diff options
177 files changed, 8618 insertions, 3992 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 967ecf92d6a7..f4e25c648fbb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select GENERIC_TBSYNC default y config PPC_PREP @@ -314,15 +315,17 @@ config PPC_MAPLE bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. For more informations, refer to <http://www.970eval.com> -config PPC_BPA - bool " Broadband Processor Architecture" +config PPC_CELL + bool " Cell Broadband Processor Architecture" depends on PPC_MULTIPLATFORM && PPC64 select PPC_RTAS + select MMIO_NVRAM config PPC_OF bool @@ -353,13 +356,26 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config MMIO_NVRAM + bool + default n + config MPIC_BROKEN_U3 bool depends on PPC_MAPLE default y -config BPA_IIC - depends on PPC_BPA +config CELL_IIC + depends on PPC_CELL bool default y @@ -372,6 +388,11 @@ config PPC_MPC106 bool default n +config GENERIC_TBSYNC + bool + default y if CONFIG_PPC32 && CONFIG_SMP + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2f4cce06a7e5..5bc11bd36c1f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -12,9 +12,6 @@ # Rewritten by Cort Dougan and Paul Mackerras # -# This must match PAGE_OFFSET in include/asm-powerpc/page.h. -KERNELLOAD := $(CONFIG_KERNEL_START) - HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(CONFIG_PPC64),y) @@ -59,7 +56,7 @@ override LD += -m elf$(SZ)ppc override CC += -m$(SZ) endif -LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD) +LDFLAGS_vmlinux := -Bstatic # The -Iarch/$(ARCH)/include is temporary while we are merging CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig new file mode 100644 index 000000000000..67ffecbc05cb --- /dev/null +++ b/arch/powerpc/configs/cell_defconfig @@ -0,0 +1,1024 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:29:10 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_BPA=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_BPA_IIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +# CONFIG_IOMMU_VMERGE is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WATCHDOG_RTAS=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig new file mode 100644 index 000000000000..6323065fbf2c --- /dev/null +++ b/arch/powerpc/configs/g5_defconfig @@ -0,0 +1,1392 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:23 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +CONFIG_PPC_PMAC=y +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_PPC_PMAC64=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_HOTPLUG_CPU is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_IEEE1394_OUI_DB=y +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_RIVA=y +# CONFIG_FB_RIVA_I2C is not set +# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig new file mode 100644 index 000000000000..62e92c7e9e27 --- /dev/null +++ b/arch/powerpc/configs/iseries_defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:56 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +CONFIG_PPC_ISERIES=y +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_IBMVIO=y +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=m +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_ISERIES_VETH=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# iSeries device drivers +# +CONFIG_VIOCONS=y +CONFIG_VIODASD=y +CONFIG_VIOCD=m +CONFIG_VIOTAPE=m +CONFIG_VIOPATH=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig new file mode 100644 index 000000000000..7b480f3d1406 --- /dev/null +++ b/arch/powerpc/configs/maple_defconfig @@ -0,0 +1,1062 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:31:24 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +CONFIG_PPC_MAPLE=y +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +# CONFIG_ALTIVEC is not set +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_MPIC_BROKEN_U3=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_IDE_TASK_IOCTL=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +CONFIG_AMD8111_ETH=y +# CONFIG_AMD8111E_NAPI is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_TI=m +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig new file mode 100644 index 000000000000..9f09dff9e11a --- /dev/null +++ b/arch/powerpc/configs/pseries_defconfig @@ -0,0 +1,1371 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:32:17 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_PPC_PSERIES=y +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y +CONFIG_IBMVIO=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA=y +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_EEH=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_2BUFF_MODE is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +# CONFIG_FB_MATROX_I2C is not set +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 572d4f5eaacb..b3ae2993efb8 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -13,12 +13,15 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o obj-$(CONFIG_PPC_RTAS) += rtas.o +obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o +obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -38,6 +41,7 @@ obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o +obj-$(CONFIG_SMP) += smp.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -46,8 +50,9 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 +smpobj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o + setup-common.o $(smpobj-y) endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 330cd783206f..bc5a3689cc05 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -40,7 +40,7 @@ #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> #include <asm/systemcfg.h> #include <asm/compat.h> diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 147215a0d6c0..45d81976987f 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -35,7 +35,7 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -1914,24 +1914,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c index b81de286df5e..eded971d1bf9 100644 --- a/arch/powerpc/kernel/lparmap.c +++ b/arch/powerpc/kernel/lparmap.c @@ -8,7 +8,7 @@ */ #include <asm/mmu.h> #include <asm/page.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xNumberEsids = HvEsidsToMap, diff --git a/include/asm-ppc64/ppc32.h b/arch/powerpc/kernel/ppc32.h index 3945a55d112a..90e562771791 100644 --- a/include/asm-ppc64/ppc32.h +++ b/arch/powerpc/kernel/ppc32.h @@ -91,6 +91,22 @@ typedef struct sigaltstack_32 { compat_size_t ss_size; } stack_32_t; +struct pt_regs32 { + unsigned int gpr[32]; + unsigned int nip; + unsigned int msr; + unsigned int orig_gpr3; /* Used for restarting system calls */ + unsigned int ctr; + unsigned int link; + unsigned int xer; + unsigned int ccr; + unsigned int mq; /* 601 only (not used at present) */ + unsigned int trap; /* Reason for being here */ + unsigned int dar; /* Fault registers */ + unsigned int dsisr; + unsigned int result; /* Result of a system call */ +}; + struct sigcontext32 { unsigned int _unused[4]; int signal; diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8bc540337ba0..47d6f7e2ea9f 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -81,15 +81,6 @@ EXPORT_SYMBOL(_prep_type); EXPORT_SYMBOL(ucSystemType); #endif -#if !defined(__INLINE_BITOPS) -EXPORT_SYMBOL(set_bit); -EXPORT_SYMBOL(clear_bit); -EXPORT_SYMBOL(change_bit); -EXPORT_SYMBOL(test_and_set_bit); -EXPORT_SYMBOL(test_and_clear_bit); -EXPORT_SYMBOL(test_and_change_bit); -#endif /* __INLINE_BITOPS */ - EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8f85dabe4df3..96843211cc5c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -48,8 +48,8 @@ #include <asm/prom.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> -#include <asm/plpar_wrappers.h> #include <asm/time.h> +#include <asm/machdep.h> #endif extern unsigned long _get_SP(void); @@ -201,27 +201,15 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) } #endif /* CONFIG_SPE */ -static void set_dabr_spr(unsigned long val) -{ - mtspr(SPRN_DABR, val); -} - int set_dabr(unsigned long dabr) { - int ret = 0; - #ifdef CONFIG_PPC64 - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER; - ret = plpar_set_xdabr(dabr, flags); - } else if (firmware_has_feature(FW_FEATURE_DABR)) { - ret = plpar_set_dabr(dabr); - } else + if (ppc_md.set_dabr) + return ppc_md.set_dabr(dabr); #endif - set_dabr_spr(dabr); - return ret; + mtspr(SPRN_DABR, dabr); + return 0; } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2eccd0e159e3..eec2da695508 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1285,7 +1285,7 @@ static int __init early_init_dt_scan_memory(unsigned long node, endp = reg + (l / sizeof(cell_t)); - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", + DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", uname, l, reg[0], reg[1], reg[2], reg[3]); while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9750b3cd8ecd..c758b6624d7b 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2000,7 +2000,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, #endif /* - * On pSeries and BPA, copy the CPU hold code + * Copy the CPU hold code */ if (RELOC(of_platform) != PLATFORM_POWERMAC) copy_and_flush(0, KERNELBASE + offset, 0x100, 0); diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b079d96..5bdd5b079d96 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4d22eeeeb91d..b7fc2d884950 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -43,6 +43,13 @@ char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; unsigned long rtas_rmo_buf; /* + * If non-NULL, this gets called when the kernel terminates. + * This is done like this so rtas_flash can be a module. + */ +void (*rtas_flash_term_hook)(int); +EXPORT_SYMBOL(rtas_flash_term_hook); + +/* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which * is why the token is hard-coded to 10. @@ -206,6 +213,7 @@ void rtas_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } +EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */ int rtas_token(const char *service) { @@ -492,6 +500,8 @@ int rtas_set_indicator(int indicator, int index, int new_value) void rtas_restart(char *cmd) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_RESTART); printk("RTAS system-reboot returned %d\n", rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); for (;;); @@ -499,6 +509,8 @@ void rtas_restart(char *cmd) void rtas_power_off(void) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); /* allow power on only with power button press */ printk("RTAS power-off returned %d\n", rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); @@ -507,7 +519,12 @@ void rtas_power_off(void) void rtas_halt(void) { - rtas_power_off(); + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_HALT); + /* allow power on only with power button press */ + printk("RTAS power-off returned %d\n", + rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); + for (;;); } /* Must be in the RMO region, so we place it here */ diff --git a/arch/ppc64/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 923e2e201a70..50500093c97f 100644 --- a/arch/ppc64/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -19,6 +19,7 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/rtas.h> +#include <asm/abs_addr.h> #define MODULE_VERS "1.0" #define MODULE_NAME "rtas_flash" @@ -71,10 +72,36 @@ #define VALIDATE_BUF_SIZE 4096 #define RTAS_MSG_MAXLEN 64 +struct flash_block { + char *data; + unsigned long length; +}; + +/* This struct is very similar but not identical to + * that needed by the rtas flash update. + * All we need to do for rtas is rewrite num_blocks + * into a version/length and translate the pointers + * to absolute. + */ +#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) +struct flash_block_list { + unsigned long num_blocks; + struct flash_block_list *next; + struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; +}; +struct flash_block_list_header { /* just the header of flash_block_list */ + unsigned long num_blocks; + struct flash_block_list *next; +}; + +static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + /* Local copy of the flash block list. * We only allow one open of the flash proc file and create this - * list as we go. This list will be put in the kernel's - * rtas_firmware_flash_list global var once it is fully read. + * list as we go. This list will be put in the + * rtas_firmware_flash_list var once it is fully read. * * For convenience as we build the list we use virtual addrs, * we do not fill in the version number, and the length field @@ -562,6 +589,86 @@ static int validate_flash_release(struct inode *inode, struct file *file) return 0; } +static void rtas_flash_firmware(int reboot_type) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + if (rtas_firmware_flash_list.next == NULL) + return; /* nothing to do */ + + if (reboot_type != SYS_RESTART) { + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); + return; + } + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " + "is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + static void remove_flash_pde(struct proc_dir_entry *dp) { if (dp) { @@ -701,6 +808,7 @@ int __init rtas_flash_init(void) if (rc != 0) goto cleanup; + rtas_flash_term_hook = rtas_flash_firmware; return 0; cleanup: @@ -714,6 +822,7 @@ cleanup: void __exit rtas_flash_cleanup(void) { + rtas_flash_term_hook = NULL; remove_flash_pde(firmware_flash_pde); remove_flash_pde(firmware_update_pde); remove_flash_pde(validate_pde); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1292460fcde2..d43fa8c0e5ac 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -170,12 +170,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #ifdef CONFIG_SMP -#ifdef CONFIG_PPC64 /* XXX for now */ pvr = per_cpu(pvr, cpu_id); #else - pvr = cpu_data[cpu_id].pvr; -#endif -#else pvr = mfspr(SPRN_PVR); #endif maj = (pvr >> 8) & 0xFF; @@ -201,11 +197,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) #ifdef CONFIG_TAU_AVERAGE /* more straightforward, but potentially misleading */ seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); + cpu_temp(cpu_id)); #else /* show the actual temp sensor range */ u32 temp; - temp = cpu_temp_both(i); + temp = cpu_temp_both(cpu_id); seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", temp & 0xff, temp >> 16); #endif @@ -408,3 +404,118 @@ static int __init set_preferred_console(void) } console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ + +#ifdef CONFIG_SMP + +/** + * setup_cpu_maps - initialize the following cpu maps: + * cpu_possible_map + * cpu_present_map + * cpu_sibling_map + * + * Having the possible map set up early allows us to restrict allocations + * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. + * + * We do not initialize the online map here; cpus set their own bits in + * cpu_online_map as they come up. + * + * This function is valid only for Open Firmware systems. finish_device_tree + * must be called before using this. + * + * While we're here, we may as well set the "physical" cpu ids in the paca. + */ +void __init smp_setup_cpu_maps(void) +{ + struct device_node *dn = NULL; + int cpu = 0; + int swap_cpuid = 0; + + while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { + int *intserv; + int j, len = sizeof(u32), nthreads = 1; + + intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s", + &len); + if (intserv) + nthreads = len / sizeof(int); + else { + intserv = (int *) get_property(dn, "reg", NULL); + if (!intserv) + intserv = &cpu; /* assume logical == phys */ + } + + for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, intserv[j]); + + if (intserv[j] == boot_cpuid_phys) + swap_cpuid = cpu; + cpu_set(cpu, cpu_possible_map); + cpu++; + } + } + + /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that + * boot cpu is logical 0. + */ + if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { + u32 tmp; + tmp = get_hard_smp_processor_id(0); + set_hard_smp_processor_id(0, boot_cpuid_phys); + set_hard_smp_processor_id(swap_cpuid, tmp); + } + +#ifdef CONFIG_PPC64 + /* + * On pSeries LPAR, we need to know how many cpus + * could possibly be added to this partition. + */ + if (systemcfg->platform == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { + int num_addr_cell, num_size_cell, maxcpus; + unsigned int *ireg; + + num_addr_cell = prom_n_addr_cells(dn); + num_size_cell = prom_n_size_cells(dn); + + ireg = (unsigned int *) + get_property(dn, "ibm,lrdr-capacity", NULL); + + if (!ireg) + goto out; + + maxcpus = ireg[num_addr_cell + num_size_cell]; + + /* Double maxcpus for processors which have SMT capability */ + if (cpu_has_feature(CPU_FTR_SMT)) + maxcpus *= 2; + + if (maxcpus > NR_CPUS) { + printk(KERN_WARNING + "Partition configured for %d cpus, " + "operating system maximum is %d.\n", + maxcpus, NR_CPUS); + maxcpus = NR_CPUS; + } else + printk(KERN_INFO "Partition configured for %d cpus.\n", + maxcpus); + + for (cpu = 0; cpu < maxcpus; cpu++) + cpu_set(cpu, cpu_possible_map); + out: + of_node_put(dn); + } + + /* + * Do the sibling map; assume only two threads per processor. + */ + for_each_cpu(cpu) { + cpu_set(cpu, cpu_sibling_map[cpu]); + if (cpu_has_feature(CPU_FTR_SMT)) + cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); + } + + systemcfg->processorCount = num_present_cpus(); +#endif /* CONFIG_PPC64 */ +} +#endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9680ae99b084..b45eedbb4b3a 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -288,6 +288,8 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); finish_device_tree(); + smp_setup_cpu_maps(); + #ifdef CONFIG_BOOTX_TEXT init_boot_display(); #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 40c48100bf1b..6b52cce872be 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -56,7 +56,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> #include <asm/systemcfg.h> #include <asm/xmon.h> @@ -103,8 +103,6 @@ extern void htab_initialize(void); extern void early_init_devtree(void *flat_dt); extern void unflatten_device_tree(void); -extern void smp_release_cpus(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -183,120 +181,14 @@ static int __init early_smt_enabled(char *p) } early_param("smt-enabled", early_smt_enabled); -/** - * setup_cpu_maps - initialize the following cpu maps: - * cpu_possible_map - * cpu_present_map - * cpu_sibling_map - * - * Having the possible map set up early allows us to restrict allocations - * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. - * - * We do not initialize the online map here; cpus set their own bits in - * cpu_online_map as they come up. - * - * This function is valid only for Open Firmware systems. finish_device_tree - * must be called before using this. - * - * While we're here, we may as well set the "physical" cpu ids in the paca. - */ -static void __init setup_cpu_maps(void) -{ - struct device_node *dn = NULL; - int cpu = 0; - int swap_cpuid = 0; - - check_smt_enabled(); - - while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { - u32 *intserv; - int j, len = sizeof(u32), nthreads; - - intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s", - &len); - if (!intserv) - intserv = (u32 *)get_property(dn, "reg", NULL); - - nthreads = len / sizeof(u32); - - for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; - cpu_set(cpu, cpu_possible_map); - cpu++; - } - } - - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - - /* - * On pSeries LPAR, we need to know how many cpus - * could possibly be added to this partition. - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { - int num_addr_cell, num_size_cell, maxcpus; - unsigned int *ireg; - - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); - - ireg = (unsigned int *) - get_property(dn, "ibm,lrdr-capacity", NULL); - - if (!ireg) - goto out; - - maxcpus = ireg[num_addr_cell + num_size_cell]; - - /* Double maxcpus for processors which have SMT capability */ - if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; - - if (maxcpus > NR_CPUS) { - printk(KERN_WARNING - "Partition configured for %d cpus, " - "operating system maximum is %d.\n", - maxcpus, NR_CPUS); - maxcpus = NR_CPUS; - } else - printk(KERN_INFO "Partition configured for %d cpus.\n", - maxcpus); - - for (cpu = 0; cpu < maxcpus; cpu++) - cpu_set(cpu, cpu_possible_map); - out: - of_node_put(dn); - } - - /* - * Do the sibling map; assume only two threads per processor. - */ - for_each_cpu(cpu) { - cpu_set(cpu, cpu_sibling_map[cpu]); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); - } - - systemcfg->processorCount = num_present_cpus(); -} +#else +#define check_smt_enabled() #endif /* CONFIG_SMP */ extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; -extern struct machdep_calls bpa_md; +extern struct machdep_calls cell_md; extern struct machdep_calls iseries_md; /* Ultimately, stuff them in an elf section like initcalls... */ @@ -310,8 +202,8 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_BPA - &bpa_md, +#ifdef CONFIG_PPC_CELL + &cell_md, #endif #ifdef CONFIG_PPC_ISERIES &iseries_md, @@ -400,6 +292,29 @@ void __init early_setup(unsigned long dt_ptr) } +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +void smp_release_cpus(void) +{ + extern unsigned long __secondary_hold_spinloop; + + DBG(" -> smp_release_cpus()\n"); + + /* All secondary cpus are spinning on a common spinloop, release them + * all now so they can start to spin on their individual paca + * spinloops. For non SMP kernels, the secondary cpus never get out + * of the common spinloop. + * This is useless but harmless on iSeries, secondaries are already + * waiting on their paca spinloops. */ + + __secondary_hold_spinloop = 1; + mb(); + + DBG(" <- smp_release_cpus()\n"); +} +#else +#define smp_release_cpus() +#endif /* CONFIG_SMP || CONFIG_KEXEC */ + /* * Initialize some remaining members of the ppc64_caches and systemcfg structures * (at least until we get rid of them completely). This is mostly some @@ -589,17 +504,13 @@ void __init setup_system(void) parse_early_param(); -#ifdef CONFIG_SMP - /* - * iSeries has already initialized the cpu maps at this point. - */ - setup_cpu_maps(); + check_smt_enabled(); + smp_setup_cpu_maps(); /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ smp_release_cpus(); -#endif printk("Starting Linux PPC64 %s\n", system_utsname.version); @@ -631,23 +542,6 @@ static int ppc64_panic_event(struct notifier_block *this, return NOTIFY_DONE; } -#ifdef CONFIG_PPC_ISERIES -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (!p) - return 0; - - memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - - return 0; -} -early_param("mem", early_parsemem); -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS static void __init irqstack_early_init(void) { diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 444c3e81884c..876c57c11365 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -43,7 +43,7 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> #ifdef CONFIG_PPC64 -#include <asm/ppc32.h> +#include "ppc32.h" #include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/vdso.h> diff --git a/arch/ppc64/kernel/signal.c b/arch/powerpc/kernel/signal_64.c index ec9d0984b6a0..ec9d0984b6a0 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/powerpc/kernel/signal_64.c diff --git a/arch/ppc64/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index 7d8ec9996b3e..9adef3bddad4 100644 --- a/arch/ppc64/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -22,11 +22,11 @@ enum { }; static struct { - volatile long tb; - volatile long mark; + volatile u64 tb; + volatile u64 mark; volatile int cmd; volatile int handshake; - int filler[3]; + int filler[2]; volatile int ack; int filler2[7]; @@ -36,89 +36,80 @@ static struct { static volatile int running; -static void __devinit -enter_contest( long mark, long add ) +static void __devinit enter_contest(u64 mark, long add) { - while( (long)(mftb() - mark) < 0 ) + while (get_tb() < mark) tbsync->race_result = add; } -void __devinit -smp_generic_take_timebase( void ) +void __devinit smp_generic_take_timebase(void) { int cmd; - long tb; + u64 tb; local_irq_disable(); - while( !running ) - ; + while (!running) + barrier(); rmb(); - for( ;; ) { + for (;;) { tbsync->ack = 1; - while( !tbsync->handshake ) - ; + while (!tbsync->handshake) + barrier(); rmb(); cmd = tbsync->cmd; tb = tbsync->tb; + mb(); tbsync->ack = 0; - if( cmd == kExit ) - return; - - if( cmd == kSetAndTest ) { - while( tbsync->handshake ) - ; - asm volatile ("mttbl %0" :: "r" (tb & 0xfffffffful) ); - asm volatile ("mttbu %0" :: "r" (tb >> 32) ); - } else { - while( tbsync->handshake ) - ; - } - enter_contest( tbsync->mark, -1 ); + if (cmd == kExit) + break; + + while (tbsync->handshake) + barrier(); + if (cmd == kSetAndTest) + set_tb(tb >> 32, tb & 0xfffffffful); + enter_contest(tbsync->mark, -1); } local_irq_enable(); } -static int __devinit -start_contest( int cmd, long offset, long num ) +static int __devinit start_contest(int cmd, long offset, int num) { int i, score=0; - long tb, mark; + u64 tb; + long mark; tbsync->cmd = cmd; local_irq_disable(); - for( i=-3; i<num; ) { - tb = (long)mftb() + 400; + for (i = -3; i < num; ) { + tb = get_tb() + 400; tbsync->tb = tb + offset; tbsync->mark = mark = tb + 400; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); - while( (long)(mftb() - tb) <= 0 ) - ; + while (get_tb() <= tb) + barrier(); tbsync->handshake = 0; - enter_contest( mark, 1 ); + enter_contest(mark, 1); - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); - if ((tbsync->tb ^ (long)mftb()) & 0x8000000000000000ul) - continue; - if( i++ > 0 ) + if (i++ > 0) score += tbsync->race_result; } local_irq_enable(); return score; } -void __devinit -smp_generic_give_timebase( void ) +void __devinit smp_generic_give_timebase(void) { int i, score, score2, old, min=0, max=5000, offset=1000; @@ -130,14 +121,14 @@ smp_generic_give_timebase( void ) mb(); running = 1; - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); printk("Got ack\n"); /* binary search */ - for( old=-1 ; old != offset ; offset=(min+max)/2 ) { - score = start_contest( kSetAndTest, offset, NUM_ITER ); + for (old = -1; old != offset ; offset = (min+max) / 2) { + score = start_contest(kSetAndTest, offset, NUM_ITER); printk("score %d, offset %d\n", score, offset ); @@ -147,21 +138,22 @@ smp_generic_give_timebase( void ) min = offset; old = offset; } - score = start_contest( kSetAndTest, min, NUM_ITER ); - score2 = start_contest( kSetAndTest, max, NUM_ITER ); + score = start_contest(kSetAndTest, min, NUM_ITER); + score2 = start_contest(kSetAndTest, max, NUM_ITER); - printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 ); - score = abs( score ); - score2 = abs( score2 ); + printk("Min %d (score %d), Max %d (score %d)\n", + min, score, max, score2); + score = abs(score); + score2 = abs(score2); offset = (score < score2) ? min : max; /* guard against inaccurate mttb */ - for( i=0; i<10; i++ ) { - start_contest( kSetAndTest, offset, NUM_ITER/10 ); + for (i = 0; i < 10; i++) { + start_contest(kSetAndTest, offset, NUM_ITER/10); - if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 ) + if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0) score2 = -score2; - if( score2 <= score || score2 < 20 ) + if (score2 <= score || score2 < 20) break; } printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER ); @@ -170,10 +162,10 @@ smp_generic_give_timebase( void ) tbsync->cmd = kExit; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); tbsync->handshake = 0; - kfree( tbsync ); + kfree(tbsync); tbsync = NULL; running = 0; } diff --git a/arch/ppc64/kernel/smp.c b/arch/powerpc/kernel/smp.c index 017c12919832..1794a694a928 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -39,13 +39,18 @@ #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/paca.h> #include <asm/time.h> +#include <asm/xmon.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> -#include <asm/abs_addr.h> #include <asm/mpic.h> +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif + +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -60,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); +/* SMP operations for this machine */ struct smp_ops_t *smp_ops; static volatile unsigned int cpu_callin_map[NR_CPUS]; @@ -89,7 +95,9 @@ void __devinit smp_mpic_setup_cpu(int cpu) { mpic_setup_this_cpu(); } +#endif /* CONFIG_MPIC */ +#ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -102,8 +110,7 @@ void __devinit smp_generic_kick_cpu(int nr) paca[nr].cpu_start = 1; smp_mb(); } - -#endif /* CONFIG_MPIC */ +#endif void smp_message_recv(int msg, struct pt_regs *regs) { @@ -111,15 +118,10 @@ void smp_message_recv(int msg, struct pt_regs *regs) case PPC_MSG_CALL_FUNCTION: smp_call_function_interrupt(); break; - case PPC_MSG_RESCHEDULE: + case PPC_MSG_RESCHEDULE: /* XXX Do we have to do this? */ set_need_resched(); break; -#if 0 - case PPC_MSG_MIGRATE_TASK: - /* spare */ - break; -#endif #ifdef CONFIG_DEBUGGER case PPC_MSG_DEBUGGER_BREAK: debugger_ipi(regs); @@ -171,8 +173,8 @@ static struct call_data_struct { int wait; } *call_data; -/* delay of at least 8 seconds on 1GHz cpu */ -#define SMP_CALL_TIMEOUT (1UL << (30 + 3)) +/* delay of at least 8 seconds */ +#define SMP_CALL_TIMEOUT 8 /* * This function sends a 'generic call function' IPI to all other CPUs @@ -194,7 +196,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, { struct call_data_struct data; int ret = -1, cpus; - unsigned long timeout; + u64 timeout; /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -220,11 +222,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Send a message to all other CPUs and wait for them to respond */ smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION); + timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec; + /* Wait for response */ - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.started) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other cpus not " "responding (%d)\n", smp_processor_id(), atomic_read(&data.started)); @@ -234,10 +237,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, } if (wait) { - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.finished) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other " "cpus not finishing (%d/%d)\n", smp_processor_id(), @@ -251,7 +253,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, ret = 0; -out: + out: call_data = NULL; HMT_medium(); spin_unlock(&call_lock); @@ -313,8 +315,11 @@ static void __init smp_create_idle(unsigned int cpu) p = fork_idle(cpu); if (IS_ERR(p)) panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); +#ifdef CONFIG_PPC64 paca[cpu].__current = p; +#endif current_set[cpu] = p->thread_info; + p->thread_info->cpu = cpu; } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -333,18 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; -#ifndef CONFIG_PPC_ISERIES - paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb(); - - /* - * Should update do_gtod.stamp_xsec. - * For now we leave it which means the time can be some - * number of msecs off until someone does a settimeofday() - */ - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - systemcfg->tb_orig_stamp = tb_last_stamp; -#endif - max_cpus = smp_ops->probe(); smp_space_timers(max_cpus); @@ -359,8 +352,9 @@ void __devinit smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != boot_cpuid); cpu_set(boot_cpuid, cpu_online_map); - +#ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; +#endif current_set[boot_cpuid] = current->thread_info; } @@ -444,13 +438,16 @@ int __devinit __cpu_up(unsigned int cpu) { int c; + secondary_ti = current_set[cpu]; if (!cpu_enable(cpu)) return 0; if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; +#ifdef CONFIG_PPC64 paca[cpu].default_decr = tb_ticks_per_jiffy; +#endif /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug @@ -513,7 +510,7 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); - set_dec(paca[cpu].default_decr); + set_dec(tb_ticks_per_jiffy); cpu_callin_map[cpu] = 1; smp_ops->setup_cpu(cpu); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 23436b6c1881..6996a593dcb3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -66,8 +66,8 @@ #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #endif /* keep track of when we need to update the rtc */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5d638ecddbd0..07e5ee40b870 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -147,8 +147,8 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; - case PLATFORM_BPA: - printk("BPA "); + case PLATFORM_CELL: + printk("CELL "); nl = 1; break; } @@ -749,22 +749,22 @@ static int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d4dfcfbce272..7fa7b15fd8e6 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -3,9 +3,12 @@ #include <asm/page.h> #else #define PAGE_SIZE 4096 +#define KERNELBASE CONFIG_KERNEL_START #endif #include <asm-generic/vmlinux.lds.h> +ENTRY(_stext) + #ifdef CONFIG_PPC64 OUTPUT_ARCH(powerpc:common64) jiffies = jiffies_64; @@ -21,33 +24,9 @@ SECTIONS *(.exit.data) } + . = KERNELBASE; /* Read-only sections, merged into text segment: */ -#ifdef CONFIG_PPC32 - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } -/* .init : { *(.init) } =0*/ - .plt : { *(.plt) } -#endif .text : { *(.text .text.*) SCHED_TEXT diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e6b2be3bcec1..34f5c2e074c9 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -3,13 +3,14 @@ # ifeq ($(CONFIG_PPC_MERGE),y) -obj-y := string.o +obj-y := string.o strcase.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o endif -obj-y += strcase.o -obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o +obj-y += bitops.o obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ - memcpy_64.o usercopy_64.o mem_64.o + memcpy_64.o usercopy_64.o mem_64.o string.o \ + strcase.o obj-$(CONFIG_PPC_ISERIES) += e2a.o obj-$(CONFIG_XMON) += sstep.o diff --git a/arch/ppc64/kernel/bitops.c b/arch/powerpc/lib/bitops.c index ae329e8b4acb..b67ce3004ebf 100644 --- a/arch/ppc64/kernel/bitops.c +++ b/arch/powerpc/lib/bitops.c @@ -1,93 +1,97 @@ -/* - * These are too big to be inlined. - */ - -#include <linux/kernel.h> +#include <linux/types.h> #include <linux/module.h> -#include <linux/bitops.h> #include <asm/byteorder.h> +#include <asm/bitops.h> -unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +unsigned long find_next_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp |= ~0UL >> (64 - offset); - if (size < 64) + tmp &= (~0UL << offset); + if (size < BITS_PER_LONG) goto found_first; - if (~tmp) + if (tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if (~(tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ + tmp &= (~0UL >> (64 - size)); + if (tmp == 0UL) /* Are any bits set? */ return result + size; /* Nope. */ found_middle: - return result + ffz(tmp); + return result + __ffs(tmp); } +EXPORT_SYMBOL(find_next_bit); -EXPORT_SYMBOL(find_next_zero_bit); - -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/* + * This implementation of find_{first,next}_zero_bit was stolen from + * Linus' asm-alpha/bitops.h. + */ +unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp &= (~0UL << offset); - if (size < 64) + tmp |= ~0UL >> (BITS_PER_LONG - offset); + if (size < BITS_PER_LONG) goto found_first; - if (tmp) + if (~tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if ((tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if (~(tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp &= (~0UL >> (64 - size)); - if (tmp == 0UL) /* Are any bits set? */ + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ return result + size; /* Nope. */ found_middle: - return result + __ffs(tmp); + return result + ffz(tmp); } - -EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(find_next_zero_bit); static inline unsigned int ext2_ilog2(unsigned int x) { @@ -106,8 +110,8 @@ static inline unsigned int ext2_ffz(unsigned int x) return rc; } -unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) { const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5); unsigned int result = offset & ~31; @@ -143,5 +147,4 @@ found_first: found_middle: return result + ext2_ffz(tmp); } - EXPORT_SYMBOL(find_next_zero_le_bit); diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 3794715b2972..2a912f411eb4 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -22,7 +22,7 @@ /* waiting for a spinlock... */ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 172c0db63504..8836b3a00668 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ +obj-$(CONFIG_PPC_CELL) += cell/ diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile new file mode 100644 index 000000000000..55e094b96bc0 --- /dev/null +++ b/arch/powerpc/platforms/cell/Makefile @@ -0,0 +1,2 @@ +obj-y += interrupt.o iommu.o setup.o spider-pic.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/powerpc/platforms/cell/interrupt.c index 0aaa878e19d3..7fbe78a9327d 100644 --- a/arch/ppc64/kernel/bpa_iic.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,5 +1,5 @@ /* - * BPA Internal Interrupt Controller + * Cell Internal Interrupt Controller * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * @@ -31,7 +31,7 @@ #include <asm/prom.h> #include <asm/ptrace.h> -#include "bpa_iic.h" +#include "interrupt.h" struct iic_pending_bits { u32 data; @@ -89,7 +89,7 @@ static void iic_end(unsigned int irq) } static struct hw_interrupt_type iic_pic = { - .typename = " BPA-IIC ", + .typename = " CELL-IIC ", .startup = iic_startup, .enable = iic_enable, .disable = iic_disable, @@ -106,7 +106,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending) irq = -1; /* - * This mapping is specific to the Broadband + * This mapping is specific to the Cell Broadband * Engine. We might need to get the numbers * from the device tree to support future CPUs. */ diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/powerpc/platforms/cell/interrupt.h index 6833c3022166..37d58e6fd0c6 100644 --- a/arch/ppc64/kernel/bpa_iic.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -1,5 +1,5 @@ -#ifndef ASM_BPA_IIC_H -#define ASM_BPA_IIC_H +#ifndef ASM_CELL_PIC_H +#define ASM_CELL_PIC_H #ifdef __KERNEL__ /* * Mapping of IIC pending bits into per-node @@ -21,7 +21,7 @@ * + node number * * don't care * - * A node consists of a Broadband Engine and an optional + * A node consists of a Cell Broadband Engine and an optional * south bridge device providing a maximum of 64 IRQs. * The south bridge may be connected to either IOIF0 * or IOIF1. @@ -59,4 +59,4 @@ extern void spider_init_IRQ(void); extern int spider_get_irq(unsigned long int_pending); #endif -#endif /* ASM_BPA_IIC_H */ +#endif /* ASM_CELL_PIC_H */ diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/powerpc/platforms/cell/iommu.c index da1b4b7a3269..74f999b4ac9e 100644 --- a/arch/ppc64/kernel/bpa_iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1,5 +1,5 @@ /* - * IOMMU implementation for Broadband Processor Architecture + * IOMMU implementation for Cell Broadband Processor Architecture * We just establish a linear mapping at boot by setting all the * IOPT cache entries in the CPU. * The mapping functions should be identical to pci_direct_iommu, @@ -41,7 +41,7 @@ #include <asm/system.h> #include <asm/ppc-pci.h> -#include "bpa_iommu.h" +#include "iommu.h" static inline unsigned long get_iopt_entry(unsigned long real_address, unsigned long ioid, @@ -276,7 +276,7 @@ static void iommu_dev_setup_null(struct pci_dev *d) { } * for each DMA window used by any device. For now, we * happen to know that there is only one DMA window in use, * starting at iopt_phys_offset. */ -static void bpa_map_iommu(void) +static void cell_map_iommu(void) { unsigned long address; void __iomem *base; @@ -309,7 +309,7 @@ static void bpa_map_iommu(void) } -static void *bpa_alloc_coherent(struct device *hwdev, size_t size, +static void *cell_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *ret; @@ -317,65 +317,65 @@ static void *bpa_alloc_coherent(struct device *hwdev, size_t size, ret = (void *)__get_free_pages(flag, get_order(size)); if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + *dma_handle = virt_to_abs(ret) | CELL_DMA_VALID; } return ret; } -static void bpa_free_coherent(struct device *hwdev, size_t size, +static void cell_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) { free_pages((unsigned long)vaddr, get_order(size)); } -static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, +static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, size_t size, enum dma_data_direction direction) { - return virt_to_abs(ptr) | BPA_DMA_VALID; + return virt_to_abs(ptr) | CELL_DMA_VALID; } -static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, +static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { } -static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, +static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { int i; for (i = 0; i < nents; i++, sg++) { sg->dma_address = (page_to_phys(sg->page) + sg->offset) - | BPA_DMA_VALID; + | CELL_DMA_VALID; sg->dma_length = sg->length; } return nents; } -static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, +static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { } -static int bpa_dma_supported(struct device *dev, u64 mask) +static int cell_dma_supported(struct device *dev, u64 mask) { return mask < 0x100000000ull; } -void bpa_init_iommu(void) +void cell_init_iommu(void) { - bpa_map_iommu(); + cell_map_iommu(); /* Direct I/O, IOMMU off */ ppc_md.iommu_dev_setup = iommu_dev_setup_null; ppc_md.iommu_bus_setup = iommu_bus_setup_null; - pci_dma_ops.alloc_coherent = bpa_alloc_coherent; - pci_dma_ops.free_coherent = bpa_free_coherent; - pci_dma_ops.map_single = bpa_map_single; - pci_dma_ops.unmap_single = bpa_unmap_single; - pci_dma_ops.map_sg = bpa_map_sg; - pci_dma_ops.unmap_sg = bpa_unmap_sg; - pci_dma_ops.dma_supported = bpa_dma_supported; + pci_dma_ops.alloc_coherent = cell_alloc_coherent; + pci_dma_ops.free_coherent = cell_free_coherent; + pci_dma_ops.map_single = cell_map_single; + pci_dma_ops.unmap_single = cell_unmap_single; + pci_dma_ops.map_sg = cell_map_sg; + pci_dma_ops.unmap_sg = cell_unmap_sg; + pci_dma_ops.dma_supported = cell_dma_supported; } diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/powerpc/platforms/cell/iommu.h index e547d77dfa04..490d77abfe85 100644 --- a/arch/ppc64/kernel/bpa_iommu.h +++ b/arch/powerpc/platforms/cell/iommu.h @@ -1,5 +1,5 @@ -#ifndef BPA_IOMMU_H -#define BPA_IOMMU_H +#ifndef CELL_IOMMU_H +#define CELL_IOMMU_H /* some constants */ enum { @@ -55,11 +55,11 @@ enum { /* The high bit needs to be set on every DMA address, only 2GB are addressable */ - BPA_DMA_VALID = 0x80000000, - BPA_DMA_MASK = 0x7fffffff, + CELL_DMA_VALID = 0x80000000, + CELL_DMA_MASK = 0x7fffffff, }; -void bpa_init_iommu(void); +void cell_init_iommu(void); #endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/powerpc/platforms/cell/setup.c index c2dc8f282eb8..9a495634d0c2 100644 --- a/arch/ppc64/kernel/bpa_setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -1,11 +1,11 @@ /* - * linux/arch/ppc/kernel/bpa_setup.c + * linux/arch/powerpc/platforms/cell/cell_setup.c * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) * Modified by PPC64 Team, IBM Corp - * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * Modified by Cell Team, IBM Deutschland Entwicklung GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -46,8 +46,8 @@ #include <asm/ppc-pci.h> #include <asm/irq.h> -#include "bpa_iic.h" -#include "bpa_iommu.h" +#include "interrupt.h" +#include "iommu.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -55,7 +55,7 @@ #define DBG(fmt...) #endif -void bpa_show_cpuinfo(struct seq_file *m) +void cell_show_cpuinfo(struct seq_file *m) { struct device_node *root; const char *model = ""; @@ -63,22 +63,22 @@ void bpa_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: BPA %s\n", model); + seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); } -static void bpa_progress(char *s, unsigned short hex) +static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); } -static void __init bpa_setup_arch(void) +static void __init cell_setup_arch(void) { ppc_md.init_IRQ = iic_init_IRQ; ppc_md.get_irq = iic_get_irq; #ifdef CONFIG_SMP - smp_init_pSeries(); + smp_init_cell(); #endif /* init to some ~sane value until calibrate_delay() runs */ @@ -97,39 +97,39 @@ static void __init bpa_setup_arch(void) conswitchp = &dummy_con; #endif - bpa_nvram_init(); + mmio_nvram_init(); } /* * Early initialization. Relocation is on but do not reference unbolted pages */ -static void __init bpa_init_early(void) +static void __init cell_init_early(void) { - DBG(" -> bpa_init_early()\n"); + DBG(" -> cell_init_early()\n"); hpte_init_native(); - bpa_init_iommu(); + cell_init_iommu(); - ppc64_interrupt_controller = IC_BPA_IIC; + ppc64_interrupt_controller = IC_CELL_PIC; - DBG(" <- bpa_init_early()\n"); + DBG(" <- cell_init_early()\n"); } -static int __init bpa_probe(int platform) +static int __init cell_probe(int platform) { - if (platform != PLATFORM_BPA) + if (platform != PLATFORM_CELL) return 0; return 1; } -struct machdep_calls __initdata bpa_md = { - .probe = bpa_probe, - .setup_arch = bpa_setup_arch, - .init_early = bpa_init_early, - .show_cpuinfo = bpa_show_cpuinfo, +struct machdep_calls __initdata cell_md = { + .probe = cell_probe, + .setup_arch = cell_setup_arch, + .init_early = cell_init_early, + .show_cpuinfo = cell_show_cpuinfo, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, @@ -137,5 +137,5 @@ struct machdep_calls __initdata bpa_md = { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .progress = bpa_progress, + .progress = cell_progress, }; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c new file mode 100644 index 000000000000..de96eadf419d --- /dev/null +++ b/arch/powerpc/platforms/cell/smp.c @@ -0,0 +1,230 @@ +/* + * SMP support for BPA machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> + +#include "interrupt.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +static cpumask_t of_spin_map; + +extern void pSeries_secondary_smp_init(unsigned long); + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + int status; + unsigned long start_here = __pa((u32)*((unsigned long *) + pSeries_secondary_smp_init)); + unsigned int pcpu; + int start_cpu; + + if (cpu_isset(lcpu, of_spin_map)) + /* Already started by OF and sitting in spin loop */ + return 1; + + pcpu = get_hard_smp_processor_id(lcpu); + + /* Fixup atomic count: it exited inside IRQ handler. */ + paca[lcpu].__current->thread_info->preempt_count = 0; + + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + if (status != 0) { + printk(KERN_ERR "start-cpu failed: %i\n", status); + return 0; + } + + return 1; +} + +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase = 0; + +static void __devinit cell_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +static void __devinit cell_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __devinit smp_cell_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; +} + +static int smp_cell_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. Odd-numbered + * cpus are assumed to be secondary threads. + */ + if (system_state < SYSTEM_RUNNING && + cpu_has_feature(CPU_FTR_SMT) && + !smt_enabled_at_boot && nr % 2 != 0) + return 0; + + return 1; +} +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_cell_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_cell_cpu_bootable, +}; + +/* This is called very early */ +void __init smp_init_cell(void) +{ + int i; + + DBG(" -> smp_init_cell()\n"); + + smp_ops = &bpa_iic_smp_ops; + + /* Mark threads which are still spinning in hold loops. */ + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { + if (i % 2 == 0) + /* + * Even-numbered logical cpus correspond to + * primary threads. + */ + cpu_set(i, of_spin_map); + } + } else { + of_spin_map = cpu_present_map; + } + + cpu_clear(boot_cpuid, of_spin_map); + + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = cell_give_timebase; + smp_ops->take_timebase = cell_take_timebase; + } + + DBG(" <- smp_init_cell()\n"); +} diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index d5c9a02fb119..e74132188bdf 100644 --- a/arch/ppc64/kernel/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -27,7 +27,7 @@ #include <asm/prom.h> #include <asm/io.h> -#include "bpa_iic.h" +#include "interrupt.h" /* register layout taken from Spider spec, table 7.4-4 */ enum { diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 4ac7125aa09c..150f67d6f90c 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -17,6 +17,7 @@ #include <asm/uaccess.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/rtas.h> #include "chrp.h" static unsigned int nvram_size; @@ -25,7 +26,8 @@ static DEFINE_SPINLOCK(nvram_lock); static unsigned char chrp_nvram_read(int addr) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; unsigned char ret; if (addr >= nvram_size) { @@ -34,7 +36,8 @@ static unsigned char chrp_nvram_read(int addr) return 0xff; } spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) ret = 0xff; else ret = nvram_buf[0]; @@ -45,7 +48,8 @@ static unsigned char chrp_nvram_read(int addr) static void chrp_nvram_write(int addr, unsigned char val) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; if (addr >= nvram_size) { printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", @@ -54,7 +58,8 @@ static void chrp_nvram_write(int addr, unsigned char val) } spin_lock_irqsave(&nvram_lock, flags); nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); spin_unlock_irqrestore(&nvram_lock, flags); } diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index a9052305c35d..29c86781c493 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <linux/mv643xx.h> #include <linux/pci.h> diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 31ee49c25014..bb2315997d45 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -35,43 +35,6 @@ #include <asm/smp.h> #include <asm/mpic.h> -extern unsigned long smp_chrp_cpu_nr; - -static int __init smp_chrp_probe(void) -{ - struct device_node *cpus = NULL; - unsigned int *reg; - int reglen; - int ncpus = 0; - int cpuid; - unsigned int phys; - - /* Count CPUs in the device-tree */ - cpuid = 1; /* the boot cpu is logical cpu 0 */ - while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) { - phys = ncpus; - reg = (unsigned int *) get_property(cpus, "reg", ®len); - if (reg && reglen >= sizeof(unsigned int)) - /* hmmm, not having a reg property would be bad */ - phys = *reg; - if (phys != boot_cpuid_phys) { - set_hard_smp_processor_id(cpuid, phys); - ++cpuid; - } - ++ncpus; - } - - printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - mpic_request_ipis(); - - return ncpus; -} - static void __devinit smp_chrp_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; @@ -114,7 +77,7 @@ void __devinit smp_chrp_take_timebase(void) /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, - .probe = smp_chrp_probe, + .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, .give_timebase = smp_chrp_give_timebase, diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h index 321f3bb7a8f5..a843b0f87b72 100644 --- a/arch/powerpc/platforms/iseries/call_hpt.h +++ b/arch/powerpc/platforms/iseries/call_hpt.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/mmu.h> #define HvCallHptGetHptAddress HvCallHpt + 0 diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h index a86e065b9577..59d4e0ad5cf3 100644 --- a/arch/powerpc/platforms/iseries/call_pci.h +++ b/arch/powerpc/platforms/iseries/call_pci.h @@ -25,8 +25,8 @@ #ifndef _PLATFORMS_ISERIES_CALL_PCI_H #define _PLATFORMS_ISERIES_CALL_PCI_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> /* * DSA == Direct Select Address diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h index ef223166cf22..c7e251619f48 100644 --- a/arch/powerpc/platforms/iseries/call_sm.h +++ b/arch/powerpc/platforms/iseries/call_sm.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c index f61e2e9ac9ec..62ec73479687 100644 --- a/arch/powerpc/platforms/iseries/hvlog.c +++ b/arch/powerpc/platforms/iseries/hvlog.c @@ -9,9 +9,9 @@ #include <asm/page.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> void HvCall_writeLogBuffer(const void *buffer, u64 len) diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c index dc28621aea0d..663a1affb4bb 100644 --- a/arch/powerpc/platforms/iseries/hvlpconfig.c +++ b/arch/powerpc/platforms/iseries/hvlpconfig.c @@ -17,7 +17,7 @@ */ #include <linux/module.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> HvLpIndex HvLpConfig_getLpIndex_outline(void) { diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 1db26d8be640..1a6845b5c5a4 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -32,7 +32,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_call_xm.h> extern struct list_head iSeries_Global_Device_List; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 937ac99b9d33..c1135912cc05 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -36,9 +36,9 @@ #include <linux/spinlock.h> #include <asm/ppcdebug.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_xm.h> #include "irq.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c index f271b3539721..a2200842f4e5 100644 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <asm/hw_irq.h> -#include <asm/iSeries/HvCallSc.h> +#include <asm/iseries/hv_call_sc.h> EXPORT_SYMBOL(HvCall0); EXPORT_SYMBOL(HvCall1); diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index ed2ffee6f731..bb8c91537f35 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -13,16 +13,16 @@ #include <linux/bitops.h> #include <asm/processor.h> #include <asm/ptrace.h> -#include <asm/naca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpRegSave.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> -#include <asm/iSeries/LparMap.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/lpar_map.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/it_lp_queue.h> +#include "naca.h" #include "vpd_areas.h" #include "spcomm_area.h" #include "ipl_parms.h" diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 54c7753dbe05..e9fb98bf895f 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -17,10 +17,10 @@ #include <asm/system.h> #include <asm/paca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/it_lp_naca.h> /* * The LpQueue is used to pass event data from the hypervisor to diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index e5de31aa0015..49e7e4b85847 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -38,10 +38,10 @@ #include <asm/uaccess.h> #include <asm/paca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/it_lp_queue.h> #include "setup.h" diff --git a/include/asm-ppc64/naca.h b/arch/powerpc/platforms/iseries/naca.h index d2afe6447597..ab2372eb8d2e 100644 --- a/include/asm-ppc64/naca.h +++ b/arch/powerpc/platforms/iseries/naca.h @@ -1,7 +1,7 @@ -#ifndef _NACA_H -#define _NACA_H +#ifndef _PLATFORMS_ISERIES_NACA_H +#define _PLATFORMS_ISERIES_NACA_H -/* +/* * c 2001 PPC 64 Team, IBM Corp * * This program is free software; you can redistribute it and/or @@ -21,4 +21,4 @@ struct naca_struct { extern struct naca_struct naca; -#endif /* _NACA_H */ +#endif /* _PLATFORMS_ISERIES_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 959e59fd9c11..7d7d5884343f 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -36,8 +36,8 @@ #include <asm/iommu.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/mf.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/mf.h> #include <asm/ppc-pci.h> diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index 6f1929cac66b..e68b6b5fa89f 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,8 +24,8 @@ #include <asm/processor.h> #include <asm/time.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #include "processor_vpd.h" #include "main_store.h" diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index c68b9c3e5caf..66189fd2e32d 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -24,7 +24,7 @@ * address of the OS's NACA). */ #include <asm/types.h> -#include <asm/naca.h> +#include "naca.h" /* * When we IPL a secondary partition, we will check if if the diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 1544c6f10a38..fda712b42168 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -27,6 +27,7 @@ #include <linux/kdev_t.h> #include <linux/major.h> #include <linux/root_dev.h> +#include <linux/kernel.h> #include <asm/processor.h> #include <asm/machdep.h> @@ -40,19 +41,19 @@ #include <asm/firmware.h> #include <asm/time.h> -#include <asm/naca.h> #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/LparMap.h> - +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/lpar_map.h> + +#include "naca.h" #include "setup.h" #include "irq.h" #include "vpd_areas.h" @@ -94,6 +95,8 @@ extern unsigned long iSeries_recal_titan; static int mf_initialized; +static unsigned long cmd_mem_limit; + struct MemoryBlock { unsigned long absStart; unsigned long absEnd; @@ -341,23 +344,6 @@ static void __init iSeries_init_early(void) */ iommu_init_early_iSeries(); - iSeries_get_cmdline(); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - /* Parse early parameters, in particular mem=x */ - parse_early_param(); - - if (memory_limit) { - if (memory_limit < systemcfg->physicalMemorySize) - systemcfg->physicalMemorySize = memory_limit; - else { - printk("Ignoring mem=%lu >= ram_top.\n", memory_limit); - memory_limit = 0; - } - } - /* Initialize machine-dependency vectors */ #ifdef CONFIG_SMP smp_init_iSeries(); @@ -971,6 +957,8 @@ void build_flat_dt(struct iseries_flat_dt *dt) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + if (cmd_mem_limit) + dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); dt_cpus(dt); @@ -990,7 +978,27 @@ void * __init iSeries_early_setup(void) */ build_iSeries_Memory_Map(); + iSeries_get_cmdline(); + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + + /* Parse early parameters, in particular mem=x */ + parse_early_param(); + build_flat_dt(&iseries_dt); return (void *) __pa(&iseries_dt); } + +/* + * On iSeries we just parse the mem=X option from the command line. + * On pSeries it's a bit more complicated, see prom_init_mem() + */ +static int __init early_parsemem(char *p) +{ + if (p) + cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE); + return 0; +} +early_param("mem", early_parsemem); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index f720916682f6..3336bad67724 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -38,7 +38,7 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #include <asm/time.h> #include <asm/ppcdebug.h> #include <asm/machdep.h> diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index c0f7d2e9153f..c27a66876c2c 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -17,10 +17,10 @@ #include <asm/tce.h> #include <asm/abs_addr.h> #include <asm/page.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_xm.h> struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index c0c767bd37f1..fe97bfbf7463 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -41,12 +41,12 @@ #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/vio.h> /* Status of the path to each other partition in the system. * This is overkill, since we will only ever establish connections diff --git a/arch/powerpc/platforms/iseries/vpdinfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c index 9c318849dee7..23a6d1e5b429 100644 --- a/arch/powerpc/platforms/iseries/vpdinfo.c +++ b/arch/powerpc/platforms/iseries/vpdinfo.c @@ -32,7 +32,7 @@ #include <asm/resource.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_types.h> #include "pci.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 0037a8c8c81f..83a49e80ac29 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -576,7 +576,7 @@ void __init pmac_pic_init(void) #endif /* CONFIG_PPC32 */ } -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) /* * These procedures are used in implementing sleep on the powerbooks. * sleep_save_intrs() saves the states of all interrupt enables @@ -643,7 +643,7 @@ static int pmacpic_resume(struct sys_device *sysdev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmacpic_sysclass = { set_kset_name("pmac_pic"), @@ -655,10 +655,10 @@ static struct sys_device device_pmacpic = { }; static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) .suspend = &pmacpic_suspend, .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ }; static int __init init_pmacpic_sysfs(void) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 6f62af597291..80b58c1ec412 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -75,6 +75,7 @@ #include <asm/smu.h> #include <asm/pmc.h> #include <asm/mpic.h> +#include <asm/lmb.h> #include "pmac.h" @@ -350,7 +351,7 @@ void __init pmac_setup_arch(void) find_via_pmu(); smu_init(); -#ifdef CONFIG_NVRAM +#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) pmac_nvram_init(); #endif diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 2d57f588151d..e3fc3407bb1f 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -21,15 +21,6 @@ config EEH depends on PPC_PSERIES default y if !EMBEDDED -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - config SCANLOG tristate "Scanlog dump interface" depends on RTAS_PROC && PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 5ef494e3a70f..b9938fece781 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,5 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o rtas-fw.o ras.o + setup.o iommu.o ras.o rtasd.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 9e90d41131d8..513e27231493 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -42,13 +42,14 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include "plpar_wrappers.h" + #define DBG(fmt...) extern int is_python(struct device_node *); @@ -498,7 +499,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case PSERIES_RECONFIG_REMOVE: - if (pci->iommu_table && + if (pci && pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 268d8362dde7..e384a5a91796 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -38,7 +38,8 @@ #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> -#include <asm/plpar_wrappers.h> + +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -260,22 +261,18 @@ out: void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); - unsigned long vpa = (unsigned long)&(paca[cpu].lppaca); + unsigned long vpa = __pa(&paca[cpu].lppaca); long ret; - unsigned long flags; - - /* Register the Virtual Processor Area (VPA) */ - flags = 1UL << (63 - 18); if (cpu_has_feature(CPU_FTR_ALTIVEC)) paca[cpu].lppaca.vmxregs_in_use = 1; - ret = register_vpa(flags, hwcpu, __pa(vpa)); + ret = register_vpa(hwcpu, vpa); if (ret) printk(KERN_ERR "WARNING: vpa_init: VPA registration for " "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, __pa(vpa), ret); + cpu, hwcpu, vpa, ret); } long pSeries_lpar_hpte_insert(unsigned long hpte_group, diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h new file mode 100644 index 000000000000..382f8c5b0e7c --- /dev/null +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -0,0 +1,120 @@ +#ifndef _PSERIES_PLPAR_WRAPPERS_H +#define _PSERIES_PLPAR_WRAPPERS_H + +#include <asm/hvcall.h> + +static inline long poll_pending(void) +{ + unsigned long dummy; + return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, &dummy, &dummy, &dummy); +} + +static inline long prod_processor(void) +{ + plpar_hcall_norets(H_PROD); + return 0; +} + +static inline long cede_processor(void) +{ + plpar_hcall_norets(H_CEDE); + return 0; +} + +static inline long vpa_call(unsigned long flags, unsigned long cpu, + unsigned long vpa) +{ + /* flags are in bits 16-18 (counting from most significant bit) */ + flags = flags << (63 - 18); + + return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); +} + +static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x5, cpu, vpa); +} + +static inline long register_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x1, cpu, vpa); +} + +extern void vpa_init(int cpu); + +static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_read(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_READ, flags, ptex, 0, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex, + unsigned long avpn) +{ + return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); +} + +static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba, + unsigned long *tce_ret) +{ + unsigned long dummy; + return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, tce_ret, &dummy, + &dummy); +} + +static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba, + unsigned long tceval) +{ + return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); +} + +static inline long plpar_tce_put_indirect(unsigned long liobn, + unsigned long ioba, unsigned long page, unsigned long count) +{ + return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); +} + +static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba, + unsigned long tceval, unsigned long count) +{ + return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); +} + +static inline long plpar_get_term_char(unsigned long termno, + unsigned long *len_ret, char *buf_ret) +{ + unsigned long *lbuf = (unsigned long *)buf_ret; /* TODO: alignment? */ + return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, len_ret, + lbuf + 0, lbuf + 1); +} + +static inline long plpar_put_term_char(unsigned long termno, unsigned long len, + const char *buffer) +{ + unsigned long *lbuf = (unsigned long *)buffer; /* TODO: alignment? */ + return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0], + lbuf[1]); +} + +static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) +{ + return plpar_hcall_norets(H_SET_XDABR, address, flags); +} + +static inline long plpar_set_dabr(unsigned long val) +{ + return plpar_hcall_norets(H_SET_DABR, val); +} + +#endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c deleted file mode 100644 index 15d81d758ca0..000000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * - * Procedures for firmware flash updates on pSeries systems. - * - * Peter Bergner, IBM March 2001. - * Copyright (C) 2001 IBM. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <stdarg.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/semaphore.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/param.h> -#include <asm/system.h> -#include <asm/abs_addr.h> -#include <asm/udbg.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/systemcfg.h> - -#include "rtas-fw.h" - -struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; - -#define FLASH_BLOCK_LIST_VERSION (1UL) - -static void rtas_flash_firmware(void) -{ - unsigned long image_size; - struct flash_block_list *f, *next, *flist; - unsigned long rtas_block_list; - int i, status, update_token; - - update_token = rtas_token("ibm,update-flash-64-and-reboot"); - if (update_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); - printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); - return; - } - - /* NOTE: the "first" block list is a global var with no data - * blocks in the kernel data segment. We do this because - * we want to ensure this block_list addr is under 4GB. - */ - rtas_firmware_flash_list.num_blocks = 0; - flist = (struct flash_block_list *)&rtas_firmware_flash_list; - rtas_block_list = virt_to_abs(flist); - if (rtas_block_list >= 4UL*1024*1024*1024) { - printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); - return; - } - - printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); - /* Update the block_list in place. */ - image_size = 0; - for (f = flist; f; f = next) { - /* Translate data addrs to absolute */ - for (i = 0; i < f->num_blocks; i++) { - f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); - image_size += f->blocks[i].length; - } - next = f->next; - /* Don't translate NULL pointer for last entry */ - if (f->next) - f->next = (struct flash_block_list *)virt_to_abs(f->next); - else - f->next = NULL; - /* make num_blocks into the version/length field */ - f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); - } - - printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); - printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - rtas_progress("Flashing \n", 0x0); - rtas_progress("Please Wait... ", 0x0); - printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); - status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); - switch (status) { /* should only get "bad" status */ - case 0: - printk(KERN_ALERT "FLASH: success\n"); - break; - case -1: - printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); - break; - case -3: - printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); - break; - case -4: - printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); - break; - default: - printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); - break; - } -} - -void rtas_flash_bypass_warning(void) -{ - printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); - printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); -} - - -void rtas_fw_restart(char *cmd) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_firmware(); - rtas_restart(cmd); -} - -void rtas_fw_power_off(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_power_off(); -} - -void rtas_fw_halt(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_halt(); -} - -EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h deleted file mode 100644 index e70fa69974a3..000000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.h +++ /dev/null @@ -1,3 +0,0 @@ -void rtas_fw_restart(char *cmd); -void rtas_fw_power_off(void); -void rtas_fw_halt(void); diff --git a/arch/ppc64/kernel/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b0420b6dd..e26b0420b6dd 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 10cb0f2d9b5b..65bee939eecc 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -58,7 +58,6 @@ #include <asm/irq.h> #include <asm/time.h> #include <asm/nvram.h> -#include <asm/plpar_wrappers.h> #include "xics.h" #include <asm/firmware.h> #include <asm/pmc.h> @@ -67,7 +66,7 @@ #include <asm/i8259.h> #include <asm/udbg.h> -#include "rtas-fw.h" +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -352,6 +351,16 @@ static void pSeries_mach_cpu_die(void) for(;;); } +static int pseries_set_dabr(unsigned long dabr) +{ + if (firmware_has_feature(FW_FEATURE_XDABR)) { + /* We want to catch accesses from kernel and userspace */ + return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER); + } + + return plpar_set_dabr(dabr); +} + /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -387,6 +396,8 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } + if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR)) + ppc_md.set_dabr = pseries_set_dabr; iommu_init_early_pSeries(); @@ -591,9 +602,9 @@ struct machdep_calls __initdata pSeries_md = { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, - .restart = rtas_fw_restart, - .power_off = rtas_fw_power_off, - .halt = rtas_fw_halt, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 9c9458ddfc25..7a243e8ccd7e 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -44,10 +44,11 @@ #include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include "plpar_wrappers.h" + #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8acd21dee05d..6b7efcfc352a 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o diff --git a/include/asm-ppc64/dart.h b/arch/powerpc/sysdev/dart.h index cdf8a2dec05f..ea8f0d9eed8a 100644 --- a/include/asm-ppc64/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -16,8 +16,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ASM_DART_H -#define _ASM_DART_H +#ifndef _POWERPC_SYSDEV_DART_H +#define _POWERPC_SYSDEV_DART_H /* physical base of DART registers */ @@ -56,4 +56,4 @@ #define DART_PAGE_FACTOR (PAGE_SHIFT - DART_PAGE_SHIFT) -#endif +#endif /* _POWERPC_SYSDEV_DART_H */ diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c index 06a119cfceb5..74e0d31a3559 100644 --- a/arch/ppc64/kernel/bpa_nvram.c +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -1,5 +1,5 @@ /* - * NVRAM for CPBW + * memory mapped NVRAM * * (C) Copyright IBM Corp. 2005 * @@ -30,54 +30,54 @@ #include <asm/nvram.h> #include <asm/prom.h> -static void __iomem *bpa_nvram_start; -static long bpa_nvram_len; -static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; +static void __iomem *mmio_nvram_start; +static long mmio_nvram_len; +static spinlock_t mmio_nvram_lock = SPIN_LOCK_UNLOCKED; -static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_fromio(buf, bpa_nvram_start + *index, count); + memcpy_fromio(buf, mmio_nvram_start + *index, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_toio(bpa_nvram_start + *index, buf, count); + memcpy_toio(mmio_nvram_start + *index, buf, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_get_size(void) +static ssize_t mmio_nvram_get_size(void) { - return bpa_nvram_len; + return mmio_nvram_len; } -int __init bpa_nvram_init(void) +int __init mmio_nvram_init(void) { struct device_node *nvram_node; unsigned long *buffer; @@ -97,20 +97,20 @@ int __init bpa_nvram_init(void) ret = -ENODEV; nvram_addr = buffer[0]; - bpa_nvram_len = buffer[1]; - if ( (!bpa_nvram_len) || (!nvram_addr) ) + mmio_nvram_len = buffer[1]; + if ( (!mmio_nvram_len) || (!nvram_addr) ) goto out; - bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); - if (!bpa_nvram_start) + mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len); + if (!mmio_nvram_start) goto out; - printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", - bpa_nvram_len >> 10, bpa_nvram_start); + printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n", + mmio_nvram_len >> 10, mmio_nvram_start); - ppc_md.nvram_read = bpa_nvram_read; - ppc_md.nvram_write = bpa_nvram_write; - ppc_md.nvram_size = bpa_nvram_get_size; + ppc_md.nvram_read = mmio_nvram_read; + ppc_md.nvram_write = mmio_nvram_write; + ppc_md.nvram_size = mmio_nvram_get_size; out: of_node_put(nvram_node); diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index fba871a1bda5..607722178c1a 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -1,5 +1,5 @@ /* - * arch/ppc64/kernel/u3_iommu.c + * arch/powerpc/sysdev/u3_iommu.c * * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation * @@ -44,9 +44,10 @@ #include <asm/abs_addr.h> #include <asm/cacheflush.h> #include <asm/lmb.h> -#include <asm/dart.h> #include <asm/ppc-pci.h> +#include "dart.h" + extern int iommu_force_on; /* Physical base address and size of the DART table */ diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index b42789f8eb76..579cd40258b9 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -388,9 +388,8 @@ void m8xx_cpm_dpinit(void) /* * Allocate the requested size worth of DP memory. - * This function used to return an index into the DPRAM area. - * Now it returns the actuall physical address of that area. - * use m8xx_cpm_dpram_offset() to get the index + * This function returns an offset into the DPRAM area. + * Use cpm_dpram_addr() to get the virtual address of the area. */ uint cpm_dpalloc(uint size, uint align) { diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 94d5716fa7c3..e719a4933af1 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -66,7 +66,8 @@ head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ arch/ppc/platforms/ \ arch/ppc/mm/ arch/ppc/lib/ \ - arch/ppc/syslib/ arch/powerpc/sysdev/ + arch/ppc/syslib/ arch/powerpc/sysdev/ \ + arch/powerpc/lib/ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b35346df1e37..c610ca933a25 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o diff --git a/arch/ppc/kernel/bitops.c b/arch/ppc/kernel/bitops.c deleted file mode 100644 index 7f53d193968b..000000000000 --- a/arch/ppc/kernel/bitops.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ - -#include <linux/kernel.h> -#include <linux/bitops.h> - -/* - * If the bitops are not inlined in bitops.h, they are defined here. - * -- paulus - */ -#if !__INLINE_BITOPS -void set_bit(int nr, volatile void * addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - or %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc" ); -} - -void clear_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - andc %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -void change_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - xor %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -int test_and_set_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - or %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_clear_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - andc %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_change_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - xor %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} -#endif /* !__INLINE_BITOPS */ diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c index 772e428aaa59..fbb2b9f8922c 100644 --- a/arch/ppc/kernel/irq.c +++ b/arch/ppc/kernel/irq.c @@ -126,7 +126,7 @@ skip: seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); } #endif -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) /* should this be per processor send/receive? */ seq_printf(p, "IPI (recv/sent): %10u/%u\n", atomic_read(&ipi_recv), atomic_read(&ipi_sent)); diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c index a72787747df7..a882b0dbe8de 100644 --- a/arch/ppc/kernel/machine_kexec.c +++ b/arch/ppc/kernel/machine_kexec.c @@ -32,7 +32,7 @@ const extern unsigned int relocate_new_kernel_size; * Provide a dummy crash_notes definition while crash dump arrives to ppc. * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. */ -void *crash_notes = NULL; +note_buf_t crash_notes[NR_CPUS]; void machine_shutdown(void) { diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index ae24196d78f6..e0ca61b37f4f 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -131,6 +131,11 @@ EXPORT_SYMBOL(outw); EXPORT_SYMBOL(outl); EXPORT_SYMBOL(outsl);*/ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f265b81e7008..16adde6b429d 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -606,22 +606,22 @@ int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 97ffbc70574f..1cc3abe6fa43 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -45,6 +45,7 @@ #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/xmon.h> +#include <asm/ppc_sys.h> #include "ppc8xx_pic.h" diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 42677cc96508..b987164fca4c 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -89,12 +89,14 @@ config PPC_PMAC bool " Apple G5 based machines" default y select U3_DART + select GENERIC_TBSYNC config PPC_MAPLE depends on PPC_MULTIPLATFORM bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. @@ -182,6 +184,9 @@ config MPIC_BROKEN_U3 depends on PPC_MAPLE default y +config GENERIC_TBSYNC + def_bool n + config PPC_PMAC64 bool depends on PPC_PMAC diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index fdbd6f44adc0..a55a82d145d4 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -86,7 +86,6 @@ head-y := arch/ppc64/kernel/head.o head-y += arch/powerpc/kernel/fpu.o head-y += arch/powerpc/kernel/entry_64.o -libs-y += arch/ppc64/lib/ core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ core-y += arch/powerpc/mm/ core-y += arch/powerpc/sysdev/ diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 327c08ce4291..c441aebe7648 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,8 +12,7 @@ obj-y := misc.o prom.o endif obj-y += irq.o idle.o dma.o \ - signal.o \ - align.o bitops.o pacaData.o \ + align.o pacaData.o \ udbg.o ioctl32.o \ rtc.o \ cpu_setup_power4.o \ @@ -29,22 +28,16 @@ ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o endif -obj-$(CONFIG_PPC_PSERIES) += rtasd.o udbg_16550.o - -obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ - bpa_iic.o spider-pic.o +obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_KEXEC) += machine_kexec.o obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o -obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o -obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o @@ -57,11 +50,6 @@ obj-$(CONFIG_PPC_PMAC) += udbg_scc.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o -ifdef CONFIG_SMP -obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o -obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o -endif - obj-$(CONFIG_KPROBES) += kprobes.o CFLAGS_ioctl32.o += -Ifs/ diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 5e6046cb414e..504dee836d29 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -31,7 +31,7 @@ #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/rtas.h> #include <asm/cputable.h> #include <asm/cache.h> diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 929f9f42cf7a..db1cf397be2d 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -35,7 +35,7 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -1914,24 +1914,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c index f41afe545045..87474584033f 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/ppc64/kernel/irq.c @@ -52,7 +52,7 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/it_lp_queue.h> #include <asm/machdep.h> #include <asm/paca.h> @@ -392,7 +392,7 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ - if (ppc64_interrupt_controller == IC_BPA_IIC) + if (ppc64_interrupt_controller == IC_CELL_PIC) return real_irq; /* no mapping for iic either */ /* don't map interrupts < MIN_VIRT_IRQ */ diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c index cae19bbd5acd..e86155770bbc 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/ppc64/kernel/lparcfg.c @@ -26,14 +26,14 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> #include <asm/lppaca.h> #include <asm/hvcall.h> #include <asm/firmware.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/iseries/it_exp_vpd_panel.h> #include <asm/prom.h> #define MODULE_VERS "1.6" diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c index bf7cc4f8210f..ff8679f260f3 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/ppc64/kernel/machine_kexec.c @@ -244,7 +244,6 @@ static void kexec_prepare_cpus(void) static void kexec_prepare_cpus(void) { - extern void smp_release_cpus(void); /* * move the secondarys to us so that we can copy * the new kernel 0-0x100 safely diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c index 33a2d8db3f21..5e27e5a6a35d 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/ppc64/kernel/pacaData.c @@ -17,7 +17,7 @@ #include <asm/page.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> static union { diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index 493bbe43f5b4..1a443a7ada4c 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -181,13 +181,14 @@ EXPORT_SYMBOL(fetch_dev_dn); static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) { struct device_node *np = node; - struct pci_dn *pci; + struct pci_dn *pci = NULL; int err = NOTIFY_OK; switch (action) { case PSERIES_RECONFIG_ADD: pci = np->parent->data; - update_dn_pci_info(np, pci->phb); + if (pci) + update_dn_pci_info(np, pci->phb); break; default: err = NOTIFY_DONE; diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c index a87c66a9652a..24e955ee9487 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/ppc64/kernel/proc_ppc64.c @@ -53,7 +53,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) + if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) return 0; if (!proc_mkdir("rtas", root)) diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 69924ba4d7d9..a4bbca6dbb8b 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -1939,9 +1939,9 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long prom_send_capabilities(); /* - * On pSeries and BPA, copy the CPU hold code + * On pSeries and Cell, copy the CPU hold code */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/ppc64/kernel/udbg_scc.c index c47fd6c63531..820c53551507 100644 --- a/arch/ppc64/kernel/udbg_scc.c +++ b/arch/ppc64/kernel/udbg_scc.c @@ -12,7 +12,6 @@ #include <linux/types.h> #include <asm/udbg.h> #include <asm/processor.h> -#include <asm/naca.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/pmac_feature.h> diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile deleted file mode 100644 index 42d5295bf345..000000000000 --- a/arch/ppc64/lib/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for ppc64-specific library files.. -# - -lib-y := string.o diff --git a/arch/ppc64/lib/string.S b/arch/ppc64/lib/string.S deleted file mode 100644 index e21a0038a4d6..000000000000 --- a/arch/ppc64/lib/string.S +++ /dev/null @@ -1,179 +0,0 @@ -/* - * String handling functions for PowerPC. - * - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/processor.h> -#include <asm/errno.h> -#include <asm/ppc_asm.h> - -_GLOBAL(strcpy) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strncpy) - cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - blr - -_GLOBAL(strcat) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r5) - cmpwi 0,r0,0 - bne 1b - addi r5,r5,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strcmp) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r5) - cmpwi 1,r3,0 - lbzu r0,1(r4) - subf. r3,r0,r3 - beqlr 1 - beq 1b - blr - -_GLOBAL(strlen) - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - -_GLOBAL(memcmp) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr -2: li r3,0 - blr - -_GLOBAL(memchr) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r3,r3,-1 -1: lbzu r0,1(r3) - cmpw 0,r0,r4 - bdnzf 2,1b - beqlr -2: li r3,0 - blr - -_GLOBAL(__clear_user) - addi r6,r3,-4 - li r3,0 - li r5,0 - cmplwi 0,r4,4 - blt 7f - /* clear a single word */ -11: stwu r5,4(r6) - beqlr - /* clear word sized chunks */ - andi. r0,r6,3 - add r4,r0,r4 - subf r6,r0,r6 - srwi r0,r4,2 - andi. r4,r4,3 - mtctr r0 - bdz 7f -1: stwu r5,4(r6) - bdnz 1b - /* clear byte sized chunks */ -7: cmpwi 0,r4,0 - beqlr - mtctr r4 - addi r6,r6,3 -8: stbu r5,1(r6) - bdnz 8b - blr -90: mr r3,r4 - blr -91: mfctr r3 - slwi r3,r3,2 - add r3,r3,r4 - blr -92: mfctr r3 - blr - - .section __ex_table,"a" - .align 3 - .llong 11b,90b - .llong 1b,91b - .llong 8b,92b - .text - -/* r3 = dst, r4 = src, r5 = count */ -_GLOBAL(__strncpy_from_user) - addi r6,r3,-1 - addi r4,r4,-1 - cmpwi 0,r5,0 - beq 2f - mtctr r5 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - beq 3f -2: addi r6,r6,1 -3: subf r3,r3,r6 - blr -99: li r3,-EFAULT - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b - .text - -/* r3 = str, r4 = len (> 0) */ -_GLOBAL(__strnlen_user) - addi r7,r3,-1 - mtctr r4 /* ctr = len */ -1: lbzu r0,1(r7) /* get next byte */ - cmpwi 0,r0,0 - bdnzf 2,1b /* loop if --ctr != 0 && byte != 0 */ - addi r7,r7,1 - subf r3,r3,r7 /* number of bytes we have looked at */ - beqlr /* return if we found a 0 byte */ - cmpw 0,r3,r4 /* did we look at all len bytes? */ - blt 99f /* if not, must have hit top */ - addi r3,r4,1 /* return len + 1 to indicate no null found */ - blr -99: li r3,0 /* bad address, return 0 */ - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index 709f809f79f1..2d518aa2720a 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -45,10 +45,10 @@ #include <asm/uaccess.h> #include <asm/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/vio.h> MODULE_DESCRIPTION("iSeries Virtual DASD"); MODULE_AUTHOR("Dave Boutcher"); diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 36f31d202223..b5191780ecca 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -46,9 +46,9 @@ #include <asm/vio.h> #include <asm/scatterlist.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/vio.h> #define VIOCD_DEVICE "iseries/vcd" #define VIOCD_DEVICE_DEVFS "iseries/vcd" diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index 44f5fb4a46ef..98601c7d04a9 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -44,12 +44,12 @@ #include <linux/tty_flip.h> #include <linux/sysrq.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/vio.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call.h> #ifdef CONFIG_VT #error You must turn off CONFIG_VT to use CONFIG_VIOCONS diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index 51abd3defc1c..867cc4e418c7 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -29,7 +29,7 @@ * * All tape operations are performed by sending messages back and forth to * the OS/400 partition. The format of the messages is defined in - * iSeries/vio.h + * iseries/vio.h */ #include <linux/config.h> #include <linux/version.h> @@ -54,10 +54,10 @@ #include <asm/ioctls.h> #include <asm/vio.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_lp_config.h> #define VIOTAPE_VERSION "1.2" #define VIOTAPE_MAXREQ 1 diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 91920a1140fa..9bc6cc6e3845 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -155,10 +155,10 @@ static spinlock_t pmu_lock; static u8 pmu_intr_mask; static int pmu_version; static int drop_interrupts; -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) static int option_lid_wakeup = 1; static int sleep_in_progress; -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static unsigned long async_req_locks; static unsigned int pmu_irq_stats[11]; @@ -865,7 +865,7 @@ proc_read_options(char *page, char **start, off_t off, { char *p = page; -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) if (pmu_kind == PMU_KEYLARGO_BASED && pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup); @@ -906,7 +906,7 @@ proc_write_options(struct file *file, const char __user *buffer, *(val++) = 0; while(*val == ' ') val++; -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) if (pmu_kind == PMU_KEYLARGO_BASED && pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0) if (!strcmp(label, "lid_wakeup")) @@ -2063,6 +2063,9 @@ pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n) n->list.next = NULL; return 0; } +#endif /* CONFIG_PM */ + +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) /* Sleep is broadcast last-to-first */ static int @@ -2687,7 +2690,7 @@ powerbook_sleep_3400(void) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ /* * Support for /dev/pmu device @@ -2871,7 +2874,7 @@ pmu_ioctl(struct inode * inode, struct file *filp, int error = -EINVAL; switch (cmd) { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) case PMU_IOC_SLEEP: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -2899,7 +2902,7 @@ pmu_ioctl(struct inode * inode, struct file *filp, return put_user(0, argp); else return put_user(1, argp); -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ #ifdef CONFIG_PMAC_BACKLIGHT /* Backlight should have its own device or go via @@ -3047,7 +3050,7 @@ pmu_polled_request(struct adb_request *req) * to do suspend-to-disk. */ -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) static int pmu_sys_suspended = 0; @@ -3082,7 +3085,7 @@ static int pmu_sys_resume(struct sys_device *sysdev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmu_sysclass = { set_kset_name("pmu"), @@ -3094,10 +3097,10 @@ static struct sys_device device_pmu = { }; static struct sysdev_driver driver_pmu = { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) .suspend = &pmu_sys_suspend, .resume = &pmu_sys_resume, -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ }; static int __init init_pmu_sysfs(void) @@ -3135,12 +3138,12 @@ EXPORT_SYMBOL(pmu_i2c_combined_read); EXPORT_SYMBOL(pmu_i2c_stdsub_write); EXPORT_SYMBOL(pmu_i2c_simple_read); EXPORT_SYMBOL(pmu_i2c_simple_write); -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) EXPORT_SYMBOL(pmu_register_sleep_notifier); EXPORT_SYMBOL(pmu_unregister_sleep_notifier); EXPORT_SYMBOL(pmu_enable_irled); EXPORT_SYMBOL(pmu_battery_count); EXPORT_SYMBOL(pmu_batteries); EXPORT_SYMBOL(pmu_power_flags); -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index f5ea39ff1017..d86d8f055a6c 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -72,12 +72,12 @@ #include <linux/ethtool.h> #include <asm/abs_addr.h> -#include <asm/iSeries/mf.h> +#include <asm/iseries/mf.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/iommu.h> #include <asm/vio.h> diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c index e9202f2a8276..1045872b0175 100644 --- a/drivers/scsi/ibmvscsi/iseries_vscsi.c +++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c @@ -28,10 +28,10 @@ * hypervisor system or a converged hypervisor system. */ -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_config.h> #include <asm/vio.h> #include <linux/device.h> #include "ibmvscsi.h" diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h new file mode 100644 index 000000000000..dc25c53704d5 --- /dev/null +++ b/include/asm-powerpc/bitops.h @@ -0,0 +1,437 @@ +/* + * PowerPC atomic bit operations. + * + * Merged version by David Gibson <david@gibson.dropbear.id.au>. + * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don + * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They + * originally took it from the ppc32 code. + * + * Within a word, bits are numbered LSB first. Lot's of places make + * this assumption by directly testing bits with (val & (1<<nr)). + * This can cause confusion for large (> 1 word) bitmaps on a + * big-endian system because, unlike little endian, the number of each + * bit depends on the word size. + * + * The bitop functions are defined to work on unsigned longs, so for a + * ppc64 system the bits end up numbered: + * |63..............0|127............64|191...........128|255...........196| + * and on ppc32: + * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| + * + * There are a few little-endian macros used mostly for filesystem + * bitmaps, these work on similar bit arrays layouts, but + * byte-oriented: + * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| + * + * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit + * number field needs to be reversed compared to the big-endian bit + * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_POWERPC_BITOPS_H +#define _ASM_POWERPC_BITOPS_H + +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <asm/atomic.h> +#include <asm/synch.h> + +/* + * clear_bit doesn't imply a memory barrier + */ +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + +#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) + +#ifdef CONFIG_PPC64 +#define LARXL "ldarx" +#define STCXL "stdcx." +#define CNTLZL "cntlzd" +#else +#define LARXL "lwarx" +#define STCXL "stwcx." +#define CNTLZL "cntlzw" +#endif + +static __inline__ void set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" LARXL " %0,0,%3 # set_bit\n" + "or %0,%0,%2\n" + PPC405_ERR77(0,%3) + STCXL " %0,0,%3\n" + "bne- 1b" + : "=&r"(old), "=m"(*p) + : "r"(mask), "r"(p), "m"(*p) + : "cc" ); +} + +static __inline__ void clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" LARXL " %0,0,%3 # set_bit\n" + "andc %0,%0,%2\n" + PPC405_ERR77(0,%3) + STCXL " %0,0,%3\n" + "bne- 1b" + : "=&r"(old), "=m"(*p) + : "r"(mask), "r"(p), "m"(*p) + : "cc" ); +} + +static __inline__ void change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long old; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( +"1:" LARXL " %0,0,%3 # set_bit\n" + "xor %0,%0,%2\n" + PPC405_ERR77(0,%3) + STCXL " %0,0,%3\n" + "bne- 1b" + : "=&r"(old), "=m"(*p) + : "r"(mask), "r"(p), "m"(*p) + : "cc" ); +} + +static __inline__ int test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + EIEIO_ON_SMP +"1:" LARXL " %0,0,%3 # test_and_set_bit\n" + "or %1,%0,%2 \n" + PPC405_ERR77(0,%3) + STCXL " %1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + EIEIO_ON_SMP +"1:" LARXL " %0,0,%3 # test_and_clear_bit\n" + "andc %1,%0,%2 \n" + PPC405_ERR77(0,%3) + STCXL " %1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ int test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + __asm__ __volatile__( + EIEIO_ON_SMP +"1:" LARXL " %0,0,%3 # test_and_change_bit\n" + "xor %1,%0,%2 \n" + PPC405_ERR77(0,%3) + STCXL " %1,0,%3 \n" + "bne- 1b" + ISYNC_ON_SMP + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return (old & mask) != 0; +} + +static __inline__ void set_bits(unsigned long mask, unsigned long *addr) +{ + unsigned long old; + + __asm__ __volatile__( +"1:" LARXL " %0,0,%3 # set_bit\n" + "or %0,%0,%2\n" + STCXL " %0,0,%3\n" + "bne- 1b" + : "=&r" (old), "=m" (*addr) + : "r" (mask), "r" (addr), "m" (*addr) + : "cc"); +} + +/* Non-atomic versions */ +static __inline__ int test_bit(unsigned long nr, + __const__ volatile unsigned long *addr) +{ + return 1UL & (addr[BITOP_WORD(nr)] >> (nr & (BITS_PER_LONG-1))); +} + +static __inline__ void __set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + *p |= mask; +} + +static __inline__ void __clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + *p &= ~mask; +} + +static __inline__ void __change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + + *p ^= mask; +} + +static __inline__ int __test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old = *p; + + *p = old | mask; + return (old & mask) != 0; +} + +static __inline__ int __test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old = *p; + + *p = old & ~mask; + return (old & mask) != 0; +} + +static __inline__ int __test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old = *p; + + *p = old ^ mask; + return (old & mask) != 0; +} + +/* + * Return the zero-based bit position (LE, not IBM bit numbering) of + * the most significant 1-bit in a double word. + */ +static __inline__ int __ilog2(unsigned long x) +{ + int lz; + + asm (CNTLZL " %0,%1" : "=r" (lz) : "r" (x)); + return BITS_PER_LONG - 1 - lz; +} + +/* + * Determines the bit position of the least significant 0 bit in the + * specified double word. The returned bit position will be + * zero-based, starting from the right side (63/31 - 0). + */ +static __inline__ unsigned long ffz(unsigned long x) +{ + /* no zero exists anywhere in the 8 byte area. */ + if ((x = ~x) == 0) + return BITS_PER_LONG; + + /* + * Calculate the bit position of the least signficant '1' bit in x + * (since x has been changed this will actually be the least signficant + * '0' bit in * the original x). Note: (x & -x) gives us a mask that + * is the least significant * (RIGHT-most) 1-bit of the value in x. + */ + return __ilog2(x & -x); +} + +static __inline__ int __ffs(unsigned long x) +{ + return __ilog2(x & -x); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __inline__ int ffs(int x) +{ + unsigned long i = (unsigned long)x; + return __ilog2(i & -i) + 1; +} + +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static __inline__ int fls(unsigned int x) +{ + int lz; + + asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); + return 32 - lz; +} + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ +#define hweight64(x) generic_hweight64(x) +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0) +unsigned long find_next_zero_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first set bit, not the number of the byte + * containing a bit. + */ +#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) +unsigned long find_next_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); + +/* Little-endian versions */ + +static __inline__ int test_le_bit(unsigned long nr, + __const__ unsigned long *addr) +{ + __const__ unsigned char *tmp = (__const__ unsigned char *) addr; + return (tmp[nr >> 3] >> (nr & 7)) & 1; +} + +#define __set_le_bit(nr, addr) \ + __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __clear_le_bit(nr, addr) \ + __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define test_and_set_le_bit(nr, addr) \ + test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define test_and_clear_le_bit(nr, addr) \ + test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define __test_and_set_le_bit(nr, addr) \ + __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) +#define __test_and_clear_le_bit(nr, addr) \ + __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) + +#define find_first_zero_le_bit(addr, size) find_next_zero_le_bit((addr), (size), 0) +unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset); + +/* Bitmap functions for the ext2 filesystem */ + +#define ext2_set_bit(nr,addr) \ + __test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_le_bit((nr), (unsigned long*)addr) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_le_bit((nr), (unsigned long*)addr) + +#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) + +#define ext2_find_first_zero_bit(addr, size) \ + find_first_zero_le_bit((unsigned long*)addr, size) +#define ext2_find_next_zero_bit(addr, size, off) \ + find_next_zero_le_bit((unsigned long*)addr, size, off) + +/* Bitmap functions for the minix filesystem. */ + +#define minix_test_and_set_bit(nr,addr) \ + __test_and_set_le_bit(nr, (unsigned long *)addr) +#define minix_set_bit(nr,addr) \ + __set_le_bit(nr, (unsigned long *)addr) +#define minix_test_and_clear_bit(nr,addr) \ + __test_and_clear_le_bit(nr, (unsigned long *)addr) +#define minix_test_bit(nr,addr) \ + test_le_bit(nr, (unsigned long *)addr) + +#define minix_find_first_zero_bit(addr,size) \ + find_first_zero_le_bit((unsigned long *)addr, size) + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is cleared. + */ +static inline int sched_find_first_bit(const unsigned long *b) +{ +#ifdef CONFIG_PPC64 + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 64; + return __ffs(b[2]) + 128; +#else + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 32; + if (unlikely(b[2])) + return __ffs(b[2]) + 64; + if (b[3]) + return __ffs(b[3]) + 96; + return __ffs(b[4]) + 128; +#endif +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h index e4d028e87020..d625ee55f957 100644 --- a/include/asm-powerpc/bug.h +++ b/include/asm-powerpc/bug.h @@ -12,20 +12,16 @@ #ifndef __ASSEMBLY__ #ifdef __powerpc64__ -#define BUG_TABLE_ENTRY(label, line, file, func) \ - ".llong " #label "\n .long " #line "\n .llong " #file ", " #func "\n" -#define TRAP_OP(ra, rb) "1: tdnei " #ra ", " #rb "\n" -#define DATA_TYPE long long +#define BUG_TABLE_ENTRY ".llong" +#define BUG_TRAP_OP "tdnei" #else -#define BUG_TABLE_ENTRY(label, line, file, func) \ - ".long " #label ", " #line ", " #file ", " #func "\n" -#define TRAP_OP(ra, rb) "1: twnei " #ra ", " #rb "\n" -#define DATA_TYPE int +#define BUG_TABLE_ENTRY ".long" +#define BUG_TRAP_OP "twnei" #endif /* __powerpc64__ */ struct bug_entry { unsigned long bug_addr; - int line; + long line; const char *file; const char *function; }; @@ -43,29 +39,29 @@ struct bug_entry *find_bug(unsigned long bugaddr); #define BUG() do { \ __asm__ __volatile__( \ "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n\t" \ - BUG_TABLE_ENTRY(1b,%0,%1,%2) \ + ".section __bug_table,\"a\"\n" \ + "\t"BUG_TABLE_ENTRY" 1b,%0,%1,%2\n" \ ".previous" \ : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) #define BUG_ON(x) do { \ __asm__ __volatile__( \ - TRAP_OP(%0,0) \ - ".section __bug_table,\"a\"\n\t" \ - BUG_TABLE_ENTRY(1b,%1,%2,%3) \ + "1: "BUG_TRAP_OP" %0,0\n" \ + ".section __bug_table,\"a\"\n" \ + "\t"BUG_TABLE_ENTRY" 1b,%1,%2,%3\n" \ ".previous" \ - : : "r" ((DATA_TYPE)(x)), "i" (__LINE__), \ + : : "r" ((long)(x)), "i" (__LINE__), \ "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) #define WARN_ON(x) do { \ __asm__ __volatile__( \ - TRAP_OP(%0,0) \ - ".section __bug_table,\"a\"\n\t" \ - BUG_TABLE_ENTRY(1b,%1,%2,%3) \ + "1: "BUG_TRAP_OP" %0,0\n" \ + ".section __bug_table,\"a\"\n" \ + "\t"BUG_TABLE_ENTRY" 1b,%1,%2,%3\n" \ ".previous" \ - : : "r" ((DATA_TYPE)(x)), \ + : : "r" ((long)(x)), \ "i" (__LINE__ + BUG_WARNING_TRAP), \ "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index d22b10021b5d..d140577d0a05 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -178,18 +178,22 @@ typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, struct pt_regs *regs) { - int i; - int gprs = sizeof(struct pt_regs)/sizeof(ELF_GREG_TYPE); + int i, nregs; - if (gprs > ELF_NGREG) - gprs = ELF_NGREG; + memset((void *)elf_regs, 0, sizeof(elf_gregset_t)); - for (i=0; i < gprs; i++) - elf_regs[i] = (elf_greg_t)((ELF_GREG_TYPE *)regs)[i]; - - memset((char *)(elf_regs) + sizeof(struct pt_regs), 0, \ - sizeof(elf_gregset_t) - sizeof(struct pt_regs)); + /* Our registers are always unsigned longs, whether we're a 32 bit + * process or 64 bit, on either a 64 bit or 32 bit kernel. + * Don't use ELF_GREG_TYPE here. */ + nregs = sizeof(struct pt_regs) / sizeof(unsigned long); + if (nregs > ELF_NGREG) + nregs = ELF_NGREG; + for (i = 0; i < nregs; i++) { + /* This will correctly truncate 64 bit registers to 32 bits + * for a 32 bit process on a 64 bit kernel. */ + elf_regs[i] = (elf_greg_t)((ELF_GREG_TYPE *)regs)[i]; + } } #define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); diff --git a/include/asm-ppc64/futex.h b/include/asm-powerpc/futex.h index 266b460de44e..37c94e52ab6d 100644 --- a/include/asm-ppc64/futex.h +++ b/include/asm-powerpc/futex.h @@ -1,5 +1,5 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_POWERPC_FUTEX_H +#define _ASM_POWERPC_FUTEX_H #ifdef __KERNEL__ @@ -7,28 +7,29 @@ #include <asm/errno.h> #include <asm/synch.h> #include <asm/uaccess.h> +#include <asm/ppc_asm.h> #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ - __asm__ __volatile (SYNC_ON_SMP \ -"1: lwarx %0,0,%2\n" \ - insn \ -"2: stwcx. %1,0,%2\n\ - bne- 1b\n\ - li %1,0\n\ -3: .section .fixup,\"ax\"\n\ -4: li %1,%3\n\ - b 3b\n\ - .previous\n\ - .section __ex_table,\"a\"\n\ - .align 3\n\ - .llong 1b,4b,2b,4b\n\ - .previous" \ - : "=&r" (oldval), "=&r" (ret) \ - : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ + __asm__ __volatile ( \ + SYNC_ON_SMP \ +"1: lwarx %0,0,%2\n" \ + insn \ +"2: stwcx. %1,0,%2\n" \ + "bne- 1b\n" \ + "li %1,0\n" \ +"3: .section .fixup,\"ax\"\n" \ +"4: li %1,%3\n" \ + "b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + ".align 3\n" \ + DATAL " 1b,4b,2b,4b\n" \ + ".previous" \ + : "=&r" (oldval), "=&r" (ret) \ + : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ : "cr0", "memory") -static inline int -futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) { int op = (encoded_op >> 28) & 7; int cmp = (encoded_op >> 24) & 15; @@ -79,5 +80,5 @@ futex_atomic_op_inuser (int encoded_op, int __user *uaddr) return ret; } -#endif -#endif +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/include/asm-powerpc/ioctls.h b/include/asm-powerpc/ioctls.h index 5b94ff489b8b..279a6229584b 100644 --- a/include/asm-powerpc/ioctls.h +++ b/include/asm-powerpc/ioctls.h @@ -62,6 +62,9 @@ # define TIOCM_DSR 0x100 # define TIOCM_CD TIOCM_CAR # define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 #define TIOCGSOFTCAR 0x5419 #define TIOCSSOFTCAR 0x541A diff --git a/include/asm-powerpc/ipcbuf.h b/include/asm-powerpc/ipcbuf.h new file mode 100644 index 000000000000..2c3e1d94db1d --- /dev/null +++ b/include/asm-powerpc/ipcbuf.h @@ -0,0 +1,34 @@ +#ifndef _ASM_POWERPC_IPCBUF_H +#define _ASM_POWERPC_IPCBUF_H + +/* + * The ipc64_perm structure for the powerpc is identical to + * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the + * kernel. Note extra padding because this structure is passed back + * and forth between kernel and user space. Pad space is left for: + * - 1 32-bit value to fill up for 8-byte alignment + * - 2 miscellaneous 64-bit values + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned int seq; + unsigned int __pad1; + unsigned long long __unused1; + unsigned long long __unused2; +}; + +#endif /* _ASM_POWERPC_IPCBUF_H */ diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index c7c3f912a3c2..b3935ea28fff 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -73,7 +73,7 @@ extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq); #define IC_INVALID 0 #define IC_OPEN_PIC 1 #define IC_PPC_XIC 2 -#define IC_BPA_IIC 3 +#define IC_CELL_PIC 3 #define IC_ISERIES 4 extern u64 ppc64_interrupt_controller; diff --git a/include/asm-ppc64/iSeries/HvCall.h b/include/asm-powerpc/iseries/hv_call.h index c3f19475c0d9..e9f831c9a5e5 100644 --- a/include/asm-ppc64/iSeries/HvCall.h +++ b/include/asm-powerpc/iseries/hv_call.h @@ -20,11 +20,11 @@ * This file contains the "hypervisor call" interface which is used to * drive the hypervisor from the OS. */ -#ifndef _HVCALL_H -#define _HVCALL_H +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H +#define _ASM_POWERPC_ISERIES_HV_CALL_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/paca.h> /* Type of yield for HvCallBaseYieldProcessor */ @@ -110,4 +110,4 @@ static inline void HvCall_sendIPI(struct paca_struct *targetPaca) HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); } -#endif /* _HVCALL_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/include/asm-ppc64/iSeries/HvCallEvent.h b/include/asm-powerpc/iseries/hv_call_event.h index 5d9a327d0122..46763a30590a 100644 --- a/include/asm-ppc64/iSeries/HvCallEvent.h +++ b/include/asm-powerpc/iseries/hv_call_event.h @@ -20,11 +20,11 @@ * This file contains the "hypervisor call" interface which is used to * drive the hypervisor from the OS. */ -#ifndef _HVCALLEVENT_H -#define _HVCALLEVENT_H +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/abs_addr.h> struct HvLpEvent; @@ -250,4 +250,4 @@ static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, return HvCall4(HvCallEventDmaToSp, abs_addr, remote, length, dir); } -#endif /* _HVCALLEVENT_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/include/asm-ppc64/iSeries/HvCallSc.h b/include/asm-powerpc/iseries/hv_call_sc.h index a62cef3822f9..dec7e9d9ab78 100644 --- a/include/asm-ppc64/iSeries/HvCallSc.h +++ b/include/asm-powerpc/iseries/hv_call_sc.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _HVCALLSC_H -#define _HVCALLSC_H +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H +#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H #include <linux/types.h> @@ -48,4 +48,4 @@ extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); -#endif /* _HVCALLSC_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/include/asm-ppc64/iSeries/HvCallXm.h b/include/asm-powerpc/iseries/hv_call_xm.h index 8b9ba608daaf..ca9202cb01ed 100644 --- a/include/asm-ppc64/iSeries/HvCallXm.h +++ b/include/asm-powerpc/iseries/hv_call_xm.h @@ -2,11 +2,11 @@ * This file contains the "hypervisor call" interface which is used to * drive the hypervisor from SLIC. */ -#ifndef _HVCALLXM_H -#define _HVCALLXM_H +#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H +#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #define HvCallXmGetTceTableParms HvCallXm + 0 #define HvCallXmTestBus HvCallXm + 1 @@ -75,4 +75,4 @@ static inline u64 HvCallXm_loadTod(void) return HvCall0(HvCallXmLoadTod); } -#endif /* _HVCALLXM_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/include/asm-ppc64/iSeries/HvLpConfig.h b/include/asm-powerpc/iseries/hv_lp_config.h index f1cf1e70ca3c..bc00f036bca0 100644 --- a/include/asm-ppc64/iSeries/HvLpConfig.h +++ b/include/asm-powerpc/iseries/hv_lp_config.h @@ -16,17 +16,17 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _HVLPCONFIG_H -#define _HVLPCONFIG_H +#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H +#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H /* * This file contains the interface to the LPAR configuration data * to determine which resources should be allocated to each partition. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/it_lp_naca.h> enum { HvCallCfg_Cur = 0, @@ -135,4 +135,4 @@ static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) return HvCall1(HvCallCfgGetHostingLpIndex, lp); } -#endif /* _HVLPCONFIG_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/include/asm-ppc64/iSeries/HvLpEvent.h b/include/asm-powerpc/iseries/hv_lp_event.h index 865000de79b6..499ab1ad0185 100644 --- a/include/asm-ppc64/iSeries/HvLpEvent.h +++ b/include/asm-powerpc/iseries/hv_lp_event.h @@ -19,13 +19,13 @@ /* This file contains the class for HV events in the system. */ -#ifndef _HVLPEVENT_H -#define _HVLPEVENT_H +#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H +#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H #include <asm/types.h> #include <asm/ptrace.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvCallEvent.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_call_event.h> /* * HvLpEvent is the structure for Lp Event messages passed between @@ -139,4 +139,4 @@ extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); #define HvLpDma_Rc_InvalidAddress 4 #define HvLpDma_Rc_InvalidLength 5 -#endif /* _HVLPEVENT_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/include/asm-ppc64/iSeries/HvTypes.h b/include/asm-powerpc/iseries/hv_types.h index b1ef2b4cb3e3..c38f7e3d01dc 100644 --- a/include/asm-ppc64/iSeries/HvTypes.h +++ b/include/asm-powerpc/iseries/hv_types.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _HVTYPES_H -#define _HVTYPES_H +#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H +#define _ASM_POWERPC_ISERIES_HV_TYPES_H /* * General typedefs for the hypervisor. @@ -110,4 +110,4 @@ struct HvLpBufferList { u64 len; }; -#endif /* _HVTYPES_H */ +#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/include/asm-ppc64/iSeries/iSeries_io.h b/include/asm-powerpc/iseries/iseries_io.h index 9f79413342b3..56b2113ff0f5 100644 --- a/include/asm-ppc64/iSeries/iSeries_io.h +++ b/include/asm-powerpc/iseries/iseries_io.h @@ -1,5 +1,5 @@ -#ifndef _ISERIES_IO_H -#define _ISERIES_IO_H +#ifndef _ASM_POWERPC_ISERIES_ISERIES_IO_H +#define _ASM_POWERPC_ISERIES_ISERIES_IO_H #include <linux/config.h> @@ -46,4 +46,4 @@ extern void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *source, size_t n); #endif /* CONFIG_PPC_ISERIES */ -#endif /* _ISERIES_IO_H */ +#endif /* _ASM_POWERPC_ISERIES_ISERIES_IO_H */ diff --git a/include/asm-ppc64/iSeries/ItExtVpdPanel.h b/include/asm-powerpc/iseries/it_exp_vpd_panel.h index 4c546a8802b4..66a17a230c52 100644 --- a/include/asm-ppc64/iSeries/ItExtVpdPanel.h +++ b/include/asm-powerpc/iseries/it_exp_vpd_panel.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ITEXTVPDPANEL_H -#define _ITEXTVPDPANEL_H +#ifndef _ASM_POWERPC_ISERIES_IT_EXT_VPD_PANEL_H +#define _ASM_POWERPC_ISERIES_IT_EXT_VPD_PANEL_H /* * This struct maps the panel information @@ -49,4 +49,4 @@ struct ItExtVpdPanel { extern struct ItExtVpdPanel xItExtVpdPanel; -#endif /* _ITEXTVPDPANEL_H */ +#endif /* _ASM_POWERPC_ISERIES_IT_EXT_VPD_PANEL_H */ diff --git a/include/asm-ppc64/iSeries/ItLpNaca.h b/include/asm-powerpc/iseries/it_lp_naca.h index 225d0176779d..c3ef1de45d82 100644 --- a/include/asm-ppc64/iSeries/ItLpNaca.h +++ b/include/asm-powerpc/iseries/it_lp_naca.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ITLPNACA_H -#define _ITLPNACA_H +#ifndef _ASM_POWERPC_ISERIES_IT_LP_NACA_H +#define _ASM_POWERPC_ISERIES_IT_LP_NACA_H #include <linux/types.h> @@ -77,4 +77,4 @@ struct ItLpNaca { extern struct ItLpNaca itLpNaca; -#endif /* _ITLPNACA_H */ +#endif /* _ASM_POWERPC_ISERIES_IT_LP_NACA_H */ diff --git a/include/asm-ppc64/iSeries/ItLpQueue.h b/include/asm-powerpc/iseries/it_lp_queue.h index 69b26ad74135..a60d03afbf95 100644 --- a/include/asm-ppc64/iSeries/ItLpQueue.h +++ b/include/asm-powerpc/iseries/it_lp_queue.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ITLPQUEUE_H -#define _ITLPQUEUE_H +#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H +#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H /* * This control block defines the simple LP queue structure that is @@ -78,4 +78,4 @@ extern int hvlpevent_is_pending(void); extern void process_hvlpevents(struct pt_regs *); extern void setup_hvlpevent_queue(void); -#endif /* _ITLPQUEUE_H */ +#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/include/asm-ppc64/iSeries/ItLpRegSave.h b/include/asm-powerpc/iseries/it_lp_reg_save.h index 1b3087e76205..288044b702de 100644 --- a/include/asm-ppc64/iSeries/ItLpRegSave.h +++ b/include/asm-powerpc/iseries/it_lp_reg_save.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ITLPREGSAVE_H -#define _ITLPREGSAVE_H +#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H +#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H /* * This control block contains the data that is shared between PLIC diff --git a/include/asm-ppc64/iSeries/LparMap.h b/include/asm-powerpc/iseries/lpar_map.h index a6840b186d03..84fc321615bf 100644 --- a/include/asm-ppc64/iSeries/LparMap.h +++ b/include/asm-powerpc/iseries/lpar_map.h @@ -16,8 +16,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _LPARMAP_H -#define _LPARMAP_H +#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H +#define _ASM_POWERPC_ISERIES_LPAR_MAP_H #ifndef __ASSEMBLY__ @@ -80,4 +80,4 @@ extern const struct LparMap xLparMap; /* the fixed address where the LparMap exists */ #define LPARMAP_PHYS 0x7000 -#endif /* _LPARMAP_H */ +#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/include/asm-ppc64/iSeries/mf.h b/include/asm-powerpc/iseries/mf.h index 7e6a0d936999..e7bd57a03fb1 100644 --- a/include/asm-ppc64/iSeries/mf.h +++ b/include/asm-powerpc/iseries/mf.h @@ -23,13 +23,13 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef _ASM_PPC64_ISERIES_MF_H -#define _ASM_PPC64_ISERIES_MF_H +#ifndef _ASM_POWERPC_ISERIES_MF_H +#define _ASM_POWERPC_ISERIES_MF_H #include <linux/types.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvCallEvent.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_call_event.h> struct rtc_time; @@ -54,4 +54,4 @@ extern int mf_get_rtc(struct rtc_time *tm); extern int mf_get_boot_rtc(struct rtc_time *tm); extern int mf_set_rtc(struct rtc_time *tm); -#endif /* _ASM_PPC64_ISERIES_MF_H */ +#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/include/asm-ppc64/iSeries/vio.h b/include/asm-powerpc/iseries/vio.h index 6c05e6257f53..7e3a469420dd 100644 --- a/include/asm-ppc64/iSeries/vio.h +++ b/include/asm-powerpc/iseries/vio.h @@ -38,11 +38,11 @@ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#ifndef _ISERIES_VIO_H -#define _ISERIES_VIO_H +#ifndef _ASM_POWERPC_ISERIES_VIO_H +#define _ASM_POWERPC_ISERIES_VIO_H -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> /* * iSeries virtual I/O events use the subtype field in @@ -127,4 +127,4 @@ struct device; extern struct device *iSeries_vio_dev; -#endif /* _ISERIES_VIO_H */ +#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h new file mode 100644 index 000000000000..062ab9ba68eb --- /dev/null +++ b/include/asm-powerpc/kexec.h @@ -0,0 +1,49 @@ +#ifndef _ASM_POWERPC_KEXEC_H +#define _ASM_POWERPC_KEXEC_H + +/* + * Maximum page that is mapped directly into kernel memory. + * XXX: Since we copy virt we can use any page we allocate + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) + +/* + * Maximum address we can reach in physical address mode. + * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. + */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) + +/* Maximum address we can use for the control code buffer */ +#ifdef __powerpc64__ +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) +#else +/* TASK_SIZE, probably left over from use_mm ?? */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#endif + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#ifdef __powerpc64__ +#define KEXEC_ARCH KEXEC_ARCH_PPC64 +#else +#define KEXEC_ARCH KEXEC_ARCH_PPC +#endif + +#ifndef __ASSEMBLY__ + +#define MAX_NOTE_BYTES 1024 +typedef u32 note_buf_t[MAX_NOTE_BYTES / sizeof(u32)]; + +extern note_buf_t crash_notes[]; + +#ifdef __powerpc64__ +extern void kexec_smp_wait(void); /* get and clear naca physid, wait for + master to copy new code to 0 */ +#else +struct kimage; +extern void machine_kexec_simple(struct kimage *image); +#endif + +#endif /* ! __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 451b345cfc78..629ca964b974 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -80,6 +80,7 @@ struct machdep_calls { void (*iommu_dev_setup)(struct pci_dev *dev); void (*iommu_bus_setup)(struct pci_bus *bus); void (*irq_bus_setup)(struct pci_bus *bus); + int (*set_dabr)(unsigned long dabr); #endif int (*probe)(int platform); diff --git a/include/asm-powerpc/numnodes.h b/include/asm-powerpc/numnodes.h new file mode 100644 index 000000000000..795533aca095 --- /dev/null +++ b/include/asm-powerpc/numnodes.h @@ -0,0 +1,7 @@ +#ifndef _ASM_POWERPC_MAX_NUMNODES_H +#define _ASM_POWERPC_MAX_NUMNODES_H + +/* Max 16 Nodes */ +#define NODES_SHIFT 4 + +#endif /* _ASM_POWERPC_MAX_NUMNODES_H */ diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index f99f2af82ca5..c534ca41224b 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -506,6 +506,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #else #define __ASM_CONST(x) x##UL #define ASM_CONST(x) __ASM_CONST(x) + +#ifdef CONFIG_PPC64 +#define DATAL ".llong" +#else +#define DATAL ".long" +#endif + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index eee954a001fd..1dc4bf7b52b3 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -70,7 +70,7 @@ extern unsigned char ucBoardRevMaj, ucBoardRevMin; #define PLATFORM_LPAR 0x0001 #define PLATFORM_POWERMAC 0x0400 #define PLATFORM_MAPLE 0x0500 -#define PLATFORM_BPA 0x1000 +#define PLATFORM_CELL 0x1000 /* Compatibility with drivers coming from PPC32 world */ #define _machine (systemcfg->platform) diff --git a/include/asm-ppc64/ptrace.h b/include/asm-powerpc/ptrace.h index 3a55377f1fd3..1f7ecdb0b6ce 100644 --- a/include/asm-ppc64/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -1,5 +1,5 @@ -#ifndef _PPC64_PTRACE_H -#define _PPC64_PTRACE_H +#ifndef _ASM_POWERPC_PTRACE_H +#define _ASM_POWERPC_PTRACE_H /* * Copyright (C) 2001 PPC64 Team, IBM Corp @@ -16,7 +16,7 @@ * that the overall structure is a multiple of 16 bytes in length. * * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/ppc64/kernel/ptrace.c. + * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -30,70 +30,96 @@ struct pt_regs { unsigned long gpr[32]; unsigned long nip; unsigned long msr; - unsigned long orig_gpr3; /* Used for restarting system calls */ + unsigned long orig_gpr3; /* Used for restarting system calls */ unsigned long ctr; unsigned long link; unsigned long xer; unsigned long ccr; - unsigned long softe; /* Soft enabled/disabled */ - unsigned long trap; /* Reason for being here */ - unsigned long dar; /* Fault registers */ - unsigned long dsisr; - unsigned long result; /* Result of a system call */ +#ifdef __powerpc64__ + unsigned long softe; /* Soft enabled/disabled */ +#else + unsigned long mq; /* 601 only (not used at present) */ + /* Used on APUS to hold IPL value. */ +#endif + unsigned long trap; /* Reason for being here */ + /* N.B. for critical exceptions on 4xx, the dar and dsisr + fields are overloaded to hold srr0 and srr1. */ + unsigned long dar; /* Fault registers */ + unsigned long dsisr; /* on 4xx/Book-E used for ESR */ + unsigned long result; /* Result of a system call */ }; -struct pt_regs32 { - unsigned int gpr[32]; - unsigned int nip; - unsigned int msr; - unsigned int orig_gpr3; /* Used for restarting system calls */ - unsigned int ctr; - unsigned int link; - unsigned int xer; - unsigned int ccr; - unsigned int mq; /* 601 only (not used at present) */ - unsigned int trap; /* Reason for being here */ - unsigned int dar; /* Fault registers */ - unsigned int dsisr; - unsigned int result; /* Result of a system call */ -}; +#endif /* __ASSEMBLY__ */ #ifdef __KERNEL__ -#define instruction_pointer(regs) ((regs)->nip) +#ifdef __powerpc64__ + +#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ + +/* Size of dummy stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 128 +#define __SIGNAL_FRAMESIZE32 64 + +#else /* __powerpc64__ */ + +#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ + +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 64 + +#endif /* __powerpc64__ */ +#ifndef __ASSEMBLY__ + +#define instruction_pointer(regs) ((regs)->nip) #ifdef CONFIG_SMP extern unsigned long profile_pc(struct pt_regs *regs); #else #define profile_pc(regs) instruction_pointer(regs) #endif +#ifdef __powerpc64__ #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) +#else +#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) +#endif #define force_successful_syscall_return() \ - (current_thread_info()->syscall_noerror = 1) + do { \ + current_thread_info()->syscall_noerror = 1; \ + } while(0) /* * We use the least-significant bit of the trap field to indicate * whether we have saved the full set of registers, or only a * partial set. A 1 there means the partial set. + * On 4xx we use the next bit to indicate whether the exception + * is a critical exception (1 means it is). */ #define FULL_REGS(regs) (((regs)->trap & 1) == 0) +#ifndef __powerpc64__ +#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0) +#endif /* ! __powerpc64__ */ #define TRAP(regs) ((regs)->trap & ~0xF) +#ifdef __powerpc64__ #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) - -#endif /* __KERNEL__ */ +#else +#define CHECK_FULL_REGS(regs) \ +do { \ + if ((regs)->trap & 1) \ + printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ +} while (0) +#endif /* __powerpc64__ */ #endif /* __ASSEMBLY__ */ -#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ - -/* Size of dummy stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 128 -#define __SIGNAL_FRAMESIZE32 64 +#endif /* __KERNEL__ */ /* * Offsets used by 'ptrace' system call interface. + * These can't be changed without breaking binary compatibility + * with MkLinux, etc. */ #define PT_R0 0 #define PT_R1 1 @@ -137,18 +163,25 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define PT_LNK 36 #define PT_XER 37 #define PT_CCR 38 +#ifndef __powerpc64__ +#define PT_MQ 39 +#else #define PT_SOFTE 39 #define PT_TRAP 40 #define PT_DAR 41 #define PT_DSISR 42 #define PT_RESULT 43 +#endif -#define PT_FPR0 48 +#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ + +#ifndef __powerpc64__ + +#define PT_FPR31 (PT_FPR0 + 2*31) +#define PT_FPSCR (PT_FPR0 + 2*32 + 1) + +#else /* __powerpc64__ */ -/* - * Kernel and userspace will both use this PT_FPSCR value. 32-bit apps will - * have visibility to the asm-ppc/ptrace.h header instead of this one. - */ #define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ #ifdef __KERNEL__ @@ -165,29 +198,29 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define PT_VRSAVE_32 (PT_VR0 + 33*4) #endif +#endif /* __powerpc64__ */ + /* - * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. - * The transfer totals 34 quadword. Quadwords 0-31 contain the - * corresponding vector registers. Quadword 32 contains the vscr as the - * last word (offset 12) within that quadword. Quadword 33 contains the + * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. + * The transfer totals 34 quadword. Quadwords 0-31 contain the + * corresponding vector registers. Quadword 32 contains the vscr as the + * last word (offset 12) within that quadword. Quadword 33 contains the * vrsave as the first word (offset 0) within the quadword. * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch + * This definition of the VMX state is compatible with the current PPC32 + * ptrace interface. This allows signal handling and ptrace to use the same + * structures. This also simplifies the implementation of a bi-arch * (combined (32- and 64-bit) gdb. */ #define PTRACE_GETVRREGS 18 #define PTRACE_SETVRREGS 19 -/* - * While we dont have 64bit book E processors, we need to reserve the - * relevant ptrace calls for 32bit compatibility. - */ -#if 0 -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 -#endif +#ifndef __powerpc64__ +/* Get/set all the upper 32-bits of the SPE registers, accumulator, and + * spefscr, in one go */ +#define PTRACE_GETEVRREGS 20 +#define PTRACE_SETEVRREGS 21 +#endif /* __powerpc64__ */ /* * Get or set a debug register. The first 16 are DABR registers and the @@ -196,6 +229,7 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define PTRACE_GET_DEBUGREG 25 #define PTRACE_SET_DEBUGREG 26 +#ifdef __powerpc64__ /* Additional PTRACE requests implemented on PowerPC. */ #define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ #define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ @@ -209,5 +243,6 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define PPC_PTRACE_POKEDATA_3264 0x92 #define PPC_PTRACE_PEEKUSR_3264 0x91 #define PPC_PTRACE_POKEUSR_3264 0x90 +#endif /* __powerpc64__ */ -#endif /* _PPC64_PTRACE_H */ +#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 2c050332471d..d1bb611ea626 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -149,28 +149,11 @@ struct rtas_error_log { unsigned char buffer[1]; }; -struct flash_block { - char *data; - unsigned long length; -}; - -/* This struct is very similar but not identical to - * that needed by the rtas flash update. - * All we need to do for rtas is rewrite num_blocks - * into a version/length and translate the pointers - * to absolute. +/* + * This can be set by the rtas_flash module so that it can get called + * as the absolutely last thing before the kernel terminates. */ -#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) -struct flash_block_list { - unsigned long num_blocks; - struct flash_block_list *next; - struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; -}; -struct flash_block_list_header { /* just the header of flash_block_list */ - unsigned long num_blocks; - struct flash_block_list *next; -}; -extern struct flash_block_list_header rtas_firmware_flash_list; +extern void (*rtas_flash_term_hook)(int); extern struct rtas_t rtas; diff --git a/include/asm-ppc64/sigcontext.h b/include/asm-powerpc/sigcontext.h index 6f8aee768c5e..165d630e1cf3 100644 --- a/include/asm-ppc64/sigcontext.h +++ b/include/asm-powerpc/sigcontext.h @@ -1,5 +1,5 @@ -#ifndef _ASM_PPC64_SIGCONTEXT_H -#define _ASM_PPC64_SIGCONTEXT_H +#ifndef _ASM_POWERPC_SIGCONTEXT_H +#define _ASM_POWERPC_SIGCONTEXT_H /* * This program is free software; you can redistribute it and/or @@ -9,39 +9,44 @@ */ #include <linux/compiler.h> #include <asm/ptrace.h> +#ifdef __powerpc64__ #include <asm/elf.h> - +#endif struct sigcontext { unsigned long _unused[4]; int signal; +#ifdef __powerpc64__ int _pad0; +#endif unsigned long handler; unsigned long oldmask; struct pt_regs __user *regs; +#ifdef __powerpc64__ elf_gregset_t gp_regs; elf_fpregset_t fp_regs; /* - * To maintain compatibility with current implementations the sigcontext is - * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) - * followed by an unstructured (vmx_reserve) field of 69 doublewords. This - * allows the array of vector registers to be quadword aligned independent of - * the alignment of the containing sigcontext or ucontext. It is the - * responsibility of the code setting the sigcontext to set this pointer to - * either NULL (if this processor does not support the VMX feature) or the + * To maintain compatibility with current implementations the sigcontext is + * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) + * followed by an unstructured (vmx_reserve) field of 69 doublewords. This + * allows the array of vector registers to be quadword aligned independent of + * the alignment of the containing sigcontext or ucontext. It is the + * responsibility of the code setting the sigcontext to set this pointer to + * either NULL (if this processor does not support the VMX feature) or the * address of the first quadword within the allocated (vmx_reserve) area. * - * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with - * an array of 34 quadword entries (elf_vrregset_t). The entries with - * indexes 0-31 contain the corresponding vector registers. The entry with - * index 32 contains the vscr as the last word (offset 12) within the - * quadword. This allows the vscr to be stored as either a quadword (since - * it must be copied via a vector register to/from storage) or as a word. - * The entry with index 33 contains the vrsave as the first word (offset 0) + * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with + * an array of 34 quadword entries (elf_vrregset_t). The entries with + * indexes 0-31 contain the corresponding vector registers. The entry with + * index 32 contains the vscr as the last word (offset 12) within the + * quadword. This allows the vscr to be stored as either a quadword (since + * it must be copied via a vector register to/from storage) or as a word. + * The entry with index 33 contains the vrsave as the first word (offset 0) * within the quadword. */ elf_vrreg_t __user *v_regs; long vmx_reserve[ELF_NVRREG+ELF_NVRREG+1]; +#endif }; -#endif /* _ASM_PPC64_SIGCONTEXT_H */ +#endif /* _ASM_POWERPC_SIGCONTEXT_H */ diff --git a/include/asm-ppc64/smp.h b/include/asm-powerpc/smp.h index c5e9052e7967..8bcdd0faefea 100644 --- a/include/asm-ppc64/smp.h +++ b/include/asm-powerpc/smp.h @@ -1,5 +1,5 @@ /* - * smp.h: PPC64 specific SMP code. + * smp.h: PowerPC-specific SMP code. * * Original was a copy of sparc smp.h. Now heavily modified * for PPC. @@ -13,9 +13,9 @@ * 2 of the License, or (at your option) any later version. */ +#ifndef _ASM_POWERPC_SMP_H +#define _ASM_POWERPC_SMP_H #ifdef __KERNEL__ -#ifndef _PPC64_SMP_H -#define _PPC64_SMP_H #include <linux/config.h> #include <linux/threads.h> @@ -24,7 +24,9 @@ #ifndef __ASSEMBLY__ +#ifdef CONFIG_PPC64 #include <asm/paca.h> +#endif extern int boot_cpuid; extern int boot_cpuid_phys; @@ -45,8 +47,19 @@ void generic_cpu_die(unsigned int cpu); void generic_mach_cpu_die(void); #endif +#ifdef CONFIG_PPC64 #define raw_smp_processor_id() (get_paca()->paca_index) #define hard_smp_processor_id() (get_paca()->hw_cpu_id) +#else +/* 32-bit */ +extern int smp_hw_index[]; + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) +#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) +#define set_hard_smp_processor_id(cpu, phys)\ + (smp_hw_index[(cpu)] = (phys)) +#endif extern cpumask_t cpu_sibling_map[NR_CPUS]; @@ -64,14 +77,30 @@ extern cpumask_t cpu_sibling_map[NR_CPUS]; void smp_init_iSeries(void); void smp_init_pSeries(void); +void smp_init_cell(void); +void smp_setup_cpu_maps(void); extern int __cpu_disable(void); extern void __cpu_die(unsigned int cpu); + +#else +/* for UP */ +#define smp_setup_cpu_maps() +#define smp_release_cpus() + #endif /* CONFIG_SMP */ +#ifdef CONFIG_PPC64 #define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) #define set_hard_smp_processor_id(CPU, VAL) \ do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) +#else +/* 32-bit */ +#ifndef CONFIG_SMP +#define get_hard_smp_processor_id(cpu) boot_cpuid_phys +#define set_hard_smp_processor_id(cpu, phys) +#endif +#endif extern int smt_enabled_at_boot; @@ -84,15 +113,7 @@ extern void smp_generic_take_timebase(void); extern struct smp_ops_t *smp_ops; -#ifdef CONFIG_PPC_PSERIES -void vpa_init(int cpu); -#else -static inline void vpa_init(int cpu) -{ -} -#endif /* CONFIG_PPC_PSERIES */ - #endif /* __ASSEMBLY__ */ -#endif /* !(_PPC64_SMP_H) */ #endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/include/asm-ppc64/sparsemem.h b/include/asm-powerpc/sparsemem.h index c5bd47e57f17..1c95ab99deb3 100644 --- a/include/asm-ppc64/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -1,5 +1,5 @@ -#ifndef _ASM_PPC64_SPARSEMEM_H -#define _ASM_PPC64_SPARSEMEM_H 1 +#ifndef _ASM_POWERPC_SPARSEMEM_H +#define _ASM_POWERPC_SPARSEMEM_H 1 #ifdef CONFIG_SPARSEMEM /* @@ -13,4 +13,4 @@ #endif /* CONFIG_SPARSEMEM */ -#endif /* _ASM_PPC64_SPARSEMEM_H */ +#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/include/asm-powerpc/stat.h b/include/asm-powerpc/stat.h new file mode 100644 index 000000000000..e4edc510b530 --- /dev/null +++ b/include/asm-powerpc/stat.h @@ -0,0 +1,81 @@ +#ifndef _ASM_POWERPC_STAT_H +#define _ASM_POWERPC_STAT_H +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/types.h> + +#define STAT_HAVE_NSEC 1 + +#ifndef __powerpc64__ +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; +#endif /* !__powerpc64__ */ + +struct stat { + unsigned long st_dev; + ino_t st_ino; +#ifdef __powerpc64__ + nlink_t st_nlink; + mode_t st_mode; +#else + mode_t st_mode; + nlink_t st_nlink; +#endif + uid_t st_uid; + gid_t st_gid; + unsigned long st_rdev; + off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +#ifdef __powerpc64__ + unsigned long __unused6; +#endif +}; + +/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ +struct stat64 { + unsigned long long st_dev; /* Device. */ + unsigned long long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + unsigned short __pad2; + long long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + long long st_blocks; /* Number 512-byte blocks allocated. */ + int st_atime; /* Time of last access. */ + unsigned int st_atime_nsec; + int st_mtime; /* Time of last modification. */ + unsigned int st_mtime_nsec; + int st_ctime; /* Time of last status change. */ + unsigned int st_ctime_nsec; + unsigned int __unused4; + unsigned int __unused5; +}; + +#endif /* _ASM_POWERPC_STAT_H */ diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 5b2ecbc47907..b5da0b851e02 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -359,5 +359,53 @@ extern void reloc_got2(unsigned long); #define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) +static inline void create_instruction(unsigned long addr, unsigned int instr) +{ + unsigned int *p; + p = (unsigned int *)addr; + *p = instr; + asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); +} + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +static inline void create_branch(unsigned long addr, + unsigned long target, int flags) +{ + unsigned int instruction; + + if (! (flags & BRANCH_ABSOLUTE)) + target = target - addr; + + /* Mask out the flags and target, so they don't step on each other. */ + instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); + + create_instruction(addr, instruction); +} + +static inline void create_function_call(unsigned long addr, void * func) +{ + unsigned long func_addr; + +#ifdef CONFIG_PPC64 + /* + * On PPC64 the function pointer actually points to the function's + * descriptor. The first entry in the descriptor is the address + * of the function text. + */ + func_addr = *(unsigned long *)func; +#else + func_addr = (unsigned long)func; +#endif + create_branch(addr, func_addr, BRANCH_SET_LINK); +} + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/include/asm-powerpc/termios.h b/include/asm-powerpc/termios.h index c5b8e5358f83..7f80a019b6a0 100644 --- a/include/asm-powerpc/termios.h +++ b/include/asm-powerpc/termios.h @@ -94,142 +94,9 @@ struct termio { #define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" #endif -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD - -#define TIOCGETP _IOR('t', 8, struct sgttyb) -#define TIOCSETP _IOW('t', 9, struct sgttyb) -#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ - -#define TIOCSETC _IOW('t', 17, struct tchars) -#define TIOCGETC _IOR('t', 18, struct tchars) -#define TCGETS _IOR('t', 19, struct termios) -#define TCSETS _IOW('t', 20, struct termios) -#define TCSETSW _IOW('t', 21, struct termios) -#define TCSETSF _IOW('t', 22, struct termios) - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCGLTC _IOR('t', 116, struct ltchars) -#define TIOCSLTC _IOW('t', 117, struct ltchars) -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E - -#define TIOCSTI 0x5412 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 - -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ - -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - #ifdef __KERNEL__ -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - (termios)->x = (0xffff0000 & (termios)->x) | __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#include <asm-generic/termios.h> #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index 410e795f7d43..d9b86a17271b 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -21,7 +21,7 @@ #include <asm/processor.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #endif /* time.c */ diff --git a/include/asm-ppc/tlb.h b/include/asm-powerpc/tlb.h index 2c142c5d8584..56659f121779 100644 --- a/include/asm-ppc/tlb.h +++ b/include/asm-powerpc/tlb.h @@ -1,6 +1,7 @@ /* - * TLB shootdown specifics for PPC + * TLB shootdown specifics for powerpc * + * Copyright (C) 2002 Anton Blanchard, IBM Corp. * Copyright (C) 2002 Paul Mackerras, IBM Corp. * * This program is free software; you can redistribute it and/or @@ -8,29 +9,53 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#ifndef _PPC_TLB_H -#define _PPC_TLB_H +#ifndef _ASM_POWERPC_TLB_H +#define _ASM_POWERPC_TLB_H #include <linux/config.h> +#ifndef __powerpc64__ #include <asm/pgtable.h> +#endif #include <asm/pgalloc.h> #include <asm/tlbflush.h> +#ifndef __powerpc64__ #include <asm/page.h> #include <asm/mmu.h> - -#ifdef CONFIG_PPC_STD_MMU -/* Classic PPC with hash-table based MMU... */ +#endif struct mmu_gather; + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) + +#if !defined(CONFIG_PPC_STD_MMU) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#elif defined(__powerpc64__) + +extern void pte_free_finish(void); + +static inline void tlb_flush(struct mmu_gather *tlb) +{ + flush_tlb_pending(); + pte_free_finish(); +} + +#else + extern void tlb_flush(struct mmu_gather *tlb); +#endif + /* Get the generic bits... */ #include <asm-generic/tlb.h> -/* Nothing needed here in fact... */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) +#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) +#else extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long address); @@ -41,17 +66,5 @@ static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, flush_hash_entry(tlb->mm, ptep, address); } -#else -/* Embedded PPC with software-loaded TLB, very simple... */ - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -/* Get the generic bits... */ -#include <asm-generic/tlb.h> - -#endif /* CONFIG_PPC_STD_MMU */ - -#endif /* __PPC_TLB_H */ +#endif +#endif /* __ASM_POWERPC_TLB_H */ diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h new file mode 100644 index 000000000000..ca3655672bbc --- /dev/null +++ b/include/asm-powerpc/tlbflush.h @@ -0,0 +1,146 @@ +#ifndef _ASM_POWERPC_TLBFLUSH_H +#define _ASM_POWERPC_TLBFLUSH_H +/* + * TLB flushing: + * + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifdef __KERNEL__ + +#include <linux/config.h> + +struct mm_struct; + +#ifdef CONFIG_PPC64 + +#include <linux/percpu.h> +#include <asm/page.h> + +#define PPC64_TLB_BATCH_NR 192 + +struct ppc64_tlb_batch { + unsigned long index; + struct mm_struct *mm; + pte_t pte[PPC64_TLB_BATCH_NR]; + unsigned long vaddr[PPC64_TLB_BATCH_NR]; + unsigned int large; +}; +DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); + +extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); + +static inline void flush_tlb_pending(void) +{ + struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch); + + if (batch->index) + __flush_tlb_pending(batch); + put_cpu_var(ppc64_tlb_batch); +} + +extern void flush_hash_page(unsigned long va, pte_t pte, int local); +void flush_hash_range(unsigned long number, int local); + +#else /* CONFIG_PPC64 */ + +#include <linux/mm.h> + +extern void _tlbie(unsigned long address); +extern void _tlbia(void); + +/* + * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & + * flush_tlb_kernel_range are best implemented as tlbia vs + * specific tlbie's + */ + +#if (defined(CONFIG_4xx) && !defined(CONFIG_44x)) || defined(CONFIG_8xx) +#define flush_tlb_pending() asm volatile ("tlbia; sync" : : : "memory") +#elif defined(CONFIG_4xx) || defined(CONFIG_FSL_BOOKE) +#define flush_tlb_pending() _tlbia() +#endif + +/* + * This gets called at the end of handling a page fault, when + * the kernel has put a new PTE into the page table for the process. + * We use it to ensure coherency between the i-cache and d-cache + * for the page which has just been mapped in. + * On machines which use an MMU hash table, we use this to put a + * corresponding HPTE into the hash table ahead of time, instead of + * waiting for the inevitable extra hash-table miss exception. + */ +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +#endif /* CONFIG_PPC64 */ + +#if defined(CONFIG_PPC64) || defined(CONFIG_4xx) || \ + defined(CONFIG_FSL_BOOKE) || defined(CONFIG_8xx) + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + flush_tlb_pending(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +#ifdef CONFIG_PPC64 + flush_tlb_pending(); +#else + _tlbie(vmaddr); +#endif +} + +static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +#ifndef CONFIG_PPC64 + _tlbie(vmaddr); +#endif +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + flush_tlb_pending(); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_pending(); +} + +#else /* 6xx, 7xx, 7xxx cpus */ + +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#endif + +/* + * This is called in munmap when we have freed up some page-table + * pages. We don't need to do anything here, there's nothing special + * about our page-table pages. -- paulus + */ +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ +} + +#endif /*__KERNEL__ */ +#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h new file mode 100644 index 000000000000..33af730f0d19 --- /dev/null +++ b/include/asm-powerpc/uaccess.h @@ -0,0 +1,468 @@ +#ifndef _ARCH_POWERPC_UACCESS_H +#define _ARCH_POWERPC_UACCESS_H + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include <linux/sched.h> +#include <linux/errno.h> +#include <asm/processor.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * The fs/ds values are now the highest legal address in the "segment". + * This simplifies the checking in the routines below. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(~0UL) +#ifdef __powerpc64__ +/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ +#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) +#else +#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +#endif + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.fs) +#define set_fs(val) (current->thread.fs = (val)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + +#ifdef __powerpc64__ +/* + * This check is sufficient because there is a large enough + * gap between user addresses and the kernel addresses + */ +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && ((size) <= (segment).seg)) + +#else + +#define __access_ok(addr, size, segment) \ + (((addr) <= (segment).seg) && \ + (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) + +#endif + +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((__force unsigned long)(addr), (size), get_fs())) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn; + unsigned long fixup; +}; + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on the + * PowerPC, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + * The "user64" versions of the user access functions are versions that + * allow access of 64-bit data. The "get_user" functions do not + * properly handle 64-bit data because the value gets down cast to a long. + * The "put_user" functions already handle 64-bit data properly but we add + * "user64" versions for completeness + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) +#define put_user(x, ptr) \ + __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user(x, ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) +#ifndef __powerpc64__ +#define __get_user64(x, ptr) \ + __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) +#define __put_user64(x, ptr) __put_user(x, ptr) +#endif + +#define __get_user_unaligned __get_user +#define __put_user_unaligned __put_user + +extern long __put_user_bad(void); + +#ifdef __powerpc64__ +#define __EX_TABLE_ALIGN "3" +#define __EX_TABLE_TYPE "llong" +#else +#define __EX_TABLE_ALIGN "2" +#define __EX_TABLE_TYPE "long" +#endif + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + */ +#define __put_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: " op " %1,0(%2) # put_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ."__EX_TABLE_TYPE" 1b,3b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __put_user_asm2(x, ptr, retval) \ + __put_user_asm(x, ptr, retval, "std") +#else /* __powerpc64__ */ +#define __put_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: stw %1,0(%2)\n" \ + "2: stw %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,4b\n" \ + " ." __EX_TABLE_TYPE " 2b,4b\n" \ + ".previous" \ + : "=r" (err) \ + : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __put_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ + case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ + case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ + case 8: __put_user_asm2(x, ptr, retval); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + long __pu_err; \ + might_sleep(); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), (ptr), (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2) # get_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " li %1,0\n" \ + " b 2b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align "__EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,3b\n" \ + ".previous" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __get_user_asm2(x, addr, err) \ + __get_user_asm(x, addr, err, "ld") +#else /* __powerpc64__ */ +#define __get_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: lwz %1,0(%2)\n" \ + "2: lwz %1+1,4(%2)\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " li %1,0\n" \ + " li %1+1,0\n" \ + " b 3b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align " __EX_TABLE_ALIGN "\n" \ + " ." __EX_TABLE_TYPE " 1b,4b\n" \ + " ." __EX_TABLE_TYPE " 2b,4b\n" \ + ".previous" \ + : "=r" (err), "=&r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __get_user_size(x, ptr, size, retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + if (size > sizeof(x)) \ + (x) = __get_user_bad(); \ + switch (size) { \ + case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ + case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ + case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ + case 8: __get_user_asm2(x, ptr, retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + __chk_user_ptr(ptr); \ + might_sleep(); \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#ifndef __powerpc64__ +#define __get_user64_nocheck(x, ptr, size) \ +({ \ + long __gu_err; \ + long long __gu_val; \ + __chk_user_ptr(ptr); \ + might_sleep(); \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) +#endif /* __powerpc64__ */ + +#define __get_user_check(x, ptr, size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + might_sleep(); \ + if (access_ok(VERIFY_READ, __gu_addr, (size))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +/* more complex routines */ + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +#ifndef __powerpc64__ + +extern inline unsigned long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_READ, from, n)) + return __copy_tofrom_user((__force void __user *)to, from, n); + if ((unsigned long)from < TASK_SIZE) { + over = (unsigned long)from + n - TASK_SIZE; + return __copy_tofrom_user((__force void __user *)to, from, + n - over) + over; + } + return n; +} + +extern inline unsigned long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + unsigned long over; + + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_tofrom_user(to, (__force void __user *)from, n); + if ((unsigned long)to < TASK_SIZE) { + over = (unsigned long)to + n - TASK_SIZE; + return __copy_tofrom_user(to, (__force void __user *)from, + n - over) + over; + } + return n; +} + +#else /* __powerpc64__ */ + +#define __copy_in_user(to, from, size) \ + __copy_tofrom_user((to), (from), (size)) + +extern unsigned long copy_from_user(void *to, const void __user *from, + unsigned long n); +extern unsigned long copy_to_user(void __user *to, const void *from, + unsigned long n); +extern unsigned long copy_in_user(void __user *to, const void __user *from, + unsigned long n); + +#endif /* __powerpc64__ */ + +static inline unsigned long __copy_from_user_inatomic(void *to, + const void __user *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret; + + switch (n) { + case 1: + __get_user_size(*(u8 *)to, from, 1, ret); + break; + case 2: + __get_user_size(*(u16 *)to, from, 2, ret); + break; + case 4: + __get_user_size(*(u32 *)to, from, 4, ret); + break; + case 8: + __get_user_size(*(u64 *)to, from, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user((__force void __user *)to, from, n); +} + +static inline unsigned long __copy_to_user_inatomic(void __user *to, + const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret; + + switch (n) { + case 1: + __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); + break; + case 2: + __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); + break; + case 4: + __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); + break; + case 8: + __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); + break; + } + if (ret == 0) + return 0; + } + return __copy_tofrom_user(to, (__force const void __user *)from, n); +} + +static inline unsigned long __copy_from_user(void *to, + const void __user *from, unsigned long size) +{ + might_sleep(); + return __copy_from_user_inatomic(to, from, size); +} + +static inline unsigned long __copy_to_user(void __user *to, + const void *from, unsigned long size) +{ + might_sleep(); + return __copy_to_user_inatomic(to, from, size); +} + +extern unsigned long __clear_user(void __user *addr, unsigned long size); + +static inline unsigned long clear_user(void __user *addr, unsigned long size) +{ + might_sleep(); + if (likely(access_ok(VERIFY_WRITE, addr, size))) + return __clear_user(addr, size); + if ((unsigned long)addr < TASK_SIZE) { + unsigned long over = (unsigned long)addr + size - TASK_SIZE; + return __clear_user(addr, size - over) + over; + } + return size; +} + +extern int __strncpy_from_user(char *dst, const char __user *src, long count); + +static inline long strncpy_from_user(char *dst, const char __user *src, + long count) +{ + might_sleep(); + if (likely(access_ok(VERIFY_READ, src, 1))) + return __strncpy_from_user(dst, src, count); + return -EFAULT; +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 for error + */ +extern int __strnlen_user(const char __user *str, long len, unsigned long top); + +/* + * Returns the length of the string at str (including the null byte), + * or 0 if we hit a page we can't access, + * or something > len if we didn't find a null byte. + * + * The `top' parameter to __strnlen_user is to make sure that + * we can never overflow from the user area into kernel space. + */ +static inline int strnlen_user(const char __user *str, long len) +{ + unsigned long top = current->thread.fs.seg; + + if ((unsigned long)str > top) + return 0; + return __strnlen_user(str, len, top); +} + +#define strlen_user(str) strnlen_user((str), 0x7ffffffe) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/include/asm-powerpc/ucontext.h b/include/asm-powerpc/ucontext.h new file mode 100644 index 000000000000..d9a4ddf0cc86 --- /dev/null +++ b/include/asm-powerpc/ucontext.h @@ -0,0 +1,40 @@ +#ifndef _ASM_POWERPC_UCONTEXT_H +#define _ASM_POWERPC_UCONTEXT_H + +#ifdef __powerpc64__ +#include <asm/sigcontext.h> +#else +#include <asm/elf.h> +#endif +#include <asm/signal.h> + +#ifndef __powerpc64__ +struct mcontext { + elf_gregset_t mc_gregs; + elf_fpregset_t mc_fregs; + unsigned long mc_pad[2]; + elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); +}; +#endif + +struct ucontext { + unsigned long uc_flags; + struct ucontext __user *uc_link; + stack_t uc_stack; +#ifndef __powerpc64__ + int uc_pad[7]; + struct mcontext __user *uc_regs;/* points to uc_mcontext field */ +#endif + sigset_t uc_sigmask; + /* glibc has 1024-bit signal masks, ours are 64-bit */ +#ifdef __powerpc64__ + sigset_t __unused[15]; /* Allow for uc_sigmask growth */ + struct sigcontext uc_mcontext; /* last for extensibility */ +#else + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext uc_mcontext; +#endif +}; + +#endif /* _ASM_POWERPC_UCONTEXT_H */ diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h deleted file mode 100644 index e30f536fd830..000000000000 --- a/include/asm-ppc/bitops.h +++ /dev/null @@ -1,460 +0,0 @@ -/* - * bitops.h: Bit string operations on the ppc - */ - -#ifdef __KERNEL__ -#ifndef _PPC_BITOPS_H -#define _PPC_BITOPS_H - -#include <linux/config.h> -#include <linux/compiler.h> -#include <asm/byteorder.h> -#include <asm/atomic.h> - -/* - * The test_and_*_bit operations are taken to imply a memory barrier - * on SMP systems. - */ -#ifdef CONFIG_SMP -#define SMP_WMB "eieio\n" -#define SMP_MB "\nsync" -#else -#define SMP_WMB -#define SMP_MB -#endif /* CONFIG_SMP */ - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - or %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc" ); -} - -/* - * non-atomic version - */ -static __inline__ void __set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p |= mask; -} - -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - andc %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -/* - * non-atomic version - */ -static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p &= ~mask; -} - -static __inline__ void change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__("\n\ -1: lwarx %0,0,%3 \n\ - xor %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -/* - * non-atomic version - */ -static __inline__ void __change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - *p ^= mask; -} - -/* - * test_and_*_bit do imply a memory barrier (?) - */ -static __inline__ int test_and_set_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - or %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old | mask; - return (old & mask) != 0; -} - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - andc %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old & ~mask; - return (old & mask) != 0; -} - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - xor %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -/* - * non-atomic version - */ -static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - unsigned long old = *p; - - *p = old ^ mask; - return (old & mask) != 0; -} - -static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr) -{ - return ((addr[nr >> 5] >> (nr & 0x1f)) & 1) != 0; -} - -/* Return the bit position of the most significant 1 bit in a word */ -static __inline__ int __ilog2(unsigned long x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 31 - lz; -} - -static __inline__ int ffz(unsigned long x) -{ - if ((x = ~x) == 0) - return 32; - return __ilog2(x & -x); -} - -static inline int __ffs(unsigned long x) -{ - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - return __ilog2(x & -x) + 1; -} - -/* - * fls: find last (most-significant) bit set. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -static __inline__ int fls(unsigned int x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 32 - lz; -} - -/* - * hweightN: returns the hamming weight (i.e. the number - * of bits set) of a N-bit word - */ - -#define hweight32(x) generic_hweight32(x) -#define hweight16(x) generic_hweight16(x) -#define hweight8(x) generic_hweight8(x) - -/* - * Find the first bit set in a 140-bit bitmap. - * The first 100 bits are unlikely to be set. - */ -static inline int sched_find_first_bit(const unsigned long *b) -{ - if (unlikely(b[0])) - return __ffs(b[0]); - if (unlikely(b[1])) - return __ffs(b[1]) + 32; - if (unlikely(b[2])) - return __ffs(b[2]) + 64; - if (b[3]) - return __ffs(b[3]) + 96; - return __ffs(b[4]) + 128; -} - -/** - * find_next_bit - find the next set bit in a memory region - * @addr: The address to base the search on - * @offset: The bitnumber to start searching at - * @size: The maximum size to search - */ -static __inline__ unsigned long find_next_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = *p++; - tmp &= ~0UL << offset; - if (size < 32) - goto found_first; - if (tmp) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = *p++) != 0) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = *p; - -found_first: - tmp &= ~0UL >> (32 - size); - if (tmp == 0UL) /* Are any bits set? */ - return result + size; /* Nope. */ -found_middle: - return result + __ffs(tmp); -} - -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -#define find_first_bit(addr, size) \ - find_next_bit((addr), (size), 0) - -/* - * This implementation of find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h. - */ -#define find_first_zero_bit(addr, size) \ - find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, unsigned long offset) -{ - unsigned int * p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = *p++; - tmp |= ~0UL >> (32-offset); - if (size < 32) - goto found_first; - if (tmp != ~0U) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = *p++) != ~0U) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = *p; -found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - - -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)(addr)) - -static __inline__ int ext2_test_bit(int nr, __const__ void * addr) -{ - __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; - - return (ADDR[nr >> 3] >> (nr & 7)) & 1; -} - -/* - * This implementation of ext2_find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h and modified for a big-endian machine. - */ - -#define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long ext2_find_next_zero_bit(const void *addr, - unsigned long size, unsigned long offset) -{ - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if (offset) { - tmp = cpu_to_le32p(p++); - tmp |= ~0UL >> (32-offset); - if (size < 32) - goto found_first; - if (tmp != ~0U) - goto found_middle; - size -= 32; - result += 32; - } - while (size >= 32) { - if ((tmp = cpu_to_le32p(p++)) != ~0U) - goto found_middle; - result += 32; - size -= 32; - } - if (!size) - return result; - tmp = cpu_to_le32p(p); -found_first: - tmp |= ~0U << size; - if (tmp == ~0UL) /* Are any bits zero? */ - return result + size; /* Nope. */ -found_middle: - return result + ffz(tmp); -} - -/* Bitmap functions for the minix filesystem. */ -#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr) -#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr)) -#define minix_test_and_clear_bit(nr,addr) ext2_clear_bit(nr,addr) -#define minix_test_bit(nr,addr) ext2_test_bit(nr,addr) -#define minix_find_first_zero_bit(addr,size) ext2_find_first_zero_bit(addr,size) - -#endif /* _PPC_BITOPS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h index 5bbb8e2c1c6d..973e60908234 100644 --- a/include/asm-ppc/commproc.h +++ b/include/asm-ppc/commproc.h @@ -83,6 +83,8 @@ extern uint m8xx_cpm_hostalloc(uint size); extern int m8xx_cpm_hostfree(uint start); extern void m8xx_cpm_hostdump(void); +extern void cpm_load_patch(volatile immap_t *immr); + /* Buffer descriptors used by many of the CPM protocols. */ typedef struct cpm_buf_desc { diff --git a/include/asm-ppc/futex.h b/include/asm-ppc/futex.h deleted file mode 100644 index 9feff4ce1424..000000000000 --- a/include/asm-ppc/futex.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#ifdef __KERNEL__ - -#include <linux/futex.h> -#include <asm/errno.h> -#include <asm/uaccess.h> - -static inline int -futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - inc_preempt_count(); - - switch (op) { - case FUTEX_OP_SET: - case FUTEX_OP_ADD: - case FUTEX_OP_OR: - case FUTEX_OP_ANDN: - case FUTEX_OP_XOR: - default: - ret = -ENOSYS; - } - - dec_preempt_count(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -#endif -#endif diff --git a/include/asm-ppc/ipcbuf.h b/include/asm-ppc/ipcbuf.h deleted file mode 100644 index fab6752c7480..000000000000 --- a/include/asm-ppc/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __PPC_IPCBUF_H__ -#define __PPC_IPCBUF_H__ - -/* - * The ipc64_perm structure for PPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 1 32-bit value to fill up for 8-byte alignment - * - 2 miscellaneous 64-bit values (so that this structure matches - * PPC64 ipc64_perm) - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned long seq; - unsigned int __pad2; - unsigned long long __unused1; - unsigned long long __unused2; -}; - -#endif /* __PPC_IPCBUF_H__ */ diff --git a/include/asm-ppc/kexec.h b/include/asm-ppc/kexec.h deleted file mode 100644 index 6d2aa0aa4642..000000000000 --- a/include/asm-ppc/kexec.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _PPC_KEXEC_H -#define _PPC_KEXEC_H - -#ifdef CONFIG_KEXEC - -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - * - * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct - * calculation for the amount of memory directly mappable into the - * kernel memory space. - */ - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) -/* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_PPC - -#ifndef __ASSEMBLY__ - -extern void *crash_notes; - -struct kimage; - -extern void machine_kexec_simple(struct kimage *image); - -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_KEXEC */ - -#endif /* _PPC_KEXEC_H */ diff --git a/include/asm-ppc/ptrace.h b/include/asm-ppc/ptrace.h deleted file mode 100644 index c34fb4e37a97..000000000000 --- a/include/asm-ppc/ptrace.h +++ /dev/null @@ -1,152 +0,0 @@ -#ifndef _PPC_PTRACE_H -#define _PPC_PTRACE_H - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - * - * this should only contain volatile regs - * since we can keep non-volatile in the thread_struct - * should set this up when only volatiles are saved - * by intr code. - * - * Since this is going on the stack, *CARE MUST BE TAKEN* to insure - * that the overall structure is a multiple of 16 bytes in length. - * - * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/ppc/kernel/ptrace.c. - */ - -#ifndef __ASSEMBLY__ -struct pt_regs { - unsigned long gpr[32]; - unsigned long nip; - unsigned long msr; - unsigned long orig_gpr3; /* Used for restarting system calls */ - unsigned long ctr; - unsigned long link; - unsigned long xer; - unsigned long ccr; - unsigned long mq; /* 601 only (not used at present) */ - /* Used on APUS to hold IPL value. */ - unsigned long trap; /* Reason for being here */ - /* N.B. for critical exceptions on 4xx, the dar and dsisr - fields are overloaded to hold srr0 and srr1. */ - unsigned long dar; /* Fault registers */ - unsigned long dsisr; /* on 4xx/Book-E used for ESR */ - unsigned long result; /* Result of a system call */ -}; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ - -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 64 - -#ifndef __ASSEMBLY__ -#define instruction_pointer(regs) ((regs)->nip) -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) - -#define force_successful_syscall_return() \ - do { \ - current_thread_info()->syscall_noerror = 1; \ - } while(0) - -/* - * We use the least-significant bit of the trap field to indicate - * whether we have saved the full set of registers, or only a - * partial set. A 1 there means the partial set. - * On 4xx we use the next bit to indicate whether the exception - * is a critical exception (1 means it is). - */ -#define FULL_REGS(regs) (((regs)->trap & 1) == 0) -#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0) -#define TRAP(regs) ((regs)->trap & ~0xF) - -#define CHECK_FULL_REGS(regs) \ -do { \ - if ((regs)->trap & 1) \ - printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ -} while (0) -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -/* - * Offsets used by 'ptrace' system call interface. - * These can't be changed without breaking binary compatibility - * with MkLinux, etc. - */ -#define PT_R0 0 -#define PT_R1 1 -#define PT_R2 2 -#define PT_R3 3 -#define PT_R4 4 -#define PT_R5 5 -#define PT_R6 6 -#define PT_R7 7 -#define PT_R8 8 -#define PT_R9 9 -#define PT_R10 10 -#define PT_R11 11 -#define PT_R12 12 -#define PT_R13 13 -#define PT_R14 14 -#define PT_R15 15 -#define PT_R16 16 -#define PT_R17 17 -#define PT_R18 18 -#define PT_R19 19 -#define PT_R20 20 -#define PT_R21 21 -#define PT_R22 22 -#define PT_R23 23 -#define PT_R24 24 -#define PT_R25 25 -#define PT_R26 26 -#define PT_R27 27 -#define PT_R28 28 -#define PT_R29 29 -#define PT_R30 30 -#define PT_R31 31 - -#define PT_NIP 32 -#define PT_MSR 33 -#ifdef __KERNEL__ -#define PT_ORIG_R3 34 -#endif -#define PT_CTR 35 -#define PT_LNK 36 -#define PT_XER 37 -#define PT_CCR 38 -#define PT_MQ 39 - -#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ -#define PT_FPR31 (PT_FPR0 + 2*31) -#define PT_FPSCR (PT_FPR0 + 2*32 + 1) - -/* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 - -/* Get/set all the upper 32-bits of the SPE registers, accumulator, and - * spefscr, in one go */ -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 - -/* - * Get or set a debug register. The first 16 are DABR registers and the - * second 16 are IABR registers. - */ -#define PTRACE_GET_DEBUGREG 25 -#define PTRACE_SET_DEBUGREG 26 - -#endif diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h deleted file mode 100644 index b7a417e0a921..000000000000 --- a/include/asm-ppc/sigcontext.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_PPC_SIGCONTEXT_H -#define _ASM_PPC_SIGCONTEXT_H - -#include <asm/ptrace.h> -#include <linux/compiler.h> - -struct sigcontext { - unsigned long _unused[4]; - int signal; - unsigned long handler; - unsigned long oldmask; - struct pt_regs __user *regs; -}; - -#endif diff --git a/include/asm-ppc/stat.h b/include/asm-ppc/stat.h deleted file mode 100644 index cadb34298496..000000000000 --- a/include/asm-ppc/stat.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _PPC_STAT_H -#define _PPC_STAT_H - -#ifdef __KERNEL__ -#include <linux/types.h> -#endif /* __KERNEL__ */ - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned st_dev; - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - unsigned st_rdev; - off_t st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1. - */ -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned short int __pad2; - long long st_size; /* Size of file, in bytes. */ - long st_blksize; /* Optimal block size for I/O. */ - - long long st_blocks; /* Number 512-byte blocks allocated. */ - long st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - long st_mtime; /* Time of last modification. */ - unsigned long int st_mtime_nsec; - long st_ctime; /* Time of last status change. */ - unsigned long int st_ctime_nsec; - unsigned long int __unused4; - unsigned long int __unused5; -}; -#endif diff --git a/include/asm-ppc/tlbflush.h b/include/asm-ppc/tlbflush.h deleted file mode 100644 index 9afee4ffc835..000000000000 --- a/include/asm-ppc/tlbflush.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-ppc/tlbflush.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifdef __KERNEL__ -#ifndef _PPC_TLBFLUSH_H -#define _PPC_TLBFLUSH_H - -#include <linux/config.h> -#include <linux/mm.h> - -extern void _tlbie(unsigned long address); -extern void _tlbia(void); - -#if defined(CONFIG_4xx) - -#ifndef CONFIG_44x -#define __tlbia() asm volatile ("sync; tlbia; isync" : : : "memory") -#else -#define __tlbia _tlbia -#endif - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#elif defined(CONFIG_FSL_BOOKE) - -/* TODO: determine if flush_tlb_range & flush_tlb_kernel_range - * are best implemented as tlbia vs specific tlbie's */ - -#define __tlbia() _tlbia() - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#elif defined(CONFIG_8xx) -#define __tlbia() asm volatile ("tlbia; sync" : : : "memory") - -static inline void flush_tlb_mm(struct mm_struct *mm) - { __tlbia(); } -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) - { _tlbie(vmaddr); } -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) - { __tlbia(); } -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) - { __tlbia(); } - -#else /* 6xx, 7xx, 7xxx cpus */ -struct mm_struct; -struct vm_area_struct; -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); -extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -#endif - -/* - * This is called in munmap when we have freed up some page-table - * pages. We don't need to do anything here, there's nothing special - * about our page-table pages. -- paulus - */ -static inline void flush_tlb_pgtables(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ -} - -/* - * This gets called at the end of handling a page fault, when - * the kernel has put a new PTE into the page table for the process. - * We use it to ensure coherency between the i-cache and d-cache - * for the page which has just been mapped in. - * On machines which use an MMU hash table, we use this to put a - * corresponding HPTE into the hash table ahead of time, instead of - * waiting for the inevitable extra hash-table miss exception. - */ -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); - -#endif /* _PPC_TLBFLUSH_H */ -#endif /*__KERNEL__ */ diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h deleted file mode 100644 index 63f56224da8c..000000000000 --- a/include/asm-ppc/uaccess.h +++ /dev/null @@ -1,393 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_UACCESS_H -#define _PPC_UACCESS_H - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define KERNEL_DS ((mm_segment_t) { ~0UL }) -#define USER_DS ((mm_segment_t) { TASK_SIZE - 1 }) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __access_ok(addr,size) \ - ((addr) <= current->thread.fs.seg \ - && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr))) - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size))) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user64(x,ptr) \ - __get_user64_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define put_user64(x,ptr) put_user(x,ptr) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user64(x,ptr) \ - __get_user64_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __put_user64(x,ptr) __put_user(x,ptr) - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __chk_user_ptr(ptr); \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "stb"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "sth"); \ - break; \ - case 4: \ - __put_user_asm(x, ptr, retval, "stw"); \ - break; \ - case 8: \ - __put_user_asm2(x, ptr, retval); \ - break; \ - default: \ - __put_user_bad(); \ - } \ -} while (0) - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - __chk_user_ptr(ptr); \ - __get_user_size64(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user64_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - long long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_size64(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "lbz"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "lhz"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "lwz"); \ - break; \ - case 8: \ - __get_user_asm2(x, ptr, retval); \ - break; \ - default: \ - x = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2)\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".previous" \ - : "=r"(err), "=r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,4b\n" \ - " .long 2b,4b\n" \ - ".previous" \ - : "=r"(err), "=&r"(x) \ - : "b"(addr), "i"(-EFAULT), "0"(err)) - -/* more complex routines */ - -extern int __copy_tofrom_user(void __user *to, const void __user *from, - unsigned long size); - -extern inline unsigned long -copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, n - over) + over; - } - return n; -} - -extern inline unsigned long -copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *) from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over; - } - return n; -} - -static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size) -{ - return __copy_tofrom_user((__force void __user *)to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size) -{ - return __copy_tofrom_user(to, (__force void __user *)from, size); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -extern inline unsigned long -clear_user(void __user *addr, unsigned long size) -{ - if (access_ok(VERIFY_WRITE, addr, size)) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -extern inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - if (access_ok(VERIFY_READ, src, 1)) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ - -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -extern __inline__ int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _PPC_UACCESS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ucontext.h b/include/asm-ppc/ucontext.h deleted file mode 100644 index 664bc984d51f..000000000000 --- a/include/asm-ppc/ucontext.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASMPPC_UCONTEXT_H -#define _ASMPPC_UCONTEXT_H - -#include <asm/elf.h> -#include <asm/signal.h> - -struct mcontext { - elf_gregset_t mc_gregs; - elf_fpregset_t mc_fregs; - unsigned long mc_pad[2]; - elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); -}; - -struct ucontext { - unsigned long uc_flags; - struct ucontext __user *uc_link; - stack_t uc_stack; - int uc_pad[7]; - struct mcontext __user *uc_regs;/* points to uc_mcontext field */ - sigset_t uc_sigmask; - /* glibc has 1024-bit signal masks, ours are 64-bit */ - int uc_maskext[30]; - int uc_pad2[3]; - struct mcontext uc_mcontext; -}; - -#endif /* !_ASMPPC_UCONTEXT_H */ diff --git a/include/asm-ppc64/bitops.h b/include/asm-ppc64/bitops.h deleted file mode 100644 index dbfa42ef4a99..000000000000 --- a/include/asm-ppc64/bitops.h +++ /dev/null @@ -1,360 +0,0 @@ -/* - * PowerPC64 atomic bit operations. - * Dave Engebretsen, Todd Inglett, Don Reed, Pat McCarthy, Peter Bergner, - * Anton Blanchard - * - * Originally taken from the 32b PPC code. Modified to use 64b values for - * the various counters & memory references. - * - * Bitops are odd when viewed on big-endian systems. They were designed - * on little endian so the size of the bitset doesn't matter (low order bytes - * come first) as long as the bit in question is valid. - * - * Bits are "tested" often using the C expression (val & (1<<nr)) so we do - * our best to stay compatible with that. The assumption is that val will - * be unsigned long for such tests. As such, we assume the bits are stored - * as an array of unsigned long (the usual case is a single unsigned long, - * of course). Here's an example bitset with bit numbering: - * - * |63..........0|127........64|195.......128|255.......196| - * - * This leads to a problem. If an int, short or char is passed as a bitset - * it will be a bad memory reference since we want to store in chunks - * of unsigned long (64 bits here) size. - * - * There are a few little-endian macros used mostly for filesystem bitmaps, - * these work on similar bit arrays layouts, but byte-oriented: - * - * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| - * - * The main difference is that bit 3-5 in the bit number field needs to be - * reversed compared to the big-endian bit fields. This can be achieved - * by XOR with 0b111000 (0x38). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PPC64_BITOPS_H -#define _PPC64_BITOPS_H - -#ifdef __KERNEL__ - -#include <asm/synch.h> - -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - -static __inline__ int test_bit(unsigned long nr, __const__ volatile unsigned long *addr) -{ - return (1UL & (addr[nr >> 6] >> (nr & 63))); -} - -static __inline__ void set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # set_bit\n\ - or %0,%0,%2\n\ - stdcx. %0,0,%3\n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -static __inline__ void clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # clear_bit\n\ - andc %0,%0,%2\n\ - stdcx. %0,0,%3\n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -static __inline__ void change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # change_bit\n\ - xor %0,%0,%2\n\ - stdcx. %0,0,%3\n\ - bne- 1b" - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( - EIEIO_ON_SMP -"1: ldarx %0,0,%3 # test_and_set_bit\n\ - or %1,%0,%2 \n\ - stdcx. %1,0,%3 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( - EIEIO_ON_SMP -"1: ldarx %0,0,%3 # test_and_clear_bit\n\ - andc %1,%0,%2\n\ - stdcx. %1,0,%3\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - __asm__ __volatile__( - EIEIO_ON_SMP -"1: ldarx %0,0,%3 # test_and_change_bit\n\ - xor %1,%0,%2\n\ - stdcx. %1,0,%3\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ void set_bits(unsigned long mask, unsigned long *addr) -{ - unsigned long old; - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # set_bit\n\ - or %0,%0,%2\n\ - stdcx. %0,0,%3\n\ - bne- 1b" - : "=&r" (old), "=m" (*addr) - : "r" (mask), "r" (addr), "m" (*addr) - : "cc"); -} - -/* - * non-atomic versions - */ -static __inline__ void __set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - *p |= mask; -} - -static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - *p &= ~mask; -} - -static __inline__ void __change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - - *p ^= mask; -} - -static __inline__ int __test_and_set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - unsigned long old = *p; - - *p = old | mask; - return (old & mask) != 0; -} - -static __inline__ int __test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - unsigned long old = *p; - - *p = old & ~mask; - return (old & mask) != 0; -} - -static __inline__ int __test_and_change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long mask = 1UL << (nr & 0x3f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 6); - unsigned long old = *p; - - *p = old ^ mask; - return (old & mask) != 0; -} - -/* - * Return the zero-based bit position (from RIGHT TO LEFT, 63 -> 0) of the - * most significant (left-most) 1-bit in a double word. - */ -static __inline__ int __ilog2(unsigned long x) -{ - int lz; - - asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); - return 63 - lz; -} - -/* - * Determines the bit position of the least significant (rightmost) 0 bit - * in the specified double word. The returned bit position will be zero-based, - * starting from the right side (63 - 0). - */ -static __inline__ unsigned long ffz(unsigned long x) -{ - /* no zero exists anywhere in the 8 byte area. */ - if ((x = ~x) == 0) - return 64; - - /* - * Calculate the bit position of the least signficant '1' bit in x - * (since x has been changed this will actually be the least signficant - * '0' bit in * the original x). Note: (x & -x) gives us a mask that - * is the least significant * (RIGHT-most) 1-bit of the value in x. - */ - return __ilog2(x & -x); -} - -static __inline__ int __ffs(unsigned long x) -{ - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - unsigned long i = (unsigned long)x; - return __ilog2(i & -i) + 1; -} - -/* - * fls: find last (most-significant) bit set. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -#define fls(x) generic_fls(x) - -/* - * hweightN: returns the hamming weight (i.e. the number - * of bits set) of a N-bit word - */ -#define hweight64(x) generic_hweight64(x) -#define hweight32(x) generic_hweight32(x) -#define hweight16(x) generic_hweight16(x) -#define hweight8(x) generic_hweight8(x) - -extern unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, unsigned long offset); -#define find_first_zero_bit(addr, size) \ - find_next_zero_bit((addr), (size), 0) - -extern unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset); -#define find_first_bit(addr, size) \ - find_next_bit((addr), (size), 0) - -extern unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, unsigned long offset); -#define find_first_zero_le_bit(addr, size) \ - find_next_zero_le_bit((addr), (size), 0) - -static __inline__ int test_le_bit(unsigned long nr, __const__ unsigned long * addr) -{ - __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; - return (ADDR[nr >> 3] >> (nr & 7)) & 1; -} - -#define test_and_clear_le_bit(nr, addr) \ - test_and_clear_bit((nr) ^ 0x38, (addr)) -#define test_and_set_le_bit(nr, addr) \ - test_and_set_bit((nr) ^ 0x38, (addr)) - -/* - * non-atomic versions - */ - -#define __set_le_bit(nr, addr) \ - __set_bit((nr) ^ 0x38, (addr)) -#define __clear_le_bit(nr, addr) \ - __clear_bit((nr) ^ 0x38, (addr)) -#define __test_and_clear_le_bit(nr, addr) \ - __test_and_clear_bit((nr) ^ 0x38, (addr)) -#define __test_and_set_le_bit(nr, addr) \ - __test_and_set_bit((nr) ^ 0x38, (addr)) - -#define ext2_set_bit(nr,addr) \ - __test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit(nr, addr) \ - __test_and_clear_le_bit((nr), (unsigned long*)addr) - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_le_bit((nr), (unsigned long*)addr) - - -#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) -#define ext2_find_first_zero_bit(addr, size) \ - find_first_zero_le_bit((unsigned long*)addr, size) -#define ext2_find_next_zero_bit(addr, size, off) \ - find_next_zero_le_bit((unsigned long*)addr, size, off) - -#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr) -#define minix_set_bit(nr,addr) set_bit(nr,addr) -#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr) -#define minix_test_bit(nr,addr) test_bit(nr,addr) -#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) - -#endif /* __KERNEL__ */ -#endif /* _PPC64_BITOPS_H */ diff --git a/include/asm-ppc64/io.h b/include/asm-ppc64/io.h index bd7c9532d77b..77fc07c3c6bd 100644 --- a/include/asm-ppc64/io.h +++ b/include/asm-ppc64/io.h @@ -13,7 +13,7 @@ #include <asm/page.h> #include <asm/byteorder.h> #ifdef CONFIG_PPC_ISERIES -#include <asm/iSeries/iSeries_io.h> +#include <asm/iseries/iseries_io.h> #endif #include <asm/synch.h> #include <asm/delay.h> diff --git a/include/asm-ppc64/ipcbuf.h b/include/asm-ppc64/ipcbuf.h deleted file mode 100644 index fa393c8342af..000000000000 --- a/include/asm-ppc64/ipcbuf.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __PPC64_IPCBUF_H__ -#define __PPC64_IPCBUF_H__ - -/* - * The ipc64_perm structure for the PPC is identical to kern_ipc_perm - * as we have always had 32-bit UIDs and GIDs in the kernel. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned int seq; - unsigned int __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __PPC64_IPCBUF_H__ */ diff --git a/include/asm-ppc64/kexec.h b/include/asm-ppc64/kexec.h deleted file mode 100644 index 511908afaeeb..000000000000 --- a/include/asm-ppc64/kexec.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _PPC64_KEXEC_H -#define _PPC64_KEXEC_H - -/* - * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. - * I.e. Maximum page that is mapped directly into kernel memory, - * and kmap is not required. - */ - -/* Maximum physical address we can use pages from */ -/* XXX: since we copy virt we can use any page we allocate */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) - -/* Maximum address we can reach in physical address mode */ -/* XXX: I want to allow initrd in highmem. otherwise set to rmo on lpar */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) - -/* Maximum address we can use for the control code buffer */ -/* XXX: unused today, ppc32 uses TASK_SIZE, probably left over from use_mm */ -#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) - -/* XXX: today we don't use this at all, althogh we have a static stack */ -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_PPC64 - -#define MAX_NOTE_BYTES 1024 - -#ifndef __ASSEMBLY__ - -typedef u32 note_buf_t[MAX_NOTE_BYTES/4]; - -extern note_buf_t crash_notes[]; - -extern void kexec_smp_wait(void); /* get and clear naca physid, wait for - master to copy new code to 0 */ - -#endif /* __ASSEMBLY__ */ -#endif /* _PPC_KEXEC_H */ - diff --git a/include/asm-ppc64/mmu_context.h b/include/asm-ppc64/mmu_context.h index 77a743402db4..820dd729b895 100644 --- a/include/asm-ppc64/mmu_context.h +++ b/include/asm-ppc64/mmu_context.h @@ -16,21 +16,6 @@ * 2 of the License, or (at your option) any later version. */ -/* - * Every architecture must define this function. It's the fastest - * way of searching a 140-bit bitmap where the first 100 bits are - * unlikely to be set. It's guaranteed that at least one of the 140 - * bits is cleared. - */ -static inline int sched_find_first_bit(unsigned long *b) -{ - if (unlikely(b[0])) - return __ffs(b[0]); - if (unlikely(b[1])) - return __ffs(b[1]) + 64; - return __ffs(b[2]) + 128; -} - static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } diff --git a/include/asm-ppc64/numnodes.h b/include/asm-ppc64/numnodes.h deleted file mode 100644 index 75ae0b906708..000000000000 --- a/include/asm-ppc64/numnodes.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_MAX_NUMNODES_H -#define _ASM_MAX_NUMNODES_H - -/* Max 16 Nodes */ -#define NODES_SHIFT 4 - -#endif /* _ASM_MAX_NUMNODES_H */ diff --git a/include/asm-ppc64/nvram.h b/include/asm-ppc64/nvram.h index dfaa21566c9a..def47d720d3d 100644 --- a/include/asm-ppc64/nvram.h +++ b/include/asm-ppc64/nvram.h @@ -70,7 +70,7 @@ extern struct nvram_partition *nvram_find_partition(int sig, const char *name); extern int pSeries_nvram_init(void); extern int pmac_nvram_init(void); -extern int bpa_nvram_init(void); +extern int mmio_nvram_init(void); /* PowerMac specific nvram stuffs */ diff --git a/include/asm-ppc64/paca.h b/include/asm-ppc64/paca.h index 2f0f36f73d38..f68fe91debaf 100644 --- a/include/asm-ppc64/paca.h +++ b/include/asm-ppc64/paca.h @@ -19,7 +19,7 @@ #include <linux/config.h> #include <asm/types.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpRegSave.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/mmu.h> register struct paca_struct *local_paca asm("r13"); diff --git a/include/asm-ppc64/plpar_wrappers.h b/include/asm-ppc64/plpar_wrappers.h deleted file mode 100644 index 72dd2449ee76..000000000000 --- a/include/asm-ppc64/plpar_wrappers.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef _PPC64_PLPAR_WRAPPERS_H -#define _PPC64_PLPAR_WRAPPERS_H - -#include <asm/hvcall.h> - -static inline long poll_pending(void) -{ - unsigned long dummy; - return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, - &dummy, &dummy, &dummy); -} - -static inline long prod_processor(void) -{ - plpar_hcall_norets(H_PROD); - return(0); -} - -static inline long cede_processor(void) -{ - plpar_hcall_norets(H_CEDE); - return(0); -} - -static inline long register_vpa(unsigned long flags, unsigned long proc, - unsigned long vpa) -{ - return plpar_hcall_norets(H_REGISTER_VPA, flags, proc, vpa); -} - -void vpa_init(int cpu); - -static inline long plpar_pte_remove(unsigned long flags, - unsigned long ptex, - unsigned long avpn, - unsigned long *old_pteh_ret, - unsigned long *old_ptel_ret) -{ - unsigned long dummy; - return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, - old_pteh_ret, old_ptel_ret, &dummy); -} - -static inline long plpar_pte_read(unsigned long flags, - unsigned long ptex, - unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) -{ - unsigned long dummy; - return plpar_hcall(H_READ, flags, ptex, 0, 0, - old_pteh_ret, old_ptel_ret, &dummy); -} - -static inline long plpar_pte_protect(unsigned long flags, - unsigned long ptex, - unsigned long avpn) -{ - return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); -} - -static inline long plpar_tce_get(unsigned long liobn, - unsigned long ioba, - unsigned long *tce_ret) -{ - unsigned long dummy; - return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, - tce_ret, &dummy, &dummy); -} - -static inline long plpar_tce_put(unsigned long liobn, - unsigned long ioba, - unsigned long tceval) -{ - return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); -} - -static inline long plpar_tce_put_indirect(unsigned long liobn, - unsigned long ioba, - unsigned long page, - unsigned long count) -{ - return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); -} - -static inline long plpar_tce_stuff(unsigned long liobn, - unsigned long ioba, - unsigned long tceval, - unsigned long count) -{ - return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); -} - -static inline long plpar_get_term_char(unsigned long termno, - unsigned long *len_ret, - char *buf_ret) -{ - unsigned long *lbuf = (unsigned long *)buf_ret; /* ToDo: alignment? */ - return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, - len_ret, lbuf+0, lbuf+1); -} - -static inline long plpar_put_term_char(unsigned long termno, - unsigned long len, - const char *buffer) -{ - unsigned long *lbuf = (unsigned long *)buffer; /* ToDo: alignment? */ - return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0], - lbuf[1]); -} - -static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) -{ - return plpar_hcall_norets(H_SET_XDABR, address, flags); -} - -static inline long plpar_set_dabr(unsigned long val) -{ - return plpar_hcall_norets(H_SET_DABR, val); -} - -#endif /* _PPC64_PLPAR_WRAPPERS_H */ diff --git a/include/asm-ppc64/spinlock.h b/include/asm-ppc64/spinlock.h index 14cb895bb607..7d84fb5e39f1 100644 --- a/include/asm-ppc64/spinlock.h +++ b/include/asm-ppc64/spinlock.h @@ -21,7 +21,7 @@ #include <linux/config.h> #include <asm/paca.h> #include <asm/hvcall.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #define __raw_spin_is_locked(x) ((x)->slock != 0) diff --git a/include/asm-ppc64/stat.h b/include/asm-ppc64/stat.h deleted file mode 100644 index 973a5f97951d..000000000000 --- a/include/asm-ppc64/stat.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _PPC64_STAT_H -#define _PPC64_STAT_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/types.h> - -struct stat { - unsigned long st_dev; - ino_t st_ino; - nlink_t st_nlink; - mode_t st_mode; - uid_t st_uid; - gid_t st_gid; - unsigned long st_rdev; - off_t st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; - unsigned long __unused6; -}; - -#define STAT_HAVE_NSEC 1 - -/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ -struct stat64 { - unsigned long st_dev; /* Device. */ - unsigned long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long st_rdev; /* Device number, if device. */ - unsigned short __pad2; - long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - - long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; -#endif diff --git a/include/asm-ppc64/tlb.h b/include/asm-ppc64/tlb.h deleted file mode 100644 index 97cb696ce68d..000000000000 --- a/include/asm-ppc64/tlb.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * TLB shootdown specifics for PPC64 - * - * Copyright (C) 2002 Anton Blanchard, IBM Corp. - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _PPC64_TLB_H -#define _PPC64_TLB_H - -#include <asm/tlbflush.h> - -struct mmu_gather; - -extern void pte_free_finish(void); - -static inline void tlb_flush(struct mmu_gather *tlb) -{ - flush_tlb_pending(); - pte_free_finish(); -} - -/* Avoid pulling in another include just for this */ -#define check_pgt_cache() do { } while (0) - -/* Get the generic bits... */ -#include <asm-generic/tlb.h> - -/* Nothing needed here in fact... */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -#endif /* _PPC64_TLB_H */ diff --git a/include/asm-ppc64/tlbflush.h b/include/asm-ppc64/tlbflush.h deleted file mode 100644 index 626f505c6ee3..000000000000 --- a/include/asm-ppc64/tlbflush.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _PPC64_TLBFLUSH_H -#define _PPC64_TLBFLUSH_H - -/* - * TLB flushing: - * - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables - */ - -#include <linux/percpu.h> -#include <asm/page.h> - -#define PPC64_TLB_BATCH_NR 192 - -struct mm_struct; -struct ppc64_tlb_batch { - unsigned long index; - struct mm_struct *mm; - pte_t pte[PPC64_TLB_BATCH_NR]; - unsigned long vaddr[PPC64_TLB_BATCH_NR]; - unsigned int large; -}; -DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); - -extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); - -static inline void flush_tlb_pending(void) -{ - struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch); - - if (batch->index) - __flush_tlb_pending(batch); - put_cpu_var(ppc64_tlb_batch); -} - -#define flush_tlb_mm(mm) flush_tlb_pending() -#define flush_tlb_page(vma, addr) flush_tlb_pending() -#define flush_tlb_page_nohash(vma, addr) do { } while (0) -#define flush_tlb_range(vma, start, end) \ - do { (void)(start); flush_tlb_pending(); } while (0) -#define flush_tlb_kernel_range(start, end) flush_tlb_pending() -#define flush_tlb_pgtables(mm, start, end) do { } while (0) - -extern void flush_hash_page(unsigned long va, pte_t pte, int local); -void flush_hash_range(unsigned long number, int local); - -#endif /* _PPC64_TLBFLUSH_H */ diff --git a/include/asm-ppc64/uaccess.h b/include/asm-ppc64/uaccess.h deleted file mode 100644 index 132c1276547b..000000000000 --- a/include/asm-ppc64/uaccess.h +++ /dev/null @@ -1,341 +0,0 @@ -#ifndef _PPC64_UACCESS_H -#define _PPC64_UACCESS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/processor.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0UL) -#define USER_DS MAKE_MM_SEG(0xf000000000000000UL) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -/* - * Use the alpha trick for checking ranges: - * - * Is a address valid? This does a straightforward calculation rather - * than tests. - * - * Address valid if: - * - "addr" doesn't have any high-bits set - * - AND "size" doesn't have any high-bits set - * - OR we are in kernel mode. - * - * We dont have to check for high bits in (addr+size) because the first - * two checks force the maximum result to be below the start of the - * kernel region. - */ -#define __access_ok(addr,size,segment) \ - (((segment).seg & (addr | size )) == 0) - -#define access_ok(type,addr,size) \ - __access_ok(((__force unsigned long)(addr)),(size),get_fs()) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - */ -#define get_user(x,ptr) \ - __get_user_check((x),(ptr),sizeof(*(ptr))) -#define put_user(x,ptr) \ - __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) - -#define __get_user_unaligned __get_user -#define __put_user_unaligned __put_user - -extern long __put_user_bad(void); - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - might_sleep(); \ - __chk_user_ptr(ptr); \ - __put_user_size((x),(ptr),(size),__pu_err,-EFAULT); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - void __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT); \ - __pu_err; \ -}) - -#define __put_user_size(x,ptr,size,retval,errret) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x,ptr,retval,"stb",errret); break; \ - case 2: __put_user_asm(x,ptr,retval,"sth",errret); break; \ - case 4: __put_user_asm(x,ptr,retval,"stw",errret); break; \ - case 8: __put_user_asm(x,ptr,retval,"std",errret); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op, errret) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # put_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .llong 1b,3b\n" \ - ".previous" \ - : "=r"(err) \ - : "r"(x), "b"(addr), "i"(errret), "0"(err)) - - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - might_sleep(); \ - __get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ,__gu_addr,size)) \ - __get_user_size(__gu_val,__gu_addr,(size),__gu_err,-EFAULT);\ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -extern long __get_user_bad(void); - -#define __get_user_size(x,ptr,size,retval,errret) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: __get_user_asm(x,ptr,retval,"lbz",errret); break; \ - case 2: __get_user_asm(x,ptr,retval,"lhz",errret); break; \ - case 4: __get_user_asm(x,ptr,retval,"lwz",errret); break; \ - case 8: __get_user_asm(x,ptr,retval,"ld",errret); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_asm(x, addr, err, op, errret) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # get_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .llong 1b,3b\n" \ - ".previous" \ - : "=r"(err), "=r"(x) \ - : "b"(addr), "i"(errret), "0"(err)) - -/* more complex routines */ - -extern unsigned long __copy_tofrom_user(void __user *to, const void __user *from, - unsigned long size); - -static inline unsigned long -__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n)) { - unsigned long ret; - - switch (n) { - case 1: - __get_user_size(*(u8 *)to, from, 1, ret, 1); - return ret; - case 2: - __get_user_size(*(u16 *)to, from, 2, ret, 2); - return ret; - case 4: - __get_user_size(*(u32 *)to, from, 4, ret, 4); - return ret; - case 8: - __get_user_size(*(u64 *)to, from, 8, ret, 8); - return ret; - } - } - return __copy_tofrom_user((__force void __user *) to, from, n); -} - -static inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, n); -} - -static inline unsigned long -__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) -{ - if (__builtin_constant_p(n)) { - unsigned long ret; - - switch (n) { - case 1: - __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1); - return ret; - case 2: - __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2); - return ret; - case 4: - __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4); - return ret; - case 8: - __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret, 8); - return ret; - } - } - return __copy_tofrom_user(to, (__force const void __user *) from, n); -} - -static inline unsigned long -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, n); -} - -#define __copy_in_user(to, from, size) \ - __copy_tofrom_user((to), (from), (size)) - -extern unsigned long copy_from_user(void *to, const void __user *from, - unsigned long n); -extern unsigned long copy_to_user(void __user *to, const void *from, - unsigned long n); -extern unsigned long copy_in_user(void __user *to, const void __user *from, - unsigned long n); - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -static inline unsigned long -clear_user(void __user *addr, unsigned long size) -{ - might_sleep(); - if (likely(access_ok(VERIFY_WRITE, addr, size))) - size = __clear_user(addr, size); - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -static inline long -strncpy_from_user(char *dst, const char __user *src, long count) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, src, 1))) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ -extern int __strnlen_user(const char __user *str, long len); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - */ -static inline int strnlen_user(const char __user *str, long len) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, str, 1))) - return __strnlen_user(str, len); - return 0; -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ - -#endif /* _PPC64_UACCESS_H */ diff --git a/include/asm-ppc64/ucontext.h b/include/asm-ppc64/ucontext.h deleted file mode 100644 index ef8cc5b37542..000000000000 --- a/include/asm-ppc64/ucontext.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASMPPC64_UCONTEXT_H -#define _ASMPPC64_UCONTEXT_H - -#include <asm/sigcontext.h> - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - sigset_t uc_sigmask; - sigset_t __unsued[15]; /* Allow for uc_sigmask growth */ - struct sigcontext uc_mcontext; /* last for extensibility */ -}; - -#endif /* _ASMPPC64_UCONTEXT_H */ |