diff options
| -rw-r--r-- | Documentation/input/multi-touch-protocol.txt | 48 | ||||
| -rw-r--r-- | drivers/input/input.c | 1 | ||||
| -rw-r--r-- | drivers/input/misc/winbond-cir.c | 2 | ||||
| -rw-r--r-- | drivers/input/mouse/lifebook.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ad7879.c | 197 | ||||
| -rw-r--r-- | include/linux/input.h | 1 | ||||
| -rw-r--r-- | include/linux/spi/ad7879.h | 12 |
7 files changed, 198 insertions, 69 deletions
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index a12ea3b586e6..8490480ce432 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -27,12 +27,30 @@ set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The -minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and -ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the -device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size -of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The -ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which +allows for multiple fingers to be tracked. If the device supports it, the +ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size +of the contact area and approaching finger, respectively. + +The TOUCH and WIDTH parameters have a geometrical interpretation; imagine +looking through a window at someone gently holding a finger against the +glass. You will see two regions, one inner region consisting of the part +of the finger actually touching the glass, and one outer region formed by +the perimeter of the finger. The diameter of the inner region is the +ABS_MT_TOUCH_MAJOR, the diameter of the outer region is +ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder +against the glass. The inner region will increase, and in general, the +ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than +unity, is related to the finger pressure. For pressure-based devices, +ABS_MT_PRESSURE may be used to provide the pressure on the contact area +instead. + +In addition to the MAJOR parameters, the oval shape of the finger can be +described by adding the MINOR parameters, such that MAJOR and MINOR are the +major and minor axis of an ellipse. Finally, the orientation of the oval +shape can be describe with the ORIENTATION parameter. + +The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen or something else. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices @@ -42,11 +60,9 @@ report finger tracking from hardware [5]. Here is what a minimal event sequence for a two-finger touch would look like: - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT - ABS_MT_TOUCH_MAJOR ABS_MT_POSITION_X ABS_MT_POSITION_Y SYN_MT_REPORT @@ -87,6 +103,12 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates the notion of pressure. The fingers of the hand and the palm all have different characteristic widths [1]. +ABS_MT_PRESSURE + +The pressure, in arbitrary units, on the contact area. May be used instead +of TOUCH and WIDTH for pressure-based devices or any device with a spatial +signal intensity distribution. + ABS_MT_ORIENTATION The orientation of the ellipse. The value should describe a signed quarter @@ -170,6 +192,16 @@ There are a few devices that support trackingID in hardware. User space can make use of these native identifiers to reduce bandwidth and cpu usage. +Gestures +-------- + +In the specific application of creating gesture events, the TOUCH and WIDTH +parameters can be used to, e.g., approximate finger pressure or distinguish +between index finger and thumb. With the addition of the MINOR parameters, +one can also distinguish between a sweeping finger and a pointing finger, +and with ORIENTATION, one can detect twisting of fingers. + + Notes ----- diff --git a/drivers/input/input.c b/drivers/input/input.c index 30b503b8d67b..86cb2d2196ff 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -46,6 +46,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, ABS_MT_TRACKING_ID, + ABS_MT_PRESSURE, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c index 33309fe44e20..c8f5a9a3fa14 100644 --- a/drivers/input/misc/winbond-cir.c +++ b/drivers/input/misc/winbond-cir.c @@ -768,7 +768,7 @@ wbcir_parse_rc6(struct device *dev, struct wbcir_data *data) return; } - dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " + dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X " "toggle %u mode %u scan 0x%08X\n", address, command, diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 6d7aa10d10f0..7c1d7d420ae3 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -53,6 +53,12 @@ static const struct dmi_system_id __initconst lifebook_dmi_table[] = { { /* LifeBook B */ .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"), + }, + }, + { + /* LifeBook B */ + .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"), }, }, diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index c21e6d3a8844..794d070c6900 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -47,6 +47,7 @@ #include <linux/workqueue.h> #include <linux/spi/spi.h> #include <linux/i2c.h> +#include <linux/gpio.h> #include <linux/spi/ad7879.h> @@ -132,7 +133,9 @@ struct ad7879 { struct input_dev *input; struct work_struct work; struct timer_list timer; - +#ifdef CONFIG_GPIOLIB + struct gpio_chip gc; +#endif struct mutex mutex; unsigned disabled:1; /* P: mutex */ @@ -150,11 +153,9 @@ struct ad7879 { u8 median; u16 x_plate_ohms; u16 pressure_max; - u16 gpio_init; u16 cmd_crtl1; u16 cmd_crtl2; u16 cmd_crtl3; - unsigned gpio:1; }; static int ad7879_read(bus_device *, u8); @@ -237,24 +238,6 @@ static irqreturn_t ad7879_irq(int irq, void *handle) static void ad7879_setup(struct ad7879 *ts) { - ts->cmd_crtl3 = AD7879_YPLUS_BIT | - AD7879_XPLUS_BIT | - AD7879_Z2_BIT | - AD7879_Z1_BIT | - AD7879_TEMPMASK_BIT | - AD7879_AUXVBATMASK_BIT | - AD7879_GPIOALERTMASK_BIT; - - ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | - AD7879_AVG(ts->averaging) | - AD7879_MFS(ts->median) | - AD7879_FCD(ts->first_conversion_delay) | - ts->gpio_init; - - ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | - AD7879_ACQ(ts->acquisition_time) | - AD7879_TMR(ts->pen_down_acc_interval); - ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); @@ -324,48 +307,132 @@ static ssize_t ad7879_disable_store(struct device *dev, static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); -static ssize_t ad7879_gpio_show(struct device *dev, - struct device_attribute *attr, char *buf) +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +#ifdef CONFIG_GPIOLIB +static int ad7879_gpio_direction_input(struct gpio_chip *chip, + unsigned gpio) { - struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - return sprintf(buf, "%u\n", ts->gpio); + mutex_lock(&ts->mutex); + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL; + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; } -static ssize_t ad7879_gpio_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ad7879_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int level) { - struct ad7879 *ts = dev_get_drvdata(dev); - unsigned long val; - int error; + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + int err; - error = strict_strtoul(buf, 10, &val); - if (error) - return error; + mutex_lock(&ts->mutex); + ts->cmd_crtl2 &= ~AD7879_GPIODIR; + ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL; + if (level) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; + + err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); + + return err; +} + +static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); + u16 val; mutex_lock(&ts->mutex); - ts->gpio = !!val; - error = ad7879_write(ts->bus, AD7879_REG_CTRL2, - ts->gpio ? - ts->cmd_crtl2 & ~AD7879_GPIO_DATA : - ts->cmd_crtl2 | AD7879_GPIO_DATA); + val = ad7879_read(ts->bus, AD7879_REG_CTRL2); mutex_unlock(&ts->mutex); - return error ? : count; + return !!(val & AD7879_GPIO_DATA); } -static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); +static void ad7879_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ad7879 *ts = container_of(chip, struct ad7879, gc); -static struct attribute *ad7879_attributes[] = { - &dev_attr_disable.attr, - &dev_attr_gpio.attr, - NULL -}; + mutex_lock(&ts->mutex); + if (value) + ts->cmd_crtl2 |= AD7879_GPIO_DATA; + else + ts->cmd_crtl2 &= ~AD7879_GPIO_DATA; -static const struct attribute_group ad7879_attr_group = { - .attrs = ad7879_attributes, -}; + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + mutex_unlock(&ts->mutex); +} + +static int __devinit ad7879_gpio_add(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret = 0; + + if (pdata->gpio_export) { + ts->gc.direction_input = ad7879_gpio_direction_input; + ts->gc.direction_output = ad7879_gpio_direction_output; + ts->gc.get = ad7879_gpio_get_value; + ts->gc.set = ad7879_gpio_set_value; + ts->gc.can_sleep = 1; + ts->gc.base = pdata->gpio_base; + ts->gc.ngpio = 1; + ts->gc.label = "AD7879-GPIO"; + ts->gc.owner = THIS_MODULE; + ts->gc.dev = dev; + + ret = gpiochip_add(&ts->gc); + if (ret) + dev_err(dev, "failed to register gpio %d\n", + ts->gc.base); + } + + return ret; +} + +/* + * We mark ad7879_gpio_remove inline so there is a chance the code + * gets discarded when not needed. We can't do __devinit/__devexit + * markup since it is used in both probe and remove methods. + */ +static inline void ad7879_gpio_remove(struct device *dev) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + struct ad7879_platform_data *pdata = dev->platform_data; + int ret; + + if (pdata->gpio_export) { + ret = gpiochip_remove(&ts->gc); + if (ret) + dev_err(dev, "failed to remove gpio %d\n", + ts->gc.base); + } +} +#else +static inline int ad7879_gpio_add(struct device *dev) +{ + return 0; +} + +static inline void ad7879_gpio_remove(struct device *dev) +{ +} +#endif static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) { @@ -403,12 +470,6 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - if (pdata->gpio_output) - ts->gpio_init = AD7879_GPIO_EN | - (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); - else - ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); input_dev->name = "AD7879 Touchscreen"; @@ -446,6 +507,23 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) goto err_free_mem; } + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay); + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, @@ -460,15 +538,21 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) if (err) goto err_free_irq; - err = input_register_device(input_dev); + err = ad7879_gpio_add(&bus->dev); if (err) goto err_remove_attr; + err = input_register_device(input_dev); + if (err) + goto err_remove_gpio; + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", revid >> 8, bus->irq); return 0; +err_remove_gpio: + ad7879_gpio_remove(&bus->dev); err_remove_attr: sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); err_free_irq: @@ -481,6 +565,7 @@ err_free_mem: static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) { + ad7879_gpio_remove(&bus->dev); ad7879_disable(ts); sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); free_irq(ts->bus->irq, ts); diff --git a/include/linux/input.h b/include/linux/input.h index 7be8a6537b57..735ceaf1bc2d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -660,6 +660,7 @@ struct input_absinfo { #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 4231104c9afa..6334cee1a3be 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -28,8 +28,12 @@ struct ad7879_platform_data { * 1 = 4, 2 = 8, 3 = 16 (median > averaging) */ u8 median; - /* 1 = AUX/VBAT/GPIO set to GPIO Output */ - u8 gpio_output; - /* Initial GPIO pin state (valid if gpio_output = 1) */ - u8 gpio_default; + /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib + * requires CONFIG_GPIOLIB + */ + bool gpio_export; + /* identifies the first GPIO number handled by this chip; + * or, if negative, requests dynamic ID allocation. + */ + s32 gpio_base; }; |