summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c33
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_hw4.h44
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c102
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c90
5 files changed, 259 insertions, 11 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 6ecd6daffc15..135a53baa735 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -755,18 +755,18 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump
+ * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
* @phba: lpfc_hba pointer.
*
* Description:
- * Request SLI4 interface type-2 device to perform a dump of firmware dump
- * object into it's /dbg directory of the flash file system.
+ * Request SLI4 interface type-2 device to perform a physical register set
+ * access.
*
* Returns:
* zero for success
**/
static ssize_t
-lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
+lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
{
struct completion online_compl;
uint32_t reg_val;
@@ -776,6 +776,11 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
if (!phba->cfg_enable_hba_reset)
return -EIO;
+ if ((phba->sli_rev < LPFC_SLI_REV4) ||
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2))
+ return -EPERM;
+
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
@@ -786,7 +791,14 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba)
reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
- reg_val |= LPFC_FW_DUMP_REQUEST;
+
+ if (opcode == LPFC_FW_DUMP)
+ reg_val |= LPFC_FW_DUMP_REQUEST;
+ else if (opcode == LPFC_FW_RESET)
+ reg_val |= LPFC_CTL_PDEV_CTL_FRST;
+ else if (opcode == LPFC_DV_RESET)
+ reg_val |= LPFC_CTL_PDEV_CTL_DRST;
+
writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
/* flush */
@@ -904,12 +916,11 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
else
status = lpfc_do_offline(phba, LPFC_EVT_KILL);
else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
- if ((phba->sli_rev < LPFC_SLI_REV4) ||
- (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
- LPFC_SLI_INTF_IF_TYPE_2))
- return -EPERM;
- else
- status = lpfc_sli4_fw_dump_request(phba);
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);
+ else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
+ else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
+ status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
else
return -EINVAL;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 3b9a6152b7f9..0b63cb2610d0 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -430,5 +430,6 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *);
void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *);
struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t,
uint32_t);
+int lpfc_wr_object(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t *);
/* functions to support SR-IOV */
int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int);
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 115915d4a60a..61a40fd1ad18 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -821,6 +821,7 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0
#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4
+#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC
#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5
/* FCoE Opcodes */
@@ -2372,6 +2373,29 @@ struct lpfc_mbx_get_prof_cfg {
#define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4
#define MB_CQE_STATUS_DMA_FAILED 0x5
+#define LPFC_MBX_WR_CONFIG_MAX_BDE 8
+struct lpfc_mbx_wr_object {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word4;
+#define lpfc_wr_object_eof_SHIFT 31
+#define lpfc_wr_object_eof_MASK 0x00000001
+#define lpfc_wr_object_eof_WORD word4
+#define lpfc_wr_object_write_length_SHIFT 0
+#define lpfc_wr_object_write_length_MASK 0x00FFFFFF
+#define lpfc_wr_object_write_length_WORD word4
+ uint32_t write_offset;
+ uint32_t object_name[26];
+ uint32_t bde_count;
+ struct ulp_bde64 bde[LPFC_MBX_WR_CONFIG_MAX_BDE];
+ } request;
+ struct {
+ uint32_t actual_write_length;
+ } response;
+ } u;
+};
+
/* mailbox queue entry structure */
struct lpfc_mqe {
uint32_t word0;
@@ -2421,6 +2445,7 @@ struct lpfc_mqe {
struct lpfc_mbx_get_func_cfg get_func_cfg;
struct lpfc_mbx_get_prof_cfg get_prof_cfg;
struct lpfc_mbx_nop nop;
+ struct lpfc_mbx_wr_object wr_object;
} un;
};
@@ -2966,9 +2991,28 @@ union lpfc_wqe {
struct gen_req64_wqe gen_req;
};
+#define LPFC_GROUP_OJECT_MAGIC_NUM 0xfeaa0001
+#define LPFC_FILE_TYPE_GROUP 0xf7
+#define LPFC_FILE_ID_GROUP 0xa2
+struct lpfc_grp_hdr {
+ uint32_t size;
+ uint32_t magic_number;
+ uint32_t word2;
+#define lpfc_grp_hdr_file_type_SHIFT 24
+#define lpfc_grp_hdr_file_type_MASK 0x000000FF
+#define lpfc_grp_hdr_file_type_WORD word2
+#define lpfc_grp_hdr_id_SHIFT 16
+#define lpfc_grp_hdr_id_MASK 0x000000FF
+#define lpfc_grp_hdr_id_WORD word2
+ uint8_t rev_name[128];
+};
+
#define FCP_COMMAND 0x0
#define FCP_COMMAND_DATA_OUT 0x1
#define ELS_COMMAND_NON_FIP 0xC
#define ELS_COMMAND_FIP 0xD
#define OTHER_COMMAND 0x8
+#define LPFC_FW_DUMP 1
+#define LPFC_FW_RESET 2
+#define LPFC_DV_RESET 3
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e81912cd257e..2b535cff4b2a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -30,6 +30,7 @@
#include <linux/ctype.h>
#include <linux/aer.h>
#include <linux/slab.h>
+#include <linux/firmware.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -8775,6 +8776,97 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
}
/**
+ * lpfc_write_firmware - attempt to write a firmware image to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @fw: pointer to firmware image returned from request_firmware.
+ *
+ * returns the number of bytes written if write is successful.
+ * returns a negative error value if there were errors.
+ * returns 0 if firmware matches currently active firmware on port.
+ **/
+int
+lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
+{
+ char fwrev[32];
+ struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
+ struct list_head dma_buffer_list;
+ int i, rc = 0;
+ struct lpfc_dmabuf *dmabuf, *next;
+ uint32_t offset = 0, temp_offset = 0;
+
+ INIT_LIST_HEAD(&dma_buffer_list);
+ if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) ||
+ (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) ||
+ (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) ||
+ (image->size != fw->size)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3022 Invalid FW image found. "
+ "Magic:%d Type:%x ID:%x\n",
+ image->magic_number,
+ bf_get(lpfc_grp_hdr_file_type, image),
+ bf_get(lpfc_grp_hdr_id, image));
+ return -EINVAL;
+ }
+ lpfc_decode_firmware_rev(phba, fwrev, 1);
+ if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3023 Updating Firmware. Current Version:%s "
+ "New Version:%s\n",
+ fwrev, image->rev_name);
+ for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
+ GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ SLI4_PAGE_SIZE,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ rc = -ENOMEM;
+ goto out;
+ }
+ list_add_tail(&dmabuf->list, &dma_buffer_list);
+ }
+ while (offset < fw->size) {
+ temp_offset = offset;
+ list_for_each_entry(dmabuf, &dma_buffer_list, list) {
+ if (offset + SLI4_PAGE_SIZE > fw->size) {
+ temp_offset += fw->size - offset;
+ memcpy(dmabuf->virt,
+ fw->data + temp_offset,
+ fw->size - offset);
+ break;
+ }
+ temp_offset += SLI4_PAGE_SIZE;
+ memcpy(dmabuf->virt, fw->data + temp_offset,
+ SLI4_PAGE_SIZE);
+ }
+ rc = lpfc_wr_object(phba, &dma_buffer_list,
+ (fw->size - offset), &offset);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3024 Firmware update failed. "
+ "%d\n", rc);
+ goto out;
+ }
+ }
+ rc = offset;
+ }
+out:
+ list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
+ list_del(&dmabuf->list);
+ dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+ return rc;
+}
+
+/**
* lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
@@ -8803,6 +8895,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
int mcnt;
int adjusted_fcp_eq_count;
int fcp_qidx;
+ const struct firmware *fw;
+ uint8_t file_name[16];
/* Allocate memory for HBA structure */
phba = lpfc_hba_alloc(pdev);
@@ -8957,6 +9051,14 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
+ /* check for firmware upgrade or downgrade */
+ snprintf(file_name, 16, "%s.grp", phba->ModelName);
+ error = request_firmware(&fw, file_name, &phba->pcidev->dev);
+ if (!error) {
+ lpfc_write_firmware(phba, fw);
+ release_firmware(fw);
+ }
+
/* Check if there are static vports to be created. */
lpfc_create_static_vport(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index dd911d6d0ee5..fcfa8c8cfb67 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13500,6 +13500,96 @@ out:
}
/**
+ * lpfc_wr_object - write an object to the firmware
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @dmabuf_list: list of dmabufs to write to the port.
+ * @size: the total byte value of the objects to write to the port.
+ * @offset: the current offset to be used to start the transfer.
+ *
+ * This routine will create a wr_object mailbox command to send to the port.
+ * the mailbox command will be constructed using the dma buffers described in
+ * @dmabuf_list to create a list of BDEs. This routine will fill in as many
+ * BDEs that the imbedded mailbox can support. The @offset variable will be
+ * used to indicate the starting offset of the transfer and will also return
+ * the offset after the write object mailbox has completed. @size is used to
+ * determine the end of the object and whether the eof bit should be set.
+ *
+ * Return 0 is successful and offset will contain the the new offset to use
+ * for the next write.
+ * Return negative value for error cases.
+ **/
+int
+lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
+ uint32_t size, uint32_t *offset)
+{
+ struct lpfc_mbx_wr_object *wr_object;
+ LPFC_MBOXQ_t *mbox;
+ int rc = 0, i = 0;
+ uint32_t shdr_status, shdr_add_status;
+ uint32_t mbox_tmo;
+ union lpfc_sli4_cfg_shdr *shdr;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t written = 0;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_WRITE_OBJECT,
+ sizeof(struct lpfc_mbx_wr_object) -
+ sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
+
+ wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object;
+ wr_object->u.request.write_offset = *offset;
+ sprintf((uint8_t *)wr_object->u.request.object_name, "/");
+ wr_object->u.request.object_name[0] =
+ cpu_to_le32(wr_object->u.request.object_name[0]);
+ bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0);
+ list_for_each_entry(dmabuf, dmabuf_list, list) {
+ if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size)
+ break;
+ wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys);
+ wr_object->u.request.bde[i].addrHigh =
+ putPaddrHigh(dmabuf->phys);
+ if (written + SLI4_PAGE_SIZE >= size) {
+ wr_object->u.request.bde[i].tus.f.bdeSize =
+ (size - written);
+ written += (size - written);
+ bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1);
+ } else {
+ wr_object->u.request.bde[i].tus.f.bdeSize =
+ SLI4_PAGE_SIZE;
+ written += SLI4_PAGE_SIZE;
+ }
+ i++;
+ }
+ wr_object->u.request.bde_count = i;
+ bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3025 Write Object mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ } else
+ *offset += wr_object->u.response.actual_write_length;
+ return rc;
+}
+
+/**
* lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands.
* @vport: pointer to vport data structure.
*
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-02 20:20:18 +0000