb/mcb-internal.h
new file mode 100644
index 000000000000..f956ef26c0ce
--- /dev/null
+++ b/drivers/mcb/mcb-internal.h
@@ -0,0 +1,118 @@
+#ifndef __MCB_INTERNAL
+#define __MCB_INTERNAL
+
+#include <linux/types.h>
+
+#define PCI_VENDOR_ID_MEN 0x1a88
+#define PCI_DEVICE_ID_MEN_CHAMELEON 0x4d45
+#define CHAMELEON_FILENAME_LEN 12
+#define CHAMELEONV2_MAGIC 0xabce
+
+enum chameleon_descriptor_type {
+ CHAMELEON_DTYPE_GENERAL = 0x0,
+ CHAMELEON_DTYPE_BRIDGE = 0x1,
+ CHAMELEON_DTYPE_CPU = 0x2,
+ CHAMELEON_DTYPE_BAR = 0x3,
+ CHAMELEON_DTYPE_END = 0xf,
+};
+
+enum chameleon_bus_type {
+ CHAMELEON_BUS_WISHBONE,
+ CHAMELEON_BUS_AVALON,
+ CHAMELEON_BUS_LPC,
+ CHAMELEON_BUS_ISA,
+};
+
+/**
+ * struct chameleon_fpga_header
+ *
+ * @revision: Revison of Chameleon table in FPGA
+ * @model: Chameleon table model ASCII char
+ * @minor: Revision minor
+ * @bus_type: Bus type (usually %CHAMELEON_BUS_WISHBONE)
+ * @magic: Chameleon header magic number (0xabce for version 2)
+ * @reserved: Reserved
+ * @filename: Filename of FPGA bitstream
+ */
+struct chameleon_fpga_header {
+ u8 revision;
+ char model;
+ u8 minor;
+ u8 bus_type;
+ u16 magic;
+ u16 reserved;
+ /* This one has no '\0' at the end!!! */
+ char filename[CHAMELEON_FILENAME_LEN];
+} __packed;
+#define HEADER_MAGIC_OFFSET 0x4
+
+/**
+ * struct chameleon_gdd - Chameleon General Device Descriptor
+ *
+ * @irq: the position in the FPGA's IRQ controller vector
+ * @rev: the revision of the variant's implementation
+ * @var: the variant of the IP core
+ * @dev: the device the IP core is
+ * @dtype: device descriptor type
+ * @bar: BAR offset that must be added to module offset
+ * @inst: the instance number of the device, 0 is first instance
+ * @group: the group the device belongs to (0 = no group)
+ * @reserved: reserved
+ * @offset: beginning of the address window of desired module
+ * @size: size of the module's address window
+ */
+struct chameleon_gdd {
+ __le32 reg1;
+ __le32 reg2;
+ __le32 offset;
+ __le32 size;
+
+} __packed;
+
+/* GDD Register 1 fields */
+#define GDD_IRQ(x) ((x) & 0x1f)
+#define GDD_REV(x) (((x) >> 5) & 0x3f)
+#define GDD_VAR(x) (((x) >> 11) & 0x3f)
+#define GDD_DEV(x) (((x) >> 18) & 0x3ff)
+#define GDD_DTY(x) (((x) >> 28) & 0xf)
+
+/* GDD Register 2 fields */
+#define GDD_BAR(x) ((x) & 0x7)
+#define GDD_INS(x) (((x) >> 3) & 0x3f)
+#define GDD_GRP(x) (((x) >> 9) & 0x3f)
+
+/**
+ * struct chameleon_bdd - Chameleon Bridge Device Descriptor
+ *
+ * @irq: the position in the FPGA's IRQ controller vector
+ * @rev: the revision of the variant's implementation
+ * @var: the variant of the IP core
+ * @dev: the device the IP core is
+ * @dtype: device descriptor type
+ * @bar: BAR offset that must be added to module offset
+ * @inst: the instance number of the device, 0 is first instance
+ * @dbar: destination bar from the bus _behind_ the bridge
+ * @chamoff: offset within the BAR of the source bus
+ * @offset:
+ * @size:
+ */
+struct chameleon_bdd {
+ unsigned int irq:6;
+ unsigned int rev:6;
+ unsigned int var:6;
+ unsigned int dev:10;
+ unsigned int dtype:4;
+ unsigned int bar:3;
+ unsigned int inst:6;
+ unsigned int dbar:3;
+ unsigned int group:6;
+ unsigned int reserved:14;
+ u32 chamoff;
+ u32 offset;
+ u32 size;
+} __packed;
+
+int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
+ void __iomem *base);
+
+#endif
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
new file mode 100644
index 000000000000..d1278b5f3028
--- /dev/null
+++ b/drivers/mcb/mcb-parse.c
@@ -0,0 +1,159 @@
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/mcb.h>
+
+#include "mcb-internal.h"
+
+struct mcb_parse_priv {
+ phys_addr_t mapbase;
+ void __iomem *base;
+};
+
+#define for_each_chameleon_cell(dtype, p) \
+ for ((dtype) = get_next_dtype((p)); \
+ (dtype) != CHAMELEON_DTYPE_END; \
+ (dtype) = get_next_dtype((p)))
+
+static inline uint32_t get_next_dtype(void __iomem *p)
+{
+ uint32_t dtype;
+
+ dtype = readl(p);
+ return dtype >> 28;
+}
+
+static int chameleon_parse_bdd(struct mcb_bus *bus,
+ phys_addr_t mapbase,
+ void __iomem *base)
+{
+ return 0;
+}
+
+static int chameleon_parse_gdd(struct mcb_bus *bus,
+ phys_addr_t mapbase,
+ void __iomem *base)
+{
+ struct chameleon_gdd __iomem *gdd =
+ (struct chameleon_gdd __iomem *) base;
+ struct mcb_device *mdev;
+ u32 offset;
+ u32 size;
+ int ret;
+ __le32 reg1;
+ __le32 reg2;
+
+ mdev = mcb_alloc_dev(bus);
+ if (!mdev)
+ return -ENOMEM;
+
+ reg1 = readl(&gdd->reg1);
+ reg2 = readl(&gdd->reg2);
+ offset = readl(&gdd->offset);
+ size = readl(&gdd->size);
+
+ mdev->id = GDD_DEV(reg1);
+ mdev->rev = GDD_REV(reg1);
+ mdev->var = GDD_VAR(reg1);
+ mdev->bar = GDD_BAR(reg1);
+ mdev->group = GDD_GRP(reg2);
+ mdev->inst = GDD_INS(reg2);
+
+ pr_debug("Found a 16z%03d\n", mdev->id);
+
+ mdev->irq.start = GDD_IRQ(reg1);
+ mdev->irq.end = GDD_IRQ(reg1);
+ mdev->irq.flags = IORESOURCE_IRQ;
+
+ mdev->mem.start = mapbase + offset;
+ mdev->mem.end = mdev->mem.start + size - 1;
+ mdev->mem.flags = IORESOURCE_MEM;
+
+ mdev->is_added = false;
+
+ ret = mcb_device_register(bus, mdev);
+ if (ret < 0)
+ goto err;
+
+ return 0;
+
+err:
+ mcb_free_dev(mdev);
+
+ return ret;
+}
+
+int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
+ void __iomem *base)
+{
+ char __iomem *p = base;
+ struct chameleon_fpga_header *header;
+ uint32_t dtype;
+ int num_cells = 0;
+ int ret = 0;
+ u32 hsize;
+
+ hsize = sizeof(struct chameleon_fpga_header);
+
+ header = kzalloc(hsize, GFP_KERNEL);
+ if (!header)
+ return -ENOMEM;
+
+ /* Extract header information */
+ memcpy_fromio(header, p, hsize);
+ /* We only support chameleon v2 at the moment */
+ header->magic = le16_to_cpu(header->magic);
+ if (header->magic != CHAMELEONV2_MAGIC) {
+ pr_err("Unsupported chameleon version 0x%x\n",
+ header->magic);
+ kfree(header);
+ return -ENODEV;
+ }
+ p += hsize;
+
+ pr_debug("header->revision = %d\n", header->revision);
+ pr_debug("header->model = 0x%x ('%c')\n", header->model,
+ header->model);
+ pr_debug("header->minor = %d\n", header->minor);
+ pr_debug("header->bus_type = 0x%x\n", header->bus_type);
+
+
+ pr_debug("header->magic = 0x%x\n", header->magic);
+ pr_debug("header->filename = \"%.*s\"\n", CHAMELEON_FILENAME_LEN,
+ header->filename);
+
+ for_each_chameleon_cell(dtype, p) {
+ switch (dtype) {
+ case CHAMELEON_DTYPE_GENERAL:
+ ret = chameleon_parse_gdd(bus, mapbase, p);
+ if (ret < 0)
+ goto out;
+ p += sizeof(struct chameleon_gdd);
+ break;
+ case CHAMELEON_DTYPE_BRIDGE:
+ chameleon_parse_bdd(bus, mapbase, p);
+ p += sizeof(struct chameleon_bdd);
+ break;
+ case CHAMELEON_DTYPE_END:
+ break;
+ default:
+ pr_err("Invalid chameleon descriptor type 0x%x\n",
+ dtype);
+ return -EINVAL;
+ }
+ num_cells++;
+ }
+
+ if (num_cells == 0)
+ num_cells = -EINVAL;
+
+ kfree(header);
+ return num_cells;
+
+out:
+ kfree(header);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(chameleon_parse_cells);
diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
new file mode 100644
index 000000000000..99c742cbfb5b
--- /dev/null
+++ b/drivers/mcb/mcb-pci.c
@@ -0,0 +1,114 @@
+/*
+ * MEN Chameleon Bus.
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/mcb.h>
+
+#include "mcb-internal.h"
+
+struct priv {
+ struct mcb_bus *bus;
+ void __iomem *base;
+};
+
+static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct priv *priv;
+ phys_addr_t mapbase;
+ int ret;
+ int num_cells;
+ unsigned long flags;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ return -ENODEV;
+ }
+
+ mapbase = pci_resource_start(pdev, 0);
+ if (!mapbase) {
+ dev_err(&pdev->dev, "No PCI resource\n");
+ goto err_start;
+ }
+
+ ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+ goto err_start;
+ }
+
+ priv->base = pci_iomap(pdev, 0, 0);
+ if (!priv->base) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ ret = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ flags = pci_resource_flags(pdev, 0);
+ if (flags & IORESOURCE_IO) {
+ ret = -ENOTSUPP;
+ dev_err(&pdev->dev,
+ "IO mapped PCI devices are not supported\n");
+ goto err_ioremap;
+ }
+
+ pci_set_drvdata(pdev, priv);
+
+ priv->bus = mcb_alloc_bus();
+
+ ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+ if (ret < 0)
+ goto err_drvdata;
+ num_cells = ret;
+
+ dev_dbg(&pdev->dev, "Found %d cells\n", num_cells);
+
+ mcb_bus_add_devices(priv->bus);
+
+err_drvdata:
+ pci_iounmap(pdev, priv->base);
+err_ioremap:
+ pci_release_region(pdev, 0);
+err_start:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void mcb_pci_remove(struct pci_dev *pdev)
+{
+ struct priv *priv = pci_get_drvdata(pdev);
+
+ mcb_release_bus(priv->bus);
+}
+
+static const struct pci_device_id mcb_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MEN, PCI_DEVICE_ID_MEN_CHAMELEON) },
+ { 0 },
+};
+MODULE_DEVICE_TABLE(pci, mcb_pci_tbl);
+
+static struct pci_driver mcb_pci_driver = {
+ .name = "mcb-pci",
+ .id_table = mcb_pci_tbl,
+ .probe = mcb_pci_probe,
+ .remove = mcb_pci_remove,
+};
+
+module_pci_driver(mcb_pci_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MCB over PCI support");
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 08d9a207259a..b428c0ae63d5 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -66,7 +66,7 @@ static int dm_ulog_sendto_server(struct dm_ulog_request *tfr)
msg->seq = tfr->seq;
msg->len = sizeof(struct dm_ulog_request) + tfr->data_size;
- r = cn_netlink_send(msg, 0, gfp_any());
+ r = cn_netlink_send(msg, 0, 0, gfp_any());
return r;
}
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 29a11db365bc..c59e9c96e86d 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -7,6 +7,17 @@ menuconfig MEMORY
if MEMORY
+config TI_AEMIF
+ tristate "Texas Instruments AEMIF driver"
+ depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
+ help
+ This driver is for the AEMIF module available in Texas Instruments
+ SoCs. AEMIF stands for Asynchronous External Memory Interface and
+ is intended to provide a glue-less interface to a variety of
+ asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
+ of 256M bytes of any of these memories can be accessed at a given
+ time via four chip selects with 64M byte access per chip select.
+
config TI_EMIF
tristate "Texas Instruments EMIF driver"
depends on ARCH_OMAP2PLUS
@@ -50,4 +61,8 @@ config TEGRA30_MC
analysis, especially for IOMMU/SMMU(System Memory Management
Unit) module.
+config FSL_IFC
+ bool
+ depends on FSL_SOC
+
endif
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 969d923dad93..71160a2b7313 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -5,7 +5,9 @@
ifeq ($(CONFIG_DDR),y)
obj-$(CONFIG_OF) += of_memory.o
endif
+obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
+obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index fbc885b31946..3d5d792d5cb2 100644
--- a/arch/powerpc/sysdev/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -29,8 +29,8 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/fsl_ifc.h>
#include <asm/prom.h>
-#include <asm/fsl_ifc.h>
struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
@@ -298,7 +298,11 @@ static struct platform_driver fsl_ifc_ctrl_driver = {
.remove = fsl_ifc_ctrl_remove,
};
-module_platform_driver(fsl_ifc_ctrl_driver);
+static int __init fsl_ifc_init(void)
+{
+ return platform_driver_register(&fsl_ifc_ctrl_driver);
+}
+subsys_initcall(fsl_ifc_init);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Freescale Semiconductor");
diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c
new file mode 100644
index 000000000000..d3df7602f406
--- /dev/null
+++ b/drivers/memory/ti-aemif.c
@@ -0,0 +1,427 @@
+/*
+ * TI AEMIF driver
+ *
+ * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Authors:
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TA_SHIFT 2
+#define RHOLD_SHIFT 4
+#define RSTROBE_SHIFT 7
+#define RSETUP_SHIFT 13
+#define WHOLD_SHIFT 17
+#define WSTROBE_SHIFT 20
+#define WSETUP_SHIFT 26
+#define EW_SHIFT 30
+#define SS_SHIFT 31
+
+#define TA(x) ((x) << TA_SHIFT)
+#define RHOLD(x) ((x) << RHOLD_SHIFT)
+#define RSTROBE(x) ((x) << RSTROBE_SHIFT)
+#define RSETUP(x) ((x) << RSETUP_SHIFT)
+#define WHOLD(x) ((x) << WHOLD_SHIFT)
+#define WSTROBE(x) ((x) << WSTROBE_SHIFT)
+#define WSETUP(x) ((x) << WSETUP_SHIFT)
+#define EW(x) ((x) << EW_SHIFT)
+#define SS(x) ((x) << SS_SHIFT)
+
+#define ASIZE_MAX 0x1
+#define TA_MAX 0x3
+#define RHOLD_MAX 0x7
+#define RSTROBE_MAX 0x3f
+#define RSETUP_MAX 0xf
+#define WHOLD_MAX 0x7
+#define WSTROBE_MAX 0x3f
+#define WSETUP_MAX 0xf
+#define EW_MAX 0x1
+#define SS_MAX 0x1
+#define NUM_CS 4
+
+#define TA_VAL(x) (((x) & TA(TA_MAX)) >> TA_SHIFT)
+#define RHOLD_VAL(x) (((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT)
+#define RSTROBE_VAL(x) (((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT)
+#define RSETUP_VAL(x) (((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT)
+#define WHOLD_VAL(x) (((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT)
+#define WSTROBE_VAL(x) (((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
+#define WSETUP_VAL(x) (((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
+#define EW_VAL(x) (((x) & EW(EW_MAX)) >> EW_SHIFT)
+#define SS_VAL(x) (((x) & SS(SS_MAX)) >> SS_SHIFT)
+
+#define NRCSR_OFFSET 0x00
+#define AWCCR_OFFSET 0x04
+#define A1CR_OFFSET 0x10
+
+#define ACR_ASIZE_MASK 0x3
+#define ACR_EW_MASK BIT(30)
+#define ACR_SS_MASK BIT(31)
+#define ASIZE_16BIT 1
+
+#define CONFIG_MASK (TA(TA_MAX) | \
+ RHOLD(RHOLD_MAX) | \
+ RSTROBE(RSTROBE_MAX) | \
+ RSETUP(RSETUP_MAX) | \
+ WHOLD(WHOLD_MAX) | \
+ WSTROBE(WSTROBE_MAX) | \
+ WSETUP(WSETUP_MAX) | \
+ EW(EW_MAX) | SS(SS_MAX) | \
+ ASIZE_MAX)
+
+/**
+ * struct aemif_cs_data: structure to hold cs parameters
+ * @cs: chip-select number
+ * @wstrobe: write strobe width, ns
+ * @rstrobe: read strobe width, ns
+ * @wsetup: write setup width, ns
+ * @whold: write hold width, ns
+ * @rsetup: read setup width, ns
+ * @rhold: read hold width, ns
+ * @ta: minimum turn around time, ns
+ * @enable_ss: enable/disable select strobe mode
+ * @enable_ew: enable/disable extended wait mode
+ * @asize: width of the asynchronous device's data bus
+ */
+struct aemif_cs_data {
+ u8 cs;
+ u16 wstrobe;
+ u16 rstrobe;
+ u8 wsetup;
+ u8 whold;
+ u8 rsetup;
+ u8 rhold;
+ u8 ta;
+ u8 enable_ss;
+ u8 enable_ew;
+ u8 asize;
+};
+
+/**
+ * struct aemif_device: structure to hold device data
+ * @base: base address of AEMIF registers
+ * @clk: source clock
+ * @clk_rate: clock's rate in kHz
+ * @num_cs: number of assigned chip-selects
+ * @cs_offset: start number of cs nodes
+ * @cs_data: array of chip-select settings
+ */
+struct aemif_device {
+ void __iomem *base;
+ struct clk *clk;
+ unsigned long clk_rate;
+ u8 num_cs;
+ int cs_offset;
+ struct aemif_cs_data cs_data[NUM_CS];
+};
+
+/**
+ * aemif_calc_rate - calculate timing data.
+ * @pdev: platform device to calculate for
+ * @wanted: The cycle time needed in nanoseconds.
+ * @clk: The input clock rate in kHz.
+ * @max: The maximum divider value that can be programmed.
+ *
+ * On success, returns the calculated timing value minus 1 for easy
+ * programming into AEMIF timing registers, else negative errno.
+ */
+static int aemif_calc_rate(struct platform_device *pdev, int wanted,
+ unsigned long clk, int max)
+{
+ int result;
+
+ result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
+
+ dev_dbg(&pdev->dev, "%s: result %d from %ld, %d\n", __func__, result,
+ clk, wanted);
+
+ /* It is generally OK to have a more relaxed timing than requested... */
+ if (result < 0)
+ result = 0;
+
+ /* ... But configuring tighter timings is not an option. */
+ else if (result > max)
+ result = -EINVAL;
+
+ return result;
+}
+
+/**
+ * aemif_config_abus - configure async bus parameters
+ * @pdev: platform device to configure for
+ * @csnum: aemif chip select number
+ *
+ * This function programs the given timing values (in real clock) into the
+ * AEMIF registers taking the AEMIF clock into account.
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int aemif_config_abus(struct platform_device *pdev, int csnum)
+{
+ struct aemif_device *aemif = platform_get_drvdata(pdev);
+ struct aemif_cs_data *data = &aemif->cs_data[csnum];
+ int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+ unsigned long clk_rate = aemif->clk_rate;
+ unsigned offset;
+ u32 set, val;
+
+ offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+
+ ta = aemif_calc_rate(pdev, data->ta, clk_rate, TA_MAX);
+ rhold = aemif_calc_rate(pdev, data->rhold, clk_rate, RHOLD_MAX);
+ rstrobe = aemif_calc_rate(pdev, data->rstrobe, clk_rate, RSTROBE_MAX);
+ rsetup = aemif_calc_rate(pdev, data->rsetup, clk_rate, RSETUP_MAX);
+ whold = aemif_calc_rate(pdev, data->whold, clk_rate, WHOLD_MAX);
+ wstrobe = aemif_calc_rate(pdev, data->wstrobe, clk_rate, WSTROBE_MAX);
+ wsetup = aemif_calc_rate(pdev, data->wsetup, clk_rate, WSETUP_MAX);
+
+ if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
+ whold < 0 || wstrobe < 0 || wsetup < 0) {
+ dev_err(&pdev->dev, "%s: cannot get suitable timings\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
+ WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
+
+ set |= (data->asize & ACR_ASIZE_MASK);
+ if (data->enable_ew)
+ set |= ACR_EW_MASK;
+ if (data->enable_ss)
+ set |= ACR_SS_MASK;
+
+ val = readl(aemif->base + offset);
+ val &= ~CONFIG_MASK;
+ val |= set;
+ writel(val, aemif->base + offset);
+
+ return 0;
+}
+
+static inline int aemif_cycles_to_nsec(int val, unsigned long clk_rate)
+{
+ return ((val + 1) * NSEC_PER_MSEC) / clk_rate;
+}
+
+/**
+ * aemif_get_hw_params - function to read hw register values
+ * @pdev: platform device to read for
+ * @csnum: aemif chip select number
+ *
+ * This function reads the defaults from the registers and update
+ * the timing values. Required for get/set commands and also for
+ * the case when driver needs to use defaults in hardware.
+ */
+static void aemif_get_hw_params(struct platform_device *pdev, int csnum)
+{
+ struct aemif_device *aemif = platform_get_drvdata(pdev);
+ struct aemif_cs_data *data = &aemif->cs_data[csnum];
+ unsigned long clk_rate = aemif->clk_rate;
+ u32 val, offset;
+
+ offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4;
+ val = readl(aemif->base + offset);
+
+ data->ta = aemif_cycles_to_nsec(TA_VAL(val), clk_rate);
+ data->rhold = aemif_cycles_to_nsec(RHOLD_VAL(val), clk_rate);
+ data->rstrobe = aemif_cycles_to_nsec(RSTROBE_VAL(val), clk_rate);
+ data->rsetup = aemif_cycles_to_nsec(RSETUP_VAL(val), clk_rate);
+ data->whold = aemif_cycles_to_nsec(WHOLD_VAL(val), clk_rate);
+ data->wstrobe = aemif_cycles_to_nsec(WSTROBE_VAL(val), clk_rate);
+ data->wsetup = aemif_cycles_to_nsec(WSETUP_VAL(val), clk_rate);
+ data->enable_ew = EW_VAL(val);
+ data->enable_ss = SS_VAL(val);
+ data->asize = val & ASIZE_MAX;
+}
+
+/**
+ * of_aemif_parse_abus_config - parse CS configuration from DT
+ * @pdev: platform device to parse for
+ * @np: device node ptr
+ *
+ * This function update the emif async bus configuration based on the values
+ * configured in a cs device binding node.
+ */
+static int of_aemif_parse_abus_config(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct aemif_device *aemif = platform_get_drvdata(pdev);
+ struct aemif_cs_data *data;
+ u32 cs;
+ u32 val;
+
+ if (of_property_read_u32(np, "ti,cs-chipselect", &cs)) {
+ dev_dbg(&pdev->dev, "cs property is required");
+ return -EINVAL;
+ }
+
+ if (cs - aemif->cs_offset >= NUM_CS || cs < aemif->cs_offset) {
+ dev_dbg(&pdev->dev, "cs number is incorrect %d", cs);
+ return -EINVAL;
+ }
+
+ if (aemif->num_cs >= NUM_CS) {
+ dev_dbg(&pdev->dev, "cs count is more than %d", NUM_CS);
+ return -EINVAL;
+ }
+
+ data = &aemif->cs_data[aemif->num_cs];
+ data->cs = cs;
+
+ /* read the current value in the hw register */
+ aemif_get_hw_params(pdev, aemif->num_cs++);
+
+ /* override the values from device node */
+ if (!of_property_read_u32(np, "ti,cs-min-turnaround-ns", &val))
+ data->ta = val;
+
+ if (!of_property_read_u32(np, "ti,cs-read-hold-ns", &val))
+ data->rhold = val;
+
+ if (!of_property_read_u32(np, "ti,cs-read-strobe-ns", &val))
+ data->rstrobe = val;
+
+ if (!of_property_read_u32(np, "ti,cs-read-setup-ns", &val))
+ data->rsetup = val;
+
+ if (!of_property_read_u32(np, "ti,cs-write-hold-ns", &val))
+ data->whold = val;
+
+ if (!of_property_read_u32(np, "ti,cs-write-strobe-ns", &val))
+ data->wstrobe = val;
+
+ if (!of_property_read_u32(np, "ti,cs-write-setup-ns", &val))
+ data->wsetup = val;
+
+ if (!of_property_read_u32(np, "ti,cs-bus-width", &val))
+ if (val == 16)
+ data->asize = 1;
+ data->enable_ew = of_property_read_bool(np, "ti,cs-extended-wait-mode");
+ data->enable_ss = of_property_read_bool(np, "ti,cs-select-strobe-mode");
+ return 0;
+}
+
+static const struct of_device_id aemif_of_match[] = {
+ { .compatible = "ti,davinci-aemif", },
+ { .compatible = "ti,da850-aemif", },
+ {},
+};
+
+static int aemif_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret = -ENODEV;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct aemif_device *aemif;
+
+ if (np == NULL)
+ return 0;
+
+ aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL);
+ if (!aemif)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, aemif);
+
+ aemif->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(aemif->clk)) {
+ dev_err(dev, "cannot get clock 'aemif'\n");
+ return PTR_ERR(aemif->clk);
+ }
+
+ clk_prepare_enable(aemif->clk);
+ aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC;
+
+ if (of_device_is_compatible(np, "ti,da850-aemif"))
+ aemif->cs_offset = 2;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ aemif->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(aemif->base)) {
+ ret = PTR_ERR(aemif->base);
+ goto error;
+ }
+
+ /*
+ * For every controller device node, there is a cs device node that
+ * describe the bus configuration parameters. This functions iterate
+ * over these nodes and update the cs data array.
+ */
+ for_each_available_child_of_node(np, child_np) {
+ ret = of_aemif_parse_abus_config(pdev, child_np);
+ if (ret < 0)
+ goto error;
+ }
+
+ for (i = 0; i < aemif->num_cs; i++) {
+ ret = aemif_config_abus(pdev, i);
+ if (ret < 0) {
+ dev_err(dev, "Error configuring chip select %d\n",
+ aemif->cs_data[i].cs);
+ goto error;
+ }
+ }
+
+ /*
+ * Create a child devices explicitly from here to
+ * guarantee that the child will be probed after the AEMIF timing
+ * parameters are set.
+ */
+ for_each_available_child_of_node(np, child_np) {
+ ret = of_platform_populate(child_np, NULL, NULL, dev);
+ if (ret < 0)
+ goto error;
+ }
+
+ return 0;
+error:
+ clk_disable_unprepare(aemif->clk);
+ return ret;
+}
+
+static int aemif_remove(struct platform_device *pdev)
+{
+ struct aemif_device *aemif = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(aemif->clk);
+ return 0;
+}
+
+static struct platform_driver aemif_driver = {
+ .probe = aemif_probe,
+ .remove = aemif_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(aemif_of_match),
+ },
+};
+
+module_platform_driver(aemif_driver);
+
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments AEMIF driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6cb388e8fb7d..809afebe0dad 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -235,7 +235,7 @@ config SGI_XP
config CS5535_MFGPT
tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
- depends on PCI && X86 && MFD_CS5535
+ depends on MFD_CS5535
default n
help
This driver provides access to MFGPT functionality for other
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index d3eee113baeb..a43053daad0e 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -72,7 +72,6 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 0c6e037153d2..c6cc3dc8ae1f 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 820e53d0048f..9b313f7810f5 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -47,7 +47,6 @@
#include <linux/module.h>
#include <linux/device.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/of.h>
#include "bmp085.h"
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 9e2b985293fc..14d90eae605b 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -101,7 +101,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/poll.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kref.h>
#include <linux/io.h>
diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c
index 154b02e5094f..6a672f9ef522 100644
--- a/drivers/misc/ds1682.c
+++ b/drivers/misc/ds1682.c
@@ -32,7 +32,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/string.h>
#include <linux/list.h>
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 4f3bca1003a1..634f72929e12 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
index f0fa4e8ca124..33f8673d23a6 100644
--- a/drivers/misc/eeprom/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
@@ -17,7 +17,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 78e55b501c94..9ebeacdb8ec4 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index e36157d5d3ab..580ff9df5529 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -27,7 +27,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c
index 9c34e5704304..3f2b625b2032 100644
--- a/drivers/misc/eeprom/sunxi_sid.c
+++ b/drivers/misc/eeprom/sunxi_sid.c
@@ -21,7 +21,6 @@
#include <linux/err.h>
#include <linux/export.h>
#include <linux/fs.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
@@ -96,7 +95,7 @@ static int sunxi_sid_remove(struct platform_device *pdev)
}
static const struct of_device_id sunxi_sid_of_match[] = {
- { .compatible = "allwinner,sun4i-sid", .data = (void *)16},
+ { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16},
{ .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512},
{/* sentinel */},
};
diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c
index 3bfdc07a7248..50d2096ea1c7 100644
--- a/drivers/misc/genwqe/card_debugfs.c
+++ b/drivers/misc/genwqe/card_debugfs.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
index 170bd3daf336..90520d76633f 100644
--- a/drivers/misc/hmc6352.c
+++ b/drivers/misc/hmc6352.c
@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index e3183f26216b..12c30b486b27 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -26,7 +26,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index b7f84dacf822..4a9c50a43afb 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -23,7 +23,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 61fbe6acabef..0a1565e63c71 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index 036effe9a795..3ef4627f9cb1 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -23,7 +23,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/types.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index 7c97550240f1..d324f8a97b88 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/pm_runtime.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index 9aa2bd2a71ae..bd06d0cfac45 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/err.h>
#include <linux/input.h>
#include <linux/interrupt.h>
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 49c7a23f02fc..d66a2f24f6b3 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -30,6 +30,7 @@
*
* See Documentation/fault-injection/provoke-crashes.txt for instructions
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/fs.h>
@@ -45,6 +46,7 @@
#include <linux/debugfs.h>
#include <linux/vmalloc.h>
#include <linux/mman.h>
+#include <asm/cacheflush.h>
#ifdef CONFIG_IDE
#include <linux/ide.h>
@@ -101,6 +103,7 @@ enum ctype {
CT_EXEC_USERSPACE,
CT_ACCESS_USERSPACE,
CT_WRITE_RO,
+ CT_WRITE_KERN,
};
static char* cp_name[] = {
@@ -137,6 +140,7 @@ static char* cp_type[] = {
"EXEC_USERSPACE",
"ACCESS_USERSPACE",
"WRITE_RO",
+ "WRITE_KERN",
};
static struct jprobe lkdtm;
@@ -316,6 +320,13 @@ static void do_nothing(void)
return;
}
+/* Must immediately follow do_nothing for size calculuations to work out. */
+static void do_overwritten(void)
+{
+ pr_info("do_overwritten wasn't overwritten!\n");
+ return;
+}
+
static noinline void corrupt_stack(void)
{
/* Use default char array length that triggers stack protection. */
@@ -328,7 +339,12 @@ static void execute_location(void *dst)
{
void (*func)(void) = dst;
+ pr_info("attempting ok execution at %p\n", do_nothing);
+ do_nothing();
+
memcpy(dst, do_nothing, EXEC_SIZE);
+ flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
+ pr_info("attempting bad execution at %p\n", func);
func();
}
@@ -337,8 +353,13 @@ static void execute_user_location(void *dst)
/* Intentionally crossing kernel/user memory boundary. */
void (*func)(void) = dst;
+ pr_info("attempting ok execution at %p\n", do_nothing);
+ do_nothing();
+
if (copy_to_user((void __user *)dst, do_nothing, EXEC_SIZE))
return;
+ flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
+ pr_info("attempting bad execution at %p\n", func);
func();
}
@@ -463,8 +484,12 @@ static void lkdtm_do_action(enum ctype which)
}
ptr = (unsigned long *)user_addr;
+
+ pr_info("attempting bad read at %p\n", ptr);
tmp = *ptr;
tmp += 0xc0dec0de;
+
+ pr_info("attempting bad write at %p\n", ptr);
*ptr = tmp;
vm_munmap(user_addr, PAGE_SIZE);
@@ -475,10 +500,28 @@ static void lkdtm_do_action(enum ctype which)
unsigned long *ptr;
ptr = (unsigned long *)&rodata;
+
+ pr_info("attempting bad write at %p\n", ptr);
*ptr ^= 0xabcd1234;
break;
}
+ case CT_WRITE_KERN: {
+ size_t size;
+ unsigned char *ptr;
+
+ size = (unsigned long)do_overwritten -
+ (unsigned long)do_nothing;
+ ptr = (unsigned char *)do_overwritten;
+
+ pr_info("attempting bad %zu byte write at %p\n", size, ptr);
+ memcpy(ptr, (unsigned char *)do_nothing, size);
+ flush_icache_range((unsigned long)ptr,
+ (unsigned long)(ptr + size));
+
+ do_overwritten();
+ break;
+ }
case CT_NONE:
default:
break;
@@ -493,8 +536,8 @@ static void lkdtm_handler(void)
spin_lock_irqsave(&count_lock, flags);
count--;
- printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n",
- cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
+ pr_info("Crash point %s of type %s hit, trigger in %d rounds\n",
+ cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
if (count == 0) {
do_it = true;
@@ -551,18 +594,18 @@ static int lkdtm_register_cpoint(enum cname which)
lkdtm.kp.symbol_name = "generic_ide_ioctl";
lkdtm.entry = (kprobe_opcode_t*) jp_generic_ide_ioctl;
#else
- printk(KERN_INFO "lkdtm: Crash point not available\n");
+ pr_info("Crash point not available\n");
return -EINVAL;
#endif
break;
default:
- printk(KERN_INFO "lkdtm: Invalid Crash Point\n");
+ pr_info("Invalid Crash Point\n");
return -EINVAL;
}
cpoint = which;
if ((ret = register_jprobe(&lkdtm)) < 0) {
- printk(KERN_INFO "lkdtm: Couldn't register jprobe\n");
+ pr_info("Couldn't register jprobe\n");
cpoint = CN_INVALID;
}
@@ -709,8 +752,7 @@ static ssize_t direct_entry(struct file *f, const char __user *user_buf,
if (type == CT_NONE)
return -EINVAL;
- printk(KERN_INFO "lkdtm: Performing direct entry %s\n",
- cp_type_to_str(type));
+ pr_info("Performing direct entry %s\n", cp_type_to_str(type));
lkdtm_do_action(type);
*off += count;
@@ -772,7 +814,7 @@ static int __init lkdtm_module_init(void)
/* Register debugfs interface */
lkdtm_debugfs_root = debugfs_create_dir("provoke-crash", NULL);
if (!lkdtm_debugfs_root) {
- printk(KERN_ERR "lkdtm: creating root dir failed\n");
+ pr_err("creating root dir failed\n");
return -ENODEV;
}
@@ -787,28 +829,26 @@ static int __init lkdtm_module_init(void)
de = debugfs_create_file(cur->name, 0644, lkdtm_debugfs_root,
NULL, &cur->fops);
if (de == NULL) {
- printk(KERN_ERR "lkdtm: could not create %s\n",
- cur->name);
+ pr_err("could not create %s\n", cur->name);
goto out_err;
}
}
if (lkdtm_parse_commandline() == -EINVAL) {
- printk(KERN_INFO "lkdtm: Invalid command\n");
+ pr_info("Invalid command\n");
goto out_err;
}
if (cpoint != CN_INVALID && cptype != CT_NONE) {
ret = lkdtm_register_cpoint(cpoint);
if (ret < 0) {
- printk(KERN_INFO "lkdtm: Invalid crash point %d\n",
- cpoint);
+ pr_info("Invalid crash point %d\n", cpoint);
goto out_err;
}
- printk(KERN_INFO "lkdtm: Crash point %s of type %s registered\n",
- cpoint_name, cpoint_type);
+ pr_info("Crash point %s of type %s registered\n",
+ cpoint_name, cpoint_type);
} else {
- printk(KERN_INFO "lkdtm: No crash points registered, enable through debugfs\n");
+ pr_info("No crash points registered, enable through debugfs\n");
}
return 0;
@@ -823,7 +863,7 @@ static void __exit lkdtm_module_exit(void)
debugfs_remove_recursive(lkdtm_debugfs_root);
unregister_jprobe(&lkdtm);
- printk(KERN_INFO "lkdtm: Crash point unregistered\n");
+ pr_info("Crash point unregistered\n");
}
module_init(lkdtm_module_init);
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
index c76fa31e9bf6..d23384dde73b 100644
--- a/drivers/misc/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
@@ -34,3 +34,12 @@ config INTEL_MEI_ME
82Q33 Express
82X38/X48 Express
+config INTEL_MEI_TXE
+ tristate "Intel Trusted Execution Environment with ME Interface"
+ select INTEL_MEI
+ depends on X86 && PCI && WATCHDOG_CORE
+ help
+ MEI Support for Trusted Execution Environment device on Intel SoCs
+
+ Supported SoCs:
+ Intel Bay Trail
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
index 08698a466268..8ebc6cda1373 100644
--- a/drivers/misc/mei/Makefile
+++ b/drivers/misc/mei/Makefile
@@ -1,6 +1,6 @@
#
# Makefile - Intel Management Engine Interface (Intel MEI) Linux driver
-# Copyright (c) 2010-2011, Intel Corporation.
+# Copyright (c) 2010-2014, Intel Corporation.
#
obj-$(CONFIG_INTEL_MEI) += mei.o
mei-objs := init.o
@@ -17,3 +17,7 @@ mei-$(CONFIG_DEBUG_FS) += debugfs.o
obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o
mei-me-objs := pci-me.o
mei-me-objs += hw-me.o
+
+obj-$(CONFIG_INTEL_MEI_TXE) += mei-txe.o
+mei-txe-objs := pci-txe.o
+mei-txe-objs += hw-txe.o
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 2fad84432829..b8deb3455480 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -21,7 +21,6 @@
#include <linux/fcntl.h>
#include <linux/aio.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/list.h>
@@ -35,7 +34,6 @@
#include "mei_dev.h"
#include "hbm.h"
-#include "hw-me.h"
#include "client.h"
const uuid_le mei_amthif_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d,
@@ -79,10 +77,9 @@ int mei_amthif_host_init(struct mei_device *dev)
i = mei_me_cl_by_uuid(dev, &mei_amthif_guid);
if (i < 0) {
- ret = i;
dev_info(&dev->pdev->dev,
- "amthif: failed to find the client %d\n", ret);
- return ret;
+ "amthif: failed to find the client %d\n", i);
+ return -ENOTTY;
}
cl->me_client_id = dev->me_clients[i].client_id;
@@ -116,14 +113,11 @@ int mei_amthif_host_init(struct mei_device *dev)
cl->state = MEI_FILE_CONNECTING;
- if (mei_hbm_cl_connect_req(dev, cl)) {
- dev_dbg(&dev->pdev->dev, "amthif: Failed to connect to ME client\n");
- cl->state = MEI_FILE_DISCONNECTED;
- cl->host_client_id = 0;
- } else {
- cl->timer_count = MEI_CONNECT_TIMEOUT;
- }
- return 0;
+ ret = mei_cl_connect(cl, NULL);
+
+ dev->iamthif_state = MEI_IAMTHIF_IDLE;
+
+ return ret;
}
/**
@@ -137,14 +131,12 @@ int mei_amthif_host_init(struct mei_device *dev)
struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
struct file *file)
{
- struct mei_cl_cb *pos = NULL;
- struct mei_cl_cb *next = NULL;
+ struct mei_cl_cb *cb;
- list_for_each_entry_safe(pos, next,
- &dev->amthif_rd_complete_list.list, list) {
- if (pos->cl && pos->cl == &dev->iamthif_cl &&
- pos->file_object == file)
- return pos;
+ list_for_each_entry(cb, &dev->amthif_rd_complete_list.list, list) {
+ if (cb->cl && cb->cl == &dev->iamthif_cl &&
+ cb->file_object == file)
+ return cb;
}
return NULL;
}
@@ -180,14 +172,13 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
/* Only possible if we are in timeout */
if (!cl || cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "bad file ext.\n");
- return -ETIMEDOUT;
+ return -ETIME;
}
i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
-
if (i < 0) {
dev_dbg(&dev->pdev->dev, "amthif client not found.\n");
- return -ENODEV;
+ return -ENOTTY;
}
dev_dbg(&dev->pdev->dev, "checking amthif data\n");
cb = mei_amthif_find_read_list_entry(dev, file);
@@ -228,7 +219,7 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
dev_dbg(&dev->pdev->dev, "amthif Time out\n");
/* 15 sec for the message has expired */
list_del(&cb->list);
- rets = -ETIMEDOUT;
+ rets = -ETIME;
goto free;
}
}
@@ -253,9 +244,10 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
* the buf_idx may point beyond */
length = min_t(size_t, length, (cb->buf_idx - *offset));
- if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length))
+ if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length)) {
+ dev_dbg(&dev->pdev->dev, "failed to copy data to userland\n");
rets = -EFAULT;
- else {
+ } else {
rets = length;
if ((*offset + length) < cb->buf_idx) {
*offset += length;
@@ -302,9 +294,8 @@ static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb)
if (ret < 0)
return ret;
- if (ret && dev->hbuf_is_ready) {
+ if (ret && mei_hbuf_acquire(dev)) {
ret = 0;
- dev->hbuf_is_ready = false;
if (cb->request_buffer.size > mei_hbuf_max_len(dev)) {
mei_hdr.length = mei_hbuf_max_len(dev);
mei_hdr.msg_complete = 0;
@@ -336,10 +327,6 @@ static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb)
list_add_tail(&cb->list, &dev->write_list.list);
}
} else {
- if (!dev->hbuf_is_ready)
- dev_dbg(&dev->pdev->dev, "host buffer is not empty");
-
- dev_dbg(&dev->pdev->dev, "No flow control credentials, so add iamthif cb to write list.\n");
list_add_tail(&cb->list, &dev->write_list.list);
}
return 0;
@@ -365,7 +352,7 @@ int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *cb)
if (ret)
return ret;
- cb->fop_type = MEI_FOP_IOCTL;
+ cb->fop_type = MEI_FOP_WRITE;
if (!list_empty(&dev->amthif_cmd_list.list) ||
dev->iamthif_state != MEI_IAMTHIF_IDLE) {
@@ -447,23 +434,23 @@ unsigned int mei_amthif_poll(struct mei_device *dev,
/**
- * mei_amthif_irq_write_completed - processes completed iamthif operation.
+ * mei_amthif_irq_write - write iamthif command in irq thread context.
*
* @dev: the device structure.
- * @slots: free slots.
* @cb_pos: callback block.
* @cl: private data of the file object.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise, error.
*/
-int mei_amthif_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list)
+int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev = cl->dev;
struct mei_msg_hdr mei_hdr;
size_t len = dev->iamthif_msg_buf_size - dev->iamthif_msg_buf_index;
u32 msg_slots = mei_data2slots(len);
+ int slots;
int rets;
rets = mei_cl_flow_ctrl_creds(cl);
@@ -480,13 +467,15 @@ int mei_amthif_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
mei_hdr.reserved = 0;
mei_hdr.internal = 0;
- if (*slots >= msg_slots) {
+ slots = mei_hbuf_empty_slots(dev);
+
+ if (slots >= msg_slots) {
mei_hdr.length = len;
mei_hdr.msg_complete = 1;
/* Split the message only if we can write the whole host buffer */
- } else if (*slots == dev->hbuf_depth) {
- msg_slots = *slots;
- len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
+ } else if (slots == dev->hbuf_depth) {
+ msg_slots = slots;
+ len = (slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
mei_hdr.length = len;
mei_hdr.msg_complete = 0;
} else {
@@ -496,7 +485,6 @@ int mei_amthif_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr));
- *slots -= msg_slots;
rets = mei_write_message(dev, &mei_hdr,
dev->iamthif_msg_buf + dev->iamthif_msg_buf_index);
if (rets) {
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 4bc7d620d695..ddc5ac92a200 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -26,7 +26,6 @@
#include <linux/mei_cl_bus.h>
#include "mei_dev.h"
-#include "hw-me.h"
#include "client.h"
#define to_mei_cl_driver(d) container_of(d, struct mei_cl_driver, driver)
@@ -145,9 +144,9 @@ static struct device_type mei_cl_device_type = {
static struct mei_cl *mei_bus_find_mei_cl_by_uuid(struct mei_device *dev,
uuid_le uuid)
{
- struct mei_cl *cl, *next;
+ struct mei_cl *cl;
- list_for_each_entry_safe(cl, next, &dev->device_list, device_link) {
+ list_for_each_entry(cl, &dev->device_list, device_link) {
if (!uuid_le_cmp(uuid, cl->device_uuid))
return cl;
}
@@ -524,6 +523,22 @@ void mei_cl_bus_rx_event(struct mei_cl *cl)
schedule_work(&device->event_work);
}
+void mei_cl_bus_remove_devices(struct mei_device *dev)
+{
+ struct mei_cl *cl, *next;
+
+ mutex_lock(&dev->device_lock);
+ list_for_each_entry_safe(cl, next, &dev->device_list, device_link) {
+ if (cl->device)
+ mei_cl_remove_device(cl->device);
+
+ list_del(&cl->device_link);
+ mei_cl_unlink(cl);
+ kfree(cl);
+ }
+ mutex_unlock(&dev->device_lock);
+}
+
int __init mei_cl_bus_init(void)
{
return bus_register(&mei_cl_bus_type);
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 89a557972d1b..8c078b808cd3 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -29,20 +29,21 @@
* mei_me_cl_by_uuid - locate index of me client
*
* @dev: mei device
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
* returns me client index or -ENOENT if not found
*/
int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *uuid)
{
- int i, res = -ENOENT;
+ int i;
for (i = 0; i < dev->me_clients_num; ++i)
if (uuid_le_cmp(*uuid,
- dev->me_clients[i].props.protocol_name) == 0) {
- res = i;
- break;
- }
+ dev->me_clients[i].props.protocol_name) == 0)
+ return i;
- return res;
+ return -ENOENT;
}
@@ -60,37 +61,79 @@ int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *uuid)
int mei_me_cl_by_id(struct mei_device *dev, u8 client_id)
{
int i;
+
for (i = 0; i < dev->me_clients_num; i++)
if (dev->me_clients[i].client_id == client_id)
- break;
- if (WARN_ON(dev->me_clients[i].client_id != client_id))
- return -ENOENT;
+ return i;
- if (i == dev->me_clients_num)
- return -ENOENT;
-
- return i;
+ return -ENOENT;
}
/**
- * mei_io_list_flush - removes list entry belonging to cl.
+ * mei_cl_cmp_id - tells if the clients are the same
*
- * @list: An instance of our list structure
- * @cl: host client
+ * @cl1: host client 1
+ * @cl2: host client 2
+ *
+ * returns true - if the clients has same host and me ids
+ * false - otherwise
+ */
+static inline bool mei_cl_cmp_id(const struct mei_cl *cl1,
+ const struct mei_cl *cl2)
+{
+ return cl1 && cl2 &&
+ (cl1->host_client_id == cl2->host_client_id) &&
+ (cl1->me_client_id == cl2->me_client_id);
+}
+
+/**
+ * mei_io_list_flush - removes cbs belonging to cl.
+ *
+ * @list: an instance of our list structure
+ * @cl: host client, can be NULL for flushing the whole list
+ * @free: whether to free the cbs
*/
-void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl)
+static void __mei_io_list_flush(struct mei_cl_cb *list,
+ struct mei_cl *cl, bool free)
{
struct mei_cl_cb *cb;
struct mei_cl_cb *next;
+ /* enable removing everything if no cl is specified */
list_for_each_entry_safe(cb, next, &list->list, list) {
- if (cb->cl && mei_cl_cmp_id(cl, cb->cl))
+ if (!cl || (cb->cl && mei_cl_cmp_id(cl, cb->cl))) {
list_del(&cb->list);
+ if (free)
+ mei_io_cb_free(cb);
+ }
}
}
/**
+ * mei_io_list_flush - removes list entry belonging to cl.
+ *
+ * @list: An instance of our list structure
+ * @cl: host client
+ */
+static inline void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl)
+{
+ __mei_io_list_flush(list, cl, false);
+}
+
+
+/**
+ * mei_io_list_free - removes cb belonging to cl and free them
+ *
+ * @list: An instance of our list structure
+ * @cl: host client
+ */
+static inline void mei_io_list_free(struct mei_cl_cb *list, struct mei_cl *cl)
+{
+ __mei_io_list_flush(list, cl, true);
+}
+
+/**
* mei_io_cb_free - free mei_cb_private related memory
*
* @cb: mei callback struct
@@ -196,8 +239,8 @@ int mei_cl_flush_queues(struct mei_cl *cl)
cl_dbg(dev, cl, "remove list entry belonging to cl\n");
mei_io_list_flush(&cl->dev->read_list, cl);
- mei_io_list_flush(&cl->dev->write_list, cl);
- mei_io_list_flush(&cl->dev->write_waiting_list, cl);
+ mei_io_list_free(&cl->dev->write_list, cl);
+ mei_io_list_free(&cl->dev->write_waiting_list, cl);
mei_io_list_flush(&cl->dev->ctrl_wr_list, cl);
mei_io_list_flush(&cl->dev->ctrl_rd_list, cl);
mei_io_list_flush(&cl->dev->amthif_cmd_list, cl);
@@ -254,10 +297,9 @@ struct mei_cl *mei_cl_allocate(struct mei_device *dev)
struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl)
{
struct mei_device *dev = cl->dev;
- struct mei_cl_cb *cb = NULL;
- struct mei_cl_cb *next = NULL;
+ struct mei_cl_cb *cb;
- list_for_each_entry_safe(cb, next, &dev->read_list.list, list)
+ list_for_each_entry(cb, &dev->read_list.list, list)
if (mei_cl_cmp_id(cl, cb->cl))
return cb;
return NULL;
@@ -375,6 +417,23 @@ void mei_host_client_init(struct work_struct *work)
mutex_unlock(&dev->device_lock);
}
+/**
+ * mei_hbuf_acquire: try to acquire host buffer
+ *
+ * @dev: the device structure
+ * returns true if host buffer was acquired
+ */
+bool mei_hbuf_acquire(struct mei_device *dev)
+{
+ if (!dev->hbuf_is_ready) {
+ dev_dbg(&dev->pdev->dev, "hbuf is not ready\n");
+ return false;
+ }
+
+ dev->hbuf_is_ready = false;
+
+ return true;
+}
/**
* mei_cl_disconnect - disconnect host client from the me one
@@ -406,8 +465,7 @@ int mei_cl_disconnect(struct mei_cl *cl)
return -ENOMEM;
cb->fop_type = MEI_FOP_CLOSE;
- if (dev->hbuf_is_ready) {
- dev->hbuf_is_ready = false;
+ if (mei_hbuf_acquire(dev)) {
if (mei_hbm_cl_disconnect_req(dev, cl)) {
rets = -ENODEV;
cl_err(dev, cl, "failed to disconnect.\n");
@@ -461,17 +519,17 @@ free:
bool mei_cl_is_other_connecting(struct mei_cl *cl)
{
struct mei_device *dev;
- struct mei_cl *pos;
- struct mei_cl *next;
+ struct mei_cl *ocl; /* the other client */
if (WARN_ON(!cl || !cl->dev))
return false;
dev = cl->dev;
- list_for_each_entry_safe(pos, next, &dev->file_list, link) {
- if ((pos->state == MEI_FILE_CONNECTING) &&
- (pos != cl) && cl->me_client_id == pos->me_client_id)
+ list_for_each_entry(ocl, &dev->file_list, link) {
+ if (ocl->state == MEI_FILE_CONNECTING &&
+ ocl != cl &&
+ cl->me_client_id == ocl->me_client_id)
return true;
}
@@ -505,11 +563,10 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file)
goto out;
}
- cb->fop_type = MEI_FOP_IOCTL;
-
- if (dev->hbuf_is_ready && !mei_cl_is_other_connecting(cl)) {
- dev->hbuf_is_ready = false;
+ cb->fop_type = MEI_FOP_CONNECT;
+ /* run hbuf acquire last so we don't have to undo */
+ if (!mei_cl_is_other_connecting(cl) && mei_hbuf_acquire(dev)) {
if (mei_hbm_cl_connect_req(dev, cl)) {
rets = -ENODEV;
goto out;
@@ -521,18 +578,19 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file)
}
mutex_unlock(&dev->device_lock);
- rets = wait_event_timeout(dev->wait_recvd_msg,
- (cl->state == MEI_FILE_CONNECTED ||
- cl->state == MEI_FILE_DISCONNECTED),
- mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+ wait_event_timeout(dev->wait_recvd_msg,
+ (cl->state == MEI_FILE_CONNECTED ||
+ cl->state == MEI_FILE_DISCONNECTED),
+ mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
mutex_lock(&dev->device_lock);
if (cl->state != MEI_FILE_CONNECTED) {
- rets = -EFAULT;
+ /* something went really wrong */
+ if (!cl->status)
+ cl->status = -EFAULT;
mei_io_list_flush(&dev->ctrl_rd_list, cl);
mei_io_list_flush(&dev->ctrl_wr_list, cl);
- goto out;
}
rets = cl->status;
@@ -554,7 +612,8 @@ out:
int mei_cl_flow_ctrl_creds(struct mei_cl *cl)
{
struct mei_device *dev;
- int i;
+ struct mei_me_client *me_cl;
+ int id;
if (WARN_ON(!cl || !cl->dev))
return -EINVAL;
@@ -567,19 +626,19 @@ int mei_cl_flow_ctrl_creds(struct mei_cl *cl)
if (cl->mei_flow_ctrl_creds > 0)
return 1;
- for (i = 0; i < dev->me_clients_num; i++) {
- struct mei_me_client *me_cl = &dev->me_clients[i];
- if (me_cl->client_id == cl->me_client_id) {
- if (me_cl->mei_flow_ctrl_creds) {
- if (WARN_ON(me_cl->props.single_recv_buf == 0))
- return -EINVAL;
- return 1;
- } else {
- return 0;
- }
- }
+ id = mei_me_cl_by_id(dev, cl->me_client_id);
+ if (id < 0) {
+ cl_err(dev, cl, "no such me client %d\n", cl->me_client_id);
+ return id;
}
- return -ENOENT;
+
+ me_cl = &dev->me_clients[id];
+ if (me_cl->mei_flow_ctrl_creds) {
+ if (WARN_ON(me_cl->props.single_recv_buf == 0))
+ return -EINVAL;
+ return 1;
+ }
+ return 0;
}
/**
@@ -595,32 +654,31 @@ int mei_cl_flow_ctrl_creds(struct mei_cl *cl)
int mei_cl_flow_ctrl_reduce(struct mei_cl *cl)
{
struct mei_device *dev;
- int i;
+ struct mei_me_client *me_cl;
+ int id;
if (WARN_ON(!cl || !cl->dev))
return -EINVAL;
dev = cl->dev;
- if (!dev->me_clients_num)
- return -ENOENT;
+ id = mei_me_cl_by_id(dev, cl->me_client_id);
+ if (id < 0) {
+ cl_err(dev, cl, "no such me client %d\n", cl->me_client_id);
+ return id;
+ }
- for (i = 0; i < dev->me_clients_num; i++) {
- struct mei_me_client *me_cl = &dev->me_clients[i];
- if (me_cl->client_id == cl->me_client_id) {
- if (me_cl->props.single_recv_buf != 0) {
- if (WARN_ON(me_cl->mei_flow_ctrl_creds <= 0))
- return -EINVAL;
- dev->me_clients[i].mei_flow_ctrl_creds--;
- } else {
- if (WARN_ON(cl->mei_flow_ctrl_creds <= 0))
- return -EINVAL;
- cl->mei_flow_ctrl_creds--;
- }
- return 0;
- }
+ me_cl = &dev->me_clients[id];
+ if (me_cl->props.single_recv_buf != 0) {
+ if (WARN_ON(me_cl->mei_flow_ctrl_creds <= 0))
+ return -EINVAL;
+ me_cl->mei_flow_ctrl_creds--;
+ } else {
+ if (WARN_ON(cl->mei_flow_ctrl_creds <= 0))
+ return -EINVAL;
+ cl->mei_flow_ctrl_creds--;
}
- return -ENOENT;
+ return 0;
}
/**
@@ -652,7 +710,7 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length)
i = mei_me_cl_by_id(dev, cl->me_client_id);
if (i < 0) {
cl_err(dev, cl, "no such me client %d\n", cl->me_client_id);
- return -ENODEV;
+ return -ENOTTY;
}
cb = mei_io_cb_init(cl, NULL);
@@ -666,8 +724,7 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length)
goto err;
cb->fop_type = MEI_FOP_READ;
- if (dev->hbuf_is_ready) {
- dev->hbuf_is_ready = false;
+ if (mei_hbuf_acquire(dev)) {
if (mei_hbm_cl_flow_control_req(dev, cl)) {
cl_err(dev, cl, "flow control send failed\n");
rets = -ENODEV;
@@ -687,27 +744,26 @@ err:
}
/**
- * mei_cl_irq_write_complete - write a message to device
+ * mei_cl_irq_write - write a message to device
* from the interrupt thread context
*
* @cl: client
* @cb: callback block.
- * @slots: free slots.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise error.
*/
-int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list)
+int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev;
struct mei_msg_data *buf;
struct mei_msg_hdr mei_hdr;
size_t len;
u32 msg_slots;
+ int slots;
int rets;
-
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
@@ -724,6 +780,7 @@ int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
return 0;
}
+ slots = mei_hbuf_empty_slots(dev);
len = buf->size - cb->buf_idx;
msg_slots = mei_data2slots(len);
@@ -732,13 +789,13 @@ int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
mei_hdr.reserved = 0;
mei_hdr.internal = cb->internal;
- if (*slots >= msg_slots) {
+ if (slots >= msg_slots) {
mei_hdr.length = len;
mei_hdr.msg_complete = 1;
/* Split the message only if we can write the whole host buffer */
- } else if (*slots == dev->hbuf_depth) {
- msg_slots = *slots;
- len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
+ } else if (slots == dev->hbuf_depth) {
+ msg_slots = slots;
+ len = (slots * sizeof(u32)) - sizeof(struct mei_msg_hdr);
mei_hdr.length = len;
mei_hdr.msg_complete = 0;
} else {
@@ -749,7 +806,6 @@ int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
cl_dbg(dev, cl, "buf: size = %d idx = %lu\n",
cb->request_buffer.size, cb->buf_idx);
- *slots -= msg_slots;
rets = mei_write_message(dev, &mei_hdr, buf->data + cb->buf_idx);
if (rets) {
cl->status = rets;
@@ -802,21 +858,29 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
cb->fop_type = MEI_FOP_WRITE;
+ cb->buf_idx = 0;
+ cl->writing_state = MEI_IDLE;
+
+ mei_hdr.host_addr = cl->host_client_id;
+ mei_hdr.me_addr = cl->me_client_id;
+ mei_hdr.reserved = 0;
+ mei_hdr.msg_complete = 0;
+ mei_hdr.internal = cb->internal;
rets = mei_cl_flow_ctrl_creds(cl);
if (rets < 0)
goto err;
- /* Host buffer is not ready, we queue the request */
- if (rets == 0 || !dev->hbuf_is_ready) {
- cb->buf_idx = 0;
- /* unseting complete will enqueue the cb for write */
- mei_hdr.msg_complete = 0;
+ if (rets == 0) {
+ cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
+ rets = buf->size;
+ goto out;
+ }
+ if (!mei_hbuf_acquire(dev)) {
+ cl_dbg(dev, cl, "Cannot acquire the host buffer: not sending.\n");
rets = buf->size;
goto out;
}
-
- dev->hbuf_is_ready = false;
/* Check for a maximum length */
if (buf->size > mei_hbuf_max_len(dev)) {
@@ -827,12 +891,6 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
mei_hdr.msg_complete = 1;
}
- mei_hdr.host_addr = cl->host_client_id;
- mei_hdr.me_addr = cl->me_client_id;
- mei_hdr.reserved = 0;
- mei_hdr.internal = cb->internal;
-
-
rets = mei_write_message(dev, &mei_hdr, buf->data);
if (rets)
goto err;
@@ -840,13 +898,12 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
cl->writing_state = MEI_WRITING;
cb->buf_idx = mei_hdr.length;
- rets = buf->size;
out:
if (mei_hdr.msg_complete) {
- if (mei_cl_flow_ctrl_reduce(cl)) {
- rets = -ENODEV;
+ rets = mei_cl_flow_ctrl_reduce(cl);
+ if (rets < 0)
goto err;
- }
+
list_add_tail(&cb->list, &dev->write_waiting_list.list);
} else {
list_add_tail(&cb->list, &dev->write_list.list);
@@ -856,15 +913,18 @@ out:
if (blocking && cl->writing_state != MEI_WRITE_COMPLETE) {
mutex_unlock(&dev->device_lock);
- if (wait_event_interruptible(cl->tx_wait,
- cl->writing_state == MEI_WRITE_COMPLETE)) {
- if (signal_pending(current))
- rets = -EINTR;
- else
- rets = -ERESTARTSYS;
- }
+ rets = wait_event_interruptible(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE);
mutex_lock(&dev->device_lock);
+ /* wait_event_interruptible returns -ERESTARTSYS */
+ if (rets) {
+ if (signal_pending(current))
+ rets = -EINTR;
+ goto err;
+ }
}
+
+ rets = buf->size;
err:
return rets;
}
@@ -905,9 +965,9 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb)
void mei_cl_all_disconnect(struct mei_device *dev)
{
- struct mei_cl *cl, *next;
+ struct mei_cl *cl;
- list_for_each_entry_safe(cl, next, &dev->file_list, link) {
+ list_for_each_entry(cl, &dev->file_list, link) {
cl->state = MEI_FILE_DISCONNECTED;
cl->mei_flow_ctrl_creds = 0;
cl->timer_count = 0;
@@ -922,8 +982,8 @@ void mei_cl_all_disconnect(struct mei_device *dev)
*/
void mei_cl_all_wakeup(struct mei_device *dev)
{
- struct mei_cl *cl, *next;
- list_for_each_entry_safe(cl, next, &dev->file_list, link) {
+ struct mei_cl *cl;
+ list_for_each_entry(cl, &dev->file_list, link) {
if (waitqueue_active(&cl->rx_wait)) {
cl_dbg(dev, cl, "Waking up reading client!\n");
wake_up_interruptible(&cl->rx_wait);
@@ -942,20 +1002,8 @@ void mei_cl_all_wakeup(struct mei_device *dev)
*/
void mei_cl_all_write_clear(struct mei_device *dev)
{
- struct mei_cl_cb *cb, *next;
- struct list_head *list;
-
- list = &dev->write_list.list;
- list_for_each_entry_safe(cb, next, list, list) {
- list_del(&cb->list);
- mei_io_cb_free(cb);
- }
-
- list = &dev->write_waiting_list.list;
- list_for_each_entry_safe(cb, next, list, list) {
- list_del(&cb->list);
- mei_io_cb_free(cb);
- }
+ mei_io_list_free(&dev->write_list, NULL);
+ mei_io_list_free(&dev->write_waiting_list, NULL);
}
diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h
index c8396e582f1c..96d5de0389f9 100644
--- a/drivers/misc/mei/client.h
+++ b/drivers/misc/mei/client.h
@@ -45,8 +45,6 @@ static inline void mei_io_list_init(struct mei_cl_cb *list)
{
INIT_LIST_HEAD(&list->list);
}
-void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl);
-
/*
* MEI Host Client Functions
*/
@@ -61,22 +59,6 @@ int mei_cl_unlink(struct mei_cl *cl);
int mei_cl_flush_queues(struct mei_cl *cl);
struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl);
-/**
- * mei_cl_cmp_id - tells if file private data have same id
- *
- * @fe1: private data of 1. file object
- * @fe2: private data of 2. file object
- *
- * returns true - if ids are the same and not NULL
- */
-static inline bool mei_cl_cmp_id(const struct mei_cl *cl1,
- const struct mei_cl *cl2)
-{
- return cl1 && cl2 &&
- (cl1->host_client_id == cl2->host_client_id) &&
- (cl1->me_client_id == cl2->me_client_id);
-}
-
int mei_cl_flow_ctrl_creds(struct mei_cl *cl);
@@ -86,15 +68,15 @@ int mei_cl_flow_ctrl_reduce(struct mei_cl *cl);
*/
static inline bool mei_cl_is_connected(struct mei_cl *cl)
{
- return (cl->dev &&
+ return cl->dev &&
cl->dev->dev_state == MEI_DEV_ENABLED &&
- cl->state == MEI_FILE_CONNECTED);
+ cl->state == MEI_FILE_CONNECTED;
}
static inline bool mei_cl_is_transitioning(struct mei_cl *cl)
{
- return (MEI_FILE_INITIALIZING == cl->state ||
+ return MEI_FILE_INITIALIZING == cl->state ||
MEI_FILE_DISCONNECTED == cl->state ||
- MEI_FILE_DISCONNECTING == cl->state);
+ MEI_FILE_DISCONNECTING == cl->state;
}
bool mei_cl_is_other_connecting(struct mei_cl *cl);
@@ -102,8 +84,8 @@ int mei_cl_disconnect(struct mei_cl *cl);
int mei_cl_connect(struct mei_cl *cl, struct file *file);
int mei_cl_read_start(struct mei_cl *cl, size_t length);
int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking);
-int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list);
+int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list);
void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb);
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
index a3ae154444b2..ced5b777c70f 100644
--- a/drivers/misc/mei/debugfs.c
+++ b/drivers/misc/mei/debugfs.c
@@ -75,6 +75,54 @@ static const struct file_operations mei_dbgfs_fops_meclients = {
.llseek = generic_file_llseek,
};
+static ssize_t mei_dbgfs_read_active(struct file *fp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ struct mei_device *dev = fp->private_data;
+ struct mei_cl *cl;
+ const size_t bufsz = 1024;
+ char *buf;
+ int i = 0;
+ int pos = 0;
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ " |me|host|state|rd|wr|\n");
+
+ mutex_lock(&dev->device_lock);
+
+ /* if the driver is not enabled the list won't b consitent */
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
+ list_for_each_entry(cl, &dev->file_list, link) {
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "%2d|%2d|%4d|%5d|%2d|%2d|\n",
+ i, cl->me_client_id, cl->host_client_id, cl->state,
+ cl->reading_state, cl->writing_state);
+ i++;
+ }
+out:
+ mutex_unlock(&dev->device_lock);
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations mei_dbgfs_fops_active = {
+ .open = simple_open,
+ .read = mei_dbgfs_read_active,
+ .llseek = generic_file_llseek,
+};
+
static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf,
size_t cnt, loff_t *ppos)
{
@@ -128,6 +176,12 @@ int mei_dbgfs_register(struct mei_device *dev, const char *name)
dev_err(&dev->pdev->dev, "meclients: registration failed\n");
goto err;
}
+ f = debugfs_create_file("active", S_IRUSR, dir,
+ dev, &mei_dbgfs_fops_active);
+ if (!f) {
+ dev_err(&dev->pdev->dev, "meclients: registration failed\n");
+ goto err;
+ }
f = debugfs_create_file("devstate", S_IRUSR, dir,
dev, &mei_dbgfs_fops_devstate);
if (!f) {
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 28cd74c073b9..4960288e543a 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -21,7 +21,41 @@
#include "mei_dev.h"
#include "hbm.h"
-#include "hw-me.h"
+#include "client.h"
+
+static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status)
+{
+#define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status
+ switch (status) {
+ MEI_CL_CS(SUCCESS);
+ MEI_CL_CS(NOT_FOUND);
+ MEI_CL_CS(ALREADY_STARTED);
+ MEI_CL_CS(OUT_OF_RESOURCES);
+ MEI_CL_CS(MESSAGE_SMALL);
+ default: return "unknown";
+ }
+#undef MEI_CL_CCS
+}
+
+/**
+ * mei_cl_conn_status_to_errno - convert client connect response
+ * status to error code
+ *
+ * @status: client connect response status
+ *
+ * returns corresponding error code
+ */
+static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status)
+{
+ switch (status) {
+ case MEI_CL_CONN_SUCCESS: return 0;
+ case MEI_CL_CONN_NOT_FOUND: return -ENOTTY;
+ case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY;
+ case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY;
+ case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL;
+ default: return -EINVAL;
+ }
+}
/**
* mei_hbm_me_cl_allocate - allocates storage for me clients
@@ -100,33 +134,6 @@ bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf)
/**
- * is_treat_specially_client - checks if the message belongs
- * to the file private data.
- *
- * @cl: private data of the file object
- * @rs: connect response bus message
- *
- */
-static bool is_treat_specially_client(struct mei_cl *cl,
- struct hbm_client_connect_response *rs)
-{
- if (mei_hbm_cl_addr_equal(cl, rs)) {
- if (!rs->status) {
- cl->state = MEI_FILE_CONNECTED;
- cl->status = 0;
-
- } else {
- cl->state = MEI_FILE_DISCONNECTED;
- cl->status = -ENODEV;
- }
- cl->timer_count = 0;
-
- return true;
- }
- return false;
-}
-
-/**
* mei_hbm_idle - set hbm to idle state
*
* @dev: the device structure
@@ -147,13 +154,13 @@ int mei_hbm_start_wait(struct mei_device *dev)
ret = wait_event_interruptible_timeout(dev->wait_recvd_msg,
dev->hbm_state == MEI_HBM_IDLE ||
dev->hbm_state >= MEI_HBM_STARTED,
- mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
+ mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
mutex_lock(&dev->device_lock);
if (ret <= 0 && (dev->hbm_state <= MEI_HBM_START)) {
dev->hbm_state = MEI_HBM_IDLE;
dev_err(&dev->pdev->dev, "waiting for mei start failed\n");
- return -ETIMEDOUT;
+ return -ETIME;
}
return 0;
}
@@ -283,17 +290,18 @@ static int mei_hbm_prop_req(struct mei_device *dev)
}
/**
- * mei_hbm_stop_req_prepare - prepare stop request message
+ * mei_hbm_stop_req - send stop request message
*
* @dev - mei device
- * @mei_hdr - mei message header
- * @data - hbm message body buffer
+ * @cl: client info
+ *
+ * This function returns -EIO on write failure
*/
-static void mei_hbm_stop_req_prepare(struct mei_device *dev,
- struct mei_msg_hdr *mei_hdr, unsigned char *data)
+static int mei_hbm_stop_req(struct mei_device *dev)
{
+ struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
struct hbm_host_stop_request *req =
- (struct hbm_host_stop_request *)data;
+ (struct hbm_host_stop_request *)dev->wr_msg.data;
const size_t len = sizeof(struct hbm_host_stop_request);
mei_hbm_hdr(mei_hdr, len);
@@ -301,6 +309,8 @@ static void mei_hbm_stop_req_prepare(struct mei_device *dev,
memset(req, 0, len);
req->hbm_cmd = HOST_STOP_REQ_CMD;
req->reason = DRIVER_STOP_REQUEST;
+
+ return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
}
/**
@@ -319,8 +329,7 @@ int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl)
mei_hbm_hdr(mei_hdr, len);
mei_hbm_cl_hdr(cl, MEI_FLOW_CONTROL_CMD, dev->wr_msg.data, len);
- dev_dbg(&dev->pdev->dev, "sending flow control host client = %d, ME client = %d\n",
- cl->host_client_id, cl->me_client_id);
+ cl_dbg(dev, cl, "sending flow control\n");
return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
}
@@ -330,27 +339,34 @@ int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl)
*
* @dev: the device structure
* @flow: flow control.
+ *
+ * return 0 on success, < 0 otherwise
*/
-static void mei_hbm_add_single_flow_creds(struct mei_device *dev,
+static int mei_hbm_add_single_flow_creds(struct mei_device *dev,
struct hbm_flow_control *flow)
{
- struct mei_me_client *client;
- int i;
-
- for (i = 0; i < dev->me_clients_num; i++) {
- client = &dev->me_clients[i];
- if (client && flow->me_addr == client->client_id) {
- if (client->props.single_recv_buf) {
- client->mei_flow_ctrl_creds++;
- dev_dbg(&dev->pdev->dev, "recv flow ctrl msg ME %d (single).\n",
- flow->me_addr);
- dev_dbg(&dev->pdev->dev, "flow control credentials =%d.\n",
- client->mei_flow_ctrl_creds);
- } else {
- BUG(); /* error in flow control */
- }
- }
+ struct mei_me_client *me_cl;
+ int id;
+
+ id = mei_me_cl_by_id(dev, flow->me_addr);
+ if (id < 0) {
+ dev_err(&dev->pdev->dev, "no such me client %d\n",
+ flow->me_addr);
+ return id;
}
+
+ me_cl = &dev->me_clients[id];
+ if (me_cl->props.single_recv_buf) {
+ me_cl->mei_flow_ctrl_creds++;
+ dev_dbg(&dev->pdev->dev, "recv flow ctrl msg ME %d (single).\n",
+ flow->me_addr);
+ dev_dbg(&dev->pdev->dev, "flow control credentials =%d.\n",
+ me_cl->mei_flow_ctrl_creds);
+ } else {
+ BUG(); /* error in flow control */
+ }
+
+ return 0;
}
/**
@@ -362,8 +378,7 @@ static void mei_hbm_add_single_flow_creds(struct mei_device *dev,
static void mei_hbm_cl_flow_control_res(struct mei_device *dev,
struct hbm_flow_control *flow_control)
{
- struct mei_cl *cl = NULL;
- struct mei_cl *next = NULL;
+ struct mei_cl *cl;
if (!flow_control->host_addr) {
/* single receive buffer */
@@ -372,7 +387,7 @@ static void mei_hbm_cl_flow_control_res(struct mei_device *dev,
}
/* normal connection */
- list_for_each_entry_safe(cl, next, &dev->file_list, link) {
+ list_for_each_entry(cl, &dev->file_list, link) {
if (mei_hbm_cl_addr_equal(cl, flow_control)) {
cl->mei_flow_ctrl_creds++;
dev_dbg(&dev->pdev->dev, "flow ctrl msg for host %d ME %d.\n",
@@ -405,6 +420,25 @@ int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl)
}
/**
+ * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW
+ *
+ * @dev: the device structure
+ * @cl: a client to disconnect from
+ *
+ * This function returns -EIO on write failure
+ */
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
+ const size_t len = sizeof(struct hbm_client_connect_response);
+
+ mei_hbm_hdr(mei_hdr, len);
+ mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD, dev->wr_msg.data, len);
+
+ return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
+}
+
+/**
* mei_hbm_cl_disconnect_res - disconnect response from ME
*
* @dev: the device structure
@@ -414,29 +448,23 @@ static void mei_hbm_cl_disconnect_res(struct mei_device *dev,
struct hbm_client_connect_response *rs)
{
struct mei_cl *cl;
- struct mei_cl_cb *pos = NULL, *next = NULL;
-
- dev_dbg(&dev->pdev->dev,
- "disconnect_response:\n"
- "ME Client = %d\n"
- "Host Client = %d\n"
- "Status = %d\n",
- rs->me_addr,
- rs->host_addr,
- rs->status);
-
- list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) {
- cl = pos->cl;
-
- if (!cl) {
- list_del(&pos->list);
+ struct mei_cl_cb *cb, *next;
+
+ dev_dbg(&dev->pdev->dev, "hbm: disconnect response cl:host=%02d me=%02d status=%d\n",
+ rs->me_addr, rs->host_addr, rs->status);
+
+ list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) {
+ cl = cb->cl;
+
+ /* this should not happen */
+ if (WARN_ON(!cl)) {
+ list_del(&cb->list);
return;
}
- dev_dbg(&dev->pdev->dev, "list_for_each_entry_safe in ctrl_rd_list.\n");
if (mei_hbm_cl_addr_equal(cl, rs)) {
- list_del(&pos->list);
- if (!rs->status)
+ list_del(&cb->list);
+ if (rs->status == MEI_CL_DISCONN_SUCCESS)
cl->state = MEI_FILE_DISCONNECTED;
cl->status = 0;
@@ -476,46 +504,41 @@ static void mei_hbm_cl_connect_res(struct mei_device *dev,
{
struct mei_cl *cl;
- struct mei_cl_cb *pos = NULL, *next = NULL;
+ struct mei_cl_cb *cb, *next;
- dev_dbg(&dev->pdev->dev,
- "connect_response:\n"
- "ME Client = %d\n"
- "Host Client = %d\n"
- "Status = %d\n",
- rs->me_addr,
- rs->host_addr,
- rs->status);
+ dev_dbg(&dev->pdev->dev, "hbm: connect response cl:host=%02d me=%02d status=%s\n",
+ rs->me_addr, rs->host_addr,
+ mei_cl_conn_status_str(rs->status));
- /* if WD or iamthif client treat specially */
+ cl = NULL;
- if (is_treat_specially_client(&dev->wd_cl, rs)) {
- dev_dbg(&dev->pdev->dev, "successfully connected to WD client.\n");
- mei_watchdog_register(dev);
+ list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list.list, list) {
- return;
- }
+ cl = cb->cl;
+ /* this should not happen */
+ if (WARN_ON(!cl)) {
+ list_del_init(&cb->list);
+ continue;
+ }
- if (is_treat_specially_client(&dev->iamthif_cl, rs)) {
- dev->iamthif_state = MEI_IAMTHIF_IDLE;
- return;
- }
- list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) {
+ if (cb->fop_type != MEI_FOP_CONNECT)
+ continue;
- cl = pos->cl;
- if (!cl) {
- list_del(&pos->list);
- return;
- }
- if (pos->fop_type == MEI_FOP_IOCTL) {
- if (is_treat_specially_client(cl, rs)) {
- list_del(&pos->list);
- cl->status = 0;
- cl->timer_count = 0;
- break;
- }
+ if (mei_hbm_cl_addr_equal(cl, rs)) {
+ list_del(&cb->list);
+ break;
}
}
+
+ if (!cl)
+ return;
+
+ cl->timer_count = 0;
+ if (rs->status == MEI_CL_CONN_SUCCESS)
+ cl->state = MEI_FILE_CONNECTED;
+ else
+ cl->state = MEI_FILE_DISCONNECTED;
+ cl->status = mei_cl_conn_status_to_errno(rs->status);
}
@@ -525,32 +548,34 @@ static void mei_hbm_cl_connect_res(struct mei_device *dev,
*
* @dev: the device structure.
* @disconnect_req: disconnect request bus message from the me
+ *
+ * returns -ENOMEM on allocation failure
*/
-static void mei_hbm_fw_disconnect_req(struct mei_device *dev,
+static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
struct hbm_client_connect_request *disconnect_req)
{
- struct mei_cl *cl, *next;
- const size_t len = sizeof(struct hbm_client_connect_response);
+ struct mei_cl *cl;
+ struct mei_cl_cb *cb;
- list_for_each_entry_safe(cl, next, &dev->file_list, link) {
+ list_for_each_entry(cl, &dev->file_list, link) {
if (mei_hbm_cl_addr_equal(cl, disconnect_req)) {
dev_dbg(&dev->pdev->dev, "disconnect request host client %d ME client %d.\n",
disconnect_req->host_addr,
disconnect_req->me_addr);
cl->state = MEI_FILE_DISCONNECTED;
cl->timer_count = 0;
- if (cl == &dev->wd_cl)
- dev->wd_pending = false;
- else if (cl == &dev->iamthif_cl)
- dev->iamthif_timer = 0;
-
- /* prepare disconnect response */
- mei_hbm_hdr(&dev->wr_ext_msg.hdr, len);
- mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD,
- dev->wr_ext_msg.data, len);
+
+ cb = mei_io_cb_init(cl, NULL);
+ if (!cb)
+ return -ENOMEM;
+ cb->fop_type = MEI_FOP_DISCONNECT_RSP;
+ cl_dbg(dev, cl, "add disconnect response as first\n");
+ list_add(&cb->list, &dev->ctrl_wr_list.list);
+
break;
}
}
+ return 0;
}
@@ -629,10 +654,7 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
dev_warn(&dev->pdev->dev, "hbm: start: version mismatch - stopping the driver.\n");
dev->hbm_state = MEI_HBM_STOPPED;
- mei_hbm_stop_req_prepare(dev, &dev->wr_msg.hdr,
- dev->wr_msg.data);
- if (mei_write_message(dev, &dev->wr_msg.hdr,
- dev->wr_msg.data)) {
+ if (mei_hbm_stop_req(dev)) {
dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n");
return -EIO;
}
@@ -778,10 +800,11 @@ int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
case ME_STOP_REQ_CMD:
dev_dbg(&dev->pdev->dev, "hbm: stop request: message received\n");
-
dev->hbm_state = MEI_HBM_STOPPED;
- mei_hbm_stop_req_prepare(dev, &dev->wr_ext_msg.hdr,
- dev->wr_ext_msg.data);
+ if (mei_hbm_stop_req(dev)) {
+ dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n");
+ return -EIO;
+ }
break;
default:
BUG();
diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h
index 5f92188a5cd7..20e8782711c0 100644
--- a/drivers/misc/mei/hbm.h
+++ b/drivers/misc/mei/hbm.h
@@ -54,6 +54,7 @@ int mei_hbm_start_req(struct mei_device *dev);
int mei_hbm_start_wait(struct mei_device *dev);
int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl);
int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl);
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl);
int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl);
bool mei_hbm_version_is_supported(struct mei_device *dev);
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 6f656c053b14..8dbdaaef1af5 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -20,10 +20,10 @@
#include <linux/interrupt.h>
#include "mei_dev.h"
-#include "hw-me.h"
-
#include "hbm.h"
+#include "hw-me.h"
+#include "hw-me-regs.h"
/**
* mei_me_reg_read - Reads 32bit data from the mei device
@@ -240,11 +240,11 @@ static int mei_me_hw_ready_wait(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
err = wait_event_interruptible_timeout(dev->wait_hw_ready,
dev->recvd_hw_ready,
- mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
+ mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
mutex_lock(&dev->device_lock);
if (!err && !dev->recvd_hw_ready) {
if (!err)
- err = -ETIMEDOUT;
+ err = -ETIME;
dev_err(&dev->pdev->dev,
"wait hw ready failed. status = %d\n", err);
return err;
@@ -303,7 +303,7 @@ static bool mei_me_hbuf_is_empty(struct mei_device *dev)
*
* @dev: the device structure
*
- * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count
+ * returns -EOVERFLOW if overflow, otherwise empty slots count
*/
static int mei_me_hbuf_empty_slots(struct mei_device *dev)
{
@@ -326,7 +326,7 @@ static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
/**
- * mei_write_message - writes a message to mei device.
+ * mei_me_write_message - writes a message to mei device.
*
* @dev: the device structure
* @header: mei HECI header of message
@@ -354,7 +354,7 @@ static int mei_me_write_message(struct mei_device *dev,
dw_cnt = mei_data2slots(length);
if (empty_slots < 0 || dw_cnt > empty_slots)
- return -EIO;
+ return -EMSGSIZE;
mei_me_reg_write(hw, H_CB_WW, *((u32 *) header));
@@ -381,7 +381,7 @@ static int mei_me_write_message(struct mei_device *dev,
*
* @dev: the device structure
*
- * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count
+ * returns -EOVERFLOW if overflow, otherwise filled slots count
*/
static int mei_me_count_full_read_slots(struct mei_device *dev)
{
@@ -505,17 +505,25 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
/* check slots available for reading */
slots = mei_count_full_read_slots(dev);
while (slots > 0) {
- /* we have urgent data to send so break the read */
- if (dev->wr_ext_msg.hdr.length)
- break;
dev_dbg(&dev->pdev->dev, "slots to read = %08x\n", slots);
rets = mei_irq_read_handler(dev, &complete_list, &slots);
+ /* There is a race between ME write and interrupt delivery:
+ * Not all data is always available immediately after the
+ * interrupt, so try to read again on the next interrupt.
+ */
+ if (rets == -ENODATA)
+ break;
+
if (rets && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_err(&dev->pdev->dev, "mei_irq_read_handler ret = %d.\n",
+ rets);
schedule_work(&dev->reset_work);
goto end;
}
}
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+
rets = mei_irq_write_handler(dev, &complete_list);
dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
diff --git a/drivers/misc/mei/hw-txe-regs.h b/drivers/misc/mei/hw-txe-regs.h
new file mode 100644
index 000000000000..7283c24c1af1
--- /dev/null
+++ b/drivers/misc/mei/hw-txe-regs.h
@@ -0,0 +1,294 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef _MEI_HW_TXE_REGS_H_
+#define _MEI_HW_TXE_REGS_H_
+
+#include "hw.h"
+
+#define SEC_ALIVENESS_TIMER_TIMEOUT (5 * MSEC_PER_SEC)
+#define SEC_ALIVENESS_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_RESET_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_READY_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define START_MESSAGE_RESPONSE_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define RESET_CANCEL_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+
+enum {
+ SEC_BAR,
+ BRIDGE_BAR,
+
+ NUM_OF_MEM_BARS
+};
+
+/* SeC FW Status Register
+ *
+ * FW uses this register in order to report its status to host.
+ * This register resides in PCI-E config space.
+ */
+#define PCI_CFG_TXE_FW_STS0 0x40
+# define PCI_CFG_TXE_FW_STS0_WRK_ST_MSK 0x0000000F
+# define PCI_CFG_TXE_FW_STS0_OP_ST_MSK 0x000001C0
+# define PCI_CFG_TXE_FW_STS0_FW_INIT_CMPLT 0x00000200
+# define PCI_CFG_TXE_FW_STS0_ERR_CODE_MSK 0x0000F000
+# define PCI_CFG_TXE_FW_STS0_OP_MODE_MSK 0x000F0000
+# define PCI_CFG_TXE_FW_STS0_RST_CNT_MSK 0x00F00000
+
+
+#define IPC_BASE_ADDR 0x80400 /* SeC IPC Base Address */
+
+/* IPC Input Doorbell Register */
+#define SEC_IPC_INPUT_DOORBELL_REG (0x0000 + IPC_BASE_ADDR)
+
+/* IPC Input Status Register
+ * This register indicates whether or not processing of
+ * the most recent command has been completed by the SEC
+ * New commands and payloads should not be written by the Host
+ * until this indicates that the previous command has been processed.
+ */
+#define SEC_IPC_INPUT_STATUS_REG (0x0008 + IPC_BASE_ADDR)
+# define SEC_IPC_INPUT_STATUS_RDY BIT(0)
+
+/* IPC Host Interrupt Status Register */
+#define SEC_IPC_HOST_INT_STATUS_REG (0x0010 + IPC_BASE_ADDR)
+#define SEC_IPC_HOST_INT_STATUS_OUT_DB BIT(0)
+#define SEC_IPC_HOST_INT_STATUS_IN_RDY BIT(1)
+#define SEC_IPC_HOST_INT_STATUS_HDCP_M0_RCVD BIT(5)
+#define SEC_IPC_HOST_INT_STATUS_ILL_MEM_ACCESS BIT(17)
+#define SEC_IPC_HOST_INT_STATUS_AES_HKEY_ERR BIT(18)
+#define SEC_IPC_HOST_INT_STATUS_DES_HKEY_ERR BIT(19)
+#define SEC_IPC_HOST_INT_STATUS_TMRMTB_OVERFLOW BIT(21)
+
+/* Convenient mask for pending interrupts */
+#define SEC_IPC_HOST_INT_STATUS_PENDING \
+ (SEC_IPC_HOST_INT_STATUS_OUT_DB| \
+ SEC_IPC_HOST_INT_STATUS_IN_RDY)
+
+/* IPC Host Interrupt Mask Register */
+#define SEC_IPC_HOST_INT_MASK_REG (0x0014 + IPC_BASE_ADDR)
+
+# define SEC_IPC_HOST_INT_MASK_OUT_DB BIT(0) /* Output Doorbell Int Mask */
+# define SEC_IPC_HOST_INT_MASK_IN_RDY BIT(1) /* Input Ready Int Mask */
+
+/* IPC Input Payload RAM */
+#define SEC_IPC_INPUT_PAYLOAD_REG (0x0100 + IPC_BASE_ADDR)
+/* IPC Shared Payload RAM */
+#define IPC_SHARED_PAYLOAD_REG (0x0200 + IPC_BASE_ADDR)
+
+/* SeC Address Translation Table Entry 2 - Ctrl
+ *
+ * This register resides also in SeC's PCI-E Memory space.
+ */
+#define SATT2_CTRL_REG 0x1040
+# define SATT2_CTRL_VALID_MSK BIT(0)
+# define SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT 8
+# define SATT2_CTRL_BRIDGE_HOST_EN_MSK BIT(12)
+
+/* SATT Table Entry 2 SAP Base Address Register */
+#define SATT2_SAP_BA_REG 0x1044
+/* SATT Table Entry 2 SAP Size Register. */
+#define SATT2_SAP_SIZE_REG 0x1048
+ /* SATT Table Entry 2 SAP Bridge Address - LSB Register */
+#define SATT2_BRG_BA_LSB_REG 0x104C
+
+/* Host High-level Interrupt Status Register */
+#define HHISR_REG 0x2020
+/* Host High-level Interrupt Enable Register
+ *
+ * Resides in PCI memory space. This is the top hierarchy for
+ * interrupts from SeC to host, aggregating both interrupts that
+ * arrive through HICR registers as well as interrupts
+ * that arrive via IPC.
+ */
+#define HHIER_REG 0x2024
+#define IPC_HHIER_SEC BIT(0)
+#define IPC_HHIER_BRIDGE BIT(1)
+#define IPC_HHIER_MSK (IPC_HHIER_SEC | IPC_HHIER_BRIDGE)
+
+/* Host High-level Interrupt Mask Register.
+ *
+ * Resides in PCI memory space.
+ * This is the top hierarchy for masking interrupts from SeC to host.
+ */
+#define HHIMR_REG 0x2028
+#define IPC_HHIMR_SEC BIT(0)
+#define IPC_HHIMR_BRIDGE BIT(1)
+
+/* Host High-level IRQ Status Register */
+#define HHIRQSR_REG 0x202C
+
+/* Host Interrupt Cause Register 0 - SeC IPC Readiness
+ *
+ * This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * This register is used by SeC's IPC driver in order
+ * to synchronize with host about IPC interface state.
+ */
+#define HICR_SEC_IPC_READINESS_REG 0x2040
+#define HICR_SEC_IPC_READINESS_HOST_RDY BIT(0)
+#define HICR_SEC_IPC_READINESS_SEC_RDY BIT(1)
+#define HICR_SEC_IPC_READINESS_SYS_RDY \
+ (HICR_SEC_IPC_READINESS_HOST_RDY | \
+ HICR_SEC_IPC_READINESS_SEC_RDY)
+#define HICR_SEC_IPC_READINESS_RDY_CLR BIT(2)
+
+/* Host Interrupt Cause Register 1 - Aliveness Response */
+/* This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * The register may be used by SeC to ACK a host request for aliveness.
+ */
+#define HICR_HOST_ALIVENESS_RESP_REG 0x2044
+#define HICR_HOST_ALIVENESS_RESP_ACK BIT(0)
+
+/* Host Interrupt Cause Register 2 - SeC IPC Output Doorbell */
+#define HICR_SEC_IPC_OUTPUT_DOORBELL_REG 0x2048
+
+/* Host Interrupt Status Register.
+ *
+ * Resides in PCI memory space.
+ * This is the main register involved in generating interrupts
+ * from SeC to host via HICRs.
+ * The interrupt generation rules are as follows:
+ * An interrupt will be generated whenever for any i,
+ * there is a transition from a state where at least one of
+ * the following conditions did not hold, to a state where
+ * ALL the following conditions hold:
+ * A) HISR.INT[i]_STS == 1.
+ * B) HIER.INT[i]_EN == 1.
+ */
+#define HISR_REG 0x2060
+#define HISR_INT_0_STS BIT(0)
+#define HISR_INT_1_STS BIT(1)
+#define HISR_INT_2_STS BIT(2)
+#define HISR_INT_3_STS BIT(3)
+#define HISR_INT_4_STS BIT(4)
+#define HISR_INT_5_STS BIT(5)
+#define HISR_INT_6_STS BIT(6)
+#define HISR_INT_7_STS BIT(7)
+#define HISR_INT_STS_MSK \
+ (HISR_INT_0_STS | HISR_INT_1_STS | HISR_INT_2_STS)
+
+/* Host Interrupt Enable Register. Resides in PCI memory space. */
+#define HIER_REG 0x2064
+#define HIER_INT_0_EN BIT(0)
+#define HIER_INT_1_EN BIT(1)
+#define HIER_INT_2_EN BIT(2)
+#define HIER_INT_3_EN BIT(3)
+#define HIER_INT_4_EN BIT(4)
+#define HIER_INT_5_EN BIT(5)
+#define HIER_INT_6_EN BIT(6)
+#define HIER_INT_7_EN BIT(7)
+
+#define HIER_INT_EN_MSK \
+ (HIER_INT_0_EN | HIER_INT_1_EN | HIER_INT_2_EN)
+
+
+/* SEC Memory Space IPC output payload.
+ *
+ * This register is part of the output payload which SEC provides to host.
+ */
+#define BRIDGE_IPC_OUTPUT_PAYLOAD_REG 0x20C0
+
+/* SeC Interrupt Cause Register - Host Aliveness Request
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * The register is used by host to request SeC aliveness.
+ */
+#define SICR_HOST_ALIVENESS_REQ_REG 0x214C
+#define SICR_HOST_ALIVENESS_REQ_REQUESTED BIT(0)
+
+
+/* SeC Interrupt Cause Register - Host IPC Readiness
+ *
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * This register is used by the host's SeC driver uses in order
+ * to synchronize with SeC about IPC interface state.
+ */
+#define SICR_HOST_IPC_READINESS_REQ_REG 0x2150
+
+
+#define SICR_HOST_IPC_READINESS_HOST_RDY BIT(0)
+#define SICR_HOST_IPC_READINESS_SEC_RDY BIT(1)
+#define SICR_HOST_IPC_READINESS_SYS_RDY \
+ (SICR_HOST_IPC_READINESS_HOST_RDY | \
+ SICR_HOST_IPC_READINESS_SEC_RDY)
+#define SICR_HOST_IPC_READINESS_RDY_CLR BIT(2)
+
+/* SeC Interrupt Cause Register - SeC IPC Output Status
+ *
+ * This register indicates whether or not processing of the most recent
+ * command has been completed by the Host.
+ * New commands and payloads should not be written by SeC until this
+ * register indicates that the previous command has been processed.
+ */
+#define SICR_SEC_IPC_OUTPUT_STATUS_REG 0x2154
+# define SEC_IPC_OUTPUT_STATUS_RDY BIT(0)
+
+
+
+/* MEI IPC Message payload size 64 bytes */
+#define PAYLOAD_SIZE 64
+
+/* MAX size for SATT range 32MB */
+#define SATT_RANGE_MAX (32 << 20)
+
+
+#endif /* _MEI_HW_TXE_REGS_H_ */
+
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
new file mode 100644
index 000000000000..f60182a52f96
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.c
@@ -0,0 +1,1107 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/irqreturn.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+#include "client.h"
+#include "hbm.h"
+
+/**
+ * mei_txe_reg_read - Reads 32bit data from the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ *
+ */
+static inline u32 mei_txe_reg_read(void __iomem *base_addr,
+ unsigned long offset)
+{
+ return ioread32(base_addr + offset);
+}
+
+/**
+ * mei_txe_reg_write - Writes 32bit data to the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ * @value: the value to write
+ */
+static inline void mei_txe_reg_write(void __iomem *base_addr,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, base_addr + offset);
+}
+
+/**
+ * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ */
+static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset);
+}
+
+/**
+ * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ WARN(!hw->aliveness, "sec read: aliveness not asserted\n");
+ return mei_txe_sec_reg_read_silent(hw, offset);
+}
+/**
+ * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR
+ * doesn't check for aliveness
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Doesn't check for aliveness while writes 32bit data from to the SeC BAR
+ */
+static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value);
+}
+
+/**
+ * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ WARN(!hw->aliveness, "sec write: aliveness not asserted\n");
+ mei_txe_sec_reg_write_silent(hw, offset, value);
+}
+/**
+ * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to read the data
+ *
+ */
+static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset);
+}
+
+/**
+ * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to write the data
+ * @value: the byte to write
+ */
+static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value);
+}
+
+/**
+ * mei_txe_aliveness_set - request for aliveness change
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Request for aliveness change and returns true if the change is
+ * really needed and false if aliveness is already
+ * in the requested state
+ * Requires device lock to be held
+ */
+static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool do_req = hw->aliveness != req;
+
+ dev_dbg(&dev->pdev->dev, "Aliveness current=%d request=%d\n",
+ hw->aliveness, req);
+ if (do_req) {
+ hw->recvd_aliveness = false;
+ mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req);
+ }
+ return do_req;
+}
+
+
+/**
+ * mei_txe_aliveness_req_get - get aliveness requested register value
+ *
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
+ * from HICR_HOST_ALIVENESS_REQ register value
+ */
+static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG);
+ return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED;
+}
+
+/**
+ * mei_txe_aliveness_get - get aliveness response register value
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit
+ * from HICR_HOST_ALIVENESS_RESP register value
+ */
+static u32 mei_txe_aliveness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG);
+ return reg & HICR_HOST_ALIVENESS_RESP_ACK;
+}
+
+/**
+ * mei_txe_aliveness_poll - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns > 0 if the expected value was received, -ETIME otherwise
+ */
+static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int t = 0;
+
+ do {
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected) {
+ dev_dbg(&dev->pdev->dev,
+ "aliveness settled after %d msecs\n", t);
+ return t;
+ }
+ mutex_unlock(&dev->device_lock);
+ msleep(MSEC_PER_SEC / 5);
+ mutex_lock(&dev->device_lock);
+ t += MSEC_PER_SEC / 5;
+ } while (t < SEC_ALIVENESS_WAIT_TIMEOUT);
+
+ dev_err(&dev->pdev->dev, "aliveness timed out\n");
+ return -ETIME;
+}
+
+/**
+ * mei_txe_aliveness_wait - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns returns 0 on success and < 0 otherwise
+ */
+static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ const unsigned long timeout =
+ msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT);
+ long err;
+ int ret;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected)
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ err = wait_event_timeout(hw->wait_aliveness,
+ hw->recvd_aliveness, timeout);
+ mutex_lock(&dev->device_lock);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ ret = hw->aliveness == expected ? 0 : -ETIME;
+
+ if (ret)
+ dev_err(&dev->pdev->dev, "aliveness timed out");
+ else
+ dev_dbg(&dev->pdev->dev, "aliveness settled after %d msecs\n",
+ jiffies_to_msecs(timeout - err));
+ hw->recvd_aliveness = false;
+ return ret;
+}
+
+/**
+ * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
+ *
+ * @dev: the device structure
+ *
+ * returns returns 0 on success and < 0 otherwise
+ */
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
+{
+ if (mei_txe_aliveness_set(dev, req))
+ return mei_txe_aliveness_wait(dev, req);
+ return 0;
+}
+
+/**
+ * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hintmsk;
+ /* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */
+ hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG);
+ hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY;
+ mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk);
+}
+
+/**
+ * mei_txe_input_doorbell_set
+ * - Sets bit 0 in SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL.
+ * @dev: the device structure
+ */
+static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw)
+{
+ /* Clear the interrupt cause */
+ clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1);
+}
+
+/**
+ * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_output_ready_set(struct mei_txe_hw *hw)
+{
+ mei_txe_br_reg_write(hw,
+ SICR_SEC_IPC_OUTPUT_STATUS_REG,
+ SEC_IPC_OUTPUT_STATUS_RDY);
+}
+
+/**
+ * mei_txe_is_input_ready - check if TXE is ready for receiving data
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_is_input_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 status;
+ status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG);
+ return !!(SEC_IPC_INPUT_STATUS_RDY & status);
+}
+
+/**
+ * mei_txe_intr_clear - clear all interrupts
+ *
+ * @dev: the device structure
+ */
+static inline void mei_txe_intr_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG,
+ SEC_IPC_HOST_INT_STATUS_PENDING);
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK);
+ mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK);
+}
+
+/**
+ * mei_txe_intr_disable - disable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_disable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, 0);
+ mei_txe_br_reg_write(hw, HIER_REG, 0);
+}
+/**
+ * mei_txe_intr_disable - enable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK);
+ mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
+}
+
+/**
+ * mei_txe_pending_interrupts - check if there are pending interrupts
+ * only Aliveness, Input ready, and output doorbell are of relevance
+ *
+ * @dev: the device structure
+ *
+ * Checks if there are pending interrupts
+ * only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ */
+static bool mei_txe_pending_interrupts(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool ret = (hw->intr_cause & (TXE_INTR_READINESS |
+ TXE_INTR_ALIVENESS |
+ TXE_INTR_IN_READY |
+ TXE_INTR_OUT_DB));
+
+ if (ret) {
+ dev_dbg(&dev->pdev->dev,
+ "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
+ !!(hw->intr_cause & TXE_INTR_IN_READY),
+ !!(hw->intr_cause & TXE_INTR_READINESS),
+ !!(hw->intr_cause & TXE_INTR_ALIVENESS),
+ !!(hw->intr_cause & TXE_INTR_OUT_DB));
+ }
+ return ret;
+}
+
+/**
+ * mei_txe_input_payload_write - write a dword to the host buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the host buffer
+ * @value: value
+ */
+static void mei_txe_input_payload_write(struct mei_device *dev,
+ unsigned long idx, u32 value)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG +
+ (idx * sizeof(u32)), value);
+}
+
+/**
+ * mei_txe_out_data_read - read dword from the device buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the device buffer
+ *
+ * returns register value at index
+ */
+static u32 mei_txe_out_data_read(const struct mei_device *dev,
+ unsigned long idx)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw,
+ BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32)));
+}
+
+/* Readiness */
+
+/**
+ * mei_txe_readiness_set_host_rdy
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_set_host_rdy(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw,
+ SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_clear
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_RDY_CLR);
+}
+/**
+ * mei_txe_readiness_get - Reads and returns
+ * the HICR_SEC_IPC_READINESS register value
+ *
+ * @dev: the device structure
+ */
+static u32 mei_txe_readiness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+}
+
+
+/**
+ * mei_txe_readiness_is_sec_rdy - check readiness
+ * for HICR_SEC_IPC_READINESS_SEC_RDY
+ *
+ * @readiness - cached readiness state
+ */
+static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
+{
+ return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY);
+}
+
+/**
+ * mei_txe_hw_is_ready - check if the hw is ready
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_hw_is_ready(struct mei_device *dev)
+{
+ u32 readiness = mei_txe_readiness_get(dev);
+ return mei_txe_readiness_is_sec_rdy(readiness);
+}
+
+/**
+ * mei_txe_host_is_ready - check if the host is ready
+ *
+ * @dev: the device structure
+ */
+static inline bool mei_txe_host_is_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+ return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_wait - wait till readiness settles
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and -ETIME on timeout
+ */
+static int mei_txe_readiness_wait(struct mei_device *dev)
+{
+ if (mei_txe_hw_is_ready(dev))
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready,
+ msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(&dev->pdev->dev, "wait for readiness failed\n");
+ return -ETIME;
+ }
+
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+/**
+ * mei_txe_hw_config - configure hardware at the start of the devices
+ *
+ * @dev: the device structure
+ *
+ * Configure hardware at the start of the device should be done only
+ * once at the device probe time
+ */
+static void mei_txe_hw_config(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ /* Doesn't change in runtime */
+ dev->hbuf_depth = PAYLOAD_SIZE / 4;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ dev_dbg(&dev->pdev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+ hw->aliveness, hw->readiness);
+}
+
+
+/**
+ * mei_txe_write - writes a message to device.
+ *
+ * @dev: the device structure
+ * @header: header of message
+ * @buf: message buffer will be written
+ * returns 1 if success, 0 - otherwise.
+ */
+
+static int mei_txe_write(struct mei_device *dev,
+ struct mei_msg_hdr *header, unsigned char *buf)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ unsigned long rem;
+ unsigned long length;
+ int slots = dev->hbuf_depth;
+ u32 *reg_buf = (u32 *)buf;
+ u32 dw_cnt;
+ int i;
+
+ if (WARN_ON(!header || !buf))
+ return -EINVAL;
+
+ length = header->length;
+
+ dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
+
+ dw_cnt = mei_data2slots(length);
+ if (dw_cnt > slots)
+ return -EMSGSIZE;
+
+ if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n"))
+ return -EAGAIN;
+
+ /* Enable Input Ready Interrupt. */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+ if (!mei_txe_is_input_ready(dev)) {
+ dev_err(&dev->pdev->dev, "Input is not ready");
+ return -EAGAIN;
+ }
+
+ mei_txe_input_payload_write(dev, 0, *((u32 *)header));
+
+ for (i = 0; i < length / 4; i++)
+ mei_txe_input_payload_write(dev, i + 1, reg_buf[i]);
+
+ rem = length & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+ memcpy(&reg, &buf[length - rem], rem);
+ mei_txe_input_payload_write(dev, i + 1, reg);
+ }
+
+ /* after each write the whole buffer is consumed */
+ hw->slots = 0;
+
+ /* Set Input-Doorbell */
+ mei_txe_input_doorbell_set(hw);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hbuf_max_len - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns the PAYLOAD_SIZE - 4
+ */
+static size_t mei_txe_hbuf_max_len(const struct mei_device *dev)
+{
+ return PAYLOAD_SIZE - sizeof(struct mei_msg_hdr);
+}
+
+/**
+ * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always hbuf_depth
+ */
+static int mei_txe_hbuf_empty_slots(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return hw->slots;
+}
+
+/**
+ * mei_txe_count_full_read_slots - mimics the me device circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always buffer size in dwords count
+ */
+static int mei_txe_count_full_read_slots(struct mei_device *dev)
+{
+ /* read buffers has static size */
+ return PAYLOAD_SIZE / 4;
+}
+
+/**
+ * mei_txe_read_hdr - read message header which is always in 4 first bytes
+ *
+ * @dev: the device structure
+ *
+ * returns mei message header
+ */
+
+static u32 mei_txe_read_hdr(const struct mei_device *dev)
+{
+ return mei_txe_out_data_read(dev, 0);
+}
+/**
+ * mei_txe_read - reads a message from the txe device.
+ *
+ * @dev: the device structure
+ * @buf: message buffer will be written
+ * @len: message size will be read
+ *
+ * returns -EINVAL on error wrong argument and 0 on success
+ */
+static int mei_txe_read(struct mei_device *dev,
+ unsigned char *buf, unsigned long len)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 i;
+ u32 *reg_buf = (u32 *)buf;
+ u32 rem = len & 0x3;
+
+ if (WARN_ON(!buf || !len))
+ return -EINVAL;
+
+ dev_dbg(&dev->pdev->dev,
+ "buffer-length = %lu buf[0]0x%08X\n",
+ len, mei_txe_out_data_read(dev, 0));
+
+ for (i = 0; i < len / 4; i++) {
+ /* skip header: index starts from 1 */
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ dev_dbg(&dev->pdev->dev, "buf[%d] = 0x%08X\n", i, reg);
+ *reg_buf++ = reg;
+ }
+
+ if (rem) {
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ memcpy(reg_buf, &reg, rem);
+ }
+
+ mei_txe_output_ready_set(hw);
+ return 0;
+}
+
+/**
+ * mei_txe_hw_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 aliveness_req;
+ /*
+ * read input doorbell to ensure consistency between Bridge and SeC
+ * return value might be garbage return
+ */
+ (void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG);
+
+ aliveness_req = mei_txe_aliveness_req_get(dev);
+ hw->aliveness = mei_txe_aliveness_get(dev);
+
+ /* Disable interrupts in this stage we will poll */
+ mei_txe_intr_disable(dev);
+
+ /*
+ * If Aliveness Request and Aliveness Response are not equal then
+ * wait for them to be equal
+ * Since we might have interrupts disabled - poll for it
+ */
+ if (aliveness_req != hw->aliveness)
+ if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness settle failed ... bailing out\n");
+ return -EIO;
+ }
+
+ /*
+ * If Aliveness Request and Aliveness Response are set then clear them
+ */
+ if (aliveness_req) {
+ mei_txe_aliveness_set(dev, 0);
+ if (mei_txe_aliveness_poll(dev, 0) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness failed ... bailing out\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * Set rediness RDY_CLR bit
+ */
+ mei_txe_readiness_clear(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hw_start - start the hardware after reset
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_start(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int ret;
+
+ u32 hisr;
+
+ /* bring back interrupts */
+ mei_txe_intr_enable(dev);
+
+ ret = mei_txe_readiness_wait(dev);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wating for readiness failed\n");
+ return ret;
+ }
+
+ /*
+ * If HISR.INT2_STS interrupt status bit is set then clear it.
+ */
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+ if (hisr & HISR_INT_2_STS)
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS);
+
+ /* Clear the interrupt cause of OutputDoorbell */
+ clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause);
+
+ ret = mei_txe_aliveness_set_sync(dev, 1);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wait for aliveness failed ... bailing out\n");
+ return ret;
+ }
+
+ /* enable input ready interrupts:
+ * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK
+ */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+
+ /* Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */
+ mei_txe_output_ready_set(hw);
+
+ /* Set bit SICR_HOST_IPC_READINESS.HOST_RDY
+ */
+ mei_txe_readiness_set_host_rdy(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into
+ * single bit mask and acknowledge the interrupts
+ *
+ * @dev: the device structure
+ * @do_ack: acknowledge interrupts
+ */
+static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hisr;
+ u32 hhisr;
+ u32 ipc_isr;
+ u32 aliveness;
+ bool generated;
+
+ /* read interrupt registers */
+ hhisr = mei_txe_br_reg_read(hw, HHISR_REG);
+ generated = (hhisr & IPC_HHIER_MSK);
+ if (!generated)
+ goto out;
+
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+
+ aliveness = mei_txe_aliveness_get(dev);
+ if (hhisr & IPC_HHIER_SEC && aliveness)
+ ipc_isr = mei_txe_sec_reg_read_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG);
+ else
+ ipc_isr = 0;
+
+ generated = generated ||
+ (hisr & HISR_INT_STS_MSK) ||
+ (ipc_isr & SEC_IPC_HOST_INT_STATUS_PENDING);
+
+ if (generated && do_ack) {
+ /* Save the interrupt causes */
+ hw->intr_cause |= hisr & HISR_INT_STS_MSK;
+ if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY)
+ hw->intr_cause |= TXE_INTR_IN_READY;
+
+
+ mei_txe_intr_disable(dev);
+ /* Clear the interrupts in hierarchy:
+ * IPC and Bridge, than the High Level */
+ mei_txe_sec_reg_write_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG, ipc_isr);
+ mei_txe_br_reg_write(hw, HISR_REG, hisr);
+ mei_txe_br_reg_write(hw, HHISR_REG, hhisr);
+ }
+
+out:
+ return generated;
+}
+
+/**
+ * mei_txe_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ */
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = dev_id;
+
+ if (mei_txe_check_and_ack_intrs(dev, true))
+ return IRQ_WAKE_THREAD;
+ return IRQ_NONE;
+}
+
+
+/**
+ * mei_txe_irq_thread_handler - txe interrupt thread
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ *
+ */
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ struct mei_cl_cb complete_list;
+ s32 slots;
+ int rets = 0;
+
+ dev_dbg(&dev->pdev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+ mei_txe_br_reg_read(hw, HHISR_REG),
+ mei_txe_br_reg_read(hw, HISR_REG),
+ mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
+
+
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+ mei_io_list_init(&complete_list);
+
+ if (pci_dev_msi_enabled(dev->pdev))
+ mei_txe_check_and_ack_intrs(dev, true);
+
+ /* show irq events */
+ mei_txe_pending_interrupts(dev);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ /* Readiness:
+ * Detection of TXE driver going through reset
+ * or TXE driver resetting the HECI interface.
+ */
+ if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
+ dev_dbg(&dev->pdev->dev, "Readiness Interrupt was received...\n");
+
+ /* Check if SeC is going through reset */
+ if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
+ dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ } else {
+ dev->recvd_hw_ready = false;
+ if (dev->dev_state != MEI_DEV_RESETTING) {
+
+ dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+
+ }
+ }
+ wake_up(&dev->wait_hw_ready);
+ }
+
+ /************************************************************/
+ /* Check interrupt cause:
+ * Aliveness: Detection of SeC acknowledge of host request that
+ * it remain alive or host cancellation of that request.
+ */
+
+ if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
+ /* Clear the interrupt cause */
+ dev_dbg(&dev->pdev->dev,
+ "Aliveness Interrupt: Status: %d\n", hw->aliveness);
+ hw->recvd_aliveness = true;
+ if (waitqueue_active(&hw->wait_aliveness))
+ wake_up(&hw->wait_aliveness);
+ }
+
+
+ /* Output Doorbell:
+ * Detection of SeC having sent output to host
+ */
+ slots = mei_count_full_read_slots(dev);
+ if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) {
+ /* Read from TXE */
+ rets = mei_irq_read_handler(dev, &complete_list, &slots);
+ if (rets && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_err(&dev->pdev->dev,
+ "mei_irq_read_handler ret = %d.\n", rets);
+
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+ /* Input Ready: Detection if host can write to SeC */
+ if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause)) {
+ dev->hbuf_is_ready = true;
+ hw->slots = dev->hbuf_depth;
+ }
+
+ if (hw->aliveness && dev->hbuf_is_ready) {
+ /* get the real register value */
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ rets = mei_irq_write_handler(dev, &complete_list);
+ if (rets && rets != -EMSGSIZE)
+ dev_err(&dev->pdev->dev, "mei_irq_write_handler ret = %d.\n",
+ rets);
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ }
+
+ mei_irq_compl_handler(dev, &complete_list);
+
+end:
+ dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets);
+
+ mutex_unlock(&dev->device_lock);
+
+ mei_enable_interrupts(dev);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_txe_hw_ops = {
+
+ .host_is_ready = mei_txe_host_is_ready,
+
+ .hw_is_ready = mei_txe_hw_is_ready,
+ .hw_reset = mei_txe_hw_reset,
+ .hw_config = mei_txe_hw_config,
+ .hw_start = mei_txe_hw_start,
+
+ .intr_clear = mei_txe_intr_clear,
+ .intr_enable = mei_txe_intr_enable,
+ .intr_disable = mei_txe_intr_disable,
+
+ .hbuf_free_slots = mei_txe_hbuf_empty_slots,
+ .hbuf_is_ready = mei_txe_is_input_ready,
+ .hbuf_max_len = mei_txe_hbuf_max_len,
+
+ .write = mei_txe_write,
+
+ .rdbuf_full_slots = mei_txe_count_full_read_slots,
+ .read_hdr = mei_txe_read_hdr,
+
+ .read = mei_txe_read,
+
+};
+
+/**
+ * mei_txe_dev_init - allocates and initializes txe hardware specific structure
+ *
+ * @pdev - pci device
+ * returns struct mei_device * on success or NULL;
+ *
+ */
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = kzalloc(sizeof(struct mei_device) +
+ sizeof(struct mei_txe_hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ mei_device_init(dev);
+
+ hw = to_txe_hw(dev);
+
+ init_waitqueue_head(&hw->wait_aliveness);
+
+ dev->ops = &mei_txe_hw_ops;
+
+ dev->pdev = pdev;
+ return dev;
+}
+
+/**
+ * mei_txe_setup_satt2 - SATT2 configuration for DMA support.
+ *
+ * @dev: the device structure
+ * @addr: physical address start of the range
+ * @range: physical range size
+ */
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 lo32 = lower_32_bits(addr);
+ u32 hi32 = upper_32_bits(addr);
+ u32 ctrl;
+
+ /* SATT is limited to 36 Bits */
+ if (hi32 & ~0xF)
+ return -EINVAL;
+
+ /* SATT has to be 16Byte aligned */
+ if (lo32 & 0xF)
+ return -EINVAL;
+
+ /* SATT range has to be 4Bytes aligned */
+ if (range & 0x4)
+ return -EINVAL;
+
+ /* SATT is limited to 32 MB range*/
+ if (range > SATT_RANGE_MAX)
+ return -EINVAL;
+
+ ctrl = SATT2_CTRL_VALID_MSK;
+ ctrl |= hi32 << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT;
+
+ mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
+ mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
+ mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
+ dev_dbg(&dev->pdev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+ range, lo32, ctrl);
+
+ return 0;
+}
diff --git a/drivers/misc/mei/hw-txe.h b/drivers/misc/mei/hw-txe.h
new file mode 100644
index 000000000000..0812d98633a4
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.h
@@ -0,0 +1,74 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_HW_TXE_H_
+#define _MEI_HW_TXE_H_
+
+#include <linux/irqreturn.h>
+
+#include "hw.h"
+#include "hw-txe-regs.h"
+
+/* Flatten Hierarchy interrupt cause */
+#define TXE_INTR_READINESS_BIT 0 /* HISR_INT_0_STS */
+#define TXE_INTR_READINESS HISR_INT_0_STS
+#define TXE_INTR_ALIVENESS_BIT 1 /* HISR_INT_1_STS */
+#define TXE_INTR_ALIVENESS HISR_INT_1_STS
+#define TXE_INTR_OUT_DB_BIT 2 /* HISR_INT_2_STS */
+#define TXE_INTR_OUT_DB HISR_INT_2_STS
+#define TXE_INTR_IN_READY_BIT 8 /* beyond HISR */
+#define TXE_INTR_IN_READY BIT(8)
+
+/**
+ * struct mei_txe_hw - txe hardware specifics
+ *
+ * @mem_addr: SeC and BRIDGE bars
+ * @aliveness: aliveness (power gating) state of the hardware
+ * @readiness: readiness state of the hardware
+ * @wait_aliveness: aliveness wait queue
+ * @recvd_aliveness: aliveness interrupt was recived
+ * @intr_cause: translated interrupt cause
+ */
+struct mei_txe_hw {
+ void __iomem *mem_addr[NUM_OF_MEM_BARS];
+ u32 aliveness;
+ u32 readiness;
+ u32 slots;
+
+ wait_queue_head_t wait_aliveness;
+ bool recvd_aliveness;
+
+ unsigned long intr_cause;
+};
+
+#define to_txe_hw(dev) (struct mei_txe_hw *)((dev)->hw)
+
+static inline struct mei_device *hw_txe_to_mei(struct mei_txe_hw *hw)
+{
+ return container_of((void *)hw, struct mei_device, hw);
+}
+
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev);
+
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id);
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id);
+
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req);
+
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range);
+
+
+#endif /* _MEI_HW_TXE_H_ */
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index dd44e33ad2b6..6b476ab49b2e 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -22,7 +22,7 @@
/*
* Timeouts in Seconds
*/
-#define MEI_INTEROP_TIMEOUT 7 /* Timeout on ready message */
+#define MEI_HW_READY_TIMEOUT 2 /* Timeout on ready message */
#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
@@ -31,13 +31,13 @@
#define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */
#define MEI_IAMTHIF_READ_TIMER 10 /* HPS */
+#define MEI_HBM_TIMEOUT 1 /* 1 second */
/*
* MEI Version
*/
#define HBM_MINOR_VERSION 0
#define HBM_MAJOR_VERSION 1
-#define HBM_TIMEOUT 1 /* 1 second */
/* Host bus message command opcode */
#define MEI_HBM_CMD_OP_MSK 0x7f
@@ -89,19 +89,19 @@ enum mei_stop_reason_types {
* Client Connect Status
* used by hbm_client_connect_response.status
*/
-enum client_connect_status_types {
- CCS_SUCCESS = 0x00,
- CCS_NOT_FOUND = 0x01,
- CCS_ALREADY_STARTED = 0x02,
- CCS_OUT_OF_RESOURCES = 0x03,
- CCS_MESSAGE_SMALL = 0x04
+enum mei_cl_connect_status {
+ MEI_CL_CONN_SUCCESS = 0x00,
+ MEI_CL_CONN_NOT_FOUND = 0x01,
+ MEI_CL_CONN_ALREADY_STARTED = 0x02,
+ MEI_CL_CONN_OUT_OF_RESOURCES = 0x03,
+ MEI_CL_CONN_MESSAGE_SMALL = 0x04
};
/*
* Client Disconnect Status
*/
-enum client_disconnect_status_types {
- CDS_SUCCESS = 0x00
+enum mei_cl_disconnect_status {
+ MEI_CL_DISCONN_SUCCESS = 0x00
};
/*
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index cdd31c2a2a2b..4460975c0eef 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -116,7 +116,6 @@ int mei_reset(struct mei_device *dev)
mei_cl_unlink(&dev->wd_cl);
mei_cl_unlink(&dev->iamthif_cl);
mei_amthif_reset_params(dev);
- memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
}
@@ -126,7 +125,6 @@ int mei_reset(struct mei_device *dev)
if (ret) {
dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
return ret;
}
@@ -139,7 +137,6 @@ int mei_reset(struct mei_device *dev)
ret = mei_hw_start(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
return ret;
}
@@ -149,7 +146,7 @@ int mei_reset(struct mei_device *dev)
ret = mei_hbm_start_req(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
+ dev->dev_state = MEI_DEV_RESETTING;
return ret;
}
@@ -166,6 +163,7 @@ EXPORT_SYMBOL_GPL(mei_reset);
*/
int mei_start(struct mei_device *dev)
{
+ int ret;
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interrupts */
@@ -175,10 +173,18 @@ int mei_start(struct mei_device *dev)
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
- dev->dev_state = MEI_DEV_INITIALIZING;
dev->reset_count = 0;
- mei_reset(dev);
+ do {
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ ret = mei_reset(dev);
+
+ if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
+ goto err;
+ }
+ } while (ret);
+ /* we cannot start the device w/o hbm start message completed */
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed");
goto err;
@@ -238,27 +244,40 @@ int mei_restart(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
- if (err || dev->dev_state == MEI_DEV_DISABLED)
+ if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
return -ENODEV;
+ }
+
+ /* try to start again */
+ if (err)
+ schedule_work(&dev->reset_work);
+
return 0;
}
EXPORT_SYMBOL_GPL(mei_restart);
-
static void mei_reset_work(struct work_struct *work)
{
struct mei_device *dev =
container_of(work, struct mei_device, reset_work);
+ int ret;
mutex_lock(&dev->device_lock);
- mei_reset(dev);
+ ret = mei_reset(dev);
mutex_unlock(&dev->device_lock);
- if (dev->dev_state == MEI_DEV_DISABLED)
- dev_err(&dev->pdev->dev, "reset failed");
+ if (dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "device disabled = %d\n", ret);
+ return;
+ }
+
+ /* retry reset in case of failure */
+ if (ret)
+ schedule_work(&dev->reset_work);
}
void mei_stop(struct mei_device *dev)
@@ -269,6 +288,8 @@ void mei_stop(struct mei_device *dev)
mei_nfc_host_exit(dev);
+ mei_cl_bus_remove_devices(dev);
+
mutex_lock(&dev->device_lock);
mei_wd_stop(dev);
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index f0fbb5179f80..29b5af8efb71 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -26,7 +26,6 @@
#include "mei_dev.h"
#include "hbm.h"
-#include "hw-me.h"
#include "client.h"
@@ -161,29 +160,63 @@ static int mei_cl_irq_read_msg(struct mei_device *dev,
}
/**
+ * mei_cl_irq_disconnect_rsp - send disconnection response message
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @cmpl_list: complete list.
+ *
+ * returns 0, OK; otherwise, error.
+ */
+static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
+ int ret;
+
+ slots = mei_hbuf_empty_slots(dev);
+ msg_slots = mei_data2slots(sizeof(struct hbm_client_connect_response));
+
+ if (slots < msg_slots)
+ return -EMSGSIZE;
+
+ ret = mei_hbm_cl_disconnect_rsp(dev, cl);
+
+ cl->state = MEI_FILE_DISCONNECTED;
+ cl->status = 0;
+ list_del(&cb->list);
+ mei_io_cb_free(cb);
+
+ return ret;
+}
+
+
+
+/**
* mei_cl_irq_close - processes close related operation from
* interrupt thread context - send disconnect request
*
* @cl: client
* @cb: callback block.
- * @slots: free slots.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise, error.
*/
static int mei_cl_irq_close(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list)
+ struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
- u32 msg_slots =
- mei_data2slots(sizeof(struct hbm_client_connect_request));
+ msg_slots = mei_data2slots(sizeof(struct hbm_client_connect_request));
+ slots = mei_hbuf_empty_slots(dev);
- if (*slots < msg_slots)
+ if (slots < msg_slots)
return -EMSGSIZE;
- *slots -= msg_slots;
-
if (mei_hbm_cl_disconnect_req(dev, cl)) {
cl->status = 0;
cb->buf_idx = 0;
@@ -207,27 +240,23 @@ static int mei_cl_irq_close(struct mei_cl *cl, struct mei_cl_cb *cb,
*
* @cl: client
* @cb: callback block.
- * @slots: free slots.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise, error.
*/
static int mei_cl_irq_read(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list)
+ struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev = cl->dev;
- u32 msg_slots = mei_data2slots(sizeof(struct hbm_flow_control));
-
+ u32 msg_slots;
+ int slots;
int ret;
+ msg_slots = mei_data2slots(sizeof(struct hbm_flow_control));
+ slots = mei_hbuf_empty_slots(dev);
- if (*slots < msg_slots) {
- /* return the cancel routine */
- list_del(&cb->list);
+ if (slots < msg_slots)
return -EMSGSIZE;
- }
-
- *slots -= msg_slots;
ret = mei_hbm_cl_flow_control_req(dev, cl);
if (ret) {
@@ -244,32 +273,30 @@ static int mei_cl_irq_read(struct mei_cl *cl, struct mei_cl_cb *cb,
/**
- * mei_cl_irq_ioctl - processes client ioctl related operation from the
- * interrupt thread context - send connection request
+ * mei_cl_irq_connect - send connect request in irq_thread context
*
* @cl: client
* @cb: callback block.
- * @slots: free slots.
* @cmpl_list: complete list.
*
* returns 0, OK; otherwise, error.
*/
-static int mei_cl_irq_ioctl(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list)
+static int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev = cl->dev;
+ u32 msg_slots;
+ int slots;
int ret;
- u32 msg_slots =
- mei_data2slots(sizeof(struct hbm_client_connect_request));
+ msg_slots = mei_data2slots(sizeof(struct hbm_client_connect_request));
+ slots = mei_hbuf_empty_slots(dev);
- if (*slots < msg_slots) {
- /* return the cancel routine */
- list_del(&cb->list);
- return -EMSGSIZE;
- }
+ if (mei_cl_is_other_connecting(cl))
+ return 0;
- *slots -= msg_slots;
+ if (slots < msg_slots)
+ return -EMSGSIZE;
cl->state = MEI_FILE_CONNECTING;
@@ -323,7 +350,7 @@ int mei_irq_read_handler(struct mei_device *dev,
dev_err(&dev->pdev->dev, "less data available than length=%08x.\n",
*slots);
/* we can't read the message */
- ret = -ERANGE;
+ ret = -ENODATA;
goto end;
}
@@ -409,10 +436,10 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
s32 slots;
int ret;
- if (!mei_hbuf_is_ready(dev)) {
- dev_dbg(&dev->pdev->dev, "host buffer is not empty.\n");
+
+ if (!mei_hbuf_acquire(dev))
return 0;
- }
+
slots = mei_hbuf_empty_slots(dev);
if (slots <= 0)
return -EMSGSIZE;
@@ -447,29 +474,16 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
if (dev->wd_state == MEI_WD_STOPPING) {
dev->wd_state = MEI_WD_IDLE;
- wake_up_interruptible(&dev->wait_stop_wd);
+ wake_up(&dev->wait_stop_wd);
}
- if (dev->wr_ext_msg.hdr.length) {
- mei_write_message(dev, &dev->wr_ext_msg.hdr,
- dev->wr_ext_msg.data);
- slots -= mei_data2slots(dev->wr_ext_msg.hdr.length);
- dev->wr_ext_msg.hdr.length = 0;
- }
- if (dev->dev_state == MEI_DEV_ENABLED) {
+ if (mei_cl_is_connected(&dev->wd_cl)) {
if (dev->wd_pending &&
mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) {
- if (mei_wd_send(dev))
- dev_dbg(&dev->pdev->dev, "wd send failed.\n");
- else if (mei_cl_flow_ctrl_reduce(&dev->wd_cl))
- return -ENODEV;
-
+ ret = mei_wd_send(dev);
+ if (ret)
+ return ret;
dev->wd_pending = false;
-
- if (dev->wd_state == MEI_WD_RUNNING)
- slots -= mei_data2slots(MEI_WD_START_MSG_SIZE);
- else
- slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE);
}
}
@@ -484,28 +498,31 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
switch (cb->fop_type) {
case MEI_FOP_CLOSE:
/* send disconnect message */
- ret = mei_cl_irq_close(cl, cb, &slots, cmpl_list);
+ ret = mei_cl_irq_close(cl, cb, cmpl_list);
if (ret)
return ret;
break;
case MEI_FOP_READ:
/* send flow control message */
- ret = mei_cl_irq_read(cl, cb, &slots, cmpl_list);
+ ret = mei_cl_irq_read(cl, cb, cmpl_list);
if (ret)
return ret;
break;
- case MEI_FOP_IOCTL:
+ case MEI_FOP_CONNECT:
/* connect message */
- if (mei_cl_is_other_connecting(cl))
- continue;
- ret = mei_cl_irq_ioctl(cl, cb, &slots, cmpl_list);
+ ret = mei_cl_irq_connect(cl, cb, cmpl_list);
if (ret)
return ret;
break;
-
+ case MEI_FOP_DISCONNECT_RSP:
+ /* send disconnect resp */
+ ret = mei_cl_irq_disconnect_rsp(cl, cb, cmpl_list);
+ if (ret)
+ return ret;
+ break;
default:
BUG();
}
@@ -518,11 +535,9 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
if (cl == NULL)
continue;
if (cl == &dev->iamthif_cl)
- ret = mei_amthif_irq_write_complete(cl, cb,
- &slots, cmpl_list);
+ ret = mei_amthif_irq_write(cl, cb, cmpl_list);
else
- ret = mei_cl_irq_write_complete(cl, cb,
- &slots, cmpl_list);
+ ret = mei_cl_irq_write(cl, cb, cmpl_list);
if (ret)
return ret;
}
@@ -541,8 +556,7 @@ EXPORT_SYMBOL_GPL(mei_irq_write_handler);
void mei_timer(struct work_struct *work)
{
unsigned long timeout;
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
+ struct mei_cl *cl;
struct mei_cl_cb *cb_pos = NULL;
struct mei_cl_cb *cb_next = NULL;
@@ -570,9 +584,9 @@ void mei_timer(struct work_struct *work)
goto out;
/*** connect/disconnect timeouts ***/
- list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
- if (cl_pos->timer_count) {
- if (--cl_pos->timer_count == 0) {
+ list_for_each_entry(cl, &dev->file_list, link) {
+ if (cl->timer_count) {
+ if (--cl->timer_count == 0) {
dev_err(&dev->pdev->dev, "timer: connect/disconnect timeout.\n");
mei_reset(dev);
goto out;
@@ -580,6 +594,9 @@ void mei_timer(struct work_struct *work)
}
}
+ if (!mei_cl_is_connected(&dev->iamthif_cl))
+ goto out;
+
if (dev->iamthif_stall_timer) {
if (--dev->iamthif_stall_timer == 0) {
dev_err(&dev->pdev->dev, "timer: amthif hanged.\n");
@@ -619,10 +636,10 @@ void mei_timer(struct work_struct *work)
list_for_each_entry_safe(cb_pos, cb_next,
&dev->amthif_rd_complete_list.list, list) {
- cl_pos = cb_pos->file_object->private_data;
+ cl = cb_pos->file_object->private_data;
/* Finding the AMTHI entry. */
- if (cl_pos == &dev->iamthif_cl)
+ if (cl == &dev->iamthif_cl)
list_del(&cb_pos->list);
}
mei_io_cb_free(dev->iamthif_current_cb);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 5424f8ff3f7f..b35594dbf52f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -13,9 +13,6 @@
* more details.
*
*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
@@ -40,7 +37,6 @@
#include <linux/mei.h>
#include "mei_dev.h"
-#include "hw-me.h"
#include "client.h"
/**
@@ -129,17 +125,11 @@ static int mei_release(struct inode *inode, struct file *file)
}
if (cl->state == MEI_FILE_CONNECTED) {
cl->state = MEI_FILE_DISCONNECTING;
- dev_dbg(&dev->pdev->dev,
- "disconnecting client host client = %d, "
- "ME client = %d\n",
- cl->host_client_id,
- cl->me_client_id);
+ cl_dbg(dev, cl, "disconnecting\n");
rets = mei_cl_disconnect(cl);
}
mei_cl_flush_queues(cl);
- dev_dbg(&dev->pdev->dev, "remove client host client = %d, ME client = %d\n",
- cl->host_client_id,
- cl->me_client_id);
+ cl_dbg(dev, cl, "removing\n");
mei_cl_unlink(cl);
@@ -284,6 +274,7 @@ copy_buffer:
length = min_t(size_t, length, cb->buf_idx - *offset);
if (copy_to_user(ubuf, cb->response_buffer.data + *offset, length)) {
+ dev_dbg(&dev->pdev->dev, "failed to copy data to userland\n");
rets = -EFAULT;
goto free;
}
@@ -340,7 +331,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
id = mei_me_cl_by_id(dev, cl->me_client_id);
if (id < 0) {
- rets = -ENODEV;
+ rets = -ENOTTY;
goto out;
}
@@ -404,7 +395,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
rets = copy_from_user(write_cb->request_buffer.data, ubuf, length);
if (rets) {
- dev_err(&dev->pdev->dev, "failed to copy data from userland\n");
+ dev_dbg(&dev->pdev->dev, "failed to copy data from userland\n");
rets = -EFAULT;
goto out;
}
@@ -471,7 +462,7 @@ static int mei_ioctl_connect_client(struct file *file,
if (i < 0 || dev->me_clients[i].props.fixed_address) {
dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n",
&data->in_client_uuid);
- rets = -ENODEV;
+ rets = -ENOTTY;
goto end;
}
@@ -569,7 +560,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
dev_dbg(&dev->pdev->dev, "copy connect data from user\n");
if (copy_from_user(connect_data, (char __user *)data,
sizeof(struct mei_connect_client_data))) {
- dev_err(&dev->pdev->dev, "failed to copy data from userland\n");
+ dev_dbg(&dev->pdev->dev, "failed to copy data from userland\n");
rets = -EFAULT;
goto out;
}
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index f7de95b4cdd9..94a516716d22 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -24,7 +24,6 @@
#include <linux/mei_cl_bus.h>
#include "hw.h"
-#include "hw-me-regs.h"
#include "hbm.h"
/*
@@ -130,16 +129,18 @@ enum mei_wd_states {
/**
* enum mei_cb_file_ops - file operation associated with the callback
- * @MEI_FOP_READ - read
- * @MEI_FOP_WRITE - write
- * @MEI_FOP_IOCTL - ioctl
- * @MEI_FOP_OPEN - open
- * @MEI_FOP_CLOSE - close
+ * @MEI_FOP_READ - read
+ * @MEI_FOP_WRITE - write
+ * @MEI_FOP_CONNECT - connect
+ * @MEI_FOP_DISCONNECT_RSP - disconnect response
+ * @MEI_FOP_OPEN - open
+ * @MEI_FOP_CLOSE - close
*/
enum mei_cb_file_ops {
MEI_FOP_READ = 0,
MEI_FOP_WRITE,
- MEI_FOP_IOCTL,
+ MEI_FOP_CONNECT,
+ MEI_FOP_DISCONNECT_RSP,
MEI_FOP_OPEN,
MEI_FOP_CLOSE
};
@@ -236,20 +237,20 @@ struct mei_cl {
*/
struct mei_hw_ops {
- bool (*host_is_ready) (struct mei_device *dev);
+ bool (*host_is_ready)(struct mei_device *dev);
- bool (*hw_is_ready) (struct mei_device *dev);
- int (*hw_reset) (struct mei_device *dev, bool enable);
- int (*hw_start) (struct mei_device *dev);
- void (*hw_config) (struct mei_device *dev);
+ bool (*hw_is_ready)(struct mei_device *dev);
+ int (*hw_reset)(struct mei_device *dev, bool enable);
+ int (*hw_start)(struct mei_device *dev);
+ void (*hw_config)(struct mei_device *dev);
- void (*intr_clear) (struct mei_device *dev);
- void (*intr_enable) (struct mei_device *dev);
- void (*intr_disable) (struct mei_device *dev);
+ void (*intr_clear)(struct mei_device *dev);
+ void (*intr_enable)(struct mei_device *dev);
+ void (*intr_disable)(struct mei_device *dev);
- int (*hbuf_free_slots) (struct mei_device *dev);
- bool (*hbuf_is_ready) (struct mei_device *dev);
- size_t (*hbuf_max_len) (const struct mei_device *dev);
+ int (*hbuf_free_slots)(struct mei_device *dev);
+ bool (*hbuf_is_ready)(struct mei_device *dev);
+ size_t (*hbuf_max_len)(const struct mei_device *dev);
int (*write)(struct mei_device *dev,
struct mei_msg_hdr *hdr,
@@ -258,7 +259,7 @@ struct mei_hw_ops {
int (*rdbuf_full_slots)(struct mei_device *dev);
u32 (*read_hdr)(const struct mei_device *dev);
- int (*read) (struct mei_device *dev,
+ int (*read)(struct mei_device *dev,
unsigned char *buf, unsigned long len);
};
@@ -294,6 +295,7 @@ int __mei_cl_async_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length);
int __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length);
void mei_cl_bus_rx_event(struct mei_cl *cl);
+void mei_cl_bus_remove_devices(struct mei_device *dev);
int mei_cl_bus_init(void);
void mei_cl_bus_exit(void);
@@ -339,7 +341,6 @@ struct mei_cl_device {
* @hbuf_depth - depth of hardware host/write buffer is slots
* @hbuf_is_ready - query if the host host/write buffer is ready
* @wr_msg - the buffer for hbm control messages
- * @wr_ext_msg - the buffer for hbm control responses (set in read cycle)
*/
struct mei_device {
struct pci_dev *pdev; /* pointer to pci device struct */
@@ -394,11 +395,6 @@ struct mei_device {
unsigned char data[128];
} wr_msg;
- struct {
- struct mei_msg_hdr hdr;
- unsigned char data[4]; /* All HBM messages are 4 bytes */
- } wr_ext_msg; /* for control responses */
-
struct hbm_version version;
struct mei_me_client *me_clients; /* Note: memory has to be allocated */
@@ -518,8 +514,8 @@ struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev,
void mei_amthif_run_next_cmd(struct mei_device *dev);
-int mei_amthif_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
- s32 *slots, struct mei_cl_cb *cmpl_list);
+int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
+ struct mei_cl_cb *cmpl_list);
void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb);
int mei_amthif_irq_read_msg(struct mei_device *dev,
@@ -546,7 +542,7 @@ int mei_wd_host_init(struct mei_device *dev);
* once we got connection to the WD Client
* @dev - mei device
*/
-void mei_watchdog_register(struct mei_device *dev);
+int mei_watchdog_register(struct mei_device *dev);
/*
* mei_watchdog_unregister - Unregistering watchdog interface
* @dev - mei device
@@ -633,6 +629,8 @@ static inline int mei_count_full_read_slots(struct mei_device *dev)
return dev->ops->rdbuf_full_slots(dev);
}
+bool mei_hbuf_acquire(struct mei_device *dev);
+
#if IS_ENABLED(CONFIG_DEBUG_FS)
int mei_dbgfs_register(struct mei_device *dev, const char *name);
void mei_dbgfs_deregister(struct mei_device *dev);
diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c
index a58320c0c049..3095fc514a65 100644
--- a/drivers/misc/mei/nfc.c
+++ b/drivers/misc/mei/nfc.c
@@ -364,7 +364,7 @@ static int mei_nfc_send(struct mei_cl_device *cldev, u8 *buf, size_t length)
if (!wait_event_interruptible_timeout(ndev->send_wq,
ndev->recv_req_id == ndev->req_id, HZ)) {
dev_err(&dev->pdev->dev, "NFC MEI command timeout\n");
- err = -ETIMEDOUT;
+ err = -ETIME;
} else {
ndev->req_id++;
}
@@ -502,7 +502,7 @@ int mei_nfc_host_init(struct mei_device *dev)
i = mei_me_cl_by_uuid(dev, &mei_nfc_info_guid);
if (i < 0) {
dev_info(&dev->pdev->dev, "nfc: failed to find the client\n");
- ret = -ENOENT;
+ ret = -ENOTTY;
goto err;
}
@@ -520,7 +520,7 @@ int mei_nfc_host_init(struct mei_device *dev)
i = mei_me_cl_by_uuid(dev, &mei_nfc_guid);
if (i < 0) {
dev_info(&dev->pdev->dev, "nfc: failed to find the client\n");
- ret = -ENOENT;
+ ret = -ENOTTY;
goto err;
}
@@ -552,13 +552,7 @@ err:
void mei_nfc_host_exit(struct mei_device *dev)
{
struct mei_nfc_dev *ndev = &nfc_dev;
-
cancel_work_sync(&ndev->init_work);
+}
- mutex_lock(&dev->device_lock);
- if (ndev->cl && ndev->cl->device)
- mei_cl_remove_device(ndev->cl->device);
- mei_nfc_free(ndev);
- mutex_unlock(&dev->device_lock);
-}
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index ddadd08956f4..1c8fd3a3e135 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -13,9 +13,6 @@
* more details.
*
*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
@@ -27,7 +24,6 @@
#include <linux/aio.h>
#include <linux/pci.h>
#include <linux/poll.h>
-#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/sched.h>
@@ -40,11 +36,12 @@
#include <linux/mei.h>
#include "mei_dev.h"
-#include "hw-me.h"
#include "client.h"
+#include "hw-me-regs.h"
+#include "hw-me.h"
/* mei_pci_tbl - PCI Device ID Table */
-static DEFINE_PCI_DEVICE_TABLE(mei_me_pci_tbl) = {
+static const struct pci_device_id mei_me_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82946GZ)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82G35)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82Q965)},
@@ -270,7 +267,7 @@ static void mei_me_remove(struct pci_dev *pdev)
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mei_me_pci_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
@@ -330,11 +327,12 @@ static int mei_me_pci_resume(struct device *device)
return 0;
}
+
static SIMPLE_DEV_PM_OPS(mei_me_pm_ops, mei_me_pci_suspend, mei_me_pci_resume);
#define MEI_ME_PM_OPS (&mei_me_pm_ops)
#else
#define MEI_ME_PM_OPS NULL
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
/*
* PCI driver structure
*/
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
new file mode 100644
index 000000000000..ad3adb009a1e
--- /dev/null
+++ b/drivers/misc/mei/pci-txe.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+#include <linux/mei.h>
+
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+
+static const struct pci_device_id mei_txe_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F18)}, /* Baytrail */
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);
+
+
+static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw)
+{
+ int i;
+ for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+ if (hw->mem_addr[i]) {
+ pci_iounmap(pdev, hw->mem_addr[i]);
+ hw->mem_addr[i] = NULL;
+ }
+ }
+}
+/**
+ * mei_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in mei_txe_pci_tbl
+ *
+ * returns 0 on success, <0 on failure.
+ */
+static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+ int err;
+ int i;
+
+ /* enable pci dev */
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device.\n");
+ goto end;
+ }
+ /* set PCI host mastering */
+ pci_set_master(pdev);
+ /* pci request regions for mei driver */
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get pci regions.\n");
+ goto disable_device;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No suitable DMA available.\n");
+ goto release_regions;
+ }
+ }
+
+ /* allocates and initializes the mei dev structure */
+ dev = mei_txe_dev_init(pdev);
+ if (!dev) {
+ err = -ENOMEM;
+ goto release_regions;
+ }
+ hw = to_txe_hw(dev);
+
+ /* mapping IO device memory */
+ for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+ hw->mem_addr[i] = pci_iomap(pdev, i, 0);
+ if (!hw->mem_addr[i]) {
+ dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
+ err = -ENOMEM;
+ goto free_device;
+ }
+ }
+
+
+ pci_enable_msi(pdev);
+
+ /* clear spurious interrupts */
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
+ pdev->irq);
+ goto free_device;
+ }
+
+ if (mei_start(dev)) {
+ dev_err(&pdev->dev, "init hw failure.\n");
+ err = -ENODEV;
+ goto release_irq;
+ }
+
+ err = mei_register(dev);
+ if (err)
+ goto release_irq;
+
+ pci_set_drvdata(pdev, dev);
+
+ return 0;
+
+release_irq:
+
+ mei_cancel_work(dev);
+
+ /* disable interrupts */
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+free_device:
+ mei_txe_pci_iounmap(pdev, hw);
+
+ kfree(dev);
+release_regions:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+end:
+ dev_err(&pdev->dev, "initialization failed.\n");
+ return err;
+}
+
+/**
+ * mei_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void mei_txe_remove(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev) {
+ dev_err(&pdev->dev, "mei: dev =NULL\n");
+ return;
+ }
+
+ hw = to_txe_hw(dev);
+
+ mei_stop(dev);
+
+ /* disable interrupts */
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ mei_txe_pci_iounmap(pdev, hw);
+
+ mei_deregister(dev);
+
+ kfree(dev);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+
+#ifdef CONFIG_PM_SLEEP
+static int mei_txe_pci_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev = pci_get_drvdata(pdev);
+
+ if (!dev)
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "suspend\n");
+
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ return 0;
+}
+
+static int mei_txe_pci_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int err;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ pci_enable_msi(pdev);
+
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+ pdev->irq);
+ return err;
+ }
+
+ err = mei_restart(dev);
+
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(mei_txe_pm_ops,
+ mei_txe_pci_suspend,
+ mei_txe_pci_resume);
+
+#define MEI_TXE_PM_OPS (&mei_txe_pm_ops)
+#else
+#define MEI_TXE_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+/*
+ * PCI driver structure
+ */
+static struct pci_driver mei_txe_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mei_txe_pci_tbl,
+ .probe = mei_txe_probe,
+ .remove = mei_txe_remove,
+ .shutdown = mei_txe_remove,
+ .driver.pm = MEI_TXE_PM_OPS,
+};
+
+module_pci_driver(mei_txe_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index f70945ed96f6..ebf1cbc198fd 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -25,7 +25,6 @@
#include "mei_dev.h"
#include "hbm.h"
-#include "hw-me.h"
#include "client.h"
static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
@@ -53,7 +52,7 @@ static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
*
* @dev: the device structure
*
- * returns -ENENT if wd client cannot be found
+ * returns -ENOTTY if wd client cannot be found
* -EIO if write has failed
* 0 on success
*/
@@ -73,7 +72,7 @@ int mei_wd_host_init(struct mei_device *dev)
id = mei_me_cl_by_uuid(dev, &mei_wd_guid);
if (id < 0) {
dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
- return id;
+ return -ENOTTY;
}
cl->me_client_id = dev->me_clients[id].client_id;
@@ -87,15 +86,20 @@ int mei_wd_host_init(struct mei_device *dev)
cl->state = MEI_FILE_CONNECTING;
- if (mei_hbm_cl_connect_req(dev, cl)) {
- dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n");
- cl->state = MEI_FILE_DISCONNECTED;
- cl->host_client_id = 0;
- return -EIO;
+ ret = mei_cl_connect(cl, NULL);
+
+ if (ret) {
+ dev_err(&dev->pdev->dev, "wd: failed to connect = %d\n", ret);
+ mei_cl_unlink(cl);
+ return ret;
}
- cl->timer_count = MEI_CONNECT_TIMEOUT;
- return 0;
+ ret = mei_watchdog_register(dev);
+ if (ret) {
+ mei_cl_disconnect(cl);
+ mei_cl_unlink(cl);
+ }
+ return ret;
}
/**
@@ -106,13 +110,16 @@ int mei_wd_host_init(struct mei_device *dev)
* returns 0 if success,
* -EIO when message send fails
* -EINVAL when invalid message is to be sent
+ * -ENODEV on flow control failure
*/
int mei_wd_send(struct mei_device *dev)
{
+ struct mei_cl *cl = &dev->wd_cl;
struct mei_msg_hdr hdr;
+ int ret;
- hdr.host_addr = dev->wd_cl.host_client_id;
- hdr.me_addr = dev->wd_cl.me_client_id;
+ hdr.host_addr = cl->host_client_id;
+ hdr.me_addr = cl->me_client_id;
hdr.msg_complete = 1;
hdr.reserved = 0;
hdr.internal = 0;
@@ -121,10 +128,24 @@ int mei_wd_send(struct mei_device *dev)
hdr.length = MEI_WD_START_MSG_SIZE;
else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE))
hdr.length = MEI_WD_STOP_MSG_SIZE;
- else
+ else {
+ dev_err(&dev->pdev->dev, "wd: invalid message is to be sent, aborting\n");
return -EINVAL;
+ }
- return mei_write_message(dev, &hdr, dev->wd_data);
+ ret = mei_write_message(dev, &hdr, dev->wd_data);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "wd: write message failed\n");
+ return ret;
+ }
+
+ ret = mei_cl_flow_ctrl_reduce(cl);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "wd: flow_ctrl_reduce failed.\n");
+ return ret;
+ }
+
+ return 0;
}
/**
@@ -133,9 +154,11 @@ int mei_wd_send(struct mei_device *dev)
* @dev: the device structure
* @preserve: indicate if to keep the timeout value
*
- * returns 0 if success,
- * -EIO when message send fails
+ * returns 0 if success
+ * on error:
+ * -EIO when message send fails
* -EINVAL when invalid message is to be sent
+ * -ETIME on message timeout
*/
int mei_wd_stop(struct mei_device *dev)
{
@@ -151,20 +174,12 @@ int mei_wd_stop(struct mei_device *dev)
ret = mei_cl_flow_ctrl_creds(&dev->wd_cl);
if (ret < 0)
- goto out;
-
- if (ret && dev->hbuf_is_ready) {
- ret = 0;
- dev->hbuf_is_ready = false;
-
- if (!mei_wd_send(dev)) {
- ret = mei_cl_flow_ctrl_reduce(&dev->wd_cl);
- if (ret)
- goto out;
- } else {
- dev_err(&dev->pdev->dev, "wd: send stop failed\n");
- }
+ goto err;
+ if (ret && mei_hbuf_acquire(dev)) {
+ ret = mei_wd_send(dev);
+ if (ret)
+ goto err;
dev->wd_pending = false;
} else {
dev->wd_pending = true;
@@ -172,21 +187,21 @@ int mei_wd_stop(struct mei_device *dev)
mutex_unlock(&dev->device_lock);
- ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
- dev->wd_state == MEI_WD_IDLE,
- msecs_to_jiffies(MEI_WD_STOP_TIMEOUT));
+ ret = wait_event_timeout(dev->wait_stop_wd,
+ dev->wd_state == MEI_WD_IDLE,
+ msecs_to_jiffies(MEI_WD_STOP_TIMEOUT));
mutex_lock(&dev->device_lock);
- if (dev->wd_state == MEI_WD_IDLE) {
- dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
- ret = 0;
- } else {
- if (!ret)
- ret = -ETIMEDOUT;
+ if (dev->wd_state != MEI_WD_IDLE) {
+ /* timeout */
+ ret = -ETIME;
dev_warn(&dev->pdev->dev,
"wd: stop failed to complete ret=%d.\n", ret);
+ goto err;
}
-
-out:
+ dev_dbg(&dev->pdev->dev, "wd: stop completed after %u msec\n",
+ MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret));
+ return 0;
+err:
return ret;
}
@@ -260,8 +275,8 @@ static int mei_wd_ops_stop(struct watchdog_device *wd_dev)
*/
static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
{
- int ret = 0;
struct mei_device *dev;
+ int ret;
dev = watchdog_get_drvdata(wd_dev);
if (!dev)
@@ -277,25 +292,18 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
dev->wd_state = MEI_WD_RUNNING;
+ ret = mei_cl_flow_ctrl_creds(&dev->wd_cl);
+ if (ret < 0)
+ goto end;
/* Check if we can send the ping to HW*/
- if (dev->hbuf_is_ready && mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) {
+ if (ret && mei_hbuf_acquire(dev)) {
- dev->hbuf_is_ready = false;
dev_dbg(&dev->pdev->dev, "wd: sending ping\n");
- if (mei_wd_send(dev)) {
- dev_err(&dev->pdev->dev, "wd: send failed.\n");
- ret = -EIO;
+ ret = mei_wd_send(dev);
+ if (ret)
goto end;
- }
-
- if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) {
- dev_err(&dev->pdev->dev,
- "wd: mei_cl_flow_ctrl_reduce() failed.\n");
- ret = -EIO;
- goto end;
- }
-
+ dev->wd_pending = false;
} else {
dev->wd_pending = true;
}
@@ -363,17 +371,25 @@ static struct watchdog_device amt_wd_dev = {
};
-void mei_watchdog_register(struct mei_device *dev)
+int mei_watchdog_register(struct mei_device *dev)
{
- if (watchdog_register_device(&amt_wd_dev)) {
- dev_err(&dev->pdev->dev,
- "wd: unable to register watchdog device.\n");
- return;
+
+ int ret;
+
+ /* unlock to perserve correct locking order */
+ mutex_unlock(&dev->device_lock);
+ ret = watchdog_register_device(&amt_wd_dev);
+ mutex_lock(&dev->device_lock);
+ if (ret) {
+ dev_err(&dev->pdev->dev, "wd: unable to register watchdog device = %d.\n",
+ ret);
+ return ret;
}
dev_dbg(&dev->pdev->dev,
"wd: successfully register watchdog interface.\n");
watchdog_set_drvdata(&amt_wd_dev, dev);
+ return 0;
}
void mei_watchdog_unregister(struct mei_device *dev)
diff --git a/drivers/misc/mic/host/mic_intr.c b/drivers/misc/mic/host/mic_intr.c
index f9c29bc918bc..dbc5afde1392 100644
--- a/drivers/misc/mic/host/mic_intr.c
+++ b/drivers/misc/mic/host/mic_intr.c
@@ -194,7 +194,7 @@ static int mic_setup_msix(struct mic_device *mdev, struct pci_dev *pdev)
for (i = 0; i < MIC_MIN_MSIX; i++)
mdev->irq_info.msix_entries[i].entry = i;
- rc = pci_enable_msix(pdev, mdev->irq_info.msix_entries,
+ rc = pci_enable_msix_exact(pdev, mdev->irq_info.msix_entries,
MIC_MIN_MSIX);
if (rc) {
dev_dbg(&pdev->dev, "Error enabling MSIx. rc = %d\n", rc);
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index a5925f7f17f6..956597321d2a 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -636,6 +636,7 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr,
u8 mac[ETH_ALEN];
ssize_t rom_size;
struct pch_phub_reg *chip = dev_get_drvdata(dev);
+ int ret;
if (!mac_pton(buf, mac))
return -EINVAL;
@@ -644,8 +645,10 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr,
if (!chip->pch_phub_extrom_base_address)
return -ENOMEM;
- pch_phub_write_gbe_mac_addr(chip, mac);
+ ret = pch_phub_write_gbe_mac_addr(chip, mac);
pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+ if (ret)
+ return ret;
return count;
}
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index afe66571ce0b..21181fa243df 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -24,6 +24,9 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/list.h>
+#include <linux/list_sort.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -36,14 +39,35 @@ struct sram_dev {
struct clk *clk;
};
+struct sram_reserve {
+ struct list_head list;
+ u32 start;
+ u32 size;
+};
+
+static int sram_reserve_cmp(void *priv, struct list_head *a,
+ struct list_head *b)
+{
+ struct sram_reserve *ra = list_entry(a, struct sram_reserve, list);
+ struct sram_reserve *rb = list_entry(b, struct sram_reserve, list);
+
+ return ra->start - rb->start;
+}
+
static int sram_probe(struct platform_device *pdev)
{
void __iomem *virt_base;
struct sram_dev *sram;
struct resource *res;
- unsigned long size;
+ struct device_node *np = pdev->dev.of_node, *child;
+ unsigned long size, cur_start, cur_size;
+ struct sram_reserve *rblocks, *block;
+ struct list_head reserve_list;
+ unsigned int nblocks;
int ret;
+ INIT_LIST_HEAD(&reserve_list);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
virt_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(virt_base))
@@ -65,19 +89,106 @@ static int sram_probe(struct platform_device *pdev)
if (!sram->pool)
return -ENOMEM;
- ret = gen_pool_add_virt(sram->pool, (unsigned long)virt_base,
- res->start, size, -1);
- if (ret < 0) {
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
- return ret;
+ /*
+ * We need an additional block to mark the end of the memory region
+ * after the reserved blocks from the dt are processed.
+ */
+ nblocks = (np) ? of_get_available_child_count(np) + 1 : 1;
+ rblocks = kmalloc((nblocks) * sizeof(*rblocks), GFP_KERNEL);
+ if (!rblocks) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ block = &rblocks[0];
+ for_each_available_child_of_node(np, child) {
+ struct resource child_res;
+
+ ret = of_address_to_resource(child, 0, &child_res);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not get address for node %s\n",
+ child->full_name);
+ goto err_chunks;
+ }
+
+ if (child_res.start < res->start || child_res.end > res->end) {
+ dev_err(&pdev->dev,
+ "reserved block %s outside the sram area\n",
+ child->full_name);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ block->start = child_res.start - res->start;
+ block->size = resource_size(&child_res);
+ list_add_tail(&block->list, &reserve_list);
+
+ dev_dbg(&pdev->dev, "found reserved block 0x%x-0x%x\n",
+ block->start,
+ block->start + block->size);
+
+ block++;
+ }
+
+ /* the last chunk marks the end of the region */
+ rblocks[nblocks - 1].start = size;
+ rblocks[nblocks - 1].size = 0;
+ list_add_tail(&rblocks[nblocks - 1].list, &reserve_list);
+
+ list_sort(NULL, &reserve_list, sram_reserve_cmp);
+
+ cur_start = 0;
+
+ list_for_each_entry(block, &reserve_list, list) {
+ /* can only happen if sections overlap */
+ if (block->start < cur_start) {
+ dev_err(&pdev->dev,
+ "block at 0x%x starts after current offset 0x%lx\n",
+ block->start, cur_start);
+ ret = -EINVAL;
+ goto err_chunks;
+ }
+
+ /* current start is in a reserved block, so continue after it */
+ if (block->start == cur_start) {
+ cur_start = block->start + block->size;
+ continue;
+ }
+
+ /*
+ * allocate the space between the current starting
+ * address and the following reserved block, or the
+ * end of the region.
+ */
+ cur_size = block->start - cur_start;
+
+ dev_dbg(&pdev->dev, "adding chunk 0x%lx-0x%lx\n",
+ cur_start, cur_start + cur_size);
+ ret = gen_pool_add_virt(sram->pool,
+ (unsigned long)virt_base + cur_start,
+ res->start + cur_start, cur_size, -1);
+ if (ret < 0)
+ goto err_chunks;
+
+ /* next allocation after this reserved block */
+ cur_start = block->start + block->size;
}
+ kfree(rblocks);
+
platform_set_drvdata(pdev, sram);
dev_dbg(&pdev->dev, "SRAM pool: %ld KiB @ 0x%p\n", size / 1024, virt_base);
return 0;
+
+err_chunks:
+ kfree(rblocks);
+err_alloc:
+ if (sram->clk)
+ clk_disable_unprepare(sram->clk);
+ return ret;
}
static int sram_remove(struct platform_device *pdev)
@@ -87,8 +198,6 @@ static int sram_remove(struct platform_device *pdev)
if (gen_pool_avail(sram->pool) < gen_pool_size(sram->pool))
dev_dbg(&pdev->dev, "removed while SRAM allocated\n");
- gen_pool_destroy(sram->pool);
-
if (sram->clk)
clk_disable_unprepare(sram->clk);
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 3aed525e55b4..1972d57aadb3 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -22,7 +22,6 @@
#define pr_fmt(fmt) "(stc): " fmt
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/tty.h>
#include <linux/seq_file.h>
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
index 83da711ce9f1..cb0289b44a17 100644
--- a/drivers/misc/ti_dac7512.c
+++ b/drivers/misc/ti_dac7512.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c
index 5bc10fa193de..b00335652e52 100644
--- a/drivers/misc/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
diff --git a/drivers/misc/vmw_vmci/vmci_guest.c b/drivers/misc/vmw_vmci/vmci_guest.c
index d35cda06b5e8..e0d5017785e5 100644
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -383,11 +383,12 @@ static int vmci_enable_msix(struct pci_dev *pdev,
vmci_dev->msix_entries[i].vector = i;
}
- result = pci_enable_msix(pdev, vmci_dev->msix_entries, VMCI_MAX_INTRS);
+ result = pci_enable_msix_exact(pdev,
+ vmci_dev->msix_entries, VMCI_MAX_INTRS);
if (result == 0)
vmci_dev->exclusive_vectors = true;
- else if (result > 0)
- result = pci_enable_msix(pdev, vmci_dev->msix_entries, 1);
+ else if (result == -ENOSPC)
+ result = pci_enable_msix_exact(pdev, vmci_dev->msix_entries, 1);
return result;
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 90ff447bf043..a4bee41ad5cb 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -428,6 +428,7 @@ config MTD_NAND_FSL_IFC
tristate "NAND support for Freescale IFC controller"
depends on MTD_NAND && FSL_SOC
select FSL_IFC
+ select MEMORY
help
Various Freescale chips e.g P1010, include a NAND Flash machine
with built-in hardware ECC capabilities.
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 90ca7e75d6f0..50d9161c4faf 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -30,7 +30,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand_ecc.h>
-#include <asm/fsl_ifc.h>
+#include <linux/fsl_ifc.h>
#define FSL_IFC_V1_1_0 0x01010000
#define ERR_BYTE 0xFF /* Value returned for read
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 6a83ee1e9178..3fa66244ce32 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -905,7 +905,8 @@ int parport_claim_or_block(struct pardevice *dev)
/* If dev->waiting is clear now, an interrupt
gave us the port and we would deadlock if we slept. */
if (dev->waiting) {
- interruptible_sleep_on (&dev->wait_q);
+ wait_event_interruptible(dev->wait_q,
+ !dev->waiting);
if (signal_pending (current)) {
return -EINTR;
}
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
new file mode 100644
index 000000000000..bf1295e19f89
--- /dev/null
+++ b/drivers/spmi/Kconfig
@@ -0,0 +1,27 @@
+#
+# SPMI driver configuration
+#
+menuconfig SPMI
+ tristate "SPMI support"
+ help
+ SPMI (System Power Management Interface) is a two-wire
+ serial interface between baseband and application processors
+ and Power Management Integrated Circuits (PMIC).
+
+if SPMI
+
+config SPMI_MSM_PMIC_ARB
+ tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
+ depends on ARM
+ depends on IRQ_DOMAIN
+ depends on ARCH_QCOM || COMPILE_TEST
+ default ARCH_QCOM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Qualcomm MSM family
+ processors.
+
+ This is required for communicating with Qualcomm PMICs and
+ other devices that have the SPMI interface.
+
+endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
new file mode 100644
index 000000000000..fc75104a5aab
--- /dev/null
+++ b/drivers/spmi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for kernel SPMI framework.
+#
+obj-$(CONFIG_SPMI) += spmi.o
+
+obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
new file mode 100644
index 000000000000..246e03a18c94
--- /dev/null
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -0,0 +1,778 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/* PMIC Arbiter configuration registers */
+#define PMIC_ARB_VERSION 0x0000
+#define PMIC_ARB_INT_EN 0x0004
+
+/* PMIC Arbiter channel registers */
+#define PMIC_ARB_CMD(N) (0x0800 + (0x80 * (N)))
+#define PMIC_ARB_CONFIG(N) (0x0804 + (0x80 * (N)))
+#define PMIC_ARB_STATUS(N) (0x0808 + (0x80 * (N)))
+#define PMIC_ARB_WDATA0(N) (0x0810 + (0x80 * (N)))
+#define PMIC_ARB_WDATA1(N) (0x0814 + (0x80 * (N)))
+#define PMIC_ARB_RDATA0(N) (0x0818 + (0x80 * (N)))
+#define PMIC_ARB_RDATA1(N) (0x081C + (0x80 * (N)))
+
+/* Interrupt Controller */
+#define SPMI_PIC_OWNER_ACC_STATUS(M, N) (0x0000 + ((32 * (M)) + (4 * (N))))
+#define SPMI_PIC_ACC_ENABLE(N) (0x0200 + (4 * (N)))
+#define SPMI_PIC_IRQ_STATUS(N) (0x0600 + (4 * (N)))
+#define SPMI_PIC_IRQ_CLEAR(N) (0x0A00 + (4 * (N)))
+
+/* Mapping Table */
+#define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N)))
+#define SPMI_MAPPING_BIT_INDEX(X) (((X) >> 18) & 0xF)
+#define SPMI_MAPPING_BIT_IS_0_FLAG(X) (((X) >> 17) & 0x1)
+#define SPMI_MAPPING_BIT_IS_0_RESULT(X) (((X) >> 9) & 0xFF)
+#define SPMI_MAPPING_BIT_IS_1_FLAG(X) (((X) >> 8) & 0x1)
+#define SPMI_MAPPING_BIT_IS_1_RESULT(X) (((X) >> 0) & 0xFF)
+
+#define SPMI_MAPPING_TABLE_LEN 255
+#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
+
+/* Ownership Table */
+#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
+#define SPMI_OWNERSHIP_PERIPH2OWNER(X) ((X) & 0x7)
+
+/* Channel Status fields */
+enum pmic_arb_chnl_status {
+ PMIC_ARB_STATUS_DONE = (1 << 0),
+ PMIC_ARB_STATUS_FAILURE = (1 << 1),
+ PMIC_ARB_STATUS_DENIED = (1 << 2),
+ PMIC_ARB_STATUS_DROPPED = (1 << 3),
+};
+
+/* Command register fields */
+#define PMIC_ARB_CMD_MAX_BYTE_COUNT 8
+
+/* Command Opcodes */
+enum pmic_arb_cmd_op_code {
+ PMIC_ARB_OP_EXT_WRITEL = 0,
+ PMIC_ARB_OP_EXT_READL = 1,
+ PMIC_ARB_OP_EXT_WRITE = 2,
+ PMIC_ARB_OP_RESET = 3,
+ PMIC_ARB_OP_SLEEP = 4,
+ PMIC_ARB_OP_SHUTDOWN = 5,
+ PMIC_ARB_OP_WAKEUP = 6,
+ PMIC_ARB_OP_AUTHENTICATE = 7,
+ PMIC_ARB_OP_MSTR_READ = 8,
+ PMIC_ARB_OP_MSTR_WRITE = 9,
+ PMIC_ARB_OP_EXT_READ = 13,
+ PMIC_ARB_OP_WRITE = 14,
+ PMIC_ARB_OP_READ = 15,
+ PMIC_ARB_OP_ZERO_WRITE = 16,
+};
+
+/* Maximum number of support PMIC peripherals */
+#define PMIC_ARB_MAX_PERIPHS 256
+#define PMIC_ARB_PERIPH_ID_VALID (1 << 15)
+#define PMIC_ARB_TIMEOUT_US 100
+#define PMIC_ARB_MAX_TRANS_BYTES (8)
+
+#define PMIC_ARB_APID_MASK 0xFF
+#define PMIC_ARB_PPID_MASK 0xFFF
+
+/* interrupt enable bit */
+#define SPMI_PIC_ACC_ENABLE_BIT BIT(0)
+
+/**
+ * spmi_pmic_arb_dev - SPMI PMIC Arbiter object
+ *
+ * @base: address of the PMIC Arbiter core registers.
+ * @intr: address of the SPMI interrupt control registers.
+ * @cnfg: address of the PMIC Arbiter configuration registers.
+ * @lock: lock to synchronize accesses.
+ * @channel: which channel to use for accesses.
+ * @irq: PMIC ARB interrupt.
+ * @ee: the current Execution Environment
+ * @min_apid: minimum APID (used for bounding IRQ search)
+ * @max_apid: maximum APID
+ * @mapping_table: in-memory copy of PPID -> APID mapping table.
+ * @domain: irq domain object for PMIC IRQ domain
+ * @spmic: SPMI controller object
+ * @apid_to_ppid: cached mapping from APID to PPID
+ */
+struct spmi_pmic_arb_dev {
+ void __iomem *base;
+ void __iomem *intr;
+ void __iomem *cnfg;
+ raw_spinlock_t lock;
+ u8 channel;
+ int irq;
+ u8 ee;
+ u8 min_apid;
+ u8 max_apid;
+ u32 mapping_table[SPMI_MAPPING_TABLE_LEN];
+ struct irq_domain *domain;
+ struct spmi_controller *spmic;
+ u16 apid_to_ppid[256];
+};
+
+static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset)
+{
+ return readl_relaxed(dev->base + offset);
+}
+
+static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev,
+ u32 offset, u32 val)
+{
+ writel_relaxed(val, dev->base + offset);
+}
+
+/**
+ * pa_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
+ * @bc: byte count -1. range: 0..3
+ * @reg: register's address
+ * @buf: output parameter, length must be bc + 1
+ */
+static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
+{
+ u32 data = pmic_arb_base_read(dev, reg);
+ memcpy(buf, &data, (bc & 3) + 1);
+}
+
+/**
+ * pa_write_data: write 1..4 bytes from buf to pmic-arb's register
+ * @bc: byte-count -1. range: 0..3.
+ * @reg: register's address.
+ * @buf: buffer to write. length must be bc + 1.
+ */
+static void
+pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc)
+{
+ u32 data = 0;
+ memcpy(&data, buf, (bc & 3) + 1);
+ pmic_arb_base_write(dev, reg, data);
+}
+
+static int pmic_arb_wait_for_done(struct spmi_controller *ctrl)
+{
+ struct spmi_pmic_arb_dev *dev = spmi_controller_get_drvdata(ctrl);
+ u32 status = 0;
+ u32 timeout = PMIC_ARB_TIMEOUT_US;
+ u32 offset = PMIC_ARB_STATUS(dev->channel);
+
+ while (timeout--) {
+ status = pmic_arb_base_read(dev, offset);
+
+ if (status & PMIC_ARB_STATUS_DONE) {
+ if (status & PMIC_ARB_STATUS_DENIED) {
+ dev_err(&ctrl->dev,
+ "%s: transaction denied (0x%x)\n",
+ __func__, status);
+ return -EPERM;
+ }
+
+ if (status & PMIC_ARB_STATUS_FAILURE) {
+ dev_err(&ctrl->dev,
+ "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ if (status & PMIC_ARB_STATUS_DROPPED) {
+ dev_err(&ctrl->dev,
+ "%s: transaction dropped (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ return 0;
+ }
+ udelay(1);
+ }
+
+ dev_err(&ctrl->dev,
+ "%s: timeout, status 0x%x\n",
+ __func__, status);
+ return -ETIMEDOUT;
+}
+
+/* Non-data command */
+static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u32 cmd;
+ int rc;
+
+ /* Check for valid non-data command */
+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+ return -EINVAL;
+
+ cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20);
+
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+ return rc;
+}
+
+static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, u8 *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u8 bc = len - 1;
+ u32 cmd;
+ int rc;
+
+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "pmic-arb supports 1..%d bytes per trans, but %d requested",
+ PMIC_ARB_MAX_TRANS_BYTES, len);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x60 && opc <= 0x7F)
+ opc = PMIC_ARB_OP_READ;
+ else if (opc >= 0x20 && opc <= 0x2F)
+ opc = PMIC_ARB_OP_EXT_READ;
+ else if (opc >= 0x38 && opc <= 0x3F)
+ opc = PMIC_ARB_OP_EXT_READL;
+ else
+ return -EINVAL;
+
+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ if (rc)
+ goto done;
+
+ pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel),
+ min_t(u8, bc, 3));
+
+ if (bc > 3)
+ pa_read_data(pmic_arb, buf + 4,
+ PMIC_ARB_RDATA1(pmic_arb->channel), bc - 4);
+
+done:
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+ return rc;
+}
+
+static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, const u8 *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u8 bc = len - 1;
+ u32 cmd;
+ int rc;
+
+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "pmic-arb supports 1..%d bytes per trans, but:%d requested",
+ PMIC_ARB_MAX_TRANS_BYTES, len);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x40 && opc <= 0x5F)
+ opc = PMIC_ARB_OP_WRITE;
+ else if (opc >= 0x00 && opc <= 0x0F)
+ opc = PMIC_ARB_OP_EXT_WRITE;
+ else if (opc >= 0x30 && opc <= 0x37)
+ opc = PMIC_ARB_OP_EXT_WRITEL;
+ else if (opc >= 0x80 && opc <= 0xFF)
+ opc = PMIC_ARB_OP_ZERO_WRITE;
+ else
+ return -EINVAL;
+
+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+ /* Write data to FIFOs */
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pa_write_data(pmic_arb, buf, PMIC_ARB_WDATA0(pmic_arb->channel)
+ , min_t(u8, bc, 3));
+ if (bc > 3)
+ pa_write_data(pmic_arb, buf + 4,
+ PMIC_ARB_WDATA1(pmic_arb->channel), bc - 4);
+
+ /* Start the transaction */
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+ return rc;
+}
+
+enum qpnpint_regs {
+ QPNPINT_REG_RT_STS = 0x10,
+ QPNPINT_REG_SET_TYPE = 0x11,
+ QPNPINT_REG_POLARITY_HIGH = 0x12,
+ QPNPINT_REG_POLARITY_LOW = 0x13,
+ QPNPINT_REG_LATCHED_CLR = 0x14,
+ QPNPINT_REG_EN_SET = 0x15,
+ QPNPINT_REG_EN_CLR = 0x16,
+ QPNPINT_REG_LATCHED_STS = 0x18,
+};
+
+struct spmi_pmic_arb_qpnpint_type {
+ u8 type; /* 1 -> edge */
+ u8 polarity_high;
+ u8 polarity_low;
+} __packed;
+
+/* Simplified accessor functions for irqchip callbacks */
+static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
+ size_t len)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 sid = d->hwirq >> 24;
+ u8 per = d->hwirq >> 16;
+
+ if (pmic_arb_write_cmd(pa->spmic, SPMI_CMD_EXT_WRITEL, sid,
+ (per << 8) + reg, buf, len))
+ dev_err_ratelimited(&pa->spmic->dev,
+ "failed irqchip transaction on %x\n",
+ d->irq);
+}
+
+static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 sid = d->hwirq >> 24;
+ u8 per = d->hwirq >> 16;
+
+ if (pmic_arb_read_cmd(pa->spmic, SPMI_CMD_EXT_READL, sid,
+ (per << 8) + reg, buf, len))
+ dev_err_ratelimited(&pa->spmic->dev,
+ "failed irqchip transaction on %x\n",
+ d->irq);
+}
+
+static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
+{
+ unsigned int irq;
+ u32 status;
+ int id;
+
+ status = readl_relaxed(pa->intr + SPMI_PIC_IRQ_STATUS(apid));
+ while (status) {
+ id = ffs(status) - 1;
+ status &= ~(1 << id);
+ irq = irq_find_mapping(pa->domain,
+ pa->apid_to_ppid[apid] << 16
+ | id << 8
+ | apid);
+ generic_handle_irq(irq);
+ }
+}
+
+static void pmic_arb_chained_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct spmi_pmic_arb_dev *pa = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ void __iomem *intr = pa->intr;
+ int first = pa->min_apid >> 5;
+ int last = pa->max_apid >> 5;
+ u32 status;
+ int i, id;
+
+ chained_irq_enter(chip, desc);
+
+ for (i = first; i <= last; ++i) {
+ status = readl_relaxed(intr +
+ SPMI_PIC_OWNER_ACC_STATUS(pa->ee, i));
+ while (status) {
+ id = ffs(status) - 1;
+ status &= ~(1 << id);
+ periph_interrupt(pa, id + i * 32);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void qpnpint_irq_ack(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ writel_relaxed(1 << irq, pa->intr + SPMI_PIC_IRQ_CLEAR(apid));
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
+}
+
+static void qpnpint_irq_mask(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u32 status;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ if (status & SPMI_PIC_ACC_ENABLE_BIT) {
+ status = status & ~SPMI_PIC_ACC_ENABLE_BIT;
+ writel_relaxed(status, pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ }
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &data, 1);
+}
+
+static void qpnpint_irq_unmask(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u32 status;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ if (!(status & SPMI_PIC_ACC_ENABLE_BIT)) {
+ writel_relaxed(status | SPMI_PIC_ACC_ENABLE_BIT,
+ pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ }
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_EN_SET, &data, 1);
+}
+
+static void qpnpint_irq_enable(struct irq_data *d)
+{
+ u8 irq = d->hwirq >> 8;
+ u8 data;
+
+ qpnpint_irq_unmask(d);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
+}
+
+static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct spmi_pmic_arb_qpnpint_type type;
+ u8 irq = d->hwirq >> 8;
+
+ qpnpint_spmi_read(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
+
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ type.type |= 1 << irq;
+ if (flow_type & IRQF_TRIGGER_RISING)
+ type.polarity_high |= 1 << irq;
+ if (flow_type & IRQF_TRIGGER_FALLING)
+ type.polarity_low |= 1 << irq;
+ } else {
+ if ((flow_type & (IRQF_TRIGGER_HIGH)) &&
+ (flow_type & (IRQF_TRIGGER_LOW)))
+ return -EINVAL;
+
+ type.type &= ~(1 << irq); /* level trig */
+ if (flow_type & IRQF_TRIGGER_HIGH)
+ type.polarity_high |= 1 << irq;
+ else
+ type.polarity_low |= 1 << irq;
+ }
+
+ qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
+ return 0;
+}
+
+static struct irq_chip pmic_arb_irqchip = {
+ .name = "pmic_arb",
+ .irq_enable = qpnpint_irq_enable,
+ .irq_ack = qpnpint_irq_ack,
+ .irq_mask = qpnpint_irq_mask,
+ .irq_unmask = qpnpint_irq_unmask,
+ .irq_set_type = qpnpint_irq_set_type,
+ .flags = IRQCHIP_MASK_ON_SUSPEND
+ | IRQCHIP_SKIP_SET_WAKE,
+};
+
+struct spmi_pmic_arb_irq_spec {
+ unsigned slave:4;
+ unsigned per:8;
+ unsigned irq:3;
+};
+
+static int search_mapping_table(struct spmi_pmic_arb_dev *pa,
+ struct spmi_pmic_arb_irq_spec *spec,
+ u8 *apid)
+{
+ u16 ppid = spec->slave << 8 | spec->per;
+ u32 *mapping_table = pa->mapping_table;
+ int index = 0, i;
+ u32 data;
+
+ for (i = 0; i < SPMI_MAPPING_TABLE_TREE_DEPTH; ++i) {
+ data = mapping_table[index];
+
+ if (ppid & (1 << SPMI_MAPPING_BIT_INDEX(data))) {
+ if (SPMI_MAPPING_BIT_IS_1_FLAG(data)) {
+ index = SPMI_MAPPING_BIT_IS_1_RESULT(data);
+ } else {
+ *apid = SPMI_MAPPING_BIT_IS_1_RESULT(data);
+ return 0;
+ }
+ } else {
+ if (SPMI_MAPPING_BIT_IS_0_FLAG(data)) {
+ index = SPMI_MAPPING_BIT_IS_0_RESULT(data);
+ } else {
+ *apid = SPMI_MAPPING_BIT_IS_0_RESULT(data);
+ return 0;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
+
+static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ struct spmi_pmic_arb_dev *pa = d->host_data;
+ struct spmi_pmic_arb_irq_spec spec;
+ int err;
+ u8 apid;
+
+ dev_dbg(&pa->spmic->dev,
+ "intspec[0] 0x%1x intspec[1] 0x%02x intspec[2] 0x%02x\n",
+ intspec[0], intspec[1], intspec[2]);
+
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize != 4)
+ return -EINVAL;
+ if (intspec[0] > 0xF || intspec[1] > 0xFF || intspec[2] > 0x7)
+ return -EINVAL;
+
+ spec.slave = intspec[0];
+ spec.per = intspec[1];
+ spec.irq = intspec[2];
+
+ err = search_mapping_table(pa, &spec, &apid);
+ if (err)
+ return err;
+
+ pa->apid_to_ppid[apid] = spec.slave << 8 | spec.per;
+
+ /* Keep track of {max,min}_apid for bounding search during interrupt */
+ if (apid > pa->max_apid)
+ pa->max_apid = apid;
+ if (apid < pa->min_apid)
+ pa->min_apid = apid;
+
+ *out_hwirq = spec.slave << 24
+ | spec.per << 16
+ | spec.irq << 8
+ | apid;
+ *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
+
+ dev_dbg(&pa->spmic->dev, "out_hwirq = %lu\n", *out_hwirq);
+
+ return 0;
+}
+
+static int qpnpint_irq_domain_map(struct irq_domain *d,
+ unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct spmi_pmic_arb_dev *pa = d->host_data;
+
+ dev_dbg(&pa->spmic->dev, "virq = %u, hwirq = %lu\n", virq, hwirq);
+
+ irq_set_chip_and_handler(virq, &pmic_arb_irqchip, handle_level_irq);
+ irq_set_chip_data(virq, d->host_data);
+ irq_set_noprobe(virq);
+ return 0;
+}
+
+static const struct irq_domain_ops pmic_arb_irq_domain_ops = {
+ .map = qpnpint_irq_domain_map,
+ .xlate = qpnpint_irq_domain_dt_translate,
+};
+
+static int spmi_pmic_arb_probe(struct platform_device *pdev)
+{
+ struct spmi_pmic_arb_dev *pa;
+ struct spmi_controller *ctrl;
+ struct resource *res;
+ u32 channel, ee;
+ int err, i;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa));
+ if (!ctrl)
+ return -ENOMEM;
+
+ pa = spmi_controller_get_drvdata(ctrl);
+ pa->spmic = ctrl;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
+ pa->base = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->base)) {
+ err = PTR_ERR(pa->base);
+ goto err_put_ctrl;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr");
+ pa->intr = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->intr)) {
+ err = PTR_ERR(pa->intr);
+ goto err_put_ctrl;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg");
+ pa->cnfg = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->cnfg)) {
+ err = PTR_ERR(pa->cnfg);
+ goto err_put_ctrl;
+ }
+
+ pa->irq = platform_get_irq_byname(pdev, "periph_irq");
+ if (pa->irq < 0) {
+ err = pa->irq;
+ goto err_put_ctrl;
+ }
+
+ err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
+ if (err) {
+ dev_err(&pdev->dev, "channel unspecified.\n");
+ goto err_put_ctrl;
+ }
+
+ if (channel > 5) {
+ dev_err(&pdev->dev, "invalid channel (%u) specified.\n",
+ channel);
+ goto err_put_ctrl;
+ }
+
+ pa->channel = channel;
+
+ err = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &ee);
+ if (err) {
+ dev_err(&pdev->dev, "EE unspecified.\n");
+ goto err_put_ctrl;
+ }
+
+ if (ee > 5) {
+ dev_err(&pdev->dev, "invalid EE (%u) specified\n", ee);
+ err = -EINVAL;
+ goto err_put_ctrl;
+ }
+
+ pa->ee = ee;
+
+ for (i = 0; i < ARRAY_SIZE(pa->mapping_table); ++i)
+ pa->mapping_table[i] = readl_relaxed(
+ pa->cnfg + SPMI_MAPPING_TABLE_REG(i));
+
+ /* Initialize max_apid/min_apid to the opposite bounds, during
+ * the irq domain translation, we are sure to update these */
+ pa->max_apid = 0;
+ pa->min_apid = PMIC_ARB_MAX_PERIPHS - 1;
+
+ platform_set_drvdata(pdev, ctrl);
+ raw_spin_lock_init(&pa->lock);
+
+ ctrl->cmd = pmic_arb_cmd;
+ ctrl->read_cmd = pmic_arb_read_cmd;
+ ctrl->write_cmd = pmic_arb_write_cmd;
+
+ dev_dbg(&pdev->dev, "adding irq domain\n");
+ pa->domain = irq_domain_add_tree(pdev->dev.of_node,
+ &pmic_arb_irq_domain_ops, pa);
+ if (!pa->domain) {
+ dev_err(&pdev->dev, "unable to create irq_domain\n");
+ err = -ENOMEM;
+ goto err_put_ctrl;
+ }
+
+ irq_set_handler_data(pa->irq, pa);
+ irq_set_chained_handler(pa->irq, pmic_arb_chained_irq);
+
+ err = spmi_controller_add(ctrl);
+ if (err)
+ goto err_domain_remove;
+
+ dev_dbg(&ctrl->dev, "PMIC Arb Version 0x%x\n",
+ pmic_arb_base_read(pa, PMIC_ARB_VERSION));
+
+ return 0;
+
+err_domain_remove:
+ irq_set_chained_handler(pa->irq, NULL);
+ irq_set_handler_data(pa->irq, NULL);
+ irq_domain_remove(pa->domain);
+err_put_ctrl:
+ spmi_controller_put(ctrl);
+ return err;
+}
+
+static int spmi_pmic_arb_remove(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+ struct spmi_pmic_arb_dev *pa = spmi_controller_get_drvdata(ctrl);
+ spmi_controller_remove(ctrl);
+ irq_set_chained_handler(pa->irq, NULL);
+ irq_set_handler_data(pa->irq, NULL);
+ irq_domain_remove(pa->domain);
+ spmi_controller_put(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_pmic_arb_match_table[] = {
+ { .compatible = "qcom,spmi-pmic-arb", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
+
+static struct platform_driver spmi_pmic_arb_driver = {
+ .probe = spmi_pmic_arb_probe,
+ .remove = spmi_pmic_arb_remove,
+ .driver = {
+ .name = "spmi_pmic_arb",
+ .owner = THIS_MODULE,
+ .of_match_table = spmi_pmic_arb_match_table,
+ },
+};
+module_platform_driver(spmi_pmic_arb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spmi_pmic_arb");
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
new file mode 100644
index 000000000000..3b5780710d50
--- /dev/null
+++ b/drivers/spmi/spmi.c
@@ -0,0 +1,574 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spmi.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/spmi/spmi.h>
+
+static DEFINE_IDA(ctrl_ida);
+
+static void spmi_dev_release(struct device *dev)
+{
+ struct spmi_device *sdev = to_spmi_device(dev);
+ kfree(sdev);
+}
+
+static const struct device_type spmi_dev_type = {
+ .release = spmi_dev_release,
+};
+
+static void spmi_ctrl_release(struct device *dev)
+{
+ struct spmi_controller *ctrl = to_spmi_controller(dev);
+ ida_simple_remove(&ctrl_ida, ctrl->nr);
+ kfree(ctrl);
+}
+
+static const struct device_type spmi_ctrl_type = {
+ .release = spmi_ctrl_release,
+};
+
+static int spmi_device_match(struct device *dev, struct device_driver *drv)
+{
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
+ if (drv->name)
+ return strncmp(dev_name(dev), drv->name,
+ SPMI_NAME_SIZE) == 0;
+
+ return 0;
+}
+
+/**
+ * spmi_device_add() - add a device previously constructed via spmi_device_alloc()
+ * @sdev: spmi_device to be added
+ */
+int spmi_device_add(struct spmi_device *sdev)
+{
+ struct spmi_controller *ctrl = sdev->ctrl;
+ int err;
+
+ dev_set_name(&sdev->dev, "%d-%02x", ctrl->nr, sdev->usid);
+
+ err = device_add(&sdev->dev);
+ if (err < 0) {
+ dev_err(&sdev->dev, "Can't add %s, status %d\n",
+ dev_name(&sdev->dev), err);
+ goto err_device_add;
+ }
+
+ dev_dbg(&sdev->dev, "device %s registered\n", dev_name(&sdev->dev));
+
+err_device_add:
+ return err;
+}
+EXPORT_SYMBOL_GPL(spmi_device_add);
+
+/**
+ * spmi_device_remove(): remove an SPMI device
+ * @sdev: spmi_device to be removed
+ */
+void spmi_device_remove(struct spmi_device *sdev)
+{
+ device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_device_remove);
+
+static inline int
+spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
+{
+ if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->cmd(ctrl, opcode, sid);
+}
+
+static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, u8 *buf, size_t len)
+{
+ if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, const u8 *buf, size_t len)
+{
+ if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+/**
+ * spmi_register_read() - register read
+ * @sdev: SPMI device.
+ * @addr: slave register address (5-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ *
+ * Reads 1 byte of data from a Slave device register.
+ */
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
+{
+ /* 5-bit register address */
+ if (addr > 0x1F)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr,
+ buf, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_read);
+
+/**
+ * spmi_ext_register_read() - extended register read
+ * @sdev: SPMI device.
+ * @addr: slave register address (8-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ * @len: the request number of bytes to read (up to 16 bytes).
+ *
+ * Reads up to 16 bytes of data from the extended register space on a
+ * Slave device.
+ */
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+ size_t len)
+{
+ /* 8-bit register address, up to 16 bytes */
+ if (len == 0 || len > 16)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READ, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_read);
+
+/**
+ * spmi_ext_register_readl() - extended register read long
+ * @sdev: SPMI device.
+ * @addr: slave register address (16-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ * @len: the request number of bytes to read (up to 8 bytes).
+ *
+ * Reads up to 8 bytes of data from the extended register space on a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+ size_t len)
+{
+ /* 16-bit register address, up to 8 bytes */
+ if (len == 0 || len > 8)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READL, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_readl);
+
+/**
+ * spmi_register_write() - register write
+ * @sdev: SPMI device
+ * @addr: slave register address (5-bit address).
+ * @data: buffer containing the data to be transferred to the Slave.
+ *
+ * Writes 1 byte of data to a Slave device register.
+ */
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data)
+{
+ /* 5-bit register address */
+ if (addr > 0x1F)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_WRITE, sdev->usid, addr,
+ &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_write);
+
+/**
+ * spmi_register_zero_write() - register zero write
+ * @sdev: SPMI device.
+ * @data: the data to be written to register 0 (7-bits).
+ *
+ * Writes data to register 0 of the Slave device.
+ */
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data)
+{
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_ZERO_WRITE, sdev->usid, 0,
+ &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_zero_write);
+
+/**
+ * spmi_ext_register_write() - extended register write
+ * @sdev: SPMI device.
+ * @addr: slave register address (8-bit address).
+ * @buf: buffer containing the data to be transferred to the Slave.
+ * @len: the request number of bytes to read (up to 16 bytes).
+ *
+ * Writes up to 16 bytes of data to the extended register space of a
+ * Slave device.
+ */
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr, const u8 *buf,
+ size_t len)
+{
+ /* 8-bit register address, up to 16 bytes */
+ if (len == 0 || len > 16)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITE, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_write);
+
+/**
+ * spmi_ext_register_writel() - extended register write long
+ * @sdev: SPMI device.
+ * @addr: slave register address (16-bit address).
+ * @buf: buffer containing the data to be transferred to the Slave.
+ * @len: the request number of bytes to read (up to 8 bytes).
+ *
+ * Writes up to 8 bytes of data to the extended register space of a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr, const u8 *buf,
+ size_t len)
+{
+ /* 4-bit Slave Identifier, 16-bit register address, up to 8 bytes */
+ if (len == 0 || len > 8)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITEL, sdev->usid,
+ addr, buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_writel);
+
+/**
+ * spmi_command_reset() - sends RESET command to the specified slave
+ * @sdev: SPMI device.
+ *
+ * The Reset command initializes the Slave and forces all registers to
+ * their reset values. The Slave shall enter the STARTUP state after
+ * receiving a Reset command.
+ */
+int spmi_command_reset(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_RESET, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_reset);
+
+/**
+ * spmi_command_sleep() - sends SLEEP command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Sleep command causes the Slave to enter the user defined SLEEP state.
+ */
+int spmi_command_sleep(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_SLEEP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_sleep);
+
+/**
+ * spmi_command_wakeup() - sends WAKEUP command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Wakeup command causes the Slave to move from the SLEEP state to
+ * the ACTIVE state.
+ */
+int spmi_command_wakeup(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_WAKEUP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_wakeup);
+
+/**
+ * spmi_command_shutdown() - sends SHUTDOWN command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Shutdown command causes the Slave to enter the SHUTDOWN state.
+ */
+int spmi_command_shutdown(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_SHUTDOWN, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_shutdown);
+
+static int spmi_drv_probe(struct device *dev)
+{
+ const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+ struct spmi_device *sdev = to_spmi_device(dev);
+ int err;
+
+ /* Ensure the slave is in ACTIVE state */
+ err = spmi_command_wakeup(sdev);
+ if (err)
+ goto fail_wakeup;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ err = sdrv->probe(sdev);
+ if (err)
+ goto fail_probe;
+
+ return 0;
+
+fail_probe:
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+fail_wakeup:
+ return err;
+}
+
+static int spmi_drv_remove(struct device *dev)
+{
+ const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+
+ pm_runtime_get_sync(dev);
+ sdrv->remove(to_spmi_device(dev));
+ pm_runtime_put_noidle(dev);
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+ return 0;
+}
+
+static struct bus_type spmi_bus_type = {
+ .name = "spmi",
+ .match = spmi_device_match,
+ .probe = spmi_drv_probe,
+ .remove = spmi_drv_remove,
+};
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI device
+ * @ctrl: associated controller
+ *
+ * Caller is responsible for either calling spmi_device_add() to add the
+ * newly allocated controller, or calling spmi_device_put() to discard it.
+ */
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
+{
+ struct spmi_device *sdev;
+
+ sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!sdev)
+ return NULL;
+
+ sdev->ctrl = ctrl;
+ device_initialize(&sdev->dev);
+ sdev->dev.parent = &ctrl->dev;
+ sdev->dev.bus = &spmi_bus_type;
+ sdev->dev.type = &spmi_dev_type;
+ return sdev;
+}
+EXPORT_SYMBOL_GPL(spmi_device_alloc);
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI controller
+ * @parent: parent device
+ * @size: size of private data
+ *
+ * Caller is responsible for either calling spmi_controller_add() to add the
+ * newly allocated controller, or calling spmi_controller_put() to discard it.
+ * The allocated private data region may be accessed via
+ * spmi_controller_get_drvdata()
+ */
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+ size_t size)
+{
+ struct spmi_controller *ctrl;
+ int id;
+
+ if (WARN_ON(!parent))
+ return NULL;
+
+ ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
+ if (!ctrl)
+ return NULL;
+
+ device_initialize(&ctrl->dev);
+ ctrl->dev.type = &spmi_ctrl_type;
+ ctrl->dev.bus = &spmi_bus_type;
+ ctrl->dev.parent = parent;
+ ctrl->dev.of_node = parent->of_node;
+ spmi_controller_set_drvdata(ctrl, &ctrl[1]);
+
+ id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ dev_err(parent,
+ "unable to allocate SPMI controller identifier.\n");
+ spmi_controller_put(ctrl);
+ return NULL;
+ }
+
+ ctrl->nr = id;
+ dev_set_name(&ctrl->dev, "spmi-%d", id);
+
+ dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
+ return ctrl;
+}
+EXPORT_SYMBOL_GPL(spmi_controller_alloc);
+
+static void of_spmi_register_devices(struct spmi_controller *ctrl)
+{
+ struct device_node *node;
+ int err;
+
+ if (!ctrl->dev.of_node)
+ return;
+
+ for_each_available_child_of_node(ctrl->dev.of_node, node) {
+ struct spmi_device *sdev;
+ u32 reg[2];
+
+ dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
+
+ err = of_property_read_u32_array(node, "reg", reg, 2);
+ if (err) {
+ dev_err(&ctrl->dev,
+ "node %s err (%d) does not have 'reg' property\n",
+ node->full_name, err);
+ continue;
+ }
+
+ if (reg[1] != SPMI_USID) {
+ dev_err(&ctrl->dev,
+ "node %s contains unsupported 'reg' entry\n",
+ node->full_name);
+ continue;
+ }
+
+ if (reg[0] >= SPMI_MAX_SLAVE_ID) {
+ dev_err(&ctrl->dev,
+ "invalid usid on node %s\n",
+ node->full_name);
+ continue;
+ }
+
+ dev_dbg(&ctrl->dev, "read usid %02x\n", reg[0]);
+
+ sdev = spmi_device_alloc(ctrl);
+ if (!sdev)
+ continue;
+
+ sdev->dev.of_node = node;
+ sdev->usid = (u8) reg[0];
+
+ err = spmi_device_add(sdev);
+ if (err) {
+ dev_err(&sdev->dev,
+ "failure adding device. status %d\n", err);
+ spmi_device_put(sdev);
+ }
+ }
+}
+
+/**
+ * spmi_controller_add() - Add an SPMI controller
+ * @ctrl: controller to be registered.
+ *
+ * Register a controller previously allocated via spmi_controller_alloc() with
+ * the SPMI core.
+ */
+int spmi_controller_add(struct spmi_controller *ctrl)
+{
+ int ret;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!spmi_bus_type.p))
+ return -EAGAIN;
+
+ ret = device_add(&ctrl->dev);
+ if (ret)
+ return ret;
+
+ if (IS_ENABLED(CONFIG_OF))
+ of_spmi_register_devices(ctrl);
+
+ dev_dbg(&ctrl->dev, "spmi-%d registered: dev:%p\n",
+ ctrl->nr, &ctrl->dev);
+
+ return 0;
+};
+EXPORT_SYMBOL_GPL(spmi_controller_add);
+
+/* Remove a device associated with a controller */
+static int spmi_ctrl_remove_device(struct device *dev, void *data)
+{
+ struct spmi_device *spmidev = to_spmi_device(dev);
+ if (dev->type == &spmi_dev_type)
+ spmi_device_remove(spmidev);
+ return 0;
+}
+
+/**
+ * spmi_controller_remove(): remove an SPMI controller
+ * @ctrl: controller to remove
+ *
+ * Remove a SPMI controller. Caller is responsible for calling
+ * spmi_controller_put() to discard the allocated controller.
+ */
+void spmi_controller_remove(struct spmi_controller *ctrl)
+{
+ int dummy;
+
+ if (!ctrl)
+ return;
+
+ dummy = device_for_each_child(&ctrl->dev, NULL,
+ spmi_ctrl_remove_device);
+ device_del(&ctrl->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_controller_remove);
+
+/**
+ * spmi_driver_register() - Register client driver with SPMI core
+ * @sdrv: client driver to be associated with client-device.
+ *
+ * This API will register the client driver with the SPMI framework.
+ * It is typically called from the driver's module-init function.
+ */
+int spmi_driver_register(struct spmi_driver *sdrv)
+{
+ sdrv->driver.bus = &spmi_bus_type;
+ return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(spmi_driver_register);
+
+static void __exit spmi_exit(void)
+{
+ bus_unregister(&spmi_bus_type);
+}
+module_exit(spmi_exit);
+
+static int __init spmi_init(void)
+{
+ return bus_register(&spmi_bus_type);
+}
+postcore_initcall(spmi_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SPMI module");
+MODULE_ALIAS("platform:spmi");
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index b269dbd47fc4..b1d7ee6e40b7 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -29,7 +29,6 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/extcon.h>
-#include <linux/extcon/of_extcon.h>
#include <linux/regulator/consumer.h>
#include <linux/usb/otg.h>
@@ -522,7 +521,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
dwc3_omap_enable_irqs(omap);
if (of_property_read_bool(node, "extcon")) {
- edev = of_extcon_get_extcon_dev(dev, 0);
+ edev = extcon_get_edev_by_phandle(dev, 0);
if (IS_ERR(edev)) {
dev_vdbg(dev, "couldn't get extcon device\n");
ret = -EPROBE_DEFER;
diff --git a/drivers/video/hyperv_fb.c b/drivers/video/hyperv_fb.c
index 130708f96430..e23392ec5af3 100644
--- a/drivers/video/hyperv_fb.c
+++ b/drivers/video/hyperv_fb.c
@@ -42,6 +42,7 @@
#include <linux/completion.h>
#include <linux/fb.h>
#include <linux/pci.h>
+#include <linux/efi.h>
#include <linux/hyperv.h>
@@ -212,6 +213,7 @@ struct synthvid_msg {
struct hvfb_par {
struct fb_info *info;
+ struct resource mem;
bool fb_ready; /* fb device is ready */
struct completion wait;
u32 synthvid_version;
@@ -460,13 +462,13 @@ static int synthvid_connect_vsp(struct hv_device *hdev)
goto error;
}
- if (par->synthvid_version == SYNTHVID_VERSION_WIN7) {
+ if (par->synthvid_version == SYNTHVID_VERSION_WIN7)
screen_depth = SYNTHVID_DEPTH_WIN7;
- screen_fb_size = SYNTHVID_FB_SIZE_WIN7;
- } else {
+ else
screen_depth = SYNTHVID_DEPTH_WIN8;
- screen_fb_size = SYNTHVID_FB_SIZE_WIN8;
- }
+
+ screen_fb_size = hdev->channel->offermsg.offer.
+ mmio_megabytes * 1024 * 1024;
return 0;
@@ -627,26 +629,46 @@ static void hvfb_get_option(struct fb_info *info)
/* Get framebuffer memory from Hyper-V video pci space */
static int hvfb_getmem(struct fb_info *info)
{
- struct pci_dev *pdev;
- ulong fb_phys;
+ struct hvfb_par *par = info->par;
+ struct pci_dev *pdev = NULL;
void __iomem *fb_virt;
+ int gen2vm = efi_enabled(EFI_BOOT);
+ int ret;
- pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
+ par->mem.name = KBUILD_MODNAME;
+ par->mem.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (gen2vm) {
+ ret = allocate_resource(&hyperv_mmio, &par->mem,
+ screen_fb_size,
+ 0, -1,
+ screen_fb_size,
+ NULL, NULL);
+ if (ret != 0) {
+ pr_err("Unable to allocate framebuffer memory\n");
+ return -ENODEV;
+ }
+ } else {
+ pdev = pci_get_device(PCI_VENDOR_ID_MICROSOFT,
PCI_DEVICE_ID_HYPERV_VIDEO, NULL);
- if (!pdev) {
- pr_err("Unable to find PCI Hyper-V video\n");
- return -ENODEV;
- }
+ if (!pdev) {
+ pr_err("Unable to find PCI Hyper-V video\n");
+ return -ENODEV;
+ }
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
- pci_resource_len(pdev, 0) < screen_fb_size)
- goto err1;
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
+ pci_resource_len(pdev, 0) < screen_fb_size)
+ goto err1;
- fb_phys = pci_resource_end(pdev, 0) - screen_fb_size + 1;
- if (!request_mem_region(fb_phys, screen_fb_size, KBUILD_MODNAME))
- goto err1;
+ par->mem.end = pci_resource_end(pdev, 0);
+ par->mem.start = par->mem.end - screen_fb_size + 1;
+ ret = request_resource(&pdev->resource[0], &par->mem);
+ if (ret != 0) {
+ pr_err("Unable to request framebuffer memory\n");
+ goto err1;
+ }
+ }
- fb_virt = ioremap(fb_phys, screen_fb_size);
+ fb_virt = ioremap(par->mem.start, screen_fb_size);
if (!fb_virt)
goto err2;
@@ -654,30 +676,44 @@ static int hvfb_getmem(struct fb_info *info)
if (!info->apertures)
goto err3;
- info->apertures->ranges[0].base = pci_resource_start(pdev, 0);
- info->apertures->ranges[0].size = pci_resource_len(pdev, 0);
- info->fix.smem_start = fb_phys;
+ if (gen2vm) {
+ info->apertures->ranges[0].base = screen_info.lfb_base;
+ info->apertures->ranges[0].size = screen_info.lfb_size;
+ remove_conflicting_framebuffers(info->apertures,
+ KBUILD_MODNAME, false);
+ } else {
+ info->apertures->ranges[0].base = pci_resource_start(pdev, 0);
+ info->apertures->ranges[0].size = pci_resource_len(pdev, 0);
+ }
+
+ info->fix.smem_start = par->mem.start;
info->fix.smem_len = screen_fb_size;
info->screen_base = fb_virt;
info->screen_size = screen_fb_size;
- pci_dev_put(pdev);
+ if (!gen2vm)
+ pci_dev_put(pdev);
+
return 0;
err3:
iounmap(fb_virt);
err2:
- release_mem_region(fb_phys, screen_fb_size);
+ release_resource(&par->mem);
err1:
- pci_dev_put(pdev);
+ if (!gen2vm)
+ pci_dev_put(pdev);
+
return -ENOMEM;
}
/* Release the framebuffer */
static void hvfb_putmem(struct fb_info *info)
{
+ struct hvfb_par *par = info->par;
+
iounmap(info->screen_base);
- release_mem_region(info->fix.smem_start, screen_fb_size);
+ release_resource(&par->mem);
}
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 256fba7f4641..1f38445014c1 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -190,7 +190,7 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
uvfb_tasks[seq] = task;
mutex_unlock(&uvfb_lock);
- err = cn_netlink_send(m, 0, GFP_KERNEL);
+ err = cn_netlink_send(m, 0, 0, GFP_KERNEL);
if (err == -ESRCH) {
/*
* Try to start the userspace helper if sending
@@ -204,7 +204,7 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
"helper is installed and executable\n");
} else {
v86d_started = 1;
- err = cn_netlink_send(m, 0, gfp_any());
+ err = cn_netlink_send(m, 0, 0, gfp_any());
if (err == -ENOBUFS)
err = 0;
}
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 1b5d48c578e1..bfb2d3f06738 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -869,14 +869,13 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
spin_lock(&image->lock);
- /* The following code handles VME address alignment problem
- * in order to assure the maximal data width cycle.
- * We cannot use memcpy_xxx directly here because it
- * may cut data transfer in 8-bits cycles, thus making
- * D16 cycle impossible.
- * From the other hand, the bridge itself assures that
- * maximal configured data cycle is used and splits it
- * automatically for non-aligned addresses.
+ /* The following code handles VME address alignment. We cannot use
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
+ * On the other hand, the bridge itself assures that the maximum data
+ * cycle configured for the transfer is used and splits it
+ * automatically for non-aligned addresses, so we don't want the
+ * overhead of needlessly forcing small transfers for the entire cycle.
*/
if ((uintptr_t)addr & 0x1) {
*(u8 *)buf = ioread8(addr);
@@ -896,9 +895,9 @@ static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, (unsigned int)count);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -930,7 +929,7 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -950,9 +949,9 @@ static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 9911cd5fddb5..06990c6a1a69 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -1276,8 +1276,8 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
spin_lock(&image->lock);
/* The following code handles VME address alignment. We cannot use
- * memcpy_xxx directly here because it may cut small data transfers in
- * to 8-bit cycles, thus making D16 cycle impossible.
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
* On the other hand, the bridge itself assures that the maximum data
* cycle configured for the transfer is used and splits it
* automatically for non-aligned addresses, so we don't want the
@@ -1301,9 +1301,9 @@ static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, count32);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -1363,7 +1363,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -1383,9 +1383,9 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index efc7f075fcbe..1708b2300c7a 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,13 +36,12 @@ config W1_MASTER_DS2482
config W1_MASTER_MXC
tristate "Freescale MXC 1-wire busmaster"
- depends on W1 && ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Say Y here to enable MXC 1-wire host
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 4f7e1d770f81..7404ad3062b7 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1,5 +1,5 @@
/*
- * dscore.c
+ * ds2490.c USB to one wire bridge
*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
@@ -28,6 +28,10 @@
#include "../w1_int.h"
#include "../w1.h"
+/* USB Standard */
+/* USB Control request vendor type */
+#define VENDOR 0x40
+
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
@@ -107,6 +111,8 @@
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
+/* Status transfer size, 16 bytes status, 16 byte result flags */
+#define ST_SIZE 0x20
/* Result Register flags */
#define RR_DETECT 0xA5 /* New device detected */
@@ -198,7 +204,7 @@ static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+ CONTROL_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
value, index, err);
@@ -213,7 +219,7 @@ static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+ MODE_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
value, index, err);
@@ -228,7 +234,7 @@ static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+ COMM_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
value, index, err);
@@ -246,7 +252,8 @@ static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
memset(st, 0, sizeof(*st));
count = 0;
- err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
+ err = usb_interrupt_msg(dev->udev, usb_rcvintpipe(dev->udev,
+ dev->ep[EP_STATUS]), buf, size, &count, 100);
if (err < 0) {
printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
return err;
@@ -353,7 +360,7 @@ static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
buf, size, &count, 1000);
if (err < 0) {
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int count;
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
@@ -398,7 +405,7 @@ int ds_stop_pulse(struct ds_device *dev, int limit)
{
struct ds_status st;
int count = 0, err = 0;
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
do {
err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
@@ -450,10 +457,11 @@ int ds_detect(struct ds_device *dev, struct ds_status *st)
static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
{
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int err, count = 0;
do {
+ st->status = 0;
err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
#if 0
if (err >= 0) {
@@ -464,7 +472,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
printk("\n");
}
#endif
- } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
+ } while (!(st->status & ST_IDLE) && !(err < 0) && ++count < 100);
if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -690,37 +698,106 @@ static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
return !(err == len);
}
-#if 0
-
-static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+static void ds9490r_search(void *data, struct w1_master *master,
+ u8 search_type, w1_slave_found_callback callback)
{
+ /* When starting with an existing id, the first id returned will
+ * be that device (if it is still on the bus most likely).
+ *
+ * If the number of devices found is less than or equal to the
+ * search_limit, that number of IDs will be returned. If there are
+ * more, search_limit IDs will be returned followed by a non-zero
+ * discrepency value.
+ */
+ struct ds_device *dev = data;
int err;
u16 value, index;
struct ds_status st;
+ u8 st_buf[ST_SIZE];
+ int search_limit;
+ int found = 0;
+ int i;
- memset(buf, 0, sizeof(buf));
+ /* DS18b20 spec, 13.16 ms per device, 75 per second, sleep for
+ * discovering 8 devices (1 bulk transfer and 1/2 FIFO size) at a time.
+ */
+ const unsigned long jtime = msecs_to_jiffies(1000*8/75);
+ /* FIFO 128 bytes, bulk packet size 64, read a multiple of the
+ * packet size.
+ */
+ u64 buf[2*64/8];
- err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
- if (err)
- return err;
+ mutex_lock(&master->bus_mutex);
- ds_wait_status(ds_dev, &st);
+ /* address to start searching at */
+ if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0)
+ goto search_out;
+ master->search_id = 0;
- value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
- index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
- err = ds_send_control(ds_dev, value, index);
- if (err)
- return err;
+ value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F |
+ COMM_RTS;
+ search_limit = master->max_slave_count;
+ if (search_limit > 255)
+ search_limit = 0;
+ index = search_type | (search_limit << 8);
+ if (ds_send_control(dev, value, index) < 0)
+ goto search_out;
- ds_wait_status(ds_dev, &st);
+ do {
+ schedule_timeout(jtime);
- err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
- if (err < 0)
- return err;
+ if (ds_recv_status_nodump(dev, &st, st_buf, sizeof(st_buf)) <
+ sizeof(st)) {
+ break;
+ }
- return err/8;
+ if (st.data_in_buffer_status) {
+ /* Bulk in can receive partial ids, but when it does
+ * they fail crc and will be discarded anyway.
+ * That has only been seen when status in buffer
+ * is 0 and bulk is read anyway, so don't read
+ * bulk without first checking if status says there
+ * is data to read.
+ */
+ err = ds_recv_data(dev, (u8 *)buf, sizeof(buf));
+ if (err < 0)
+ break;
+ for (i = 0; i < err/8; ++i) {
+ ++found;
+ if (found <= search_limit)
+ callback(master, buf[i]);
+ /* can't know if there will be a discrepancy
+ * value after until the next id */
+ if (found == search_limit)
+ master->search_id = buf[i];
+ }
+ }
+
+ if (test_bit(W1_ABORT_SEARCH, &master->flags))
+ break;
+ } while (!(st.status & (ST_IDLE | ST_HALT)));
+
+ /* only continue the search if some weren't found */
+ if (found <= search_limit) {
+ master->search_id = 0;
+ } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->udev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ master->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &master->flags);
+ }
+search_out:
+ mutex_unlock(&master->bus_mutex);
}
+#if 0
static int ds_match_access(struct ds_device *dev, u64 init)
{
int err;
@@ -894,6 +971,7 @@ static int ds_w1_init(struct ds_device *dev)
dev->master.write_block = &ds9490r_write_block;
dev->master.reset_bus = &ds9490r_reset;
dev->master.set_pullup = &ds9490r_set_pullup;
+ dev->master.search = &ds9490r_search;
return w1_add_master_device(&dev->master);
}
@@ -910,15 +988,13 @@ static int ds_probe(struct usb_interface *intf,
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
struct ds_device *dev;
- int i, err;
+ int i, err, alt;
- dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct ds_device), GFP_KERNEL);
if (!dev) {
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
return -ENOMEM;
}
- dev->spu_sleep = 0;
- dev->spu_bit = 0;
dev->udev = usb_get_dev(udev);
if (!dev->udev) {
err = -ENOMEM;
@@ -928,20 +1004,25 @@ static int ds_probe(struct usb_interface *intf,
usb_set_intfdata(intf, dev);
- err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
+ err = usb_reset_configuration(dev->udev);
if (err) {
- printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
- intf->altsetting[0].desc.bInterfaceNumber, err);
+ dev_err(&dev->udev->dev,
+ "Failed to reset configuration: err=%d.\n", err);
goto err_out_clear;
}
- err = usb_reset_configuration(dev->udev);
+ /* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */
+ alt = 3;
+ err = usb_set_interface(dev->udev,
+ intf->altsetting[alt].desc.bInterfaceNumber, alt);
if (err) {
- printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
+ dev_err(&dev->udev->dev, "Failed to set alternative setting %d "
+ "for %d interface: err=%d.\n", alt,
+ intf->altsetting[alt].desc.bInterfaceNumber, err);
goto err_out_clear;
}
- iface_desc = &intf->altsetting[0];
+ iface_desc = &intf->altsetting[alt];
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
err = -EINVAL;
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 1e5d94c5afc9..67b067a3e2ab 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -10,24 +10,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
*/
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include "../w1.h"
#include "../w1_int.h"
-#include "../w1_log.h"
/* According to the mx27 Datasheet the reset procedure should take up to about
* 1350us. We set the timeout to 500*100us = 50ms for sure */
@@ -36,13 +28,13 @@
/*
* MXC W1 Register offsets
*/
-#define MXC_W1_CONTROL 0x00
-#define MXC_W1_TIME_DIVIDER 0x02
-#define MXC_W1_RESET 0x04
-#define MXC_W1_COMMAND 0x06
-#define MXC_W1_TXRX 0x08
-#define MXC_W1_INTERRUPT 0x0A
-#define MXC_W1_INTERRUPT_EN 0x0C
+#define MXC_W1_CONTROL 0x00
+# define MXC_W1_CONTROL_RDST BIT(3)
+# define MXC_W1_CONTROL_WR(x) BIT(5 - (x))
+# define MXC_W1_CONTROL_PST BIT(6)
+# define MXC_W1_CONTROL_RPP BIT(7)
+#define MXC_W1_TIME_DIVIDER 0x02
+#define MXC_W1_RESET 0x04
struct mxc_w1_device {
void __iomem *regs;
@@ -61,12 +53,12 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
unsigned int timeout_cnt = 0;
struct mxc_w1_device *dev = data;
- __raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL));
+ writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
while (1) {
- reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL);
+ reg_val = readb(dev->regs + MXC_W1_CONTROL);
- if (((reg_val >> 7) & 0x1) == 0 ||
+ if (!(reg_val & MXC_W1_CONTROL_RPP) ||
timeout_cnt > MXC_W1_RESET_TIMEOUT)
break;
else
@@ -74,7 +66,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data)
udelay(100);
}
- return (reg_val >> 7) & 0x1;
+ return !!(reg_val & MXC_W1_CONTROL_PST);
}
/*
@@ -90,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
* datasheet.
*/
- __raw_writeb((1 << (5 - bit)), ctrl_addr);
+ writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr);
while (timeout_cnt--) {
- if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1))
+ if (!(readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit)))
break;
udelay(1);
}
- return ((__raw_readb(ctrl_addr)) >> 3) & 0x1;
+ return !!(readb(ctrl_addr) & MXC_W1_CONTROL_RDST);
}
static int mxc_w1_probe(struct platform_device *pdev)
@@ -139,7 +131,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
if (err)
return err;
- __raw_writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
+ writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
mdev->bus_master.data = mdev;
mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
@@ -177,6 +169,7 @@ MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
static struct platform_driver mxc_w1_driver = {
.driver = {
.name = "mxc_w1",
+ .owner = THIS_MODULE,
.of_match_table = mxc_w1_dt_ids,
},
.probe = mxc_w1_probe,
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9709b8b484ba..1d111e56c8c8 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -89,11 +89,22 @@ static int w1_gpio_probe_dt(struct platform_device *pdev)
pdata->is_open_drain = 1;
gpio = of_get_gpio(np, 0);
- if (gpio < 0)
+ if (gpio < 0) {
+ if (gpio != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to parse gpio property for data pin (%d)\n",
+ gpio);
+
return gpio;
+ }
pdata->pin = gpio;
- pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
+ gpio = of_get_gpio(np, 1);
+ if (gpio == -EPROBE_DEFER)
+ return gpio;
+ /* ignore other errors as the pullup gpio is optional */
+ pdata->ext_pullup_enable_pin = gpio;
+
pdev->dev.platform_data = pdata;
return 0;
@@ -107,10 +118,8 @@ static int w1_gpio_probe(struct platform_device *pdev)
if (of_have_populated_dt()) {
err = w1_gpio_probe_dt(pdev);
- if (err < 0) {
- dev_err(&pdev->dev, "Failed to parse DT\n");
+ if (err < 0)
return err;
- }
}
pdata = dev_get_platdata(&pdev->dev);
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 5e6a3c9e510b..1cdce80b6abf 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -72,7 +72,6 @@ config W1_SLAVE_DS2433_CRC
config W1_SLAVE_DS2760
tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
- depends on W1
help
If you enable this you will have the DS2760 battery monitor
chip support.
@@ -85,7 +84,6 @@ config W1_SLAVE_DS2760
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2780 battery monitor
chip support.
@@ -98,7 +96,6 @@ config W1_SLAVE_DS2780
config W1_SLAVE_DS2781
tristate "Dallas 2781 battery monitor chip"
- depends on W1
help
If you enable this you will have the DS2781 battery monitor
chip support.
@@ -111,7 +108,6 @@ config W1_SLAVE_DS2781
config W1_SLAVE_DS28E04
tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
- depends on W1
select CRC16
help
If you enable this you will have the DS28E04-100
@@ -124,7 +120,6 @@ config W1_SLAVE_DS28E04
config W1_SLAVE_BQ27000
tristate "BQ27000 slave support"
- depends on W1
help
Say Y here if you want to use a hdq
bq27000 slave support.
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 8b5ff33f72cf..1f11a20a8ab9 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -27,6 +27,7 @@
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "../w1.h"
@@ -58,6 +59,19 @@ MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS28EA00));
static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
+static int w1_therm_add_slave(struct w1_slave *sl)
+{
+ sl->family_data = kzalloc(9, GFP_KERNEL);
+ if (!sl->family_data)
+ return -ENOMEM;
+ return 0;
+}
+
+static void w1_therm_remove_slave(struct w1_slave *sl)
+{
+ kfree(sl->family_data);
+ sl->family_data = NULL;
+}
static ssize_t w1_slave_show(struct device *device,
struct device_attribute *attr, char *buf);
@@ -71,6 +85,8 @@ static struct attribute *w1_therm_attrs[] = {
ATTRIBUTE_GROUPS(w1_therm);
static struct w1_family_ops w1_therm_fops = {
+ .add_slave = w1_therm_add_slave,
+ .remove_slave = w1_therm_remove_slave,
.groups = w1_therm_groups,
};
@@ -253,12 +269,13 @@ static ssize_t w1_slave_show(struct device *device,
c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n",
crc, (verdict) ? "YES" : "NO");
if (verdict)
- memcpy(sl->rom, rom, sizeof(sl->rom));
+ memcpy(sl->family_data, rom, sizeof(rom));
else
dev_warn(device, "Read failed CRC check\n");
for (i = 0; i < 9; ++i)
- c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", sl->rom[i]);
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ",
+ ((u8 *)sl->family_data)[i]);
c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
w1_convert_temp(rom, sl->family->fid));
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 66efa96c4603..b96f61b15dc6 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -46,18 +46,29 @@ MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol.");
static int w1_timeout = 10;
-int w1_max_slave_count = 10;
+int w1_max_slave_count = 64;
int w1_max_slave_ttl = 10;
module_param_named(timeout, w1_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");
+/* A search stops when w1_max_slave_count devices have been found in that
+ * search. The next search will start over and detect the same set of devices
+ * on a static 1-wire bus. Memory is not allocated based on this number, just
+ * on the number of devices known to the kernel. Having a high number does not
+ * consume additional resources. As a special case, if there is only one
+ * device on the network and w1_max_slave_count is set to 1, the device id can
+ * be read directly skipping the normal slower search process.
+ */
module_param_named(max_slave_count, w1_max_slave_count, int, 0);
+MODULE_PARM_DESC(max_slave_count,
+ "maximum number of slaves detected in a search");
module_param_named(slave_ttl, w1_max_slave_ttl, int, 0);
+MODULE_PARM_DESC(slave_ttl,
+ "Number of searches not seeing a slave before it will be removed");
DEFINE_MUTEX(w1_mlock);
LIST_HEAD(w1_masters);
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-
static int w1_master_match(struct device *dev, struct device_driver *drv)
{
return 1;
@@ -81,19 +92,10 @@ static void w1_slave_release(struct device *dev)
{
struct w1_slave *sl = dev_to_w1_slave(dev);
- dev_dbg(dev, "%s: Releasing %s.\n", __func__, sl->name);
-
- while (atomic_read(&sl->refcnt)) {
- dev_dbg(dev, "Waiting for %s to become free: refcnt=%d.\n",
- sl->name, atomic_read(&sl->refcnt));
- if (msleep_interruptible(1000))
- flush_signals(current);
- }
+ dev_dbg(dev, "%s: Releasing %s [%p]\n", __func__, sl->name, sl);
w1_family_put(sl->family);
sl->master->slave_count--;
-
- complete(&sl->released);
}
static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -243,7 +245,9 @@ static ssize_t w1_master_attribute_store_search(struct device * dev,
mutex_lock(&md->mutex);
md->search_count = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
+ /* Only wake if it is going to be searching. */
+ if (tmp)
+ wake_up_process(md->thread);
return count;
}
@@ -277,7 +281,6 @@ static ssize_t w1_master_attribute_store_pullup(struct device *dev,
mutex_lock(&md->mutex);
md->enable_pullup = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
return count;
}
@@ -314,6 +317,24 @@ static ssize_t w1_master_attribute_show_timeout(struct device *dev, struct devic
return count;
}
+static ssize_t w1_master_attribute_store_max_slave_count(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int tmp;
+ struct w1_master *md = dev_to_w1_master(dev);
+
+ if (kstrtoint(buf, 0, &tmp) == -EINVAL || tmp < 1)
+ return -EINVAL;
+
+ mutex_lock(&md->mutex);
+ md->max_slave_count = tmp;
+ /* allow each time the max_slave_count is updated */
+ clear_bit(W1_WARN_MAX_COUNT, &md->flags);
+ mutex_unlock(&md->mutex);
+
+ return count;
+}
+
static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w1_master *md = dev_to_w1_master(dev);
@@ -352,23 +373,20 @@ static ssize_t w1_master_attribute_show_slaves(struct device *dev,
{
struct w1_master *md = dev_to_w1_master(dev);
int c = PAGE_SIZE;
+ struct list_head *ent, *n;
+ struct w1_slave *sl = NULL;
- mutex_lock(&md->mutex);
-
- if (md->slave_count == 0)
- c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- else {
- struct list_head *ent, *n;
- struct w1_slave *sl;
+ mutex_lock(&md->list_mutex);
- list_for_each_safe(ent, n, &md->slist) {
- sl = list_entry(ent, struct w1_slave, w1_slave_entry);
+ list_for_each_safe(ent, n, &md->slist) {
+ sl = list_entry(ent, struct w1_slave, w1_slave_entry);
- c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
- }
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
}
+ if (!sl)
+ c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- mutex_unlock(&md->mutex);
+ mutex_unlock(&md->list_mutex);
return PAGE_SIZE - c;
}
@@ -422,19 +440,22 @@ static int w1_atoreg_num(struct device *dev, const char *buf, size_t count,
}
/* Searches the slaves in the w1_master and returns a pointer or NULL.
- * Note: must hold the mutex
+ * Note: must not hold list_mutex
*/
-static struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
struct w1_reg_num *rn)
{
struct w1_slave *sl;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == rn->family &&
sl->reg_num.id == rn->id &&
sl->reg_num.crc == rn->crc) {
+ mutex_unlock(&dev->list_mutex);
return sl;
}
}
+ mutex_unlock(&dev->list_mutex);
return NULL;
}
@@ -491,7 +512,10 @@ static ssize_t w1_master_attribute_store_remove(struct device *dev,
mutex_lock(&md->mutex);
sl = w1_slave_search_device(md, &rn);
if (sl) {
- w1_slave_detach(sl);
+ result = w1_slave_detach(sl);
+ /* refcnt 0 means it was detached in the call */
+ if (result == 0)
+ result = count;
} else {
dev_info(dev, "Device %02x-%012llx doesn't exists\n", rn.family,
(unsigned long long)rn.id);
@@ -516,7 +540,7 @@ static ssize_t w1_master_attribute_store_remove(struct device *dev,
static W1_MASTER_ATTR_RO(name, S_IRUGO);
static W1_MASTER_ATTR_RO(slaves, S_IRUGO);
static W1_MASTER_ATTR_RO(slave_count, S_IRUGO);
-static W1_MASTER_ATTR_RO(max_slave_count, S_IRUGO);
+static W1_MASTER_ATTR_RW(max_slave_count, S_IRUGO | S_IWUSR | S_IWGRP);
static W1_MASTER_ATTR_RO(attempts, S_IRUGO);
static W1_MASTER_ATTR_RO(timeout, S_IRUGO);
static W1_MASTER_ATTR_RO(pointer, S_IRUGO);
@@ -686,12 +710,14 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
dev_set_uevent_suppress(&sl->dev, false);
kobject_uevent(&sl->dev.kobj, KOBJ_ADD);
+ mutex_lock(&sl->master->list_mutex);
list_add_tail(&sl->w1_slave_entry, &sl->master->slist);
+ mutex_unlock(&sl->master->list_mutex);
return 0;
}
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
{
struct w1_slave *sl;
struct w1_family *f;
@@ -713,8 +739,8 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
memset(&msg, 0, sizeof(msg));
memcpy(&sl->reg_num, rn, sizeof(sl->reg_num));
- atomic_set(&sl->refcnt, 0);
- init_completion(&sl->released);
+ atomic_set(&sl->refcnt, 1);
+ atomic_inc(&sl->master->refcnt);
/* slave modules need to be loaded in a context with unlocked mutex */
mutex_unlock(&dev->mutex);
@@ -754,23 +780,48 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
return 0;
}
-void w1_slave_detach(struct w1_slave *sl)
+int w1_unref_slave(struct w1_slave *sl)
{
- struct w1_netlink_msg msg;
-
- dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__, sl->name, sl);
-
- list_del(&sl->w1_slave_entry);
-
- memset(&msg, 0, sizeof(msg));
- memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
- msg.type = W1_SLAVE_REMOVE;
- w1_netlink_send(sl->master, &msg);
-
- device_unregister(&sl->dev);
+ struct w1_master *dev = sl->master;
+ int refcnt;
+ mutex_lock(&dev->list_mutex);
+ refcnt = atomic_sub_return(1, &sl->refcnt);
+ if (refcnt == 0) {
+ struct w1_netlink_msg msg;
+
+ dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__,
+ sl->name, sl);
+
+ list_del(&sl->w1_slave_entry);
+
+ memset(&msg, 0, sizeof(msg));
+ memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
+ msg.type = W1_SLAVE_REMOVE;
+ w1_netlink_send(sl->master, &msg);
+
+ device_unregister(&sl->dev);
+ #ifdef DEBUG
+ memset(sl, 0, sizeof(*sl));
+ #endif
+ kfree(sl);
+ }
+ atomic_dec(&dev->refcnt);
+ mutex_unlock(&dev->list_mutex);
+ return refcnt;
+}
- wait_for_completion(&sl->released);
- kfree(sl);
+int w1_slave_detach(struct w1_slave *sl)
+{
+ /* Only detach a slave once as it decreases the refcnt each time. */
+ int destroy_now;
+ mutex_lock(&sl->master->list_mutex);
+ destroy_now = !test_bit(W1_SLAVE_DETACH, &sl->flags);
+ set_bit(W1_SLAVE_DETACH, &sl->flags);
+ mutex_unlock(&sl->master->list_mutex);
+
+ if (destroy_now)
+ destroy_now = !w1_unref_slave(sl);
+ return destroy_now ? 0 : -EBUSY;
}
struct w1_master *w1_search_master_id(u32 id)
@@ -799,7 +850,7 @@ struct w1_slave *w1_search_slave(struct w1_reg_num *id)
mutex_lock(&w1_mlock);
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
- mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == id->family &&
sl->reg_num.id == id->id &&
@@ -810,7 +861,7 @@ struct w1_slave *w1_search_slave(struct w1_reg_num *id)
break;
}
}
- mutex_unlock(&dev->mutex);
+ mutex_unlock(&dev->list_mutex);
if (found)
break;
@@ -830,6 +881,7 @@ void w1_reconnect_slaves(struct w1_family *f, int attach)
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"for family %02x.\n", dev->name, f->fid);
mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
/* If it is a new family, slaves with the default
* family driver and are that family will be
@@ -841,14 +893,19 @@ void w1_reconnect_slaves(struct w1_family *f, int attach)
(!attach && sl->family->fid == f->fid)) {
struct w1_reg_num rn;
+ mutex_unlock(&dev->list_mutex);
memcpy(&rn, &sl->reg_num, sizeof(rn));
- w1_slave_detach(sl);
-
- w1_attach_slave_device(dev, &rn);
+ /* If it was already in use let the automatic
+ * scan pick it up again later.
+ */
+ if (!w1_slave_detach(sl))
+ w1_attach_slave_device(dev, &rn);
+ mutex_lock(&dev->list_mutex);
}
}
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"has been finished.\n", dev->name);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
}
mutex_unlock(&w1_mlock);
@@ -876,7 +933,12 @@ void w1_slave_found(struct w1_master *dev, u64 rn)
}
/**
- * Performs a ROM Search & registers any devices found.
+ * w1_search() - Performs a ROM Search & registers any devices found.
+ * @dev: The master device to search
+ * @search_type: W1_SEARCH to search all devices, or W1_ALARM_SEARCH
+ * to return only devices in the alarmed state
+ * @cb: Function to call when a device is found
+ *
* The 1-wire search is a simple binary tree search.
* For each bit of the address, we read two bits and write one bit.
* The bit written will put to sleep all devies that don't match that bit.
@@ -886,8 +948,6 @@ void w1_slave_found(struct w1_master *dev, u64 rn)
*
* See "Application note 187 1-wire search algorithm" at www.maxim-ic.com
*
- * @dev The master device to search
- * @cb Function to call when a device is found
*/
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
{
@@ -898,7 +958,8 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
u8 triplet_ret = 0;
search_bit = 0;
- rn = last_rn = 0;
+ rn = dev->search_id;
+ last_rn = 0;
last_device = 0;
last_zero = -1;
@@ -945,7 +1006,7 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
else
search_bit = ((last_rn >> i) & 0x1);
- /** Read two bits and write one bit */
+ /* Read two bits and write one bit */
triplet_ret = w1_triplet(dev, search_bit);
/* quit if no device responded */
@@ -960,8 +1021,7 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- /* ensure we're called from kthread and not by netlink callback */
- if (!dev->priv && kthread_should_stop()) {
+ if (test_bit(W1_ABORT_SEARCH, &dev->flags)) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
@@ -970,11 +1030,30 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
mutex_unlock(&dev->bus_mutex);
if ( (triplet_ret & 0x03) != 0x03 ) {
- if ( (desc_bit == last_zero) || (last_zero < 0))
+ if ((desc_bit == last_zero) || (last_zero < 0)) {
last_device = 1;
+ dev->search_id = 0;
+ } else {
+ dev->search_id = rn;
+ }
desc_bit = last_zero;
cb(dev, rn);
}
+
+ if (!last_device && slave_count == dev->max_slave_count &&
+ !test_bit(W1_WARN_MAX_COUNT, &dev->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ dev->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &dev->flags);
+ }
}
}
@@ -983,17 +1062,24 @@ void w1_search_process_cb(struct w1_master *dev, u8 search_type,
{
struct w1_slave *sl, *sln;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry)
clear_bit(W1_SLAVE_ACTIVE, &sl->flags);
+ mutex_unlock(&dev->list_mutex);
w1_search_devices(dev, search_type, cb);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
- if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl)
+ if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
else if (test_bit(W1_SLAVE_ACTIVE, &sl->flags))
sl->ttl = dev->slave_ttl;
}
+ mutex_unlock(&dev->list_mutex);
if (dev->search_count > 0)
dev->search_count--;
@@ -1004,6 +1090,32 @@ static void w1_search_process(struct w1_master *dev, u8 search_type)
w1_search_process_cb(dev, search_type, w1_slave_found);
}
+/**
+ * w1_process_callbacks() - execute each dev->async_list callback entry
+ * @dev: w1_master device
+ *
+ * Return: 1 if there were commands to executed 0 otherwise
+ */
+int w1_process_callbacks(struct w1_master *dev)
+{
+ int ret = 0;
+ struct w1_async_cmd *async_cmd, *async_n;
+
+ /* The list can be added to in another thread, loop until it is empty */
+ while (!list_empty(&dev->async_list)) {
+ list_for_each_entry_safe(async_cmd, async_n, &dev->async_list,
+ async_entry) {
+ /* drop the lock, if it is a search it can take a long
+ * time */
+ mutex_unlock(&dev->list_mutex);
+ async_cmd->cb(dev, async_cmd);
+ ret = 1;
+ mutex_lock(&dev->list_mutex);
+ }
+ }
+ return ret;
+}
+
int w1_process(void *data)
{
struct w1_master *dev = (struct w1_master *) data;
@@ -1011,23 +1123,46 @@ int w1_process(void *data)
* time can be calculated in jiffies once.
*/
const unsigned long jtime = msecs_to_jiffies(w1_timeout * 1000);
+ /* remainder if it woke up early */
+ unsigned long jremain = 0;
- while (!kthread_should_stop()) {
- if (dev->search_count) {
+ for (;;) {
+
+ if (!jremain && dev->search_count) {
mutex_lock(&dev->mutex);
w1_search_process(dev, W1_SEARCH);
mutex_unlock(&dev->mutex);
}
+ mutex_lock(&dev->list_mutex);
+ /* Note, w1_process_callback drops the lock while processing,
+ * but locks it again before returning.
+ */
+ if (!w1_process_callbacks(dev) && jremain) {
+ /* a wake up is either to stop the thread, process
+ * callbacks, or search, it isn't process callbacks, so
+ * schedule a search.
+ */
+ jremain = 1;
+ }
+
try_to_freeze();
__set_current_state(TASK_INTERRUPTIBLE);
+ /* hold list_mutex until after interruptible to prevent loosing
+ * the wakeup signal when async_cmd is added.
+ */
+ mutex_unlock(&dev->list_mutex);
+
if (kthread_should_stop())
break;
/* Only sleep when the search is active. */
- if (dev->search_count)
- schedule_timeout(jtime);
+ if (dev->search_count) {
+ if (!jremain)
+ jremain = jtime;
+ jremain = schedule_timeout(jremain);
+ }
else
schedule();
}
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index ca8081a101d6..734dab7fc687 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -22,6 +22,13 @@
#ifndef __W1_H
#define __W1_H
+/**
+ * struct w1_reg_num - broken out slave device id
+ *
+ * @family: identifies the type of device
+ * @id: along with family is the unique device id
+ * @crc: checksum of the other bytes
+ */
struct w1_reg_num
{
#if defined(__LITTLE_ENDIAN_BITFIELD)
@@ -58,7 +65,24 @@ struct w1_reg_num
#define W1_RESUME_CMD 0xA5
#define W1_SLAVE_ACTIVE 0
+#define W1_SLAVE_DETACH 1
+/**
+ * struct w1_slave - holds a single slave device on the bus
+ *
+ * @owner: Points to the one wire "wire" kernel module.
+ * @name: Device id is ascii.
+ * @w1_slave_entry: data for the linked list
+ * @reg_num: the slave id in binary
+ * @refcnt: reference count, delete when 0
+ * @flags: bit flags for W1_SLAVE_ACTIVE W1_SLAVE_DETACH
+ * @ttl: decrement per search this slave isn't found, deatch at 0
+ * @master: bus which this slave is on
+ * @family: module for device family type
+ * @family_data: pointer for use by the family module
+ * @dev: kernel device identifier
+ *
+ */
struct w1_slave
{
struct module *owner;
@@ -66,7 +90,6 @@ struct w1_slave
struct list_head w1_slave_entry;
struct w1_reg_num reg_num;
atomic_t refcnt;
- u8 rom[9];
int ttl;
unsigned long flags;
@@ -74,99 +97,146 @@ struct w1_slave
struct w1_family *family;
void *family_data;
struct device dev;
- struct completion released;
};
typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
/**
+ * struct w1_bus_master - operations available on a bus master
+ *
+ * @data: the first parameter in all the functions below
+ *
+ * @read_bit: Sample the line level @return the level read (0 or 1)
+ *
+ * @write_bit: Sets the line level
+ *
+ * @touch_bit: the lowest-level function for devices that really support the
+ * 1-wire protocol.
+ * touch_bit(0) = write-0 cycle
+ * touch_bit(1) = write-1 / read cycle
+ * @return the bit read (0 or 1)
+ *
+ * @read_byte: Reads a bytes. Same as 8 touch_bit(1) calls.
+ * @return the byte read
+ *
+ * @write_byte: Writes a byte. Same as 8 touch_bit(x) calls.
+ *
+ * @read_block: Same as a series of read_byte() calls
+ * @return the number of bytes read
+ *
+ * @write_block: Same as a series of write_byte() calls
+ *
+ * @triplet: Combines two reads and a smart write for ROM searches
+ * @return bit0=Id bit1=comp_id bit2=dir_taken
+ *
+ * @reset_bus: long write-0 with a read for the presence pulse detection
+ * @return -1=Error, 0=Device present, 1=No device present
+ *
+ * @set_pullup: Put out a strong pull-up pulse of the specified duration.
+ * @return -1=Error, 0=completed
+ *
+ * @search: Really nice hardware can handles the different types of ROM search
+ * w1_master* is passed to the slave found callback.
+ * u8 is search_type, W1_SEARCH or W1_ALARM_SEARCH
+ *
* Note: read_bit and write_bit are very low level functions and should only
* be used with hardware that doesn't really support 1-wire operations,
* like a parallel/serial port.
* Either define read_bit and write_bit OR define, at minimum, touch_bit and
* reset_bus.
+ *
*/
struct w1_bus_master
{
- /** the first parameter in all the functions below */
void *data;
- /**
- * Sample the line level
- * @return the level read (0 or 1)
- */
u8 (*read_bit)(void *);
- /** Sets the line level */
void (*write_bit)(void *, u8);
- /**
- * touch_bit is the lowest-level function for devices that really
- * support the 1-wire protocol.
- * touch_bit(0) = write-0 cycle
- * touch_bit(1) = write-1 / read cycle
- * @return the bit read (0 or 1)
- */
u8 (*touch_bit)(void *, u8);
- /**
- * Reads a bytes. Same as 8 touch_bit(1) calls.
- * @return the byte read
- */
u8 (*read_byte)(void *);
- /**
- * Writes a byte. Same as 8 touch_bit(x) calls.
- */
void (*write_byte)(void *, u8);
- /**
- * Same as a series of read_byte() calls
- * @return the number of bytes read
- */
u8 (*read_block)(void *, u8 *, int);
- /** Same as a series of write_byte() calls */
void (*write_block)(void *, const u8 *, int);
- /**
- * Combines two reads and a smart write for ROM searches
- * @return bit0=Id bit1=comp_id bit2=dir_taken
- */
u8 (*triplet)(void *, u8);
- /**
- * long write-0 with a read for the presence pulse detection
- * @return -1=Error, 0=Device present, 1=No device present
- */
u8 (*reset_bus)(void *);
- /**
- * Put out a strong pull-up pulse of the specified duration.
- * @return -1=Error, 0=completed
- */
u8 (*set_pullup)(void *, int);
- /** Really nice hardware can handles the different types of ROM search
- * w1_master* is passed to the slave found callback.
- */
void (*search)(void *, struct w1_master *,
u8, w1_slave_found_callback);
};
+/**
+ * enum w1_master_flags - bitfields used in w1_master.flags
+ * @W1_ABORT_SEARCH: abort searching early on shutdown
+ * @W1_WARN_MAX_COUNT: limit warning when the maximum count is reached
+ */
+enum w1_master_flags {
+ W1_ABORT_SEARCH = 0,
+ W1_WARN_MAX_COUNT = 1,
+};
+
+/**
+ * struct w1_master - one per bus master
+ * @w1_master_entry: master linked list
+ * @owner: module owner
+ * @name: dynamically allocate bus name
+ * @list_mutex: protect slist and async_list
+ * @slist: linked list of slaves
+ * @async_list: linked list of netlink commands to execute
+ * @max_slave_count: maximum number of slaves to search for at a time
+ * @slave_count: current number of slaves known
+ * @attempts: number of searches ran
+ * @slave_ttl: number of searches before a slave is timed out
+ * @initialized: prevent init/removal race conditions
+ * @id: w1 bus number
+ * @search_count: number of automatic searches to run, -1 unlimited
+ * @search_id: allows continuing a search
+ * @refcnt: reference count
+ * @priv: private data storage
+ * @priv_size: size allocated
+ * @enable_pullup: allows a strong pullup
+ * @pullup_duration: time for the next strong pullup
+ * @flags: one of w1_master_flags
+ * @thread: thread for bus search and netlink commands
+ * @mutex: protect most of w1_master
+ * @bus_mutex: pretect concurrent bus access
+ * @driver: sysfs driver
+ * @dev: sysfs device
+ * @bus_master: io operations available
+ * @seq: sequence number used for netlink broadcasts
+ * @portid: destination for the current netlink command
+ */
struct w1_master
{
struct list_head w1_master_entry;
struct module *owner;
unsigned char name[W1_MAXNAMELEN];
+ /* list_mutex protects just slist and async_list so slaves can be
+ * searched for and async commands added while the master has
+ * w1_master.mutex locked and is operating on the bus.
+ * lock order w1_mlock, w1_master.mutex, w1_master.list_mutex
+ */
+ struct mutex list_mutex;
struct list_head slist;
+ struct list_head async_list;
int max_slave_count, slave_count;
unsigned long attempts;
int slave_ttl;
int initialized;
u32 id;
int search_count;
+ /* id to start searching on, to continue a search or 0 to restart */
+ u64 search_id;
atomic_t refcnt;
@@ -178,6 +248,8 @@ struct w1_master
/** 5V strong pullup duration in milliseconds, zero disabled. */
int pullup_duration;
+ long flags;
+
struct task_struct *thread;
struct mutex mutex;
struct mutex bus_mutex;
@@ -188,16 +260,41 @@ struct w1_master
struct w1_bus_master *bus_master;
u32 seq;
+ /* port id to send netlink responses to. The value is temporarily
+ * stored here while processing a message, set after locking the
+ * mutex, zero before unlocking the mutex.
+ */
+ u32 portid;
+};
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback. Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+ struct list_head async_entry;
+ void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
};
int w1_create_master_attributes(struct w1_master *);
void w1_destroy_master_attributes(struct w1_master *master);
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/* decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented */
+int w1_unref_slave(struct w1_slave *sl);
void w1_slave_found(struct w1_master *dev, u64 rn);
void w1_search_process_cb(struct w1_master *dev, u8 search_type,
w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+ struct w1_reg_num *rn);
struct w1_master *w1_search_master_id(u32 id);
/* Disconnect and reconnect devices in the given family. Used for finding
@@ -206,7 +303,9 @@ struct w1_master *w1_search_master_id(u32 id);
* has just been registered, to 0 when it has been unregistered.
*/
void w1_reconnect_slaves(struct w1_family *f, int attach);
-void w1_slave_detach(struct w1_slave *sl);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
u8 w1_triplet(struct w1_master *dev, int bdir);
void w1_write_8(struct w1_master *, u8);
@@ -242,6 +341,7 @@ extern int w1_max_slave_ttl;
extern struct list_head w1_masters;
extern struct mutex w1_mlock;
+extern int w1_process_callbacks(struct w1_master *dev);
extern int w1_process(void *);
#endif /* __KERNEL__ */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index e9309778ee72..3bff6b37b472 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -31,6 +31,10 @@
DEFINE_SPINLOCK(w1_flock);
static LIST_HEAD(w1_families);
+/**
+ * w1_register_family() - register a device family driver
+ * @newf: family to register
+ */
int w1_register_family(struct w1_family *newf)
{
struct list_head *ent, *n;
@@ -59,6 +63,10 @@ int w1_register_family(struct w1_family *newf)
return ret;
}
+/**
+ * w1_unregister_family() - unregister a device family driver
+ * @fent: family to unregister
+ */
void w1_unregister_family(struct w1_family *fent)
{
struct list_head *ent, *n;
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 4ad0e81b6404..26ca1343055b 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -48,6 +48,12 @@
struct w1_slave;
+/**
+ * struct w1_family_ops - operations for a family type
+ * @add_slave: add_slave
+ * @remove_slave: remove_slave
+ * @groups: sysfs group
+ */
struct w1_family_ops
{
int (* add_slave)(struct w1_slave *);
@@ -55,6 +61,13 @@ struct w1_family_ops
const struct attribute_group **groups;
};
+/**
+ * struct w1_family - reference counted family structure.
+ * @family_entry: family linked list
+ * @fid: 8 bit family identifier
+ * @fops: operations for this family
+ * @refcnt: reference counter
+ */
struct w1_family
{
struct list_head family_entry;
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 590bd8a7cd1b..9b084db739c7 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -75,8 +75,10 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
atomic_set(&dev->refcnt, 2);
INIT_LIST_HEAD(&dev->slist);
+ INIT_LIST_HEAD(&dev->async_list);
mutex_init(&dev->mutex);
mutex_init(&dev->bus_mutex);
+ mutex_init(&dev->list_mutex);
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
@@ -103,6 +105,10 @@ static void w1_free_dev(struct w1_master *dev)
device_unregister(&dev->dev);
}
+/**
+ * w1_add_master_device() - registers a new master device
+ * @master: master bus device to register
+ */
int w1_add_master_device(struct w1_bus_master *master)
{
struct w1_master *dev, *entry;
@@ -172,6 +178,7 @@ int w1_add_master_device(struct w1_bus_master *master)
#if 0 /* Thread cleanup code, not required currently. */
err_out_kill_thread:
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
kthread_stop(dev->thread);
#endif
err_out_rm_attr:
@@ -187,16 +194,22 @@ void __w1_remove_master_device(struct w1_master *dev)
struct w1_netlink_msg msg;
struct w1_slave *sl, *sln;
- kthread_stop(dev->thread);
-
mutex_lock(&w1_mlock);
list_del(&dev->w1_master_entry);
mutex_unlock(&w1_mlock);
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
+ kthread_stop(dev->thread);
+
mutex_lock(&dev->mutex);
- list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry)
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
w1_destroy_master_attributes(dev);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
atomic_dec(&dev->refcnt);
@@ -206,7 +219,9 @@ void __w1_remove_master_device(struct w1_master *dev)
if (msleep_interruptible(1000))
flush_signals(current);
+ w1_process_callbacks(dev);
}
+ w1_process_callbacks(dev);
memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
@@ -216,6 +231,10 @@ void __w1_remove_master_device(struct w1_master *dev)
w1_free_dev(dev);
}
+/**
+ * w1_remove_master_device() - unregister a master device
+ * @bm: master bus device to remove
+ */
void w1_remove_master_device(struct w1_bus_master *bm)
{
struct w1_master *dev, *found = NULL;
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index e10acc237733..282092421cc9 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -62,7 +62,9 @@ static void w1_write_bit(struct w1_master *dev, int bit);
static u8 w1_read_bit(struct w1_master *dev);
/**
- * Generates a write-0 or write-1 cycle and samples the level.
+ * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level.
+ * @dev: the master device
+ * @bit: 0 - write a 0, 1 - write a 0 read the level
*/
static u8 w1_touch_bit(struct w1_master *dev, int bit)
{
@@ -77,7 +79,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
}
/**
- * Generates a write-0 or write-1 cycle.
+ * w1_write_bit() - Generates a write-0 or write-1 cycle.
+ * @dev: the master device
+ * @bit: bit to write
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static void w1_write_bit(struct w1_master *dev, int bit)
@@ -102,11 +107,12 @@ static void w1_write_bit(struct w1_master *dev, int bit)
}
/**
+ * w1_pre_write() - pre-write operations
+ * @dev: the master device
+ *
* Pre-write operation, currently only supporting strong pullups.
* Program the hardware for a strong pullup, if one has been requested and
* the hardware supports it.
- *
- * @param dev the master device
*/
static void w1_pre_write(struct w1_master *dev)
{
@@ -118,11 +124,12 @@ static void w1_pre_write(struct w1_master *dev)
}
/**
+ * w1_post_write() - post-write options
+ * @dev: the master device
+ *
* Post-write operation, currently only supporting strong pullups.
* If a strong pullup was requested, clear it if the hardware supports
* them, or execute the delay otherwise, in either case clear the request.
- *
- * @param dev the master device
*/
static void w1_post_write(struct w1_master *dev)
{
@@ -136,10 +143,9 @@ static void w1_post_write(struct w1_master *dev)
}
/**
- * Writes 8 bits.
- *
- * @param dev the master device
- * @param byte the byte to write
+ * w1_write_8() - Writes 8 bits.
+ * @dev: the master device
+ * @byte: the byte to write
*/
void w1_write_8(struct w1_master *dev, u8 byte)
{
@@ -161,7 +167,9 @@ EXPORT_SYMBOL_GPL(w1_write_8);
/**
- * Generates a write-1 cycle and samples the level.
+ * w1_read_bit() - Generates a write-1 cycle and samples the level.
+ * @dev: the master device
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static u8 w1_read_bit(struct w1_master *dev)
@@ -185,16 +193,17 @@ static u8 w1_read_bit(struct w1_master *dev)
}
/**
- * Does a triplet - used for searching ROM addresses.
+ * w1_triplet() - * Does a triplet - used for searching ROM addresses.
+ * @dev: the master device
+ * @bdir: the bit to write if both id_bit and comp_bit are 0
+ *
* Return bits:
* bit 0 = id_bit
* bit 1 = comp_bit
* bit 2 = dir_taken
* If both bits 0 & 1 are set, the search should be restarted.
*
- * @param dev the master device
- * @param bdir the bit to write if both id_bit and comp_bit are 0
- * @return bit fields - see above
+ * Return: bit fields - see above
*/
u8 w1_triplet(struct w1_master *dev, int bdir)
{
@@ -226,10 +235,10 @@ u8 w1_triplet(struct w1_master *dev, int bdir)
}
/**
- * Reads 8 bits.
+ * w1_read_8() - Reads 8 bits.
+ * @dev: the master device
*
- * @param dev the master device
- * @return the byte read
+ * Return: the byte read
*/
u8 w1_read_8(struct w1_master *dev)
{
@@ -247,11 +256,10 @@ u8 w1_read_8(struct w1_master *dev)
EXPORT_SYMBOL_GPL(w1_read_8);
/**
- * Writes a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_write_block() - Writes a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
{
@@ -269,11 +277,10 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_write_block);
/**
- * Touches a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_touch_block() - Touches a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -294,12 +301,11 @@ void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_touch_block);
/**
- * Reads a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the buffer to fill
- * @param len the number of bytes to read
- * @return the number of bytes read
+ * w1_read_block() - Reads a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the buffer to fill
+ * @len: the number of bytes to read
+ * Return: the number of bytes read
*/
u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -319,10 +325,9 @@ u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
EXPORT_SYMBOL_GPL(w1_read_block);
/**
- * Issues a reset bus sequence.
- *
- * @param dev The bus master pointer
- * @return 0=Device present, 1=No device present or error
+ * w1_reset_bus() - Issues a reset bus sequence.
+ * @dev: the master device
+ * Return: 0=Device present, 1=No device present or error
*/
int w1_reset_bus(struct w1_master *dev)
{
@@ -383,12 +388,15 @@ void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_cal
}
/**
+ * w1_reset_select_slave() - reset and select a slave
+ * @sl: the slave to select
+ *
* Resets the bus and then selects the slave by sending either a skip rom
- * or a rom match.
+ * or a rom match. A skip rom is issued if there is only one device
+ * registered on the bus.
* The w1 master lock must be held.
*
- * @param sl the slave to select
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
int w1_reset_select_slave(struct w1_slave *sl)
{
@@ -409,6 +417,9 @@ int w1_reset_select_slave(struct w1_slave *sl)
EXPORT_SYMBOL_GPL(w1_reset_select_slave);
/**
+ * w1_reset_resume_command() - resume instead of another match ROM
+ * @dev: the master device
+ *
* When the workflow with a slave amongst many requires several
* successive commands a reset between each, this function is similar
* to doing a reset then a match ROM for the last matched ROM. The
@@ -420,8 +431,6 @@ EXPORT_SYMBOL_GPL(w1_reset_select_slave);
* doesn't work of course, but the resume command is the next best thing.
*
* The w1 master lock must be held.
- *
- * @param dev the master device
*/
int w1_reset_resume_command(struct w1_master *dev)
{
@@ -435,6 +444,10 @@ int w1_reset_resume_command(struct w1_master *dev)
EXPORT_SYMBOL_GPL(w1_reset_resume_command);
/**
+ * w1_next_pullup() - register for a strong pullup
+ * @dev: the master device
+ * @delay: time in milliseconds
+ *
* Put out a strong pull-up of the specified duration after the next write
* operation. Not all hardware supports strong pullups. Hardware that
* doesn't support strong pullups will sleep for the given time after the
@@ -442,8 +455,7 @@ EXPORT_SYMBOL_GPL(w1_reset_resume_command);
* the next write, specifying zero will clear a previous request.
* The w1 master lock must be held.
*
- * @param delay time in milliseconds
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
void w1_next_pullup(struct w1_master *dev, int delay)
{
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 40788c925d1c..5234964fe001 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -45,7 +45,7 @@ void w1_netlink_send(struct w1_master *dev, struct w1_netlink_msg *msg)
memcpy(w, msg, sizeof(struct w1_netlink_msg));
- cn_netlink_send(m, 0, GFP_KERNEL);
+ cn_netlink_send(m, dev->portid, 0, GFP_KERNEL);
}
static void w1_send_slave(struct w1_master *dev, u64 rn)
@@ -54,53 +54,95 @@ static void w1_send_slave(struct w1_master *dev, u64 rn)
struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
int avail;
-
- /* update kernel slave list */
- w1_slave_found(dev, rn);
+ u64 *data;
avail = dev->priv_size - cmd->len;
- if (avail > 8) {
- u64 *data = (void *)(cmd + 1) + cmd->len;
+ if (avail < 8) {
+ msg->ack++;
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
- *data = rn;
- cmd->len += 8;
- hdr->len += 8;
- msg->len += 8;
- return;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+ hdr->len = sizeof(struct w1_netlink_cmd);
+ cmd->len = 0;
}
- msg->ack++;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ data = (void *)(cmd + 1) + cmd->len;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
- hdr->len = sizeof(struct w1_netlink_cmd);
- cmd->len = 0;
+ *data = rn;
+ cmd->len += 8;
+ hdr->len += 8;
+ msg->len += 8;
}
-static int w1_process_search_command(struct w1_master *dev, struct cn_msg *msg,
- unsigned int avail)
+static void w1_found_send_slave(struct w1_master *dev, u64 rn)
{
- struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
- int search_type = (cmd->cmd == W1_CMD_ALARM_SEARCH)?W1_ALARM_SEARCH:W1_SEARCH;
+ /* update kernel slave list */
+ w1_slave_found(dev, rn);
- dev->priv = msg;
- dev->priv_size = avail;
+ w1_send_slave(dev, rn);
+}
+
+/* Get the current slave list, or search (with or without alarm) */
+static int w1_get_slaves(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
+{
+ struct cn_msg *msg;
+ struct w1_netlink_msg *hdr;
+ struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+
+ msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->id = req_msg->id;
+ msg->seq = req_msg->seq;
+ msg->ack = 0;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+
+ hdr = (struct w1_netlink_msg *)(msg + 1);
+ cmd = (struct w1_netlink_cmd *)(hdr + 1);
+
+ hdr->type = W1_MASTER_CMD;
+ hdr->id = req_hdr->id;
+ hdr->len = sizeof(struct w1_netlink_cmd);
+
+ cmd->cmd = req_cmd->cmd;
+ cmd->len = 0;
- w1_search_process_cb(dev, search_type, w1_send_slave);
+ dev->priv = msg;
+ dev->priv_size = PAGE_SIZE - msg->len - sizeof(struct cn_msg);
+
+ if (req_cmd->cmd == W1_CMD_LIST_SLAVES) {
+ __u64 rn;
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
+ memcpy(&rn, &sl->reg_num, sizeof(rn));
+ w1_send_slave(dev, rn);
+ }
+ mutex_unlock(&dev->list_mutex);
+ } else {
+ w1_search_process_cb(dev, cmd->cmd == W1_CMD_ALARM_SEARCH ?
+ W1_ALARM_SEARCH : W1_SEARCH, w1_found_send_slave);
+ }
msg->ack = 0;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
dev->priv = NULL;
dev->priv_size = 0;
+ kfree(msg);
+
return 0;
}
static int w1_send_read_reply(struct cn_msg *msg, struct w1_netlink_msg *hdr,
- struct w1_netlink_cmd *cmd)
+ struct w1_netlink_cmd *cmd, u32 portid)
{
void *data;
struct w1_netlink_msg *h;
@@ -131,7 +173,7 @@ static int w1_send_read_reply(struct cn_msg *msg, struct w1_netlink_msg *hdr,
memcpy(c->data, cmd->data, c->len);
- err = cn_netlink_send(cm, 0, GFP_KERNEL);
+ err = cn_netlink_send(cm, portid, 0, GFP_KERNEL);
kfree(data);
@@ -146,11 +188,11 @@ static int w1_process_command_io(struct w1_master *dev, struct cn_msg *msg,
switch (cmd->cmd) {
case W1_CMD_TOUCH:
w1_touch_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_READ:
w1_read_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_WRITE:
w1_write_block(dev, cmd->data, cmd->len);
@@ -163,38 +205,57 @@ static int w1_process_command_io(struct w1_master *dev, struct cn_msg *msg,
return err;
}
-static int w1_process_command_master(struct w1_master *dev, struct cn_msg *req_msg,
- struct w1_netlink_msg *req_hdr, struct w1_netlink_cmd *req_cmd)
+static int w1_process_command_addremove(struct w1_master *dev,
+ struct cn_msg *msg, struct w1_netlink_msg *hdr,
+ struct w1_netlink_cmd *cmd)
{
- int err = -EINVAL;
- struct cn_msg *msg;
- struct w1_netlink_msg *hdr;
- struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+ int err = 0;
+ struct w1_reg_num *id;
- msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!msg)
- return -ENOMEM;
+ if (cmd->len != 8)
+ return -EINVAL;
- msg->id = req_msg->id;
- msg->seq = req_msg->seq;
- msg->ack = 0;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
+ id = (struct w1_reg_num *)cmd->data;
- hdr = (struct w1_netlink_msg *)(msg + 1);
- cmd = (struct w1_netlink_cmd *)(hdr + 1);
+ sl = w1_slave_search_device(dev, id);
+ switch (cmd->cmd) {
+ case W1_CMD_SLAVE_ADD:
+ if (sl)
+ err = -EINVAL;
+ else
+ err = w1_attach_slave_device(dev, id);
+ break;
+ case W1_CMD_SLAVE_REMOVE:
+ if (sl)
+ w1_slave_detach(sl);
+ else
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
- hdr->type = W1_MASTER_CMD;
- hdr->id = req_hdr->id;
- hdr->len = sizeof(struct w1_netlink_cmd);
+ return err;
+}
- cmd->cmd = req_cmd->cmd;
- cmd->len = 0;
+static int w1_process_command_master(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
+{
+ int err = -EINVAL;
- switch (cmd->cmd) {
+ /* drop bus_mutex for search (does it's own locking), and add/remove
+ * which doesn't use the bus
+ */
+ switch (req_cmd->cmd) {
case W1_CMD_SEARCH:
case W1_CMD_ALARM_SEARCH:
- err = w1_process_search_command(dev, msg,
- PAGE_SIZE - msg->len - sizeof(struct cn_msg));
+ case W1_CMD_LIST_SLAVES:
+ mutex_unlock(&dev->bus_mutex);
+ err = w1_get_slaves(dev, req_msg, req_hdr, req_cmd);
+ mutex_lock(&dev->bus_mutex);
break;
case W1_CMD_READ:
case W1_CMD_WRITE:
@@ -204,12 +265,20 @@ static int w1_process_command_master(struct w1_master *dev, struct cn_msg *req_m
case W1_CMD_RESET:
err = w1_reset_bus(dev);
break;
+ case W1_CMD_SLAVE_ADD:
+ case W1_CMD_SLAVE_REMOVE:
+ mutex_unlock(&dev->bus_mutex);
+ mutex_lock(&dev->mutex);
+ err = w1_process_command_addremove(dev, req_msg, req_hdr,
+ req_cmd);
+ mutex_unlock(&dev->mutex);
+ mutex_lock(&dev->bus_mutex);
+ break;
default:
err = -EINVAL;
break;
}
- kfree(msg);
return err;
}
@@ -223,7 +292,8 @@ static int w1_process_command_slave(struct w1_slave *sl, struct cn_msg *msg,
return w1_process_command_io(sl->master, msg, hdr, cmd);
}
-static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mcmd)
+static int w1_process_command_root(struct cn_msg *msg,
+ struct w1_netlink_msg *mcmd, u32 portid)
{
struct w1_master *m;
struct cn_msg *cn;
@@ -256,7 +326,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
mutex_lock(&w1_mlock);
list_for_each_entry(m, &w1_masters, w1_master_entry) {
if (cn->len + sizeof(*id) > PAGE_SIZE - sizeof(struct cn_msg)) {
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
cn->ack++;
cn->len = sizeof(struct w1_netlink_msg);
w->len = 0;
@@ -269,7 +339,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
id++;
}
cn->ack = 0;
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
mutex_unlock(&w1_mlock);
kfree(cn);
@@ -277,7 +347,7 @@ static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mc
}
static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rmsg,
- struct w1_netlink_cmd *rcmd, int error)
+ struct w1_netlink_cmd *rcmd, int portid, int error)
{
struct cn_msg *cmsg;
struct w1_netlink_msg *msg;
@@ -304,35 +374,147 @@ static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rm
cmsg->len += sizeof(*cmd);
}
- error = cn_netlink_send(cmsg, 0, GFP_KERNEL);
+ error = cn_netlink_send(cmsg, portid, 0, GFP_KERNEL);
kfree(cmsg);
return error;
}
+/* Bundle together a reference count, the full message, and broken out
+ * commands to be executed on each w1 master kthread in one memory allocation.
+ */
+struct w1_cb_block {
+ atomic_t refcnt;
+ u32 portid; /* Sending process port ID */
+ struct cn_msg msg;
+ /* cn_msg data */
+ /* one or more variable length struct w1_cb_node */
+};
+struct w1_cb_node {
+ struct w1_async_cmd async;
+ /* pointers within w1_cb_block and msg data */
+ struct w1_cb_block *block;
+ struct w1_netlink_msg *m;
+ struct w1_slave *sl;
+ struct w1_master *dev;
+};
+
+static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
+{
+ struct w1_cb_node *node = container_of(async_cmd, struct w1_cb_node,
+ async);
+ u16 mlen = node->m->len;
+ u8 *cmd_data = node->m->data;
+ int err = 0;
+ struct w1_slave *sl = node->sl;
+ struct w1_netlink_cmd *cmd = NULL;
+
+ mutex_lock(&dev->bus_mutex);
+ dev->portid = node->block->portid;
+ if (sl && w1_reset_select_slave(sl))
+ err = -ENODEV;
+
+ while (mlen && !err) {
+ cmd = (struct w1_netlink_cmd *)cmd_data;
+
+ if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (sl)
+ err = w1_process_command_slave(sl, &node->block->msg,
+ node->m, cmd);
+ else
+ err = w1_process_command_master(dev, &node->block->msg,
+ node->m, cmd);
+
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+ err = 0;
+
+ cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
+ mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
+ }
+
+ if (!cmd || err)
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+
+ if (sl)
+ w1_unref_slave(sl);
+ else
+ atomic_dec(&dev->refcnt);
+ dev->portid = 0;
+ mutex_unlock(&dev->bus_mutex);
+
+ mutex_lock(&dev->list_mutex);
+ list_del(&async_cmd->async_entry);
+ mutex_unlock(&dev->list_mutex);
+
+ if (atomic_sub_return(1, &node->block->refcnt) == 0)
+ kfree(node->block);
+}
+
static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd;
struct w1_slave *sl;
struct w1_master *dev;
+ u16 msg_len;
int err = 0;
+ struct w1_cb_block *block = NULL;
+ struct w1_cb_node *node = NULL;
+ int node_count = 0;
+
+ /* Count the number of master or slave commands there are to allocate
+ * space for one cb_node each.
+ */
+ msg_len = msg->len;
+ while (msg_len && !err) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (m->type == W1_MASTER_CMD || m->type == W1_SLAVE_CMD)
+ ++node_count;
- while (msg->len && !err) {
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
+ m = (struct w1_netlink_msg *)(((u8 *)m) +
+ sizeof(struct w1_netlink_msg) + m->len);
+ }
+ m = (struct w1_netlink_msg *)(msg + 1);
+ if (node_count) {
+ /* msg->len doesn't include itself */
+ long size = sizeof(struct w1_cb_block) + msg->len +
+ node_count*sizeof(struct w1_cb_node);
+ block = kmalloc(size, GFP_KERNEL);
+ if (!block) {
+ w1_netlink_send_error(msg, m, NULL, nsp->portid,
+ -ENOMEM);
+ return;
+ }
+ atomic_set(&block->refcnt, 1);
+ block->portid = nsp->portid;
+ memcpy(&block->msg, msg, sizeof(*msg) + msg->len);
+ node = (struct w1_cb_node *)((u8 *)block->msg.data + msg->len);
+ }
+
+ msg_len = msg->len;
+ while (msg_len && !err) {
struct w1_reg_num id;
u16 mlen = m->len;
- u8 *cmd_data = m->data;
dev = NULL;
sl = NULL;
- cmd = NULL;
memcpy(&id, m->id.id, sizeof(id));
#if 0
printk("%s: %02x.%012llx.%02x: type=%02x, len=%u.\n",
__func__, id.family, (unsigned long long)id.id, id.crc, m->type, m->len);
#endif
- if (m->len + sizeof(struct w1_netlink_msg) > msg->len) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
err = -E2BIG;
break;
}
@@ -344,7 +526,7 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
if (sl)
dev = sl->master;
} else {
- err = w1_process_command_root(msg, m);
+ err = w1_process_command_root(msg, m, nsp->portid);
goto out_cont;
}
@@ -357,41 +539,24 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
if (!mlen)
goto out_cont;
- mutex_lock(&dev->mutex);
-
- if (sl && w1_reset_select_slave(sl)) {
- err = -ENODEV;
- goto out_up;
- }
+ atomic_inc(&block->refcnt);
+ node->async.cb = w1_process_cb;
+ node->block = block;
+ node->m = (struct w1_netlink_msg *)((u8 *)&block->msg +
+ (size_t)((u8 *)m - (u8 *)msg));
+ node->sl = sl;
+ node->dev = dev;
- while (mlen) {
- cmd = (struct w1_netlink_cmd *)cmd_data;
+ mutex_lock(&dev->list_mutex);
+ list_add_tail(&node->async.async_entry, &dev->async_list);
+ wake_up_process(dev->thread);
+ mutex_unlock(&dev->list_mutex);
+ ++node;
- if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
- err = -E2BIG;
- break;
- }
-
- if (sl)
- err = w1_process_command_slave(sl, msg, m, cmd);
- else
- err = w1_process_command_master(dev, msg, m, cmd);
-
- w1_netlink_send_error(msg, m, cmd, err);
- err = 0;
-
- cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
- mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
- }
-out_up:
- atomic_dec(&dev->refcnt);
- if (sl)
- atomic_dec(&sl->refcnt);
- mutex_unlock(&dev->mutex);
out_cont:
- if (!cmd || err)
- w1_netlink_send_error(msg, m, cmd, err);
- msg->len -= sizeof(struct w1_netlink_msg) + m->len;
+ if (err)
+ w1_netlink_send_error(msg, m, NULL, nsp->portid, err);
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
m = (struct w1_netlink_msg *)(((u8 *)m) + sizeof(struct w1_netlink_msg) + m->len);
/*
@@ -400,6 +565,8 @@ out_cont:
if (err == -ENODEV)
err = 0;
}
+ if (block && atomic_sub_return(1, &block->refcnt) == 0)
+ kfree(block);
}
int w1_init_netlink(void)
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index b0922dc29658..1e9504e67650 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -27,6 +27,18 @@
#include "w1.h"
+/**
+ * enum w1_netlink_message_types - message type
+ *
+ * @W1_SLAVE_ADD: notification that a slave device was added
+ * @W1_SLAVE_REMOVE: notification that a slave device was removed
+ * @W1_MASTER_ADD: notification that a new bus master was added
+ * @W1_MASTER_REMOVE: notification that a bus masterwas removed
+ * @W1_MASTER_CMD: initiate operations on a specific master
+ * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch
+ * operation
+ * @W1_LIST_MASTERS: used to determine the bus master identifiers
+ */
enum w1_netlink_message_types {
W1_SLAVE_ADD = 0,
W1_SLAVE_REMOVE,
@@ -52,6 +64,22 @@ struct w1_netlink_msg
__u8 data[0];
};
+/**
+ * enum w1_commands - commands available for master or slave operations
+ * @W1_CMD_READ: read len bytes
+ * @W1_CMD_WRITE: write len bytes
+ * @W1_CMD_SEARCH: initiate a standard search, returns only the slave
+ * devices found during that search
+ * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming
+ * @W1_CMD_TOUCH: Touches a series of bytes.
+ * @W1_CMD_RESET: sends a bus reset on the given master
+ * @W1_CMD_SLAVE_ADD: adds a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_LIST_SLAVES: list of slaves registered on this master
+ * @W1_CMD_MAX: number of available commands
+ */
enum w1_commands {
W1_CMD_READ = 0,
W1_CMD_WRITE,
@@ -59,7 +87,10 @@ enum w1_commands {
W1_CMD_ALARM_SEARCH,
W1_CMD_TOUCH,
W1_CMD_RESET,
- W1_CMD_MAX,
+ W1_CMD_SLAVE_ADD,
+ W1_CMD_SLAVE_REMOVE,
+ W1_CMD_LIST_SLAVES,
+ W1_CMD_MAX
};
struct w1_netlink_cmd
diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
new file mode 100644
index 000000000000..d11e1e543871
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,18 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_SPMI_H
+#define __DT_BINDINGS_SPMI_H
+
+#define SPMI_USID 0
+#define SPMI_GSID 1
+
+#endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index b2b5a41b6a24..be9c4747d511 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -71,7 +71,7 @@ struct cn_dev {
int cn_add_callback(struct cb_id *id, const char *name,
void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
void cn_del_callback(struct cb_id *);
-int cn_netlink_send(struct cn_msg *, u32, gfp_t);
+int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 group, gfp_t gfp_mask);
int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
struct cb_id *id,
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 21c59af1150b..f488145bb2d4 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -240,6 +240,12 @@ extern int extcon_register_notifier(struct extcon_dev *edev,
struct notifier_block *nb);
extern int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb);
+
+/*
+ * Following API get the extcon device from devicetree.
+ * This function use phandle of devicetree to get extcon device directly.
+ */
+extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index);
#else /* CONFIG_EXTCON */
static inline int extcon_dev_register(struct extcon_dev *edev)
{
@@ -324,5 +330,11 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
{
return 0;
}
+
+static inline struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
+ int index)
+{
+ return ERR_PTR(-ENODEV);
+}
#endif /* CONFIG_EXTCON */
#endif /* __LINUX_EXTCON_H__ */
diff --git a/include/linux/extcon/of_extcon.h b/include/linux/extcon/of_extcon.h
deleted file mode 100644
index 0ebfeff1b55d..000000000000
--- a/include/linux/extcon/of_extcon.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * OF helpers for External connector (extcon) framework
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * Kishon Vijay Abraham I <kishon@ti.com>
- *
- * Copyright (C) 2013 Samsung Electronics
- * Chanwoo Choi <cw00.choi@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LINUX_OF_EXTCON_H
-#define __LINUX_OF_EXTCON_H
-
-#include <linux/err.h>
-
-#if IS_ENABLED(CONFIG_OF_EXTCON)
-extern struct extcon_dev
- *of_extcon_get_extcon_dev(struct device *dev, int index);
-#else
-static inline struct extcon_dev
- *of_extcon_get_extcon_dev(struct device *dev, int index)
-{
- return ERR_PTR(-ENOSYS);
-}
-#endif /* CONFIG_OF_EXTCON */
-#endif /* __LINUX_OF_EXTCON_H */
diff --git a/include/linux/fmc-sdb.h b/include/linux/fmc-sdb.h
index 1974317a9b3d..599bd6bab56d 100644
--- a/include/linux/fmc-sdb.h
+++ b/include/linux/fmc-sdb.h
@@ -14,6 +14,8 @@ union sdb_record {
struct sdb_bridge bridge;
struct sdb_integration integr;
struct sdb_empty empty;
+ struct sdb_synthesis synthesis;
+ struct sdb_repo_url repo_url;
};
struct fmc_device;
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/include/linux/fsl_ifc.h
index f49ddb1b2273..f49ddb1b2273 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 344883dce584..ab7359fde987 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -25,328 +25,11 @@
#ifndef _HYPERV_H
#define _HYPERV_H
-#include <linux/types.h>
-
-/*
- * Framework version for util services.
- */
-#define UTIL_FW_MINOR 0
-
-#define UTIL_WS2K8_FW_MAJOR 1
-#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR)
-
-#define UTIL_FW_MAJOR 3
-#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR)
-
-
-/*
- * Implementation of host controlled snapshot of the guest.
- */
-
-#define VSS_OP_REGISTER 128
-
-enum hv_vss_op {
- VSS_OP_CREATE = 0,
- VSS_OP_DELETE,
- VSS_OP_HOT_BACKUP,
- VSS_OP_GET_DM_INFO,
- VSS_OP_BU_COMPLETE,
- /*
- * Following operations are only supported with IC version >= 5.0
- */
- VSS_OP_FREEZE, /* Freeze the file systems in the VM */
- VSS_OP_THAW, /* Unfreeze the file systems */
- VSS_OP_AUTO_RECOVER,
- VSS_OP_COUNT /* Number of operations, must be last */
-};
-
-
-/*
- * Header for all VSS messages.
- */
-struct hv_vss_hdr {
- __u8 operation;
- __u8 reserved[7];
-} __attribute__((packed));
-
-
-/*
- * Flag values for the hv_vss_check_feature. Linux supports only
- * one value.
- */
-#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
-
-struct hv_vss_check_feature {
- __u32 flags;
-} __attribute__((packed));
-
-struct hv_vss_check_dm_info {
- __u32 flags;
-} __attribute__((packed));
-
-struct hv_vss_msg {
- union {
- struct hv_vss_hdr vss_hdr;
- int error;
- };
- union {
- struct hv_vss_check_feature vss_cf;
- struct hv_vss_check_dm_info dm_info;
- };
-} __attribute__((packed));
-
-/*
- * An implementation of HyperV key value pair (KVP) functionality for Linux.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- */
-
-/*
- * Maximum value size - used for both key names and value data, and includes
- * any applicable NULL terminators.
- *
- * Note: This limit is somewhat arbitrary, but falls easily within what is
- * supported for all native guests (back to Win 2000) and what is reasonable
- * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
- * limited to 255 character key names.
- *
- * MSDN recommends not storing data values larger than 2048 bytes in the
- * registry.
- *
- * Note: This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatibility.
- */
-
-/*
- * bytes, including any null terminators
- */
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
-
-
-/*
- * Maximum key size - the registry limit for the length of an entry name
- * is 256 characters, including the null terminator
- */
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
-
-/*
- * In Linux, we implement the KVP functionality in two components:
- * 1) The kernel component which is packaged as part of the hv_utils driver
- * is responsible for communicating with the host and responsible for
- * implementing the host/guest protocol. 2) A user level daemon that is
- * responsible for data gathering.
- *
- * Host/Guest Protocol: The host iterates over an index and expects the guest
- * to assign a key name to the index and also return the value corresponding to
- * the key. The host will have atmost one KVP transaction outstanding at any
- * given point in time. The host side iteration stops when the guest returns
- * an error. Microsoft has specified the following mapping of key names to
- * host specified index:
- *
- * Index Key Name
- * 0 FullyQualifiedDomainName
- * 1 IntegrationServicesVersion
- * 2 NetworkAddressIPv4
- * 3 NetworkAddressIPv6
- * 4 OSBuildNumber
- * 5 OSName
- * 6 OSMajorVersion
- * 7 OSMinorVersion
- * 8 OSVersion
- * 9 ProcessorArchitecture
- *
- * The Windows host expects the Key Name and Key Value to be encoded in utf16.
- *
- * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
- * data gathering functionality in a user mode daemon. The user level daemon
- * is also responsible for binding the key name to the index as well. The
- * kernel and user-level daemon communicate using a connector channel.
- *
- * The user mode component first registers with the
- * the kernel component. Subsequently, the kernel component requests, data
- * for the specified keys. In response to this message the user mode component
- * fills in the value corresponding to the specified key. We overload the
- * sequence field in the cn_msg header to define our KVP message types.
- *
- *
- * The kernel component simply acts as a conduit for communication between the
- * Windows host and the user-level daemon. The kernel component passes up the
- * index received from the Host to the user-level daemon. If the index is
- * valid (supported), the corresponding key as well as its
- * value (both are strings) is returned. If the index is invalid
- * (not supported), a NULL key string is returned.
- */
-
-
-/*
- * Registry value types.
- */
-
-#define REG_SZ 1
-#define REG_U32 4
-#define REG_U64 8
-
-/*
- * As we look at expanding the KVP functionality to include
- * IP injection functionality, we need to maintain binary
- * compatibility with older daemons.
- *
- * The KVP opcodes are defined by the host and it was unfortunate
- * that I chose to treat the registration operation as part of the
- * KVP operations defined by the host.
- * Here is the level of compatibility
- * (between the user level daemon and the kernel KVP driver) that we
- * will implement:
- *
- * An older daemon will always be supported on a newer driver.
- * A given user level daemon will require a minimal version of the
- * kernel driver.
- * If we cannot handle the version differences, we will fail gracefully
- * (this can happen when we have a user level daemon that is more
- * advanced than the KVP driver.
- *
- * We will use values used in this handshake for determining if we have
- * workable user level daemon and the kernel driver. We begin by taking the
- * registration opcode out of the KVP opcode namespace. We will however,
- * maintain compatibility with the existing user-level daemon code.
- */
-
-/*
- * Daemon code not supporting IP injection (legacy daemon).
- */
-
-#define KVP_OP_REGISTER 4
-
-/*
- * Daemon code supporting IP injection.
- * The KVP opcode field is used to communicate the
- * registration information; so define a namespace that
- * will be distinct from the host defined KVP opcode.
- */
-
-#define KVP_OP_REGISTER1 100
-
-enum hv_kvp_exchg_op {
- KVP_OP_GET = 0,
- KVP_OP_SET,
- KVP_OP_DELETE,
- KVP_OP_ENUMERATE,
- KVP_OP_GET_IP_INFO,
- KVP_OP_SET_IP_INFO,
- KVP_OP_COUNT /* Number of operations, must be last. */
-};
-
-enum hv_kvp_exchg_pool {
- KVP_POOL_EXTERNAL = 0,
- KVP_POOL_GUEST,
- KVP_POOL_AUTO,
- KVP_POOL_AUTO_EXTERNAL,
- KVP_POOL_AUTO_INTERNAL,
- KVP_POOL_COUNT /* Number of pools, must be last. */
-};
-
-/*
- * Some Hyper-V status codes.
- */
+#include <uapi/linux/hyperv.h>
-#define HV_S_OK 0x00000000
-#define HV_E_FAIL 0x80004005
-#define HV_S_CONT 0x80070103
-#define HV_ERROR_NOT_SUPPORTED 0x80070032
-#define HV_ERROR_MACHINE_LOCKED 0x800704F7
-#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
-#define HV_INVALIDARG 0x80070057
-#define HV_GUID_NOTFOUND 0x80041002
-
-#define ADDR_FAMILY_NONE 0x00
-#define ADDR_FAMILY_IPV4 0x01
-#define ADDR_FAMILY_IPV6 0x02
-
-#define MAX_ADAPTER_ID_SIZE 128
-#define MAX_IP_ADDR_SIZE 1024
-#define MAX_GATEWAY_SIZE 512
-
-
-struct hv_kvp_ipaddr_value {
- __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
- __u8 addr_family;
- __u8 dhcp_enabled;
- __u16 ip_addr[MAX_IP_ADDR_SIZE];
- __u16 sub_net[MAX_IP_ADDR_SIZE];
- __u16 gate_way[MAX_GATEWAY_SIZE];
- __u16 dns_addr[MAX_IP_ADDR_SIZE];
-} __attribute__((packed));
-
-
-struct hv_kvp_hdr {
- __u8 operation;
- __u8 pool;
- __u16 pad;
-} __attribute__((packed));
-
-struct hv_kvp_exchg_msg_value {
- __u32 value_type;
- __u32 key_size;
- __u32 value_size;
- __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
- union {
- __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
- __u32 value_u32;
- __u64 value_u64;
- };
-} __attribute__((packed));
-
-struct hv_kvp_msg_enumerate {
- __u32 index;
- struct hv_kvp_exchg_msg_value data;
-} __attribute__((packed));
-
-struct hv_kvp_msg_get {
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_set {
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_delete {
- __u32 key_size;
- __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_register {
- __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_msg {
- union {
- struct hv_kvp_hdr kvp_hdr;
- int error;
- };
- union {
- struct hv_kvp_msg_get kvp_get;
- struct hv_kvp_msg_set kvp_set;
- struct hv_kvp_msg_delete kvp_delete;
- struct hv_kvp_msg_enumerate kvp_enum_data;
- struct hv_kvp_ipaddr_value kvp_ip_val;
- struct hv_kvp_register kvp_register;
- } body;
-} __attribute__((packed));
-
-struct hv_kvp_ip_msg {
- __u8 operation;
- __u8 pool;
- struct hv_kvp_ipaddr_value kvp_ip_val;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
+#include <linux/types.h>
#include <linux/scatterlist.h>
#include <linux/list.h>
-#include <linux/uuid.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
@@ -354,7 +37,7 @@ struct hv_kvp_ip_msg {
#include <linux/mod_devicetable.h>
-#define MAX_PAGE_BUFFER_COUNT 19
+#define MAX_PAGE_BUFFER_COUNT 32
#define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */
#pragma pack(push, 1)
@@ -1043,6 +726,10 @@ struct vmbus_channel {
* This will be NULL for the primary channel.
*/
struct vmbus_channel *primary_channel;
+ /*
+ * Support per-channel state for use by vmbus drivers.
+ */
+ void *per_channel_state;
};
static inline void set_channel_read_state(struct vmbus_channel *c, bool state)
@@ -1050,6 +737,16 @@ static inline void set_channel_read_state(struct vmbus_channel *c, bool state)
c->batched_reading = state;
}
+static inline void set_per_channel_state(struct vmbus_channel *c, void *s)
+{
+ c->per_channel_state = s;
+}
+
+static inline void *get_per_channel_state(struct vmbus_channel *c)
+{
+ return c->per_channel_state;
+}
+
void vmbus_onmessage(void *context);
int vmbus_request_offers(void);
@@ -1118,7 +815,7 @@ extern int vmbus_open(struct vmbus_channel *channel,
extern void vmbus_close(struct vmbus_channel *channel);
extern int vmbus_sendpacket(struct vmbus_channel *channel,
- const void *buffer,
+ void *buffer,
u32 bufferLen,
u64 requestid,
enum vmbus_packet_type type,
@@ -1352,6 +1049,17 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver);
}
/*
+ * Guest File Copy Service
+ * {34D14BE3-DEE4-41c8-9AE7-6B174977C192}
+ */
+
+#define HV_FCOPY_GUID \
+ .guid = { \
+ 0xE3, 0x4B, 0xD1, 0x34, 0xE4, 0xDE, 0xC8, 0x41, \
+ 0x9A, 0xE7, 0x6B, 0x17, 0x49, 0x77, 0xC1, 0x92 \
+ }
+
+/*
* Common header for Hyper-V ICs
*/
@@ -1459,11 +1167,12 @@ int hv_vss_init(struct hv_util_service *);
void hv_vss_deinit(void);
void hv_vss_onchannelcallback(void *);
+extern struct resource hyperv_mmio;
+
/*
* Negotiated version with the Host.
*/
extern __u32 vmbus_proto_version;
-#endif /* __KERNEL__ */
#endif /* _HYPERV_H */
diff --git a/include/linux/mcb.h b/include/linux/mcb.h
new file mode 100644
index 000000000000..2db284d14064
--- /dev/null
+++ b/include/linux/mcb.h
@@ -0,0 +1,119 @@
+/*
+ * MEN Chameleon Bus.
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#ifndef _LINUX_MCB_H
+#define _LINUX_MCB_H
+
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/irqreturn.h>
+
+struct mcb_driver;
+
+/**
+ * struct mcb_bus - MEN Chameleon Bus
+ *
+ * @dev: pointer to carrier device
+ * @children: the child busses
+ * @bus_nr: mcb bus number
+ */
+struct mcb_bus {
+ struct list_head children;
+ struct device dev;
+ int bus_nr;
+};
+#define to_mcb_bus(b) container_of((b), struct mcb_bus, dev)
+
+/**
+ * struct mcb_device - MEN Chameleon Bus device
+ *
+ * @bus_list: internal list handling for bus code
+ * @dev: device in kernel representation
+ * @bus: mcb bus the device is plugged to
+ * @subordinate: subordinate MCBus in case of bridge
+ * @is_added: flag to check if device is added to bus
+ * @driver: associated mcb_driver
+ * @id: mcb device id
+ * @inst: instance in Chameleon table
+ * @group: group in Chameleon table
+ * @var: variant in Chameleon table
+ * @bar: BAR in Chameleon table
+ * @rev: revision in Chameleon table
+ * @irq: IRQ resource
+ * @memory: memory resource
+ */
+struct mcb_device {
+ struct list_head bus_list;
+ struct device dev;
+ struct mcb_bus *bus;
+ struct mcb_bus *subordinate;
+ bool is_added;
+ struct mcb_driver *driver;
+ u16 id;
+ int inst;
+ int group;
+ int var;
+ int bar;
+ int rev;
+ struct resource irq;
+ struct resource mem;
+};
+#define to_mcb_device(x) container_of((x), struct mcb_device, dev)
+
+/**
+ * struct mcb_driver - MEN Chameleon Bus device driver
+ *
+ * @driver: device_driver
+ * @id_table: mcb id table
+ * @probe: probe callback
+ * @remove: remove callback
+ * @shutdown: shutdown callback
+ */
+struct mcb_driver {
+ struct device_driver driver;
+ const struct mcb_device_id *id_table;
+ int (*probe)(struct mcb_device *mdev, const struct mcb_device_id *id);
+ void (*remove)(struct mcb_device *mdev);
+ void (*shutdown)(struct mcb_device *mdev);
+};
+#define to_mcb_driver(x) container_of((x), struct mcb_driver, driver)
+
+static inline void *mcb_get_drvdata(struct mcb_device *dev)
+{
+ return dev_get_drvdata(&dev->dev);
+}
+
+static inline void mcb_set_drvdata(struct mcb_device *dev, void *data)
+{
+ dev_set_drvdata(&dev->dev, data);
+}
+
+extern int __must_check __mcb_register_driver(struct mcb_driver *drv,
+ struct module *owner,
+ const char *mod_name);
+#define mcb_register_driver(driver) \
+ __mcb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+extern void mcb_unregister_driver(struct mcb_driver *driver);
+#define module_mcb_driver(__mcb_driver) \
+ module_driver(__mcb_driver, mcb_register_driver, mcb_unregister_driver);
+extern void mcb_bus_add_devices(const struct mcb_bus *bus);
+extern int mcb_device_register(struct mcb_bus *bus, struct mcb_device *dev);
+extern struct mcb_bus *mcb_alloc_bus(void);
+extern struct mcb_bus *mcb_bus_get(struct mcb_bus *bus);
+extern void mcb_bus_put(struct mcb_bus *bus);
+extern struct mcb_device *mcb_alloc_dev(struct mcb_bus *bus);
+extern void mcb_free_dev(struct mcb_device *dev);
+extern void mcb_release_bus(struct mcb_bus *bus);
+extern struct resource *mcb_request_mem(struct mcb_device *dev,
+ const char *name);
+extern void mcb_release_mem(struct resource *mem);
+extern int mcb_get_irq(struct mcb_device *dev);
+
+#endif /* _LINUX_MCB_H */
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index 3737f7218f51..2cf1547096d9 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -11,23 +11,23 @@
*/
#define PSMOUSE_MINOR 1
-#define MS_BUSMOUSE_MINOR 2
-#define ATIXL_BUSMOUSE_MINOR 3
+#define MS_BUSMOUSE_MINOR 2 /* unused */
+#define ATIXL_BUSMOUSE_MINOR 3 /* unused */
/*#define AMIGAMOUSE_MINOR 4 FIXME OBSOLETE */
-#define ATARIMOUSE_MINOR 5
-#define SUN_MOUSE_MINOR 6
-#define APOLLO_MOUSE_MINOR 7
-#define PC110PAD_MINOR 9
+#define ATARIMOUSE_MINOR 5 /* unused */
+#define SUN_MOUSE_MINOR 6 /* unused */
+#define APOLLO_MOUSE_MINOR 7 /* unused */
+#define PC110PAD_MINOR 9 /* unused */
/*#define ADB_MOUSE_MINOR 10 FIXME OBSOLETE */
#define WATCHDOG_MINOR 130 /* Watchdog timer */
#define TEMP_MINOR 131 /* Temperature Sensor */
#define RTC_MINOR 135
#define EFI_RTC_MINOR 136 /* EFI Time services */
#define SUN_OPENPROM_MINOR 139
-#define DMAPI_MINOR 140 /* DMAPI */
+#define DMAPI_MINOR 140 /* unused */
#define NVRAM_MINOR 144
#define SGI_MMTIMER 153
-#define STORE_QUEUE_MINOR 155
+#define STORE_QUEUE_MINOR 155 /* unused */
#define I2O_MINOR 166
#define MICROCODE_MINOR 184
#define VFIO_MINOR 196
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 45e921401b06..50f67eff27ef 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -432,6 +432,14 @@ struct spi_device_id {
kernel_ulong_t driver_data; /* Data private to the driver */
};
+#define SPMI_NAME_SIZE 32
+#define SPMI_MODULE_PREFIX "spmi:"
+
+struct spmi_device_id {
+ char name[SPMI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
/* dmi */
enum dmi_field {
DMI_NONE,
@@ -599,4 +607,9 @@ struct rio_device_id {
__u16 asm_did, asm_vid;
};
+struct mcb_device_id {
+ __u16 device;
+ kernel_ulong_t driver_data;
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 5ad86eacef0d..85691b9b4fa7 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -327,8 +327,10 @@ struct regmap *regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config);
struct regmap *regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *regmap_init_spmi(struct spmi_device *dev,
- const struct regmap_config *config);
+struct regmap *regmap_init_spmi_base(struct spmi_device *dev,
+ const struct regmap_config *config);
+struct regmap *regmap_init_spmi_ext(struct spmi_device *dev,
+ const struct regmap_config *config);
struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
@@ -341,8 +343,10 @@ struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config);
struct regmap *devm_regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *devm_regmap_init_spmi(struct spmi_device *dev,
- const struct regmap_config *config);
+struct regmap *devm_regmap_init_spmi_base(struct spmi_device *dev,
+ const struct regmap_config *config);
+struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
diff --git a/include/linux/spmi.h b/include/linux/spmi.h
new file mode 100644
index 000000000000..91f5eab9e428
--- /dev/null
+++ b/include/linux/spmi.h
@@ -0,0 +1,191 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef _LINUX_SPMI_H
+#define _LINUX_SPMI_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+/* Maximum slave identifier */
+#define SPMI_MAX_SLAVE_ID 16
+
+/* SPMI Commands */
+#define SPMI_CMD_EXT_WRITE 0x00
+#define SPMI_CMD_RESET 0x10
+#define SPMI_CMD_SLEEP 0x11
+#define SPMI_CMD_SHUTDOWN 0x12
+#define SPMI_CMD_WAKEUP 0x13
+#define SPMI_CMD_AUTHENTICATE 0x14
+#define SPMI_CMD_MSTR_READ 0x15
+#define SPMI_CMD_MSTR_WRITE 0x16
+#define SPMI_CMD_TRANSFER_BUS_OWNERSHIP 0x1A
+#define SPMI_CMD_DDB_MASTER_READ 0x1B
+#define SPMI_CMD_DDB_SLAVE_READ 0x1C
+#define SPMI_CMD_EXT_READ 0x20
+#define SPMI_CMD_EXT_WRITEL 0x30
+#define SPMI_CMD_EXT_READL 0x38
+#define SPMI_CMD_WRITE 0x40
+#define SPMI_CMD_READ 0x60
+#define SPMI_CMD_ZERO_WRITE 0x80
+
+/**
+ * struct spmi_device - Basic representation of an SPMI device
+ * @dev: Driver model representation of the device.
+ * @ctrl: SPMI controller managing the bus hosting this device.
+ * @usid: This devices' Unique Slave IDentifier.
+ */
+struct spmi_device {
+ struct device dev;
+ struct spmi_controller *ctrl;
+ u8 usid;
+};
+
+static inline struct spmi_device *to_spmi_device(struct device *d)
+{
+ return container_of(d, struct spmi_device, dev);
+}
+
+static inline void *spmi_device_get_drvdata(const struct spmi_device *sdev)
+{
+ return dev_get_drvdata(&sdev->dev);
+}
+
+static inline void spmi_device_set_drvdata(struct spmi_device *sdev, void *data)
+{
+ dev_set_drvdata(&sdev->dev, data);
+}
+
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl);
+
+static inline void spmi_device_put(struct spmi_device *sdev)
+{
+ if (sdev)
+ put_device(&sdev->dev);
+}
+
+int spmi_device_add(struct spmi_device *sdev);
+
+void spmi_device_remove(struct spmi_device *sdev);
+
+/**
+ * struct spmi_controller - interface to the SPMI master controller
+ * @dev: Driver model representation of the device.
+ * @nr: board-specific number identifier for this controller/bus
+ * @cmd: sends a non-data command sequence on the SPMI bus.
+ * @read_cmd: sends a register read command sequence on the SPMI bus.
+ * @write_cmd: sends a register write command sequence on the SPMI bus.
+ */
+struct spmi_controller {
+ struct device dev;
+ unsigned int nr;
+ int (*cmd)(struct spmi_controller *ctrl, u8 opcode, u8 sid);
+ int (*read_cmd)(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, u8 *buf, size_t len);
+ int (*write_cmd)(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, const u8 *buf, size_t len);
+};
+
+static inline struct spmi_controller *to_spmi_controller(struct device *d)
+{
+ return container_of(d, struct spmi_controller, dev);
+}
+
+static inline
+void *spmi_controller_get_drvdata(const struct spmi_controller *ctrl)
+{
+ return dev_get_drvdata(&ctrl->dev);
+}
+
+static inline void spmi_controller_set_drvdata(struct spmi_controller *ctrl,
+ void *data)
+{
+ dev_set_drvdata(&ctrl->dev, data);
+}
+
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+ size_t size);
+
+/**
+ * spmi_controller_put() - decrement controller refcount
+ * @ctrl SPMI controller.
+ */
+static inline void spmi_controller_put(struct spmi_controller *ctrl)
+{
+ if (ctrl)
+ put_device(&ctrl->dev);
+}
+
+int spmi_controller_add(struct spmi_controller *ctrl);
+void spmi_controller_remove(struct spmi_controller *ctrl);
+
+/**
+ * struct spmi_driver - SPMI slave device driver
+ * @driver: SPMI device drivers should initialize name and owner field of
+ * this structure.
+ * @probe: binds this driver to a SPMI device.
+ * @remove: unbinds this driver from the SPMI device.
+ * @shutdown: standard shutdown callback used during powerdown/halt.
+ * @suspend: standard suspend callback used during system suspend.
+ * @resume: standard resume callback used during system resume.
+ *
+ * If PM runtime support is desired for a slave, a device driver can call
+ * pm_runtime_put() from their probe() routine (and a balancing
+ * pm_runtime_get() in remove()). PM runtime support for a slave is
+ * implemented by issuing a SLEEP command to the slave on runtime_suspend(),
+ * transitioning the slave into the SLEEP state. On runtime_resume(), a WAKEUP
+ * command is sent to the slave to bring it back to ACTIVE.
+ */
+struct spmi_driver {
+ struct device_driver driver;
+ int (*probe)(struct spmi_device *sdev);
+ void (*remove)(struct spmi_device *sdev);
+};
+
+static inline struct spmi_driver *to_spmi_driver(struct device_driver *d)
+{
+ return container_of(d, struct spmi_driver, driver);
+}
+
+int spmi_driver_register(struct spmi_driver *sdrv);
+
+/**
+ * spmi_driver_unregister() - unregister an SPMI client driver
+ * @sdrv: the driver to unregister
+ */
+static inline void spmi_driver_unregister(struct spmi_driver *sdrv)
+{
+ if (sdrv)
+ driver_unregister(&sdrv->driver);
+}
+
+#define module_spmi_driver(__spmi_driver) \
+ module_driver(__spmi_driver, spmi_driver_register, \
+ spmi_driver_unregister)
+
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf);
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+ size_t len);
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+ size_t len);
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data);
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data);
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr,
+ const u8 *buf, size_t len);
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr,
+ const u8 *buf, size_t len);
+int spmi_command_reset(struct spmi_device *sdev);
+int spmi_command_sleep(struct spmi_device *sdev);
+int spmi_command_wakeup(struct spmi_device *sdev);
+int spmi_command_shutdown(struct spmi_device *sdev);
+
+#endif
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 3ce25b5d75a9..6929571b79b0 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -139,6 +139,7 @@ header-y += hid.h
header-y += hiddev.h
header-y += hidraw.h
header-y += hpet.h
+header-y += hyperv.h
header-y += hysdn_if.h
header-y += i2c-dev.h
header-y += i2c.h
diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h
new file mode 100644
index 000000000000..9beb7c991638
--- /dev/null
+++ b/include/uapi/linux/hyperv.h
@@ -0,0 +1,390 @@
+/*
+ *
+ * Copyright (c) 2011, Microsoft Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Authors:
+ * Haiyang Zhang <haiyangz@microsoft.com>
+ * Hank Janssen <hjanssen@microsoft.com>
+ * K. Y. Srinivasan <kys@microsoft.com>
+ *
+ */
+
+#ifndef _UAPI_HYPERV_H
+#define _UAPI_HYPERV_H
+
+#include <linux/uuid.h>
+
+/*
+ * Framework version for util services.
+ */
+#define UTIL_FW_MINOR 0
+
+#define UTIL_WS2K8_FW_MAJOR 1
+#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR)
+
+#define UTIL_FW_MAJOR 3
+#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR)
+
+
+/*
+ * Implementation of host controlled snapshot of the guest.
+ */
+
+#define VSS_OP_REGISTER 128
+
+enum hv_vss_op {
+ VSS_OP_CREATE = 0,
+ VSS_OP_DELETE,
+ VSS_OP_HOT_BACKUP,
+ VSS_OP_GET_DM_INFO,
+ VSS_OP_BU_COMPLETE,
+ /*
+ * Following operations are only supported with IC version >= 5.0
+ */
+ VSS_OP_FREEZE, /* Freeze the file systems in the VM */
+ VSS_OP_THAW, /* Unfreeze the file systems */
+ VSS_OP_AUTO_RECOVER,
+ VSS_OP_COUNT /* Number of operations, must be last */
+};
+
+
+/*
+ * Header for all VSS messages.
+ */
+struct hv_vss_hdr {
+ __u8 operation;
+ __u8 reserved[7];
+} __attribute__((packed));
+
+
+/*
+ * Flag values for the hv_vss_check_feature. Linux supports only
+ * one value.
+ */
+#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
+
+struct hv_vss_check_feature {
+ __u32 flags;
+} __attribute__((packed));
+
+struct hv_vss_check_dm_info {
+ __u32 flags;
+} __attribute__((packed));
+
+struct hv_vss_msg {
+ union {
+ struct hv_vss_hdr vss_hdr;
+ int error;
+ };
+ union {
+ struct hv_vss_check_feature vss_cf;
+ struct hv_vss_check_dm_info dm_info;
+ };
+} __attribute__((packed));
+
+/*
+ * Implementation of a host to guest copy facility.
+ */
+
+#define FCOPY_VERSION_0 0
+#define FCOPY_CURRENT_VERSION FCOPY_VERSION_0
+#define W_MAX_PATH 260
+
+enum hv_fcopy_op {
+ START_FILE_COPY = 0,
+ WRITE_TO_FILE,
+ COMPLETE_FCOPY,
+ CANCEL_FCOPY,
+};
+
+struct hv_fcopy_hdr {
+ __u32 operation;
+ uuid_le service_id0; /* currently unused */
+ uuid_le service_id1; /* currently unused */
+} __attribute__((packed));
+
+#define OVER_WRITE 0x1
+#define CREATE_PATH 0x2
+
+struct hv_start_fcopy {
+ struct hv_fcopy_hdr hdr;
+ __u16 file_name[W_MAX_PATH];
+ __u16 path_name[W_MAX_PATH];
+ __u32 copy_flags;
+ __u64 file_size;
+} __attribute__((packed));
+
+/*
+ * The file is chunked into fragments.
+ */
+#define DATA_FRAGMENT (6 * 1024)
+
+struct hv_do_fcopy {
+ struct hv_fcopy_hdr hdr;
+ __u64 offset;
+ __u32 size;
+ __u8 data[DATA_FRAGMENT];
+};
+
+/*
+ * An implementation of HyperV key value pair (KVP) functionality for Linux.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ */
+
+/*
+ * Maximum value size - used for both key names and value data, and includes
+ * any applicable NULL terminators.
+ *
+ * Note: This limit is somewhat arbitrary, but falls easily within what is
+ * supported for all native guests (back to Win 2000) and what is reasonable
+ * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
+ * limited to 255 character key names.
+ *
+ * MSDN recommends not storing data values larger than 2048 bytes in the
+ * registry.
+ *
+ * Note: This value is used in defining the KVP exchange message - this value
+ * cannot be modified without affecting the message size and compatibility.
+ */
+
+/*
+ * bytes, including any null terminators
+ */
+#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
+
+
+/*
+ * Maximum key size - the registry limit for the length of an entry name
+ * is 256 characters, including the null terminator
+ */
+
+#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
+
+/*
+ * In Linux, we implement the KVP functionality in two components:
+ * 1) The kernel component which is packaged as part of the hv_utils driver
+ * is responsible for communicating with the host and responsible for
+ * implementing the host/guest protocol. 2) A user level daemon that is
+ * responsible for data gathering.
+ *
+ * Host/Guest Protocol: The host iterates over an index and expects the guest
+ * to assign a key name to the index and also return the value corresponding to
+ * the key. The host will have atmost one KVP transaction outstanding at any
+ * given point in time. The host side iteration stops when the guest returns
+ * an error. Microsoft has specified the following mapping of key names to
+ * host specified index:
+ *
+ * Index Key Name
+ * 0 FullyQualifiedDomainName
+ * 1 IntegrationServicesVersion
+ * 2 NetworkAddressIPv4
+ * 3 NetworkAddressIPv6
+ * 4 OSBuildNumber
+ * 5 OSName
+ * 6 OSMajorVersion
+ * 7 OSMinorVersion
+ * 8 OSVersion
+ * 9 ProcessorArchitecture
+ *
+ * The Windows host expects the Key Name and Key Value to be encoded in utf16.
+ *
+ * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
+ * data gathering functionality in a user mode daemon. The user level daemon
+ * is also responsible for binding the key name to the index as well. The
+ * kernel and user-level daemon communicate using a connector channel.
+ *
+ * The user mode component first registers with the
+ * the kernel component. Subsequently, the kernel component requests, data
+ * for the specified keys. In response to this message the user mode component
+ * fills in the value corresponding to the specified key. We overload the
+ * sequence field in the cn_msg header to define our KVP message types.
+ *
+ *
+ * The kernel component simply acts as a conduit for communication between the
+ * Windows host and the user-level daemon. The kernel component passes up the
+ * index received from the Host to the user-level daemon. If the index is
+ * valid (supported), the corresponding key as well as its
+ * value (both are strings) is returned. If the index is invalid
+ * (not supported), a NULL key string is returned.
+ */
+
+
+/*
+ * Registry value types.
+ */
+
+#define REG_SZ 1
+#define REG_U32 4
+#define REG_U64 8
+
+/*
+ * As we look at expanding the KVP functionality to include
+ * IP injection functionality, we need to maintain binary
+ * compatibility with older daemons.
+ *
+ * The KVP opcodes are defined by the host and it was unfortunate
+ * that I chose to treat the registration operation as part of the
+ * KVP operations defined by the host.
+ * Here is the level of compatibility
+ * (between the user level daemon and the kernel KVP driver) that we
+ * will implement:
+ *
+ * An older daemon will always be supported on a newer driver.
+ * A given user level daemon will require a minimal version of the
+ * kernel driver.
+ * If we cannot handle the version differences, we will fail gracefully
+ * (this can happen when we have a user level daemon that is more
+ * advanced than the KVP driver.
+ *
+ * We will use values used in this handshake for determining if we have
+ * workable user level daemon and the kernel driver. We begin by taking the
+ * registration opcode out of the KVP opcode namespace. We will however,
+ * maintain compatibility with the existing user-level daemon code.
+ */
+
+/*
+ * Daemon code not supporting IP injection (legacy daemon).
+ */
+
+#define KVP_OP_REGISTER 4
+
+/*
+ * Daemon code supporting IP injection.
+ * The KVP opcode field is used to communicate the
+ * registration information; so define a namespace that
+ * will be distinct from the host defined KVP opcode.
+ */
+
+#define KVP_OP_REGISTER1 100
+
+enum hv_kvp_exchg_op {
+ KVP_OP_GET = 0,
+ KVP_OP_SET,
+ KVP_OP_DELETE,
+ KVP_OP_ENUMERATE,
+ KVP_OP_GET_IP_INFO,
+ KVP_OP_SET_IP_INFO,
+ KVP_OP_COUNT /* Number of operations, must be last. */
+};
+
+enum hv_kvp_exchg_pool {
+ KVP_POOL_EXTERNAL = 0,
+ KVP_POOL_GUEST,
+ KVP_POOL_AUTO,
+ KVP_POOL_AUTO_EXTERNAL,
+ KVP_POOL_AUTO_INTERNAL,
+ KVP_POOL_COUNT /* Number of pools, must be last. */
+};
+
+/*
+ * Some Hyper-V status codes.
+ */
+
+#define HV_S_OK 0x00000000
+#define HV_E_FAIL 0x80004005
+#define HV_S_CONT 0x80070103
+#define HV_ERROR_NOT_SUPPORTED 0x80070032
+#define HV_ERROR_MACHINE_LOCKED 0x800704F7
+#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
+#define HV_INVALIDARG 0x80070057
+#define HV_GUID_NOTFOUND 0x80041002
+
+#define ADDR_FAMILY_NONE 0x00
+#define ADDR_FAMILY_IPV4 0x01
+#define ADDR_FAMILY_IPV6 0x02
+
+#define MAX_ADAPTER_ID_SIZE 128
+#define MAX_IP_ADDR_SIZE 1024
+#define MAX_GATEWAY_SIZE 512
+
+
+struct hv_kvp_ipaddr_value {
+ __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
+ __u8 addr_family;
+ __u8 dhcp_enabled;
+ __u16 ip_addr[MAX_IP_ADDR_SIZE];
+ __u16 sub_net[MAX_IP_ADDR_SIZE];
+ __u16 gate_way[MAX_GATEWAY_SIZE];
+ __u16 dns_addr[MAX_IP_ADDR_SIZE];
+} __attribute__((packed));
+
+
+struct hv_kvp_hdr {
+ __u8 operation;
+ __u8 pool;
+ __u16 pad;
+} __attribute__((packed));
+
+struct hv_kvp_exchg_msg_value {
+ __u32 value_type;
+ __u32 key_size;
+ __u32 value_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ union {
+ __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
+ __u32 value_u32;
+ __u64 value_u64;
+ };
+} __attribute__((packed));
+
+struct hv_kvp_msg_enumerate {
+ __u32 index;
+ struct hv_kvp_exchg_msg_value data;
+} __attribute__((packed));
+
+struct hv_kvp_msg_get {
+ struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_set {
+ struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_delete {
+ __u32 key_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_register {
+ __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_msg {
+ union {
+ struct hv_kvp_hdr kvp_hdr;
+ int error;
+ };
+ union {
+ struct hv_kvp_msg_get kvp_get;
+ struct hv_kvp_msg_set kvp_set;
+ struct hv_kvp_msg_delete kvp_delete;
+ struct hv_kvp_msg_enumerate kvp_enum_data;
+ struct hv_kvp_ipaddr_value kvp_ip_val;
+ struct hv_kvp_register kvp_register;
+ } body;
+} __attribute__((packed));
+
+struct hv_kvp_ip_msg {
+ __u8 operation;
+ __u8 pool;
+ struct hv_kvp_ipaddr_value kvp_ip_val;
+} __attribute__((packed));
+
+#endif /* _UAPI_HYPERV_H */
diff --git a/tools/Makefile b/tools/Makefile
index feec3ad5fd09..bcae806b0c39 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -7,6 +7,7 @@ help:
@echo ' cgroup - cgroup tools'
@echo ' cpupower - a tool for all things x86 CPU power'
@echo ' firewire - the userspace part of nosy, an IEEE-1394 traffic sniffer'
+ @echo ' hv - tools used when in Hyper-V clients'
@echo ' lguest - a minimal 32-bit x86 hypervisor'
@echo ' perf - Linux performance measurement and analysis tool'
@echo ' selftests - various kernel selftests'
@@ -40,7 +41,7 @@ acpi: FORCE
cpupower: FORCE
$(call descend,power/$@)
-cgroup firewire guest usb virtio vm net: FORCE
+cgroup firewire hv guest usb virtio vm net: FORCE
$(call descend,$@)
libapikfs: FORCE
@@ -64,7 +65,7 @@ acpi_install:
cpupower_install:
$(call descend,power/$(@:_install=),install)
-cgroup_install firewire_install lguest_install perf_install usb_install virtio_install vm_install net_install:
+cgroup_install firewire_install hv_install lguest_install perf_install usb_install virtio_install vm_install net_install:
$(call descend,$(@:_install=),install)
selftests_install:
@@ -76,7 +77,7 @@ turbostat_install x86_energy_perf_policy_install:
tmon_install:
$(call descend,thermal/$(@:_install=),install)
-install: acpi_install cgroup_install cpupower_install firewire_install lguest_install \
+install: acpi_install cgroup_install cpupower_install hv_install firewire_install lguest_install \
perf_install selftests_install turbostat_install usb_install \
virtio_install vm_install net_install x86_energy_perf_policy_install \
tmon
@@ -87,7 +88,7 @@ acpi_clean:
cpupower_clean:
$(call descend,power/cpupower,clean)
-cgroup_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean:
+cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean:
$(call descend,$(@:_clean=),clean)
libapikfs_clean:
@@ -105,7 +106,7 @@ turbostat_clean x86_energy_perf_policy_clean:
tmon_clean:
$(call descend,thermal/tmon,clean)
-clean: acpi_clean cgroup_clean cpupower_clean firewire_clean lguest_clean \
+clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \
perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \
vm_clean net_clean x86_energy_perf_policy_clean tmon_clean
diff --git a/tools/hv/Makefile b/tools/hv/Makefile
new file mode 100644
index 000000000000..bd22f786a60c
--- /dev/null
+++ b/tools/hv/Makefile
@@ -0,0 +1,13 @@
+# Makefile for Hyper-V tools
+
+CC = $(CROSS_COMPILE)gcc
+PTHREAD_LIBS = -lpthread
+WARNINGS = -Wall -Wextra
+CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS)
+
+all: hv_kvp_daemon hv_vss_daemon
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+clean:
+ $(RM) hv_kvp_daemon hv_vss_daemon
diff --git a/tools/hv/hv_fcopy_daemon.c b/tools/hv/hv_fcopy_daemon.c
new file mode 100644
index 000000000000..4ecc4fd0bc1b
--- /dev/null
+++ b/tools/hv/hv_fcopy_daemon.c
@@ -0,0 +1,195 @@
+/*
+ * An implementation of host to guest copy functionality for Linux.
+ *
+ * Copyright (C) 2014, Microsoft, Inc.
+ *
+ * Author : K. Y. Srinivasan <kys@microsoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ */
+
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/poll.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <linux/hyperv.h>
+#include <syslog.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <dirent.h>
+
+static int target_fd;
+static char target_fname[W_MAX_PATH];
+
+static int hv_start_fcopy(struct hv_start_fcopy *smsg)
+{
+ int error = HV_E_FAIL;
+ char *q, *p;
+
+ /*
+ * If possile append a path seperator to the path.
+ */
+ if (strlen((char *)smsg->path_name) < (W_MAX_PATH - 2))
+ strcat((char *)smsg->path_name, "/");
+
+ p = (char *)smsg->path_name;
+ snprintf(target_fname, sizeof(target_fname), "%s/%s",
+ (char *)smsg->path_name, smsg->file_name);
+
+ syslog(LOG_INFO, "Target file name: %s", target_fname);
+ /*
+ * Check to see if the path is already in place; if not,
+ * create if required.
+ */
+ while ((q = strchr(p, '/')) != NULL) {
+ if (q == p) {
+ p++;
+ continue;
+ }
+ *q = '\0';
+ if (access((char *)smsg->path_name, F_OK)) {
+ if (smsg->copy_flags & CREATE_PATH) {
+ if (mkdir((char *)smsg->path_name, 0755)) {
+ syslog(LOG_ERR, "Failed to create %s",
+ (char *)smsg->path_name);
+ goto done;
+ }
+ } else {
+ syslog(LOG_ERR, "Invalid path: %s",
+ (char *)smsg->path_name);
+ goto done;
+ }
+ }
+ p = q + 1;
+ *q = '/';
+ }
+
+ if (!access(target_fname, F_OK)) {
+ syslog(LOG_INFO, "File: %s exists", target_fname);
+ if (!smsg->copy_flags & OVER_WRITE)
+ goto done;
+ }
+
+ target_fd = open(target_fname, O_RDWR | O_CREAT | O_CLOEXEC, 0744);
+ if (target_fd == -1) {
+ syslog(LOG_INFO, "Open Failed: %s", strerror(errno));
+ goto done;
+ }
+
+ error = 0;
+done:
+ return error;
+}
+
+static int hv_copy_data(struct hv_do_fcopy *cpmsg)
+{
+ ssize_t bytes_written;
+
+ bytes_written = pwrite(target_fd, cpmsg->data, cpmsg->size,
+ cpmsg->offset);
+
+ if (bytes_written != cpmsg->size)
+ return HV_E_FAIL;
+
+ return 0;
+}
+
+static int hv_copy_finished(void)
+{
+ close(target_fd);
+ return 0;
+}
+static int hv_copy_cancel(void)
+{
+ close(target_fd);
+ unlink(target_fname);
+ return 0;
+
+}
+
+int main(void)
+{
+ int fd, fcopy_fd, len;
+ int error;
+ int version = FCOPY_CURRENT_VERSION;
+ char *buffer[4096 * 2];
+ struct hv_fcopy_hdr *in_msg;
+
+ if (daemon(1, 0)) {
+ syslog(LOG_ERR, "daemon() failed; error: %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ openlog("HV_FCOPY", 0, LOG_USER);
+ syslog(LOG_INFO, "HV_FCOPY starting; pid is:%d", getpid());
+
+ fcopy_fd = open("/dev/vmbus/hv_fcopy", O_RDWR);
+
+ if (fcopy_fd < 0) {
+ syslog(LOG_ERR, "open /dev/vmbus/hv_fcopy failed; error: %d %s",
+ errno, strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ /*
+ * Register with the kernel.
+ */
+ if ((write(fcopy_fd, &version, sizeof(int))) != sizeof(int)) {
+ syslog(LOG_ERR, "Registration failed: %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ while (1) {
+ /*
+ * In this loop we process fcopy messages after the
+ * handshake is complete.
+ */
+ len = pread(fcopy_fd, buffer, (4096 * 2), 0);
+ if (len < 0) {
+ syslog(LOG_ERR, "pread failed: %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ in_msg = (struct hv_fcopy_hdr *)buffer;
+
+ switch (in_msg->operation) {
+ case START_FILE_COPY:
+ error = hv_start_fcopy((struct hv_start_fcopy *)in_msg);
+ break;
+ case WRITE_TO_FILE:
+ error = hv_copy_data((struct hv_do_fcopy *)in_msg);
+ break;
+ case COMPLETE_FCOPY:
+ error = hv_copy_finished();
+ break;
+ case CANCEL_FCOPY:
+ error = hv_copy_cancel();
+ break;
+
+ default:
+ syslog(LOG_ERR, "Unknown operation: %d",
+ in_msg->operation);
+
+ }
+
+ if (pwrite(fcopy_fd, &error, sizeof(int), 0) != sizeof(int)) {
+ syslog(LOG_ERR, "pwrite failed: %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ }
+}
diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c
index 520de3304571..6a213b8cd7b9 100644
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -87,6 +87,8 @@ static int vss_operate(int operation)
continue;
if (strcmp(ent->mnt_type, "iso9660") == 0)
continue;
+ if (strcmp(ent->mnt_type, "vfat") == 0)
+ continue;
if (strcmp(ent->mnt_dir, "/") == 0) {
root_seen = 1;
continue;