diff options
41 files changed, 418 insertions, 172 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e9a3cb1d6b06..7327f37d78f3 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -711,13 +711,14 @@ define a bus type with a more complex address format, including things like address space bits, you'll have to add a bus translator to the prom_parse.c file of the recent kernels for your bus type. -The "reg" property only defines addresses and sizes (if #size-cells -is non-0) within a given bus. In order to translate addresses upward +The "reg" property only defines addresses and sizes (if #size-cells is +non-0) within a given bus. In order to translate addresses upward (that is into parent bus addresses, and possibly into CPU physical addresses), all busses must contain a "ranges" property. If the "ranges" property is missing at a given level, it's assumed that -translation isn't possible. The format of the "ranges" property for a -bus is a list of: +translation isn't possible, i.e., the registers are not visible on the +parent bus. The format of the "ranges" property for a bus is a list +of: bus address, parent bus address, size @@ -735,6 +736,10 @@ fit in a single 32-bit word. New 32-bit powerpc boards should use a 1/1 format, unless the processor supports physical addresses greater than 32-bits, in which case a 2/1 format is recommended. +Alternatively, the "ranges" property may be empty, indicating that the +registers are visible on the parent bus using an identity mapping +translation. In other words, the parent bus address space is the same +as the child bus address space. 2) Note about "compatible" properties ------------------------------------- diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index bd87626c1f60..f70df9b64f8f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -167,6 +167,9 @@ boot := arch/$(ARCH)/boot $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) +bootwrapper_install: + $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) + define archhelp @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' install - Install kernel using' diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 18e32719d0ed..e1c73e9afa59 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -243,3 +243,51 @@ clean-kernel := vmlinux.strip vmlinux.bin clean-kernel += $(addsuffix .gz,$(clean-kernel)) # If not absolute clean-files are relative to $(obj). clean-files += $(addprefix $(objtree)/, $(clean-kernel)) + +WRAPPER_OBJDIR := /usr/lib/kernel-wrapper +WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts +WRAPPER_BINDIR := /usr/sbin +INSTALL := install + +extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) +hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) +wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper +dts-installed := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts)) + +all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) + +quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_mkdir = mkdir -p $@ + +quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) + cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) + cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ + +quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ + sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ + -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ + + +$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): + $(call cmd,mkdir) + +$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) + $(call cmd,install) + +$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_exe) + +$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) + $(call cmd,install_dts) + +$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_wrapper) + +$(obj)/bootwrapper_install: $(all-installed) + diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 31147a037728..a591ced47875 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -45,6 +45,7 @@ CROSS= # directory for object and other files used by this script object=arch/powerpc/boot +objbin=$object # directory for working files tmpdir=. @@ -95,6 +96,7 @@ while [ "$#" -gt 0 ]; do shift [ "$#" -gt 0 ] || usage object="$1" + objbin="$1" ;; -W) shift @@ -116,6 +118,9 @@ while [ "$#" -gt 0 ]; do done if [ -n "$dts" ]; then + if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then + dts="$object/dts/$dts" + fi if [ -z "$dtb" ]; then dtb="$platform.dtb" fi @@ -246,11 +251,11 @@ fi # post-processing needed for some platforms case "$platform" in pseries|chrp) - $object/addnote "$ofile" + $objbin/addnote "$ofile" ;; coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" - $object/hack-coff "$ofile" + $objbin/hack-coff "$ofile" ;; cuboot*) gzip -f -9 "$ofile" @@ -259,7 +264,7 @@ cuboot*) ;; treeboot*) mv "$ofile" "$ofile.elf" - $object/mktree "$ofile.elf" "$ofile" "$base" "$entry" + $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry" if [ -z "$cacheit" ]; then rm -f "$ofile.elf" fi @@ -287,8 +292,6 @@ ps3) overlay_dest="256" overlay_size="256" - rm -f "$object/otheros.bld" - ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ @@ -299,6 +302,8 @@ ps3) skip=$system_reset_overlay seek=$overlay_dest \ count=$overlay_size bs=1 - gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld" + odir="$(dirname "$ofile.bin")" + rm -f "$odir/otheros.bld" + gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld" ;; esac diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c index f0f49d1be3d5..965bfcc9ad2d 100644 --- a/arch/powerpc/kernel/isa-bridge.c +++ b/arch/powerpc/kernel/isa-bridge.c @@ -108,7 +108,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, if (size > 0x10000) size = 0x10000; - printk(KERN_ERR "no ISA IO ranges or unexpected isa range," + printk(KERN_ERR "no ISA IO ranges or unexpected isa range, " "mapping 64k\n"); __ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE, @@ -116,7 +116,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, return; inval_range: - printk(KERN_ERR "no ISA IO ranges or unexpected isa range," + printk(KERN_ERR "no ISA IO ranges or unexpected isa range, " "mapping 64k\n"); __ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE, 0x10000, _PAGE_NO_CACHE|_PAGE_GUARDED); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 2ae3b6f778a3..15ec71a84f78 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -48,9 +48,7 @@ static DEFINE_SPINLOCK(hose_spinlock); /* XXX kill that some day ... */ -int global_phb_number; /* Global phb counter */ - -extern struct list_head hose_list; +static int global_phb_number; /* Global phb counter */ /* * pci_controller(phb) initialized common variables. diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 2de00f870edc..6adb5a1e98bb 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,6 +33,7 @@ #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/debugfs.h> +#include <linux/percpu.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> @@ -57,6 +58,7 @@ #include <asm/mmu.h> #include <asm/lmb.h> #include <asm/xmon.h> +#include <asm/cputhreads.h> #include "setup.h" @@ -327,6 +329,31 @@ void __init check_for_initrd(void) #ifdef CONFIG_SMP +int threads_per_core, threads_shift; +cpumask_t threads_core_mask; + +static void __init cpu_init_thread_core_maps(int tpc) +{ + int i; + + threads_per_core = tpc; + threads_core_mask = CPU_MASK_NONE; + + /* This implementation only supports power of 2 number of threads + * for simplicity and performance + */ + threads_shift = ilog2(tpc); + BUG_ON(tpc != (1 << threads_shift)); + + for (i = 0; i < tpc; i++) + cpu_set(i, threads_core_mask); + + printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n", + tpc, tpc > 1 ? "s" : ""); + printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift); +} + + /** * setup_cpu_maps - initialize the following cpu maps: * cpu_possible_map @@ -350,22 +377,32 @@ void __init smp_setup_cpu_maps(void) { struct device_node *dn = NULL; int cpu = 0; + int nthreads = 1; + + DBG("smp_setup_cpu_maps()\n"); while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { const int *intserv; - int j, len = sizeof(u32), nthreads = 1; + int j, len; + + DBG(" * %s...\n", dn->full_name); intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); - if (intserv) + if (intserv) { nthreads = len / sizeof(int); - else { + DBG(" ibm,ppc-interrupt-server#s -> %d threads\n", + nthreads); + } else { + DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n"); intserv = of_get_property(dn, "reg", NULL); if (!intserv) intserv = &cpu; /* assume logical == phys */ } for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + DBG(" thread %d -> cpu %d (hard id %d)\n", + j, cpu, intserv[j]); cpu_set(cpu, cpu_present_map); set_hard_smp_processor_id(cpu, intserv[j]); cpu_set(cpu, cpu_possible_map); @@ -373,6 +410,12 @@ void __init smp_setup_cpu_maps(void) } } + /* If no SMT supported, nthreads is forced to 1 */ + if (!cpu_has_feature(CPU_FTR_SMT)) { + DBG(" SMT disabled ! nthreads forced to 1\n"); + nthreads = 1; + } + #ifdef CONFIG_PPC64 /* * On pSeries LPAR, we need to know how many cpus @@ -395,7 +438,7 @@ void __init smp_setup_cpu_maps(void) /* Double maxcpus for processors which have SMT capability */ if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; + maxcpus *= nthreads; if (maxcpus > NR_CPUS) { printk(KERN_WARNING @@ -412,9 +455,16 @@ void __init smp_setup_cpu_maps(void) out: of_node_put(dn); } - vdso_data->processorCount = num_present_cpus(); #endif /* CONFIG_PPC64 */ + + /* Initialize CPU <=> thread mapping/ + * + * WARNING: We assume that the number of threads is the same for + * every CPU in the system. If that is not the case, then some code + * here will have to be reworked + */ + cpu_init_thread_core_maps(nthreads); } /* @@ -424,17 +474,19 @@ void __init smp_setup_cpu_maps(void) */ void __init smp_setup_cpu_sibling_map(void) { -#if defined(CONFIG_PPC64) - int cpu; +#ifdef CONFIG_PPC64 + int i, cpu, base; - /* - * Do the sibling map; assume only two threads per processor. - */ for_each_possible_cpu(cpu) { - cpu_set(cpu, per_cpu(cpu_sibling_map, cpu)); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, per_cpu(cpu_sibling_map, cpu)); + DBG("Sibling map for CPU %d:", cpu); + base = cpu_first_thread_in_core(cpu); + for (i = 0; i < threads_per_core; i++) { + cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); + DBG(" %d", base + i); + } + DBG("\n"); } + #endif /* CONFIG_PPC64 */ } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 8135da06e0a4..10dda224a361 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -189,7 +189,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, return SIGSEGV; /* in_atomic() in user mode is really bad, as is current->mm == NULL. */ - printk(KERN_EMERG "Page fault in user mode with" + printk(KERN_EMERG "Page fault in user mode with " "in_atomic() = %d mm = %p\n", in_atomic(), mm); printk(KERN_EMERG "NIP = %lx MSR = %lx\n", regs->nip, regs->msr); diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index d35eda80e9e6..ba645c2b63f6 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -120,7 +120,7 @@ void __init mpc8xx_calibrate_decr(void) ppc_tb_freq /= 16; ppc_proc_freq = 50000000; if (!get_freq("clock-frequency", &ppc_proc_freq)) - printk(KERN_ERR "WARNING: Estimating processor frequency" + printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index e4438456c867..efb3964457b1 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -42,6 +42,7 @@ #include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> +#include <asm/cputhreads.h> #include "interrupt.h" #include <asm/udbg.h> @@ -182,7 +183,7 @@ static int smp_cell_cpu_bootable(unsigned int nr) */ if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT) && - !smt_enabled_at_boot && nr % 2 != 0) + !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0) return 0; return 1; diff --git a/arch/powerpc/platforms/celleb/io-workarounds.c b/arch/powerpc/platforms/celleb/io-workarounds.c index 2b912140bcbb..32b9cecfda15 100644 --- a/arch/powerpc/platforms/celleb/io-workarounds.c +++ b/arch/powerpc/platforms/celleb/io-workarounds.c @@ -256,7 +256,7 @@ int __init celleb_pci_workaround_init(void) celleb_dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!celleb_dummy_page_va) { - printk(KERN_ERR "Celleb: dummy read disabled." + printk(KERN_ERR "Celleb: dummy read disabled. " "Alloc celleb_dummy_page_va failed\n"); return 1; } diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c index 6bc32fda7a6b..13ec4a606b96 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/celleb/pci.c @@ -138,8 +138,6 @@ static void celleb_config_read_fake(unsigned char *config, int where, *val = celleb_fake_config_readl(p); break; } - - return; } static void celleb_config_write_fake(unsigned char *config, int where, @@ -158,7 +156,6 @@ static void celleb_config_write_fake(unsigned char *config, int where, celleb_fake_config_writel(val, p); break; } - return; } static int celleb_fake_pci_read_config(struct pci_bus *bus, @@ -351,6 +348,10 @@ static int __init celleb_setup_fake_pci_device(struct device_node *node, wi1 = of_get_property(node, "vendor-id", NULL); wi2 = of_get_property(node, "class-code", NULL); wi3 = of_get_property(node, "revision-id", NULL); + if (!wi0 || !wi1 || !wi2 || !wi3) { + printk(KERN_ERR "PCI: Missing device tree properties.\n"); + goto error; + } celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff); celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff); @@ -372,6 +373,10 @@ static int __init celleb_setup_fake_pci_device(struct device_node *node, celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr); li = of_get_property(node, "interrupts", &rlen); + if (!li) { + printk(KERN_ERR "PCI: interrupts not found.\n"); + goto error; + } val = li[0]; celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1); celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val); diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c index 9d076426676c..a3c7cfbcb323 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -95,7 +95,7 @@ void __init epci_workaround_init(struct pci_controller *hose) private->dummy_page_da = dma_map_single(hose->parent, celleb_dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); if (private->dummy_page_da == DMA_ERROR_CODE) { - printk(KERN_ERR "EPCI: dummy read disabled." + printk(KERN_ERR "EPCI: dummy read disabled. " "Map dummy page failed.\n"); return; } diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index b6de2b5223dd..ce91787f3c7c 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -26,6 +26,7 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_core.h> +#include <linux/of_platform.h> #include <asm/system.h> #include <asm/time.h> @@ -39,7 +40,6 @@ #include <asm/tsi108_irq.h> #include <asm/tsi108_pci.h> #include <asm/mpic.h> -#include <asm/of_platform.h> #undef DEBUG diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index da87162000f0..a74d1e1966dd 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -87,7 +87,7 @@ static DEFINE_SPINLOCK(iomm_table_lock); * - CurrentIndex is incremented to keep track of the last entry. * - Builds the resource entry for allocated BARs. */ -static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) +static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) { struct resource *bar_res = &dev->resource[bar_num]; long bar_size = pci_resource_len(dev, bar_num); @@ -130,7 +130,7 @@ static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) * - Loops through The Bar resources(0 - 5) including the ROM * is resource(6). */ -static void allocate_device_bars(struct pci_dev *dev) +static void __init allocate_device_bars(struct pci_dev *dev) { int bar_num; diff --git a/arch/powerpc/platforms/iseries/pci.h b/arch/powerpc/platforms/iseries/pci.h index 33a8489fde54..730986bc917a 100644 --- a/arch/powerpc/platforms/iseries/pci.h +++ b/arch/powerpc/platforms/iseries/pci.h @@ -59,5 +59,10 @@ static inline u64 iseries_ds_addr(struct device_node *node) } extern void iSeries_Device_Information(struct pci_dev*, int); +#ifdef CONFIG_PCI +extern void iSeries_pci_final_fixup(void); +#else +static void iSeries_pci_final_fixup(void) { } +#endif #endif /* _PLATFORMS_ISERIES_PCI_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 0877a8834110..2175a71800d5 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -63,6 +63,7 @@ #include "main_store.h" #include "call_sm.h" #include "call_hpt.h" +#include "pci.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -74,11 +75,6 @@ static unsigned long build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); -#ifdef CONFIG_PCI -extern void iSeries_pci_final_fixup(void); -#else -static void iSeries_pci_final_fixup(void) { } -#endif struct MemoryBlock { @@ -112,13 +108,13 @@ static unsigned long iSeries_process_Condor_mainstore_vpd( * correctly. */ mb_array[0].logicalStart = 0; - mb_array[0].logicalEnd = 0x100000000; + mb_array[0].logicalEnd = 0x100000000UL; mb_array[0].absStart = 0; - mb_array[0].absEnd = 0x100000000; + mb_array[0].absEnd = 0x100000000UL; if (holeSize) { numMemoryBlocks = 2; - holeStart = holeStart & 0x000fffffffffffff; + holeStart = holeStart & 0x000fffffffffffffUL; holeStart = addr_to_chunk(holeStart); holeFirstChunk = holeStart; holeSize = addr_to_chunk(holeSize); @@ -128,9 +124,9 @@ static unsigned long iSeries_process_Condor_mainstore_vpd( mb_array[0].logicalEnd = holeFirstChunk; mb_array[0].absEnd = holeFirstChunk; mb_array[1].logicalStart = holeFirstChunk; - mb_array[1].logicalEnd = 0x100000000 - holeSizeChunks; + mb_array[1].logicalEnd = 0x100000000UL - holeSizeChunks; mb_array[1].absStart = holeFirstChunk + holeSizeChunks; - mb_array[1].absEnd = 0x100000000; + mb_array[1].absEnd = 0x100000000UL; } return numMemoryBlocks; } @@ -234,9 +230,9 @@ static unsigned long iSeries_process_Regatta_mainstore_vpd( mb_array[i].logicalEnd, mb_array[i].absStart, mb_array[i].absEnd); mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart & - 0x000fffffffffffff); + 0x000fffffffffffffUL); mb_array[i].absEnd = addr_to_chunk(mb_array[i].absEnd & - 0x000fffffffffffff); + 0x000fffffffffffffUL); mb_array[i].logicalStart = addr_to_chunk(mb_array[i].logicalStart); mb_array[i].logicalEnd = addr_to_chunk(mb_array[i].logicalEnd); @@ -320,7 +316,7 @@ struct mschunks_map mschunks_map = { }; EXPORT_SYMBOL(mschunks_map); -void mschunks_alloc(unsigned long num_chunks) +static void mschunks_alloc(unsigned long num_chunks) { klimit = _ALIGN(klimit, sizeof(u32)); mschunks_map.mapping = (u32 *)klimit; diff --git a/arch/powerpc/platforms/iseries/setup.h b/arch/powerpc/platforms/iseries/setup.h index 0a47ac53c959..729754bbb018 100644 --- a/arch/powerpc/platforms/iseries/setup.h +++ b/arch/powerpc/platforms/iseries/setup.h @@ -17,6 +17,7 @@ #ifndef __ISERIES_SETUP_H__ #define __ISERIES_SETUP_H__ +extern void *iSeries_early_setup(void); extern unsigned long iSeries_get_boot_time(void); extern int iSeries_set_rtc_time(struct rtc_time *tm); extern void iSeries_get_rtc_time(struct rtc_time *tm); diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 735e1536cbfc..2f4dd6e4aac1 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -17,7 +17,7 @@ config PPC_PASEMI_IOMMU bool "PA Semi IOMMU support" depends on PPC_PASEMI help - IOMMU support for PA6T-1682M + IOMMU support for PA Semi PWRficient config PPC_PASEMI_IOMMU_DMA_FORCE bool "Force DMA engine to use IOMMU" diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index 1cfb8b0c8fec..58556b028a4c 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -32,6 +32,7 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/time.h> +#include <asm/smp.h> #define SDCASR_REG 0x0100 #define SDCASR_REG_STRIDE 0x1000 @@ -124,6 +125,11 @@ static void set_astate(int cpu, unsigned int astate) local_irq_restore(flags); } +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + void restore_astate(int cpu) { set_astate(cpu, current_astate); @@ -147,7 +153,10 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) if (!cpu) goto out; - dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc"); + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); if (!dn) goto out; err = of_address_to_resource(dn, 0, &res); @@ -160,7 +169,10 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) goto out; } - dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo"); + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); if (!dn) { err = -ENODEV; goto out_unmap_sdcasr; @@ -292,7 +304,8 @@ static struct cpufreq_driver pas_cpufreq_driver = { static int __init pas_cpufreq_init(void) { - if (!machine_is_compatible("PA6T-1682M")) + if (!machine_is_compatible("PA6T-1682M") && + !machine_is_compatible("pasemi,pwrficient")) return -ENODEV; return cpufreq_register_driver(&pas_cpufreq_driver); diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index dae9f658122e..b46542990cf8 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -30,7 +30,7 @@ #include <linux/interrupt.h> #include <linux/phy.h> #include <linux/platform_device.h> -#include <asm/of_platform.h> +#include <linux/of_platform.h> #define DELAY 1 @@ -218,45 +218,27 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev, const struct of_device_id *match) { struct device *dev = &ofdev->dev; - struct device_node *np = ofdev->node; - struct device_node *gpio_np; + struct device_node *phy_dn, *np = ofdev->node; struct mii_bus *new_bus; - struct resource res; struct gpio_priv *priv; const unsigned int *prop; - int err = 0; + int err; int i; - gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio"); - - if (!gpio_np) - return -ENODEV; - - err = of_address_to_resource(gpio_np, 0, &res); - of_node_put(gpio_np); - - if (err) - return -EINVAL; - - if (!gpio_regs) - gpio_regs = ioremap(res.start, 0x100); - - if (!gpio_regs) - return -EPERM; - + err = -ENOMEM; priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; + if (!priv) + goto out; new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); - if (new_bus == NULL) - return -ENOMEM; + if (!new_bus) + goto out_free_priv; - new_bus->name = "pasemi gpio mdio bus", - new_bus->read = &gpio_mdio_read, - new_bus->write = &gpio_mdio_write, - new_bus->reset = &gpio_mdio_reset, + new_bus->name = "pasemi gpio mdio bus"; + new_bus->read = &gpio_mdio_read; + new_bus->write = &gpio_mdio_write; + new_bus->reset = &gpio_mdio_reset; prop = of_get_property(np, "reg", NULL); new_bus->id = *prop; @@ -265,9 +247,24 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev, new_bus->phy_mask = 0; new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); - for(i = 0; i < PHY_MAX_ADDR; ++i) - new_bus->irq[i] = irq_create_mapping(NULL, 10); + if (!new_bus->irq) + goto out_free_bus; + + for (i = 0; i < PHY_MAX_ADDR; i++) + new_bus->irq[i] = NO_IRQ; + + for (phy_dn = of_get_next_child(np, NULL); + phy_dn != NULL; + phy_dn = of_get_next_child(np, phy_dn)) { + const unsigned int *ip, *regp; + + ip = of_get_property(phy_dn, "interrupts", NULL); + regp = of_get_property(phy_dn, "reg", NULL); + if (!ip || !regp || *regp >= PHY_MAX_ADDR) + continue; + new_bus->irq[*regp] = irq_create_mapping(NULL, *ip); + } prop = of_get_property(np, "mdc-pin", NULL); priv->mdc_pin = *prop; @@ -280,17 +277,21 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev, err = mdiobus_register(new_bus); - if (0 != err) { + if (err != 0) { printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n", new_bus->name, err); - goto bus_register_fail; + goto out_free_irq; } return 0; -bus_register_fail: +out_free_irq: + kfree(new_bus->irq); +out_free_bus: kfree(new_bus); - +out_free_priv: + kfree(priv); +out: return err; } @@ -317,6 +318,7 @@ static struct of_device_id gpio_mdio_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, gpio_mdio_match); static struct of_platform_driver gpio_mdio_driver = { @@ -330,12 +332,32 @@ static struct of_platform_driver gpio_mdio_driver = int gpio_mdio_init(void) { + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "1682m-gpio"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gpio"); + if (!np) + return -ENODEV; + gpio_regs = of_iomap(np, 0); + of_node_put(np); + + if (!gpio_regs) + return -ENODEV; + return of_register_platform_driver(&gpio_mdio_driver); } +module_init(gpio_mdio_init); void gpio_mdio_exit(void) { of_unregister_platform_driver(&gpio_mdio_driver); + if (gpio_regs) + iounmap(gpio_regs); } -device_initcall(gpio_mdio_init); +module_exit(gpio_mdio_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Olof Johansson <olof@lixom.net>"); +MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards"); diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 516acabb4e96..c96127b029b6 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -16,8 +16,14 @@ extern void idle_doze(void); /* Restore astate to last set */ #ifdef CONFIG_PPC_PASEMI_CPUFREQ +extern int check_astate(void); extern void restore_astate(int cpu); #else +static inline int check_astate(void) +{ + /* Always return >0 so we never power save */ + return 1; +} static inline void restore_astate(int cpu) { } diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S index 6d0fba6aab17..56f45adcd089 100644 --- a/arch/powerpc/platforms/pasemi/powersave.S +++ b/arch/powerpc/platforms/pasemi/powersave.S @@ -62,7 +62,16 @@ sleep_common: mflr r0 std r0, 16(r1) stdu r1,-64(r1) +#ifdef CONFIG_PPC_PASEMI_CPUFREQ + std r3, 48(r1) + /* Only do power savings when in astate 0 */ + bl .check_astate + cmpwi r3,0 + bne 1f + + ld r3, 48(r1) +#endif LOAD_REG_IMMEDIATE(r6,MSR_DR|MSR_IR|MSR_ME|MSR_EE) mfmsr r4 andc r5,r4,r6 @@ -73,7 +82,7 @@ sleep_common: mtmsrd r4,0 - addi r1,r1,64 +1: addi r1,r1,64 ld r0,16(r1) mtlr r0 blr diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 3d62060498b4..5748194a667f 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/console.h> #include <linux/pci.h> +#include <linux/of_platform.h> #include <asm/prom.h> #include <asm/system.h> @@ -35,7 +36,6 @@ #include <asm/mpic.h> #include <asm/smp.h> #include <asm/time.h> -#include <asm/of_platform.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> @@ -43,6 +43,10 @@ #include "pasemi.h" +#if !defined(CONFIG_SMP) +static void smp_send_stop(void) {} +#endif + /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; @@ -60,6 +64,9 @@ static int num_mce_regs; static void pas_restart(char *cmd) { + /* Need to put others cpu in hold loop so they're not sleeping */ + smp_send_stop(); + udelay(10000); printk("Restarting...\n"); while (1) out_le32(reset_reg, 0x6000000); @@ -362,8 +369,12 @@ static inline void pasemi_pcmcia_init(void) static struct of_device_id pasemi_bus_ids[] = { + /* Unfortunately needed for legacy firmwares */ { .type = "localbus", }, { .type = "sdc", }, + /* These are the proper entries, which newer firmware uses */ + { .compatible = "pasemi,localbus", }, + { .compatible = "pasemi,sdc", }, {}, }; @@ -389,7 +400,8 @@ static int __init pas_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (!of_flat_dt_is_compatible(root, "PA6T-1682M")) + if (!of_flat_dt_is_compatible(root, "PA6T-1682M") && + !of_flat_dt_is_compatible(root, "pasemi,pwrficient")) return 0; hpte_init_native(); @@ -400,7 +412,7 @@ static int __init pas_probe(void) } define_machine(pasemi) { - .name = "PA Semi PA6T-1682M", + .name = "PA Semi PWRficient", .probe = pas_probe, .setup_arch = pas_setup_arch, .init_early = pas_init_early, diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 02c533096627..3acb59d5cdf5 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -51,6 +51,8 @@ #include <linux/root_dev.h> #include <linux/bitops.h> #include <linux/suspend.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #include <asm/reg.h> #include <asm/sections.h> @@ -68,8 +70,6 @@ #include <asm/btext.h> #include <asm/pmac_feature.h> #include <asm/time.h> -#include <asm/of_device.h> -#include <asm/of_platform.h> #include <asm/mmu_context.h> #include <asm/iommu.h> #include <asm/smu.h> diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index bf9da56942e8..bbbefd64ab59 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -84,12 +84,14 @@ long __init pmac_time_init(void) return delta; } +#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) static void to_rtc_time(unsigned long now, struct rtc_time *tm) { to_tm(now, tm); tm->tm_year -= 1900; tm->tm_mon -= 1; } +#endif static unsigned long from_rtc_time(struct rtc_time *tm) { diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index fb3d636e088b..aa14a8559edb 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -480,6 +480,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) no_dn++; return 0; } + dn = find_device_pe(dn); pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ @@ -545,7 +546,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) /* Note that config-io to empty slots may fail; * they are empty when they don't have children. */ - if ((rets[0] == 5) && (dn->child == NULL)) { + if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) { false_positives++; pdn->eeh_false_positives ++; rc = 0; diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 57e025e84ab4..06b89b56d0e9 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -354,13 +354,6 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) goto excess_failures; - /* Get the current PCI slot state. */ - rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000); - if (rc < 0) { - printk(KERN_WARNING "EEH: Permanent failure\n"); - goto hard_fail; - } - printk(KERN_WARNING "EEH: This PCI device has failed %d times in the last hour:\n", frozen_pdn->eeh_freeze_count); @@ -376,6 +369,14 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) */ pci_walk_bus(frozen_bus, eeh_report_error, &result); + /* Get the current PCI slot state. This can take a long time, + * sometimes over 3 seconds for certain systems. */ + rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000); + if (rc < 0) { + printk(KERN_WARNING "EEH: Permanent failure\n"); + goto hard_fail; + } + /* Since rtas may enable MMIO when posting the error log, * don't post the error log until after all dev drivers * have been informed. diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index d003c80fa31d..d8680b589dc9 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -8,11 +8,6 @@ static inline long poll_pending(void) return plpar_hcall_norets(H_POLL_PENDING); } -static inline long prod_processor(void) -{ - return plpar_hcall_norets(H_PROD); -} - static inline long cede_processor(void) { return plpar_hcall_norets(H_CEDE); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 116305b22a2b..ea4c65917a64 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -46,6 +46,7 @@ #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> #include <asm/vdso_datapage.h> +#include <asm/cputhreads.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -202,7 +203,7 @@ static int smp_pSeries_cpu_bootable(unsigned int nr) */ if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT) && - !smt_enabled_at_boot && nr % 2 != 0) + !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0) return 0; return 1; diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 5eaf3e3f4b8b..d359d6e92975 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -42,8 +42,9 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> -#include <asm/of_device.h> -#include <asm/of_platform.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> + #include <asm/page.h> #include <asm/prom.h> diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 33df4c347ca7..87e58e09b500 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -222,7 +222,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; } - printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx." + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", (unsigned long long)rsrc.start, hose->first_busno, hose->last_busno); diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index 20edd1e94eff..c858749263e0 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -28,9 +28,9 @@ #include <linux/completion.h> #include <linux/spinlock.h> #include <linux/workqueue.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> -#include <asm/of_device.h> -#include <asm/of_platform.h> #include <asm/io.h> #include <asm/pmi.h> #include <asm/prom.h> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 121b04d165d1..381d467cf55b 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -153,6 +153,10 @@ static const char *getvecname(unsigned long vec); static int do_spu_cmd(void); +#ifdef CONFIG_44x +static void dump_tlb_44x(void); +#endif + int xmon_no_auto_backtrace; extern void xmon_enter(void); @@ -231,6 +235,9 @@ Commands:\n\ #ifdef CONFIG_PPC_STD_MMU_32 " u dump segment registers\n" #endif +#ifdef CONFIG_44x +" u dump TLB\n" +#endif " ? help\n" " zr reboot\n\ zh halt\n" @@ -856,6 +863,11 @@ cmds(struct pt_regs *excp) dump_segments(); break; #endif +#ifdef CONFIG_4xx + case 'u': + dump_tlb_44x(); + break; +#endif default: printf("Unrecognized command: "); do { @@ -2581,6 +2593,32 @@ void dump_segments(void) } #endif +#ifdef CONFIG_44x +static void dump_tlb_44x(void) +{ + int i; + + for (i = 0; i < PPC44x_TLB_SIZE; i++) { + unsigned long w0,w1,w2; + asm volatile("tlbre %0,%1,0" : "=r" (w0) : "r" (i)); + asm volatile("tlbre %0,%1,1" : "=r" (w1) : "r" (i)); + asm volatile("tlbre %0,%1,2" : "=r" (w2) : "r" (i)); + printf("[%02x] %08x %08x %08x ", i, w0, w1, w2); + if (w0 & PPC44x_TLB_VALID) { + printf("V %08x -> %01x%08x %c%c%c%c%c", + w0 & PPC44x_TLB_EPN_MASK, + w1 & PPC44x_TLB_ERPN_MASK, + w1 & PPC44x_TLB_RPN_MASK, + (w2 & PPC44x_TLB_W) ? 'W' : 'w', + (w2 & PPC44x_TLB_I) ? 'I' : 'i', + (w2 & PPC44x_TLB_M) ? 'M' : 'm', + (w2 & PPC44x_TLB_G) ? 'G' : 'g', + (w2 & PPC44x_TLB_E) ? 'E' : 'e'); + } + printf("\n"); + } +} +#endif /* CONFIG_44x */ void xmon_init(int enable) { #ifdef CONFIG_PPC_ISERIES diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index 976270d537c1..c1f77e1d368e 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -336,7 +336,7 @@ ev64260_early_serial_map(void) #endif if (early_serial_setup(&port) != 0) - printk(KERN_WARNING "Early serial init of port 0" + printk(KERN_WARNING "Early serial init of port 0 " "failed\n"); first_time = 0; @@ -388,7 +388,7 @@ ev64260_setup_arch(void) ev64260_early_serial_map(); #endif - printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc." + printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. " "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE); if (ppc_md.progress) diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 2d7cd486e025..6bbd4fa50f3b 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -98,7 +98,7 @@ config HW_RANDOM_PASEMI default HW_RANDOM ---help--- This driver provides kernel-side support for the Random Number - Generator hardware found on PA6T-1682M processor. + Generator hardware found on PA Semi PWRficient SoCs. To compile this driver as a module, choose M here: the module will be called pasemi-rng. diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c index fa6040b6c8f2..24ae3073991f 100644 --- a/drivers/char/hw_random/pasemi-rng.c +++ b/drivers/char/hw_random/pasemi-rng.c @@ -126,10 +126,9 @@ static int __devexit rng_remove(struct of_device *dev) } static struct of_device_id rng_match[] = { - { - .compatible = "1682m-rng", - }, - {}, + { .compatible = "1682m-rng", }, + { .compatible = "pasemi,pwrficient-rng", }, + { }, }; static struct of_platform_driver rng_driver = { diff --git a/drivers/edac/pasemi_edac.c b/drivers/edac/pasemi_edac.c index 9007d0677220..90320917be28 100644 --- a/drivers/edac/pasemi_edac.c +++ b/drivers/edac/pasemi_edac.c @@ -225,7 +225,7 @@ static int __devinit pasemi_edac_probe(struct pci_dev *pdev, EDAC_FLAG_NONE; mci->mod_name = MODULE_NAME; mci->dev_name = pci_name(pdev); - mci->ctl_name = "pasemi,1682m-mc"; + mci->ctl_name = "pasemi,pwrficient-mc"; mci->edac_check = pasemi_edac_check; mci->ctl_page_to_phys = NULL; pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub); @@ -297,4 +297,4 @@ module_exit(pasemi_edac_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>"); -MODULE_DESCRIPTION("MC support for PA Semi PA6T-1682M memory controller"); +MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller"); diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index dc741d3a4531..35e1f22089d6 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -33,7 +33,6 @@ #include <linux/adb.h> #include <linux/pmu.h> #include <linux/cuda.h> -#include <linux/smp_lock.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/pm.h> @@ -65,9 +64,7 @@ #include "via-pmu-event.h" /* Some compile options */ -#undef SUSPEND_USES_PMU #define DEBUG_SLEEP -#undef HACKED_PCI_SAVE /* Misc minor number allocated for /dev/pmu */ #define PMU_MINOR 154 @@ -1256,9 +1253,7 @@ void pmu_suspend(void) { unsigned long flags; -#ifdef SUSPEND_USES_PMU - struct adb_request *req; -#endif + if (!via) return; @@ -1276,17 +1271,10 @@ pmu_suspend(void) via_pmu_interrupt(0, NULL); spin_lock_irqsave(&pmu_lock, flags); if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) { -#ifdef SUSPEND_USES_PMU - pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); - spin_unlock_irqrestore(&pmu_lock, flags); - while(!req.complete) - pmu_poll(); -#else /* SUSPEND_USES_PMU */ if (gpio_irq >= 0) disable_irq_nosync(gpio_irq); out_8(&via[IER], CB1_INT | IER_CLR); spin_unlock_irqrestore(&pmu_lock, flags); -#endif /* SUSPEND_USES_PMU */ break; } } while (1); @@ -1307,18 +1295,11 @@ pmu_resume(void) return; } adb_int_pending = 1; -#ifdef SUSPEND_USES_PMU - pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); - spin_unlock_irqrestore(&pmu_lock, flags); - while(!req.complete) - pmu_poll(); -#else /* SUSPEND_USES_PMU */ if (gpio_irq >= 0) enable_irq(gpio_irq); out_8(&via[IER], CB1_INT | IER_SET); spin_unlock_irqrestore(&pmu_lock, flags); pmu_poll(); -#endif /* SUSPEND_USES_PMU */ } /* Interrupt data could be the result data from an ADB cmd */ @@ -1804,14 +1785,10 @@ static void broadcast_wake(void) * PCI devices which may get powered off when we sleep. */ static struct pci_save { -#ifndef HACKED_PCI_SAVE u16 command; u16 cache_lat; u16 intr; u32 rom_address; -#else - u32 config[16]; -#endif } *pbook_pci_saves; static int pbook_npci_saves; @@ -1857,16 +1834,10 @@ pbook_pci_save(void) pci_dev_put(pd); return; } -#ifndef HACKED_PCI_SAVE pci_read_config_word(pd, PCI_COMMAND, &ps->command); pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat); pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr); pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address); -#else - int i; - for (i=1;i<16;i++) - pci_read_config_dword(pd, i<<4, &ps->config[i]); -#endif ++ps; } } @@ -1885,17 +1856,6 @@ pbook_pci_restore(void) int j; while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { -#ifdef HACKED_PCI_SAVE - int i; - if (npci-- == 0) { - pci_dev_put(pd); - return; - } - ps++; - for (i=2;i<16;i++) - pci_write_config_dword(pd, i<<4, ps->config[i]); - pci_write_config_dword(pd, 4, ps->config[1]); -#else if (npci-- == 0) return; ps++; @@ -1919,7 +1879,6 @@ pbook_pci_restore(void) pci_write_config_word(pd, PCI_COMMAND, ps->command); break; } -#endif } } @@ -2547,7 +2506,6 @@ pmu_release(struct inode *inode, struct file *file) struct pmu_private *pp = file->private_data; unsigned long flags; - lock_kernel(); if (pp != 0) { file->private_data = NULL; spin_lock_irqsave(&all_pvt_lock, flags); @@ -2561,7 +2519,6 @@ pmu_release(struct inode *inode, struct file *file) kfree(pp); } - unlock_kernel(); return 0; } diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h new file mode 100644 index 000000000000..8485c28b5f47 --- /dev/null +++ b/include/asm-powerpc/cputhreads.h @@ -0,0 +1,71 @@ +#ifndef _ASM_POWERPC_CPUTHREADS_H +#define _ASM_POWERPC_CPUTHREADS_H + +#include <linux/cpumask.h> + +/* + * Mapping of threads to cores + */ + +#ifdef CONFIG_SMP +extern int threads_per_core; +extern int threads_shift; +extern cpumask_t threads_core_mask; +#else +#define threads_per_core 1 +#define threads_shift 0 +#define threads_core_mask (CPU_MASK_CPU0) +#endif + +/* cpu_thread_mask_to_cores - Return a cpumask of one per cores + * hit by the argument + * + * @threads: a cpumask of threads + * + * This function returns a cpumask which will have one "cpu" (or thread) + * bit set for each core that has at least one thread set in the argument. + * + * This can typically be used for things like IPI for tlb invalidations + * since those need to be done only once per core/TLB + */ +static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) +{ + cpumask_t tmp, res; + int i; + + res = CPU_MASK_NONE; + for (i = 0; i < NR_CPUS; i += threads_per_core) { + cpus_shift_right(tmp, threads_core_mask, i); + if (cpus_intersects(threads, tmp)) + cpu_set(i, res); + } + return res; +} + +static inline int cpu_nr_cores(void) +{ + return NR_CPUS >> threads_shift; +} + +static inline cpumask_t cpu_online_cores_map(void) +{ + return cpu_thread_mask_to_cores(cpu_online_map); +} + +static inline int cpu_thread_to_core(int cpu) +{ + return cpu >> threads_shift; +} + +static inline int cpu_thread_in_core(int cpu) +{ + return cpu & (threads_per_core - 1); +} + +static inline int cpu_first_thread_in_core(int cpu) +{ + return cpu & ~(threads_per_core - 1); +} + +#endif /* _ASM_POWERPC_CPUTHREADS_H */ + diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index b847aa10074b..fda5e3d1f62a 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -22,7 +22,6 @@ extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); extern struct list_head hose_list; -extern int global_phb_number; extern void find_and_init_phbs(void); |