diff options
| -rw-r--r-- | Documentation/devicetree/bindings/display/arm,malidp.txt | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/arm/malidp_drv.c | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/arm/malidp_hw.c | 9 | ||||
| -rw-r--r-- | drivers/gpu/drm/arm/malidp_hw.h | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/arm/malidp_regs.h | 10 |
5 files changed, 31 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt index 2f7870983ef1..7a97a2b48c2a 100644 --- a/Documentation/devicetree/bindings/display/arm,malidp.txt +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt @@ -37,6 +37,8 @@ Optional properties: Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be used for the framebuffer; if not present, the framebuffer may be located anywhere in memory. + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS + levels of DP500's QoS signaling. Example: @@ -54,6 +56,7 @@ Example: clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; port { dp0_output: endpoint { remote-endpoint = <&tda998x_2_input>; diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 333b88a5efb0..8a76315aaa0f 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -817,6 +817,12 @@ static int malidp_bind(struct device *dev) malidp->core_id = version; + ret = of_property_read_u32(dev->of_node, + "arm,malidp-arqos-value", + &hwdev->arqos_value); + if (ret) + hwdev->arqos_value = 0x0; + /* set the number of lines used for output of RGB data */ ret = of_property_read_u8_array(dev->of_node, "arm,malidp-output-port-lines", diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index bd8265f02e0b..ca570b135478 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -379,6 +379,15 @@ static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode * malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC); else malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED, MALIDP_DE_DISPLAY_FUNC); + + /* + * Program the RQoS register to avoid high resolutions flicker + * issue on the LS1028A. + */ + if (hwdev->arqos_value) { + val = hwdev->arqos_value; + malidp_hw_setbits(hwdev, val, MALIDP500_RQOS_QUALITY); + } } int malidp_format_get_bpp(u32 fmt) diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h index 968a65eed371..e4c36bc90bda 100644 --- a/drivers/gpu/drm/arm/malidp_hw.h +++ b/drivers/gpu/drm/arm/malidp_hw.h @@ -251,6 +251,9 @@ struct malidp_hw_device { /* size of memory used for rotating layers, up to two banks available */ u32 rotation_memory[2]; + + /* priority level of RQOS register used for driven the ARQOS signal */ + u32 arqos_value; }; static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg) diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h index 993031542fa1..514c50dcb74d 100644 --- a/drivers/gpu/drm/arm/malidp_regs.h +++ b/drivers/gpu/drm/arm/malidp_regs.h @@ -210,6 +210,16 @@ #define MALIDP500_CONFIG_VALID 0x00f00 #define MALIDP500_CONFIG_ID 0x00fd4 +/* + * The quality of service (QoS) register on the DP500. RQOS register values + * are driven by the ARQOS signal, using AXI transacations, dependent on the + * FIFO input level. + * The RQOS register can also set QoS levels for: + * - RED_ARQOS @ A 4-bit signal value for close to underflow conditions + * - GREEN_ARQOS @ A 4-bit signal value for normal conditions + */ +#define MALIDP500_RQOS_QUALITY 0x00500 + /* register offsets and bits specific to DP550/DP650 */ #define MALIDP550_ADDR_SPACE_SIZE 0x10000 #define MALIDP550_DE_CONTROL 0x00010 |