diff options
| -rw-r--r-- | Documentation/edac.txt | 151 | ||||
| -rw-r--r-- | drivers/edac/edac_mc_sysfs.c | 117 |
2 files changed, 73 insertions, 195 deletions
diff --git a/Documentation/edac.txt b/Documentation/edac.txt index a5c36842ecef..ced527388001 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked set of DIMMs for channels 0 and 1. -Within each of the 'mc','mcX' and 'csrowX' directories are several +Within each of the 'mcX' and 'csrowX' directories are several EDAC control and attribute files. - -============================================================================ -DIRECTORY 'mc' - -In directory 'mc' are EDAC system overall control and attribute files: - - -Panic on UE control file: - - 'edac_mc_panic_on_ue' - - An uncorrectable error will cause a machine panic. This is usually - desirable. It is a bad idea to continue when an uncorrectable error - occurs - it is indeterminate what was uncorrected and the operating - system context might be so mangled that continuing will lead to further - corruption. If the kernel has MCE configured, then EDAC will never - notice the UE. - - LOAD TIME: module/kernel parameter: panic_on_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue - - -Log UE control file: - - 'edac_mc_log_ue' - - Generate kernel messages describing uncorrectable errors. These errors - are reported through the system message log system. UE statistics - will be accumulated even when UE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue - - -Log CE control file: - - 'edac_mc_log_ce' - - Generate kernel messages describing correctable errors. These - errors are reported through the system message log system. - CE statistics will be accumulated even when CE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ce=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce - - -Polling period control file: - - 'edac_mc_poll_msec' - - The time period, in milliseconds, for polling for error information. - Too small a value wastes resources. Too large a value might delay - necessary handling of errors and might loose valuable information for - locating the error. 1000 milliseconds (once each second) is the current - default. Systems which require all the bandwidth they can get, may - increase this. - - LOAD TIME: module/kernel parameter: poll_msec=[0|1] - - RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec - - ============================================================================ 'mcX' DIRECTORIES @@ -537,7 +472,6 @@ Channel 1 DIMM Label control file: motherboard specific and determination of this information must occur in userland at this time. - ============================================================================ SYSTEM LOGGING @@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional, driver-specific error message. - ============================================================================ PCI Bus Parity Detection @@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file: echo "0" >/sys/devices/system/edac/pci/check_pci_parity +Parity Count: + + 'pci_parity_count' + + This attribute file will display the number of parity errors that + have been detected. + + +============================================================================ +MODULE PARAMETERS + +Panic on UE control file: + + 'edac_mc_panic_on_ue' + + An uncorrectable error will cause a machine panic. This is usually + desirable. It is a bad idea to continue when an uncorrectable error + occurs - it is indeterminate what was uncorrected and the operating + system context might be so mangled that continuing will lead to further + corruption. If the kernel has MCE configured, then EDAC will never + notice the UE. + + LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue + + +Log UE control file: + + 'edac_mc_log_ue' + + Generate kernel messages describing uncorrectable errors. These errors + are reported through the system message log system. UE statistics + will be accumulated even when UE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue + + +Log CE control file: + + 'edac_mc_log_ce' + + Generate kernel messages describing correctable errors. These + errors are reported through the system message log system. + CE statistics will be accumulated even when CE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce + + +Polling period control file: + + 'edac_mc_poll_msec' + + The time period, in milliseconds, for polling for error information. + Too small a value wastes resources. Too large a value might delay + necessary handling of errors and might loose valuable information for + locating the error. 1000 milliseconds (once each second) is the current + default. Systems which require all the bandwidth they can get, may + increase this. + + LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1] + + RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec + Panic on PCI PARITY Error: @@ -614,21 +615,13 @@ Panic on PCI PARITY Error: error has been detected. - module/kernel parameter: panic_on_pci_parity=[0|1] + module/kernel parameter: edac_panic_on_pci_pe=[0|1] Enable: - echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity + echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe Disable: - echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity - - -Parity Count: - - 'pci_parity_count' - - This attribute file will display the number of parity errors that - have been detected. + echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 7bb9c1532b90..cbe1a17e42f7 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -123,16 +123,6 @@ static const char *edac_caps[] = { -/* - * /sys/devices/system/edac/mc; - * data structures and methods - */ -static ssize_t memctrl_int_show(void *ptr, char *buffer) -{ - int *value = (int *)ptr; - return sprintf(buffer, "%u\n", *value); -} - static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) { int *value = (int *)ptr; @@ -143,23 +133,6 @@ static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count) return count; } -/* - * mc poll_msec time value - */ -static ssize_t poll_msec_int_store(void *ptr, const char *buffer, size_t count) -{ - int *value = (int *)ptr; - - if (isdigit(*buffer)) { - *value = simple_strtoul(buffer, NULL, 0); - - /* notify edac_mc engine to reset the poll period */ - edac_mc_reset_delay_period(*value); - } - - return count; -} - /* EDAC sysfs CSROW data structures and methods */ @@ -669,98 +642,10 @@ static struct kobj_type ktype_mci = { .default_attrs = (struct attribute **)mci_attr, }; -/* show/store, tables, etc for the MC kset */ - - -struct memctrl_dev_attribute { - struct attribute attr; - void *value; - ssize_t(*show) (void *, char *); - ssize_t(*store) (void *, const char *, size_t); -}; - -/* Set of show/store abstract level functions for memory control object */ -static ssize_t memctrl_dev_show(struct kobject *kobj, - struct attribute *attr, char *buffer) -{ - struct memctrl_dev_attribute *memctrl_dev; - memctrl_dev = (struct memctrl_dev_attribute *)attr; - - if (memctrl_dev->show) - return memctrl_dev->show(memctrl_dev->value, buffer); - - return -EIO; -} - -static ssize_t memctrl_dev_store(struct kobject *kobj, struct attribute *attr, - const char *buffer, size_t count) -{ - struct memctrl_dev_attribute *memctrl_dev; - memctrl_dev = (struct memctrl_dev_attribute *)attr; - - if (memctrl_dev->store) - return memctrl_dev->store(memctrl_dev->value, buffer, count); - - return -EIO; -} - -static struct sysfs_ops memctrlfs_ops = { - .show = memctrl_dev_show, - .store = memctrl_dev_store -}; - -#define MEMCTRL_ATTR(_name, _mode, _show, _store) \ -static struct memctrl_dev_attribute attr_##_name = { \ - .attr = {.name = __stringify(_name), .mode = _mode }, \ - .value = &_name, \ - .show = _show, \ - .store = _store, \ -}; - -#define MEMCTRL_STRING_ATTR(_name, _data, _mode, _show, _store) \ -static struct memctrl_dev_attribute attr_##_name = { \ - .attr = {.name = __stringify(_name), .mode = _mode }, \ - .value = _data, \ - .show = _show, \ - .store = _store, \ -}; - -/* csrow<id> control files */ -MEMCTRL_ATTR(edac_mc_panic_on_ue, - S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store); - -MEMCTRL_ATTR(edac_mc_log_ue, - S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store); - -MEMCTRL_ATTR(edac_mc_log_ce, - S_IRUGO | S_IWUSR, memctrl_int_show, memctrl_int_store); - -MEMCTRL_ATTR(edac_mc_poll_msec, - S_IRUGO | S_IWUSR, memctrl_int_show, poll_msec_int_store); - -/* Base Attributes of the memory ECC object */ -static struct memctrl_dev_attribute *memctrl_attr[] = { - &attr_edac_mc_panic_on_ue, - &attr_edac_mc_log_ue, - &attr_edac_mc_log_ce, - &attr_edac_mc_poll_msec, - NULL, -}; - - -/* the ktype for the mc_kset internal kobj */ -static struct kobj_type ktype_mc_set_attribs = { - .sysfs_ops = &memctrlfs_ops, - .default_attrs = (struct attribute **)memctrl_attr, -}; - /* EDAC memory controller sysfs kset: * /sys/devices/system/edac/mc */ -static struct kset mc_kset = { - .kobj = {.ktype = &ktype_mc_set_attribs }, -}; - +static struct kset mc_kset; /* * edac_mc_register_sysfs_main_kobj |