diff options
28 files changed, 411 insertions, 204 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec index 0e95c2ca105c..6158f831c761 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -18,11 +18,11 @@ Description: values are 'base' and 'lid'. What: /sys/bus/iio/devices/iio:deviceX/id -Date: Septembre 2017 +Date: September 2017 KernelVersion: 4.14 Contact: linux-iio@vger.kernel.org Description: - This attribute is exposed by the CrOS EC legacy accelerometer - driver and represents the sensor ID as exposed by the EC. This - ID is used by the Android sensor service hardware abstraction - layer (sensor HAL) through the Android container on ChromeOS. + This attribute is exposed by the CrOS EC sensors driver and + represents the sensor ID as exposed by the EC. This ID is used + by the Android sensor service hardware abstraction layer (sensor + HAL) through the Android container on ChromeOS. diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml new file mode 100644 index 000000000000..7ba167e2e1ea --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl345.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports + both I2C & SPI interfaces. + http://www.analog.com/en/products/mems/accelerometers/adxl345.html + http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html + +properties: + compatible: + enum: + - adi,adxl345 + - adi,adxl375 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@2a { + compatible = "adi,adxl345"; + reg = <0x53>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "adi,adxl345"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt deleted file mode 100644 index f9525f6e3d43..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/adxl345.txt +++ /dev/null @@ -1,39 +0,0 @@ -Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers - -http://www.analog.com/en/products/mems/accelerometers/adxl345.html -http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html - -Required properties: - - compatible : should be one of - "adi,adxl345" - "adi,adxl375" - - reg : the I2C address or SPI chip select number of the sensor - -Required properties for SPI bus usage: - - spi-max-frequency : set maximum clock frequency, must be 5000000 - - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3 - -Optional properties: - - interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example for a I2C device node: - - accelerometer@2a { - compatible = "adi,adxl345"; - reg = <0x53>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - -Example for a SPI device node: - - accelerometer@0 { - compatible = "adi,adxl345"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 0df9befdaecc..78c06e05c8e5 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -13,8 +13,10 @@ Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs - "mediatek,mt2712-auxadc": For MT2712 family of SoCs + - "mediatek,mt6765-auxadc": For MT6765 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs + - "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc": For MT8183 family of SoCs - reg: Address range of the AUXADC unit. - clocks: Should contain a clock specifier for each entry in clock-names - clock-names: Should contain "main". diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt deleted file mode 100644 index b9bbde3e13ed..000000000000 --- a/Documentation/devicetree/bindings/iio/light/isl29018.txt +++ /dev/null @@ -1,27 +0,0 @@ -* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor - -Required properties: - - - compatible: Should be one of - "isil,isl29018" - "isil,isl29023" - "isil,isl29035" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -isl29018@44 { - compatible = "isil,isl29018"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml new file mode 100644 index 000000000000..cbb00be8f359 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/isl29018.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient and infrared light sensing with proximity detection over an i2c + interface. + + https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf + https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf + +properties: + compatible: + enum: + - isil,isl29018 + - isil,isl29023 + - isil,isl29035 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt b/Documentation/devicetree/bindings/iio/light/tsl2583.txt deleted file mode 100644 index 059dffa1829a..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.txt +++ /dev/null @@ -1,25 +0,0 @@ -* TAOS TSL 2580/2581/2583 ALS sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2580" - "amstaos,tsl2581" - "amstaos,tsl2583" - - reg: the I2C address of the device - -Optional properties: - - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - - - vcc-supply: phandle to the regulator that provides power to the sensor. - -Example: - -tsl2581@29 { - compatible = "amstaos,tsl2581"; - reg = <0x29>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml new file mode 100644 index 000000000000..e86ef64ecf03 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2580 + - amstaos,tsl2581 + - amstaos,tsl2583 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt deleted file mode 100644 index 1c5e6f17a1df..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt +++ /dev/null @@ -1,42 +0,0 @@ -* AMS/TAOS ALS and proximity sensor - -Required properties: - - - compatible: Should be one of - "amstaos,tsl2571" - "amstaos,tsl2671" - "amstaos,tmd2671" - "amstaos,tsl2771" - "amstaos,tmd2771" - "amstaos,tsl2572" - "amstaos,tsl2672" - "amstaos,tmd2672" - "amstaos,tsl2772" - "amstaos,tmd2772" - "avago,apds9930" - - reg: the I2C address of the device - -Optional properties: - - - amstaos,proximity-diodes - proximity diodes to enable. <0>, <1>, or <0 1> - are the only valid values. - - led-max-microamp - current for the proximity LED. Must be 100000, 50000, - 25000, or 13000. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - - interrupts: the sole interrupt generated by the device - - Refer to interrupt-controller/interrupts.txt for generic interrupt client - node bindings. - -Example: - -tsl2772@39 { - compatible = "amstaos,tsl2772"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - amstaos,proximity-diodes = <0>; - led-max-microamp = <100000>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml new file mode 100644 index 000000000000..ed2c3d5eadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + Ambient light sensing and proximity detection with an i2c interface. + https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf + +properties: + compatible: + enum: + - amstaos,tsl2571 + - amstaos,tsl2671 + - amstaos,tmd2671 + - amstaos,tsl2771 + - amstaos,tmd2771 + - amstaos,tsl2572 + - amstaos,tsl2672 + - amstaos,tmd2672 + - amstaos,tsl2772 + - amstaos,tmd2772 + - avago,apds9930 + + reg: + maxItems: 1 + + amstaos,proximity-diodes: + description: Proximity diodes to enable + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + interrupts: + maxItems: 1 + + led-max-microamp: + description: Current for the proximity LED + enum: + - 13000 + - 25000 + - 50000 + - 100000 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@39 { + compatible = "amstaos,tsl2772"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + amstaos,proximity-diodes = <0>; + led-max-microamp = <100000>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 5cfbea4ce575..ddb729ff0e77 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -551,6 +551,7 @@ W: http://wiki.analog.com/ADXL345 W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/input/misc/adxl34x.c +F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER M: Stefan Popa <stefan.popa@analog.com> diff --git a/drivers/iio/accel/adxl372_spi.c b/drivers/iio/accel/adxl372_spi.c index e14e655ef165..3ef7e3a4804e 100644 --- a/drivers/iio/accel/adxl372_spi.c +++ b/drivers/iio/accel/adxl372_spi.c @@ -7,6 +7,8 @@ #include <linux/module.h> #include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include "adxl372.h" @@ -37,9 +39,16 @@ static const struct spi_device_id adxl372_spi_id[] = { }; MODULE_DEVICE_TABLE(spi, adxl372_spi_id); +static const struct of_device_id adxl372_of_match[] = { + { .compatible = "adi,adxl372" }, + { }, +}; +MODULE_DEVICE_TABLE(of, adxl372_of_match); + static struct spi_driver adxl372_spi_driver = { .driver = { .name = "adxl372_spi", + .of_match_table = adxl372_of_match, }, .probe = adxl372_spi_probe, .id_table = adxl372_spi_id, diff --git a/drivers/iio/accel/kxsd9-spi.c b/drivers/iio/accel/kxsd9-spi.c index b7d0078fd00e..3027917410f2 100644 --- a/drivers/iio/accel/kxsd9-spi.c +++ b/drivers/iio/accel/kxsd9-spi.c @@ -1,5 +1,7 @@ #include <linux/device.h> #include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/module.h> #include <linux/slab.h> @@ -40,10 +42,17 @@ static const struct spi_device_id kxsd9_spi_id[] = { }; MODULE_DEVICE_TABLE(spi, kxsd9_spi_id); +static const struct of_device_id kxsd9_of_match[] = { + { .compatible = "kionix,kxsd9" }, + { }, +}; +MODULE_DEVICE_TABLE(of, kxsd9_of_match); + static struct spi_driver kxsd9_spi_driver = { .driver = { .name = "kxsd9", .pm = &kxsd9_dev_pm_ops, + .of_match_table = kxsd9_of_match, }, .probe = kxsd9_spi_probe, .remove = kxsd9_spi_remove, diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index d5ea84cf6460..a3a4ca946308 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -1586,8 +1586,7 @@ static void at91_adc_hw_init(struct at91_adc_state *st) static ssize_t at91_adc_get_fifo_state(struct device *dev, struct device_attribute *attr, char *buf) { - struct iio_dev *indio_dev = - platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); return scnprintf(buf, PAGE_SIZE, "%d\n", !!st->dma_st.dma_chan); @@ -1596,8 +1595,7 @@ static ssize_t at91_adc_get_fifo_state(struct device *dev, static ssize_t at91_adc_get_watermark(struct device *dev, struct device_attribute *attr, char *buf) { - struct iio_dev *indio_dev = - platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); return scnprintf(buf, PAGE_SIZE, "%d\n", st->dma_st.watermark); @@ -1849,8 +1847,7 @@ static int at91_adc_remove(struct platform_device *pdev) static __maybe_unused int at91_adc_suspend(struct device *dev) { - struct iio_dev *indio_dev = - platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); /* @@ -1870,8 +1867,7 @@ static __maybe_unused int at91_adc_suspend(struct device *dev) static __maybe_unused int at91_adc_resume(struct device *dev) { - struct iio_dev *indio_dev = - platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(indio_dev); int ret; diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 596841a3c4db..1aa8af3491fd 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -1360,7 +1360,7 @@ static int at91_adc_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int at91_adc_suspend(struct device *dev) { - struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *idev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(idev); pinctrl_pm_select_sleep_state(dev); @@ -1371,7 +1371,7 @@ static int at91_adc_suspend(struct device *dev) static int at91_adc_resume(struct device *dev) { - struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev)); + struct iio_dev *idev = dev_get_drvdata(dev); struct at91_adc_state *st = iio_priv(idev); clk_prepare_enable(st->clk); diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c index 95d76abb64ec..e1bdcc0a72a9 100644 --- a/drivers/iio/adc/mt6577_auxadc.c +++ b/drivers/iio/adc/mt6577_auxadc.c @@ -42,10 +42,26 @@ #define MT6577_AUXADC_POWER_READY_MS 1 #define MT6577_AUXADC_SAMPLE_READY_US 25 +struct mtk_auxadc_compatible { + bool sample_data_cali; + bool check_global_idle; +}; + struct mt6577_auxadc_device { void __iomem *reg_base; struct clk *adc_clk; struct mutex lock; + const struct mtk_auxadc_compatible *dev_comp; +}; + +static const struct mtk_auxadc_compatible mt8173_compat = { + .sample_data_cali = false, + .check_global_idle = true, +}; + +static const struct mtk_auxadc_compatible mt6765_compat = { + .sample_data_cali = true, + .check_global_idle = false, }; #define MT6577_AUXADC_CHANNEL(idx) { \ @@ -74,6 +90,11 @@ static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = { MT6577_AUXADC_CHANNEL(15), }; +static int mt_auxadc_get_cali_data(int rawdata, bool enable_cali) +{ + return rawdata; +} + static inline void mt6577_auxadc_mod_reg(void __iomem *reg, u32 or_mask, u32 and_mask) { @@ -120,15 +141,17 @@ static int mt6577_auxadc_read(struct iio_dev *indio_dev, /* we must delay here for hardware sample channel data */ udelay(MT6577_AUXADC_SAMPLE_READY_US); - /* check MTK_AUXADC_CON2 if auxadc is idle */ - ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val, - ((val & MT6577_AUXADC_STA) == 0), - MT6577_AUXADC_SLEEP_US, - MT6577_AUXADC_TIMEOUT_US); - if (ret < 0) { - dev_err(indio_dev->dev.parent, - "wait for auxadc idle time out\n"); - goto err_timeout; + if (adc_dev->dev_comp->check_global_idle) { + /* check MTK_AUXADC_CON2 if auxadc is idle */ + ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, + val, ((val & MT6577_AUXADC_STA) == 0), + MT6577_AUXADC_SLEEP_US, + MT6577_AUXADC_TIMEOUT_US); + if (ret < 0) { + dev_err(indio_dev->dev.parent, + "wait for auxadc idle time out\n"); + goto err_timeout; + } } /* read channel and make sure ready bit == 1 */ @@ -163,6 +186,8 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev, int *val2, long info) { + struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev); + switch (info) { case IIO_CHAN_INFO_PROCESSED: *val = mt6577_auxadc_read(indio_dev, chan); @@ -172,6 +197,8 @@ static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev, chan->channel); return *val; } + if (adc_dev->dev_comp->sample_data_cali) + *val = mt_auxadc_get_cali_data(*val, true); return IIO_VAL_INT; default: @@ -304,10 +331,11 @@ static SIMPLE_DEV_PM_OPS(mt6577_auxadc_pm_ops, mt6577_auxadc_resume); static const struct of_device_id mt6577_auxadc_of_match[] = { - { .compatible = "mediatek,mt2701-auxadc", }, - { .compatible = "mediatek,mt2712-auxadc", }, - { .compatible = "mediatek,mt7622-auxadc", }, - { .compatible = "mediatek,mt8173-auxadc", }, + { .compatible = "mediatek,mt2701-auxadc", .data = &mt8173_compat}, + { .compatible = "mediatek,mt2712-auxadc", .data = &mt8173_compat}, + { .compatible = "mediatek,mt7622-auxadc", .data = &mt8173_compat}, + { .compatible = "mediatek,mt8173-auxadc", .data = &mt8173_compat}, + { .compatible = "mediatek,mt6765-auxadc", .data = &mt6765_compat}, { } }; MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match); diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c index 2c0d0316d149..2d685730f867 100644 --- a/drivers/iio/adc/rcar-gyroadc.c +++ b/drivers/iio/adc/rcar-gyroadc.c @@ -485,10 +485,8 @@ static int rcar_gyroadc_probe(struct platform_device *pdev) int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); - if (!indio_dev) { - dev_err(dev, "Failed to allocate IIO device.\n"); + if (!indio_dev) return -ENOMEM; - } priv = iio_priv(indio_dev); priv->dev = dev; diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 19adc2b23472..588907cc3b6b 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1456,6 +1456,12 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) * So IRQ associated to filter instance 0 is dedicated to the Filter 0. */ irq = platform_get_irq(pdev, 0); + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(dev, "Failed to get IRQ: %d\n", irq); + return irq; + } + ret = devm_request_irq(dev, irq, stm32_dfsdm_irq, 0, pdev->name, adc); if (ret < 0) { diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 0a4d3746d21c..26e2011c5868 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -233,6 +233,8 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev, } priv->dfsdm.phys_base = res->start; priv->dfsdm.base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->dfsdm.base)) + return PTR_ERR(priv->dfsdm.base); /* * "dfsdm" clock is mandatory for DFSDM peripheral clocking. @@ -242,8 +244,10 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev, */ priv->clk = devm_clk_get(&pdev->dev, "dfsdm"); if (IS_ERR(priv->clk)) { - dev_err(&pdev->dev, "No stm32_dfsdm_clk clock found\n"); - return -EINVAL; + ret = PTR_ERR(priv->clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get clock (%d)\n", ret); + return ret; } priv->aclk = devm_clk_get(&pdev->dev, "audio"); diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c index 7921f827c6ec..bd72727fc417 100644 --- a/drivers/iio/adc/stmpe-adc.c +++ b/drivers/iio/adc/stmpe-adc.c @@ -65,6 +65,8 @@ static int stmpe_read_voltage(struct stmpe_adc *info, mutex_lock(&info->lock); + reinit_completion(&info->completion); + info->channel = (u8)chan->channel; if (info->channel > STMPE_ADC_LAST_NR) { @@ -72,23 +74,16 @@ static int stmpe_read_voltage(struct stmpe_adc *info, return -EINVAL; } - stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, - STMPE_ADC_CH(info->channel)); - stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, STMPE_ADC_CH(info->channel)); - *val = info->value; - - ret = wait_for_completion_interruptible_timeout - (&info->completion, STMPE_ADC_TIMEOUT); + ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT); if (ret <= 0) { + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, + STMPE_ADC_CH(info->channel)); mutex_unlock(&info->lock); - if (ret == 0) - return -ETIMEDOUT; - else - return ret; + return -ETIMEDOUT; } *val = info->value; @@ -105,6 +100,8 @@ static int stmpe_read_temp(struct stmpe_adc *info, mutex_lock(&info->lock); + reinit_completion(&info->completion); + info->channel = (u8)chan->channel; if (info->channel != STMPE_TEMP_CHANNEL) { @@ -115,15 +112,11 @@ static int stmpe_read_temp(struct stmpe_adc *info, stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL, STMPE_START_ONE_TEMP_CONV); - ret = wait_for_completion_interruptible_timeout - (&info->completion, STMPE_ADC_TIMEOUT); + ret = wait_for_completion_timeout(&info->completion, STMPE_ADC_TIMEOUT); if (ret <= 0) { mutex_unlock(&info->lock); - if (ret == 0) - return -ETIMEDOUT; - else - return ret; + return -ETIMEDOUT; } /* @@ -331,6 +324,12 @@ static int stmpe_adc_probe(struct platform_device *pdev) if (ret) return ret; + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, + ~(norequest_mask & 0xFF)); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, + ~(norequest_mask & 0xFF)); + return devm_iio_device_register(&pdev->dev, indio_dev); } @@ -353,9 +352,14 @@ static struct platform_driver stmpe_adc_driver = { .pm = &stmpe_adc_pm_ops, }, }; - module_platform_driver(stmpe_adc_driver); +static const struct of_device_id stmpe_adc_ids[] = { + { .compatible = "st,stmpe-adc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stmpe_adc_ids); + MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>"); MODULE_DESCRIPTION("STMPEXXX ADC driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c index 04d7147e0110..f13c6248a662 100644 --- a/drivers/iio/adc/sun4i-gpadc-iio.c +++ b/drivers/iio/adc/sun4i-gpadc-iio.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC * * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com> * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - * * The Allwinner SoCs all have an ADC that can also act as a touchscreen * controller and a thermal sensor. * The thermal sensor works only when the ADC acts as a touchscreen controller diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c index 719a0df5aeeb..130362ca421b 100644 --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c @@ -125,6 +125,15 @@ static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev, return ret ? ret : len; } +static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, char *buf) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + + return snprintf(buf, PAGE_SIZE, "%d\n", st->param.info.sensor_num); +} + static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev, uintptr_t private, const struct iio_chan_spec *chan, char *buf) @@ -141,6 +150,11 @@ const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = { .write = cros_ec_sensors_calibrate }, { + .name = "id", + .shared = IIO_SHARED_BY_ALL, + .read = cros_ec_sensors_id + }, + { .name = "location", .shared = IIO_SHARED_BY_ALL, .read = cros_ec_sensors_loc diff --git a/drivers/iio/dac/ad5758.c b/drivers/iio/dac/ad5758.c index a513c70faefa..475646c82b40 100644 --- a/drivers/iio/dac/ad5758.c +++ b/drivers/iio/dac/ad5758.c @@ -11,6 +11,8 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/property.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/gpio/consumer.h> @@ -582,7 +584,7 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev, { struct ad5758_state *st = iio_priv(indio_dev); bool pwr_down; - unsigned int dc_dc_mode, dac_config_mode, val; + unsigned int dac_config_mode, val; unsigned long int dac_config_msk; int ret; @@ -591,13 +593,10 @@ static ssize_t ad5758_write_powerdown(struct iio_dev *indio_dev, return ret; mutex_lock(&st->lock); - if (pwr_down) { - dc_dc_mode = AD5758_DCDC_MODE_POWER_OFF; + if (pwr_down) val = 0; - } else { - dc_dc_mode = st->dc_dc_mode; + else val = 1; - } dac_config_mode = AD5758_DAC_CONFIG_OUT_EN_MODE(val) | AD5758_DAC_CONFIG_INT_EN_MODE(val); @@ -885,9 +884,16 @@ static const struct spi_device_id ad5758_id[] = { }; MODULE_DEVICE_TABLE(spi, ad5758_id); +static const struct of_device_id ad5758_of_match[] = { + { .compatible = "adi,ad5758" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad5758_of_match); + static struct spi_driver ad5758_driver = { .driver = { .name = KBUILD_MODNAME, + .of_match_table = ad5758_of_match, }, .probe = ad5758_probe, .id_table = ad5758_id, diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c index 883a47562055..2b3ba1a66fe8 100644 --- a/drivers/iio/dac/ds4424.c +++ b/drivers/iio/dac/ds4424.c @@ -236,12 +236,6 @@ static int ds4424_probe(struct i2c_client *client, indio_dev->dev.of_node = client->dev.of_node; indio_dev->dev.parent = &client->dev; - if (!client->dev.of_node) { - dev_err(&client->dev, - "Not found DT.\n"); - return -ENODEV; - } - data->vcc_reg = devm_regulator_get(&client->dev, "vcc"); if (IS_ERR(data->vcc_reg)) { dev_err(&client->dev, diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 9b9eee27176c..ceb1daceeb46 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -862,9 +862,11 @@ static int ad9523_setup(struct iio_dev *indio_dev) if (ret < 0) return ret; - st->vco_freq = (pdata->vcxo_freq * (pdata->pll2_freq_doubler_en ? 2 : 1) - / pdata->pll2_r2_div) * AD9523_PLL2_FB_NDIV(pdata-> - pll2_ndiv_a_cnt, pdata->pll2_ndiv_b_cnt); + st->vco_freq = div_u64((unsigned long long)pdata->vcxo_freq * + (pdata->pll2_freq_doubler_en ? 2 : 1) * + AD9523_PLL2_FB_NDIV(pdata->pll2_ndiv_a_cnt, + pdata->pll2_ndiv_b_cnt), + pdata->pll2_r2_div); ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL, AD9523_PLL2_VCO_CALIBRATE); diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index c31b9633f32d..c613a64c017f 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -10,6 +10,8 @@ #include <linux/init.h> #include <linux/mutex.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> #include <linux/iio/iio.h> #include <linux/iio/trigger.h> @@ -262,9 +264,17 @@ static const struct spi_device_id maxim_thermocouple_id[] = { }; MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id); +static const struct of_device_id maxim_thermocouple_of_match[] = { + { .compatible = "maxim,max6675" }, + { .compatible = "maxim,max31855" }, + { }, +}; +MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match); + static struct spi_driver maxim_thermocouple_driver = { .driver = { .name = MAXIM_THERMOCOUPLE_DRV_NAME, + .of_match_table = maxim_thermocouple_of_match, }, .probe = maxim_thermocouple_probe, .remove = maxim_thermocouple_remove, diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 23d9a655a520..31cd9a12f40f 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -12,6 +12,9 @@ config AD7816 Say yes here to build support for Analog Devices AD7816/7/8 temperature sensors and ADC. + To compile this driver as a module, choose M here: the + module will be called ad7816. + config AD7192 tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" depends on SPI diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c index b6a65ee8d558..37ce563cb0e1 100644 --- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -2154,7 +2154,7 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus, chip->dac_bits = 8; chip->ldac_pin = devm_gpiod_get_optional(dev, "adi,ldac", - GPIOD_OUT_LOW); + GPIOD_OUT_LOW); if (IS_ERR(chip->ldac_pin)) { ret = PTR_ERR(chip->ldac_pin); dev_err(dev, "Failed to request ldac GPIO: %d\n", ret); |