diff options
-rw-r--r-- | Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt | 5 | ||||
-rw-r--r-- | arch/arm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/integratorcp.dts | 3 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-icst.c | 3 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-icst.h | 1 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-impd1.c | 88 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-integrator.c | 2 | ||||
-rw-r--r-- | drivers/clk/versatile/clk-realview.c | 6 | ||||
-rw-r--r-- | drivers/irqchip/irq-versatile-fpga.c | 15 |
9 files changed, 103 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt index 9989eda755d9..c9cf605bb995 100644 --- a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -29,3 +29,8 @@ pic: pic@14000000 { clear-mask = <0xffffffff>; valid-mask = <0x003fffff>; }; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8b768937c663..63ce70c988de 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -313,6 +313,8 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARCH_HAS_CPUFREQ select ARM_AMBA + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR select COMMON_CLK select COMMON_CLK_VERSATILE select GENERIC_CLOCKEVENTS diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 7deb3a3182b4..a21c17de9a5e 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -47,8 +47,11 @@ valid-mask = <0x00000007>; }; + /* The SIC is cascaded off IRQ 26 on the PIC */ sic: sic@ca000000 { compatible = "arm,versatile-fpga-irq"; + interrupt-parent = <&pic>; + interrupts = <26>; #interrupt-cells = <1>; interrupt-controller; reg = <0xca000000 0x100>; diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index f5e4c21b301f..8cbfcf88fae3 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -119,6 +119,7 @@ static const struct clk_ops icst_ops = { struct clk *icst_clk_register(struct device *dev, const struct clk_icst_desc *desc, + const char *name, void __iomem *base) { struct clk *clk; @@ -130,7 +131,7 @@ struct clk *icst_clk_register(struct device *dev, pr_err("could not allocate ICST clock!\n"); return ERR_PTR(-ENOMEM); } - init.name = "icst"; + init.name = name; init.ops = &icst_ops; init.flags = CLK_IS_ROOT; init.parent_names = NULL; diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h index dad51b6ffd00..be99dd0da785 100644 --- a/drivers/clk/versatile/clk-icst.h +++ b/drivers/clk/versatile/clk-icst.h @@ -15,4 +15,5 @@ struct clk_icst_desc { struct clk *icst_clk_register(struct device *dev, const struct clk_icst_desc *desc, + const char *name, void __iomem *base); diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c index 369139af2a3b..844f8d711a12 100644 --- a/drivers/clk/versatile/clk-impd1.c +++ b/drivers/clk/versatile/clk-impd1.c @@ -1,6 +1,6 @@ /* * Clock driver for the ARM Integrator/IM-PD1 board - * Copyright (C) 2012 Linus Walleij + * Copyright (C) 2012-2013 Linus Walleij * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -18,20 +18,28 @@ #include "clk-icst.h" struct impd1_clk { - struct clk *vcoclk; + char *vco1name; + struct clk *vco1clk; + char *vco2name; + struct clk *vco2clk; + struct clk *mmciclk; + char *uartname; struct clk *uartclk; - struct clk_lookup *clks[3]; + char *spiname; + struct clk *spiclk; + char *scname; + struct clk *scclk; + struct clk_lookup *clks[6]; }; +/* One entry for each connected IM-PD1 LM */ static struct impd1_clk impd1_clks[4]; /* - * There are two VCO's on the IM-PD1 but only one is used by the - * kernel, that is why we are only implementing the control of - * IMPD1_OSC1 here. + * There are two VCO's on the IM-PD1 */ -static const struct icst_params impd1_vco_params = { +static const struct icst_params impd1_vco1_params = { .ref = 24000000, /* 24 MHz */ .vco_max = ICST525_VCO_MAX_3V, .vco_min = ICST525_VCO_MIN, @@ -44,11 +52,29 @@ static const struct icst_params impd1_vco_params = { }; static const struct clk_icst_desc impd1_icst1_desc = { - .params = &impd1_vco_params, + .params = &impd1_vco1_params, .vco_offset = IMPD1_OSC1, .lock_offset = IMPD1_LOCK, }; +static const struct icst_params impd1_vco2_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 12, + .vd_max = 519, + .rd_min = 3, + .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +static const struct clk_icst_desc impd1_icst2_desc = { + .params = &impd1_vco2_params, + .vco_offset = IMPD1_OSC2, + .lock_offset = IMPD1_LOCK, +}; + /** * integrator_impd1_clk_init() - set up the integrator clock tree * @base: base address of the logic module (LM) @@ -66,16 +92,39 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) } imc = &impd1_clks[id]; - clk = icst_clk_register(NULL, &impd1_icst1_desc, base); - imc->vcoclk = clk; + imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id); + clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, base); + imc->vco1clk = clk; imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id); - /* UART reference clock */ - clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT, - 14745600); + /* VCO2 is also called "CLK2" */ + imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id); + clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, base); + imc->vco2clk = clk; + + /* MMCI uses CLK2 right off */ + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00700", id); + + /* UART reference clock divides CLK2 by a fixed factor 4 */ + imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id); + clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name, + CLK_IGNORE_UNUSED, 1, 4); imc->uartclk = clk; - imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id); - imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00100", id); + imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + + /* SPI PL022 clock divides CLK2 by a fixed factor 64 */ + imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id); + clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name, + CLK_IGNORE_UNUSED, 1, 64); + imc->clks[4] = clkdev_alloc(clk, NULL, "lm%x:00300", id); + + /* Smart Card clock divides CLK2 by a fixed factor 4 */ + imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id); + clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name, + CLK_IGNORE_UNUSED, 1, 4); + imc->scclk = clk; + imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00600", id); for (i = 0; i < ARRAY_SIZE(imc->clks); i++) clkdev_add(imc->clks[i]); @@ -92,6 +141,13 @@ void integrator_impd1_clk_exit(unsigned int id) for (i = 0; i < ARRAY_SIZE(imc->clks); i++) clkdev_drop(imc->clks[i]); + clk_unregister(imc->spiclk); clk_unregister(imc->uartclk); - clk_unregister(imc->vcoclk); + clk_unregister(imc->vco2clk); + clk_unregister(imc->vco1clk); + kfree(imc->scname); + kfree(imc->spiname); + kfree(imc->uartname); + kfree(imc->vco2name); + kfree(imc->vco1name); } diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c index 08593b4ee2c9..bda8967e09c2 100644 --- a/drivers/clk/versatile/clk-integrator.c +++ b/drivers/clk/versatile/clk-integrator.c @@ -78,7 +78,7 @@ void __init integrator_clk_init(bool is_cp) clk_register_clkdev(clk, NULL, "sp804"); /* ICST VCO clock used on the Integrator/CP CLCD */ - clk = icst_clk_register(NULL, &cp_icst_desc, + clk = icst_clk_register(NULL, &cp_icst_desc, "icst", __io_address(INTEGRATOR_HDR_BASE)); clk_register_clkdev(clk, NULL, "clcd"); } diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c index cda07e70a408..747e7b31117c 100644 --- a/drivers/clk/versatile/clk-realview.c +++ b/drivers/clk/versatile/clk-realview.c @@ -84,9 +84,11 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) /* ICST VCO clock */ if (is_pb1176) - clk = icst_clk_register(NULL, &realview_osc0_desc, sysbase); + clk = icst_clk_register(NULL, &realview_osc0_desc, + "osc0", sysbase); else - clk = icst_clk_register(NULL, &realview_osc4_desc, sysbase); + clk = icst_clk_register(NULL, &realview_osc4_desc, + "osc4", sysbase); clk_register_clkdev(clk, NULL, "dev:clcd"); clk_register_clkdev(clk, NULL, "issp:clcd"); diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c index 47a52ab580d8..3ae2bb8d9cf2 100644 --- a/drivers/irqchip/irq-versatile-fpga.c +++ b/drivers/irqchip/irq-versatile-fpga.c @@ -9,6 +9,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/exception.h> #include <asm/mach/irq.h> @@ -167,8 +168,12 @@ void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, f->used_irqs++; } - pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs", fpga_irq_id, name, base, f->used_irqs); + if (parent_irq != -1) + pr_cont(", parent IRQ: %d\n", parent_irq); + else + pr_cont("\n"); fpga_irq_id++; } @@ -180,6 +185,7 @@ int __init fpga_irq_of_init(struct device_node *node, void __iomem *base; u32 clear_mask; u32 valid_mask; + int parent_irq; if (WARN_ON(!node)) return -ENODEV; @@ -193,7 +199,12 @@ int __init fpga_irq_of_init(struct device_node *node, if (of_property_read_u32(node, "valid-mask", &valid_mask)) valid_mask = 0; - fpga_irq_init(base, node->name, 0, -1, valid_mask, node); + /* Some chips are cascaded from a parent IRQ */ + parent_irq = irq_of_parse_and_map(node, 0); + if (!parent_irq) + parent_irq = -1; + + fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node); writel(clear_mask, base + IRQ_ENABLE_CLEAR); writel(clear_mask, base + FIQ_ENABLE_CLEAR); |