summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt13
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,kirkwood.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.txt35
-rw-r--r--Documentation/devicetree/bindings/clock/imx6ul-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt4
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/synopsys.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt36
-rw-r--r--Documentation/devicetree/bindings/reset/socfpga-reset.txt2
-rw-r--r--Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt2
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-omap.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt3
-rw-r--r--Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt6
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt2
-rw-r--r--arch/arm/boot/dts/Makefile41
-rw-r--r--arch/arm/boot/dts/am335x-boneblack.dts20
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts69
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts62
-rw-r--r--arch/arm/boot/dts/am335x-phycore-som.dtsi368
-rw-r--r--arch/arm/boot/dts/am335x-wega-rdk.dts22
-rw-r--r--arch/arm/boot/dts/am335x-wega.dtsi151
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi25
-rw-r--r--arch/arm/boot/dts/am4372.dtsi67
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts185
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts45
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts130
-rw-r--r--arch/arm/boot/dts/am43xx-clocks.dtsi9
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts1
-rw-r--r--arch/arm/boot/dts/armada-375.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-388-gp.dts12
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi8
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi8
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts134
-rw-r--r--arch/arm/boot/dts/at91-sama5d4_xplained.dts9
-rw-r--r--arch/arm/boot/dts/at91-sama5d4ek.dts9
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi10
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi11
-rw-r--r--arch/arm/boot/dts/at91sam9261.dtsi7
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi7
-rw-r--r--arch/arm/boot/dts/at91sam9g15.dtsi1
-rw-r--r--arch/arm/boot/dts/at91sam9g15ek.dts25
-rw-r--r--arch/arm/boot/dts/at91sam9g35.dtsi1
-rw-r--r--arch/arm/boot/dts/at91sam9g35ek.dts21
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi60
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts47
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi83
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts61
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi8
-rw-r--r--arch/arm/boot/dts/at91sam9x35.dtsi1
-rw-r--r--arch/arm/boot/dts/at91sam9x35ek.dts20
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi12
-rw-r--r--arch/arm/boot/dts/at91sam9x5_lcd.dtsi139
-rw-r--r--arch/arm/boot/dts/at91sam9x5dm.dtsi101
-rw-r--r--arch/arm/boot/dts/atlas7-evb.dts18
-rw-r--r--arch/arm/boot/dts/atlas7.dtsi97
-rw-r--r--arch/arm/boot/dts/axp152.dtsi49
-rw-r--r--arch/arm/boot/dts/bcm-cygnus-clock.dtsi89
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi.dtsi7
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-netgear-r6250.dts14
-rw-r--r--arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts4
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi10
-rw-r--r--arch/arm/boot/dts/bcm7445.dtsi50
-rw-r--r--arch/arm/boot/dts/cros-ec-sbs.dtsi52
-rw-r--r--arch/arm/boot/dts/cx92755.dtsi7
-rw-r--r--arch/arm/boot/dts/cx92755_equinox.dts3
-rw-r--r--arch/arm/boot/dts/dm8148-evm.dts28
-rw-r--r--arch/arm/boot/dts/dm8148-t410.dts28
-rw-r--r--arch/arm/boot/dts/dm814x-clocks.dtsi109
-rw-r--r--arch/arm/boot/dts/dm814x.dtsi333
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi2
-rw-r--r--arch/arm/boot/dts/dove.dtsi604
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts18
-rw-r--r--arch/arm/boot/dts/dra7.dtsi95
-rw-r--r--arch/arm/boot/dts/dra72-evm.dts26
-rw-r--r--arch/arm/boot/dts/dra74x.dtsi7
-rw-r--r--arch/arm/boot/dts/emev2-kzm9d.dts8
-rw-r--r--arch/arm/boot/dts/emev2.dtsi48
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts620
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts3
-rw-r--r--arch/arm/boot/dts/exynos5250-pinctrl.dtsi1600
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5410-smdk5410.dts6
-rw-r--r--arch/arm/boot/dts/exynos5420-pinctrl.dtsi1411
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi59
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi46
-rw-r--r--arch/arm/boot/dts/imx27.dtsi9
-rw-r--r--arch/arm/boot/dts/imx53-qsb-common.dtsi5
-rw-r--r--arch/arm/boot/dts/imx53-qsrb.dts14
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw51xx.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw52xx.dtsi35
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw53xx.dtsi35
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw54xx.dtsi34
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw551x.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw552x.dtsi1
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi39
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi137
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabrelite.dtsi39
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi52
-rw-r--r--arch/arm/boot/dts/imx6sl-warp.dts32
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi21
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi28
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dts343
-rw-r--r--arch/arm/boot/dts/imx6ul-pinfunc.h938
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi707
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi260
-rw-r--r--arch/arm/boot/dts/kirkwood-lswvl.dts301
-rw-r--r--arch/arm/boot/dts/kirkwood-lswxl.dts301
-rw-r--r--arch/arm/boot/dts/lpc18xx.dtsi267
-rw-r--r--arch/arm/boot/dts/lpc4337-ciaa.dts187
-rw-r--r--arch/arm/boot/dts/lpc4350-hitex-eval.dts244
-rw-r--r--arch/arm/boot/dts/lpc4357-ea4357-devkit.dts467
-rw-r--r--arch/arm/boot/dts/ls1021a-qds.dts89
-rw-r--r--arch/arm/boot/dts/ls1021a-twr.dts81
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi106
-rw-r--r--arch/arm/boot/dts/mt6580-evbp1.dts38
-rw-r--r--arch/arm/boot/dts/mt6580.dtsi116
-rw-r--r--arch/arm/boot/dts/mt8135-evbp1.dts193
-rw-r--r--arch/arm/boot/dts/mt8135.dtsi58
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-common.dtsi369
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi73
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-lcd43.dts37
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000-lcd70.dts37
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000.dts191
-rw-r--r--arch/arm/boot/dts/omap3-lilly-a83x.dtsi12
-rw-r--r--arch/arm/boot/dts/omap3-overo-base.dtsi55
-rw-r--r--arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi3
-rw-r--r--arch/arm/boot/dts/omap3-overo-palo35-common.dtsi53
-rw-r--r--arch/arm/boot/dts/omap3-overo-palo35.dts37
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-palo35.dts37
-rw-r--r--arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts21
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi65
-rw-r--r--arch/arm/boot/dts/omap3-overo-tobiduo.dts21
-rw-r--r--arch/arm/boot/dts/omap3-overo.dtsi4
-rw-r--r--arch/arm/boot/dts/omap3-pandora-1ghz.dts2
-rw-r--r--arch/arm/boot/dts/omap3-pandora-600mhz.dts2
-rw-r--r--arch/arm/boot/dts/omap3-pandora-common.dtsi54
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts7
-rw-r--r--arch/arm/boot/dts/omap5.dtsi7
-rw-r--r--arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts273
-rw-r--r--arch/arm/boot/dts/orion5x-lswsgl.dts276
-rw-r--r--arch/arm/boot/dts/pxa27x.dtsi36
-rw-r--r--arch/arm/boot/dts/pxa2xx.dtsi4
-rw-r--r--arch/arm/boot/dts/pxa3xx.dtsi52
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts20
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-ifc6410.dts40
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi91
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi11
-rw-r--r--arch/arm/boot/dts/qcom-msm8960-cdp.dts302
-rw-r--r--arch/arm/boot/dts/qcom-msm8960.dtsi49
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi32
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi19
-rw-r--r--arch/arm/boot/dts/r8a73a4.dtsi9
-rw-r--r--arch/arm/boot/dts/r8a7740-armadillo800eva.dts13
-rw-r--r--arch/arm/boot/dts/r8a7740.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7778.dtsi22
-rw-r--r--arch/arm/boot/dts/r8a7779.dtsi28
-rw-r--r--arch/arm/boot/dts/r8a7790-lager.dts4
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi138
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts2
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi120
-rw-r--r--arch/arm/boot/dts/r8a7793-gose.dts63
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi374
-rw-r--r--arch/arm/boot/dts/r8a7794-silk.dts102
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi48
-rw-r--r--arch/arm/boot/dts/rk3066a-bqcurie2.dts1
-rw-r--r--arch/arm/boot/dts/rk3066a-marsboard.dts13
-rw-r--r--arch/arm/boot/dts/rk3066a-rayeager.dts5
-rw-r--r--arch/arm/boot/dts/rk3066a.dtsi22
-rw-r--r--arch/arm/boot/dts/rk3188-radxarock.dts5
-rw-r--r--arch/arm/boot/dts/rk3188.dtsi22
-rw-r--r--arch/arm/boot/dts/rk3288-evb.dtsi1
-rw-r--r--arch/arm/boot/dts/rk3288-firefly.dtsi3
-rw-r--r--arch/arm/boot/dts/rk3288-popmetal.dts1
-rw-r--r--arch/arm/boot/dts/rk3288-r89.dts413
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi232
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jerry.dts197
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts230
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-pinky.dts128
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi122
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-speedy.dts155
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi563
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi31
-rw-r--r--arch/arm/boot/dts/rk3xxx.dtsi10
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi926
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi10
-rw-r--r--arch/arm/boot/dts/sama5d3_tcb1.dtsi4
-rw-r--r--arch/arm/boot/dts/sama5d4.dtsi25
-rw-r--r--arch/arm/boot/dts/sh73a0.dtsi3
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi46
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi11
-rw-r--r--arch/arm/boot/dts/socfpga_arria10_socdk.dtsi3
-rw-r--r--arch/arm/boot/dts/socfpga_arria5_socdk.dts3
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts111
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_socdk.dts3
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_sockit.dts3
-rw-r--r--arch/arm/boot/dts/stih407-clock.dtsi4
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi45
-rw-r--r--arch/arm/boot/dts/stih407-pinctrl.dtsi200
-rw-r--r--arch/arm/boot/dts/stih407.dtsi28
-rw-r--r--arch/arm/boot/dts/stih410-clock.dtsi4
-rw-r--r--arch/arm/boot/dts/stih410.dtsi12
-rw-r--r--arch/arm/boot/dts/stih418-clock.dtsi4
-rw-r--r--arch/arm/boot/dts/stih418.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts75
-rw-r--r--arch/arm/boot/dts/stm32f429-disco.dts8
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi79
-rw-r--r--arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts15
-rw-r--r--arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts34
-rw-r--r--arch/arm/boot/dts/sun4i-a10-cubieboard.dts19
-rw-r--r--arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts202
-rw-r--r--arch/arm/boot/dts/sun4i-a10-mini-xplus.dts15
-rw-r--r--arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts32
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi16
-rw-r--r--arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts37
-rw-r--r--arch/arm/boot/dts/sun5i-a13-hsg-h702.dts58
-rw-r--r--arch/arm/boot/dts/sun5i-a13-olinuxino.dts37
-rw-r--r--arch/arm/boot/dts/sun5i-a13-utoo-p66.dts29
-rw-r--r--arch/arm/boot/dts/sun5i.dtsi16
-rw-r--r--arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts5
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi16
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-cs908.dts5
-rw-r--r--arch/arm/boot/dts/sun7i-a20-cubietruck.dts56
-rw-r--r--arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts2
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts32
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts32
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi16
-rw-r--r--arch/arm/boot/dts/sun8i-a23-a33.dtsi25
-rw-r--r--arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts9
-rw-r--r--arch/arm/boot/dts/sun8i-a23.dtsi33
-rw-r--r--arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts17
-rw-r--r--arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts133
-rw-r--r--arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts13
-rw-r--r--arch/arm/boot/dts/sun8i-a33.dtsi33
-rw-r--r--arch/arm/boot/dts/sunxi-common-regulators.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi5
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts25
-rw-r--r--arch/arm/boot/dts/tegra124-venice2.dts10
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi50
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi5
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi5
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts38
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-ld4.dtsi143
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts105
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi67
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts40
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-pro4.dtsi158
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-pro5.dtsi252
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts46
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-sld3.dtsi122
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts42
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-sld8.dtsi143
-rw-r--r--arch/arm/boot/dts/uniphier-pinctrl.dtsi105
-rw-r--r--arch/arm/boot/dts/uniphier-proxstream2.dtsi273
-rw-r--r--arch/arm/boot/dts/uniphier-ref-daughter.dtsi50
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi2
-rw-r--r--arch/arm/boot/dts/vexpress-v2m.dtsi2
-rw-r--r--arch/arm/boot/dts/vf-colibri-eval-v3.dtsi2
-rw-r--r--arch/arm/boot/dts/vfxxx.dtsi85
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi10
-rw-r--r--arch/arm/boot/dts/zynq-zc702.dts28
-rw-r--r--arch/arm/configs/omap2plus_defconfig3
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c157
-rw-r--r--arch/arm/mach-orion5x/Kconfig6
-rw-r--r--arch/arm/mach-orion5x/Makefile1
-rw-r--r--arch/arm/mach-orion5x/lsmini-setup.c280
-rw-r--r--drivers/clk/ti/clk-43xx.c1
-rw-r--r--drivers/pinctrl/pinctrl-tegra.c19
-rw-r--r--include/dt-bindings/clock/r8a7790-clock.h3
-rw-r--r--include/dt-bindings/clock/r8a7791-clock.h2
-rw-r--r--include/dt-bindings/clock/r8a7793-clock.h164
-rw-r--r--include/dt-bindings/pinctrl/am43xx.h1
-rw-r--r--include/dt-bindings/pinctrl/dra.h20
-rw-r--r--include/dt-bindings/reset/altr,rst-mgr-a10.h110
282 files changed, 20100 insertions, 3197 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 23c097812d98..7fd64ec9ee1d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -52,6 +52,7 @@ System Timer (ST) required properties:
- reg: Should contain registers location and length
- interrupts: Should contain interrupt for the ST which is the IRQ line
shared across all System Controller members.
+- clocks: phandle to input clock.
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
@@ -63,7 +64,7 @@ TC/TCLIB Timer required properties:
Note that you can specify several interrupt cells if the TC
block has one interrupt per channel.
- clock-names: tuple listing input clock names.
- Required elements: "t0_clk"
+ Required elements: "t0_clk", "slow_clk"
Optional elements: "t1_clk", "t2_clk"
- clocks: phandles to input clocks.
@@ -91,12 +92,14 @@ RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
Example:
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
RAMC SDRAM/DDR Controller required properties:
@@ -119,6 +122,7 @@ required properties:
- compatible: Should be "atmel,<chip>-shdwc".
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
- reg: Should contain registers location and length
+- clocks: phandle to input clock.
optional properties:
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -137,9 +141,10 @@ optional at91sam9x5 properties:
Example:
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000000..6824b3180ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible: Should be "raspberrypi,bcm2835-firmware"
+- mboxes: Phandle to the firmware device's Mailbox.
+ (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fee4b..5171ad8f48ff 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
board. Currently known boards are:
"buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
"dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29db6..2daa424a13a4 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
Required root node property:
compatible: Must contain one of
+ "mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
"mediatek,mt8127"
@@ -14,6 +15,9 @@ compatible: Must contain one of
Supported boards:
+- Evaluation board for MT6580:
+ Required root node properties:
+ - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352ccd8..3c9c3a7f3d25 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -11,6 +11,7 @@ Required properties:
"mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq"
+ "mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef1d1..9f4e5136e568 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
- AM335X OrionLXm : Substation Automation Platform
compatible = "novatech,am335x-lxm", "ti,am33xx"
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+ compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a9b5..af58cd74aeff 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+ Required root node properties:
+ - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+ "google,veyron-jerry-rev3", "google,veyron-jerry",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+ Required root node properties:
+ - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+ "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+ "google,veyron-minnie-rev0", "google,veyron-minnie",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+ Required root node properties:
+ - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+ "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+ "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+ "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+ Required root node properties:
+ - compatible = "rockchip,r88", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
new file mode 100644
index 000000000000..571d5039f663
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6ul-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h
+for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index efb51cf0c845..d8b168ebd5f1 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -21,8 +21,8 @@ Required properties:
"st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
"st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
- "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_0", "st,clkgen-plls-c32"
+ "sst,plls-c32-cx_1", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index f9c6454146b6..a43d26d41e04 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,5 +1,9 @@
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+This controller has an optional ECC support in half-bus width (16-bit)
+configuration. The ECC controller corrects one bit error and detects
+two bit errors.
+
Required properties:
- compatible: Should be 'xlnx,zynq-ddrc-a05'
- reg: Base address and size of the controllers memory area
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 000000000000..a81bbf37ed66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 32c1c8bfd5dc..98c9f560e5c5 100644
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager
Required properties:
- compatible : "altr,rst-mgr"
- reg : Should contain 1 register ranges(address and length)
+- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
Example:
@@ -10,4 +11,5 @@ Example:
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
index 34c1505774bf..5d3791e789c6 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -5,6 +5,7 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: rtc alarm/event interrupt
+- clocks: phandle to input clock.
Example:
@@ -12,4 +13,5 @@ rtc@fffffe00 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x100>;
interrupts = <1 4 7>;
+ clocks = <&clk32k>;
};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
index 4ba4dbd34289..43a83668673a 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -8,6 +8,7 @@ Required properties:
Wakeup generation for event Alarm. It can also be
used to control an external PMIC via the
pmic_power_en pin.
+ - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
- interrupt-parent: phandle for the interrupt controller
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 8d63f1da07aa..a875997f2062 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -7,8 +7,9 @@ Required properties:
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
* "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582,
- MT6577)
+ MT6580, MT6577)
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 7c4408ff4b83..53a3029b7589 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
---------------------------------------
Required properties:
-- compatible: Should be "mediatek,mt6577-timer"
+- compatible should contain:
+ * "mediatek,mt6589-timer" for MT6589 compatible timers
+ * "mediatek,mt6580-timer" for MT6580 compatible timers
+ * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
+ MT6577)
- reg: Should contain location and length for timers register.
- clocks: Clocks driving the timer hardware. This list should include two
clocks. The order is system clock and as second clock the RTC clock.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d444757c4d9e..d3fbd1f30eb4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -46,6 +46,7 @@ chipone ChipOne
chipspark ChipSPARK
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
+ciaa Computadora Industrial Abierta Argentina
cirrus Cirrus Logic, Inc.
cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc.
@@ -135,6 +136,7 @@ mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
+msi Micro-Star International Co. Ltd.
mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
mundoreader Mundo Reader S.L.
murata Murata Manufacturing Co., Ltd.
@@ -143,6 +145,7 @@ national National Semiconductor
neonode Neonode Inc.
netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems)
+netxeon Shenzhen Netxeon Technology CO., LTD
newhaven Newhaven Display International
nintendo Nintendo
nokia Nokia
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index a4d869744f59..86fa6de1019b 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible: must be "atmel,at91sam9260-wdt".
- reg: physical base address of the controller and length of memory mapped
region.
+- clocks: phandle to input clock.
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
@@ -39,6 +40,7 @@ Example:
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
timeout-sec = <15>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 917aa318929d..233159d2eaab 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
@@ -176,6 +177,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-km_kirkwood.dtb \
kirkwood-laplug.dtb \
kirkwood-lschlv2.dtb \
+ kirkwood-lswvl.dtb \
+ kirkwood-lswxl.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
@@ -211,6 +214,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_LPC18XX) += \
+ lpc4337-ciaa.dtb \
lpc4350-hitex-eval.dtb \
lpc4357-ea4357-devkit.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
@@ -331,6 +335,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+ imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
@@ -390,6 +396,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-cm-t3530.dtb \
omap3-cm-t3730.dtb \
omap3-devkit8000.dtb \
+ omap3-devkit8000-lcd43.dtb \
+ omap3-devkit8000-lcd70.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-gta04a3.dtb \
@@ -409,15 +417,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-overo-alto35.dtb \
omap3-overo-chestnut43.dtb \
omap3-overo-gallop43.dtb \
+ omap3-overo-palo35.dtb \
omap3-overo-palo43.dtb \
omap3-overo-storm-alto35.dtb \
omap3-overo-storm-chestnut43.dtb \
omap3-overo-storm-gallop43.dtb \
+ omap3-overo-storm-palo35.dtb \
omap3-overo-storm-palo43.dtb \
omap3-overo-storm-summit.dtb \
omap3-overo-storm-tobi.dtb \
+ omap3-overo-storm-tobiduo.dtb \
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
+ omap3-overo-tobiduo.dtb \
omap3-pandora-600mhz.dtb \
omap3-pandora-1ghz.dtb \
omap3-sbc-t3517.dtb \
@@ -426,6 +438,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-thunder.dtb \
omap3-zoom3.dtb
dtb-$(CONFIG_SOC_TI81XX) += \
+ dm8148-evm.dtb \
+ dm8148-t410.dtb \
dm8168-evm.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
am335x-baltos-ir5221.dtb \
@@ -438,7 +452,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-nano.dtb \
am335x-pepper.dtb \
am335x-lxm.dtb \
- am335x-chiliboard.dtb
+ am335x-chiliboard.dtb \
+ am335x-wega-rdk.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-panda.dtb \
@@ -464,6 +479,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-linkstation-lswtgl.dtb \
+ orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
@@ -488,7 +505,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
- rk3288-firefly.dtb
+ rk3288-firefly.dtb \
+ rk3288-r89.dtb \
+ rk3288-veyron-jerry.dtb \
+ rk3288-veyron-minnie.dtb \
+ rk3288-veyron-pinky.dtb \
+ rk3288-veyron-speedy.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
@@ -513,12 +535,15 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
+ r8a7793-gose.dtb \
r8a7794-alt.dtb \
+ r8a7794-silk.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_socdk.dtb \
+ socfpga_cyclone5_de0_sockit.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_vt.dtb
@@ -541,7 +566,9 @@ dtb-$(CONFIG_ARCH_STI) += \
stih416-b2020.dtb \
stih416-b2020e.dtb \
stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
+dtb-$(CONFIG_ARCH_STM32)+= \
+ stm32f429-disco.dtb \
+ stm32429i-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
@@ -551,6 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-itead-iteaduino-plus.dts \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
@@ -598,6 +626,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
+ sun8i-a33-ippo-q8h-v1.2.dtb \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
@@ -639,10 +668,11 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
- uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-ld4-ref.dtb \
+ uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
- uniphier-ph1-sld8-ref.dtb
+ uniphier-ph1-sld3-ref.dtb \
+ uniphier-ph1-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
@@ -702,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
dove-dove-db.dtb \
dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt8127-moose.dtb \
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d259fa68..eadbba32386d 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -68,16 +68,26 @@
&lcdc {
status = "okay";
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
};
-/ {
- hdmi {
- compatible = "ti,tilcdc,slave";
- i2c = <&i2c0>;
+&i2c0 {
+ tda19988 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
- status = "okay";
+
+ port {
+ hdmi_0: endpoint@0 {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 765be2766eb0..1942a5c8132d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -136,16 +136,29 @@
};
sound {
- compatible = "ti,da830-evm-audio";
- ti,model = "AM335x-EVM";
- ti,audio-codec = <&tlv320aic3106>;
- ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <12000000>;
- ti,audio-routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT",
- "LINE1L", "Line In",
- "LINE1R", "Line In";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM335x-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <12000000>;
+ };
};
};
@@ -342,7 +355,7 @@
>;
};
- am335x_evm_audio_pins: am335x_evm_audio_pins {
+ mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@@ -351,6 +364,15 @@
>;
};
+ mcasp1_pins_sleep: mcasp1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
@@ -460,6 +482,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@@ -575,19 +598,21 @@
#include "tps65910.dtsi"
&mcasp1 {
- pinctrl-names = "default";
- pinctrl-0 = <&am335x_evm_audio_pins>;
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
- status = "okay";
+ status = "okay";
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- /* 4 serializers */
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 0 0 1 2
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tps {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 156d05efcb70..315bb02c9920 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -141,14 +141,26 @@
};
sound {
- compatible = "ti,da830-evm-audio";
- ti,model = "AM335x-EVMSK";
- ti,audio-codec = <&tlv320aic3106>;
- ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24000000>;
- ti,audio-routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM335x-EVMSK";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24000000>;
+ };
};
panel {
@@ -396,6 +408,15 @@
>;
};
+ mcasp1_pins_sleep: mcasp1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
@@ -462,6 +483,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@@ -661,19 +683,21 @@
};
&mcasp1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcasp1_pins>;
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
- status = "okay";
+ status = "okay";
- op-mode = <0>; /* MCASP_IIS_MODE */
- tdm-slots = <2>;
- /* 4 serializers */
- serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
- 0 0 1 2
- >;
- tx-num-evt = <32>;
- rx-num-evt = <32>;
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tscadc {
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000000..4d28fc3aac69
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "Phytec AM335x phyCORE";
+ compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &rtc;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ };
+};
+
+/* Crypto Module */
+&aes {
+ status = "okay";
+};
+
+&sham {
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet0_pins: pinmux_ethernet0 {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ mdio_pins: pinmux_mdio {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ status = "okay";
+};
+
+&mac {
+ slaves = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet0_pins>;
+ status = "okay";
+};
+
+&phy_sel {
+ rmii-clock-ext;
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+ i2c0_pins: pinmux_i2c0 {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ tps: pmic@2d {
+ reg = <0x2d>;
+ };
+
+ i2c_eeprom: eeprom@52 {
+ compatible = "atmel,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ status = "disabled";
+ };
+
+ i2c_rtc: rtc@68 {
+ compatible = "rv4162";
+ reg = <0x68>;
+ status = "disabled";
+ };
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+ nandflash_pins: pinmux_nandflash {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
+ nandflash: nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,device-nand = "true";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <30>;
+ gpmc,cs-wr-off-ns = <30>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <30>;
+ gpmc,adv-wr-off-ns = <30>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <20>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <30>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <30>;
+ gpmc,wr-cycle-ns = <30>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <50>;
+ gpmc,cycle2cycle-diffcsen;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <30>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ elm_id = <&elm>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "xload";
+ reg = <0x0 0x20000>;
+ };
+ partition@1 {
+ label = "xload_backup1";
+ reg = <0x20000 0x20000>;
+ };
+ partition@2 {
+ label = "xload_backup2";
+ reg = <0x40000 0x20000>;
+ };
+ partition@3 {
+ label = "xload_backup3";
+ reg = <0x60000 0x20000>;
+ };
+ partition@4 {
+ label = "barebox";
+ reg = <0x80000 0x80000>;
+ };
+ partition@5 {
+ label = "bareboxenv";
+ reg = <0x100000 0x40000>;
+ };
+ partition@6 {
+ label = "oftree";
+ reg = <0x140000 0x40000>;
+ };
+ partition@7 {
+ label = "kernel";
+ reg = <0x180000 0x800000>;
+ };
+ partition@8 {
+ label = "root";
+ reg = <0x980000 0x0>;
+ };
+ };
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-name = "vdig1_1p8v";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
+ 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ serial_flash: m25p80@0 {
+ compatible = "m25p80";
+ spi-max-frequency = <48000000>;
+ reg = <0x0>;
+ m25p,fast-read;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "xload";
+ reg = <0x0 0x20000>;
+ };
+ partition@1 {
+ label = "barebox";
+ reg = <0x20000 0x80000>;
+ };
+ partition@2 {
+ label = "bareboxenv";
+ reg = <0xa0000 0x20000>;
+ };
+ partition@3 {
+ label = "oftree";
+ reg = <0xc0000 0x20000>;
+ };
+ partition@4 {
+ label = "kernel";
+ reg = <0xe0000 0x0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000000..6431b7db8109
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&i2c_eeprom {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644
index 000000000000..5e541bd1b45a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ model = "Phytec AM335x phyBOARD-WEGA";
+ compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+ dcan1_pins: pinmux_dcan1 {
+ pinctrl-single,pins = <
+ 0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ 0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet1_pins: pinmux_ethernet1 {
+ pinctrl-single,pins = <
+ 0x40 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ 0x48 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ 0x4c (PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ 0x50 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ 0x54 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
+ >;
+ };
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
+ dual_emac_res_vlan = <2>;
+};
+
+&mac {
+ slaves = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+ dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+ mmc1_pins: pinmux_mmc1 {
+ pinctrl-single,pins = <
+ 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+ uart0_pins: pinmux_uart0 {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+/* USB */
+&cppi41dma {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index b76f9a2ce05d..9117c1a1a4e2 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -103,6 +103,15 @@
#size-cells = <1>;
ranges = <0 0x44c00000 0x280000>;
+ wkup_m3: wkup_m3@100000 {
+ compatible = "ti,am3352-wkup-m3";
+ reg = <0x100000 0x4000>,
+ <0x180000 0x2000>;
+ reg-names = "umem", "dmem";
+ ti,hwmods = "wkup_m3";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
+
prcm: prcm@200000 {
compatible = "ti,am3-prcm";
reg = <0x200000 0x4000>;
@@ -144,6 +153,14 @@
};
};
+ wkup_m3_ipc: wkup_m3_ipc@1324 {
+ compatible = "ti,am3352-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&mailbox &mbox_wkupm3>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -762,14 +779,6 @@
reg = <0x40300000 0x10000>; /* 64k */
};
- wkup_m3: wkup_m3@44d00000 {
- compatible = "ti,am3353-wkup-m3";
- reg = <0x44d00000 0x4000 /* M3 UMEM */
- 0x44d80000 0x2000>; /* M3 DMEM */
- ti,hwmods = "wkup_m3";
- ti,no-reset-on-init;
- };
-
elm: elm@48080000 {
compatible = "ti,am3352-elm";
reg = <0x48080000 0x2000>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 359a3b6daf4f..564900b9fcce 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -23,6 +23,11 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
};
@@ -59,6 +64,27 @@
interrupt-parent = <&gic>;
};
+ scu: scu@48240000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x48240000 0x100>;
+ };
+
+ global_timer: timer@48240200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x48240200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&dpll_mpu_m2_ck>;
+ };
+
+ local_timer: timer@48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&dpll_mpu_m2_ck>;
+ };
+
l2-cache-controller@48242000 {
compatible = "arm,pl310-cache";
reg = <0x48242000 0x1000>;
@@ -83,6 +109,15 @@
#size-cells = <1>;
ranges = <0 0x44c00000 0x287000>;
+ wkup_m3: wkup_m3@100000 {
+ compatible = "ti,am4372-wkup-m3";
+ reg = <0x100000 0x4000>,
+ <0x180000 0x2000>;
+ reg-names = "umem", "dmem";
+ ti,hwmods = "wkup_m3";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
+
prcm: prcm@1f0000 {
compatible = "ti,am4-prcm";
reg = <0x1f0000 0x11000>;
@@ -128,6 +163,14 @@
};
};
+ wkup_m3_ipc: wkup_m3_ipc@1324 {
+ compatible = "ti,am4372-wkup-m3-ipc";
+ reg = <0x1324 0x44>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&mailbox &mbox_wkupm3>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -309,7 +352,8 @@
};
rtc: rtc@44e3e000 {
- compatible = "ti,am4372-rtc","ti,da830-rtc";
+ compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+ "ti,da830-rtc";
reg = <0x44e3e000 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -528,8 +572,11 @@
#address-cells = <1>;
#size-cells = <1>;
ti,hwmods = "cpgmac0";
- clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
- clock-names = "fck", "cpts";
+ clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
+ <&dpll_clksel_mac_clk>;
+ clock-names = "fck", "cpts", "50mclk";
+ assigned-clocks = <&dpll_clksel_mac_clk>;
+ assigned-clock-rates = <50000000>;
status = "disabled";
cpdma_channels = <8>;
ale_entries = <1024>;
@@ -866,7 +913,12 @@
usb1: usb@48390000 {
compatible = "synopsys,dwc3";
reg = <0x48390000 0x10000>;
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
@@ -890,7 +942,12 @@
usb2: usb@483d0000 {
compatible = "synopsys,dwc3";
reg = <0x483d0000 0x10000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..215775dc6948 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -21,12 +21,11 @@
aliases {
display0 = &lcd0;
- serial3 = &uart3;
};
- vmmcsd_fixed: fixedregulator-sd {
+ evm_v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
+ regulator-name = "evm_v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
@@ -83,17 +82,6 @@
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pins>;
-
- /*
- * SelLCDorHDMI, LOW to select HDMI. This is not really the
- * panel's enable GPIO, but we don't have HDMI driver support nor
- * support to switch between two displays, so using this gpio as
- * panel's enable should be safe.
- */
- enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
@@ -124,6 +112,32 @@
clock-frequency = <12000000>;
};
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM437x-GP-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-frequency = <12000000>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <12000000>;
+ };
+ };
};
&am43xx_pinmux {
@@ -217,7 +231,6 @@
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
- 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
@@ -270,7 +283,7 @@
>;
};
- lcd_pins: lcd_pins {
+ display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPIO 5_8 to select LCD / HDMI */
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -409,6 +422,60 @@
0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
>;
};
+
+ mcasp1_pins: mcasp1_pins {
+ pinctrl-single,pins = <
+ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ mcasp1_sleep_pins: mcasp1_sleep_pins {
+ pinctrl-single,pins = <
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ gpio0_pins: gpio0_pins {
+ pinctrl-single,pins = <
+ 0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+ >;
+ };
+
+ emmc_pins_default: emmc_pins_default {
+ pinctrl-single,pins = <
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
+ emmc_pins_sleep: emmc_pins_sleep {
+ pinctrl-single,pins = <
+ 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+ 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+ 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+ 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+ 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ >;
+ };
};
&i2c0 {
@@ -455,6 +522,8 @@
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
};
dcdc6: regulator-dcdc6 {
@@ -462,6 +531,8 @@
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
};
ldo1: regulator-ldo1 {
@@ -521,6 +592,19 @@
};
};
};
+
+ tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+ AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+ DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+ DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+ };
};
&epwmss0 {
@@ -542,7 +626,23 @@
};
&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio0_pins>;
status = "okay";
+
+ p23 {
+ gpio-hog;
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ /* SelEMMCorNAND selects between eMMC and NAND:
+ * Low: NAND
+ * High: eMMC
+ * When changing this line make sure the newly
+ * selected device node is enabled and the previously
+ * selected device node is disabled.
+ */
+ output-low;
+ line-name = "SelEMMCorNAND";
+ };
};
&gpio1 {
@@ -558,19 +658,48 @@
};
&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_mux_pins>;
status = "okay";
ti,no-reset-on-init;
+
+ p8 {
+ /*
+ * SelLCDorHDMI selects between display and audio paths:
+ * Low: HDMI display with audio via HDMI
+ * High: LCD display with analog audio via aic3111 codec
+ */
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SelLCDorHDMI";
+ };
};
&mmc1 {
status = "okay";
- vmmc-supply = <&vmmcsd_fixed>;
+ vmmc-supply = <&evm_v3_3d>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+/* eMMC sits on mmc2 */
+&mmc2 {
+ /*
+ * When enabling eMMC, disable GPMC/NAND and set
+ * SelEMMCorNAND to output-high
+ */
+ status = "disabled";
+ vmmc-supply = <&evm_v3_3d>;
+ bus-width = <8>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_sleep>;
+ ti,non-removable;
+};
+
&mmc3 {
status = "okay";
/* these are on the crossbar and are outlined in the
@@ -651,6 +780,10 @@
};
&gpmc {
+ /*
+ * When enabling GPMC, disable eMMC and set
+ * SelEMMCorNAND to output-low
+ */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
@@ -790,3 +923,21 @@
};
};
};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_sleep_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d2c167..22af44894c66 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -32,14 +32,29 @@
};
sound {
- compatible = "ti,da830-evm-audio";
- ti,model = "AM437x-SK-EVM";
- ti,audio-codec = <&tlv320aic3106>;
- ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24000000>;
- ti,audio-routing =
- "Headphone Jack", "HPLOUT",
- "Headphone Jack", "HPROUT";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM437x-SK-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24000000>;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -364,6 +379,15 @@
>;
};
+ mcasp1_pins_sleep: mcasp1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
lcd_pins: lcd_pins {
pinctrl-single,pins = <
0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
@@ -480,6 +504,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
+ #sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@@ -640,8 +665,10 @@
};
&mcasp1 {
- pinctrl-names = "default";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_pins_sleep>;
status = "okay";
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 795d68af6df9..86c2dfbe8875 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
/ {
model = "TI AM43x EPOS EVM";
@@ -31,21 +32,18 @@
enable-active-high;
};
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pins>;
-
- /*
- * SelLCDorHDMI, LOW to select HDMI. This is not really the
- * panel's enable GPIO, but we don't have HDMI driver support nor
- * support to switch between two displays, so using this gpio as
- * panel's enable should be safe.
- */
- enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
@@ -108,6 +106,38 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AM43-EPOS-EVM";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MIC1LP", "Microphone Jack",
+ "MIC1RP", "Microphone Jack",
+ "MIC1LP", "MICBIAS",
+ "MIC1RP", "MICBIAS",
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Speaker", "SPL",
+ "Speaker", "SPR";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-frequency = <12000000>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3111>;
+ system-clock-frequency = <12000000>;
+ };
+ };
};
&am43xx_pinmux {
@@ -278,7 +308,7 @@
>;
};
- lcd_pins: lcd_pins {
+ display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
@@ -320,6 +350,24 @@
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
+
+ mcasp1_pins: mcasp1_pins {
+ pinctrl-single,pins = <
+ 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+ 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+ >;
+ };
+
+ mcasp1_sleep_pins: mcasp1_sleep_pins {
+ pinctrl-single,pins = <
+ 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
};
&mmc1 {
@@ -399,6 +447,15 @@
regulator-always-on;
};
+ dcdc4: regulator-dcdc4 {
+ compatible = "ti,tps65218-dcdc4";
+ regulator-name = "vdcdc4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
@@ -441,6 +498,23 @@
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
+
+ tlv320aic3111: tlv320aic3111@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3111";
+ reg = <0x18>;
+ status = "okay";
+
+ ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+ /* Regulators */
+ HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+ SPRVDD-supply = <&vbat>; /* vbat */
+ SPLVDD-supply = <&vbat>; /* vbat */
+ AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+ };
};
&i2c2 {
@@ -458,7 +532,21 @@
};
&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_mux_pins>;
status = "okay";
+
+ p1 {
+ /*
+ * SelLCDorHDMI selects between display and audio paths:
+ * Low: HDMI display with audio via HDMI
+ * High: LCD display with analog audio via aic3111 codec
+ */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SelLCDorHDMI";
+ };
};
&gpio3 {
@@ -686,3 +774,21 @@
};
};
};
+
+&mcasp1 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp1_pins>;
+ pinctrl-1 = <&mcasp1_sleep_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index d0c0dfa4ec48..cc88728d751d 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -486,6 +486,15 @@
reg = <0x4238>;
};
+ dpll_clksel_mac_clk: dpll_clksel_mac_clk {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_core_m5_ck>;
+ reg = <0x4234>;
+ ti,bit-shift = <2>;
+ ti,dividers = <2>, <5>;
+ };
+
clk_32k_mosc_ck: clk_32k_mosc_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index f9a4b317ed2f..3a05b94f59ed 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -580,7 +580,6 @@
vmmc-supply = <&ldo1_reg>;
vmmc_aux-supply = <&vdd_3v3>;
- pbias-supply = <&pbias_mmc_reg>;
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 67a0ab0f71e0..e9a381741ce1 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -176,6 +176,10 @@
reg = <0x8000 0x1000>;
cache-unified;
cache-level = <2>;
+ arm,double-linefill-incr = <1>;
+ arm,double-linefill-wrap = <0>;
+ arm,double-linefill = <1>;
+ prefetch-data = <1>;
};
scu@c000 {
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd4f6fd8a2e8..353c92532e7a 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -81,10 +81,6 @@
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
- /*
- * The EEPROM located at adresse 54 is needed
- * for the boot - DO NOT ERASE IT -
- */
expander0: pca9555@20 {
compatible = "nxp,pca9555";
@@ -111,6 +107,10 @@
reg = <0x21>;
};
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
};
serial@12000 {
@@ -301,9 +301,11 @@
reg_sata0: pwr-sata0 {
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-always-on;
-
+ gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata0: v5-sata0 {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 04ecfe6e2bc6..f9f2347d9995 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -143,6 +143,10 @@
reg = <0x8000 0x1000>;
cache-unified;
cache-level = <2>;
+ arm,double-linefill-incr = <1>;
+ arm,double-linefill-wrap = <0>;
+ arm,double-linefill = <1>;
+ prefetch-data = <1>;
};
scu@c000 {
@@ -450,7 +454,7 @@
};
xor@60800 {
- compatible = "marvell,orion-xor";
+ compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
clocks = <&gateclk 22>;
@@ -470,7 +474,7 @@
};
xor@60900 {
- compatible = "marvell,orion-xor";
+ compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
clocks = <&gateclk 28>;
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index fc9864f85fc2..dc6efd386dbc 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -104,6 +104,10 @@
reg = <0x8000 0x1000>;
cache-unified;
cache-level = <2>;
+ arm,double-linefill-incr = <1>;
+ arm,double-linefill-wrap = <0>;
+ arm,double-linefill = <1>;
+ prefetch-data = <1>;
};
scu@c000 {
@@ -325,7 +329,7 @@
};
xor@60800 {
- compatible = "marvell,orion-xor";
+ compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
clocks = <&gateclk 22>;
@@ -345,7 +349,7 @@
};
xor@60900 {
- compatible = "marvell,orion-xor";
+ compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
clocks = <&gateclk 28>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000000..e8d63afdb135
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,134 @@
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+
+/ {
+ model = "Atmel SAMA5D2 Xplained";
+ compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x80000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ usb0: gadget@00300000 {
+ status = "okay";
+ };
+
+ usb1: ohci@00400000 {
+ num-ports = <3>;
+ status = "okay";
+ };
+
+ usb2: ehci@00500000 {
+ status = "okay";
+ };
+
+ apb {
+ spi0: spi@f8000000 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
+ macb0: ethernet@f8008000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ uart1: serial@f8020000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f8028000 {
+ dmas = <0>, <0>;
+ status = "okay";
+ };
+
+ uart3: serial@fc008000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@fc028000 {
+ dmas = <0>, <0>;
+ status = "okay";
+
+ at24@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 22ad7c959103..07f46963335b 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -131,6 +131,15 @@
};
adc0: adc@fc034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* external trigger conflicts with USBA_VBUS */
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
atmel,adc-vref = <3300>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index d782f2926b73..49a59c7e4a5d 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -100,6 +100,15 @@
};
adc0: adc@fc034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* external trigger conflicts with USBA_VBUS */
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
atmel,adc-vref = <3300>;
/*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e3cfb9972f54..60edd8baebb8 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -359,6 +359,7 @@
compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
reg = <0xfffffd00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
watchdog {
compatible = "atmel,at91rm9200-wdt";
@@ -369,6 +370,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
status = "disabled";
};
@@ -378,8 +380,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
tcb1: timer@fffa4000 {
@@ -388,8 +390,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
i2c0: i2c@fffb8000 {
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 4bc347549102..be9c027ddd97 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -359,11 +359,13 @@
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffd30 {
@@ -379,8 +381,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
tcb1: timer@fffdc000 {
@@ -389,8 +391,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
pinctrl@fffff400 {
@@ -973,6 +975,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index b2c44a07a3d0..ce1e3e94a40c 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -119,8 +119,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
<18 IRQ_TYPE_LEVEL_HIGH 0>,
<19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
usb1: gadget@fffa4000 {
@@ -820,11 +820,13 @@
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&slow_xtal>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
+ clocks = <&slow_xtal>;
};
pit: timer@fffffd30 {
@@ -846,6 +848,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966ef5e8..f1f5fa3a9e6e 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -377,18 +377,20 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb_clk>, <&slow_xtal>;
+ clock-names = "t0_clk", "slow_clk";
};
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&slow_xtal>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
+ clocks = <&slow_xtal>;
};
pinctrl@fffff200 {
@@ -902,6 +904,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&slow_xtal>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index cfd7044616d7..27de7dc0f0e0 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
/ {
model = "Atmel AT91SAM9G15 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 26b0444b0f96..d1d2b400f1c6 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -8,9 +8,34 @@
*/
/dts-v1/;
#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
#include "at91sam9x5ek.dtsi"
/ {
model = "Atmel AT91SAM9G15-EK";
compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ hlcdc: hlcdc@f8038000 {
+ status = "okay";
+ };
+ };
+ };
+
+ backlight: backlight {
+ status = "okay";
+ };
+
+ bl_reg: backlight_regulator {
+ status = "okay";
+ };
+
+ panel: panel {
+ status = "okay";
+ };
+
+ panel_reg: panel_regulator {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index e35c2fcf8298..ff4115886f97 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
#include "at91sam9x5_macb0.dtsi"
/ {
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 641a9bf89ed1..23ec8b13f30a 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -8,6 +8,7 @@
*/
/dts-v1/;
#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
#include "at91sam9x5ek.dtsi"
/ {
@@ -20,6 +21,26 @@
phy-mode = "rmii";
status = "okay";
};
+
+ hlcdc: hlcdc@f8038000 {
+ status = "okay";
+ };
};
};
+
+ backlight: backlight {
+ status = "okay";
+ };
+
+ bl_reg: backlight_regulator {
+ status = "okay";
+ };
+
+ panel: panel {
+ status = "okay";
+ };
+
+ panel_reg: panel_regulator {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18177f5a7464..18b8b9e29704 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -387,6 +387,7 @@
rstc@fffffd00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffd30 {
@@ -400,22 +401,23 @@
shdwc@fffffd10 {
compatible = "atmel,at91sam9rl-shdwc";
reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
dma: dma-controller@ffffec00 {
@@ -498,23 +500,31 @@
};
isi {
- pinctrl_isi: isi-0 {
- atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
- AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
- AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
- AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
- AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
- AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
- AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
- AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
- AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
- AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
- AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
- AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
- AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
- AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
- AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
- AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
+ atmel,pins =
+ <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+ AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+ AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+ AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+ AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+ AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+ AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+ AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+ AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+ AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+ };
+
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+ AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+ };
+
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
+ atmel,pins =
+ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+ AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
};
};
@@ -1067,9 +1077,11 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&isi_clk>;
clock-names = "isi_clk";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_isi>;
status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
pwm0: pwm@fffb8000 {
@@ -1113,6 +1125,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
@@ -1247,6 +1260,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffdb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d3362603..d1ae60a855d4 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -63,6 +63,25 @@
i2c0: i2c@fff84000 {
status = "okay";
+ ov2640: camera@30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
};
i2c1: i2c@fff88000 {
@@ -101,6 +120,22 @@
};
pinctrl@fffff200 {
+ camera_sensor {
+ pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
+ atmel,pins =
+ <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_sensor_power: sensor_power-0 {
+ atmel,pins =
+ <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
mmc0 {
pinctrl_board_mmc0: mmc0-board {
atmel,pins =
@@ -155,6 +190,18 @@
status = "okay";
};
+ isi@fffb4000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ status = "okay";
+ port {
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
pwm0: pwm@fffb8000 {
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 5c2a8c8c8bd4..32bc9a189db0 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -376,6 +376,7 @@
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffe30 {
@@ -388,6 +389,7 @@
shdwc@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k>;
};
sckc@fffffe50 {
@@ -431,16 +433,44 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ hlcdc: hlcdc@f8038000 {
+ compatible = "atmel,at91sam9n12-hlcdc";
+ reg = <0xf8038000 0x2000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk", "sys_clk", "slow_clk";
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
};
dma: dma-controller@ffffec00 {
@@ -475,6 +505,49 @@
};
};
+ lcd {
+ pinctrl_lcd_base: lcd-base-0 {
+ atmel,pins =
+ <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
+ AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
+ AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
+ AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
+ };
+
+ pinctrl_lcd_pwm: lcd-pwm-0 {
+ atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
+ };
+
+ pinctrl_lcd_rgb888: lcd-rgb-3 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ };
+
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
@@ -891,6 +964,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
@@ -901,6 +975,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index eab17fcace6d..efa75064d38a 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -128,6 +128,22 @@
};
};
+ hlcdc: hlcdc@f8038000 {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+
usb1: gadget@f803c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
@@ -161,6 +177,23 @@
};
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 50000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <&bl_reg>;
+ status = "okay";
+ };
+
+ bl_reg: backlight_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight-power-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
leds {
compatible = "gpio-leds";
@@ -194,6 +227,34 @@
};
};
+ panel: panel {
+ compatible = "qd,qd43003c0-40", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&panel_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ panel_reg: panel_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-power-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ status = "okay";
+ };
+
sound {
compatible = "atmel,asoc-wm8904";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index c9920c64791c..a0b90aedd3b8 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -121,8 +121,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
<17 IRQ_TYPE_LEVEL_HIGH 0>,
<18 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
- clock-names = "t0_clk", "t1_clk", "t2_clk";
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
mmc0: mmc@fffa4000 {
@@ -1018,11 +1018,13 @@
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffd30 {
@@ -1036,6 +1038,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
status = "disabled";
};
@@ -1083,6 +1086,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffe00 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 499cdc81f4c0..d9054e8167b7 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
*/
#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
#include "at91sam9x5_macb0.dtsi"
#include "at91sam9x5_can.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 343d32818ca3..fcb67180ea26 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -8,6 +8,7 @@
*/
/dts-v1/;
#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
#include "at91sam9x5ek.dtsi"
/ {
@@ -20,6 +21,25 @@
phy-mode = "rmii";
status = "okay";
};
+ hlcdc: hlcdc@f8038000 {
+ status = "okay";
+ };
};
};
+
+ backlight: backlight {
+ status = "okay";
+ };
+
+ bl_reg: backlight_regulator {
+ status = "okay";
+ };
+
+ panel: panel {
+ status = "okay";
+ };
+
+ panel_reg: panel_regulator {
+ status = "okay";
+ };
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index b6c8df8d380e..747d8f070a5c 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -376,11 +376,13 @@
rstc@fffffe00 {
compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k>;
};
shdwc@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffe30 {
@@ -418,16 +420,16 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
tcb1: timer@f800c000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
dma0: dma-controller@ffffec00 {
@@ -1173,6 +1175,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
@@ -1183,6 +1186,7 @@
compatible = "atmel,at91sam9x5-rtc";
reg = <0xfffffeb0 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 485302e8233d..1629db9dd563 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -13,6 +13,137 @@
/ {
ahb {
apb {
+ hlcdc: hlcdc@f8038000 {
+ compatible = "atmel,at91sam9x5-hlcdc";
+ reg = <0xf8038000 0x4000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
+
+ pinctrl@fffff400 {
+ lcd {
+ pinctrl_lcd_base: lcd-base-0 {
+ atmel,pins =
+ <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
+ AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
+ AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
+ AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
+ };
+
+ pinctrl_lcd_pwm: lcd-pwm-0 {
+ atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
+ };
+
+ pinctrl_lcd_rgb444: lcd-rgb-0 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
+ };
+
+ pinctrl_lcd_rgb565: lcd-rgb-1 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
+ };
+
+ pinctrl_lcd_rgb666: lcd-rgb-2 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */
+ };
+
+ pinctrl_lcd_rgb888: lcd-rgb-3 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
+ AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
+ AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
+ AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
+ AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
+ AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
+ AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
+ AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
+ AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
+ AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
+ AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
+ AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
+ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+ };
+ };
+ };
+
pmc: pmc@fffffc00 {
periphck {
lcdc_clk: lcdc_clk {
@@ -20,6 +151,14 @@
reg = <25>;
};
};
+
+ systemck {
+ lcdck: lcdck {
+ #clock-cells = <0>;
+ reg = <3>;
+ clocks = <&mck>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000000..34c089fe0bc0
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,101 @@
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ ahb {
+ apb {
+ i2c0: i2c@f8010000 {
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioA>;
+ interrupts = <7 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+ };
+
+ hlcdc: hlcdc@f8038000 {
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+
+ adc0: adc@f804c000 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ board {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 50000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <&bl_reg>;
+ status = "disabled";
+ };
+
+ bl_reg: backlight_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight-power-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "disabled";
+ };
+
+ panel: panel {
+ compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&panel_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ panel_reg: panel_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-power-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
index 49cf59a95572..1e9cd1a8508e 100644
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ b/arch/arm/boot/dts/atlas7-evb.dts
@@ -10,6 +10,9 @@
/include/ "atlas7.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "CSR SiRFatlas7 Evaluation Board";
compatible = "sirf,atlas7-cb", "sirf,atlas7";
@@ -106,5 +109,20 @@
};
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rearview_key {
+ label = "rearview key";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
+ debounce_interval = <100>;
+ };
+ };
+
};
};
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 3e21311f9514..83449b33de6b 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -21,6 +21,10 @@
serial5 = &uart5;
serial6 = &uart6;
serial9 = &usp2;
+ spi1 = &spi1;
+ spi2 = &usp1;
+ spi3 = &usp2;
+ spi4 = &usp3;
};
cpus {
#address-cells = <1>;
@@ -53,6 +57,11 @@
};
};
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <0 29 4>, <0 82 4>;
+ };
+
noc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -1205,7 +1214,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x18641000 0x18641000 0x3000>,
- <0x18620000 0x18620000 0x1000>;
+ <0x18620000 0x18620000 0x1000>,
+ <0x18630000 0x18630000 0x10000>;
cgum@18641000 {
compatible = "sirf,nocfw-cgum";
@@ -1218,6 +1228,15 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+ pwm: pwm@18630000 {
+ compatible = "sirf,prima2-pwm";
+ #pwm-cells = <2>;
+ reg = <0x18630000 0x10000>;
+ clocks = <&car 138>, <&car 139>, <&car 237>,
+ <&car 240>, <&car 140>, <&car 246>;
+ clock-names = "pwmc", "sigsrc0", "sigsrc1",
+ "sigsrc2", "sigsrc3", "sigsrc4";
+ };
};
gnssm {
@@ -1231,6 +1250,7 @@
<0x18040000 0x18040000 0x1000>,
<0x18050000 0x18050000 0x1000>,
<0x18060000 0x18060000 0x1000>,
+ <0x180b0000 0x180b0000 0x4000>,
<0x18100000 0x18100000 0x3000>,
<0x18250000 0x18250000 0x10000>,
<0x18200000 0x18200000 0x1000>;
@@ -1314,6 +1334,18 @@
dma-names = "rx", "tx";
status = "disabled";
};
+ gmac: eth@180b0000 {
+ compatible = "snps, dwc-eth-qos";
+ reg = <0x180b0000 0x4000>;
+ interrupts = <0 59 0>, <0 70 0>;
+ interrupt-names = "macirq", "macpmt";
+ clocks = <&car 39>, <&car 45>,
+ <&car 86>, <&car 87>;
+ clock-names = "gnssm_rgmii", "gnssm_gmac",
+ "rgmii", "gmac";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-mode = "rgmii";
+ };
dspub@18250000 {
compatible = "dx,cc44p";
reg = <0x18250000 0x10000>;
@@ -1338,18 +1370,51 @@
compatible = "arteris, flexnoc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x13000000 0x13000000 0x3000>;
+ ranges = <0x13000000 0x13000000 0x3000>,
+ <0x13010000 0x13010000 0x1400>,
+ <0x13010800 0x13010800 0x100>,
+ <0x13011000 0x13011000 0x100>;
gpum@0x13000000 {
compatible = "sirf,nocfw-gpum";
reg = <0x13000000 0x3000>;
};
+ dmacsdrr: dma-controller@13010800 {
+ cell-index = <5>;
+ compatible = "sirf,atlas7-dmac-v2";
+ reg = <0x13010800 0x100>;
+ interrupts = <0 8 0>;
+ clocks = <&car 127>;
+ #dma-cells = <1>;
+ #dma-channels = <1>;
+ };
+ dmacsdrw: dma-controller@13011000 {
+ cell-index = <6>;
+ compatible = "sirf,atlas7-dmac-v2";
+ reg = <0x13011000 0x100>;
+ interrupts = <0 9 0>;
+ clocks = <&car 127>;
+ #dma-cells = <1>;
+ #dma-channels = <1>;
+ };
+ sdr@0x13010000 {
+ compatible = "sirf,atlas7-sdr";
+ reg = <0x13010000 0x1400>;
+ interrupts = <0 7 0>,
+ <0 8 0>,
+ <0 9 0>;
+ clocks = <&car 127>;
+ dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
+ dma-names = "tx", "rx";
+ };
};
mediam {
compatible = "arteris, flexnoc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x16000000 0x16000000 0x00200000>,
+ ranges = <0x15000000 0x15000000 0x00600000>,
+ <0x16000000 0x16000000 0x00200000>,
+ <0x17000000 0x17000000 0x10000>,
<0x17020000 0x17020000 0x1000>,
<0x17030000 0x17030000 0x1000>,
<0x17040000 0x17040000 0x1000>,
@@ -1360,6 +1425,13 @@
<0x17070200 0x17070200 0x100>,
<0x170A0000 0x170A0000 0x3000>;
+ multimedia@15000000 {
+ compatible = "sirf,atlas7-video-codec";
+ reg = <0x15000000 0x10000>;
+ interrupts = <0 5 0>;
+ clocks = <&car 102>;
+ };
+
mediam@170A0000 {
compatible = "sirf,nocfw-mediam";
reg = <0x170A0000 0x3000>;
@@ -1386,6 +1458,8 @@
nand@17050000 {
compatible = "sirf,atlas7-nand";
reg = <0x17050000 0x10000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&nd_df_pmx>;
interrupts = <0 41 0>;
clocks = <&car 108>, <&car 112>;
clock-names = "nand_io", "nand_nand";
@@ -1416,6 +1490,14 @@
bus-width = <8>;
};
+ jpeg@17000000 {
+ compatible = "sirf,atlas7-jpeg";
+ reg = <0x17000000 0x10000>;
+ interrupts = <0 72 0>,
+ <0 73 0>;
+ clocks = <&car 103>;
+ };
+
usb0: usb@17060000 {
cell-index = <0>;
compatible = "sirf,atlas7-usb";
@@ -1826,7 +1908,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x13100000 0x13100000 0x20000>,
- <0x10e10000 0x10e10000 0x10000>;
+ <0x10e10000 0x10e10000 0x10000>,
+ <0x17010000 0x17010000 0x10000>;
lcd@13100000 {
compatible = "sirf,atlas7-lcdc";
@@ -1848,6 +1931,12 @@
clocks = <&car 54>;
resets = <&car 29>;
};
+ g2d@17010000 {
+ compatible = "sirf, atlas7-g2d";
+ reg = <0x17010000 0x10000>;
+ interrupts = <0 61 0>;
+ clocks = <&car 104>;
+ };
};
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
new file mode 100644
index 000000000000..f90ad6c64a07
--- /dev/null
+++ b/arch/arm/boot/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+ compatible = "x-powers,axp152";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 60d8389fdb6c..32bcd45ef22b 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -36,56 +36,89 @@ clocks {
ranges;
osc: oscillator {
+ #clock-cells = <0>;
compatible = "fixed-clock";
- #clock-cells = <1>;
clock-frequency = <25000000>;
};
- apb_clk: apb_clk {
- compatible = "fixed-clock";
+ /* Cygnus ARM PLL */
+ armpll: armpll {
#clock-cells = <0>;
- clock-frequency = <1000000000>;
+ compatible = "brcm,cygnus-armpll";
+ clocks = <&osc>;
+ reg = <0x19000000 0x1000>;
};
- periph_clk: periph_clk {
- compatible = "fixed-clock";
+ /* peripheral clock for system timer */
+ periph_clk: arm_periph_clk {
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
- sdio_clk: lcpll_ch2 {
- compatible = "fixed-clock";
+ /* APB bus clock */
+ apb_clk: apb_clk {
#clock-cells = <0>;
- clock-frequency = <200000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
- axi81_clk: axi81_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
+ genpll: genpll {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
};
- keypad_clk: keypad_clk {
- compatible = "fixed-clock";
+ /* always 1/2 of the axi21 clock */
+ axi41_clk: axi41_clk {
#clock-cells = <0>;
- clock-frequency = <31806>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll 1>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
- adc_clk: adc_clk {
- compatible = "fixed-clock";
+ /* always 1/4 of the axi21 clock */
+ axi81_clk: axi81_clk {
#clock-cells = <0>;
- clock-frequency = <1562500>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll 1>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
- pwm_clk: pwm_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
+ lcpll0: lcpll0 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-lcpll0";
+ reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+ "usb_phy", "smart_card", "ch5";
};
- lcd_clk: mipipll_ch1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
+ mipipll: mipipll {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-mipipll";
+ reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+ "ch2_v3d", "ch3_unused", "ch4_unused",
+ "ch5_unused";
+ };
+
+ asiu_clks: asiu_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+ clocks = <&osc>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 46780bb48bbf..ab5474e5d1c8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,13 @@
linux,default-trigger = "heartbeat";
};
};
+
+ soc {
+ firmware: firmware {
+ compatible = "raspberrypi,bcm2835-firmware";
+ mboxes = <&mailbox>;
+ };
+ };
};
&gpio {
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 24f0ab59bf1b..42dcdfb769b2 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -135,3 +135,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index f03939311717..f18e80e0b61d 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -55,3 +55,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 326ce8f4e49c..64b8d10ccff8 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -24,16 +24,6 @@
reg = <0x00000000 0x08000000>;
};
- chipcommonA {
- uart0: serial@0300 {
- status = "okay";
- };
-
- uart1: serial@0400 {
- status = "okay";
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -92,3 +82,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index d6a033b97c70..64a5e8ab65e0 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -118,3 +118,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index bb0cb0bfafaf..38f0c00d1aca 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -122,3 +122,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 21fefd4cdc25..6f50f672efbd 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -78,10 +78,20 @@
compatible = "arm,pl310-cache";
reg = <0x2000 0x1000>;
cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
cache-level = <2>;
};
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts =
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..3b6b17560687 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -109,6 +109,20 @@
brcm,int-fwd-mask = <0x70000>;
};
+ irq0_aon_intc: interrupt-controller@417280 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x417280 0x8>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 0x46 0x0>,
+ <GIC_SPI 0x44 0x0>,
+ <GIC_SPI 0x49 0x0>;
+ brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+ brcm,int-fwd-mask = <0x0>;
+ brcm,irq-can-wake;
+ };
+
hif_intr2_intc: interrupt-controller@3e1000 {
compatible = "brcm,l2-intc";
reg = <0x3e1000 0x30>;
@@ -119,6 +133,16 @@
interrupt-names = "hif";
};
+ aon_pm_l2_intc: interrupt-controller@410640 {
+ compatible = "brcm,l2-intc";
+ reg = <0x410640 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 0x40 0x0>;
+ interrupt-parent = <&gic>;
+ brcm,irq-can-wake;
+ };
+
nand: nand@3e2800 {
status = "disabled";
#address-cells = <1>;
@@ -167,6 +191,32 @@
#phy-cells = <0>;
};
};
+
+ upg_gio: gpio@40a700 {
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ reg = <0x40a700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 24>;
+ };
+
+ upg_gio_aon: gpio@4172c0 {
+ compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+ reg = <0x4172c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts-extended = <&irq0_aon_intc 0x6>,
+ <&aon_pm_l2_intc 0x5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
};
smpboot {
diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000000..71f5c5ecce46
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index af333261d046..df4c6f1f93f9 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -88,6 +88,13 @@
interrupts = <25>;
};
+ watchdog@f0000fc0 {
+ compatible = "cnxt,cx92755-wdt";
+ reg = <0xf0000fc0 0x8>;
+ clocks = <&main_clk>;
+ timeout-sec = <15>;
+ };
+
uc_regs: syscon@f00003a0 {
compatible = "cnxt,cx92755-uc", "syscon";
reg = <0xf00003a0 0x10>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index 90d52cc416dc..5da00806c41e 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -64,8 +64,7 @@
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
new file mode 100644
index 000000000000..92bacd3c8fab
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+ model = "DM8148 EVM";
+ compatible = "ti,dm8148-evm", "ti,dm8148";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
new file mode 100644
index 000000000000..8c4bbc7573df
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+ model = "DM8148 EVM";
+ compatible = "hp,t410", "ti,dm8148";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
new file mode 100644
index 000000000000..ef1e8e7a6cc6
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -0,0 +1,109 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scm_clocks {
+
+ tclkin_ck: tclkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ devosc_ck: devosc_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
+ auxosc_ck: auxosc_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ };
+
+ mpu_ck: mpu_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1000000000>;
+ };
+
+ sysclk4_ck: sysclk4_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <222000000>;
+ };
+
+ sysclk6_ck: sysclk6_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ sysclk10_ck: sysclk10_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
+
+ sysclk18_ck: sysclk18_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ };
+
+ cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <250000000>;
+ };
+
+};
+
+&pllss_clocks {
+
+ aud_clkin0_ck: aud_clkin0_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ aud_clkin1_ck: aud_clkin1_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ aud_clkin2_ck: aud_clkin2_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <20000000>;
+ };
+
+ timer1_mux_ck: timer1_mux_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <3>;
+ reg = <0x2e0>;
+ };
+
+ timer2_mux_ck: timer2_mux_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+ &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+ ti,bit-shift = <6>;
+ reg = <0x2e0>;
+ };
+};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
new file mode 100644
index 000000000000..972c9c9e885b
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -0,0 +1,333 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "ti,dm814";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ ethernet0 = &cpsw_emac0;
+ ethernet1 = &cpsw_emac1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ /*
+ * See TRM "Table 1-317. L4LS Instance Summary", just deduct
+ * 0x1000 from the 1-317 addresses to get the device address
+ */
+ l4ls: l4ls@48000000 {
+ compatible = "ti,dm814-l4ls", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x2000000>;
+
+ i2c1: i2c@28000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ reg = <0x28000 0x1000>;
+ interrupts = <70>;
+ };
+
+ elm: elm@80000 {
+ compatible = "ti,814-elm";
+ ti,hwmods = "elm";
+ reg = <0x80000 0x2000>;
+ interrupts = <4>;
+ };
+
+ gpio1: gpio@32000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ reg = <0x32000 0x2000>;
+ interrupts = <96>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@4c000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ reg = <0x4c000 0x2000>;
+ interrupts = <98>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c2: i2c@2a000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ reg = <0x2a000 0x1000>;
+ interrupts = <71>;
+ };
+
+ mcspi1: spi@30000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x30000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <65>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi1";
+ dmas = <&edma 16 &edma 17
+ &edma 18 &edma 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ timer1: timer@2e000 {
+ compatible = "ti,dm814-timer";
+ reg = <0x2e000 0x2000>;
+ interrupts = <67>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ uart1: uart@20000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ reg = <0x20000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <72>;
+ dmas = <&edma 26 &edma 27>;
+ dma-names = "tx", "rx";
+ };
+
+ uart2: uart@22000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ reg = <0x22000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <73>;
+ dmas = <&edma 28 &edma 29>;
+ dma-names = "tx", "rx";
+ };
+
+ uart3: uart@24000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ reg = <0x24000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <74>;
+ dmas = <&edma 30 &edma 31>;
+ dma-names = "tx", "rx";
+ };
+
+ timer2: timer@40000 {
+ compatible = "ti,dm814-timer";
+ reg = <0x40000 0x2000>;
+ interrupts = <68>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@42000 {
+ compatible = "ti,dm814-timer";
+ reg = <0x42000 0x2000>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ control: control@160000 {
+ compatible = "ti,dm814-scm", "simple-bus";
+ reg = <0x160000 0x16d000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x160000 0x16d000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+ };
+
+ pincntl: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0xc38>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x300ff>;
+ };
+ };
+
+ prcm: prcm@180000 {
+ compatible = "ti,dm814-prcm", "simple-bus";
+ reg = <0x180000 0x4000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ pllss: pllss@1c5000 {
+ compatible = "ti,dm814-pllss", "simple-bus";
+ reg = <0x1c5000 0x2000>;
+
+ pllss_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pllss_clockdomains: clockdomains {
+ };
+ };
+
+ wdt1: wdt@1c7000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer";
+ reg = <0x1c7000 0x1000>;
+ interrupts = <91>;
+ };
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,dm814-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ edma: edma@49000000 {
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ reg = <0x49000000 0x10000>,
+ <0x44e10f90 0x40>;
+ interrupts = <12 13 14>;
+ #dma-cells = <1>;
+ };
+
+ /* See TRM "Table 1-318. L4HS Instance Summary" */
+ l4hs: l4hs@4a000000 {
+ compatible = "ti,dm814-l4hs", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x1b4040>;
+ };
+
+ /* REVISIT: Move to live under l4hs once driver is fixed */
+ mac: ethernet@4a100000 {
+ compatible = "ti,cpsw";
+ ti,hwmods = "cpgmac0";
+ clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ no_bd_ram = <0>;
+ rx_descs = <64>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0x4a100000 0x800
+ 0x4a100900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ /*
+ * c0_rx_thresh_pend
+ * c0_rx_pend
+ * c0_tx_pend
+ * c0_misc_pend
+ */
+ interrupts = <40 41 42 43>;
+ ranges;
+ syscon = <&scm_conf>;
+
+ davinci_mdio: mdio@4a100800 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ reg = <0x4a100800 0x100>;
+ };
+
+ cpsw_emac0: slave@4a100200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpsw_emac1: slave@4a100300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ phy_sel: cpsw-phy-sel@0x48160650 {
+ compatible = "ti,am3352-cpsw-phy-sel";
+ reg= <0x48160650 0x4>;
+ reg-names = "gmii-sel";
+ };
+ };
+ };
+};
+
+#include "dm814x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 289806adb343..3c99cfa1a876 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -58,7 +58,7 @@
* the whole bus hierarchy.
*/
ocp {
- compatible = "ti,omap3-l3-smx", "simple-bus";
+ compatible = "simple-bus";
reg = <0x44000000 0x10000>;
interrupts = <9 10>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 38b1f7e6004e..179121630ad7 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -419,293 +419,325 @@
status = "disabled";
};
- thermal: thermal-diode@d001c {
- compatible = "marvell,dove-thermal";
- reg = <0xd001c 0x0c>, <0xd005c 0x08>;
- };
-
- gate_clk: clock-gating-ctrl@d0038 {
- compatible = "marvell,dove-gating-clock";
- reg = <0xd0038 0x4>;
- clocks = <&core_clk 0>;
- #clock-cells = <1>;
- };
-
- pinctrl: pin-ctrl@d0200 {
- compatible = "marvell,dove-pinctrl";
- reg = <0xd0200 0x14>,
- <0xd0440 0x04>;
- clocks = <&gate_clk 22>;
-
- pmx_gpio_0: pmx-gpio-0 {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
-
- pmx_gpio_1: pmx-gpio-1 {
- marvell,pins = "mpp1";
- marvell,function = "gpio";
- };
-
- pmx_gpio_2: pmx-gpio-2 {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_gpio_3: pmx-gpio-3 {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_gpio_4: pmx-gpio-4 {
- marvell,pins = "mpp4";
- marvell,function = "gpio";
- };
-
- pmx_gpio_5: pmx-gpio-5 {
- marvell,pins = "mpp5";
- marvell,function = "gpio";
- };
-
- pmx_gpio_6: pmx-gpio-6 {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- pmx_gpio_7: pmx-gpio-7 {
- marvell,pins = "mpp7";
- marvell,function = "gpio";
- };
-
- pmx_gpio_8: pmx-gpio-8 {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- pmx_gpio_9: pmx-gpio-9 {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- pmx_pcie1_clkreq: pmx-pcie1-clkreq {
- marvell,pins = "mpp9";
- marvell,function = "pex1";
- };
-
- pmx_gpio_10: pmx-gpio-10 {
- marvell,pins = "mpp10";
- marvell,function = "gpio";
- };
-
- pmx_gpio_11: pmx-gpio-11 {
- marvell,pins = "mpp11";
- marvell,function = "gpio";
- };
-
- pmx_pcie0_clkreq: pmx-pcie0-clkreq {
- marvell,pins = "mpp11";
- marvell,function = "pex0";
- };
-
- pmx_gpio_12: pmx-gpio-12 {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_gpio_13: pmx-gpio-13 {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_audio1_extclk: pmx-audio1-extclk {
- marvell,pins = "mpp13";
- marvell,function = "audio1";
- };
-
- pmx_gpio_14: pmx-gpio-14 {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_gpio_15: pmx-gpio-15 {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_gpio_16: pmx-gpio-16 {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_gpio_17: pmx-gpio-17 {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_gpio_18: pmx-gpio-18 {
- marvell,pins = "mpp18";
- marvell,function = "gpio";
- };
-
- pmx_gpio_19: pmx-gpio-19 {
- marvell,pins = "mpp19";
- marvell,function = "gpio";
- };
-
- pmx_gpio_20: pmx-gpio-20 {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
-
- pmx_gpio_21: pmx-gpio-21 {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_camera: pmx-camera {
- marvell,pins = "mpp_camera";
- marvell,function = "camera";
- };
-
- pmx_camera_gpio: pmx-camera-gpio {
- marvell,pins = "mpp_camera";
- marvell,function = "gpio";
- };
-
- pmx_sdio0: pmx-sdio0 {
- marvell,pins = "mpp_sdio0";
- marvell,function = "sdio0";
- };
-
- pmx_sdio0_gpio: pmx-sdio0-gpio {
- marvell,pins = "mpp_sdio0";
- marvell,function = "gpio";
- };
-
- pmx_sdio1: pmx-sdio1 {
- marvell,pins = "mpp_sdio1";
- marvell,function = "sdio1";
- };
-
- pmx_sdio1_gpio: pmx-sdio1-gpio {
- marvell,pins = "mpp_sdio1";
- marvell,function = "gpio";
- };
-
- pmx_audio1_gpio: pmx-audio1-gpio {
- marvell,pins = "mpp_audio1";
- marvell,function = "gpio";
- };
-
- pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
- marvell,pins = "mpp_audio1";
- marvell,function = "i2s1/spdifo";
- };
-
- pmx_spi0: pmx-spi0 {
- marvell,pins = "mpp_spi0";
- marvell,function = "spi0";
- };
-
- pmx_spi0_gpio: pmx-spi0-gpio {
- marvell,pins = "mpp_spi0";
- marvell,function = "gpio";
- };
-
- pmx_spi1_4_7: pmx-spi1-4-7 {
- marvell,pins = "mpp4", "mpp5",
- "mpp6", "mpp7";
- marvell,function = "spi1";
- };
-
- pmx_spi1_20_23: pmx-spi1-20-23 {
- marvell,pins = "mpp20", "mpp21",
- "mpp22", "mpp23";
- marvell,function = "spi1";
- };
-
- pmx_uart1: pmx-uart1 {
- marvell,pins = "mpp_uart1";
- marvell,function = "uart1";
- };
-
- pmx_uart1_gpio: pmx-uart1-gpio {
- marvell,pins = "mpp_uart1";
- marvell,function = "gpio";
- };
-
- pmx_nand: pmx-nand {
- marvell,pins = "mpp_nand";
- marvell,function = "nand";
- };
-
- pmx_nand_gpo: pmx-nand-gpo {
- marvell,pins = "mpp_nand";
- marvell,function = "gpo";
- };
-
- pmx_i2c1: pmx-i2c1 {
- marvell,pins = "mpp17", "mpp19";
- marvell,function = "twsi";
- };
-
- pmx_i2c2: pmx-i2c2 {
- marvell,pins = "mpp_audio1";
- marvell,function = "twsi";
- };
-
- pmx_ssp_i2c2: pmx-ssp-i2c2 {
- marvell,pins = "mpp_audio1";
- marvell,function = "ssp/twsi";
- };
-
- pmx_i2cmux_0: pmx-i2cmux-0 {
- marvell,pins = "twsi";
- marvell,function = "twsi-opt1";
- };
-
- pmx_i2cmux_1: pmx-i2cmux-1 {
- marvell,pins = "twsi";
- marvell,function = "twsi-opt2";
- };
-
- pmx_i2cmux_2: pmx-i2cmux-2 {
- marvell,pins = "twsi";
- marvell,function = "twsi-opt3";
- };
- };
-
- core_clk: core-clocks@d0214 {
- compatible = "marvell,dove-core-clock";
- reg = <0xd0214 0x4>;
- #clock-cells = <1>;
- };
-
- gpio0: gpio-ctrl@d0400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0400 0x20>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <12>, <13>, <14>, <60>;
- };
-
- gpio1: gpio-ctrl@d0420 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0420 0x20>;
- ngpios = <32>;
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu", "simple-bus";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ ranges = <0x00000000 0x000d0000 0x8000
+ 0x00008000 0x000d8000 0x8000>;
+ interrupts = <33>;
interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <61>;
- };
-
- rtc: real-time-clock@d8500 {
- compatible = "marvell,orion-rtc";
- reg = <0xd8500 0x20>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+
+ thermal: thermal-diode@001c {
+ compatible = "marvell,dove-thermal";
+ reg = <0x001c 0x0c>, <0x005c 0x08>;
+ };
+
+ gate_clk: clock-gating-ctrl@0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0x0038 0x4>;
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ pinctrl: pin-ctrl@0200 {
+ compatible = "marvell,dove-pinctrl";
+ reg = <0x0200 0x14>,
+ <0x0440 0x04>;
+ clocks = <&gate_clk 22>;
+
+ pmx_gpio_0: pmx-gpio-0 {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_1: pmx-gpio-1 {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_2: pmx-gpio-2 {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_3: pmx-gpio-3 {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_4: pmx-gpio-4 {
+ marvell,pins = "mpp4";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_5: pmx-gpio-5 {
+ marvell,pins = "mpp5";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_6: pmx-gpio-6 {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_7: pmx-gpio-7 {
+ marvell,pins = "mpp7";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_8: pmx-gpio-8 {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_9: pmx-gpio-9 {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+ marvell,pins = "mpp9";
+ marvell,function = "pex1";
+ };
+
+ pmx_gpio_10: pmx-gpio-10 {
+ marvell,pins = "mpp10";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_11: pmx-gpio-11 {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+
+ pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+ marvell,pins = "mpp11";
+ marvell,function = "pex0";
+ };
+
+ pmx_gpio_12: pmx-gpio-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_13: pmx-gpio-13 {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_audio1_extclk: pmx-audio1-extclk {
+ marvell,pins = "mpp13";
+ marvell,function = "audio1";
+ };
+
+ pmx_gpio_14: pmx-gpio-14 {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_15: pmx-gpio-15 {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_16: pmx-gpio-16 {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_17: pmx-gpio-17 {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_18: pmx-gpio-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_19: pmx-gpio-19 {
+ marvell,pins = "mpp19";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_20: pmx-gpio-20 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+
+ pmx_gpio_21: pmx-gpio-21 {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_camera: pmx-camera {
+ marvell,pins = "mpp_camera";
+ marvell,function = "camera";
+ };
+
+ pmx_camera_gpio: pmx-camera-gpio {
+ marvell,pins = "mpp_camera";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio0: pmx-sdio0 {
+ marvell,pins = "mpp_sdio0";
+ marvell,function = "sdio0";
+ };
+
+ pmx_sdio0_gpio: pmx-sdio0-gpio {
+ marvell,pins = "mpp_sdio0";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio1: pmx-sdio1 {
+ marvell,pins = "mpp_sdio1";
+ marvell,function = "sdio1";
+ };
+
+ pmx_sdio1_gpio: pmx-sdio1-gpio {
+ marvell,pins = "mpp_sdio1";
+ marvell,function = "gpio";
+ };
+
+ pmx_audio1_gpio: pmx-audio1-gpio {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "gpio";
+ };
+
+ pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "i2s1/spdifo";
+ };
+
+ pmx_spi0: pmx-spi0 {
+ marvell,pins = "mpp_spi0";
+ marvell,function = "spi0";
+ };
+
+ pmx_spi0_gpio: pmx-spi0-gpio {
+ marvell,pins = "mpp_spi0";
+ marvell,function = "gpio";
+ };
+
+ pmx_spi1_4_7: pmx-spi1-4-7 {
+ marvell,pins = "mpp4", "mpp5",
+ "mpp6", "mpp7";
+ marvell,function = "spi1";
+ };
+
+ pmx_spi1_20_23: pmx-spi1-20-23 {
+ marvell,pins = "mpp20", "mpp21",
+ "mpp22", "mpp23";
+ marvell,function = "spi1";
+ };
+
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp_uart1";
+ marvell,function = "uart1";
+ };
+
+ pmx_uart1_gpio: pmx-uart1-gpio {
+ marvell,pins = "mpp_uart1";
+ marvell,function = "gpio";
+ };
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp_nand";
+ marvell,function = "nand";
+ };
+
+ pmx_nand_gpo: pmx-nand-gpo {
+ marvell,pins = "mpp_nand";
+ marvell,function = "gpo";
+ };
+
+ pmx_i2c1: pmx-i2c1 {
+ marvell,pins = "mpp17", "mpp19";
+ marvell,function = "twsi";
+ };
+
+ pmx_i2c2: pmx-i2c2 {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "twsi";
+ };
+
+ pmx_ssp_i2c2: pmx-ssp-i2c2 {
+ marvell,pins = "mpp_audio1";
+ marvell,function = "ssp/twsi";
+ };
+
+ pmx_i2cmux_0: pmx-i2cmux-0 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt1";
+ };
+
+ pmx_i2cmux_1: pmx-i2cmux-1 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt2";
+ };
+
+ pmx_i2cmux_2: pmx-i2cmux-2 {
+ marvell,pins = "twsi";
+ marvell,function = "twsi-opt3";
+ };
+ };
+
+ core_clk: core-clocks@0214 {
+ compatible = "marvell,dove-core-clock";
+ reg = <0x0214 0x4>;
+ #clock-cells = <1>;
+ };
+
+ gpio0: gpio-ctrl@0400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x0400 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <12>, <13>, <14>, <60>;
+ };
+
+ gpio1: gpio-ctrl@0420 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x0420 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <61>;
+ };
+
+ rtc: real-time-clock@8500 {
+ compatible = "marvell,orion-rtc";
+ reg = <0x8500 0x20>;
+ interrupts = <5>;
+ };
};
gconf: global-config@e802c {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 096f68be99e2..a6c82e5b64fe 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -19,6 +19,15 @@
reg = <0x80000000 0x60000000>; /* 1536 MB */
};
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
mmc2_3v3: fixedregulator-mmc2 {
compatible = "regulator-fixed";
regulator-name = "mmc2_3v3";
@@ -349,6 +358,7 @@
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -462,8 +472,14 @@
&mmc1 {
status = "okay";
- vmmc-supply = <&ldo1_reg>;
+ vmmc-supply = <&evm_3v3_sd>;
+ vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is always hardwired.
+ */
+ cd-gpios = <&gpio6 27 0>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index b058b3146874..a0d3d4bfe9cb 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -141,7 +141,7 @@
dra7_pmx_core: pinmux@1400 {
compatible = "ti,dra7-padconf",
"pinctrl-single";
- reg = <0x1400 0x0464>;
+ reg = <0x1400 0x0468>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
@@ -149,6 +149,11 @@
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x3fffffff>;
};
+
+ scm_conf1: scm_conf@1c04 {
+ compatible = "syscon";
+ reg = <0x1c04 0x0020>;
+ };
};
cm_core_aon: cm_core_aon@5000 {
@@ -286,16 +291,6 @@
#thermal-sensor-cells = <1>;
};
- dra7_ctrl_core: ctrl_core@4a002000 {
- compatible = "syscon";
- reg = <0x4a002000 0x6d0>;
- };
-
- dra7_ctrl_general: tisyscon@4a002e00 {
- compatible = "syscon";
- reg = <0x4a002e00 0x7c>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
@@ -308,6 +303,15 @@
dma-requests = <127>;
};
+ sdma_xbar: dma-router@4a002b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0x4a002b78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
+
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
@@ -403,7 +407,7 @@
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 49>, <&sdma 50>;
+ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
dma-names = "tx", "rx";
};
@@ -414,7 +418,7 @@
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 51>, <&sdma 52>;
+ dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
dma-names = "tx", "rx";
};
@@ -425,7 +429,7 @@
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 53>, <&sdma 54>;
+ dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
dma-names = "tx", "rx";
};
@@ -436,7 +440,7 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 55>, <&sdma 56>;
+ dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
dma-names = "tx", "rx";
};
@@ -447,7 +451,7 @@
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 63>, <&sdma 64>;
+ dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
dma-names = "tx", "rx";
};
@@ -458,7 +462,7 @@
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
- dmas = <&sdma 79>, <&sdma 80>;
+ dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
dma-names = "tx", "rx";
};
@@ -867,7 +871,7 @@
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
- dmas = <&sdma 61>, <&sdma 62>;
+ dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
@@ -879,7 +883,7 @@
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&sdma 47>, <&sdma 48>;
+ dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -890,7 +894,7 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
- dmas = <&sdma 77>, <&sdma 78>;
+ dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -901,7 +905,7 @@
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
- dmas = <&sdma 57>, <&sdma 58>;
+ dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -1046,14 +1050,14 @@
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
- dmas = <&sdma 35>,
- <&sdma 36>,
- <&sdma 37>,
- <&sdma 38>,
- <&sdma 39>,
- <&sdma 40>,
- <&sdma 41>,
- <&sdma 42>;
+ dmas = <&sdma_xbar 35>,
+ <&sdma_xbar 36>,
+ <&sdma_xbar 37>,
+ <&sdma_xbar 38>,
+ <&sdma_xbar 39>,
+ <&sdma_xbar 40>,
+ <&sdma_xbar 41>,
+ <&sdma_xbar 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
status = "disabled";
@@ -1067,10 +1071,10 @@
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
- dmas = <&sdma 43>,
- <&sdma 44>,
- <&sdma 45>,
- <&sdma 46>;
+ dmas = <&sdma_xbar 43>,
+ <&sdma_xbar 44>,
+ <&sdma_xbar 45>,
+ <&sdma_xbar 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -1083,7 +1087,7 @@
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
- dmas = <&sdma 15>, <&sdma 16>;
+ dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
dma-names = "tx0", "rx0";
status = "disabled";
};
@@ -1096,7 +1100,7 @@
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
- dmas = <&sdma 70>, <&sdma 71>;
+ dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
dma-names = "tx0", "rx0";
status = "disabled";
};
@@ -1296,7 +1300,12 @@
usb1: usb@48890000 {
compatible = "snps,dwc3";
reg = <0x48890000 0x17000>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
@@ -1319,7 +1328,12 @@
usb2: usb@488d0000 {
compatible = "snps,dwc3";
reg = <0x488d0000 0x17000>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
tx-fifo-resize;
@@ -1344,7 +1358,12 @@
usb3: usb@48910000 {
compatible = "snps,dwc3";
reg = <0x48910000 0x17000>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 803738414086..6f6bd98c98df 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -30,6 +30,15 @@
regulator-max-microvolt = <3300000>;
};
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
@@ -286,6 +295,7 @@
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -343,6 +353,12 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ cpsw_sel_s0 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
};
};
@@ -491,14 +507,15 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
-
- vmmc-supply = <&ldo1_reg>;
+ vmmc-supply = <&evm_3v3_sd>;
+ vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
cd-gpios = <&gpio6 27 0>;
+ max-frequency = <192000000>;
};
&mmc2 {
@@ -510,6 +527,7 @@
vmmc-supply = <&evm_3v3>;
bus-width = <8>;
ti,non-removable;
+ max-frequency = <192000000>;
};
&dra7_pmx_core {
@@ -571,9 +589,10 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
};
-&cpsw_emac1 {
+&cpsw_emac0 {
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
@@ -582,7 +601,6 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- active_slave = <1>;
};
&dcan1 {
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index fa995d0ca1f2..feea98e0a4b5 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -65,7 +65,12 @@
usb4: usb@48950000 {
compatible = "snps,dwc3";
reg = <0x48950000 0x17000>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1dee0aa4f40c..955c24ee4a8c 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -95,6 +95,14 @@
};
};
+&iic0 {
+ status = "okay";
+};
+
+&iic1 {
+ status = "okay";
+};
+
&pfc {
uart1_pins: serial@e1030000 {
renesas,groups = "uart1_ctrl", "uart1_data";
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bb45694d91bc..edad0c4eea35 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -21,6 +21,8 @@
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
+ i2c0 = &iic0;
+ i2c1 = &iic1;
};
cpus {
@@ -66,6 +68,30 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+ iic0_sclkdiv: iic0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x624 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ iic0_sclk: iic0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x48c 1>;
+ clocks = <&iic0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ iic1_sclkdiv: iic1_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x624 16>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ iic1_sclk: iic1_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x490 1>;
+ clocks = <&iic1_sclkdiv>;
+ #clock-cells = <0>;
+ };
pll3_fo: pll3_fo {
compatible = "fixed-factor-clock";
clocks = <&c32ki>;
@@ -234,4 +260,26 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ iic0: i2c@e0070000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-emev2";
+ reg = <0xe0070000 0x28>;
+ interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic0_sclk>;
+ clock-names = "sclk";
+ status = "disabled";
+ };
+
+ iic1: i2c@e10a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-emev2";
+ reg = <0xe10a0000 0x28>;
+ interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&iic1_sclk>;
+ clock-names = "sclk";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 775892b2cc6a..eb379526e234 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -69,66 +69,6 @@
enable-active-high;
};
- hsotg@12480000 {
- vusb_d-supply = <&ldo3_reg>;
- vusb_a-supply = <&ldo8_reg>;
- dr_mode = "peripheral";
- status = "okay";
- };
-
- sdhci_emmc: sdhci@12510000 {
- bus-width = <8>;
- non-removable;
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
- pinctrl-names = "default";
- vmmc-supply = <&vemmc_reg>;
- status = "okay";
- };
-
- sdhci_sd: sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 0>;
- cd-inverted;
- status = "okay";
- };
-
- ehci@12580000 {
- status = "okay";
- port@0 {
- status = "okay";
- };
- };
-
- ohci@12590000 {
- status = "okay";
- port@0 {
- status = "okay";
- };
- };
-
- exynos-usbphy@125B0000 {
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
gpio-keys {
compatible = "gpio-keys";
@@ -186,218 +126,6 @@
enable-active-high;
};
- i2c@13890000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c3_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- tsp@4a {
- /* TBD: Atmel maXtouch touchscreen */
- reg = <0x4a>;
- };
- };
-
- i2c@138B0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c5_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- vdd_arm_reg: pmic@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pmic@66 {
- compatible = "national,lp3974";
- reg = <0x66>;
-
- max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>;
- max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
- <1100000>, <1000000>;
-
- max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
- max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
- regulators {
- ldo2_reg: LDO2 {
- regulator-name = "VALIVE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VUSB+MIPI_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VADC_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VTF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "LDO6";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VLCD+VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VUSB+VDAC_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VCC_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "CAM_AF_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "PS_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VHIC_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "CAM_I_HOST_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "CAM_S_ANA_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VCC_3.0V_LCD";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VINT_1.1V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VG3D_1.1V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VCC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "VMEM_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ap32khz_reg: EN32KHz-AP {
- regulator-name = "32KHz AP";
- regulator-always-on;
- };
-
- cp32khz_reg: EN32KHz-CP {
- regulator-name = "32KHz CP";
- };
-
- vichg_reg: ENVICHG {
- regulator-name = "VICHG";
- };
-
- safeout1_reg: ESAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-always-on;
- };
-
- safeout2_reg: ESAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-boot-on;
- };
- };
- };
- };
-
spi-lcd {
compatible = "spi-gpio";
#address-cells = <1>;
@@ -446,27 +174,6 @@
};
};
- fimd: fimd@11c00000 {
- pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
- pinctrl-names = "default";
- status = "okay";
- samsung,invert-vden;
- samsung,invert-vclk;
- #address-cells = <1>;
- #size-cells = <0>;
- port@3 {
- reg = <3>;
- fimd_dpi_ep: endpoint {
- remote-endpoint = <&lcd_ep>;
- };
- };
- };
-
- pwm@139D0000 {
- compatible = "samsung,s5p6440-pwm";
- status = "okay";
- };
-
camera {
status = "okay";
@@ -526,30 +233,287 @@
pinctrl-names = "default";
status = "okay";
};
+};
- mixer@12C10000 {
+&cpu0 {
+ cpu0-supply = <&vdd_arm_reg>;
+};
+
+&ehci {
+ status = "okay";
+ port@0 {
status = "okay";
};
+};
- hdmi@12D00000 {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd>;
- hdmi-en-supply = <&hdmi_en>;
- vdd-supply = <&ldo3_reg>;
- vdd_osc-supply = <&ldo4_reg>;
- vdd_pll-supply = <&ldo3_reg>;
- ddc = <&hdmi_ddc>;
- status = "okay";
+&exynos_usbphy {
+ status = "okay";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+ pinctrl-names = "default";
+ status = "okay";
+ samsung,invert-vden;
+ samsung,invert-vclk;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@3 {
+ reg = <3>;
+ fimd_dpi_ep: endpoint {
+ remote-endpoint = <&lcd_ep>;
+ };
};
+};
- i2c@138E0000 {
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
+ hdmi-en-supply = <&hdmi_en>;
+ vdd-supply = <&ldo3_reg>;
+ vdd_osc-supply = <&ldo4_reg>;
+ vdd_pll-supply = <&ldo3_reg>;
+ ddc = <&hdmi_ddc>;
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&ldo3_reg>;
+ vusb_a-supply = <&ldo8_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&i2c_3 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ tsp@4a {
+ /* TBD: Atmel maXtouch touchscreen */
+ reg = <0x4a>;
};
};
-&cpu0 {
- cpu0-supply = <&vdd_arm_reg>;
+&i2c_5 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c5_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ vdd_arm_reg: pmic@60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pmic@66 {
+ compatible = "national,lp3974";
+ reg = <0x66>;
+
+ max8998,pmic-buck1-default-dvs-idx = <0>;
+ max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
+ <&gpx0 6 0>;
+ max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+ <1100000>, <1000000>;
+
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+ max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB+MIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VLCD+VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB+VDAC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_AF_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PS_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VHIC_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "CAM_I_HOST_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "CAM_S_ANA_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_3.0V_LCD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VINT_1.1V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VG3D_1.1V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VMEM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
+
+ cp32khz_reg: EN32KHz-CP {
+ regulator-name = "32KHz CP";
+ };
+
+ vichg_reg: ENVICHG {
+ regulator-name = "VICHG";
+ };
+
+ safeout1_reg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-always-on;
+ };
+
+ safeout2_reg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+};
+
+&mdma1 {
+ reg = <0x12840000 0x1000>;
+};
+
+&mixer {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+ port@0 {
+ status = "okay";
+ };
};
&pinctrl_1 {
@@ -568,6 +532,42 @@
};
};
-&mdma1 {
- reg = <0x12840000 0x1000>;
+&pwm {
+ compatible = "samsung,s5p6440-pwm";
+ status = "okay";
+};
+
+&sdhci_0 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vemmc_reg>;
+ status = "okay";
+};
+
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo5_reg>;
+ cd-gpios = <&gpx3 4 0>;
+ cd-inverted;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index afc199d78cb9..884840059018 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -190,6 +190,9 @@
interrupt-parent = <&gpx2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
reg = <0x36>;
+
+ maxim,over-heat-temp = <700>;
+ maxim,over-volt = <4500>;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 886cfca044ac..880917e508b2 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,807 +12,805 @@
* published by the Free Software Foundation.
*/
-/ {
- pinctrl@11400000 {
- gpa0: gpa0 {
- gpio-controller;
- #gpio-cells = <2>;
+&pinctrl_0 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpa1: gpa1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpa2: gpa2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb0: gpb0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb1: gpb1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb2: gpb2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb3: gpb3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc0: gpc0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc1: gpc1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc2: gpc2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc3: gpc3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpd0: gpd0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpd1: gpd1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpy0: gpy0 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy1: gpy1 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy2: gpy2 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy3: gpy3 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy4: gpy4 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy5: gpy5 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy6: gpy6 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpc4: gpc4 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpx0: gpx0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- interrupt-parent = <&combiner>;
- #interrupt-cells = <2>;
- interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
- <26 0>, <26 1>, <27 0>, <27 1>;
- };
-
- gpx1: gpx1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- interrupt-parent = <&combiner>;
- #interrupt-cells = <2>;
- interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
- <30 0>, <30 1>, <31 0>, <31 1>;
- };
-
- gpx2: gpx2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpx3: gpx3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- uart0_data: uart0-data {
- samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart0_fctl: uart0-fctl {
- samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c2_bus: i2c2-bus {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c2_hs_bus: i2c2-hs-bus {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- uart2_data: uart2-data {
- samsung,pins = "gpa1-0", "gpa1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart2_fctl: uart2-fctl {
- samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c3_bus: i2c3-bus {
- samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c3_hs_bus: i2c3-hs-bus {
- samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- uart3_data: uart3-data {
- samsung,pins = "gpa1-4", "gpa1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spi0_bus: spi0-bus {
- samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c4_bus: i2c4-bus {
- samsung,pins = "gpa2-0", "gpa2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c5_bus: i2c5-bus {
- samsung,pins = "gpa2-2", "gpa2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- spi1_bus: spi1-bus {
- samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2s1_bus: i2s1-bus {
- samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
- "gpb0-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pcm1_bus: pcm1-bus {
- samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
- "gpb0-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- ac97_bus: ac97-bus {
- samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
- "gpb0-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2s2_bus: i2s2-bus {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
- "gpb1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pcm2_bus: pcm2-bus {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
- "gpb1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spdif_bus: spdif-bus {
- samsung,pins = "gpb1-0", "gpb1-1";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spi2_bus: spi2-bus {
- samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
- samsung,pin-function = <5>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c6_bus: i2c6-bus {
- samsung,pins = "gpb1-3", "gpb1-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- pwm0_out: pwm0-out {
- samsung,pins = "gpb2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm1_out: pwm1-out {
- samsung,pins = "gpb2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm2_out: pwm2-out {
- samsung,pins = "gpb2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm3_out: pwm3-out {
- samsung,pins = "gpb2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c7_bus: i2c7-bus {
- samsung,pins = "gpb2-2", "gpb2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c0_bus: i2c0-bus {
- samsung,pins = "gpb3-0", "gpb3-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c1_bus: i2c1-bus {
- samsung,pins = "gpb3-2", "gpb3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c0_hs_bus: i2c0-hs-bus {
- samsung,pins = "gpb3-0", "gpb3-1";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c1_hs_bus: i2c1-hs-bus {
- samsung,pins = "gpb3-2", "gpb3-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd0_clk: sd0-clk {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd0_cmd: sd0-cmd {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd0_cd: sd0-cd {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- samsung,pins = "gpc0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus8: sd0-bus-width8 {
- samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_clk: sd1-clk {
- samsung,pins = "gpc2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd1_cmd: sd1-cmd {
- samsung,pins = "gpc2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd1_cd: sd1-cd {
- samsung,pins = "gpc2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- samsung,pins = "gpc2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_clk: sd2-clk {
- samsung,pins = "gpc3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd2_cmd: sd2-cmd {
- samsung,pins = "gpc3-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd2_cd: sd2-cd {
- samsung,pins = "gpc3-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_bus1: sd2-bus-width1 {
- samsung,pins = "gpc3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_bus4: sd2-bus-width4 {
- samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_bus8: sd2-bus-width8 {
- samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pins = "gpc4-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pins = "gpc4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd3_cd: sd3-cd {
- samsung,pins = "gpc4-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd3_bus1: sd3-bus-width1 {
- samsung,pins = "gpc4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- uart1_data: uart1-data {
- samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart1_fctl: uart1-fctl {
- samsung,pins = "gpd0-2", "gpd0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- dp_hpd: dp_hpd {
- samsung,pins = "gpx0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- gpe0: gpe0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpe1: gpe1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf0: gpf0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf1: gpf1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg0: gpg0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg1: gpg1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg2: gpg2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gph0: gph0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gph1: gph1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- cam_gpio_a: cam-gpio-a {
- samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
- "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
- "gpe1-0", "gpe1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_gpio_b: cam-gpio-b {
- samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
- "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c2_bus: cam-i2c2-bus {
- samsung,pins = "gpe0-6", "gpe1-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- cam_spi1_bus: cam-spi1-bus {
- samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c1_bus: cam-i2c1-bus {
- samsung,pins = "gpf0-2", "gpf0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c0_bus: cam-i2c0-bus {
- samsung,pins = "gpf0-0", "gpf0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- cam_spi0_bus: cam-spi0-bus {
- samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_bayrgb_bus: cam-bayrgb-bus {
- samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
- "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
- "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
- "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
- "gpg2-0", "gpg2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_port_a: cam-port-a {
- samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
- "gph1-0", "gph1-1", "gph1-2", "gph1-3",
- "gph1-4", "gph1-5", "gph1-6", "gph1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@10d10000 {
- gpv0: gpv0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpv1: gpv1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpv2: gpv2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpv3: gpv3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpv4: gpv4 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- c2c_rxd: c2c-rxd {
- samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
- "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
- "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
- "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- c2c_txd: c2c-txd {
- samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
- "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
- "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
- "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@03860000 {
- gpz: gpz {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2s0_bus: i2s0-bus {
- samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
- "gpz-4", "gpz-5", "gpz-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpc4: gpc4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+ <26 0>, <26 1>, <27 0>, <27 1>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+ <30 0>, <30 1>, <31 0>, <31 1>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_hs_bus: i2c2-hs-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_hs_bus: i2c3-hs-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpa2-0", "gpa2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpa2-2", "gpa2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpb1-0", "gpb1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpb1-3", "gpb1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpb2-2", "gpb2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_hs_bus: i2c0-hs-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_hs_bus: i2c1-hs-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpc4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpc4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpc4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpc4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph0: gph0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cam_gpio_a: cam-gpio-a {
+ samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+ "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+ "gpe1-0", "gpe1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_b: cam-gpio-b {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c2_bus: cam-i2c2-bus {
+ samsung,pins = "gpe0-6", "gpe1-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi1_bus: cam-spi1-bus {
+ samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c1_bus: cam-i2c1-bus {
+ samsung,pins = "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c0_bus: cam-i2c0-bus {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi0_bus: cam-spi0-bus {
+ samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_bayrgb_bus: cam-bayrgb-bus {
+ samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+ "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+ "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+ "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+ "gpg2-0", "gpg2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a: cam-port-a {
+ samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+ "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+ "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_2 {
+ gpv0: gpv0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv1: gpv1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv2: gpv2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv3: gpv3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv4: gpv4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ c2c_rxd: c2c-rxd {
+ samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+ "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+ "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ c2c_txd: c2c-txd {
+ samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+ "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+ "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_3 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index bf9bee67c416..4a1f88300a28 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -19,7 +19,6 @@
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
@@ -1062,3 +1061,5 @@
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
+
+#include "exynos5250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index be3e02530b42..cebeaab3abec 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -62,13 +62,13 @@
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
};
&uart2 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 8b153166ebdb..130563b2ca95 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,711 +12,710 @@
* published by the Free Software Foundation.
*/
-/ {
- pinctrl@13400000 {
- gpy7: gpy7 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpx0: gpx0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- interrupt-parent = <&combiner>;
- #interrupt-cells = <2>;
- interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
- <26 0>, <26 1>, <27 0>, <27 1>;
- };
-
- gpx1: gpx1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- interrupt-parent = <&combiner>;
- #interrupt-cells = <2>;
- interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
- <30 0>, <30 1>, <31 0>, <31 1>;
- };
-
- gpx2: gpx2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpx3: gpx3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- dp_hpd: dp_hpd {
- samsung,pins = "gpx0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13410000 {
- gpc0: gpc0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc1: gpc1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc2: gpc2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc3: gpc3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpc4: gpc4 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpd1: gpd1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpy0: gpy0 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy1: gpy1 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy2: gpy2 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy3: gpy3 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy4: gpy4 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy5: gpy5 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpy6: gpy6 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- sd0_clk: sd0-clk {
- samsung,pins = "gpc0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd0_cmd: sd0-cmd {
- samsung,pins = "gpc0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd0_cd: sd0-cd {
- samsung,pins = "gpc0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- samsung,pins = "gpc0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd0_bus8: sd0-bus-width8 {
- samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_clk: sd1-clk {
- samsung,pins = "gpc1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd0_rclk: sd0-rclk {
- samsung,pins = "gpc0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
- };
-
- sd1_cmd: sd1-cmd {
- samsung,pins = "gpc1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd1_cd: sd1-cd {
- samsung,pins = "gpc1-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_int: sd1-int {
- samsung,pins = "gpd1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- samsung,pins = "gpc1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd1_bus8: sd1-bus-width8 {
- samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_clk: sd2-clk {
- samsung,pins = "gpc2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd2_cmd: sd2-cmd {
- samsung,pins = "gpc2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
- };
-
- sd2_cd: sd2-cd {
- samsung,pins = "gpc2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_bus1: sd2-bus-width1 {
- samsung,pins = "gpc2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
-
- sd2_bus4: sd2-bus-width4 {
- samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
- };
- };
-
- pinctrl@14000000 {
- gpe0: gpe0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpe1: gpe1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf0: gpf0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpf1: gpf1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg0: gpg0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg1: gpg1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpg2: gpg2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpj4: gpj4 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- cam_gpio_a: cam-gpio-a {
- samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
- "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
- "gpe1-0", "gpe1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_gpio_b: cam-gpio-b {
- samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
- "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c2_bus: cam-i2c2-bus {
- samsung,pins = "gpf0-4", "gpf0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
- cam_spi1_bus: cam-spi1-bus {
- samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c1_bus: cam-i2c1-bus {
- samsung,pins = "gpf0-2", "gpf0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- cam_i2c0_bus: cam-i2c0-bus {
- samsung,pins = "gpf0-0", "gpf0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- cam_spi0_bus: cam-spi0-bus {
- samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- cam_bayrgb_bus: cam-bayrgb-bus {
- samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
- "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
- "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
- "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
- "gpg2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@14010000 {
- gpa0: gpa0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpa1: gpa1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpa2: gpa2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb0: gpb0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb1: gpb1 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb2: gpb2 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb3: gpb3 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpb4: gpb4 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gph0: gph0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- uart0_data: uart0-data {
- samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart0_fctl: uart0-fctl {
- samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart1_data: uart1-data {
- samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart1_fctl: uart1-fctl {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c2_bus: i2c2-bus {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- uart2_data: uart2-data {
- samsung,pins = "gpa1-0", "gpa1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- uart2_fctl: uart2-fctl {
- samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c3_bus: i2c3-bus {
- samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- uart3_data: uart3-data {
- samsung,pins = "gpa1-4", "gpa1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spi0_bus: spi0-bus {
- samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- spi1_bus: spi1-bus {
- samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c4_hs_bus: i2c4-hs-bus {
- samsung,pins = "gpa2-0", "gpa2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c5_hs_bus: i2c5-hs-bus {
- samsung,pins = "gpa2-2", "gpa2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2s1_bus: i2s1-bus {
- samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
- "gpb0-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pcm1_bus: pcm1-bus {
- samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
- "gpb0-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2s2_bus: i2s2-bus {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
- "gpb1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pcm2_bus: pcm2-bus {
- samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
- "gpb1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spdif_bus: spdif-bus {
- samsung,pins = "gpb1-0", "gpb1-1";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- spi2_bus: spi2-bus {
- samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
- samsung,pin-function = <5>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c6_hs_bus: i2c6-hs-bus {
- samsung,pins = "gpb1-3", "gpb1-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- pwm0_out: pwm0-out {
- samsung,pins = "gpb2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm1_out: pwm1-out {
- samsung,pins = "gpb2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm2_out: pwm2-out {
- samsung,pins = "gpb2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- pwm3_out: pwm3-out {
- samsung,pins = "gpb2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- i2c7_hs_bus: i2c7-hs-bus {
- samsung,pins = "gpb2-2", "gpb2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c0_bus: i2c0-bus {
- samsung,pins = "gpb3-0", "gpb3-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c1_bus: i2c1-bus {
- samsung,pins = "gpb3-2", "gpb3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c8_hs_bus: i2c8-hs-bus {
- samsung,pins = "gpb3-4", "gpb3-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c9_hs_bus: i2c9-hs-bus {
- samsung,pins = "gpb3-6", "gpb3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- i2c10_hs_bus: i2c10-hs-bus {
- samsung,pins = "gpb4-0", "gpb4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@03860000 {
- gpz: gpz {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2s0_bus: i2s0-bus {
- samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
- "gpz-4", "gpz-5", "gpz-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+&pinctrl_0 {
+ gpy7: gpy7 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+ <26 0>, <26 1>, <27 0>, <27 1>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+ <30 0>, <30 1>, <31 0>, <31 1>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc4: gpc4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rclk: sd0-rclk {
+ samsung,pins = "gpc0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpc1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpc1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_int: sd1-int {
+ samsung,pins = "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpc1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+};
+
+&pinctrl_2 {
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpj4: gpj4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cam_gpio_a: cam-gpio-a {
+ samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+ "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+ "gpe1-0", "gpe1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_b: cam-gpio-b {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c2_bus: cam-i2c2-bus {
+ samsung,pins = "gpf0-4", "gpf0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi1_bus: cam-spi1-bus {
+ samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c1_bus: cam-i2c1-bus {
+ samsung,pins = "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c0_bus: cam-i2c0-bus {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi0_bus: cam-spi0-bus {
+ samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_bayrgb_bus: cam-bayrgb-bus {
+ samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+ "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+ "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+ "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+ "gpg2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_3 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb4: gpb4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph0: gph0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_hs_bus: i2c4-hs-bus {
+ samsung,pins = "gpa2-0", "gpa2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_hs_bus: i2c5-hs-bus {
+ samsung,pins = "gpa2-2", "gpa2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpb1-0", "gpb1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_hs_bus: i2c6-hs-bus {
+ samsung,pins = "gpb1-3", "gpb1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_hs_bus: i2c7-hs-bus {
+ samsung,pins = "gpb2-2", "gpb2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c8_hs_bus: i2c8-hs-bus {
+ samsung,pins = "gpb3-4", "gpb3-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c9_hs_bus: i2c9-hs-bus {
+ samsung,pins = "gpb3-6", "gpb3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c10_hs_bus: i2c10-hs-bus {
+ samsung,pins = "gpb4-0", "gpb4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_4 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 534f27ceb10b..df9aee92ecf4 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -15,7 +15,6 @@
#include <dt-bindings/clock/exynos5420.h>
#include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
@@ -1166,3 +1165,5 @@
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
+
+#include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
new file mode 100644
index 000000000000..2b289d7c0d13
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Device tree sources for Exynos5422 thermal zone
+ *
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ * Anand Moon <linux.amoon@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ cpu_alert0: cpu-alert-0 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert1: cpu-alert-1 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert2: cpu-alert-2 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 8adf455744e9..1565667e6f69 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
+#include "exynos5422-cpu-thermal.dtsi"
/ {
memory {
@@ -107,6 +108,15 @@
clocks = <&i2s0 CLK_I2S_CDCLK>;
};
};
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 20972 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 130 170 230>;
+ };
};
&clock_audss {
@@ -461,6 +471,32 @@
*/
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo7_reg>;
status = "okay";
};
@@ -477,3 +513,13 @@
&usbdrd_dwc3_1 {
dr_mode = "otg";
};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c499cf..feb9d34b239c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
clock-names = "ipg", "per";
};
+ rtc: rtc@10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "ref", "ipg";
+ };
+
kpp: kpp@10008000 {
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
reg = <0x10008000 0x1000>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index b0d5542ac829..53fd75c8ffcf 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -228,10 +228,11 @@
>;
};
+ /* open drain */
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
>;
};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 82d623d05915..66e47de5e826 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -20,15 +20,7 @@
};
&iomuxc {
- i2c1 {
- /* open drain */
- pinctrl_i2c1_qsrb: i2c1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
- >;
- };
-
+ imx53-qsrb {
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
@@ -38,10 +30,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_qsrb>;
- status = "okay";
-
pmic: mc34708@8 {
compatible = "fsl,mc34708";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index f2867c4b34a8..7b31fdb79ced 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -248,7 +248,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 4493f6e99330..1b66328a8498 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -316,10 +316,13 @@
};
&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};
@@ -380,7 +383,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
@@ -469,7 +471,34 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a857d1294609..7c51839ff934 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -322,10 +322,13 @@
};
&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};
@@ -385,7 +388,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
@@ -476,7 +478,34 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1afe3385e2d2..929e0b37bd9e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -415,10 +415,13 @@
};
&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};
@@ -478,7 +481,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
@@ -568,6 +570,34 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index d1866a0a2f13..741f3d529e3e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -250,7 +250,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 5c6587f6c420..d1e5048b00b5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -202,7 +202,6 @@
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index d7fe6672d00c..340bc8e42650 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -54,6 +54,17 @@
gpio = <&gpio3 22 0>;
enable-active-high;
};
+
+ reg_can_xcvr: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
};
gpio-keys {
@@ -149,6 +160,20 @@
status = "okay";
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <&reg_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
@@ -245,6 +270,20 @@
>;
};
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e329ca5c3322..c37bb9ff9fac 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -28,6 +28,71 @@
};
};
+ clocks {
+ codec_osc: anaclk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_audio: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "cs42888_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound-cs42888 {
+ compatible = "fsl,imx6-sabreauto-cs42888",
+ "fsl,imx-audio-cs42888";
+ model = "imx-cs42888";
+ audio-cpu = <&esai>;
+ audio-asrc = <&asrc>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Line Out Jack", "AOUT1L",
+ "Line Out Jack", "AOUT1R",
+ "Line Out Jack", "AOUT2L",
+ "Line Out Jack", "AOUT2R",
+ "Line Out Jack", "AOUT3L",
+ "Line Out Jack", "AOUT3R",
+ "Line Out Jack", "AOUT4L",
+ "Line Out Jack", "AOUT4R",
+ "AIN1L", "Line In Jack",
+ "AIN1R", "Line In Jack",
+ "AIN2L", "Line In Jack",
+ "AIN2R", "Line In Jack";
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx-sabreauto-spdif";
@@ -45,6 +110,19 @@
};
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+ <&clks IMX6QDL_PLL4_BYPASS>,
+ <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
+ <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+ <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+ assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
@@ -61,6 +139,16 @@
};
};
+&esai {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esai>;
+ assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+ <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -76,6 +164,10 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -180,6 +272,18 @@
};
};
};
+
+ codec: cs42888@48 {
+ compatible = "cirrus,cs42888";
+ reg = <0x48>;
+ clocks = <&codec_osc>;
+ clock-names = "mclk";
+ VA-supply = <&reg_audio>;
+ VD-supply = <&reg_audio>;
+ VLS-supply = <&reg_audio>;
+ VLC-supply = <&reg_audio>;
+ };
+
};
&i2c3 {
@@ -257,6 +361,21 @@
>;
};
+ pinctrl_esai: esaigrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+ MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+ MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030
+ MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
+ MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
+ MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030
+ MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
+ MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030
+ MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030
+ >;
+ };
+
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
@@ -318,6 +437,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -462,6 +587,18 @@
status = "okay";
};
+&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 782379320517..ce4c7313f509 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -53,6 +53,17 @@
gpio = <&gpio3 22 0>;
enable-active-high;
};
+
+ reg_can_xcvr: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
};
gpio-keys {
@@ -148,6 +159,20 @@
status = "okay";
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <&reg_can_xcvr>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
@@ -239,6 +264,20 @@
>;
};
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <
+ /* Flexcan XCVR enable */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 944eb81cb2b8..2c07d3a86b61 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -141,6 +141,13 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 9 0>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 10d0b26c93f1..e716e6f301c6 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -300,8 +300,19 @@
};
esai: esai@02024000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx35-esai";
reg = <0x02024000 0x4000>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+ <&clks IMX6QDL_CLK_ESAI_MEM>,
+ <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+ <&clks IMX6QDL_CLK_ESAI_IPG>,
+ <&clks IMX6QDL_CLK_SPBA>;
+ clock-names = "core", "mem", "extal", "fsys", "dma";
+ dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
ssi1: ssi@02028000 {
@@ -353,8 +364,28 @@
};
asrc: asrc@02034000 {
+ compatible = "fsl,imx53-asrc";
reg = <0x02034000 0x4000>;
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+ <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+ <&clks IMX6QDL_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck_0",
+ "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+ "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+ "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+ "asrck_d", "asrck_e", "asrck_f", "dma";
+ dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-width = <16>;
+ status = "okay";
};
spba@0203c000 {
@@ -687,22 +718,23 @@
fsl,anatop = <&anatop>;
};
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&snvs>;
+ offset = <0x34>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
- compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 0da906bd8df2..10c69963100f 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -61,7 +61,9 @@
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */
<&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
+ <&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */
<&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
<&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
};
@@ -73,16 +75,16 @@
status = "okay";
};
-&uart2 {
+&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
-&uart3 {
+&uart5 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
status = "okay";
};
@@ -130,14 +132,6 @@
>;
};
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1
- MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1
- MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1
- MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1
- >;
- };
pinctrl_uart3: uart3grp {
fsl,pins = <
@@ -146,6 +140,15 @@
>;
};
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1
+ MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1
+ MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
@@ -158,6 +161,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x417059
>;
};
@@ -173,6 +177,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9
>;
};
@@ -188,6 +193,7 @@
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9
>;
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715e3982..320a27f8889e 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -563,22 +563,23 @@
fsl,anatop = <&anatop>;
};
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&snvs>;
+ offset = <0x34>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
- compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index e6223d8e79af..c94f2ea2316e 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/imx6sx-clock.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6sx-pinfunc.h"
#include "skeleton.dtsi"
@@ -662,22 +663,31 @@
};
snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&snvs>;
+ offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
- compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
status = "disabled";
};
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
};
epit1: epit@020d0000 {
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 000000000000..25746b122ea6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+ model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+ compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_sd1_vmmc: sd1_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&cpu0 {
+ arm-supply = <&reg_arm>;
+ soc-supply = <&reg_soc>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: n25q256a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
+ reg = <0>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&reg_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
+ MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
+ MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
+ MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
+ MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
+ MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
+ MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
+ MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
+ MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
+ MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
+ MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
+ MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ /* used for lcd reset */
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sim2: sim2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808
+ MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31
+ MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808
+ MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808
+ MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
+ MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
new file mode 100644
index 000000000000..20c7da1affce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pinfunc.h
@@ -0,0 +1,938 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x0000 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x0000 3 0
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x0000 3 0
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0000 8 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x0000 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x0000 8 0
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x0000 3 0
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0000 8 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x0000 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x0000 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0000 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x0000 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x0000 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x0000 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0000 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x0000 8 0
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0000 8 0
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0000 8 0
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x0000 8 0
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
new file mode 100644
index 000000000000..09edbedfd908
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -0,0 +1,707 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ operating-points = <
+ /* kHz uV */
+ 528000 1250000
+ 396000 1150000
+ 198000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 528000 1250000
+ 396000 1150000
+ 198000 1150000
+ >;
+ clocks = <&clks IMX6UL_CLK_ARM>,
+ <&clks IMX6UL_CLK_PLL2_BUS>,
+ <&clks IMX6UL_CLK_PLL2_PFD2>,
+ <&clks IMX6UL_CA7_SECONDARY_SEL>,
+ <&clks IMX6UL_CLK_STEP>,
+ <&clks IMX6UL_CLK_PLL1_SW>,
+ <&clks IMX6UL_CLK_PLL1_SYS>,
+ <&clks IMX6UL_PLL1_BYPASS>,
+ <&clks IMX6UL_CLK_PLL1>,
+ <&clks IMX6UL_PLL1_BYPASS_SRC>,
+ <&clks IMX6UL_CLK_OSC>;
+ clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
+ "secondary_sel", "step", "pll1_sw",
+ "pll1_sys", "pll1_bypass", "pll1",
+ "pll1_bypass_src", "osc";
+ arm-supply = <&reg_arm>;
+ soc-supply = <&reg_soc>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a02000 0x1000>,
+ <0x00a04000 0x2000>,
+ <0x00a06000 0x2000>;
+ };
+
+ ckil: clock-cli {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ ipp_di0: clock-di0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
+
+ ipp_di1: clock-di1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gpc>;
+ ranges;
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI1>,
+ <&clks IMX6UL_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI2>,
+ <&clks IMX6UL_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI3>,
+ <&clks IMX6UL_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ECSPI4>,
+ <&clks IMX6UL_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart7: serial@02018000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02018000 0x4000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+ <&clks IMX6UL_CLK_UART7_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+ <&clks IMX6UL_CLK_UART1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart8: serial@02024000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x02024000 0x4000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+ <&clks IMX6UL_CLK_UART8_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ gpt1: gpt@02098000 {
+ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+ <&clks IMX6UL_CLK_GPT1_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ fec2: ethernet@020b4000 {
+ compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ENET>,
+ <&clks IMX6UL_CLK_ENET_AHB>,
+ <&clks IMX6UL_CLK_ENET_PTP>,
+ <&clks IMX6UL_CLK_ENET2_REF_125M>,
+ <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<1>;
+ fsl,num-rx-queues=<1>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_WDOG1>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_WDOG2>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6ul-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_3p0: regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2625000>;
+ regulator-max-microvolt = <3400000>;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
+ };
+
+ reg_arm: regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBPHY1>;
+ phy-3p0-supply = <&reg_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBPHY2>;
+ phy-3p0-supply = <&reg_3p0>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x020cc000 0x4000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6ul-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@020e4000 {
+ compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ gpt2: gpt@020e8000 {
+ compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+ reg = <0x020e8000 0x4000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm5: pwm@020f0000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f0000 0x4000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm6: pwm@020f4000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f4000 0x4000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm7: pwm@020f8000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020f8000 0x4000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm8: pwm@020fc000 {
+ compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+ reg = <0x020fc000 0x4000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_DUMMY>,
+ <&clks IMX6UL_CLK_DUMMY>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ };
+
+ fec1: ethernet@02188000 {
+ compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ENET>,
+ <&clks IMX6UL_CLK_ENET_AHB>,
+ <&clks IMX6UL_CLK_ENET_PTP>,
+ <&clks IMX6UL_CLK_ENET_REF>,
+ <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<1>;
+ fsl,num-rx-queues=<1>;
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USDHC1>,
+ <&clks IMX6UL_CLK_USDHC1>,
+ <&clks IMX6UL_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_USDHC2>,
+ <&clks IMX6UL_CLK_USDHC2>,
+ <&clks IMX6UL_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ qspi: qspi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+ reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_QSPI>,
+ <&clks IMX6UL_CLK_QSPI>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ uart2: serial@021e8000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+ <&clks IMX6UL_CLK_UART2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@021ec000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+ <&clks IMX6UL_CLK_UART3_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@021f0000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+ <&clks IMX6UL_CLK_UART4_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@021f4000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+ <&clks IMX6UL_CLK_UART5_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c4: i2c@021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_I2C4>;
+ status = "disabled";
+ };
+
+ uart6: serial@021fc000 {
+ compatible = "fsl,imx6ul-uart",
+ "fsl,imx6q-uart";
+ reg = <0x021fc000 0x4000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+ <&clks IMX6UL_CLK_UART6_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index c42cf8db0451..b738ce0f9d9b 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -121,6 +121,209 @@
clock-output-names = "osc";
};
+ etr@30086000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30086000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ tpiu@30087000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x30087000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ replicator {
+ /*
+ * non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell"
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@30084000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30084000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ etf_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&hugo_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ etf_out_port: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@30083000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30083000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ hugo_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ca_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hugo_funnel_in_port1: endpoint {
+ slave-mode; /* M4 input */
+ };
+ };
+
+ port@2 {
+ reg = <0>;
+ hugo_funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ funnel@30041000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30041000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ ca_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ca_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+
+ /* funnel output port */
+ port@2 {
+ reg = <0>;
+ ca_funnel_out_port0: endpoint {
+ remote-endpoint = <&hugo_funnel_in_port0>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ etm@3007c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007c000 0x1000>;
+ cpu = <&cpu0>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
+ };
+ };
+
+ etm@3007d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007d000 0x1000>;
+
+ /*
+ * System will hang if added nosmp in kernel command line
+ * without arm,primecell-periphid because amba bus try to
+ * read id and core1 power off at this time.
+ */
+ arm,primecell-periphid = <0xbb956>;
+ cpu = <&cpu1>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -212,6 +415,37 @@
#interrupt-cells = <2>;
};
+ wdog1: wdog@30280000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+ };
+
+ wdog2: wdog@30290000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog3: wdog@302a0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog4: wdog@302b0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302b0000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+ status = "disabled";
+ };
+
gpt1: gpt@302d0000 {
compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
reg = <0x302d0000 0x10000>;
@@ -291,17 +525,31 @@
};
snvs: snvs@30370000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x30370000 0x10000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&snvs>;
+ offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
};
clks: ccm@30380000 {
diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
new file mode 100644
index 000000000000..09eed3cea0af
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
@@ -0,0 +1,301 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL/VL
+ *
+ * Copyright (C) 2015, rogershimizu@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-WVL/VL";
+ compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory { /* 256 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pmx_power_hdd0: pmx-power-hdd0 {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+ pmx_power_hdd1: pmx-power-hdd1 {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+ pmx_usb_vbus: pmx-usb-vbus {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+ pmx_led_hdderr0: pmx-led-hdderr0 {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_led_hdderr1: pmx-led-hdderr1 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_led_alarm: pmx-led-alarm {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_red: pmx-led-function-red {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_info: pmx-led-info {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_blue: pmx-led-function-blue {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_power_auto_switch: pmx-power-auto-switch {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ m25p40@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p40", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x60000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@60000 {
+ reg = <0x60000 0x10000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@70000 {
+ reg = <0x70000 0x10000>;
+ label = "uboot_env";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_function &pmx_power_switch
+ &pmx_power_auto_switch>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Function Button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+ &pmx_led_info &pmx_led_power
+ &pmx_led_function_blue
+ &pmx_led_hdderr0
+ &pmx_led_hdderr1>;
+ pinctrl-names = "default";
+
+ led@1 {
+ label = "lswvl:red:alarm";
+ gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+ };
+
+ led@2 {
+ label = "lswvl:red:func";
+ gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+ };
+
+ led@3 {
+ label = "lswvl:amber:info";
+ gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+ };
+
+ led@4 {
+ label = "lswvl:blue:func";
+ gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+ };
+
+ led@5 {
+ label = "lswvl:blue:power";
+ gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ led@6 {
+ label = "lswvl:red:hdderr0";
+ gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+ };
+
+ led@7 {
+ label = "lswvl:red:hdderr1";
+ gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+ &gpio0 16 GPIO_ACTIVE_LOW>;
+
+ gpio-fan,speed-map = <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+
+ alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ hdd_power0: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ hdd_power1: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "HDD1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <&ethphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
new file mode 100644
index 000000000000..f5db16a08597
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts
@@ -0,0 +1,301 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
+ *
+ * Copyright (C) 2015, rogershimizu@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-WXL/WSXL";
+ compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pmx_power_hdd0: pmx-power-hdd0 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_power_hdd1: pmx-power-hdd1 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_usb_vbus: pmx-usb-vbus {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_led_hdderr0: pmx-led-hdderr0 {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+ pmx_led_hdderr1: pmx-led-hdderr1 {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_alarm: pmx-led-alarm {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_red: pmx-led-function-red {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_blue: pmx-led-function-blue {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_info: pmx-led-info {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_power_auto_switch: pmx-power-auto-switch {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ m25p40@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p40", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x60000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@60000 {
+ reg = <0x60000 0x10000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@70000 {
+ reg = <0x70000 0x10000>;
+ label = "uboot_env";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_function &pmx_power_switch
+ &pmx_power_auto_switch>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Function Button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+ &pmx_led_info &pmx_led_power
+ &pmx_led_function_blue
+ &pmx_led_hdderr0
+ &pmx_led_hdderr1>;
+ pinctrl-names = "default";
+
+ led@1 {
+ label = "lswxl:blue:func";
+ gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+ };
+
+ led@2 {
+ label = "lswxl:red:alarm";
+ gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
+ };
+
+ led@3 {
+ label = "lswxl:amber:info";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led@4 {
+ label = "lswxl:blue:power";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led@5 {
+ label = "lswxl:red:func";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ led@6 {
+ label = "lswxl:red:hdderr0";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led@7 {
+ label = "lswxl:red:hdderr1";
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpios = <&gpio0 47 GPIO_ACTIVE_LOW
+ &gpio0 48 GPIO_ACTIVE_LOW>;
+
+ gpio-fan,speed-map = <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+
+ alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
+ };
+ hdd_power0: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+ hdd_power1: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "HDD1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy@8 {
+ device_type = "ethernet-phy";
+ reg = <8>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ ethernet1-port@0 {
+ phy-handle = <&ethphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 204da5b52ef9..2c569a6ddc9a 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -13,6 +13,12 @@
#include "armv7-m.dtsi"
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin) (0x##port * 32 + pin)
+#define LPC_GPIO(port, pin) (port * 32 + pin)
+
/ {
cpus {
#address-cells = <1>;
@@ -22,6 +28,7 @@
compatible = "arm,cortex-m3";
device_type = "cpu";
reg = <0x0>;
+ clocks = <&ccu1 CLK_CPU_CORE>;
};
};
@@ -32,32 +39,173 @@
clock-frequency = <12000000>;
};
- /* Temporary hardcode PLL1 until clk drivers are merged */
- pll1: pll1 {
- compatible = "fixed-factor-clock";
- clocks = <&xtal>;
+ xtal32: xtal32 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ enet_rx_clk: enet_rx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_rx_clk";
+ };
+
+ enet_tx_clk: enet_tx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_tx_clk";
+ };
+
+ gp_clkin: gp_clkin {
+ compatible = "fixed-clock";
#clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <12>;
+ clock-frequency = <0>;
+ clock-output-names = "gp_clkin";
};
};
soc {
+ mmcsd: mmcsd@40004000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x40004000 0x1000>;
+ interrupts = <6>;
+ num-slots = <1>;
+ clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+ clock-names = "ciu", "biu";
+ status = "disabled";
+ };
+
+ usb0: ehci@40006100 {
+ compatible = "nxp,lpc1850-ehci", "generic-ehci";
+ reg = <0x40006100 0x100>;
+ interrupts = <8>;
+ clocks = <&ccu1 CLK_CPU_USB0>;
+ phys = <&usb0_otg_phy>;
+ phy-names = "usb";
+ has-transaction-translator;
+ status = "disabled";
+ };
+
+ usb1: ehci@40007100 {
+ compatible = "nxp,lpc1850-ehci", "generic-ehci";
+ reg = <0x40007100 0x100>;
+ interrupts = <9>;
+ clocks = <&ccu1 CLK_CPU_USB1>;
+ status = "disabled";
+ };
+
+ emc: memory-controller@40005000 {
+ compatible = "arm,pl172", "arm,primecell";
+ reg = <0x40005000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000 0x1000000
+ 1 0 0x1d000000 0x1000000
+ 2 0 0x1e000000 0x1000000
+ 3 0 0x1f000000 0x1000000>;
+ status = "disabled";
+ };
+
+ lcdc: lcd-controller@40008000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x40008000 0x1000>;
+ interrupts = <7>;
+ interrupt-names = "combined";
+ clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_CREG>;
+
+ usb0_otg_phy: phy@004 {
+ compatible = "nxp,lpc1850-usb-otg-phy";
+ clocks = <&ccu1 CLK_USB0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ cgu: clock-controller@40050000 {
+ compatible = "nxp,lpc1850-cgu";
+ reg = <0x40050000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+ };
+
+ ccu1: clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ clock-names = "base_apb3_clk", "base_apb1_clk",
+ "base_spifi_clk", "base_cpu_clk",
+ "base_periph_clk", "base_usb0_clk",
+ "base_usb1_clk", "base_spi_clk";
+ };
+
+ ccu2: clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ clock-names = "base_audio_clk", "base_uart3_clk",
+ "base_uart2_clk", "base_uart1_clk",
+ "base_uart0_clk", "base_ssp1_clk",
+ "base_ssp0_clk", "base_sdio_clk";
+ };
+
uart0: serial@40081000 {
- compatible = "ns16550a";
+ compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x40081000 0x1000>;
reg-shift = <2>;
interrupts = <24>;
- clocks = <&pll1>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
status = "disabled";
};
uart1: serial@40082000 {
- compatible = "ns16550a";
+ compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x40082000 0x1000>;
reg-shift = <2>;
interrupts = <25>;
- clocks = <&pll1>;
+ clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+ clock-names = "uartclk", "reg";
+ status = "disabled";
+ };
+
+ ssp0: spi@40083000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x40083000 0x1000>;
+ interrupts = <22>;
+ clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+ clock-names = "sspclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -65,7 +213,7 @@
compatible = "nxp,lpc3220-timer";
reg = <0x40084000 0x1000>;
interrupts = <12>;
- clocks = <&pll1>;
+ clocks = <&ccu1 CLK_CPU_TIMER0>;
clock-names = "timerclk";
};
@@ -73,25 +221,41 @@
compatible = "nxp,lpc3220-timer";
reg = <0x40085000 0x1000>;
interrupts = <13>;
- clocks = <&pll1>;
+ clocks = <&ccu1 CLK_CPU_TIMER1>;
clock-names = "timerclk";
};
+ pinctrl: pinctrl@40086000 {
+ compatible = "nxp,lpc1850-scu";
+ reg = <0x40086000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_SCU>;
+ };
+
+ can1: can@400a4000 {
+ compatible = "bosch,c_can";
+ reg = <0x400a4000 0x1000>;
+ interrupts = <43>;
+ clocks = <&ccu1 CLK_APB1_CAN1>;
+ status = "disabled";
+ };
+
uart2: serial@400c1000 {
- compatible = "ns16550a";
+ compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x400c1000 0x1000>;
reg-shift = <2>;
interrupts = <26>;
- clocks = <&pll1>;
+ clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+ clock-names = "uartclk", "reg";
status = "disabled";
};
uart3: serial@400c2000 {
- compatible = "ns16550a";
+ compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x400c2000 0x1000>;
reg-shift = <2>;
interrupts = <27>;
- clocks = <&pll1>;
+ clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+ clock-names = "uartclk", "reg";
status = "disabled";
};
@@ -99,7 +263,7 @@
compatible = "nxp,lpc3220-timer";
reg = <0x400c3000 0x1000>;
interrupts = <14>;
- clocks = <&pll1>;
+ clocks = <&ccu1 CLK_CPU_TIMER2>;
clock-names = "timerclk";
};
@@ -107,8 +271,75 @@
compatible = "nxp,lpc3220-timer";
reg = <0x400c4000 0x1000>;
interrupts = <15>;
- clocks = <&pll1>;
+ clocks = <&ccu1 CLK_CPU_TIMER3>;
clock-names = "timerclk";
};
+
+ ssp1: spi@400c5000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x400c5000 0x1000>;
+ interrupts = <23>;
+ clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+ clock-names = "sspclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ can0: can@400e2000 {
+ compatible = "bosch,c_can";
+ reg = <0x400e2000 0x1000>;
+ interrupts = <51>;
+ clocks = <&ccu1 CLK_APB3_CAN0>;
+ status = "disabled";
+ };
+
+ gpio: gpio@400f4000 {
+ compatible = "nxp,lpc1850-gpio";
+ reg = <0x400f4000 0x4000>;
+ clocks = <&ccu1 CLK_CPU_GPIO>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
+ <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>,
+ <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>,
+ <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>,
+ <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>,
+ <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>,
+ <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+ <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+ <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>,
+ <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>,
+ <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>,
+ <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>,
+ <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+ <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+ <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>,
+ <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>,
+ <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>,
+ <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>,
+ <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>,
+ <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>,
+ <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>,
+ <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>,
+ <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>,
+ <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>,
+ <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>,
+ <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>,
+ <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>,
+ <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>,
+ <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>,
+ <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>,
+ <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>,
+ <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>,
+ <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>,
+ <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>,
+ <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>,
+ <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>,
+ <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+ <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>,
+ <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>,
+ <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
+ };
};
};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
new file mode 100644
index 000000000000..5f500c1ad89c
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -0,0 +1,187 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+ model = "CIAA NXP LPC4337";
+ compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart2;
+ serial1 = &uart3;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x28000000 0x0800000>; /* 8 MB */
+ };
+};
+
+&pinctrl {
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "p7_7";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ ssp_pins: ssp-pins {
+ ssp1_cs {
+ pins = "p6_7";
+ function = "gpio";
+ bias-pull-up;
+ bias-disable;
+ };
+
+ ssp1_miso_mosi {
+ pins = "p1_3", "p1_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ ssp1_sck {
+ pins = "pf_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ uart2_rx_cfg {
+ pins = "p7_2";
+ function = "uart2";
+ bias-disable;
+ input-enable;
+ };
+
+ uart2_tx_cfg {
+ pins = "p7_1";
+ function = "uart2";
+ bias-disable;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ bias-disable;
+ input-enable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p2_3";
+ function = "uart3";
+ bias-disable;
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&ssp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp_pins>;
+ cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+ num-cs = <1>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index d04072f40817..32bc7ff4eb2a 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -36,10 +36,250 @@
};
};
-&pll1 {
- clock-mult = <15>;
+&pinctrl {
+ emc_pins: emc-pins {
+ emc_addr0_23_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4", "pa_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_data0_15_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_bls0_3_cfg {
+ pins = "p1_4", "p6_6", "pd_13", "pd_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_cs0_cs2_cfg {
+ pins = "p1_5", "pd_12";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dqm0_3_cfg {
+ pins = "p6_12", "p6_10", "pd_0", "pe_13";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0", "clk1", "clk2", "clk3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ enet_mii_pins: enet-mii-pins {
+ enet_mii_rxd0_3_cfg {
+ pins = "p1_15", "p0_0", "p9_3", "p9_2";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_txd0_3_cfg {
+ pins = "p1_18", "p1_20", "p9_4", "p9_5";
+ function = "enet";
+ bias-disable;
+ };
+
+ enet_mii_crs_col_cfg {
+ pins = "p9_0", "p9_6";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_rx_clk_dv_er_cfg {
+ pins = "pc_0", "p1_16", "p9_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_tx_clk_en_cfg {
+ pins = "p1_19", "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rx_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart0_tx_cfg {
+ pins = "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x100000>; /* 1 MiB */
+ };
+ };
+ };
+
+ cs2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <2>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <30>;
+ mpmc,read-access-delay = <90>;
+ mpmc,page-mode-read-delay = <55>;
+ mpmc,write-access-delay = <55>;
+ mpmc,turn-round-delay = <55>;
+
+ ext_sram: sram@2,0 {
+ compatible = "mmio-sram";
+ reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <25000000>;
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "mii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_mii_pins>;
};
&uart0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
};
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 08a6f757f924..5f7bdad80963 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -15,6 +15,9 @@
#include "lpc18xx.dtsi"
#include "lpc4357.dtsi"
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
/ {
model = "Embedded Artists' LPC4357 Developer's Kit";
compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
@@ -34,8 +37,472 @@
device_type = "memory";
reg = <0x28000000 0x2000000>; /* 32 MB */
};
+
+ /* vmmc is controlled by sdmmc host internally */
+ vmmc: vmmc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ gpio_joystick {
+ compatible = "gpio-keys-polled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_joystick_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ autorepeat;
+
+ button@0 {
+ label = "joy_enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "joy_left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "joy_up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "joy_right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "joy_down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds_mmio {
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4 {
+ gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led5 {
+ gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led6 {
+ gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led7 {
+ gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led8 {
+ gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led9 {
+ gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led10 {
+ gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led11 {
+ gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led12 {
+ gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led13 {
+ gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led14 {
+ gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led15 {
+ gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led16 {
+ gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ emc_pins: emc-pins {
+ emc_addr0_23_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4", "pa_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_data0_31_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3",
+ "pd_2", "pd_3", "pd_4", "pd_5",
+ "pd_6", "pd_7", "pd_8", "pd_9",
+ "pe_5", "pe_6", "pe_7", "pe_8",
+ "pe_9", "pe_10", "pe_11", "pe_12";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_bls0_3_cfg {
+ pins = "p1_4", "p6_6", "pd_13", "pd_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_cs0_3_cfg {
+ pins = "p1_5", "p6_3", "pd_12", "pd_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dqm0_3_cfg {
+ pins = "p6_12", "p6_10", "pd_0", "pe_13";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0", "clk1", "clk2", "clk3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ gpio_joystick_pins: gpio-joystick-pins {
+ gpio_joystick_cfg {
+ pins = "p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+ function = "gpio";
+ input-enable;
+ bias-disable;
+ };
+ };
+
+ sdmmc_pins: sdmmc-pins {
+ sdmmc_clk_cfg {
+ pins = "pc_0";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ sdmmc_cmd_dat0_3_cfg {
+ pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ sdmmc_cd_cfg {
+ pins = "pc_8";
+ function = "sdmmc";
+ bias-pull-down;
+ input-enable;
+ };
+
+ sdmmc_pow_cfg {
+ pins = "pc_9";
+ function = "sdmmc";
+ bias-pull-down;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rx_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart0_tx_cfg {
+ pins = "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p9_3";
+ function = "uart3";
+ bias-pull-down;
+ };
+ };
+
+ usb0_pins: usb0-pins {
+ usb0_pwr_enable {
+ pins = "p2_3";
+ function = "usb0";
+ };
+
+ usb0_pwr_fault {
+ pins = "p8_0";
+ function = "usb0";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x100000>; /* 1 MiB */
+ };
+ };
+ };
+
+ cs2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <2>;
+ mpmc,memory-width = <16>;
+
+ mmio_leds: gpio@2,0 {
+ compatible = "ti,7416374";
+ reg = <2 0 0x2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pins>;
};
&uart0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 9c5e16ba8c95..0521e6864cb7 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -58,6 +58,55 @@
enet0_sgmii_phy = &sgmii_phy1c;
enet1_sgmii_phy = &sgmii_phy1d;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
};
&dspi0 {
@@ -75,10 +124,31 @@
};
};
+&enet0 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy1c>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy1d>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet2 {
+ phy-handle = <&rgmii_phy3>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
pca9547: mux@77 {
+ compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
@@ -133,6 +203,21 @@
reg = <0x4c>;
};
};
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ codec: sgtl5000@2a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x2a>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ clocks = <&sys_mclk 1>;
+ };
+ };
};
};
@@ -231,6 +316,10 @@
};
};
+&sai2 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e2d918..e008f9367510 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -56,6 +56,55 @@
enet0_sgmii_phy = &sgmii_phy2;
enet1_sgmii_phy = &sgmii_phy0;
};
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai1>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
};
&dspi1 {
@@ -73,12 +122,40 @@
};
};
+&enet0 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet2 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
+ codec: sgtl5000@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ clocks = <&sys_mclk 1>;
+ };
};
&ifc {
@@ -118,6 +195,10 @@
};
};
+&sai1 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27ac65a..973a496207fc 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -53,6 +53,9 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
@@ -184,7 +187,7 @@
};
dspi0: dspi@2100000 {
- compatible = "fsl,vf610-dspi";
+ compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
@@ -197,7 +200,7 @@
};
dspi1: dspi@2110000 {
- compatible = "fsl,vf610-dspi";
+ compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
@@ -342,28 +345,30 @@
};
sai1: sai@2b50000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
- clock-names = "sai";
+ clocks = <&platform_clk 1>, <&platform_clk 1>,
+ <&platform_clk 1>, <&platform_clk 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
<&edma0 1 46>;
- big-endian;
status = "disabled";
};
sai2: sai@2b60000 {
+ #sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&platform_clk 1>;
- clock-names = "sai";
+ clocks = <&platform_clk 1>, <&platform_clk 1>,
+ <&platform_clk 1>, <&platform_clk 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
<&edma0 1 44>;
- big-endian;
status = "disabled";
};
@@ -391,6 +396,91 @@
reg = <0x0 0x2d24000 0x0 0x4000>;
};
+ enet0: ethernet@2d10000 {
+ compatible = "fsl,etsec2";
+ device_type = "network";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ model = "eTSEC";
+ fsl,magic-packet;
+ ranges;
+
+ queue-group@2d10000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ queue-group@2d14000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d14000 0x0 0x1000>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ enet1: ethernet@2d50000 {
+ compatible = "fsl,etsec2";
+ device_type = "network";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ model = "eTSEC";
+ ranges;
+
+ queue-group@2d50000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d50000 0x0 0x1000>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ queue-group@2d54000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d54000 0x0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ enet2: ethernet@2d90000 {
+ compatible = "fsl,etsec2";
+ device_type = "network";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ model = "eTSEC";
+ ranges;
+
+ queue-group@2d90000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d90000 0x0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ queue-group@2d94000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x2d94000 0x0 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
new file mode 100644
index 000000000000..17daeae6bbe8
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+ model = "MediaTek MT6580 evaluation board";
+ compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
new file mode 100644
index 000000000000..06fdf6c2d5fd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "mediatek,mt6580";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&sysirq>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6580-timer",
+ "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt6580-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10200100 0x1c>;
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x1000>,
+ <0x10214000 0x2000>,
+ <0x10216000 0x2000>;
+ };
+
+ uart0: serial@11005000 {
+ compatible = "mediatek,mt6580-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11005000 0x400>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11006000 {
+ compatible = "mediatek,mt6580-uart",
+ "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 36677382bdd8..357a91fc2d1d 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -24,6 +24,199 @@
};
};
+&pwrap {
+ pmic: mt6397 {
+ compatible = "mediatek,mt6397";
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vpca7_reg: buck_vpca7 {
+ regulator-compatible = "buck_vpca7";
+ regulator-name = "vpca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca15_reg: buck_vsramca15 {
+ regulator-compatible = "buck_vsramca15";
+ regulator-name = "vsramca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vsramca7_reg: buck_vsramca7 {
+ regulator-compatible = "buck_vsramca7";
+ regulator-name = "vsramca7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vcore_reg: buck_vcore {
+ regulator-compatible = "buck_vcore";
+ regulator-name = "vcore";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgpu_reg: buck_vgpu {
+ regulator-compatible = "buck_vgpu";
+ regulator-name = "vgpu";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <115>;
+ };
+
+ mt6397_vdrm_reg: buck_vdrm {
+ regulator-compatible = "buck_vdrm";
+ regulator-name = "vdrm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vio18_reg: buck_vio18 {
+ regulator-compatible = "buck_vio18";
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vtcxo_reg: ldo_vtcxo {
+ regulator-compatible = "ldo_vtcxo";
+ regulator-name = "vtcxo";
+ regulator-always-on;
+ };
+
+ mt6397_va28_reg: ldo_va28 {
+ regulator-compatible = "ldo_va28";
+ regulator-name = "va28";
+ regulator-always-on;
+ };
+
+ mt6397_vcama_reg: ldo_vcama {
+ regulator-compatible = "ldo_vcama";
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vio28_reg: ldo_vio28 {
+ regulator-compatible = "ldo_vio28";
+ regulator-name = "vio28";
+ regulator-always-on;
+ };
+
+ mt6397_vusb_reg: ldo_vusb {
+ regulator-compatible = "ldo_vusb";
+ regulator-name = "vusb";
+ };
+
+ mt6397_vmc_reg: ldo_vmc {
+ regulator-compatible = "ldo_vmc";
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vmch_reg: ldo_vmch {
+ regulator-compatible = "ldo_vmch";
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+ regulator-compatible = "ldo_vemc3v3";
+ regulator-name = "vemc_3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp1_reg: ldo_vgp1 {
+ regulator-compatible = "ldo_vgp1";
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1220000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ mt6397_vgp2_reg: ldo_vgp2 {
+ regulator-compatible = "ldo_vgp2";
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp3_reg: ldo_vgp3 {
+ regulator-compatible = "ldo_vgp3";
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp5_reg: ldo_vgp5 {
+ regulator-compatible = "ldo_vgp5";
+ regulator-name = "vgp5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vgp6_reg: ldo_vgp6 {
+ regulator-compatible = "ldo_vgp6";
+ regulator-name = "vgp6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+
+ mt6397_vibr_reg: ldo_vibr {
+ regulator-compatible = "ldo_vibr";
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+};
+
&uart3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 0aba9eb28e2b..08371dbae543 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -12,8 +12,10 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/clock/mt8135-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
#include "skeleton64.dtsi"
#include "mt8135-pinfunc.h"
@@ -88,12 +90,11 @@
#clock-cells = <0>;
};
- uart_clk: dummy26m {
+ clk26m: clk26m {
compatible = "fixed-clock";
- clock-frequency = <26000000>;
#clock-cells = <0>;
+ clock-frequency = <26000000>;
};
-
};
soc {
@@ -102,6 +103,26 @@
compatible = "simple-bus";
ranges;
+ topckgen: topckgen@10000000 {
+ compatible = "mediatek,mt8135-topckgen";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: infracfg@10001000 {
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ };
+
+ pericfg: pericfg@10003000 {
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ compatible = "mediatek,mt8135-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ };
+
/*
* Pinctrl access register at 0x10005000 and 0x1020c000 through
* regmap. Register 0x1000b000 is used by EINT.
@@ -134,6 +155,19 @@
clock-names = "system-clk", "rtc-clk";
};
+ pwrap: pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap", "pwrap-bridge";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+ <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "pwrap", "pwrap-bridge";
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "wrap";
+ };
+
sysirq: interrupt-controller@10200030 {
compatible = "mediatek,mt8135-sysirq",
"mediatek,mt6577-sysirq";
@@ -143,6 +177,12 @@
reg = <0 0x10200030 0 0x1c>;
};
+ apmixedsys: apmixedsys@10209000 {
+ compatible = "mediatek,mt8135-apmixedsys";
+ reg = <0 0x10209000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
syscfg_pctl_b: syscfg_pctl_b@1020c000 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020c000 0 0x1000>;
@@ -163,7 +203,8 @@
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11006000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -171,7 +212,8 @@
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11007000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -179,7 +221,8 @@
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11008000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -187,7 +230,8 @@
compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
reg = <0 0x11009000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
new file mode 100644
index 000000000000..9ca2865a83d6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -0,0 +1,369 @@
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "omap34xx.dtsi"
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "devkit8000::led1";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "devkit8000::led2";
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+
+ usr {
+ label = "devkit8000::led3";
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
+ default-state = "on";
+ linux,default-trigger = "usr";
+ };
+
+ pmu_stat {
+ label = "devkit8000::pmu_stat";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "devkit8000";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,audio-routing =
+ "Ext Spk", "PREDRIVEL",
+ "Ext Spk", "PREDRIVER",
+ "MAINMIC", "Main Mic",
+ "Main Mic", "Mic Bias 1";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_EXTRA>;
+ gpio-key,wakeup;
+ };
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_dvi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c2>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tv0: connector@1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /*
+ * pulldowns:
+ * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c6>;
+};
+
+&twl_keypad {
+ linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+ MATRIX_KEY(1, 0, KEY_2)
+ MATRIX_KEY(2, 0, KEY_3)
+ MATRIX_KEY(0, 1, KEY_4)
+ MATRIX_KEY(1, 1, KEY_5)
+ MATRIX_KEY(2, 1, KEY_6)
+ MATRIX_KEY(3, 1, KEY_F5)
+ MATRIX_KEY(0, 2, KEY_7)
+ MATRIX_KEY(1, 2, KEY_8)
+ MATRIX_KEY(2, 2, KEY_9)
+ MATRIX_KEY(3, 2, KEY_F6)
+ MATRIX_KEY(0, 3, KEY_F7)
+ MATRIX_KEY(1, 3, KEY_0)
+ MATRIX_KEY(2, 3, KEY_F8)
+ MATRIX_KEY(4, 5, KEY_RESERVED)
+ MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+ MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
+ >;
+};
+
+&wdt2 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
+
+ ethernet@0,0 {
+ compatible = "davicom,dm9000";
+ reg = <6 0x000 2
+ 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+ bank-width = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ davicom,no-eeprom;
+
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <0>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+
+ gpmc,cs-on-ns = <6>;
+ gpmc,cs-rd-off-ns = <180>;
+ gpmc,cs-wr-off-ns = <180>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <144>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <90>;
+ gpmc,cycle2cycle-delay-ns = <90>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
+};
+
+&omap3_pmx_core {
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+};
+
+&vpll1 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vpll1>;
+ vdda_dac-supply = <&vdac>;
+
+ port {
+ dpi_dvi_out: endpoint@0 {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&venc {
+ status = "ok";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
new file mode 100644
index 000000000000..e84184de2a4a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+ aliases {
+ display0 = &lcd0;
+ display1 = &dvi0;
+ display2 = &tv0;
+ };
+
+ lcd0: display@0 {
+ compatible = "panel-dpi";
+ label = "lcd";
+
+ enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ port {
+ dpi_lcd_out: endpoint@1 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&vio {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcspi2 {
+
+ /* touch controller */
+ ads7846@0 {
+ compatible = "ti,ads7846";
+ vcc-supply = <&vio>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <27 0>; /* gpio_27 */
+ pendown-gpio = <&gpio1 27 0>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,debounce-max = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <5>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,keep-vref-on = <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+
+ linux,wakeup;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
new file mode 100644
index 000000000000..d5705356d52c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 4.3'' LCD panel sold with devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
+ compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+ lcd0: display@0 {
+ panel-timing {
+ clock-frequency = <10164705>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
new file mode 100644
index 000000000000..4afad4b233ec
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
@@ -0,0 +1,37 @@
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/*
+ * 7.0'' LCD panel sold with some devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
+ compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+ lcd0: display@0 {
+ panel-timing {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <48>;
+ vback-porch = <25>;
+ vfront-porch = <12>;
+ vsync-len = <3>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index be2297116a14..40ac89482f5d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -1,5 +1,5 @@
/*
- * Author: Anil Kumar <anilk4.v@gmail.com>
+ * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -7,194 +7,13 @@
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap3-devkit8000-common.dtsi"
/ {
model = "TimLL OMAP3 Devkit8000";
compatible = "timll,omap3-devkit8000", "ti,omap3";
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- leds {
- compatible = "gpio-leds";
-
- heartbeat {
- label = "devkit8000::led1";
- gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- mmc {
- label = "devkit8000::led2";
- gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
- default-state = "on";
- linux,default-trigger = "none";
- };
-
- usr {
- label = "devkit8000::led3";
- gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
- default-state = "on";
- linux,default-trigger = "usr";
- };
-
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "devkit8000";
-
- ti,mcbsp = <&mcbsp2>;
- ti,audio-routing =
- "Ext Spk", "PREDRIVEL",
- "Ext Spk", "PREDRIVER",
- "MAINMIC", "Main Mic",
- "Main Mic", "Mic Bias 1";
- };
-};
-
-&i2c1 {
- clock-frequency = <2600000>;
-
- twl: twl@48 {
- reg = <0x48>;
- interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-
- twl_audio: audio {
- compatible = "ti,twl4030-audio";
- codec {
- };
- };
- };
-};
-
-&i2c2 {
- status = "disabled";
-};
-
-&i2c3 {
- status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&wdt2 {
- status = "disabled";
-};
-
-&mcbsp2 {
- status = "okay";
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
- nand@0,0 {
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
- nand-bus-width = <16>;
- gpmc,device-width = <2>;
- ti,nand-ecc-opt = "sw";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- x-loader@0 {
- label = "X-Loader";
- reg = <0 0x80000>;
- };
-
- bootloaders@80000 {
- label = "U-Boot";
- reg = <0x80000 0x1e0000>;
- };
-
- bootloaders_env@260000 {
- label = "U-Boot Env";
- reg = <0x260000 0x20000>;
- };
-
- kernel@280000 {
- label = "Kernel";
- reg = <0x280000 0x400000>;
- };
-
- filesystem@680000 {
- label = "File System";
- reg = <0x680000 0xf980000>;
- };
- };
-};
-
-&gpmc {
- ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
-
- ethernet@0,0 {
- compatible = "davicom,dm9000";
- reg = <6 0x000 2
- 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
- bank-width = <2>;
- interrupt-parent = <&gpio1>;
- interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
- davicom,no-eeprom;
-
- gpmc,mux-add-data = <0>;
- gpmc,device-width = <1>;
- gpmc,wait-pin = <0>;
- gpmc,cycle2cycle-samecsen = <1>;
- gpmc,cycle2cycle-diffcsen = <1>;
-
- gpmc,cs-on-ns = <6>;
- gpmc,cs-rd-off-ns = <180>;
- gpmc,cs-wr-off-ns = <180>;
- gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <144>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <90>;
- gpmc,cycle2cycle-delay-ns = <90>;
- gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <0>;
- gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,wr-access-ns = <0>;
+ aliases {
+ display1 = &dvi0;
+ display2 = &tv0;
};
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index e63133304a34..d0dd0365bfda 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -319,12 +319,12 @@
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
- ti,x-min = <300>;
- ti,x-max = <3000>;
- ti,y-min = <600>;
- ti,y-max = <3600>;
- ti,x-plate-ohms = <80>;
- ti,pressure-max = <255>;
+ ti,x-min = /bits/ 16 <300>;
+ ti,x-max = /bits/ 16 <3000>;
+ ti,y-min = /bits/ 16 <600>;
+ ti,y-max = /bits/ 16 <3600>;
+ ti,x-plate-ohms = /bits/ 16 <80>;
+ ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
linux,wakeup;
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 18e1649681c1..28430f1596f2 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -218,3 +218,58 @@
pinctrl-0 = <&uart2_pins>;
};
+&mcbsp2 {
+ status = "okay";
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x20000000>;
+
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29c4g96maz";
+ reg = <0 0 0>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x80000>; /* 512KiB */
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1C0000>; /* 1792KiB */
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>; /* 256KiB */
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x800000>; /* 8192KiB */
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0xA80000 0>;
+ /* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index df8908adb0cb..80d236ac64a5 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -62,6 +62,7 @@
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */
>;
};
@@ -123,7 +124,7 @@
label = "lcd35";
reg = <1>; /* CS1 */
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <500000>;
spi-cpol;
spi-cpha;
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
new file mode 100644
index 000000000000..680d7262399c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+ linux,default-trigger = "heartbeat";
+ };
+ gpio22 {
+ label = "overo:blue:gpio22";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0@23 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
+ gpio-key,wakeup;
+ };
+ button1@14 {
+ label = "button1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts
new file mode 100644
index 000000000000..e3e2bce6edbb
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on Palo35";
+ compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
new file mode 100644
index 000000000000..4e725d2d0038
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+ compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
new file mode 100644
index 000000000000..da6afafcc6c1
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+ model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+ compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
new file mode 100644
index 000000000000..334109e14613
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+ ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
+ <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ smsc1: ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ };
+
+ smsc2: ethernet@4,0 {
+ compatible = "smsc,lan9221","smsc,lan9115";
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+
+ reg = <4 0 0xff>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */
+ };
+};
+
+&lis33de {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
new file mode 100644
index 000000000000..b9ce310f6e82
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+ model = "OMAP35xx Gumstix Overo on TobiDuo";
+ compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 69ca7c45bca2..932a02ff552a 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -32,7 +32,3 @@
>;
};
};
-
-&mcbsp2 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index 9619a28dfd7d..25498f756a29 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -19,7 +19,7 @@
/ {
model = "Pandora Handheld Console 1GHz";
- compatible = "ti,omap36xx", "ti,omap3";
+ compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3";
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
index fb803a70a2bb..8775897a4ce7 100644
--- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -19,7 +19,7 @@
/ {
model = "Pandora Handheld Console";
- compatible = "ti,omap3";
+ compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 782ab1ff1d08..f2084e6d01e7 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -199,6 +199,38 @@
gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
};
};
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
+ vcc-supply = <&vaux2>;
+ };
+
+ /* HS USB Host VBUS supply
+ * disabling this regulator causes current leakage, and LCD flicker
+ * on earlier (CC) board revisions, so keep it always on */
+ usb_host_5v: fixed-regulator-usb_host_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_host_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio6 4 0>; /* GPIO_164 */
+ };
+
+ /* wg7210 (wifi+bt module) 32k clock buffer */
+ wg7210_32k: fixed-regulator-wg7210_32k {
+ compatible = "regulator-fixed";
+ regulator-name = "wg7210_32k";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+ };
};
&omap3_pmx_core {
@@ -459,13 +491,18 @@
power = <50>;
};
+/*
+ * Many pandora boards have been produced with defective write-protect switches
+ * on either slot, so it was decided not to use this feature. If you know
+ * your board has good switches, feel free to uncomment wp-gpios below.
+ */
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */
+ /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */
};
&mmc2 {
@@ -473,8 +510,13 @@
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vmmc2>;
bus-width = <4>;
- cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */
+ cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
+};
+
+/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
+&mmc3 {
+ status = "disabled";
};
/* bluetooth*/
@@ -496,6 +538,10 @@
port2-mode = "ehci-phy";
};
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
&gpmc {
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
@@ -545,7 +591,7 @@
reg = <0x280000 0xa00000>;
};
- filesystem@680000 {
+ filesystem@c80000 {
label = "rootfs";
reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 275618f19a43..3cc8f357d5b8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -510,6 +510,13 @@
};
};
};
+
+ palmas_power_button: palmas_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&palmas>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
};
twl6040: twl@4b {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index b1a1263e6001..4205a8ac9ddb 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -873,7 +873,12 @@
dwc3@4a030000 {
compatible = "snps,dwc3";
reg = <0x4a030000 0x10000>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy>, <&usb3_phy>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "peripheral";
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 000000000000..3daec912b4bf
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,273 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-WTGL";
+ compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory { /* 64 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+
+ internal-regs {
+ pinctrl: pinctrl@10000 {
+ pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
+ &pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp12";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp13";
+ marvell,function = "sata1";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp8", "mpp10";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_switch>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_alarm
+ &pmx_led_info>;
+ pinctrl-names = "default";
+
+ led@1 {
+ label = "lswtgl:blue:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led@2 {
+ label = "lswtgl:red:alarm";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led@3 {
+ label = "lswtgl:amber:info";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+ &gpio0 17 GPIO_ACTIVE_LOW>;
+
+ gpio-fan,speed-map = <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+
+ alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdd_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&eth {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <&ethphy>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ rtc {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+};
+
+&wdt {
+ status = "disabled";
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
new file mode 100644
index 000000000000..6b47a52ceb9c
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lswsgl.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Buffalo Linkstation Mini (LS-WSGL)";
+ compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x8000000>; /* 128 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ func {
+ label = "Function Button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "Power-on Switch";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ autopower {
+ label = "Power-auto Switch";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+ &pmx_led_power>;
+ pinctrl-names = "default";
+
+ alarm {
+ label = "lswsgl:alarm:red";
+ gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ info {
+ label = "lswsgl:info:amber";
+ gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ func {
+ label = "lswsgl:func:blue:top";
+ gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "lswsgl:power:blue:bottom";
+ gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+ pinctrl-names = "default";
+
+ sata0_power: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "SATA0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ devbus,keep-config;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Full256Kb";
+ reg = <0 0x40000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <&ethphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+};
+
+&pinctrl {
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp15", "mpp17", "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_func: pmx-leds {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0_power: pmx-sata0-power {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata1_power: pmx-sata1-power {
+ marvell,pins = "mpp19";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 90b99714ad80..7f68a1ee7073 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -7,6 +7,15 @@
compatible = "marvell,pxa27x";
pxabus {
+ pdma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-channels = <32>;
+ #dma-cells = <2>;
+ status = "okay";
+ };
+
pxairq: interrupt-controller@40d00000 {
marvell,intc-priority;
marvell,intc-nr-irqs = <34>;
@@ -17,6 +26,14 @@
clocks = <&clks CLK_NONE>;
};
+ pxa27x_ohci: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBHOST>;
+ status = "disabled";
+ };
+
pwm0: pwm@40b00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
@@ -50,6 +67,8 @@
reg = <0x40f00180 0x24>;
interrupts = <6>;
clocks = <&clks CLK_PWRI2C>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -68,6 +87,23 @@
clocks = <&clks CLK_KEYPAD>;
status = "disabled";
};
+
+ pxa_camera: imaging@50000000 {
+ compatible = "marvell,pxa270-qci";
+ reg = <0x50000000 0x1000>;
+ interrupts = <33>;
+ dmas = <&pdma 68 0 /* Y channel */
+ &pdma 69 0 /* U channel */
+ &pdma 70 0>; /* V channel */
+ dma-names = "CI_Y", "CI_U", "CI_V";
+
+ clocks = <&clks CLK_CAMERA>;
+ clock-names = "ciclk";
+ clock-frequency = <5000000>;
+ clock-output-names = "qci_mclk";
+
+ status = "disabled";
+ };
};
clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 71a0cd7388d1..5e5af078b9b5 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -128,6 +128,10 @@
compatible = "marvell,pxa-mmc";
reg = <0x41100000 0x1000>;
interrupts = <23>;
+ clocks = <&clks CLK_MMC>;
+ dmas = <&pdma 21 3
+ &pdma 22 3>;
+ dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 7ad0b1771098..cf6998a0804d 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -6,6 +6,15 @@
compatible = "marvell,pxa3xx";
pxabus {
+ pdma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-channels = <32>;
+ #dma-cells = <2>;
+ status = "okay";
+ };
+
pwri2c: i2c@40f500c0 {
compatible = "mrvl,pwri2c";
reg = <0x40f500c0 0x30>;
@@ -21,6 +30,8 @@
reg = <0x43100000 90>;
interrupts = <45>;
clocks = <&clks CLK_NAND>;
+ dmas = <&pdma 97>;
+ dma-names = "data";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
@@ -42,6 +53,47 @@
interrupt-controller;
#interrupt-cells = <0x2>;
};
+
+ mmc0: mmc@41100000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ clocks = <&clks CLK_MMC>;
+ dmas = <&pdma 21 3
+ &pdma 22 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mmc1: mmc@42000000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x42000000 0x1000>;
+ interrupts = <41>;
+ clocks = <&clks CLK_MMC1>;
+ dmas = <&pdma 93 3
+ &pdma 94 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mmc2: mmc@42500000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x42500000 0x1000>;
+ interrupts = <55>;
+ clocks = <&clks CLK_MMC2>;
+ dmas = <&pdma 46 3
+ &pdma 47 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ pxa3xx_ohci: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBHOST>;
+ status = "disabled";
+ };
};
clocks {
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 71512b3ca444..34ccb260f12a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -67,6 +67,12 @@
bias-pull-down;
};
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
@@ -140,19 +146,33 @@
status = "okay";
};
+ /* on board fixed 3.3v supply */
+ v3p3_fixed: v3p3 {
+ compatible = "regulator-fixed";
+ regulator-name = "PCIE V3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
+ vmmc-supply = <&v3p3_fixed>;
};
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
+ vmmc-supply = <&v3p3_fixed>;
+ vqmmc-supply = <&v3p3_fixed>;
};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7c939ba8873..88d6655ddaf6 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -7,6 +7,7 @@
aliases {
serial0 = &gsbi7_serial;
+ serial1 = &gsbi6_serial;
};
soc {
@@ -73,6 +74,12 @@
bias-pull-down;
};
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
@@ -84,9 +91,25 @@
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
+
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
};
};
+ ext_3p3v: regulator-fixed@1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
gsbi3: gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
@@ -115,6 +138,18 @@
};
};
+ gsbi@16500000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@16540000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart_pins>;
+ };
+ };
+
gsbi@16600000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -175,11 +210,14 @@
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
};
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
+ vmmc-supply = <&pm8921_l6>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
@@ -187,6 +225,8 @@
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
+ vmmc-supply = <&ext_3p3v>;
+ vqmmc-supply = <&pm8921_lvs1>;
};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index df2061ec630d..d2e94d647c27 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -6,7 +6,6 @@
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-
/ {
model = "Qualcomm APQ8064";
compatible = "qcom,apq8064";
@@ -127,6 +126,13 @@
function = "gsbi3";
};
};
+
+ uart_pins: uart_pins {
+ mux {
+ pins = "gpio14", "gpio15", "gpio16", "gpio17";
+ function = "gsbi6";
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -243,13 +249,13 @@
gsbi3: gsbi@16200000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <3>;
reg = <0x16200000 0x100>;
clocks = <&gcc GSBI3_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
-
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16280000 0x1000>;
@@ -260,6 +266,28 @@
};
};
+ gsbi6: gsbi@16500000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <6>;
+ reg = <0x16500000 0x03>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi6_serial: serial@16540000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16540000 0x100>,
+ <0x16500000 0x03>;
+ interrupts = <0 156 0x0>;
+ clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -287,6 +315,53 @@
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8921";
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <74 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_gpio: gpio@150 {
+
+ compatible = "qcom,pm8921-gpio";
+ reg = <0x150>;
+ interrupts = <192 1>, <193 1>, <194 1>,
+ <195 1>, <196 1>, <197 1>,
+ <198 1>, <199 1>, <200 1>,
+ <201 1>, <202 1>, <203 1>,
+ <204 1>, <205 1>, <206 1>,
+ <207 1>, <208 1>, <209 1>,
+ <210 1>, <211 1>, <212 1>,
+ <213 1>, <214 1>, <215 1>,
+ <216 1>, <217 1>, <218 1>,
+ <219 1>, <220 1>, <221 1>,
+ <222 1>, <223 1>, <224 1>,
+ <225 1>, <226 1>, <227 1>,
+ <228 1>, <229 1>, <230 1>,
+ <231 1>, <232 1>, <233 1>,
+ <234 1>, <235 1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8921_mpps: mpps@50 {
+ compatible = "qcom,pm8921-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts =
+ <128 1>, <129 1>, <130 1>, <131 1>,
+ <132 1>, <133 1>, <134 1>, <135 1>,
+ <136 1>, <137 1>, <138 1>, <139 1>;
+ };
+
+ };
};
gcc: clock-controller@900000 {
@@ -448,14 +523,6 @@
};
/* Temporary fixed regulator */
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- regulator-always-on;
- };
-
sdcc1bam:dma@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
@@ -505,7 +572,6 @@
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
- vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
};
@@ -524,7 +590,6 @@
cap-mmc-highspeed;
max-frequency = <192000000>;
no-1-8-v;
- vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
@@ -542,8 +607,6 @@
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
- vmmc-supply = <&vsdcc_fixed>;
- vqmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index e0b2ce2910e0..ef2fe72b54c9 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -67,15 +67,16 @@
cpu-offset = <0x40000>;
};
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x4000>;
+ tlmm: pinctrl@800000 {
+ compatible = "qcom,msm8660-pinctrl";
+ reg = <0x800000 0x4000>;
+
gpio-controller;
#gpio-cells = <2>;
- ngpio = <173>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
+
};
gcc: clock-controller@900000 {
@@ -115,7 +116,7 @@
pmicintc: pmic@0 {
compatible = "qcom,pm8058";
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <88 8>;
#interrupt-cells = <2>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7f70fae90959..fad71d5527b0 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,6 +26,308 @@
status = "okay";
};
};
+
+ rpm@108000 {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ gsbi@16000000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_SPI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_default>;
+ spi@16080000 {
+ status = "ok";
+ eth@0 {
+ compatible = "micrel,ks8851";
+ reg = <0>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <90 8>;
+ spi-max-frequency = <5400000>;
+ vdd-supply = <&ext_l2>;
+ vdd-io-supply = <&pm8921_lvs6>;
+ reset-gpios = <&msmgpio 89 0>;
+ };
+ };
+ };
+
+ pinctrl@800000 {
+ spi1_default: spi1_default {
+ mux {
+ pins = "gpio6", "gpio7", "gpio9";
+ function = "gsbi1";
+ };
+
+ mosi {
+ pins = "gpio6";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso {
+ pins = "gpio7";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio8";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk {
+ pins = "gpio9";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ ext_l2: gpio-regulator@91 {
+ compatible = "regulator-fixed";
+ regulator-name = "ext_l2";
+ gpio = <&msmgpio 91 0>;
+ startup-delay-us = <10000>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index a02b984cc68d..2096a94c9b52 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/soc/qcom,gsbi.h>
/ {
@@ -73,11 +74,10 @@
cpu-offset = <0x80000>;
};
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
gpio-controller;
#gpio-cells = <2>;
- ngpio = <150>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -105,6 +105,24 @@
#reset-cells = <1>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "syscon";
+ reg = <0x2011000 0x1000>;
+ };
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ };
+ };
+
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
@@ -253,5 +271,30 @@
compatible = "qcom,tcsr-msm8960", "syscon";
reg = <0x1a400000 0x100>;
};
+
+ gsbi@16000000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <1>;
+ reg = <0x16000000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ spi@16080000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x16080000 0x1000>;
+ interrupts = <0 147 0>;
+ spi-max-frequency = <24000000>;
+ cs-gpios = <&msmgpio 8 0>;
+
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 37b47b5538b8..d7c99b894a49 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,17 @@
compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -220,6 +231,11 @@
reg = <0xfc400000 0x4000>;
};
+ tcsr_mutex_block: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
mmcc: clock-controller@fd8c0000 {
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
@@ -227,6 +243,22 @@
reg = <0xfd8c0000 0x6000>;
};
+ tcsr_mutex: tcsr-mutex {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_block 0 0x80>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem@fa00000 {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ reg = <0xfc428000 0x4000>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 277e73c110e5..060c32cbd669 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -86,6 +86,7 @@
reg = <0xfcfe0000 0x18>;
clocks = <&extal_clk>, <&usb_x1_clk>;
clock-output-names = "pll", "i", "g";
+ #power-domain-cells = <0>;
};
/* MSTP clocks */
@@ -157,6 +158,7 @@
<0 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -169,6 +171,7 @@
<0 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -181,6 +184,7 @@
<0 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -193,6 +197,7 @@
<0 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -205,6 +210,7 @@
<0 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -217,6 +223,7 @@
<0 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -229,6 +236,7 @@
<0 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -241,6 +249,7 @@
<0 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -252,6 +261,7 @@
<0 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -266,6 +276,7 @@
<0 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -280,6 +291,7 @@
<0 246 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -294,6 +306,7 @@
<0 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -308,6 +321,7 @@
<0 252 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -338,6 +352,7 @@
<0 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -356,6 +371,7 @@
<0 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -374,6 +390,7 @@
<0 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -392,6 +409,7 @@
<0 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -402,6 +420,7 @@
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 7ee22a41c6c9..cb4f7b2798fe 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -207,6 +207,13 @@
reg = <0 0xe6050000 0 0x9000>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges =
+ <&pfc 0 0 31>, <&pfc 32 32 9>,
+ <&pfc 64 64 22>, <&pfc 96 96 31>,
+ <&pfc 128 128 7>, <&pfc 160 160 19>,
+ <&pfc 192 192 31>, <&pfc 224 224 27>,
+ <&pfc 256 256 28>, <&pfc 288 288 21>,
+ <&pfc 320 320 10>;
interrupts-extended =
<&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
<&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
@@ -434,7 +441,7 @@
};
gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2e31d8c01cbf..105d9c95de4a 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -224,6 +224,9 @@
};
&pfc {
+ pinctrl-0 = <&lcd0_pins>;
+ pinctrl-names = "default";
+
ether_pins: ether {
renesas,groups = "gether_mii", "gether_int";
renesas,function = "gether";
@@ -259,6 +262,16 @@
"fsia_data_in_1", "fsia_data_out_0";
renesas,function = "fsia";
};
+
+ lcd0_pins: lcd0 {
+ renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+ renesas,function = "lcd0";
+
+ /* DBGMD/LCDC0/FSIA MUX */
+ gpio-hog;
+ gpios = <176 0>;
+ output-high;
+ };
};
&tpu {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index d84714468cce..e14cb1438216 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -291,6 +291,7 @@
<0xe605800c 0x20>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 212>;
interrupts-extended =
<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 7ce9f5fd5865..4b1fa9f42ad5 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -53,6 +53,7 @@
reg = <0xfde00000 0x400>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -152,6 +153,7 @@
reg = <0xffc70000 0x1000>;
interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -162,6 +164,7 @@
reg = <0xffc71000 0x1000>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -172,6 +175,7 @@
reg = <0xffc72000 0x1000>;
interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -182,6 +186,7 @@
reg = <0xffc73000 0x1000>;
interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -193,6 +198,7 @@
<0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -207,6 +213,7 @@
<0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -221,6 +228,7 @@
<0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -288,6 +296,7 @@
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -297,6 +306,7 @@
interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -306,6 +316,7 @@
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -315,6 +326,7 @@
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -324,6 +336,7 @@
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -333,6 +346,7 @@
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -341,6 +355,7 @@
reg = <0xffe4e000 0x100>;
interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_MMC>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -349,6 +364,7 @@
reg = <0xffe4c000 0x100>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -357,6 +373,7 @@
reg = <0xffe4d000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -365,6 +382,7 @@
reg = <0xffe4f000 0x100>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -373,6 +391,7 @@
reg = <0xfffc7000 0x18>;
interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -383,6 +402,7 @@
reg = <0xfffc8000 0x18>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -393,6 +413,7 @@
reg = <0xfffc6000 0x18>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -419,6 +440,7 @@
clocks = <&extal_clk>;
clock-output-names = "plla", "pllb", "b",
"out", "p", "s", "s1";
+ #power-domain-cells = <0>;
};
/* Audio clocks; frequencies are set by boards if applicable. */
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c8071e87ae9..6afa909865b5 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -148,7 +148,7 @@
interrupt-controller;
};
- irqpin0: interrupt-controller@fe780010 {
+ irqpin0: interrupt-controller@fe78001c {
compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
#interrupt-cells = <2>;
status = "disabled";
@@ -157,7 +157,8 @@
<0xfe780010 4>,
<0xfe780024 4>,
<0xfe780044 4>,
- <0xfe780064 4>;
+ <0xfe780064 4>,
+ <0xfe780000 4>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
0 28 IRQ_TYPE_LEVEL_HIGH
0 29 IRQ_TYPE_LEVEL_HIGH
@@ -172,6 +173,7 @@
reg = <0xffc70000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -182,6 +184,7 @@
reg = <0xffc71000 0x1000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -192,6 +195,7 @@
reg = <0xffc72000 0x1000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -202,6 +206,7 @@
reg = <0xffc73000 0x1000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -211,6 +216,7 @@
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -220,6 +226,7 @@
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -229,6 +236,7 @@
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -238,6 +246,7 @@
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -247,6 +256,7 @@
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -256,6 +266,7 @@
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -277,6 +288,7 @@
<0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -291,6 +303,7 @@
<0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -305,6 +318,7 @@
<0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#renesas,channels = <3>;
@@ -316,6 +330,7 @@
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+ power-domains = <&cpg_clocks>;
};
sdhi0: sd@ffe4c000 {
@@ -323,6 +338,7 @@
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -331,6 +347,7 @@
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -339,6 +356,7 @@
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -347,6 +365,7 @@
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -357,6 +376,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -367,6 +387,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -377,6 +398,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -385,6 +407,7 @@
reg = <0 0xfff80000 0 0x40000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
ports {
@@ -426,6 +449,7 @@
#clock-cells = <1>;
clock-output-names = "plla", "z", "zs", "s",
"s1", "p", "b", "out";
+ #power-domain-cells = <0>;
};
/* Fixed factor clocks */
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 2eb8a995ae9f..37dec5269491 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -174,7 +174,7 @@
1800000 0>;
};
- sound {
+ rsnd_ak4643: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
@@ -548,7 +548,7 @@
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51ab8865ea37..a0b2a79cbfbd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -113,7 +113,7 @@
};
gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
@@ -134,6 +134,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
};
gpio1: gpio@e6051000 {
@@ -146,6 +147,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
};
gpio2: gpio@e6052000 {
@@ -158,6 +160,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
};
gpio3: gpio@e6053000 {
@@ -170,6 +173,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
};
gpio4: gpio@e6054000 {
@@ -182,6 +186,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
};
gpio5: gpio@e6055000 {
@@ -194,6 +199,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
};
thermal@e61f0000 {
@@ -201,6 +207,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
timer {
@@ -218,6 +225,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -237,6 +245,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -253,6 +262,7 @@
<0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
};
dmac0: dma-controller@e6700000 {
@@ -281,6 +291,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -311,6 +322,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -339,6 +351,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -367,6 +380,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -378,6 +392,7 @@
0 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -389,6 +404,7 @@
0 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -400,6 +416,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -410,6 +427,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -420,6 +438,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -430,6 +449,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -442,6 +462,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -454,6 +475,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -466,6 +488,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -478,6 +501,7 @@
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -488,6 +512,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -500,6 +525,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -517,6 +543,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -527,6 +554,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -537,6 +565,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -547,6 +576,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -558,6 +588,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -569,6 +600,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -580,6 +612,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -591,6 +624,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -602,6 +636,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,6 +648,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,6 +660,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -635,6 +672,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -646,6 +684,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -657,6 +696,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -665,17 +705,30 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7790";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7790";
reg = <0 0xee300000 0 0x2000>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -684,6 +737,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -692,12 +746,13 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
- renesas,buswait = <4>;
- phys = <&usb0 1>;
- phy-names = "usb";
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -708,6 +763,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
status = "disabled";
usb0: usb-channel@0 {
@@ -722,33 +778,37 @@
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin1: video@e6ef1000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin3: video@e6ef3000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -757,6 +817,7 @@
reg = <0 0xfe920000 0 0x8000>;
interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+ power-domains = <&cpg_clocks>;
renesas,has-sru;
renesas,#rpf = <5>;
@@ -769,6 +830,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+ power-domains = <&cpg_clocks>;
renesas,has-lut;
renesas,has-sru;
@@ -782,6 +844,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -795,6 +858,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -849,6 +913,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -859,9 +924,18 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
+ jpu: jpeg-codec@fe980000 {
+ compatible = "renesas,jpu-r8a7790";
+ reg = <0 0xfe980000 0 0x10300>;
+ interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+ power-domains = <&cpg_clocks>;
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -936,6 +1010,7 @@
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1",
"z", "rcan", "adsp";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1249,16 +1324,18 @@
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+ <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
- R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+ R8A7790_CLK_VIN1 R8A7790_CLK_VIN0
+ R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER
R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
>;
clock-output-names =
- "mlb", "vin3", "vin2", "vin1", "vin0", "ether",
- "sata1", "sata0";
+ "mlb", "vin3", "vin2", "vin1", "vin0",
+ "etheravb", "ether", "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1291,6 +1368,7 @@
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
#clock-cells = <1>;
@@ -1300,6 +1378,7 @@
R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
R8A7790_CLK_SCU_ALL
R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
+ R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0
R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
>;
@@ -1309,6 +1388,7 @@
"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
"scu-all",
"scu-dvc1", "scu-dvc0",
+ "scu-ctu1-mix1", "scu-ctu0-mix0",
"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
};
@@ -1321,6 +1401,7 @@
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1334,6 +1415,7 @@
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1346,6 +1428,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1358,6 +1441,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1370,6 +1454,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1380,6 +1465,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1388,10 +1474,11 @@
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <0 0>;
@@ -1422,10 +1509,11 @@
pci1: pci@ee0b0000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>;
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <1 1>;
@@ -1443,6 +1531,7 @@
compatible = "renesas,pci-r8a7790";
device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1495,6 +1584,7 @@
interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -1524,6 +1614,8 @@
<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
+ <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>,
<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
clock-names = "ssi-all",
@@ -1531,6 +1623,8 @@
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
@@ -1547,6 +1641,22 @@
};
};
+ rcar_sound,mix {
+ mix0: mix@0 { };
+ mix1: mix@1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu@0 { };
+ ctu01: ctu@1 { };
+ ctu02: ctu@2 { };
+ ctu03: ctu@3 { };
+ ctu10: ctu@4 { };
+ ctu11: ctu@5 { };
+ ctu12: ctu@6 { };
+ ctu13: ctu@7 { };
+ };
+
rcar_sound,src {
src0: src@0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index cffe33ff4d16..dc158845afdc 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -242,7 +242,7 @@
1800000 0>;
};
- sound {
+ rsnd_ak4643: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index dc1cd3f16606..831525dd39a6 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -70,7 +70,7 @@
};
gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
@@ -91,6 +91,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
};
gpio1: gpio@e6051000 {
@@ -103,6 +104,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
};
gpio2: gpio@e6052000 {
@@ -115,6 +117,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
};
gpio3: gpio@e6053000 {
@@ -127,6 +130,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
};
gpio4: gpio@e6054000 {
@@ -139,6 +143,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
};
gpio5: gpio@e6055000 {
@@ -151,6 +156,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
};
gpio6: gpio@e6055400 {
@@ -163,6 +169,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
};
gpio7: gpio@e6055800 {
@@ -175,6 +182,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
+ power-domains = <&cpg_clocks>;
};
thermal@e61f0000 {
@@ -182,6 +190,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
timer {
@@ -199,6 +208,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -218,6 +228,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -240,6 +251,7 @@
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
};
dmac0: dma-controller@e6700000 {
@@ -268,6 +280,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -298,6 +311,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -326,6 +340,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -354,6 +369,7 @@
"ch12";
clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -365,6 +381,7 @@
0 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -376,6 +393,7 @@
0 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -388,6 +406,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -398,6 +417,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -408,6 +428,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -418,6 +439,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -428,6 +450,7 @@
reg = <0 0xe6520000 0 0x40>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -439,6 +462,7 @@
reg = <0 0xe6528000 0 0x40>;
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -452,6 +476,7 @@
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -464,6 +489,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -476,6 +502,7 @@
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -492,6 +519,7 @@
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -504,6 +532,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -514,6 +543,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -524,6 +554,7 @@
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -535,6 +566,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -546,6 +578,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -557,6 +590,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -568,6 +602,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -579,6 +614,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -590,6 +626,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -601,6 +638,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -612,6 +650,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -623,6 +662,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -634,6 +674,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -645,6 +686,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -656,6 +698,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -667,6 +710,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -678,6 +722,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -689,6 +734,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -700,6 +746,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -711,6 +758,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -722,6 +770,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -730,6 +779,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -741,6 +791,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -749,6 +800,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -757,12 +809,13 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
- renesas,buswait = <4>;
- phys = <&usb0 1>;
- phy-names = "usb";
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -773,6 +826,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
status = "disabled";
usb0: usb-channel@0 {
@@ -787,25 +841,28 @@
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7791";
- clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin1: video@e6ef1000 {
compatible = "renesas,vin-r8a7791";
- clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a7791";
- clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -814,6 +871,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+ power-domains = <&cpg_clocks>;
renesas,has-lut;
renesas,has-sru;
@@ -827,6 +885,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -840,6 +899,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -885,6 +945,7 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -895,9 +956,18 @@
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
+ jpu: jpeg-codec@fe980000 {
+ compatible = "renesas,jpu-r8a7791";
+ reg = <0 0xfe980000 0 0x10300>;
+ interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_JPU>;
+ power-domains = <&cpg_clocks>;
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -972,6 +1042,7 @@
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z",
"rcan", "adsp";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1311,6 +1382,7 @@
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
#clock-cells = <1>;
@@ -1320,6 +1392,7 @@
R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
R8A7791_CLK_SCU_ALL
R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+ R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0
R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
>;
@@ -1329,6 +1402,7 @@
"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
"scu-all",
"scu-dvc1", "scu-dvc0",
+ "scu-ctu1-mix1", "scu-ctu0-mix0",
"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
};
@@ -1351,6 +1425,7 @@
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1364,6 +1439,7 @@
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1376,6 +1452,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1388,6 +1465,7 @@
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1398,6 +1476,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+ power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1406,10 +1485,11 @@
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7791";
device_type = "pci";
- clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <0 0>;
@@ -1440,10 +1520,11 @@
pci1: pci@ee0d0000 {
compatible = "renesas,pci-r8a7791";
device_type = "pci";
- clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <1 1>;
@@ -1493,6 +1574,7 @@
interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -1582,6 +1664,8 @@
<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
+ <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>,
<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
clock-names = "ssi-all",
@@ -1589,6 +1673,8 @@
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
@@ -1605,6 +1691,22 @@
};
};
+ rcar_sound,mix {
+ mix0: mix@0 { };
+ mix1: mix@1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu@0 { };
+ ctu01: ctu@1 { };
+ ctu02: ctu@2 { };
+ ctu03: ctu@3 { };
+ ctu10: ctu@4 { };
+ ctu11: ctu@5 { };
+ ctu12: ctu@6 { };
+ ctu13: ctu@7 { };
+ };
+
rcar_sound,src {
src0: src@0 {
interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 000000000000..96443ec5f6ab
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gose";
+ compatible = "renesas,gose", "renesas,r8a7793";
+
+ aliases {
+ serial0 = &scif0;
+ serial1 = &scif1;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&ether {
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&cmt0 {
+ status = "okay";
+};
+
+&scif0 {
+ status = "okay";
+};
+
+&scif1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
new file mode 100644
index 000000000000..c4654047e684
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -0,0 +1,374 @@
+/*
+ * Device Tree Source for the r8a7793 SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7793-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "renesas,r8a7793";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ voltage-tolerance = <1>; /* 1% */
+ clocks = <&cpg_clocks R8A7793_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
+ irqc0: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ ether: ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7793";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7793-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "z",
+ "rcan", "adsp";
+ #power-domain-cells = <0>;
+ };
+
+ /* Variable factor clocks */
+ sd2_clk: sd2_clk@e6150078 {
+ compatible = "renesas,r8a7793-div6-clock",
+ "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd2";
+ };
+ sd3_clk: sd3_clk@e615026c {
+ compatible = "renesas,r8a7793-div6-clock",
+ "renesas,cpg-div6-clock";
+ reg = <0 0xe615026c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd3";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a7793-div6-clock",
+ "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ zg_clk: zg_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <5>;
+ clock-mult = <1>;
+ clock-output-names = "zg";
+ };
+ zx_clk: zx_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zx";
+ };
+ zs_clk: zs_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zs";
+ };
+ hp_clk: hp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "hp";
+ };
+ p_clk: p_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "p";
+ };
+ rclk_clk: rclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(48 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "rclk";
+ };
+ mp_clk: mp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ clock-output-names = "mp";
+ };
+ cp_clk: cp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "cp";
+ };
+
+ /* Gate clocks */
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7793-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+ <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+ <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+ <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_VCP0 R8A7793_CLK_VPC0
+ R8A7793_CLK_SSP1 R8A7793_CLK_TMU1
+ R8A7793_CLK_3DG R8A7793_CLK_2DDMAC
+ R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0
+ R8A7793_CLK_TMU3 R8A7793_CLK_TMU2
+ R8A7793_CLK_CMT0 R8A7793_CLK_TMU0
+ R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0
+ R8A7793_CLK_VSP1_S
+ >;
+ clock-output-names =
+ "vcp0", "vpc0", "ssp_dev", "tmu1",
+ "pvrsrvkm", "tddmac", "fdp1", "fdp0",
+ "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "vsp1-du0", "vsps";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7793-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>,
+ <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>,
+ <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
+ <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2
+ R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0
+ R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0
+ R8A7793_CLK_PCIEC R8A7793_CLK_IIC1
+ R8A7793_CLK_SSUSB R8A7793_CLK_CMT1
+ R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1
+ >;
+ clock-output-names =
+ "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0",
+ "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+ "usbdmac0", "usbdmac1";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7793_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7793-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>,
+ <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>,
+ <&zx_clk>, <&zx_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_EHCI R8A7793_CLK_HSUSB
+ R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5
+ R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1
+ R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3
+ R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1
+ R8A7793_CLK_SCIF0 R8A7793_CLK_DU1
+ R8A7793_CLK_DU0 R8A7793_CLK_LVDS0
+ >;
+ clock-output-names =
+ "ehci", "hsusb", "hscif2", "scif5", "scif4",
+ "hscif1", "hscif0", "scif3", "scif2",
+ "scif1", "scif0", "du1", "du0", "lvds0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7793-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+ <&p_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2
+ R8A7793_CLK_VIN1 R8A7793_CLK_VIN0
+ R8A7793_CLK_ETHER R8A7793_CLK_SATA1
+ R8A7793_CLK_SATA0
+ >;
+ clock-output-names =
+ "ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
+ "sata1", "sata0";
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
new file mode 100644
index 000000000000..d4dd5a30ccdf
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -0,0 +1,102 @@
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+ model = "SILK";
+ compatible = "renesas,silk", "renesas,r8a7794";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ d3_3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ scif2_pins: serial2 {
+ renesas,groups = "scif2_data";
+ renesas,function = "scif2";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq8";
+ renesas,function = "intc";
+ };
+
+ mmcif0_pins: mmcif0 {
+ renesas,groups = "mmc_data8", "mmc_ctrl";
+ renesas,function = "mmc";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&ether {
+ pinctrl-0 = <&ether_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&mmcif0 {
+ pinctrl-0 = <&mmcif0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&d3_3v>;
+ vqmmc-supply = <&d3_3v>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b73819423311..97c8e9ace5eb 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -39,7 +39,7 @@
};
gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a7-gic";
+ compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
@@ -57,6 +57,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -76,6 +77,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -106,6 +108,13 @@
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a7794";
+ reg = <0 0xe6060000 0 0x11c>;
+ #gpio-range-cells = <3>;
};
dmac0: dma-controller@e6700000 {
@@ -134,6 +143,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -164,6 +174,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -176,6 +187,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -187,6 +199,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -198,6 +211,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -209,6 +223,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -220,6 +235,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -231,6 +247,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -242,6 +259,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -253,6 +271,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -264,6 +283,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -275,6 +295,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -286,6 +307,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -297,6 +319,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -308,6 +331,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -319,6 +343,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -330,6 +355,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -341,6 +367,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -352,6 +379,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -363,6 +391,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -371,17 +400,31 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee100000 0 0x200>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -390,6 +433,7 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -398,6 +442,7 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -424,6 +469,7 @@
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
sd2_clk: sd2_clk@e6150078 {
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index b299b26926d4..c0273755431a 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -49,6 +49,7 @@
compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
memory {
+ device_type = "memory";
reg = <0x60000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 0a7304beb417..bae965c123c1 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -48,6 +48,7 @@
compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
memory {
+ device_type = "memory";
reg = <0x60000000 0x40000000>;
};
@@ -201,6 +202,18 @@
status = "okay";
};
+&usbphy {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
&wdt {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 3ac151102c2f..e36383c701dc 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -48,6 +48,7 @@
compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
memory {
+ device_type = "memory";
reg = <0x60000000 0x40000000>;
};
@@ -459,6 +460,10 @@
status = "okay";
};
+&usbphy {
+ status = "okay";
+};
+
&usb_otg {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index d32229b8a996..946f18705e96 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -169,6 +169,28 @@
clock-names = "timer", "pclk";
};
+ usbphy: phy {
+ compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x17c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ };
+
+ usbphy1: usb-phy1 {
+ #phy-cells = <0>;
+ reg = <0x188>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 42faa19edb7e..d2180e5d2b05 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -48,6 +48,7 @@
compatible = "radxa,rock", "rockchip,rk3188";
memory {
+ device_type = "memory";
reg = <0x60000000 0x80000000>;
};
@@ -358,6 +359,10 @@
status = "okay";
};
+&usbphy {
+ status = "okay";
+};
+
&usb_host {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 0f23aedf9349..316304272118 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -130,6 +130,28 @@
#reset-cells = <1>;
};
+ usbphy: phy {
+ compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy0 {
+ #phy-cells = <0>;
+ reg = <0x10c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ };
+
+ usbphy1: usb-phy1 {
+ #phy-cells = <0>;
+ reg = <0x11c>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 844a6fb64658..f6d2e7894b05 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -43,6 +43,7 @@
/ {
memory {
+ device_type = "memory";
reg = <0x0 0x80000000>;
};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 0b42372e4379..20fa0ef0b96b 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -44,6 +44,7 @@
/ {
memory {
+ device_type = "memory";
reg = <0 0x80000000>;
};
@@ -213,6 +214,8 @@
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-ramp-delay = <8000>;
vin-supply = <&vcc_sys>;
};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index d582811fbd7b..f82b956ebf17 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -49,6 +49,7 @@
compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
memory{
+ device_type = "memory";
reg = <0 0x80000000>;
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
new file mode 100644
index 000000000000..14b9fc73c8a4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -0,0 +1,413 @@
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+ compatible = "netxeon,r89", "rockchip,rk3288";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ };
+
+ vcc_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_otg: vcc-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc_otg";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sdmmc: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sys: sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sys-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: pmic@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "VDD_CPU";
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <8000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_gpu: pmic@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "VDD_GPU";
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <8000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ };
+
+ act8846: pmic@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+ system-power-controller;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_wl: REG7 {
+ regulator-name = "VCC_WL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "VCCA_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "VCC_LAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ act8846 {
+ pmic_vsel: pmic-vsel {
+ rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ pwr_hold: pwr-hold {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sdmmc>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
new file mode 100644
index 000000000000..136d650dd05f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -0,0 +1,232 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ * Chromebook specific parts
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-sdmmc.dtsi"
+
+/ {
+ aliases {
+ /* Assign 20 so we don't get confused w/ builtin ones */
+ i2c20 = &i2c_tunnel;
+ };
+
+ gpio-charger {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ac_present_ap>;
+ };
+
+ /* A non-regulated voltage from power supply or battery */
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vccsys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc33_sys: vcc33-sys {
+ vin-supply = <&vccsys>;
+ };
+
+ vcc_5v: vcc-5v {
+ vin-supply = <&vccsys>;
+ };
+
+ /* This turns on vbus for host1 (dwc2) */
+ vcc5_host1: vcc5-host1-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host1_pwr_en>;
+ regulator-name = "vcc5_host1";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* This turns on vbus for otg for host mode (dwc2) */
+ vcc5v_otg: vcc5v-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbotg_pwren_h>;
+ regulator-name = "vcc5_host2";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&gpio_keys {
+ pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
+ lid {
+ label = "Lid";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ linux,code = <0>; /* SW_LID */
+ linux,input-type = <5>; /* EV_SW */
+ debounce-interval = <1>;
+ };
+};
+
+&rk808 {
+ vcc11-supply = <&vcc_5v>;
+
+ regulators {
+ vcc33_ccd: LDO_REG8 {
+ regulator-name = "vcc33_ccd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ google,cros-ec-spi-pre-delay = <30>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_int>;
+ spi-max-frequency = <3000000>;
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c4 {
+ trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_int>;
+ vcc-supply = <&vcc33_io>;
+ wakeup-source;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &global_pwroff
+
+ /* Wake only */
+ &suspend_l_wake
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &global_pwroff
+
+ /* Sleep only */
+ &suspend_l_sleep
+ >;
+
+ buttons {
+ ap_lid_int_l: ap-lid-int-l {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ charger {
+ ac_present_ap: ac-present-ap {
+ rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ cros-ec {
+ ec_int: ec-int {
+ rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ suspend {
+ suspend_l_wake: suspend-l-wake {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ suspend_l_sleep: suspend-l-sleep {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ trackpad {
+ trackpad_int: trackpad-int {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb-host {
+ host1_pwr_en: host1-pwr-en {
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbotg_pwren_h: usbotg-pwren-h {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
new file mode 100644
index 000000000000..60bd6e91e308
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -0,0 +1,197 @@
+/*
+ * Google Veyron Jerry Rev 3+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Jerry";
+ compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+ "google,veyron-jerry-rev3", "google,veyron-jerry",
+ "google,veyron", "rockchip,rk3288";
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+
+ regulators {
+ mic_vcc: LDO_REG2 {
+ regulator-name = "mic_vcc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ /*
+ * Trackpad pin control is shared between Elan and Synaptics devices
+ * so we have to pull it up to the bus level.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer &trackpad_int>;
+
+ trackpad@15 {
+ /*
+ * Remove the inherited pinctrl settings to avoid clashing
+ * with bus-wide ones.
+ */
+ /delete-property/pinctrl-names;
+ /delete-property/pinctrl-0;
+ };
+
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ interrupt-parent = <&gpio7>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x2c>;
+ hid-descr-addr = <0x0020>;
+ vcc-supply = <&vcc33_io>;
+ wakeup-source;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 000000000000..8fd8ef2c72da
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,230 @@
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+
+/ {
+ model = "Google Minnie";
+ compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+ "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+ "google,veyron-minnie-rev0", "google,veyron-minnie",
+ "google,veyron", "rockchip,rk3288";
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+};
+
+&gpio_keys {
+ pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
+
+ volum_down {
+ label = "Volum_down";
+ gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <100>;
+ };
+
+ volum_up {
+ label = "Volum_up";
+ gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <100>;
+ };
+};
+
+&i2c_tunnel {
+ battery: bq27500@55 {
+ compatible = "ti,bq27500";
+ reg = <0x55>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+ regulators {
+ vcc33_touch: LDO_REG2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_touch";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v_touch: SWITCH_REG2 {
+ regulator-name = "vcc5v_touch";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ volum_down_l: volum-down-l {
+ rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ volum_up_l: volum-up-l {
+ rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ prochot {
+ gpio_prochot: gpio-prochot {
+ rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ touchscreen {
+ touch_int: touch-int {
+ rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ touch_rst: touch-rst {
+ rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
new file mode 100644
index 000000000000..94b56e33d947
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -0,0 +1,128 @@
+/*
+ * Google Veyron Pinky Rev 2 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Pinky";
+ compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+ "google,veyron", "rockchip,rk3288";
+
+ /delete-node/emmc-pwrseq;
+};
+
+&emmc {
+ /*
+ * Use a pullup instead of a drive since the output is 3.3V and
+ * really should be 1.8V (oops). The external pulldown will help
+ * bring the voltage down if we only drive with a pullup here.
+ * Therefore disable the powerseq (and actual reset) for pinky.
+ */
+ /delete-property/mmc-pwrseq;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
+};
+
+&gpio_keys {
+ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+
+ power {
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* Touchpad connector */
+&i2c3 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>;
+ i2c-scl-rising-time-ns = <300>;
+};
+
+&pinctrl {
+ buttons {
+ pwr_key_h: pwr-key-h {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_wp_gpio: sdmmc-wp-gpio {
+ rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&rk808 {
+ regulators {
+ vcc18_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_wp_gpio &sdmmc_bus4>;
+ wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+};
+
+&tsadc {
+ /* Some connection is flaky making the tsadc hang the system */
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
new file mode 100644
index 000000000000..b5334ecff13c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -0,0 +1,122 @@
+/*
+ * Google Veyron (and derivatives) fragment for sdmmc cards
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&io_domains {
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ sdmmc {
+ /*
+ * We run sdmmc at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ /*
+ * Builtin CD line is hooked to ground to prevent JTAG at boot
+ * (and also to get the voltage rail correct).
+ * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+ * think there's a card inserted
+ */
+ sdmmc_cd_disabled: sdmmc-cd-disabled {
+ rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /* This is where we actually hook up CD */
+ sdmmc_cd_gpio: sdmmc-cd-gpio {
+ rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&rk808 {
+ vcc9-supply = <&vcc_5v>;
+
+ regulators {
+ vccio_sd: LDO_REG4 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc33_sd: LDO_REG5 {
+ regulator-name = "vcc33_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ status = "okay";
+
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ num-slots = <1>;
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
new file mode 100644
index 000000000000..a7ea7d06cf7f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -0,0 +1,155 @@
+/*
+ * Google Veyron Speedy Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Speedy";
+ compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+ "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+ "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+ "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
new file mode 100644
index 000000000000..2fa7a0dc83f7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -0,0 +1,563 @@
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_l>;
+ power {
+ label = "Power";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_warm_reset_h>;
+ priority = <200>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_io>;
+ lcdc-supply = <&vcc33_lcd>;
+ wifi-supply = <&vcc18_wl>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_5v: vcc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc33_sys: vcc33-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc50_hdmi: vcc50-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc50_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_5v>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ status = "okay";
+
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
+ i2c-scl-rising-time-ns = <100>; /* 45ns measured */
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ clock-output-names = "xin32k", "wifibt_32kin";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc33_sys>;
+ vcc2-supply = <&vcc33_sys>;
+ vcc3-supply = <&vcc33_sys>;
+ vcc4-supply = <&vcc33_sys>;
+ vcc6-supply = <&vcc_5v>;
+ vcc7-supply = <&vcc33_sys>;
+ vcc8-supply = <&vcc33_sys>;
+ vcc12-supply = <&vcc_18>;
+ vddio-supply = <&vcc33_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc135_ddr: DCDC_REG3 {
+ regulator-name = "vcc135_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ /*
+ * vcc_18 has several aliases. (vcc18_flashio and
+ * vcc18_wl). We'll add those aliases here just to
+ * make it easier to follow the schematic. The signals
+ * are actually hooked together and only separated for
+ * power measurement purposes).
+ */
+ vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /*
+ * Note that both vcc33_io and vcc33_pmuio are always
+ * powered together. To simplify the logic in the dts
+ * we just refer to vcc33_io every time something is
+ * powered from vcc33_pmuio. In fact, on later boards
+ * (such as danger) they're the same net.
+ */
+ vcc33_io: LDO_REG1 {
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd10_lcd_pwren_h: LDO_REG7 {
+ regulator-name = "vdd10_lcd_pwren_h";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc33_lcd: SWITCH_REG1 {
+ regulator-name = "vcc33_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
+ i2c-scl-rising-time-ns = <100>; /* 40ns measured */
+
+ tpm: tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ powered-while-suspended;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* 100kHz since 4.7k resistors don't rise fast enough */
+ clock-frequency = <100000>;
+ i2c-scl-falling-time-ns = <50>; /* 10ns measured */
+ i2c-scl-rising-time-ns = <800>; /* 600ns measured */
+};
+
+&i2c4 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <50>; /* 11ns measured */
+ i2c-scl-rising-time-ns = <300>; /* 225ns measured */
+};
+
+&i2c5 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+ i2c-scl-falling-time-ns = <300>;
+ i2c-scl-rising-time-ns = <1000>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sdio0 {
+ status = "okay";
+
+ broken-cd;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+ vmmc-supply = <&vcc33_sys>;
+ vqmmc-supply = <&vcc18_wl>;
+};
+
+&spi2 {
+ status = "okay";
+
+ rx-sample-delay-ns = <12>;
+};
+
+&tsadc {
+ status = "okay";
+
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&uart0 {
+ status = "okay";
+
+ /* We need to go faster than 24MHz, so adjust clock parents / rates */
+ assigned-clocks = <&cru SCLK_UART0>;
+ assigned-clock-rates = <48000000>;
+
+ /* Pins don't include flow control by default; add that in */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+
+ needs-reset-on-resume;
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+
+ assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+ assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <
+ /* Common for sleep and wake, but no owners */
+ &global_pwroff
+ >;
+ pinctrl-1 = <
+ /* Common for sleep and wake, but no owners */
+ &global_pwroff
+ >;
+
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ buttons {
+ pwr_key_l: pwr-key-l {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
+ <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ reboot {
+ ap_warm_reset_h: ap-warm-reset-h {
+ rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ recovery-switch {
+ rec_mode_l: rec-mode-l {
+ rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio0 {
+ wifi_enable_h: wifienable-h {
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /* NOTE: mislabelled on schematic; should be bt_enable_h */
+ bt_enable_l: bt-enable-l {
+ rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ /*
+ * We run sdio0 at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
+ <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+ };
+
+ tpm {
+ tpm_int_h: tpm-int-h {
+ rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ /*
+ * On Marvell-based hardware this is a no-connect. Make sure we enable
+ * the pullup so that the line doesn't float. The pullup shouldn't
+ * hurt on Broadcom-based hardware since the other side is actively
+ * driving this signal. As proof: we've already got a pullup on RX.
+ */
+ uart0 {
+ uart0_cts: uart0-cts {
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ write-protect {
+ fw_wp_ap: fw-wp-ap {
+ rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 22316d00493e..906e938fb6bf 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -78,6 +78,7 @@
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
@@ -110,19 +111,19 @@
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
- cpu@501 {
+ cpu1: cpu@501 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
};
- cpu@502 {
+ cpu2: cpu@502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
};
- cpu@503 {
+ cpu3: cpu@503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
@@ -168,6 +169,26 @@
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * The rk3288 cannot use the memory area above 0xfe000000
+ * for dma operations for some reason. While there is
+ * probably a better solution available somewhere, we
+ * haven't found it yet and while devices with 2GB of ram
+ * are not affected, this issue prevents 4GB from booting.
+ * So to make these devices at least bootable, block
+ * this area for the time being until the real solution
+ * is found.
+ */
+ dma-unusable@fe000000 {
+ reg = <0xfe000000 0x1000000>;
+ };
+ };
+
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -447,6 +468,8 @@
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
+ resets = <&cru SRST_MAC>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -626,7 +649,7 @@
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
reg = <0xff800000 0x100>;
clocks = <&cru PCLK_WDT>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index a2ae9f32464d..4497d288a7cb 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -172,6 +172,13 @@
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
status = "disabled";
};
@@ -181,6 +188,9 @@
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG1>;
clock-names = "otg";
+ dr_mode = "host";
+ phys = <&usbphy1>;
+ phy-names = "usb2-phy";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
new file mode 100644
index 000000000000..034cd48ae28b
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -0,0 +1,926 @@
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+ model = "Atmel SAMA5D2 family SoC";
+ compatible = "atmel,sama5d2";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart3;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+ };
+
+ ns_sram: sram@00200000 {
+ compatible = "mmio-sram";
+ reg = <0x00200000 0x20000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb0: gadget@00300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,sama5d3-udc";
+ reg = <0x00300000 0x100000
+ 0xfc02c000 0x400>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep7 {
+ reg = <7>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep8 {
+ reg = <8>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep9 {
+ reg = <9>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep10 {
+ reg = <10>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep11 {
+ reg = <11>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep12 {
+ reg = <12>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep13 {
+ reg = <13>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep14 {
+ reg = <14>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+
+ ep15 {
+ reg = <15>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-isoc;
+ };
+ };
+
+ usb1: ohci@00400000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00400000 0x100000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ usb2: ehci@00500000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
+ status = "disabled";
+ };
+
+ L2: cache-controller@00a00000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a00000 0x1000>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramc0: ramc@f000c000 {
+ compatible = "atmel,sama5d3-ddramc";
+ reg = <0xf000c000 0x200>;
+ clocks = <&ddrck>, <&mpddr_clk>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ dma0: dma-controller@f0010000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0010000 0x1000>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
+ };
+
+ pmc: pmc@f0014000 {
+ compatible = "atmel,sama5d2-pmc";
+ reg = <0xf0014000 0x160>;
+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCRCS>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <100000000>;
+ };
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91sam9x5-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCSELS>;
+ clocks = <&main_rc_osc &main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,sama5d3-clk-pll";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <12000000 12000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91sam9x5-clk-master";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <124000000 166000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ h32ck: h32mxck {
+ #clock-cells = <0>;
+ compatible = "atmel,sama5d4-clk-h32mx";
+ clocks = <&mck>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9x5-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ lcdck: lcdck {
+ #clock-cells = <0>;
+ reg = <3>;
+ clocks = <&mck>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ iscck: iscck {
+ #clock-cells = <0>;
+ reg = <18>;
+ clocks = <&mck>;
+ };
+ };
+
+ periph32ck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&h32ck>;
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tdes_clk: tdes_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ matrix1_clk: matrix1_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ hsmc_clk: hsmc_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ flx0_clk: flx0_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ flx1_clk: flx1_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ flx2_clk: flx2_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ flx3_clk: flx3_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ flx4_clk: flx4_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uart2_clk: uart2_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uart3_clk: uart3_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uart4_clk: uart4_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <29>;
+ #clock-cells = <0>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <33>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <34>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb0_clk: tcb0_clk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ tcb1_clk: tcb1_clk {
+ #clock-cells = <0>;
+ reg = <36>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <40>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ uhphs_clk: uhphs_clk {
+ #clock-cells = <0>;
+ reg = <41>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <42>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <43>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <44>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ trng_clk: trng_clk {
+ #clock-cells = <0>;
+ reg = <47>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ classd_clk: classd_clk {
+ #clock-cells = <0>;
+ reg = <59>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+ };
+
+ periph64ck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ dma1_clk: dma1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ aes_clk: aes_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ aesb_clk: aesb_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ sha_clk: sha_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ mpddr_clk: mpddr_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ matrix0_clk: matrix0_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ sdmmc0_hclk: sdmmc0_hclk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ sdmmc1_hclk: sdmmc1_hclk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ lcdc_clk: lcdc_clk {
+ #clock-cells = <0>;
+ reg = <45>;
+ };
+
+ isc_clk: isc_clk {
+ #clock-cells = <0>;
+ reg = <46>;
+ };
+
+ qspi0_clk: qspi0_clk {
+ #clock-cells = <0>;
+ reg = <52>;
+ };
+
+ qspi1_clk: qspi1_clk {
+ #clock-cells = <0>;
+ reg = <53>;
+ };
+ };
+ };
+
+ sha@f0028000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xf0028000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(30))>;
+ dma-names = "tx";
+ clocks = <&sha_clk>;
+ clock-names = "sha_clk";
+ status = "disabled";
+ };
+
+ aes@f002c000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xf002c000 0x100>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(26))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&aes_clk>;
+ clock-names = "aes_clk";
+ status = "disabled";
+ };
+
+ spi0: spi@f8000000 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf8000000 0x100>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(6))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f8008000 {
+ compatible = "atmel,sama5d2-gem";
+ reg = <0xf8008000 0x1000>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */
+ 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */
+ 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ tcb0: timer@f800c000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf800c000 0x100>;
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ tcb1: timer@f8010000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8010000 0x100>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ uart0: serial@f801c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf801c000 0x100>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ uart1: serial@f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x100>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ uart2: serial@f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x100>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&uart2_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ i2c0: i2c@f8028000 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0xf8028000 0x100>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(0))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ status = "disabled";
+ };
+
+ pit: timer@f8048030 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xf8048030 0x10>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&h32ck>;
+ };
+
+ sckc@f8048050 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xf8048050 0x4>;
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <250000000>;
+ atmel,startup-time-usec = <75>;
+ };
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ atmel,startup-time-usec = <1200000>;
+ };
+
+ clk32k: slowck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
+
+ rtc@f80480b0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xf80480b0 0x30>;
+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
+ };
+
+ spi1: spi@fc000000 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc000000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(8))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(9))>;
+ dma-names = "tx", "rx";
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart3: serial@fc008000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc008000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&uart3_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ uart4: serial@fc00c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc00c000 0x100>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&uart4_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ aic: interrupt-controller@fc020000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,sama5d2-aic";
+ interrupt-controller;
+ reg = <0xfc020000 0x200>;
+ atmel,external-irqs = <49>;
+ };
+
+ i2c1: i2c@fc028000 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0xfc028000 0x100>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(2))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi1_clk>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07bce..7fa276515f11 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -145,8 +145,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
i2c0: i2c@f0014000 {
@@ -1259,13 +1259,15 @@
};
rstc@fffffe00 {
- compatible = "atmel,at91sam9g45-rstc";
+ compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k>;
};
shutdown-controller@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fffffe30 {
@@ -1279,6 +1281,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
@@ -1315,6 +1318,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
};
};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index f7fa58fe09f1..801f9745e82f 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -31,8 +31,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
};
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 3ee22ee13c5a..8d1de29e8da1 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -957,8 +957,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf801c000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
macb0: ethernet@f8020000 {
@@ -1185,29 +1185,20 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xfc020000 0x100>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>;
- clock-names = "t0_clk";
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
};
adc0: adc@fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
- pinctrl-names = "default";
- pinctrl-0 = <
- /* external trigger is conflict with USBA_VBUS */
- &pinctrl_adc0_ad0
- &pinctrl_adc0_ad1
- &pinctrl_adc0_ad2
- &pinctrl_adc0_ad3
- &pinctrl_adc0_ad4
- >;
clocks = <&adc_clk>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0x01f>;
atmel,adc-startup-time = <40>;
- atmel,adc-use-external;
+ atmel,adc-use-external-triggers;
atmel,adc-vref = <3000>;
atmel,adc-res = <8 10>;
atmel,adc-sample-hold-time = <11>;
@@ -1277,13 +1268,15 @@
};
rstc@fc068600 {
- compatible = "atmel,at91sam9g45-rstc";
+ compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
+ clocks = <&clk32k>;
};
shdwc@fc068610 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfc068610 0x10>;
+ clocks = <&clk32k>;
};
pit: timer@fc068630 {
@@ -1296,6 +1289,7 @@
watchdog@fc068640 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfc068640 0x10>;
+ clocks = <&clk32k>;
status = "disabled";
};
@@ -1329,6 +1323,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfc0686b0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k>;
};
dbgu: serial@fc069000 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 11e17c5f26e2..ff7c8f298f30 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -392,6 +392,9 @@
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges =
+ <&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>,
+ <&pfc 288 288 22>;
interrupts-extended =
<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 80f924deed37..314e589cfa00 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -164,7 +164,7 @@
dbg_base_clk: dbg_base_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-perip-clk";
- clocks = <&main_pll>;
+ clocks = <&main_pll>, <&osc1>;
div-reg = <0xe8 0 9>;
reg = <0x50>;
};
@@ -318,7 +318,7 @@
l3_sp_clk: l3_sp_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&mainclk>;
+ clocks = <&l3_mp_clk>;
div-reg = <0x64 2 2>;
};
@@ -349,7 +349,7 @@
dbg_clk: dbg_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&dbg_base_clk>;
+ clocks = <&dbg_at_clk>;
div-reg = <0x68 2 2>;
clk-gate = <0x60 5>;
};
@@ -481,8 +481,37 @@
clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
clk-gate = <0xa0 11>;
};
+
+ ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dqs_clk>;
+ clk-gate = <0xd8 0>;
+ };
+
+ ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_2x_dqs_clk>;
+ clk-gate = <0xd8 1>;
+ };
+
+ ddr_dq_clk_gate: ddr_dq_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dq_clk>;
+ clk-gate = <0xd8 2>;
+ };
+
+ h2f_user2_clk: h2f_user2_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&h2f_usr2_clk>;
+ clk-gate = <0xd8 3>;
+ };
+
};
- };
+ };
gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
@@ -565,7 +594,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff708000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
porta: gpio-controller@0 {
@@ -585,7 +614,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff709000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
portb: gpio-controller@0 {
@@ -605,7 +634,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xff70a000 0x1000>;
- clocks = <&per_base_clk>;
+ clocks = <&l4_mp_clk>;
status = "disabled";
portc: gpio-controller@0 {
@@ -639,6 +668,8 @@
cache-level = <2>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <2 1 1>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
};
mmc: dwmmc0@ff704000 {
@@ -752,6 +783,7 @@
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
};
usbphy0: usbphy@0 {
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4779b07310df..2340fcb2b535 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -16,11 +16,17 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -409,6 +415,8 @@
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
clock-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -426,6 +434,8 @@
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
clock-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -588,6 +598,7 @@
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x100>;
+ altr,modrst-offset = <0x20>;
};
scu: snoop-control-unit@ffffc000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 94a0709b2fe6..99aa9a1c8af0 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -21,7 +21,8 @@
compatible = "altr,socfpga-arria10", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200 rootwait";
+ bootargs = "earlyprintk";
+ stdout-path = "serial1:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index ccaf41742fc3..a75a666032b2 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -22,7 +22,8 @@
compatible = "altr,socfpga-arria5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
new file mode 100644
index 000000000000..555e9caf21e1
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Terasic DE-0(Atlas)";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ hps0 {
+ label = "hps_led0";
+ gpios = <&portb 24 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+
+ max-frame-size = <3800>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ speed-mode = <0>;
+
+ adxl345: adxl345@0 {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+
+ interrupt-parent = <&portc>;
+ interrupts = <3 2>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&regulator_3_3v>;
+ vqmmc-supply = <&regulator_3_3v>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 258865da8f6a..d4d0a28fb331 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -22,7 +22,8 @@
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 5e17fd147728..48bf651bd762 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -22,7 +22,8 @@
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index e65744fc12ab..ad45f5e8fac7 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -134,7 +134,7 @@
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
@@ -143,7 +143,7 @@
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index eab3477e0a0e..ae0527754000 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -22,11 +22,15 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
};
@@ -65,6 +69,17 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
+ pwm_regulator: pwm-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 3 8448>;
+ regulator-name = "CPU_1V0_AVS";
+ regulator-min-microvolt = <784000>;
+ regulator-max-microvolt = <1299000>;
+ regulator-always-on;
+ max-duty-cycle = <255>;
+ status = "okay";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -539,6 +554,7 @@
status = "disabled";
};
+
st_dwc3: dwc3@8f94000 {
compatible = "st,stih407-dwc3";
reg = <0x08f94000 0x1000>, <0x110 0x4>;
@@ -565,5 +581,34 @@
<&phy_port2 PHY_TYPE_USB3>;
};
};
+
+ /* COMMS PWM Module */
+ pwm0: pwm@9810000 {
+ compatible = "st,sti-pwm";
+ status = "okay";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <1>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@9510000 {
+ compatible = "st,sti-pwm";
+ status = "okay";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 0a754f275212..1683debd0854 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -439,6 +439,194 @@
};
};
};
+
+ tsin0 {
+ pinctrl_tsin0_parallel: tsin0_parallel {
+ st,pins {
+ DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin0_serial: tsin0_serial {
+ st,pins {
+ DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin1 {
+ pinctrl_tsin1_parallel: tsin1_parallel {
+ st,pins {
+ DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin1_serial: tsin1_serial {
+ st,pins {
+ DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin2 {
+ pinctrl_tsin2_parallel: tsin2_parallel {
+ st,pins {
+ DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+ DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin2_serial: tsin2_serial {
+ st,pins {
+ DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin3 {
+ pinctrl_tsin3_serial: tsin3_serial {
+ st,pins {
+ DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin4 {
+ pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+ st,pins {
+ DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+ ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+ PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsin5 {
+ pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+ st,pins {
+ DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+ st,pins {
+ DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsout0 {
+ pinctrl_tsout0_parallel: tsout0_parallel {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ pinctrl_tsout0_serial: tsout0_serial {
+ st,pins {
+ DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+ VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ tsout1 {
+ pinctrl_tsout1_serial: tsout1_serial {
+ st,pins {
+ DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+ VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
+ mtsin0 {
+ pinctrl_mtsin0_parallel: mtsin0_parallel {
+ st,pins {
+ DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front1 {
@@ -452,6 +640,18 @@
interrupts-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
+ tsin4 {
+ pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+ st,pins {
+ DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+ VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+ };
+
pio20: pio@09210000 {
gpio-controller;
#gpio-cells = <1>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 2c560fc30503..3efa3b2ebe90 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -147,33 +147,5 @@
};
};
};
-
- /* COMMS PWM Module */
- pwm0: pwm@9810000 {
- compatible = "st,sti-pwm";
- status = "disabled";
- #pwm-cells = <2>;
- reg = <0x9810000 0x68>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
- };
-
- /* SBC PWM Module */
- pwm1: pwm@9510000 {
- compatible = "st,sti-pwm";
- status = "disabled";
- #pwm-cells = <2>;
- reg = <0x9510000 0x68>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1_chan0_default
- &pinctrl_pwm1_chan1_default
- &pinctrl_pwm1_chan2_default
- &pinctrl_pwm1_chan3_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
- st,pwm-num-chan = <4>;
- };
};
};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b5803a30096..d1f2acafc9b6 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -137,7 +137,7 @@
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
@@ -146,7 +146,7 @@
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 208b5e89036a..6f40bc99c22f 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,6 +10,10 @@
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ aliases {
+ bdisp0 = &bdisp0;
+ };
+
soc {
usb2_picophy1: phy2 {
compatible = "st,stih407-usb2-phy";
@@ -218,5 +222,13 @@
};
};
};
+
+ bdisp0:bdisp@9f10000 {
+ compatible = "st,stih407-bdisp";
+ reg = <0x9f10000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+ clock-names = "bdisp";
+ clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 0ab23daa2829..148e1772465f 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -137,7 +137,7 @@
clk_s_c0_pll0: clk-s-c0-pll0 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
@@ -146,7 +146,7 @@
clk_s_c0_pll1: clk-s-c0-pll1 {
#clock-cells = <1>;
- compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+ compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 354d90f521b6..8160a75539a4 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -17,11 +17,15 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 000000000000..6964fc9e97cf
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32429i-EVAL board";
+ compatible = "st,stm32429i-eval", "st,stm32f429";
+
+ chosen {
+ bootargs = "root=/dev/ram rdinit=/linuxrc";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6b9aa59d978a..f0b731db6f53 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -53,8 +53,8 @@
compatible = "st,stm32f429i-disco", "st,stm32f429";
chosen {
- bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
- linux,stdout-path = &usart1;
+ bootargs = "root=/dev/ram rdinit=/linuxrc";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -66,6 +66,10 @@
};
};
+&clk_hse {
+ clock-frequency = <8000000>;
+};
+
&usart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index aa73b4f4172c..d78a4815da8f 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -49,48 +49,10 @@
/ {
clocks {
- clk_sysclk: clk-sysclk {
+ clk_hse: clk-hse {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <180000000>;
- };
-
- clk_hclk: clk-hclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <180000000>;
- };
-
- clk_pclk1: clk-pclk1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <45000000>;
- };
-
- clk_pclk2: clk-pclk2 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <90000000>;
- };
-
- clk_pmtr1: clk-pmtr1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <90000000>;
- };
-
- clk_pmtr2: clk-pmtr2 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <180000000>;
- };
-
- clk_systick: clk-systick {
- compatible = "fixed-factor-clock";
- clocks = <&clk_hclk>;
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
+ clock-frequency = <0>;
};
};
@@ -99,7 +61,7 @@
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 128>;
status = "disabled";
};
@@ -107,7 +69,7 @@
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 129>;
status = "disabled";
};
@@ -115,7 +77,7 @@
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 130>;
status = "disabled";
};
@@ -123,14 +85,14 @@
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 131>;
};
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 132>;
status = "disabled";
};
@@ -138,7 +100,7 @@
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
- clocks = <&clk_pmtr1>;
+ clocks = <&rcc 0 133>;
status = "disabled";
};
@@ -146,7 +108,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 145>;
status = "disabled";
};
@@ -154,7 +116,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 146>;
status = "disabled";
};
@@ -162,7 +124,7 @@
compatible = "st,stm32-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 147>;
status = "disabled";
};
@@ -170,7 +132,7 @@
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 148>;
status = "disabled";
};
@@ -178,7 +140,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 158>;
status = "disabled";
};
@@ -186,7 +148,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
- clocks = <&clk_pclk1>;
+ clocks = <&rcc 0 159>;
status = "disabled";
};
@@ -194,7 +156,7 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
- clocks = <&clk_pclk2>;
+ clocks = <&rcc 0 164>;
status = "disabled";
};
@@ -202,13 +164,20 @@
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
- clocks = <&clk_pclk2>;
+ clocks = <&rcc 0 165>;
status = "disabled";
};
+
+ rcc: rcc@40023810 {
+ #clock-cells = <2>;
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>;
+ };
};
};
&systick {
- clocks = <&clk_systick>;
+ clocks = <&rcc 1 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 93d435670ef1..f3cb297fd1db 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -125,12 +125,21 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
usb2_vbus_pin_a: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
};
};
+&reg_usb0_vbus {
+ regulator-boot-on;
+ status = "okay";
+};
+
&reg_usb1_vbus {
status = "okay";
};
@@ -146,7 +155,13 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 5878a0b11f7b..143056872650 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -114,6 +114,30 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+&reg_usb0_vbus {
+ status = "okay";
+};
+
&reg_usb2_vbus {
status = "okay";
};
@@ -124,7 +148,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 9afb4e018593..046a84d9719d 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -155,6 +155,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
@@ -162,6 +166,13 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
&reg_ahci_5v {
@@ -216,7 +227,15 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000000..985e15503378
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Iteaduino Plus A10";
+ compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ahci {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&reg_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index ebe2a04ef649..a7dd86d30fa2 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -114,6 +114,15 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ regulator-boot-on;
+ status = "okay";
+};
+
&reg_usb1_vbus {
status = "okay";
};
@@ -128,7 +137,13 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index b64aa4eb071e..28e32ad705cd 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -150,6 +150,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
@@ -164,6 +168,20 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
};
&reg_ahci_5v {
@@ -172,6 +190,10 @@
status = "okay";
};
+&reg_usb0_vbus {
+ status = "okay";
+};
+
&reg_usb1_vbus {
status = "okay";
};
@@ -186,7 +208,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index adaa57b7a943..1f3c51a08113 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -646,6 +646,19 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun4i-a10-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ahb_gates 0>;
+ interrupts = <38>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ allwinner,sram = <&otg_sram 1>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
@@ -756,8 +769,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
pwm0_pins_a: pwm0@0 {
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index a7e19e4847f7..5a422c1ff725 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -96,8 +96,15 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp152: pmic@30 {
+ reg = <0x30>;
+ interrupts = <0>;
+ };
};
+#include "axp152.dtsi"
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@@ -189,6 +196,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
allwinner,pins = "PG1";
@@ -217,6 +228,18 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG12";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&reg_usb0_vbus {
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ status = "okay";
};
&reg_usb1_vbus {
@@ -243,8 +266,20 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG11";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
-
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 990f9d61ae4d..3724b988064e 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -45,6 +45,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
@@ -96,6 +97,25 @@
status = "okay";
};
+&lradc {
+ vref-supply = <&reg_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
@@ -110,6 +130,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_h702: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
@@ -117,6 +141,20 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
#include "axp209.dtsi"
@@ -152,13 +190,33 @@
regulator-name = "vcc-wifi";
};
+&reg_usb0_vbus {
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 42324005eb7c..b3c234c65ea1 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -159,6 +159,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
@@ -174,6 +178,20 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
@@ -182,6 +200,11 @@
};
};
+&reg_usb0_vbus {
+ status = "okay";
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
@@ -194,7 +217,21 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 514f159a14d4..eb793d5a2bd6 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -93,7 +93,7 @@
compatible = "chipone,icn8318";
reg = <0x40>;
interrupt-parent = <&pio>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+ interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
pinctrl-names = "default";
pinctrl-0 = <&ts_wake_pin_p66>;
wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
@@ -153,6 +153,10 @@
};
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_p66: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
@@ -161,6 +165,20 @@
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
i2c_lcd_pins: i2c_lcd_pin@0 {
allwinner,pins = "PG10", "PG12";
allwinner,function = "gpio_out";
@@ -219,7 +237,16 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 427c0e7289fa..78b993abbaa3 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -417,6 +417,19 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun4i-a10-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ahb_gates 0>;
+ interrupts = <38>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ allwinner,sram = <&otg_sram 1>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
@@ -476,8 +489,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
i2c0_pins_a: i2c0@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index 4404f37d132e..4dd70cce2127 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -143,6 +143,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index e4d3484d97bd..54bb83b58f42 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -544,6 +544,19 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun6i-a31-musb";
+ reg = <0x01c19000 0x0400>;
+ clocks = <&ahb1_gates 24>;
+ resets = <&ahb1_rst 24>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
usbphy: phy@01c19400 {
compatible = "allwinner,sun6i-a31-usb-phy";
reg = <0x01c19400 0x10>,
@@ -631,8 +644,7 @@
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index 1e2411a2bcea..5e8f8c4f2b30 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -93,6 +93,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 4611e2f5a99e..e6b019232a9e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -88,15 +88,11 @@
};
};
- reg_vmmc3: vmmc3 {
- compatible = "regulator-fixed";
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_pin_cubietruck>;
- regulator-name = "vmmc3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
+ reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
};
@@ -172,7 +168,8 @@
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <&reg_vmmc3>;
+ vmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
@@ -181,7 +178,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
interrupt-names = "host-wake";
};
};
@@ -199,23 +196,27 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
- vmmc3_pin_cubietruck: vmmc3_pin@0 {
- allwinner,pins = "PH9";
+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+ allwinner,pins = "PH12";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
+ led_pins_cubietruck: led_pins@0 {
+ allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+ mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
+ allwinner,pins = "PH9";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -227,6 +228,20 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
&pwm {
@@ -288,7 +303,16 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index f32f6f20d923..1e6bd360dac0 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -178,7 +178,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
interrupt-names = "host-wake";
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 769726dfb046..04237085dc39 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -135,6 +135,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
@@ -149,6 +153,20 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
};
&reg_ahci_5v {
@@ -157,6 +175,10 @@
status = "okay";
};
+&reg_usb0_vbus {
+ status = "okay";
+};
+
&reg_usb1_vbus {
status = "okay";
};
@@ -171,7 +193,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 00f8f25eccae..c5d70caade82 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -215,6 +215,10 @@
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
allwinner,pins = "PH11";
@@ -229,12 +233,30 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
};
&reg_ahci_5v {
status = "okay";
};
+&reg_usb0_vbus {
+ status = "okay";
+};
+
&reg_usb1_vbus {
status = "okay";
};
@@ -275,7 +297,17 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index d3b2f26417aa..2bebaa286f9a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -722,6 +722,19 @@
#size-cells = <0>;
};
+ usb_otg: usb@01c13000 {
+ compatible = "allwinner,sun4i-a10-musb";
+ reg = <0x01c13000 0x0400>;
+ clocks = <&ahb_gates 0>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ allwinner,sram = <&otg_sram 1>;
+ status = "disabled";
+ };
+
usbphy: phy@01c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
@@ -825,8 +838,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
pwm0_pins_a: pwm0@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index c318c770b6c1..27a925ec17d2 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -347,6 +347,28 @@
#size-cells = <0>;
};
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 26>;
+ resets = <&ahb1_rst 26>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+ resets = <&ahb1_rst 29>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pio: pinctrl@01c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
@@ -354,8 +376,7 @@
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 95134c69cfc1..8d9da6886a4c 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -125,3 +125,12 @@
pinctrl-0 = <&r_uart_pins_a>;
status = "okay";
};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 8698f7aa31c7..2cc27c7a59dc 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -58,6 +58,39 @@
clock-output-names = "mbus";
};
};
+
+ soc@01c00000 {
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun6i-a31-musb";
+ reg = <0x01c19000 0x0400>;
+ clocks = <&ahb1_gates 24>;
+ resets = <&ahb1_rst 24>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun8i-a23-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1";
+ clocks = <&usb_clk 8>,
+ <&usb_clk 9>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&usb_clk 0>,
+ <&usb_clk 1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+ };
};
&pio {
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 866703355b9c..1aefc6793e25 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -61,6 +61,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -109,6 +113,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
@@ -123,3 +131,12 @@
pinctrl-0 = <&r_uart_pins_a>;
status = "okay";
};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 100644
index 000000000000..a43897515fb6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1,133 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Ippo Q8H Quad Core Tablet (v1.2)";
+ compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <&reg_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 5788c29cb56a..1d5390d4e03a 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -63,6 +63,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&lradc {
vref-supply = <&reg_vcc3v0>;
status = "okay";
@@ -113,6 +117,10 @@
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+&ohci0 {
+ status = "okay";
+};
+
&pio {
mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
@@ -127,3 +135,8 @@
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+ usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 85ee08098b7b..faa7d3c1fcea 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -80,6 +80,39 @@
clock-output-names = "mbus";
};
};
+
+ soc@01c00000 {
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c19000 0x0400>;
+ clocks = <&ahb1_gates 24>;
+ resets = <&ahb1_rst 24>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun8i-a33-usb-phy";
+ reg = <0x01c19400 0x14>,
+ <0x01c1a800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1";
+ clocks = <&usb_clk 8>,
+ <&usb_clk 9>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&usb_clk 0>,
+ <&usb_clk 1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+ };
};
&pio {
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 51cc8383f70f..f1953b0c5059 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -108,6 +108,7 @@
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
enable-active-high;
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
status = "disabled";
@@ -120,6 +121,7 @@
regulator-name = "usb2-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
enable-active-high;
gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index f58a3d9d5f13..9d4f86e9c50a 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -214,9 +214,9 @@
#dma-cells = <1>;
};
- ahb: ahb@6000c004 {
+ ahb: ahb@6000c000 {
compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
- reg = <0x6000c004 0x14c>;
+ reg = <0x6000c000 0x150>;
};
gpio: gpio@6000d000 {
@@ -234,6 +234,7 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ gpio-ranges = <&pinmux 0 0 246>;
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index bd43ed6d6ec7..66b4451eb2ca 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -53,6 +53,14 @@
};
};
+ gpu@0,57000000 {
+ /*
+ * Node left disabled on purpose - the bootloader will enable
+ * it after having set the VPR up
+ */
+ vdd-supply = <&vdd_gpu>;
+ };
+
pinmux: pinmux@0,70000868 {
pinctrl-names = "boot";
pinctrl-0 = <&state_boot>;
@@ -1462,7 +1470,7 @@
vin-ldo9-10-supply = <&vdd_5v0_sys>;
vin-ldo11-supply = <&vdd_3v3_run>;
- sd0 {
+ vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
@@ -1514,7 +1522,7 @@
regulator-always-on;
};
- sd6 {
+ vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
@@ -1694,6 +1702,13 @@
non-removable;
};
+ /* CPU DFLL clock */
+ clock@0,70110000 {
+ status = "okay";
+ vdd-cpu-supply = <&vdd_cpu>;
+ nvidia,i2c-fs-rate = <400000>;
+ };
+
ahub@0,70300000 {
i2s@0,70301100 {
status = "okay";
@@ -1732,6 +1747,12 @@
};
};
+ cpus {
+ cpu@0 {
+ vdd-cpu-supply = <&vdd_cpu>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 79e724bb7df7..cfbdf429b45d 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -43,6 +43,14 @@
};
};
+ gpu@0,57000000 {
+ /*
+ * Node left disabled on purpose - the bootloader will enable
+ * it after having set the VPR up
+ */
+ vdd-supply = <&vdd_gpu>;
+ };
+
pinmux: pinmux@0,70000868 {
pinctrl-names = "boot";
pinctrl-0 = <&pinmux_boot>;
@@ -735,7 +743,7 @@
regulator-always-on;
};
- sd6 {
+ vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 01a9f742b08f..1e204a6de12c 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "skeleton.dtsi"
@@ -188,6 +189,9 @@
clock-names = "gpu", "pwr";
resets = <&tegra_car 184>;
reset-names = "gpu";
+
+ iommus = <&mc TEGRA_SWGROUP_GPU>;
+
status = "disabled";
};
@@ -254,6 +258,7 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ gpio-ranges = <&pinmux 0 0 251>;
};
apbdma: dma@0,60020000 {
@@ -702,6 +707,30 @@
#thermal-sensor-cells = <1>;
};
+ dfll: clock@0,70110000 {
+ compatible = "nvidia,tegra124-dfll";
+ reg = <0 0x70110000 0 0x100>, /* DFLL control */
+ <0 0x70110000 0 0x100>, /* I2C output control */
+ <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+ <0 0x70110200 0 0x100>; /* Look-up table RAM */
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+ <&tegra_car TEGRA124_CLK_DFLL_REF>,
+ <&tegra_car TEGRA124_CLK_I2C5>;
+ clock-names = "soc", "ref", "i2c";
+ resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+ reset-names = "dvco";
+ #clock-cells = <0>;
+ clock-output-names = "dfllCPU_out";
+ nvidia,sample-rate = <12500>;
+ nvidia,droop-ctrl = <0x00000f00>;
+ nvidia,force-mode = <1>;
+ nvidia,cf = <10>;
+ nvidia,ci = <0>;
+ nvidia,cg = <2>;
+ status = "disabled";
+ };
+
ahub@0,70300000 {
compatible = "nvidia,tegra124-ahub";
reg = <0x0 0x70300000 0x0 0x200>,
@@ -922,6 +951,15 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+
+ clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+ <&tegra_car TEGRA124_CLK_CCLK_LP>,
+ <&tegra_car TEGRA124_CLK_PLL_X>,
+ <&tegra_car TEGRA124_CLK_PLL_P>,
+ <&dfll>;
+ clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ /* FIXME: what's the actual transition time? */
+ clock-latency = <300000>;
};
cpu@1 {
@@ -943,6 +981,18 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>,
+ <&{/cpus/cpu@2}>,
+ <&{/cpus/cpu@3}>;
+ };
+
thermal-zones {
cpu {
polling-delay-passive = <1000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f444b67f55c6..e058709e6d98 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -225,9 +225,9 @@
#dma-cells = <1>;
};
- ahb@6000c004 {
+ ahb@6000c000 {
compatible = "nvidia,tegra20-ahb";
- reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+ reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
};
gpio: gpio@6000d000 {
@@ -244,6 +244,7 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ gpio-ranges = <&pinmux 0 0 224>;
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 782b11b2af6a..fe04fb5e155f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -329,9 +329,9 @@
#dma-cells = <1>;
};
- ahb: ahb@6000c004 {
+ ahb: ahb@6000c000 {
compatible = "nvidia,tegra30-ahb";
- reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+ reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
};
gpio: gpio@6000d000 {
@@ -349,6 +349,7 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ gpio-ranges = <&pinmux 0 0 248>;
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
index 200b0c99ed34..bfd3bb8c8285 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -44,6 +44,7 @@
/dts-v1/;
/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
/ {
@@ -57,11 +58,18 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
};
};
@@ -74,6 +82,30 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+&ethsc {
interrupts = <0 49 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index 6a34c56e4693..a6a185fae8f1 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -64,6 +64,18 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <36864000>;
+ };
+
+ iobus_clk: iobus_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
};
soc {
@@ -79,12 +91,141 @@
#size-cells = <1>;
};
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
system-bus-controller-misc@59800000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
reg = <0x59800000 0x2000>;
};
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ interrupts = <0 80 4>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ interrupts = <0 81 4>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ interrupts = <0 82 4>;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-ld4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -108,3 +249,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
new file mode 100644
index 000000000000..33963acd7e8f
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-LD6b Reference Board";
+ compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serial0;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&ethsc {
+ interrupts = <0 50 4>;
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
new file mode 100644
index 000000000000..c6499ee65bc6
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD6b SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the ProXstream2 die.
+ * Reuse the ProXstream2 device tree with some properties overridden.
+ */
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+ compatible = "socionext,ph1-ld6b";
+};
+
+/* UART3 unavilable: the pads are not wired to the package balls */
+&serial3 {
+ status = "disabled";
+};
+
+/*
+ * PH1-LD6b and ProXstream2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+ compatible = "socionext,ph1-ld6b-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
index d891135a70c2..69a5b7d39629 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -44,6 +44,7 @@
/dts-v1/;
/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
/ {
@@ -57,11 +58,20 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
};
};
@@ -74,6 +84,30 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+&ethsc {
interrupts = <0 50 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index dc633603aed2..e8bbc454d788 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -71,6 +71,18 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <73728000>;
+ };
+
+ i2c_clk: i2c_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
};
soc {
@@ -86,12 +98,156 @@
#size-cells = <1>;
};
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* i2c4 does not exist */
+
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
system-bus-controller-misc@59800000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
reg = <0x59800000 0x2000>;
};
+ usb2: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ interrupts = <0 80 4>;
+ };
+
+ usb3: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ interrupts = <0 81 4>;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-pro4-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -115,3 +271,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
new file mode 100644
index 000000000000..59c2b127cffa
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro5 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-pro5";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <73728000>;
+ };
+
+ i2c_clk: i2c_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 177 4>;
+ clocks = <&uart_clk>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* i2c4 does not exist */
+
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
index 3ea64ae009e9..1a440f87fa92 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -44,6 +44,7 @@
/dts-v1/;
/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
/ {
@@ -58,11 +59,18 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
};
};
@@ -75,6 +83,38 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+&ethsc {
interrupts = <0 49 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 248b1886834f..3cc90cd37a26 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -71,6 +71,18 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <36864000>;
+ };
+
+ iobus_clk: iobus_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
};
soc {
@@ -108,10 +120,120 @@
<0x20000100 0x100>;
};
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c4: i2c@58600000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58600000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
+
system-bus-controller-misc@59800000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
reg = <0x59800000 0x2000>;
};
+
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ };
+
+ usb3: usb@5a830100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a830100 0x100>;
+ interrupts = <0 83 4>;
+ };
};
};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
index dcdc4f74387d..955d417a5c42 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -44,6 +44,7 @@
/dts-v1/;
/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/include/ "uniphier-support-card.dtsi"
/ {
@@ -57,11 +58,18 @@
chosen {
bootargs = "console=ttyS0,115200";
- stdout-path = &serialsc;
+ stdout-path = &serial0;
};
aliases {
- serial0 = &serialsc;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
};
};
@@ -74,6 +82,34 @@
ranges = <0x00000000 1 0x03f00000 0x00100000>;
};
-&serialsc {
+&ethsc {
interrupts = <0 48 4>;
};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index baa71e1febb8..58067dfc16e5 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -64,6 +64,18 @@
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <80000000>;
+ };
+
+ iobus_clk: iobus_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
};
soc {
@@ -79,12 +91,141 @@
#size-cells = <1>;
};
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 29 4>;
+ clocks = <&uart_clk>;
+ fifo-size = <64>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
system-bus-controller-misc@59800000 {
compatible = "socionext,uniphier-system-bus-controller-misc",
"syscon";
reg = <0x59800000 0x2000>;
};
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ interrupts = <0 80 4>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ interrupts = <0 81 4>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ interrupts = <0 82 4>;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,ph1-sld8-pinctrl",
+ "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
timer@60000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x60000200 0x20>;
@@ -108,3 +249,5 @@
};
};
};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000000..f67445f4f10d
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier SoCs default pinctrl settings
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&pinctrl {
+ pinctrl_i2c0: i2c0_grp {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ pinctrl_i2c1: i2c1_grp {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ pinctrl_i2c2: i2c2_grp {
+ groups = "i2c2";
+ function = "i2c2";
+ };
+
+ pinctrl_i2c3: i2c3_grp {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+
+ pinctrl_uart0: uart0_grp {
+ groups = "uart0";
+ function = "uart0";
+ };
+
+ pinctrl_uart1: uart1_grp {
+ groups = "uart1";
+ function = "uart1";
+ };
+
+ pinctrl_uart2: uart2_grp {
+ groups = "uart2";
+ function = "uart2";
+ };
+
+ pinctrl_uart3: uart3_grp {
+ groups = "uart3";
+ function = "uart3";
+ };
+
+ pinctrl_usb0: usb0_grp {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ pinctrl_usb1: usb1_grp {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ pinctrl_usb2: usb2_grp {
+ groups = "usb2";
+ function = "usb2";
+ };
+
+ pinctrl_usb3: usb3_grp {
+ groups = "usb3";
+ function = "usb3";
+ };
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
new file mode 100644
index 000000000000..4c7b24611012
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,proxstream2";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <88900000>;
+ };
+
+ i2c_clk: i2c_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ interrupts = <0 35 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ interrupts = <0 37 4>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ interrupts = <0 177 4>;
+ clocks = <&uart_clk>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ interrupts = <0 41 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ interrupts = <0 42 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ interrupts = <0 44 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c4: i2c@58784000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58784000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ /* chip-internal connection for STM */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ compatible = "socionext,proxstream2-pinctrl", "syscon";
+ reg = <0x5f801000 0xe00>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0xf04>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0xf04>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000000..3d29d2806cc0
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device Tree Source for UniPhier Reference Daughter Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c0 {
+ eeprom {
+ compatible = "microchip,24lc128";
+ reg = <0x50>;
+ };
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 2efb2058ba49..21b02874bea3 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -101,6 +101,8 @@
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
/* PCI-E I2C bus */
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index cb3090f919a7..e712c0af149b 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -100,6 +100,8 @@
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
/* PCI-E I2C bus */
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 606753eb72c8..ed65e0f7dfc0 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -9,7 +9,7 @@
/ {
chosen {
- bootargs = "console=ttyLP0,115200";
+ stdout-path = "serial0:115200n8";
};
clk16m: clk16m {
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa335166be7..6865137fd114 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -226,7 +226,10 @@
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
};
wdoga5: wdog@4003e000 {
@@ -242,7 +245,8 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
- reg = <0x40044000 0x1000>;
+ reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
@@ -347,6 +351,20 @@
status = "disabled";
};
+ i2c1: i2c@40067000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40067000 0x1000>;
+ interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C1>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 52>,
+ <&edma0 0 53>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
clks: ccm@4006b000 {
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
@@ -404,14 +422,13 @@
};
snvs0: snvs@400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp@34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ regmap = <&snvs0>;
+ offset = <0x34>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
@@ -442,9 +459,23 @@
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
+ #io-channel-cells = <1>;
status = "disabled";
};
+ esdhc0: esdhc@400b1000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b1000 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC0>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ };
+
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
@@ -488,6 +519,19 @@
status = "disabled";
};
+ qspi1: quadspi@400c4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_QSPI1_EN>,
+ <&clks VF610_CLK_QSPI1>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
@@ -520,6 +564,33 @@
status = "disabled";
};
+ i2c2: i2c@400e6000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x400e6000 0x1000>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C2>;
+ clock-names = "ipg";
+ dmas = <&edma0 1 36>,
+ <&edma0 1 37>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@400e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x400e7000 0x1000>;
+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C3>;
+ clock-names = "ipg";
+ dmas = <&edma0 1 38>,
+ <&edma0 1 39>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 06915080b875..dc0457e40775 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -57,7 +57,7 @@
regulator-always-on;
};
- amba {
+ amba: amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -139,6 +139,7 @@
L2: cache-controller@f8f02000 {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
+ interrupts = <0 2 4>;
arm,data-latency = <3 2 2>;
arm,tag-latency = <2 2 2>;
cache-unified;
@@ -258,6 +259,13 @@
reg = <0x100 0x100>;
};
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
pinctrl0: pinctrl@700 {
compatible = "xlnx,pinctrl-zynq";
reg = <0x700 0x200>;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index fb59d34e8ee6..5df8f81f4217 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -34,6 +34,27 @@
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw14 {
+ label = "sw14";
+ gpios = <&gpio0 12 0>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ sw13 {
+ label = "sw13";
+ gpios = <&gpio0 14 0>;
+ linux,code = <103>; /* up */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -50,6 +71,13 @@
};
};
+&amba {
+ ocm: sram@fffc0000 {
+ compatible = "mmio-sram";
+ reg = <0xfffc0000 0x10000>;
+ };
+};
+
&can0 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index ac521e764d10..b001f7ae67f3 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_HID_GENERIC=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 1a352f561113..ea56397599c2 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -14,9 +14,18 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/ti_wilink_st.h>
+#include <linux/wl12xx.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
+#include <linux/platform_data/wkup_m3.h>
+
+#include <asm/siginfo.h>
+#include <asm/signal.h>
#include "common.h"
#include "common-board-devices.h"
@@ -25,6 +34,7 @@
#include "omap_device.h"
#include "omap-secure.h"
#include "soc.h"
+#include "hsmmc.h"
struct pdata_init {
const char *compatible;
@@ -268,8 +278,136 @@ static void __init omap3_tao3530_legacy_init(void)
{
hsmmc2_internal_input_clk();
}
+
+/* omap3pandora legacy devices */
+#define PANDORA_WIFI_IRQ_GPIO 21
+#define PANDORA_WIFI_NRESET_GPIO 23
+
+static struct platform_device pandora_backlight = {
+ .name = "pandora-backlight",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
+
+static struct regulator_init_data pandora_vmmc3 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
+ .consumer_supplies = pandora_vmmc3_supply,
+};
+
+static struct fixed_voltage_config pandora_vwlan = {
+ .supply_name = "vwlan",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = PANDORA_WIFI_NRESET_GPIO,
+ .startup_delay = 50000, /* 50ms */
+ .enable_high = 1,
+ .init_data = &pandora_vmmc3,
+};
+
+static struct platform_device pandora_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &pandora_vwlan,
+ },
+};
+
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this information to
+ * SDIO core because it can't be probed by normal methods.
+ */
+ if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 24000000;
+ card->ocr = 0x80;
+ }
+}
+
+static struct omap2_hsmmc_info pandora_mmc3[] = {
+ {
+ .mmc = 3,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .init_card = pandora_wl1251_init_card,
+ },
+ {} /* Terminator */
+};
+
+static void __init pandora_wl1251_init(void)
+{
+ struct wl1251_platform_data pandora_wl1251_pdata;
+ int ret;
+
+ memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+
+ pandora_wl1251_pdata.power_gpio = -1;
+
+ ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
+ if (ret < 0)
+ goto fail;
+
+ pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+ if (pandora_wl1251_pdata.irq < 0)
+ goto fail_irq;
+
+ pandora_wl1251_pdata.use_eeprom = true;
+ ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
+ if (ret < 0)
+ goto fail_irq;
+
+ return;
+
+fail_irq:
+ gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+ pr_err("wl1251 board initialisation failed\n");
+}
+
+static void __init omap3_pandora_legacy_init(void)
+{
+ platform_device_register(&pandora_backlight);
+ platform_device_register(&pandora_vwlan_device);
+ omap_hsmmc_init(pandora_mmc3);
+ omap_hsmmc_late_init(pandora_mmc3);
+ pandora_wl1251_init();
+}
#endif /* CONFIG_ARCH_OMAP3 */
+#ifdef CONFIG_SOC_TI81XX
+static int fault_fixed_up;
+
+static int t410_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
+ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+ addr, fsr);
+ fault_fixed_up = 1;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __init t410_abort_init(void)
+{
+ hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
+ "imprecise external abort");
+}
+#endif
+
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
@@ -278,6 +416,14 @@ static struct iommu_platform_data omap4_iommu_pdata = {
};
#endif
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+static struct wkup_m3_platform_data wkup_m3_data = {
+ .reset_name = "wkup_m3",
+ .assert_reset = omap_device_assert_hardreset,
+ .deassert_reset = omap_device_deassert_hardreset,
+};
+#endif
+
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
@@ -340,6 +486,10 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
+#ifdef CONFIG_SOC_AM33XX
+ OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+ &wkup_m3_data),
+#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
@@ -353,6 +503,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
+ OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
+ &wkup_m3_data),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
@@ -381,6 +533,11 @@ static struct pdata_init pdata_quirks[] __initdata = {
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
+ { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
+ { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { "hp,t410", t410_abort_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2412efb6cdd9..08d2be2ea41f 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL
Buffalo Linkstation Live v3 (LS-CHL) platform.
config MACH_LINKSTATION_MINI
- bool "Buffalo Linkstation Mini"
- select I2C_BOARDINFO
+ bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
help
Say 'Y' here if you want your kernel to support the
- Buffalo Linkstation Mini platform.
+ Buffalo Linkstation Mini (LS-WSGL) platform.
config MACH_LINKSTATION_LS_HGL
bool "Buffalo Linkstation LS-HGL"
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a40b5c9a58c4..a1e0fbe6a7a1 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
deleted file mode 100644
index a6493e76f96d..000000000000
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * arch/arm/mach-orion5x/lsmini-setup.c
- *
- * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation Mini Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSMINI_NOR_BOOT_BASE 0xf4000000
-#define LSMINI_NOR_BOOT_SIZE SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lsmini_nor_flash_data = {
- .width = 1,
-};
-
-static struct resource lsmini_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = LSMINI_NOR_BOOT_BASE,
- .end = LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lsmini_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &lsmini_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &lsmini_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lsmini_eth_data = {
- .phy_addr = 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lsmini_i2c_rtc = {
- I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSMINI_GPIO_LED_ALARM 2
-#define LSMINI_GPIO_LED_INFO 3
-#define LSMINI_GPIO_LED_FUNC 9
-#define LSMINI_GPIO_LED_PWR 14
-
-static struct gpio_led lsmini_led_pins[] = {
- {
- .name = "alarm:red",
- .gpio = LSMINI_GPIO_LED_ALARM,
- .active_low = 1,
- }, {
- .name = "info:amber",
- .gpio = LSMINI_GPIO_LED_INFO,
- .active_low = 1,
- }, {
- .name = "func:blue:top",
- .gpio = LSMINI_GPIO_LED_FUNC,
- .active_low = 1,
- }, {
- .name = "power:blue:bottom",
- .gpio = LSMINI_GPIO_LED_PWR,
- },
-};
-
-static struct gpio_led_platform_data lsmini_led_data = {
- .leds = lsmini_led_pins,
- .num_leds = ARRAY_SIZE(lsmini_led_pins),
-};
-
-static struct platform_device lsmini_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &lsmini_led_data,
- },
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-
-#define LSMINI_GPIO_KEY_FUNC 15
-#define LSMINI_GPIO_KEY_POWER 18
-#define LSMINI_GPIO_KEY_AUTOPOWER 17
-
-#define LSMINI_SW_POWER 0x00
-#define LSMINI_SW_AUTOPOWER 0x01
-
-static struct gpio_keys_button lsmini_buttons[] = {
- {
- .code = KEY_OPTION,
- .gpio = LSMINI_GPIO_KEY_FUNC,
- .desc = "Function Button",
- .active_low = 1,
- }, {
- .type = EV_SW,
- .code = LSMINI_SW_POWER,
- .gpio = LSMINI_GPIO_KEY_POWER,
- .desc = "Power-on Switch",
- .active_low = 1,
- }, {
- .type = EV_SW,
- .code = LSMINI_SW_AUTOPOWER,
- .gpio = LSMINI_GPIO_KEY_AUTOPOWER,
- .desc = "Power-auto Switch",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data lsmini_button_data = {
- .buttons = lsmini_buttons,
- .nbuttons = ARRAY_SIZE(lsmini_buttons),
-};
-
-static struct platform_device lsmini_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &lsmini_button_data,
- },
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lsmini_sata_data = {
- .n_ports = 2,
-};
-
-
-/*****************************************************************************
- * Linkstation Mini specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation Mini, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- * to move the switch to ON position
- */
-
-static void lsmini_power_off(void)
-{
- orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LSMINI_GPIO_USB_POWER 16
-#define LSMINI_GPIO_AUTO_POWER 17
-#define LSMINI_GPIO_POWER 18
-
-#define LSMINI_GPIO_HDD_POWER0 1
-#define LSMINI_GPIO_HDD_POWER1 19
-
-static unsigned int lsmini_mpp_modes[] __initdata = {
- MPP0_UNUSED, /* LED_RESERVE1 (unused) */
- MPP1_GPIO, /* HDD_PWR */
- MPP2_GPIO, /* LED_ALARM */
- MPP3_GPIO, /* LED_INFO */
- MPP4_UNUSED,
- MPP5_UNUSED,
- MPP6_UNUSED,
- MPP7_UNUSED,
- MPP8_UNUSED,
- MPP9_GPIO, /* LED_FUNC */
- MPP10_UNUSED,
- MPP11_UNUSED, /* LED_ETH (dummy) */
- MPP12_UNUSED,
- MPP13_UNUSED,
- MPP14_GPIO, /* LED_PWR */
- MPP15_GPIO, /* FUNC */
- MPP16_GPIO, /* USB_PWR */
- MPP17_GPIO, /* AUTO_POWER */
- MPP18_GPIO, /* POWER */
- MPP19_GPIO, /* HDD_PWR1 */
- 0,
-};
-
-static void __init lsmini_init(void)
-{
- /*
- * Setup basic Orion functions. Need to be called early.
- */
- orion5x_init();
-
- orion5x_mpp_conf(lsmini_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_ehci1_init();
- orion5x_eth_init(&lsmini_eth_data);
- orion5x_i2c_init();
- orion5x_sata_init(&lsmini_sata_data);
- orion5x_uart0_init();
- orion5x_xor_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- LSMINI_NOR_BOOT_BASE,
- LSMINI_NOR_BOOT_SIZE);
- platform_device_register(&lsmini_nor_flash);
-
- platform_device_register(&lsmini_button_device);
-
- platform_device_register(&lsmini_leds);
-
- i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
-
- /* enable USB power */
- gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
-
- /* register power-off method */
- pm_power_off = lsmini_power_off;
-
- pr_info("%s: finished\n", __func__);
-}
-
-#ifdef CONFIG_MACH_LINKSTATION_MINI
-MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
- /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .atag_offset = 0x100,
- .init_machine = lsmini_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
-#endif
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 72411fbcb6f3..097fc90bf19a 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -74,6 +74,7 @@ static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_24mhz", "clk_24mhz"),
DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
+ DT_CLK(NULL, "dpll_clksel_mac_clk", "dpll_clksel_mac_clk"),
DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"),
DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"),
DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"),
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index 0f982b829be1..0fd7fd2b0f72 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -624,6 +624,22 @@ static struct pinctrl_desc tegra_pinctrl_desc = {
.owner = THIS_MODULE,
};
+static bool gpio_node_has_range(void)
+{
+ struct device_node *np;
+ bool has_prop = false;
+
+ np = of_find_compatible_node(NULL, NULL, "nvidia,tegra30-gpio");
+ if (!np)
+ return has_prop;
+
+ has_prop = of_find_property(np, "gpio-ranges", NULL);
+
+ of_node_put(np);
+
+ return has_prop;
+}
+
int tegra_pinctrl_probe(struct platform_device *pdev,
const struct tegra_pinctrl_soc_data *soc_data)
{
@@ -708,7 +724,8 @@ int tegra_pinctrl_probe(struct platform_device *pdev,
return PTR_ERR(pmx->pctl);
}
- pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
+ if (!gpio_node_has_range())
+ pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
platform_set_drvdata(pdev, pmx);
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index ff7ca3584e16..7b1ad8922eec 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -108,6 +108,7 @@
#define R8A7790_CLK_VIN2 9
#define R8A7790_CLK_VIN1 10
#define R8A7790_CLK_VIN0 11
+#define R8A7790_CLK_ETHERAVB 12
#define R8A7790_CLK_ETHER 13
#define R8A7790_CLK_SATA1 14
#define R8A7790_CLK_SATA0 15
@@ -143,6 +144,8 @@
#define R8A7790_CLK_SCU_ALL 17
#define R8A7790_CLK_SCU_DVC1 18
#define R8A7790_CLK_SCU_DVC0 19
+#define R8A7790_CLK_SCU_CTU1_MIX1 20
+#define R8A7790_CLK_SCU_CTU0_MIX0 21
#define R8A7790_CLK_SCU_SRC9 22
#define R8A7790_CLK_SCU_SRC8 23
#define R8A7790_CLK_SCU_SRC7 24
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index 402268384b99..dd09b73c4aaf 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -141,6 +141,8 @@
#define R8A7791_CLK_SCU_ALL 17
#define R8A7791_CLK_SCU_DVC1 18
#define R8A7791_CLK_SCU_DVC0 19
+#define R8A7791_CLK_SCU_CTU1_MIX1 20
+#define R8A7791_CLK_SCU_CTU0_MIX0 21
#define R8A7791_CLK_SCU_SRC9 22
#define R8A7791_CLK_SCU_SRC8 23
#define R8A7791_CLK_SCU_SRC7 24
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
new file mode 100644
index 000000000000..1579e07f96a3
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -0,0 +1,164 @@
+/*
+ * r8a7793 clock definition
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__
+#define __DT_BINDINGS_CLOCK_R8A7793_H__
+
+/* CPG */
+#define R8A7793_CLK_MAIN 0
+#define R8A7793_CLK_PLL0 1
+#define R8A7793_CLK_PLL1 2
+#define R8A7793_CLK_PLL3 3
+#define R8A7793_CLK_LB 4
+#define R8A7793_CLK_QSPI 5
+#define R8A7793_CLK_SDH 6
+#define R8A7793_CLK_SD0 7
+#define R8A7793_CLK_Z 8
+#define R8A7793_CLK_RCAN 9
+#define R8A7793_CLK_ADSP 10
+
+/* MSTP0 */
+#define R8A7793_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7793_CLK_VCP0 1
+#define R8A7793_CLK_VPC0 3
+#define R8A7793_CLK_SSP1 9
+#define R8A7793_CLK_TMU1 11
+#define R8A7793_CLK_3DG 12
+#define R8A7793_CLK_2DDMAC 15
+#define R8A7793_CLK_FDP1_1 18
+#define R8A7793_CLK_FDP1_0 19
+#define R8A7793_CLK_TMU3 21
+#define R8A7793_CLK_TMU2 22
+#define R8A7793_CLK_CMT0 24
+#define R8A7793_CLK_TMU0 25
+#define R8A7793_CLK_VSP1_DU1 27
+#define R8A7793_CLK_VSP1_DU0 28
+#define R8A7793_CLK_VSP1_S 31
+
+/* MSTP2 */
+#define R8A7793_CLK_SCIFA2 2
+#define R8A7793_CLK_SCIFA1 3
+#define R8A7793_CLK_SCIFA0 4
+#define R8A7793_CLK_MSIOF2 5
+#define R8A7793_CLK_SCIFB0 6
+#define R8A7793_CLK_SCIFB1 7
+#define R8A7793_CLK_MSIOF1 8
+#define R8A7793_CLK_SCIFB2 16
+#define R8A7793_CLK_SYS_DMAC1 18
+#define R8A7793_CLK_SYS_DMAC0 19
+
+/* MSTP3 */
+#define R8A7793_CLK_TPU0 4
+#define R8A7793_CLK_SDHI2 11
+#define R8A7793_CLK_SDHI1 12
+#define R8A7793_CLK_SDHI0 14
+#define R8A7793_CLK_MMCIF0 15
+#define R8A7793_CLK_IIC0 18
+#define R8A7793_CLK_PCIEC 19
+#define R8A7793_CLK_IIC1 23
+#define R8A7793_CLK_SSUSB 28
+#define R8A7793_CLK_CMT1 29
+#define R8A7793_CLK_USBDMAC0 30
+#define R8A7793_CLK_USBDMAC1 31
+
+/* MSTP4 */
+#define R8A7793_CLK_IRQC 7
+
+/* MSTP5 */
+#define R8A7793_CLK_AUDIO_DMAC1 1
+#define R8A7793_CLK_AUDIO_DMAC0 2
+#define R8A7793_CLK_ADSP_MOD 6
+#define R8A7793_CLK_THERMAL 22
+#define R8A7793_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7793_CLK_EHCI 3
+#define R8A7793_CLK_HSUSB 4
+#define R8A7793_CLK_HSCIF2 13
+#define R8A7793_CLK_SCIF5 14
+#define R8A7793_CLK_SCIF4 15
+#define R8A7793_CLK_HSCIF1 16
+#define R8A7793_CLK_HSCIF0 17
+#define R8A7793_CLK_SCIF3 18
+#define R8A7793_CLK_SCIF2 19
+#define R8A7793_CLK_SCIF1 20
+#define R8A7793_CLK_SCIF0 21
+#define R8A7793_CLK_DU1 23
+#define R8A7793_CLK_DU0 24
+#define R8A7793_CLK_LVDS0 26
+
+/* MSTP8 */
+#define R8A7793_CLK_IPMMU_SGX 0
+#define R8A7793_CLK_VIN2 9
+#define R8A7793_CLK_VIN1 10
+#define R8A7793_CLK_VIN0 11
+#define R8A7793_CLK_ETHER 13
+#define R8A7793_CLK_SATA1 14
+#define R8A7793_CLK_SATA0 15
+
+/* MSTP9 */
+#define R8A7793_CLK_GPIO7 4
+#define R8A7793_CLK_GPIO6 5
+#define R8A7793_CLK_GPIO5 7
+#define R8A7793_CLK_GPIO4 8
+#define R8A7793_CLK_GPIO3 9
+#define R8A7793_CLK_GPIO2 10
+#define R8A7793_CLK_GPIO1 11
+#define R8A7793_CLK_GPIO0 12
+#define R8A7793_CLK_RCAN1 15
+#define R8A7793_CLK_RCAN0 16
+#define R8A7793_CLK_QSPI_MOD 17
+#define R8A7793_CLK_I2C5 25
+#define R8A7793_CLK_IICDVFS 26
+#define R8A7793_CLK_I2C4 27
+#define R8A7793_CLK_I2C3 28
+#define R8A7793_CLK_I2C2 29
+#define R8A7793_CLK_I2C1 30
+#define R8A7793_CLK_I2C0 31
+
+/* MSTP10 */
+#define R8A7793_CLK_SSI_ALL 5
+#define R8A7793_CLK_SSI9 6
+#define R8A7793_CLK_SSI8 7
+#define R8A7793_CLK_SSI7 8
+#define R8A7793_CLK_SSI6 9
+#define R8A7793_CLK_SSI5 10
+#define R8A7793_CLK_SSI4 11
+#define R8A7793_CLK_SSI3 12
+#define R8A7793_CLK_SSI2 13
+#define R8A7793_CLK_SSI1 14
+#define R8A7793_CLK_SSI0 15
+#define R8A7793_CLK_SCU_ALL 17
+#define R8A7793_CLK_SCU_DVC1 18
+#define R8A7793_CLK_SCU_DVC0 19
+#define R8A7793_CLK_SCU_SRC9 22
+#define R8A7793_CLK_SCU_SRC8 23
+#define R8A7793_CLK_SCU_SRC7 24
+#define R8A7793_CLK_SCU_SRC6 25
+#define R8A7793_CLK_SCU_SRC5 26
+#define R8A7793_CLK_SCU_SRC4 27
+#define R8A7793_CLK_SCU_SRC3 28
+#define R8A7793_CLK_SCU_SRC2 29
+#define R8A7793_CLK_SCU_SRC1 30
+#define R8A7793_CLK_SCU_SRC0 31
+
+/* MSTP11 */
+#define R8A7793_CLK_SCIFA3 6
+#define R8A7793_CLK_SCIFA4 7
+#define R8A7793_CLK_SCIFA5 8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index b00bbc9c60b4..774dc1e843c5 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -14,6 +14,7 @@
#define MUX_MODE6 6
#define MUX_MODE7 7
#define MUX_MODE8 8
+#define MUX_MODE9 9
#define PULL_DISABLE (1 << 16)
#define PULL_UP (1 << 17)
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 7448edff4723..4379e29f0460 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -30,6 +30,26 @@
#define MUX_MODE14 0xe
#define MUX_MODE15 0xf
+/* Certain pins need virtual mode, but note: they may glitch */
+#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4))
+#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4))
+#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4))
+#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4))
+#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4))
+#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4))
+#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4))
+#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4))
+#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4))
+#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4))
+#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4))
+#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4))
+#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4))
+#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4))
+#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4))
+#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4))
+
+#define MODE_SELECT (1 << 8)
+
#define PULL_ENA (0 << 16)
#define PULL_DIS (1 << 16)
#define PULL_UP (1 << 17)
diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h
new file mode 100644
index 000000000000..acb0bbf4f9f5
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
+
+/* MPUMODRST */
+#define CPU0_RESET 0
+#define CPU1_RESET 1
+#define WDS_RESET 2
+#define SCUPER_RESET 3
+
+/* PER0MODRST */
+#define EMAC0_RESET 32
+#define EMAC1_RESET 33
+#define EMAC2_RESET 34
+#define USB0_RESET 35
+#define USB1_RESET 36
+#define NAND_RESET 37
+#define QSPI_RESET 38
+#define SDMMC_RESET 39
+#define EMAC0_OCP_RESET 40
+#define EMAC1_OCP_RESET 41
+#define EMAC2_OCP_RESET 42
+#define USB0_OCP_RESET 43
+#define USB1_OCP_RESET 44
+#define NAND_OCP_RESET 45
+#define QSPI_OCP_RESET 46
+#define SDMMC_OCP_RESET 47
+#define DMA_RESET 48
+#define SPIM0_RESET 49
+#define SPIM1_RESET 50
+#define SPIS0_RESET 51
+#define SPIS1_RESET 52
+#define DMA_OCP_RESET 53
+#define EMAC_PTP_RESET 54
+/* 55 is empty*/
+#define DMAIF0_RESET 56
+#define DMAIF1_RESET 57
+#define DMAIF2_RESET 58
+#define DMAIF3_RESET 59
+#define DMAIF4_RESET 60
+#define DMAIF5_RESET 61
+#define DMAIF6_RESET 62
+#define DMAIF7_RESET 63
+
+/* PER1MODRST */
+#define L4WD0_RESET 64
+#define L4WD1_RESET 65
+#define L4SYSTIMER0_RESET 66
+#define L4SYSTIMER1_RESET 67
+#define SPTIMER0_RESET 68
+#define SPTIMER1_RESET 69
+/* 70-71 is reserved */
+#define I2C0_RESET 72
+#define I2C1_RESET 73
+#define I2C2_RESET 74
+#define I2C3_RESET 75
+#define I2C4_RESET 76
+/* 77-79 is reserved */
+#define UART0_RESET 80
+#define UART1_RESET 81
+/* 82-87 is reserved */
+#define GPIO0_RESET 88
+#define GPIO1_RESET 89
+#define GPIO2_RESET 90
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET 96
+#define LWHPS2FPGA_RESET 97
+#define FPGA2HPS_RESET 98
+#define F2SSDRAM0_RESET 99
+#define F2SSDRAM1_RESET 100
+#define F2SSDRAM2_RESET 101
+#define DDRSCH_RESET 102
+
+/* SYSMODRST*/
+#define ROM_RESET 128
+#define OCRAM_RESET 129
+/* 130 is reserved */
+#define FPGAMGR_RESET 131
+#define S2F_RESET 132
+#define SYSDBG_RESET 133
+#define OCRAM_OCP_RESET 134
+
+/* COLDMODRST */
+#define CLKMGRCOLD_RESET 160
+/* 161-162 is reserved */
+#define S2FCOLD_RESET 163
+#define TIMESTAMPCOLD_RESET 164
+#define TAPCOLD_RESET 165
+#define HMCCOLD_RESET 166
+#define IOMGRCOLD_RESET 167
+
+/* NRSTMODRST */
+#define NRSTPINOE_RESET 192
+
+/* DBGMODRST */
+#define DBG_RESET 224
+#endif