summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-pxa/Kconfig7
-rw-r--r--arch/arm/mach-pxa/include/mach/arcom-pcmcia.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/viper.h2
-rw-r--r--arch/arm/mach-pxa/viper.c20
-rw-r--r--arch/arm/mach-pxa/zeus.c29
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile2
-rw-r--r--drivers/pcmcia/pxa2xx_base.c3
-rw-r--r--drivers/pcmcia/pxa2xx_viper.c119
9 files changed, 155 insertions, 40 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index fc553e896b1b..e6d8e10ae5d1 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -63,6 +63,7 @@ config ARCH_VIPER
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
+ select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
@@ -70,6 +71,7 @@ config MACH_ARCOM_ZEUS
select ISA
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
+ select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
@@ -186,6 +188,11 @@ config MACH_TRIZEPS_ANY
endchoice
+config ARCOM_PCMCIA
+ bool
+ help
+ Generic option for Arcom Viper/Zeus PCMCIA
+
config TRIZEPS_PCMCIA
bool
help
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
new file mode 100644
index 000000000000..d428be4db44c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
@@ -0,0 +1,11 @@
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+ int cd_gpio;
+ int rdy_gpio;
+ int pwr_gpio;
+ void (*reset)(int state);
+};
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
index 10988c270ca3..5f5fbf1f6489 100644
--- a/arch/arm/mach-pxa/include/mach/viper.h
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -85,8 +85,6 @@
/* Interrupt and Configuration Register (VIPER_ICR) */
/* This is a write only register. Only CF_RST is used under Linux */
-extern void viper_cf_rst(int state);
-
#define VIPER_ICR_RETRIG (1 << 0)
#define VIPER_ICR_AUTO_CLR (1 << 1)
#define VIPER_ICR_R_DIS (1 << 2)
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index cf0d71b7797e..5352b4e5a7dd 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -47,6 +47,7 @@
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
#include <mach/viper.h>
#include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
}
/* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
{
if (state)
viper_icr_set_bit(VIPER_ICR_CF_RST);
else
viper_icr_clear_bit(VIPER_ICR_CF_RST);
}
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+ .cd_gpio = VIPER_CF_CD_GPIO,
+ .rdy_gpio = VIPER_CF_RDY_GPIO,
+ .pwr_gpio = VIPER_CF_POWER_GPIO,
+ .reset = viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+ .name = "viper-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &viper_pcmcia_info,
+ },
+};
/*
* The CPLD version register was not present on VIPER boards prior to
@@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
&viper_mtd_devices[0],
&viper_mtd_devices[1],
&viper_backlight_device,
+ &viper_pcmcia_device,
};
static mfp_cfg_t viper_pin_config[] __initdata = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index ae1c3d2f6d5b..5b986a8bd9e6 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -43,6 +43,7 @@
#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
+#include <mach/arcom-pcmcia.h>
#include <mach/zeus.h>
#include "generic.h"
@@ -428,6 +429,33 @@ static struct platform_device zeus_leds_device = {
},
};
+static void zeus_cf_reset(int state)
+{
+ u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
+
+ if (state)
+ cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
+ else
+ cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
+
+ __raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
+}
+
+static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
+ .cd_gpio = ZEUS_CF_CD_GPIO,
+ .rdy_gpio = ZEUS_CF_RDY_GPIO,
+ .pwr_gpio = ZEUS_CF_PWEN_GPIO,
+ .reset = zeus_cf_reset,
+};
+
+static struct platform_device zeus_pcmcia_device = {
+ .name = "zeus-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &zeus_pcmcia_info,
+ },
+};
+
static struct platform_device *zeus_devices[] __initdata = {
&zeus_serial_device,
&zeus_mtd_devices[0],
@@ -436,6 +464,7 @@ static struct platform_device *zeus_devices[] __initdata = {
&zeus_sram_device,
&pxa2xx_spi_ssp3_device,
&zeus_leds_device,
+ &zeus_pcmcia_device,
};
/* AC'97 */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index cd5082d3ca19..58bee55a3dd3 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -208,7 +208,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 382938313991..83ff802de544 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o
pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o
-pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
+pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 84dde7768ad5..87481ce60dfb 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev)
MECR |= MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
- if ((ops->first + ops->nr) > 1 || machine_is_viper())
+ if ((ops->first + ops->nr) > 1 ||
+ machine_is_viper() || machine_is_arcom_zeus())
MECR |= MECR_NOS;
else
MECR &= ~MECR_NOS;
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 27be2e154df2..a51f2077644a 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -1,9 +1,8 @@
/*
- * VIPER PCMCIA support
+ * Viper/Zeus PCMCIA support
* Copyright 2004 Arcom Control Systems
*
* Maintained by Marc Zyngier <maz@misterjones.org>
- * <marc.zyngier@altran.com>
*
* Based on:
* iPAQ h2200 PCMCIA support
@@ -26,37 +25,47 @@
#include <asm/irq.h>
-#include <mach/viper.h>
-#include <asm/mach-types.h>
+#include <mach/arcom-pcmcia.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
+static struct platform_device *arcom_pcmcia_dev;
+
static struct pcmcia_irqs irqs[] = {
- { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" }
+ {
+ .sock = 0,
+ .str = "PCMCIA_CD",
+ },
};
+static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
+{
+ return arcom_pcmcia_dev->dev.platform_data;
+}
+
static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
unsigned long flags;
- skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+ skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio);
+ irqs[0].irq = gpio_to_irq(pdata->cd_gpio);
- if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
+ if (gpio_request(pdata->cd_gpio, "CF detect"))
goto err_request_cd;
- if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
+ if (gpio_request(pdata->rdy_gpio, "CF ready"))
goto err_request_rdy;
- if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
+ if (gpio_request(pdata->pwr_gpio, "CF power"))
goto err_request_pwr;
local_irq_save(flags);
- /* GPIO 82 is the CF power enable line. initially off */
- if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
- gpio_direction_input(VIPER_CF_CD_GPIO) ||
- gpio_direction_input(VIPER_CF_RDY_GPIO)) {
+ if (gpio_direction_output(pdata->pwr_gpio, 0) ||
+ gpio_direction_input(pdata->cd_gpio) ||
+ gpio_direction_input(pdata->rdy_gpio)) {
local_irq_restore(flags);
goto err_dir;
}
@@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
err_dir:
- gpio_free(VIPER_CF_POWER_GPIO);
+ gpio_free(pdata->pwr_gpio);
err_request_pwr:
- gpio_free(VIPER_CF_RDY_GPIO);
+ gpio_free(pdata->rdy_gpio);
err_request_rdy:
- gpio_free(VIPER_CF_CD_GPIO);
+ gpio_free(pdata->cd_gpio);
err_request_cd:
- printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
+ dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
return -1;
}
@@ -81,17 +90,21 @@ err_request_cd:
*/
static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
- gpio_free(VIPER_CF_POWER_GPIO);
- gpio_free(VIPER_CF_RDY_GPIO);
- gpio_free(VIPER_CF_CD_GPIO);
+ gpio_free(pdata->pwr_gpio);
+ gpio_free(pdata->rdy_gpio);
+ gpio_free(pdata->cd_gpio);
}
static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
- state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+ state->detect = !gpio_get_value(pdata->cd_gpio);
+ state->ready = !!gpio_get_value(pdata->rdy_gpio);
state->bvd1 = 1;
state->bvd2 = 1;
state->wrprot = 0;
@@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
/* Silently ignore Vpp, output enable, speaker enable. */
- viper_cf_rst(state->flags & SS_RESET);
+ pdata->reset(state->flags & SS_RESET);
/* Apply socket voltage */
switch (state->Vcc) {
case 0:
- gpio_set_value(VIPER_CF_POWER_GPIO, 0);
+ gpio_set_value(pdata->pwr_gpio, 0);
break;
case 33:
- gpio_set_value(VIPER_CF_POWER_GPIO, 1);
+ gpio_set_value(pdata->pwr_gpio, 1);
break;
default:
- printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
- __func__, state->Vcc);
+ dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
return -1;
}
@@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
-static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
+static struct pcmcia_low_level viper_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = viper_pcmcia_hw_init,
.hw_shutdown = viper_pcmcia_hw_shutdown,
@@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
static struct platform_device *viper_pcmcia_device;
-static int __init viper_pcmcia_init(void)
+static int viper_pcmcia_probe(struct platform_device *pdev)
{
int ret;
- if (!machine_is_viper())
- return -ENODEV;
+ /* I can't imagine more than one device, but you never know... */
+ if (arcom_pcmcia_dev)
+ return -EEXIST;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!viper_pcmcia_device)
return -ENOMEM;
+ arcom_pcmcia_dev = pdev;
+
+ viper_pcmcia_device->dev.parent = &pdev->dev;
+
ret = platform_device_add_data(viper_pcmcia_device,
&viper_pcmcia_ops,
sizeof(viper_pcmcia_ops));
@@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void)
if (!ret)
ret = platform_device_add(viper_pcmcia_device);
- if (ret)
+ if (ret) {
platform_device_put(viper_pcmcia_device);
+ arcom_pcmcia_dev = NULL;
+ }
return ret;
}
-static void __exit viper_pcmcia_exit(void)
+static int viper_pcmcia_remove(struct platform_device *pdev)
{
platform_device_unregister(viper_pcmcia_device);
+ arcom_pcmcia_dev = NULL;
+ return 0;
+}
+
+static struct platform_device_id viper_pcmcia_id_table[] = {
+ { .name = "viper-pcmcia", },
+ { .name = "zeus-pcmcia", },
+ { },
+};
+
+static struct platform_driver viper_pcmcia_driver = {
+ .probe = viper_pcmcia_probe,
+ .remove = viper_pcmcia_remove,
+ .driver = {
+ .name = "arcom-pcmcia",
+ .owner = THIS_MODULE,
+ },
+ .id_table = viper_pcmcia_id_table,
+};
+
+static int __init viper_pcmcia_init(void)
+{
+ return platform_driver_register(&viper_pcmcia_driver);
+}
+
+static void __exit viper_pcmcia_exit(void)
+{
+ return platform_driver_unregister(&viper_pcmcia_driver);
}
module_init(viper_pcmcia_init);
module_exit(viper_pcmcia_exit);
+MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
MODULE_LICENSE("GPL");