diff options
| -rw-r--r-- | drivers/net/tulip/tulip.h | 7 | ||||
| -rw-r--r-- | drivers/net/tulip/tulip_core.c | 19 |
2 files changed, 11 insertions, 15 deletions
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 3f69f53d7768..908422f2f320 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -268,7 +268,12 @@ enum t21143_csr6_bits { #define RX_RING_SIZE 128 #define MEDIA_MASK 31 -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ +/* The receiver on the DC21143 rev 65 can fail to close the last + * receive descriptor in certain circumstances (see errata) when + * using MWI. This can only occur if the receive buffer ends on + * a cache line boundary, so the "+ 4" below ensures it doesn't. + */ +#define PKT_BUF_SZ (1536 + 4) /* Size of each temporary Rx buffer. */ #define TULIP_MIN_CACHE_LINE 8 /* in units of 32-bit words */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 82f404b76d81..fa1c1c329a2d 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1154,18 +1154,13 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev, tp->csr0 = csr0 = 0; - /* if we have any cache line size at all, we can do MRM */ - csr0 |= MRM; + /* if we have any cache line size at all, we can do MRM and MWI */ + csr0 |= MRM | MWI; - /* ...and barring hardware bugs, MWI */ - if (!(tp->chip_id == DC21143 && tp->revision == 65)) - csr0 |= MWI; - - /* set or disable MWI in the standard PCI command bit. - * Check for the case where mwi is desired but not available + /* Enable MWI in the standard PCI command bit. + * Check for the case where MWI is desired but not available */ - if (csr0 & MWI) pci_try_set_mwi(pdev); - else pci_clear_mwi(pdev); + pci_try_set_mwi(pdev); /* read result from hardware (in case bit refused to enable) */ pci_read_config_word(pdev, PCI_COMMAND, &pci_command); @@ -1401,10 +1396,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, #ifdef CONFIG_TULIP_MWI if (!force_csr0 && (tp->flags & HAS_PCI_MWI)) tulip_mwi_config (pdev, dev); -#else - /* MWI is broken for DC21143 rev 65... */ - if (chip_idx == DC21143 && pdev->revision == 65) - tp->csr0 &= ~MWI; #endif /* Stop the chip's Tx and Rx processes. */ |