diff options
926 files changed, 26471 insertions, 15043 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator new file mode 100644 index 000000000000..79a4a75b2d2c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -0,0 +1,315 @@ +What: /sys/class/regulator/.../state +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + state. This holds the regulator output state. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator output is ON and is supplying + power to the system. + + 'disabled' means the regulator output is OFF and is not + supplying power to the system.. + + 'unknown' means software cannot determine the state. + + NOTE: this field can be used in conjunction with microvolts + and microamps to determine regulator output levels. + + +What: /sys/class/regulator/.../type +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + type. This holds the regulator type. + + This will be one of the following strings: + + 'voltage' + 'current' + 'unknown' + + 'voltage' means the regulator output voltage can be controlled + by software. + + 'current' means the regulator output current limit can be + controlled by software. + + 'unknown' means software cannot control either voltage or + current limit. + + +What: /sys/class/regulator/.../microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + microvolts. This holds the regulator output voltage setting + measured in microvolts (i.e. E-6 Volts). + + NOTE: This value should not be used to determine the regulator + output voltage level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + microamps. This holds the regulator output current limit + setting measured in microamps (i.e. E-6 Amps). + + NOTE: This value should not be used to determine the regulator + output current level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../opmode +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + opmode. This holds the regulator operating mode setting. + + The opmode value can be one of the following strings: + + 'fast' + 'normal' + 'idle' + 'standby' + 'unknown' + + The modes are described in include/linux/regulator/regulator.h + + NOTE: This value should not be used to determine the regulator + output operating mode as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../min_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + min_microvolts. This holds the minimum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + max_microvolts. This holds the maximum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../min_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + min_microamps. This holds the minimum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + max_microamps. This holds the maximum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../num_users +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + num_users. This holds the number of consumer devices that + have called regulator_enable() on this regulator. + + +What: /sys/class/regulator/.../requested_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + requested_microamps. This holds the total requested load + current in microamps for this regulator from all its consumer + devices. + + +What: /sys/class/regulator/.../parent +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Some regulator directories will contain a link called parent. + This points to the parent or supply regulator if one exists. + +What: /sys/class/regulator/.../suspend_mem_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_mem_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_disk_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_standby_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_mem_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_disk_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_standby_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_mem_state. This holds the regulator operating state + when suspended to memory. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_disk_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_disk_state. This holds the regulator operating state + when suspended to disk. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_standby_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com> +Description: + Each regulator directory will contain a field called + suspend_standby_state. This holds the regulator operating + state when suspended to standby. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 8f446070e64a..b1fe00999439 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -22,6 +22,10 @@ Module Parameters and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. +* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + when probing for ISA devices. This is required for the + following boards: + - VIA EPIA SN18000 Note that there is no need to use this parameter if the driver loads without complaining. The driver will say so if it is necessary. diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 9549237530cf..6d41db7f17f8 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has confirmed this "bug". The ADT7463 is reported to work as described in the documentation. The current lm85 driver does not show the offset register. -The ADT7463 has a THERM asserted counter. This counter has a 22.76ms -resolution and a range of 5.8 seconds. The driver implements a 32-bit -accumulator of the counter value to extend the range to over a year. The -counter will stay at it's max value until read. - See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. The Analog Devices datasheet is very detailed and describes a procedure for @@ -206,13 +201,15 @@ Configuration choices: The National LM85's have two vendor specific configuration features. Tach. mode and Spinup Control. For more details on these, -see the LM85 datasheet or Application Note AN-1260. +see the LM85 datasheet or Application Note AN-1260. These features +are not currently supported by the lm85 driver. The Analog Devices ADM1027 has several vendor specific enhancements. The number of pulses-per-rev of the fans can be set, Tach monitoring can be optimized for PWM operation, and an offset can be applied to the temperatures to compensate for systemic errors in the -measurements. +measurements. These features are not currently supported by the lm85 +driver. In addition to the ADM1027 features, the ADT7463 also has Tmin control and THERM asserted counts. Automatic Tmin control acts to adjust the diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index a8686e5a6857..c6cd4956047c 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +CHARGE_COUNTER - the current charge counter (in µAh). This could easily +be negative; there is no empty or full value. It is only useful for +relative, time-based measurements. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt new file mode 100644 index 000000000000..82b7a43aadba --- /dev/null +++ b/Documentation/power/regulator/consumer.txt @@ -0,0 +1,182 @@ +Regulator Consumer Driver Interface +=================================== + +This text describes the regulator interface for consumer device drivers. +Please see overview.txt for a description of the terms used in this text. + + +1. Consumer Regulator Access (static & dynamic drivers) +======================================================= + +A consumer driver can get access to it's supply regulator by calling :- + +regulator = regulator_get(dev, "Vcc"); + +The consumer passes in it's struct device pointer and power supply ID. The core +then finds the correct regulator by consulting a machine specific lookup table. +If the lookup is successful then this call will return a pointer to the struct +regulator that supplies this consumer. + +To release the regulator the consumer driver should call :- + +regulator_put(regulator); + +Consumers can be supplied by more than one regulator e.g. codec consumer with +analog and digital supplies :- + +digital = regulator_get(dev, "Vcc"); /* digital core */ +analog = regulator_get(dev, "Avdd"); /* analog */ + +The regulator access functions regulator_get() and regulator_put() will +usually be called in your device drivers probe() and remove() respectively. + + +2. Regulator Output Enable & Disable (static & dynamic drivers) +==================================================================== + +A consumer can enable it's power supply by calling:- + +int regulator_enable(regulator); + +NOTE: The supply may already be enabled before regulator_enabled() is called. +This may happen if the consumer shares the regulator or the regulator has been +previously enabled by bootloader or kernel board initialization code. + +A consumer can determine if a regulator is enabled by calling :- + +int regulator_is_enabled(regulator); + +This will return > zero when the regulator is enabled. + + +A consumer can disable it's supply when no longer needed by calling :- + +int regulator_disable(regulator); + +NOTE: This may not disable the supply if it's shared with other consumers. The +regulator will only be disabled when the enabled reference count is zero. + +Finally, a regulator can be forcefully disabled in the case of an emergency :- + +int regulator_force_disable(regulator); + +NOTE: this will immediately and forcefully shutdown the regulator output. All +consumers will be powered off. + + +3. Regulator Voltage Control & Status (dynamic drivers) +====================================================== + +Some consumer drivers need to be able to dynamically change their supply +voltage to match system operating points. e.g. CPUfreq drivers can scale +voltage along with frequency to save power, SD drivers may need to select the +correct card voltage, etc. + +Consumers can control their supply voltage by calling :- + +int regulator_set_voltage(regulator, min_uV, max_uV); + +Where min_uV and max_uV are the minimum and maximum acceptable voltages in +microvolts. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the voltage changes instantly, otherwise the voltage +configuration changes and the voltage is physically set when the regulator is +next enabled. + +The regulators configured voltage output can be found by calling :- + +int regulator_get_voltage(regulator); + +NOTE: get_voltage() will return the configured output voltage whether the +regulator is enabled or disabled and should NOT be used to determine regulator +output state. However this can be used in conjunction with is_enabled() to +determine the regulator physical output voltage. + + +4. Regulator Current Limit Control & Status (dynamic drivers) +=========================================================== + +Some consumer drivers need to be able to dynamically change their supply +current limit to match system operating points. e.g. LCD backlight driver can +change the current limit to vary the backlight brightness, USB drivers may want +to set the limit to 500mA when supplying power. + +Consumers can control their supply current limit by calling :- + +int regulator_set_current_limit(regulator, min_uV, max_uV); + +Where min_uA and max_uA are the minimum and maximum acceptable current limit in +microamps. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the current limit changes instantly, otherwise the current +limit configuration changes and the current limit is physically set when the +regulator is next enabled. + +A regulators current limit can be found by calling :- + +int regulator_get_current_limit(regulator); + +NOTE: get_current_limit() will return the current limit whether the regulator +is enabled or disabled and should not be used to determine regulator current +load. + + +5. Regulator Operating Mode Control & Status (dynamic drivers) +============================================================= + +Some consumers can further save system power by changing the operating mode of +their supply regulator to be more efficient when the consumers operating state +changes. e.g. consumer driver is idle and subsequently draws less current + +Regulator operating mode can be changed indirectly or directly. + +Indirect operating mode control. +-------------------------------- +Consumer drivers can request a change in their supply regulator operating mode +by calling :- + +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +This will cause the core to recalculate the total load on the regulator (based +on all it's consumers) and change operating mode (if necessary and permitted) +to best match the current operating load. + +The load_uA value can be determined from the consumers datasheet. e.g.most +datasheets have tables showing the max current consumed in certain situations. + +Most consumers will use indirect operating mode control since they have no +knowledge of the regulator or whether the regulator is shared with other +consumers. + +Direct operating mode control. +------------------------------ +Bespoke or tightly coupled drivers may want to directly control regulator +operating mode depending on their operating point. This can be achieved by +calling :- + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); + +Direct mode will only be used by consumers that *know* about the regulator and +are not sharing the regulator with other consumers. + + +6. Regulator Events +=================== +Regulators can notify consumers of external events. Events could be received by +consumers under regulator stress or failure conditions. + +Consumers can register interest in regulator events by calling :- + +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Consumers can uregister interest by calling :- + +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Regulators use the kernel notifier framework to send event to thier interested +consumers. diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt new file mode 100644 index 000000000000..c9a35665cf70 --- /dev/null +++ b/Documentation/power/regulator/machine.txt @@ -0,0 +1,101 @@ +Regulator Machine Driver Interface +=================================== + +The regulator machine driver interface is intended for board/machine specific +initialisation code to configure the regulator subsystem. Typical things that +machine drivers would do are :- + + 1. Regulator -> Device mapping. + 2. Regulator supply configuration. + 3. Power Domain constraint setting. + + + +1. Regulator -> device mapping +============================== +Consider the following machine :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +The drivers for consumers A & B must be mapped to the correct regulator in +order to control their power supply. This mapping can be achieved in machine +initialisation code by calling :- + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +and is shown with the following code :- + +regulator_set_device_supply("Regulator-1", devB, "Vcc"); +regulator_set_device_supply("Regulator-2", devA, "Vcc"); + +This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 +to the 'Vcc' supply for Consumer A. + + +2. Regulator supply configuration. +================================== +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +Regulator-1 supplies power to Regulator-2. This relationship must be registered +with the core so that Regulator-1 is also enabled when Consumer A enables it's +supply (Regulator-2). + +This relationship can be register with the core via :- + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +In this example we would use the following code :- + +regulator_set_supply("Regulator-2", "Regulator-1"); + +Relationships can be queried by calling :- + +const char *regulator_get_supply(const char *regulator); + + +3. Power Domain constraint setting. +=================================== +Each power domain within a system has physical constraints on voltage and +current. This must be defined in software so that the power domain is always +operated within specifications. + +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + +Constraints can be registered by calling :- + +int regulator_set_platform_constraints(const char *regulator, + struct regulation_constraints *constraints); + +The example is defined as follows :- + +struct regulation_constraints domain_1 = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +struct regulation_constraints domain_2 = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +regulator_set_platform_constraints("Regulator-1", &domain_1); +regulator_set_platform_constraints("Regulator-2", &domain_2); diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt new file mode 100644 index 000000000000..bdcb332bd7fb --- /dev/null +++ b/Documentation/power/regulator/overview.txt @@ -0,0 +1,171 @@ +Linux voltage and current regulator framework +============================================= + +About +===== + +This framework is designed to provide a standard kernel interface to control +voltage and current regulators. + +The intention is to allow systems to dynamically control regulator power output +in order to save power and prolong battery life. This applies to both voltage +regulators (where voltage output is controllable) and current sinks (where +current limit is controllable). + +(C) 2008 Wolfson Microelectronics PLC. +Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> + + +Nomenclature +============ + +Some terms used in this document:- + + o Regulator - Electronic device that supplies power to other devices. + Most regulators can enable and disable their output whilst + some can control their output voltage and or current. + + Input Voltage -> Regulator -> Output Voltage + + + o PMIC - Power Management IC. An IC that contains numerous regulators + and often contains other susbsystems. + + + o Consumer - Electronic device that is supplied power by a regulator. + Consumers can be classified into two types:- + + Static: consumer does not change it's supply voltage or + current limit. It only needs to enable or disable it's + power supply. It's supply voltage is set by the hardware, + bootloader, firmware or kernel board initialisation code. + + Dynamic: consumer needs to change it's supply voltage or + current limit to meet operation demands. + + + o Power Domain - Electronic circuit that is supplied it's input power by the + output power of a regulator, switch or by another power + domain. + + The supply regulator may be behind a switch(s). i.e. + + Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A] + | | + | +-> [Consumer B], [Consumer C] + | + +-> [Consumer D], [Consumer E] + + That is one regulator and three power domains: + + Domain 1: Switch-1, Consumers D & E. + Domain 2: Switch-2, Consumers B & C. + Domain 3: Consumer A. + + and this represents a "supplies" relationship: + + Domain-1 --> Domain-2 --> Domain-3. + + A power domain may have regulators that are supplied power + by other regulators. i.e. + + Regulator-1 -+-> Regulator-2 -+-> [Consumer A] + | + +-> [Consumer B] + + This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + + and a "supplies" relationship: + + Domain-1 --> Domain-2 + + + o Constraints - Constraints are used to define power levels for performance + and hardware protection. Constraints exist at three levels: + + Regulator Level: This is defined by the regulator hardware + operating parameters and is specified in the regulator + datasheet. i.e. + + - voltage output is in the range 800mV -> 3500mV. + - regulator current output limit is 20mA @ 5V but is + 10mA @ 10V. + + Power Domain Level: This is defined in software by kernel + level board initialisation code. It is used to constrain a + power domain to a particular power range. i.e. + + - Domain-1 voltage is 3300mV + - Domain-2 voltage is 1400mV -> 1600mV + - Domain-3 current limit is 0mA -> 20mA. + + Consumer Level: This is defined by consumer drivers + dynamically setting voltage or current limit levels. + + e.g. a consumer backlight driver asks for a current increase + from 5mA to 10mA to increase LCD illumination. This passes + to through the levels as follows :- + + Consumer: need to increase LCD brightness. Lookup and + request next current mA value in brightness table (the + consumer driver could be used on several different + personalities based upon the same reference device). + + Power Domain: is the new current limit within the domain + operating limits for this domain and system state (e.g. + battery power, USB power) + + Regulator Domains: is the new current limit within the + regulator operating parameters for input/ouput voltage. + + If the regulator request passes all the constraint tests + then the new regulator value is applied. + + +Design +====== + +The framework is designed and targeted at SoC based devices but may also be +relevant to non SoC devices and is split into the following four interfaces:- + + + 1. Consumer driver interface. + + This uses a similar API to the kernel clock interface in that consumer + drivers can get and put a regulator (like they can with clocks atm) and + get/set voltage, current limit, mode, enable and disable. This should + allow consumers complete control over their supply voltage and current + limit. This also compiles out if not in use so drivers can be reused in + systems with no regulator based power control. + + See Documentation/power/regulator/consumer.txt + + 2. Regulator driver interface. + + This allows regulator drivers to register their regulators and provide + operations to the core. It also has a notifier call chain for propagating + regulator events to clients. + + See Documentation/power/regulator/regulator.txt + + 3. Machine interface. + + This interface is for machine specific code and allows the creation of + voltage/current domains (with constraints) for each regulator. It can + provide regulator constraints that will prevent device damage through + overvoltage or over current caused by buggy client drivers. It also + allows the creation of a regulator tree whereby some regulators are + supplied by others (similar to a clock tree). + + See Documentation/power/regulator/machine.txt + + 4. Userspace ABI. + + The framework also exports a lot of useful voltage/current/opmode data to + userspace via sysfs. This could be used to help monitor device power + consumption and status. + + See Documentation/ABI/testing/regulator-sysfs.txt diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt new file mode 100644 index 000000000000..a69050143592 --- /dev/null +++ b/Documentation/power/regulator/regulator.txt @@ -0,0 +1,30 @@ +Regulator Driver Interface +========================== + +The regulator driver interface is relatively simple and designed to allow +regulator drivers to register their services with the core framework. + + +Registration +============ + +Drivers can register a regulator by calling :- + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); + +This will register the regulators capabilities and operations the regulator +core. The core does not touch reg_data (private to regulator driver). + +Regulators can be unregistered by calling :- + +void regulator_unregister(struct regulator_dev *rdev); + + +Regulator Events +================ +Regulators can send events (e.g. over temp, under voltage, etc) to consumer +drivers by calling :- + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa38dfe..29d839ce7327 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0506c3..000000000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell <caret@c-side.com> - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f3482e3e4..2ea76d9d137c 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 0843ed0163a5..28b6ec87c642 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft rfkill input line is active. Only if none of the rfkill input lines are active, will it return RFKILL_STATE_UNBLOCKED. -If it doesn't implement the get_state() hook, it must make sure that its calls -to rfkill_force_state() are enough to keep the status always up-to-date, and it -must do a rfkill_force_state() on resume from sleep. +Since the device has a hardware rfkill line, it IS subject to state changes +external to rfkill. Therefore, the driver must make sure that it calls +rfkill_force_state() to keep the status always up-to-date, and it must do a +rfkill_force_state() on resume from sleep. Every time the driver gets a notification from the card that one of its rfkill lines changed state (polling might be needed on badly designed cards that don't @@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried about its current state). The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often. +to know the *real* current state of the hardware. This can happen often, but +it does not do any polling, so it is not enough on hardware that is subject +to state changes outside of the rfkill subsystem. + +Therefore, calling rfkill_force_state() when a state change happens is +mandatory when the device has a hardware rfkill line, or when something else +like the firmware could cause its state to be changed without going through the +rfkill class. Some hardware provides events when its status changes. In these cases, it is best for the driver to not provide a get_state hook, and instead register the rfkill class *already* with the correct status, and keep it updated using rfkill_force_state() when it gets an event from the hardware. +rfkill_force_state() must be used on the device resume handlers to update the +rfkill status, should there be any chance of the device status changing during +the sleep. + There is no provision for a statically-allocated rfkill struct. You must use rfkill_allocate() to allocate one. diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b5..5e6d6ab82433 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1878,13 +1878,9 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained HARDWARE MONITORING -P: Mark M. Hoffman -M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release -S: Maintained +S: Orphaned HARDWARE RANDOM NUMBER GENERATOR CORE S: Orphaned @@ -3968,7 +3964,7 @@ M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git -S: Maintained +S: Supported SUN3/3X P: Sam Creasey @@ -4504,6 +4500,15 @@ M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +VOLTAGE AND CURRENT REGULATOR FRAMEWORK +P: Liam Girdwood +M: lg@opensource.wolfsonmicro.com +P: Mark Brown +M: broonie@opensource.wolfsonmicro.com +W: http://opensource.wolfsonmicro.com/node/15 +T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git +S: Supported + VT1211 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 257033c691f2..4b8acd2851f4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1225,6 +1225,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/uio/Kconfig" endmenu diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index be2b2f38fd94..bf97801a1068 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 2011adfa6758..38e6a0abeb4e 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 4049768962d2..93b779f94b41 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index fa1c5aecb5a8..a7ddd94363ca 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index c06863847364..df0d6ee672b3 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index d8ec5f9ca6ec..1c76642272a1 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f3cd4a95373a..f945105d6cd6 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set -CONFIG_MTD_NAND_AT91_ECC_HW=y -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index ef903bed061e..5cbd81589647 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 8688362bcf7b..1174e2764875 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 3680bd2df26d..fcb4aaabd439 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index 48d455bc7363..b786e0407e8e 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 26de37f74686..a9f41c24c9dc 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5bad6b9b00d7..a048b92cb407 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_AT91_BUSWIDTH_16 +config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) help diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dc8b40783d94..25765f1afca9 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -376,7 +376,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 8ced9bc82099..d2c5c84bf6b8 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -368,7 +368,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index cae5f52f1278..f5fec0a9cf49 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -283,7 +283,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 483d436af22d..b80860e31383 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -198,7 +198,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9762b15f658a..42108d02f593 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -352,7 +352,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 5f3094870cad..9c61576f1c8d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -194,7 +194,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 117cf6c9afce..1f4725972edc 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -188,7 +188,7 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 99b4ec3818d6..33b1ccdb516d 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 57a6221943ed..3cd5f8d0e2e2 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -148,7 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 6a680795c3c8..daf93a588068 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -185,7 +185,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 43dfbd0d543a..12bf527f93be 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -190,7 +190,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 6605a0980117..63121197f8c9 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -194,7 +194,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 45617c201240..e0c07952cc34 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio } /* det_pin is not connected */ -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 837aedf8ffeb..2f4ecac150d9 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 95800d32bd49..0e9649d3eda1 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index e1f8de2c74a2..b6437f47a77f 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = { static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct mv_sata_platform_data rd88f6281_sata_data = { diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index d50e3650a09e..73e9242da7ad 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -15,6 +15,7 @@ #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/leds.h> @@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init rd88f5181l_fxo_init(void) diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index b56447d32e17..ac482019abbf 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -15,6 +15,7 @@ #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/gpio.h> @@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 1af093ff8cf3..25568c2a3d29 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = { static struct mv643xx_eth_platform_data wnr854t_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wnr854t_init(void) diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index aeab55c6a82d..9b8ee8c48bf0 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = { static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wrt350n_v2_init(void) diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index c45fc7f5a979..b0f615759e97 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -13,6 +13,7 @@ #include <linux/mm.h> #include <linux/hugetlb.h> #include <linux/pagemap.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/sysctl.h> #include <linux/log2.h> @@ -21,7 +22,8 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT; +unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT; +EXPORT_SYMBOL(hpage_shift); pte_t * huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b4c4eaa5dd26..4da736e25333 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -3,6 +3,7 @@ config MIPS default y select HAVE_IDE select HAVE_OPROFILE + select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB @@ -34,7 +35,6 @@ config BASLER_EXCITE select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. @@ -280,7 +280,6 @@ config PMC_MSP select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE @@ -306,7 +305,6 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -359,7 +357,6 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -475,7 +472,6 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN select ZONE_DMA32 if 64BIT @@ -868,7 +864,6 @@ config SOC_PNX8550 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ - select SYS_SUPPORTS_KGDB select GENERIC_GPIO config SWAP_IO_SPACE diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index f18cf92650e3..765c8e287d2b 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG arch/mips/kernel/smtc.c. This debugging option result in significant overhead so should be disabled in production kernels. -config KGDB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB - select DEBUG_INFO - help - If you say Y here, it will be possible to remotely debug the MIPS - kernel using gdb. This enlarges your kernel image disk size by - several megabytes and requires a machine with more than 16 MB, - better 32 MB RAM to avoid excessive linking time. This is only - useful for kernel hackers. If unsure, say N. - -config SYS_SUPPORTS_KGDB - bool - -config GDB_CONSOLE - bool "Console output to GDB" - depends on KGDB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - config SB1XXX_CORELIS bool "Corelis Debugger" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 1fe97cccead1..e4a057d80ab6 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -134,4 +134,3 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index dd0e19dacfcf..df48fd65bbf3 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_PCI) += pci.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c deleted file mode 100644 index af5be7df2f2a..000000000000 --- a/arch/mips/au1000/common/dbg_io.c +++ /dev/null @@ -1,109 +0,0 @@ -#include <linux/types.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_KGDB - -/* - * FIXME the user should be able to select the - * uart to be used for debugging. - */ -#define DEBUG_BASE UART_DEBUG_BASE - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) -#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y)) - -extern unsigned long calc_clock(void); - -void debugInit(u32 baud, u8 data, u8 parity, u8 stop) -{ - if (UART16550_READ(UART_MOD_CNTRL) != 0x3) - UART16550_WRITE(UART_MOD_CNTRL, 3); - calc_clock(); - - /* disable interrupts */ - UART16550_WRITE(UART_IER, 0); - - /* set up baud rate */ - { - u32 divisor; - - /* set divisor */ - divisor = get_au1x00_uart_baud_base() / baud; - UART16550_WRITE(UART_CLK, divisor & 0xffff); - } - - /* set data format */ - UART16550_WRITE(UART_LCR, (data | parity | stop)); -} - -static int remoteDebugInitialized; - -u8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x1) == 0); - return UART16550_READ(UART_RX); -} - - -int putDebugChar(u8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x40) == 0); - UART16550_WRITE(UART_TX, byte); - - return 1; -} - -#endif diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index 5ebe0de5e459..847413514964 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -57,6 +57,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c index 33a4aebe0cba..3bae13c28954 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/au1000/mtx-1/init.c @@ -55,6 +55,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c index 3837365d613d..8a9c7d57208d 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/au1000/pb1000/init.c @@ -52,6 +52,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c index 8355483f3de2..7c6792308bc5 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/au1000/pb1100/init.c @@ -54,7 +54,7 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index 09fd63b86062..e9b2a0fd48ae 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c index 49f51e165863..3b6e395cf952 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/au1000/pb1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c index 1b5f58434bb7..e1055a13a1a0 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/au1000/pb1550/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index b849bf501c04..7516434760a1 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile index 519142c2e4ef..cff29cf46d03 100644 --- a/arch/mips/basler/excite/Makefile +++ b/arch/mips/basler/excite/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ excite_device.o excite_procfs.o -obj-$(CONFIG_KGDB) += excite_dbg_io.o obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c deleted file mode 100644 index d289e3a868cf..000000000000 --- a/arch/mips/basler/excite/excite_dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <asm/gdb-stub.h> -#include <asm/rm9k-ocd.h> -#include <excite.h> - -#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1 -#error Debug port used by serial driver -#endif - -#define UART_CLK 25000000 -#define BASE_BAUD (UART_CLK / 16) -#define REGISTER_BASE_0 0x0208UL -#define REGISTER_BASE_1 0x0238UL - -#define REGISTER_BASE_DBG REGISTER_BASE_1 - -#define CPRR 0x0004 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define UARBR (REGISTER_BASE_DBG + 0x0000) -#define UATHR (REGISTER_BASE_DBG + 0x0004) -#define UADLL (REGISTER_BASE_DBG + 0x0008) -#define UAIER (REGISTER_BASE_DBG + 0x000c) -#define UADLH (REGISTER_BASE_DBG + 0x0010) -#define UAIIR (REGISTER_BASE_DBG + 0x0014) -#define UAFCR (REGISTER_BASE_DBG + 0x0018) -#define UALCR (REGISTER_BASE_DBG + 0x001c) -#define UAMCR (REGISTER_BASE_DBG + 0x0020) -#define UALSR (REGISTER_BASE_DBG + 0x0024) -#define UAMSR (REGISTER_BASE_DBG + 0x0028) -#define UASCR (REGISTER_BASE_DBG + 0x002c) - -#define PARITY_NONE 0 -#define PARITY_ODD 0x08 -#define PARITY_EVEN 0x18 -#define PARITY_MARK 0x28 -#define PARITY_SPACE 0x38 - -#define DATA_5BIT 0x0 -#define DATA_6BIT 0x1 -#define DATA_7BIT 0x2 -#define DATA_8BIT 0x3 - -#define STOP_1BIT 0x0 -#define STOP_2BIT 0x4 - -#define BAUD_DBG 57600 -#define PARITY_DBG PARITY_NONE -#define DATA_DBG DATA_8BIT -#define STOP_DBG STOP_1BIT - -/* Initialize the serial port for KGDB debugging */ -void __init excite_kgdb_init(void) -{ - const u32 divisor = BASE_BAUD / BAUD_DBG; - - /* Take the UART out of reset */ - titan_writel(0x00ff1cff, CPRR); - titan_writel(0x00000000, UACFG); - titan_writel(0x00000002, UACFG); - - titan_writel(0x0, UALCR); - titan_writel(0x0, UAIER); - - /* Disable FIFOs */ - titan_writel(0x00, UAFCR); - - titan_writel(0x80, UALCR); - titan_writel(divisor & 0xff, UADLL); - titan_writel((divisor & 0xff00) >> 8, UADLH); - titan_writel(0x0, UALCR); - - titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR); - - /* Enable receiver interrupt */ - titan_readl(UARBR); - titan_writel(0x1, UAIER); -} - -int getDebugChar(void) -{ - while (!(titan_readl(UALSR) & 0x1)); - return titan_readl(UARBR); -} - -int putDebugChar(int data) -{ - while (!(titan_readl(UALSR) & 0x20)); - titan_writel(data, UATHR); - return 1; -} - -/* KGDB interrupt handler */ -asmlinkage void excite_kgdb_inthdl(void) -{ - if (unlikely( - ((titan_readl(UAIIR) & 0x7) == 4) - && ((titan_readl(UARBR) & 0xff) == 0x3))) - set_async_breakpoint(®s->cp0_epc); -} diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c index 4903e067916b..934e0a6b1011 100644 --- a/arch/mips/basler/excite/excite_irq.c +++ b/arch/mips/basler/excite/excite_irq.c @@ -50,10 +50,6 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); - -#ifdef CONFIG_KGDB - excite_kgdb_init(); -#endif } asmlinkage void plat_irq_dispatch(void) @@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void) msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); if ((pending & (1 << TITAN_IRQ)) && msgint) { ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); -#if defined(CONFIG_KGDB) - excite_kgdb_inthdl(); -#endif do_IRQ(TITAN_IRQ); return; } diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 6dd8f0d46d09..d66b3b8edf2a 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -95,13 +95,13 @@ static int __init excite_init_console(void) /* Take the DUART out of reset */ titan_writel(0x00ff1cff, CPRR); -#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1) +#if (CONFIG_SERIAL_8250_NR_UARTS > 1) /* Enable both ports */ titan_writel(MASK_SER0 | MASK_SER1, UACFG); #else /* Enable port #0 only */ titan_writel(MASK_SER0, UACFG); -#endif /* defined(CONFIG_KGDB) */ +#endif /* * Set up serial port #0. Do not use autodetection; the result is diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 2678b7ec3351..eb44b72254af 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc5 -# Thu Sep 6 13:14:29 2007 +# Linux kernel version: 2.6.26 +# Fri Jul 25 10:25:34 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_GT641XX=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y @@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -177,23 +198,37 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_I8253=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -250,6 +285,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -337,6 +372,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -475,7 +520,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -504,7 +548,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -518,29 +564,27 @@ CONFIG_ATA=y CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -562,7 +606,12 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -572,6 +621,7 @@ CONFIG_TULIP=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -580,7 +630,6 @@ CONFIG_TULIP=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -588,7 +637,6 @@ CONFIG_TULIP=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -642,7 +689,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -CONFIG_COBALT_LCD=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_COBALT=y +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -751,15 +858,18 @@ CONFIG_USB=m # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -833,16 +942,10 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +CONFIG_EXT4DEV_FS_XATTR=y +CONFIG_EXT4DEV_FS_POSIX_ACL=y +CONFIG_EXT4DEV_FS_SECURITY=y CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -967,7 +1057,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # @@ -1057,14 +1134,95 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index ebb8ad62b3a3..a279165e3a7d 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index ad4e5ef65592..8944d15caf13 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d0dc2e83ad35..ab17973107fd 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 9155082313c8..b65803f19352 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index e4e324422cd9..a190ac07740b 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 3572e80356d2..4e465e945991 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 138c575a0151..831d3e5a1ea6 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 59d19472b161..dd13db4d0fb9 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index bacf0dd0e345..db9272677aa2 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 6dfe6f793cef..9e21e333a2fc 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index c965a87e6a96..af67ed4f71ae 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 0778996c682f..7956f56cbf3e 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 37c7b5ffd474..723bd5176a35 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 893e5c4ab66d..b5052fb42e9e 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index e42aed5a38bb..c7c0864b8ce9 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 1ea97865f2ce..a9acaa2f9da3 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 7f86c43d1bda..ea8249c75b3f 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c index 11567702b155..d70627de7cfe 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma2rh/markeins/platform.c @@ -34,7 +34,6 @@ #include <asm/bcache.h> #include <asm/irq.h> #include <asm/reboot.h> -#include <asm/gdb-stub.h> #include <asm/traps.h> #include <asm/debug.h> diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 62bfb455d1b1..a56c4b804b07 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -41,7 +41,6 @@ #include <asm/bcache.h> #include <asm/irq.h> #include <asm/reboot.h> -#include <asm/gdb-stub.h> #include <asm/traps.h> #include <asm/debug.h> diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0fd31974ba28..706f93974797 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o -obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S deleted file mode 100644 index 2c446063636a..000000000000 --- a/arch/mips/kernel/gdb-low.S +++ /dev/null @@ -1,394 +0,0 @@ -/* - * gdb-low.S contains the low-level trap handler for the GDB stub. - * - * Copyright (C) 1995 Andreas Busse - */ -#include <linux/sys.h> - -#include <asm/asm.h> -#include <asm/errno.h> -#include <asm/irqflags.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> -#include <asm/gdb-stub.h> - -#ifdef CONFIG_32BIT -#define DMFC0 mfc0 -#define DMTC0 mtc0 -#define LDC1 lwc1 -#define SDC1 lwc1 -#endif -#ifdef CONFIG_64BIT -#define DMFC0 dmfc0 -#define DMTC0 dmtc0 -#define LDC1 ldc1 -#define SDC1 ldc1 -#endif - -/* - * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed) - * part is used to store registers and passed to exception handler. - * The upper part is reserved for "call func" feature where gdb client - * saves some of the regs, setups call frame and passes args. - * - * A trace shows about 200 bytes are used to store about half of all regs. - * The rest should be big enough for frame setup and passing args. - */ - -/* - * The low level trap handler - */ - .align 5 - NESTED(trap_low, GDB_FR_SIZE, sp) - .set noat - .set noreorder - - mfc0 k0, CP0_STATUS - sll k0, 3 /* extract cu0 bit */ - bltz k0, 1f - move k1, sp - - /* - * Called from user mode, go somewhere else. - */ - mfc0 k0, CP0_CAUSE - andi k0, k0, 0x7c -#ifdef CONFIG_64BIT - dsll k0, k0, 1 -#endif - PTR_L k1, saved_vectors(k0) - jr k1 - nop -1: - move k0, sp - PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above - LONG_S k0, GDB_FR_REG29(sp) - LONG_S $2, GDB_FR_REG2(sp) - -/* - * First save the CP0 and special registers - */ - - mfc0 v0, CP0_STATUS - LONG_S v0, GDB_FR_STATUS(sp) - mfc0 v0, CP0_CAUSE - LONG_S v0, GDB_FR_CAUSE(sp) - DMFC0 v0, CP0_EPC - LONG_S v0, GDB_FR_EPC(sp) - DMFC0 v0, CP0_BADVADDR - LONG_S v0, GDB_FR_BADVADDR(sp) - mfhi v0 - LONG_S v0, GDB_FR_HI(sp) - mflo v0 - LONG_S v0, GDB_FR_LO(sp) - -/* - * Now the integer registers - */ - - LONG_S zero, GDB_FR_REG0(sp) /* I know... */ - LONG_S $1, GDB_FR_REG1(sp) - /* v0 already saved */ - LONG_S $3, GDB_FR_REG3(sp) - LONG_S $4, GDB_FR_REG4(sp) - LONG_S $5, GDB_FR_REG5(sp) - LONG_S $6, GDB_FR_REG6(sp) - LONG_S $7, GDB_FR_REG7(sp) - LONG_S $8, GDB_FR_REG8(sp) - LONG_S $9, GDB_FR_REG9(sp) - LONG_S $10, GDB_FR_REG10(sp) - LONG_S $11, GDB_FR_REG11(sp) - LONG_S $12, GDB_FR_REG12(sp) - LONG_S $13, GDB_FR_REG13(sp) - LONG_S $14, GDB_FR_REG14(sp) - LONG_S $15, GDB_FR_REG15(sp) - LONG_S $16, GDB_FR_REG16(sp) - LONG_S $17, GDB_FR_REG17(sp) - LONG_S $18, GDB_FR_REG18(sp) - LONG_S $19, GDB_FR_REG19(sp) - LONG_S $20, GDB_FR_REG20(sp) - LONG_S $21, GDB_FR_REG21(sp) - LONG_S $22, GDB_FR_REG22(sp) - LONG_S $23, GDB_FR_REG23(sp) - LONG_S $24, GDB_FR_REG24(sp) - LONG_S $25, GDB_FR_REG25(sp) - LONG_S $26, GDB_FR_REG26(sp) - LONG_S $27, GDB_FR_REG27(sp) - LONG_S $28, GDB_FR_REG28(sp) - /* sp already saved */ - LONG_S $30, GDB_FR_REG30(sp) - LONG_S $31, GDB_FR_REG31(sp) - - CLI /* disable interrupts */ - TRACE_IRQS_OFF - -/* - * Followed by the floating point registers - */ - mfc0 v0, CP0_STATUS /* FPU enabled? */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0,2f /* disabled, skip */ - nop - - SDC1 $0, GDB_FR_FPR0(sp) - SDC1 $1, GDB_FR_FPR1(sp) - SDC1 $2, GDB_FR_FPR2(sp) - SDC1 $3, GDB_FR_FPR3(sp) - SDC1 $4, GDB_FR_FPR4(sp) - SDC1 $5, GDB_FR_FPR5(sp) - SDC1 $6, GDB_FR_FPR6(sp) - SDC1 $7, GDB_FR_FPR7(sp) - SDC1 $8, GDB_FR_FPR8(sp) - SDC1 $9, GDB_FR_FPR9(sp) - SDC1 $10, GDB_FR_FPR10(sp) - SDC1 $11, GDB_FR_FPR11(sp) - SDC1 $12, GDB_FR_FPR12(sp) - SDC1 $13, GDB_FR_FPR13(sp) - SDC1 $14, GDB_FR_FPR14(sp) - SDC1 $15, GDB_FR_FPR15(sp) - SDC1 $16, GDB_FR_FPR16(sp) - SDC1 $17, GDB_FR_FPR17(sp) - SDC1 $18, GDB_FR_FPR18(sp) - SDC1 $19, GDB_FR_FPR19(sp) - SDC1 $20, GDB_FR_FPR20(sp) - SDC1 $21, GDB_FR_FPR21(sp) - SDC1 $22, GDB_FR_FPR22(sp) - SDC1 $23, GDB_FR_FPR23(sp) - SDC1 $24, GDB_FR_FPR24(sp) - SDC1 $25, GDB_FR_FPR25(sp) - SDC1 $26, GDB_FR_FPR26(sp) - SDC1 $27, GDB_FR_FPR27(sp) - SDC1 $28, GDB_FR_FPR28(sp) - SDC1 $29, GDB_FR_FPR29(sp) - SDC1 $30, GDB_FR_FPR30(sp) - SDC1 $31, GDB_FR_FPR31(sp) - -/* - * FPU control registers - */ - - cfc1 v0, CP1_STATUS - LONG_S v0, GDB_FR_FSR(sp) - cfc1 v0, CP1_REVISION - LONG_S v0, GDB_FR_FIR(sp) - -/* - * Current stack frame ptr - */ - -2: - LONG_S sp, GDB_FR_FRP(sp) - -/* - * CP0 registers (R4000/R4400 unused registers skipped) - */ - - mfc0 v0, CP0_INDEX - LONG_S v0, GDB_FR_CP0_INDEX(sp) - mfc0 v0, CP0_RANDOM - LONG_S v0, GDB_FR_CP0_RANDOM(sp) - DMFC0 v0, CP0_ENTRYLO0 - LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp) - DMFC0 v0, CP0_ENTRYLO1 - LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp) - DMFC0 v0, CP0_CONTEXT - LONG_S v0, GDB_FR_CP0_CONTEXT(sp) - mfc0 v0, CP0_PAGEMASK - LONG_S v0, GDB_FR_CP0_PAGEMASK(sp) - mfc0 v0, CP0_WIRED - LONG_S v0, GDB_FR_CP0_WIRED(sp) - DMFC0 v0, CP0_ENTRYHI - LONG_S v0, GDB_FR_CP0_ENTRYHI(sp) - mfc0 v0, CP0_PRID - LONG_S v0, GDB_FR_CP0_PRID(sp) - - .set at - -/* - * Continue with the higher level handler - */ - - move a0,sp - - jal handle_exception - nop - -/* - * Restore all writable registers, in reverse order - */ - - .set noat - - LONG_L v0, GDB_FR_CP0_ENTRYHI(sp) - LONG_L v1, GDB_FR_CP0_WIRED(sp) - DMTC0 v0, CP0_ENTRYHI - mtc0 v1, CP0_WIRED - LONG_L v0, GDB_FR_CP0_PAGEMASK(sp) - LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp) - mtc0 v0, CP0_PAGEMASK - DMTC0 v1, CP0_ENTRYLO1 - LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp) - LONG_L v1, GDB_FR_CP0_INDEX(sp) - DMTC0 v0, CP0_ENTRYLO0 - LONG_L v0, GDB_FR_CP0_CONTEXT(sp) - mtc0 v1, CP0_INDEX - DMTC0 v0, CP0_CONTEXT - - -/* - * Next, the floating point registers - */ - mfc0 v0, CP0_STATUS /* check if the FPU is enabled */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0, 3f /* disabled, skip */ - nop - - LDC1 $31, GDB_FR_FPR31(sp) - LDC1 $30, GDB_FR_FPR30(sp) - LDC1 $29, GDB_FR_FPR29(sp) - LDC1 $28, GDB_FR_FPR28(sp) - LDC1 $27, GDB_FR_FPR27(sp) - LDC1 $26, GDB_FR_FPR26(sp) - LDC1 $25, GDB_FR_FPR25(sp) - LDC1 $24, GDB_FR_FPR24(sp) - LDC1 $23, GDB_FR_FPR23(sp) - LDC1 $22, GDB_FR_FPR22(sp) - LDC1 $21, GDB_FR_FPR21(sp) - LDC1 $20, GDB_FR_FPR20(sp) - LDC1 $19, GDB_FR_FPR19(sp) - LDC1 $18, GDB_FR_FPR18(sp) - LDC1 $17, GDB_FR_FPR17(sp) - LDC1 $16, GDB_FR_FPR16(sp) - LDC1 $15, GDB_FR_FPR15(sp) - LDC1 $14, GDB_FR_FPR14(sp) - LDC1 $13, GDB_FR_FPR13(sp) - LDC1 $12, GDB_FR_FPR12(sp) - LDC1 $11, GDB_FR_FPR11(sp) - LDC1 $10, GDB_FR_FPR10(sp) - LDC1 $9, GDB_FR_FPR9(sp) - LDC1 $8, GDB_FR_FPR8(sp) - LDC1 $7, GDB_FR_FPR7(sp) - LDC1 $6, GDB_FR_FPR6(sp) - LDC1 $5, GDB_FR_FPR5(sp) - LDC1 $4, GDB_FR_FPR4(sp) - LDC1 $3, GDB_FR_FPR3(sp) - LDC1 $2, GDB_FR_FPR2(sp) - LDC1 $1, GDB_FR_FPR1(sp) - LDC1 $0, GDB_FR_FPR0(sp) - -/* - * Now the CP0 and integer registers - */ - -3: -#ifdef CONFIG_MIPS_MT_SMTC - /* Read-modify write of Status must be atomic */ - mfc0 t2, CP0_TCSTATUS - ori t1, t2, TCSTATUS_IXMT - mtc0 t1, CP0_TCSTATUS - andi t2, t2, TCSTATUS_IXMT - _ehb - DMT 9 # dmt t1 - jal mips_ihb - nop -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 t0, CP0_STATUS - ori t0, 0x1f - xori t0, 0x1f - mtc0 t0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - andi t1, t1, VPECONTROL_TE - beqz t1, 9f - nop - EMT # emt -9: - mfc0 t1, CP0_TCSTATUS - xori t1, t1, TCSTATUS_IXMT - or t1, t1, t2 - mtc0 t1, CP0_TCSTATUS - _ehb -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_L v0, GDB_FR_STATUS(sp) - LONG_L v1, GDB_FR_EPC(sp) - mtc0 v0, CP0_STATUS - DMTC0 v1, CP0_EPC - LONG_L v0, GDB_FR_HI(sp) - LONG_L v1, GDB_FR_LO(sp) - mthi v0 - mtlo v1 - LONG_L $31, GDB_FR_REG31(sp) - LONG_L $30, GDB_FR_REG30(sp) - LONG_L $28, GDB_FR_REG28(sp) - LONG_L $27, GDB_FR_REG27(sp) - LONG_L $26, GDB_FR_REG26(sp) - LONG_L $25, GDB_FR_REG25(sp) - LONG_L $24, GDB_FR_REG24(sp) - LONG_L $23, GDB_FR_REG23(sp) - LONG_L $22, GDB_FR_REG22(sp) - LONG_L $21, GDB_FR_REG21(sp) - LONG_L $20, GDB_FR_REG20(sp) - LONG_L $19, GDB_FR_REG19(sp) - LONG_L $18, GDB_FR_REG18(sp) - LONG_L $17, GDB_FR_REG17(sp) - LONG_L $16, GDB_FR_REG16(sp) - LONG_L $15, GDB_FR_REG15(sp) - LONG_L $14, GDB_FR_REG14(sp) - LONG_L $13, GDB_FR_REG13(sp) - LONG_L $12, GDB_FR_REG12(sp) - LONG_L $11, GDB_FR_REG11(sp) - LONG_L $10, GDB_FR_REG10(sp) - LONG_L $9, GDB_FR_REG9(sp) - LONG_L $8, GDB_FR_REG8(sp) - LONG_L $7, GDB_FR_REG7(sp) - LONG_L $6, GDB_FR_REG6(sp) - LONG_L $5, GDB_FR_REG5(sp) - LONG_L $4, GDB_FR_REG4(sp) - LONG_L $3, GDB_FR_REG3(sp) - LONG_L $2, GDB_FR_REG2(sp) - LONG_L $1, GDB_FR_REG1(sp) -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - LONG_L k0, GDB_FR_EPC(sp) - LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */ - jr k0 - rfe -#else - LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */ - - .set mips3 - eret - .set mips0 -#endif - .set at - .set reorder - END(trap_low) - -LEAF(kgdb_read_byte) -4: lb t0, (a0) - sb t0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 4b, kgdbfault - .previous - END(kgdb_read_byte) - -LEAF(kgdb_write_byte) -5: sb a0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 5b, kgdbfault - .previous - END(kgdb_write_byte) - - .type kgdbfault@function - .ent kgdbfault - -kgdbfault: li v0, -EFAULT - jr ra - .end kgdbfault diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c deleted file mode 100644 index 25f4eab8ea9c..000000000000 --- a/arch/mips/kernel/gdb-stub.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * arch/mips/kernel/gdb-stub.c - * - * Originally written by Glenn Engel, Lake Stevens Instrument Division - * - * Contributed by HP Systems - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * - * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse - * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de> - * - * Copyright (C) 1995 Andreas Busse - * - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $<packet info>#<checksum>. - * - * where - * <packet info> :: <characters representing the command or response> - * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>> - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=mips-linux-elf - * $ make - * $ install - * $ which mips-linux-elf-gdb - * /usr/local/bin/mips-linux-elf-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging> - * $ make - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_KGDB which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ mips-linux-elf-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - */ -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/reboot.h> - -#include <asm/asm.h> -#include <asm/cacheflush.h> -#include <asm/mipsregs.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/gdb-stub.h> -#include <asm/inst.h> - -/* - * external low-level support routines - */ - -extern int putDebugChar(char c); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ -extern void trap_low(void); - -/* - * breakpoint and test functions - */ -extern void breakpoint(void); -extern void breakinst(void); -extern void async_breakpoint(void); -extern void async_breakinst(void); -extern void adel(void); - -/* - * local prototypes - */ - -static void getpacket(char *buffer); -static void putpacket(char *buffer); -static int computeSignal(int tt); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, int *intValue); -static int hexToLong(char **ptr, long *longValue); -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); -void handle_exception(struct gdb_regs *regs); - -int kgdb_enabled; - -/* - * spin locks for smp case - */ -static DEFINE_SPINLOCK(kgdb_lock); -static raw_spinlock_t kgdb_cpulock[NR_CPUS] = { - [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED, -}; - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; -static int initialized; /* !0 means we've been initialized */ -static int kgdb_started; -static const char hexchars[]="0123456789abcdef"; - -/* Used to prevent crashes in memory access. Note that they'll crash anyway if - we haven't set up fault handlers yet... */ -int kgdb_read_byte(unsigned char *address, unsigned char *dest); -int kgdb_write_byte(unsigned char val, unsigned char *dest); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -/* - * scan for the sequence $<data>#<checksum> - */ -static void getpacket(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int i; - int count; - unsigned char ch; - - do { - /* - * wait around for the start character, - * ignore all other characters - */ - while ((ch = (getDebugChar() & 0x7f)) != '$') ; - - checksum = 0; - xmitcsum = -1; - count = 0; - - /* - * now, read until a # or end of buffer is found - */ - while (count < BUFMAX) { - ch = getDebugChar(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - - if (count >= BUFMAX) - continue; - - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(getDebugChar() & 0x7f) << 4; - xmitcsum |= hex(getDebugChar() & 0x7f); - - if (checksum != xmitcsum) - putDebugChar('-'); /* failed checksum */ - else { - putDebugChar('+'); /* successful transfer */ - - /* - * if a sequence char is present, - * reply the sequence ID - */ - if (buffer[2] == ':') { - putDebugChar(buffer[0]); - putDebugChar(buffer[1]); - - /* - * remove sequence chars from buffer - */ - count = strlen(buffer); - for (i=3; i <= count; i++) - buffer[i-3] = buffer[i]; - } - } - } - } - while (checksum != xmitcsum); -} - -/* - * send the packet in buffer. - */ -static void putpacket(char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* - * $<packet info>#<checksum>. - */ - - do { - putDebugChar('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - if (!(putDebugChar(ch))) - return; - checksum += ch; - count += 1; - } - - putDebugChar('#'); - putDebugChar(hexchars[checksum >> 4]); - putDebugChar(hexchars[checksum & 0xf]); - - } - while ((getDebugChar() & 0x7f) != '+'); -} - - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null), in case of mem fault, - * return 0. - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault) -{ - unsigned char ch; - - while (count-- > 0) { - if (kgdb_read_byte(mem++, &ch) != 0) - return 0; - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch & 0xf]; - } - - *buf = 0; - - return buf; -} - -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault) -{ - int i; - unsigned char ch; - - for (i=0; i<count; i++) - { - if (binary) { - ch = *buf++; - if (ch == 0x7d) - ch = 0x20 ^ *buf++; - } - else { - ch = hex(*buf++) << 4; - ch |= hex(*buf++); - } - if (kgdb_write_byte(ch, mem++) != 0) - return 0; - } - - return mem; -} - -/* - * This table contains the mapping between SPARC hardware trap types, and - * signals, which are primarily what GDB understands. It also indicates - * which hardware traps we need to commandeer when initializing the stub. - */ -static struct hard_trap_info { - unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ - unsigned char signo; /* Signal that we map this trap into */ -} hard_trap_info[] = { - { 6, SIGBUS }, /* instruction bus error */ - { 7, SIGBUS }, /* data bus error */ - { 9, SIGTRAP }, /* break */ - { 10, SIGILL }, /* reserved instruction */ -/* { 11, SIGILL }, */ /* CPU unusable */ - { 12, SIGFPE }, /* overflow */ - { 13, SIGTRAP }, /* trap */ - { 14, SIGSEGV }, /* virtual instruction cache coherency */ - { 15, SIGFPE }, /* floating point exception */ - { 23, SIGSEGV }, /* watch */ - { 31, SIGSEGV }, /* virtual data cache coherency */ - { 0, 0} /* Must be last */ -}; - -/* Save the normal trap handlers for user-mode traps. */ -void *saved_vectors[32]; - -/* - * Set up exception handlers for tracing and breakpoints - */ -void set_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - unsigned char c; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low); - - putDebugChar('+'); /* 'hello world' */ - /* - * In case GDB is started before us, ack any packets - * (presumably "$?#xx") sitting there. - */ - while((c = getDebugChar()) != '$'); - while((c = getDebugChar()) != '#'); - c = getDebugChar(); /* eat first csum byte */ - c = getDebugChar(); /* eat second csum byte */ - putDebugChar('+'); /* ack it */ - - initialized = 1; - local_irq_restore(flags); -} - -void restore_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - set_except_vector(ht->tt, saved_vectors[ht->tt]); - local_irq_restore(flags); -} - -/* - * Convert the MIPS hardware trap type code to a Unix signal number. - */ -static int computeSignal(int tt) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - if (ht->tt == tt) - return ht->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return (numChars); -} - -static int hexToLong(char **ptr, long *longValue) -{ - int numChars = 0; - int hexValue; - - *longValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *longValue = (*longValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return numChars; -} - - -#if 0 -/* - * Print registers (on target console) - * Used only to debug the stub... - */ -void show_gdbregs(struct gdb_regs * regs) -{ - /* - * Saved main processor registers - */ - printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg0, regs->reg1, regs->reg2, regs->reg3, - regs->reg4, regs->reg5, regs->reg6, regs->reg7); - printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg8, regs->reg9, regs->reg10, regs->reg11, - regs->reg12, regs->reg13, regs->reg14, regs->reg15); - printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg16, regs->reg17, regs->reg18, regs->reg19, - regs->reg20, regs->reg21, regs->reg22, regs->reg23); - printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg24, regs->reg25, regs->reg26, regs->reg27, - regs->reg28, regs->reg29, regs->reg30, regs->reg31); - - /* - * Saved cp0 registers - */ - printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n", - regs->cp0_epc, regs->cp0_status, regs->cp0_cause); -} -#endif /* dead code */ - -/* - * We single-step by setting breakpoints. When an exception - * is handled, we need to restore the instructions hoisted - * when the breakpoints were set. - * - * This is where we save the original instructions. - */ -static struct gdb_bp_save { - unsigned long addr; - unsigned int val; -} step_bp[2]; - -#define BP 0x0000000d /* break opcode */ - -/* - * Set breakpoint instructions for single stepping. - */ -static void single_step(struct gdb_regs *regs) -{ - union mips_instruction insn; - unsigned long targ; - int is_branch, is_cond, i; - - targ = regs->cp0_epc; - insn.word = *(unsigned int *)targ; - is_branch = is_cond = 0; - - switch (insn.i_format.opcode) { - /* - * jr and jalr are in r_format format. - */ - case spec_op: - switch (insn.r_format.func) { - case jalr_op: - case jr_op: - targ = *(®s->reg0 + insn.r_format.rs); - is_branch = 1; - break; - } - break; - - /* - * This group contains: - * bltz_op, bgez_op, bltzl_op, bgezl_op, - * bltzal_op, bgezal_op, bltzall_op, bgezall_op. - */ - case bcond_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - - /* - * These are unconditional and in j_format. - */ - case jal_op: - case j_op: - is_branch = 1; - targ += 4; - targ >>= 28; - targ <<= 28; - targ |= (insn.j_format.target << 2); - break; - - /* - * These are conditional. - */ - case beq_op: - case beql_op: - case bne_op: - case bnel_op: - case blez_op: - case blezl_op: - case bgtz_op: - case bgtzl_op: - case cop0_op: - case cop1_op: - case cop2_op: - case cop1x_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - } - - if (is_branch) { - i = 0; - if (is_cond && targ != (regs->cp0_epc + 8)) { - step_bp[i].addr = regs->cp0_epc + 8; - step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8); - *(unsigned *)(regs->cp0_epc + 8) = BP; - } - step_bp[i].addr = targ; - step_bp[i].val = *(unsigned *)targ; - *(unsigned *)targ = BP; - } else { - step_bp[0].addr = regs->cp0_epc + 4; - step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4); - *(unsigned *)(regs->cp0_epc + 4) = BP; - } -} - -/* - * If asynchronously interrupted by gdb, then we need to set a breakpoint - * at the interrupted instruction so that we wind up stopped with a - * reasonable stack frame. - */ -static struct gdb_bp_save async_bp; - -/* - * Swap the interrupted EPC with our asynchronous breakpoint routine. - * This is safer than stuffing the breakpoint in-place, since no cache - * flushes (or resulting smp_call_functions) are required. The - * assumption is that only one CPU will be handling asynchronous bp's, - * and only one can be active at a time. - */ -extern spinlock_t smp_call_lock; - -void set_async_breakpoint(unsigned long *epc) -{ - /* skip breaking into userland */ - if ((*epc & 0x80000000) == 0) - return; - -#ifdef CONFIG_SMP - /* avoid deadlock if someone is make IPC */ - if (spin_is_locked(&smp_call_lock)) - return; -#endif - - async_bp.addr = *epc; - *epc = (unsigned long)async_breakpoint; -} - -#ifdef CONFIG_SMP -static void kgdb_wait(void *arg) -{ - unsigned flags; - int cpu = smp_processor_id(); - - local_irq_save(flags); - - __raw_spin_lock(&kgdb_cpulock[cpu]); - __raw_spin_unlock(&kgdb_cpulock[cpu]); - - local_irq_restore(flags); -} -#endif - -/* - * GDB stub needs to call kgdb_wait on all processor with interrupts - * disabled, so it uses it's own special variant. - */ -static int kgdb_smp_call_kgdb_wait(void) -{ -#ifdef CONFIG_SMP - cpumask_t mask = cpu_online_map; - struct call_data_struct data; - int cpu = smp_processor_id(); - int cpus; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - BUG_ON(!cpu_online(cpu)); - - cpu_clear(cpu, mask); - cpus = cpus_weight(mask); - if (!cpus) - return 0; - - if (spin_is_locked(&smp_call_lock)) { - /* - * Some other processor is trying to make us do something - * but we're not going to respond... give up - */ - return -1; - } - - /* - * We will continue here, accepting the fact that - * the kernel may deadlock if another CPU attempts - * to call smp_call_function now... - */ - - data.func = kgdb_wait; - data.info = NULL; - atomic_set(&data.started, 0); - data.wait = 0; - - spin_lock(&smp_call_lock); - call_data = &data; - mb(); - - core_send_ipi_mask(mask, SMP_CALL_FUNCTION); - - /* Wait for response */ - /* FIXME: lock-up detection, backtrace on lock-up */ - while (atomic_read(&data.started) != cpus) - barrier(); - - call_data = NULL; - spin_unlock(&smp_call_lock); -#endif - - return 0; -} - -/* - * This function does all command processing for interfacing to gdb. It - * returns 1 if you should skip the instruction at the trap address, 0 - * otherwise. - */ -void handle_exception(struct gdb_regs *regs) -{ - int trap; /* Trap type */ - int sigval; - long addr; - int length; - char *ptr; - unsigned long *stack; - int i; - int bflag = 0; - - kgdb_started = 1; - - /* - * acquire the big kgdb spinlock - */ - if (!spin_trylock(&kgdb_lock)) { - /* - * some other CPU has the lock, we should go back to - * receive the gdb_wait IPC - */ - return; - } - - /* - * If we're in async_breakpoint(), restore the real EPC from - * the breakpoint. - */ - if (regs->cp0_epc == (unsigned long)async_breakinst) { - regs->cp0_epc = async_bp.addr; - async_bp.addr = 0; - } - - /* - * acquire the CPU spinlocks - */ - for_each_online_cpu(i) - if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0) - panic("kgdb: couldn't get cpulock %d\n", i); - - /* - * force other cpus to enter kgdb - */ - kgdb_smp_call_kgdb_wait(); - - /* - * If we're in breakpoint() increment the PC - */ - trap = (regs->cp0_cause & 0x7c) >> 2; - if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst) - regs->cp0_epc += 4; - - /* - * If we were single_stepping, restore the opcodes hoisted - * for the breakpoint[s]. - */ - if (step_bp[0].addr) { - *(unsigned *)step_bp[0].addr = step_bp[0].val; - step_bp[0].addr = 0; - - if (step_bp[1].addr) { - *(unsigned *)step_bp[1].addr = step_bp[1].val; - step_bp[1].addr = 0; - } - } - - stack = (long *)regs->reg29; /* stack ptr */ - sigval = computeSignal(trap); - - /* - * reply to host that an exception has occurred - */ - ptr = output_buffer; - - /* - * Send trap type (converted to signal) - */ - *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; - - /* - * Send Error PC - */ - *ptr++ = hexchars[REG_EPC >> 4]; - *ptr++ = hexchars[REG_EPC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - *ptr++ = hexchars[REG_FP >> 4]; - *ptr++ = hexchars[REG_FP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - *ptr++ = hexchars[REG_SP >> 4]; - *ptr++ = hexchars[REG_SP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0); - *ptr++ = ';'; - - *ptr++ = 0; - putpacket(output_buffer); /* send it off... */ - - /* - * Wait for input from remote GDB - */ - while (1) { - output_buffer[0] = 0; - getpacket(input_buffer); - - switch (input_buffer[0]) - { - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; - output_buffer[3] = 0; - break; - - /* - * Detach debugger; let CPU run - */ - case 'D': - putpacket(output_buffer); - goto finish_kgdb; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* - * Return the value of the CPU registers - */ - case 'g': - ptr = output_buffer; - ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */ - ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */ - ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */ - ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */ - ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */ - ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */ - break; - - /* - * set the value of the CPU registers - return OK - */ - case 'G': - { - ptr = &input_buffer[1]; - hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0); - ptr += 6*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0); - strcpy(output_buffer, "OK"); - } - break; - - /* - * mAA..AA,LLLL Read LLLL bytes at address AA..AA - */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length)) { - if (mem2hex((char *)addr, output_buffer, length, 1)) - break; - strcpy(output_buffer, "E03"); - } else - strcpy(output_buffer, "E01"); - break; - - /* - * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA - */ - case 'X': - bflag = 1; - /* fall through */ - - /* - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK - */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length) - && *ptr++ == ':') { - if (hex2mem(ptr, (char *)addr, length, bflag, 1)) - strcpy(output_buffer, "OK"); - else - strcpy(output_buffer, "E03"); - } - else - strcpy(output_buffer, "E02"); - break; - - /* - * cAA..AA Continue at address AA..AA(optional) - */ - case 'c': - /* try to read optional parameter, pc unchanged if no parm */ - - ptr = &input_buffer[1]; - if (hexToLong(&ptr, &addr)) - regs->cp0_epc = addr; - - goto exit_kgdb_exception; - break; - - /* - * kill the program; let us try to restart the machine - * Reset the whole machine. - */ - case 'k': - case 'r': - machine_restart("kgdb restarts machine"); - break; - - /* - * Step to next instruction - */ - case 's': - /* - * There is no single step insn in the MIPS ISA, so we - * use breakpoints and continue, instead. - */ - single_step(regs); - goto exit_kgdb_exception; - /* NOTREACHED */ - break; - - /* - * Set baud rate (bBB) - * FIXME: Needs to be written - */ - case 'b': - { -#if 0 - int baudrate; - extern void set_timer_3(); - - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &baudrate)) - { - strcpy(output_buffer, "B01"); - break; - } - - /* Convert baud rate to uart clock divider */ - - switch (baudrate) - { - case 38400: - baudrate = 16; - break; - case 19200: - baudrate = 33; - break; - case 9600: - baudrate = 65; - break; - default: - baudrate = 0; - strcpy(output_buffer, "B02"); - goto x1; - } - - if (baudrate) { - putpacket("OK"); /* Ack before changing speed */ - set_timer_3(baudrate); /* Set it */ - } -#endif - } - break; - - } /* switch */ - - /* - * reply to the request - */ - - putpacket(output_buffer); - - } /* while */ - - return; - -finish_kgdb: - restore_debug_traps(); - -exit_kgdb_exception: - /* release locks so other CPUs can go */ - for_each_online_cpu(i) - __raw_spin_unlock(&kgdb_cpulock[i]); - spin_unlock(&kgdb_lock); - - __flush_cache_all(); - return; -} - -/* - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void breakpoint(void) -{ - if (!initialized) - return; - - __asm__ __volatile__( - ".globl breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -/* Nothing but the break; don't pollute any registers */ -void async_breakpoint(void) -{ - __asm__ __volatile__( - ".globl async_breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "async_breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -void adel(void) -{ - __asm__ __volatile__( - ".globl\tadel\n\t" - "lui\t$8,0x8000\n\t" - "lw\t$9,1($8)\n\t" - ); -} - -/* - * malloc is needed by gdb client in "call func()", even a private one - * will make gdb happy - */ -static void __used *malloc(size_t size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -static void __used free(void *where) -{ - kfree(where); -} - -#ifdef CONFIG_GDB_CONSOLE - -void gdb_putsn(const char *str, int l) -{ - char outbuf[18]; - - if (!kgdb_started) - return; - - outbuf[0]='O'; - - while(l) { - int i = (l>8)?8:l; - mem2hex((char *)str, &outbuf[1], i, 0); - outbuf[(i*2)+1]=0; - putpacket(outbuf); - str += i; - l -= i; - } -} - -static void gdb_console_write(struct console *con, const char *s, unsigned n) -{ - gdb_putsn(s, n); -} - -static struct console gdb_console = { - .name = "gdb", - .write = gdb_console_write, - .flags = CON_PRINTBUFFER, - .index = -1 -}; - -static int __init register_gdb_console(void) -{ - register_console(&gdb_console); - - return 0; -} - -console_initcall(register_gdb_console); - -#endif diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 6045b9a51a35..4b4007b3083a 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -21,11 +21,16 @@ #include <linux/sched.h> #include <linux/seq_file.h> #include <linux/kallsyms.h> +#include <linux/kgdb.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/uaccess.h> +#ifdef CONFIG_KGDB +int kgdb_early_setup; +#endif + static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; int allocate_irqno(void) @@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void) atomic_inc(&irq_err_count); } -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); - -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); -#endif - void __init init_IRQ(void) { int i; +#ifdef CONFIG_KGDB + if (kgdb_early_setup) + return; +#endif + for (i = 0; i < NR_IRQS; i++) set_irq_noprobe(i); arch_init_irq(); #ifdef CONFIG_KGDB - if (kgdb_flag) { - printk("Wait for gdb client connection ...\n"); - set_debug_traps(); - breakpoint(); - } + if (!kgdb_early_setup) + kgdb_early_setup = 1; #endif } diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c new file mode 100644 index 000000000000..c5a8b2d21ca4 --- /dev/null +++ b/arch/mips/kernel/kgdb.c @@ -0,0 +1,281 @@ +/* + * Originally written by Glenn Engel, Lake Stevens Instrument Division + * + * Contributed by HP Systems + * + * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse + * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de> + * + * Copyright (C) 1995 Andreas Busse + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Copyright (C) 2004-2005 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com + * + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/ptrace.h> /* for linux pt_regs struct */ +#include <linux/kgdb.h> +#include <linux/kdebug.h> +#include <linux/sched.h> +#include <asm/inst.h> +#include <asm/fpu.h> +#include <asm/cacheflush.h> +#include <asm/processor.h> +#include <asm/sigcontext.h> + +static struct hard_trap_info { + unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 6, SIGBUS }, /* instruction bus error */ + { 7, SIGBUS }, /* data bus error */ + { 9, SIGTRAP }, /* break */ +/* { 11, SIGILL }, */ /* CPU unusable */ + { 12, SIGFPE }, /* overflow */ + { 13, SIGTRAP }, /* trap */ + { 14, SIGSEGV }, /* virtual instruction cache coherency */ + { 15, SIGFPE }, /* floating point exception */ + { 23, SIGSEGV }, /* watch */ + { 31, SIGSEGV }, /* virtual data cache coherency */ + { 0, 0} /* Must be last */ +}; + +void arch_kgdb_breakpoint(void) +{ + __asm__ __volatile__( + ".globl breakinst\n\t" + ".set\tnoreorder\n\t" + "nop\n" + "breakinst:\tbreak\n\t" + "nop\n\t" + ".set\treorder"); +} + +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), (void *)0); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, NULL); + local_irq_disable(); +} + +static int compute_signal(int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; + + /* FP REGS */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + save_fp(current); + for (reg = 0; reg < 32; reg++) + *(ptr++) = current->thread.fpu.fpr[reg]; +} + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + const u32 *ptr = (u32 *)gdb_regs; +#else + const u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + regs->regs[reg] = *(ptr++); + + regs->cp0_status = *(ptr++); + regs->lo = *(ptr++); + regs->hi = *(ptr++); + regs->cp0_badvaddr = *(ptr++); + regs->cp0_cause = *(ptr++); + regs->cp0_epc = *(ptr++); + + /* FP REGS from current */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + for (reg = 0; reg < 32; reg++) + current->thread.fpu.fpr[reg] = *(ptr++); + restore_fp(current); +} + +/* + * Similar to regs_to_gdb_regs() except that process is sleeping and so + * we may not be able to get all the info. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + int reg; + struct thread_info *ti = task_thread_info(p); + unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32; + struct pt_regs *regs = (struct pt_regs *)ksp - 1; +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 16; reg++) + *(ptr++) = regs->regs[reg]; + + /* S0 - S7 */ + for (reg = 16; reg < 24; reg++) + *(ptr++) = regs->regs[reg]; + + for (reg = 24; reg < 28; reg++) + *(ptr++) = 0; + + /* GP, SP, FP, RA */ + for (reg = 28; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; +} + +/* + * Calls linux_debug_hook before the kernel dies. If KGDB is enabled, + * then try to fall into the debugger + */ +static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, + void *ptr) +{ + struct die_args *args = (struct die_args *)ptr; + struct pt_regs *regs = args->regs; + int trap = (regs->cp0_cause & 0x7c) >> 2; + + if (fixup_exception(regs)) + return NOTIFY_DONE; + + /* Userpace events, ignore. */ + if (user_mode(regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_active) != -1) + kgdb_nmicallback(smp_processor_id(), regs); + + if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_setting_breakpoint)) + if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst)) + regs->cp0_epc += 4; + + /* In SMP mode, __flush_cache_all does IPI */ + local_irq_enable(); + __flush_cache_all(); + + return NOTIFY_STOP; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_mips_notify, +}; + +/* + * Handle the 's' and 'c' commands + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *regs) +{ + char *ptr; + unsigned long address; + int cpu = smp_processor_id(); + + switch (remcom_in_buffer[0]) { + case 's': + case 'c': + /* handle the optional parameter */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &address)) + regs->cp0_epc = address; + + atomic_set(&kgdb_cpu_doing_single_step, -1); + if (remcom_in_buffer[0] == 's') + if (kgdb_contthread) + atomic_set(&kgdb_cpu_doing_single_step, cpu); + + return 0; + } + + return -1; +} + +struct kgdb_arch arch_kgdb_ops; + +/* + * We use kgdb_early_setup so that functions we need to call now don't + * cause trouble when called again later. + */ +int kgdb_arch_init(void) +{ + union mips_instruction insn = { + .r_format = { + .opcode = spec_op, + .func = break_op, + } + }; + memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE); + + register_die_notifier(&kgdb_notifier); + + return 0; +} + +/* + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_die_notifier(&kgdb_notifier); +} diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b8ea4e9d0d87..426cced1e9dc 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -23,6 +23,8 @@ #include <linux/bootmem.h> #include <linux/interrupt.h> #include <linux/ptrace.h> +#include <linux/kgdb.h> +#include <linux/kdebug.h> #include <asm/bootinfo.h> #include <asm/branch.h> @@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs) printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", data ? "Data" : "Instruction", field, regs->cp0_epc, field, regs->regs[31]); + if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Oops", regs); force_sig(SIGBUS, current); } @@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { siginfo_t info; + if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0) + == NOTIFY_STOP) + return; die_if_kernel("FP exception in kernel code", regs); if (fcr31 & FPU_CSR_UNI_X) { @@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code, siginfo_t info; char b[40]; + if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP) + return; + /* * A short test says that IRIX 5.3 sends SIGTRAP for all trap * insns, even for trap and break codes that indicate arithmetic @@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs) unsigned int opcode = 0; int status = -1; + if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Reserved instruction in kernel code", regs); if (unlikely(compute_return_epc(regs) < 0)) @@ -1537,6 +1553,11 @@ void __init trap_init(void) extern char except_vec4; unsigned long i; +#if defined(CONFIG_KGDB) + if (kgdb_early_setup) + return; /* Already done */ +#endif + if (cpu_has_veic || cpu_has_vint) ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); else diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index a782549ac80e..f0cf46adb978 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, old_pagemask = read_c0_pagemask(); w = read_c0_wired(); write_c0_wired(w + 1); - if (read_c0_wired() != w + 1) { - printk("[tlbwired] No WIRED reg?\n"); - return; - } write_c0_index(w << 8); write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index f8064446e812..3b7dd722c32a 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -13,7 +13,6 @@ obj-y := malta-amon.o malta-cmdline.o \ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o -obj-$(CONFIG_KGDB) += malta-kgdb.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index c0653021a171..4832af251668 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -37,15 +37,6 @@ #include <asm/mips-boards/malta.h> -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - int prom_argc; int *_prom_argv, *_prom_envp; @@ -173,51 +164,6 @@ static void __init console_config(void) } #endif -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - static void __init mips_nmi_setup(void) { void *base; diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c deleted file mode 100644 index 6a1854de4579..000000000000 --- a/arch/mips/mti-malta/malta-kgdb.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> - -#include <asm/serial.h> -#include <asm/io.h> - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index e7cad54936ca..dc78b8983eeb 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -199,10 +199,6 @@ void __init plat_mem_setup(void) */ enable_dma(4); -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - #ifdef CONFIG_DMA_COHERENT if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) panic("Hardware DMA cache coherency not supported"); diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile index 31cc1a5cec3b..dd9e7b1f7fd3 100644 --- a/arch/mips/nxp/pnx8550/common/Makefile +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -24,6 +24,5 @@ obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c deleted file mode 100644 index ad4624f6d9bc..000000000000 --- a/arch/mips/nxp/pnx8550/common/gdb_hook.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * This is the interface to the remote debugger stub. - * - */ -#include <linux/types.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> -#include <linux/serial_ip3106.h> - -#include <asm/serial.h> -#include <asm/io.h> - -#include <uart.h> - -static struct serial_state rs_table[IP3106_NR_PORTS] = { -}; -static struct async_struct kdb_port_info = {0}; - -void rs_kgdb_hook(int tty_no) -{ - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = tty_no; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - - /* - * Now, initialize the UART - */ - ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; - ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud -} - -int putDebugChar(char c) -{ - /* Wait until FIFO not full */ - while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, kdb_port_info.port) = c; - - return 1; -} - -char getDebugChar(void) -{ - char ch; - - /* Wait until there is a char in the FIFO */ - while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RXFIFO) >> 8)) - ; - /* Read one char */ - ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RBRTHR; - /* Advance the RX FIFO read pointer */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; - return (ch); -} - -void rs_disable_debug_interrupts(void) -{ - ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ -} - -void rs_enable_debug_interrupts(void) -{ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ -} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index aad03429a5e3..f080f114a1bf 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -34,7 +34,6 @@ #include <linux/module.h> #include <asm/io.h> -#include <asm/gdb-stub.h> #include <int.h> #include <uart.h> diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c index 18b125e3b65d..acf1fa889444 100644 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -22,7 +22,6 @@ #include <linux/random.h> #include <asm/io.h> -#include <asm/gdb-stub.h> #include <int.h> #include <uart.h> diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c index 92d764c97701..2aed50fef10f 100644 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void); extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; -extern void rs_kgdb_hook(int tty_no); extern char *prom_getcmdline(void); struct resource standard_io_resources[] = { @@ -142,16 +141,5 @@ void __init plat_mem_setup(void) ip3106_baud(UART_BASE, pnx8550_console_port) = 5; } -#ifdef CONFIG_KGDB - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - int line; - argptr += strlen("kgdb=ttyS"); - line = *argptr == '0' ? 0 : 1; - rs_kgdb_hook(line); - pr_info("KGDB: Using ttyS%i for session, " - "please connect your debugger\n", line ? 1 : 0); - } -#endif return; } diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 8a17a39e5bf2..31c150196595 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -37,45 +37,48 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <asm/addrspace.h> +#include <asm/txx9irq.h> +#include <asm/txx9/pci.h> #include <asm/txx9/tx3927.h> -static inline int mkaddr(unsigned char bus, unsigned char dev_fn, - unsigned char where) +static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where) { - if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | - (where & 0xfc); + if (bus->parent == NULL && + devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) + return -1; + tx3927_pcicptr->ica = + ((bus->number & 0xff) << 0x10) | + ((devfn & 0xff) << 0x08) | + (where & 0xfc) | (bus->parent ? 1 : 0); /* clear M_ABORT and Disable M_ABORT Int. */ tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT; - - return PCIBIOS_SUCCESSFUL; + return 0; } static inline int check_abort(void) { - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) + if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) { tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; + /* flush write buffer */ + iob(); return PCIBIOS_DEVICE_NOT_FOUND; - + } return PCIBIOS_SUCCESSFUL; } static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } switch (size) { case 1: @@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { case 1: @@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, tx3927_pcicptr->icd = cpu_to_le32(val); } - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) - tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; - tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; - return PCIBIOS_DEVICE_NOT_FOUND; - return check_abort(); } @@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel, PCI_COMMAND_PARITY | PCI_COMMAND_SERR; local_irq_restore(flags); } + +static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n", + regs->cp0_epc); + printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", + tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL; + tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL; + tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL; + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + return IRQ_HANDLED; + } + console_verbose(); + panic("PCI error."); +} + +void __init tx3927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI, + tx3927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX3927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index c6b49bccd274..5989e747527f 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -16,6 +16,8 @@ * option) any later version. */ #include <linux/kernel.h> +#include <linux/interrupt.h> +#include <asm/txx9/pci.h> #include <asm/txx9/tx4927pcic.h> static struct { @@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr) __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16), &pcicptr->pcistatus); + /* flush write buffer */ + iob(); code = PCIBIOS_DEVICE_NOT_FOUND; } return code; @@ -192,6 +196,28 @@ static struct { .gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */ }; +char *__devinit tx4927_pcibios_setup(char *str) +{ + unsigned long val; + + if (!strncmp(str, "trdyto=", 7)) { + if (strict_strtoul(str + 7, 0, &val) == 0) + tx4927_pci_opts.trdyto = val; + return NULL; + } + if (!strncmp(str, "retryto=", 8)) { + if (strict_strtoul(str + 8, 0, &val) == 0) + tx4927_pci_opts.retryto = val; + return NULL; + } + if (!strncmp(str, "gbwc=", 5)) { + if (strict_strtoul(str + 5, 0, &val) == 0) + tx4927_pci_opts.gbwc = val; + return NULL; + } + return str; +} + void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, struct pci_controller *channel, int extarb) { @@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void) tx4927_report_pcic_status1(pcicptrs[i].pcicptr); } } + +static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr) +{ + int i; + __u32 __iomem *preg = (__u32 __iomem *)pcicptr; + + printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr); + for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) { + if (i % 32 == 0) { + printk(KERN_CONT "\n"); + printk(KERN_INFO "%04x:", i); + } + /* skip registers with side-effects */ + if (i == offsetof(struct tx4927_pcic_reg, g2pintack) + || i == offsetof(struct tx4927_pcic_reg, g2pspc) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) { + printk(KERN_CONT " XXXXXXXX"); + continue; + } + printk(KERN_CONT " %08x", __raw_readl(preg)); + } + printk(KERN_CONT "\n"); +} + +void tx4927_dump_pcic_settings(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].pcicptr) + tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr); + } +} + +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + struct tx4927_pcic_reg __iomem *pcicptr = + (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id; + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n", + (int)(2 * sizeof(unsigned long)), regs->cp0_epc); + tx4927_report_pcic_status1(pcicptr); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (TX4927_PCIC_PCISTATUS_ALL << 16), + &pcicptr->pcistatus); + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus); + __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus); + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus); + return IRQ_HANDLED; + } + console_verbose(); + tx4927_dump_pcic_settings1(pcicptr); + panic("PCI error."); +} + +#ifdef CONFIG_TOSHIBA_FPCIB0 +static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus); + + if (!pcicptr) + return; + if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) { + /* Reset Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg); + /* + * swap reqBP and reqXP (raise priority of SLC90E66). + * SLC90E66(PCI-ISA bridge) is connected to REQ2 on + * PCI Backplane board. + */ + __raw_writel(0x72543610, &pcicptr->pbareqport); + __raw_writel(0, &pcicptr->pbabm); + /* Use Fixed ParkMaster (required by SLC90E66) */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg); + /* Enable Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA | + TX4927_PCIC_PBACFG_PBAEN, + &pcicptr->pbacfg); + printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n", + __raw_readl(&pcicptr->pbareqport)); + } +} +#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, + tx4927_quirk_slc90e66_bridge); +#endif diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c index 27e86a09dd41..aaa900596792 100644 --- a/arch/mips/pci/pci-tx4927.c +++ b/arch/mips/pci/pci-tx4927.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/kernel.h> +#include <linux/interrupt.h> #include <asm/txx9/generic.h> #include <asm/txx9/tx4927.h> @@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void) pciclk = -1; return pciclk; } + +void __init tx4927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index e5375511c2b7..60e2c52c2c5e 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/kernel.h> +#include <linux/interrupt.h> #include <asm/txx9/generic.h> #include <asm/txx9/tx4938.h> @@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) } return -1; } + +void __init tx4938_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 77bd5b68dc43..c7fe6ec621e6 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif -char *pcibios_setup(char *str) +char * (*pcibios_plat_setup)(char *str) __devinitdata; + +char *__devinit pcibios_setup(char *str) { + if (pcibios_plat_setup) + return pcibios_plat_setup(str); return str; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c index 9de34302e5f4..f7261628d8a6 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c @@ -38,68 +38,6 @@ #include <msp_int.h> #include <msp_regs.h> -#ifdef CONFIG_KGDB -/* - * kgdb uses serial port 1 so the console can remain on port 0. - * To use port 0 change the definition to read as follows: - * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE) - */ -#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE) - -int putDebugChar(char c) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val = (uint32_t)c; - - local_irq_disable(); - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - uart[0] = val; - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - local_irq_enable(); - - return 1; -} - -char getDebugChar(void) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val; - - while( !(uart[5] & 0x01) ); /* Wait for RXRDY */ - val = uart[0]; - - return (char)val; -} - -void initDebugPort(unsigned int uartclk, unsigned int baudrate) -{ - unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate); - - /* Enable FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4, - (char *)DEBUG_PORT_BASE + (UART_FCR * 4)); - - /* Select brtc divisor */ - writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Store divisor lsb */ - writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4)); - - /* Store divisor msb */ - writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); - - /* Set 8N1 mode */ - writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Disable flow control */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4)); - - /* Disable receive interrupt(!) */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); -} -#endif - void __init msp_serial_setup(void) { char *s; @@ -139,17 +77,6 @@ void __init msp_serial_setup(void) case MACH_MSP7120_FPGA: /* Enable UART1 on MSP4200 and MSP7120 */ *GPIO_CFG2_REG = 0x00002299; - -#ifdef CONFIG_KGDB - /* Initialize UART1 for kgdb since PMON doesn't */ - if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) { - if( mips_machtype == MACH_MSP4200_FPGA - || mips_machtype == MACH_MSP7120_FPGA ) - initDebugPort(uartclk, 19200); - else - initDebugPort(uartclk, 57600); - } -#endif break; default: diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index 8fd9a04e3534..b16f95c3df65 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -4,7 +4,6 @@ obj-y += irq.o prom.o py-console.o setup.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c deleted file mode 100644 index 6362c702e389..000000000000 --- a/arch/mips/pmc-sierra/yosemite/dbg_io.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2003 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Support for KGDB for the Yosemite board. We make use of single serial - * port to be used for KGDB as well as console. The second serial port - * seems to be having a problem. Single IRQ is allocated for both the - * ports. Hence, the interrupt routing code needs to figure out whether - * the interrupt came from channel A or B. - */ - -#include <asm/serial.h> - -/* - * Baud rate, Parity, Data and Stop bit settings for the - * serial port on the Yosemite. Note that the Early printk - * patch has been added. So, we should be all set to go - */ -#define YOSEMITE_BAUD_2400 2400 -#define YOSEMITE_BAUD_4800 4800 -#define YOSEMITE_BAUD_9600 9600 -#define YOSEMITE_BAUD_19200 19200 -#define YOSEMITE_BAUD_38400 38400 -#define YOSEMITE_BAUD_57600 57600 -#define YOSEMITE_BAUD_115200 115200 - -#define YOSEMITE_PARITY_NONE 0 -#define YOSEMITE_PARITY_ODD 0x08 -#define YOSEMITE_PARITY_EVEN 0x18 -#define YOSEMITE_PARITY_MARK 0x28 -#define YOSEMITE_PARITY_SPACE 0x38 - -#define YOSEMITE_DATA_5BIT 0x0 -#define YOSEMITE_DATA_6BIT 0x1 -#define YOSEMITE_DATA_7BIT 0x2 -#define YOSEMITE_DATA_8BIT 0x3 - -#define YOSEMITE_STOP_1BIT 0x0 -#define YOSEMITE_STOP_2BIT 0x4 - -/* This is crucial */ -#define SERIAL_REG_OFS 0x1 - -#define SERIAL_RCV_BUFFER 0x0 -#define SERIAL_TRANS_HOLD 0x0 -#define SERIAL_SEND_BUFFER 0x0 -#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS) -#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS) -#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS) -#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS) -#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS) -#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS) -#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS) -#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS) -#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS) -#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS) - -#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS) -#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS) - -/* - * Functions to READ and WRITE to serial port 0 - */ -#define SERIAL_READ(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) - -#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) = val) - -/* - * Functions to READ and WRITE to serial port 1 - */ -#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) - -#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) = val) - -/* - * Second serial port initialization - */ -void init_second_port(void) -{ - /* Disable Interrupts */ - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80); - divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200; - SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE_1(SERIAL_DIVISOR_MSB, - (divisor & 0xff00) >> 8); - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT | - YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT); - - /* Enable Interrupts */ - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf); -} - -/* Initialize the serial port for KGDB debugging */ -void debugInit(unsigned int baud, unsigned char data, unsigned char parity, - unsigned char stop) -{ - /* Disable Interrupts */ - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80); - - divisor = TITAN_SERIAL_BASE_BAUD / baud; - SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8); - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -unsigned char getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0); - return SERIAL_READ(SERIAL_RCV_BUFFER); -} - -int putDebugChar(unsigned char byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0); - SERIAL_WRITE(SERIAL_SEND_BUFFER, byte); - - return 1; -} diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index 4decc2807867..5f673eba142c 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void) } } -#ifdef CONFIG_KGDB -extern void init_second_port(void); -#endif - /* * Initialize the next level interrupt handler */ @@ -156,11 +152,6 @@ void __init arch_init_irq(void) rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); -#ifdef CONFIG_KGDB - /* At this point, initialize the second serial port */ - init_second_port(); -#endif - #ifdef CONFIG_GDB_CONSOLE register_gdb_console(); #endif diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index b2fe82dba0a5..00a1c7877bf4 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = { void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) { - unsigned flags, data; + unsigned long flags; + unsigned data; unsigned i = 0; spin_lock_irqsave(&dev3.lock, flags); @@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg); void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) { - unsigned flags; + unsigned long flags; spin_lock_irqsave(&dev3.lock, flags); diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c index db74edf8cefb..8e7a46855b50 100644 --- a/arch/mips/rb532/time.c +++ b/arch/mips/rb532/time.c @@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void) void __init plat_time_init(void) { - unsigned int est_freq, flags; - unsigned long r4k_offset; + unsigned int est_freq; + unsigned long flags, r4k_offset; local_irq_save(flags); diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 5f389ee26fca..896a1ef84829 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -20,7 +20,6 @@ #include <asm/irq.h> #include <asm/reboot.h> #include <asm/time.h> -#include <asm/gdb-stub.h> #include <asm/io.h> #include <asm/traps.h> #include <asm/sgialib.h> @@ -81,30 +80,6 @@ void __init plat_mem_setup(void) add_preferred_console("arc", 0, NULL); } -#ifdef CONFIG_KGDB - { - char *kgdb_ttyd = prom_getcmdline(); - - if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) { - int line; - kgdb_ttyd += strlen("kgdb=ttyd"); - if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2') - printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c" - ", falling back to /dev/ttyd1\n", *kgdb_ttyd); - line = *kgdb_ttyd == '2' ? 0 : 1; - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session\n", line ? 1 : 2); - rs_kgdb_hook(line); - - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session, please connect your debugger\n", line ? 1:2); - - kgdb_enabled = 1; - /* Breakpoints and stuff are in sgi_irq_setup() */ - } - } -#endif - #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE) { ULONG *gfxinfo; diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index e0a6871d56e4..31f4931b8484 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -7,7 +7,6 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \ ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o -obj-$(CONFIG_KGDB) += ip27-dbgio.o obj-$(CONFIG_SMP) += ip27-smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c deleted file mode 100644 index 08fd88b36f80..000000000000 --- a/arch/mips/sgi-ip27/ip27-dbgio.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2004 Ralf Baechle <ralf@linux-mips.org> - */ -#include <asm/sn/addrs.h> -#include <asm/sn/sn0/hub.h> -#include <asm/sn/klconfig.h> -#include <asm/sn/ioc3.h> -#include <asm/sn/sn_private.h> - -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> - -#define IOC3_CLK (22000000 / 3) -#define IOC3_FLAGS (0) - -static inline struct ioc3_uartregs *console_uart(void) -{ - struct ioc3 *ioc3; - - ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base; - - return &ioc3->sregs.uarta; -} - -unsigned char getDebugChar(void) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_DR) == 0); - return uart->iu_rbr; -} - -void putDebugChar(unsigned char c) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_THRE) == 0); - uart->iu_thr = c; -} diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index db372a0f106d..a35818ed4263 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ht_eoi_space; #endif -#ifdef CONFIG_KGDB -#include <asm/gdb-stub.h> -extern void breakpoint(void); -static int kgdb_irq; -#ifdef CONFIG_GDB_CONSOLE -extern void register_gdb_console(void); -#endif - -/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */ -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip bcm1480_irq_type = { .name = "BCM1480-IMR", .ack = ack_bcm1480_irq, @@ -355,61 +331,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - /* QQQ FIXME */ - __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + - (kgdb_irq << 3))); - bcm1480_unmask_irq(0, kgdb_irq); - -#ifdef CONFIG_GDB_CONSOLE - register_gdb_console(); -#endif - printk("Waiting for GDB on UART port %d\n", kgdb_port); - set_debug_traps(); - breakpoint(); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include <linux/delay.h> - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void bcm1480_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat.irqs[smp_processor_id()][kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void bcm1480_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void) bcm1480_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) - bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */ -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index fd9604d5555a..3de30f79db3f 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -59,10 +59,6 @@ int cfe_cons_handle; extern unsigned long initrd_start, initrd_end; #endif -#ifdef CONFIG_KGDB -extern int kgdb_port; -#endif - static void __noreturn cfe_linux_exit(void *arg) { int warm = *(int *)arg; @@ -246,9 +242,6 @@ void __init prom_init(void) int argc = fw_arg0; char **envp = (char **) fw_arg2; int *prom_vec = (int *) fw_arg3; -#ifdef CONFIG_KGDB - char *arg; -#endif _machine_restart = cfe_linux_restart; _machine_halt = cfe_linux_halt; @@ -309,13 +302,6 @@ void __init prom_init(void) } } -#ifdef CONFIG_KGDB - if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL) - kgdb_port = (arg[10] == '0') ? 0 : 1; - else - kgdb_port = 1; -#endif - #ifdef CONFIG_BLK_DEV_INITRD { char *ptr; diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index eac9065ffe0c..a5158483986e 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ldt_eoi_space; #endif -#ifdef CONFIG_KGDB -static int kgdb_irq; - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip sb1250_irq_type = { .name = "SB1250-IMR", .ack = ack_sb1250_irq, @@ -313,55 +303,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - __raw_writeq(M_DUART_IMR_BRK, - IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, - R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq << 3))); - sb1250_unmask_irq(0, kgdb_irq); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include <linux/delay.h> - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void sb1250_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat_this_cpu.irqs[kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void sb1250_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void) sb1250_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ - sb1250_kgdb_interrupt(); -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); else diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 255d692bfa18..f18ba9201bbc 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,4 +1,3 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c deleted file mode 100644 index b97ae3048482..000000000000 --- a/arch/mips/sibyte/swarm/dbg_io.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * kgdb debug routines for SiByte boards. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* -------------------- BEGINNING OF CONFIG --------------------- */ - -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/sibyte/sb1250.h> -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_uart.h> -#include <asm/sibyte/sb1250_int.h> -#include <asm/addrspace.h> - -/* - * We use the second serial port for kgdb traffic. - * 115200, 8, N, 1. - */ - -#define BAUD_RATE 115200 -#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE) -#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */ -#define PARITY V_DUART_PARITY_MODE_NONE /* or even */ -#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */ - -static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */ - -/* -------------------- END OF CONFIG --------------------- */ -extern int kgdb_port; - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -void putDebugChar(unsigned char c); -unsigned char getDebugChar(void); -static void -duart_init(int clk_divisor, int data, int parity, int stop) -{ - duart_out(R_DUART_MODE_REG_1, data | parity); - duart_out(R_DUART_MODE_REG_2, stop); - duart_out(R_DUART_CLK_SEL, clk_divisor); - - duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */ -} - -void -putDebugChar(unsigned char c) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0); - duart_out(R_DUART_TX_HOLD, c); -} - -unsigned char -getDebugChar(void) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ; - return duart_in(R_DUART_RX_HOLD); -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 6de4c5aa92be..840fe757c48d 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,3 +1,27 @@ +config MACH_TX39XX + bool + select MACH_TXX9 + select SYS_HAS_CPU_TX39XX + +config MACH_TX49XX + bool + select MACH_TXX9 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_64BIT_KERNEL + +config MACH_TXX9 + bool + select DMA_NONCOHERENT + select SWAP_IO_SPACE + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" depends on MACH_TX39XX @@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938 config SOC_TX3927 bool select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4927 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4938 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 select I8259 config PICMG_PCI_BACKPLANE_DEFAULT bool "Support for PICMG PCI Backplane" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9c120771e65f..9bb34af26b73 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -4,9 +4,9 @@ obj-y += setup.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += dbgio.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c deleted file mode 100644 index 33b9c672a322..000000000000 --- a/arch/mips/txx9/generic/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp> - */ - -#include <linux/types> - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c new file mode 100644 index 000000000000..c683f593eda2 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx3927.c @@ -0,0 +1,25 @@ +/* + * Common tx3927 irq handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#include <linux/init.h> +#include <asm/txx9irq.h> +#include <asm/txx9/tx3927.h> + +void __init tx3927_irq_init(void) +{ + int i; + + txx9_irq_init(TX3927_IRC_REG); + /* raise priority for timers, sio */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_irq_set_pri(TX3927_IR_TMR(i), 6); + for (i = 0; i < TX3927_NR_SIO; i++) + txx9_irq_set_pri(TX3927_IR_SIO(i), 7); +} diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 0b92d8c13208..7b637a7c0e66 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return txx9_board_vec->pci_map_irq(dev, slot, pin); } + +char * (*txx9_board_pcibios_setup)(char *str) __devinitdata; + +char *__devinit txx9_pcibios_setup(char *str) +{ + if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) + return NULL; + if (!strcmp(str, "picmg")) { + /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX + (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ + txx9_pci_option |= TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strcmp(str, "nopicmg")) { + /* non-PICMG compliant backplane (TOSHIBA + RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ + txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strncmp(str, "clk=", 4)) { + char *val = str + 4; + txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; + if (strcmp(val, "33") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_33; + else if (strcmp(val, "66") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_66; + else /* "auto" */ + txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; + return NULL; + } else if (!strncmp(str, "err=", 4)) { + if (!strcmp(str + 4, "panic")) + txx9_pci_err_action = TXX9_PCI_ERR_PANIC; + else if (!strcmp(str + 4, "ignore")) + txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; + return NULL; + } + return str; +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 8c60c78b9a9e..1bc57d0f4c5c 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -20,9 +20,13 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> #include <asm/bootinfo.h> #include <asm/time.h> +#include <asm/reboot.h> #include <asm/txx9/generic.h> +#include <asm/txx9/pci.h> #ifdef CONFIG_CPU_TX49XX #include <asm/txx9/tx4938.h> #endif @@ -187,6 +191,117 @@ char * __init prom_getcmdline(void) return &(arcs_cmdline[0]); } +static void __noreturn txx9_machine_halt(void) +{ + local_irq_disable(); + clear_c0_status(ST0_IM); + while (1) { + if (cpu_wait) { + (*cpu_wait)(); + if (cpu_has_counter) { + /* + * Clear counter interrupt while it + * breaks WAIT instruction even if + * masked. + */ + write_c0_compare(0); + } + } + } +} + +/* Watchdog support */ +void __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + platform_device_register_simple("txx9wdt", -1, &res, 1); +} + +/* SPI support */ +void __init txx9_spi_init(int busid, unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("spi_txx9", busid, + res, ARRAY_SIZE(res)); +} + +void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr) +{ + struct platform_device *pdev = + platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, ethaddr, 6) || + platform_device_add(pdev)) + platform_device_put(pdev); +} + +void __init txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts) +{ +#ifdef CONFIG_SERIAL_TXX9 + struct uart_port req; + + memset(&req, 0, sizeof(req)); + req.line = line; + req.iotype = UPIO_MEM; + req.membase = ioremap(baseaddr, 0x24); + req.mapbase = baseaddr; + req.irq = irq; + if (!nocts) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + if (sclk) { + req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/; + req.uartclk = sclk; + } else + req.uartclk = TXX9_IMCLK; + early_serial_txx9_setup(&req); +#endif /* CONFIG_SERIAL_TXX9 */ +} + +#ifdef CONFIG_EARLY_PRINTK +static void __init null_prom_putchar(char c) +{ +} +void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar; + +void __init prom_putchar(char c) +{ + txx9_prom_putchar(c); +} + +static void __iomem *early_txx9_sio_port; + +static void __init early_txx9_sio_putchar(char c) +{ +#define TXX9_SICISR 0x0c +#define TXX9_SITFIFO 0x1c +#define TXX9_SICISR_TXALS 0x00000002 + while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) & + TXX9_SICISR_TXALS)) + ; + __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO); +} + +void __init txx9_sio_putchar_init(unsigned long baseaddr) +{ + early_txx9_sio_port = ioremap(baseaddr, 0x24); + txx9_prom_putchar = early_txx9_sio_putchar; +} +#endif /* CONFIG_EARLY_PRINTK */ + /* wrappers */ void __init plat_mem_setup(void) { @@ -194,6 +309,15 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; /* no limit */ iomem_resource.start = 0; iomem_resource.end = ~0UL; /* no limit */ + + /* fallback restart/halt routines */ + _machine_restart = (void (*)(char *))txx9_machine_halt; + _machine_halt = txx9_machine_halt; + pm_power_off = txx9_machine_halt; + +#ifdef CONFIG_PCI + pcibios_plat_setup = txx9_pcibios_setup; +#endif txx9_board_vec->mem_setup(); } diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c new file mode 100644 index 000000000000..7bd963d37fc3 --- /dev/null +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -0,0 +1,130 @@ +/* + * TX3927 setup routines + * Based on linux/arch/mips/txx9/jmr3927/setup.c + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/param.h> +#include <linux/io.h> +#include <asm/mipsregs.h> +#include <asm/txx9irq.h> +#include <asm/txx9tmr.h> +#include <asm/txx9pio.h> +#include <asm/txx9/generic.h> +#include <asm/txx9/tx3927.h> + +void __init tx3927_wdt_init(void) +{ + txx9_wdt_init(TX3927_TMR_REG(2)); +} + +void __init tx3927_setup(void) +{ + int i; + unsigned int conf; + + /* don't enable - see errata */ + txx9_ccfg_toeon = 0; + if (strstr(prom_getcmdline(), "toeon") != NULL) + txx9_ccfg_toeon = 1; + + txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, + TX3927_REG_SIZE); + + /* SDRAMC,ROMC are configured by PROM */ + for (i = 0; i < 8; i++) { + if (!(tx3927_romcptr->cr[i] & 0x8)) + continue; /* disabled */ + txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); + } + + /* clocks */ + txx9_gbus_clock = txx9_cpu_clock / 2; + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + /* enable Timeout BusError */ + if (txx9_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + if (read_c0_conf() & TX39_CONF_WBON) + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + else + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + + printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + + /* PIO */ + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk(KERN_INFO "TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk(KERN_INFO "TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); + else + printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); +} + +void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) +{ + txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr), + TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr), + TXX9_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK); +} + +void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask) +{ + int i; + + for (i = 0; i < 2; i++) + txx9_sio_init(TX3927_SIO_REG(i), + TXX9_IRQ_BASE + TX3927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 89d6e28add93..f80d4b7a694d 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/serial_core.h> #include <linux/param.h> #include <asm/txx9irq.h> #include <asm/txx9tmr.h> @@ -21,7 +20,7 @@ #include <asm/txx9/generic.h> #include <asm/txx9/tx4927.h> -void __init tx4927_wdr_init(void) +static void __init tx4927_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4927_ccfg_set(TX4927_CCFG_WDRST); @@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void) tx4927_ccfg_set(TX4927_CCFG_WR); } +void __init tx4927_wdt_init(void) +{ + txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) @@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4927_setup_serial(void) +void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; - - for (i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i); - req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); - } -#endif /* CONFIG_SERIAL_TXX9 */ + + for (i = 0; i < 2; i++) + txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 317378d8579d..f3040b9ba059 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/serial_core.h> #include <linux/param.h> #include <asm/txx9irq.h> #include <asm/txx9tmr.h> @@ -21,7 +20,7 @@ #include <asm/txx9/generic.h> #include <asm/txx9/tx4938.h> -void __init tx4938_wdr_init(void) +static void __init tx4938_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4938_ccfg_set(TX4938_CCFG_WDRST); @@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void) tx4938_ccfg_set(TX4938_CCFG_WR); } +void __init tx4938_wdt_init(void) +{ + txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; @@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4938_setup_serial(void) +void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; unsigned int ch_mask = 0; if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL) @@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void) for (i = 0; i < 2; i++) { if ((1 << i) & ch_mask) continue; - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i); - req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); + txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } -#endif /* CONFIG_SERIAL_TXX9 */ +} + +void __init tx4938_spi_init(int busid) +{ + txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SPI); +} + +void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ + u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg); + + if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0); + if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1); } diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index 69e487467fa5..a2b2d62d88e3 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -15,8 +15,6 @@ #include <asm/io.h> #include <asm/txx9/smsc_fdc37m81x.h> -#define DEBUG - /* Common Registers */ #define SMSC_FDC37M81X_CONFIG_INDEX 0x00 #define SMSC_FDC37M81X_CONFIG_DATA 0x01 @@ -55,7 +53,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -static unsigned long g_smsc_fdc37m81x_base = 0; +static unsigned long g_smsc_fdc37m81x_base; static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) { @@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) u8 chip_id; if (g_smsc_fdc37m81x_base) - printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n", + __func__, field, g_smsc_fdc37m81x_base); g_smsc_fdc37m81x_base = port; @@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } @@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) } #ifdef DEBUG -void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg) { - printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n", + key, dev, reg, smsc_fdc37m81x_rd(reg)); } void smsc_fdc37m81x_config_dump(void) { u8 orig; - char *fname = "smsc_fdc37m81x_config_dump()"; + const char *fname = __func__; smsc_fdc37m81x_config_beg(); orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); - printk("%s: common\n", fname); + printk(KERN_INFO "%s: common\n", fname); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_DNUM); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, @@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void) smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_PMGT); - printk("%s: keyboard\n", fname); + printk(KERN_INFO "%s: keyboard\n", fname); smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, SMSC_FDC37M81X_ACTIVE); diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index ba292c945669..20d61ac543e5 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -3,6 +3,5 @@ # obj-y += prom.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 070c9a115e57..6ec626c9473f 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -30,15 +30,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> -#include <linux/sched.h> #include <linux/types.h> #include <linux/interrupt.h> #include <asm/io.h> #include <asm/mipsregs.h> -#include <asm/system.h> - -#include <asm/processor.h> #include <asm/txx9/generic.h> #include <asm/txx9/jmr3927.h> @@ -46,13 +42,6 @@ #error JMR3927_IRQ_END > NR_IRQS #endif -static unsigned char irc_level[TX3927_NUM_IR] = { - 5, 5, 5, 5, 5, 5, /* INT[5:0] */ - 7, 7, /* SIO */ - 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ - 6, 6, 6 /* TMR */ -}; - /* * CP0_STATUS is a thread's resource (saved/restored on context switch). * So disable_irq/enable_irq MUST handle IOC/IRC registers. @@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending) return irq; } -#ifdef CONFIG_PCI -static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); - printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", - tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); - - return IRQ_HANDLED; -} -static struct irqaction pcierr_action = { - .handler = jmr3927_pcierr_interrupt, - .mask = CPU_MASK_NONE, - .name = "PCI error", +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, }; -#endif - -static void __init jmr3927_irq_init(void); void __init jmr3927_irq_setup(void) { + int i; + txx9_irq_dispatch = jmr3927_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ @@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void) /* clear PCI Reset interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - jmr3927_irq_init(); + tx3927_irq_init(); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); /* setup IOC interrupt 1 (PCI, MODEM) */ set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); - -#ifdef CONFIG_PCI - setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); -#endif - - /* enable all CPU interrupt bits. */ - set_c0_status(ST0_IM); /* IE bit is still 0. */ -} - -static struct irq_chip jmr3927_irq_ioc = { - .name = "jmr3927_ioc", - .ack = mask_irq_ioc, - .mask = mask_irq_ioc, - .mask_ack = mask_irq_ioc, - .unmask = unmask_irq_ioc, -}; - -static void __init jmr3927_irq_init(void) -{ - u32 i; - - txx9_irq_init(TX3927_IRC_REG); - for (i = 0; i < TXx9_MAX_IR; i++) - txx9_irq_set_pri(i, irc_level[i]); - for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); } diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c deleted file mode 100644 index 5bd757e56f79..000000000000 --- a/arch/mips/txx9/jmr3927/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/txx9/jmr3927.h> - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 2cadb423face..70c4c8ec3e84 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -36,41 +36,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> +#include <linux/kernel.h> #include <asm/bootinfo.h> #include <asm/txx9/generic.h> #include <asm/txx9/jmr3927.h> -#define TIMEOUT 0xffffff - -void -prom_putchar(char c) -{ - int i = 0; - - do { - i++; - if (i>TIMEOUT) - break; - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = c; - return; -} - -void -puts(const char *cp) -{ - while (*cp) - prom_putchar(*cp++); - prom_putchar('\r'); - prom_putchar('\n'); -} - void __init jmr3927_prom_init(void) { /* CCFG */ if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); + printk(KERN_ERR "TX3927 TLB off\n"); prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); + txx9_sio_putchar_init(TX3927_SIO_REG(1)); } diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 03647ebe4130..87db41be8a56 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -32,27 +32,18 @@ #include <linux/types.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/pm.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#ifdef CONFIG_SERIAL_TXX9 -#include <linux/serial_core.h> -#endif -#include <asm/txx9tmr.h> -#include <asm/txx9pio.h> #include <asm/reboot.h> +#include <asm/txx9pio.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> #include <asm/txx9/jmr3927.h> #include <asm/mipsregs.h> -extern void puts(const char *cp); - -/* don't enable - see errata */ -static int jmr3927_ccfg_toeon; - -static inline void do_reset(void) +static void jmr3927_machine_restart(char *command) { + local_irq_disable(); #if 1 /* Resetting PCI bus */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); @@ -61,33 +52,13 @@ static inline void do_reset(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); #endif jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); -} - -static void jmr3927_machine_restart(char *command) -{ - local_irq_disable(); - puts("Rebooting..."); - do_reset(); -} - -static void jmr3927_machine_halt(void) -{ - puts("JMR-TX3927 halted.\n"); - while (1); -} - -static void jmr3927_machine_power_off(void) -{ - puts("JMR-TX3927 halted. Please turn off the power.\n"); - while (1); + /* fallback */ + (*_machine_halt)(); } static void __init jmr3927_time_init(void) { - txx9_clockevent_init(TX3927_TMR_REG(0), - TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), - JMR3927_IMCLK); - txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); + tx3927_time_init(0, 1); } #define DO_WRITE_THROUGH @@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void) set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); _machine_restart = jmr3927_machine_restart; - _machine_halt = jmr3927_machine_halt; - pm_power_off = jmr3927_machine_power_off; - - /* Reboot on panic */ - panic_timeout = 180; /* cache setup */ { @@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void) #endif conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | + TX39_CONF_WBON | TX39_CONF_CWFON); conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; conf |= mips_config_wbon ? TX39_CONF_WBON : 0; @@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void) /* initialize board */ jmr3927_board_init(); - argptr = prom_getcmdline(); - - if ((argptr = strstr(argptr, "toeon")) != NULL) - jmr3927_ccfg_toeon = 1; - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "ip=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " ip=bootp"); - } - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = i == 0 ? - JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; - if (i == 0) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = JMR3927_IMCLK; - early_serial_txx9_setup(&req); - } - } + tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */ #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) strcat(argptr, " console=ttyS1,115200"); - } -#endif #endif } -static void tx3927_setup(void); - static void __init jmr3927_pci_setup(void) { #ifdef CONFIG_PCI @@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); } tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); + tx3927_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } static void __init jmr3927_board_init(void) { - tx3927_setup(); - jmr3927_pci_setup(); - - /* SIO0 DTR on */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); - - jmr3927_led_set(0); - - printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", - jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, - jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_dipsw1(), jmr3927_dipsw2(), - jmr3927_dipsw3(), jmr3927_dipsw4()); -} - -static void __init tx3927_setup(void) -{ - int i; - txx9_cpu_clock = JMR3927_CORECLK; - txx9_gbus_clock = JMR3927_GBUSCLK; /* SDRAMC are configured by PROM */ /* ROMC */ @@ -233,74 +148,32 @@ static void __init tx3927_setup(void) tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; - /* CCFG */ - /* enable Timeout BusError */ - if (jmr3927_ccfg_toeon) - tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; - - /* clear BusErrorOnWrite flag */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; - /* Disable PCI snoop */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; - /* do reset on watchdog */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; - -#ifdef DO_WRITE_THROUGH - /* Enable PCI SNOOP - with write through only */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; -#endif - /* Pin selection */ tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; tx3927_ccfgptr->pcfg |= TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); - printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", - tx3927_ccfgptr->crir, - tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - - /* TMR */ - for (i = 0; i < TX3927_NR_TMR; i++) - txx9_tmr_init(TX3927_TMR_REG(i)); - - /* DMA */ - tx3927_dmaptr->mcr = 0; - for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { - /* reset channel */ - tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; - tx3927_dmaptr->ch[i].ccr = 0; - } - /* enable DMA */ -#ifdef __BIG_ENDIAN - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; -#else - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; -#endif + tx3927_setup(); - /* PIO */ /* PIO[15:12] connected to LEDs */ __raw_writel(0x0000f000, &tx3927_pioptr->dir); - __raw_writel(0, &tx3927_pioptr->maskcpu); - __raw_writel(0, &tx3927_pioptr->maskext); - txx9_gpio_init(TX3927_PIO_REG, 0, 16); gpio_request(11, "dipsw1"); gpio_request(10, "dipsw2"); - { - unsigned int conf; - conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk("TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk("TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk("TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk("TX3927 D-Cache WriteBack.\n"); - else - printk("TX3927 D-Cache WriteBack (CWF) .\n"); - } + jmr3927_pci_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk(KERN_INFO + "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); } /* This trick makes rtc-ds1742 driver usable as is. */ @@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port) #endif } -static int __init jmr3927_rtc_init(void) +static void __init jmr3927_rtc_init(void) { static struct resource __initdata res = { .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev; - dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init jmr3927_wdt_init(void) -{ - return txx9_wdt_init(TX3927_TMR_REG(2)); + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } static void __init jmr3927_device_init(void) { __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); - jmr3927_wdt_init(); + tx3927_wdt_init(); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index cd748a930328..00cd5231da30 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -27,85 +27,86 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* -IRQ Device -00 RBTX4927-ISA/00 -01 RBTX4927-ISA/01 PS2/Keyboard -02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) -03 RBTX4927-ISA/03 -04 RBTX4927-ISA/04 -05 RBTX4927-ISA/05 -06 RBTX4927-ISA/06 -07 RBTX4927-ISA/07 -08 RBTX4927-ISA/08 -09 RBTX4927-ISA/09 -10 RBTX4927-ISA/10 -11 RBTX4927-ISA/11 -12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) -13 RBTX4927-ISA/13 -14 RBTX4927-ISA/14 IDE -15 RBTX4927-ISA/15 - -16 TX4927-CP0/00 Software 0 -17 TX4927-CP0/01 Software 1 -18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use -23 TX4927-CP0/07 CPU TIMER - -24 TX4927-PIC/00 -25 TX4927-PIC/01 -26 TX4927-PIC/02 -27 TX4927-PIC/03 Cascade RBTX4927-IOC -28 TX4927-PIC/04 -29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet -30 TX4927-PIC/06 -31 TX4927-PIC/07 -32 TX4927-PIC/08 TX4927 SerialIO Channel 0 -33 TX4927-PIC/09 TX4927 SerialIO Channel 1 -34 TX4927-PIC/10 -35 TX4927-PIC/11 -36 TX4927-PIC/12 -37 TX4927-PIC/13 -38 TX4927-PIC/14 -39 TX4927-PIC/15 -40 TX4927-PIC/16 TX4927 PCI PCI-C -41 TX4927-PIC/17 -42 TX4927-PIC/18 -43 TX4927-PIC/19 -44 TX4927-PIC/20 -45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR -47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) -48 TX4927-PIC/24 -49 TX4927-PIC/25 -50 TX4927-PIC/26 -51 TX4927-PIC/27 -52 TX4927-PIC/28 -53 TX4927-PIC/29 -54 TX4927-PIC/30 -55 TX4927-PIC/31 - -56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] -57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] -58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] -59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] -60 RBTX4927-IOC/04 -61 RBTX4927-IOC/05 -62 RBTX4927-IOC/06 -63 RBTX4927-IOC/07 - -NOTES: -SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 -SouthBridge/ISA/pin=0 no pci irq used by this device -SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 -SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 -SouthBridge/PMC/pin=0 no pci irq used by this device -SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 -SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) -JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 -*/ + * I8259A_IRQ_BASE+00 + * I8259A_IRQ_BASE+01 PS2/Keyboard + * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15) + * I8259A_IRQ_BASE+03 + * I8259A_IRQ_BASE+04 + * I8259A_IRQ_BASE+05 + * I8259A_IRQ_BASE+06 + * I8259A_IRQ_BASE+07 + * I8259A_IRQ_BASE+08 + * I8259A_IRQ_BASE+09 + * I8259A_IRQ_BASE+10 + * I8259A_IRQ_BASE+11 + * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time) + * I8259A_IRQ_BASE+13 + * I8259A_IRQ_BASE+14 IDE + * I8259A_IRQ_BASE+15 + * + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 + * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet + * TXX9_IRQ_BASE+06 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0 + * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1 + * TXX9_IRQ_BASE+10 + * TXX9_IRQ_BASE+11 + * TXX9_IRQ_BASE+12 + * TXX9_IRQ_BASE+13 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C + * TXX9_IRQ_BASE+17 + * TXX9_IRQ_BASE+18 + * TXX9_IRQ_BASE+19 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR + * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used) + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 + * + * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge) + * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge) + * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR) + * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4) + * RBTX4927_IRQ_IOC+04 + * RBTX4927_IRQ_IOC+05 + * RBTX4927_IRQ_IOC+06 + * RBTX4927_IRQ_IOC+07 + * + * NOTES: + * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 + * SouthBridge/ISA/pin=0 no pci irq used by this device + * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR + * via ISA IRQ14 + * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 + * SouthBridge/PMC/pin=0 no pci irq used by this device + * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 + * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) + * JP7 is not bus master -- do NOT use -- only 4 pci bus master's + * allowed -- SouthBridge, JP4, JP5, JP6 + */ #include <linux/init.h> #include <linux/types.h> @@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq) level3 = readb(rbtx4927_imstat_addr) & 0x1f; if (level3) sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; - return (sw_irq); + return sw_irq; } static void __init toshiba_rbtx4927_irq_ioc_init(void) diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 5c0de54ebdd2..1dc0a5b1956b 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void) { prom_init_cmdline(); add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 3da20ea3e55c..0d39bafea794 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -46,12 +46,9 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/pm.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/processor.h> #include <asm/reboot.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> @@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void) tx4927_report_pciclk(); tx4927_pcic_setup(tx4927_pcicptr, c, extarb); } + tx4927_setup_pcierr_irq(); } static void __init tx4937_pci_setup(void) @@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void) tx4938_report_pciclk(); tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } + tx4938_setup_pcierr_irq(); } static void __init rbtx4927_arch_init(void) @@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void) #define rbtx4937_arch_init NULL #endif /* CONFIG_PCI */ -static void __noreturn wait_forever(void) -{ - while (1) - if (cpu_wait) - (*cpu_wait)(); -} - static void toshiba_rbtx4927_restart(char *command) { - printk(KERN_NOTICE "System Rebooting...\n"); - /* enable the s/w reset register */ writeb(1, rbtx4927_softresetlock_addr); @@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command) /* do a s/w reset */ writeb(1, rbtx4927_softreset_addr); - /* do something passive while waiting for reset */ - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_power_off(void) -{ - toshiba_rbtx4927_halt(); - /* no return */ + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4927_clock_init(void); @@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void) u32 cp0_config; char *argptr; - /* f/w leaves this on at startup */ - clear_c0_status(ST0_ERL); - /* enable caches -- HCP5 does this, pmon does not */ cp0_config = read_c0_config(); cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); @@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void) } _machine_restart = toshiba_rbtx4927_restart; - _machine_halt = toshiba_rbtx4927_halt; - pm_power_off = toshiba_rbtx4927_power_off; #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif - tx4927_setup_serial(); + tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif - -#ifdef CONFIG_ROOT_NFS - argptr = prom_getcmdline(); - if (strstr(argptr, "root=") == NULL) { - strcat(argptr, " root=/dev/nfs rw"); - } -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif } @@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void) tx4927_time_init(0); } -static int __init toshiba_rbtx4927_rtc_init(void) +static void __init toshiba_rbtx4927_rtc_init(void) { struct resource res = { .start = RBTX4927_BRAMRTC_BASE - IO_BASE, .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev = - platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } -static int __init rbtx4927_ne_init(void) +static void __init rbtx4927_ne_init(void) { struct resource res[] = { { @@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4927_wdt_init(void) -{ - return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); rbtx4927_ne_init(); - rbtx4927_wdt_init(); + tx4927_wdt_init(); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index 3971a061657a..ca2f8306ce93 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -11,59 +11,57 @@ */ /* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC + * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 TX4938 ETH1 + * TXX9_IRQ_BASE+06 TX4938 ETH0 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4938 SIO 0 + * TXX9_IRQ_BASE+09 TX4938 SIO 1 + * TXX9_IRQ_BASE+10 TX4938 DMA0 + * TXX9_IRQ_BASE+11 TX4938 DMA1 + * TXX9_IRQ_BASE+12 TX4938 DMA2 + * TXX9_IRQ_BASE+13 TX4938 DMA3 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4938 PCIC + * TXX9_IRQ_BASE+17 TX4938 TMR0 + * TXX9_IRQ_BASE+18 TX4938 TMR1 + * TXX9_IRQ_BASE+19 TX4938 TMR2 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4938 PCIERR + * TXX9_IRQ_BASE+23 + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 TX4938 SPI + * + * RBTX4938_IRQ_IOC+00 PCI-D + * RBTX4938_IRQ_IOC+01 PCI-C + * RBTX4938_IRQ_IOC+02 PCI-B + * RBTX4938_IRQ_IOC+03 PCI-A + * RBTX4938_IRQ_IOC+04 RTC + * RBTX4938_IRQ_IOC+05 ATA + * RBTX4938_IRQ_IOC+06 MODEM + * RBTX4938_IRQ_IOC+07 SWINT + */ #include <linux/init.h> #include <linux/interrupt.h> #include <asm/mipsregs.h> @@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq) return sw_irq; } -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ static void __init toshiba_rbtx4938_irq_ioc_init(void) { diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index ee189519ce5a..d73123cd2ab9 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void) prom_init_cmdline(); #endif add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 6c2b99bb8af6..9ab48dec0fe8 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -13,9 +13,6 @@ #include <linux/types.h> #include <linux/ioport.h> #include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/console.h> -#include <linux/pm.h> #include <linux/platform_device.h> #include <linux/gpio.h> @@ -28,33 +25,14 @@ #include <asm/txx9/spi.h> #include <asm/txx9pio.h> -static void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -static void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - static void rbtx4938_machine_restart(char *command) { local_irq_disable(); - - printk("Rebooting..."); writeb(1, rbtx4938_softresetlock_addr); writeb(1, rbtx4938_sfvol_addr); writeb(1, rbtx4938_softreset_addr); - while(1) - ; + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4938_pci_setup(void) @@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void) register_pci_controller(c); tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); } + tx4938_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } @@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void) if (sum) printk(KERN_WARNING "seeprom: bad checksum.\n"); } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } + tx4938_ethaddr_init(&dat[4], &dat[4 + 6]); #endif /* CONFIG_PCI */ return 0; } @@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void) #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(RBTX4938_ETHER_BASE); #endif - tx4938_setup_serial(); + tx4938_sio_init(7372800, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); + printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); + printk(KERN_INFO "PIOSEL: enabling nand selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); + printk(KERN_INFO "PIOSEL: enabling ata selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ @@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void) rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); + printk(KERN_ERR "request resource for fpga failed\n"); _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; writeb(0xff, rbtx4938_led_addr); printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", @@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void) readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); } -static int __init rbtx4938_ne_init(void) +static void __init rbtx4938_ne_init(void) { struct resource res[] = { { @@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); @@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = { .ngpio = 3, }; -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - static int __init rbtx4938_spi_init(void) { struct spi_board_info srtc_info = { @@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + tx4938_spi_init(0); return 0; } @@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void) rbtx4938_spi_init(); } -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} - static void __init rbtx4938_device_init(void) { rbtx4938_ethaddr_init(); rbtx4938_ne_init(); - rbtx4938_wdt_init(); + tx4938_wdt_init(); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 587da5e0990f..63c9cafda9c4 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,6 +42,9 @@ config GENERIC_HARDIRQS bool default y +config HAVE_GET_USER_PAGES_FAST + def_bool PPC64 + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 7345743d3d96..fbc930410ff6 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <132000000>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index e74c045a0f8c..b157d1885a28 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -51,6 +51,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 8dfab5662585..700e076ef3f5 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -52,6 +52,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 49ca3497eefb..cdd3063258ea 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -50,6 +50,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index ba586cb7afbb..783241c00240 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -57,6 +57,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 3701dae1ee02..a3b76a709951 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -61,6 +61,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <264000000>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 8acd1d6577f2..89c9202f8bd7 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -149,18 +149,14 @@ }; crypto@30000 { - compatible = "fsl,sec2-crypto"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 8>; + interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x7e>; - /* - * desc mask is for rev1.x, we need runtime fixup - * for >=2.x - */ - descriptor-types-mask = <0x1010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: interrupt-controller@700 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 0a700cb5f611..432782b6d20a 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 29c8c76a58f7..ed32c8ddafe3 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index d641a8985ea3..f4db9ed4a301 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 02cfa24a1695..1505d6855eff 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -49,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index f2273a872b11..9568bfaff8f7 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index c4469f19ff82..6480f4fd96e0 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 7d3829d3495e..f1fb20737e3e 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d84466bb7eca..431b496270dc 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -58,6 +58,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index e03a78006283..d833a5c4f476 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index ba8159de040b..4d1f2f284094 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x200>; bus-frequency = <330000000>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 9c30a34821dc..a15f10343f53 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -60,6 +60,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 08c61e3daecc..e124dd18fb5a 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 9f856a0c3e38..1a09719c7628 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } else if (retval == H_PARAMETER) { retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __func__, retval); - retval = -EIO; } return retval; diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 6b66cd85b433..3635be61f899 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset, flush_vsx_to_thread(target); for (i = 0; i < 32 ; i++) - buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET]; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); @@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); for (i = 0; i < 32 ; i++) - current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; return ret; @@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_GETVSRREGS: return copy_regset_to_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (void __user *) data); case PTRACE_SETVSRREGS: return copy_regset_from_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (const void __user *) data); #endif #ifdef CONFIG_SPE diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 67bf1a1e7e14..197d49c790ad 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case PTRACE_SETFPREGS: case PTRACE_GETVRREGS: case PTRACE_SETVRREGS: + case PTRACE_GETVSRREGS: + case PTRACE_SETVSRREGS: case PTRACE_GETREGS64: case PTRACE_SETREGS64: case PPC_PTRACE_GETFPREGS: diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 1c00e0196f6c..e7392b45a5ef 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -12,7 +12,8 @@ obj-y := fault.o mem.o \ mmu_context_$(CONFIG_WORD_SIZE).o hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += hash_utils_64.o \ - slb_low.o slb.o stab.o mmap.o $(hash-y) + slb_low.o slb.o stab.o \ + gup.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c new file mode 100644 index 000000000000..9fdf4d6335e4 --- /dev/null +++ b/arch/powerpc/mm/gup.c @@ -0,0 +1,280 @@ +/* + * Lockless get_user_pages_fast for powerpc + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#undef DEBUG + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <linux/vmstat.h> +#include <linux/pagemap.h> +#include <linux/rwsem.h> +#include <asm/pgtable.h> + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask, result; + pte_t *ptep; + + result = _PAGE_PRESENT|_PAGE_USER; + if (write) + result |= _PAGE_RW; + mask = result | _PAGE_SPECIAL; + + ptep = pte_offset_kernel(&pmd, addr); + do { + pte_t pte = *ptep; + struct page *page; + + if ((pte_val(pte) & mask) != result) + return 0; + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + if (!page_cache_get_speculative(page)) + return 0; + if (unlikely(pte != *ptep)) { + put_page(page); + return 0; + } + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + + return 1; +} + +#ifdef CONFIG_HUGETLB_PAGE +static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate, + unsigned long *addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long mask; + unsigned long pte_end; + struct page *head, *page; + pte_t pte; + int refs; + + pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate); + if (pte_end < end) + end = pte_end; + + pte = *ptep; + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (*addr += PAGE_SIZE, *addr != end); + + if (!page_cache_add_speculative(head, refs)) { + *nr -= refs; + return 0; + } + if (unlikely(pte != *ptep)) { + /* Could be optimized better */ + while (*nr) { + put_page(page); + (*nr)--; + } + } + + return 1; +} +#endif /* CONFIG_HUGETLB_PAGE */ + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + pgd_t *pgdp; + int psize, nr = 0; + unsigned int shift; + + pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, len))) + goto slow_irqon; + + pr_debug(" aligned: %lx .. %lx\n", start, end); + +#ifdef CONFIG_HUGETLB_PAGE + /* We bail out on slice boundary crossing when hugetlb is + * enabled in order to not have to deal with two different + * page table formats + */ + if (addr < SLICE_LOW_TOP) { + if (end > SLICE_LOW_TOP) + goto slow_irqon; + + if (unlikely(GET_LOW_SLICE_INDEX(addr) != + GET_LOW_SLICE_INDEX(end - 1))) + goto slow_irqon; + } else { + if (unlikely(GET_HIGH_SLICE_INDEX(addr) != + GET_HIGH_SLICE_INDEX(end - 1))) + goto slow_irqon; + } +#endif /* CONFIG_HUGETLB_PAGE */ + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables from being freed on powerpc. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the the page and take a ref on it. + */ + local_irq_disable(); + + psize = get_slice_psize(mm, addr); + shift = mmu_psize_defs[psize].shift; + +#ifdef CONFIG_HUGETLB_PAGE + if (unlikely(mmu_huge_psizes[psize])) { + pte_t *ptep; + unsigned long a = addr; + unsigned long sz = ((1UL) << shift); + struct hstate *hstate = size_to_hstate(sz); + + BUG_ON(!hstate); + /* + * XXX: could be optimized to avoid hstate + * lookup entirely (just use shift) + */ + + do { + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); + ptep = huge_pte_offset(mm, a); + pr_debug(" %016lx: huge ptep %p\n", a, ptep); + if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, + &nr)) + goto slow; + } while (a != end); + } else +#endif /* CONFIG_HUGETLB_PAGE */ + { + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); + pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd); + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + } + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + pr_debug(" slow path ! nr = %d\n", nr); + + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index dd4be4aee314..ec43477caa63 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index f049d692d4c8..0300268ce5b8 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 7301d77a08ee..76092d37c7d9 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -41,6 +41,7 @@ static struct of_device_id __initdata mpc834x_itx_ids[] = { { .compatible = "fsl,pq2pro-localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 30d509aa9f08..fc3f2ed1f3e9 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void) static struct of_device_id mpc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 75b80e836576..9d46e5bdd101 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void) static struct of_device_id mpc836x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index fc21f5c15bab..156c4e218009 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void) static struct __initdata of_device_id sbc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 2145adeb220c..8a3b117b6ce2 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, + { .type = "simple-bus", }, { .name = "cpm", }, { .name = "localbus", }, {}, diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 6b846aa1ced9..1bf5aefdfeb1 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void) static struct of_device_id __initdata mpc8536_ds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba498d6f2d02..d17807a6b89a 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 00c535806647..483b65cbabae 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void) static struct of_device_id __initdata mpc85xxds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 43a459f63e31..2494c5155919 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 2c580cd24e4f..6509ade71668 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 6fc849e51e48..71d7562e190b 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -105,6 +105,16 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1d0968775c0a..4c900efa164e 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -254,6 +254,8 @@ config CPM2 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -281,6 +283,7 @@ config FSL_ULI1575 config CPM bool + select PPC_CLOCK config OF_RTC bool diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c index 69288f653144..3233fe84d158 100644 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb, struct cpufreq_frequency_table *cbe_freqs; u8 node; + /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE + * and CPUFREQ_NOTIFY policy events?) + */ + if (event == CPUFREQ_START) + return 0; + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); node = cbe_cpu_to_node(policy->cpu); diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 661df42830b9..4a04823e8423 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -30,6 +30,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/spinlock.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h> @@ -42,6 +43,10 @@ #include <asm/fs_pd.h> +#ifdef CONFIG_8xx_GPIO +#include <linux/of_gpio.h> +#endif + #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ @@ -290,20 +295,24 @@ struct cpm_ioport16 { __be16 res[3]; }; -struct cpm_ioport32 { - __be32 dir, par, sor; +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { - struct cpm_ioport32 __iomem *iop; + struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) @@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return 0; } + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; +}; + +static inline struct cpm1_gpio16_chip * +to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); +} + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + setbits16(&iop->dir, pin_mask); + + cpm1_gpio16_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + clrbits16(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add16(struct device_node *np) +{ + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm1_gpio32_chip * +to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); +} + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm1_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add32(struct device_node *np) +{ + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") + cpm1_gpiochip_add32(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") + cpm1_gpiochip_add16(np); + + /* Port E uses CPM2 layout */ + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + +#endif /* CONFIG_8xx_GPIO */ diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 5a6c5dfc53ef..f1c3395633b9 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command); * Baud rate clocks are zero-based in the driver code (as that maps * to port numbers). Documentation uses 1-based numbering. */ -#define BRG_INT_CLK (get_brgfreq()) -#define BRG_UART_CLK (BRG_INT_CLK/16) - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -void -cpm_setbrg(uint brg, uint rate) +void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) { u32 __iomem *bp; + u32 val; /* This is good enough to get SMCs running..... */ @@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate) brg -= 4; } bp += brg; - out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); - - cpm2_unmap(bp); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -cpm2_fastbrg(uint brg, uint rate, int div16) -{ - u32 __iomem *bp; - u32 val; - - if (brg < 4) { - bp = cpm2_map_size(im_brgc1, 16); - } else { - bp = cpm2_map_size(im_brgc5, 16); - brg -= 4; - } - bp += brg; - val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; out_be32(bp, val); cpm2_unmap(bp); } +EXPORT_SYMBOL(__cpm2_setbrg); int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) { @@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags) else clrbits32(&iop[port].odr, pin); } + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b7296acb2c..53da8a079f96 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/of_device.h> +#include <linux/spinlock.h> +#include <linux/of.h> #include <asm/udbg.h> #include <asm/io.h> @@ -28,6 +30,10 @@ #include <mm/mmu_decl.h> +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) +#include <linux/of_gpio.h> +#endif + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; @@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); + +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +struct cpm2_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm2_gpio32_chip * +to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc); +} + +static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + cpm2_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm2_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm2_gpiochip_add32(struct device_node *np) +{ + struct cpm2_gpio32_chip *cpm2_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); + if (!cpm2_gc) + return -ENOMEM; + + spin_lock_init(&cpm2_gc->lock); + + mm_gc = &cpm2_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm2_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm2_gpio32_dir_in; + gc->direction_output = cpm2_gpio32_dir_out; + gc->get = cpm2_gpio32_get; + gc->set = cpm2_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} +#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */ diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index c09ddc0dbeb3..c1879ebfd4f4 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -21,6 +21,7 @@ static int __init add_rtc(void) struct device_node *np; struct platform_device *pd; struct resource res[2]; + unsigned int num_res = 1; int ret; memset(&res, 0, sizeof(res)); @@ -41,14 +42,24 @@ static int __init add_rtc(void) if (res[0].start != RTC_PORT(0)) return -EINVAL; - /* Use a fixed interrupt value of 8 since on PPC if we are using this - * its off an i8259 which we ensure has interrupt numbers 0..15. */ - res[1].start = 8; - res[1].end = 8; - res[1].flags = IORESOURCE_IRQ; + np = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "pnpPNP,000"); + if (np) { + of_node_put(np); + /* + * Use a fixed interrupt value of 8 since on PPC if we are + * using this its off an i8259 which we ensure has interrupt + * numbers 0..15. + */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + num_res++; + } pd = platform_device_register_simple("rtc_cmos", -1, - &res[0], 2); + &res[0], num_res); if (IS_ERR(pd)) return PTR_ERR(pd); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2ed88122be93..8d41908e2513 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y depends on SPARSEMEM +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + source "mm/Kconfig" comment "I/O subsystem configuration" diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index d003a6e16afb..328a20e880b5 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct compat_itimerspec * jg compat_sys_timerfd_gettime + + .globl compat_sys_signalfd4_wrapper +compat_sys_signalfd4_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_sigset_t * + llgfr %r4,%r4 # compat_size_t + lgfr %r5,%r5 # int + jg compat_sys_signalfd4 + + .globl sys_eventfd2_wrapper +sys_eventfd2_wrapper: + llgfr %r2,%r2 # unsigned int + lgfr %r3,%r3 # int + jg sys_eventfd2 + + .globl sys_inotify_init1_wrapper +sys_inotify_init1_wrapper: + lgfr %r2,%r2 # int + jg sys_inotify_init1 + + .globl sys_pipe2_wrapper +sys_pipe2_wrapper: + llgtr %r2,%r2 # u32 * + lgfr %r3,%r3 # int + jg sys_pipe2 # branch to system call + + .globl sys_dup3_wrapper +sys_dup3_wrapper: + llgfr %r2,%r2 # unsigned int + llgfr %r3,%r3 # unsigned int + lgfr %r4,%r4 # int + jg sys_dup3 # branch to system call + + .globl sys_epoll_create1_wrapper +sys_epoll_create1_wrapper: + lgfr %r2,%r2 # int + jg sys_epoll_create1 # branch to system call diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 54b2779b5e2f..2dcf590faba6 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1705,7 +1705,10 @@ void __init setup_ipl(void) void __init ipl_update_parameters(void) { - if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK) + int rc; + + rc = diag308(DIAG308_STORE, &ipl_block); + if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG)) diag308_set_works = 1; } diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c index 18ed7abe16c5..9872999c66d1 100644 --- a/arch/s390/kernel/mem_detect.c +++ b/arch/s390/kernel/mem_detect.c @@ -9,27 +9,6 @@ #include <asm/sclp.h> #include <asm/setup.h> -static int memory_fast_detect(struct mem_chunk *chunk) -{ - unsigned long val0 = 0; - unsigned long val1 = 0xc; - int rc = -EOPNOTSUPP; - - if (ipl_flags & IPL_NSS_VALID) - return -EOPNOTSUPP; - asm volatile( - " diag %1,%2,0x260\n" - "0: lhi %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc"); - - if (rc || val0 != val1) - return -EOPNOTSUPP; - chunk->size = val0 + 1; - return 0; -} - static inline int tprot(unsigned long addr) { int rc = -EFAULT; @@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[]) unsigned long flags, cr0; memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk)); - if (memory_fast_detect(&chunk[0]) == 0) - return; /* Disable IRQs, DAT and low address protection so tprot does the * right thing and we don't get scheduled away with low address * protection disabled. diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index c87ec687d4c6..c66d35e55142 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper) SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper) SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */ SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper) +SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper) +SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper) +SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) +SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ +SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) +SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ab70d9bd9261..ca114fe46ffb 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp); /* * Reset STP attachment. */ -static void stp_reset(void) +static void __init stp_reset(void) { int rc; diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index eae21a8ac72d..fc6ab6094df8 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -43,7 +43,7 @@ void __udelay(unsigned long usecs) local_bh_disable(); local_irq_save(flags); if (raw_irqs_disabled_flags(flags)) { - old_cc = S390_lowcore.clock_comparator; + old_cc = local_tick_disable(); S390_lowcore.clock_comparator = -1ULL; __ctl_store(cr0, 0, 0); dummy = (cr0 & 0xffff00e0) | 0x00000800; @@ -65,7 +65,7 @@ void __udelay(unsigned long usecs) if (raw_irqs_disabled_flags(flags)) { __ctl_load(cr0, 0, 0); - S390_lowcore.clock_comparator = old_cc; + local_tick_enable(old_cc); } if (!irq_context) _local_bh_enable(); diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 4993b0f594eb..1169130a97ef 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size) int rc; pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_NORMAL; + zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; @@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size) return rc; } #endif /* CONFIG_MEMORY_HOTPLUG */ + +#ifdef CONFIG_MEMORY_HOTREMOVE +int remove_memory(u64 start, u64 size) +{ + unsigned long start_pfn, end_pfn; + + start_pfn = PFN_DOWN(start); + end_pfn = start_pfn + PFN_DOWN(size); + return offline_pages(start_pfn, end_pfn, 120 * HZ); +} +#endif /* CONFIG_MEMORY_HOTREMOVE */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0b88dc462d73..cb992c3d6b71 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -24,6 +24,11 @@ config SUPERH32 config SUPERH64 def_bool y if CPU_SH5 +config ARCH_DEFCONFIG + string + default "arch/sh/configs/shx3_defconfig" if SUPERH32 + default "arch/sh/configs/cayman_defconfig" if SUPERH64 + config RWSEM_GENERIC_SPINLOCK def_bool y @@ -348,253 +353,10 @@ config CPU_SUBTYPE_SH5_103 endchoice source "arch/sh/mm/Kconfig" + source "arch/sh/Kconfig.cpu" -menu "Board support" - -config SOLUTION_ENGINE - bool - -config SH_SOLUTION_ENGINE - bool "SolutionEngine" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ - CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ - CPU_SUBTYPE_SH7750R - help - Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, - SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. - -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - -config SH_7721_SOLUTION_ENGINE - bool "SolutionEngine7721" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7721 - help - Select 7721 SolutionEngine if configuring for a Hitachi SH7721 - evaluation board. - -config SH_7722_SOLUTION_ENGINE - bool "SolutionEngine7722" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7722 - help - Select 7722 SolutionEngine if configuring for a Hitachi SH772 - evaluation board. - -config SH_7751_SOLUTION_ENGINE - bool "SolutionEngine7751" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7751 - help - Select 7751 SolutionEngine if configuring for a Hitachi SH7751 - evaluation board. - -config SH_7780_SOLUTION_ENGINE - bool "SolutionEngine7780" - select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7780 - help - Select 7780 SolutionEngine if configuring for a Renesas SH7780 - evaluation board. - -config SH_7343_SOLUTION_ENGINE - bool "SolutionEngine7343" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7343 - help - Select 7343 SolutionEngine if configuring for a Hitachi - SH7343 (SH-Mobile 3AS) evaluation board. - -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - -config SH_HP6XX - bool "HP6XX" - select SYS_SUPPORTS_APM_EMULATION - select HD6446X_SERIES - depends on CPU_SUBTYPE_SH7709 - help - Select HP6XX if configuring for a HP jornada HP6xx. - More information (hardware only) at - <http://www.hp.com/jornada/>. - -config SH_DREAMCAST - bool "Dreamcast" - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7091 - help - Select Dreamcast if configuring for a SEGA Dreamcast. - More information at <http://www.linux-sh.org> - -config SH_SH03 - bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - CTP/PCI-SH03 is a CPU module computer that is produced - by Interface Corporation. - More information at <http://www.interface.co.jp> - -config SH_SECUREEDGE5410 - bool "SecureEdge5410" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select SecureEdge5410 if configuring for a SnapGear SH board. - This includes both the OEM SecureEdge products as well as the - SME product line. - -config SH_RTS7751R2D - bool "RTS7751R2D" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - select IO_TRAPPED - help - Select RTS7751R2D if configuring for a Renesas Technology - Sales SH-Graphics board. - -config SH_RSK7203 - bool "RSK7203" - depends on CPU_SUBTYPE_SH7203 - -config SH_SDK7780 - bool "SDK7780R3" - depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI - help - Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 - evaluation board. - -config SH_HIGHLANDER - bool "Highlander" - depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR - bool "SH7785LCR" - depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR_29BIT_PHYSMAPS - bool "SH7785LCR 29bit physmaps" - depends on SH_SH7785LCR - default y - help - This board has 2 physical memory maps. It can be changed with - DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, - you can access all on-board device in 29bit address mode. - -config SH_MIGOR - bool "Migo-R" - depends on CPU_SUBTYPE_SH7722 - help - Select Migo-R if configuring for the SH7722 Migo-R platform - by Renesas System Solutions Asia Pte. Ltd. - -config SH_AP325RXA - bool "AP-325RXA" - depends on CPU_SUBTYPE_SH7723 - help - Renesas "AP-325RXA" support. - Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" - -config SH_SH7763RDP - bool "SH7763RDP" - depends on CPU_SUBTYPE_SH7763 - help - Select SH7763RDP if configuring for a Renesas SH7763 - evaluation board. - -config SH_EDOSK7705 - bool "EDOSK7705" - depends on CPU_SUBTYPE_SH7705 - -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - -config SH_LANDISK - bool "LANDISK" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - I-O DATA DEVICE, INC. "LANDISK Series" support. - -config SH_TITAN - bool "TITAN" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select Titan if you are configuring for a Nimble Microsystems - NetEngine NP51R. - -config SH_SHMIN - bool "SHMIN" - depends on CPU_SUBTYPE_SH7706 - select CPU_HAS_IPR_IRQ - help - Select SHMIN if configuring for the SHMIN board. - -config SH_LBOX_RE2 - bool "L-BOX RE2" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. - -config SH_X3PROTO - bool "SH-X3 Prototype board" - depends on CPU_SUBTYPE_SHX3 - -config SH_MAGIC_PANEL_R2 - bool "Magic Panel R2" - depends on CPU_SUBTYPE_SH7720 - help - Select Magic Panel R2 if configuring for Magic Panel R2. - -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI - -endmenu - -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/boards/renesas/sdk7780/Kconfig" -source "arch/sh/boards/renesas/migor/Kconfig" -source "arch/sh/boards/magicpanelr2/Kconfig" +source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c627e45c4df7..25659ce74baa 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -68,7 +68,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ defaultimage-$(CONFIG_SUPERH32) := zImage # Set some sensible Kbuild defaults -KBUILD_DEFCONFIG := r7780mp_defconfig +KBUILD_DEFCONFIG := shx3_defconfig KBUILD_IMAGE := $(defaultimage-y) # @@ -91,51 +91,34 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif -KBUILD_CFLAGS += -pipe $(cflags-y) -KBUILD_AFLAGS += $(cflags-y) - head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -core-y += arch/sh/kernel/ arch/sh/mm/ +core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ -# Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 -machdir-$(CONFIG_SH_HP6XX) += hp6xx -machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_SH03) += sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp -machdir-$(CONFIG_SH_MIGOR) += renesas/migor -machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 -machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto -machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 -machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa -machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp -machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr -machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev -machdir-$(CONFIG_SH_LANDISK) += landisk -machdir-$(CONFIG_SH_TITAN) += titan -machdir-$(CONFIG_SH_SHMIN) += shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 -machdir-$(CONFIG_SH_CAYMAN) += cayman - -incdir-y := $(notdir $(machdir-y)) +# Mach groups +machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se +machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast +machdir-$(CONFIG_SH_SH03) += mach-sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear +machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh +machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander +machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 +machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto +machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp +machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev +machdir-$(CONFIG_SH_LANDISK) += mach-landisk +machdir-$(CONFIG_SH_TITAN) += mach-titan +machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 +machdir-$(CONFIG_SH_CAYMAN) += mach-cayman ifneq ($(machdir-y),) core-y += $(addprefix arch/sh/boards/, \ @@ -145,11 +128,22 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 -cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a -cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 -cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 -cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5 +# +# CPU header paths +# +# These are ordered by optimization level. A CPU family that is a subset +# of another (ie, SH-2A / SH-2), is picked up first, with increasing +# levels of genericness if nothing more suitable is situated in the +# hierarchy. +# +# As an example, in order of preference, SH-2A > SH-2 > common definitions. +# +cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a +cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 +cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 +cpuincdir-y += cpu-common # Must be last libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) @@ -160,57 +154,17 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -ifneq ($(KBUILD_SRC),) -incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif - -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch and .mach to indicate when they were -# updated last, otherwise make uses the target directory mtime. - -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ - include/config/auto.conf FORCE - @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu - @touch $@ +cflags-y += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \ + $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) -# Most boards have their own mach directories. For the ones that -# don't, just reference the parent directory so the semantics are -# kept roughly the same. -# -# When multiple boards are compiled in at the same time, preference -# for the mach link is given to whichever has a directory for its -# headers. However, this is only a workaround until platforms that -# can live in the same kernel image back away from relying on the -# mach link. - -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ - include/config/auto.conf FORCE - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)rm -f include/asm-sh/mach - $(Q)for i in $(incdir-y); do \ - if [ -d $(srctree)/include/asm-sh/$$i ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e "include/asm-sh/$$i"; \ - ln -fsn $(incdir-prefix)$$i \ - include/asm-sh/mach; \ - else \ - if [ ! -d include/asm-sh/mach ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \ - fi; \ - fi; \ - done - @touch $@ +KBUILD_CFLAGS += -pipe $(cflags-y) +KBUILD_CPPFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h all: $(KBUILD_IMAGE) @@ -219,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ - arch/sh/lib64/syscalltab.h +archprepare: maketools arch/sh/lib64/syscalltab.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -262,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach + arch/sh/include/asm/machtypes.h diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig new file mode 100644 index 000000000000..ae194869fd60 --- /dev/null +++ b/arch/sh/boards/Kconfig @@ -0,0 +1,258 @@ +menu "Board support" + +config SOLUTION_ENGINE + bool + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R + help + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. + +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + +config SH_7722_SOLUTION_ENGINE + bool "SolutionEngine7722" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7722 + help + Select 7722 SolutionEngine if configuring for a Hitachi SH772 + evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7751 + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7780_SOLUTION_ENGINE + bool "SolutionEngine7780" + select SOLUTION_ENGINE + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 + help + Select 7780 SolutionEngine if configuring for a Renesas SH7780 + evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + depends on CPU_SUBTYPE_SH7751R + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_HP6XX + bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 + help + Select HP6XX if configuring for a HP jornada HP6xx. + More information (hardware only) at + <http://www.hp.com/jornada/>. + +config SH_DREAMCAST + bool "Dreamcast" + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at <http://www.linux-sh.org> + +config SH_SH03 + bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + CTP/PCI-SH03 is a CPU module computer that is produced + by Interface Corporation. + More information at <http://www.interface.co.jp> + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_RTS7751R2D + bool "RTS7751R2D" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + select IO_TRAPPED + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + +config SH_HIGHLANDER + bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + +config SH_MIGOR + bool "Migo-R" + depends on CPU_SUBTYPE_SH7722 + help + Select Migo-R if configuring for the SH7722 Migo-R platform + by Renesas System Solutions Asia Pte. Ltd. + +config SH_AP325RXA + bool "AP-325RXA" + depends on CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + +config SH_EDOSK7705 + bool "EDOSK7705" + depends on CPU_SUBTYPE_SH7705 + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + depends on CPU_SUBTYPE_SH4_202 + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_LANDISK + bool "LANDISK" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + +config SH_SHMIN + bool "SHMIN" + depends on CPU_SUBTYPE_SH7706 + select CPU_HAS_IPR_IRQ + help + Select SHMIN if configuring for the SHMIN board. + +config SH_LBOX_RE2 + bool "L-BOX RE2" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. + +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + +config SH_CAYMAN + bool "Hitachi Cayman" + depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI + +endmenu + +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" + +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile new file mode 100644 index 000000000000..ff9b93c5a91b --- /dev/null +++ b/arch/sh/boards/Makefile @@ -0,0 +1,8 @@ +# +# Specific board support, not covered by a mach group. +# +obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o +obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o +obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o +obj-$(CONFIG_SH_SHMIN) += board-shmin..o diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/board-ap325rxa.c index 7fa74462bd9f..9c71603d29a2 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -165,6 +165,7 @@ static struct platform_device lcdc_device = { }, }; +#ifdef CONFIG_I2C static unsigned char camera_ncm03j_magic[] = { 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, @@ -234,6 +235,7 @@ static struct platform_device camera_device = { .platform_data = &camera_info, }, }; +#endif /* CONFIG_I2C */ static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | @@ -270,7 +272,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device, &lcdc_device, &ceu_device, +#ifdef CONFIG_I2C &camera_device, +#endif }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c index f3b8b07ea5d6..f3b8b07ea5d6 100644 --- a/arch/sh/boards/magicpanelr2/setup.c +++ b/arch/sh/boards/board-magicpanelr2.c diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/board-rsk7203.c index 0bbda04b03b9..ffbedc59a973 100644 --- a/arch/sh/boards/renesas/rsk7203/setup.c +++ b/arch/sh/boards/board-rsk7203.c @@ -10,13 +10,20 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/smc911x.h> #include <asm/machvec.h> #include <asm/io.h> +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc911x_resources[] = { [0] = { .start = 0x24000000, @@ -35,6 +42,9 @@ static struct platform_device smc911x_device = { .id = -1, .num_resources = ARRAY_SIZE(smc911x_resources), .resource = smc911x_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static const char *probes[] = { "cmdlinepart", NULL }; diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/board-sh7785lcr.c index b95d674ee704..b95d674ee704 100644 --- a/arch/sh/boards/renesas/sh7785lcr/setup.c +++ b/arch/sh/boards/board-sh7785lcr.c diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c index 16e5dae8ecfb..16e5dae8ecfb 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/board-shmin.c diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile index 489a8f867368..489a8f867368 100644 --- a/arch/sh/boards/cayman/Makefile +++ b/arch/sh/boards/mach-cayman/Makefile diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index 30ec7bebfaf1..ceb37ae92c70 100644 --- a/arch/sh/boards/cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/signal.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/page.h> /* Setup for the SMSC FDC37C935 / LAN91C100FD */ diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c index a808eac4ecd6..a808eac4ecd6 100644 --- a/arch/sh/boards/cayman/led.c +++ b/arch/sh/boards/mach-cayman/led.c diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index 8c9fa472d8f5..e7f9cc5f2ff1 100644 --- a/arch/sh/boards/cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> /* * Platform Dependent Interrupt Priorities. diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile index 7b97546c7e5f..7b97546c7e5f 100644 --- a/arch/sh/boards/dreamcast/Makefile +++ b/arch/sh/boards/mach-dreamcast/Makefile diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index 9d0673a9092a..67bdc33dd411 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -12,7 +12,7 @@ #include <linux/irq.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/dreamcast/sysasic.h> +#include <mach/sysasic.h> /* Dreamcast System ASIC Hardware Events - diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c index a7433685798d..a7433685798d 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/mach-dreamcast/rtc.c diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index 2581c8cd5df7..7d944fc75e93 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -26,7 +26,7 @@ #include <asm/irq.h> #include <asm/rtc.h> #include <asm/machvec.h> -#include <asm/mach/sysasic.h> +#include <mach/sysasic.h> extern struct hw_interrupt_type systemasic_int; extern void aica_time_init(void); diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile index 14bdd531f116..14bdd531f116 100644 --- a/arch/sh/boards/renesas/edosk7705/Makefile +++ b/arch/sh/boards/mach-edosk7705/Makefile diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c index 541cea2a652f..541cea2a652f 100644 --- a/arch/sh/boards/renesas/edosk7705/io.c +++ b/arch/sh/boards/mach-edosk7705/io.c diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c index f076c45308dd..f076c45308dd 100644 --- a/arch/sh/boards/renesas/edosk7705/setup.c +++ b/arch/sh/boards/mach-edosk7705/setup.c diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index fc8f28e04ba3..fc8f28e04ba3 100644 --- a/arch/sh/boards/renesas/r7780rp/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile index 20a10080b11f..20a10080b11f 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/mach-highlander/Makefile diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c index ae1cfcb29700..ae1cfcb29700 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c index 9d3921fe27c0..9d3921fe27c0 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c index 896c045aa39d..896c045aa39d 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c index c844dfa5d58d..be8d5477fc65 100644 --- a/arch/sh/boards/renesas/r7780rp/psw.c +++ b/arch/sh/boards/mach-highlander/psw.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/mach/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/push-switch.h> static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c index bc79afb6fc4c..bc79afb6fc4c 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile index b3124278247c..b3124278247c 100644 --- a/arch/sh/boards/hp6xx/Makefile +++ b/arch/sh/boards/mach-hp6xx/Makefile diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c index 177f4f028e0d..177f4f028e0d 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c index d22f6eac9cca..e96684def788 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -13,7 +13,7 @@ #include <asm/io.h> #include <asm/hd64461.h> #include <asm/hp6xx.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #include <asm/pm.h> #define STBCR 0xffffff82 diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S index 45e9bf0b9115..44b648cf6f23 100644 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -8,7 +8,7 @@ */ #include <linux/linkage.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #define k0 r0 #define k1 r1 diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 2f414ac3c690..475b46caec1f 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -16,7 +16,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/hp6xx.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #define SCPCR 0xa4000116 #define SCPDR 0xa4000136 diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile index a696b4277fa9..a696b4277fa9 100644 --- a/arch/sh/boards/landisk/Makefile +++ b/arch/sh/boards/mach-landisk/Makefile diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index 0c15b0a50b99..25cdf7358000 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -20,8 +20,8 @@ #include <linux/fs.h> #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/landisk/gio.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/gio.h> +#include <mach-landisk/mach/iodata_landisk.h> #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index 258649491d44..7b284cde1f58 100644 --- a/arch/sh/boards/landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -16,7 +16,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c index 5a9b70b5decb..e6b0efa098d1 100644 --- a/arch/sh/boards/landisk/psw.c +++ b/arch/sh/boards/mach-landisk/psw.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> #include <asm/push-switch.h> static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 2b708ec72558..db22ea2e6d49 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -18,7 +18,7 @@ #include <linux/pm.h> #include <linux/mm.h> #include <asm/machvec.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> #include <asm/io.h> void init_landisk_IRQ(void); diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile index e9ed140c06f6..e9ed140c06f6 100644 --- a/arch/sh/boards/lboxre2/Makefile +++ b/arch/sh/boards/mach-lboxre2/Makefile diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c index 5a1c3bbe7b50..5a1c3bbe7b50 100644 --- a/arch/sh/boards/lboxre2/irq.c +++ b/arch/sh/boards/mach-lboxre2/irq.c diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index c74440d38ee9..c74440d38ee9 100644 --- a/arch/sh/boards/lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile index 1387dd6c85eb..1387dd6c85eb 100644 --- a/arch/sh/boards/superh/microdev/Makefile +++ b/arch/sh/boards/mach-microdev/Makefile diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 9f8a540f7e14..9f8a540f7e14 100644 --- a/arch/sh/boards/superh/microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c index 4d335077a3ff..4d335077a3ff 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/mach-microdev/irq.c diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c index 36e54b47a752..36e54b47a752 100644 --- a/arch/sh/boards/superh/microdev/led.c +++ b/arch/sh/boards/mach-microdev/led.c diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c index fc8cd06d66cf..fc8cd06d66cf 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/mach-microdev/setup.c diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig index a7b3b728ec3c..a7b3b728ec3c 100644 --- a/arch/sh/boards/renesas/migor/Kconfig +++ b/arch/sh/boards/mach-migor/Kconfig diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/mach-migor/Makefile index 5f231dd25c0e..5f231dd25c0e 100644 --- a/arch/sh/boards/renesas/migor/Makefile +++ b/arch/sh/boards/mach-migor/Makefile diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c index 6e9609596448..6e9609596448 100644 --- a/arch/sh/boards/renesas/migor/lcd_qvga.c +++ b/arch/sh/boards/mach-migor/lcd_qvga.c diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 7bd365ad2d06..e499ee384d58 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -304,6 +304,7 @@ static void camera_power_off(void) ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); } +#ifdef CONFIG_I2C static unsigned char camera_ov772x_magic[] = { 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, @@ -391,6 +392,7 @@ static struct platform_device migor_camera_device = { .platform_data = &ov772x_info, }, }; +#endif /* CONFIG_I2C */ static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ @@ -429,7 +431,9 @@ static struct platform_device *migor_devices[] __initdata = { &sh_keysc_device, &migor_lcdc_device, &migor_ceu_device, +#ifdef CONFIG_I2C &migor_camera_device, +#endif &migor_nor_flash_device, &migor_nand_flash_device, }; diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig index 8122a9667fc9..8122a9667fc9 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Kconfig +++ b/arch/sh/boards/mach-r2d/Kconfig diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile index 0d4c75a72be0..0d4c75a72be0 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/mach-r2d/Makefile diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c index 8e49f6e51247..8e49f6e51247 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/mach-r2d/irq.c diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index 2308e8753bcd..2308e8753bcd 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig index 065f1df09bf1..065f1df09bf1 100644 --- a/arch/sh/boards/renesas/sdk7780/Kconfig +++ b/arch/sh/boards/mach-sdk7780/Kconfig diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile index 3d8f0befc35d..3d8f0befc35d 100644 --- a/arch/sh/boards/renesas/sdk7780/Makefile +++ b/arch/sh/boards/mach-sdk7780/Makefile diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c index 87cdc578f6ff..87cdc578f6ff 100644 --- a/arch/sh/boards/renesas/sdk7780/irq.c +++ b/arch/sh/boards/mach-sdk7780/irq.c diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index acc5932587f1..acc5932587f1 100644 --- a/arch/sh/boards/renesas/sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile index 63e7ed699f39..63e7ed699f39 100644 --- a/arch/sh/boards/se/7206/Makefile +++ b/arch/sh/boards/mach-se/7206/Makefile diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 1308e618e044..9c3a33210d61 100644 --- a/arch/sh/boards/se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -11,7 +11,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> static inline void delay(void) diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 9d5bfc77d0de..aef7f052851a 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -10,7 +10,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/interrupt.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> #define INTSTS0 0x31800000 #define INTSTS1 0x31800002 diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 4fe84cc08406..f5466384972e 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -10,7 +10,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> #include <asm/io.h> #include <asm/machvec.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile index 3024796c6203..3024796c6203 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/mach-se/7343/Makefile diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c index 3a6d11424938..8741abc1da7b 100644 --- a/arch/sh/boards/se/7343/io.c +++ b/arch/sh/boards/mach-se/7343/io.c @@ -6,7 +6,7 @@ */ #include <linux/kernel.h> #include <asm/io.h> -#include <asm/mach/se7343.h> +#include <mach-se/mach/se7343.h> #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 1112e86aa93a..5d96e2eef82a 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -13,9 +13,9 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/se7343.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <mach-se/mach/se7343.h> static void disable_se7343_irq(unsigned int irq) { diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 8ae718d6c710..486f40bf9274 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -2,7 +2,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <asm/machvec.h> -#include <asm/mach/se7343.h> +#include <mach-se/mach/se7343.h> #include <asm/heartbeat.h> #include <asm/irq.h> #include <asm/io.h> diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile index 8e624b06d5ea..8e624b06d5ea 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/mach-se/770x/Makefile diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c index b1ec085b8673..28833c8786ea 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/mach-se/770x/io.c @@ -6,7 +6,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se.h> +#include <mach-se/mach/se.h> /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index cdb0807928a5..ec1fea571b52 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se.h> +#include <mach-se/mach/se.h> static struct ipr_data ipr_irq_table[] = { /* diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index cf4a5ba12df4..9123d9687bf7 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -9,7 +9,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se.h> +#include <mach-se/mach/se.h> #include <asm/io.h> #include <asm/smc37c93x.h> #include <asm/heartbeat.h> @@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) /* SH771X Ethernet driver */ static struct resource sh_eth0_resources[] = { [0] = { @@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = { .num_resources = ARRAY_SIZE(sh_eth1_resources), .resource = sh_eth1_resources, }; +#endif static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) &sh_eth0_device, &sh_eth1_device, +#endif }; static int __init se_devices_setup(void) diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile index 7f09030980b3..7f09030980b3 100644 --- a/arch/sh/boards/se/7721/Makefile +++ b/arch/sh/boards/mach-se/7721/Makefile diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index c4fdd622bf8b..b417acc4dad0 100644 --- a/arch/sh/boards/se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> enum { UNUSED = 0, diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 1be3e92752f7..d3fc80ff4d83 100644 --- a/arch/sh/boards/se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile index 8694373389e5..8694373389e5 100644 --- a/arch/sh/boards/se/7722/Makefile +++ b/arch/sh/boards/mach-se/7722/Makefile diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 0b03f3f610b8..02d21a3e2a8f 100644 --- a/arch/sh/boards/se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se7722.h> +#include <mach-se/mach/se7722.h> static void disable_se7722_irq(unsigned int irq) { diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 6e228ea59788..fe6f96517e12 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -17,7 +17,7 @@ #include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/clock.h> -#include <asm/se7722.h> +#include <mach-se/mach/se7722.h> #include <asm/io.h> #include <asm/heartbeat.h> #include <asm/sh_keysc.h> diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index dbc29f3a9de5..dbc29f3a9de5 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index e8d846cec89d..6287ae570319 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -12,7 +12,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <asm/io.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> #include <asm/addrspace.h> static inline volatile u16 *port2adr(unsigned int port) diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c index c3d12590e5db..5c9847ea1e7c 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/mach-se/7751/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/irq.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> static struct ipr_data ipr_irq_table[] = { { 13, 3, 3, 2 }, diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c index 203b2923fe7f..203b2923fe7f 100644 --- a/arch/sh/boards/se/7751/pci.c +++ b/arch/sh/boards/mach-se/7751/pci.c diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index deefbfd92591..50572512e3e8 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -11,7 +11,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile index 6b88adae3ecc..6b88adae3ecc 100644 --- a/arch/sh/boards/se/7780/Makefile +++ b/arch/sh/boards/mach-se/7780/Makefile diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 6bd70da6bb47..66ad292c9fc3 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 0f08ab3b2bec..1d3a867e94e3 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile new file mode 100644 index 000000000000..2de42bae4b4f --- /dev/null +++ b/arch/sh/boards/mach-se/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o + +obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/ +obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/ +obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/ +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/ +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/ +obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/ +obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/ diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c index 1d0ef7faa10d..1d0ef7faa10d 100644 --- a/arch/sh/boards/se/7619/setup.c +++ b/arch/sh/boards/mach-se/board-se7619.c diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile index 400306a796ec..400306a796ec 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/mach-sh03/Makefile diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index 0a9266bb51c5..0a9266bb51c5 100644 --- a/arch/sh/boards/sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index 934ac4f1c48f..5771219be3fd 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -11,8 +11,8 @@ #include <linux/platform_device.h> #include <asm/io.h> #include <asm/rtc.h> -#include <asm/sh03/io.h> -#include <asm/sh03/sh03.h> +#include <mach-sh03/mach/io.h> +#include <mach-sh03/mach/sh03.h> #include <asm/addrspace.h> static void __init init_sh03_IRQ(void) diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile index f6c0b55516d2..f6c0b55516d2 100644 --- a/arch/sh/boards/renesas/sh7763rdp/Makefile +++ b/arch/sh/boards/mach-sh7763rdp/Makefile diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c index fd850bad2dec..fd850bad2dec 100644 --- a/arch/sh/boards/renesas/sh7763rdp/irq.c +++ b/arch/sh/boards/mach-sh7763rdp/irq.c diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 925f16af7121..925f16af7121 100644 --- a/arch/sh/boards/renesas/sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile index d2d2f4b6a502..d2d2f4b6a502 100644 --- a/arch/sh/boards/snapgear/Makefile +++ b/arch/sh/boards/mach-snapgear/Makefile diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c index 0f4824264557..0f4824264557 100644 --- a/arch/sh/boards/snapgear/io.c +++ b/arch/sh/boards/mach-snapgear/io.c diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c index 7022483f98e8..a5e349d3dda2 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/mach-snapgear/setup.c @@ -22,7 +22,7 @@ #include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/cpu/timer.h> +#include <cpu/timer.h> /* * EraseConfig handling functions diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile index 2cc6a23d9d39..2cc6a23d9d39 100644 --- a/arch/sh/boards/renesas/systemh/Makefile +++ b/arch/sh/boards/mach-systemh/Makefile diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c index 1b767e1a1428..1b767e1a1428 100644 --- a/arch/sh/boards/renesas/systemh/io.c +++ b/arch/sh/boards/mach-systemh/io.c diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c index 0ba2fe674c47..0ba2fe674c47 100644 --- a/arch/sh/boards/renesas/systemh/irq.c +++ b/arch/sh/boards/mach-systemh/irq.c diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c index ee78af842778..ee78af842778 100644 --- a/arch/sh/boards/renesas/systemh/setup.c +++ b/arch/sh/boards/mach-systemh/setup.c diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile index 08d753700062..08d753700062 100644 --- a/arch/sh/boards/titan/Makefile +++ b/arch/sh/boards/mach-titan/Makefile diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c index 4730c1dd697d..4730c1dd697d 100644 --- a/arch/sh/boards/titan/io.c +++ b/arch/sh/boards/mach-titan/io.c diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c index 5de3b2ad71af..5de3b2ad71af 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/mach-titan/setup.c diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 983e4551fecf..983e4551fecf 100644 --- a/arch/sh/boards/renesas/x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index b5c673c39337..b5c673c39337 100644 --- a/arch/sh/boards/renesas/x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index abc5b6d418fe..abc5b6d418fe 100644 --- a/arch/sh/boards/renesas/x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig deleted file mode 100644 index b0abddc3e84f..000000000000 --- a/arch/sh/boards/magicpanelr2/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if SH_MAGIC_PANEL_R2 - -menu "Magic Panel R2 options" - -config SH_MAGIC_PANEL_R2_VERSION - int SH_MAGIC_PANEL_R2_VERSION - default "3" - help - Set the version of the Magic Panel R2 - -endmenu - -endif diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile deleted file mode 100644 index 7a6d586b9072..000000000000 --- a/arch/sh/boards/magicpanelr2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Magic Panel specific parts -# - -obj-y := setup.o
\ No newline at end of file diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile deleted file mode 100644 index f663768429f0..000000000000 --- a/arch/sh/boards/renesas/ap325rxa/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile deleted file mode 100644 index f663768429f0..000000000000 --- a/arch/sh/boards/renesas/rsk7203/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile deleted file mode 100644 index 77037567633b..000000000000 --- a/arch/sh/boards/renesas/sh7785lcr/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile deleted file mode 100644 index d21775c28cda..000000000000 --- a/arch/sh/boards/se/7619/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the 7619 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile deleted file mode 100644 index 3190cc72430e..000000000000 --- a/arch/sh/boards/shmin/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the SHMIN board. -# - -obj-y := setup.o diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 8b37869a8227..5b54965eef98 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 +CONFIG_ENTRY_OFFSET ?= 0x00001000 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET targets := zImage vmlinux.srec uImage uImage.srec subdir- := compressed diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index f72c1989f5f2..622eac3cf556 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,8 +14,8 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include <asm/cache.h> -#include <asm/cpu/mmu_context.h> -#include <asm/cpu/registers.h> +#include <cpu/mmu_context.h> +#include <cpu/registers.h> /* * Fixed TLB entries to identity map the beginning of RAM diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 5471df53753c..29926a9b9ce2 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed Jun 4 17:30:00 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:18:59 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -79,9 +80,14 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -99,6 +105,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -175,6 +182,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -376,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -466,6 +476,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -512,10 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -587,6 +598,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -620,6 +632,7 @@ CONFIG_HW_RANDOM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -631,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -667,10 +681,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -679,6 +689,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -752,6 +763,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -762,17 +774,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -842,6 +853,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -898,6 +910,10 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -937,6 +953,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 57728788b753..d4075283956d 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc7 -# Fri Sep 21 15:46:27 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:34:24 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -19,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -55,21 +61,38 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -80,6 +103,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,13 +117,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -108,6 +136,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -116,14 +145,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -133,6 +165,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -142,12 +175,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -155,6 +191,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -194,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=49876504 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -204,7 +243,10 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -239,12 +281,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -263,10 +308,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -291,6 +333,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,6 +352,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -316,8 +360,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -334,10 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -345,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -366,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -374,6 +414,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_GDROM=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -384,11 +425,15 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -400,44 +445,49 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -449,6 +499,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -464,12 +515,12 @@ CONFIG_8139TOO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -491,7 +542,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -505,6 +555,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_MAPLE is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -530,10 +582,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -553,6 +608,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -568,45 +636,40 @@ CONFIG_SH_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -615,11 +678,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -653,7 +717,15 @@ CONFIG_FB_PVR2=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -680,49 +752,30 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -735,14 +788,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -771,7 +821,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -786,14 +835,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -807,35 +856,25 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -845,14 +884,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 756d38dc2f71..41e25b3a5b01 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Sep 11 19:42:44 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:24:57 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,12 +37,15 @@ CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_USER_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -73,6 +93,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +155,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0d000000 CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -219,11 +254,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_ISA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y # # Power management options (EXPERIMENTAL) # +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y # @@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AIC7XXX_OLD is not set @@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_QDI is not set @@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set # # Input Device Drivers @@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_HP6XX=y +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_HP600=y +# CONFIG_TOUCHSCREEN_HTCPEN is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -417,9 +464,11 @@ CONFIG_SERIO=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_HP680=y +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y @@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y +CONFIG_FB_SH_MOBILE_LCDC=y # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_HP680=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,7 +691,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -658,8 +705,11 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -668,10 +718,6 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_UTF8 is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 38f934ab50c7..99cc39c5c6ca 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,44 +1,53 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Thu Dec 7 17:13:04 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:35:07 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -CONFIG_SH_LANDISK=y -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +CONFIG_SH_LANDISK=y +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y # # Additional SuperH Device Drivers # +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # @@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -331,13 +319,14 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -364,49 +353,36 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -421,10 +397,6 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -432,9 +404,20 @@ CONFIG_ATALK=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -443,35 +426,17 @@ CONFIG_ATALK=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_OFFBOARD=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -748,18 +653,20 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set CONFIG_8139CP=y # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -767,58 +674,53 @@ CONFIG_8139CP=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -826,6 +728,7 @@ CONFIG_8139CP=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y # -# Video Capture Adapters +# Multimedia core support # +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set - -# -# V4L USB devices -# +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +# CONFIG_USB_GSPCA is not set CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m CONFIG_USB_IBMCAM=m @@ -975,106 +881,100 @@ CONFIG_USB_STV680=m # CONFIG_USB_ZC0301 is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set CONFIG_USB_DSBR=m +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -CONFIG_USB_DABUSB=m +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set +CONFIG_SOUND_PRIME=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Open Sound System +# USB Input Devices # -CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set @@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index b68b6cdbb78f..aecdfd33c695 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Sat Mar 24 22:04:27 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:39:41 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -CONFIG_SH_LBOX_RE2=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +CONFIG_SH_LBOX_RE2=y # # Timer and clock configuration @@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=40000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -262,11 +258,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y # CONFIG_YENTA_TOSHIBA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -336,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +326,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -370,29 +353,26 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # @@ -401,20 +381,8 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -427,10 +395,6 @@ CONFIG_NETFILTER=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -438,9 +402,20 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -449,36 +424,17 @@ CONFIG_NETFILTER=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -612,7 +547,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -622,6 +556,7 @@ CONFIG_ATA=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -635,18 +570,18 @@ CONFIG_ATA=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set @@ -656,88 +591,52 @@ CONFIG_ATA=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +# CONFIG_DISPLAY_SUPPORT is not set # -# Sound +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_SH is not set # CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# # -# DMA Devices +# SPI RTC drivers # # -# Auxiliary Display support +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Virtualization +# on-CPU RTC drivers # +# CONFIG_RTC_DRV_SH is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1136,7 +979,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1151,14 +993,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set @@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index f8398a5f10ee..a3a80f3d27c0 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Fri Aug 17 12:15:16 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:41:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -81,6 +104,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set CONFIG_CPU_SUBTYPE_SH7720=y +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -134,6 +166,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0C000000 CONFIG_MEMORY_SIZE=0x03F00000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SH_DSP=y CONFIG_SH_ADC=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_DSP=y @@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -228,11 +265,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Bus options # # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_PLATRAM is not set # @@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -477,10 +522,10 @@ CONFIG_SMC911X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -724,7 +764,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0 # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y @@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 @@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set CONFIG_SH_KGDB=y # @@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index e89d951c3c16..e4b900e72dcd 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,28 +1,35 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:27:01 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:47:16 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -31,10 +38,16 @@ CONFIG_SWAP=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -CONFIG_SH_SH4202_MICRODEV=y -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set CONFIG_CPU_SUBTYPE_SH4_202=y - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SH_SH4202_MICRODEV=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000 # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" # Bus options # CONFIG_SUPERHYWAY=y -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -282,12 +297,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set # CONFIG_UNIX is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -308,30 +324,19 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=1 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -536,6 +485,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -747,7 +645,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -762,21 +659,20 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 287408b2ace6..c4b3e1d8950d 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Thu May 22 14:30:07 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:44:41 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -77,9 +78,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -90,12 +96,13 @@ CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y # # CONFIG_SH_7722_SOLUTION_ENGINE is not set CONFIG_SH_MIGOR=y +CONFIG_SH_MIGOR_QVGA=y +# CONFIG_SH_MIGOR_RTA_WVGA is not set # # Timer and clock configuration @@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +552,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y @@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -870,6 +902,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -955,6 +989,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 1a072615ffd4..57a300797584 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc4 -# Thu Mar 6 15:39:59 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:51:13 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -84,13 +85,20 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -101,6 +109,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -188,6 +200,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -268,7 +281,7 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_RCU_TRACE=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -384,6 +396,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,7 +532,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set @@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y # CONFIG_TLAN is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y -# CONFIG_VIA_RHINE_NAPI is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,6 +795,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,24 +840,9 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -967,20 +983,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set @@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 0dc1ce7b9349..1d09d24d4298 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Fri Nov 23 14:03:57 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 00:59:19 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -88,6 +106,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type @@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set CONFIG_HUGETLB_PAGE_SIZE_1MB=y @@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y # Board support # CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_SH7785LCR is not set # CONFIG_SH_R7780RP is not set # CONFIG_SH_R7780MP is not set CONFIG_SH_R7785RP=y @@ -245,12 +276,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -295,6 +327,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -355,6 +387,7 @@ CONFIG_LLC=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -364,6 +397,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -488,7 +533,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -722,6 +771,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_SPINLOCK=y @@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index a0ebd439cbd2..840fe3843ffa 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 13:02:42 2008 +# Linux kernel version: 2.6.26 +# Mon Jul 28 22:23:03 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -33,21 +33,22 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_RSK7203=y # # Timer and clock configuration @@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -CONFIG_SMC91X=y +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia drivers # CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -734,6 +832,7 @@ CONFIG_SYSFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_OBJECTS=y +# CONFIG_DEBUG_OBJECTS_SELFTEST is not set +# CONFIG_DEBUG_OBJECTS_FREE is not set +# CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_WRITECOUNT=y +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 3a915fd436d9..8413236c1b37 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:25:55 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:55:52 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 0a6d3b9e648b..7d9fa6e9ded5 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:17:47 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:59:18 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index bb9bcd6591ab..6d834f242905 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Tue Jan 22 11:34:03 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:00:12 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set @@ -90,6 +106,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type @@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -174,6 +197,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y # CONFIG_SH_7780_SOLUTION_ENGINE is not set CONFIG_SH_SDK7780=y # CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_SDK7780_STANDALONE is not set CONFIG_SH_SDK7780_BASE=y # @@ -250,12 +273,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -321,6 +345,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_INGRESS is not set # # Classification @@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_SCH_FIFO=y # @@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_PLATFORM=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -625,7 +654,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -654,6 +682,7 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -670,6 +699,7 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -708,6 +741,7 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -726,6 +760,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -743,7 +778,6 @@ CONFIG_SMC91X=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y +CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set @@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_SUPERH_MONO=y CONFIG_LOGO_SUPERH_VGA16=y CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y # LED Triggers # # CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set @@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 6b34baa26eae..af15cbef12ba 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 20:27:08 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:06:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -87,9 +88,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -516,6 +526,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -738,13 +749,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 7b7273638447..4e30b70377e2 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 13:12:45 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:08:38 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -77,9 +78,14 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y @@ -90,12 +96,13 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -171,6 +178,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -368,6 +376,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -455,6 +465,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -497,10 +508,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -513,13 +524,13 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -572,6 +583,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -617,6 +629,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -646,6 +659,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_DAB is not set @@ -657,9 +671,9 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -676,6 +690,7 @@ CONFIG_FIRMWARE_EDID=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -690,15 +705,7 @@ CONFIG_FIRMWARE_EDID=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -714,40 +721,14 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SUPERH devices -# - -# -# System on Chip audio support -# +CONFIG_SND_SUPERH=y # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -759,6 +740,7 @@ CONFIG_HID=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -836,6 +818,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -854,7 +837,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -885,6 +867,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -941,6 +924,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -980,6 +967,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 3a3c3c1f507d..80c1c72edb56 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Fri Jun 15 19:43:06 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:12:32 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -60,20 +62,26 @@ CONFIG_EVENTFD=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH2=y CONFIG_CPU_SUBTYPE_SH7619=y +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y +# CONFIG_CACHE_WRITEBACK is not set +CONFIG_CACHE_WRITETHROUGH=y +# CONFIG_CACHE_OFF is not set # # Processor features @@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set -CONFIG_CPU_HAS_IPR_IRQ=y # # Board support @@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5 # # DMA support # -# CONFIG_SH_DMA is not set # # Companion Chips @@ -205,11 +225,13 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options @@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # +# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # -# PCCARD (PCMCIA/CardBus) support -# - -# # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set @@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -416,6 +411,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_DAB=y # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -561,12 +518,9 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # # Miscellaneous filesystems @@ -607,8 +560,11 @@ CONFIG_RAMFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -617,28 +573,23 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # Security options # # CONFIG_KEYS is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0caf11bb7e27..af7bb589c2c8 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -14,8 +14,8 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <asm/cacheflush.h> -#include <asm/mach/sysasic.h> -#include <asm/mach/dma.h> +#include <mach/sysasic.h> +#include <mach/dma.h> #include <asm/dma.h> struct g2_channel { diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 838fad566eaf..391cbe1c2956 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -13,8 +13,8 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <asm/mach/sysasic.h> -#include <asm/mach/dma.h> +#include <mach/sysasic.h> +#include <mach/dma.h> #include <asm/dma.h> #include <asm/io.h> diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 71ff3d6f26e2..b2ffe649c7c0 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <asm/dreamcast/dma.h> +#include <mach-dreamcast/mach/dma.h> #include <asm/dma.h> #include <asm/io.h> #include "dma-sh.h" diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index 0f591fbc922d..b05af34fc15d 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,7 +11,7 @@ #ifndef __DMA_SH_H #define __DMA_SH_H -#include <asm/cpu/dma.h> +#include <cpu/dma.h> /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index c44699301eeb..2bf85cf091e1 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -26,7 +26,7 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/mach/pci.h> +#include <mach/pci.h> static void __init gapspci_fixup_resources(struct pci_dev *dev) { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 980275ffa30b..5ccf9ea3a9de 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -2,7 +2,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/types.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include "pci-sh5.h" static inline u8 bridge_swizzle(u8 pin, u8 slot) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f54c291db37b..f5d2a2aa6f3f 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -26,7 +26,7 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/mach/pci.h> +#include <mach/pci.h> static struct resource gapspci_io_resource = { .name = "GAPSPCI IO", diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index bbdb48c124a2..3145c62484d6 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> #include <asm/io.h> #include "pci-sh4.h" diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index a00a4df8c02d..7a97438762c8 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -19,7 +19,7 @@ #include <linux/delay.h> #include <linux/types.h> #include <linux/irq.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/pci.h> #include <asm/io.h> #include "pci-sh5.h" diff --git a/include/asm-sh/.gitignore b/arch/sh/include/asm/.gitignore index 9218ef82b698..378db779fb6c 100644 --- a/include/asm-sh/.gitignore +++ b/arch/sh/include/asm/.gitignore @@ -1,3 +1 @@ -cpu -mach machtypes.h diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild index 43910cdf78a5..43910cdf78a5 100644 --- a/include/asm-sh/Kbuild +++ b/arch/sh/include/asm/Kbuild diff --git a/include/asm-sh/a.out.h b/arch/sh/include/asm/a.out.h index 1f93130e179c..1f93130e179c 100644 --- a/include/asm-sh/a.out.h +++ b/arch/sh/include/asm/a.out.h diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h index 5f85cf74d59d..48824c1fab80 100644 --- a/include/asm-sh/adc.h +++ b/arch/sh/include/asm/adc.h @@ -5,7 +5,7 @@ * Copyright (C) 2004 Andriy Skulysh */ -#include <asm/cpu/adc.h> +#include <cpu/adc.h> int adc_single(unsigned int channel); diff --git a/include/asm-sh/addrspace.h b/arch/sh/include/asm/addrspace.h index fa544fc38c23..2702d81bfc0d 100644 --- a/include/asm-sh/addrspace.h +++ b/arch/sh/include/asm/addrspace.h @@ -12,7 +12,7 @@ #ifdef __KERNEL__ -#include <asm/cpu/addrspace.h> +#include <cpu/addrspace.h> /* If this CPU supports segmentation, hook up the helpers */ #ifdef P1SEG diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h index 4c5b7dbfcedb..4c5b7dbfcedb 100644 --- a/include/asm-sh/atomic-grb.h +++ b/arch/sh/include/asm/atomic-grb.h diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h index 74f7943cff6f..74f7943cff6f 100644 --- a/include/asm-sh/atomic-irq.h +++ b/arch/sh/include/asm/atomic-irq.h diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h index 4b00b78e3f4f..4b00b78e3f4f 100644 --- a/include/asm-sh/atomic-llsc.h +++ b/arch/sh/include/asm/atomic-llsc.h diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h index c043ef003028..c043ef003028 100644 --- a/include/asm-sh/atomic.h +++ b/arch/sh/include/asm/atomic.h diff --git a/include/asm-sh/auxvec.h b/arch/sh/include/asm/auxvec.h index a6b9d4f4859e..483effd65e00 100644 --- a/include/asm-sh/auxvec.h +++ b/arch/sh/include/asm/auxvec.h @@ -12,7 +12,7 @@ */ #define AT_FPUCW 18 /* Used FPU control word. */ -#ifdef CONFIG_VSYSCALL +#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) /* * Only define this in the vsyscall case, the entry point to * the vsyscall page gets placed here. The kernel will attempt diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h index a5907b94395b..a5907b94395b 100644 --- a/include/asm-sh/bitops-grb.h +++ b/arch/sh/include/asm/bitops-grb.h diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h index 653a12750584..653a12750584 100644 --- a/include/asm-sh/bitops-irq.h +++ b/arch/sh/include/asm/bitops-irq.h diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h index d7d382f63ee5..d7d382f63ee5 100644 --- a/include/asm-sh/bitops.h +++ b/arch/sh/include/asm/bitops.h diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h index c01718040166..c01718040166 100644 --- a/include/asm-sh/bug.h +++ b/arch/sh/include/asm/bug.h diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h index 121b2ecddfc3..121b2ecddfc3 100644 --- a/include/asm-sh/bugs.h +++ b/arch/sh/include/asm/bugs.h diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h index 4c13e6117563..4c13e6117563 100644 --- a/include/asm-sh/byteorder.h +++ b/arch/sh/include/asm/byteorder.h diff --git a/include/asm-sh/cache.h b/arch/sh/include/asm/cache.h index 083419f47c65..02df18ea9608 100644 --- a/include/asm-sh/cache.h +++ b/arch/sh/include/asm/cache.h @@ -10,7 +10,7 @@ #ifdef __KERNEL__ #include <linux/init.h> -#include <asm/cpu/cache.h> +#include <cpu/cache.h> #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) diff --git a/include/asm-sh/cacheflush.h b/arch/sh/include/asm/cacheflush.h index e034c3604111..09acbc32d6c7 100644 --- a/include/asm-sh/cacheflush.h +++ b/arch/sh/include/asm/cacheflush.h @@ -27,7 +27,7 @@ #define __flush_purge_region(start, size) do { (void)(start); } while (0) #define __flush_invalidate_region(start, size) do { (void)(start); } while (0) #else -#include <asm/cpu/cacheflush.h> +#include <cpu/cacheflush.h> /* * Consistent DMA requires that the __flush_xxx() primitives must be set diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h index 67496ab0ef04..67496ab0ef04 100644 --- a/include/asm-sh/checksum.h +++ b/arch/sh/include/asm/checksum.h diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h index 14b7ac2f0a07..14b7ac2f0a07 100644 --- a/include/asm-sh/checksum_32.h +++ b/arch/sh/include/asm/checksum_32.h diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h index 9c62a031a8f5..9c62a031a8f5 100644 --- a/include/asm-sh/checksum_64.h +++ b/arch/sh/include/asm/checksum_64.h diff --git a/include/asm-sh/clock.h b/arch/sh/include/asm/clock.h index 720dfab7b15e..720dfab7b15e 100644 --- a/include/asm-sh/clock.h +++ b/arch/sh/include/asm/clock.h diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h index e2681abe764f..e2681abe764f 100644 --- a/include/asm-sh/cmpxchg-grb.h +++ b/arch/sh/include/asm/cmpxchg-grb.h diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h index 43049ec0554b..43049ec0554b 100644 --- a/include/asm-sh/cmpxchg-irq.h +++ b/arch/sh/include/asm/cmpxchg-irq.h diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h index 86308aa39731..86308aa39731 100644 --- a/include/asm-sh/cpu-features.h +++ b/arch/sh/include/asm/cpu-features.h diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h index 6ca395d1393e..6ca395d1393e 100644 --- a/include/asm-sh/cputime.h +++ b/arch/sh/include/asm/cputime.h diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h index 62b63880b333..62b63880b333 100644 --- a/include/asm-sh/current.h +++ b/arch/sh/include/asm/current.h diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h index 4b16bf9b56bd..4b16bf9b56bd 100644 --- a/include/asm-sh/delay.h +++ b/arch/sh/include/asm/delay.h diff --git a/include/asm-sh/device.h b/arch/sh/include/asm/device.h index efd511d0803a..efd511d0803a 100644 --- a/include/asm-sh/device.h +++ b/arch/sh/include/asm/device.h diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h index 6cd978cefb28..6cd978cefb28 100644 --- a/include/asm-sh/div64.h +++ b/arch/sh/include/asm/div64.h diff --git a/include/asm-sh/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h index 627315ecdb52..627315ecdb52 100644 --- a/include/asm-sh/dma-mapping.h +++ b/arch/sh/include/asm/dma-mapping.h diff --git a/include/asm-sh/dma.h b/arch/sh/include/asm/dma.h index a65b02fd186e..beca7128e2ab 100644 --- a/include/asm-sh/dma.h +++ b/arch/sh/include/asm/dma.h @@ -15,7 +15,7 @@ #include <linux/wait.h> #include <linux/sched.h> #include <linux/sysdev.h> -#include <asm/cpu/dma.h> +#include <cpu/dma.h> /* The maximum address that we can perform a DMA transfer to on this platform */ /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h index c5edba216cf1..c5edba216cf1 100644 --- a/include/asm-sh/dmabrg.h +++ b/arch/sh/include/asm/dmabrg.h diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h index 5bdc9d9be3de..5bdc9d9be3de 100644 --- a/include/asm-sh/edosk7705.h +++ b/arch/sh/include/asm/edosk7705.h diff --git a/include/asm-sh/elf.h b/arch/sh/include/asm/elf.h index f01449a8d378..f01449a8d378 100644 --- a/include/asm-sh/elf.h +++ b/arch/sh/include/asm/elf.h diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h index 108d8c48e42e..108d8c48e42e 100644 --- a/include/asm-sh/emergency-restart.h +++ b/arch/sh/include/asm/emergency-restart.h diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S index 2dab0b8d9454..2dab0b8d9454 100644 --- a/include/asm-sh/entry-macros.S +++ b/arch/sh/include/asm/entry-macros.S diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h index 51cf6f9cebb8..51cf6f9cebb8 100644 --- a/include/asm-sh/errno.h +++ b/arch/sh/include/asm/errno.h diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h index d92e99cd8c8a..d92e99cd8c8a 100644 --- a/include/asm-sh/fb.h +++ b/arch/sh/include/asm/fb.h diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h index 46ab12db5739..46ab12db5739 100644 --- a/include/asm-sh/fcntl.h +++ b/arch/sh/include/asm/fcntl.h diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h index 721fcc4d5e98..721fcc4d5e98 100644 --- a/include/asm-sh/fixmap.h +++ b/arch/sh/include/asm/fixmap.h diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h index 0cc800299e06..0cc800299e06 100644 --- a/include/asm-sh/flat.h +++ b/arch/sh/include/asm/flat.h diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h index 91462fea1507..91462fea1507 100644 --- a/include/asm-sh/fpu.h +++ b/arch/sh/include/asm/fpu.h diff --git a/include/asm-sh/freq.h b/arch/sh/include/asm/freq.h index 39c0e091cf58..4ece90b09b9c 100644 --- a/include/asm-sh/freq.h +++ b/arch/sh/include/asm/freq.h @@ -12,7 +12,7 @@ #define __ASM_SH_FREQ_H #ifdef __KERNEL__ -#include <asm/cpu/freq.h> +#include <cpu/freq.h> #endif /* __KERNEL__ */ #endif /* __ASM_SH_FREQ_H */ diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h index a9f16a7f9aea..a9f16a7f9aea 100644 --- a/include/asm-sh/futex-irq.h +++ b/arch/sh/include/asm/futex-irq.h diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h index 68256ec5fa35..68256ec5fa35 100644 --- a/include/asm-sh/futex.h +++ b/arch/sh/include/asm/futex.h diff --git a/include/asm-sh/gpio.h b/arch/sh/include/asm/gpio.h index 9bb27e0f11a4..cf32bd2df881 100644 --- a/include/asm-sh/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -13,7 +13,7 @@ #define __ASM_SH_GPIO_H #if defined(CONFIG_CPU_SH3) -#include <asm/cpu/gpio.h> +#include <cpu/gpio.h> #endif #endif /* __ASM_SH_GPIO_H */ diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h index 715ee237fc77..715ee237fc77 100644 --- a/include/asm-sh/hardirq.h +++ b/arch/sh/include/asm/hardirq.h diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h index 8c1353baf00f..8c1353baf00f 100644 --- a/include/asm-sh/hd64461.h +++ b/arch/sh/include/asm/hd64461.h diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h index a3cdca2713dd..a3cdca2713dd 100644 --- a/include/asm-sh/hd64465/gpio.h +++ b/arch/sh/include/asm/hd64465/gpio.h diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h index cfd0e803d2a2..cfd0e803d2a2 100644 --- a/include/asm-sh/hd64465/hd64465.h +++ b/arch/sh/include/asm/hd64465/hd64465.h diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h index 139f1472e5bb..139f1472e5bb 100644 --- a/include/asm-sh/hd64465/io.h +++ b/arch/sh/include/asm/hd64465/io.h diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h index 724a43ed245e..724a43ed245e 100644 --- a/include/asm-sh/heartbeat.h +++ b/arch/sh/include/asm/heartbeat.h diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h index 0d4165a32dcd..0d4165a32dcd 100644 --- a/include/asm-sh/hp6xx.h +++ b/arch/sh/include/asm/hp6xx.h diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h index 967068fb79ac..967068fb79ac 100644 --- a/include/asm-sh/hugetlb.h +++ b/arch/sh/include/asm/hugetlb.h diff --git a/include/asm-sh/hw_irq.h b/arch/sh/include/asm/hw_irq.h index d557b00111bf..d557b00111bf 100644 --- a/include/asm-sh/hw_irq.h +++ b/arch/sh/include/asm/hw_irq.h diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h index 24182116711f..24182116711f 100644 --- a/include/asm-sh/i2c-sh7760.h +++ b/arch/sh/include/asm/i2c-sh7760.h diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h index e3d304b280f6..e3d304b280f6 100644 --- a/include/asm-sh/ilsel.h +++ b/arch/sh/include/asm/ilsel.h diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h index a4fbf0c84fb1..a4fbf0c84fb1 100644 --- a/include/asm-sh/io.h +++ b/arch/sh/include/asm/io.h diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h index 92fc6070d7b3..92fc6070d7b3 100644 --- a/include/asm-sh/io_generic.h +++ b/arch/sh/include/asm/io_generic.h diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h index f1251d4f0ba9..f1251d4f0ba9 100644 --- a/include/asm-sh/io_trapped.h +++ b/arch/sh/include/asm/io_trapped.h diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h index b279fe06dfe5..b279fe06dfe5 100644 --- a/include/asm-sh/ioctl.h +++ b/arch/sh/include/asm/ioctl.h diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h index c212c371a4a5..c212c371a4a5 100644 --- a/include/asm-sh/ioctls.h +++ b/arch/sh/include/asm/ioctls.h diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h index 5ffc9972a7ea..5ffc9972a7ea 100644 --- a/include/asm-sh/ipcbuf.h +++ b/arch/sh/include/asm/ipcbuf.h diff --git a/include/asm-sh/irq.h b/arch/sh/include/asm/irq.h index ca66e5df69dc..6195a531c1b0 100644 --- a/include/asm-sh/irq.h +++ b/arch/sh/include/asm/irq.h @@ -51,7 +51,7 @@ extern void irq_ctx_exit(int cpu); #endif #ifdef CONFIG_CPU_SH5 -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #endif #endif /* __ASM_SH_IRQ_H */ diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h index 3dd9c0b70270..3dd9c0b70270 100644 --- a/include/asm-sh/irq_regs.h +++ b/arch/sh/include/asm/irq_regs.h diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h index 46e71da5be6b..46e71da5be6b 100644 --- a/include/asm-sh/irqflags.h +++ b/arch/sh/include/asm/irqflags.h diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h index 60218f541340..60218f541340 100644 --- a/include/asm-sh/irqflags_32.h +++ b/arch/sh/include/asm/irqflags_32.h diff --git a/include/asm-sh/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h index 4f6b8a56e7bd..88f65222c1d4 100644 --- a/include/asm-sh/irqflags_64.h +++ b/arch/sh/include/asm/irqflags_64.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_IRQFLAGS_64_H #define __ASM_SH_IRQFLAGS_64_H -#include <asm/cpu/registers.h> +#include <cpu/registers.h> #define SR_MASK_LL 0x00000000000000f0LL #define SR_BL_LL 0x0000000010000000LL diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h index 49cd69051a88..49cd69051a88 100644 --- a/include/asm-sh/kdebug.h +++ b/arch/sh/include/asm/kdebug.h diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h index 00f4260ef09b..00f4260ef09b 100644 --- a/include/asm-sh/kexec.h +++ b/arch/sh/include/asm/kexec.h diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h index 24e42078f36f..24e42078f36f 100644 --- a/include/asm-sh/kgdb.h +++ b/arch/sh/include/asm/kgdb.h diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h index 84d565c696be..84d565c696be 100644 --- a/include/asm-sh/kmap_types.h +++ b/arch/sh/include/asm/kmap_types.h diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h index e6d160504923..e6d160504923 100644 --- a/include/asm-sh/lboxre2.h +++ b/arch/sh/include/asm/lboxre2.h diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h index 3565a4f4009f..3565a4f4009f 100644 --- a/include/asm-sh/linkage.h +++ b/arch/sh/include/asm/linkage.h diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h index 9ed9b9cb459a..9ed9b9cb459a 100644 --- a/include/asm-sh/local.h +++ b/arch/sh/include/asm/local.h diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h index b2e4124070ae..b2e4124070ae 100644 --- a/include/asm-sh/machvec.h +++ b/arch/sh/include/asm/machvec.h diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h index c644a77ee357..c644a77ee357 100644 --- a/include/asm-sh/magicpanelr2.h +++ b/arch/sh/include/asm/magicpanelr2.h diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h index 0aee96a97330..0aee96a97330 100644 --- a/include/asm-sh/mc146818rtc.h +++ b/arch/sh/include/asm/mc146818rtc.h diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h index 1aed15856e11..1aed15856e11 100644 --- a/include/asm-sh/microdev.h +++ b/arch/sh/include/asm/microdev.h diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h index 10016e0f4a4e..10016e0f4a4e 100644 --- a/include/asm-sh/migor.h +++ b/arch/sh/include/asm/migor.h diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h index 156eb0225cf6..156eb0225cf6 100644 --- a/include/asm-sh/mman.h +++ b/arch/sh/include/asm/mman.h diff --git a/include/asm-sh/mmu.h b/arch/sh/include/asm/mmu.h index fdcb93bc6d11..fdcb93bc6d11 100644 --- a/include/asm-sh/mmu.h +++ b/arch/sh/include/asm/mmu.h diff --git a/include/asm-sh/mmu_context.h b/arch/sh/include/asm/mmu_context.h index 8589a50febd0..04c0c9733ad6 100644 --- a/include/asm-sh/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -8,7 +8,7 @@ #define __ASM_SH_MMU_CONTEXT_H #ifdef __KERNEL__ -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/tlbflush.h> #include <asm/uaccess.h> #include <asm/io.h> diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h index f4f9aebd68b7..f4f9aebd68b7 100644 --- a/include/asm-sh/mmu_context_32.h +++ b/arch/sh/include/asm/mmu_context_32.h diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h index 9649f1c07caf..de121025d87f 100644 --- a/include/asm-sh/mmu_context_64.h +++ b/arch/sh/include/asm/mmu_context_64.h @@ -11,7 +11,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include <asm/cpu/registers.h> +#include <cpu/registers.h> #include <asm/cacheflush.h> #define SR_ASID_MASK 0xffffffffff00ffffULL diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h index 2969253c4042..2969253c4042 100644 --- a/include/asm-sh/mmzone.h +++ b/arch/sh/include/asm/mmzone.h diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h index 46eccd331660..46eccd331660 100644 --- a/include/asm-sh/module.h +++ b/arch/sh/include/asm/module.h diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h index 517432343fb5..517432343fb5 100644 --- a/include/asm-sh/msgbuf.h +++ b/arch/sh/include/asm/msgbuf.h diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h index 458c1f7fbc18..458c1f7fbc18 100644 --- a/include/asm-sh/mutex.h +++ b/arch/sh/include/asm/mutex.h diff --git a/include/asm-sh/page.h b/arch/sh/include/asm/page.h index 77fb8bf02e4e..77fb8bf02e4e 100644 --- a/include/asm-sh/page.h +++ b/arch/sh/include/asm/page.h diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h index ae245afdfd6a..ae245afdfd6a 100644 --- a/include/asm-sh/param.h +++ b/arch/sh/include/asm/param.h diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h index f67ba60a2acd..f67ba60a2acd 100644 --- a/include/asm-sh/parport.h +++ b/arch/sh/include/asm/parport.h diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h index df1d383e18a5..df1d383e18a5 100644 --- a/include/asm-sh/pci.h +++ b/arch/sh/include/asm/pci.h diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h index 4db4b39a4399..4db4b39a4399 100644 --- a/include/asm-sh/percpu.h +++ b/arch/sh/include/asm/percpu.h diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h index 84dd2db7104c..84dd2db7104c 100644 --- a/include/asm-sh/pgalloc.h +++ b/arch/sh/include/asm/pgalloc.h diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h index a4a8f8b93463..a4a8f8b93463 100644 --- a/include/asm-sh/pgtable.h +++ b/arch/sh/include/asm/pgtable.h diff --git a/include/asm-sh/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h index 72ea209195bd..72ea209195bd 100644 --- a/include/asm-sh/pgtable_32.h +++ b/arch/sh/include/asm/pgtable_32.h diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h index c78990cda557..c78990cda557 100644 --- a/include/asm-sh/pgtable_64.h +++ b/arch/sh/include/asm/pgtable_64.h diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h index 56fdbd6b1c94..56fdbd6b1c94 100644 --- a/include/asm-sh/pm.h +++ b/arch/sh/include/asm/pm.h diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h index c98509d3149e..c98509d3149e 100644 --- a/include/asm-sh/poll.h +++ b/arch/sh/include/asm/poll.h diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h index 4eeb723aee7e..4eeb723aee7e 100644 --- a/include/asm-sh/posix_types.h +++ b/arch/sh/include/asm/posix_types.h diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h index 0a3d2f54ab27..0a3d2f54ab27 100644 --- a/include/asm-sh/posix_types_32.h +++ b/arch/sh/include/asm/posix_types_32.h diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h index 0620317a6f0f..0620317a6f0f 100644 --- a/include/asm-sh/posix_types_64.h +++ b/arch/sh/include/asm/posix_types_64.h diff --git a/include/asm-sh/processor.h b/arch/sh/include/asm/processor.h index 15d9f92ca383..15d9f92ca383 100644 --- a/include/asm-sh/processor.h +++ b/arch/sh/include/asm/processor.h diff --git a/include/asm-sh/processor_32.h b/arch/sh/include/asm/processor_32.h index c6583f267071..0dadd75bd93c 100644 --- a/include/asm-sh/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -19,7 +19,7 @@ * Default implementation of macro that returns current * instruction pointer ("program counter"). */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; }) +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) /* Core Processor Version Register */ #define CCN_PVR 0xff000030 diff --git a/include/asm-sh/processor_64.h b/arch/sh/include/asm/processor_64.h index fc7fc685ba27..770d5169983b 100644 --- a/include/asm-sh/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -19,7 +19,7 @@ #include <asm/types.h> #include <asm/cache.h> #include <asm/ptrace.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> /* * Default implementation of macro that returns current diff --git a/include/asm-sh/ptrace.h b/arch/sh/include/asm/ptrace.h index 643ab5a7cf3b..643ab5a7cf3b 100644 --- a/include/asm-sh/ptrace.h +++ b/arch/sh/include/asm/ptrace.h diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h index 4903f9e52dd8..4903f9e52dd8 100644 --- a/include/asm-sh/push-switch.h +++ b/arch/sh/include/asm/push-switch.h diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h index 306f7359f7d4..306f7359f7d4 100644 --- a/include/asm-sh/r7780rp.h +++ b/arch/sh/include/asm/r7780rp.h diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h index 9c2499a86ec0..9c2499a86ec0 100644 --- a/include/asm-sh/resource.h +++ b/arch/sh/include/asm/resource.h diff --git a/include/asm-sh/rtc.h b/arch/sh/include/asm/rtc.h index ec45ba8e11d9..1813f4202a24 100644 --- a/include/asm-sh/rtc.h +++ b/arch/sh/include/asm/rtc.h @@ -11,6 +11,6 @@ struct sh_rtc_platform_info { unsigned long capabilities; }; -#include <asm/cpu/rtc.h> +#include <cpu/rtc.h> #endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h index 0a800157b826..0a800157b826 100644 --- a/include/asm-sh/rts7751r2d.h +++ b/arch/sh/include/asm/rts7751r2d.h diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h index 1987f3ea7f1b..1987f3ea7f1b 100644 --- a/include/asm-sh/rwsem.h +++ b/arch/sh/include/asm/rwsem.h diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h index 2084d0373693..2084d0373693 100644 --- a/include/asm-sh/scatterlist.h +++ b/arch/sh/include/asm/scatterlist.h diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h index 697dc865f21b..697dc865f21b 100644 --- a/include/asm-sh/sdk7780.h +++ b/arch/sh/include/asm/sdk7780.h diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h index 8f8f4ad400df..8f8f4ad400df 100644 --- a/include/asm-sh/sections.h +++ b/arch/sh/include/asm/sections.h diff --git a/include/asm-sh/segment.h b/arch/sh/include/asm/segment.h index 5e2725f4ac49..5e2725f4ac49 100644 --- a/include/asm-sh/segment.h +++ b/arch/sh/include/asm/segment.h diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h index d79f3bd570b2..d79f3bd570b2 100644 --- a/include/asm-sh/sembuf.h +++ b/arch/sh/include/asm/sembuf.h diff --git a/include/asm-sh/serial.h b/arch/sh/include/asm/serial.h index 21f6d330f189..e13cc948ee60 100644 --- a/include/asm-sh/serial.h +++ b/arch/sh/include/asm/serial.h @@ -21,7 +21,7 @@ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) #ifdef CONFIG_HD64465 -#include <asm/hd64465.h> +#include <asm/hd64465/hd64465.h> #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h index 55a2bd328d99..55a2bd328d99 100644 --- a/include/asm-sh/setup.h +++ b/arch/sh/include/asm/setup.h diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h index d3c548443f2a..d3c548443f2a 100644 --- a/include/asm-sh/sfp-machine.h +++ b/arch/sh/include/asm/sfp-machine.h diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h index 8767f61aceca..8767f61aceca 100644 --- a/include/asm-sh/sh7760fb.h +++ b/arch/sh/include/asm/sh7760fb.h diff --git a/include/asm-sh/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h index 8750cc852977..8750cc852977 100644 --- a/include/asm-sh/sh7763rdp.h +++ b/arch/sh/include/asm/sh7763rdp.h diff --git a/include/asm-sh/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h index 1ce27d5c7491..1ce27d5c7491 100644 --- a/include/asm-sh/sh7785lcr.h +++ b/arch/sh/include/asm/sh7785lcr.h diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h index 0ca261956e3d..0ca261956e3d 100644 --- a/include/asm-sh/sh_bios.h +++ b/arch/sh/include/asm/sh_bios.h diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h index b5a4dd5a9729..b5a4dd5a9729 100644 --- a/include/asm-sh/sh_keysc.h +++ b/arch/sh/include/asm/sh_keysc.h diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h index 27677727df4d..27677727df4d 100644 --- a/include/asm-sh/sh_mobile_lcdc.h +++ b/arch/sh/include/asm/sh_mobile_lcdc.h diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h index b2101f490521..b2101f490521 100644 --- a/include/asm-sh/shmbuf.h +++ b/arch/sh/include/asm/shmbuf.h diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h index 36ba138a81fb..36ba138a81fb 100644 --- a/include/asm-sh/shmin.h +++ b/arch/sh/include/asm/shmin.h diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h index ba1758d90106..ba1758d90106 100644 --- a/include/asm-sh/shmparam.h +++ b/arch/sh/include/asm/shmparam.h diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h index 8ce1435bc0bf..8ce1435bc0bf 100644 --- a/include/asm-sh/sigcontext.h +++ b/arch/sh/include/asm/sigcontext.h diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h index 813040ed68a9..813040ed68a9 100644 --- a/include/asm-sh/siginfo.h +++ b/arch/sh/include/asm/siginfo.h diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h index 5c5c1e852089..5c5c1e852089 100644 --- a/include/asm-sh/signal.h +++ b/arch/sh/include/asm/signal.h diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h index 585da2a8fc45..585da2a8fc45 100644 --- a/include/asm-sh/smc37c93x.h +++ b/arch/sh/include/asm/smc37c93x.h diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h index 593343cd26ee..593343cd26ee 100644 --- a/include/asm-sh/smp.h +++ b/arch/sh/include/asm/smp.h diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h index 042d95f51c4d..042d95f51c4d 100644 --- a/include/asm-sh/snapgear.h +++ b/arch/sh/include/asm/snapgear.h diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h index 6d4bf6512959..6d4bf6512959 100644 --- a/include/asm-sh/socket.h +++ b/arch/sh/include/asm/socket.h diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h index cf8b96b1f9ab..cf8b96b1f9ab 100644 --- a/include/asm-sh/sockios.h +++ b/arch/sh/include/asm/sockios.h diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h index 547a540b6667..547a540b6667 100644 --- a/include/asm-sh/sparsemem.h +++ b/arch/sh/include/asm/sparsemem.h diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h index e96f5b0953c8..e96f5b0953c8 100644 --- a/include/asm-sh/spi.h +++ b/arch/sh/include/asm/spi.h diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h index e793181d64da..e793181d64da 100644 --- a/include/asm-sh/spinlock.h +++ b/arch/sh/include/asm/spinlock.h diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h index b4d244e7b60c..b4d244e7b60c 100644 --- a/include/asm-sh/spinlock_types.h +++ b/arch/sh/include/asm/spinlock_types.h diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h index e1810cc6e3da..e1810cc6e3da 100644 --- a/include/asm-sh/stat.h +++ b/arch/sh/include/asm/stat.h diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h index 9202a023328f..9202a023328f 100644 --- a/include/asm-sh/statfs.h +++ b/arch/sh/include/asm/statfs.h diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h index 8c1ea21dc0ae..8c1ea21dc0ae 100644 --- a/include/asm-sh/string.h +++ b/arch/sh/include/asm/string.h diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h index 55f8db6bc1d7..55f8db6bc1d7 100644 --- a/include/asm-sh/string_32.h +++ b/arch/sh/include/asm/string_32.h diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h index aa1fef229c78..aa1fef229c78 100644 --- a/include/asm-sh/string_64.h +++ b/arch/sh/include/asm/string_64.h diff --git a/include/asm-sh/system.h b/arch/sh/include/asm/system.h index 056d68cd2108..056d68cd2108 100644 --- a/include/asm-sh/system.h +++ b/arch/sh/include/asm/system.h diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h index f11bcf0855ed..f11bcf0855ed 100644 --- a/include/asm-sh/system_32.h +++ b/arch/sh/include/asm/system_32.h diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h index 943acf5ea07c..943acf5ea07c 100644 --- a/include/asm-sh/system_64.h +++ b/arch/sh/include/asm/system_64.h diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h index 4161122c84ef..4161122c84ef 100644 --- a/include/asm-sh/systemh7751.h +++ b/arch/sh/include/asm/systemh7751.h diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h index 77db116948cf..77db116948cf 100644 --- a/include/asm-sh/termbits.h +++ b/arch/sh/include/asm/termbits.h diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h index 0a8c793c76f2..0a8c793c76f2 100644 --- a/include/asm-sh/termios.h +++ b/arch/sh/include/asm/termios.h diff --git a/include/asm-sh/thread_info.h b/arch/sh/include/asm/thread_info.h index eeb4c747119e..eeb4c747119e 100644 --- a/include/asm-sh/thread_info.h +++ b/arch/sh/include/asm/thread_info.h diff --git a/include/asm-sh/timer.h b/arch/sh/include/asm/timer.h index 327f7eb8976a..a7ca3a195bb5 100644 --- a/include/asm-sh/timer.h +++ b/arch/sh/include/asm/timer.h @@ -3,7 +3,7 @@ #include <linux/sysdev.h> #include <linux/clocksource.h> -#include <asm/cpu/timer.h> +#include <cpu/timer.h> struct sys_timer_ops { int (*init)(void); diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h index a873e24113cf..a873e24113cf 100644 --- a/include/asm-sh/timex.h +++ b/arch/sh/include/asm/timex.h diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h index 03f3583c8918..03f3583c8918 100644 --- a/include/asm-sh/titan.h +++ b/arch/sh/include/asm/titan.h diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h index 88ff1ae8a6b8..88ff1ae8a6b8 100644 --- a/include/asm-sh/tlb.h +++ b/arch/sh/include/asm/tlb.h diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h index 0a96f3af69e3..0a96f3af69e3 100644 --- a/include/asm-sh/tlb_64.h +++ b/arch/sh/include/asm/tlb_64.h diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h index e0ac97221ae6..e0ac97221ae6 100644 --- a/include/asm-sh/tlbflush.h +++ b/arch/sh/include/asm/tlbflush.h diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h index 95f0085e098a..95f0085e098a 100644 --- a/include/asm-sh/topology.h +++ b/arch/sh/include/asm/topology.h diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h index beea4e6f8dfd..beea4e6f8dfd 100644 --- a/include/asm-sh/types.h +++ b/arch/sh/include/asm/types.h diff --git a/include/asm-sh/uaccess.h b/arch/sh/include/asm/uaccess.h index 45c2c9b2993d..075848f43b6a 100644 --- a/include/asm-sh/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -77,8 +77,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ + __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \ __pu_err; \ }) @@ -86,8 +87,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err = -EFAULT; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ + __put_user_size(__pu_val, __pu_addr, (size), \ __pu_err); \ __pu_err; \ }) diff --git a/include/asm-sh/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h index 892fd6dea9db..ae0d24f6653f 100644 --- a/include/asm-sh/uaccess_32.h +++ b/arch/sh/include/asm/uaccess_32.h @@ -76,8 +76,7 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm((u32)x, ptr, \ - retval, "l"); \ + __put_user_asm(x, ptr, retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ diff --git a/include/asm-sh/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h index 81b3d515fcb3..81b3d515fcb3 100644 --- a/include/asm-sh/uaccess_64.h +++ b/arch/sh/include/asm/uaccess_64.h diff --git a/include/asm-sh/ubc.h b/arch/sh/include/asm/ubc.h index 56f4e30dc49c..a7b9028bbfbb 100644 --- a/include/asm-sh/ubc.h +++ b/arch/sh/include/asm/ubc.h @@ -12,7 +12,7 @@ #define __ASM_SH_UBC_H #ifdef __KERNEL__ -#include <asm/cpu/ubc.h> +#include <cpu/ubc.h> /* User Break Controller */ #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h index 202ef1d5a3c4..202ef1d5a3c4 100644 --- a/include/asm-sh/ucontext.h +++ b/arch/sh/include/asm/ucontext.h diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h index c1641a01d50f..c1641a01d50f 100644 --- a/include/asm-sh/unaligned.h +++ b/arch/sh/include/asm/unaligned.h diff --git a/include/asm-sh/unistd.h b/arch/sh/include/asm/unistd.h index 65be656ead7d..65be656ead7d 100644 --- a/include/asm-sh/unistd.h +++ b/arch/sh/include/asm/unistd.h diff --git a/include/asm-sh/unistd_32.h b/arch/sh/include/asm/unistd_32.h index d52c000cf924..d52c000cf924 100644 --- a/include/asm-sh/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h diff --git a/include/asm-sh/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 7c54e91753c1..7c54e91753c1 100644 --- a/include/asm-sh/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h index 8fd3cf6c58d4..8fd3cf6c58d4 100644 --- a/include/asm-sh/user.h +++ b/arch/sh/include/asm/user.h diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h index 06a5de8ace1a..06a5de8ace1a 100644 --- a/include/asm-sh/vga.h +++ b/arch/sh/include/asm/vga.h diff --git a/include/asm-sh/watchdog.h b/arch/sh/include/asm/watchdog.h index d19ea62ef8c6..f024fed00a72 100644 --- a/include/asm-sh/watchdog.h +++ b/arch/sh/include/asm/watchdog.h @@ -13,11 +13,11 @@ #ifdef __KERNEL__ #include <linux/types.h> -#include <asm/cpu/watchdog.h> +#include <cpu/watchdog.h> #include <asm/io.h> /* - * See asm/cpu-sh2/watchdog.h for explanation of this stupidity.. + * See cpu-sh2/watchdog.h for explanation of this stupidity.. */ #ifndef WTCNT_R # define WTCNT_R WTCNT diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h index c82eb12a5b18..c82eb12a5b18 100644 --- a/include/asm-sh/xor.h +++ b/arch/sh/include/asm/xor.h diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h index 2b9ab93efa4e..2b9ab93efa4e 100644 --- a/include/asm-sh/cpu-sh2/addrspace.h +++ b/arch/sh/include/cpu-common/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h index 2979efb26de3..c3db00b73605 100644 --- a/include/asm-sh/cpu-sh2/cacheflush.h +++ b/arch/sh/include/cpu-common/cpu/cacheflush.h @@ -10,7 +10,7 @@ #ifndef __ASM_CPU_SH2_CACHEFLUSH_H #define __ASM_CPU_SH2_CACHEFLUSH_H -/* +/* * Cache flushing: * * - flush_cache_all() flushes entire cache @@ -40,5 +40,5 @@ #define flush_cache_sigtramp(vaddr) do { } while (0) #define p3_cache_init() do { } while (0) -#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h index beeb299e01ec..beeb299e01ec 100644 --- a/include/asm-sh/cpu-sh2/mmu_context.h +++ b/arch/sh/include/cpu-common/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h index 39e2d6e94782..39e2d6e94782 100644 --- a/include/asm-sh/cpu-sh2/rtc.h +++ b/arch/sh/include/cpu-common/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h index fe5c15dd6e87..fe5c15dd6e87 100644 --- a/include/asm-sh/cpu-sh2/sigcontext.h +++ b/arch/sh/include/cpu-common/cpu/sigcontext.h diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h index a39c241e8195..a39c241e8195 100644 --- a/include/asm-sh/cpu-sh2/timer.h +++ b/arch/sh/include/cpu-common/cpu/timer.h diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h index 4e0b16500686..4e0b16500686 100644 --- a/include/asm-sh/cpu-sh2/cache.h +++ b/arch/sh/include/cpu-sh2/cpu/cache.h diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h index d66b43cdc637..d66b43cdc637 100644 --- a/include/asm-sh/cpu-sh2/dma.h +++ b/arch/sh/include/cpu-sh2/cpu/dma.h diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h index 31de475da70b..31de475da70b 100644 --- a/include/asm-sh/cpu-sh2/freq.h +++ b/arch/sh/include/cpu-sh2/cpu/freq.h diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h index ba0e87f19c7a..ba0e87f19c7a 100644 --- a/include/asm-sh/cpu-sh2/ubc.h +++ b/arch/sh/include/cpu-sh2/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h index 393161c9c6d0..393161c9c6d0 100644 --- a/include/asm-sh/cpu-sh2/watchdog.h +++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h index afe228b3f493..afe228b3f493 100644 --- a/include/asm-sh/cpu-sh2a/cache.h +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h new file mode 100644 index 000000000000..27a13ef4fdfc --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/dma.h> diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h index 830fd43b6cdc..830fd43b6cdc 100644 --- a/include/asm-sh/cpu-sh2a/freq.h +++ b/arch/sh/include/cpu-sh2a/cpu/freq.h diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h index afb511e2bed7..afb511e2bed7 100644 --- a/include/asm-sh/cpu-sh2a/rtc.h +++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h new file mode 100644 index 000000000000..8ce2fc1cf625 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/ubc.h> diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h new file mode 100644 index 000000000000..e7e8259e468c --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/watchdog.h> diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h index b289e3ca19a6..b289e3ca19a6 100644 --- a/include/asm-sh/cpu-sh3/adc.h +++ b/arch/sh/include/cpu-sh3/cpu/adc.h diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h index bee2d81c56bf..bee2d81c56bf 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/arch/sh/include/cpu-sh3/cpu/cache.h diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h new file mode 100644 index 000000000000..abc909880807 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -0,0 +1,36 @@ +/* + * include/asm-sh/cpu-sh3/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHEFLUSH_H +#define __ASM_CPU_SH3_CACHEFLUSH_H + +#if defined(CONFIG_SH7705_CACHE_32KB) +/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the + * SH4. Unlike the SH4 this is a unified cache so we need to do some work + * in mmap when 'exec'ing a new binary + */ + /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ +#define CACHE_ALIAS 0x00001000 + +#define PG_mapped PG_arch_1 + +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +void flush_dcache_page(struct page *pg); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); +#else +#include <cpu-common/cpu/cacheflush.h> +#endif + +#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h index 05fda8316ebc..05fda8316ebc 100644 --- a/include/asm-sh/cpu-sh3/dac.h +++ b/arch/sh/include/cpu-sh3/cpu/dac.h diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h index 6813c3220a1d..6813c3220a1d 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/arch/sh/include/cpu-sh3/cpu/dma.h diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h index 53c62302b2e3..53c62302b2e3 100644 --- a/include/asm-sh/cpu-sh3/freq.h +++ b/arch/sh/include/cpu-sh3/cpu/freq.h diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h index 4e53eb314b8f..4e53eb314b8f 100644 --- a/include/asm-sh/cpu-sh3/gpio.h +++ b/arch/sh/include/cpu-sh3/cpu/gpio.h diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h index ab09da73ce77..ab09da73ce77 100644 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h index 793acf12aa08..793acf12aa08 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/arch/sh/include/cpu-sh3/cpu/timer.h diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h index 4e6381d5ff7a..4e6381d5ff7a 100644 --- a/include/asm-sh/cpu-sh3/ubc.h +++ b/arch/sh/include/cpu-sh3/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h index 4ee0347298d8..4ee0347298d8 100644 --- a/include/asm-sh/cpu-sh3/watchdog.h +++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h index a3fa733c1c7d..a3fa733c1c7d 100644 --- a/include/asm-sh/cpu-sh4/addrspace.h +++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h index 1c61ebf5c8e3..1c61ebf5c8e3 100644 --- a/include/asm-sh/cpu-sh4/cache.h +++ b/arch/sh/include/cpu-sh4/cpu/cache.h diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h index 065306d376eb..065306d376eb 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h index 71b426a6e482..71b426a6e482 100644 --- a/include/asm-sh/cpu-sh4/dma-sh7780.h +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h diff --git a/include/asm-sh/cpu-sh4/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h index aaf71b018c28..235b7cd1fc9a 100644 --- a/include/asm-sh/cpu-sh4/dma.h +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -20,7 +20,7 @@ #define CHCR_TS_MASK 0x18 #define CHCR_TS_SHIFT 3 -#include <asm/cpu/dma-sh7780.h> +#include <cpu/dma-sh7780.h> #else #define SH_DMAC_BASE 0xffa00000 diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h index febef7342528..febef7342528 100644 --- a/include/asm-sh/cpu-sh4/fpu.h +++ b/arch/sh/include/cpu-sh4/cpu/fpu.h diff --git a/include/asm-sh/cpu-sh4/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h index c23af81c2e70..c23af81c2e70 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/arch/sh/include/cpu-sh4/cpu/freq.h diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h index 9ea8eb27b18e..9ea8eb27b18e 100644 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h index 25b1e6adfe8c..25b1e6adfe8c 100644 --- a/include/asm-sh/cpu-sh4/rtc.h +++ b/arch/sh/include/cpu-sh4/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h index ab392f120e06..ab392f120e06 100644 --- a/include/asm-sh/cpu-sh4/sigcontext.h +++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h index 586d6491816a..586d6491816a 100644 --- a/include/asm-sh/cpu-sh4/sq.h +++ b/arch/sh/include/cpu-sh4/cpu/sq.h diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h index d1e796b96888..d1e796b96888 100644 --- a/include/asm-sh/cpu-sh4/timer.h +++ b/arch/sh/include/cpu-sh4/cpu/timer.h diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h index c86e17050935..c86e17050935 100644 --- a/include/asm-sh/cpu-sh4/ubc.h +++ b/arch/sh/include/cpu-sh4/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h index 259f6a0ce23d..259f6a0ce23d 100644 --- a/include/asm-sh/cpu-sh4/watchdog.h +++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h index dc36b9a03af6..dc36b9a03af6 100644 --- a/include/asm-sh/cpu-sh5/addrspace.h +++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h index ed050ab526f2..ed050ab526f2 100644 --- a/include/asm-sh/cpu-sh5/cache.h +++ b/arch/sh/include/cpu-sh5/cpu/cache.h diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h index 5a11f0b7e66a..5a11f0b7e66a 100644 --- a/include/asm-sh/cpu-sh5/cacheflush.h +++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h index 7bf6bb3d35ed..7bf6bb3d35ed 100644 --- a/include/asm-sh/cpu-sh5/dma.h +++ b/arch/sh/include/cpu-sh5/cpu/dma.h diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h index f0f0756e6e84..f0f0756e6e84 100644 --- a/include/asm-sh/cpu-sh5/irq.h +++ b/arch/sh/include/cpu-sh5/cpu/irq.h diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h index 68a1d2cff457..68a1d2cff457 100644 --- a/include/asm-sh/cpu-sh5/mmu_context.h +++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h index 6664ea6f1566..6664ea6f1566 100644 --- a/include/asm-sh/cpu-sh5/registers.h +++ b/arch/sh/include/cpu-sh5/cpu/registers.h diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h index 12ea0ed144e1..12ea0ed144e1 100644 --- a/include/asm-sh/cpu-sh5/rtc.h +++ b/arch/sh/include/cpu-sh5/cpu/rtc.h diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h index ddd68e788705..ddd68e788705 100644 --- a/include/asm-sh/dreamcast/dma.h +++ b/arch/sh/include/mach-dreamcast/mach/dma.h diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h index 51f6a87f1f11..51f6a87f1f11 100644 --- a/include/asm-sh/dreamcast/maple.h +++ b/arch/sh/include/mach-dreamcast/mach/maple.h diff --git a/include/asm-sh/dreamcast/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h index e401b24b0d8e..75fc9009e092 100644 --- a/include/asm-sh/dreamcast/pci.h +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -11,7 +11,7 @@ #ifndef __ASM_SH_DREAMCAST_PCI_H #define __ASM_SH_DREAMCAST_PCI_H -#include <asm/mach/sysasic.h> +#include <mach-dreamcast/mach/sysasic.h> #define GAPSPCI_REGS 0x01001400 #define GAPSPCI_DMA_BASE 0x01840000 diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h index f33426608a87..f33426608a87 100644 --- a/include/asm-sh/dreamcast/sysasic.h +++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h index 35d7368b718a..35d7368b718a 100644 --- a/include/asm-sh/landisk/gio.h +++ b/arch/sh/include/mach-landisk/mach/gio.h diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h index 6fb04ab38b9f..6fb04ab38b9f 100644 --- a/include/asm-sh/landisk/iodata_landisk.h +++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h diff --git a/include/asm-sh/se.h b/arch/sh/include/mach-se/mach/se.h index eb23000e1bbe..eb23000e1bbe 100644 --- a/include/asm-sh/se.h +++ b/arch/sh/include/mach-se/mach/se.h diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h index 698eb80389ab..698eb80389ab 100644 --- a/include/asm-sh/se7206.h +++ b/arch/sh/include/mach-se/mach/se7206.h diff --git a/include/asm-sh/se7343.h b/arch/sh/include/mach-se/mach/se7343.h index 98458460e632..98458460e632 100644 --- a/include/asm-sh/se7343.h +++ b/arch/sh/include/mach-se/mach/se7343.h diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h index b957f6041193..b957f6041193 100644 --- a/include/asm-sh/se7721.h +++ b/arch/sh/include/mach-se/mach/se7721.h diff --git a/include/asm-sh/se7722.h b/arch/sh/include/mach-se/mach/se7722.h index e971d9a82f4a..e971d9a82f4a 100644 --- a/include/asm-sh/se7722.h +++ b/arch/sh/include/mach-se/mach/se7722.h diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h index b36792ac5d66..b36792ac5d66 100644 --- a/include/asm-sh/se7751.h +++ b/arch/sh/include/mach-se/mach/se7751.h diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h index 40e9b41458cd..40e9b41458cd 100644 --- a/include/asm-sh/se7780.h +++ b/arch/sh/include/mach-se/mach/se7780.h diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h index c39c785bba94..c39c785bba94 100644 --- a/include/asm-sh/sh03/io.h +++ b/arch/sh/include/mach-sh03/mach/io.h diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h index 19c40b80428d..19c40b80428d 100644 --- a/include/asm-sh/sh03/sh03.h +++ b/arch/sh/include/mach-sh03/mach/sh03.h diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/sh/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index d3d9f3204230..bea40339919b 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -80,11 +80,11 @@ static int __init cf_init_default(void) } #if defined(CONFIG_SH_SOLUTION_ENGINE) -#include <asm/se.h> +#include <mach-se/mach/se.h> #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) -#include <asm/se7722.h> +#include <mach-se/mach/se7722.h> #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE) -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> #endif /* diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 79baa47af977..726f0335da76 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/bitops.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/page.h> /* diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee894e5a45e7..becc54c45692 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -14,7 +14,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/unistd.h> #include <asm/errno.h> #include <asm/page.h> diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S index 47096dc3d206..ab3903eeda5c 100644 --- a/arch/sh/kernel/cpu/sh2a/entry.S +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -14,7 +14,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/unistd.h> #include <asm/errno.h> #include <asm/page.h> diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 4004073f98cd..3fe482dd05c1 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -14,7 +14,7 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/unistd.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/page.h> ! NOTE: diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 8020796139f1..2d452f67fb87 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -13,7 +13,7 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/io.h> -#include <asm/cpu/fpu.h> +#include <cpu/fpu.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/fpu.h> diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c index 7b2d337ee412..828cb57cb959 100644 --- a/arch/sh/kernel/cpu/sh4/softfloat.c +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -36,7 +36,7 @@ * and Kamel Khelifi <kamel.khelifi@st.com> */ #include <linux/kernel.h> -#include <asm/cpu/fpu.h> +#include <cpu/fpu.h> #define LIT64( a ) a##LL diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 9561b02ade0e..dcdf959a3d44 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -22,7 +22,7 @@ #include <linux/io.h> #include <asm/page.h> #include <asm/cacheflush.h> -#include <asm/cpu/sq.h> +#include <cpu/sq.h> struct sq_mapping; diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 05372ed6c568..ca08e7f26a3a 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -11,7 +11,7 @@ */ #include <linux/errno.h> #include <linux/sys.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> #include <asm/processor.h> #include <asm/unistd.h> #include <asm/thread_info.h> diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index f42d4c0feb76..7ccfb995a398 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -11,8 +11,8 @@ #include <asm/page.h> #include <asm/cache.h> #include <asm/tlb.h> -#include <asm/cpu/registers.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/registers.h> +#include <cpu/mmu_context.h> #include <asm/thread_info.h> /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index a2a99e487e33..64b7690c664c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -15,7 +15,7 @@ #include <asm/machvec.h> #include <asm/uaccess.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> atomic_t irq_err_count; diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 022a55f1c1d4..791edabf7d83 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -33,8 +33,8 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/platform_device.h> -#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */ -#include <asm/cpu/irq.h> +#include <cpu/registers.h> /* required by inline __asm__ stmt. */ +#include <cpu/irq.h> #include <asm/addrspace.h> #include <asm/processor.h> #include <asm/uaccess.h> diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index ff559e2a96f7..da32ba7b5fcc 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -8,7 +8,7 @@ #include <linux/kernel.h> #include <asm/io.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> /* THIS IS A PHYSICAL ADDRESS */ #define HDSP2534_ADDR (0x04002100) diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c index 399d53710d2f..bd63b961b2a9 100644 --- a/arch/sh/mm/fault_64.c +++ b/arch/sh/mm/fault_64.c @@ -39,7 +39,7 @@ #include <asm/uaccess.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> /* Callable from fault.c, so not static */ inline void __do_tlb_refill(unsigned long address, diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b58acc..b5d202be8206 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 5047490fc299..d741f35d7b3a 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data) if (tty == NULL) return IRQ_NONE; - if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && - (tty->ldisc.write_wakeup != NULL)) - (tty->ldisc.write_wakeup)(tty); - - /* - * BLOCKING mode - * In blocking mode, everything sleeps on tty->write_wait. - * Sleeping in the console driver would break non-blocking - * writes. - */ - - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); return IRQ_HANDLED; } diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index 1fa8be5bd217..eaff0bbb1444 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -99,3 +99,4 @@ int is_uv_system(void) { return uv_system_type != UV_NONE; } +EXPORT_SYMBOL_GPL(is_uv_system); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 8dbffb846de9..87d4d6964ec2 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void) pci_swiotlb_init(); } + +unsigned long iommu_num_pages(unsigned long addr, unsigned long len) +{ + unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE); + + return size >> PAGE_SHIFT; +} +EXPORT_SYMBOL(iommu_num_pages); #endif /* diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index b520dae02bf4..2d888586385d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -788,10 +788,6 @@ void __init setup_arch(char **cmdline_p) initmem_init(0, max_pfn); -#ifdef CONFIG_X86_64 - dma32_reserve_bootmem(); -#endif - #ifdef CONFIG_ACPI_SLEEP /* * Reserve low memory region for sleep support. @@ -806,6 +802,15 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); +#ifdef CONFIG_X86_64 + /* + * dma32_reserve_bootmem() allocates bootmem which may conflict + * with the crashkernel command line, so do that after + * reserve_crashkernel() + */ + dma32_reserve_bootmem(); +#endif + reserve_ibft_region(); #ifdef CONFIG_KVM_CLOCK diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index dfdf428975c0..f118c110af32 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -52,7 +52,7 @@ jnz 100b 102: .section .fixup,"ax" -103: addl %r8d,%edx /* ecx is zerorest also */ +103: addl %ecx,%edx /* ecx is zerorest also */ jmp copy_user_handle_tail .previous diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S index 40e0e309d27e..cb0c112386fb 100644 --- a/arch/x86/lib/copy_user_nocache_64.S +++ b/arch/x86/lib/copy_user_nocache_64.S @@ -32,7 +32,7 @@ jnz 100b 102: .section .fixup,"ax" -103: addl %r8d,%edx /* ecx is zerorest also */ +103: addl %ecx,%edx /* ecx is zerorest also */ jmp copy_user_handle_tail .previous @@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache) jmp 60f 50: movl %ecx,%edx 60: sfence - movl %r8d,%ecx jmp copy_user_handle_tail .previous diff --git a/drivers/Makefile b/drivers/Makefile index 54ec5e718c0e..a280ab3d0833 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -97,3 +97,4 @@ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ +obj-$(CONFIG_REGULATOR) += regulator/ diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index b4749969c6b4..0133af49cf06 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -64,7 +64,13 @@ static DEFINE_MUTEX(performance_mutex); * policy is adjusted accordingly. */ -static unsigned int ignore_ppc = 0; +/* ignore_ppc: + * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet + * ignore _PPC + * 0 -> cpufreq low level drivers initialized -> consider _PPC values + * 1 -> ignore _PPC totally -> forced by user through boot param + */ +static unsigned int ignore_ppc = -1; module_param(ignore_ppc, uint, 0644); MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ "limited by BIOS, this should help"); @@ -72,7 +78,7 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ #define PPC_REGISTERED 1 #define PPC_IN_USE 2 -static int acpi_processor_ppc_status = 0; +static int acpi_processor_ppc_status; static int acpi_processor_ppc_notifier(struct notifier_block *nb, unsigned long event, void *data) @@ -81,13 +87,18 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, struct acpi_processor *pr; unsigned int ppc = 0; - if (ignore_ppc) + if (event == CPUFREQ_START && ignore_ppc <= 0) { + ignore_ppc = 0; return 0; + } - mutex_lock(&performance_mutex); + if (ignore_ppc) + return 0; if (event != CPUFREQ_INCOMPATIBLE) - goto out; + return 0; + + mutex_lock(&performance_mutex); pr = per_cpu(processors, policy->cpu); if (!pr || !pr->performance) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 24df73ad326d..088885ed51b9 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) { } iavcc_r->vc_desc_cnt--; dev->desc_tbl[desc1 -1].timestamp = 0; - IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", - (u32)dev->desc_tbl[desc1 -1].txskb, desc1);) + IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n", + dev->desc_tbl[desc1 -1].txskb, desc1);) if (iavcc_r->pcr < dev->rate_limit) { IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE; if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0) @@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { inc = 0; testSlot = idealSlot; TstSchedTbl = (u16*)(SchedTbl+testSlot); //set index and read in value - IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n", - testSlot, (u32)TstSchedTbl,toBeAssigned);) + IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n", + testSlot, TstSchedTbl,toBeAssigned);) memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); while (cbrVC) // If another VC at this location, we have to keep looking { @@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { testSlot = idealSlot - inc; if (testSlot < 0) { // Wrap if necessary testSlot += dev->CbrTotEntries; - IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n", - (u32)SchedTbl,testSlot);) + IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n", + SchedTbl,testSlot);) } TstSchedTbl = (u16 *)(SchedTbl + testSlot); // set table index memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); @@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { } // set table index and read in value TstSchedTbl = (u16*)(SchedTbl + testSlot); - IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n", - (u32)TstSchedTbl,cbrVC,inc);) + IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n", + TstSchedTbl,cbrVC,inc);) memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); } /* while */ // Move this VCI number into this location of the CBR Sched table. @@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev) /* We know this is 32bit bus addressed so the following is safe */ writel(iadev->rx_dle_dma & 0xfffff000, iadev->dma + IPHASE5575_RX_LIST_ADDR); - IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", - (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), + IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n", + iadev->dma+IPHASE5575_TX_LIST_ADDR, *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR)); - printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", - (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), + printk("Rx Dle list addr: 0x%p value: 0x%0x\n", + iadev->dma+IPHASE5575_RX_LIST_ADDR, *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));) writew(0xffff, iadev->reass_reg+REASS_MASK_REG); @@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev) buf_desc_ptr++; rx_pkt_start += iadev->rx_buf_sz; } - IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));) + IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);) i = FREE_BUF_DESC_Q*iadev->memSize; writew(i >> 16, iadev->reass_reg+REASS_QUEUE_BASE); writew(i, iadev->reass_reg+FREEQ_ST_ADR); @@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev) *freeq_start = (u_short)i; freeq_start++; } - IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);) + IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);) /* Packet Complete Queue */ i = (PKT_COMP_Q * iadev->memSize) & 0xffff; writew(i, iadev->reass_reg+PCQ_ST_ADR); @@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev) IA_SKB_STATE(skb) |= IA_DLED; skb_queue_tail(&iavcc->txing_skb, skb); } - IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);) + IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);) if (++dle == iadev->tx_dle_q.end) dle = iadev->tx_dle_q.start; } @@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev) writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR; tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1; writew(tmp16, iadev->seg_reg+CBR_TAB_END); - IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n", - (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));) + IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n", + iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));) IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n", readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END), readw(iadev->seg_reg+CBR_TAB_END+1));) @@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) { /* Put the packet in a tx buffer */ trailer = iadev->tx_buf[desc-1].cpcs; - IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n", - (u32)skb, (u32)skb->data, skb->len, desc);) + IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n", + skb, skb->data, skb->len, desc);) trailer->control = 0; /*big endian*/ trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8); @@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev, } dev->dev_data = iadev; IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);) - IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev, + IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev, iadev->LineRate);) pci_set_drvdata(pdev, dev); diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 192522ebb771..c33bb59ed1fa 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -134,6 +134,13 @@ static struct usb_device_id blacklist_ids[] = { /* Dell laptop with Broadcom chip */ { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + /* Dell Wireless 370 */ + { USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + /* Dell Wireless 410 */ + { USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + + /* Broadcom 2046 */ + { USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET }, /* Microsoft Wireless Transceiver for Bluetooth 2.0 */ { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET }, diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 71ec426ecffc..1e0455bd6df9 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -39,8 +39,8 @@ #include <asm/io.h> #include <asm/dma.h> #include <asm/delay.h> -#include <asm/mach/dma.h> -#include <asm/mach/sysasic.h> +#include <mach/dma.h> +#include <mach/sysasic.h> #define GDROM_DEV_NAME "gdrom" #define GD_SESSION_OFFSET 150 diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 192688344ed2..f52931e1c16e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -66,8 +66,8 @@ #include <linux/ctype.h> #ifdef CONFIG_PPC_OF -#include <asm/of_device.h> -#include <asm/of_platform.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #endif #define PFX "ipmi_si: " diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index e30575e87648..b638403e8e9c 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1612,8 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) switch (cmd) { case MOXA_GET_MAJOR: - printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix " - "your userspace\n", current->comm, cmd); + if (printk_ratelimit()) + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); return put_user(ttymajor, (int __user *)argp); case MOXA_CHKPORTENABLE: diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 8d6a3ff02672..8a67f16987db 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) policy->user_policy.min = policy->cpuinfo.min_freq; policy->user_policy.max = policy->cpuinfo.max_freq; + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_START, policy); + #ifdef CONFIG_SMP #ifdef CONFIG_HOTPLUG_CPU diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index 11f17440fea6..d53fbbfefa3e 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -81,4 +81,3 @@ void __init reserve_ibft_region(void) if (ibft_addr) reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT); } -EXPORT_SYMBOL_GPL(reserve_ibft_region); diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 00ff53348491..c882fd05cf29 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -394,13 +394,24 @@ config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. - - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Dallas Semiconductor DS75 and DS1775 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75 + - NXP's LM75A + - ST Microelectronics STDS75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 + + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index ce4a7cb5a116..3a0b63136479 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473); #define ADT7473_REG_BASE_ADDR 0x20 #define ADT7473_REG_VOLT_BASE_ADDR 0x21 -#define ADT7473_REG_VOLT_MAX_ADDR 0x22 #define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46 -#define ADT7473_REG_VOLT_MIN_MAX_ADDR 0x49 #define ADT7473_REG_TEMP_BASE_ADDR 0x25 -#define ADT7473_REG_TEMP_MAX_ADDR 0x27 #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E -#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR 0x53 #define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67 -#define ADT7473_REG_TEMP_TMIN_MAX_ADDR 0x69 #define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A -#define ADT7473_REG_TEMP_TMAX_MAX_ADDR 0x6C #define ADT7473_REG_FAN_BASE_ADDR 0x28 -#define ADT7473_REG_FAN_MAX_ADDR 0x2F #define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54 -#define ADT7473_REG_FAN_MIN_MAX_ADDR 0x5B #define ADT7473_REG_PWM_BASE_ADDR 0x30 -#define ADT7473_REG_PWM_MAX_ADDR 0x32 #define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64 -#define ADT7473_REG_PWM_MIN_MAX_ADDR 0x66 #define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38 -#define ADT7473_REG_PWM_MAX_MAX_ADDR 0x3A #define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C -#define ADT7473_REG_PWM_BHVR_MAX_ADDR 0x5E #define ADT7473_PWM_BHVR_MASK 0xE0 #define ADT7473_PWM_BHVR_SHIFT 5 @@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473); #define ADT7473_FAN4_ALARM 0x20 #define ADT7473_R1T_SHORT 0x40 #define ADT7473_R2T_SHORT 0x80 -#define ADT7473_REG_MAX_ADDR 0x80 #define ALARM2(x) ((x) << 8) @@ -583,10 +570,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10); - temp = temp && 0xFF; mutex_lock(&data->lock); - data->max_duty_at_overheat = temp; + data->max_duty_at_overheat = !!temp; reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); if (temp) reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT; diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 7673f65877e1..5e2cf0aef480 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -48,6 +48,11 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); +static int probe_all_addr; +module_param(probe_all_addr, bool, 0); +MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " + "addresses"); + /* Addresses to scan */ static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; @@ -176,6 +181,7 @@ struct dme1737_data { int valid; /* !=0 if following fields are valid */ unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ + enum chips type; u8 vid; u8 pwm_rr_en; @@ -210,20 +216,27 @@ struct dme1737_data { }; /* Nominal voltage values */ -static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300}; +static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, + 3300}; +static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, + 3300}; +#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \ + IN_NOMINAL_DME1737[(ix)] : \ + IN_NOMINAL_SCH311x[(ix)]) /* Voltage input * Voltage inputs have 16 bits resolution, limit values have 8 bits * resolution. */ -static inline int IN_FROM_REG(int reg, int ix, int res) +static inline int IN_FROM_REG(int reg, int ix, int res, int type) { - return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2)); + return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) / + (3 << (res - 2)); } -static inline int IN_TO_REG(int val, int ix) +static inline int IN_TO_REG(int val, int ix, int type) { - return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) / - IN_NOMINAL[ix], 0, 255); + return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) / + IN_NOMINAL(ix, type), 0, 255); } /* Temperature input @@ -722,13 +735,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, switch (fn) { case SYS_IN_INPUT: - res = IN_FROM_REG(data->in[ix], ix, 16); + res = IN_FROM_REG(data->in[ix], ix, 16, data->type); break; case SYS_IN_MIN: - res = IN_FROM_REG(data->in_min[ix], ix, 8); + res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type); break; case SYS_IN_MAX: - res = IN_FROM_REG(data->in_max[ix], ix, 8); + res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type); break; case SYS_IN_ALARM: res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; @@ -755,12 +768,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); switch (fn) { case SYS_IN_MIN: - data->in_min[ix] = IN_TO_REG(val, ix); + data->in_min[ix] = IN_TO_REG(val, ix, data->type); dme1737_write(client, DME1737_REG_IN_MIN(ix), data->in_min[ix]); break; case SYS_IN_MAX: - data->in_max[ix] = IN_TO_REG(val, ix); + data->in_max[ix] = IN_TO_REG(val, ix, data->type); dme1737_write(client, DME1737_REG_IN_MAX(ix), data->in_max[ix]); break; @@ -1501,9 +1514,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3); /* PWMs 5-6 */ #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \ -static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \ +static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ show_pwm, set_pwm, SYS_PWM, ix-1); \ -static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ show_pwm, NULL, SYS_PWM_ENABLE, ix-1) @@ -1517,91 +1530,75 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */ -#define SENSOR_DEV_ATTR_IN(ix) \ -&sensor_dev_attr_in##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_max.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_alarm.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \ -&sensor_dev_attr_temp##ix##_offset.dev_attr.attr - -#define SENSOR_DEV_ATTR_TEMP(ix) \ -SENSOR_DEV_ATTR_TEMP_LOCK(ix), \ -&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_fault.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \ -&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr - -#define SENSOR_DEV_ATTR_ZONE(ix) \ -SENSOR_DEV_ATTR_ZONE_LOCK(ix), \ -&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr - -#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \ -&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_type.dev_attr.attr - -#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \ -&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_max.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \ -&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr - -#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \ -SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \ -&sensor_dev_attr_pwm##ix.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \ -&sensor_dev_attr_pwm##ix.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr - -#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \ -SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \ -&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr - /* This struct holds all the attributes that are always present and need to be * created unconditionally. The attributes that need modification of their * permissions are created read-only and write permissions are added or removed * on the fly when required */ static struct attribute *dme1737_attr[] ={ /* Voltages */ - SENSOR_DEV_ATTR_IN(0), - SENSOR_DEV_ATTR_IN(1), - SENSOR_DEV_ATTR_IN(2), - SENSOR_DEV_ATTR_IN(3), - SENSOR_DEV_ATTR_IN(4), - SENSOR_DEV_ATTR_IN(5), - SENSOR_DEV_ATTR_IN(6), + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, /* Temperatures */ - SENSOR_DEV_ATTR_TEMP(1), - SENSOR_DEV_ATTR_TEMP(2), - SENSOR_DEV_ATTR_TEMP(3), + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - SENSOR_DEV_ATTR_ZONE(1), - SENSOR_DEV_ATTR_ZONE(2), - SENSOR_DEV_ATTR_ZONE(3), + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, /* Misc */ &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, @@ -1616,23 +1613,48 @@ static const struct attribute_group dme1737_group = { * Their creation depends on the chip configuration which is determined during * module load. */ static struct attribute *dme1737_attr_pwm1[] = { - SENSOR_DEV_ATTR_PWM_1TO3(1), + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm2[] = { - SENSOR_DEV_ATTR_PWM_1TO3(2), + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm3[] = { - SENSOR_DEV_ATTR_PWM_1TO3(3), + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm5[] = { - SENSOR_DEV_ATTR_PWM_5TO6(5), + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, + &sensor_dev_attr_pwm5_enable.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm6[] = { - SENSOR_DEV_ATTR_PWM_5TO6(6), + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, + &sensor_dev_attr_pwm6_enable.dev_attr.attr, NULL }; @@ -1649,27 +1671,45 @@ static const struct attribute_group dme1737_pwm_group[] = { * Their creation depends on the chip configuration which is determined during * module load. */ static struct attribute *dme1737_attr_fan1[] = { - SENSOR_DEV_ATTR_FAN_1TO4(1), + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan2[] = { - SENSOR_DEV_ATTR_FAN_1TO4(2), + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan3[] = { - SENSOR_DEV_ATTR_FAN_1TO4(3), + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan4[] = { - SENSOR_DEV_ATTR_FAN_1TO4(4), + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan5[] = { - SENSOR_DEV_ATTR_FAN_5TO6(5), + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_max.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan6[] = { - SENSOR_DEV_ATTR_FAN_5TO6(6), + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_max.dev_attr.attr, NULL }; @@ -1686,13 +1726,22 @@ static const struct attribute_group dme1737_fan_group[] = { * writeable if the chip is *not* locked. Otherwise they stay read-only. */ static struct attribute *dme1737_attr_lock[] = { /* Temperatures */ - SENSOR_DEV_ATTR_TEMP_LOCK(1), - SENSOR_DEV_ATTR_TEMP_LOCK(2), - SENSOR_DEV_ATTR_TEMP_LOCK(3), + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - SENSOR_DEV_ATTR_ZONE_LOCK(1), - SENSOR_DEV_ATTR_ZONE_LOCK(2), - SENSOR_DEV_ATTR_ZONE_LOCK(3), + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; @@ -1704,23 +1753,40 @@ static const struct attribute_group dme1737_lock_group = { * writeable if the chip is *not* locked and the respective PWM is available. * Otherwise they stay read-only. */ static struct attribute *dme1737_attr_pwm1_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1), + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm2_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2), + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm3_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3), + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm5_lock[] = { - SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5), + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm6_lock[] = { - SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6), + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, NULL }; @@ -2109,6 +2175,7 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, kind = dme1737; name = "dme1737"; + data->type = kind; /* Fill in the remaining client fields and put it into the global * list */ @@ -2301,6 +2368,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) err = -ENODEV; goto exit_kfree; } + data->type = -1; /* Fill in the remaining client fields and initialize the mutex */ strlcpy(client->name, "sch311x", I2C_NAME_SIZE); @@ -2377,7 +2445,10 @@ static int __init dme1737_init(void) } if (dme1737_isa_detect(0x2e, &addr) && - dme1737_isa_detect(0x4e, &addr)) { + dme1737_isa_detect(0x4e, &addr) && + (!probe_all_addr || + (dme1737_isa_detect(0x162e, &addr) && + dme1737_isa_detect(0x164e, &addr)))) { /* Return 0 if we didn't find an ISA device */ return 0; } diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index de698dc73020..7880c273c2c5 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -30,14 +30,37 @@ #include "lm75.h" -/* Addresses to scan */ +/* + * This driver handles the LM75 and compatible digital temperature sensors. + * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be + * listed here. We start at 9 since I2C_CLIENT_INSMOD_*() currently allow + * definition of up to 8 chip types (plus zero). + */ + +enum lm75_type { /* keep sorted in alphabetical order */ + ds1775 = 9, + ds75, + /* lm75 -- in I2C_CLIENT_INSMOD_1() */ + lm75a, + max6625, + max6626, + mcp980x, + stds75, + tcn75, + tmp100, + tmp101, + tmp175, + tmp275, + tmp75, +}; + +/* Addresses scanned by legacy style driver binding */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -/* Insmod parameters */ +/* Insmod parameters (only for legacy style driver binding) */ I2C_CLIENT_INSMOD_1(lm75); -/* Many LM75 constants specified below */ /* The LM75 registers */ #define LM75_REG_CONF 0x01 @@ -49,10 +72,11 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { - struct i2c_client client; - struct device *hwmon_dev; + struct i2c_client *client; + struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + u8 orig_conf; + char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ u16 temp[3]; /* Register values, 0 = input @@ -60,23 +84,14 @@ struct lm75_data { 2 = hyst */ }; -static int lm75_attach_adapter(struct i2c_adapter *adapter); -static int lm75_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm75_init_client(struct i2c_client *client); -static int lm75_detach_client(struct i2c_client *client); static int lm75_read_value(struct i2c_client *client, u8 reg); static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm75_data *lm75_update_device(struct device *dev); -/* This is the driver that will be inserted */ -static struct i2c_driver lm75_driver = { - .driver = { - .name = "lm75", - }, - .attach_adapter = lm75_attach_adapter, - .detach_client = lm75_detach_client, -}; +/*-----------------------------------------------------------------------*/ + +/* sysfs attributes for hwmon */ static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) @@ -109,13 +124,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); -static int lm75_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm75_detect); -} - static struct attribute *lm75_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -128,32 +136,144 @@ static const struct attribute_group lm75_group = { .attrs = lm75_attributes, }; +/*-----------------------------------------------------------------------*/ + +/* "New style" I2C driver binding -- following the driver model */ + +static int +lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct lm75_data *data; + int status; + u8 set_mask, clr_mask; + int new; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + + data->client = client; + mutex_init(&data->update_lock); + + /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. + * Then tweak to be more precise when appropriate. + */ + set_mask = 0; + clr_mask = (1 << 0) /* continuous conversions */ + | (1 << 6) | (1 << 5); /* 9-bit mode */ + + /* configure as specified */ + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + goto exit_free; + } + data->orig_conf = status; + new = status & ~clr_mask; + new |= set_mask; + if (status != new) + lm75_write_value(client, LM75_REG_CONF, new); + dev_dbg(&client->dev, "Config %02x\n", new); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &lm75_group); + if (status) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + data->hwmon_dev->bus_id, client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &lm75_group); +exit_free: + i2c_set_clientdata(client, NULL); + kfree(data); + return status; +} + +static int lm75_remove(struct i2c_client *client) +{ + struct lm75_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_write_value(client, LM75_REG_CONF, data->orig_conf); + i2c_set_clientdata(client, NULL); + kfree(data); + return 0; +} + +static const struct i2c_device_id lm75_ids[] = { + { "ds1775", ds1775, }, + { "ds75", ds75, }, + { "lm75", lm75, }, + { "lm75a", lm75a, }, + { "max6625", max6625, }, + { "max6626", max6626, }, + { "mcp980x", mcp980x, }, + { "stds75", stds75, }, + { "tcn75", tcn75, }, + { "tmp100", tmp100, }, + { "tmp101", tmp101, }, + { "tmp175", tmp175, }, + { "tmp275", tmp275, }, + { "tmp75", tmp75, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm75_ids); + +static struct i2c_driver lm75_driver = { + .driver = { + .name = "lm75", + }, + .probe = lm75_probe, + .remove = lm75_remove, + .id_table = lm75_ids, +}; + +/*-----------------------------------------------------------------------*/ + +/* "Legacy" I2C driver binding */ + +static struct i2c_driver lm75_legacy_driver; + /* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; - struct lm75_data *data; int err = 0; - const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) goto exit; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm75_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + /* OK. For now, we presume we have a valid address. We create the + client structure, even though there may be no sensor present. + But it allows us to use i2c_smbus_read_*_data() calls. */ + new_client = kzalloc(sizeof *new_client, GFP_KERNEL); + if (!new_client) { err = -ENOMEM; goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; - new_client->driver = &lm75_driver; + new_client->driver = &lm75_legacy_driver; new_client->flags = 0; /* Now, we do the remaining detection. There is no identification- @@ -174,17 +294,17 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) || i2c_smbus_read_word_data(new_client, 5) != hyst || i2c_smbus_read_word_data(new_client, 6) != hyst || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; + goto exit_free; os = i2c_smbus_read_word_data(new_client, 3); if (i2c_smbus_read_word_data(new_client, 4) != os || i2c_smbus_read_word_data(new_client, 5) != os || i2c_smbus_read_word_data(new_client, 6) != os || i2c_smbus_read_word_data(new_client, 7) != os) - goto exit_free; + goto exit_free; /* Unused bits */ if (conf & 0xe0) - goto exit_free; + goto exit_free; /* Addresses cycling */ for (i = 8; i < 0xff; i += 8) @@ -194,58 +314,57 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm75; - - if (kind == lm75) { - name = "lm75"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - mutex_init(&data->update_lock); + /* NOTE: we treat "force=..." and "force_lm75=..." the same. + * Only new-style driver binding distinguishes chip types. + */ + strlcpy(new_client->name, "lm75", I2C_NAME_SIZE); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(new_client); + if (err) goto exit_free; - /* Initialize the LM75 chip */ - lm75_init_client(new_client); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group))) + err = lm75_probe(new_client, NULL); + if (err < 0) goto exit_detach; - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - return 0; -exit_remove: - sysfs_remove_group(&new_client->dev.kobj, &lm75_group); exit_detach: i2c_detach_client(new_client); exit_free: - kfree(data); + kfree(new_client); exit: return err; } +static int lm75_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, lm75_detect); +} + static int lm75_detach_client(struct i2c_client *client) { - struct lm75_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_remove(client); i2c_detach_client(client); - kfree(data); + kfree(client); return 0; } +static struct i2c_driver lm75_legacy_driver = { + .driver = { + .name = "lm75_legacy", + }, + .attach_adapter = lm75_attach_adapter, + .detach_client = lm75_detach_client, +}; + +/*-----------------------------------------------------------------------*/ + +/* register access */ + /* All registers are word-sized, except for the configuration register. LM75 uses a high-byte first convention, which is exactly opposite to the SMBus standard. */ @@ -268,16 +387,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) return i2c_smbus_write_word_data(client, reg, swab16(value)); } -static void lm75_init_client(struct i2c_client *client) -{ - int reg; - - /* Enable if in shutdown mode */ - reg = lm75_read_value(client, LM75_REG_CONF); - if (reg >= 0 && (reg & 0x01)) - lm75_write_value(client, LM75_REG_CONF, reg & 0xfe); -} - static struct lm75_data *lm75_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -309,13 +418,28 @@ static struct lm75_data *lm75_update_device(struct device *dev) return data; } +/*-----------------------------------------------------------------------*/ + +/* module glue */ + static int __init sensors_lm75_init(void) { - return i2c_add_driver(&lm75_driver); + int status; + + status = i2c_add_driver(&lm75_driver); + if (status < 0) + return status; + + status = i2c_add_driver(&lm75_legacy_driver); + if (status < 0) + i2c_del_driver(&lm75_driver); + + return status; } static void __exit sensors_lm75_exit(void) { + i2c_del_driver(&lm75_legacy_driver); i2c_del_driver(&lm75_driver); } diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index ee5eca1c1921..12d446f54f97 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1,7 +1,7 @@ /* lm85.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> @@ -51,24 +51,17 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) /* Fan speeds are LSB, MSB (2 bytes) */ -#define LM85_REG_FAN(nr) (0x28 + (nr) *2) -#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) +#define LM85_REG_FAN(nr) (0x28 + (nr) * 2) +#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2) #define LM85_REG_PWM(nr) (0x30 + (nr)) -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f /* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 -#define LM85_COMPANY_SMSC 0x5c +#define LM85_COMPANY_SMSC 0x5c #define LM85_VERSTEP_VMASK 0xf0 #define LM85_VERSTEP_GENERIC 0x60 #define LM85_VERSTEP_LM85C 0x60 @@ -91,58 +84,45 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) #define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) #define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 #define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) #define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) #define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) #define LM85_REG_AFAN_HYST1 0x6d #define LM85_REG_AFAN_HYST2 0x6e -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 #define ADM1027_REG_EXTEND_ADC1 0x76 #define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A #define EMC6D100_REG_ALARM3 0x7d /* IN5, IN6 and IN7 */ -#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) -#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) -#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) +#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5)) +#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2) +#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2) #define EMC6D102_REG_EXTEND_ADC1 0x85 #define EMC6D102_REG_EXTEND_ADC2 0x86 #define EMC6D102_REG_EXTEND_ADC3 0x87 #define EMC6D102_REG_EXTEND_ADC4 0x88 -/* Conversions. Rounding and limit checking is only done on the TO_REG +/* Conversions. Rounding and limit checking is only done on the TO_REG variants. Note that you should be a bit careful with which arguments these macros are called: arguments may be evaluated more than once. */ /* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ - 2500, 2250, 3300, 5000, 12000, - 3300, 1500, 1800 /*EMC6D100*/ - }; -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) +static const int lm85_scaling[] = { /* .001 Volts */ + 2500, 2250, 3300, 5000, 12000, + 3300, 1500, 1800 /*EMC6D100*/ +}; +#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) -#define INS_TO_REG(n,val) \ - SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) +#define INS_TO_REG(n, val) \ + SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255) -#define INSEXT_FROM_REG(n,val,ext) \ +#define INSEXT_FROM_REG(n, val, ext) \ SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n]) -#define INS_FROM_REG(n,val) SCALE((val), 192, lm85_scaling[n]) +#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n]) /* FAN speed is measured using 90kHz clock */ static inline u16 FAN_TO_REG(unsigned long val) @@ -151,16 +131,17 @@ static inline u16 FAN_TO_REG(unsigned long val) return 0xffff; return SENSORS_LIMIT(5400000 / val, 1, 0xfffe); } -#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) +#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \ + 5400000 / (val)) /* Temperature is reported in .001 degC increments */ #define TEMP_TO_REG(val) \ - SENSORS_LIMIT(SCALE(val,1000,1),-127,127) -#define TEMPEXT_FROM_REG(val,ext) \ + SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127) +#define TEMPEXT_FROM_REG(val, ext) \ SCALE(((val) << 4) + (ext), 16, 1000) #define TEMP_FROM_REG(val) ((val) * 1000) -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) +#define PWM_TO_REG(val) SENSORS_LIMIT(val, 0, 255) #define PWM_FROM_REG(val) (val) @@ -183,17 +164,17 @@ static inline u16 FAN_TO_REG(unsigned long val) */ /* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { - 2000, 2500, 3300, 4000, 5000, 6600, - 8000, 10000, 13300, 16000, 20000, 26600, - 32000, 40000, 53300, 80000 - }; -static int RANGE_TO_REG( int range ) +static const int lm85_range_map[] = { + 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, + 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 +}; + +static int RANGE_TO_REG(int range) { int i; if (range >= lm85_range_map[15]) - return 15 ; + return 15; /* Find the closest match */ for (i = 14; i >= 0; --i) { @@ -207,28 +188,25 @@ static int RANGE_TO_REG( int range ) return 0; } -#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) +#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ /* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 - }; -static int FREQ_TO_REG( int freq ) +static const int lm85_freq_map[] = { /* .1 Hz */ + 100, 150, 230, 300, 380, 470, 620, 940 +}; + +static int FREQ_TO_REG(int freq) { int i; - if( freq >= lm85_freq_map[7] ) { return 7 ; } - for( i = 0 ; i < 7 ; ++i ) - if( freq <= lm85_freq_map[i] ) - break ; - return( i & 0x07 ); + if (freq >= lm85_freq_map[7]) + return 7; + for (i = 0; i < 7; ++i) + if (freq <= lm85_freq_map[i]) + break; + return i; } -#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) +#define FREQ_FROM_REG(val) lm85_freq_map[(val) & 0x07] /* Since we can't use strings, I'm abusing these numbers * to stand in for the following meanings: @@ -242,30 +220,23 @@ static int FREQ_TO_REG( int freq ) * -2 -- PWM responds to manual control */ -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) +static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5] -static int ZONE_TO_REG( int zone ) +static int ZONE_TO_REG(int zone) { int i; - for( i = 0 ; i <= 7 ; ++i ) - if( zone == lm85_zone_map[i] ) - break ; - if( i > 7 ) /* Not found. */ + for (i = 0; i <= 7; ++i) + if (zone == lm85_zone_map[i]) + break; + if (i > 7) /* Not found. */ i = 3; /* Always 100% */ - return( (i & 0x07)<<5 ); + return i << 5; } -#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) -#define HYST_FROM_REG(val) ((val)*1000) - -#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) -#define OFFSET_FROM_REG(val) ((val)*25) - -#define PPR_MASK(fan) (0x03<<(fan *2)) -#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) -#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) +#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) +#define HYST_FROM_REG(val) ((val) * 1000) /* Chip sampling rates * @@ -292,11 +263,11 @@ struct lm85_zone { u8 hyst; /* Low limit hysteresis. (0-15) */ u8 range; /* Temp range, encoded */ s8 critical; /* "All fans ON" temp limit */ - u8 off_desired; /* Actual "off" temperature specified. Preserved + u8 off_desired; /* Actual "off" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ - u8 max_desired; /* Actual "max" temperature specified. Preserved + u8 max_desired; /* Actual "max" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ @@ -327,23 +298,13 @@ struct lm85_data { s8 temp[3]; /* Register value */ s8 temp_min[3]; /* Register value */ s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ u8 vid; /* Register value */ u8 vrm; /* VRM version */ - u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ u32 alarms; /* Register encoding, combined */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; @@ -355,9 +316,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, static int lm85_detach_client(struct i2c_client *client); static int lm85_read_value(struct i2c_client *client, u8 reg); -static int lm85_write_value(struct i2c_client *client, u8 reg, int value); +static void lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); -static void lm85_init_client(struct i2c_client *client); static struct i2c_driver lm85_driver = { @@ -375,7 +335,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr])); } static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, @@ -383,7 +343,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr])); } static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, @@ -414,7 +374,8 @@ show_fan_offset(4); /* vid, vrm, alarms */ -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = lm85_update_device(dev); int vid; @@ -432,13 +393,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = dev_get_drvdata(dev); return sprintf(buf, "%ld\n", (long) data->vrm); } -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct lm85_data *data = dev_get_drvdata(dev); data->vrm = simple_strtoul(buf, NULL, 10); @@ -447,7 +410,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms_reg(struct device *dev, struct device_attribute + *attr, char *buf) { struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%u\n", data->alarms); @@ -488,7 +452,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); } static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -581,17 +545,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, - data->in[nr], - data->in_ext[nr])); + return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr], + data->in_ext[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, +static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); } static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, @@ -614,7 +577,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); } static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, @@ -656,8 +619,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], - data->temp_ext[nr])); + return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr], + data->temp_ext[nr])); } static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, @@ -665,7 +628,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, @@ -688,7 +651,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, @@ -697,7 +660,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); @@ -726,7 +689,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); + return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config)); } static ssize_t set_pwm_auto_channels(struct device *dev, @@ -735,11 +698,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) - | ZONE_TO_REG(val) ; + | ZONE_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), data->autofan[nr].config); mutex_unlock(&data->update_lock); @@ -751,7 +714,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); } static ssize_t set_pwm_auto_pwm_min(struct device *dev, @@ -775,7 +738,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", data->autofan[nr].min_off); + return sprintf(buf, "%d\n", data->autofan[nr].min_off); } static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, @@ -785,15 +748,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + u8 tmp; mutex_lock(&data->update_lock); data->autofan[nr].min_off = val; - lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] - | data->syncpwm3 - | (data->autofan[0].min_off ? 0x20 : 0) - | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0) - ); + tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + tmp &= ~(0x20 << nr); + if (data->autofan[nr].min_off) + tmp |= 0x20 << nr; + lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp); mutex_unlock(&data->update_lock); return count; } @@ -803,7 +766,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); + return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); } static ssize_t set_pwm_auto_pwm_freq(struct device *dev, @@ -818,8 +781,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev, data->autofan[nr].freq = FREQ_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), (data->zone[nr].range << 4) - | data->autofan[nr].freq - ); + | data->autofan[nr].freq); mutex_unlock(&data->update_lock); return count; } @@ -849,7 +811,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) - HYST_FROM_REG(data->zone[nr].hyst)); } @@ -866,15 +828,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, min = TEMP_FROM_REG(data->zone[nr].limit); data->zone[nr].off_desired = TEMP_TO_REG(val); data->zone[nr].hyst = HYST_TO_REG(min - val); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -885,7 +845,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit)); } static ssize_t set_temp_auto_temp_min(struct device *dev, @@ -913,15 +873,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( data->zone[nr].limit) - TEMP_FROM_REG( data->zone[nr].off_desired)); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -932,7 +890,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) + RANGE_FROM_REG(data->zone[nr].range)); } @@ -962,11 +920,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical)); } static ssize_t set_temp_auto_temp_crit(struct device *dev, - struct device_attribute *attr,const char *buf, size_t count) + struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); @@ -1127,20 +1085,37 @@ static const struct attribute_group lm85_group_in567 = { .attrs = lm85_attributes_in567, }; +static void lm85_init_client(struct i2c_client *client) +{ + int value; + + /* Start monitoring if needed */ + value = lm85_read_value(client, LM85_REG_CONFIG); + if (!(value & 0x01)) { + dev_info(&client->dev, "Starting monitoring\n"); + lm85_write_value(client, LM85_REG_CONFIG, value | 0x01); + } + + /* Warn about unusual configuration bits */ + if (value & 0x02) + dev_warn(&client->dev, "Device configuration is locked\n"); + if (!(value & 0x04)) + dev_warn(&client->dev, "Device is not ready\n"); +} + static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { - int company, verstep ; - struct i2c_client *new_client = NULL; + int company, verstep; + struct i2c_client *client; struct lm85_data *data; int err = 0; - const char *type_name = ""; + const char *type_name; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ - goto ERROR0 ; - }; + goto ERROR0; + } /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. @@ -1151,138 +1126,145 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR0; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &lm85_driver; /* Now, we do the remaining detection. */ - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, + i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ if (kind <= 0) { dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", - i2c_adapter_id(adapter), address ); - if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85C ) { - kind = lm85c ; - } else if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85B ) { - kind = lm85b ; - } else if( company == LM85_COMPANY_NATIONAL - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + i2c_adapter_id(adapter), address); + if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85C) { + kind = lm85c; + } else if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85B) { + kind = lm85b; + } else if (company == LM85_COMPANY_NATIONAL + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" " Defaulting to LM85.\n", verstep); - kind = any_chip ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && verstep == LM85_VERSTEP_ADM1027 ) { - kind = adm1027 ; - } else if( company == LM85_COMPANY_ANALOG_DEV + kind = any_chip; + } else if (company == LM85_COMPANY_ANALOG_DEV + && verstep == LM85_VERSTEP_ADM1027) { + kind = adm1027; + } else if (company == LM85_COMPANY_ANALOG_DEV && (verstep == LM85_VERSTEP_ADT7463 - || verstep == LM85_VERSTEP_ADT7463C) ) { - kind = adt7463 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + || verstep == LM85_VERSTEP_ADT7463C)) { + kind = adt7463; + } else if (company == LM85_COMPANY_ANALOG_DEV + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( company == LM85_COMPANY_SMSC + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (company == LM85_COMPANY_SMSC && (verstep == LM85_VERSTEP_EMC6D100_A0 - || verstep == LM85_VERSTEP_EMC6D100_A1) ) { + || verstep == LM85_VERSTEP_EMC6D100_A1)) { /* Unfortunately, we can't tell a '100 from a '101 * from the registers. Since a '101 is a '100 * in a package with fewer pins and therefore no * 3.3V, 1.5V or 1.8V inputs, perhaps if those * inputs read 0, then it's a '101. */ - kind = emc6d100 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d100; + } else if (company == LM85_COMPANY_SMSC && verstep == LM85_VERSTEP_EMC6D102) { - kind = emc6d102 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d102; + } else if (company == LM85_COMPANY_SMSC && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( kind == any_chip + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (kind == any_chip && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); /* Leave kind as "any_chip" */ } else { dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an LM85 ... */ - if( kind == any_chip ) { /* User used force=x,y */ + /* Not an LM85... */ + if (kind == any_chip) { /* User used force=x,y */ dev_err(&adapter->dev, "Generic LM85 Version 6 not" " found at %d,0x%02x. Try force_lm85c.\n", - i2c_adapter_id(adapter), address ); + i2c_adapter_id(adapter), address); } - err = 0 ; + err = 0; goto ERROR1; } } /* Fill in the chip specific driver values */ - if ( kind == any_chip ) { - type_name = "lm85"; - } else if ( kind == lm85b ) { + switch (kind) { + case lm85b: type_name = "lm85b"; - } else if ( kind == lm85c ) { + break; + case lm85c: type_name = "lm85c"; - } else if ( kind == adm1027 ) { + break; + case adm1027: type_name = "adm1027"; - } else if ( kind == adt7463 ) { + break; + case adt7463: type_name = "adt7463"; - } else if ( kind == emc6d100){ + break; + case emc6d100: type_name = "emc6d100"; - } else if ( kind == emc6d102 ) { + break; + case emc6d102: type_name = "emc6d102"; + break; + default: + type_name = "lm85"; } - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + strlcpy(client->name, type_name, I2C_NAME_SIZE); /* Fill in the remaining client fields */ data->type = kind; - data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(client); + if (err) goto ERROR1; /* Set the VRM version */ data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ - lm85_init_client(new_client); + lm85_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group))) + err = sysfs_create_group(&client->dev.kobj, &lm85_group); + if (err) goto ERROR2; /* The ADT7463 has an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ - data->vid = lm85_read_value(new_client, LM85_REG_VID); + data->vid = lm85_read_value(client, LM85_REG_VID); if (!(kind == adt7463 && (data->vid & 0x80))) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto ERROR3; /* The EMC6D100 has 3 additional voltage inputs */ if (kind == emc6d100) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567))) goto ERROR3; - data->hwmon_dev = hwmon_device_register(&new_client->dev); + data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto ERROR3; @@ -1291,16 +1273,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, return 0; /* Error out and cleanup code */ - ERROR3: - sysfs_remove_group(&new_client->dev.kobj, &lm85_group); - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4); + ERROR3: + sysfs_remove_group(&client->dev.kobj, &lm85_group); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in4); if (kind == emc6d100) - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567); - ERROR2: - i2c_detach_client(new_client); - ERROR1: + sysfs_remove_group(&client->dev.kobj, &lm85_group_in567); + ERROR2: + i2c_detach_client(client); + ERROR1: kfree(data); - ERROR0: + ERROR0: return err; } @@ -1323,100 +1305,46 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) int res; /* What size location is it? */ - switch( reg ) { - case LM85_REG_FAN(0) : /* Read WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - case LM85_REG_ALARM1 : /* Read both bytes at once */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff ; - res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8 ; - res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; - break ; + switch (reg) { + case LM85_REG_FAN(0): /* Read WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): + case LM85_REG_ALARM1: /* Read both bytes at once */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff; + res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; + break; default: /* Read BYTE data */ res = i2c_smbus_read_byte_data(client, reg); - break ; + break; } - return res ; + return res; } -static int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static void lm85_write_value(struct i2c_client *client, u8 reg, int value) { - int res ; - - switch( reg ) { - case LM85_REG_FAN(0) : /* Write WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : + switch (reg) { + case LM85_REG_FAN(0): /* Write WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; - res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; - break ; + i2c_smbus_write_byte_data(client, reg, value & 0xff); + i2c_smbus_write_byte_data(client, reg + 1, value >> 8); + break; default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); - break ; + i2c_smbus_write_byte_data(client, reg, value); + break; } - - return res ; -} - -static void lm85_init_client(struct i2c_client *client) -{ - int value; - struct lm85_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - - /* Warn if part was not "READY" */ - value = lm85_read_value(client, LM85_REG_CONFIG); - dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if( value & 0x02 ) { - dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( ! (value & 0x04) ) { - dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( value & 0x10 - && ( data->type == adm1027 - || data->type == adt7463 ) ) { - dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " - "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. - */ - - /* Start monitoring */ - value = lm85_read_value(client, LM85_REG_CONFIG); - /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~ 0x02) | 0x01 ; - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - lm85_write_value(client, LM85_REG_CONFIG, value); } static struct lm85_data *lm85_update_device(struct device *dev) @@ -1427,28 +1355,30 @@ static struct lm85_data *lm85_update_device(struct device *dev) mutex_lock(&data->update_lock); - if ( !data->valid || - time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) { /* Things that change quickly */ dev_dbg(&client->dev, "Reading sensor values\n"); - + /* Have to read extended bits first to "freeze" the * more significant bits that are read later. * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if ( (data->type == adm1027) || (data->type == adt7463) ) { + if (data->type == adm1027 || data->type == adt7463) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC2); int val = (ext1 << 8) + ext2; - for(i = 0; i <= 4; i++) - data->in_ext[i] = ((val>>(i * 2))&0x03) << 2; + for (i = 0; i <= 4; i++) + data->in_ext[i] = + ((val >> (i * 2)) & 0x03) << 2; - for(i = 0; i <= 2; i++) - data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c; + for (i = 0; i <= 2; i++) + data->temp_ext[i] = + (val >> ((i + 4) * 2)) & 0x0c; } data->vid = lm85_read_value(client, LM85_REG_VID); @@ -1456,6 +1386,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) for (i = 0; i <= 3; ++i) { data->in[i] = lm85_read_value(client, LM85_REG_IN(i)); + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1463,38 +1395,25 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN(4)); } - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - if ( data->type == adt7463 ) { - if( data->therm_total < ULONG_MAX - 256 ) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM ); - } - } else if ( data->type == emc6d100 ) { + if (data->type == emc6d100) { /* Three more voltage sensors */ for (i = 5; i <= 7; ++i) { - data->in[i] = - lm85_read_value(client, EMC6D100_REG_IN(i)); + data->in[i] = lm85_read_value(client, + EMC6D100_REG_IN(i)); } /* More alarm bits */ - data->alarms |= - lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102 ) { + data->alarms |= lm85_read_value(client, + EMC6D100_REG_ALARM3) << 16; + } else if (data->type == emc6d102) { /* Have to read LSB bits after the MSB ones because the reading of the MSB bits has frozen the LSBs (backward from the ADM1027). @@ -1509,20 +1428,20 @@ static struct lm85_data *lm85_update_device(struct device *dev) EMC6D102_REG_EXTEND_ADC4); data->in_ext[0] = ext3 & 0x0f; data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; + data->in_ext[2] = ext4 >> 4; + data->in_ext[3] = ext3 >> 4; + data->in_ext[4] = ext2 >> 4; data->temp_ext[0] = ext1 & 0x0f; data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; + data->temp_ext[2] = ext1 >> 4; } - data->last_reading = jiffies ; - }; /* last_reading */ + data->last_reading = jiffies; + } /* last_reading */ - if ( !data->valid || - time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) { /* Things that don't change often */ dev_dbg(&client->dev, "Reading config values\n"); @@ -1531,6 +1450,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_IN_MIN(i)); data->in_max[i] = lm85_read_value(client, LM85_REG_IN_MAX(i)); + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1540,34 +1461,28 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN_MAX(4)); } - if ( data->type == emc6d100 ) { + if (data->type == emc6d100) { for (i = 5; i <= 7; ++i) { - data->in_min[i] = - lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); + data->in_min[i] = lm85_read_value(client, + EMC6D100_REG_IN_MIN(i)); + data->in_max[i] = lm85_read_value(client, + EMC6D100_REG_IN_MAX(i)); } } - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - for (i = 0; i <= 2; ++i) { + int val; + data->temp_min[i] = lm85_read_value(client, LM85_REG_TEMP_MIN(i)); data->temp_max[i] = lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - for (i = 0; i <= 2; ++i) { - int val ; data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07 ; - data->zone[i].range = (val >> 4) & 0x0f ; + data->autofan[i].freq = val & 0x07; + data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); data->zone[i].limit = @@ -1577,50 +1492,19 @@ static struct lm85_data *lm85_update_device(struct device *dev) } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f ; - data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ - data->autofan[0].min_off = (i & 0x20) != 0 ; - data->autofan[1].min_off = (i & 0x40) != 0 ; - data->autofan[2].min_off = (i & 0x80) != 0 ; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i>>4) & 0x0f ; - data->smooth[2] = i & 0x0f ; + data->autofan[0].min_off = (i & 0x20) != 0; + data->autofan[1].min_off = (i & 0x40) != 0; + data->autofan[2].min_off = (i & 0x80) != 0; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i>>4) & 0x0f ; - data->zone[1].hyst = i & 0x0f ; + data->zone[0].hyst = i >> 4; + data->zone[1].hyst = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i>>4) & 0x0f ; - - if ( (data->type == lm85b) || (data->type == lm85c) ) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE ); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL ); - } else if ( (data->type == adt7463) || (data->type == adm1027) ) { - if ( data->type == adt7463 ) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i) ); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1 ); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT ); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i) ); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3 ); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR ); - } - + data->zone[2].hyst = i >> 4; + data->last_config = jiffies; - }; /* last_config */ + } /* last_config */ data->valid = 1; @@ -1635,17 +1519,15 @@ static int __init sm_lm85_init(void) return i2c_add_driver(&lm85_driver); } -static void __exit sm_lm85_exit(void) +static void __exit sm_lm85_exit(void) { i2c_del_driver(&lm85_driver); } -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with - * post 2.7.0 CVS changes. - */ MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com"); +MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, " + "Margit Schubert-While <margitsw@t-online.de>, " + "Justin Thiessen <jthiessen@penguincomputing.com>"); MODULE_DESCRIPTION("LM85-B, LM85-C driver"); module_init(sm_lm85_init); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index c521bf6e1bf2..fa2be26272d5 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) /* Make sure we have sane timings */ sanitize_timings(pmif); + host = ide_host_alloc(&d, hws); + if (host == NULL) + return -ENOMEM; + hwif = host->ports[0]; + #ifndef CONFIG_PPC64 /* XXX FIXME: Media bay stuff need re-organizing */ if (np->parent && np->parent->name @@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hw->irq); - rc = ide_host_add(&d, hws, &host); - if (rc) + rc = ide_host_register(host, &d, hws); + if (rc) { + ide_host_free(host); return rc; - - hwif = host->ports[0]; + } return 0; } diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 2b404284c28a..7797ef6e5e64 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -27,7 +27,6 @@ #include <linux/init.h> #include <linux/timer.h> #include <linux/maple.h> -#include <asm/mach/maple.h> /* Very simple mutex to ensure proper cleanup */ static DEFINE_MUTEX(maple_keyb_mutex); diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index e30a7773f93c..fbce5222d83c 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag, #ifdef CONFIG_GIGASET_DEBUG unsigned char c; static char dbgline[3 * 32 + 1]; - static const char hexdigit[] = "0123456789abcdef"; int i = 0; while (count-- > 0) { if (i > sizeof(dbgline) - 4) { @@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag, c = *bytes++; dbgline[i] = (i && !(i % 12)) ? '-' : ' '; i++; - dbgline[i++] = hexdigit[(c >> 4) & 0x0f]; - dbgline[i++] = hexdigit[c & 0x0f]; + dbgline[i++] = hex_asc_hi(c); + dbgline[i++] = hex_asc_lo(c); } dbgline[i] = '\0'; gig_dbg(level, "%s:%s", tag, dbgline); diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h index a368d6caca0e..3a72b908900f 100644 --- a/drivers/isdn/hysdn/hysdn_pof.h +++ b/drivers/isdn/hysdn/hysdn_pof.h @@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag { /* Pof record header */ typedef struct PofTimeStamp_tag { /*00 */ unsigned long UnixTime __attribute__((packed)); - /*04 */ unsigned char DateTimeText[0x28] __attribute__((packed)); + /*04 */ unsigned char DateTimeText[0x28]; /* =40 */ /*2C */ } tPofTimeStamp; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 798e468103b8..61f441409234 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t) */ static int lookup_device(const char *path, dev_t *dev) { - int r; - struct nameidata nd; - struct inode *inode; - - if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd))) - return r; - - inode = nd.path.dentry->d_inode; - if (!inode) { - r = -ENOENT; - goto out; - } - - if (!S_ISBLK(inode->i_mode)) { - r = -ENOTBLK; - goto out; - } - - *dev = inode->i_rdev; - - out: - path_put(&nd.path); - return r; + struct block_device *bdev = lookup_bdev(path); + if (IS_ERR(bdev)) + return PTR_ERR(bdev); + *dev = bdev->bd_dev; + bdput(bdev); + return 0; } /* diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index f5ade1904aad..fa50e9ede0e6 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -426,7 +426,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" - depends on IA64_GENERIC || IA64_SGI_SN2 + depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 ---help--- @@ -450,4 +450,27 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config SGI_GRU + tristate "SGI GRU driver" + depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP + default n + select MMU_NOTIFIER + ---help--- + The GRU is a hardware resource located in the system chipset. The GRU + contains memory that can be mmapped into the user address space. This memory is + used to communicate with the GRU to perform functions such as load/store, + scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user + instructions using user virtual addresses. GRU instructions (ex., bcopy) use + user virtual addresses for operands. + + If you are not running on a SGI UV system, say N. + +config SGI_GRU_DEBUG + bool "SGI GRU driver debug" + depends on SGI_GRU + default n + ---help--- + This option enables addition debugging code for the SGI GRU driver. If + you are unsure, say N. + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index f5e273420c09..c6c13f60b452 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -28,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ +obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile new file mode 100644 index 000000000000..d03597a521b0 --- /dev/null +++ b/drivers/misc/sgi-gru/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_SGI_GRU) := gru.o +gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o + diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h new file mode 100644 index 000000000000..40df7cb3f0a5 --- /dev/null +++ b/drivers/misc/sgi-gru/gru.h @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRU_H__ +#define __GRU_H__ + +/* + * GRU architectural definitions + */ +#define GRU_CACHE_LINE_BYTES 64 +#define GRU_HANDLE_STRIDE 256 +#define GRU_CB_BASE 0 +#define GRU_DS_BASE 0x20000 + +/* + * Size used to map GRU GSeg + */ +#if defined CONFIG_IA64 +#define GRU_GSEG_PAGESIZE (256 * 1024UL) +#elif defined CONFIG_X86_64 +#define GRU_GSEG_PAGESIZE (256 * 1024UL) /* ZZZ 2MB ??? */ +#else +#error "Unsupported architecture" +#endif + +/* + * Structure for obtaining GRU resource information + */ +struct gru_chiplet_info { + int node; + int chiplet; + int blade; + int total_dsr_bytes; + int total_cbr; + int total_user_dsr_bytes; + int total_user_cbr; + int free_user_dsr_bytes; + int free_user_cbr; +}; + +/* Flags for GRU options on the gru_create_context() call */ +/* Select one of the follow 4 options to specify how TLB misses are handled */ +#define GRU_OPT_MISS_DEFAULT 0x0000 /* Use default mode */ +#define GRU_OPT_MISS_USER_POLL 0x0001 /* User will poll CB for faults */ +#define GRU_OPT_MISS_FMM_INTR 0x0002 /* Send interrupt to cpu to + handle fault */ +#define GRU_OPT_MISS_FMM_POLL 0x0003 /* Use system polling thread */ +#define GRU_OPT_MISS_MASK 0x0003 /* Mask for TLB MISS option */ + + + +#endif /* __GRU_H__ */ diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h new file mode 100644 index 000000000000..0dc36225c7c6 --- /dev/null +++ b/drivers/misc/sgi-gru/gru_instructions.h @@ -0,0 +1,669 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRU_INSTRUCTIONS_H__ +#define __GRU_INSTRUCTIONS_H__ + +#define gru_flush_cache_hook(p) +#define gru_emulator_wait_hook(p, w) + +/* + * Architecture dependent functions + */ + +#if defined CONFIG_IA64 +#include <linux/compiler.h> +#include <asm/intrinsics.h> +#define __flush_cache(p) ia64_fc(p) +/* Use volatile on IA64 to ensure ordering via st4.rel */ +#define gru_ordered_store_int(p,v) \ + do { \ + barrier(); \ + *((volatile int *)(p)) = v; /* force st.rel */ \ + } while (0) +#elif defined CONFIG_X86_64 +#define __flush_cache(p) clflush(p) +#define gru_ordered_store_int(p,v) \ + do { \ + barrier(); \ + *(int *)p = v; \ + } while (0) +#else +#error "Unsupported architecture" +#endif + +/* + * Control block status and exception codes + */ +#define CBS_IDLE 0 +#define CBS_EXCEPTION 1 +#define CBS_ACTIVE 2 +#define CBS_CALL_OS 3 + +/* CB substatus bitmasks */ +#define CBSS_MSG_QUEUE_MASK 7 +#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK 8 + +/* CB substatus message queue values (low 3 bits of substatus) */ +#define CBSS_NO_ERROR 0 +#define CBSS_LB_OVERFLOWED 1 +#define CBSS_QLIMIT_REACHED 2 +#define CBSS_PAGE_OVERFLOW 3 +#define CBSS_AMO_NACKED 4 +#define CBSS_PUT_NACKED 5 + +/* + * Structure used to fetch exception detail for CBs that terminate with + * CBS_EXCEPTION + */ +struct control_block_extended_exc_detail { + unsigned long cb; + int opc; + int ecause; + int exopc; + long exceptdet0; + int exceptdet1; +}; + +/* + * Instruction formats + */ + +/* + * Generic instruction format. + * This definition has precise bit field definitions. + */ +struct gru_instruction_bits { + /* DW 0 - low */ + unsigned int icmd: 1; + unsigned char ima: 3; /* CB_DelRep, unmapped mode */ + unsigned char reserved0: 4; + unsigned int xtype: 3; + unsigned int iaa0: 2; + unsigned int iaa1: 2; + unsigned char reserved1: 1; + unsigned char opc: 8; /* opcode */ + unsigned char exopc: 8; /* extended opcode */ + /* DW 0 - high */ + unsigned int idef2: 22; /* TRi0 */ + unsigned char reserved2: 2; + unsigned char istatus: 2; + unsigned char isubstatus:4; + unsigned char reserved3: 2; + /* DW 1 */ + unsigned long idef4; /* 42 bits: TRi1, BufSize */ + /* DW 2-6 */ + unsigned long idef1; /* BAddr0 */ + unsigned long idef5; /* Nelem */ + unsigned long idef6; /* Stride, Operand1 */ + unsigned long idef3; /* BAddr1, Value, Operand2 */ + unsigned long reserved4; + /* DW 7 */ + unsigned long avalue; /* AValue */ +}; + +/* + * Generic instruction with friendlier names. This format is used + * for inline instructions. + */ +struct gru_instruction { + /* DW 0 */ + unsigned int op32; /* icmd,xtype,iaa0,ima,opc */ + unsigned int tri0; + unsigned long tri1_bufsize; /* DW 1 */ + unsigned long baddr0; /* DW 2 */ + unsigned long nelem; /* DW 3 */ + unsigned long op1_stride; /* DW 4 */ + unsigned long op2_value_baddr1; /* DW 5 */ + unsigned long reserved0; /* DW 6 */ + unsigned long avalue; /* DW 7 */ +}; + +/* Some shifts and masks for the low 32 bits of a GRU command */ +#define GRU_CB_ICMD_SHFT 0 +#define GRU_CB_ICMD_MASK 0x1 +#define GRU_CB_XTYPE_SHFT 8 +#define GRU_CB_XTYPE_MASK 0x7 +#define GRU_CB_IAA0_SHFT 11 +#define GRU_CB_IAA0_MASK 0x3 +#define GRU_CB_IAA1_SHFT 13 +#define GRU_CB_IAA1_MASK 0x3 +#define GRU_CB_IMA_SHFT 1 +#define GRU_CB_IMA_MASK 0x3 +#define GRU_CB_OPC_SHFT 16 +#define GRU_CB_OPC_MASK 0xff +#define GRU_CB_EXOPC_SHFT 24 +#define GRU_CB_EXOPC_MASK 0xff + +/* GRU instruction opcodes (opc field) */ +#define OP_NOP 0x00 +#define OP_BCOPY 0x01 +#define OP_VLOAD 0x02 +#define OP_IVLOAD 0x03 +#define OP_VSTORE 0x04 +#define OP_IVSTORE 0x05 +#define OP_VSET 0x06 +#define OP_IVSET 0x07 +#define OP_MESQ 0x08 +#define OP_GAMXR 0x09 +#define OP_GAMIR 0x0a +#define OP_GAMIRR 0x0b +#define OP_GAMER 0x0c +#define OP_GAMERR 0x0d +#define OP_BSTORE 0x0e +#define OP_VFLUSH 0x0f + + +/* Extended opcodes values (exopc field) */ + +/* GAMIR - AMOs with implicit operands */ +#define EOP_IR_FETCH 0x01 /* Plain fetch of memory */ +#define EOP_IR_CLR 0x02 /* Fetch and clear */ +#define EOP_IR_INC 0x05 /* Fetch and increment */ +#define EOP_IR_DEC 0x07 /* Fetch and decrement */ +#define EOP_IR_QCHK1 0x0d /* Queue check, 64 byte msg */ +#define EOP_IR_QCHK2 0x0e /* Queue check, 128 byte msg */ + +/* GAMIRR - Registered AMOs with implicit operands */ +#define EOP_IRR_FETCH 0x01 /* Registered fetch of memory */ +#define EOP_IRR_CLR 0x02 /* Registered fetch and clear */ +#define EOP_IRR_INC 0x05 /* Registered fetch and increment */ +#define EOP_IRR_DEC 0x07 /* Registered fetch and decrement */ +#define EOP_IRR_DECZ 0x0f /* Registered fetch and decrement, update on zero*/ + +/* GAMER - AMOs with explicit operands */ +#define EOP_ER_SWAP 0x00 /* Exchange argument and memory */ +#define EOP_ER_OR 0x01 /* Logical OR with memory */ +#define EOP_ER_AND 0x02 /* Logical AND with memory */ +#define EOP_ER_XOR 0x03 /* Logical XOR with memory */ +#define EOP_ER_ADD 0x04 /* Add value to memory */ +#define EOP_ER_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/ +#define EOP_ER_CADD 0x0c /* Queue check, operand1*64 byte msg */ + +/* GAMERR - Registered AMOs with explicit operands */ +#define EOP_ERR_SWAP 0x00 /* Exchange argument and memory */ +#define EOP_ERR_OR 0x01 /* Logical OR with memory */ +#define EOP_ERR_AND 0x02 /* Logical AND with memory */ +#define EOP_ERR_XOR 0x03 /* Logical XOR with memory */ +#define EOP_ERR_ADD 0x04 /* Add value to memory */ +#define EOP_ERR_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/ +#define EOP_ERR_EPOLL 0x09 /* Poll for equality */ +#define EOP_ERR_NPOLL 0x0a /* Poll for inequality */ + +/* GAMXR - SGI Arithmetic unit */ +#define EOP_XR_CSWAP 0x0b /* Masked compare exchange */ + + +/* Transfer types (xtype field) */ +#define XTYPE_B 0x0 /* byte */ +#define XTYPE_S 0x1 /* short (2-byte) */ +#define XTYPE_W 0x2 /* word (4-byte) */ +#define XTYPE_DW 0x3 /* doubleword (8-byte) */ +#define XTYPE_CL 0x6 /* cacheline (64-byte) */ + + +/* Instruction access attributes (iaa0, iaa1 fields) */ +#define IAA_RAM 0x0 /* normal cached RAM access */ +#define IAA_NCRAM 0x2 /* noncoherent RAM access */ +#define IAA_MMIO 0x1 /* noncoherent memory-mapped I/O space */ +#define IAA_REGISTER 0x3 /* memory-mapped registers, etc. */ + + +/* Instruction mode attributes (ima field) */ +#define IMA_MAPPED 0x0 /* Virtual mode */ +#define IMA_CB_DELAY 0x1 /* hold read responses until status changes */ +#define IMA_UNMAPPED 0x2 /* bypass the TLBs (OS only) */ +#define IMA_INTERRUPT 0x4 /* Interrupt when instruction completes */ + +/* CBE ecause bits */ +#define CBE_CAUSE_RI (1 << 0) +#define CBE_CAUSE_INVALID_INSTRUCTION (1 << 1) +#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN (1 << 2) +#define CBE_CAUSE_PE_CHECK_DATA_ERROR (1 << 3) +#define CBE_CAUSE_IAA_GAA_MISMATCH (1 << 4) +#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION (1 << 5) +#define CBE_CAUSE_OS_FATAL_TLB_FAULT (1 << 6) +#define CBE_CAUSE_EXECUTION_HW_ERROR (1 << 7) +#define CBE_CAUSE_TLBHW_ERROR (1 << 8) +#define CBE_CAUSE_RA_REQUEST_TIMEOUT (1 << 9) +#define CBE_CAUSE_HA_REQUEST_TIMEOUT (1 << 10) +#define CBE_CAUSE_RA_RESPONSE_FATAL (1 << 11) +#define CBE_CAUSE_RA_RESPONSE_NON_FATAL (1 << 12) +#define CBE_CAUSE_HA_RESPONSE_FATAL (1 << 13) +#define CBE_CAUSE_HA_RESPONSE_NON_FATAL (1 << 14) +#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR (1 << 15) +#define CBE_CAUSE_RESPONSE_DATA_ERROR (1 << 16) +#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR (1 << 17) + +/* + * Exceptions are retried for the following cases. If any OTHER bits are set + * in ecause, the exception is not retryable. + */ +#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR | \ + CBE_CAUSE_RA_REQUEST_TIMEOUT | \ + CBE_CAUSE_TLBHW_ERROR | \ + CBE_CAUSE_HA_REQUEST_TIMEOUT) + +/* Message queue head structure */ +union gru_mesqhead { + unsigned long val; + struct { + unsigned int head; + unsigned int limit; + }; +}; + + +/* Generate the low word of a GRU instruction */ +static inline unsigned int +__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype, + unsigned char iaa0, unsigned char iaa1, + unsigned char ima) +{ + return (1 << GRU_CB_ICMD_SHFT) | + (iaa0 << GRU_CB_IAA0_SHFT) | + (iaa1 << GRU_CB_IAA1_SHFT) | + (ima << GRU_CB_IMA_SHFT) | + (xtype << GRU_CB_XTYPE_SHFT) | + (opcode << GRU_CB_OPC_SHFT) | + (exopc << GRU_CB_EXOPC_SHFT); +} + +/* + * Architecture specific intrinsics + */ +static inline void gru_flush_cache(void *p) +{ + __flush_cache(p); +} + +/* + * Store the lower 32 bits of the command including the "start" bit. Then + * start the instruction executing. + */ +static inline void gru_start_instruction(struct gru_instruction *ins, int op32) +{ + gru_ordered_store_int(ins, op32); +} + + +/* Convert "hints" to IMA */ +#define CB_IMA(h) ((h) | IMA_UNMAPPED) + +/* Convert data segment cache line index into TRI0 / TRI1 value */ +#define GRU_DINDEX(i) ((i) * GRU_CACHE_LINE_BYTES) + +/* Inline functions for GRU instructions. + * Note: + * - nelem and stride are in elements + * - tri0/tri1 is in bytes for the beginning of the data segment. + */ +static inline void gru_vload(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (struct gru_instruction *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vstore(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivload(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned int tri1, unsigned char xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivstore(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned int tri1, + unsigned char xtype, unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vset(void *cb, unsigned long mem_addr, + unsigned long value, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op2_value_baddr1 = value; + ins->nelem = nelem; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivset(void *cb, unsigned long mem_addr, + unsigned int tri1, unsigned long value, unsigned char xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op2_value_baddr1 = value; + ins->nelem = nelem; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vflush(void *cb, unsigned long mem_addr, + unsigned long nelem, unsigned char xtype, unsigned long stride, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op1_stride = stride; + ins->nelem = nelem; + gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_nop(void *cb, int hints) +{ + struct gru_instruction *ins = (void *)cb; + + gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints))); +} + + +static inline void gru_bcopy(void *cb, const unsigned long src, + unsigned long dest, + unsigned int tri0, unsigned int xtype, unsigned long nelem, + unsigned int bufsize, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op2_value_baddr1 = (long)dest; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = bufsize; + gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM, + IAA_RAM, CB_IMA(hints))); +} + +static inline void gru_bstore(void *cb, const unsigned long src, + unsigned long dest, unsigned int tri0, unsigned int xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op2_value_baddr1 = (long)dest; + ins->nelem = nelem; + ins->tri0 = tri0; + gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM, + CB_IMA(hints))); +} + +static inline void gru_gamir(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamirr(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamer(void *cb, int exopc, unsigned long src, + unsigned int xtype, + unsigned long operand1, unsigned long operand2, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op1_stride = operand1; + ins->op2_value_baddr1 = operand2; + gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamerr(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long operand1, + unsigned long operand2, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op1_stride = operand1; + ins->op2_value_baddr1 = operand2; + gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamxr(void *cb, unsigned long src, + unsigned int tri0, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->nelem = 4; + gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW, + IAA_RAM, 0, CB_IMA(hints))); +} + +static inline void gru_mesq(void *cb, unsigned long queue, + unsigned long tri0, unsigned long nelem, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)queue; + ins->nelem = nelem; + ins->tri0 = tri0; + gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline unsigned long gru_get_amo_value(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue; +} + +static inline int gru_get_amo_value_head(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue & 0xffffffff; +} + +static inline int gru_get_amo_value_limit(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue >> 32; +} + +static inline union gru_mesqhead gru_mesq_head(int head, int limit) +{ + union gru_mesqhead mqh; + + mqh.head = head; + mqh.limit = limit; + return mqh; +} + +/* + * Get struct control_block_extended_exc_detail for CB. + */ +extern int gru_get_cb_exception_detail(void *cb, + struct control_block_extended_exc_detail *excdet); + +#define GRU_EXC_STR_SIZE 256 + +extern int gru_check_status_proc(void *cb); +extern int gru_wait_proc(void *cb); +extern void gru_wait_abort_proc(void *cb); + +/* + * Control block definition for checking status + */ +struct gru_control_block_status { + unsigned int icmd :1; + unsigned int unused1 :31; + unsigned int unused2 :24; + unsigned int istatus :2; + unsigned int isubstatus :4; + unsigned int inused3 :2; +}; + +/* Get CB status */ +static inline int gru_get_cb_status(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->istatus; +} + +/* Get CB message queue substatus */ +static inline int gru_get_cb_message_queue_substatus(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->isubstatus & CBSS_MSG_QUEUE_MASK; +} + +/* Get CB substatus */ +static inline int gru_get_cb_substatus(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->isubstatus; +} + +/* Check the status of a CB. If the CB is in UPM mode, call the + * OS to handle the UPM status. + * Returns the CB status field value (0 for normal completion) + */ +static inline int gru_check_status(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + int ret = cbs->istatus; + + if (ret == CBS_CALL_OS) + ret = gru_check_status_proc(cb); + return ret; +} + +/* Wait for CB to complete. + * Returns the CB status field value (0 for normal completion) + */ +static inline int gru_wait(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + int ret = cbs->istatus;; + + if (ret != CBS_IDLE) + ret = gru_wait_proc(cb); + return ret; +} + +/* Wait for CB to complete. Aborts program if error. (Note: error does NOT + * mean TLB mis - only fatal errors such as memory parity error or user + * bugs will cause termination. + */ +static inline void gru_wait_abort(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + if (cbs->istatus != CBS_IDLE) + gru_wait_abort_proc(cb); +} + + +/* + * Get a pointer to a control block + * gseg - GSeg address returned from gru_get_thread_gru_segment() + * index - index of desired CB + */ +static inline void *gru_get_cb_pointer(void *gseg, + int index) +{ + return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE; +} + +/* + * Get a pointer to a cacheline in the data segment portion of a GSeg + * gseg - GSeg address returned from gru_get_thread_gru_segment() + * index - index of desired cache line + */ +static inline void *gru_get_data_pointer(void *gseg, int index) +{ + return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES; +} + +/* + * Convert a vaddr into the tri index within the GSEG + * vaddr - virtual address of within gseg + */ +static inline int gru_get_tri(void *vaddr) +{ + return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE; +} +#endif /* __GRU_INSTRUCTIONS_H__ */ diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c new file mode 100644 index 000000000000..3d33015bbf31 --- /dev/null +++ b/drivers/misc/sgi-gru/grufault.c @@ -0,0 +1,633 @@ +/* + * SN Platform GRU Driver + * + * FAULT HANDLER FOR GRU DETECTED TLB MISSES + * + * This file contains code that handles TLB misses within the GRU. + * These misses are reported either via interrupts or user polling of + * the user CB. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <asm/pgtable.h> +#include "gru.h" +#include "grutables.h" +#include "grulib.h" +#include "gru_instructions.h" +#include <asm/uv/uv_hub.h> + +/* + * Test if a physical address is a valid GRU GSEG address + */ +static inline int is_gru_paddr(unsigned long paddr) +{ + return paddr >= gru_start_paddr && paddr < gru_end_paddr; +} + +/* + * Find the vma of a GRU segment. Caller must hold mmap_sem. + */ +struct vm_area_struct *gru_find_vma(unsigned long vaddr) +{ + struct vm_area_struct *vma; + + vma = find_vma(current->mm, vaddr); + if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops) + return vma; + return NULL; +} + +/* + * Find and lock the gts that contains the specified user vaddr. + * + * Returns: + * - *gts with the mmap_sem locked for read and the GTS locked. + * - NULL if vaddr invalid OR is not a valid GSEG vaddr. + */ + +static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + struct gru_thread_state *gts = NULL; + + down_read(&mm->mmap_sem); + vma = gru_find_vma(vaddr); + if (vma) + gts = gru_find_thread_state(vma, TSID(vaddr, vma)); + if (gts) + mutex_lock(>s->ts_ctxlock); + else + up_read(&mm->mmap_sem); + return gts; +} + +static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + struct gru_thread_state *gts = NULL; + + down_write(&mm->mmap_sem); + vma = gru_find_vma(vaddr); + if (vma) + gts = gru_alloc_thread_state(vma, TSID(vaddr, vma)); + if (gts) { + mutex_lock(>s->ts_ctxlock); + downgrade_write(&mm->mmap_sem); + } else { + up_write(&mm->mmap_sem); + } + + return gts; +} + +/* + * Unlock a GTS that was previously locked with gru_find_lock_gts(). + */ +static void gru_unlock_gts(struct gru_thread_state *gts) +{ + mutex_unlock(>s->ts_ctxlock); + up_read(¤t->mm->mmap_sem); +} + +/* + * Set a CB.istatus to active using a user virtual address. This must be done + * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY. + * If the line is evicted, the status may be lost. The in-cache update + * is necessary to prevent the user from seeing a stale cb.istatus that will + * change as soon as the TFH restart is complete. Races may cause an + * occasional failure to clear the cb.istatus, but that is ok. + * + * If the cb address is not valid (should not happen, but...), nothing + * bad will happen.. The get_user()/put_user() will fail but there + * are no bad side-effects. + */ +static void gru_cb_set_istatus_active(unsigned long __user *cb) +{ + union { + struct gru_instruction_bits bits; + unsigned long dw; + } u; + + if (cb) { + get_user(u.dw, cb); + u.bits.istatus = CBS_ACTIVE; + put_user(u.dw, cb); + } +} + +/* + * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the + * interrupt. Interrupts are always sent to a cpu on the blade that contains the + * GRU (except for headless blades which are not currently supported). A blade + * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ + * number uniquely identifies the GRU chiplet on the local blade that caused the + * interrupt. Always called in interrupt context. + */ +static inline struct gru_state *irq_to_gru(int irq) +{ + return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU]; +} + +/* + * Read & clear a TFM + * + * The GRU has an array of fault maps. A map is private to a cpu + * Only one cpu will be accessing a cpu's fault map. + * + * This function scans the cpu-private fault map & clears all bits that + * are set. The function returns a bitmap that indicates the bits that + * were cleared. Note that sense the maps may be updated asynchronously by + * the GRU, atomic operations must be used to clear bits. + */ +static void get_clear_fault_map(struct gru_state *gru, + struct gru_tlb_fault_map *map) +{ + unsigned long i, k; + struct gru_tlb_fault_map *tfm; + + tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id()); + prefetchw(tfm); /* Helps on hardware, required for emulator */ + for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) { + k = tfm->fault_bits[i]; + if (k) + k = xchg(&tfm->fault_bits[i], 0UL); + map->fault_bits[i] = k; + } + + /* + * Not functionally required but helps performance. (Required + * on emulator) + */ + gru_flush_cache(tfm); +} + +/* + * Atomic (interrupt context) & non-atomic (user context) functions to + * convert a vaddr into a physical address. The size of the page + * is returned in pageshift. + * returns: + * 0 - successful + * < 0 - error code + * 1 - (atomic only) try again in non-atomic context + */ +static int non_atomic_pte_lookup(struct vm_area_struct *vma, + unsigned long vaddr, int write, + unsigned long *paddr, int *pageshift) +{ + struct page *page; + + /* ZZZ Need to handle HUGE pages */ + if (is_vm_hugetlb_page(vma)) + return -EFAULT; + *pageshift = PAGE_SHIFT; + if (get_user_pages + (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0) + return -EFAULT; + *paddr = page_to_phys(page); + put_page(page); + return 0; +} + +/* + * + * atomic_pte_lookup + * + * Convert a user virtual address to a physical address + * Only supports Intel large pages (2MB only) on x86_64. + * ZZZ - hugepage support is incomplete + */ +static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, + int write, unsigned long *paddr, int *pageshift) +{ + pgd_t *pgdp; + pmd_t *pmdp; + pud_t *pudp; + pte_t pte; + + WARN_ON(irqs_disabled()); /* ZZZ debug */ + + local_irq_disable(); + pgdp = pgd_offset(vma->vm_mm, vaddr); + if (unlikely(pgd_none(*pgdp))) + goto err; + + pudp = pud_offset(pgdp, vaddr); + if (unlikely(pud_none(*pudp))) + goto err; + + pmdp = pmd_offset(pudp, vaddr); + if (unlikely(pmd_none(*pmdp))) + goto err; +#ifdef CONFIG_X86_64 + if (unlikely(pmd_large(*pmdp))) + pte = *(pte_t *) pmdp; + else +#endif + pte = *pte_offset_kernel(pmdp, vaddr); + + local_irq_enable(); + + if (unlikely(!pte_present(pte) || + (write && (!pte_write(pte) || !pte_dirty(pte))))) + return 1; + + *paddr = pte_pfn(pte) << PAGE_SHIFT; + *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; + return 0; + +err: + local_irq_enable(); + return 1; +} + +/* + * Drop a TLB entry into the GRU. The fault is described by info in an TFH. + * Input: + * cb Address of user CBR. Null if not running in user context + * Return: + * 0 = dropin, exception, or switch to UPM successful + * 1 = range invalidate active + * < 0 = error code + * + */ +static int gru_try_dropin(struct gru_thread_state *gts, + struct gru_tlb_fault_handle *tfh, + unsigned long __user *cb) +{ + struct mm_struct *mm = gts->ts_mm; + struct vm_area_struct *vma; + int pageshift, asid, write, ret; + unsigned long paddr, gpa, vaddr; + + /* + * NOTE: The GRU contains magic hardware that eliminates races between + * TLB invalidates and TLB dropins. If an invalidate occurs + * in the window between reading the TFH and the subsequent TLB dropin, + * the dropin is ignored. This eliminates the need for additional locks. + */ + + /* + * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call. + * Might be a hardware race OR a stupid user. Ignore FMM because FMM + * is a transient state. + */ + if (tfh->state == TFHSTATE_IDLE) + goto failidle; + if (tfh->state == TFHSTATE_MISS_FMM && cb) + goto failfmm; + + write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0; + vaddr = tfh->missvaddr; + asid = tfh->missasid; + if (asid == 0) + goto failnoasid; + + rmb(); /* TFH must be cache resident before reading ms_range_active */ + + /* + * TFH is cache resident - at least briefly. Fail the dropin + * if a range invalidate is active. + */ + if (atomic_read(>s->ts_gms->ms_range_active)) + goto failactive; + + vma = find_vma(mm, vaddr); + if (!vma) + goto failinval; + + /* + * Atomic lookup is faster & usually works even if called in non-atomic + * context. + */ + ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift); + if (ret) { + if (!cb) + goto failupm; + if (non_atomic_pte_lookup(vma, vaddr, write, &paddr, + &pageshift)) + goto failinval; + } + if (is_gru_paddr(paddr)) + goto failinval; + + paddr = paddr & ~((1UL << pageshift) - 1); + gpa = uv_soc_phys_ram_to_gpa(paddr); + gru_cb_set_istatus_active(cb); + tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write, + GRU_PAGESIZE(pageshift)); + STAT(tlb_dropin); + gru_dbg(grudev, + "%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n", + ret ? "non-atomic" : "atomic", tfh, vaddr, asid, + pageshift, gpa); + return 0; + +failnoasid: + /* No asid (delayed unload). */ + STAT(tlb_dropin_fail_no_asid); + gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + if (!cb) + tfh_user_polling_mode(tfh); + else + gru_flush_cache(tfh); + return -EAGAIN; + +failupm: + /* Atomic failure switch CBR to UPM */ + tfh_user_polling_mode(tfh); + STAT(tlb_dropin_fail_upm); + gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + return 1; + +failfmm: + /* FMM state on UPM call */ + STAT(tlb_dropin_fail_fmm); + gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state); + return 0; + +failidle: + /* TFH was idle - no miss pending */ + gru_flush_cache(tfh); + if (cb) + gru_flush_cache(cb); + STAT(tlb_dropin_fail_idle); + gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state); + return 0; + +failinval: + /* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */ + tfh_exception(tfh); + STAT(tlb_dropin_fail_invalid); + gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + return -EFAULT; + +failactive: + /* Range invalidate active. Switch to UPM iff atomic */ + if (!cb) + tfh_user_polling_mode(tfh); + else + gru_flush_cache(tfh); + STAT(tlb_dropin_fail_range_active); + gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n", + tfh, vaddr); + return 1; +} + +/* + * Process an external interrupt from the GRU. This interrupt is + * caused by a TLB miss. + * Note that this is the interrupt handler that is registered with linux + * interrupt handlers. + */ +irqreturn_t gru_intr(int irq, void *dev_id) +{ + struct gru_state *gru; + struct gru_tlb_fault_map map; + struct gru_thread_state *gts; + struct gru_tlb_fault_handle *tfh = NULL; + int cbrnum, ctxnum; + + STAT(intr); + + gru = irq_to_gru(irq); + if (!gru) { + dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n", + raw_smp_processor_id(), irq); + return IRQ_NONE; + } + get_clear_fault_map(gru, &map); + gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid, + map.fault_bits[0]); + + for_each_cbr_in_tfm(cbrnum, map.fault_bits) { + tfh = get_tfh_by_index(gru, cbrnum); + prefetchw(tfh); /* Helps on hdw, required for emulator */ + + /* + * When hardware sets a bit in the faultmap, it implicitly + * locks the GRU context so that it cannot be unloaded. + * The gts cannot change until a TFH start/writestart command + * is issued. + */ + ctxnum = tfh->ctxnum; + gts = gru->gs_gts[ctxnum]; + + /* + * This is running in interrupt context. Trylock the mmap_sem. + * If it fails, retry the fault in user context. + */ + if (down_read_trylock(>s->ts_mm->mmap_sem)) { + gru_try_dropin(gts, tfh, NULL); + up_read(>s->ts_mm->mmap_sem); + } else { + tfh_user_polling_mode(tfh); + } + } + return IRQ_HANDLED; +} + + +static int gru_user_dropin(struct gru_thread_state *gts, + struct gru_tlb_fault_handle *tfh, + unsigned long __user *cb) +{ + struct gru_mm_struct *gms = gts->ts_gms; + int ret; + + while (1) { + wait_event(gms->ms_wait_queue, + atomic_read(&gms->ms_range_active) == 0); + prefetchw(tfh); /* Helps on hdw, required for emulator */ + ret = gru_try_dropin(gts, tfh, cb); + if (ret <= 0) + return ret; + STAT(call_os_wait_queue); + } +} + +/* + * This interface is called as a result of a user detecting a "call OS" bit + * in a user CB. Normally means that a TLB fault has occurred. + * cb - user virtual address of the CB + */ +int gru_handle_user_call_os(unsigned long cb) +{ + struct gru_tlb_fault_handle *tfh; + struct gru_thread_state *gts; + unsigned long __user *cbp; + int ucbnum, cbrnum, ret = -EINVAL; + + STAT(call_os); + gru_dbg(grudev, "address 0x%lx\n", cb); + + /* sanity check the cb pointer */ + ucbnum = get_cb_number((void *)cb); + if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB) + return -EINVAL; + cbp = (unsigned long *)cb; + + gts = gru_find_lock_gts(cb); + if (!gts) + return -EINVAL; + + if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) { + ret = -EINVAL; + goto exit; + } + + /* + * If force_unload is set, the UPM TLB fault is phony. The task + * has migrated to another node and the GSEG must be moved. Just + * unload the context. The task will page fault and assign a new + * context. + */ + ret = -EAGAIN; + cbrnum = thread_cbr_number(gts, ucbnum); + if (gts->ts_force_unload) { + gru_unload_context(gts, 1); + } else if (gts->ts_gru) { + tfh = get_tfh_by_index(gts->ts_gru, cbrnum); + ret = gru_user_dropin(gts, tfh, cbp); + } +exit: + gru_unlock_gts(gts); + return ret; +} + +/* + * Fetch the exception detail information for a CB that terminated with + * an exception. + */ +int gru_get_exception_detail(unsigned long arg) +{ + struct control_block_extended_exc_detail excdet; + struct gru_control_block_extended *cbe; + struct gru_thread_state *gts; + int ucbnum, cbrnum, ret; + + STAT(user_exception); + if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet))) + return -EFAULT; + + gru_dbg(grudev, "address 0x%lx\n", excdet.cb); + gts = gru_find_lock_gts(excdet.cb); + if (!gts) + return -EINVAL; + + if (gts->ts_gru) { + ucbnum = get_cb_number((void *)excdet.cb); + cbrnum = thread_cbr_number(gts, ucbnum); + cbe = get_cbe_by_index(gts->ts_gru, cbrnum); + excdet.opc = cbe->opccpy; + excdet.exopc = cbe->exopccpy; + excdet.ecause = cbe->ecause; + excdet.exceptdet0 = cbe->idef1upd; + excdet.exceptdet1 = cbe->idef3upd; + ret = 0; + } else { + ret = -EAGAIN; + } + gru_unlock_gts(gts); + + gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb, + excdet.ecause); + if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet))) + ret = -EFAULT; + return ret; +} + +/* + * User request to unload a context. Content is saved for possible reload. + */ +int gru_user_unload_context(unsigned long arg) +{ + struct gru_thread_state *gts; + struct gru_unload_context_req req; + + STAT(user_unload_context); + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + gru_dbg(grudev, "gseg 0x%lx\n", req.gseg); + + gts = gru_find_lock_gts(req.gseg); + if (!gts) + return -EINVAL; + + if (gts->ts_gru) + gru_unload_context(gts, 1); + gru_unlock_gts(gts); + + return 0; +} + +/* + * User request to flush a range of virtual addresses from the GRU TLB + * (Mainly for testing). + */ +int gru_user_flush_tlb(unsigned long arg) +{ + struct gru_thread_state *gts; + struct gru_flush_tlb_req req; + + STAT(user_flush_tlb); + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg, + req.vaddr, req.len); + + gts = gru_find_lock_gts(req.gseg); + if (!gts) + return -EINVAL; + + gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len); + gru_unlock_gts(gts); + + return 0; +} + +/* + * Register the current task as the user of the GSEG slice. + * Needed for TLB fault interrupt targeting. + */ +int gru_set_task_slice(long address) +{ + struct gru_thread_state *gts; + + STAT(set_task_slice); + gru_dbg(grudev, "address 0x%lx\n", address); + gts = gru_alloc_locked_gts(address); + if (!gts) + return -EINVAL; + + gts->ts_tgid_owner = current->tgid; + gru_unlock_gts(gts); + + return 0; +} diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c new file mode 100644 index 000000000000..23c91f5f6b61 --- /dev/null +++ b/drivers/misc/sgi-gru/grufile.c @@ -0,0 +1,485 @@ +/* + * SN Platform GRU Driver + * + * FILE OPERATIONS & DRIVER INITIALIZATION + * + * This file supports the user system call for file open, close, mmap, etc. + * This also incudes the driver initialization code. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/smp_lock.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/miscdevice.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include "gru.h" +#include "grulib.h" +#include "grutables.h" + +#if defined CONFIG_X86_64 +#include <asm/genapic.h> +#include <asm/irq.h> +#define IS_UV() is_uv_system() +#elif defined CONFIG_IA64 +#include <asm/system.h> +#include <asm/sn/simulator.h> +/* temp support for running on hardware simulator */ +#define IS_UV() IS_MEDUSA() || ia64_platform_is("uv") +#else +#define IS_UV() 0 +#endif + +#include <asm/uv/uv_hub.h> +#include <asm/uv/uv_mmrs.h> + +struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly; +unsigned long gru_start_paddr, gru_end_paddr __read_mostly; +struct gru_stats_s gru_stats; + +/* Guaranteed user available resources on each node */ +static int max_user_cbrs, max_user_dsr_bytes; + +static struct file_operations gru_fops; +static struct miscdevice gru_miscdev; + + +/* + * gru_vma_close + * + * Called when unmapping a device mapping. Frees all gru resources + * and tables belonging to the vma. + */ +static void gru_vma_close(struct vm_area_struct *vma) +{ + struct gru_vma_data *vdata; + struct gru_thread_state *gts; + struct list_head *entry, *next; + + if (!vma->vm_private_data) + return; + + vdata = vma->vm_private_data; + vma->vm_private_data = NULL; + gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file, + vdata); + list_for_each_safe(entry, next, &vdata->vd_head) { + gts = + list_entry(entry, struct gru_thread_state, ts_next); + list_del(>s->ts_next); + mutex_lock(>s->ts_ctxlock); + if (gts->ts_gru) + gru_unload_context(gts, 0); + mutex_unlock(>s->ts_ctxlock); + gts_drop(gts); + } + kfree(vdata); + STAT(vdata_free); +} + +/* + * gru_file_mmap + * + * Called when mmaping the device. Initializes the vma with a fault handler + * and private data structure necessary to allocate, track, and free the + * underlying pages. + */ +static int gru_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE)) + return -EPERM; + + if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) || + vma->vm_end & (GRU_GSEG_PAGESIZE - 1)) + return -EINVAL; + + vma->vm_flags |= + (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP | + VM_RESERVED); + vma->vm_page_prot = PAGE_SHARED; + vma->vm_ops = &gru_vm_ops; + + vma->vm_private_data = gru_alloc_vma_data(vma, 0); + if (!vma->vm_private_data) + return -ENOMEM; + + gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n", + file, vma->vm_start, vma, vma->vm_private_data); + return 0; +} + +/* + * Create a new GRU context + */ +static int gru_create_new_context(unsigned long arg) +{ + struct gru_create_context_req req; + struct vm_area_struct *vma; + struct gru_vma_data *vdata; + int ret = -EINVAL; + + + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + if (req.data_segment_bytes == 0 || + req.data_segment_bytes > max_user_dsr_bytes) + return -EINVAL; + if (!req.control_blocks || !req.maximum_thread_count || + req.control_blocks > max_user_cbrs) + return -EINVAL; + + if (!(req.options & GRU_OPT_MISS_MASK)) + req.options |= GRU_OPT_MISS_FMM_INTR; + + down_write(¤t->mm->mmap_sem); + vma = gru_find_vma(req.gseg); + if (vma) { + vdata = vma->vm_private_data; + vdata->vd_user_options = req.options; + vdata->vd_dsr_au_count = + GRU_DS_BYTES_TO_AU(req.data_segment_bytes); + vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks); + ret = 0; + } + up_write(¤t->mm->mmap_sem); + + return ret; +} + +/* + * Get GRU configuration info (temp - for emulator testing) + */ +static long gru_get_config_info(unsigned long arg) +{ + struct gru_config_info info; + int nodesperblade; + + if (num_online_nodes() > 1 && + (uv_node_to_blade_id(1) == uv_node_to_blade_id(0))) + nodesperblade = 2; + else + nodesperblade = 1; + info.cpus = num_online_cpus(); + info.nodes = num_online_nodes(); + info.blades = info.nodes / nodesperblade; + info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades; + + if (copy_to_user((void __user *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; +} + +/* + * Get GRU chiplet status + */ +static long gru_get_chiplet_status(unsigned long arg) +{ + struct gru_state *gru; + struct gru_chiplet_info info; + + if (copy_from_user(&info, (void __user *)arg, sizeof(info))) + return -EFAULT; + + if (info.node == -1) + info.node = numa_node_id(); + if (info.node >= num_possible_nodes() || + info.chiplet >= GRU_CHIPLETS_PER_HUB || + info.node < 0 || info.chiplet < 0) + return -EINVAL; + + info.blade = uv_node_to_blade_id(info.node); + gru = get_gru(info.blade, info.chiplet); + + info.total_dsr_bytes = GRU_NUM_DSR_BYTES; + info.total_cbr = GRU_NUM_CB; + info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES - + gru->gs_reserved_dsr_bytes; + info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs; + info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) * + GRU_DSR_AU_BYTES; + info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + + if (copy_to_user((void __user *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; +} + +/* + * gru_file_unlocked_ioctl + * + * Called to update file attributes via IOCTL calls. + */ +static long gru_file_unlocked_ioctl(struct file *file, unsigned int req, + unsigned long arg) +{ + int err = -EBADRQC; + + gru_dbg(grudev, "file %p\n", file); + + switch (req) { + case GRU_CREATE_CONTEXT: + err = gru_create_new_context(arg); + break; + case GRU_SET_TASK_SLICE: + err = gru_set_task_slice(arg); + break; + case GRU_USER_GET_EXCEPTION_DETAIL: + err = gru_get_exception_detail(arg); + break; + case GRU_USER_UNLOAD_CONTEXT: + err = gru_user_unload_context(arg); + break; + case GRU_GET_CHIPLET_STATUS: + err = gru_get_chiplet_status(arg); + break; + case GRU_USER_FLUSH_TLB: + err = gru_user_flush_tlb(arg); + break; + case GRU_USER_CALL_OS: + err = gru_handle_user_call_os(arg); + break; + case GRU_GET_CONFIG_INFO: + err = gru_get_config_info(arg); + break; + } + return err; +} + +/* + * Called at init time to build tables for all GRUs that are present in the + * system. + */ +static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr, + void *vaddr, int nid, int bid, int grunum) +{ + spin_lock_init(&gru->gs_lock); + spin_lock_init(&gru->gs_asid_lock); + gru->gs_gru_base_paddr = paddr; + gru->gs_gru_base_vaddr = vaddr; + gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum; + gru->gs_blade = gru_base[bid]; + gru->gs_blade_id = bid; + gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1; + gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1; + gru_tgh_flush_init(gru); + gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n", + bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr, + gru->gs_gru_base_paddr); + gru_kservices_init(gru); +} + +static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr) +{ + int pnode, nid, bid, chip; + int cbrs, dsrbytes, n; + int order = get_order(sizeof(struct gru_blade_state)); + struct page *page; + struct gru_state *gru; + unsigned long paddr; + void *vaddr; + + max_user_cbrs = GRU_NUM_CB; + max_user_dsr_bytes = GRU_NUM_DSR_BYTES; + for_each_online_node(nid) { + bid = uv_node_to_blade_id(nid); + pnode = uv_node_to_pnode(nid); + if (gru_base[bid]) + continue; + page = alloc_pages_node(nid, GFP_KERNEL, order); + if (!page) + goto fail; + gru_base[bid] = page_address(page); + memset(gru_base[bid], 0, sizeof(struct gru_blade_state)); + gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0]; + spin_lock_init(&gru_base[bid]->bs_lock); + + dsrbytes = 0; + cbrs = 0; + for (gru = gru_base[bid]->bs_grus, chip = 0; + chip < GRU_CHIPLETS_PER_BLADE; + chip++, gru++) { + paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip); + vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip); + gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip); + n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + cbrs = max(cbrs, n); + n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES; + dsrbytes = max(dsrbytes, n); + } + max_user_cbrs = min(max_user_cbrs, cbrs); + max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes); + } + + return 0; + +fail: + for (nid--; nid >= 0; nid--) + free_pages((unsigned long)gru_base[nid], order); + return -ENOMEM; +} + +#ifdef CONFIG_IA64 + +static int get_base_irq(void) +{ + return IRQ_GRU; +} + +#elif defined CONFIG_X86_64 + +static void noop(unsigned int irq) +{ +} + +static struct irq_chip gru_chip = { + .name = "gru", + .mask = noop, + .unmask = noop, + .ack = noop, +}; + +static int get_base_irq(void) +{ + set_irq_chip(IRQ_GRU, &gru_chip); + set_irq_chip(IRQ_GRU + 1, &gru_chip); + return IRQ_GRU; +} +#endif + +/* + * gru_init + * + * Called at boot or module load time to initialize the GRUs. + */ +static int __init gru_init(void) +{ + int ret, irq, chip; + char id[10]; + void *gru_start_vaddr; + + if (!IS_UV()) + return 0; + +#if defined CONFIG_IA64 + gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */ +#else + gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) & + 0x7fffffffffffUL; + +#endif + gru_start_vaddr = __va(gru_start_paddr); + gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE; + printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n", + gru_start_paddr, gru_end_paddr); + irq = get_base_irq(); + for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) { + ret = request_irq(irq + chip, gru_intr, 0, id, NULL); + if (ret) { + printk(KERN_ERR "%s: request_irq failed\n", + GRU_DRIVER_ID_STR); + goto exit1; + } + } + + ret = misc_register(&gru_miscdev); + if (ret) { + printk(KERN_ERR "%s: misc_register failed\n", + GRU_DRIVER_ID_STR); + goto exit1; + } + + ret = gru_proc_init(); + if (ret) { + printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR); + goto exit2; + } + + ret = gru_init_tables(gru_start_paddr, gru_start_vaddr); + if (ret) { + printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR); + goto exit3; + } + + printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR, + GRU_DRIVER_VERSION_STR); + return 0; + +exit3: + gru_proc_exit(); +exit2: + misc_deregister(&gru_miscdev); +exit1: + for (--chip; chip >= 0; chip--) + free_irq(irq + chip, NULL); + return ret; + +} + +static void __exit gru_exit(void) +{ + int i, bid; + int order = get_order(sizeof(struct gru_state) * + GRU_CHIPLETS_PER_BLADE); + + for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) + free_irq(IRQ_GRU + i, NULL); + + for (bid = 0; bid < GRU_MAX_BLADES; bid++) + free_pages((unsigned long)gru_base[bid], order); + + misc_deregister(&gru_miscdev); + gru_proc_exit(); +} + +static struct file_operations gru_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = gru_file_unlocked_ioctl, + .mmap = gru_file_mmap, +}; + +static struct miscdevice gru_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "gru", + .fops = &gru_fops, +}; + +struct vm_operations_struct gru_vm_ops = { + .close = gru_vma_close, + .fault = gru_fault, +}; + +module_init(gru_init); +module_exit(gru_exit); + +module_param(gru_options, ulong, 0644); +MODULE_PARM_DESC(gru_options, "Various debug options"); + +MODULE_AUTHOR("Silicon Graphics, Inc."); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR); +MODULE_VERSION(GRU_DRIVER_VERSION_STR); + diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h new file mode 100644 index 000000000000..d16031d62673 --- /dev/null +++ b/drivers/misc/sgi-gru/gruhandles.h @@ -0,0 +1,663 @@ +/* + * SN Platform GRU Driver + * + * GRU HANDLE DEFINITION + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRUHANDLES_H__ +#define __GRUHANDLES_H__ +#include "gru_instructions.h" + +/* + * Manifest constants for GRU Memory Map + */ +#define GRU_GSEG0_BASE 0 +#define GRU_MCS_BASE (64 * 1024 * 1024) +#define GRU_SIZE (128UL * 1024 * 1024) + +/* Handle & resource counts */ +#define GRU_NUM_CB 128 +#define GRU_NUM_DSR_BYTES (32 * 1024) +#define GRU_NUM_TFM 16 +#define GRU_NUM_TGH 24 +#define GRU_NUM_CBE 128 +#define GRU_NUM_TFH 128 +#define GRU_NUM_CCH 16 +#define GRU_NUM_GSH 1 + +/* Maximum resource counts that can be reserved by user programs */ +#define GRU_NUM_USER_CBR GRU_NUM_CBE +#define GRU_NUM_USER_DSR_BYTES GRU_NUM_DSR_BYTES + +/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles + * are the same */ +#define GRU_HANDLE_BYTES 64 +#define GRU_HANDLE_STRIDE 256 + +/* Base addresses of handles */ +#define GRU_TFM_BASE (GRU_MCS_BASE + 0x00000) +#define GRU_TGH_BASE (GRU_MCS_BASE + 0x08000) +#define GRU_CBE_BASE (GRU_MCS_BASE + 0x10000) +#define GRU_TFH_BASE (GRU_MCS_BASE + 0x18000) +#define GRU_CCH_BASE (GRU_MCS_BASE + 0x20000) +#define GRU_GSH_BASE (GRU_MCS_BASE + 0x30000) + +/* User gseg constants */ +#define GRU_GSEG_STRIDE (4 * 1024 * 1024) +#define GSEG_BASE(a) ((a) & ~(GRU_GSEG_PAGESIZE - 1)) + +/* Data segment constants */ +#define GRU_DSR_AU_BYTES 1024 +#define GRU_DSR_CL (GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES) +#define GRU_DSR_AU_CL (GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES) +#define GRU_DSR_AU (GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES) + +/* Control block constants */ +#define GRU_CBR_AU_SIZE 2 +#define GRU_CBR_AU (GRU_NUM_CBE / GRU_CBR_AU_SIZE) + +/* Convert resource counts to the number of AU */ +#define GRU_DS_BYTES_TO_AU(n) DIV_ROUND_UP(n, GRU_DSR_AU_BYTES) +#define GRU_CB_COUNT_TO_AU(n) DIV_ROUND_UP(n, GRU_CBR_AU_SIZE) + +/* UV limits */ +#define GRU_CHIPLETS_PER_HUB 2 +#define GRU_HUBS_PER_BLADE 1 +#define GRU_CHIPLETS_PER_BLADE (GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB) + +/* User GRU Gseg offsets */ +#define GRU_CB_BASE 0 +#define GRU_CB_LIMIT (GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE) +#define GRU_DS_BASE 0x20000 +#define GRU_DS_LIMIT (GRU_DS_BASE + GRU_NUM_DSR_BYTES) + +/* Convert a GRU physical address to the chiplet offset */ +#define GSEGPOFF(h) ((h) & (GRU_SIZE - 1)) + +/* Convert an arbitrary handle address to the beginning of the GRU segment */ +#ifndef __PLUGIN__ +#define GRUBASE(h) ((void *)((unsigned long)(h) & ~(GRU_SIZE - 1))) +#else +extern void *gmu_grubase(void *h); +#define GRUBASE(h) gmu_grubase(h) +#endif + +/* General addressing macros. */ +static inline void *get_gseg_base_address(void *base, int ctxnum) +{ + return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum); +} + +static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line) +{ + return (void *)(get_gseg_base_address(base, ctxnum) + + GRU_CB_BASE + GRU_HANDLE_STRIDE * line); +} + +static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line) +{ + return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE + + GRU_CACHE_LINE_BYTES * line); +} + +static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum) +{ + return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum) +{ + return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum) +{ + return (struct gru_control_block_extended *)(base + GRU_CBE_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum) +{ + return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_context_configuration_handle *get_cch(void *base, + int ctxnum) +{ + return (struct gru_context_configuration_handle *)(base + + GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline unsigned long get_cb_number(void *cb) +{ + return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) / + GRU_HANDLE_STRIDE; +} + +/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/ +static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode, + int chiplet) +{ + return paddr + GRU_SIZE * (2 * pnode + chiplet); +} + +static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet) +{ + return vaddr + GRU_SIZE * (2 * pnode + chiplet); +} + + + +/* + * Global TLB Fault Map + * Bitmap of outstanding TLB misses needing interrupt/polling service. + * + */ +struct gru_tlb_fault_map { + unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)]; + unsigned long fill0[2]; + unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)]; + unsigned long fill1[2]; +}; + +/* + * TGH - TLB Global Handle + * Used for TLB flushing. + * + */ +struct gru_tlb_global_handle { + unsigned int cmd:1; /* DW 0 */ + unsigned int delresp:1; + unsigned int opc:1; + unsigned int fill1:5; + + unsigned int fill2:8; + + unsigned int status:2; + unsigned long fill3:2; + unsigned int state:3; + unsigned long fill4:1; + + unsigned int cause:3; + unsigned long fill5:37; + + unsigned long vaddr:64; /* DW 1 */ + + unsigned int asid:24; /* DW 2 */ + unsigned int fill6:8; + + unsigned int pagesize:5; + unsigned int fill7:11; + + unsigned int global:1; + unsigned int fill8:15; + + unsigned long vaddrmask:39; /* DW 3 */ + unsigned int fill9:9; + unsigned int n:10; + unsigned int fill10:6; + + unsigned int ctxbitmap:16; /* DW4 */ + unsigned long fill11[3]; +}; + +enum gru_tgh_cmd { + TGHCMD_START +}; + +enum gru_tgh_opc { + TGHOP_TLBNOP, + TGHOP_TLBINV +}; + +enum gru_tgh_status { + TGHSTATUS_IDLE, + TGHSTATUS_EXCEPTION, + TGHSTATUS_ACTIVE +}; + +enum gru_tgh_state { + TGHSTATE_IDLE, + TGHSTATE_PE_INVAL, + TGHSTATE_INTERRUPT_INVAL, + TGHSTATE_WAITDONE, + TGHSTATE_RESTART_CTX, +}; + +/* + * TFH - TLB Global Handle + * Used for TLB dropins into the GRU TLB. + * + */ +struct gru_tlb_fault_handle { + unsigned int cmd:1; /* DW 0 - low 32*/ + unsigned int delresp:1; + unsigned int fill0:2; + unsigned int opc:3; + unsigned int fill1:9; + + unsigned int status:2; + unsigned int fill2:1; + unsigned int color:1; + unsigned int state:3; + unsigned int fill3:1; + + unsigned int cause:7; /* DW 0 - high 32 */ + unsigned int fill4:1; + + unsigned int indexway:12; + unsigned int fill5:4; + + unsigned int ctxnum:4; + unsigned int fill6:12; + + unsigned long missvaddr:64; /* DW 1 */ + + unsigned int missasid:24; /* DW 2 */ + unsigned int fill7:8; + unsigned int fillasid:24; + unsigned int dirty:1; + unsigned int gaa:2; + unsigned long fill8:5; + + unsigned long pfn:41; /* DW 3 */ + unsigned int fill9:7; + unsigned int pagesize:5; + unsigned int fill10:11; + + unsigned long fillvaddr:64; /* DW 4 */ + + unsigned long fill11[3]; +}; + +enum gru_tfh_opc { + TFHOP_NOOP, + TFHOP_RESTART, + TFHOP_WRITE_ONLY, + TFHOP_WRITE_RESTART, + TFHOP_EXCEPTION, + TFHOP_USER_POLLING_MODE = 7, +}; + +enum tfh_status { + TFHSTATUS_IDLE, + TFHSTATUS_EXCEPTION, + TFHSTATUS_ACTIVE, +}; + +enum tfh_state { + TFHSTATE_INACTIVE, + TFHSTATE_IDLE, + TFHSTATE_MISS_UPM, + TFHSTATE_MISS_FMM, + TFHSTATE_HW_ERR, + TFHSTATE_WRITE_TLB, + TFHSTATE_RESTART_CBR, +}; + +/* TFH cause bits */ +enum tfh_cause { + TFHCAUSE_NONE, + TFHCAUSE_TLB_MISS, + TFHCAUSE_TLB_MOD, + TFHCAUSE_HW_ERROR_RR, + TFHCAUSE_HW_ERROR_MAIN_ARRAY, + TFHCAUSE_HW_ERROR_VALID, + TFHCAUSE_HW_ERROR_PAGESIZE, + TFHCAUSE_INSTRUCTION_EXCEPTION, + TFHCAUSE_UNCORRECTIBLE_ERROR, +}; + +/* GAA values */ +#define GAA_RAM 0x0 +#define GAA_NCRAM 0x2 +#define GAA_MMIO 0x1 +#define GAA_REGISTER 0x3 + +/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */ +#define GRU_PADDR_SHIFT 12 + +/* + * Context Configuration handle + * Used to allocate resources to a GSEG context. + * + */ +struct gru_context_configuration_handle { + unsigned int cmd:1; /* DW0 */ + unsigned int delresp:1; + unsigned int opc:3; + unsigned int unmap_enable:1; + unsigned int req_slice_set_enable:1; + unsigned int req_slice:2; + unsigned int cb_int_enable:1; + unsigned int tlb_int_enable:1; + unsigned int tfm_fault_bit_enable:1; + unsigned int tlb_int_select:4; + + unsigned int status:2; + unsigned int state:2; + unsigned int reserved2:4; + + unsigned int cause:4; + unsigned int tfm_done_bit_enable:1; + unsigned int unused:3; + + unsigned int dsr_allocation_map; + + unsigned long cbr_allocation_map; /* DW1 */ + + unsigned int asid[8]; /* DW 2 - 5 */ + unsigned short sizeavail[8]; /* DW 6 - 7 */ +} __attribute__ ((packed)); + +enum gru_cch_opc { + CCHOP_START = 1, + CCHOP_ALLOCATE, + CCHOP_INTERRUPT, + CCHOP_DEALLOCATE, + CCHOP_INTERRUPT_SYNC, +}; + +enum gru_cch_status { + CCHSTATUS_IDLE, + CCHSTATUS_EXCEPTION, + CCHSTATUS_ACTIVE, +}; + +enum gru_cch_state { + CCHSTATE_INACTIVE, + CCHSTATE_MAPPED, + CCHSTATE_ACTIVE, + CCHSTATE_INTERRUPTED, +}; + +/* CCH Exception cause */ +enum gru_cch_cause { + CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1, + CCHCAUSE_ILLEGAL_OPCODE = 2, + CCHCAUSE_INVALID_START_REQUEST = 3, + CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4, + CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5, + CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6, + CCHCAUSE_CCH_BUSY = 7, + CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8, + CCHCAUSE_BAD_TFM_CONFIG = 9, + CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10, + CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11, + CCHCAUSE_CBR_DEALLOCATION_ERROR = 12, +}; +/* + * CBE - Control Block Extended + * Maintains internal GRU state for active CBs. + * + */ +struct gru_control_block_extended { + unsigned int reserved0:1; /* DW 0 - low */ + unsigned int imacpy:3; + unsigned int reserved1:4; + unsigned int xtypecpy:3; + unsigned int iaa0cpy:2; + unsigned int iaa1cpy:2; + unsigned int reserved2:1; + unsigned int opccpy:8; + unsigned int exopccpy:8; + + unsigned int idef2cpy:22; /* DW 0 - high */ + unsigned int reserved3:10; + + unsigned int idef4cpy:22; /* DW 1 */ + unsigned int reserved4:10; + unsigned int idef4upd:22; + unsigned int reserved5:10; + + unsigned long idef1upd:64; /* DW 2 */ + + unsigned long idef5cpy:64; /* DW 3 */ + + unsigned long idef6cpy:64; /* DW 4 */ + + unsigned long idef3upd:64; /* DW 5 */ + + unsigned long idef5upd:64; /* DW 6 */ + + unsigned int idef2upd:22; /* DW 7 */ + unsigned int reserved6:10; + + unsigned int ecause:20; + unsigned int cbrstate:4; + unsigned int cbrexecstatus:8; +}; + +enum gru_cbr_state { + CBRSTATE_INACTIVE, + CBRSTATE_IDLE, + CBRSTATE_PE_CHECK, + CBRSTATE_QUEUED, + CBRSTATE_WAIT_RESPONSE, + CBRSTATE_INTERRUPTED, + CBRSTATE_INTERRUPTED_MISS_FMM, + CBRSTATE_BUSY_INTERRUPT_MISS_FMM, + CBRSTATE_INTERRUPTED_MISS_UPM, + CBRSTATE_BUSY_INTERRUPTED_MISS_UPM, + CBRSTATE_REQUEST_ISSUE, + CBRSTATE_BUSY_INTERRUPT, +}; + +/* CBE cbrexecstatus bits */ +#define CBR_EXS_ABORT_OCC_BIT 0 +#define CBR_EXS_INT_OCC_BIT 1 +#define CBR_EXS_PENDING_BIT 2 +#define CBR_EXS_QUEUED_BIT 3 +#define CBR_EXS_TLBHW_BIT 4 +#define CBR_EXS_EXCEPTION_BIT 5 + +#define CBR_EXS_ABORT_OCC (1 << CBR_EXS_ABORT_OCC_BIT) +#define CBR_EXS_INT_OCC (1 << CBR_EXS_INT_OCC_BIT) +#define CBR_EXS_PENDING (1 << CBR_EXS_PENDING_BIT) +#define CBR_EXS_QUEUED (1 << CBR_EXS_QUEUED_BIT) +#define CBR_EXS_TLBHW (1 << CBR_EXS_TLBHW_BIT) +#define CBR_EXS_EXCEPTION (1 << CBR_EXS_EXCEPTION_BIT) + +/* CBE ecause bits - defined in gru_instructions.h */ + +/* + * Convert a processor pagesize into the strange encoded pagesize used by the + * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT) + * pagesize log pagesize grupagesize + * 4k 12 0 + * 16k 14 1 + * 64k 16 2 + * 256k 18 3 + * 1m 20 4 + * 2m 21 5 + * 4m 22 6 + * 16m 24 7 + * 64m 26 8 + * ... + */ +#define GRU_PAGESIZE(sh) ((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6) +#define GRU_SIZEAVAIL(sh) (1UL << GRU_PAGESIZE(sh)) + +/* minimum TLB purge count to ensure a full purge */ +#define GRUMAXINVAL 1024UL + + +/* Extract the status field from a kernel handle */ +#define GET_MSEG_HANDLE_STATUS(h) (((*(unsigned long *)(h)) >> 16) & 3) + +static inline void start_instruction(void *h) +{ + unsigned long *w0 = h; + + wmb(); /* setting CMD bit must be last */ + *w0 = *w0 | 1; + gru_flush_cache(h); +} + +static inline int wait_instruction_complete(void *h) +{ + int status; + + do { + cpu_relax(); + barrier(); + status = GET_MSEG_HANDLE_STATUS(h); + } while (status == CCHSTATUS_ACTIVE); + return status; +} + +#if defined CONFIG_IA64 +static inline void cch_allocate_set_asids( + struct gru_context_configuration_handle *cch, int asidval) +{ + int i; + + for (i = 0; i <= RGN_HPAGE; i++) { /* assume HPAGE is last region */ + cch->asid[i] = (asidval++); +#if 0 + /* ZZZ hugepages not supported yet */ + if (i == RGN_HPAGE) + cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift); + else +#endif + cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT); + } +} +#elif defined CONFIG_X86_64 +static inline void cch_allocate_set_asids( + struct gru_context_configuration_handle *cch, int asidval) +{ + int i; + + for (i = 0; i < 8; i++) { + cch->asid[i] = asidval++; + cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) | + GRU_SIZEAVAIL(21); + } +} +#endif + +static inline int cch_allocate(struct gru_context_configuration_handle *cch, + int asidval, unsigned long cbrmap, + unsigned long dsrmap) +{ + cch_allocate_set_asids(cch, asidval); + cch->dsr_allocation_map = dsrmap; + cch->cbr_allocation_map = cbrmap; + cch->opc = CCHOP_ALLOCATE; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_start(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_START; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_interrupt(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_INTERRUPT; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_deallocate(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_DEALLOCATE; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_interrupt_sync(struct gru_context_configuration_handle + *cch) +{ + cch->opc = CCHOP_INTERRUPT_SYNC; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh, + unsigned long vaddr, unsigned long vaddrmask, + int asid, int pagesize, int global, int n, + unsigned short ctxbitmap) +{ + tgh->vaddr = vaddr; + tgh->asid = asid; + tgh->pagesize = pagesize; + tgh->n = n; + tgh->global = global; + tgh->vaddrmask = vaddrmask; + tgh->ctxbitmap = ctxbitmap; + tgh->opc = TGHOP_TLBINV; + start_instruction(tgh); + return wait_instruction_complete(tgh); +} + +static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh, + unsigned long pfn, unsigned long vaddr, + int asid, int dirty, int pagesize) +{ + tfh->fillasid = asid; + tfh->fillvaddr = vaddr; + tfh->pfn = pfn; + tfh->dirty = dirty; + tfh->pagesize = pagesize; + tfh->opc = TFHOP_WRITE_ONLY; + start_instruction(tfh); +} + +static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh, + unsigned long paddr, int gaa, + unsigned long vaddr, int asid, int dirty, + int pagesize) +{ + tfh->fillasid = asid; + tfh->fillvaddr = vaddr; + tfh->pfn = paddr >> GRU_PADDR_SHIFT; + tfh->gaa = gaa; + tfh->dirty = dirty; + tfh->pagesize = pagesize; + tfh->opc = TFHOP_WRITE_RESTART; + start_instruction(tfh); +} + +static inline void tfh_restart(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_RESTART; + start_instruction(tfh); +} + +static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_USER_POLLING_MODE; + start_instruction(tfh); +} + +static inline void tfh_exception(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_EXCEPTION; + start_instruction(tfh); +} + +#endif /* __GRUHANDLES_H__ */ diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c new file mode 100644 index 000000000000..dfd49af0fe18 --- /dev/null +++ b/drivers/misc/sgi-gru/grukservices.c @@ -0,0 +1,679 @@ +/* + * SN Platform GRU Driver + * + * KERNEL SERVICES THAT USE THE GRU + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/smp_lock.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/miscdevice.h> +#include <linux/proc_fs.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include "gru.h" +#include "grulib.h" +#include "grutables.h" +#include "grukservices.h" +#include "gru_instructions.h" +#include <asm/uv/uv_hub.h> + +/* + * Kernel GRU Usage + * + * The following is an interim algorithm for management of kernel GRU + * resources. This will likely be replaced when we better understand the + * kernel/user requirements. + * + * At boot time, the kernel permanently reserves a fixed number of + * CBRs/DSRs for each cpu to use. The resources are all taken from + * the GRU chiplet 1 on the blade. This leaves the full set of resources + * of chiplet 0 available to be allocated to a single user. + */ + +/* Blade percpu resources PERMANENTLY reserved for kernel use */ +#define GRU_NUM_KERNEL_CBR 1 +#define GRU_NUM_KERNEL_DSR_BYTES 256 +#define KERNEL_CTXNUM 15 + +/* GRU instruction attributes for all instructions */ +#define IMA IMA_CB_DELAY + +/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */ +#define __gru_cacheline_aligned__ \ + __attribute__((__aligned__(GRU_CACHE_LINE_BYTES))) + +#define MAGIC 0x1234567887654321UL + +/* Default retry count for GRU errors on kernel instructions */ +#define EXCEPTION_RETRY_LIMIT 3 + +/* Status of message queue sections */ +#define MQS_EMPTY 0 +#define MQS_FULL 1 +#define MQS_NOOP 2 + +/*----------------- RESOURCE MANAGEMENT -------------------------------------*/ +/* optimized for x86_64 */ +struct message_queue { + union gru_mesqhead head __gru_cacheline_aligned__; /* CL 0 */ + int qlines; /* DW 1 */ + long hstatus[2]; + void *next __gru_cacheline_aligned__;/* CL 1 */ + void *limit; + void *start; + void *start2; + char data ____cacheline_aligned; /* CL 2 */ +}; + +/* First word in every message - used by mesq interface */ +struct message_header { + char present; + char present2; + char lines; + char fill; +}; + +#define QLINES(mq) ((mq) + offsetof(struct message_queue, qlines)) +#define HSTATUS(mq, h) ((mq) + offsetof(struct message_queue, hstatus[h])) + +static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr) +{ + struct gru_blade_state *bs; + int lcpu; + + BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES); + preempt_disable(); + bs = gru_base[uv_numa_blade_id()]; + lcpu = uv_blade_processor_id(); + *cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE; + *dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES; + return 0; +} + +static void gru_free_cpu_resources(void *cb, void *dsr) +{ + preempt_enable(); +} + +int gru_get_cb_exception_detail(void *cb, + struct control_block_extended_exc_detail *excdet) +{ + struct gru_control_block_extended *cbe; + + cbe = get_cbe(GRUBASE(cb), get_cb_number(cb)); + excdet->opc = cbe->opccpy; + excdet->exopc = cbe->exopccpy; + excdet->ecause = cbe->ecause; + excdet->exceptdet0 = cbe->idef1upd; + excdet->exceptdet1 = cbe->idef3upd; + return 0; +} + +char *gru_get_cb_exception_detail_str(int ret, void *cb, + char *buf, int size) +{ + struct gru_control_block_status *gen = (void *)cb; + struct control_block_extended_exc_detail excdet; + + if (ret > 0 && gen->istatus == CBS_EXCEPTION) { + gru_get_cb_exception_detail(cb, &excdet); + snprintf(buf, size, + "GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x," + "excdet0 0x%lx, excdet1 0x%x", + gen, excdet.opc, excdet.exopc, excdet.ecause, + excdet.exceptdet0, excdet.exceptdet1); + } else { + snprintf(buf, size, "No exception"); + } + return buf; +} + +static int gru_wait_idle_or_exception(struct gru_control_block_status *gen) +{ + while (gen->istatus >= CBS_ACTIVE) { + cpu_relax(); + barrier(); + } + return gen->istatus; +} + +static int gru_retry_exception(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + struct control_block_extended_exc_detail excdet; + int retry = EXCEPTION_RETRY_LIMIT; + + while (1) { + if (gru_get_cb_message_queue_substatus(cb)) + break; + if (gru_wait_idle_or_exception(gen) == CBS_IDLE) + return CBS_IDLE; + + gru_get_cb_exception_detail(cb, &excdet); + if (excdet.ecause & ~EXCEPTION_RETRY_BITS) + break; + if (retry-- == 0) + break; + gen->icmd = 1; + gru_flush_cache(gen); + } + return CBS_EXCEPTION; +} + +int gru_check_status_proc(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + int ret; + + ret = gen->istatus; + if (ret != CBS_EXCEPTION) + return ret; + return gru_retry_exception(cb); + +} + +int gru_wait_proc(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + int ret; + + ret = gru_wait_idle_or_exception(gen); + if (ret == CBS_EXCEPTION) + ret = gru_retry_exception(cb); + + return ret; +} + +void gru_abort(int ret, void *cb, char *str) +{ + char buf[GRU_EXC_STR_SIZE]; + + panic("GRU FATAL ERROR: %s - %s\n", str, + gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf))); +} + +void gru_wait_abort_proc(void *cb) +{ + int ret; + + ret = gru_wait_proc(cb); + if (ret) + gru_abort(ret, cb, "gru_wait_abort"); +} + + +/*------------------------------ MESSAGE QUEUES -----------------------------*/ + +/* Internal status . These are NOT returned to the user. */ +#define MQIE_AGAIN -1 /* try again */ + + +/* + * Save/restore the "present" flag that is in the second line of 2-line + * messages + */ +static inline int get_present2(void *p) +{ + struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES; + return mhdr->present; +} + +static inline void restore_present2(void *p, int val) +{ + struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES; + mhdr->present = val; +} + +/* + * Create a message queue. + * qlines - message queue size in cache lines. Includes 2-line header. + */ +int gru_create_message_queue(void *p, unsigned int bytes) +{ + struct message_queue *mq = p; + unsigned int qlines; + + qlines = bytes / GRU_CACHE_LINE_BYTES - 2; + memset(mq, 0, bytes); + mq->start = &mq->data; + mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES; + mq->next = &mq->data; + mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES; + mq->qlines = qlines; + mq->hstatus[0] = 0; + mq->hstatus[1] = 1; + mq->head = gru_mesq_head(2, qlines / 2 + 1); + return 0; +} +EXPORT_SYMBOL_GPL(gru_create_message_queue); + +/* + * Send a NOOP message to a message queue + * Returns: + * 0 - if queue is full after the send. This is the normal case + * but various races can change this. + * -1 - if mesq sent successfully but queue not full + * >0 - unexpected error. MQE_xxx returned + */ +static int send_noop_message(void *cb, + unsigned long mq, void *mesg) +{ + const struct message_header noop_header = { + .present = MQS_NOOP, .lines = 1}; + unsigned long m; + int substatus, ret; + struct message_header save_mhdr, *mhdr = mesg; + + STAT(mesq_noop); + save_mhdr = *mhdr; + *mhdr = noop_header; + gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA); + ret = gru_wait(cb); + + if (ret) { + substatus = gru_get_cb_message_queue_substatus(cb); + switch (substatus) { + case CBSS_NO_ERROR: + STAT(mesq_noop_unexpected_error); + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_LB_OVERFLOWED: + STAT(mesq_noop_lb_overflow); + ret = MQE_CONGESTION; + break; + case CBSS_QLIMIT_REACHED: + STAT(mesq_noop_qlimit_reached); + ret = 0; + break; + case CBSS_AMO_NACKED: + STAT(mesq_noop_amo_nacked); + ret = MQE_CONGESTION; + break; + case CBSS_PUT_NACKED: + STAT(mesq_noop_put_nacked); + m = mq + (gru_get_amo_value_head(cb) << 6); + gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1, + IMA); + if (gru_wait(cb) == CBS_IDLE) + ret = MQIE_AGAIN; + else + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_PAGE_OVERFLOW: + default: + BUG(); + } + } + *mhdr = save_mhdr; + return ret; +} + +/* + * Handle a gru_mesq full. + */ +static int send_message_queue_full(void *cb, + unsigned long mq, void *mesg, int lines) +{ + union gru_mesqhead mqh; + unsigned int limit, head; + unsigned long avalue; + int half, qlines, save; + + /* Determine if switching to first/second half of q */ + avalue = gru_get_amo_value(cb); + head = gru_get_amo_value_head(cb); + limit = gru_get_amo_value_limit(cb); + + /* + * Fetch "qlines" from the queue header. Since the queue may be + * in memory that can't be accessed using socket addresses, use + * the GRU to access the data. Use DSR space from the message. + */ + save = *(int *)mesg; + gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + qlines = *(int *)mesg; + *(int *)mesg = save; + half = (limit != qlines); + + if (half) + mqh = gru_mesq_head(qlines / 2 + 1, qlines); + else + mqh = gru_mesq_head(2, qlines / 2 + 1); + + /* Try to get lock for switching head pointer */ + gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + if (!gru_get_amo_value(cb)) { + STAT(mesq_qf_locked); + return MQE_QUEUE_FULL; + } + + /* Got the lock. Send optional NOP if queue not full, */ + if (head != limit) { + if (send_noop_message(cb, mq, mesg)) { + gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), + XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + STAT(mesq_qf_noop_not_full); + return MQIE_AGAIN; + } + avalue++; + } + + /* Then flip queuehead to other half of queue. */ + gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + + /* If not successfully in swapping queue head, clear the hstatus lock */ + if (gru_get_amo_value(cb) != avalue) { + STAT(mesq_qf_switch_head_failed); + gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + } + return MQIE_AGAIN; +cberr: + STAT(mesq_qf_unexpected_error); + return MQE_UNEXPECTED_CB_ERR; +} + + +/* + * Handle a gru_mesq failure. Some of these failures are software recoverable + * or retryable. + */ +static int send_message_failure(void *cb, + unsigned long mq, + void *mesg, + int lines) +{ + int substatus, ret = 0; + unsigned long m; + + substatus = gru_get_cb_message_queue_substatus(cb); + switch (substatus) { + case CBSS_NO_ERROR: + STAT(mesq_send_unexpected_error); + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_LB_OVERFLOWED: + STAT(mesq_send_lb_overflow); + ret = MQE_CONGESTION; + break; + case CBSS_QLIMIT_REACHED: + STAT(mesq_send_qlimit_reached); + ret = send_message_queue_full(cb, mq, mesg, lines); + break; + case CBSS_AMO_NACKED: + STAT(mesq_send_amo_nacked); + ret = MQE_CONGESTION; + break; + case CBSS_PUT_NACKED: + STAT(mesq_send_put_nacked); + m =mq + (gru_get_amo_value_head(cb) << 6); + gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA); + if (gru_wait(cb) == CBS_IDLE) + ret = MQE_OK; + else + ret = MQE_UNEXPECTED_CB_ERR; + break; + default: + BUG(); + } + return ret; +} + +/* + * Send a message to a message queue + * cb GRU control block to use to send message + * mq message queue + * mesg message. ust be vaddr within a GSEG + * bytes message size (<= 2 CL) + */ +int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes) +{ + struct message_header *mhdr; + void *cb; + void *dsr; + int istatus, clines, ret; + + STAT(mesq_send); + BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES); + + clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES; + if (gru_get_cpu_resources(bytes, &cb, &dsr)) + return MQE_BUG_NO_RESOURCES; + memcpy(dsr, mesg, bytes); + mhdr = dsr; + mhdr->present = MQS_FULL; + mhdr->lines = clines; + if (clines == 2) { + mhdr->present2 = get_present2(mhdr); + restore_present2(mhdr, MQS_FULL); + } + + do { + ret = MQE_OK; + gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA); + istatus = gru_wait(cb); + if (istatus != CBS_IDLE) + ret = send_message_failure(cb, mq, dsr, clines); + } while (ret == MQIE_AGAIN); + gru_free_cpu_resources(cb, dsr); + + if (ret) + STAT(mesq_send_failed); + return ret; +} +EXPORT_SYMBOL_GPL(gru_send_message_gpa); + +/* + * Advance the receive pointer for the queue to the next message. + */ +void gru_free_message(void *rmq, void *mesg) +{ + struct message_queue *mq = rmq; + struct message_header *mhdr = mq->next; + void *next, *pnext; + int half = -1; + int lines = mhdr->lines; + + if (lines == 2) + restore_present2(mhdr, MQS_EMPTY); + mhdr->present = MQS_EMPTY; + + pnext = mq->next; + next = pnext + GRU_CACHE_LINE_BYTES * lines; + if (next == mq->limit) { + next = mq->start; + half = 1; + } else if (pnext < mq->start2 && next >= mq->start2) { + half = 0; + } + + if (half >= 0) + mq->hstatus[half] = 1; + mq->next = next; +} +EXPORT_SYMBOL_GPL(gru_free_message); + +/* + * Get next message from message queue. Return NULL if no message + * present. User must call next_message() to move to next message. + * rmq message queue + */ +void *gru_get_next_message(void *rmq) +{ + struct message_queue *mq = rmq; + struct message_header *mhdr = mq->next; + int present = mhdr->present; + + /* skip NOOP messages */ + STAT(mesq_receive); + while (present == MQS_NOOP) { + gru_free_message(rmq, mhdr); + mhdr = mq->next; + present = mhdr->present; + } + + /* Wait for both halves of 2 line messages */ + if (present == MQS_FULL && mhdr->lines == 2 && + get_present2(mhdr) == MQS_EMPTY) + present = MQS_EMPTY; + + if (!present) { + STAT(mesq_receive_none); + return NULL; + } + + if (mhdr->lines == 2) + restore_present2(mhdr, mhdr->present2); + + return mhdr; +} +EXPORT_SYMBOL_GPL(gru_get_next_message); + +/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/ + +/* + * Copy a block of data using the GRU resources + */ +int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa, + unsigned int bytes) +{ + void *cb; + void *dsr; + int ret; + + STAT(copy_gpa); + if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr)) + return MQE_BUG_NO_RESOURCES; + gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr), + XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA); + ret = gru_wait(cb); + gru_free_cpu_resources(cb, dsr); + return ret; +} +EXPORT_SYMBOL_GPL(gru_copy_gpa); + +/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/ +/* Temp - will delete after we gain confidence in the GRU */ +static __cacheline_aligned unsigned long word0; +static __cacheline_aligned unsigned long word1; + +static int quicktest(struct gru_state *gru) +{ + void *cb; + void *ds; + unsigned long *p; + + cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0); + ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0); + p = ds; + word0 = MAGIC; + + gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + BUG(); + + if (*(unsigned long *)ds != MAGIC) + BUG(); + gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + BUG(); + + if (word0 != word1 || word0 != MAGIC) { + printk + ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n", + gru->gs_gid, word1, MAGIC); + BUG(); /* ZZZ should not be fatal */ + } + + return 0; +} + + +int gru_kservices_init(struct gru_state *gru) +{ + struct gru_blade_state *bs; + struct gru_context_configuration_handle *cch; + unsigned long cbr_map, dsr_map; + int err, num, cpus_possible; + + /* + * Currently, resources are reserved ONLY on the second chiplet + * on each blade. This leaves ALL resources on chiplet 0 available + * for user code. + */ + bs = gru->gs_blade; + if (gru != &bs->bs_grus[1]) + return 0; + + cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id); + + num = GRU_NUM_KERNEL_CBR * cpus_possible; + cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL); + gru->gs_reserved_cbrs += num; + + num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible; + dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL); + gru->gs_reserved_dsr_bytes += num; + + gru->gs_active_contexts++; + __set_bit(KERNEL_CTXNUM, &gru->gs_context_map); + cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM); + + bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, + KERNEL_CTXNUM, 0); + bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, + KERNEL_CTXNUM, 0); + + lock_cch_handle(cch); + cch->tfm_fault_bit_enable = 0; + cch->tlb_int_enable = 0; + cch->tfm_done_bit_enable = 0; + cch->unmap_enable = 1; + err = cch_allocate(cch, 0, cbr_map, dsr_map); + if (err) { + gru_dbg(grudev, + "Unable to allocate kernel CCH: gru %d, err %d\n", + gru->gs_gid, err); + BUG(); + } + if (cch_start(cch)) { + gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n", + gru->gs_gid, err); + BUG(); + } + unlock_cch_handle(cch); + + if (gru_options & GRU_QUICKLOOK) + quicktest(gru); + return 0; +} diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h new file mode 100644 index 000000000000..eb17e0a3ac61 --- /dev/null +++ b/drivers/misc/sgi-gru/grukservices.h @@ -0,0 +1,134 @@ + +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __GRU_KSERVICES_H_ +#define __GRU_KSERVICES_H_ + + +/* + * Message queues using the GRU to send/receive messages. + * + * These function allow the user to create a message queue for + * sending/receiving 1 or 2 cacheline messages using the GRU. + * + * Processes SENDING messages will use a kernel CBR/DSR to send + * the message. This is transparent to the caller. + * + * The receiver does not use any GRU resources. + * + * The functions support: + * - single receiver + * - multiple senders + * - cross partition message + * + * Missing features ZZZ: + * - user options for dealing with timeouts, queue full, etc. + * - gru_create_message_queue() needs interrupt vector info + */ + +/* + * Initialize a user allocated chunk of memory to be used as + * a message queue. The caller must ensure that the queue is + * in contiguous physical memory and is cacheline aligned. + * + * Message queue size is the total number of bytes allocated + * to the queue including a 2 cacheline header that is used + * to manage the queue. + * + * Input: + * p pointer to user allocated memory. + * bytes size of message queue in bytes + * + * Errors: + * 0 OK + * >0 error + */ +extern int gru_create_message_queue(void *p, unsigned int bytes); + +/* + * Send a message to a message queue. + * + * Note: The message queue transport mechanism uses the first 32 + * bits of the message. Users should avoid using these bits. + * + * + * Input: + * xmq message queue - must be a UV global physical address + * mesg pointer to message. Must be 64-bit aligned + * bytes size of message in bytes + * + * Output: + * 0 message sent + * >0 Send failure - see error codes below + * + */ +extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg, + unsigned int bytes); + +/* Status values for gru_send_message() */ +#define MQE_OK 0 /* message sent successfully */ +#define MQE_CONGESTION 1 /* temporary congestion, try again */ +#define MQE_QUEUE_FULL 2 /* queue is full */ +#define MQE_UNEXPECTED_CB_ERR 3 /* unexpected CB error */ +#define MQE_PAGE_OVERFLOW 10 /* BUG - queue overflowed a page */ +#define MQE_BUG_NO_RESOURCES 11 /* BUG - could not alloc GRU cb/dsr */ + +/* + * Advance the receive pointer for the message queue to the next message. + * Note: current API requires messages to be gotten & freed in order. Future + * API extensions may allow for out-of-order freeing. + * + * Input + * mq message queue + * mesq message being freed + */ +extern void gru_free_message(void *mq, void *mesq); + +/* + * Get next message from message queue. Returns pointer to + * message OR NULL if no message present. + * User must call gru_free_message() after message is processed + * in order to move the queue pointers to next message. + * + * Input + * mq message queue + * + * Output: + * p pointer to message + * NULL no message available + */ +extern void *gru_get_next_message(void *mq); + + +/* + * Copy data using the GRU. Source or destination can be located in a remote + * partition. + * + * Input: + * dest_gpa destination global physical address + * src_gpa source global physical address + * bytes number of bytes to copy + * + * Output: + * 0 OK + * >0 error + */ +extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa, + unsigned int bytes); + +#endif /* __GRU_KSERVICES_H_ */ diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h new file mode 100644 index 000000000000..e56e196a6998 --- /dev/null +++ b/drivers/misc/sgi-gru/grulib.h @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRULIB_H__ +#define __GRULIB_H__ + +#define GRU_BASENAME "gru" +#define GRU_FULLNAME "/dev/gru" +#define GRU_IOCTL_NUM 'G' + +/* + * Maximum number of GRU segments that a user can have open + * ZZZ temp - set high for testing. Revisit. + */ +#define GRU_MAX_OPEN_CONTEXTS 32 + +/* Set Number of Request Blocks */ +#define GRU_CREATE_CONTEXT _IOWR(GRU_IOCTL_NUM, 1, void *) + +/* Register task as using the slice */ +#define GRU_SET_TASK_SLICE _IOWR(GRU_IOCTL_NUM, 5, void *) + +/* Fetch exception detail */ +#define GRU_USER_GET_EXCEPTION_DETAIL _IOWR(GRU_IOCTL_NUM, 6, void *) + +/* For user call_os handling - normally a TLB fault */ +#define GRU_USER_CALL_OS _IOWR(GRU_IOCTL_NUM, 8, void *) + +/* For user unload context */ +#define GRU_USER_UNLOAD_CONTEXT _IOWR(GRU_IOCTL_NUM, 9, void *) + +/* For fetching GRU chiplet status */ +#define GRU_GET_CHIPLET_STATUS _IOWR(GRU_IOCTL_NUM, 10, void *) + +/* For user TLB flushing (primarily for tests) */ +#define GRU_USER_FLUSH_TLB _IOWR(GRU_IOCTL_NUM, 50, void *) + +/* Get some config options (primarily for tests & emulator) */ +#define GRU_GET_CONFIG_INFO _IOWR(GRU_IOCTL_NUM, 51, void *) + +#define CONTEXT_WINDOW_BYTES(th) (GRU_GSEG_PAGESIZE * (th)) +#define THREAD_POINTER(p, th) (p + GRU_GSEG_PAGESIZE * (th)) + +/* + * Structure used to pass TLB flush parameters to the driver + */ +struct gru_create_context_req { + unsigned long gseg; + unsigned int data_segment_bytes; + unsigned int control_blocks; + unsigned int maximum_thread_count; + unsigned int options; +}; + +/* + * Structure used to pass unload context parameters to the driver + */ +struct gru_unload_context_req { + unsigned long gseg; +}; + +/* + * Structure used to pass TLB flush parameters to the driver + */ +struct gru_flush_tlb_req { + unsigned long gseg; + unsigned long vaddr; + size_t len; +}; + +/* + * GRU configuration info (temp - for testing) + */ +struct gru_config_info { + int cpus; + int blades; + int nodes; + int chiplets; + int fill[16]; +}; + +#endif /* __GRULIB_H__ */ diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c new file mode 100644 index 000000000000..0eeb8dddd2f5 --- /dev/null +++ b/drivers/misc/sgi-gru/grumain.c @@ -0,0 +1,802 @@ +/* + * SN Platform GRU Driver + * + * DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/list.h> +#include <asm/uv/uv_hub.h> +#include "gru.h" +#include "grutables.h" +#include "gruhandles.h" + +unsigned long gru_options __read_mostly; + +static struct device_driver gru_driver = { + .name = "gru" +}; + +static struct device gru_device = { + .bus_id = {0}, + .driver = &gru_driver, +}; + +struct device *grudev = &gru_device; + +/* + * Select a gru fault map to be used by the current cpu. Note that + * multiple cpus may be using the same map. + * ZZZ should "shift" be used?? Depends on HT cpu numbering + * ZZZ should be inline but did not work on emulator + */ +int gru_cpu_fault_map_id(void) +{ + return uv_blade_processor_id() % GRU_NUM_TFM; +} + +/*--------- ASID Management ------------------------------------------- + * + * Initially, assign asids sequentially from MIN_ASID .. MAX_ASID. + * Once MAX is reached, flush the TLB & start over. However, + * some asids may still be in use. There won't be many (percentage wise) still + * in use. Search active contexts & determine the value of the first + * asid in use ("x"s below). Set "limit" to this value. + * This defines a block of assignable asids. + * + * When "limit" is reached, search forward from limit+1 and determine the + * next block of assignable asids. + * + * Repeat until MAX_ASID is reached, then start over again. + * + * Each time MAX_ASID is reached, increment the asid generation. Since + * the search for in-use asids only checks contexts with GRUs currently + * assigned, asids in some contexts will be missed. Prior to loading + * a context, the asid generation of the GTS asid is rechecked. If it + * doesn't match the current generation, a new asid will be assigned. + * + * 0---------------x------------x---------------------x----| + * ^-next ^-limit ^-MAX_ASID + * + * All asid manipulation & context loading/unloading is protected by the + * gs_lock. + */ + +/* Hit the asid limit. Start over */ +static int gru_wrap_asid(struct gru_state *gru) +{ + gru_dbg(grudev, "gru %p\n", gru); + STAT(asid_wrap); + gru->gs_asid_gen++; + gru_flush_all_tlb(gru); + return MIN_ASID; +} + +/* Find the next chunk of unused asids */ +static int gru_reset_asid_limit(struct gru_state *gru, int asid) +{ + int i, gid, inuse_asid, limit; + + gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid); + STAT(asid_next); + limit = MAX_ASID; + if (asid >= limit) + asid = gru_wrap_asid(gru); + gid = gru->gs_gid; +again: + for (i = 0; i < GRU_NUM_CCH; i++) { + if (!gru->gs_gts[i]) + continue; + inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid; + gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n", + gru, inuse_asid, i, gru->gs_gts[i]); + if (inuse_asid == asid) { + asid += ASID_INC; + if (asid >= limit) { + /* + * empty range: reset the range limit and + * start over + */ + limit = MAX_ASID; + if (asid >= MAX_ASID) + asid = gru_wrap_asid(gru); + goto again; + } + } + + if ((inuse_asid > asid) && (inuse_asid < limit)) + limit = inuse_asid; + } + gru->gs_asid_limit = limit; + gru->gs_asid = asid; + gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid, + limit); + return asid; +} + +/* Assign a new ASID to a thread context. */ +static int gru_assign_asid(struct gru_state *gru) +{ + int asid; + + spin_lock(&gru->gs_asid_lock); + gru->gs_asid += ASID_INC; + asid = gru->gs_asid; + if (asid >= gru->gs_asid_limit) + asid = gru_reset_asid_limit(gru, asid); + spin_unlock(&gru->gs_asid_lock); + + gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid); + return asid; +} + +/* + * Clear n bits in a word. Return a word indicating the bits that were cleared. + * Optionally, build an array of chars that contain the bit numbers allocated. + */ +static unsigned long reserve_resources(unsigned long *p, int n, int mmax, + char *idx) +{ + unsigned long bits = 0; + int i; + + do { + i = find_first_bit(p, mmax); + if (i == mmax) + BUG(); + __clear_bit(i, p); + __set_bit(i, &bits); + if (idx) + *idx++ = i; + } while (--n); + return bits; +} + +unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count, + char *cbmap) +{ + return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU, + cbmap); +} + +unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count, + char *dsmap) +{ + return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU, + dsmap); +} + +static void reserve_gru_resources(struct gru_state *gru, + struct gru_thread_state *gts) +{ + gru->gs_active_contexts++; + gts->ts_cbr_map = + gru_reserve_cb_resources(gru, gts->ts_cbr_au_count, + gts->ts_cbr_idx); + gts->ts_dsr_map = + gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL); +} + +static void free_gru_resources(struct gru_state *gru, + struct gru_thread_state *gts) +{ + gru->gs_active_contexts--; + gru->gs_cbr_map |= gts->ts_cbr_map; + gru->gs_dsr_map |= gts->ts_dsr_map; +} + +/* + * Check if a GRU has sufficient free resources to satisfy an allocation + * request. Note: GRU locks may or may not be held when this is called. If + * not held, recheck after acquiring the appropriate locks. + * + * Returns 1 if sufficient resources, 0 if not + */ +static int check_gru_resources(struct gru_state *gru, int cbr_au_count, + int dsr_au_count, int max_active_contexts) +{ + return hweight64(gru->gs_cbr_map) >= cbr_au_count + && hweight64(gru->gs_dsr_map) >= dsr_au_count + && gru->gs_active_contexts < max_active_contexts; +} + +/* + * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG + * context. + */ +static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms, + int ctxnum) +{ + struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid]; + unsigned short ctxbitmap = (1 << ctxnum); + int asid; + + spin_lock(&gms->ms_asid_lock); + asid = asids->mt_asid; + + if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) { + asid = gru_assign_asid(gru); + asids->mt_asid = asid; + asids->mt_asid_gen = gru->gs_asid_gen; + STAT(asid_new); + } else { + STAT(asid_reuse); + } + + BUG_ON(asids->mt_ctxbitmap & ctxbitmap); + asids->mt_ctxbitmap |= ctxbitmap; + if (!test_bit(gru->gs_gid, gms->ms_asidmap)) + __set_bit(gru->gs_gid, gms->ms_asidmap); + spin_unlock(&gms->ms_asid_lock); + + gru_dbg(grudev, + "gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n", + gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]); + return asid; +} + +static void gru_unload_mm_tracker(struct gru_state *gru, + struct gru_mm_struct *gms, int ctxnum) +{ + struct gru_mm_tracker *asids; + unsigned short ctxbitmap; + + asids = &gms->ms_asids[gru->gs_gid]; + ctxbitmap = (1 << ctxnum); + spin_lock(&gms->ms_asid_lock); + BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap); + asids->mt_ctxbitmap ^= ctxbitmap; + gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n", + gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]); + spin_unlock(&gms->ms_asid_lock); +} + +/* + * Decrement the reference count on a GTS structure. Free the structure + * if the reference count goes to zero. + */ +void gts_drop(struct gru_thread_state *gts) +{ + if (gts && atomic_dec_return(>s->ts_refcnt) == 0) { + gru_drop_mmu_notifier(gts->ts_gms); + kfree(gts); + STAT(gts_free); + } +} + +/* + * Locate the GTS structure for the current thread. + */ +static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data + *vdata, int tsid) +{ + struct gru_thread_state *gts; + + list_for_each_entry(gts, &vdata->vd_head, ts_next) + if (gts->ts_tsid == tsid) + return gts; + return NULL; +} + +/* + * Allocate a thread state structure. + */ +static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma, + struct gru_vma_data *vdata, + int tsid) +{ + struct gru_thread_state *gts; + int bytes; + + bytes = DSR_BYTES(vdata->vd_dsr_au_count) + + CBR_BYTES(vdata->vd_cbr_au_count); + bytes += sizeof(struct gru_thread_state); + gts = kzalloc(bytes, GFP_KERNEL); + if (!gts) + return NULL; + + STAT(gts_alloc); + atomic_set(>s->ts_refcnt, 1); + mutex_init(>s->ts_ctxlock); + gts->ts_cbr_au_count = vdata->vd_cbr_au_count; + gts->ts_dsr_au_count = vdata->vd_dsr_au_count; + gts->ts_user_options = vdata->vd_user_options; + gts->ts_tsid = tsid; + gts->ts_user_options = vdata->vd_user_options; + gts->ts_ctxnum = NULLCTX; + gts->ts_mm = current->mm; + gts->ts_vma = vma; + gts->ts_tlb_int_select = -1; + gts->ts_gms = gru_register_mmu_notifier(); + if (!gts->ts_gms) + goto err; + + gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts); + return gts; + +err: + gts_drop(gts); + return NULL; +} + +/* + * Allocate a vma private data structure. + */ +struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid) +{ + struct gru_vma_data *vdata = NULL; + + vdata = kmalloc(sizeof(*vdata), GFP_KERNEL); + if (!vdata) + return NULL; + + INIT_LIST_HEAD(&vdata->vd_head); + spin_lock_init(&vdata->vd_lock); + gru_dbg(grudev, "alloc vdata %p\n", vdata); + return vdata; +} + +/* + * Find the thread state structure for the current thread. + */ +struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma, + int tsid) +{ + struct gru_vma_data *vdata = vma->vm_private_data; + struct gru_thread_state *gts; + + spin_lock(&vdata->vd_lock); + gts = gru_find_current_gts_nolock(vdata, tsid); + spin_unlock(&vdata->vd_lock); + gru_dbg(grudev, "vma %p, gts %p\n", vma, gts); + return gts; +} + +/* + * Allocate a new thread state for a GSEG. Note that races may allow + * another thread to race to create a gts. + */ +struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma, + int tsid) +{ + struct gru_vma_data *vdata = vma->vm_private_data; + struct gru_thread_state *gts, *ngts; + + gts = gru_alloc_gts(vma, vdata, tsid); + if (!gts) + return NULL; + + spin_lock(&vdata->vd_lock); + ngts = gru_find_current_gts_nolock(vdata, tsid); + if (ngts) { + gts_drop(gts); + gts = ngts; + STAT(gts_double_allocate); + } else { + list_add(>s->ts_next, &vdata->vd_head); + } + spin_unlock(&vdata->vd_lock); + gru_dbg(grudev, "vma %p, gts %p\n", vma, gts); + return gts; +} + +/* + * Free the GRU context assigned to the thread state. + */ +static void gru_free_gru_context(struct gru_thread_state *gts) +{ + struct gru_state *gru; + + gru = gts->ts_gru; + gru_dbg(grudev, "gts %p, gru %p\n", gts, gru); + + spin_lock(&gru->gs_lock); + gru->gs_gts[gts->ts_ctxnum] = NULL; + free_gru_resources(gru, gts); + BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0); + __clear_bit(gts->ts_ctxnum, &gru->gs_context_map); + gts->ts_ctxnum = NULLCTX; + gts->ts_gru = NULL; + spin_unlock(&gru->gs_lock); + + gts_drop(gts); + STAT(free_context); +} + +/* + * Prefetching cachelines help hardware performance. + * (Strictly a performance enhancement. Not functionally required). + */ +static void prefetch_data(void *p, int num, int stride) +{ + while (num-- > 0) { + prefetchw(p); + p += stride; + } +} + +static inline long gru_copy_handle(void *d, void *s) +{ + memcpy(d, s, GRU_HANDLE_BYTES); + return GRU_HANDLE_BYTES; +} + +/* rewrite in assembly & use lots of prefetch */ +static void gru_load_context_data(void *save, void *grubase, int ctxnum, + unsigned long cbrmap, unsigned long dsrmap) +{ + void *gseg, *cb, *cbe; + unsigned long length; + int i, scr; + + gseg = grubase + ctxnum * GRU_GSEG_STRIDE; + length = hweight64(dsrmap) * GRU_DSR_AU_BYTES; + prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES, + GRU_CACHE_LINE_BYTES); + + cb = gseg + GRU_CB_BASE; + cbe = grubase + GRU_CBE_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES); + prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1, + GRU_CACHE_LINE_BYTES); + cb += GRU_HANDLE_STRIDE; + } + + cb = gseg + GRU_CB_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + save += gru_copy_handle(cb, save); + save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save); + cb += GRU_HANDLE_STRIDE; + } + + memcpy(gseg + GRU_DS_BASE, save, length); +} + +static void gru_unload_context_data(void *save, void *grubase, int ctxnum, + unsigned long cbrmap, unsigned long dsrmap) +{ + void *gseg, *cb, *cbe; + unsigned long length; + int i, scr; + + gseg = grubase + ctxnum * GRU_GSEG_STRIDE; + + cb = gseg + GRU_CB_BASE; + cbe = grubase + GRU_CBE_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + save += gru_copy_handle(save, cb); + save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE); + cb += GRU_HANDLE_STRIDE; + } + length = hweight64(dsrmap) * GRU_DSR_AU_BYTES; + memcpy(save, gseg + GRU_DS_BASE, length); +} + +void gru_unload_context(struct gru_thread_state *gts, int savestate) +{ + struct gru_state *gru = gts->ts_gru; + struct gru_context_configuration_handle *cch; + int ctxnum = gts->ts_ctxnum; + + zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE); + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + if (cch_interrupt_sync(cch)) + BUG(); + gru_dbg(grudev, "gts %p\n", gts); + + gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum); + if (savestate) + gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, + ctxnum, gts->ts_cbr_map, + gts->ts_dsr_map); + + if (cch_deallocate(cch)) + BUG(); + gts->ts_force_unload = 0; /* ts_force_unload locked by CCH lock */ + unlock_cch_handle(cch); + + gru_free_gru_context(gts); + STAT(unload_context); +} + +/* + * Load a GRU context by copying it from the thread data structure in memory + * to the GRU. + */ +static void gru_load_context(struct gru_thread_state *gts) +{ + struct gru_state *gru = gts->ts_gru; + struct gru_context_configuration_handle *cch; + int err, asid, ctxnum = gts->ts_ctxnum; + + gru_dbg(grudev, "gts %p\n", gts); + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum); + cch->tfm_fault_bit_enable = + (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL + || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR); + cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR); + if (cch->tlb_int_enable) { + gts->ts_tlb_int_select = gru_cpu_fault_map_id(); + cch->tlb_int_select = gts->ts_tlb_int_select; + } + cch->tfm_done_bit_enable = 0; + err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map); + if (err) { + gru_dbg(grudev, + "err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n", + err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map); + BUG(); + } + + gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum, + gts->ts_cbr_map, gts->ts_dsr_map); + + if (cch_start(cch)) + BUG(); + unlock_cch_handle(cch); + + STAT(load_context); +} + +/* + * Update fields in an active CCH: + * - retarget interrupts on local blade + * - force a delayed context unload by clearing the CCH asids. This + * forces TLB misses for new GRU instructions. The context is unloaded + * when the next TLB miss occurs. + */ +static int gru_update_cch(struct gru_thread_state *gts, int int_select) +{ + struct gru_context_configuration_handle *cch; + struct gru_state *gru = gts->ts_gru; + int i, ctxnum = gts->ts_ctxnum, ret = 0; + + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + if (cch->state == CCHSTATE_ACTIVE) { + if (gru->gs_gts[gts->ts_ctxnum] != gts) + goto exit; + if (cch_interrupt(cch)) + BUG(); + if (int_select >= 0) { + gts->ts_tlb_int_select = int_select; + cch->tlb_int_select = int_select; + } else { + for (i = 0; i < 8; i++) + cch->asid[i] = 0; + cch->tfm_fault_bit_enable = 0; + cch->tlb_int_enable = 0; + gts->ts_force_unload = 1; + } + if (cch_start(cch)) + BUG(); + ret = 1; + } +exit: + unlock_cch_handle(cch); + return ret; +} + +/* + * Update CCH tlb interrupt select. Required when all the following is true: + * - task's GRU context is loaded into a GRU + * - task is using interrupt notification for TLB faults + * - task has migrated to a different cpu on the same blade where + * it was previously running. + */ +static int gru_retarget_intr(struct gru_thread_state *gts) +{ + if (gts->ts_tlb_int_select < 0 + || gts->ts_tlb_int_select == gru_cpu_fault_map_id()) + return 0; + + gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select, + gru_cpu_fault_map_id()); + return gru_update_cch(gts, gru_cpu_fault_map_id()); +} + + +/* + * Insufficient GRU resources available on the local blade. Steal a context from + * a process. This is a hack until a _real_ resource scheduler is written.... + */ +#define next_ctxnum(n) ((n) < GRU_NUM_CCH - 2 ? (n) + 1 : 0) +#define next_gru(b, g) (((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ? \ + ((g)+1) : &(b)->bs_grus[0]) + +static void gru_steal_context(struct gru_thread_state *gts) +{ + struct gru_blade_state *blade; + struct gru_state *gru, *gru0; + struct gru_thread_state *ngts = NULL; + int ctxnum, ctxnum0, flag = 0, cbr, dsr; + + cbr = gts->ts_cbr_au_count; + dsr = gts->ts_dsr_au_count; + + preempt_disable(); + blade = gru_base[uv_numa_blade_id()]; + spin_lock(&blade->bs_lock); + + ctxnum = next_ctxnum(blade->bs_lru_ctxnum); + gru = blade->bs_lru_gru; + if (ctxnum == 0) + gru = next_gru(blade, gru); + ctxnum0 = ctxnum; + gru0 = gru; + while (1) { + if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH)) + break; + spin_lock(&gru->gs_lock); + for (; ctxnum < GRU_NUM_CCH; ctxnum++) { + if (flag && gru == gru0 && ctxnum == ctxnum0) + break; + ngts = gru->gs_gts[ctxnum]; + /* + * We are grabbing locks out of order, so trylock is + * needed. GTSs are usually not locked, so the odds of + * success are high. If trylock fails, try to steal a + * different GSEG. + */ + if (ngts && mutex_trylock(&ngts->ts_ctxlock)) + break; + ngts = NULL; + flag = 1; + } + spin_unlock(&gru->gs_lock); + if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0)) + break; + ctxnum = 0; + gru = next_gru(blade, gru); + } + blade->bs_lru_gru = gru; + blade->bs_lru_ctxnum = ctxnum; + spin_unlock(&blade->bs_lock); + preempt_enable(); + + if (ngts) { + STAT(steal_context); + ngts->ts_steal_jiffies = jiffies; + gru_unload_context(ngts, 1); + mutex_unlock(&ngts->ts_ctxlock); + } else { + STAT(steal_context_failed); + } + gru_dbg(grudev, + "stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;" + " avail cb %ld, ds %ld\n", + gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map), + hweight64(gru->gs_dsr_map)); +} + +/* + * Scan the GRUs on the local blade & assign a GRU context. + */ +static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts) +{ + struct gru_state *gru, *grux; + int i, max_active_contexts; + + preempt_disable(); + +again: + gru = NULL; + max_active_contexts = GRU_NUM_CCH; + for_each_gru_on_blade(grux, uv_numa_blade_id(), i) { + if (check_gru_resources(grux, gts->ts_cbr_au_count, + gts->ts_dsr_au_count, + max_active_contexts)) { + gru = grux; + max_active_contexts = grux->gs_active_contexts; + if (max_active_contexts == 0) + break; + } + } + + if (gru) { + spin_lock(&gru->gs_lock); + if (!check_gru_resources(gru, gts->ts_cbr_au_count, + gts->ts_dsr_au_count, GRU_NUM_CCH)) { + spin_unlock(&gru->gs_lock); + goto again; + } + reserve_gru_resources(gru, gts); + gts->ts_gru = gru; + gts->ts_ctxnum = + find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH); + BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH); + atomic_inc(>s->ts_refcnt); + gru->gs_gts[gts->ts_ctxnum] = gts; + __set_bit(gts->ts_ctxnum, &gru->gs_context_map); + spin_unlock(&gru->gs_lock); + + STAT(assign_context); + gru_dbg(grudev, + "gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n", + gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts, + gts->ts_gru->gs_gid, gts->ts_ctxnum, + gts->ts_cbr_au_count, gts->ts_dsr_au_count); + } else { + gru_dbg(grudev, "failed to allocate a GTS %s\n", ""); + STAT(assign_context_failed); + } + + preempt_enable(); + return gru; +} + +/* + * gru_nopage + * + * Map the user's GRU segment + * + * Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries. + */ +int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct gru_thread_state *gts; + unsigned long paddr, vaddr; + + vaddr = (unsigned long)vmf->virtual_address; + gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n", + vma, vaddr, GSEG_BASE(vaddr)); + STAT(nopfn); + + /* The following check ensures vaddr is a valid address in the VMA */ + gts = gru_find_thread_state(vma, TSID(vaddr, vma)); + if (!gts) + return VM_FAULT_SIGBUS; + +again: + preempt_disable(); + mutex_lock(>s->ts_ctxlock); + if (gts->ts_gru) { + if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) { + STAT(migrated_nopfn_unload); + gru_unload_context(gts, 1); + } else { + if (gru_retarget_intr(gts)) + STAT(migrated_nopfn_retarget); + } + } + + if (!gts->ts_gru) { + if (!gru_assign_gru_context(gts)) { + mutex_unlock(>s->ts_ctxlock); + preempt_enable(); + schedule_timeout(GRU_ASSIGN_DELAY); /* true hack ZZZ */ + if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies) + gru_steal_context(gts); + goto again; + } + gru_load_context(gts); + paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum); + remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1), + paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE, + vma->vm_page_prot); + } + + mutex_unlock(>s->ts_ctxlock); + preempt_enable(); + + return VM_FAULT_NOPAGE; +} + diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c new file mode 100644 index 000000000000..533923f83f1a --- /dev/null +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -0,0 +1,336 @@ +/* + * SN Platform GRU Driver + * + * PROC INTERFACES + * + * This file supports the /proc interfaces for the GRU driver + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/proc_fs.h> +#include <linux/device.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include "gru.h" +#include "grulib.h" +#include "grutables.h" + +#define printstat(s, f) printstat_val(s, &gru_stats.f, #f) + +static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id) +{ + unsigned long val = atomic_long_read(v); + + if (val) + seq_printf(s, "%16lu %s\n", val, id); +} + +static int statistics_show(struct seq_file *s, void *p) +{ + printstat(s, vdata_alloc); + printstat(s, vdata_free); + printstat(s, gts_alloc); + printstat(s, gts_free); + printstat(s, vdata_double_alloc); + printstat(s, gts_double_allocate); + printstat(s, assign_context); + printstat(s, assign_context_failed); + printstat(s, free_context); + printstat(s, load_context); + printstat(s, unload_context); + printstat(s, steal_context); + printstat(s, steal_context_failed); + printstat(s, nopfn); + printstat(s, break_cow); + printstat(s, asid_new); + printstat(s, asid_next); + printstat(s, asid_wrap); + printstat(s, asid_reuse); + printstat(s, intr); + printstat(s, call_os); + printstat(s, call_os_check_for_bug); + printstat(s, call_os_wait_queue); + printstat(s, user_flush_tlb); + printstat(s, user_unload_context); + printstat(s, user_exception); + printstat(s, set_task_slice); + printstat(s, migrate_check); + printstat(s, migrated_retarget); + printstat(s, migrated_unload); + printstat(s, migrated_unload_delay); + printstat(s, migrated_nopfn_retarget); + printstat(s, migrated_nopfn_unload); + printstat(s, tlb_dropin); + printstat(s, tlb_dropin_fail_no_asid); + printstat(s, tlb_dropin_fail_upm); + printstat(s, tlb_dropin_fail_invalid); + printstat(s, tlb_dropin_fail_range_active); + printstat(s, tlb_dropin_fail_idle); + printstat(s, tlb_dropin_fail_fmm); + printstat(s, mmu_invalidate_range); + printstat(s, mmu_invalidate_page); + printstat(s, mmu_clear_flush_young); + printstat(s, flush_tlb); + printstat(s, flush_tlb_gru); + printstat(s, flush_tlb_gru_tgh); + printstat(s, flush_tlb_gru_zero_asid); + printstat(s, copy_gpa); + printstat(s, mesq_receive); + printstat(s, mesq_receive_none); + printstat(s, mesq_send); + printstat(s, mesq_send_failed); + printstat(s, mesq_noop); + printstat(s, mesq_send_unexpected_error); + printstat(s, mesq_send_lb_overflow); + printstat(s, mesq_send_qlimit_reached); + printstat(s, mesq_send_amo_nacked); + printstat(s, mesq_send_put_nacked); + printstat(s, mesq_qf_not_full); + printstat(s, mesq_qf_locked); + printstat(s, mesq_qf_noop_not_full); + printstat(s, mesq_qf_switch_head_failed); + printstat(s, mesq_qf_unexpected_error); + printstat(s, mesq_noop_unexpected_error); + printstat(s, mesq_noop_lb_overflow); + printstat(s, mesq_noop_qlimit_reached); + printstat(s, mesq_noop_amo_nacked); + printstat(s, mesq_noop_put_nacked); + return 0; +} + +static ssize_t statistics_write(struct file *file, const char __user *userbuf, + size_t count, loff_t *data) +{ + memset(&gru_stats, 0, sizeof(gru_stats)); + return count; +} + +static int options_show(struct seq_file *s, void *p) +{ + seq_printf(s, "0x%lx\n", gru_options); + return 0; +} + +static ssize_t options_write(struct file *file, const char __user *userbuf, + size_t count, loff_t *data) +{ + unsigned long val; + char buf[80]; + + if (copy_from_user + (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf))) + return -EFAULT; + if (!strict_strtoul(buf, 10, &val)) + gru_options = val; + + return count; +} + +static int cch_seq_show(struct seq_file *file, void *data) +{ + long gid = *(long *)data; + int i; + struct gru_state *gru = GID_TO_GRU(gid); + struct gru_thread_state *ts; + const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" }; + + if (gid == 0) + seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid", + "ctx#", "pid", "cbrs", "dsbytes", "mode"); + if (gru) + for (i = 0; i < GRU_NUM_CCH; i++) { + ts = gru->gs_gts[i]; + if (!ts) + continue; + seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n", + gru->gs_gid, gru->gs_blade_id, i, + ts->ts_tgid_owner, + ts->ts_cbr_au_count * GRU_CBR_AU_SIZE, + ts->ts_cbr_au_count * GRU_DSR_AU_BYTES, + mode[ts->ts_user_options & + GRU_OPT_MISS_MASK]); + } + + return 0; +} + +static int gru_seq_show(struct seq_file *file, void *data) +{ + long gid = *(long *)data, ctxfree, cbrfree, dsrfree; + struct gru_state *gru = GID_TO_GRU(gid); + + if (gid == 0) { + seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid", + "ctx", "cbr", "dsr", "ctx", "cbr", "dsr"); + seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy", + "busy", "busy", "free", "free", "free"); + } + if (gru) { + ctxfree = GRU_NUM_CCH - gru->gs_active_contexts; + cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES; + seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n", + gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree, + GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree, + ctxfree, cbrfree, dsrfree); + } + + return 0; +} + +static void seq_stop(struct seq_file *file, void *data) +{ +} + +static void *seq_start(struct seq_file *file, loff_t *gid) +{ + if (*gid < GRU_MAX_GRUS) + return gid; + return NULL; +} + +static void *seq_next(struct seq_file *file, void *data, loff_t *gid) +{ + (*gid)++; + if (*gid < GRU_MAX_GRUS) + return gid; + return NULL; +} + +static const struct seq_operations cch_seq_ops = { + .start = seq_start, + .next = seq_next, + .stop = seq_stop, + .show = cch_seq_show +}; + +static const struct seq_operations gru_seq_ops = { + .start = seq_start, + .next = seq_next, + .stop = seq_stop, + .show = gru_seq_show +}; + +static int statistics_open(struct inode *inode, struct file *file) +{ + return single_open(file, statistics_show, NULL); +} + +static int options_open(struct inode *inode, struct file *file) +{ + return single_open(file, options_show, NULL); +} + +static int cch_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &cch_seq_ops); +} + +static int gru_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &gru_seq_ops); +} + +/* *INDENT-OFF* */ +static const struct file_operations statistics_fops = { + .open = statistics_open, + .read = seq_read, + .write = statistics_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations options_fops = { + .open = options_open, + .read = seq_read, + .write = options_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations cch_fops = { + .open = cch_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +static const struct file_operations gru_fops = { + .open = gru_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static struct proc_entry { + char *name; + int mode; + const struct file_operations *fops; + struct proc_dir_entry *entry; +} proc_files[] = { + {"statistics", 0644, &statistics_fops}, + {"debug_options", 0644, &options_fops}, + {"cch_status", 0444, &cch_fops}, + {"gru_status", 0444, &gru_fops}, + {NULL} +}; +/* *INDENT-ON* */ + +static struct proc_dir_entry *proc_gru __read_mostly; + +static int create_proc_file(struct proc_entry *p) +{ + p->entry = create_proc_entry(p->name, p->mode, proc_gru); + if (!p->entry) + return -1; + p->entry->proc_fops = p->fops; + return 0; +} + +static void delete_proc_files(void) +{ + struct proc_entry *p; + + if (proc_gru) { + for (p = proc_files; p->name; p++) + if (p->entry) + remove_proc_entry(p->name, proc_gru); + remove_proc_entry("gru", NULL); + } +} + +int gru_proc_init(void) +{ + struct proc_entry *p; + + proc_mkdir("sgi_uv", NULL); + proc_gru = proc_mkdir("sgi_uv/gru", NULL); + + for (p = proc_files; p->name; p++) + if (create_proc_file(p)) + goto err; + return 0; + +err: + delete_proc_files(); + return -1; +} + +void gru_proc_exit(void) +{ + delete_proc_files(); +} diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h new file mode 100644 index 000000000000..4251018f70ff --- /dev/null +++ b/drivers/misc/sgi-gru/grutables.h @@ -0,0 +1,609 @@ +/* + * SN Platform GRU Driver + * + * GRU DRIVER TABLES, MACROS, externs, etc + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRUTABLES_H__ +#define __GRUTABLES_H__ + +/* + * GRU Chiplet: + * The GRU is a user addressible memory accelerator. It provides + * several forms of load, store, memset, bcopy instructions. In addition, it + * contains special instructions for AMOs, sending messages to message + * queues, etc. + * + * The GRU is an integral part of the node controller. It connects + * directly to the cpu socket. In its current implementation, there are 2 + * GRU chiplets in the node controller on each blade (~node). + * + * The entire GRU memory space is fully coherent and cacheable by the cpus. + * + * Each GRU chiplet has a physical memory map that looks like the following: + * + * +-----------------+ + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * +-----------------+ + * | system control | + * +-----------------+ _______ +-------------+ + * |/////////////////| / | | + * |/////////////////| / | | + * |/////////////////| / | instructions| + * |/////////////////| / | | + * |/////////////////| / | | + * |/////////////////| / |-------------| + * |/////////////////| / | | + * +-----------------+ | | + * | context 15 | | data | + * +-----------------+ | | + * | ...... | \ | | + * +-----------------+ \____________ +-------------+ + * | context 1 | + * +-----------------+ + * | context 0 | + * +-----------------+ + * + * Each of the "contexts" is a chunk of memory that can be mmaped into user + * space. The context consists of 2 parts: + * + * - an instruction space that can be directly accessed by the user + * to issue GRU instructions and to check instruction status. + * + * - a data area that acts as normal RAM. + * + * User instructions contain virtual addresses of data to be accessed by the + * GRU. The GRU contains a TLB that is used to convert these user virtual + * addresses to physical addresses. + * + * The "system control" area of the GRU chiplet is used by the kernel driver + * to manage user contexts and to perform functions such as TLB dropin and + * purging. + * + * One context may be reserved for the kernel and used for cross-partition + * communication. The GRU will also be used to asynchronously zero out + * large blocks of memory (not currently implemented). + * + * + * Tables: + * + * VDATA-VMA Data - Holds a few parameters. Head of linked list of + * GTS tables for threads using the GSEG + * GTS - Gru Thread State - contains info for managing a GSEG context. A + * GTS is allocated for each thread accessing a + * GSEG. + * GTD - GRU Thread Data - contains shadow copy of GRU data when GSEG is + * not loaded into a GRU + * GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs + * where a GSEG has been loaded. Similar to + * an mm_struct but for GRU. + * + * GS - GRU State - Used to manage the state of a GRU chiplet + * BS - Blade State - Used to manage state of all GRU chiplets + * on a blade + * + * + * Normal task tables for task using GRU. + * - 2 threads in process + * - 2 GSEGs open in process + * - GSEG1 is being used by both threads + * - GSEG2 is used only by thread 2 + * + * task -->| + * task ---+---> mm ->------ (notifier) -------+-> gms + * | | + * |--> vma -> vdata ---> gts--->| GSEG1 (thread1) + * | | | + * | +-> gts--->| GSEG1 (thread2) + * | | + * |--> vma -> vdata ---> gts--->| GSEG2 (thread2) + * . + * . + * + * GSEGs are marked DONTCOPY on fork + * + * At open + * file.private_data -> NULL + * + * At mmap, + * vma -> vdata + * + * After gseg reference + * vma -> vdata ->gts + * + * After fork + * parent + * vma -> vdata -> gts + * child + * (vma is not copied) + * + */ + +#include <linux/rmap.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/wait.h> +#include <linux/mmu_notifier.h> +#include "gru.h" +#include "gruhandles.h" + +extern struct gru_stats_s gru_stats; +extern struct gru_blade_state *gru_base[]; +extern unsigned long gru_start_paddr, gru_end_paddr; + +#define GRU_MAX_BLADES MAX_NUMNODES +#define GRU_MAX_GRUS (GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE) + +#define GRU_DRIVER_ID_STR "SGI GRU Device Driver" +#define GRU_DRIVER_VERSION_STR "0.80" + +/* + * GRU statistics. + */ +struct gru_stats_s { + atomic_long_t vdata_alloc; + atomic_long_t vdata_free; + atomic_long_t gts_alloc; + atomic_long_t gts_free; + atomic_long_t vdata_double_alloc; + atomic_long_t gts_double_allocate; + atomic_long_t assign_context; + atomic_long_t assign_context_failed; + atomic_long_t free_context; + atomic_long_t load_context; + atomic_long_t unload_context; + atomic_long_t steal_context; + atomic_long_t steal_context_failed; + atomic_long_t nopfn; + atomic_long_t break_cow; + atomic_long_t asid_new; + atomic_long_t asid_next; + atomic_long_t asid_wrap; + atomic_long_t asid_reuse; + atomic_long_t intr; + atomic_long_t call_os; + atomic_long_t call_os_check_for_bug; + atomic_long_t call_os_wait_queue; + atomic_long_t user_flush_tlb; + atomic_long_t user_unload_context; + atomic_long_t user_exception; + atomic_long_t set_task_slice; + atomic_long_t migrate_check; + atomic_long_t migrated_retarget; + atomic_long_t migrated_unload; + atomic_long_t migrated_unload_delay; + atomic_long_t migrated_nopfn_retarget; + atomic_long_t migrated_nopfn_unload; + atomic_long_t tlb_dropin; + atomic_long_t tlb_dropin_fail_no_asid; + atomic_long_t tlb_dropin_fail_upm; + atomic_long_t tlb_dropin_fail_invalid; + atomic_long_t tlb_dropin_fail_range_active; + atomic_long_t tlb_dropin_fail_idle; + atomic_long_t tlb_dropin_fail_fmm; + atomic_long_t mmu_invalidate_range; + atomic_long_t mmu_invalidate_page; + atomic_long_t mmu_clear_flush_young; + atomic_long_t flush_tlb; + atomic_long_t flush_tlb_gru; + atomic_long_t flush_tlb_gru_tgh; + atomic_long_t flush_tlb_gru_zero_asid; + + atomic_long_t copy_gpa; + + atomic_long_t mesq_receive; + atomic_long_t mesq_receive_none; + atomic_long_t mesq_send; + atomic_long_t mesq_send_failed; + atomic_long_t mesq_noop; + atomic_long_t mesq_send_unexpected_error; + atomic_long_t mesq_send_lb_overflow; + atomic_long_t mesq_send_qlimit_reached; + atomic_long_t mesq_send_amo_nacked; + atomic_long_t mesq_send_put_nacked; + atomic_long_t mesq_qf_not_full; + atomic_long_t mesq_qf_locked; + atomic_long_t mesq_qf_noop_not_full; + atomic_long_t mesq_qf_switch_head_failed; + atomic_long_t mesq_qf_unexpected_error; + atomic_long_t mesq_noop_unexpected_error; + atomic_long_t mesq_noop_lb_overflow; + atomic_long_t mesq_noop_qlimit_reached; + atomic_long_t mesq_noop_amo_nacked; + atomic_long_t mesq_noop_put_nacked; + +}; + +#define OPT_DPRINT 1 +#define OPT_STATS 2 +#define GRU_QUICKLOOK 4 + + +#define IRQ_GRU 110 /* Starting IRQ number for interrupts */ + +/* Delay in jiffies between attempts to assign a GRU context */ +#define GRU_ASSIGN_DELAY ((HZ * 20) / 1000) + +/* + * If a process has it's context stolen, min delay in jiffies before trying to + * steal a context from another process. + */ +#define GRU_STEAL_DELAY ((HZ * 200) / 1000) + +#define STAT(id) do { \ + if (gru_options & OPT_STATS) \ + atomic_long_inc(&gru_stats.id); \ + } while (0) + +#ifdef CONFIG_SGI_GRU_DEBUG +#define gru_dbg(dev, fmt, x...) \ + do { \ + if (gru_options & OPT_DPRINT) \ + dev_dbg(dev, "%s: " fmt, __func__, x); \ + } while (0) +#else +#define gru_dbg(x...) +#endif + +/*----------------------------------------------------------------------------- + * ASID management + */ +#define MAX_ASID 0xfffff0 +#define MIN_ASID 8 +#define ASID_INC 8 /* number of regions */ + +/* Generate a GRU asid value from a GRU base asid & a virtual address. */ +#if defined CONFIG_IA64 +#define VADDR_HI_BIT 64 +#define GRUREGION(addr) ((addr) >> (VADDR_HI_BIT - 3) & 3) +#elif defined __x86_64 +#define VADDR_HI_BIT 48 +#define GRUREGION(addr) (0) /* ZZZ could do better */ +#else +#error "Unsupported architecture" +#endif +#define GRUASID(asid, addr) ((asid) + GRUREGION(addr)) + +/*------------------------------------------------------------------------------ + * File & VMS Tables + */ + +struct gru_state; + +/* + * This structure is pointed to from the mmstruct via the notifier pointer. + * There is one of these per address space. + */ +struct gru_mm_tracker { + unsigned int mt_asid_gen; /* ASID wrap count */ + int mt_asid; /* current base ASID for gru */ + unsigned short mt_ctxbitmap; /* bitmap of contexts using + asid */ +}; + +struct gru_mm_struct { + struct mmu_notifier ms_notifier; + atomic_t ms_refcnt; + spinlock_t ms_asid_lock; /* protects ASID assignment */ + atomic_t ms_range_active;/* num range_invals active */ + char ms_released; + wait_queue_head_t ms_wait_queue; + DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS); + struct gru_mm_tracker ms_asids[GRU_MAX_GRUS]; +}; + +/* + * One of these structures is allocated when a GSEG is mmaped. The + * structure is pointed to by the vma->vm_private_data field in the vma struct. + */ +struct gru_vma_data { + spinlock_t vd_lock; /* Serialize access to vma */ + struct list_head vd_head; /* head of linked list of gts */ + long vd_user_options;/* misc user option flags */ + int vd_cbr_au_count; + int vd_dsr_au_count; +}; + +/* + * One of these is allocated for each thread accessing a mmaped GRU. A linked + * list of these structure is hung off the struct gru_vma_data in the mm_struct. + */ +struct gru_thread_state { + struct list_head ts_next; /* list - head at vma-private */ + struct mutex ts_ctxlock; /* load/unload CTX lock */ + struct mm_struct *ts_mm; /* mm currently mapped to + context */ + struct vm_area_struct *ts_vma; /* vma of GRU context */ + struct gru_state *ts_gru; /* GRU where the context is + loaded */ + struct gru_mm_struct *ts_gms; /* asid & ioproc struct */ + unsigned long ts_cbr_map; /* map of allocated CBRs */ + unsigned long ts_dsr_map; /* map of allocated DATA + resources */ + unsigned long ts_steal_jiffies;/* jiffies when context last + stolen */ + long ts_user_options;/* misc user option flags */ + pid_t ts_tgid_owner; /* task that is using the + context - for migration */ + int ts_tsid; /* thread that owns the + structure */ + int ts_tlb_int_select;/* target cpu if interrupts + enabled */ + int ts_ctxnum; /* context number where the + context is loaded */ + atomic_t ts_refcnt; /* reference count GTS */ + unsigned char ts_dsr_au_count;/* Number of DSR resources + required for contest */ + unsigned char ts_cbr_au_count;/* Number of CBR resources + required for contest */ + char ts_force_unload;/* force context to be unloaded + after migration */ + char ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each + allocated CB */ + unsigned long ts_gdata[0]; /* save area for GRU data (CB, + DS, CBE) */ +}; + +/* + * Threaded programs actually allocate an array of GSEGs when a context is + * created. Each thread uses a separate GSEG. TSID is the index into the GSEG + * array. + */ +#define TSID(a, v) (((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE) +#define UGRUADDR(gts) ((gts)->ts_vma->vm_start + \ + (gts)->ts_tsid * GRU_GSEG_PAGESIZE) + +#define NULLCTX (-1) /* if context not loaded into GRU */ + +/*----------------------------------------------------------------------------- + * GRU State Tables + */ + +/* + * One of these exists for each GRU chiplet. + */ +struct gru_state { + struct gru_blade_state *gs_blade; /* GRU state for entire + blade */ + unsigned long gs_gru_base_paddr; /* Physical address of + gru segments (64) */ + void *gs_gru_base_vaddr; /* Virtual address of + gru segments (64) */ + unsigned char gs_gid; /* unique GRU number */ + unsigned char gs_tgh_local_shift; /* used to pick TGH for + local flush */ + unsigned char gs_tgh_first_remote; /* starting TGH# for + remote flush */ + unsigned short gs_blade_id; /* blade of GRU */ + spinlock_t gs_asid_lock; /* lock used for + assigning asids */ + spinlock_t gs_lock; /* lock used for + assigning contexts */ + + /* -- the following are protected by the gs_asid_lock spinlock ---- */ + unsigned int gs_asid; /* Next availe ASID */ + unsigned int gs_asid_limit; /* Limit of available + ASIDs */ + unsigned int gs_asid_gen; /* asid generation. + Inc on wrap */ + + /* --- the following fields are protected by the gs_lock spinlock --- */ + unsigned long gs_context_map; /* bitmap to manage + contexts in use */ + unsigned long gs_cbr_map; /* bitmap to manage CB + resources */ + unsigned long gs_dsr_map; /* bitmap used to manage + DATA resources */ + unsigned int gs_reserved_cbrs; /* Number of kernel- + reserved cbrs */ + unsigned int gs_reserved_dsr_bytes; /* Bytes of kernel- + reserved dsrs */ + unsigned short gs_active_contexts; /* number of contexts + in use */ + struct gru_thread_state *gs_gts[GRU_NUM_CCH]; /* GTS currently using + the context */ +}; + +/* + * This structure contains the GRU state for all the GRUs on a blade. + */ +struct gru_blade_state { + void *kernel_cb; /* First kernel + reserved cb */ + void *kernel_dsr; /* First kernel + reserved DSR */ + /* ---- the following are protected by the bs_lock spinlock ---- */ + spinlock_t bs_lock; /* lock used for + stealing contexts */ + int bs_lru_ctxnum; /* STEAL - last context + stolen */ + struct gru_state *bs_lru_gru; /* STEAL - last gru + stolen */ + + struct gru_state bs_grus[GRU_CHIPLETS_PER_BLADE]; +}; + +/*----------------------------------------------------------------------------- + * Address Primitives + */ +#define get_tfm_for_cpu(g, c) \ + ((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c))) +#define get_tfh_by_index(g, i) \ + ((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i))) +#define get_tgh_by_index(g, i) \ + ((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i))) +#define get_cbe_by_index(g, i) \ + ((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\ + (i))) + +/*----------------------------------------------------------------------------- + * Useful Macros + */ + +/* Given a blade# & chiplet#, get a pointer to the GRU */ +#define get_gru(b, c) (&gru_base[b]->bs_grus[c]) + +/* Number of bytes to save/restore when unloading/loading GRU contexts */ +#define DSR_BYTES(dsr) ((dsr) * GRU_DSR_AU_BYTES) +#define CBR_BYTES(cbr) ((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2) + +/* Convert a user CB number to the actual CBRNUM */ +#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \ + * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE) + +/* Convert a gid to a pointer to the GRU */ +#define GID_TO_GRU(gid) \ + (gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ? \ + (&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]-> \ + bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) : \ + NULL) + +/* Scan all active GRUs in a GRU bitmap */ +#define for_each_gru_in_bitmap(gid, map) \ + for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\ + (gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid))) + +/* Scan all active GRUs on a specific blade */ +#define for_each_gru_on_blade(gru, nid, i) \ + for ((gru) = gru_base[nid]->bs_grus, (i) = 0; \ + (i) < GRU_CHIPLETS_PER_BLADE; \ + (i)++, (gru)++) + +/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */ +#define for_each_gts_on_gru(gts, gru, ctxnum) \ + for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++) \ + if (((gts) = (gru)->gs_gts[ctxnum])) + +/* Scan each CBR whose bit is set in a TFM (or copy of) */ +#define for_each_cbr_in_tfm(i, map) \ + for ((i) = find_first_bit(map, GRU_NUM_CBE); \ + (i) < GRU_NUM_CBE; \ + (i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i)) + +/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */ +#define for_each_cbr_in_allocation_map(i, map, k) \ + for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU; \ + (k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) \ + for ((i) = (k)*GRU_CBR_AU_SIZE; \ + (i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++) + +/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */ +#define for_each_dsr_in_allocation_map(i, map, k) \ + for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\ + (k) < GRU_DSR_AU; \ + (k) = find_next_bit((const unsigned long *)map, \ + GRU_DSR_AU, (k) + 1)) \ + for ((i) = (k) * GRU_DSR_AU_CL; \ + (i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++) + +#define gseg_physical_address(gru, ctxnum) \ + ((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE) +#define gseg_virtual_address(gru, ctxnum) \ + ((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE) + +/*----------------------------------------------------------------------------- + * Lock / Unlock GRU handles + * Use the "delresp" bit in the handle as a "lock" bit. + */ + +/* Lock hierarchy checking enabled only in emulator */ + +static inline void __lock_handle(void *h) +{ + while (test_and_set_bit(1, h)) + cpu_relax(); +} + +static inline void __unlock_handle(void *h) +{ + clear_bit(1, h); +} + +static inline void lock_cch_handle(struct gru_context_configuration_handle *cch) +{ + __lock_handle(cch); +} + +static inline void unlock_cch_handle(struct gru_context_configuration_handle + *cch) +{ + __unlock_handle(cch); +} + +static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + __lock_handle(tgh); +} + +static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + __unlock_handle(tgh); +} + +/*----------------------------------------------------------------------------- + * Function prototypes & externs + */ +struct gru_unload_context_req; + +extern struct vm_operations_struct gru_vm_ops; +extern struct device *grudev; + +extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, + int tsid); +extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct + *vma, int tsid); +extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct + *vma, int tsid); +extern void gru_unload_context(struct gru_thread_state *gts, int savestate); +extern void gts_drop(struct gru_thread_state *gts); +extern void gru_tgh_flush_init(struct gru_state *gru); +extern int gru_kservices_init(struct gru_state *gru); +extern irqreturn_t gru_intr(int irq, void *dev_id); +extern int gru_handle_user_call_os(unsigned long address); +extern int gru_user_flush_tlb(unsigned long arg); +extern int gru_user_unload_context(unsigned long arg); +extern int gru_get_exception_detail(unsigned long arg); +extern int gru_set_task_slice(long address); +extern int gru_cpu_fault_map_id(void); +extern struct vm_area_struct *gru_find_vma(unsigned long vaddr); +extern void gru_flush_all_tlb(struct gru_state *gru); +extern int gru_proc_init(void); +extern void gru_proc_exit(void); + +extern unsigned long gru_reserve_cb_resources(struct gru_state *gru, + int cbr_au_count, char *cbmap); +extern unsigned long gru_reserve_ds_resources(struct gru_state *gru, + int dsr_au_count, char *dsmap); +extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf); +extern struct gru_mm_struct *gru_register_mmu_notifier(void); +extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms); + +extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start, + unsigned long len); + +extern unsigned long gru_options; + +#endif /* __GRUTABLES_H__ */ diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c new file mode 100644 index 000000000000..bcfd5425e2e6 --- /dev/null +++ b/drivers/misc/sgi-gru/grutlbpurge.c @@ -0,0 +1,372 @@ +/* + * SN Platform GRU Driver + * + * MMUOPS callbacks + TLB flushing + * + * This file handles emu notifier callbacks from the core kernel. The callbacks + * are used to update the TLB in the GRU as a result of changes in the + * state of a process address space. This file also handles TLB invalidates + * from the GRU driver. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/hugetlb.h> +#include <linux/delay.h> +#include <linux/timex.h> +#include <linux/delay.h> +#include <linux/srcu.h> +#include <asm/processor.h> +#include "gru.h" +#include "grutables.h" +#include <asm/uv/uv_hub.h> + +#define gru_random() get_cycles() + +/* ---------------------------------- TLB Invalidation functions -------- + * get_tgh_handle + * + * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the + * local blade, use a fixed TGH that is a function of the blade-local cpu + * number. Normally, this TGH is private to the cpu & no contention occurs for + * the TGH. For offblade GRUs, select a random TGH in the range above the + * private TGHs. A spinlock is required to access this TGH & the lock must be + * released when the invalidate is completes. This sucks, but it is the best we + * can do. + * + * Note that the spinlock is IN the TGH handle so locking does not involve + * additional cache lines. + * + */ +static inline int get_off_blade_tgh(struct gru_state *gru) +{ + int n; + + n = GRU_NUM_TGH - gru->gs_tgh_first_remote; + n = gru_random() % n; + n += gru->gs_tgh_first_remote; + return n; +} + +static inline int get_on_blade_tgh(struct gru_state *gru) +{ + return uv_blade_processor_id() >> gru->gs_tgh_local_shift; +} + +static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state + *gru) +{ + struct gru_tlb_global_handle *tgh; + int n; + + preempt_disable(); + if (uv_numa_blade_id() == gru->gs_blade_id) + n = get_on_blade_tgh(gru); + else + n = get_off_blade_tgh(gru); + tgh = get_tgh_by_index(gru, n); + lock_tgh_handle(tgh); + + return tgh; +} + +static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + unlock_tgh_handle(tgh); + preempt_enable(); +} + +/* + * gru_flush_tlb_range + * + * General purpose TLB invalidation function. This function scans every GRU in + * the ENTIRE system (partition) looking for GRUs where the specified MM has + * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR + * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned + * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the + * cost of (possibly) a large number of future TLBmisses. + * + * The current algorithm is optimized based on the following (somewhat true) + * assumptions: + * - GRU contexts are not loaded into a GRU unless a reference is made to + * the data segment or control block (this is true, not an assumption). + * If a DS/CB is referenced, the user will also issue instructions that + * cause TLBmisses. It is not necessary to optimize for the case where + * contexts are loaded but no instructions cause TLB misses. (I know + * this will happen but I'm not optimizing for it). + * - GRU instructions to invalidate TLB entries are SLOOOOWWW - normally + * a few usec but in unusual cases, it could be longer. Avoid if + * possible. + * - intrablade process migration between cpus is not frequent but is + * common. + * - a GRU context is not typically migrated to a different GRU on the + * blade because of intrablade migration + * - interblade migration is rare. Processes migrate their GRU context to + * the new blade. + * - if interblade migration occurs, migration back to the original blade + * is very very rare (ie., no optimization for this case) + * - most GRU instruction operate on a subset of the user REGIONS. Code + * & shared library regions are not likely targets of GRU instructions. + * + * To help improve the efficiency of TLB invalidation, the GMS data + * structure is maintained for EACH address space (MM struct). The GMS is + * also the structure that contains the pointer to the mmu callout + * functions. This structure is linked to the mm_struct for the address space + * using the mmu "register" function. The mmu interfaces are used to + * provide the callbacks for TLB invalidation. The GMS contains: + * + * - asid[maxgrus] array. ASIDs are assigned to a GRU when a context is + * loaded into the GRU. + * - asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in + * the above array + * - ctxbitmap[maxgrus]. Indicates the contexts that are currently active + * in the GRU for the address space. This bitmap must be passed to the + * GRU to do an invalidate. + * + * The current algorithm for invalidating TLBs is: + * - scan the asidmap for GRUs where the context has been loaded, ie, + * asid is non-zero. + * - for each gru found: + * - if the ctxtmap is non-zero, there are active contexts in the + * GRU. TLB invalidate instructions must be issued to the GRU. + * - if the ctxtmap is zero, no context is active. Set the ASID to + * zero to force a full TLB invalidation. This is fast but will + * cause a lot of TLB misses if the context is reloaded onto the + * GRU + * + */ + +void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start, + unsigned long len) +{ + struct gru_state *gru; + struct gru_mm_tracker *asids; + struct gru_tlb_global_handle *tgh; + unsigned long num; + int grupagesize, pagesize, pageshift, gid, asid; + + /* ZZZ TODO - handle huge pages */ + pageshift = PAGE_SHIFT; + pagesize = (1UL << pageshift); + grupagesize = GRU_PAGESIZE(pageshift); + num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL); + + STAT(flush_tlb); + gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms, + start, len, gms->ms_asidmap[0]); + + spin_lock(&gms->ms_asid_lock); + for_each_gru_in_bitmap(gid, gms->ms_asidmap) { + STAT(flush_tlb_gru); + gru = GID_TO_GRU(gid); + asids = gms->ms_asids + gid; + asid = asids->mt_asid; + if (asids->mt_ctxbitmap && asid) { + STAT(flush_tlb_gru_tgh); + asid = GRUASID(asid, start); + gru_dbg(grudev, + " FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n", + gid, asid, num, asids->mt_ctxbitmap); + tgh = get_lock_tgh_handle(gru); + tgh_invalidate(tgh, start, 0, asid, grupagesize, 0, + num - 1, asids->mt_ctxbitmap); + get_unlock_tgh_handle(tgh); + } else { + STAT(flush_tlb_gru_zero_asid); + asids->mt_asid = 0; + __clear_bit(gru->gs_gid, gms->ms_asidmap); + gru_dbg(grudev, + " CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n", + gid, asid, asids->mt_ctxbitmap, + gms->ms_asidmap[0]); + } + } + spin_unlock(&gms->ms_asid_lock); +} + +/* + * Flush the entire TLB on a chiplet. + */ +void gru_flush_all_tlb(struct gru_state *gru) +{ + struct gru_tlb_global_handle *tgh; + + gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid); + tgh = get_lock_tgh_handle(gru); + tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0); + get_unlock_tgh_handle(tgh); + preempt_enable(); +} + +/* + * MMUOPS notifier callout functions + */ +static void gru_invalidate_range_start(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + STAT(mmu_invalidate_range); + atomic_inc(&gms->ms_range_active); + gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms, + start, end, atomic_read(&gms->ms_range_active)); + gru_flush_tlb_range(gms, start, end - start); +} + +static void gru_invalidate_range_end(struct mmu_notifier *mn, + struct mm_struct *mm, unsigned long start, + unsigned long end) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + /* ..._and_test() provides needed barrier */ + (void)atomic_dec_and_test(&gms->ms_range_active); + + wake_up_all(&gms->ms_wait_queue); + gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end); +} + +static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm, + unsigned long address) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + STAT(mmu_invalidate_page); + gru_flush_tlb_range(gms, address, PAGE_SIZE); + gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address); +} + +static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + gms->ms_released = 1; + gru_dbg(grudev, "gms %p\n", gms); +} + + +static const struct mmu_notifier_ops gru_mmuops = { + .invalidate_page = gru_invalidate_page, + .invalidate_range_start = gru_invalidate_range_start, + .invalidate_range_end = gru_invalidate_range_end, + .release = gru_release, +}; + +/* Move this to the basic mmu_notifier file. But for now... */ +static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm, + const struct mmu_notifier_ops *ops) +{ + struct mmu_notifier *mn, *gru_mn = NULL; + struct hlist_node *n; + + if (mm->mmu_notifier_mm) { + rcu_read_lock(); + hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, + hlist) + if (mn->ops == ops) { + gru_mn = mn; + break; + } + rcu_read_unlock(); + } + return gru_mn; +} + +struct gru_mm_struct *gru_register_mmu_notifier(void) +{ + struct gru_mm_struct *gms; + struct mmu_notifier *mn; + + mn = mmu_find_ops(current->mm, &gru_mmuops); + if (mn) { + gms = container_of(mn, struct gru_mm_struct, ms_notifier); + atomic_inc(&gms->ms_refcnt); + } else { + gms = kzalloc(sizeof(*gms), GFP_KERNEL); + if (gms) { + spin_lock_init(&gms->ms_asid_lock); + gms->ms_notifier.ops = &gru_mmuops; + atomic_set(&gms->ms_refcnt, 1); + init_waitqueue_head(&gms->ms_wait_queue); + __mmu_notifier_register(&gms->ms_notifier, current->mm); + } + } + gru_dbg(grudev, "gms %p, refcnt %d\n", gms, + atomic_read(&gms->ms_refcnt)); + return gms; +} + +void gru_drop_mmu_notifier(struct gru_mm_struct *gms) +{ + gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms, + atomic_read(&gms->ms_refcnt), gms->ms_released); + if (atomic_dec_return(&gms->ms_refcnt) == 0) { + if (!gms->ms_released) + mmu_notifier_unregister(&gms->ms_notifier, current->mm); + kfree(gms); + } +} + +/* + * Setup TGH parameters. There are: + * - 24 TGH handles per GRU chiplet + * - a portion (MAX_LOCAL_TGH) of the handles are reserved for + * use by blade-local cpus + * - the rest are used by off-blade cpus. This usage is + * less frequent than blade-local usage. + * + * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade + * has less tan or equal to 16 cpus, each cpu has a unique handle that it can + * use. + */ +#define MAX_LOCAL_TGH 16 + +void gru_tgh_flush_init(struct gru_state *gru) +{ + int cpus, shift = 0, n; + + cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id); + + /* n = cpus rounded up to next power of 2 */ + if (cpus) { + n = 1 << fls(cpus - 1); + + /* + * shift count for converting local cpu# to TGH index + * 0 if cpus <= MAX_LOCAL_TGH, + * 1 if cpus <= 2*MAX_LOCAL_TGH, + * etc + */ + shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1)); + } + gru->gs_tgh_local_shift = shift; + + /* first starting TGH index to use for remote purges */ + gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift; + +} diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index b6e40a7958ce..35ce28578075 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -3,9 +3,17 @@ # obj-$(CONFIG_SGI_XP) += xp.o -xp-y := xp_main.o xp_nofault.o +xp-y := xp_main.o +xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o +xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o +xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o +xp-$(CONFIG_X86_64) += xp_uv.o obj-$(CONFIG_SGI_XP) += xpc.o xpc-y := xpc_main.o xpc_channel.o xpc_partition.o +xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o +xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o +xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o +xpc-$(CONFIG_X86_64) += xpc_uv.o obj-$(CONFIG_SGI_XP) += xpnet.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 03a87a307e32..859a5281c61b 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -13,11 +13,34 @@ #ifndef _DRIVERS_MISC_SGIXP_XP_H #define _DRIVERS_MISC_SGIXP_XP_H -#include <linux/cache.h> -#include <linux/hardirq.h> #include <linux/mutex.h> -#include <asm/sn/types.h> -#include <asm/sn/bte.h> + +#ifdef CONFIG_IA64 +#include <asm/system.h> +#include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ +#define is_shub() ia64_platform_is("sn2") +#define is_uv() ia64_platform_is("uv") +#endif +#ifdef CONFIG_X86_64 +#include <asm/genapic.h> +#define is_uv() is_uv_system() +#endif + +#ifndef is_shub1 +#define is_shub1() 0 +#endif + +#ifndef is_shub2 +#define is_shub2() 0 +#endif + +#ifndef is_shub +#define is_shub() 0 +#endif + +#ifndef is_uv +#define is_uv() 0 +#endif #ifdef USE_DBUG_ON #define DBUG_ON(condition) BUG_ON(condition) @@ -26,133 +49,56 @@ #endif /* - * Define the maximum number of logically defined partitions the system - * can support. It is constrained by the maximum number of hardware - * partitionable regions. The term 'region' in this context refers to the - * minimum number of nodes that can comprise an access protection grouping. - * The access protection is in regards to memory, IPI and IOI. + * Define the maximum number of partitions the system can possibly support. + * It is based on the maximum number of hardware partitionable regions. The + * term 'region' in this context refers to the minimum number of nodes that + * can comprise an access protection grouping. The access protection is in + * regards to memory, IPI and IOI. * * The maximum number of hardware partitionable regions is equal to the * maximum number of nodes in the entire system divided by the minimum number * of nodes that comprise an access protection grouping. */ -#define XP_MAX_PARTITIONS 64 - -/* - * Define the number of u64s required to represent all the C-brick nasids - * as a bitmap. The cross-partition kernel modules deal only with - * C-brick nasids, thus the need for bitmaps which don't account for - * odd-numbered (non C-brick) nasids. - */ -#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) -#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) -#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) - -/* - * Wrapper for bte_copy() that should it return a failure status will retry - * the bte_copy() once in the hope that the failure was due to a temporary - * aberration (i.e., the link going down temporarily). - * - * src - physical address of the source of the transfer. - * vdst - virtual address of the destination of the transfer. - * len - number of bytes to transfer from source to destination. - * mode - see bte_copy() for definition. - * notification - see bte_copy() for definition. - * - * Note: xp_bte_copy() should never be called while holding a spinlock. - */ -static inline bte_result_t -xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) -{ - bte_result_t ret; - u64 pdst = ia64_tpa(vdst); - - /* - * Ensure that the physically mapped memory is contiguous. - * - * We do this by ensuring that the memory is from region 7 only. - * If the need should arise to use memory from one of the other - * regions, then modify the BUG_ON() statement to ensure that the - * memory from that region is always physically contiguous. - */ - BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); - - ret = bte_copy(src, pdst, len, mode, notification); - if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { - if (!in_interrupt()) - cond_resched(); - - ret = bte_copy(src, pdst, len, mode, notification); - } - - return ret; -} +#define XP_MAX_NPARTITIONS_SN2 64 +#define XP_MAX_NPARTITIONS_UV 256 /* * XPC establishes channel connections between the local partition and any * other partition that is currently up. Over these channels, kernel-level * `users' can communicate with their counterparts on the other partitions. * - * The maxinum number of channels is limited to eight. For performance reasons, - * the internal cross partition structures require sixteen bytes per channel, - * and eight allows all of this interface-shared info to fit in one cache line. - * - * XPC_NCHANNELS reflects the total number of channels currently defined. * If the need for additional channels arises, one can simply increase - * XPC_NCHANNELS accordingly. If the day should come where that number - * exceeds the MAXIMUM number of channels allowed (eight), then one will need - * to make changes to the XPC code to allow for this. + * XPC_MAX_NCHANNELS accordingly. If the day should come where that number + * exceeds the absolute MAXIMUM number of channels possible (eight), then one + * will need to make changes to the XPC code to accommodate for this. + * + * The absolute maximum number of channels possible is limited to eight for + * performance reasons on sn2 hardware. The internal cross partition structures + * require sixteen bytes per channel, and eight allows all of this + * interface-shared info to fit in one 128-byte cacheline. */ #define XPC_MEM_CHANNEL 0 /* memory channel number */ #define XPC_NET_CHANNEL 1 /* network channel number */ -#define XPC_NCHANNELS 2 /* #of defined channels */ -#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */ +#define XPC_MAX_NCHANNELS 2 /* max #of channels allowed */ -#if XPC_NCHANNELS > XPC_MAX_NCHANNELS -#error XPC_NCHANNELS exceeds MAXIMUM allowed. +#if XPC_MAX_NCHANNELS > 8 +#error XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible. #endif /* - * The format of an XPC message is as follows: - * - * +-------+--------------------------------+ - * | flags |////////////////////////////////| - * +-------+--------------------------------+ - * | message # | - * +----------------------------------------+ - * | payload (user-defined message) | - * | | - * : - * | | - * +----------------------------------------+ - * - * The size of the payload is defined by the user via xpc_connect(). A user- - * defined message resides in the payload area. - * - * The user should have no dealings with the message header, but only the - * message's payload. When a message entry is allocated (via xpc_allocate()) - * a pointer to the payload area is returned and not the actual beginning of - * the XPC message. The user then constructs a message in the payload area - * and passes that pointer as an argument on xpc_send() or xpc_send_notify(). - * - * The size of a message entry (within a message queue) must be a cacheline - * sized multiple in order to facilitate the BTE transfer of messages from one - * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user + * Define macro, XPC_MSG_SIZE(), is provided for the user * that wants to fit as many msg entries as possible in a given memory size * (e.g. a memory page). */ -struct xpc_msg { - u8 flags; /* FOR XPC INTERNAL USE ONLY */ - u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ - s64 number; /* FOR XPC INTERNAL USE ONLY */ - - u64 payload; /* user defined portion of message */ -}; +#define XPC_MSG_MAX_SIZE 128 +#define XPC_MSG_HDR_MAX_SIZE 16 +#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE) -#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload) #define XPC_MSG_SIZE(_payload_size) \ - L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size)) + ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \ + is_uv() ? 64 : 128) + /* * Define the return values and values passed to user's callout functions. @@ -233,8 +179,20 @@ enum xp_retval { xpDisconnected, /* 51: channel disconnected (closed) */ xpBteCopyError, /* 52: bte_copy() returned error */ + xpSalError, /* 53: sn SAL error */ + xpRsvdPageNotSet, /* 54: the reserved page is not set up */ + xpPayloadTooBig, /* 55: payload too large for message slot */ + + xpUnsupported, /* 56: unsupported functionality or resource */ + xpNeedMoreInfo, /* 57: more info is needed by SAL */ - xpUnknownReason /* 53: unknown reason - must be last in enum */ + xpGruCopyError, /* 58: gru_copy_gru() returned error */ + xpGruSendMqError, /* 59: gru send message queue related error */ + + xpBadChannelNumber, /* 60: invalid channel number */ + xpBadMsgType, /* 60: invalid message type */ + + xpUnknownReason /* 61: unknown reason - must be last in enum */ }; /* @@ -285,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid, * calling xpc_received(). * * All other reason codes indicate failure. + * + * NOTE: The user defined function must be callable by an interrupt handler + * and thus cannot block. */ typedef void (*xpc_notify_func) (enum xp_retval reason, short partid, int ch_number, void *key); @@ -308,23 +269,22 @@ struct xpc_registration { xpc_channel_func func; /* function to call */ void *key; /* pointer to user's key */ u16 nentries; /* #of msg entries in local msg queue */ - u16 msg_size; /* message queue's message size */ + u16 entry_size; /* message queue's message entry size */ u32 assigned_limit; /* limit on #of assigned kthreads */ u32 idle_limit; /* limit on #of idle kthreads */ } ____cacheline_aligned; #define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL) -/* the following are valid xpc_allocate() flags */ +/* the following are valid xpc_send() or xpc_send_notify() flags */ #define XPC_WAIT 0 /* wait flag */ #define XPC_NOWAIT 1 /* no wait flag */ struct xpc_interface { void (*connect) (int); void (*disconnect) (int); - enum xp_retval (*allocate) (short, int, u32, void **); - enum xp_retval (*send) (short, int, void *); - enum xp_retval (*send_notify) (short, int, void *, + enum xp_retval (*send) (short, int, u32, void *, u16); + enum xp_retval (*send_notify) (short, int, u32, void *, u16, xpc_notify_func, void *); void (*received) (short, int, void *); enum xp_retval (*partid_to_nasids) (short, void *); @@ -334,10 +294,9 @@ extern struct xpc_interface xpc_interface; extern void xpc_set_interface(void (*)(int), void (*)(int), - enum xp_retval (*)(short, int, u32, void **), - enum xp_retval (*)(short, int, void *), - enum xp_retval (*)(short, int, void *, - xpc_notify_func, void *), + enum xp_retval (*)(short, int, u32, void *, u16), + enum xp_retval (*)(short, int, u32, void *, u16, + xpc_notify_func, void *), void (*)(short, int, void *), enum xp_retval (*)(short, void *)); extern void xpc_clear_interface(void); @@ -347,22 +306,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16, extern void xpc_disconnect(int); static inline enum xp_retval -xpc_allocate(short partid, int ch_number, u32 flags, void **payload) -{ - return xpc_interface.allocate(partid, ch_number, flags, payload); -} - -static inline enum xp_retval -xpc_send(short partid, int ch_number, void *payload) +xpc_send(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size) { - return xpc_interface.send(partid, ch_number, payload); + return xpc_interface.send(partid, ch_number, flags, payload, + payload_size); } static inline enum xp_retval -xpc_send_notify(short partid, int ch_number, void *payload, - xpc_notify_func func, void *key) +xpc_send_notify(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size, xpc_notify_func func, void *key) { - return xpc_interface.send_notify(partid, ch_number, payload, func, key); + return xpc_interface.send_notify(partid, ch_number, flags, payload, + payload_size, func, key); } static inline void @@ -377,8 +333,23 @@ xpc_partid_to_nasids(short partid, void *nasids) return xpc_interface.partid_to_nasids(partid, nasids); } +extern short xp_max_npartitions; +extern short xp_partition_id; +extern u8 xp_region_size; + +extern unsigned long (*xp_pa) (void *); +extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long, + size_t); +extern int (*xp_cpu_to_nasid) (int); + extern u64 xp_nofault_PIOR_target; extern int xp_nofault_PIOR(void *); extern int xp_error_PIOR(void); +extern struct device *xp; +extern enum xp_retval xp_init_sn2(void); +extern enum xp_retval xp_init_uv(void); +extern void xp_exit_sn2(void); +extern void xp_exit_uv(void); + #endif /* _DRIVERS_MISC_SGIXP_XP_H */ diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 196480b691a1..66a1d19e08ad 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -14,29 +14,48 @@ * */ -#include <linux/kernel.h> -#include <linux/interrupt.h> #include <linux/module.h> -#include <linux/mutex.h> -#include <asm/sn/intr.h> -#include <asm/sn/sn_sal.h> +#include <linux/device.h> #include "xp.h" -/* - * The export of xp_nofault_PIOR needs to happen here since it is defined - * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is - * defined here. - */ -EXPORT_SYMBOL_GPL(xp_nofault_PIOR); +/* define the XP debug device structures to be used with dev_dbg() et al */ + +struct device_driver xp_dbg_name = { + .name = "xp" +}; + +struct device xp_dbg_subname = { + .bus_id = {0}, /* set to "" */ + .driver = &xp_dbg_name +}; + +struct device *xp = &xp_dbg_subname; + +/* max #of partitions possible */ +short xp_max_npartitions; +EXPORT_SYMBOL_GPL(xp_max_npartitions); + +short xp_partition_id; +EXPORT_SYMBOL_GPL(xp_partition_id); + +u8 xp_region_size; +EXPORT_SYMBOL_GPL(xp_region_size); + +unsigned long (*xp_pa) (void *addr); +EXPORT_SYMBOL_GPL(xp_pa); + +enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa, + const unsigned long src_gpa, size_t len); +EXPORT_SYMBOL_GPL(xp_remote_memcpy); -u64 xp_nofault_PIOR_target; -EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); +int (*xp_cpu_to_nasid) (int cpuid); +EXPORT_SYMBOL_GPL(xp_cpu_to_nasid); /* * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level * users of XPC. */ -struct xpc_registration xpc_registrations[XPC_NCHANNELS]; +struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS]; EXPORT_SYMBOL_GPL(xpc_registrations); /* @@ -51,10 +70,9 @@ xpc_notloaded(void) struct xpc_interface xpc_interface = { (void (*)(int))xpc_notloaded, (void (*)(int))xpc_notloaded, - (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded, - (enum xp_retval(*)(short, int, void *))xpc_notloaded, - (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *)) - xpc_notloaded, + (enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded, + (enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func, + void *))xpc_notloaded, (void (*)(short, int, void *))xpc_notloaded, (enum xp_retval(*)(short, void *))xpc_notloaded }; @@ -66,16 +84,14 @@ EXPORT_SYMBOL_GPL(xpc_interface); void xpc_set_interface(void (*connect) (int), void (*disconnect) (int), - enum xp_retval (*allocate) (short, int, u32, void **), - enum xp_retval (*send) (short, int, void *), - enum xp_retval (*send_notify) (short, int, void *, + enum xp_retval (*send) (short, int, u32, void *, u16), + enum xp_retval (*send_notify) (short, int, u32, void *, u16, xpc_notify_func, void *), void (*received) (short, int, void *), enum xp_retval (*partid_to_nasids) (short, void *)) { xpc_interface.connect = connect; xpc_interface.disconnect = disconnect; - xpc_interface.allocate = allocate; xpc_interface.send = send; xpc_interface.send_notify = send_notify; xpc_interface.received = received; @@ -91,13 +107,11 @@ xpc_clear_interface(void) { xpc_interface.connect = (void (*)(int))xpc_notloaded; xpc_interface.disconnect = (void (*)(int))xpc_notloaded; - xpc_interface.allocate = (enum xp_retval(*)(short, int, u32, - void **))xpc_notloaded; - xpc_interface.send = (enum xp_retval(*)(short, int, void *)) + xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16)) xpc_notloaded; - xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *, - xpc_notify_func, - void *))xpc_notloaded; + xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *, + u16, xpc_notify_func, + void *))xpc_notloaded; xpc_interface.received = (void (*)(short, int, void *)) xpc_notloaded; xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *)) @@ -135,11 +149,14 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, { struct xpc_registration *registration; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); DBUG_ON(payload_size == 0 || nentries == 0); DBUG_ON(func == NULL); DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit); + if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE) + return xpPayloadTooBig; + registration = &xpc_registrations[ch_number]; if (mutex_lock_interruptible(®istration->mutex) != 0) @@ -152,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, } /* register the channel for connection */ - registration->msg_size = XPC_MSG_SIZE(payload_size); + registration->entry_size = XPC_MSG_SIZE(payload_size); registration->nentries = nentries; registration->assigned_limit = assigned_limit; registration->idle_limit = idle_limit; @@ -185,7 +202,7 @@ xpc_disconnect(int ch_number) { struct xpc_registration *registration; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); registration = &xpc_registrations[ch_number]; @@ -206,7 +223,7 @@ xpc_disconnect(int ch_number) registration->func = NULL; registration->key = NULL; registration->nentries = 0; - registration->msg_size = 0; + registration->entry_size = 0; registration->assigned_limit = 0; registration->idle_limit = 0; @@ -221,39 +238,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect); int __init xp_init(void) { - int ret, ch_number; - u64 func_addr = *(u64 *)xp_nofault_PIOR; - u64 err_func_addr = *(u64 *)xp_error_PIOR; - - if (!ia64_platform_is("sn2")) - return -ENODEV; + enum xp_retval ret; + int ch_number; - /* - * Register a nofault code region which performs a cross-partition - * PIO read. If the PIO read times out, the MCA handler will consume - * the error and return to a kernel-provided instruction to indicate - * an error. This PIO read exists because it is guaranteed to timeout - * if the destination is down (AMO operations do not timeout on at - * least some CPUs on Shubs <= v1.2, which unfortunately we have to - * work around). - */ - ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, - 1, 1); - if (ret != 0) { - printk(KERN_ERR "XP: can't register nofault code, error=%d\n", - ret); - } - /* - * Setup the nofault PIO read target. (There is no special reason why - * SH_IPI_ACCESS was selected.) - */ - if (is_shub2()) - xp_nofault_PIOR_target = SH2_IPI_ACCESS0; + if (is_shub()) + ret = xp_init_sn2(); + else if (is_uv()) + ret = xp_init_uv(); else - xp_nofault_PIOR_target = SH1_IPI_ACCESS; + ret = xpUnsupported; + + if (ret != xpSuccess) + return -ENODEV; /* initialize the connection registration mutex */ - for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++) + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) mutex_init(&xpc_registrations[ch_number].mutex); return 0; @@ -264,12 +263,10 @@ module_init(xp_init); void __exit xp_exit(void) { - u64 func_addr = *(u64 *)xp_nofault_PIOR; - u64 err_func_addr = *(u64 *)xp_error_PIOR; - - /* unregister the PIO read nofault code region */ - (void)sn_register_nofault_code(func_addr, err_func_addr, - err_func_addr, 1, 0); + if (is_shub()) + xp_exit_sn2(); + else if (is_uv()) + xp_exit_uv(); } module_exit(xp_exit); diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c new file mode 100644 index 000000000000..1440134caf31 --- /dev/null +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -0,0 +1,146 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition (XP) sn2-based functions. + * + * Architecture specific implementation of common functions. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <asm/sn/bte.h> +#include <asm/sn/sn_sal.h> +#include "xp.h" + +/* + * The export of xp_nofault_PIOR needs to happen here since it is defined + * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is + * defined here. + */ +EXPORT_SYMBOL_GPL(xp_nofault_PIOR); + +u64 xp_nofault_PIOR_target; +EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); + +/* + * Register a nofault code region which performs a cross-partition PIO read. + * If the PIO read times out, the MCA handler will consume the error and + * return to a kernel-provided instruction to indicate an error. This PIO read + * exists because it is guaranteed to timeout if the destination is down + * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2, + * which unfortunately we have to work around). + */ +static enum xp_retval +xp_register_nofault_code_sn2(void) +{ + int ret; + u64 func_addr; + u64 err_func_addr; + + func_addr = *(u64 *)xp_nofault_PIOR; + err_func_addr = *(u64 *)xp_error_PIOR; + ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, + 1, 1); + if (ret != 0) { + dev_err(xp, "can't register nofault code, error=%d\n", ret); + return xpSalError; + } + /* + * Setup the nofault PIO read target. (There is no special reason why + * SH_IPI_ACCESS was selected.) + */ + if (is_shub1()) + xp_nofault_PIOR_target = SH1_IPI_ACCESS; + else if (is_shub2()) + xp_nofault_PIOR_target = SH2_IPI_ACCESS0; + + return xpSuccess; +} + +static void +xp_unregister_nofault_code_sn2(void) +{ + u64 func_addr = *(u64 *)xp_nofault_PIOR; + u64 err_func_addr = *(u64 *)xp_error_PIOR; + + /* unregister the PIO read nofault code region */ + (void)sn_register_nofault_code(func_addr, err_func_addr, + err_func_addr, 1, 0); +} + +/* + * Convert a virtual memory address to a physical memory address. + */ +static unsigned long +xp_pa_sn2(void *addr) +{ + return __pa(addr); +} + +/* + * Wrapper for bte_copy(). + * + * dst_pa - physical address of the destination of the transfer. + * src_pa - physical address of the source of the transfer. + * len - number of bytes to transfer from source to destination. + * + * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock. + */ +static enum xp_retval +xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa, + size_t len) +{ + bte_result_t ret; + + ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (ret == BTE_SUCCESS) + return xpSuccess; + + if (is_shub2()) { + dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa=" + "0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa, + src_pa, len); + } else { + dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx " + "src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len); + } + + return xpBteCopyError; +} + +static int +xp_cpu_to_nasid_sn2(int cpuid) +{ + return cpuid_to_nasid(cpuid); +} + +enum xp_retval +xp_init_sn2(void) +{ + BUG_ON(!is_shub()); + + xp_max_npartitions = XP_MAX_NPARTITIONS_SN2; + xp_partition_id = sn_partition_id; + xp_region_size = sn_region_size; + + xp_pa = xp_pa_sn2; + xp_remote_memcpy = xp_remote_memcpy_sn2; + xp_cpu_to_nasid = xp_cpu_to_nasid_sn2; + + return xp_register_nofault_code_sn2(); +} + +void +xp_exit_sn2(void) +{ + BUG_ON(!is_shub()); + + xp_unregister_nofault_code_sn2(); +} + diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c new file mode 100644 index 000000000000..d9f7ce2510bc --- /dev/null +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition (XP) uv-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include <linux/device.h> +#include <asm/uv/uv_hub.h> +#include "../sgi-gru/grukservices.h" +#include "xp.h" + +/* + * Convert a virtual memory address to a physical memory address. + */ +static unsigned long +xp_pa_uv(void *addr) +{ + return uv_gpa(addr); +} + +static enum xp_retval +xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa, + size_t len) +{ + int ret; + + ret = gru_copy_gpa(dst_gpa, src_gpa, len); + if (ret == 0) + return xpSuccess; + + dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx " + "len=%ld\n", dst_gpa, src_gpa, len); + return xpGruCopyError; +} + +static int +xp_cpu_to_nasid_uv(int cpuid) +{ + /* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */ + return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid)); +} + +enum xp_retval +xp_init_uv(void) +{ + BUG_ON(!is_uv()); + + xp_max_npartitions = XP_MAX_NPARTITIONS_UV; + xp_partition_id = 0; /* !!! not correct value */ + xp_region_size = 0; /* !!! not correct value */ + + xp_pa = xp_pa_uv; + xp_remote_memcpy = xp_remote_memcpy_uv; + xp_cpu_to_nasid = xp_cpu_to_nasid_uv; + + return xpSuccess; +} + +void +xp_exit_uv(void) +{ + BUG_ON(!is_uv()); +} diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 11ac267ed68f..619208d61862 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -13,18 +13,10 @@ #ifndef _DRIVERS_MISC_SGIXP_XPC_H #define _DRIVERS_MISC_SGIXP_XPC_H -#include <linux/interrupt.h> -#include <linux/sysctl.h> -#include <linux/device.h> -#include <linux/mutex.h> +#include <linux/wait.h> #include <linux/completion.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/sn/bte.h> -#include <asm/sn/clksupport.h> -#include <asm/sn/addrs.h> -#include <asm/sn/mspec.h> -#include <asm/sn/shub_mmr.h> +#include <linux/timer.h> +#include <linux/sched.h> #include "xp.h" /* @@ -36,23 +28,7 @@ #define XPC_VERSION_MAJOR(_v) ((_v) >> 4) #define XPC_VERSION_MINOR(_v) ((_v) & 0xf) -/* - * The next macros define word or bit representations for given - * C-brick nasid in either the SAL provided bit array representing - * nasids in the partition/machine or the AMO_t array used for - * inter-partition initiation communications. - * - * For SN2 machines, C-Bricks are alway even numbered NASIDs. As - * such, some space will be saved by insisting that nasid information - * passed from SAL always be packed for C-Bricks and the - * cross-partition interrupts use the same packing scheme. - */ -#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2) -#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1)) -#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \ - (1UL << XPC_NASID_B_INDEX(_n))) -#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) - +/* define frequency of the heartbeat and frequency how often it's checked */ #define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ #define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ @@ -72,11 +48,11 @@ * * reserved page header * - * The first cacheline of the reserved page contains the header - * (struct xpc_rsvd_page). Before SAL initialization has completed, + * The first two 64-byte cachelines of the reserved page contain the + * header (struct xpc_rsvd_page). Before SAL initialization has completed, * SAL has set up the following fields of the reserved page header: - * SAL_signature, SAL_version, partid, and nasids_size. The other - * fields are set up by XPC. (xpc_rsvd_page points to the local + * SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The + * other fields are set up by XPC. (xpc_rsvd_page points to the local * partition's reserved page.) * * part_nasids mask @@ -87,14 +63,16 @@ * the actual nasids in the entire machine (mach_nasids). We're only * interested in the even numbered nasids (which contain the processors * and/or memory), so we only need half as many bits to represent the - * nasids. The part_nasids mask is located starting at the first cacheline - * following the reserved page header. The mach_nasids mask follows right - * after the part_nasids mask. The size in bytes of each mask is reflected - * by the reserved page header field 'nasids_size'. (Local partition's - * mask pointers are xpc_part_nasids and xpc_mach_nasids.) + * nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure + * to either divide or multiply by 2. The part_nasids mask is located + * starting at the first cacheline following the reserved page header. The + * mach_nasids mask follows right after the part_nasids mask. The size in + * bytes of each mask is reflected by the reserved page header field + * 'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids + * and xpc_mach_nasids.) * - * vars - * vars part + * vars (ia64-sn2 only) + * vars part (ia64-sn2 only) * * Immediately following the mach_nasids mask are the XPC variables * required by other partitions. First are those that are generic to all @@ -102,43 +80,26 @@ * which are partition specific (vars part). These are setup by XPC. * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * - * Note: Until vars_pa is set, the partition XPC code has not been initialized. + * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been + * initialized. */ struct xpc_rsvd_page { u64 SAL_signature; /* SAL: unique signature */ u64 SAL_version; /* SAL: version */ - u8 partid; /* SAL: partition ID */ + short SAL_partid; /* SAL: partition ID */ + short max_npartitions; /* value of XPC_MAX_PARTITIONS */ u8 version; - u8 pad1[6]; /* align to next u64 in cacheline */ - u64 vars_pa; /* physical address of struct xpc_vars */ - struct timespec stamp; /* time when reserved page was setup by XPC */ - u64 pad2[9]; /* align to last u64 in cacheline */ - u64 nasids_size; /* SAL: size of each nasid mask in bytes */ + u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */ + union { + unsigned long vars_pa; /* phys address of struct xpc_vars */ + unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */ + } sn; + unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ + u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */ + u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */ }; -#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */ - -#define XPC_SUPPORTS_RP_STAMP(_version) \ - (_version >= _XPC_VERSION(1, 1)) - -/* - * compare stamps - the return value is: - * - * < 0, if stamp1 < stamp2 - * = 0, if stamp1 == stamp2 - * > 0, if stamp1 > stamp2 - */ -static inline int -xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) -{ - int ret; - - ret = stamp1->tv_sec - stamp2->tv_sec; - if (ret == 0) - ret = stamp1->tv_nsec - stamp2->tv_nsec; - - return ret; -} +#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */ /* * Define the structures by which XPC variables can be exported to other @@ -154,85 +115,40 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) * reflected by incrementing either the major or minor version numbers * of struct xpc_vars. */ -struct xpc_vars { +struct xpc_vars_sn2 { u8 version; u64 heartbeat; - u64 heartbeating_to_mask; + DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); u64 heartbeat_offline; /* if 0, heartbeat should be changing */ - int act_nasid; - int act_phys_cpuid; - u64 vars_part_pa; - u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ - AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ + int activate_IRQ_nasid; + int activate_IRQ_phys_cpuid; + unsigned long vars_part_pa; + unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */ + struct amo *amos_page; /* vaddr of page of amos from MSPEC driver */ }; #define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ -#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ - (_version >= _XPC_VERSION(3, 1)) - -static inline int -xpc_hb_allowed(short partid, struct xpc_vars *vars) -{ - return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); -} - -static inline void -xpc_allow_hb(short partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask | (1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - -static inline void -xpc_disallow_hb(short partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask & ~(1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - -/* - * The AMOs page consists of a number of AMO variables which are divided into - * four groups, The first two groups are used to identify an IRQ's sender. - * These two groups consist of 64 and 128 AMO variables respectively. The last - * two groups, consisting of just one AMO variable each, are used to identify - * the remote partitions that are currently engaged (from the viewpoint of - * the XPC running on the remote partition). - */ -#define XPC_NOTIFY_IRQ_AMOS 0 -#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) -#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) -#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) - /* * The following structure describes the per partition specific variables. * * An array of these structures, one per partition, will be defined. As a * partition becomes active XPC will copy the array entry corresponding to - * itself from that partition. It is desirable that the size of this - * structure evenly divide into a cacheline, such that none of the entries - * in this array crosses a cacheline boundary. As it is now, each entry - * occupies half a cacheline. + * itself from that partition. It is desirable that the size of this structure + * evenly divides into a 128-byte cacheline, such that none of the entries in + * this array crosses a 128-byte cacheline boundary. As it is now, each entry + * occupies 64-bytes. */ -struct xpc_vars_part { +struct xpc_vars_part_sn2 { u64 magic; - u64 openclose_args_pa; /* physical address of open and close args */ - u64 GPs_pa; /* physical address of Get/Put values */ + unsigned long openclose_args_pa; /* phys addr of open and close args */ + unsigned long GPs_pa; /* physical address of Get/Put values */ + + unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */ - u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */ - int IPI_nasid; /* nasid of where to send IPIs */ - int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */ + int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ + int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ u8 nchannels; /* #of defined channels supported */ @@ -248,20 +164,95 @@ struct xpc_vars_part { * MAGIC2 indicates that this partition has pulled the remote partititions * per partition variables that pertain to this partition. */ -#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ -#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ +#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ +#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ /* the reserved page sizes and offsets */ #define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) -#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) +#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2)) -#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) -#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) -#define XPC_RP_VARS(_rp) ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \ - xp_nasid_mask_words)) -#define XPC_RP_VARS_PART(_rp) ((struct xpc_vars_part *) \ - ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE)) +#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \ + XPC_RP_HEADER_SIZE)) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \ + xpc_nasid_mask_nlongs) +#define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *) \ + (XPC_RP_MACH_NASIDS(_rp) + \ + xpc_nasid_mask_nlongs)) + +/* + * The activate_mq is used to send/receive GRU messages that affect XPC's + * heartbeat, partition active state, and channel state. This is UV only. + */ +struct xpc_activate_mq_msghdr_uv { + short partid; /* sender's partid */ + u8 act_state; /* sender's act_state at time msg sent */ + u8 type; /* message's type */ + unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */ +}; + +/* activate_mq defined message types */ +#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0 +#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1 +#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2 +#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3 + +#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4 +#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5 + +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9 + +#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10 +#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11 + +struct xpc_activate_mq_msg_uv { + struct xpc_activate_mq_msghdr_uv hdr; +}; + +struct xpc_activate_mq_msg_heartbeat_req_uv { + struct xpc_activate_mq_msghdr_uv hdr; + u64 heartbeat; +}; + +struct xpc_activate_mq_msg_activate_req_uv { + struct xpc_activate_mq_msghdr_uv hdr; + unsigned long rp_gpa; + unsigned long activate_mq_gpa; +}; + +struct xpc_activate_mq_msg_deactivate_req_uv { + struct xpc_activate_mq_msghdr_uv hdr; + enum xp_retval reason; +}; + +struct xpc_activate_mq_msg_chctl_closerequest_uv { + struct xpc_activate_mq_msghdr_uv hdr; + short ch_number; + enum xp_retval reason; +}; + +struct xpc_activate_mq_msg_chctl_closereply_uv { + struct xpc_activate_mq_msghdr_uv hdr; + short ch_number; +}; + +struct xpc_activate_mq_msg_chctl_openrequest_uv { + struct xpc_activate_mq_msghdr_uv hdr; + short ch_number; + short entry_size; /* size of notify_mq's GRU messages */ + short local_nentries; /* ??? Is this needed? What is? */ +}; + +struct xpc_activate_mq_msg_chctl_openreply_uv { + struct xpc_activate_mq_msghdr_uv hdr; + short ch_number; + short remote_nentries; /* ??? Is this needed? What is? */ + short local_nentries; /* ??? Is this needed? What is? */ + unsigned long local_notify_mq_gpa; +}; /* * Functions registered by add_timer() or called by kernel_thread() only @@ -270,22 +261,22 @@ struct xpc_vars_part { * the passed argument. */ #define XPC_PACK_ARGS(_arg1, _arg2) \ - ((((u64) _arg1) & 0xffffffff) | \ - ((((u64) _arg2) & 0xffffffff) << 32)) + ((((u64)_arg1) & 0xffffffff) | \ + ((((u64)_arg2) & 0xffffffff) << 32)) -#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff) -#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff) +#define XPC_UNPACK_ARG1(_args) (((u64)_args) & 0xffffffff) +#define XPC_UNPACK_ARG2(_args) ((((u64)_args) >> 32) & 0xffffffff) /* * Define a Get/Put value pair (pointers) used with a message queue. */ -struct xpc_gp { +struct xpc_gp_sn2 { s64 get; /* Get value */ s64 put; /* Put value */ }; #define XPC_GP_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS) + L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS) /* * Define a structure that contains arguments associated with opening and @@ -293,31 +284,89 @@ struct xpc_gp { */ struct xpc_openclose_args { u16 reason; /* reason why channel is closing */ - u16 msg_size; /* sizeof each message entry */ + u16 entry_size; /* sizeof each message entry */ u16 remote_nentries; /* #of message entries in remote msg queue */ u16 local_nentries; /* #of message entries in local msg queue */ - u64 local_msgqueue_pa; /* physical address of local message queue */ + unsigned long local_msgqueue_pa; /* phys addr of local message queue */ }; #define XPC_OPENCLOSE_ARGS_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS) + L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \ + XPC_MAX_NCHANNELS) -/* struct xpc_msg flags */ -#define XPC_M_DONE 0x01 /* msg has been received/consumed */ -#define XPC_M_READY 0x02 /* msg is ready to be sent */ -#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */ +/* + * Structures to define a fifo singly-linked list. + */ -#define XPC_MSG_ADDRESS(_payload) \ - ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET)) +struct xpc_fifo_entry_uv { + struct xpc_fifo_entry_uv *next; +}; + +struct xpc_fifo_head_uv { + struct xpc_fifo_entry_uv *first; + struct xpc_fifo_entry_uv *last; + spinlock_t lock; + int n_entries; +}; /* - * Defines notify entry. + * Define a sn2 styled message. + * + * A user-defined message resides in the payload area. The max size of the + * payload is defined by the user via xpc_connect(). + * + * The size of a message entry (within a message queue) must be a 128-byte + * cacheline sized multiple in order to facilitate the BTE transfer of messages + * from one message queue to another. + */ +struct xpc_msg_sn2 { + u8 flags; /* FOR XPC INTERNAL USE ONLY */ + u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ + s64 number; /* FOR XPC INTERNAL USE ONLY */ + + u64 payload; /* user defined portion of message */ +}; + +/* struct xpc_msg_sn2 flags */ + +#define XPC_M_SN2_DONE 0x01 /* msg has been received/consumed */ +#define XPC_M_SN2_READY 0x02 /* msg is ready to be sent */ +#define XPC_M_SN2_INTERRUPT 0x04 /* send interrupt when msg consumed */ + +/* + * The format of a uv XPC notify_mq GRU message is as follows: + * + * A user-defined message resides in the payload area. The max size of the + * payload is defined by the user via xpc_connect(). + * + * The size of a message (payload and header) sent via the GRU must be either 1 + * or 2 GRU_CACHE_LINE_BYTES in length. + */ + +struct xpc_notify_mq_msghdr_uv { + union { + unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */ + struct xpc_fifo_entry_uv next; /* FOR XPC INTERNAL USE ONLY */ + } u; + short partid; /* FOR XPC INTERNAL USE ONLY */ + u8 ch_number; /* FOR XPC INTERNAL USE ONLY */ + u8 size; /* FOR XPC INTERNAL USE ONLY */ + unsigned int msg_slot_number; /* FOR XPC INTERNAL USE ONLY */ +}; + +struct xpc_notify_mq_msg_uv { + struct xpc_notify_mq_msghdr_uv hdr; + unsigned long payload; +}; + +/* + * Define sn2's notify entry. * * This is used to notify a message's sender that their message was received * and consumed by the intended recipient. */ -struct xpc_notify { +struct xpc_notify_sn2 { u8 type; /* type of notification */ /* the following two fields are only used if type == XPC_N_CALL */ @@ -325,9 +374,20 @@ struct xpc_notify { void *key; /* pointer to user's key */ }; -/* struct xpc_notify type of notification */ +/* struct xpc_notify_sn2 type of notification */ + +#define XPC_N_CALL 0x01 /* notify function provided by user */ -#define XPC_N_CALL 0x01 /* notify function provided by user */ +/* + * Define uv's version of the notify entry. It additionally is used to allocate + * a msg slot on the remote partition into which is copied a sent message. + */ +struct xpc_send_msg_slot_uv { + struct xpc_fifo_entry_uv next; + unsigned int msg_slot_number; + xpc_notify_func func; /* user's notify function */ + void *key; /* pointer to user's key */ +}; /* * Define the structure that manages all the stuff required by a channel. In @@ -339,8 +399,12 @@ struct xpc_notify { * There is an array of these structures for each remote partition. It is * allocated at the time a partition becomes active. The array contains one * of these structures for each potential channel connection to that partition. + */ + +/* + * The following is sn2 only. * - * Each of these structures manages two message queues (circular buffers). + * Each channel structure manages two message queues (circular buffers). * They are allocated at the time a channel connection is made. One of * these message queues (local_msgqueue) holds the locally created messages * that are destined for the remote partition. The other of these message @@ -407,58 +471,72 @@ struct xpc_notify { * new messages, by the clearing of the message flags of the acknowledged * messages. */ + +struct xpc_channel_sn2 { + struct xpc_openclose_args *local_openclose_args; /* args passed on */ + /* opening or closing of channel */ + + void *local_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg_sn2 *local_msgqueue; /* local message queue */ + void *remote_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */ + /* partition's local message queue */ + unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */ + /* local message queue */ + + struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */ + + /* various flavors of local and remote Get/Put values */ + + struct xpc_gp_sn2 *local_GP; /* local Get/Put values */ + struct xpc_gp_sn2 remote_GP; /* remote Get/Put values */ + struct xpc_gp_sn2 w_local_GP; /* working local Get/Put values */ + struct xpc_gp_sn2 w_remote_GP; /* working remote Get/Put values */ + s64 next_msg_to_pull; /* Put value of next msg to pull */ + + struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ +}; + +struct xpc_channel_uv { + unsigned long remote_notify_mq_gpa; /* gru phys address of remote */ + /* partition's notify mq */ + + struct xpc_send_msg_slot_uv *send_msg_slots; + struct xpc_notify_mq_msg_uv *recv_msg_slots; + + struct xpc_fifo_head_uv msg_slot_free_list; + struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */ +}; + struct xpc_channel { short partid; /* ID of remote partition connected */ spinlock_t lock; /* lock for updating this structure */ - u32 flags; /* general flags */ + unsigned int flags; /* general flags */ enum xp_retval reason; /* reason why channel is disconnect'g */ int reason_line; /* line# disconnect initiated from */ u16 number; /* channel # */ - u16 msg_size; /* sizeof each msg entry */ + u16 entry_size; /* sizeof each msg entry */ u16 local_nentries; /* #of msg entries in local msg queue */ u16 remote_nentries; /* #of msg entries in remote msg queue */ - void *local_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *local_msgqueue; /* local message queue */ - void *remote_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ - /* local message queue */ - u64 remote_msgqueue_pa; /* phys addr of remote partition's */ - /* local message queue */ - atomic_t references; /* #of external references to queues */ atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ - u8 delayed_IPI_flags; /* IPI flags received, but delayed */ + u8 delayed_chctl_flags; /* chctl flags received, but delayed */ /* action until channel disconnected */ - /* queue of msg senders who want to be notified when msg received */ - atomic_t n_to_notify; /* #of msg senders to notify */ - struct xpc_notify *notify_queue; /* notify queue for messages sent */ xpc_channel_func func; /* user's channel function */ void *key; /* pointer to user's key */ - struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ struct completion wdisconnect_wait; /* wait for channel disconnect */ - struct xpc_openclose_args *local_openclose_args; /* args passed on */ - /* opening or closing of channel */ - - /* various flavors of local and remote Get/Put values */ - - struct xpc_gp *local_GP; /* local Get/Put values */ - struct xpc_gp remote_GP; /* remote Get/Put values */ - struct xpc_gp w_local_GP; /* working local Get/Put values */ - struct xpc_gp w_remote_GP; /* working remote Get/Put values */ - s64 next_msg_to_pull; /* Put value of next msg to pull */ - /* kthread management related fields */ atomic_t kthreads_assigned; /* #of kthreads assigned to channel */ @@ -469,6 +547,11 @@ struct xpc_channel { wait_queue_head_t idle_wq; /* idle kthread wait queue */ + union { + struct xpc_channel_sn2 sn2; + struct xpc_channel_uv uv; + } sn; + } ____cacheline_aligned; /* struct xpc_channel flags */ @@ -501,33 +584,128 @@ struct xpc_channel { #define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */ /* - * Manages channels on a partition basis. There is one of these structures + * The channel control flags (chctl) union consists of a 64-bit variable which + * is divided up into eight bytes, ordered from right to left. Byte zero + * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte + * can have one or more of the chctl flags set in it. + */ + +union xpc_channel_ctl_flags { + u64 all_flags; + u8 flags[XPC_MAX_NCHANNELS]; +}; + +/* chctl flags */ +#define XPC_CHCTL_CLOSEREQUEST 0x01 +#define XPC_CHCTL_CLOSEREPLY 0x02 +#define XPC_CHCTL_OPENREQUEST 0x04 +#define XPC_CHCTL_OPENREPLY 0x08 +#define XPC_CHCTL_MSGREQUEST 0x10 + +#define XPC_OPENCLOSE_CHCTL_FLAGS \ + (XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \ + XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY) +#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST + +static inline int +xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl) +{ + int ch_number; + + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) { + if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) + return 1; + } + return 0; +} + +static inline int +xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl) +{ + int ch_number; + + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) { + if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS) + return 1; + } + return 0; +} + +/* + * Manage channels on a partition basis. There is one of these structures * for each partition (a partition will never utilize the structure that * represents itself). */ + +struct xpc_partition_sn2 { + unsigned long remote_amos_page_pa; /* paddr of partition's amos page */ + int activate_IRQ_nasid; /* active partition's act/deact nasid */ + int activate_IRQ_phys_cpuid; /* active part's act/deact phys cpuid */ + + unsigned long remote_vars_pa; /* phys addr of partition's vars */ + unsigned long remote_vars_part_pa; /* paddr of partition's vars part */ + u8 remote_vars_version; /* version# of partition's vars */ + + void *local_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp_sn2 *local_GPs; /* local Get/Put values */ + void *remote_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp_sn2 *remote_GPs; /* copy of remote partition's local */ + /* Get/Put values */ + unsigned long remote_GPs_pa; /* phys addr of remote partition's local */ + /* Get/Put values */ + + void *local_openclose_args_base; /* base address of kmalloc'd space */ + struct xpc_openclose_args *local_openclose_args; /* local's args */ + unsigned long remote_openclose_args_pa; /* phys addr of remote's args */ + + int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ + int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ + char notify_IRQ_owner[8]; /* notify IRQ's owner's name */ + + struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */ + struct amo *local_chctl_amo_va; /* address of chctl flags' amo */ + + struct timer_list dropped_notify_IRQ_timer; /* dropped IRQ timer */ +}; + +struct xpc_partition_uv { + unsigned long remote_activate_mq_gpa; /* gru phys address of remote */ + /* partition's activate mq */ + spinlock_t flags_lock; /* protect updating of flags */ + unsigned int flags; /* general flags */ + u8 remote_act_state; /* remote partition's act_state */ + u8 act_state_req; /* act_state request from remote partition */ + enum xp_retval reason; /* reason for deactivate act_state request */ + u64 heartbeat; /* incremented by remote partition */ +}; + +/* struct xpc_partition_uv flags */ + +#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001 +#define XPC_P_ENGAGED_UV 0x00000002 + +/* struct xpc_partition_uv act_state change requests */ + +#define XPC_P_ASR_ACTIVATE_UV 0x01 +#define XPC_P_ASR_REACTIVATE_UV 0x02 +#define XPC_P_ASR_DEACTIVATE_UV 0x03 + struct xpc_partition { /* XPC HB infrastructure */ u8 remote_rp_version; /* version# of partition's rsvd pg */ - struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */ - u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ - u64 remote_vars_pa; /* phys addr of partition's vars */ - u64 remote_vars_part_pa; /* phys addr of partition's vars part */ + unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */ + unsigned long remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 last_heartbeat; /* HB at last read */ - u64 remote_amos_page_pa; /* phys addr of partition's amos page */ - int remote_act_nasid; /* active part's act/deact nasid */ - int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */ - u32 act_IRQ_rcvd; /* IRQs since activation */ + u32 activate_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ u8 act_state; /* from XPC HB viewpoint */ - u8 remote_vars_version; /* version# of partition's vars */ enum xp_retval reason; /* reason partition is deactivating */ int reason_line; /* line# deactivation initiated from */ - int reactivate_nasid; /* nasid in partition to reactivate */ - unsigned long disengage_request_timeout; /* timeout in jiffies */ - struct timer_list disengage_request_timer; + unsigned long disengage_timeout; /* timeout in jiffies */ + struct timer_list disengage_timer; /* XPC infrastructure referencing and teardown control */ @@ -535,85 +713,63 @@ struct xpc_partition { wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ atomic_t references; /* #of references to infrastructure */ - /* - * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN - * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION - * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE - * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.) - */ - u8 nchannels; /* #of defined channels supported */ atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ atomic_t nchannels_engaged; /* #of channels engaged with remote part */ struct xpc_channel *channels; /* array of channel structures */ - void *local_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *local_GPs; /* local Get/Put values */ - void *remote_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *remote_GPs; /* copy of remote partition's local */ - /* Get/Put values */ - u64 remote_GPs_pa; /* phys address of remote partition's local */ - /* Get/Put values */ + /* fields used for managing channel avialability and activity */ - /* fields used to pass args when opening or closing a channel */ + union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */ + spinlock_t chctl_lock; /* chctl flags lock */ - void *local_openclose_args_base; /* base address of kmalloc'd space */ - struct xpc_openclose_args *local_openclose_args; /* local's args */ void *remote_openclose_args_base; /* base address of kmalloc'd space */ struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ /* args */ - u64 remote_openclose_args_pa; /* phys addr of remote's args */ - - /* IPI sending, receiving and handling related fields */ - - int remote_IPI_nasid; /* nasid of where to send IPIs */ - int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ - AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ - - AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ - u64 local_IPI_amo; /* IPI amo flags yet to be handled */ - char IPI_owner[8]; /* IPI owner's name */ - struct timer_list dropped_IPI_timer; /* dropped IPI timer */ - - spinlock_t IPI_lock; /* IPI handler lock */ /* channel manager related fields */ atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */ wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */ + union { + struct xpc_partition_sn2 sn2; + struct xpc_partition_uv uv; + } sn; + } ____cacheline_aligned; /* struct xpc_partition act_state values (for XPC HB) */ -#define XPC_P_INACTIVE 0x00 /* partition is not active */ -#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */ -#define XPC_P_ACTIVATING 0x02 /* activation thread started */ -#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */ -#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */ +#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */ +#define XPC_P_AS_ACTIVATION_REQ 0x01 /* created thread to activate */ +#define XPC_P_AS_ACTIVATING 0x02 /* activation thread started */ +#define XPC_P_AS_ACTIVE 0x03 /* xpc_partition_up() was called */ +#define XPC_P_AS_DEACTIVATING 0x04 /* partition deactivation initiated */ #define XPC_DEACTIVATE_PARTITION(_p, _reason) \ xpc_deactivate_partition(__LINE__, (_p), (_reason)) /* struct xpc_partition setup_state values */ -#define XPC_P_UNSET 0x00 /* infrastructure was never setup */ -#define XPC_P_SETUP 0x01 /* infrastructure is setup */ -#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ -#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ +#define XPC_P_SS_UNSET 0x00 /* infrastructure was never setup */ +#define XPC_P_SS_SETUP 0x01 /* infrastructure is setup */ +#define XPC_P_SS_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ +#define XPC_P_SS_TORNDOWN 0x03 /* infrastructure is torndown */ /* - * struct xpc_partition IPI_timer #of seconds to wait before checking for - * dropped IPIs. These occur whenever an IPI amo write doesn't complete until - * after the IPI was received. + * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the + * following interval #of seconds before checking for dropped notify IRQs. + * These can occur whenever an IRQ's associated amo write doesn't complete + * until after the IRQ was received. */ -#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) +#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL (0.25 * HZ) /* number of seconds to wait for other partitions to disengage */ -#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 +#define XPC_DISENGAGE_DEFAULT_TIMELIMIT 90 -/* interval in seconds to print 'waiting disengagement' messages */ -#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 +/* interval in seconds to print 'waiting deactivation' messages */ +#define XPC_DEACTIVATE_PRINTMSG_INTERVAL 10 #define XPC_PARTID(_p) ((short)((_p) - &xpc_partitions[0])) @@ -623,33 +779,92 @@ extern struct xpc_registration xpc_registrations[]; /* found in xpc_main.c */ extern struct device *xpc_part; extern struct device *xpc_chan; -extern int xpc_disengage_request_timelimit; -extern int xpc_disengage_request_timedout; -extern irqreturn_t xpc_notify_IRQ_handler(int, void *); -extern void xpc_dropped_IPI_check(struct xpc_partition *); +extern int xpc_disengage_timelimit; +extern int xpc_disengage_timedout; +extern int xpc_activate_IRQ_rcvd; +extern spinlock_t xpc_activate_IRQ_rcvd_lock; +extern wait_queue_head_t xpc_activate_IRQ_wq; +extern void *xpc_heartbeating_to_mask; +extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); +extern int (*xpc_setup_partitions_sn) (void); +extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *, + unsigned long *, + size_t *); +extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *); +extern void (*xpc_heartbeat_init) (void); +extern void (*xpc_heartbeat_exit) (void); +extern void (*xpc_increment_heartbeat) (void); +extern void (*xpc_offline_heartbeat) (void); +extern void (*xpc_online_heartbeat) (void); +extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *); +extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); +extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); +extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *); +extern void (*xpc_teardown_msg_structures) (struct xpc_channel *); +extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); +extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); +extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *); +extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *); +extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, + unsigned long, int); +extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); +extern void (*xpc_request_partition_deactivation) (struct xpc_partition *); +extern void (*xpc_cancel_partition_deactivation_request) ( + struct xpc_partition *); +extern void (*xpc_process_activate_IRQ_rcvd) (void); +extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *); +extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *); + +extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *); +extern int (*xpc_partition_engaged) (short); +extern int (*xpc_any_partition_engaged) (void); +extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *); +extern void (*xpc_assume_partition_disengaged) (short); + +extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_chctl_closereply) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); + +extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *, + unsigned long); + +extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *, + u16, u8, xpc_notify_func, void *); +extern void (*xpc_received_payload) (struct xpc_channel *, void *); + +/* found in xpc_sn2.c */ +extern int xpc_init_sn2(void); +extern void xpc_exit_sn2(void); + +/* found in xpc_uv.c */ +extern int xpc_init_uv(void); +extern void xpc_exit_uv(void); /* found in xpc_partition.c */ extern int xpc_exiting; -extern struct xpc_vars *xpc_vars; +extern int xpc_nasid_mask_nlongs; extern struct xpc_rsvd_page *xpc_rsvd_page; -extern struct xpc_vars_part *xpc_vars_part; -extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; -extern char *xpc_remote_copy_buffer; -extern void *xpc_remote_copy_buffer_base; +extern unsigned long *xpc_mach_nasids; +extern struct xpc_partition *xpc_partitions; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); -extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); -extern void xpc_allow_IPI_ops(void); -extern void xpc_restrict_IPI_ops(void); -extern int xpc_identify_act_IRQ_sender(void); +extern int xpc_setup_rsvd_page(void); +extern void xpc_teardown_rsvd_page(void); +extern int xpc_identify_activate_IRQ_sender(void); extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); -extern void xpc_check_remote_hb(void); +extern enum xp_retval xpc_get_remote_rp(int, unsigned long *, + struct xpc_rsvd_page *, + unsigned long *); extern void xpc_deactivate_partition(const int, struct xpc_partition *, enum xp_retval); extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); @@ -657,21 +872,52 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); /* found in xpc_channel.c */ extern void xpc_initiate_connect(int); extern void xpc_initiate_disconnect(int); -extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **); -extern enum xp_retval xpc_initiate_send(short, int, void *); -extern enum xp_retval xpc_initiate_send_notify(short, int, void *, +extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *); +extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16); +extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16, xpc_notify_func, void *); extern void xpc_initiate_received(short, int, void *); -extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *); -extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *); -extern void xpc_process_channel_activity(struct xpc_partition *); +extern void xpc_process_sent_chctl_flags(struct xpc_partition *); extern void xpc_connected_callout(struct xpc_channel *); -extern void xpc_deliver_msg(struct xpc_channel *); +extern void xpc_deliver_payload(struct xpc_channel *); extern void xpc_disconnect_channel(const int, struct xpc_channel *, enum xp_retval, unsigned long *); extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval); extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval); -extern void xpc_teardown_infrastructure(struct xpc_partition *); + +static inline int +xpc_hb_allowed(short partid, void *heartbeating_to_mask) +{ + return test_bit(partid, heartbeating_to_mask); +} + +static inline int +xpc_any_hbs_allowed(void) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions); +} + +static inline void +xpc_allow_hb(short partid) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + set_bit(partid, xpc_heartbeating_to_mask); +} + +static inline void +xpc_disallow_hb(short partid) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + clear_bit(partid, xpc_heartbeating_to_mask); +} + +static inline void +xpc_disallow_all_hbs(void) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions); +} static inline void xpc_wakeup_channel_mgr(struct xpc_partition *part) @@ -713,7 +959,7 @@ xpc_part_deref(struct xpc_partition *part) s32 refs = atomic_dec_return(&part->references); DBUG_ON(refs < 0); - if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) + if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN) wake_up(&part->teardown_wq); } @@ -723,7 +969,7 @@ xpc_part_ref(struct xpc_partition *part) int setup; atomic_inc(&part->references); - setup = (part->setup_state == XPC_P_SETUP); + setup = (part->setup_state == XPC_P_SS_SETUP); if (!setup) xpc_part_deref(part); @@ -741,416 +987,4 @@ xpc_part_ref(struct xpc_partition *part) (_p)->reason_line = _line; \ } -/* - * This next set of inlines are used to keep track of when a partition is - * potentially engaged in accessing memory belonging to another partition. - */ - -static inline void -xpc_mark_partition_engaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_mark_partition_disengaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_request_partition_disengage(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_cancel_partition_disengage_request(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline u64 -xpc_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline u64 -xpc_partition_disengage_requested(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline void -xpc_clear_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); -} - -static inline void -xpc_clear_partition_disengage_request(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); -} - -/* - * The following set of macros and inlines are used for the sending and - * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, - * one that is associated with partition activity (SGI_XPC_ACTIVATE) and - * the other that is associated with channel activity (SGI_XPC_NOTIFY). - */ - -static inline u64 -xpc_IPI_receive(AMO_t *amo) -{ - return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); -} - -static inline enum xp_retval -xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) -{ - int ret = 0; - unsigned long irq_flags; - - local_irq_save(irq_flags); - - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag); - sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); - - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); - - return ((ret == 0) ? xpSuccess : xpPioReadError); -} - -/* - * IPIs associated with SGI_XPC_ACTIVATE IRQ. - */ - -/* - * Flag the appropriate AMO variable and send an IPI to the specified node. - */ -static inline void -xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, - int to_phys_cpuid) -{ - int w_index = XPC_NASID_W_INDEX(from_nasid); - int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *)__va(amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); - - (void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, - to_phys_cpuid, SGI_XPC_ACTIVATE); -} - -static inline void -xpc_IPI_send_activate(struct xpc_vars *vars) -{ - xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0), - vars->act_nasid, vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_activated(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, - part->remote_act_phys_cpuid); -} - -static inline void -xpc_IPI_send_reactivate(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid, - xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_disengage(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, - part->remote_act_phys_cpuid); -} - -/* - * IPIs associated with SGI_XPC_NOTIFY IRQ. - */ - -/* - * Send an IPI to the remote partition that is associated with the - * specified channel. - */ -#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \ - xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f) - -static inline void -xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string, - unsigned long *irq_flags) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - enum xp_retval ret; - - if (likely(part->act_state != XPC_P_DEACTIVATING)) { - ret = xpc_IPI_send(part->remote_IPI_amo_va, - (u64)ipi_flag << (ch->number * 8), - part->remote_IPI_nasid, - part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY); - dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", - ipi_flag_string, ch->partid, ch->number, ret); - if (unlikely(ret != xpSuccess)) { - if (irq_flags != NULL) - spin_unlock_irqrestore(&ch->lock, *irq_flags); - XPC_DEACTIVATE_PARTITION(part, ret); - if (irq_flags != NULL) - spin_lock_irqsave(&ch->lock, *irq_flags); - } - } -} - -/* - * Make it look like the remote partition, which is associated with the - * specified channel, sent us an IPI. This faked IPI will be handled - * by xpc_dropped_IPI_check(). - */ -#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \ - xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f) - -static inline void -xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, - char *ipi_flag_string) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - - FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable), - FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); - dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", - ipi_flag_string, ch->partid, ch->number); -} - -/* - * The sending and receiving of IPIs includes the setting of an AMO variable - * to indicate the reason the IPI was sent. The 64-bit variable is divided - * up into eight bytes, ordered from right to left. Byte zero pertains to - * channel 0, byte one to channel 1, and so on. Each byte is described by - * the following IPI flags. - */ - -#define XPC_IPI_CLOSEREQUEST 0x01 -#define XPC_IPI_CLOSEREPLY 0x02 -#define XPC_IPI_OPENREQUEST 0x04 -#define XPC_IPI_OPENREPLY 0x08 -#define XPC_IPI_MSGREQUEST 0x10 - -/* given an AMO variable and a channel#, get its associated IPI flags */ -#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) -#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) - -#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL) -#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010UL) - -static inline void -xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->reason = ch->reason; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->msg_size = ch->msg_size; - args->local_nentries = ch->local_nentries; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->remote_nentries = ch->remote_nentries; - args->local_nentries = ch->local_nentries; - args->local_msgqueue_pa = __pa(ch->local_msgqueue); - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL); -} - -static inline void -xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST); -} - -/* - * Memory for XPC's AMO variables is allocated by the MSPEC driver. These - * pages are located in the lowest granule. The lowest granule uses 4k pages - * for cached references and an alternate TLB handler to never provide a - * cacheable mapping for the entire region. This will prevent speculative - * reading of cached copies of our lines from being issued which will cause - * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an - * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition - * activation and 2 AMO variables for partition deactivation. - */ -static inline AMO_t * -xpc_IPI_init(int index) -{ - AMO_t *amo = xpc_vars->amos_page + index; - - (void)xpc_IPI_receive(amo); /* clear AMO variable */ - return amo; -} - -static inline enum xp_retval -xpc_map_bte_errors(bte_result_t error) -{ - return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError); -} - -/* - * Check to see if there is any channel activity to/from the specified - * partition. - */ -static inline void -xpc_check_for_channel_activity(struct xpc_partition *part) -{ - u64 IPI_amo; - unsigned long irq_flags; - - IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va); - if (IPI_amo == 0) - return; - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - part->local_IPI_amo |= IPI_amo; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", - XPC_PARTID(part), IPI_amo); - - xpc_wakeup_channel_mgr(part); -} - #endif /* _DRIVERS_MISC_SGIXP_XPC_H */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9c90c2d55c08..9cd2ebe2a3b6 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -14,536 +14,10 @@ * */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/cache.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/completion.h> -#include <asm/sn/bte.h> -#include <asm/sn/sn_sal.h> +#include <linux/device.h> #include "xpc.h" /* - * Guarantee that the kzalloc'd memory is cacheline aligned. - */ -static void * -xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) -{ - /* see if kzalloc will give us cachline aligned memory by default */ - *base = kzalloc(size, flags); - if (*base == NULL) - return NULL; - - if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) - return *base; - - kfree(*base); - - /* nope, we'll have to do it ourselves */ - *base = kzalloc(size + L1_CACHE_BYTES, flags); - if (*base == NULL) - return NULL; - - return (void *)L1_CACHE_ALIGN((u64)*base); -} - -/* - * Set up the initial values for the XPartition Communication channels. - */ -static void -xpc_initialize_channels(struct xpc_partition *part, short partid) -{ - int ch_number; - struct xpc_channel *ch; - - for (ch_number = 0; ch_number < part->nchannels; ch_number++) { - ch = &part->channels[ch_number]; - - ch->partid = partid; - ch->number = ch_number; - ch->flags = XPC_C_DISCONNECTED; - - ch->local_GP = &part->local_GPs[ch_number]; - ch->local_openclose_args = - &part->local_openclose_args[ch_number]; - - atomic_set(&ch->kthreads_assigned, 0); - atomic_set(&ch->kthreads_idle, 0); - atomic_set(&ch->kthreads_active, 0); - - atomic_set(&ch->references, 0); - atomic_set(&ch->n_to_notify, 0); - - spin_lock_init(&ch->lock); - mutex_init(&ch->msg_to_pull_mutex); - init_completion(&ch->wdisconnect_wait); - - atomic_set(&ch->n_on_msg_allocate_wq, 0); - init_waitqueue_head(&ch->msg_allocate_wq); - init_waitqueue_head(&ch->idle_wq); - } -} - -/* - * Setup the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. - */ -enum xp_retval -xpc_setup_infrastructure(struct xpc_partition *part) -{ - int ret, cpuid; - struct timer_list *timer; - short partid = XPC_PARTID(part); - - /* - * Zero out MOST of the entry for this partition. Only the fields - * starting with `nchannels' will be zeroed. The preceding fields must - * remain `viable' across partition ups and downs, since they may be - * referenced during this memset() operation. - */ - memset(&part->nchannels, 0, sizeof(struct xpc_partition) - - offsetof(struct xpc_partition, nchannels)); - - /* - * Allocate all of the channel structures as a contiguous chunk of - * memory. - */ - part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS, - GFP_KERNEL); - if (part->channels == NULL) { - dev_err(xpc_chan, "can't get memory for channels\n"); - return xpNoMemory; - } - - part->nchannels = XPC_NCHANNELS; - - /* allocate all the required GET/PUT values */ - - part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part->local_GPs_base); - if (part->local_GPs == NULL) { - kfree(part->channels); - part->channels = NULL; - dev_err(xpc_chan, "can't get memory for local get/put " - "values\n"); - return xpNoMemory; - } - - part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part-> - remote_GPs_base); - if (part->remote_GPs == NULL) { - dev_err(xpc_chan, "can't get memory for remote get/put " - "values\n"); - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - /* allocate all the required open and close args */ - - part->local_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->local_openclose_args_base); - if (part->local_openclose_args == NULL) { - dev_err(xpc_chan, "can't get memory for local connect args\n"); - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - part->remote_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->remote_openclose_args_base); - if (part->remote_openclose_args == NULL) { - dev_err(xpc_chan, "can't get memory for remote connect args\n"); - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - xpc_initialize_channels(part, partid); - - atomic_set(&part->nchannels_active, 0); - atomic_set(&part->nchannels_engaged, 0); - - /* local_IPI_amo were set to 0 by an earlier memset() */ - - /* Initialize this partitions AMO_t structure */ - part->local_IPI_amo_va = xpc_IPI_init(partid); - - spin_lock_init(&part->IPI_lock); - - atomic_set(&part->channel_mgr_requests, 1); - init_waitqueue_head(&part->channel_mgr_wq); - - sprintf(part->IPI_owner, "xpc%02d", partid); - ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED, - part->IPI_owner, (void *)(u64)partid); - if (ret != 0) { - dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " - "errno=%d\n", -ret); - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpLackOfResources; - } - - /* Setup a timer to check for dropped IPIs */ - timer = &part->dropped_IPI_timer; - init_timer(timer); - timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check; - timer->data = (unsigned long)part; - timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT; - add_timer(timer); - - /* - * With the setting of the partition setup_state to XPC_P_SETUP, we're - * declaring that this partition is ready to go. - */ - part->setup_state = XPC_P_SETUP; - - /* - * Setup the per partition specific variables required by the - * remote partition to establish channel connections with us. - * - * The setting of the magic # indicates that these per partition - * specific variables are ready to be used. - */ - xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs); - xpc_vars_part[partid].openclose_args_pa = - __pa(part->local_openclose_args); - xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); - cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ - xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); - xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); - xpc_vars_part[partid].nchannels = part->nchannels; - xpc_vars_part[partid].magic = XPC_VP_MAGIC1; - - return xpSuccess; -} - -/* - * Create a wrapper that hides the underlying mechanism for pulling a cacheline - * (or multiple cachelines) from a remote partition. - * - * src must be a cacheline aligned physical address on the remote partition. - * dst must be a cacheline aligned virtual address on this partition. - * cnt must be an cacheline sized - */ -static enum xp_retval -xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, - const void *src, size_t cnt) -{ - bte_result_t bte_ret; - - DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); - DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); - DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); - - if (part->act_state == XPC_P_DEACTIVATING) - return part->reason; - - bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt, - (BTE_NORMAL | BTE_WACQUIRE), NULL); - if (bte_ret == BTE_SUCCESS) - return xpSuccess; - - dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n", - XPC_PARTID(part), bte_ret); - - return xpc_map_bte_errors(bte_ret); -} - -/* - * Pull the remote per partition specific variables from the specified - * partition. - */ -enum xp_retval -xpc_pull_remote_vars_part(struct xpc_partition *part) -{ - u8 buffer[L1_CACHE_BYTES * 2]; - struct xpc_vars_part *pulled_entry_cacheline = - (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer); - struct xpc_vars_part *pulled_entry; - u64 remote_entry_cacheline_pa, remote_entry_pa; - short partid = XPC_PARTID(part); - enum xp_retval ret; - - /* pull the cacheline that contains the variables we're interested in */ - - DBUG_ON(part->remote_vars_part_pa != - L1_CACHE_ALIGN(part->remote_vars_part_pa)); - DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2); - - remote_entry_pa = part->remote_vars_part_pa + - sn_partition_id * sizeof(struct xpc_vars_part); - - remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); - - pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline + - (remote_entry_pa & - (L1_CACHE_BYTES - 1))); - - ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline, - (void *)remote_entry_cacheline_pa, - L1_CACHE_BYTES); - if (ret != xpSuccess) { - dev_dbg(xpc_chan, "failed to pull XPC vars_part from " - "partition %d, ret=%d\n", partid, ret); - return ret; - } - - /* see if they've been set up yet */ - - if (pulled_entry->magic != XPC_VP_MAGIC1 && - pulled_entry->magic != XPC_VP_MAGIC2) { - - if (pulled_entry->magic != 0) { - dev_dbg(xpc_chan, "partition %d's XPC vars_part for " - "partition %d has bad magic value (=0x%lx)\n", - partid, sn_partition_id, pulled_entry->magic); - return xpBadMagic; - } - - /* they've not been initialized yet */ - return xpRetry; - } - - if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) { - - /* validate the variables */ - - if (pulled_entry->GPs_pa == 0 || - pulled_entry->openclose_args_pa == 0 || - pulled_entry->IPI_amo_pa == 0) { - - dev_err(xpc_chan, "partition %d's XPC vars_part for " - "partition %d are not valid\n", partid, - sn_partition_id); - return xpInvalidAddress; - } - - /* the variables we imported look to be valid */ - - part->remote_GPs_pa = pulled_entry->GPs_pa; - part->remote_openclose_args_pa = - pulled_entry->openclose_args_pa; - part->remote_IPI_amo_va = - (AMO_t *)__va(pulled_entry->IPI_amo_pa); - part->remote_IPI_nasid = pulled_entry->IPI_nasid; - part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; - - if (part->nchannels > pulled_entry->nchannels) - part->nchannels = pulled_entry->nchannels; - - /* let the other side know that we've pulled their variables */ - - xpc_vars_part[partid].magic = XPC_VP_MAGIC2; - } - - if (pulled_entry->magic == XPC_VP_MAGIC1) - return xpRetry; - - return xpSuccess; -} - -/* - * Get the IPI flags and pull the openclose args and/or remote GPs as needed. - */ -static u64 -xpc_get_IPI_flags(struct xpc_partition *part) -{ - unsigned long irq_flags; - u64 IPI_amo; - enum xp_retval ret; - - /* - * See if there are any IPI flags to be handled. - */ - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - IPI_amo = part->local_IPI_amo; - if (IPI_amo != 0) - part->local_IPI_amo = 0; - - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines(part, - part->remote_openclose_args, - (void *)part-> - remote_openclose_args_pa, - XPC_OPENCLOSE_ARGS_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - - dev_dbg(xpc_chan, "failed to pull openclose args from " - "partition %d, ret=%d\n", XPC_PARTID(part), - ret); - - /* don't bother processing IPIs anymore */ - IPI_amo = 0; - } - } - - if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines(part, part->remote_GPs, - (void *)part->remote_GPs_pa, - XPC_GP_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - - dev_dbg(xpc_chan, "failed to pull GPs from partition " - "%d, ret=%d\n", XPC_PARTID(part), ret); - - /* don't bother processing IPIs anymore */ - IPI_amo = 0; - } - } - - return IPI_amo; -} - -/* - * Allocate the local message queue and the notify queue. - */ -static enum xp_retval -xpc_allocate_local_msgqueue(struct xpc_channel *ch) -{ - unsigned long irq_flags; - int nentries; - size_t nbytes; - - for (nentries = ch->local_nentries; nentries > 0; nentries--) { - - nbytes = nentries * ch->msg_size; - ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, - GFP_KERNEL, - &ch->local_msgqueue_base); - if (ch->local_msgqueue == NULL) - continue; - - nbytes = nentries * sizeof(struct xpc_notify); - ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); - if (ch->notify_queue == NULL) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - continue; - } - - spin_lock_irqsave(&ch->lock, irq_flags); - if (nentries < ch->local_nentries) { - dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, " - "partid=%d, channel=%d\n", nentries, - ch->local_nentries, ch->partid, ch->number); - - ch->local_nentries = nentries; - } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return xpSuccess; - } - - dev_dbg(xpc_chan, "can't get memory for local message queue and notify " - "queue, partid=%d, channel=%d\n", ch->partid, ch->number); - return xpNoMemory; -} - -/* - * Allocate the cached remote message queue. - */ -static enum xp_retval -xpc_allocate_remote_msgqueue(struct xpc_channel *ch) -{ - unsigned long irq_flags; - int nentries; - size_t nbytes; - - DBUG_ON(ch->remote_nentries <= 0); - - for (nentries = ch->remote_nentries; nentries > 0; nentries--) { - - nbytes = nentries * ch->msg_size; - ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, - GFP_KERNEL, - &ch->remote_msgqueue_base); - if (ch->remote_msgqueue == NULL) - continue; - - spin_lock_irqsave(&ch->lock, irq_flags); - if (nentries < ch->remote_nentries) { - dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, " - "partid=%d, channel=%d\n", nentries, - ch->remote_nentries, ch->partid, ch->number); - - ch->remote_nentries = nentries; - } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return xpSuccess; - } - - dev_dbg(xpc_chan, "can't get memory for cached remote message queue, " - "partid=%d, channel=%d\n", ch->partid, ch->number); - return xpNoMemory; -} - -/* - * Allocate message queues and other stuff associated with a channel. - * - * Note: Assumes all of the channel sizes are filled in. - */ -static enum xp_retval -xpc_allocate_msgqueues(struct xpc_channel *ch) -{ - unsigned long irq_flags; - enum xp_retval ret; - - DBUG_ON(ch->flags & XPC_C_SETUP); - - ret = xpc_allocate_local_msgqueue(ch); - if (ret != xpSuccess) - return ret; - - ret = xpc_allocate_remote_msgqueue(ch); - if (ret != xpSuccess) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; - return ret; - } - - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags |= XPC_C_SETUP; - spin_unlock_irqrestore(&ch->lock, irq_flags); - - return xpSuccess; -} - -/* * Process a connect message from a remote partition. * * Note: xpc_process_connect() is expecting to be called with the @@ -565,30 +39,29 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_SETUP)) { spin_unlock_irqrestore(&ch->lock, *irq_flags); - ret = xpc_allocate_msgqueues(ch); + ret = xpc_setup_msg_structures(ch); spin_lock_irqsave(&ch->lock, *irq_flags); if (ret != xpSuccess) XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags); + ch->flags |= XPC_C_SETUP; + if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - DBUG_ON(!(ch->flags & XPC_C_SETUP)); DBUG_ON(ch->local_msgqueue == NULL); DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { ch->flags |= XPC_C_OPENREPLY; - xpc_IPI_send_openreply(ch, irq_flags); + xpc_send_chctl_openreply(ch, irq_flags); } if (!(ch->flags & XPC_C_ROPENREPLY)) return; - DBUG_ON(ch->remote_msgqueue_pa == 0); - ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */ dev_info(xpc_chan, "channel %d to partition %d connected\n", @@ -600,99 +73,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) } /* - * Notify those who wanted to be notified upon delivery of their message. - */ -static void -xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put) -{ - struct xpc_notify *notify; - u8 notify_type; - s64 get = ch->w_remote_GP.get - 1; - - while (++get < put && atomic_read(&ch->n_to_notify) > 0) { - - notify = &ch->notify_queue[get % ch->local_nentries]; - - /* - * See if the notify entry indicates it was associated with - * a message who's sender wants to be notified. It is possible - * that it is, but someone else is doing or has done the - * notification. - */ - notify_type = notify->type; - if (notify_type == 0 || - cmpxchg(¬ify->type, notify_type, 0) != notify_type) { - continue; - } - - DBUG_ON(notify_type != XPC_N_CALL); - - atomic_dec(&ch->n_to_notify); - - if (notify->func != NULL) { - dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *)notify, get, ch->partid, ch->number); - - notify->func(reason, ch->partid, ch->number, - notify->key); - - dev_dbg(xpc_chan, "notify->func() returned, " - "notify=0x%p, msg_number=%ld, partid=%d, " - "channel=%d\n", (void *)notify, get, - ch->partid, ch->number); - } - } -} - -/* - * Free up message queues and other stuff that were allocated for the specified - * channel. - * - * Note: ch->reason and ch->reason_line are left set for debugging purposes, - * they're cleared when XPC_C_DISCONNECTED is cleared. - */ -static void -xpc_free_msgqueues(struct xpc_channel *ch) -{ - DBUG_ON(!spin_is_locked(&ch->lock)); - DBUG_ON(atomic_read(&ch->n_to_notify) != 0); - - ch->remote_msgqueue_pa = 0; - ch->func = NULL; - ch->key = NULL; - ch->msg_size = 0; - ch->local_nentries = 0; - ch->remote_nentries = 0; - ch->kthreads_assigned_limit = 0; - ch->kthreads_idle_limit = 0; - - ch->local_GP->get = 0; - ch->local_GP->put = 0; - ch->remote_GP.get = 0; - ch->remote_GP.put = 0; - ch->w_local_GP.get = 0; - ch->w_local_GP.put = 0; - ch->w_remote_GP.get = 0; - ch->w_remote_GP.put = 0; - ch->next_msg_to_pull = 0; - - if (ch->flags & XPC_C_SETUP) { - ch->flags &= ~XPC_C_SETUP; - - dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", - ch->flags, ch->partid, ch->number); - - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->remote_msgqueue_base); - ch->remote_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; - } -} - -/* * spin_lock_irqsave() is expected to be held on entry. */ static void @@ -717,9 +97,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE)); - if (part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_AS_DEACTIVATING) { /* can't proceed until the other side disengages from us */ - if (xpc_partition_engaged(1UL << ch->partid)) + if (xpc_partition_engaged(ch->partid)) return; } else { @@ -731,7 +111,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_CLOSEREPLY)) { ch->flags |= XPC_C_CLOSEREPLY; - xpc_IPI_send_closereply(ch, irq_flags); + xpc_send_chctl_closereply(ch, irq_flags); } if (!(ch->flags & XPC_C_RCLOSEREPLY)) @@ -740,8 +120,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* wake those waiting for notify completion */ if (atomic_read(&ch->n_to_notify) > 0) { - /* >>> we do callout while holding ch->lock */ - xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put); + /* we do callout while holding ch->lock, callout can't block */ + xpc_notify_senders_of_disconnect(ch); } /* both sides are disconnected now */ @@ -752,10 +132,24 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) spin_lock_irqsave(&ch->lock, *irq_flags); } + DBUG_ON(atomic_read(&ch->n_to_notify) != 0); + /* it's now safe to free the channel's message queues */ - xpc_free_msgqueues(ch); + xpc_teardown_msg_structures(ch); - /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */ + ch->func = NULL; + ch->key = NULL; + ch->entry_size = 0; + ch->local_nentries = 0; + ch->remote_nentries = 0; + ch->kthreads_assigned_limit = 0; + ch->kthreads_idle_limit = 0; + + /* + * Mark the channel disconnected and clear all other flags, including + * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but + * not including XPC_C_WDISCONNECT (if it was set). + */ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); atomic_dec(&part->nchannels_active); @@ -768,15 +162,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & XPC_C_WDISCONNECT) { /* we won't lose the CPU since we're holding ch->lock */ complete(&ch->wdisconnect_wait); - } else if (ch->delayed_IPI_flags) { - if (part->act_state != XPC_P_DEACTIVATING) { - /* time to take action on any delayed IPI flags */ - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number, - ch->delayed_IPI_flags); - spin_unlock(&part->IPI_lock); + } else if (ch->delayed_chctl_flags) { + if (part->act_state != XPC_P_AS_DEACTIVATING) { + /* time to take action on any delayed chctl flags */ + spin_lock(&part->chctl_lock); + part->chctl.flags[ch->number] |= + ch->delayed_chctl_flags; + spin_unlock(&part->chctl_lock); } - ch->delayed_IPI_flags = 0; + ch->delayed_chctl_flags = 0; } } @@ -784,8 +178,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) * Process a change in the channel's remote connection state. */ static void -xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, - u8 IPI_flags) +xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number, + u8 chctl_flags) { unsigned long irq_flags; struct xpc_openclose_args *args = @@ -800,24 +194,24 @@ again: if ((ch->flags & XPC_C_DISCONNECTED) && (ch->flags & XPC_C_WDISCONNECT)) { /* - * Delay processing IPI flags until thread waiting disconnect + * Delay processing chctl flags until thread waiting disconnect * has had a chance to see that the channel is disconnected. */ - ch->delayed_IPI_flags |= IPI_flags; + ch->delayed_chctl_flags |= chctl_flags; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } - if (IPI_flags & XPC_IPI_CLOSEREQUEST) { + if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) { - dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received " + dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received " "from partid=%d, channel=%d\n", args->reason, ch->partid, ch->number); /* * If RCLOSEREQUEST is set, we're probably waiting for * RCLOSEREPLY. We should find it and a ROPENREQUEST packed - * with this RCLOSEREQUEST in the IPI_flags. + * with this RCLOSEREQUEST in the chctl_flags. */ if (ch->flags & XPC_C_RCLOSEREQUEST) { @@ -826,8 +220,8 @@ again: DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY)); DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY); - DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY)); - IPI_flags &= ~XPC_IPI_CLOSEREPLY; + DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY)); + chctl_flags &= ~XPC_CHCTL_CLOSEREPLY; ch->flags |= XPC_C_RCLOSEREPLY; /* both sides have finished disconnecting */ @@ -837,17 +231,15 @@ again: } if (ch->flags & XPC_C_DISCONNECTED) { - if (!(IPI_flags & XPC_IPI_OPENREQUEST)) { - if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, - ch_number) & - XPC_IPI_OPENREQUEST)) { - - DBUG_ON(ch->delayed_IPI_flags != 0); - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch_number, - XPC_IPI_CLOSEREQUEST); - spin_unlock(&part->IPI_lock); + if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) { + if (part->chctl.flags[ch_number] & + XPC_CHCTL_OPENREQUEST) { + + DBUG_ON(ch->delayed_chctl_flags != 0); + spin_lock(&part->chctl_lock); + part->chctl.flags[ch_number] |= + XPC_CHCTL_CLOSEREQUEST; + spin_unlock(&part->chctl_lock); } spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -860,7 +252,7 @@ again: ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST); } - IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY); + chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY); /* * The meaningful CLOSEREQUEST connection state fields are: @@ -878,7 +270,7 @@ again: XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); - DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY); + DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -886,13 +278,13 @@ again: xpc_process_disconnect(ch, &irq_flags); } - if (IPI_flags & XPC_IPI_CLOSEREPLY) { + if (chctl_flags & XPC_CHCTL_CLOSEREPLY) { - dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d," - " channel=%d\n", ch->partid, ch->number); + dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid=" + "%d, channel=%d\n", ch->partid, ch->number); if (ch->flags & XPC_C_DISCONNECTED) { - DBUG_ON(part->act_state != XPC_P_DEACTIVATING); + DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -900,15 +292,14 @@ again: DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); if (!(ch->flags & XPC_C_RCLOSEREQUEST)) { - if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number) - & XPC_IPI_CLOSEREQUEST)) { - - DBUG_ON(ch->delayed_IPI_flags != 0); - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch_number, - XPC_IPI_CLOSEREPLY); - spin_unlock(&part->IPI_lock); + if (part->chctl.flags[ch_number] & + XPC_CHCTL_CLOSEREQUEST) { + + DBUG_ON(ch->delayed_chctl_flags != 0); + spin_lock(&part->chctl_lock); + part->chctl.flags[ch_number] |= + XPC_CHCTL_CLOSEREPLY; + spin_unlock(&part->chctl_lock); } spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -922,21 +313,21 @@ again: } } - if (IPI_flags & XPC_IPI_OPENREQUEST) { + if (chctl_flags & XPC_CHCTL_OPENREQUEST) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, " "local_nentries=%d) received from partid=%d, " - "channel=%d\n", args->msg_size, args->local_nentries, + "channel=%d\n", args->entry_size, args->local_nentries, ch->partid, ch->number); - if (part->act_state == XPC_P_DEACTIVATING || + if (part->act_state == XPC_P_AS_DEACTIVATING || (ch->flags & XPC_C_ROPENREQUEST)) { spin_unlock_irqrestore(&ch->lock, irq_flags); return; } if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { - ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST; + ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -947,10 +338,10 @@ again: /* * The meaningful OPENREQUEST connection state fields are: - * msg_size = size of channel's messages in bytes + * entry_size = size of channel's messages in bytes * local_nentries = remote partition's local_nentries */ - if (args->msg_size == 0 || args->local_nentries == 0) { + if (args->entry_size == 0 || args->local_nentries == 0) { /* assume OPENREQUEST was delayed by mistake */ spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -960,14 +351,14 @@ again: ch->remote_nentries = args->local_nentries; if (ch->flags & XPC_C_OPENREQUEST) { - if (args->msg_size != ch->msg_size) { + if (args->entry_size != ch->entry_size) { XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes, &irq_flags); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } } else { - ch->msg_size = args->msg_size; + ch->entry_size = args->entry_size; XPC_SET_REASON(ch, 0, 0); ch->flags &= ~XPC_C_DISCONNECTED; @@ -978,13 +369,13 @@ again: xpc_process_connect(ch, &irq_flags); } - if (IPI_flags & XPC_IPI_OPENREPLY) { + if (chctl_flags & XPC_CHCTL_OPENREPLY) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, " - "local_nentries=%d, remote_nentries=%d) received from " - "partid=%d, channel=%d\n", args->local_msgqueue_pa, - args->local_nentries, args->remote_nentries, - ch->partid, ch->number); + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa=" + "0x%lx, local_nentries=%d, remote_nentries=%d) " + "received from partid=%d, channel=%d\n", + args->local_msgqueue_pa, args->local_nentries, + args->remote_nentries, ch->partid, ch->number); if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -1012,10 +403,10 @@ again: DBUG_ON(args->remote_nentries == 0); ch->flags |= XPC_C_ROPENREPLY; - ch->remote_msgqueue_pa = args->local_msgqueue_pa; + xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa); if (args->local_nentries < ch->remote_nentries) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new " "remote_nentries=%d, old remote_nentries=%d, " "partid=%d, channel=%d\n", args->local_nentries, ch->remote_nentries, @@ -1024,7 +415,7 @@ again: ch->remote_nentries = args->local_nentries; } if (args->remote_nentries < ch->local_nentries) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new " "local_nentries=%d, old local_nentries=%d, " "partid=%d, channel=%d\n", args->remote_nentries, ch->local_nentries, @@ -1082,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch) ch->local_nentries = registration->nentries; if (ch->flags & XPC_C_ROPENREQUEST) { - if (registration->msg_size != ch->msg_size) { + if (registration->entry_size != ch->entry_size) { /* the local and remote sides aren't the same */ /* @@ -1101,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch) return xpUnequalMsgSizes; } } else { - ch->msg_size = registration->msg_size; + ch->entry_size = registration->entry_size; XPC_SET_REASON(ch, 0, 0); ch->flags &= ~XPC_C_DISCONNECTED; @@ -1114,7 +505,7 @@ xpc_connect_channel(struct xpc_channel *ch) /* initiate the connection */ ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING); - xpc_IPI_send_openrequest(ch, &irq_flags); + xpc_send_chctl_openrequest(ch, &irq_flags); xpc_process_connect(ch, &irq_flags); @@ -1123,152 +514,16 @@ xpc_connect_channel(struct xpc_channel *ch) return xpSuccess; } -/* - * Clear some of the msg flags in the local message queue. - */ -static inline void -xpc_clear_local_msgqueue_flags(struct xpc_channel *ch) -{ - struct xpc_msg *msg; - s64 get; - - get = ch->w_remote_GP.get; - do { - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (get % ch->local_nentries) * - ch->msg_size); - msg->flags = 0; - } while (++get < ch->remote_GP.get); -} - -/* - * Clear some of the msg flags in the remote message queue. - */ -static inline void -xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch) -{ - struct xpc_msg *msg; - s64 put; - - put = ch->w_remote_GP.put; - do { - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + - (put % ch->remote_nentries) * - ch->msg_size); - msg->flags = 0; - } while (++put < ch->remote_GP.put); -} - -static void -xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) -{ - struct xpc_channel *ch = &part->channels[ch_number]; - int nmsgs_sent; - - ch->remote_GP = part->remote_GPs[ch_number]; - - /* See what, if anything, has changed for each connected channel */ - - xpc_msgqueue_ref(ch); - - if (ch->w_remote_GP.get == ch->remote_GP.get && - ch->w_remote_GP.put == ch->remote_GP.put) { - /* nothing changed since GPs were last pulled */ - xpc_msgqueue_deref(ch); - return; - } - - if (!(ch->flags & XPC_C_CONNECTED)) { - xpc_msgqueue_deref(ch); - return; - } - - /* - * First check to see if messages recently sent by us have been - * received by the other side. (The remote GET value will have - * changed since we last looked at it.) - */ - - if (ch->w_remote_GP.get != ch->remote_GP.get) { - - /* - * We need to notify any senders that want to be notified - * that their sent messages have been received by their - * intended recipients. We need to do this before updating - * w_remote_GP.get so that we don't allocate the same message - * queue entries prematurely (see xpc_allocate_msg()). - */ - if (atomic_read(&ch->n_to_notify) > 0) { - /* - * Notify senders that messages sent have been - * received and delivered by the other side. - */ - xpc_notify_senders(ch, xpMsgDelivered, - ch->remote_GP.get); - } - - /* - * Clear msg->flags in previously sent messages, so that - * they're ready for xpc_allocate_msg(). - */ - xpc_clear_local_msgqueue_flags(ch); - - ch->w_remote_GP.get = ch->remote_GP.get; - - dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " - "channel=%d\n", ch->w_remote_GP.get, ch->partid, - ch->number); - - /* - * If anyone was waiting for message queue entries to become - * available, wake them up. - */ - if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) - wake_up(&ch->msg_allocate_wq); - } - - /* - * Now check for newly sent messages by the other side. (The remote - * PUT value will have changed since we last looked at it.) - */ - - if (ch->w_remote_GP.put != ch->remote_GP.put) { - /* - * Clear msg->flags in previously received messages, so that - * they're ready for xpc_get_deliverable_msg(). - */ - xpc_clear_remote_msgqueue_flags(ch); - - ch->w_remote_GP.put = ch->remote_GP.put; - - dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " - "channel=%d\n", ch->w_remote_GP.put, ch->partid, - ch->number); - - nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get; - if (nmsgs_sent > 0) { - dev_dbg(xpc_chan, "msgs waiting to be copied and " - "delivered=%d, partid=%d, channel=%d\n", - nmsgs_sent, ch->partid, ch->number); - - if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) - xpc_activate_kthreads(ch, nmsgs_sent); - } - } - - xpc_msgqueue_deref(ch); -} - void -xpc_process_channel_activity(struct xpc_partition *part) +xpc_process_sent_chctl_flags(struct xpc_partition *part) { unsigned long irq_flags; - u64 IPI_amo, IPI_flags; + union xpc_channel_ctl_flags chctl; struct xpc_channel *ch; int ch_number; u32 ch_flags; - IPI_amo = xpc_get_IPI_flags(part); + chctl.all_flags = xpc_get_chctl_all_flags(part); /* * Initiate channel connections for registered channels. @@ -1281,14 +536,14 @@ xpc_process_channel_activity(struct xpc_partition *part) ch = &part->channels[ch_number]; /* - * Process any open or close related IPI flags, and then deal + * Process any open or close related chctl flags, and then deal * with connecting or disconnecting the channel as required. */ - IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number); - - if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags)) - xpc_process_openclose_IPI(part, ch_number, IPI_flags); + if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) { + xpc_process_openclose_chctl_flags(part, ch_number, + chctl.flags[ch_number]); + } ch_flags = ch->flags; /* need an atomic snapshot of flags */ @@ -1299,7 +554,7 @@ xpc_process_channel_activity(struct xpc_partition *part) continue; } - if (part->act_state == XPC_P_DEACTIVATING) + if (part->act_state == XPC_P_AS_DEACTIVATING) continue; if (!(ch_flags & XPC_C_CONNECTED)) { @@ -1315,13 +570,13 @@ xpc_process_channel_activity(struct xpc_partition *part) } /* - * Process any message related IPI flags, this may involve the - * activation of kthreads to deliver any pending messages sent - * from the other partition. + * Process any message related chctl flags, this may involve + * the activation of kthreads to deliver any pending messages + * sent from the other partition. */ - if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags)) - xpc_process_msg_IPI(part, ch_number); + if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS) + xpc_process_msg_chctl_flags(part, ch_number); } } @@ -1369,59 +624,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason) } /* - * Teardown the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. - */ -void -xpc_teardown_infrastructure(struct xpc_partition *part) -{ - short partid = XPC_PARTID(part); - - /* - * We start off by making this partition inaccessible to local - * processes by marking it as no longer setup. Then we make it - * inaccessible to remote processes by clearing the XPC per partition - * specific variable's magic # (which indicates that these variables - * are no longer valid) and by ignoring all XPC notify IPIs sent to - * this partition. - */ - - DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); - DBUG_ON(atomic_read(&part->nchannels_active) != 0); - DBUG_ON(part->setup_state != XPC_P_SETUP); - part->setup_state = XPC_P_WTEARDOWN; - - xpc_vars_part[partid].magic = 0; - - free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); - - /* - * Before proceeding with the teardown we have to wait until all - * existing references cease. - */ - wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); - - /* now we can begin tearing down the infrastructure */ - - part->setup_state = XPC_P_TORNDOWN; - - /* in case we've still got outstanding timers registered... */ - del_timer_sync(&part->dropped_IPI_timer); - - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - part->local_IPI_amo_va = NULL; -} - -/* * Called by XP at the time of channel connection registration to cause * XPC to establish connections to all currently active partitions. */ @@ -1432,9 +634,9 @@ xpc_initiate_connect(int ch_number) struct xpc_partition *part; struct xpc_channel *ch; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_part_ref(part)) { @@ -1488,10 +690,10 @@ xpc_initiate_disconnect(int ch_number) struct xpc_partition *part; struct xpc_channel *ch; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); /* initiate the channel disconnect for every active partition */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_part_ref(part)) { @@ -1550,7 +752,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - xpc_IPI_send_closerequest(ch, irq_flags); + xpc_send_chctl_closerequest(ch, irq_flags); if (channel_was_connected) ch->flags |= XPC_C_WASCONNECTED; @@ -1598,7 +800,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason) * Wait for a message entry to become available for the specified channel, * but don't wait any longer than 1 jiffy. */ -static enum xp_retval +enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *ch) { enum xp_retval ret; @@ -1625,315 +827,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch) } /* - * Allocate an entry for a message from the message queue associated with the - * specified channel. - */ -static enum xp_retval -xpc_allocate_msg(struct xpc_channel *ch, u32 flags, - struct xpc_msg **address_of_msg) -{ - struct xpc_msg *msg; - enum xp_retval ret; - s64 put; - - /* this reference will be dropped in xpc_send_msg() */ - xpc_msgqueue_ref(ch); - - if (ch->flags & XPC_C_DISCONNECTING) { - xpc_msgqueue_deref(ch); - return ch->reason; - } - if (!(ch->flags & XPC_C_CONNECTED)) { - xpc_msgqueue_deref(ch); - return xpNotConnected; - } - - /* - * Get the next available message entry from the local message queue. - * If none are available, we'll make sure that we grab the latest - * GP values. - */ - ret = xpTimeout; - - while (1) { - - put = ch->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ - if (put - ch->w_remote_GP.get < ch->local_nentries) { - - /* There are available message entries. We need to try - * to secure one for ourselves. We'll do this by trying - * to increment w_local_GP.put as long as someone else - * doesn't beat us to it. If they do, we'll have to - * try again. - */ - if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) { - /* we got the entry referenced by put */ - break; - } - continue; /* try again */ - } - - /* - * There aren't any available msg entries at this time. - * - * In waiting for a message entry to become available, - * we set a timeout in case the other side is not - * sending completion IPIs. This lets us fake an IPI - * that will cause the IPI handler to fetch the latest - * GP values as if an IPI was sent by the other side. - */ - if (ret == xpTimeout) - xpc_IPI_send_local_msgrequest(ch); - - if (flags & XPC_NOWAIT) { - xpc_msgqueue_deref(ch); - return xpNoWait; - } - - ret = xpc_allocate_msg_wait(ch); - if (ret != xpInterrupted && ret != xpTimeout) { - xpc_msgqueue_deref(ch); - return ret; - } - } - - /* get the message's address and initialize it */ - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (put % ch->local_nentries) * ch->msg_size); - - DBUG_ON(msg->flags != 0); - msg->number = put; - - dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", put + 1, - (void *)msg, msg->number, ch->partid, ch->number); - - *address_of_msg = msg; - - return xpSuccess; -} - -/* - * Allocate an entry for a message from the message queue associated with the - * specified channel. NOTE that this routine can sleep waiting for a message - * entry to become available. To not sleep, pass in the XPC_NOWAIT flag. + * Send a message that contains the user's payload on the specified channel + * connected to the specified partition. * - * Arguments: + * NOTE that this routine can sleep waiting for a message entry to become + * available. To not sleep, pass in the XPC_NOWAIT flag. * - * partid - ID of partition to which the channel is connected. - * ch_number - channel #. - * flags - see xpc.h for valid flags. - * payload - address of the allocated payload area pointer (filled in on - * return) in which the user-defined message is constructed. - */ -enum xp_retval -xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload) -{ - struct xpc_partition *part = &xpc_partitions[partid]; - enum xp_retval ret = xpUnknownReason; - struct xpc_msg *msg = NULL; - - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); - DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - - *payload = NULL; - - if (xpc_part_ref(part)) { - ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg); - xpc_part_deref(part); - - if (msg != NULL) - *payload = &msg->payload; - } - - return ret; -} - -/* - * Now we actually send the messages that are ready to be sent by advancing - * the local message queue's Put value and then send an IPI to the recipient - * partition. - */ -static void -xpc_send_msgs(struct xpc_channel *ch, s64 initial_put) -{ - struct xpc_msg *msg; - s64 put = initial_put + 1; - int send_IPI = 0; - - while (1) { - - while (1) { - if (put == ch->w_local_GP.put) - break; - - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (put % ch->local_nentries) * - ch->msg_size); - - if (!(msg->flags & XPC_M_READY)) - break; - - put++; - } - - if (put == initial_put) { - /* nothing's changed */ - break; - } - - if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) != - initial_put) { - /* someone else beat us to it */ - DBUG_ON(ch->local_GP->put < initial_put); - break; - } - - /* we just set the new value of local_GP->put */ - - dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " - "channel=%d\n", put, ch->partid, ch->number); - - send_IPI = 1; - - /* - * We need to ensure that the message referenced by - * local_GP->put is not XPC_M_READY or that local_GP->put - * equals w_local_GP.put, so we'll go have a look. - */ - initial_put = put; - } - - if (send_IPI) - xpc_IPI_send_msgrequest(ch); -} - -/* - * Common code that does the actual sending of the message by advancing the - * local message queue's Put value and sends an IPI to the partition the - * message is being sent to. - */ -static enum xp_retval -xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, - xpc_notify_func func, void *key) -{ - enum xp_retval ret = xpSuccess; - struct xpc_notify *notify = notify; - s64 put, msg_number = msg->number; - - DBUG_ON(notify_type == XPC_N_CALL && func == NULL); - DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) != - msg_number % ch->local_nentries); - DBUG_ON(msg->flags & XPC_M_READY); - - if (ch->flags & XPC_C_DISCONNECTING) { - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ch->reason; - } - - if (notify_type != 0) { - /* - * Tell the remote side to send an ACK interrupt when the - * message has been delivered. - */ - msg->flags |= XPC_M_INTERRUPT; - - atomic_inc(&ch->n_to_notify); - - notify = &ch->notify_queue[msg_number % ch->local_nentries]; - notify->func = func; - notify->key = key; - notify->type = notify_type; - - /* >>> is a mb() needed here? */ - - if (ch->flags & XPC_C_DISCONNECTING) { - /* - * An error occurred between our last error check and - * this one. We will try to clear the type field from - * the notify entry. If we succeed then - * xpc_disconnect_channel() didn't already process - * the notify entry. - */ - if (cmpxchg(¬ify->type, notify_type, 0) == - notify_type) { - atomic_dec(&ch->n_to_notify); - ret = ch->reason; - } - - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ret; - } - } - - msg->flags |= XPC_M_READY; - - /* - * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->put. - */ - mb(); - - /* see if the message is next in line to be sent, if so send it */ - - put = ch->local_GP->put; - if (put == msg_number) - xpc_send_msgs(ch, put); - - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ret; -} - -/* - * Send a message previously allocated using xpc_initiate_allocate() on the - * specified channel connected to the specified partition. - * - * This routine will not wait for the message to be received, nor will - * notification be given when it does happen. Once this routine has returned - * the message entry allocated via xpc_initiate_allocate() is no longer - * accessable to the caller. - * - * This routine, although called by users, does not call xpc_part_ref() to - * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). + * Once sent, this routine will not wait for the message to be received, nor + * will notification be given when it does happen. * * Arguments: * * partid - ID of partition to which the channel is connected. * ch_number - channel # to send message on. - * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * flags - see xp.h for valid flags. + * payload - pointer to the payload which is to be sent. + * payload_size - size of the payload in bytes. */ enum xp_retval -xpc_initiate_send(short partid, int ch_number, void *payload) +xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size) { struct xpc_partition *part = &xpc_partitions[partid]; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - enum xp_retval ret; + enum xp_retval ret = xpUnknownReason; - dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload, partid, ch_number); - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - DBUG_ON(msg == NULL); + DBUG_ON(payload == NULL); - ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL); + if (xpc_part_ref(part)) { + ret = xpc_send_payload(&part->channels[ch_number], flags, + payload, payload_size, 0, NULL, NULL); + xpc_part_deref(part); + } return ret; } /* - * Send a message previously allocated using xpc_initiate_allocate on the - * specified channel connected to the specified partition. + * Send a message that contains the user's payload on the specified channel + * connected to the specified partition. * - * This routine will not wait for the message to be sent. Once this routine - * has returned the message entry allocated via xpc_initiate_allocate() is no - * longer accessable to the caller. + * NOTE that this routine can sleep waiting for a message entry to become + * available. To not sleep, pass in the XPC_NOWAIT flag. + * + * This routine will not wait for the message to be sent or received. * * Once the remote end of the channel has received the message, the function * passed as an argument to xpc_initiate_send_notify() will be called. This @@ -1943,158 +884,51 @@ xpc_initiate_send(short partid, int ch_number, void *payload) * * If this routine returns an error, the caller's function will NOT be called. * - * This routine, although called by users, does not call xpc_part_ref() to - * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). - * * Arguments: * * partid - ID of partition to which the channel is connected. * ch_number - channel # to send message on. - * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * flags - see xp.h for valid flags. + * payload - pointer to the payload which is to be sent. + * payload_size - size of the payload in bytes. * func - function to call with asynchronous notification of message * receipt. THIS FUNCTION MUST BE NON-BLOCKING. * key - user-defined key to be passed to the function when it's called. */ enum xp_retval -xpc_initiate_send_notify(short partid, int ch_number, void *payload, - xpc_notify_func func, void *key) +xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size, xpc_notify_func func, void *key) { struct xpc_partition *part = &xpc_partitions[partid]; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - enum xp_retval ret; + enum xp_retval ret = xpUnknownReason; - dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload, partid, ch_number); - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - DBUG_ON(msg == NULL); + DBUG_ON(payload == NULL); DBUG_ON(func == NULL); - ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL, - func, key); - return ret; -} - -static struct xpc_msg * -xpc_pull_remote_msg(struct xpc_channel *ch, s64 get) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - struct xpc_msg *remote_msg, *msg; - u32 msg_index, nmsgs; - u64 msg_offset; - enum xp_retval ret; - - if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) { - /* we were interrupted by a signal */ - return NULL; - } - - while (get >= ch->next_msg_to_pull) { - - /* pull as many messages as are ready and able to be pulled */ - - msg_index = ch->next_msg_to_pull % ch->remote_nentries; - - DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put); - nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull; - if (msg_index + nmsgs > ch->remote_nentries) { - /* ignore the ones that wrap the msg queue for now */ - nmsgs = ch->remote_nentries - msg_index; - } - - msg_offset = msg_index * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa + - msg_offset); - - ret = xpc_pull_remote_cachelines(part, msg, remote_msg, - nmsgs * ch->msg_size); - if (ret != xpSuccess) { - - dev_dbg(xpc_chan, "failed to pull %d msgs starting with" - " msg %ld from partition %d, channel=%d, " - "ret=%d\n", nmsgs, ch->next_msg_to_pull, - ch->partid, ch->number, ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - - mutex_unlock(&ch->msg_to_pull_mutex); - return NULL; - } - - ch->next_msg_to_pull += nmsgs; + if (xpc_part_ref(part)) { + ret = xpc_send_payload(&part->channels[ch_number], flags, + payload, payload_size, XPC_N_CALL, func, + key); + xpc_part_deref(part); } - - mutex_unlock(&ch->msg_to_pull_mutex); - - /* return the message we were looking for */ - msg_offset = (get % ch->remote_nentries) * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - - return msg; -} - -/* - * Get a message to be delivered. - */ -static struct xpc_msg * -xpc_get_deliverable_msg(struct xpc_channel *ch) -{ - struct xpc_msg *msg = NULL; - s64 get; - - do { - if (ch->flags & XPC_C_DISCONNECTING) - break; - - get = ch->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ - if (get == ch->w_remote_GP.put) - break; - - /* There are messages waiting to be pulled and delivered. - * We need to try to secure one for ourselves. We'll do this - * by trying to increment w_local_GP.get and hope that no one - * else beats us to it. If they do, we'll we'll simply have - * to try again for the next one. - */ - - if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) { - /* we got the entry referenced by get */ - - dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " - "partid=%d, channel=%d\n", get + 1, - ch->partid, ch->number); - - /* pull the message from the remote partition */ - - msg = xpc_pull_remote_msg(ch, get); - - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY)); - - break; - } - - } while (1); - - return msg; + return ret; } /* - * Deliver a message to its intended recipient. + * Deliver a message's payload to its intended recipient. */ void -xpc_deliver_msg(struct xpc_channel *ch) +xpc_deliver_payload(struct xpc_channel *ch) { - struct xpc_msg *msg; + void *payload; - msg = xpc_get_deliverable_msg(ch); - if (msg != NULL) { + payload = xpc_get_deliverable_payload(ch); + if (payload != NULL) { /* * This ref is taken to protect the payload itself from being @@ -2106,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch) atomic_inc(&ch->kthreads_active); if (ch->func != NULL) { - dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg->number, ch->partid, + dev_dbg(xpc_chan, "ch->func() called, payload=0x%p " + "partid=%d channel=%d\n", payload, ch->partid, ch->number); /* deliver the message to its intended recipient */ - ch->func(xpMsgReceived, ch->partid, ch->number, - &msg->payload, ch->key); + ch->func(xpMsgReceived, ch->partid, ch->number, payload, + ch->key); - dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg->number, ch->partid, + dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p " + "partid=%d channel=%d\n", payload, ch->partid, ch->number); } @@ -2126,118 +958,31 @@ xpc_deliver_msg(struct xpc_channel *ch) } /* - * Now we actually acknowledge the messages that have been delivered and ack'd - * by advancing the cached remote message queue's Get value and if requested - * send an IPI to the message sender's partition. - */ -static void -xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) -{ - struct xpc_msg *msg; - s64 get = initial_get + 1; - int send_IPI = 0; - - while (1) { - - while (1) { - if (get == ch->w_local_GP.get) - break; - - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + - (get % ch->remote_nentries) * - ch->msg_size); - - if (!(msg->flags & XPC_M_DONE)) - break; - - msg_flags |= msg->flags; - get++; - } - - if (get == initial_get) { - /* nothing's changed */ - break; - } - - if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) != - initial_get) { - /* someone else beat us to it */ - DBUG_ON(ch->local_GP->get <= initial_get); - break; - } - - /* we just set the new value of local_GP->get */ - - dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " - "channel=%d\n", get, ch->partid, ch->number); - - send_IPI = (msg_flags & XPC_M_INTERRUPT); - - /* - * We need to ensure that the message referenced by - * local_GP->get is not XPC_M_DONE or that local_GP->get - * equals w_local_GP.get, so we'll go have a look. - */ - initial_get = get; - } - - if (send_IPI) - xpc_IPI_send_msgrequest(ch); -} - -/* - * Acknowledge receipt of a delivered message. - * - * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition - * that sent the message. + * Acknowledge receipt of a delivered message's payload. * * This function, although called by users, does not call xpc_part_ref() to * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg(). + * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload(). * * Arguments: * * partid - ID of partition to which the channel is connected. * ch_number - channel # message received on. * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * xpc_initiate_send() or xpc_initiate_send_notify(). */ void xpc_initiate_received(short partid, int ch_number, void *payload) { struct xpc_partition *part = &xpc_partitions[partid]; struct xpc_channel *ch; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - s64 get, msg_number = msg->number; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); ch = &part->channels[ch_number]; + xpc_received_payload(ch, payload); - dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg_number, ch->partid, ch->number); - - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) != - msg_number % ch->remote_nentries); - DBUG_ON(msg->flags & XPC_M_DONE); - - msg->flags |= XPC_M_DONE; - - /* - * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->get. - */ - mb(); - - /* - * See if this message is next in line to be acknowledged as having - * been delivered. - */ - get = ch->local_GP->get; - if (get == msg_number) - xpc_acknowledge_msgs(ch, get, msg->flags); - - /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg() */ + /* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */ xpc_msgqueue_deref(ch); } diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index c3b4227f48a5..46325fc84811 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -25,37 +25,31 @@ * * Caveats: * - * . We currently have no way to determine which nasid an IPI came - * from. Thus, xpc_IPI_send() does a remote AMO write followed by - * an IPI. The AMO indicates where data is to be pulled from, so - * after the IPI arrives, the remote partition checks the AMO word. - * The IPI can actually arrive before the AMO however, so other code - * must periodically check for this case. Also, remote AMO operations - * do not reliably time out. Thus we do a remote PIO read solely to - * know whether the remote partition is down and whether we should - * stop sending IPIs to it. This remote PIO read operation is set up - * in a special nofault region so SAL knows to ignore (and cleanup) - * any errors due to the remote AMO write, PIO read, and/or PIO - * write operations. + * . Currently on sn2, we have no way to determine which nasid an IRQ + * came from. Thus, xpc_send_IRQ_sn2() does a remote amo write + * followed by an IPI. The amo indicates where data is to be pulled + * from, so after the IPI arrives, the remote partition checks the amo + * word. The IPI can actually arrive before the amo however, so other + * code must periodically check for this case. Also, remote amo + * operations do not reliably time out. Thus we do a remote PIO read + * solely to know whether the remote partition is down and whether we + * should stop sending IPIs to it. This remote PIO read operation is + * set up in a special nofault region so SAL knows to ignore (and + * cleanup) any errors due to the remote amo write, PIO read, and/or + * PIO write operations. * * If/when new hardware solves this IPI problem, we should abandon * the current approach. * */ -#include <linux/kernel.h> #include <linux/module.h> -#include <linux/init.h> -#include <linux/cache.h> -#include <linux/interrupt.h> +#include <linux/sysctl.h> +#include <linux/device.h> #include <linux/delay.h> #include <linux/reboot.h> -#include <linux/completion.h> #include <linux/kdebug.h> #include <linux/kthread.h> -#include <linux/uaccess.h> -#include <asm/sn/intr.h> -#include <asm/sn/sn_sal.h> #include "xpc.h" /* define two XPC debug device structures to be used with dev_dbg() et al */ @@ -89,9 +83,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; static int xpc_hb_check_min_interval = 10; static int xpc_hb_check_max_interval = 120; -int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; -static int xpc_disengage_request_min_timelimit; /* = 0 */ -static int xpc_disengage_request_max_timelimit = 120; +int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT; +static int xpc_disengage_min_timelimit; /* = 0 */ +static int xpc_disengage_max_timelimit = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { @@ -124,14 +118,14 @@ static ctl_table xpc_sys_xpc_dir[] = { .child = xpc_sys_xpc_hb_dir}, { .ctl_name = CTL_UNNUMBERED, - .procname = "disengage_request_timelimit", - .data = &xpc_disengage_request_timelimit, + .procname = "disengage_timelimit", + .data = &xpc_disengage_timelimit, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &proc_dointvec_minmax, .strategy = &sysctl_intvec, - .extra1 = &xpc_disengage_request_min_timelimit, - .extra2 = &xpc_disengage_request_max_timelimit}, + .extra1 = &xpc_disengage_min_timelimit, + .extra2 = &xpc_disengage_max_timelimit}, {} }; static ctl_table xpc_sys_dir[] = { @@ -144,16 +138,19 @@ static ctl_table xpc_sys_dir[] = { }; static struct ctl_table_header *xpc_sysctl; -/* non-zero if any remote partition disengage request was timed out */ -int xpc_disengage_request_timedout; +/* non-zero if any remote partition disengage was timed out */ +int xpc_disengage_timedout; -/* #of IRQs received */ -static atomic_t xpc_act_IRQ_rcvd; +/* #of activate IRQs received and not yet processed */ +int xpc_activate_IRQ_rcvd; +DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock); /* IRQ handler notifies this wait queue on receipt of an IRQ */ -static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); +DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq); static unsigned long xpc_hb_check_timeout; +static struct timer_list xpc_hb_timer; +void *xpc_heartbeating_to_mask; /* notification that the xpc_hb_checker thread has exited */ static DECLARE_COMPLETION(xpc_hb_checker_exited); @@ -161,8 +158,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited); /* notification that the xpc_discovery thread has exited */ static DECLARE_COMPLETION(xpc_discovery_exited); -static struct timer_list xpc_hb_timer; - static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); @@ -175,31 +170,76 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; +int (*xpc_setup_partitions_sn) (void); +enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, + unsigned long *rp_pa, + size_t *len); +int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp); +void (*xpc_heartbeat_init) (void); +void (*xpc_heartbeat_exit) (void); +void (*xpc_increment_heartbeat) (void); +void (*xpc_offline_heartbeat) (void); +void (*xpc_online_heartbeat) (void); +enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part); + +enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); +void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); +u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); +enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch); +void (*xpc_teardown_msg_structures) (struct xpc_channel *ch); +void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); +int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch); +void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch); + +void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, + unsigned long remote_rp_pa, + int nasid); +void (*xpc_request_partition_reactivation) (struct xpc_partition *part); +void (*xpc_request_partition_deactivation) (struct xpc_partition *part); +void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); + +void (*xpc_process_activate_IRQ_rcvd) (void); +enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part); +void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part); + +void (*xpc_indicate_partition_engaged) (struct xpc_partition *part); +int (*xpc_partition_engaged) (short partid); +int (*xpc_any_partition_engaged) (void); +void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part); +void (*xpc_assume_partition_disengaged) (short partid); + +void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_chctl_closereply) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, + unsigned long *irq_flags); + +void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, + unsigned long msgqueue_pa); + +enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags, + void *payload, u16 payload_size, + u8 notify_type, xpc_notify_func func, + void *key); +void (*xpc_received_payload) (struct xpc_channel *ch, void *payload); + /* - * Timer function to enforce the timelimit on the partition disengage request. + * Timer function to enforce the timelimit on the partition disengage. */ static void -xpc_timeout_partition_disengage_request(unsigned long data) +xpc_timeout_partition_disengage(unsigned long data) { struct xpc_partition *part = (struct xpc_partition *)data; - DBUG_ON(time_before(jiffies, part->disengage_request_timeout)); + DBUG_ON(time_is_after_jiffies(part->disengage_timeout)); (void)xpc_partition_disengaged(part); - DBUG_ON(part->disengage_request_timeout != 0); - DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); -} - -/* - * Notify the heartbeat check thread that an IRQ has been received. - */ -static irqreturn_t -xpc_act_IRQ_handler(int irq, void *dev_id) -{ - atomic_inc(&xpc_act_IRQ_rcvd); - wake_up_interruptible(&xpc_act_IRQ_wq); - return IRQ_HANDLED; + DBUG_ON(part->disengage_timeout != 0); + DBUG_ON(xpc_partition_engaged(XPC_PARTID(part))); } /* @@ -210,15 +250,63 @@ xpc_act_IRQ_handler(int irq, void *dev_id) static void xpc_hb_beater(unsigned long dummy) { - xpc_vars->heartbeat++; + xpc_increment_heartbeat(); - if (time_after_eq(jiffies, xpc_hb_check_timeout)) - wake_up_interruptible(&xpc_act_IRQ_wq); + if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) + wake_up_interruptible(&xpc_activate_IRQ_wq); xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); add_timer(&xpc_hb_timer); } +static void +xpc_start_hb_beater(void) +{ + xpc_heartbeat_init(); + init_timer(&xpc_hb_timer); + xpc_hb_timer.function = xpc_hb_beater; + xpc_hb_beater(0); +} + +static void +xpc_stop_hb_beater(void) +{ + del_timer_sync(&xpc_hb_timer); + xpc_heartbeat_exit(); +} + +/* + * At periodic intervals, scan through all active partitions and ensure + * their heartbeat is still active. If not, the partition is deactivated. + */ +static void +xpc_check_remote_hb(void) +{ + struct xpc_partition *part; + short partid; + enum xp_retval ret; + + for (partid = 0; partid < xp_max_npartitions; partid++) { + + if (xpc_exiting) + break; + + if (partid == xp_partition_id) + continue; + + part = &xpc_partitions[partid]; + + if (part->act_state == XPC_P_AS_INACTIVE || + part->act_state == XPC_P_AS_DEACTIVATING) { + continue; + } + + ret = xpc_get_remote_heartbeat(part); + if (ret != xpSuccess) + XPC_DEACTIVATE_PARTITION(part, ret); + } +} + /* * This thread is responsible for nearly all of the partition * activation/deactivation. @@ -226,8 +314,6 @@ xpc_hb_beater(unsigned long dummy) static int xpc_hb_checker(void *ignore) { - int last_IRQ_count = 0; - int new_IRQ_count; int force_IRQ = 0; /* this thread was marked active by xpc_hb_init() */ @@ -236,56 +322,49 @@ xpc_hb_checker(void *ignore) /* set our heartbeating to other partitions into motion */ xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); - xpc_hb_beater(0); + xpc_start_hb_beater(); while (!xpc_exiting) { dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " "been received\n", (int)(xpc_hb_check_timeout - jiffies), - atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); + xpc_activate_IRQ_rcvd); /* checking of remote heartbeats is skewed by IRQ handling */ - if (time_after_eq(jiffies, xpc_hb_check_timeout)) { + if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) { + xpc_hb_check_timeout = jiffies + + (xpc_hb_check_interval * HZ); + dev_dbg(xpc_part, "checking remote heartbeats\n"); xpc_check_remote_hb(); /* - * We need to periodically recheck to ensure no - * IPI/AMO pairs have been missed. That check - * must always reset xpc_hb_check_timeout. + * On sn2 we need to periodically recheck to ensure no + * IRQ/amo pairs have been missed. */ - force_IRQ = 1; + if (is_shub()) + force_IRQ = 1; } /* check for outstanding IRQs */ - new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); - if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { + if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) { force_IRQ = 0; - - dev_dbg(xpc_part, "found an IRQ to process; will be " - "resetting xpc_hb_check_timeout\n"); - - last_IRQ_count += xpc_identify_act_IRQ_sender(); - if (last_IRQ_count < new_IRQ_count) { - /* retry once to help avoid missing AMO */ - (void)xpc_identify_act_IRQ_sender(); - } - last_IRQ_count = new_IRQ_count; - - xpc_hb_check_timeout = jiffies + - (xpc_hb_check_interval * HZ); + dev_dbg(xpc_part, "processing activate IRQs " + "received\n"); + xpc_process_activate_IRQ_rcvd(); } /* wait for IRQ or timeout */ - (void)wait_event_interruptible(xpc_act_IRQ_wq, - (last_IRQ_count < - atomic_read(&xpc_act_IRQ_rcvd) - || time_after_eq(jiffies, - xpc_hb_check_timeout) || + (void)wait_event_interruptible(xpc_activate_IRQ_wq, + (time_is_before_eq_jiffies( + xpc_hb_check_timeout) || + xpc_activate_IRQ_rcvd > 0 || xpc_exiting)); } + xpc_stop_hb_beater(); + dev_dbg(xpc_part, "heartbeat checker is exiting\n"); /* mark this thread as having exited */ @@ -311,37 +390,8 @@ xpc_initiate_discovery(void *ignore) } /* - * Establish first contact with the remote partititon. This involves pulling - * the XPC per partition variables from the remote partition and waiting for - * the remote partition to pull ours. - */ -static enum xp_retval -xpc_make_first_contact(struct xpc_partition *part) -{ - enum xp_retval ret; - - while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) { - if (ret != xpRetry) { - XPC_DEACTIVATE_PARTITION(part, ret); - return ret; - } - - dev_dbg(xpc_chan, "waiting to make first contact with " - "partition %d\n", XPC_PARTID(part)); - - /* wait a 1/4 of a second or so */ - (void)msleep_interruptible(250); - - if (part->act_state == XPC_P_DEACTIVATING) - return part->reason; - } - - return xpc_mark_partition_active(part); -} - -/* * The first kthread assigned to a newly activated partition is the one - * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to + * created by XPC HB with which it calls xpc_activating(). XPC hangs on to * that kthread until the partition is brought down, at which time that kthread * returns back to XPC HB. (The return of that kthread will signify to XPC HB * that XPC has dismantled all communication infrastructure for the associated @@ -354,11 +404,11 @@ xpc_make_first_contact(struct xpc_partition *part) static void xpc_channel_mgr(struct xpc_partition *part) { - while (part->act_state != XPC_P_DEACTIVATING || + while (part->act_state != XPC_P_AS_DEACTIVATING || atomic_read(&part->nchannels_active) > 0 || !xpc_partition_disengaged(part)) { - xpc_process_channel_activity(part); + xpc_process_sent_chctl_flags(part); /* * Wait until we've been requested to activate kthreads or @@ -376,8 +426,8 @@ xpc_channel_mgr(struct xpc_partition *part) atomic_dec(&part->channel_mgr_requests); (void)wait_event_interruptible(part->channel_mgr_wq, (atomic_read(&part->channel_mgr_requests) > 0 || - part->local_IPI_amo != 0 || - (part->act_state == XPC_P_DEACTIVATING && + part->chctl.all_flags != 0 || + (part->act_state == XPC_P_AS_DEACTIVATING && atomic_read(&part->nchannels_active) == 0 && xpc_partition_disengaged(part)))); atomic_set(&part->channel_mgr_requests, 1); @@ -385,47 +435,163 @@ xpc_channel_mgr(struct xpc_partition *part) } /* - * When XPC HB determines that a partition has come up, it will create a new - * kthread and that kthread will call this function to attempt to set up the - * basic infrastructure used for Cross Partition Communication with the newly - * upped partition. - * - * The kthread that was created by XPC HB and which setup the XPC - * infrastructure will remain assigned to the partition until the partition - * goes down. At which time the kthread will teardown the XPC infrastructure - * and then exit. - * - * XPC HB will put the remote partition's XPC per partition specific variables - * physical address into xpc_partitions[partid].remote_vars_part_pa prior to - * calling xpc_partition_up(). + * Guarantee that the kzalloc'd memory is cacheline aligned. */ -static void -xpc_partition_up(struct xpc_partition *part) +void * +xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kzalloc will give us cachline aligned memory by default */ + *base = kzalloc(size, flags); + if (*base == NULL) + return NULL; + + if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) + return *base; + + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kzalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) + return NULL; + + return (void *)L1_CACHE_ALIGN((u64)*base); +} + +/* + * Setup the channel structures necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static enum xp_retval +xpc_setup_ch_structures(struct xpc_partition *part) { + enum xp_retval ret; + int ch_number; + struct xpc_channel *ch; + short partid = XPC_PARTID(part); + + /* + * Allocate all of the channel structures as a contiguous chunk of + * memory. + */ DBUG_ON(part->channels != NULL); + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, + GFP_KERNEL); + if (part->channels == NULL) { + dev_err(xpc_chan, "can't get memory for channels\n"); + return xpNoMemory; + } - dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); + /* allocate the remote open and close args */ - if (xpc_setup_infrastructure(part) != xpSuccess) - return; + part->remote_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, &part-> + remote_openclose_args_base); + if (part->remote_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for remote connect args\n"); + ret = xpNoMemory; + goto out_1; + } + + part->chctl.all_flags = 0; + spin_lock_init(&part->chctl_lock); + + atomic_set(&part->channel_mgr_requests, 1); + init_waitqueue_head(&part->channel_mgr_wq); + + part->nchannels = XPC_MAX_NCHANNELS; + + atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + ch->partid = partid; + ch->number = ch_number; + ch->flags = XPC_C_DISCONNECTED; + + atomic_set(&ch->kthreads_assigned, 0); + atomic_set(&ch->kthreads_idle, 0); + atomic_set(&ch->kthreads_active, 0); + + atomic_set(&ch->references, 0); + atomic_set(&ch->n_to_notify, 0); + + spin_lock_init(&ch->lock); + init_completion(&ch->wdisconnect_wait); + + atomic_set(&ch->n_on_msg_allocate_wq, 0); + init_waitqueue_head(&ch->msg_allocate_wq); + init_waitqueue_head(&ch->idle_wq); + } + + ret = xpc_setup_ch_structures_sn(part); + if (ret != xpSuccess) + goto out_2; + + /* + * With the setting of the partition setup_state to XPC_P_SS_SETUP, + * we're declaring that this partition is ready to go. + */ + part->setup_state = XPC_P_SS_SETUP; + + return xpSuccess; + + /* setup of ch structures failed */ +out_2: + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; +out_1: + kfree(part->channels); + part->channels = NULL; + return ret; +} + +/* + * Teardown the channel structures necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static void +xpc_teardown_ch_structures(struct xpc_partition *part) +{ + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); + DBUG_ON(atomic_read(&part->nchannels_active) != 0); /* - * The kthread that XPC HB called us with will become the - * channel manager for this partition. It will not return - * back to XPC HB until the partition's XPC infrastructure - * has been dismantled. + * Make this partition inaccessible to local processes by marking it + * as no longer setup. Then wait before proceeding with the teardown + * until all existing references cease. */ + DBUG_ON(part->setup_state != XPC_P_SS_SETUP); + part->setup_state = XPC_P_SS_WTEARDOWN; - (void)xpc_part_ref(part); /* this will always succeed */ + wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); - if (xpc_make_first_contact(part) == xpSuccess) - xpc_channel_mgr(part); + /* now we can begin tearing down the infrastructure */ - xpc_part_deref(part); + xpc_teardown_ch_structures_sn(part); - xpc_teardown_infrastructure(part); + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->channels); + part->channels = NULL; + + part->setup_state = XPC_P_SS_TORNDOWN; } +/* + * When XPC HB determines that a partition has come up, it will create a new + * kthread and that kthread will call this function to attempt to set up the + * basic infrastructure used for Cross Partition Communication with the newly + * upped partition. + * + * The kthread that was created by XPC HB and which setup the XPC + * infrastructure will remain assigned to the partition becoming the channel + * manager for that partition until the partition is deactivating, at which + * time the kthread will teardown the XPC infrastructure and then exit. + */ static int xpc_activating(void *__partid) { @@ -433,64 +599,47 @@ xpc_activating(void *__partid) struct xpc_partition *part = &xpc_partitions[partid]; unsigned long irq_flags; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_DEACTIVATING) { - part->act_state = XPC_P_INACTIVE; + if (part->act_state == XPC_P_AS_DEACTIVATING) { + part->act_state = XPC_P_AS_INACTIVE; spin_unlock_irqrestore(&part->act_lock, irq_flags); part->remote_rp_pa = 0; return 0; } /* indicate the thread is activating */ - DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); - part->act_state = XPC_P_ACTIVATING; + DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ); + part->act_state = XPC_P_AS_ACTIVATING; XPC_SET_REASON(part, 0, 0); spin_unlock_irqrestore(&part->act_lock, irq_flags); - dev_dbg(xpc_part, "bringing partition %d up\n", partid); + dev_dbg(xpc_part, "activating partition %d\n", partid); - /* - * Register the remote partition's AMOs with SAL so it can handle - * and cleanup errors within that address range should the remote - * partition go down. We don't unregister this range because it is - * difficult to tell when outstanding writes to the remote partition - * are finished and thus when it is safe to unregister. This should - * not result in wasted space in the SAL xp_addr_region table because - * we should get the same page for remote_amos_page_pa after module - * reloads and system reboots. - */ - if (sn_register_xp_addr_region(part->remote_amos_page_pa, - PAGE_SIZE, 1) < 0) { - dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " - "xp_addr region\n", partid); + xpc_allow_hb(partid); - spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; - XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__); - spin_unlock_irqrestore(&part->act_lock, irq_flags); - part->remote_rp_pa = 0; - return 0; - } + if (xpc_setup_ch_structures(part) == xpSuccess) { + (void)xpc_part_ref(part); /* this will always succeed */ - xpc_allow_hb(partid, xpc_vars); - xpc_IPI_send_activated(part); + if (xpc_make_first_contact(part) == xpSuccess) { + xpc_mark_partition_active(part); + xpc_channel_mgr(part); + /* won't return until partition is deactivating */ + } - /* - * xpc_partition_up() holds this thread and marks this partition as - * XPC_P_ACTIVE by calling xpc_hb_mark_active(). - */ - (void)xpc_partition_up(part); + xpc_part_deref(part); + xpc_teardown_ch_structures(part); + } - xpc_disallow_hb(partid, xpc_vars); + xpc_disallow_hb(partid); xpc_mark_partition_inactive(part); if (part->reason == xpReactivating) { /* interrupting ourselves results in activating partition */ - xpc_IPI_send_reactivate(part); + xpc_request_partition_reactivation(part); } return 0; @@ -505,9 +654,9 @@ xpc_activate_partition(struct xpc_partition *part) spin_lock_irqsave(&part->act_lock, irq_flags); - DBUG_ON(part->act_state != XPC_P_INACTIVE); + DBUG_ON(part->act_state != XPC_P_AS_INACTIVE); - part->act_state = XPC_P_ACTIVATION_REQ; + part->act_state = XPC_P_AS_ACTIVATION_REQ; XPC_SET_REASON(part, xpCloneKThread, __LINE__); spin_unlock_irqrestore(&part->act_lock, irq_flags); @@ -516,62 +665,12 @@ xpc_activate_partition(struct xpc_partition *part) partid); if (IS_ERR(kthread)) { spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; + part->act_state = XPC_P_AS_INACTIVE; XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__); spin_unlock_irqrestore(&part->act_lock, irq_flags); } } -/* - * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified - * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more - * than one partition, we use an AMO_t structure per partition to indicate - * whether a partition has sent an IPI or not. If it has, then wake up the - * associated kthread to handle it. - * - * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC - * running on other partitions. - * - * Noteworthy Arguments: - * - * irq - Interrupt ReQuest number. NOT USED. - * - * dev_id - partid of IPI's potential sender. - */ -irqreturn_t -xpc_notify_IRQ_handler(int irq, void *dev_id) -{ - short partid = (short)(u64)dev_id; - struct xpc_partition *part = &xpc_partitions[partid]; - - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); - - if (xpc_part_ref(part)) { - xpc_check_for_channel_activity(part); - - xpc_part_deref(part); - } - return IRQ_HANDLED; -} - -/* - * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor - * because the write to their associated IPI amo completed after the IRQ/IPI - * was received. - */ -void -xpc_dropped_IPI_check(struct xpc_partition *part) -{ - if (xpc_part_ref(part)) { - xpc_check_for_channel_activity(part); - - part->dropped_IPI_timer.expires = jiffies + - XPC_P_DROPPED_IPI_WAIT; - add_timer(&part->dropped_IPI_timer); - xpc_part_deref(part); - } -} - void xpc_activate_kthreads(struct xpc_channel *ch, int needed) { @@ -616,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) do { /* deliver messages to their intended recipients */ - while (ch->w_local_GP.get < ch->w_remote_GP.put && + while (xpc_n_of_deliverable_payloads(ch) > 0 && !(ch->flags & XPC_C_DISCONNECTING)) { - xpc_deliver_msg(ch); + xpc_deliver_payload(ch); } if (atomic_inc_return(&ch->kthreads_idle) > @@ -632,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) "wait_event_interruptible_exclusive()\n"); (void)wait_event_interruptible_exclusive(ch->idle_wq, - (ch->w_local_GP.get < ch->w_remote_GP.put || + (xpc_n_of_deliverable_payloads(ch) > 0 || (ch->flags & XPC_C_DISCONNECTING))); atomic_dec(&ch->kthreads_idle); @@ -677,7 +776,7 @@ xpc_kthread_start(void *args) * additional kthreads to help deliver them. We only * need one less than total #of messages to deliver. */ - n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; + n_needed = xpc_n_of_deliverable_payloads(ch) - 1; if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) xpc_activate_kthreads(ch, n_needed); @@ -703,11 +802,9 @@ xpc_kthread_start(void *args) } spin_unlock_irqrestore(&ch->lock, irq_flags); - if (atomic_dec_return(&ch->kthreads_assigned) == 0) { - if (atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); - } + if (atomic_dec_return(&ch->kthreads_assigned) == 0 && + atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); @@ -758,9 +855,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, } else if (ch->flags & XPC_C_DISCONNECTING) { break; - } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) { - if (atomic_inc_return(&part->nchannels_engaged) == 1) - xpc_mark_partition_engaged(part); + } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 && + atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_indicate_partition_engaged(part); } (void)xpc_part_ref(part); xpc_msgqueue_ref(ch); @@ -782,8 +879,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, if (atomic_dec_return(&ch->kthreads_assigned) == 0 && atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); + xpc_indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); xpc_part_deref(part); @@ -815,7 +911,7 @@ xpc_disconnect_wait(int ch_number) int wakeup_channel_mgr; /* now wait for all callouts to the caller's function to cease */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (!xpc_part_ref(part)) @@ -834,16 +930,15 @@ xpc_disconnect_wait(int ch_number) DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); wakeup_channel_mgr = 0; - if (ch->delayed_IPI_flags) { - if (part->act_state != XPC_P_DEACTIVATING) { - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch->number, - ch->delayed_IPI_flags); - spin_unlock(&part->IPI_lock); + if (ch->delayed_chctl_flags) { + if (part->act_state != XPC_P_AS_DEACTIVATING) { + spin_lock(&part->chctl_lock); + part->chctl.flags[ch->number] |= + ch->delayed_chctl_flags; + spin_unlock(&part->chctl_lock); wakeup_channel_mgr = 1; } - ch->delayed_IPI_flags = 0; + ch->delayed_chctl_flags = 0; } ch->flags &= ~XPC_C_WDISCONNECT; @@ -856,13 +951,63 @@ xpc_disconnect_wait(int ch_number) } } +static int +xpc_setup_partitions(void) +{ + short partid; + struct xpc_partition *part; + + xpc_partitions = kzalloc(sizeof(struct xpc_partition) * + xp_max_npartitions, GFP_KERNEL); + if (xpc_partitions == NULL) { + dev_err(xpc_part, "can't get memory for partition structure\n"); + return -ENOMEM; + } + + /* + * The first few fields of each entry of xpc_partitions[] need to + * be initialized now so that calls to xpc_connect() and + * xpc_disconnect() can be made prior to the activation of any remote + * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE + * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING + * PARTITION HAS BEEN ACTIVATED. + */ + for (partid = 0; partid < xp_max_npartitions; partid++) { + part = &xpc_partitions[partid]; + + DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); + + part->activate_IRQ_rcvd = 0; + spin_lock_init(&part->act_lock); + part->act_state = XPC_P_AS_INACTIVE; + XPC_SET_REASON(part, 0, 0); + + init_timer(&part->disengage_timer); + part->disengage_timer.function = + xpc_timeout_partition_disengage; + part->disengage_timer.data = (unsigned long)part; + + part->setup_state = XPC_P_SS_UNSET; + init_waitqueue_head(&part->teardown_wq); + atomic_set(&part->references, 0); + } + + return xpc_setup_partitions_sn(); +} + +static void +xpc_teardown_partitions(void) +{ + kfree(xpc_partitions); +} + static void xpc_do_exit(enum xp_retval reason) { short partid; int active_part_count, printed_waiting_msg = 0; struct xpc_partition *part; - unsigned long printmsg_time, disengage_request_timeout = 0; + unsigned long printmsg_time, disengage_timeout = 0; /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ DBUG_ON(xpc_exiting == 1); @@ -873,10 +1018,7 @@ xpc_do_exit(enum xp_retval reason) * the heartbeat checker thread in case it's sleeping. */ xpc_exiting = 1; - wake_up_interruptible(&xpc_act_IRQ_wq); - - /* ignore all incoming interrupts */ - free_irq(SGI_XPC_ACTIVATE, NULL); + wake_up_interruptible(&xpc_activate_IRQ_wq); /* wait for the discovery thread to exit */ wait_for_completion(&xpc_discovery_exited); @@ -889,17 +1031,17 @@ xpc_do_exit(enum xp_retval reason) /* wait for all partitions to become inactive */ - printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); - xpc_disengage_request_timedout = 0; + printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); + xpc_disengage_timedout = 0; do { active_part_count = 0; - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_partition_disengaged(part) && - part->act_state == XPC_P_INACTIVE) { + part->act_state == XPC_P_AS_INACTIVE) { continue; } @@ -907,36 +1049,32 @@ xpc_do_exit(enum xp_retval reason) XPC_DEACTIVATE_PARTITION(part, reason); - if (part->disengage_request_timeout > - disengage_request_timeout) { - disengage_request_timeout = - part->disengage_request_timeout; - } + if (part->disengage_timeout > disengage_timeout) + disengage_timeout = part->disengage_timeout; } - if (xpc_partition_engaged(-1UL)) { - if (time_after(jiffies, printmsg_time)) { + if (xpc_any_partition_engaged()) { + if (time_is_before_jiffies(printmsg_time)) { dev_info(xpc_part, "waiting for remote " - "partitions to disengage, timeout in " - "%ld seconds\n", - (disengage_request_timeout - jiffies) - / HZ); + "partitions to deactivate, timeout in " + "%ld seconds\n", (disengage_timeout - + jiffies) / HZ); printmsg_time = jiffies + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); printed_waiting_msg = 1; } } else if (active_part_count > 0) { if (printed_waiting_msg) { dev_info(xpc_part, "waiting for local partition" - " to disengage\n"); + " to deactivate\n"); printed_waiting_msg = 0; } } else { - if (!xpc_disengage_request_timedout) { + if (!xpc_disengage_timedout) { dev_info(xpc_part, "all partitions have " - "disengaged\n"); + "deactivated\n"); } break; } @@ -946,33 +1084,28 @@ xpc_do_exit(enum xp_retval reason) } while (1); - DBUG_ON(xpc_partition_engaged(-1UL)); + DBUG_ON(xpc_any_partition_engaged()); + DBUG_ON(xpc_any_hbs_allowed() != 0); - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; - - /* now it's time to eliminate our heartbeat */ - del_timer_sync(&xpc_hb_timer); - DBUG_ON(xpc_vars->heartbeating_to_mask != 0); + xpc_teardown_rsvd_page(); if (reason == xpUnloading) { - /* take ourselves off of the reboot_notifier_list */ - (void)unregister_reboot_notifier(&xpc_reboot_notifier); - - /* take ourselves off of the die_notifier list */ (void)unregister_die_notifier(&xpc_die_notifier); + (void)unregister_reboot_notifier(&xpc_reboot_notifier); } - /* close down protections for IPI operations */ - xpc_restrict_IPI_ops(); - /* clear the interface to XPC's functions */ xpc_clear_interface(); if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); - kfree(xpc_remote_copy_buffer_base); + xpc_teardown_partitions(); + + if (is_shub()) + xpc_exit_sn2(); + else + xpc_exit_uv(); } /* @@ -1002,60 +1135,57 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) } /* - * Notify other partitions to disengage from all references to our memory. + * Notify other partitions to deactivate from us by first disengaging from all + * references to our memory. */ static void -xpc_die_disengage(void) +xpc_die_deactivate(void) { struct xpc_partition *part; short partid; - unsigned long engaged; - long time, printmsg_time, disengage_request_timeout; + int any_engaged; + long keep_waiting; + long wait_to_print; /* keep xpc_hb_checker thread from doing anything (just in case) */ xpc_exiting = 1; - xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ + xpc_disallow_all_hbs(); /*indicate we're deactivated */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; - if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> - remote_vars_version)) { - - /* just in case it was left set by an earlier XPC */ - xpc_clear_partition_engaged(1UL << partid); - continue; - } - - if (xpc_partition_engaged(1UL << partid) || - part->act_state != XPC_P_INACTIVE) { - xpc_request_partition_disengage(part); - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); + if (xpc_partition_engaged(partid) || + part->act_state != XPC_P_AS_INACTIVE) { + xpc_request_partition_deactivation(part); + xpc_indicate_partition_disengaged(part); } } - time = rtc_time(); - printmsg_time = time + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); - disengage_request_timeout = time + - (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); - - /* wait for all other partitions to disengage from us */ + /* + * Though we requested that all other partitions deactivate from us, + * we only wait until they've all disengaged or we've reached the + * defined timelimit. + * + * Given that one iteration through the following while-loop takes + * approximately 200 microseconds, calculate the #of loops to take + * before bailing and the #of loops before printing a waiting message. + */ + keep_waiting = xpc_disengage_timelimit * 1000 * 5; + wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5; while (1) { - engaged = xpc_partition_engaged(-1UL); - if (!engaged) { - dev_info(xpc_part, "all partitions have disengaged\n"); + any_engaged = xpc_any_partition_engaged(); + if (!any_engaged) { + dev_info(xpc_part, "all partitions have deactivated\n"); break; } - time = rtc_time(); - if (time >= disengage_request_timeout) { - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { - if (engaged & (1UL << partid)) { - dev_info(xpc_part, "disengage from " + if (!keep_waiting--) { + for (partid = 0; partid < xp_max_npartitions; + partid++) { + if (xpc_partition_engaged(partid)) { + dev_info(xpc_part, "deactivate from " "remote partition %d timed " "out\n", partid); } @@ -1063,15 +1193,15 @@ xpc_die_disengage(void) break; } - if (time >= printmsg_time) { + if (!wait_to_print--) { dev_info(xpc_part, "waiting for remote partitions to " - "disengage, timeout in %ld seconds\n", - (disengage_request_timeout - time) / - sn_rtc_cycles_per_second); - printmsg_time = time + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * - sn_rtc_cycles_per_second); + "deactivate, timeout in %ld seconds\n", + keep_waiting / (1000 * 5)); + wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * + 1000 * 5; } + + udelay(200); } } @@ -1086,10 +1216,11 @@ xpc_die_disengage(void) static int xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) { +#ifdef CONFIG_IA64 /* !!! temporary kludge */ switch (event) { case DIE_MACHINE_RESTART: case DIE_MACHINE_HALT: - xpc_die_disengage(); + xpc_die_deactivate(); break; case DIE_KDEBUG_ENTER: @@ -1100,8 +1231,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_ENTER: case DIE_INIT_MONARCH_ENTER: - xpc_vars->heartbeat++; - xpc_vars->heartbeat_offline = 1; + xpc_offline_heartbeat(); break; case DIE_KDEBUG_LEAVE: @@ -1112,10 +1242,12 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_LEAVE: case DIE_INIT_MONARCH_LEAVE: - xpc_vars->heartbeat++; - xpc_vars->heartbeat_offline = 0; + xpc_online_heartbeat(); break; } +#else + xpc_die_deactivate(); +#endif return NOTIFY_DONE; } @@ -1124,105 +1256,52 @@ int __init xpc_init(void) { int ret; - short partid; - struct xpc_partition *part; struct task_struct *kthread; - size_t buf_size; - - if (!ia64_platform_is("sn2")) - return -ENODEV; - - buf_size = max(XPC_RP_VARS_SIZE, - XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); - xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, - GFP_KERNEL, - &xpc_remote_copy_buffer_base); - if (xpc_remote_copy_buffer == NULL) - return -ENOMEM; snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - xpc_sysctl = register_sysctl_table(xpc_sys_dir); - - /* - * The first few fields of each entry of xpc_partitions[] need to - * be initialized now so that calls to xpc_connect() and - * xpc_disconnect() can be made prior to the activation of any remote - * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE - * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING - * PARTITION HAS BEEN ACTIVATED. - */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { - part = &xpc_partitions[partid]; - - DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); - - part->act_IRQ_rcvd = 0; - spin_lock_init(&part->act_lock); - part->act_state = XPC_P_INACTIVE; - XPC_SET_REASON(part, 0, 0); + if (is_shub()) { + /* + * The ia64-sn2 architecture supports at most 64 partitions. + * And the inability to unregister remote amos restricts us + * further to only support exactly 64 partitions on this + * architecture, no less. + */ + if (xp_max_npartitions != 64) { + dev_err(xpc_part, "max #of partitions not set to 64\n"); + ret = -EINVAL; + } else { + ret = xpc_init_sn2(); + } - init_timer(&part->disengage_request_timer); - part->disengage_request_timer.function = - xpc_timeout_partition_disengage_request; - part->disengage_request_timer.data = (unsigned long)part; + } else if (is_uv()) { + ret = xpc_init_uv(); - part->setup_state = XPC_P_UNSET; - init_waitqueue_head(&part->teardown_wq); - atomic_set(&part->references, 0); + } else { + ret = -ENODEV; } - /* - * Open up protections for IPI operations (and AMO operations on - * Shub 1.1 systems). - */ - xpc_allow_IPI_ops(); - - /* - * Interrupts being processed will increment this atomic variable and - * awaken the heartbeat thread which will process the interrupts. - */ - atomic_set(&xpc_act_IRQ_rcvd, 0); + if (ret != 0) + return ret; - /* - * This is safe to do before the xpc_hb_checker thread has started - * because the handler releases a wait queue. If an interrupt is - * received before the thread is waiting, it will not go to sleep, - * but rather immediately process the interrupt. - */ - ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, - "xpc hb", NULL); + ret = xpc_setup_partitions(); if (ret != 0) { - dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " - "errno=%d\n", -ret); - - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + dev_err(xpc_part, "can't get memory for partition structure\n"); + goto out_1; } + xpc_sysctl = register_sysctl_table(xpc_sys_dir); + /* * Fill the partition reserved page with the information needed by * other partitions to discover we are alive and establish initial * communications. */ - xpc_rsvd_page = xpc_rsvd_page_init(); - if (xpc_rsvd_page == NULL) { - dev_err(xpc_part, "could not setup our reserved page\n"); - - free_irq(SGI_XPC_ACTIVATE, NULL); - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + ret = xpc_setup_rsvd_page(); + if (ret != 0) { + dev_err(xpc_part, "can't setup our reserved page\n"); + goto out_2; } /* add ourselves to the reboot_notifier_list */ @@ -1235,9 +1314,6 @@ xpc_init(void) if (ret != 0) dev_warn(xpc_part, "can't register die notifier\n"); - init_timer(&xpc_hb_timer); - xpc_hb_timer.function = xpc_hb_beater; - /* * The real work-horse behind xpc. This processes incoming * interrupts and monitors remote heartbeats. @@ -1245,25 +1321,8 @@ xpc_init(void) kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME); if (IS_ERR(kthread)) { dev_err(xpc_part, "failed while forking hb check thread\n"); - - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; - - /* take ourselves off of the reboot_notifier_list */ - (void)unregister_reboot_notifier(&xpc_reboot_notifier); - - /* take ourselves off of the die_notifier list */ - (void)unregister_die_notifier(&xpc_die_notifier); - - del_timer_sync(&xpc_hb_timer); - free_irq(SGI_XPC_ACTIVATE, NULL); - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + ret = -EBUSY; + goto out_3; } /* @@ -1285,11 +1344,28 @@ xpc_init(void) /* set the interface to point at XPC's functions */ xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, - xpc_initiate_allocate, xpc_initiate_send, - xpc_initiate_send_notify, xpc_initiate_received, - xpc_initiate_partid_to_nasids); + xpc_initiate_send, xpc_initiate_send_notify, + xpc_initiate_received, xpc_initiate_partid_to_nasids); return 0; + + /* initialization was not successful */ +out_3: + xpc_teardown_rsvd_page(); + + (void)unregister_die_notifier(&xpc_die_notifier); + (void)unregister_reboot_notifier(&xpc_reboot_notifier); +out_2: + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + + xpc_teardown_partitions(); +out_1: + if (is_shub()) + xpc_exit_sn2(); + else + xpc_exit_uv(); + return ret; } module_init(xpc_init); @@ -1314,9 +1390,9 @@ module_param(xpc_hb_check_interval, int, 0); MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " "heartbeat checks."); -module_param(xpc_disengage_request_timelimit, int, 0); -MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " - "for disengage request to complete."); +module_param(xpc_disengage_timelimit, int, 0); +MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait " + "for disengage to complete."); module_param(xpc_kdebug_ignore, int, 0); MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 7dd4b5812c42..6722f6fe4dc7 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -15,57 +15,22 @@ * */ -#include <linux/kernel.h> -#include <linux/sysctl.h> -#include <linux/cache.h> -#include <linux/mmzone.h> -#include <linux/nodemask.h> -#include <asm/uncached.h> -#include <asm/sn/bte.h> -#include <asm/sn/intr.h> -#include <asm/sn/sn_sal.h> -#include <asm/sn/nodepda.h> -#include <asm/sn/addrs.h> +#include <linux/device.h> +#include <linux/hardirq.h> #include "xpc.h" /* XPC is exiting flag */ int xpc_exiting; -/* SH_IPI_ACCESS shub register value on startup */ -static u64 xpc_sh1_IPI_access; -static u64 xpc_sh2_IPI_access0; -static u64 xpc_sh2_IPI_access1; -static u64 xpc_sh2_IPI_access2; -static u64 xpc_sh2_IPI_access3; - -/* original protection values for each node */ -u64 xpc_prot_vec[MAX_NUMNODES]; - /* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; -static u64 *xpc_part_nasids; -static u64 *xpc_mach_nasids; -struct xpc_vars *xpc_vars; -struct xpc_vars_part *xpc_vars_part; +static unsigned long *xpc_part_nasids; +unsigned long *xpc_mach_nasids; -static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ -static int xp_nasid_mask_words; /* actual size in words of nasid mask */ - -/* - * For performance reasons, each entry of xpc_partitions[] is cacheline - * aligned. And xpc_partitions[] is padded with an additional entry at the - * end so that the last legitimate entry doesn't share its cacheline with - * another variable. - */ -struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; +static int xpc_nasid_mask_nbytes; /* #of bytes in nasid mask */ +int xpc_nasid_mask_nlongs; /* #of longs in nasid mask */ -/* - * Generic buffer used to store a local copy of portions of a remote - * partition's reserved page (either its header and part_nasids mask, - * or its vars). - */ -char *xpc_remote_copy_buffer; -void *xpc_remote_copy_buffer_base; +struct xpc_partition *xpc_partitions; /* * Guarantee that the kmalloc'd memory is cacheline aligned. @@ -95,56 +60,59 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) * Given a nasid, get the physical address of the partition's reserved page * for that nasid. This function returns 0 on any error. */ -static u64 +static unsigned long xpc_get_rsvd_page_pa(int nasid) { - bte_result_t bte_res; - s64 status; + enum xp_retval ret; u64 cookie = 0; - u64 rp_pa = nasid; /* seed with nasid */ - u64 len = 0; - u64 buf = buf; - u64 buf_len = 0; + unsigned long rp_pa = nasid; /* seed with nasid */ + size_t len = 0; + size_t buf_len = 0; + void *buf = buf; void *buf_base = NULL; while (1) { - status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa, - &len); + /* !!! rp_pa will need to be _gpa on UV. + * ??? So do we save it into the architecture specific parts + * ??? of the xpc_partition structure? Do we rename this + * ??? function or have two versions? Rename rp_pa for UV to + * ??? rp_gpa? + */ + ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, + &len); - dev_dbg(xpc_part, "SAL returned with status=%li, cookie=" - "0x%016lx, address=0x%016lx, len=0x%016lx\n", - status, cookie, rp_pa, len); + dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, " + "address=0x%016lx, len=0x%016lx\n", ret, + (unsigned long)cookie, rp_pa, len); - if (status != SALRET_MORE_PASSES) + if (ret != xpNeedMoreInfo) break; + /* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */ if (L1_CACHE_ALIGN(len) > buf_len) { kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); - buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len, - GFP_KERNEL, - &buf_base); + buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL, + &buf_base); if (buf_base == NULL) { dev_err(xpc_part, "unable to kmalloc " "len=0x%016lx\n", buf_len); - status = SALRET_ERROR; + ret = xpNoMemory; break; } } - bte_res = xp_bte_copy(rp_pa, buf, buf_len, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bte_res != BTE_SUCCESS) { - dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res); - status = SALRET_ERROR; + ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len); + if (ret != xpSuccess) { + dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret); break; } } kfree(buf_base); - if (status != SALRET_OK) + if (ret != xpSuccess) rp_pa = 0; dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa); @@ -156,300 +124,77 @@ xpc_get_rsvd_page_pa(int nasid) * other partitions to discover we are alive and establish initial * communications. */ -struct xpc_rsvd_page * -xpc_rsvd_page_init(void) +int +xpc_setup_rsvd_page(void) { + int ret; struct xpc_rsvd_page *rp; - AMO_t *amos_page; - u64 rp_pa, nasid_array = 0; - int i, ret; + unsigned long rp_pa; + unsigned long new_ts_jiffies; /* get the local reserved page's address */ preempt_disable(); - rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id())); + rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id())); preempt_enable(); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); - return NULL; + return -ESRCH; } rp = (struct xpc_rsvd_page *)__va(rp_pa); - if (rp->partid != sn_partition_id) { - dev_err(xpc_part, "the reserved page's partid of %d should be " - "%d\n", rp->partid, sn_partition_id); - return NULL; + if (rp->SAL_version < 3) { + /* SAL_versions < 3 had a SAL_partid defined as a u8 */ + rp->SAL_partid &= 0xff; + } + BUG_ON(rp->SAL_partid != xp_partition_id); + + if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) { + dev_err(xpc_part, "the reserved page's partid of %d is outside " + "supported range (< 0 || >= %d)\n", rp->SAL_partid, + xp_max_npartitions); + return -EINVAL; } rp->version = XPC_RP_VERSION; + rp->max_npartitions = xp_max_npartitions; /* establish the actual sizes of the nasid masks */ if (rp->SAL_version == 1) { /* SAL_version 1 didn't set the nasids_size field */ - rp->nasids_size = 128; + rp->SAL_nasids_size = 128; } - xp_nasid_mask_bytes = rp->nasids_size; - xp_nasid_mask_words = xp_nasid_mask_bytes / 8; + xpc_nasid_mask_nbytes = rp->SAL_nasids_size; + xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size * + BITS_PER_BYTE); /* setup the pointers to the various items in the reserved page */ xpc_part_nasids = XPC_RP_PART_NASIDS(rp); xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); - xpc_vars = XPC_RP_VARS(rp); - xpc_vars_part = XPC_RP_VARS_PART(rp); - - /* - * Before clearing xpc_vars, see if a page of AMOs had been previously - * allocated. If not we'll need to allocate one and set permissions - * so that cross-partition AMOs are allowed. - * - * The allocated AMO page needs MCA reporting to remain disabled after - * XPC has unloaded. To make this work, we keep a copy of the pointer - * to this page (i.e., amos_page) in the struct xpc_vars structure, - * which is pointed to by the reserved page, and re-use that saved copy - * on subsequent loads of XPC. This AMO page is never freed, and its - * memory protections are never restricted. - */ - amos_page = xpc_vars->amos_page; - if (amos_page == NULL) { - amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1)); - if (amos_page == NULL) { - dev_err(xpc_part, "can't allocate page of AMOs\n"); - return NULL; - } - - /* - * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems - * when xpc_allow_IPI_ops() is called via xpc_hb_init(). - */ - if (!enable_shub_wars_1_1()) { - ret = sn_change_memprotect(ia64_tpa((u64)amos_page), - PAGE_SIZE, - SN_MEMPROT_ACCESS_CLASS_1, - &nasid_array); - if (ret != 0) { - dev_err(xpc_part, "can't change memory " - "protections\n"); - uncached_free_page(__IA64_UNCACHED_OFFSET | - TO_PHYS((u64)amos_page), 1); - return NULL; - } - } - } else if (!IS_AMO_ADDRESS((u64)amos_page)) { - /* - * EFI's XPBOOT can also set amos_page in the reserved page, - * but it happens to leave it as an uncached physical address - * and we need it to be an uncached virtual, so we'll have to - * convert it. - */ - if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) { - dev_err(xpc_part, "previously used amos_page address " - "is bad = 0x%p\n", (void *)amos_page); - return NULL; - } - amos_page = (AMO_t *)TO_AMO((u64)amos_page); - } - - /* clear xpc_vars */ - memset(xpc_vars, 0, sizeof(struct xpc_vars)); - - xpc_vars->version = XPC_V_VERSION; - xpc_vars->act_nasid = cpuid_to_nasid(0); - xpc_vars->act_phys_cpuid = cpu_physical_id(0); - xpc_vars->vars_part_pa = __pa(xpc_vars_part); - xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); - xpc_vars->amos_page = amos_page; /* save for next load of XPC */ - - /* clear xpc_vars_part */ - memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * - XP_MAX_PARTITIONS); - - /* initialize the activate IRQ related AMO variables */ - for (i = 0; i < xp_nasid_mask_words; i++) - (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); - - /* initialize the engaged remote partitions related AMO variables */ - (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); - /* timestamp of when reserved page was setup by XPC */ - rp->stamp = CURRENT_TIME; + ret = xpc_setup_rsvd_page_sn(rp); + if (ret != 0) + return ret; /* + * Set timestamp of when reserved page was setup by XPC. * This signifies to the remote partition that our reserved * page is initialized. */ - rp->vars_pa = __pa(xpc_vars); + new_ts_jiffies = jiffies; + if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies) + new_ts_jiffies++; + rp->ts_jiffies = new_ts_jiffies; - return rp; + xpc_rsvd_page = rp; + return 0; } -/* - * Change protections to allow IPI operations (and AMO operations on - * Shub 1.1 systems). - */ void -xpc_allow_IPI_ops(void) +xpc_teardown_rsvd_page(void) { - int node; - int nasid; - - /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ - - if (is_shub2()) { - xpc_sh2_IPI_access0 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); - xpc_sh2_IPI_access1 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); - xpc_sh2_IPI_access2 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); - xpc_sh2_IPI_access3 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), - -1UL); - } - - } else { - xpc_sh1_IPI_access = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), - -1UL); - - /* - * Since the BIST collides with memory operations on - * SHUB 1.1 sn_change_memprotect() cannot be used. - */ - if (enable_shub_wars_1_1()) { - /* open up everything */ - xpc_prot_vec[node] = (u64)HUB_L((u64 *) - GLOBAL_MMR_ADDR - (nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0)); - HUB_S((u64 *) - GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0), - -1UL); - HUB_S((u64 *) - GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQRP_MMR_DIR_PRIVEC0), - -1UL); - } - } - } -} - -/* - * Restrict protections to disallow IPI operations (and AMO operations on - * Shub 1.1 systems). - */ -void -xpc_restrict_IPI_ops(void) -{ - int node; - int nasid; - - /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ - - if (is_shub2()) { - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), - xpc_sh2_IPI_access0); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), - xpc_sh2_IPI_access1); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), - xpc_sh2_IPI_access2); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), - xpc_sh2_IPI_access3); - } - - } else { - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), - xpc_sh1_IPI_access); - - if (enable_shub_wars_1_1()) { - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0), - xpc_prot_vec[node]); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQRP_MMR_DIR_PRIVEC0), - xpc_prot_vec[node]); - } - } - } -} - -/* - * At periodic intervals, scan through all active partitions and ensure - * their heartbeat is still active. If not, the partition is deactivated. - */ -void -xpc_check_remote_hb(void) -{ - struct xpc_vars *remote_vars; - struct xpc_partition *part; - short partid; - bte_result_t bres; - - remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; - - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { - - if (xpc_exiting) - break; - - if (partid == sn_partition_id) - continue; - - part = &xpc_partitions[partid]; - - if (part->act_state == XPC_P_INACTIVE || - part->act_state == XPC_P_DEACTIVATING) { - continue; - } - - /* pull the remote_hb cache line */ - bres = xp_bte_copy(part->remote_vars_pa, - (u64)remote_vars, - XPC_RP_VARS_SIZE, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) { - XPC_DEACTIVATE_PARTITION(part, - xpc_map_bte_errors(bres)); - continue; - } - - dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" - " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n", - partid, remote_vars->heartbeat, part->last_heartbeat, - remote_vars->heartbeat_offline, - remote_vars->heartbeating_to_mask); - - if (((remote_vars->heartbeat == part->last_heartbeat) && - (remote_vars->heartbeat_offline == 0)) || - !xpc_hb_allowed(sn_partition_id, remote_vars)) { - - XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat); - continue; - } - - part->last_heartbeat = remote_vars->heartbeat; - } + /* a zero timestamp indicates our rsvd page is not initialized */ + xpc_rsvd_page->ts_jiffies = 0; } /* @@ -459,11 +204,12 @@ xpc_check_remote_hb(void) * is large enough to contain a copy of their reserved page header and * part_nasids mask. */ -static enum xp_retval -xpc_get_remote_rp(int nasid, u64 *discovered_nasids, - struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) +enum xp_retval +xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, + struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa) { - int bres, i; + int l; + enum xp_retval ret; /* get the reserved page's physical address */ @@ -472,355 +218,45 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, return xpNoRsvdPageAddr; /* pull over the reserved page header and part_nasids mask */ - bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp, - XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) - return xpc_map_bte_errors(bres); + ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa, + XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes); + if (ret != xpSuccess) + return ret; if (discovered_nasids != NULL) { - u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); - - for (i = 0; i < xp_nasid_mask_words; i++) - discovered_nasids[i] |= remote_part_nasids[i]; - } - - /* check that the partid is for another partition */ + unsigned long *remote_part_nasids = + XPC_RP_PART_NASIDS(remote_rp); - if (remote_rp->partid < 1 || - remote_rp->partid > (XP_MAX_PARTITIONS - 1)) { - return xpInvalidPartid; + for (l = 0; l < xpc_nasid_mask_nlongs; l++) + discovered_nasids[l] |= remote_part_nasids[l]; } - if (remote_rp->partid == sn_partition_id) - return xpLocalPartid; + /* zero timestamp indicates the reserved page has not been setup */ + if (remote_rp->ts_jiffies == 0) + return xpRsvdPageNotSet; if (XPC_VERSION_MAJOR(remote_rp->version) != XPC_VERSION_MAJOR(XPC_RP_VERSION)) { return xpBadVersion; } - return xpSuccess; -} - -/* - * Get a copy of the remote partition's XPC variables from the reserved page. - * - * remote_vars points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_RP_VARS_SIZE. - */ -static enum xp_retval -xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) -{ - int bres; - - if (remote_vars_pa == 0) - return xpVarsNotSet; - - /* pull over the cross partition variables */ - bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) - return xpc_map_bte_errors(bres); - - if (XPC_VERSION_MAJOR(remote_vars->version) != - XPC_VERSION_MAJOR(XPC_V_VERSION)) { - return xpBadVersion; - } - - return xpSuccess; -} - -/* - * Update the remote partition's info. - */ -static void -xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, - struct timespec *remote_rp_stamp, u64 remote_rp_pa, - u64 remote_vars_pa, struct xpc_vars *remote_vars) -{ - part->remote_rp_version = remote_rp_version; - dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", - part->remote_rp_version); - - part->remote_rp_stamp = *remote_rp_stamp; - dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", - part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); - - part->remote_rp_pa = remote_rp_pa; - dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); - - part->remote_vars_pa = remote_vars_pa; - dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", - part->remote_vars_pa); - - part->last_heartbeat = remote_vars->heartbeat; - dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", - part->last_heartbeat); - - part->remote_vars_part_pa = remote_vars->vars_part_pa; - dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", - part->remote_vars_part_pa); - - part->remote_act_nasid = remote_vars->act_nasid; - dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", - part->remote_act_nasid); - - part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; - dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", - part->remote_act_phys_cpuid); - - part->remote_amos_page_pa = remote_vars->amos_page_pa; - dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", - part->remote_amos_page_pa); - - part->remote_vars_version = remote_vars->version; - dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", - part->remote_vars_version); -} - -/* - * Prior code has determined the nasid which generated an IPI. Inspect - * that nasid to determine if its partition needs to be activated or - * deactivated. - * - * A partition is consider "awaiting activation" if our partition - * flags indicate it is not active and it has a heartbeat. A - * partition is considered "awaiting deactivation" if our partition - * flags indicate it is active but it has no heartbeat or it is not - * sending its heartbeat to us. - * - * To determine the heartbeat, the remote nasid must have a properly - * initialized reserved page. - */ -static void -xpc_identify_act_IRQ_req(int nasid) -{ - struct xpc_rsvd_page *remote_rp; - struct xpc_vars *remote_vars; - u64 remote_rp_pa; - u64 remote_vars_pa; - int remote_rp_version; - int reactivate = 0; - int stamp_diff; - struct timespec remote_rp_stamp = { 0, 0 }; - short partid; - struct xpc_partition *part; - enum xp_retval ret; - - /* pull over the reserved page structure */ - - remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer; - - ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); - if (ret != xpSuccess) { - dev_warn(xpc_part, "unable to get reserved page from nasid %d, " - "which sent interrupt, reason=%d\n", nasid, ret); - return; - } - - remote_vars_pa = remote_rp->vars_pa; - remote_rp_version = remote_rp->version; - if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) - remote_rp_stamp = remote_rp->stamp; - - partid = remote_rp->partid; - part = &xpc_partitions[partid]; - - /* pull over the cross partition variables */ - - remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; - - ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); - if (ret != xpSuccess) { - - dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " - "which sent interrupt, reason=%d\n", nasid, ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - return; - } - - part->act_IRQ_rcvd++; - - dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " - "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd, - remote_vars->heartbeat, remote_vars->heartbeating_to_mask); - - if (xpc_partition_disengaged(part) && - part->act_state == XPC_P_INACTIVE) { - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { - if (xpc_partition_disengage_requested(1UL << partid)) { - /* - * Other side is waiting on us to disengage, - * even though we already have. - */ - return; - } - } else { - /* other side doesn't support disengage requests */ - xpc_clear_partition_disengage_request(1UL << partid); - } - - xpc_activate_partition(part); - return; - } - - DBUG_ON(part->remote_rp_version == 0); - DBUG_ON(part->remote_vars_version == 0); - - if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> - remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> - version)); - /* see if the other side rebooted */ - if (part->remote_amos_page_pa == - remote_vars->amos_page_pa && - xpc_hb_allowed(sn_partition_id, remote_vars)) { - /* doesn't look that way, so ignore the IPI */ - return; - } - } - - /* - * Other side rebooted and previous XPC didn't support the - * disengage request, so we don't need to do anything special. - */ - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - part->reactivate_nasid = nasid; - XPC_DEACTIVATE_PARTITION(part, xpReactivating); - return; - } - - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - /* - * Other side rebooted and previous XPC did support the - * disengage request, but the new one doesn't. - */ - - xpc_clear_partition_engaged(1UL << partid); - xpc_clear_partition_disengage_request(1UL << partid); - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - reactivate = 1; - - } else { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, - &remote_rp_stamp); - if (stamp_diff != 0) { - DBUG_ON(stamp_diff >= 0); - - /* - * Other side rebooted and the previous XPC did support - * the disengage request, as does the new one. - */ - - DBUG_ON(xpc_partition_engaged(1UL << partid)); - DBUG_ON(xpc_partition_disengage_requested(1UL << - partid)); - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, - remote_rp_pa, remote_vars_pa, - remote_vars); - reactivate = 1; - } - } - - if (part->disengage_request_timeout > 0 && - !xpc_partition_disengaged(part)) { - /* still waiting on other side to disengage from us */ - return; - } - - if (reactivate) { - part->reactivate_nasid = nasid; - XPC_DEACTIVATE_PARTITION(part, xpReactivating); - - } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && - xpc_partition_disengage_requested(1UL << partid)) { - XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown); + /* check that both remote and local partids are valid for each side */ + if (remote_rp->SAL_partid < 0 || + remote_rp->SAL_partid >= xp_max_npartitions || + remote_rp->max_npartitions <= xp_partition_id) { + return xpInvalidPartid; } -} -/* - * Loop through the activation AMO variables and process any bits - * which are set. Each bit indicates a nasid sending a partition - * activation or deactivation request. - * - * Return #of IRQs detected. - */ -int -xpc_identify_act_IRQ_sender(void) -{ - int word, bit; - u64 nasid_mask; - u64 nasid; /* remote nasid */ - int n_IRQs_detected = 0; - AMO_t *act_amos; - - act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; - - /* scan through act AMO variable looking for non-zero entries */ - for (word = 0; word < xp_nasid_mask_words; word++) { - - if (xpc_exiting) - break; - - nasid_mask = xpc_IPI_receive(&act_amos[word]); - if (nasid_mask == 0) { - /* no IRQs from nasids in this variable */ - continue; - } - - dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word, - nasid_mask); - - /* - * If this nasid has been added to the machine since - * our partition was reset, this will retain the - * remote nasid in our reserved pages machine mask. - * This is used in the event of module reload. - */ - xpc_mach_nasids[word] |= nasid_mask; - - /* locate the nasid(s) which sent interrupts */ + if (remote_rp->SAL_partid == xp_partition_id) + return xpLocalPartid; - for (bit = 0; bit < (8 * sizeof(u64)); bit++) { - if (nasid_mask & (1UL << bit)) { - n_IRQs_detected++; - nasid = XPC_NASID_FROM_W_B(word, bit); - dev_dbg(xpc_part, "interrupt from nasid %ld\n", - nasid); - xpc_identify_act_IRQ_req(nasid); - } - } - } - return n_IRQs_detected; + return xpSuccess; } /* - * See if the other side has responded to a partition disengage request - * from us. + * See if the other side has responded to a partition deactivate request + * from us. Though we requested the remote partition to deactivate with regard + * to us, we really only need to wait for the other side to disengage from us. */ int xpc_partition_disengaged(struct xpc_partition *part) @@ -828,41 +264,37 @@ xpc_partition_disengaged(struct xpc_partition *part) short partid = XPC_PARTID(part); int disengaged; - disengaged = (xpc_partition_engaged(1UL << partid) == 0); - if (part->disengage_request_timeout) { + disengaged = !xpc_partition_engaged(partid); + if (part->disengage_timeout) { if (!disengaged) { - if (time_before(jiffies, - part->disengage_request_timeout)) { + if (time_is_after_jiffies(part->disengage_timeout)) { /* timelimit hasn't been reached yet */ return 0; } /* - * Other side hasn't responded to our disengage + * Other side hasn't responded to our deactivate * request in a timely fashion, so assume it's dead. */ - dev_info(xpc_part, "disengage from remote partition %d " - "timed out\n", partid); - xpc_disengage_request_timedout = 1; - xpc_clear_partition_engaged(1UL << partid); + dev_info(xpc_part, "deactivate request to remote " + "partition %d timed out\n", partid); + xpc_disengage_timedout = 1; + xpc_assume_partition_disengaged(partid); disengaged = 1; } - part->disengage_request_timeout = 0; + part->disengage_timeout = 0; /* cancel the timer function, provided it's not us */ - if (!in_interrupt()) { - del_singleshot_timer_sync(&part-> - disengage_request_timer); - } + if (!in_interrupt()) + del_singleshot_timer_sync(&part->disengage_timer); - DBUG_ON(part->act_state != XPC_P_DEACTIVATING && - part->act_state != XPC_P_INACTIVE); - if (part->act_state != XPC_P_INACTIVE) + DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING && + part->act_state != XPC_P_AS_INACTIVE); + if (part->act_state != XPC_P_AS_INACTIVE) xpc_wakeup_channel_mgr(part); - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) - xpc_cancel_partition_disengage_request(part); + xpc_cancel_partition_deactivation_request(part); } return disengaged; } @@ -879,8 +311,8 @@ xpc_mark_partition_active(struct xpc_partition *part) dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part)); spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_ACTIVATING) { - part->act_state = XPC_P_ACTIVE; + if (part->act_state == XPC_P_AS_ACTIVATING) { + part->act_state = XPC_P_AS_ACTIVE; ret = xpSuccess; } else { DBUG_ON(part->reason == xpSuccess); @@ -892,7 +324,7 @@ xpc_mark_partition_active(struct xpc_partition *part) } /* - * Notify XPC that the partition is down. + * Start the process of deactivating the specified partition. */ void xpc_deactivate_partition(const int line, struct xpc_partition *part, @@ -902,16 +334,16 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_INACTIVE) { + if (part->act_state == XPC_P_AS_INACTIVE) { XPC_SET_REASON(part, reason, line); spin_unlock_irqrestore(&part->act_lock, irq_flags); if (reason == xpReactivating) { /* we interrupt ourselves to reactivate partition */ - xpc_IPI_send_reactivate(part); + xpc_request_partition_reactivation(part); } return; } - if (part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_AS_DEACTIVATING) { if ((part->reason == xpUnloading && reason != xpUnloading) || reason == xpReactivating) { XPC_SET_REASON(part, reason, line); @@ -920,22 +352,18 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, return; } - part->act_state = XPC_P_DEACTIVATING; + part->act_state = XPC_P_AS_DEACTIVATING; XPC_SET_REASON(part, reason, line); spin_unlock_irqrestore(&part->act_lock, irq_flags); - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { - xpc_request_partition_disengage(part); - xpc_IPI_send_disengage(part); + /* ask remote partition to deactivate with regard to us */ + xpc_request_partition_deactivation(part); - /* set a timelimit on the disengage request */ - part->disengage_request_timeout = jiffies + - (xpc_disengage_request_timelimit * HZ); - part->disengage_request_timer.expires = - part->disengage_request_timeout; - add_timer(&part->disengage_request_timer); - } + /* set a timelimit on the disengage phase of the deactivation request */ + part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ); + part->disengage_timer.expires = part->disengage_timeout; + add_timer(&part->disengage_timer); dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", XPC_PARTID(part), reason); @@ -955,7 +383,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part) XPC_PARTID(part)); spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; + part->act_state = XPC_P_AS_INACTIVE; spin_unlock_irqrestore(&part->act_lock, irq_flags); part->remote_rp_pa = 0; } @@ -974,28 +402,22 @@ xpc_discovery(void) { void *remote_rp_base; struct xpc_rsvd_page *remote_rp; - struct xpc_vars *remote_vars; - u64 remote_rp_pa; - u64 remote_vars_pa; + unsigned long remote_rp_pa; int region; int region_size; int max_regions; int nasid; struct xpc_rsvd_page *rp; - short partid; - struct xpc_partition *part; - u64 *discovered_nasids; + unsigned long *discovered_nasids; enum xp_retval ret; remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + - xp_nasid_mask_bytes, + xpc_nasid_mask_nbytes, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) return; - remote_vars = (struct xpc_vars *)remote_rp; - - discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words, + discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); @@ -1010,7 +432,7 @@ xpc_discovery(void) * protection is in regards to memory, IOI and IPI. */ max_regions = 64; - region_size = sn_region_size; + region_size = xp_region_size; switch (region_size) { case 128: @@ -1038,28 +460,28 @@ xpc_discovery(void) dev_dbg(xpc_part, "checking nasid %d\n", nasid); - if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) { + if (test_bit(nasid / 2, xpc_part_nasids)) { dev_dbg(xpc_part, "PROM indicates Nasid %d is " "part of the local partition; skipping " "region\n", nasid); break; } - if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) { + if (!(test_bit(nasid / 2, xpc_mach_nasids))) { dev_dbg(xpc_part, "PROM indicates Nasid %d was " "not on Numa-Link network at reset\n", nasid); continue; } - if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) { + if (test_bit(nasid / 2, discovered_nasids)) { dev_dbg(xpc_part, "Nasid %d is part of a " "partition which was previously " "discovered\n", nasid); continue; } - /* pull over the reserved page structure */ + /* pull over the rsvd page header & part_nasids mask */ ret = xpc_get_remote_rp(nasid, discovered_nasids, remote_rp, &remote_rp_pa); @@ -1074,72 +496,8 @@ xpc_discovery(void) continue; } - remote_vars_pa = remote_rp->vars_pa; - - partid = remote_rp->partid; - part = &xpc_partitions[partid]; - - /* pull over the cross partition variables */ - - ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); - if (ret != xpSuccess) { - dev_dbg(xpc_part, "unable to get XPC variables " - "from nasid %d, reason=%d\n", nasid, - ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - continue; - } - - if (part->act_state != XPC_P_INACTIVE) { - dev_dbg(xpc_part, "partition %d on nasid %d is " - "already activating\n", partid, nasid); - break; - } - - /* - * Register the remote partition's AMOs with SAL so it - * can handle and cleanup errors within that address - * range should the remote partition go down. We don't - * unregister this range because it is difficult to - * tell when outstanding writes to the remote partition - * are finished and thus when it is thus safe to - * unregister. This should not result in wasted space - * in the SAL xp_addr_region table because we should - * get the same page for remote_act_amos_pa after - * module reloads and system reboots. - */ - if (sn_register_xp_addr_region - (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) { - dev_dbg(xpc_part, - "partition %d failed to " - "register xp_addr region 0x%016lx\n", - partid, remote_vars->amos_page_pa); - - XPC_SET_REASON(part, xpPhysAddrRegFailed, - __LINE__); - break; - } - - /* - * The remote nasid is valid and available. - * Send an interrupt to that nasid to notify - * it that we are ready to begin activation. - */ - dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, " - "nasid %d, phys_cpuid 0x%x\n", - remote_vars->amos_page_pa, - remote_vars->act_nasid, - remote_vars->act_phys_cpuid); - - if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> - version)) { - part->remote_amos_page_pa = - remote_vars->amos_page_pa; - xpc_mark_partition_disengaged(part); - xpc_cancel_partition_disengage_request(part); - } - xpc_IPI_send_activate(remote_vars); + xpc_request_partition_activation(remote_rp, + remote_rp_pa, nasid); } } @@ -1155,20 +513,16 @@ enum xp_retval xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) { struct xpc_partition *part; - u64 part_nasid_pa; - int bte_res; + unsigned long part_nasid_pa; part = &xpc_partitions[partid]; if (part->remote_rp_pa == 0) return xpPartitionDown; - memset(nasid_mask, 0, XP_NASID_MASK_BYTES); - - part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); + memset(nasid_mask, 0, xpc_nasid_mask_nbytes); - bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask, - xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), - NULL); + part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa); - return xpc_map_bte_errors(bte_res); + return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa, + xpc_nasid_mask_nbytes); } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c new file mode 100644 index 000000000000..b4882ccf6344 --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -0,0 +1,2404 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) sn2-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include <linux/delay.h> +#include <asm/uncached.h> +#include <asm/sn/mspec.h> +#include <asm/sn/sn_sal.h> +#include "xpc.h" + +/* + * Define the number of u64s required to represent all the C-brick nasids + * as a bitmap. The cross-partition kernel modules deal only with + * C-brick nasids, thus the need for bitmaps which don't account for + * odd-numbered (non C-brick) nasids. + */ +#define XPC_MAX_PHYSNODES_SN2 (MAX_NUMALINK_NODES / 2) +#define XP_NASID_MASK_BYTES_SN2 ((XPC_MAX_PHYSNODES_SN2 + 7) / 8) +#define XP_NASID_MASK_WORDS_SN2 ((XPC_MAX_PHYSNODES_SN2 + 63) / 64) + +/* + * Memory for XPC's amo variables is allocated by the MSPEC driver. These + * pages are located in the lowest granule. The lowest granule uses 4k pages + * for cached references and an alternate TLB handler to never provide a + * cacheable mapping for the entire region. This will prevent speculative + * reading of cached copies of our lines from being issued which will cause + * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 + * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of + * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify + * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote + * partitions (i.e., XPCs) consider themselves currently engaged with the + * local XPC and 1 amo variable to request partition deactivation. + */ +#define XPC_NOTIFY_IRQ_AMOS_SN2 0 +#define XPC_ACTIVATE_IRQ_AMOS_SN2 (XPC_NOTIFY_IRQ_AMOS_SN2 + \ + XP_MAX_NPARTITIONS_SN2) +#define XPC_ENGAGED_PARTITIONS_AMO_SN2 (XPC_ACTIVATE_IRQ_AMOS_SN2 + \ + XP_NASID_MASK_WORDS_SN2) +#define XPC_DEACTIVATE_REQUEST_AMO_SN2 (XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1) + +/* + * Buffer used to store a local copy of portions of a remote partition's + * reserved page (either its header and part_nasids mask, or its vars). + */ +static void *xpc_remote_copy_buffer_base_sn2; +static char *xpc_remote_copy_buffer_sn2; + +static struct xpc_vars_sn2 *xpc_vars_sn2; +static struct xpc_vars_part_sn2 *xpc_vars_part_sn2; + +static int +xpc_setup_partitions_sn_sn2(void) +{ + /* nothing needs to be done */ + return 0; +} + +/* SH_IPI_ACCESS shub register value on startup */ +static u64 xpc_sh1_IPI_access_sn2; +static u64 xpc_sh2_IPI_access0_sn2; +static u64 xpc_sh2_IPI_access1_sn2; +static u64 xpc_sh2_IPI_access2_sn2; +static u64 xpc_sh2_IPI_access3_sn2; + +/* + * Change protections to allow IPI operations. + */ +static void +xpc_allow_IPI_ops_sn2(void) +{ + int node; + int nasid; + + /* !!! The following should get moved into SAL. */ + if (is_shub2()) { + xpc_sh2_IPI_access0_sn2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); + xpc_sh2_IPI_access1_sn2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); + xpc_sh2_IPI_access2_sn2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); + xpc_sh2_IPI_access3_sn2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + -1UL); + } + } else { + xpc_sh1_IPI_access_sn2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + -1UL); + } + } +} + +/* + * Restrict protections to disallow IPI operations. + */ +static void +xpc_disallow_IPI_ops_sn2(void) +{ + int node; + int nasid; + + /* !!! The following should get moved into SAL. */ + if (is_shub2()) { + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + xpc_sh2_IPI_access0_sn2); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + xpc_sh2_IPI_access1_sn2); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + xpc_sh2_IPI_access2_sn2); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + xpc_sh2_IPI_access3_sn2); + } + } else { + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + xpc_sh1_IPI_access_sn2); + } + } +} + +/* + * The following set of functions are used for the sending and receiving of + * IRQs (also known as IPIs). There are two flavors of IRQs, one that is + * associated with partition activity (SGI_XPC_ACTIVATE) and the other that + * is associated with channel activity (SGI_XPC_NOTIFY). + */ + +static u64 +xpc_receive_IRQ_amo_sn2(struct amo *amo) +{ + return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); +} + +static enum xp_retval +xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid, + int vector) +{ + int ret = 0; + unsigned long irq_flags; + + local_irq_save(irq_flags); + + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag); + sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IRQs and amos to it until the heartbeat times out. + */ + ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + return (ret == 0) ? xpSuccess : xpPioReadError; +} + +static struct amo * +xpc_init_IRQ_amo_sn2(int index) +{ + struct amo *amo = xpc_vars_sn2->amos_page + index; + + (void)xpc_receive_IRQ_amo_sn2(amo); /* clear amo variable */ + return amo; +} + +/* + * Functions associated with SGI_XPC_ACTIVATE IRQ. + */ + +/* + * Notify the heartbeat check thread that an activate IRQ has been received. + */ +static irqreturn_t +xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) +{ + unsigned long irq_flags; + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + xpc_activate_IRQ_rcvd++; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); + return IRQ_HANDLED; +} + +/* + * Flag the appropriate amo variable and send an IRQ to the specified node. + */ +static void +xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid, + int to_nasid, int to_phys_cpuid) +{ + struct amo *amos = (struct amo *)__va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS_SN2 * + sizeof(struct amo))); + + (void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)], + BIT_MASK(from_nasid / 2), to_nasid, + to_phys_cpuid, SGI_XPC_ACTIVATE); +} + +static void +xpc_send_local_activate_IRQ_sn2(int from_nasid) +{ + unsigned long irq_flags; + struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS_SN2 * + sizeof(struct amo))); + + /* fake the sending and receipt of an activate IRQ from remote nasid */ + FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable), + FETCHOP_OR, BIT_MASK(from_nasid / 2)); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + xpc_activate_IRQ_rcvd++; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); +} + +/* + * Functions associated with SGI_XPC_NOTIFY IRQ. + */ + +/* + * Check to see if any chctl flags were sent from the specified partition. + */ +static void +xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part) +{ + union xpc_channel_ctl_flags chctl; + unsigned long irq_flags; + + chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2. + local_chctl_amo_va); + if (chctl.all_flags == 0) + return; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.all_flags |= chctl.all_flags; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags=" + "0x%lx\n", XPC_PARTID(part), chctl.all_flags); + + xpc_wakeup_channel_mgr(part); +} + +/* + * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified + * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more + * than one partition, we use an amo structure per partition to indicate + * whether a partition has sent an IRQ or not. If it has, then wake up the + * associated kthread to handle it. + * + * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC + * running on other partitions. + * + * Noteworthy Arguments: + * + * irq - Interrupt ReQuest number. NOT USED. + * + * dev_id - partid of IRQ's potential sender. + */ +static irqreturn_t +xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) +{ + short partid = (short)(u64)dev_id; + struct xpc_partition *part = &xpc_partitions[partid]; + + DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2); + + if (xpc_part_ref(part)) { + xpc_check_for_sent_chctl_flags_sn2(part); + + xpc_part_deref(part); + } + return IRQ_HANDLED; +} + +/* + * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor + * because the write to their associated amo variable completed after the IRQ + * was received. + */ +static void +xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + + if (xpc_part_ref(part)) { + xpc_check_for_sent_chctl_flags_sn2(part); + + part_sn2->dropped_notify_IRQ_timer.expires = jiffies + + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL; + add_timer(&part_sn2->dropped_notify_IRQ_timer); + xpc_part_deref(part); + } +} + +/* + * Send a notify IRQ to the remote partition that is associated with the + * specified channel. + */ +static void +xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag, + char *chctl_flag_string, unsigned long *irq_flags) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + union xpc_channel_ctl_flags chctl = { 0 }; + enum xp_retval ret; + + if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) { + chctl.flags[ch->number] = chctl_flag; + ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va, + chctl.all_flags, + part_sn2->notify_IRQ_nasid, + part_sn2->notify_IRQ_phys_cpuid, + SGI_XPC_NOTIFY); + dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", + chctl_flag_string, ch->partid, ch->number, ret); + if (unlikely(ret != xpSuccess)) { + if (irq_flags != NULL) + spin_unlock_irqrestore(&ch->lock, *irq_flags); + XPC_DEACTIVATE_PARTITION(part, ret); + if (irq_flags != NULL) + spin_lock_irqsave(&ch->lock, *irq_flags); + } + } +} + +#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \ + xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f) + +/* + * Make it look like the remote partition, which is associated with the + * specified channel, sent us a notify IRQ. This faked IRQ will be handled + * by xpc_check_for_dropped_notify_IRQ_sn2(). + */ +static void +xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag, + char *chctl_flag_string) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + union xpc_channel_ctl_flags chctl = { 0 }; + + chctl.flags[ch->number] = chctl_flag; + FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va-> + variable), FETCHOP_OR, chctl.all_flags); + dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", + chctl_flag_string, ch->partid, ch->number); +} + +#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \ + xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f) + +static void +xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; + + args->reason = ch->reason; + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags); +} + +static void +xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags); +} + +static void +xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; + + args->entry_size = ch->entry_size; + args->local_nentries = ch->local_nentries; + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags); +} + +static void +xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; + + args->remote_nentries = ch->remote_nentries; + args->local_nentries = ch->local_nentries; + args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags); +} + +static void +xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch) +{ + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL); +} + +static void +xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch) +{ + XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST); +} + +static void +xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch, + unsigned long msgqueue_pa) +{ + ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa; +} + +/* + * This next set of functions are used to keep track of when a partition is + * potentially engaged in accessing memory belonging to another partition. + */ + +static void +xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO_SN2 * + sizeof(struct amo))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + BIT(sn_partition_id)); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IRQs and amos to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static void +xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + unsigned long irq_flags; + struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO_SN2 * + sizeof(struct amo))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~BIT(sn_partition_id)); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IRQs and amos to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + /* + * Send activate IRQ to get other side to see that we've cleared our + * bit in their engaged partitions amo. + */ + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); +} + +static void +xpc_assume_partition_disengaged_sn2(short partid) +{ + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; + + /* clear bit(s) based on partid mask in our partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~BIT(partid)); +} + +static int +xpc_partition_engaged_sn2(short partid) +{ + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; + + /* our partition's amo variable ANDed with partid mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + BIT(partid)) != 0; +} + +static int +xpc_any_partition_engaged_sn2(void) +{ + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; + + /* our partition's amo variable */ + return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; +} + +/* original protection values for each node */ +static u64 xpc_prot_vec_sn2[MAX_NUMNODES]; + +/* + * Change protections to allow amo operations on non-Shub 1.1 systems. + */ +static enum xp_retval +xpc_allow_amo_ops_sn2(struct amo *amos_page) +{ + u64 nasid_array = 0; + int ret; + + /* + * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST + * collides with memory operations. On those systems we call + * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead. + */ + if (!enable_shub_wars_1_1()) { + ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE, + SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) + return xpSalError; + } + return xpSuccess; +} + +/* + * Change protections to allow amo operations on Shub 1.1 systems. + */ +static void +xpc_allow_amo_ops_shub_wars_1_1_sn2(void) +{ + int node; + int nasid; + + if (!enable_shub_wars_1_1()) + return; + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + /* save current protection values */ + xpc_prot_vec_sn2[node] = + (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0)); + /* open up everything */ + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQRP_MMR_DIR_PRIVEC0), + -1UL); + } +} + +static enum xp_retval +xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa, + size_t *len) +{ + s64 status; + enum xp_retval ret; + + status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len); + if (status == SALRET_OK) + ret = xpSuccess; + else if (status == SALRET_MORE_PASSES) + ret = xpNeedMoreInfo; + else + ret = xpSalError; + + return ret; +} + + +static int +xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp) +{ + struct amo *amos_page; + int i; + int ret; + + xpc_vars_sn2 = XPC_RP_VARS(rp); + + rp->sn.vars_pa = xp_pa(xpc_vars_sn2); + + /* vars_part array follows immediately after vars */ + xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + + XPC_RP_VARS_SIZE); + + /* + * Before clearing xpc_vars_sn2, see if a page of amos had been + * previously allocated. If not we'll need to allocate one and set + * permissions so that cross-partition amos are allowed. + * + * The allocated amo page needs MCA reporting to remain disabled after + * XPC has unloaded. To make this work, we keep a copy of the pointer + * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure, + * which is pointed to by the reserved page, and re-use that saved copy + * on subsequent loads of XPC. This amo page is never freed, and its + * memory protections are never restricted. + */ + amos_page = xpc_vars_sn2->amos_page; + if (amos_page == NULL) { + amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1)); + if (amos_page == NULL) { + dev_err(xpc_part, "can't allocate page of amos\n"); + return -ENOMEM; + } + + /* + * Open up amo-R/W to cpu. This is done on Shub 1.1 systems + * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called. + */ + ret = xpc_allow_amo_ops_sn2(amos_page); + if (ret != xpSuccess) { + dev_err(xpc_part, "can't allow amo operations\n"); + uncached_free_page(__IA64_UNCACHED_OFFSET | + TO_PHYS((u64)amos_page), 1); + return -EPERM; + } + } + + /* clear xpc_vars_sn2 */ + memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2)); + + xpc_vars_sn2->version = XPC_V_VERSION; + xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0); + xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0); + xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2); + xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page); + xpc_vars_sn2->amos_page = amos_page; /* save for next load of XPC */ + + /* clear xpc_vars_part_sn2 */ + memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) * + XP_MAX_NPARTITIONS_SN2); + + /* initialize the activate IRQ related amo variables */ + for (i = 0; i < xpc_nasid_mask_nlongs; i++) + (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i); + + /* initialize the engaged remote partitions related amo variables */ + (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2); + (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2); + + return 0; +} + +static void +xpc_increment_heartbeat_sn2(void) +{ + xpc_vars_sn2->heartbeat++; +} + +static void +xpc_offline_heartbeat_sn2(void) +{ + xpc_increment_heartbeat_sn2(); + xpc_vars_sn2->heartbeat_offline = 1; +} + +static void +xpc_online_heartbeat_sn2(void) +{ + xpc_increment_heartbeat_sn2(); + xpc_vars_sn2->heartbeat_offline = 0; +} + +static void +xpc_heartbeat_init_sn2(void) +{ + DBUG_ON(xpc_vars_sn2 == NULL); + + bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); + xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0]; + xpc_online_heartbeat_sn2(); +} + +static void +xpc_heartbeat_exit_sn2(void) +{ + xpc_offline_heartbeat_sn2(); +} + +static enum xp_retval +xpc_get_remote_heartbeat_sn2(struct xpc_partition *part) +{ + struct xpc_vars_sn2 *remote_vars; + enum xp_retval ret; + + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; + + /* pull the remote vars structure that contains the heartbeat */ + ret = xp_remote_memcpy(xp_pa(remote_vars), + part->sn.sn2.remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) + return ret; + + dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, " + "heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part), + remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, + remote_vars->heartbeating_to_mask[0]); + + if ((remote_vars->heartbeat == part->last_heartbeat && + remote_vars->heartbeat_offline == 0) || + !xpc_hb_allowed(sn_partition_id, + &remote_vars->heartbeating_to_mask)) { + ret = xpNoHeartbeat; + } else { + part->last_heartbeat = remote_vars->heartbeat; + } + + return ret; +} + +/* + * Get a copy of the remote partition's XPC variables from the reserved page. + * + * remote_vars points to a buffer that is cacheline aligned for BTE copies and + * assumed to be of size XPC_RP_VARS_SIZE. + */ +static enum xp_retval +xpc_get_remote_vars_sn2(unsigned long remote_vars_pa, + struct xpc_vars_sn2 *remote_vars) +{ + enum xp_retval ret; + + if (remote_vars_pa == 0) + return xpVarsNotSet; + + /* pull over the cross partition variables */ + ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) + return ret; + + if (XPC_VERSION_MAJOR(remote_vars->version) != + XPC_VERSION_MAJOR(XPC_V_VERSION)) { + return xpBadVersion; + } + + return xpSuccess; +} + +static void +xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, + unsigned long remote_rp_pa, int nasid) +{ + xpc_send_local_activate_IRQ_sn2(nasid); +} + +static void +xpc_request_partition_reactivation_sn2(struct xpc_partition *part) +{ + xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid); +} + +static void +xpc_request_partition_deactivation_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + unsigned long irq_flags; + struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO_SN2 * + sizeof(struct amo))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + BIT(sn_partition_id)); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IRQs and amos to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + /* + * Send activate IRQ to get other side to see that we've set our + * bit in their deactivate request amo. + */ + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); +} + +static void +xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO_SN2 * + sizeof(struct amo))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~BIT(sn_partition_id)); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IRQs and amos to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static int +xpc_partition_deactivation_requested_sn2(short partid) +{ + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_DEACTIVATE_REQUEST_AMO_SN2; + + /* our partition's amo variable ANDed with partid mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + BIT(partid)) != 0; +} + +/* + * Update the remote partition's info. + */ +static void +xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, + unsigned long *remote_rp_ts_jiffies, + unsigned long remote_rp_pa, + unsigned long remote_vars_pa, + struct xpc_vars_sn2 *remote_vars) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + + part->remote_rp_version = remote_rp_version; + dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", + part->remote_rp_version); + + part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies; + dev_dbg(xpc_part, " remote_rp_ts_jiffies = 0x%016lx\n", + part->remote_rp_ts_jiffies); + + part->remote_rp_pa = remote_rp_pa; + dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); + + part_sn2->remote_vars_pa = remote_vars_pa; + dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", + part_sn2->remote_vars_pa); + + part->last_heartbeat = remote_vars->heartbeat; + dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", + part->last_heartbeat); + + part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa; + dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", + part_sn2->remote_vars_part_pa); + + part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid; + dev_dbg(xpc_part, " activate_IRQ_nasid = 0x%x\n", + part_sn2->activate_IRQ_nasid); + + part_sn2->activate_IRQ_phys_cpuid = + remote_vars->activate_IRQ_phys_cpuid; + dev_dbg(xpc_part, " activate_IRQ_phys_cpuid = 0x%x\n", + part_sn2->activate_IRQ_phys_cpuid); + + part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa; + dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", + part_sn2->remote_amos_page_pa); + + part_sn2->remote_vars_version = remote_vars->version; + dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", + part_sn2->remote_vars_version); +} + +/* + * Prior code has determined the nasid which generated a activate IRQ. + * Inspect that nasid to determine if its partition needs to be activated + * or deactivated. + * + * A partition is considered "awaiting activation" if our partition + * flags indicate it is not active and it has a heartbeat. A + * partition is considered "awaiting deactivation" if our partition + * flags indicate it is active but it has no heartbeat or it is not + * sending its heartbeat to us. + * + * To determine the heartbeat, the remote nasid must have a properly + * initialized reserved page. + */ +static void +xpc_identify_activate_IRQ_req_sn2(int nasid) +{ + struct xpc_rsvd_page *remote_rp; + struct xpc_vars_sn2 *remote_vars; + unsigned long remote_rp_pa; + unsigned long remote_vars_pa; + int remote_rp_version; + int reactivate = 0; + unsigned long remote_rp_ts_jiffies = 0; + short partid; + struct xpc_partition *part; + struct xpc_partition_sn2 *part_sn2; + enum xp_retval ret; + + /* pull over the reserved page structure */ + + remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2; + + ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); + if (ret != xpSuccess) { + dev_warn(xpc_part, "unable to get reserved page from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + return; + } + + remote_vars_pa = remote_rp->sn.vars_pa; + remote_rp_version = remote_rp->version; + remote_rp_ts_jiffies = remote_rp->ts_jiffies; + + partid = remote_rp->SAL_partid; + part = &xpc_partitions[partid]; + part_sn2 = &part->sn.sn2; + + /* pull over the cross partition variables */ + + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; + + ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars); + if (ret != xpSuccess) { + dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + return; + } + + part->activate_IRQ_rcvd++; + + dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " + "%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd, + remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]); + + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_AS_INACTIVE) { + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_ts_jiffies, + remote_rp_pa, remote_vars_pa, + remote_vars); + + if (xpc_partition_deactivation_requested_sn2(partid)) { + /* + * Other side is waiting on us to deactivate even though + * we already have. + */ + return; + } + + xpc_activate_partition(part); + return; + } + + DBUG_ON(part->remote_rp_version == 0); + DBUG_ON(part_sn2->remote_vars_version == 0); + + if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) { + + /* the other side rebooted */ + + DBUG_ON(xpc_partition_engaged_sn2(partid)); + DBUG_ON(xpc_partition_deactivation_requested_sn2(partid)); + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_ts_jiffies, + remote_rp_pa, remote_vars_pa, + remote_vars); + reactivate = 1; + } + + if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) { + /* still waiting on other side to disengage from us */ + return; + } + + if (reactivate) + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + else if (xpc_partition_deactivation_requested_sn2(partid)) + XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown); +} + +/* + * Loop through the activation amo variables and process any bits + * which are set. Each bit indicates a nasid sending a partition + * activation or deactivation request. + * + * Return #of IRQs detected. + */ +int +xpc_identify_activate_IRQ_sender_sn2(void) +{ + int l; + int b; + unsigned long nasid_mask_long; + u64 nasid; /* remote nasid */ + int n_IRQs_detected = 0; + struct amo *act_amos; + + act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2; + + /* scan through activate amo variables looking for non-zero entries */ + for (l = 0; l < xpc_nasid_mask_nlongs; l++) { + + if (xpc_exiting) + break; + + nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]); + + b = find_first_bit(&nasid_mask_long, BITS_PER_LONG); + if (b >= BITS_PER_LONG) { + /* no IRQs from nasids in this amo variable */ + continue; + } + + dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l, + nasid_mask_long); + + /* + * If this nasid has been added to the machine since + * our partition was reset, this will retain the + * remote nasid in our reserved pages machine mask. + * This is used in the event of module reload. + */ + xpc_mach_nasids[l] |= nasid_mask_long; + + /* locate the nasid(s) which sent interrupts */ + + do { + n_IRQs_detected++; + nasid = (l * BITS_PER_LONG + b) * 2; + dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid); + xpc_identify_activate_IRQ_req_sn2(nasid); + + b = find_next_bit(&nasid_mask_long, BITS_PER_LONG, + b + 1); + } while (b < BITS_PER_LONG); + } + return n_IRQs_detected; +} + +static void +xpc_process_activate_IRQ_rcvd_sn2(void) +{ + unsigned long irq_flags; + int n_IRQs_expected; + int n_IRQs_detected; + + DBUG_ON(xpc_activate_IRQ_rcvd == 0); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + n_IRQs_expected = xpc_activate_IRQ_rcvd; + xpc_activate_IRQ_rcvd = 0; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2(); + if (n_IRQs_detected < n_IRQs_expected) { + /* retry once to help avoid missing amo */ + (void)xpc_identify_activate_IRQ_sender_sn2(); + } +} + +/* + * Setup the channel structures that are sn2 specific. + */ +static enum xp_retval +xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + struct xpc_channel_sn2 *ch_sn2; + enum xp_retval retval; + int ret; + int cpuid; + int ch_number; + struct timer_list *timer; + short partid = XPC_PARTID(part); + + /* allocate all the required GET/PUT values */ + + part_sn2->local_GPs = + xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->local_GPs_base); + if (part_sn2->local_GPs == NULL) { + dev_err(xpc_chan, "can't get memory for local get/put " + "values\n"); + return xpNoMemory; + } + + part_sn2->remote_GPs = + xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->remote_GPs_base); + if (part_sn2->remote_GPs == NULL) { + dev_err(xpc_chan, "can't get memory for remote get/put " + "values\n"); + retval = xpNoMemory; + goto out_1; + } + + part_sn2->remote_GPs_pa = 0; + + /* allocate all the required open and close args */ + + part_sn2->local_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, &part_sn2-> + local_openclose_args_base); + if (part_sn2->local_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for local connect args\n"); + retval = xpNoMemory; + goto out_2; + } + + part_sn2->remote_openclose_args_pa = 0; + + part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid); + + part_sn2->notify_IRQ_nasid = 0; + part_sn2->notify_IRQ_phys_cpuid = 0; + part_sn2->remote_chctl_amo_va = NULL; + + sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid); + ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2, + IRQF_SHARED, part_sn2->notify_IRQ_owner, + (void *)(u64)partid); + if (ret != 0) { + dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " + "errno=%d\n", -ret); + retval = xpLackOfResources; + goto out_3; + } + + /* Setup a timer to check for dropped notify IRQs */ + timer = &part_sn2->dropped_notify_IRQ_timer; + init_timer(timer); + timer->function = + (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2; + timer->data = (unsigned long)part; + timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL; + add_timer(timer); + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch_sn2 = &part->channels[ch_number].sn.sn2; + + ch_sn2->local_GP = &part_sn2->local_GPs[ch_number]; + ch_sn2->local_openclose_args = + &part_sn2->local_openclose_args[ch_number]; + + mutex_init(&ch_sn2->msg_to_pull_mutex); + } + + /* + * Setup the per partition specific variables required by the + * remote partition to establish channel connections with us. + * + * The setting of the magic # indicates that these per partition + * specific variables are ready to be used. + */ + xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs); + xpc_vars_part_sn2[partid].openclose_args_pa = + xp_pa(part_sn2->local_openclose_args); + xpc_vars_part_sn2[partid].chctl_amo_pa = + xp_pa(part_sn2->local_chctl_amo_va); + cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ + xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid = + cpu_physical_id(cpuid); + xpc_vars_part_sn2[partid].nchannels = part->nchannels; + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2; + + return xpSuccess; + + /* setup of ch structures failed */ +out_3: + kfree(part_sn2->local_openclose_args_base); + part_sn2->local_openclose_args = NULL; +out_2: + kfree(part_sn2->remote_GPs_base); + part_sn2->remote_GPs = NULL; +out_1: + kfree(part_sn2->local_GPs_base); + part_sn2->local_GPs = NULL; + return retval; +} + +/* + * Teardown the channel structures that are sn2 specific. + */ +static void +xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + short partid = XPC_PARTID(part); + + /* + * Indicate that the variables specific to the remote partition are no + * longer available for its use. + */ + xpc_vars_part_sn2[partid].magic = 0; + + /* in case we've still got outstanding timers registered... */ + del_timer_sync(&part_sn2->dropped_notify_IRQ_timer); + free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); + + kfree(part_sn2->local_openclose_args_base); + part_sn2->local_openclose_args = NULL; + kfree(part_sn2->remote_GPs_base); + part_sn2->remote_GPs = NULL; + kfree(part_sn2->local_GPs_base); + part_sn2->local_GPs = NULL; + part_sn2->local_chctl_amo_va = NULL; +} + +/* + * Create a wrapper that hides the underlying mechanism for pulling a cacheline + * (or multiple cachelines) from a remote partition. + * + * src_pa must be a cacheline aligned physical address on the remote partition. + * dst must be a cacheline aligned virtual address on this partition. + * cnt must be cacheline sized + */ +/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */ +static enum xp_retval +xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, + const unsigned long src_pa, size_t cnt) +{ + enum xp_retval ret; + + DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa)); + DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst)); + DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); + + if (part->act_state == XPC_P_AS_DEACTIVATING) + return part->reason; + + ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt); + if (ret != xpSuccess) { + dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed," + " ret=%d\n", XPC_PARTID(part), ret); + } + return ret; +} + +/* + * Pull the remote per partition specific variables from the specified + * partition. + */ +static enum xp_retval +xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + u8 buffer[L1_CACHE_BYTES * 2]; + struct xpc_vars_part_sn2 *pulled_entry_cacheline = + (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer); + struct xpc_vars_part_sn2 *pulled_entry; + unsigned long remote_entry_cacheline_pa; + unsigned long remote_entry_pa; + short partid = XPC_PARTID(part); + enum xp_retval ret; + + /* pull the cacheline that contains the variables we're interested in */ + + DBUG_ON(part_sn2->remote_vars_part_pa != + L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa)); + DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2); + + remote_entry_pa = part_sn2->remote_vars_part_pa + + sn_partition_id * sizeof(struct xpc_vars_part_sn2); + + remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); + + pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline + + (remote_entry_pa & + (L1_CACHE_BYTES - 1))); + + ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline, + remote_entry_cacheline_pa, + L1_CACHE_BYTES); + if (ret != xpSuccess) { + dev_dbg(xpc_chan, "failed to pull XPC vars_part from " + "partition %d, ret=%d\n", partid, ret); + return ret; + } + + /* see if they've been set up yet */ + + if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 && + pulled_entry->magic != XPC_VP_MAGIC2_SN2) { + + if (pulled_entry->magic != 0) { + dev_dbg(xpc_chan, "partition %d's XPC vars_part for " + "partition %d has bad magic value (=0x%lx)\n", + partid, sn_partition_id, pulled_entry->magic); + return xpBadMagic; + } + + /* they've not been initialized yet */ + return xpRetry; + } + + if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) { + + /* validate the variables */ + + if (pulled_entry->GPs_pa == 0 || + pulled_entry->openclose_args_pa == 0 || + pulled_entry->chctl_amo_pa == 0) { + + dev_err(xpc_chan, "partition %d's XPC vars_part for " + "partition %d are not valid\n", partid, + sn_partition_id); + return xpInvalidAddress; + } + + /* the variables we imported look to be valid */ + + part_sn2->remote_GPs_pa = pulled_entry->GPs_pa; + part_sn2->remote_openclose_args_pa = + pulled_entry->openclose_args_pa; + part_sn2->remote_chctl_amo_va = + (struct amo *)__va(pulled_entry->chctl_amo_pa); + part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid; + part_sn2->notify_IRQ_phys_cpuid = + pulled_entry->notify_IRQ_phys_cpuid; + + if (part->nchannels > pulled_entry->nchannels) + part->nchannels = pulled_entry->nchannels; + + /* let the other side know that we've pulled their variables */ + + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2; + } + + if (pulled_entry->magic == XPC_VP_MAGIC1_SN2) + return xpRetry; + + return xpSuccess; +} + +/* + * Establish first contact with the remote partititon. This involves pulling + * the XPC per partition variables from the remote partition and waiting for + * the remote partition to pull ours. + */ +static enum xp_retval +xpc_make_first_contact_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + enum xp_retval ret; + + /* + * Register the remote partition's amos with SAL so it can handle + * and cleanup errors within that address range should the remote + * partition go down. We don't unregister this range because it is + * difficult to tell when outstanding writes to the remote partition + * are finished and thus when it is safe to unregister. This should + * not result in wasted space in the SAL xp_addr_region table because + * we should get the same page for remote_amos_page_pa after module + * reloads and system reboots. + */ + if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa, + PAGE_SIZE, 1) < 0) { + dev_warn(xpc_part, "xpc_activating(%d) failed to register " + "xp_addr region\n", XPC_PARTID(part)); + + ret = xpPhysAddrRegFailed; + XPC_DEACTIVATE_PARTITION(part, ret); + return ret; + } + + /* + * Send activate IRQ to get other side to activate if they've not + * already begun to do so. + */ + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); + + while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) { + if (ret != xpRetry) { + XPC_DEACTIVATE_PARTITION(part, ret); + return ret; + } + + dev_dbg(xpc_part, "waiting to make first contact with " + "partition %d\n", XPC_PARTID(part)); + + /* wait a 1/4 of a second or so */ + (void)msleep_interruptible(250); + + if (part->act_state == XPC_P_AS_DEACTIVATING) + return part->reason; + } + + return xpSuccess; +} + +/* + * Get the chctl flags and pull the openclose args and/or remote GPs as needed. + */ +static u64 +xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + unsigned long irq_flags; + union xpc_channel_ctl_flags chctl; + enum xp_retval ret; + + /* + * See if there are any chctl flags to be handled. + */ + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + chctl = part->chctl; + if (chctl.all_flags != 0) + part->chctl.all_flags = 0; + + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + if (xpc_any_openclose_chctl_flags_set(&chctl)) { + ret = xpc_pull_remote_cachelines_sn2(part, part-> + remote_openclose_args, + part_sn2-> + remote_openclose_args_pa, + XPC_OPENCLOSE_ARGS_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull openclose args from " + "partition %d, ret=%d\n", XPC_PARTID(part), + ret); + + /* don't bother processing chctl flags anymore */ + chctl.all_flags = 0; + } + } + + if (xpc_any_msg_chctl_flags_set(&chctl)) { + ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs, + part_sn2->remote_GPs_pa, + XPC_GP_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull GPs from partition " + "%d, ret=%d\n", XPC_PARTID(part), ret); + + /* don't bother processing chctl flags anymore */ + chctl.all_flags = 0; + } + } + + return chctl.all_flags; +} + +/* + * Allocate the local message queue and the notify queue. + */ +static enum xp_retval +xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + unsigned long irq_flags; + int nentries; + size_t nbytes; + + for (nentries = ch->local_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->entry_size; + ch_sn2->local_msgqueue = + xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, + &ch_sn2->local_msgqueue_base); + if (ch_sn2->local_msgqueue == NULL) + continue; + + nbytes = nentries * sizeof(struct xpc_notify_sn2); + ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL); + if (ch_sn2->notify_queue == NULL) { + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; + continue; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->local_nentries) { + dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->local_nentries, ch->partid, ch->number); + + ch->local_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for local message queue and notify " + "queue, partid=%d, channel=%d\n", ch->partid, ch->number); + return xpNoMemory; +} + +/* + * Allocate the cached remote message queue. + */ +static enum xp_retval +xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + unsigned long irq_flags; + int nentries; + size_t nbytes; + + DBUG_ON(ch->remote_nentries <= 0); + + for (nentries = ch->remote_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->entry_size; + ch_sn2->remote_msgqueue = + xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2-> + remote_msgqueue_base); + if (ch_sn2->remote_msgqueue == NULL) + continue; + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->remote_nentries) { + dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->remote_nentries, ch->partid, ch->number); + + ch->remote_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for cached remote message queue, " + "partid=%d, channel=%d\n", ch->partid, ch->number); + return xpNoMemory; +} + +/* + * Allocate message queues and other stuff associated with a channel. + * + * Note: Assumes all of the channel sizes are filled in. + */ +static enum xp_retval +xpc_setup_msg_structures_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + enum xp_retval ret; + + DBUG_ON(ch->flags & XPC_C_SETUP); + + ret = xpc_allocate_local_msgqueue_sn2(ch); + if (ret == xpSuccess) { + + ret = xpc_allocate_remote_msgqueue_sn2(ch); + if (ret != xpSuccess) { + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; + kfree(ch_sn2->notify_queue); + ch_sn2->notify_queue = NULL; + } + } + return ret; +} + +/* + * Free up message queues and other stuff that were allocated for the specified + * channel. + */ +static void +xpc_teardown_msg_structures_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + + DBUG_ON(!spin_is_locked(&ch->lock)); + + ch_sn2->remote_msgqueue_pa = 0; + + ch_sn2->local_GP->get = 0; + ch_sn2->local_GP->put = 0; + ch_sn2->remote_GP.get = 0; + ch_sn2->remote_GP.put = 0; + ch_sn2->w_local_GP.get = 0; + ch_sn2->w_local_GP.put = 0; + ch_sn2->w_remote_GP.get = 0; + ch_sn2->w_remote_GP.put = 0; + ch_sn2->next_msg_to_pull = 0; + + if (ch->flags & XPC_C_SETUP) { + dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", + ch->flags, ch->partid, ch->number); + + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; + kfree(ch_sn2->remote_msgqueue_base); + ch_sn2->remote_msgqueue = NULL; + kfree(ch_sn2->notify_queue); + ch_sn2->notify_queue = NULL; + } +} + +/* + * Notify those who wanted to be notified upon delivery of their message. + */ +static void +xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put) +{ + struct xpc_notify_sn2 *notify; + u8 notify_type; + s64 get = ch->sn.sn2.w_remote_GP.get - 1; + + while (++get < put && atomic_read(&ch->n_to_notify) > 0) { + + notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries]; + + /* + * See if the notify entry indicates it was associated with + * a message who's sender wants to be notified. It is possible + * that it is, but someone else is doing or has done the + * notification. + */ + notify_type = notify->type; + if (notify_type == 0 || + cmpxchg(¬ify->type, notify_type, 0) != notify_type) { + continue; + } + + DBUG_ON(notify_type != XPC_N_CALL); + + atomic_dec(&ch->n_to_notify); + + if (notify->func != NULL) { + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p " + "msg_number=%ld partid=%d channel=%d\n", + (void *)notify, get, ch->partid, ch->number); + + notify->func(reason, ch->partid, ch->number, + notify->key); + + dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p" + " msg_number=%ld partid=%d channel=%d\n", + (void *)notify, get, ch->partid, ch->number); + } + } +} + +static void +xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch) +{ + xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put); +} + +/* + * Clear some of the msg flags in the local message queue. + */ +static inline void +xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + s64 get; + + get = ch_sn2->w_remote_GP.get; + do { + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + + (get % ch->local_nentries) * + ch->entry_size); + msg->flags = 0; + } while (++get < ch_sn2->remote_GP.get); +} + +/* + * Clear some of the msg flags in the remote message queue. + */ +static inline void +xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + s64 put; + + put = ch_sn2->w_remote_GP.put; + do { + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + + (put % ch->remote_nentries) * + ch->entry_size); + msg->flags = 0; + } while (++put < ch_sn2->remote_GP.put); +} + +static int +xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch) +{ + return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get; +} + +static void +xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) +{ + struct xpc_channel *ch = &part->channels[ch_number]; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + int npayloads_sent; + + ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number]; + + /* See what, if anything, has changed for each connected channel */ + + xpc_msgqueue_ref(ch); + + if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get && + ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) { + /* nothing changed since GPs were last pulled */ + xpc_msgqueue_deref(ch); + return; + } + + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return; + } + + /* + * First check to see if messages recently sent by us have been + * received by the other side. (The remote GET value will have + * changed since we last looked at it.) + */ + + if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) { + + /* + * We need to notify any senders that want to be notified + * that their sent messages have been received by their + * intended recipients. We need to do this before updating + * w_remote_GP.get so that we don't allocate the same message + * queue entries prematurely (see xpc_allocate_msg()). + */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* + * Notify senders that messages sent have been + * received and delivered by the other side. + */ + xpc_notify_senders_sn2(ch, xpMsgDelivered, + ch_sn2->remote_GP.get); + } + + /* + * Clear msg->flags in previously sent messages, so that + * they're ready for xpc_allocate_msg(). + */ + xpc_clear_local_msgqueue_flags_sn2(ch); + + ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get; + + dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " + "channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid, + ch->number); + + /* + * If anyone was waiting for message queue entries to become + * available, wake them up. + */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); + } + + /* + * Now check for newly sent messages by the other side. (The remote + * PUT value will have changed since we last looked at it.) + */ + + if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) { + /* + * Clear msg->flags in previously received messages, so that + * they're ready for xpc_get_deliverable_payload_sn2(). + */ + xpc_clear_remote_msgqueue_flags_sn2(ch); + + ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; + + dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " + "channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid, + ch->number); + + npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch); + if (npayloads_sent > 0) { + dev_dbg(xpc_chan, "msgs waiting to be copied and " + "delivered=%d, partid=%d, channel=%d\n", + npayloads_sent, ch->partid, ch->number); + + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) + xpc_activate_kthreads(ch, npayloads_sent); + } + } + + xpc_msgqueue_deref(ch); +} + +static struct xpc_msg_sn2 * +xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + unsigned long remote_msg_pa; + struct xpc_msg_sn2 *msg; + u32 msg_index; + u32 nmsgs; + u64 msg_offset; + enum xp_retval ret; + + if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) { + /* we were interrupted by a signal */ + return NULL; + } + + while (get >= ch_sn2->next_msg_to_pull) { + + /* pull as many messages as are ready and able to be pulled */ + + msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries; + + DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put); + nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull; + if (msg_index + nmsgs > ch->remote_nentries) { + /* ignore the ones that wrap the msg queue for now */ + nmsgs = ch->remote_nentries - msg_index; + } + + msg_offset = msg_index * ch->entry_size; + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + + msg_offset); + remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset; + + ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa, + nmsgs * ch->entry_size); + if (ret != xpSuccess) { + + dev_dbg(xpc_chan, "failed to pull %d msgs starting with" + " msg %ld from partition %d, channel=%d, " + "ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull, + ch->partid, ch->number, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + + mutex_unlock(&ch_sn2->msg_to_pull_mutex); + return NULL; + } + + ch_sn2->next_msg_to_pull += nmsgs; + } + + mutex_unlock(&ch_sn2->msg_to_pull_mutex); + + /* return the message we were looking for */ + msg_offset = (get % ch->remote_nentries) * ch->entry_size; + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset); + + return msg; +} + +/* + * Get the next deliverable message's payload. + */ +static void * +xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + void *payload = NULL; + s64 get; + + do { + if (ch->flags & XPC_C_DISCONNECTING) + break; + + get = ch_sn2->w_local_GP.get; + rmb(); /* guarantee that .get loads before .put */ + if (get == ch_sn2->w_remote_GP.put) + break; + + /* There are messages waiting to be pulled and delivered. + * We need to try to secure one for ourselves. We'll do this + * by trying to increment w_local_GP.get and hope that no one + * else beats us to it. If they do, we'll we'll simply have + * to try again for the next one. + */ + + if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) { + /* we got the entry referenced by get */ + + dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " + "partid=%d, channel=%d\n", get + 1, + ch->partid, ch->number); + + /* pull the message from the remote partition */ + + msg = xpc_pull_remote_msg_sn2(ch, get); + + DBUG_ON(msg != NULL && msg->number != get); + DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + + payload = &msg->payload; + break; + } + + } while (1); + + return payload; +} + +/* + * Now we actually send the messages that are ready to be sent by advancing + * the local message queue's Put value and then send a chctl msgrequest to the + * recipient partition. + */ +static void +xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + s64 put = initial_put + 1; + int send_msgrequest = 0; + + while (1) { + + while (1) { + if (put == ch_sn2->w_local_GP.put) + break; + + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2-> + local_msgqueue + (put % + ch->local_nentries) * + ch->entry_size); + + if (!(msg->flags & XPC_M_SN2_READY)) + break; + + put++; + } + + if (put == initial_put) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) != + initial_put) { + /* someone else beat us to it */ + DBUG_ON(ch_sn2->local_GP->put < initial_put); + break; + } + + /* we just set the new value of local_GP->put */ + + dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " + "channel=%d\n", put, ch->partid, ch->number); + + send_msgrequest = 1; + + /* + * We need to ensure that the message referenced by + * local_GP->put is not XPC_M_SN2_READY or that local_GP->put + * equals w_local_GP.put, so we'll go have a look. + */ + initial_put = put; + } + + if (send_msgrequest) + xpc_send_chctl_msgrequest_sn2(ch); +} + +/* + * Allocate an entry for a message from the message queue associated with the + * specified channel. + */ +static enum xp_retval +xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, + struct xpc_msg_sn2 **address_of_msg) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + enum xp_retval ret; + s64 put; + + /* + * Get the next available message entry from the local message queue. + * If none are available, we'll make sure that we grab the latest + * GP values. + */ + ret = xpTimeout; + + while (1) { + + put = ch_sn2->w_local_GP.put; + rmb(); /* guarantee that .put loads before .get */ + if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { + + /* There are available message entries. We need to try + * to secure one for ourselves. We'll do this by trying + * to increment w_local_GP.put as long as someone else + * doesn't beat us to it. If they do, we'll have to + * try again. + */ + if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) == + put) { + /* we got the entry referenced by put */ + break; + } + continue; /* try again */ + } + + /* + * There aren't any available msg entries at this time. + * + * In waiting for a message entry to become available, + * we set a timeout in case the other side is not sending + * completion interrupts. This lets us fake a notify IRQ + * that will cause the notify IRQ handler to fetch the latest + * GP values as if an interrupt was sent by the other side. + */ + if (ret == xpTimeout) + xpc_send_chctl_local_msgrequest_sn2(ch); + + if (flags & XPC_NOWAIT) + return xpNoWait; + + ret = xpc_allocate_msg_wait(ch); + if (ret != xpInterrupted && ret != xpTimeout) + return ret; + } + + /* get the message's address and initialize it */ + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + + (put % ch->local_nentries) * + ch->entry_size); + + DBUG_ON(msg->flags != 0); + msg->number = put; + + dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", put + 1, + (void *)msg, msg->number, ch->partid, ch->number); + + *address_of_msg = msg; + return xpSuccess; +} + +/* + * Common code that does the actual sending of the message by advancing the + * local message queue's Put value and sends a chctl msgrequest to the + * partition the message is being sent to. + */ +static enum xp_retval +xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, + u16 payload_size, u8 notify_type, xpc_notify_func func, + void *key) +{ + enum xp_retval ret = xpSuccess; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg = msg; + struct xpc_notify_sn2 *notify = notify; + s64 msg_number; + s64 put; + + DBUG_ON(notify_type == XPC_N_CALL && func == NULL); + + if (XPC_MSG_SIZE(payload_size) > ch->entry_size) + return xpPayloadTooBig; + + xpc_msgqueue_ref(ch); + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + goto out_1; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + ret = xpNotConnected; + goto out_1; + } + + ret = xpc_allocate_msg_sn2(ch, flags, &msg); + if (ret != xpSuccess) + goto out_1; + + msg_number = msg->number; + + if (notify_type != 0) { + /* + * Tell the remote side to send an ACK interrupt when the + * message has been delivered. + */ + msg->flags |= XPC_M_SN2_INTERRUPT; + + atomic_inc(&ch->n_to_notify); + + notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries]; + notify->func = func; + notify->key = key; + notify->type = notify_type; + + /* ??? Is a mb() needed here? */ + + if (ch->flags & XPC_C_DISCONNECTING) { + /* + * An error occurred between our last error check and + * this one. We will try to clear the type field from + * the notify entry. If we succeed then + * xpc_disconnect_channel() didn't already process + * the notify entry. + */ + if (cmpxchg(¬ify->type, notify_type, 0) == + notify_type) { + atomic_dec(&ch->n_to_notify); + ret = ch->reason; + } + goto out_1; + } + } + + memcpy(&msg->payload, payload, payload_size); + + msg->flags |= XPC_M_SN2_READY; + + /* + * The preceding store of msg->flags must occur before the following + * load of local_GP->put. + */ + mb(); + + /* see if the message is next in line to be sent, if so send it */ + + put = ch_sn2->local_GP->put; + if (put == msg_number) + xpc_send_msgs_sn2(ch, put); + +out_1: + xpc_msgqueue_deref(ch); + return ret; +} + +/* + * Now we actually acknowledge the messages that have been delivered and ack'd + * by advancing the cached remote message queue's Get value and if requested + * send a chctl msgrequest to the message sender's partition. + * + * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition + * that sent the message. + */ +static void +xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg_sn2 *msg; + s64 get = initial_get + 1; + int send_msgrequest = 0; + + while (1) { + + while (1) { + if (get == ch_sn2->w_local_GP.get) + break; + + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2-> + remote_msgqueue + (get % + ch->remote_nentries) * + ch->entry_size); + + if (!(msg->flags & XPC_M_SN2_DONE)) + break; + + msg_flags |= msg->flags; + get++; + } + + if (get == initial_get) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) != + initial_get) { + /* someone else beat us to it */ + DBUG_ON(ch_sn2->local_GP->get <= initial_get); + break; + } + + /* we just set the new value of local_GP->get */ + + dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " + "channel=%d\n", get, ch->partid, ch->number); + + send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT); + + /* + * We need to ensure that the message referenced by + * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get + * equals w_local_GP.get, so we'll go have a look. + */ + initial_get = get; + } + + if (send_msgrequest) + xpc_send_chctl_msgrequest_sn2(ch); +} + +static void +xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) +{ + struct xpc_msg_sn2 *msg; + s64 msg_number; + s64 get; + + msg = container_of(payload, struct xpc_msg_sn2, payload); + msg_number = msg->number; + + dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", + (void *)msg, msg_number, ch->partid, ch->number); + + DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + msg_number % ch->remote_nentries); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + + msg->flags |= XPC_M_SN2_DONE; + + /* + * The preceding store of msg->flags must occur before the following + * load of local_GP->get. + */ + mb(); + + /* + * See if this message is next in line to be acknowledged as having + * been delivered. + */ + get = ch->sn.sn2.local_GP->get; + if (get == msg_number) + xpc_acknowledge_msgs_sn2(ch, get, msg->flags); +} + +int +xpc_init_sn2(void) +{ + int ret; + size_t buf_size; + + xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2; + xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2; + xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2; + xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; + xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; + xpc_online_heartbeat = xpc_online_heartbeat_sn2; + xpc_heartbeat_init = xpc_heartbeat_init_sn2; + xpc_heartbeat_exit = xpc_heartbeat_exit_sn2; + xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2; + + xpc_request_partition_activation = xpc_request_partition_activation_sn2; + xpc_request_partition_reactivation = + xpc_request_partition_reactivation_sn2; + xpc_request_partition_deactivation = + xpc_request_partition_deactivation_sn2; + xpc_cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_sn2; + + xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2; + xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2; + xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2; + xpc_make_first_contact = xpc_make_first_contact_sn2; + + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2; + xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2; + xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; + xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; + xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; + + xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2; + + xpc_setup_msg_structures = xpc_setup_msg_structures_sn2; + xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2; + + xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; + xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; + xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2; + xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2; + + xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2; + xpc_indicate_partition_disengaged = + xpc_indicate_partition_disengaged_sn2; + xpc_partition_engaged = xpc_partition_engaged_sn2; + xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; + xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; + + xpc_send_payload = xpc_send_payload_sn2; + xpc_received_payload = xpc_received_payload_sn2; + + if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) { + dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is " + "larger than %d\n", XPC_MSG_HDR_MAX_SIZE); + return -E2BIG; + } + + buf_size = max(XPC_RP_VARS_SIZE, + XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2); + xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size, + GFP_KERNEL, + &xpc_remote_copy_buffer_base_sn2); + if (xpc_remote_copy_buffer_sn2 == NULL) { + dev_err(xpc_part, "can't get memory for remote copy buffer\n"); + return -ENOMEM; + } + + /* open up protections for IPI and [potentially] amo operations */ + xpc_allow_IPI_ops_sn2(); + xpc_allow_amo_ops_shub_wars_1_1_sn2(); + + /* + * This is safe to do before the xpc_hb_checker thread has started + * because the handler releases a wait queue. If an interrupt is + * received before the thread is waiting, it will not go to sleep, + * but rather immediately process the interrupt. + */ + ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0, + "xpc hb", NULL); + if (ret != 0) { + dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " + "errno=%d\n", -ret); + xpc_disallow_IPI_ops_sn2(); + kfree(xpc_remote_copy_buffer_base_sn2); + } + return ret; +} + +void +xpc_exit_sn2(void) +{ + free_irq(SGI_XPC_ACTIVATE, NULL); + xpc_disallow_IPI_ops_sn2(); + kfree(xpc_remote_copy_buffer_base_sn2); +} diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c new file mode 100644 index 000000000000..1ac694c01623 --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -0,0 +1,1443 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) uv-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <asm/uv/uv_hub.h> +#include "../sgi-gru/gru.h" +#include "../sgi-gru/grukservices.h" +#include "xpc.h" + +static atomic64_t xpc_heartbeat_uv; +static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); + +#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES) +#define XPC_NOTIFY_MSG_SIZE_UV (2 * GRU_CACHE_LINE_BYTES) + +#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_ACTIVATE_MSG_SIZE_UV) +#define XPC_NOTIFY_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_NOTIFY_MSG_SIZE_UV) + +static void *xpc_activate_mq_uv; +static void *xpc_notify_mq_uv; + +static int +xpc_setup_partitions_sn_uv(void) +{ + short partid; + struct xpc_partition_uv *part_uv; + + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part_uv = &xpc_partitions[partid].sn.uv; + + spin_lock_init(&part_uv->flags_lock); + part_uv->remote_act_state = XPC_P_AS_INACTIVE; + } + return 0; +} + +static void * +xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq, + irq_handler_t irq_handler) +{ + int ret; + int nid; + int mq_order; + struct page *page; + void *mq; + + nid = cpu_to_node(cpuid); + mq_order = get_order(mq_size); + page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + mq_order); + if (page == NULL) { + dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " + "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); + return NULL; + } + + mq = page_address(page); + ret = gru_create_message_queue(mq, mq_size); + if (ret != 0) { + dev_err(xpc_part, "gru_create_message_queue() returned " + "error=%d\n", ret); + free_pages((unsigned long)mq, mq_order); + return NULL; + } + + /* !!! Need to do some other things to set up IRQ */ + + ret = request_irq(irq, irq_handler, 0, "xpc", NULL); + if (ret != 0) { + dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n", + irq, ret); + free_pages((unsigned long)mq, mq_order); + return NULL; + } + + /* !!! enable generation of irq when GRU mq op occurs to this mq */ + + /* ??? allow other partitions to access GRU mq? */ + + return mq; +} + +static void +xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq) +{ + /* ??? disallow other partitions to access GRU mq? */ + + /* !!! disable generation of irq when GRU mq op occurs to this mq */ + + free_irq(irq, NULL); + + free_pages((unsigned long)mq, get_order(mq_size)); +} + +static enum xp_retval +xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size) +{ + enum xp_retval xp_ret; + int ret; + + while (1) { + ret = gru_send_message_gpa(mq_gpa, msg, msg_size); + if (ret == MQE_OK) { + xp_ret = xpSuccess; + break; + } + + if (ret == MQE_QUEUE_FULL) { + dev_dbg(xpc_chan, "gru_send_message_gpa() returned " + "error=MQE_QUEUE_FULL\n"); + /* !!! handle QLimit reached; delay & try again */ + /* ??? Do we add a limit to the number of retries? */ + (void)msleep_interruptible(10); + } else if (ret == MQE_CONGESTION) { + dev_dbg(xpc_chan, "gru_send_message_gpa() returned " + "error=MQE_CONGESTION\n"); + /* !!! handle LB Overflow; simply try again */ + /* ??? Do we add a limit to the number of retries? */ + } else { + /* !!! Currently this is MQE_UNEXPECTED_CB_ERR */ + dev_err(xpc_chan, "gru_send_message_gpa() returned " + "error=%d\n", ret); + xp_ret = xpGruSendMqError; + break; + } + } + return xp_ret; +} + +static void +xpc_process_activate_IRQ_rcvd_uv(void) +{ + unsigned long irq_flags; + short partid; + struct xpc_partition *part; + u8 act_state_req; + + DBUG_ON(xpc_activate_IRQ_rcvd == 0); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part = &xpc_partitions[partid]; + + if (part->sn.uv.act_state_req == 0) + continue; + + xpc_activate_IRQ_rcvd--; + BUG_ON(xpc_activate_IRQ_rcvd < 0); + + act_state_req = part->sn.uv.act_state_req; + part->sn.uv.act_state_req = 0; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + if (act_state_req == XPC_P_ASR_ACTIVATE_UV) { + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_activate_partition(part); + else if (part->act_state == XPC_P_AS_DEACTIVATING) + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + + } else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) { + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_activate_partition(part); + else + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + + } else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) { + XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason); + + } else { + BUG(); + } + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (xpc_activate_IRQ_rcvd == 0) + break; + } + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + +} + +static void +xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, + struct xpc_activate_mq_msghdr_uv *msg_hdr, + int *wakeup_hb_checker) +{ + unsigned long irq_flags; + struct xpc_partition_uv *part_uv = &part->sn.uv; + struct xpc_openclose_args *args; + + part_uv->remote_act_state = msg_hdr->act_state; + + switch (msg_hdr->type) { + case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV: + /* syncing of remote_act_state was just done above */ + break; + + case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + break; + } + case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_activate_req_uv *msg; + + /* + * ??? Do we deal here with ts_jiffies being different + * ??? if act_state != XPC_P_AS_INACTIVE instead of + * ??? below? + */ + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_activate_req_uv, hdr); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV; + part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */ + part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies; + part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + (*wakeup_hb_checker)++; + break; + } + case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_deactivate_req_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_deactivate_req_uv, hdr); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = msg->reason; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + (*wakeup_hb_checker)++; + return; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_closerequest_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_closerequest_uv, + hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->reason = msg->reason; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: { + struct xpc_activate_mq_msg_chctl_closereply_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_closereply_uv, + hdr); + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_openrequest_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_openrequest_uv, + hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->entry_size = msg->entry_size; + args->local_nentries = msg->local_nentries; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: { + struct xpc_activate_mq_msg_chctl_openreply_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_openreply_uv, hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->remote_nentries = msg->remote_nentries; + args->local_nentries = msg->local_nentries; + args->local_msgqueue_pa = msg->local_notify_mq_gpa; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + default: + dev_err(xpc_part, "received unknown activate_mq msg type=%d " + "from partition=%d\n", msg_hdr->type, XPC_PARTID(part)); + + /* get hb checker to deactivate from the remote partition */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = xpBadMsgType; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + (*wakeup_hb_checker)++; + return; + } + + if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies && + part->remote_rp_ts_jiffies != 0) { + /* + * ??? Does what we do here need to be sensitive to + * ??? act_state or remote_act_state? + */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + (*wakeup_hb_checker)++; + } +} + +static irqreturn_t +xpc_handle_activate_IRQ_uv(int irq, void *dev_id) +{ + struct xpc_activate_mq_msghdr_uv *msg_hdr; + short partid; + struct xpc_partition *part; + int wakeup_hb_checker = 0; + + while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) { + + partid = msg_hdr->partid; + if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { + dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() " + "received invalid partid=0x%x in message\n", + partid); + } else { + part = &xpc_partitions[partid]; + if (xpc_part_ref(part)) { + xpc_handle_activate_mq_msg_uv(part, msg_hdr, + &wakeup_hb_checker); + xpc_part_deref(part); + } + } + + gru_free_message(xpc_activate_mq_uv, msg_hdr); + } + + if (wakeup_hb_checker) + wake_up_interruptible(&xpc_activate_IRQ_wq); + + return IRQ_HANDLED; +} + +static enum xp_retval +xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size, + int msg_type) +{ + struct xpc_activate_mq_msghdr_uv *msg_hdr = msg; + + DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV); + + msg_hdr->type = msg_type; + msg_hdr->partid = XPC_PARTID(part); + msg_hdr->act_state = part->act_state; + msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies; + + /* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */ + return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg, + msg_size); +} + +static void +xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg, + size_t msg_size, int msg_type) +{ + enum xp_retval ret; + + ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type); + if (unlikely(ret != xpSuccess)) + XPC_DEACTIVATE_PARTITION(part, ret); +} + +static void +xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags, + void *msg, size_t msg_size, int msg_type) +{ + struct xpc_partition *part = &xpc_partitions[ch->number]; + enum xp_retval ret; + + ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type); + if (unlikely(ret != xpSuccess)) { + if (irq_flags != NULL) + spin_unlock_irqrestore(&ch->lock, *irq_flags); + + XPC_DEACTIVATE_PARTITION(part, ret); + + if (irq_flags != NULL) + spin_lock_irqsave(&ch->lock, *irq_flags); + } +} + +static void +xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req) +{ + unsigned long irq_flags; + struct xpc_partition_uv *part_uv = &part->sn.uv; + + /* + * !!! Make our side think that the remote parition sent an activate + * !!! message our way by doing what the activate IRQ handler would + * !!! do had one really been sent. + */ + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = act_state_req; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); +} + +static enum xp_retval +xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa, + size_t *len) +{ + /* !!! call the UV version of sn_partition_reserved_page_pa() */ + return xpUnsupported; +} + +static int +xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp) +{ + rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv); + return 0; +} + +static void +xpc_send_heartbeat_uv(int msg_type) +{ + short partid; + struct xpc_partition *part; + struct xpc_activate_mq_msg_heartbeat_req_uv msg; + + /* + * !!! On uv we're broadcasting a heartbeat message every 5 seconds. + * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20 + * !!! seconds. This is an increase in numalink traffic. + * ??? Is this good? + */ + + msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv); + + partid = find_first_bit(xpc_heartbeating_to_mask_uv, + XP_MAX_NPARTITIONS_UV); + + while (partid < XP_MAX_NPARTITIONS_UV) { + part = &xpc_partitions[partid]; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + msg_type); + + partid = find_next_bit(xpc_heartbeating_to_mask_uv, + XP_MAX_NPARTITIONS_UV, partid + 1); + } +} + +static void +xpc_increment_heartbeat_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV); +} + +static void +xpc_offline_heartbeat_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); +} + +static void +xpc_online_heartbeat_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV); +} + +static void +xpc_heartbeat_init_uv(void) +{ + atomic64_set(&xpc_heartbeat_uv, 0); + bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); + xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0]; +} + +static void +xpc_heartbeat_exit_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); +} + +static enum xp_retval +xpc_get_remote_heartbeat_uv(struct xpc_partition *part) +{ + struct xpc_partition_uv *part_uv = &part->sn.uv; + enum xp_retval ret = xpNoHeartbeat; + + if (part_uv->remote_act_state != XPC_P_AS_INACTIVE && + part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) { + + if (part_uv->heartbeat != part->last_heartbeat || + (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) { + + part->last_heartbeat = part_uv->heartbeat; + ret = xpSuccess; + } + } + return ret; +} + +static void +xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, + unsigned long remote_rp_gpa, int nasid) +{ + short partid = remote_rp->SAL_partid; + struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_activate_mq_msg_activate_req_uv msg; + + part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */ + part->remote_rp_ts_jiffies = remote_rp->ts_jiffies; + part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa; + + /* + * ??? Is it a good idea to make this conditional on what is + * ??? potentially stale state information? + */ + if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) { + msg.rp_gpa = uv_gpa(xpc_rsvd_page); + msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa; + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV); + } + + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV); +} + +static void +xpc_request_partition_reactivation_uv(struct xpc_partition *part) +{ + xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV); +} + +static void +xpc_request_partition_deactivation_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_deactivate_req_uv msg; + + /* + * ??? Is it a good idea to make this conditional on what is + * ??? potentially stale state information? + */ + if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING && + part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) { + + msg.reason = part->reason; + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV); + } +} + +static void +xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part) +{ + /* nothing needs to be done */ + return; +} + +static void +xpc_init_fifo_uv(struct xpc_fifo_head_uv *head) +{ + head->first = NULL; + head->last = NULL; + spin_lock_init(&head->lock); + head->n_entries = 0; +} + +static void * +xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head) +{ + unsigned long irq_flags; + struct xpc_fifo_entry_uv *first; + + spin_lock_irqsave(&head->lock, irq_flags); + first = head->first; + if (head->first != NULL) { + head->first = first->next; + if (head->first == NULL) + head->last = NULL; + } + head->n_entries++; + spin_unlock_irqrestore(&head->lock, irq_flags); + first->next = NULL; + return first; +} + +static void +xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head, + struct xpc_fifo_entry_uv *last) +{ + unsigned long irq_flags; + + last->next = NULL; + spin_lock_irqsave(&head->lock, irq_flags); + if (head->last != NULL) + head->last->next = last; + else + head->first = last; + head->last = last; + head->n_entries--; + BUG_ON(head->n_entries < 0); + spin_unlock_irqrestore(&head->lock, irq_flags); +} + +static int +xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head) +{ + return head->n_entries; +} + +/* + * Setup the channel structures that are uv specific. + */ +static enum xp_retval +xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) +{ + struct xpc_channel_uv *ch_uv; + int ch_number; + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch_uv = &part->channels[ch_number].sn.uv; + + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + xpc_init_fifo_uv(&ch_uv->recv_msg_list); + } + + return xpSuccess; +} + +/* + * Teardown the channel structures that are uv specific. + */ +static void +xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part) +{ + /* nothing needs to be done */ + return; +} + +static enum xp_retval +xpc_make_first_contact_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_uv msg; + + /* + * We send a sync msg to get the remote partition's remote_act_state + * updated to our current act_state which at this point should + * be XPC_P_AS_ACTIVATING. + */ + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV); + + while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) { + + dev_dbg(xpc_part, "waiting to make first contact with " + "partition %d\n", XPC_PARTID(part)); + + /* wait a 1/4 of a second or so */ + (void)msleep_interruptible(250); + + if (part->act_state == XPC_P_AS_DEACTIVATING) + return part->reason; + } + + return xpSuccess; +} + +static u64 +xpc_get_chctl_all_flags_uv(struct xpc_partition *part) +{ + unsigned long irq_flags; + union xpc_channel_ctl_flags chctl; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + chctl = part->chctl; + if (chctl.all_flags != 0) + part->chctl.all_flags = 0; + + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + return chctl.all_flags; +} + +static enum xp_retval +xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + struct xpc_send_msg_slot_uv *msg_slot; + unsigned long irq_flags; + int nentries; + int entry; + size_t nbytes; + + for (nentries = ch->local_nentries; nentries > 0; nentries--) { + nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv); + ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL); + if (ch_uv->send_msg_slots == NULL) + continue; + + for (entry = 0; entry < nentries; entry++) { + msg_slot = &ch_uv->send_msg_slots[entry]; + + msg_slot->msg_slot_number = entry; + xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list, + &msg_slot->next); + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->local_nentries) + ch->local_nentries = nentries; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + return xpNoMemory; +} + +static enum xp_retval +xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + struct xpc_notify_mq_msg_uv *msg_slot; + unsigned long irq_flags; + int nentries; + int entry; + size_t nbytes; + + for (nentries = ch->remote_nentries; nentries > 0; nentries--) { + nbytes = nentries * ch->entry_size; + ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL); + if (ch_uv->recv_msg_slots == NULL) + continue; + + for (entry = 0; entry < nentries; entry++) { + msg_slot = ch_uv->recv_msg_slots + entry * + ch->entry_size; + + msg_slot->hdr.msg_slot_number = entry; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->remote_nentries) + ch->remote_nentries = nentries; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + return xpNoMemory; +} + +/* + * Allocate msg_slots associated with the channel. + */ +static enum xp_retval +xpc_setup_msg_structures_uv(struct xpc_channel *ch) +{ + static enum xp_retval ret; + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + + DBUG_ON(ch->flags & XPC_C_SETUP); + + ret = xpc_allocate_send_msg_slot_uv(ch); + if (ret == xpSuccess) { + + ret = xpc_allocate_recv_msg_slot_uv(ch); + if (ret != xpSuccess) { + kfree(ch_uv->send_msg_slots); + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + } + } + return ret; +} + +/* + * Free up msg_slots and clear other stuff that were setup for the specified + * channel. + */ +static void +xpc_teardown_msg_structures_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + + DBUG_ON(!spin_is_locked(&ch->lock)); + + ch_uv->remote_notify_mq_gpa = 0; + + if (ch->flags & XPC_C_SETUP) { + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + kfree(ch_uv->send_msg_slots); + xpc_init_fifo_uv(&ch_uv->recv_msg_list); + kfree(ch_uv->recv_msg_slots); + } +} + +static void +xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_closerequest_uv msg; + + msg.ch_number = ch->number; + msg.reason = ch->reason; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV); +} + +static void +xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_closereply_uv msg; + + msg.ch_number = ch->number; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV); +} + +static void +xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_openrequest_uv msg; + + msg.ch_number = ch->number; + msg.entry_size = ch->entry_size; + msg.local_nentries = ch->local_nentries; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV); +} + +static void +xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_openreply_uv msg; + + msg.ch_number = ch->number; + msg.local_nentries = ch->local_nentries; + msg.remote_nentries = ch->remote_nentries; + msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv); + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV); +} + +static void +xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number) +{ + unsigned long irq_flags; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); +} + +static void +xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch, + unsigned long msgqueue_pa) +{ + ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa; +} + +static void +xpc_indicate_partition_engaged_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_uv msg; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV); +} + +static void +xpc_indicate_partition_disengaged_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_uv msg; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV); +} + +static void +xpc_assume_partition_disengaged_uv(short partid) +{ + struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv; + unsigned long irq_flags; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); +} + +static int +xpc_partition_engaged_uv(short partid) +{ + return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0; +} + +static int +xpc_any_partition_engaged_uv(void) +{ + struct xpc_partition_uv *part_uv; + short partid; + + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part_uv = &xpc_partitions[partid].sn.uv; + if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0) + return 1; + } + return 0; +} + +static enum xp_retval +xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags, + struct xpc_send_msg_slot_uv **address_of_msg_slot) +{ + enum xp_retval ret; + struct xpc_send_msg_slot_uv *msg_slot; + struct xpc_fifo_entry_uv *entry; + + while (1) { + entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list); + if (entry != NULL) + break; + + if (flags & XPC_NOWAIT) + return xpNoWait; + + ret = xpc_allocate_msg_wait(ch); + if (ret != xpInterrupted && ret != xpTimeout) + return ret; + } + + msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next); + *address_of_msg_slot = msg_slot; + return xpSuccess; +} + +static void +xpc_free_msg_slot_uv(struct xpc_channel *ch, + struct xpc_send_msg_slot_uv *msg_slot) +{ + xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next); + + /* wakeup anyone waiting for a free msg slot */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); +} + +static void +xpc_notify_sender_uv(struct xpc_channel *ch, + struct xpc_send_msg_slot_uv *msg_slot, + enum xp_retval reason) +{ + xpc_notify_func func = msg_slot->func; + + if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) { + + atomic_dec(&ch->n_to_notify); + + dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p " + "msg_slot_number=%d partid=%d channel=%d\n", msg_slot, + msg_slot->msg_slot_number, ch->partid, ch->number); + + func(reason, ch->partid, ch->number, msg_slot->key); + + dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p " + "msg_slot_number=%d partid=%d channel=%d\n", msg_slot, + msg_slot->msg_slot_number, ch->partid, ch->number); + } +} + +static void +xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch, + struct xpc_notify_mq_msg_uv *msg) +{ + struct xpc_send_msg_slot_uv *msg_slot; + int entry = msg->hdr.msg_slot_number % ch->local_nentries; + + msg_slot = &ch->sn.uv.send_msg_slots[entry]; + + BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number); + msg_slot->msg_slot_number += ch->local_nentries; + + if (msg_slot->func != NULL) + xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered); + + xpc_free_msg_slot_uv(ch, msg_slot); +} + +static void +xpc_handle_notify_mq_msg_uv(struct xpc_partition *part, + struct xpc_notify_mq_msg_uv *msg) +{ + struct xpc_partition_uv *part_uv = &part->sn.uv; + struct xpc_channel *ch; + struct xpc_channel_uv *ch_uv; + struct xpc_notify_mq_msg_uv *msg_slot; + unsigned long irq_flags; + int ch_number = msg->hdr.ch_number; + + if (unlikely(ch_number >= part->nchannels)) { + dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid " + "channel number=0x%x in message from partid=%d\n", + ch_number, XPC_PARTID(part)); + + /* get hb checker to deactivate from the remote partition */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = xpBadChannelNumber; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); + return; + } + + ch = &part->channels[ch_number]; + xpc_msgqueue_ref(ch); + + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return; + } + + /* see if we're really dealing with an ACK for a previously sent msg */ + if (msg->hdr.size == 0) { + xpc_handle_notify_mq_ack_uv(ch, msg); + xpc_msgqueue_deref(ch); + return; + } + + /* we're dealing with a normal message sent via the notify_mq */ + ch_uv = &ch->sn.uv; + + msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots + + (msg->hdr.msg_slot_number % ch->remote_nentries) * + ch->entry_size); + + BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number); + BUG_ON(msg_slot->hdr.size != 0); + + memcpy(msg_slot, msg, msg->hdr.size); + + xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next); + + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) { + /* + * If there is an existing idle kthread get it to deliver + * the payload, otherwise we'll have to get the channel mgr + * for this partition to create a kthread to do the delivery. + */ + if (atomic_read(&ch->kthreads_idle) > 0) + wake_up_nr(&ch->idle_wq, 1); + else + xpc_send_chctl_local_msgrequest_uv(part, ch->number); + } + xpc_msgqueue_deref(ch); +} + +static irqreturn_t +xpc_handle_notify_IRQ_uv(int irq, void *dev_id) +{ + struct xpc_notify_mq_msg_uv *msg; + short partid; + struct xpc_partition *part; + + while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) { + + partid = msg->hdr.partid; + if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { + dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received " + "invalid partid=0x%x in message\n", partid); + } else { + part = &xpc_partitions[partid]; + + if (xpc_part_ref(part)) { + xpc_handle_notify_mq_msg_uv(part, msg); + xpc_part_deref(part); + } + } + + gru_free_message(xpc_notify_mq_uv, msg); + } + + return IRQ_HANDLED; +} + +static int +xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch) +{ + return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list); +} + +static void +xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number) +{ + struct xpc_channel *ch = &part->channels[ch_number]; + int ndeliverable_payloads; + + xpc_msgqueue_ref(ch); + + ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch); + + if (ndeliverable_payloads > 0 && + (ch->flags & XPC_C_CONNECTED) && + (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) { + + xpc_activate_kthreads(ch, ndeliverable_payloads); + } + + xpc_msgqueue_deref(ch); +} + +static enum xp_retval +xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, + u16 payload_size, u8 notify_type, xpc_notify_func func, + void *key) +{ + enum xp_retval ret = xpSuccess; + struct xpc_send_msg_slot_uv *msg_slot = NULL; + struct xpc_notify_mq_msg_uv *msg; + u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV]; + size_t msg_size; + + DBUG_ON(notify_type != XPC_N_CALL); + + msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size; + if (msg_size > ch->entry_size) + return xpPayloadTooBig; + + xpc_msgqueue_ref(ch); + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + goto out_1; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + ret = xpNotConnected; + goto out_1; + } + + ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot); + if (ret != xpSuccess) + goto out_1; + + if (func != NULL) { + atomic_inc(&ch->n_to_notify); + + msg_slot->key = key; + wmb(); /* a non-NULL func must hit memory after the key */ + msg_slot->func = func; + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + goto out_2; + } + } + + msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer; + msg->hdr.partid = xp_partition_id; + msg->hdr.ch_number = ch->number; + msg->hdr.size = msg_size; + msg->hdr.msg_slot_number = msg_slot->msg_slot_number; + memcpy(&msg->payload, payload, payload_size); + + ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size); + if (ret == xpSuccess) + goto out_1; + + XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret); +out_2: + if (func != NULL) { + /* + * Try to NULL the msg_slot's func field. If we fail, then + * xpc_notify_senders_of_disconnect_uv() beat us to it, in which + * case we need to pretend we succeeded to send the message + * since the user will get a callout for the disconnect error + * by xpc_notify_senders_of_disconnect_uv(), and to also get an + * error returned here will confuse them. Additionally, since + * in this case the channel is being disconnected we don't need + * to put the the msg_slot back on the free list. + */ + if (cmpxchg(&msg_slot->func, func, NULL) != func) { + ret = xpSuccess; + goto out_1; + } + + msg_slot->key = NULL; + atomic_dec(&ch->n_to_notify); + } + xpc_free_msg_slot_uv(ch, msg_slot); +out_1: + xpc_msgqueue_deref(ch); + return ret; +} + +/* + * Tell the callers of xpc_send_notify() that the status of their payloads + * is unknown because the channel is now disconnecting. + * + * We don't worry about putting these msg_slots on the free list since the + * msg_slots themselves are about to be kfree'd. + */ +static void +xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch) +{ + struct xpc_send_msg_slot_uv *msg_slot; + int entry; + + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING)); + + for (entry = 0; entry < ch->local_nentries; entry++) { + + if (atomic_read(&ch->n_to_notify) == 0) + break; + + msg_slot = &ch->sn.uv.send_msg_slots[entry]; + if (msg_slot->func != NULL) + xpc_notify_sender_uv(ch, msg_slot, ch->reason); + } +} + +/* + * Get the next deliverable message's payload. + */ +static void * +xpc_get_deliverable_payload_uv(struct xpc_channel *ch) +{ + struct xpc_fifo_entry_uv *entry; + struct xpc_notify_mq_msg_uv *msg; + void *payload = NULL; + + if (!(ch->flags & XPC_C_DISCONNECTING)) { + entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list); + if (entry != NULL) { + msg = container_of(entry, struct xpc_notify_mq_msg_uv, + hdr.u.next); + payload = &msg->payload; + } + } + return payload; +} + +static void +xpc_received_payload_uv(struct xpc_channel *ch, void *payload) +{ + struct xpc_notify_mq_msg_uv *msg; + enum xp_retval ret; + + msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload); + + /* return an ACK to the sender of this message */ + + msg->hdr.partid = xp_partition_id; + msg->hdr.size = 0; /* size of zero indicates this is an ACK */ + + ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, + sizeof(struct xpc_notify_mq_msghdr_uv)); + if (ret != xpSuccess) + XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret); + + msg->hdr.msg_slot_number += ch->remote_nentries; +} + +int +xpc_init_uv(void) +{ + xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv; + xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv; + xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv; + xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv; + xpc_increment_heartbeat = xpc_increment_heartbeat_uv; + xpc_offline_heartbeat = xpc_offline_heartbeat_uv; + xpc_online_heartbeat = xpc_online_heartbeat_uv; + xpc_heartbeat_init = xpc_heartbeat_init_uv; + xpc_heartbeat_exit = xpc_heartbeat_exit_uv; + xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv; + + xpc_request_partition_activation = xpc_request_partition_activation_uv; + xpc_request_partition_reactivation = + xpc_request_partition_reactivation_uv; + xpc_request_partition_deactivation = + xpc_request_partition_deactivation_uv; + xpc_cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_uv; + + xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv; + xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv; + + xpc_make_first_contact = xpc_make_first_contact_uv; + + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv; + xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv; + xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv; + xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv; + xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv; + + xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv; + + xpc_setup_msg_structures = xpc_setup_msg_structures_uv; + xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv; + + xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv; + xpc_indicate_partition_disengaged = + xpc_indicate_partition_disengaged_uv; + xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv; + xpc_partition_engaged = xpc_partition_engaged_uv; + xpc_any_partition_engaged = xpc_any_partition_engaged_uv; + + xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv; + xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv; + xpc_send_payload = xpc_send_payload_uv; + xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv; + xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv; + xpc_received_payload = xpc_received_payload_uv; + + if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { + dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n", + XPC_MSG_HDR_MAX_SIZE); + return -E2BIG; + } + + /* ??? The cpuid argument's value is 0, is that what we want? */ + /* !!! The irq argument's value isn't correct. */ + xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0, + xpc_handle_activate_IRQ_uv); + if (xpc_activate_mq_uv == NULL) + return -ENOMEM; + + /* ??? The cpuid argument's value is 0, is that what we want? */ + /* !!! The irq argument's value isn't correct. */ + xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0, + xpc_handle_notify_IRQ_uv); + if (xpc_notify_mq_uv == NULL) { + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, + XPC_ACTIVATE_MQ_SIZE_UV, 0); + return -ENOMEM; + } + + return 0; +} + +void +xpc_exit_uv(void) +{ + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0); + + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0); +} diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 822dc8e8d7f0..71513b3af708 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -21,21 +21,8 @@ */ #include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ioport.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/smp.h> -#include <linux/string.h> -#include <asm/sn/bte.h> -#include <asm/sn/io.h> -#include <asm/sn/sn_sal.h> -#include <asm/atomic.h> #include "xp.h" /* @@ -57,7 +44,7 @@ struct xpnet_message { u16 version; /* Version for this message */ u16 embedded_bytes; /* #of bytes embedded in XPC message */ u32 magic; /* Special number indicating this is xpnet */ - u64 buf_pa; /* phys address of buffer to retrieve */ + unsigned long buf_pa; /* phys address of buffer to retrieve */ u32 size; /* #of bytes in buffer */ u8 leadin_ignore; /* #of bytes to ignore at the beginning */ u8 tailout_ignore; /* #of bytes to ignore at the end */ @@ -70,11 +57,10 @@ struct xpnet_message { * * XPC expects each message to exist in an individual cacheline. */ -#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) +#define XPNET_MSG_SIZE XPC_MSG_PAYLOAD_MAX_SIZE #define XPNET_MSG_DATA_MAX \ - (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) -#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) -#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) + (XPNET_MSG_SIZE - offsetof(struct xpnet_message, data)) +#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPC_MSG_MAX_SIZE) #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) @@ -105,7 +91,6 @@ struct xpnet_message { * then be released. */ struct xpnet_pending_msg { - struct list_head free_list; struct sk_buff *skb; atomic_t use_count; }; @@ -121,7 +106,7 @@ struct net_device *xpnet_device; * When we are notified of other partitions activating, we add them to * our bitmask of partitions to which we broadcast. */ -static u64 xpnet_broadcast_partitions; +static unsigned long *xpnet_broadcast_partitions; /* protect above */ static DEFINE_SPINLOCK(xpnet_broadcast_lock); @@ -141,16 +126,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock); #define XPNET_DEF_MTU (0x8000UL) /* - * The partition id is encapsulated in the MAC address. The following - * define locates the octet the partid is in. + * The partid is encapsulated in the MAC address beginning in the following + * octet and it consists of two octets. */ -#define XPNET_PARTID_OCTET 1 -#define XPNET_LICENSE_OCTET 2 +#define XPNET_PARTID_OCTET 2 + +/* Define the XPNET debug device structures to be used with dev_dbg() et al */ -/* - * Define the XPNET debug device structure that is to be used with dev_dbg(), - * dev_err(), dev_warn(), and dev_info(). - */ struct device_driver xpnet_dbg_name = { .name = "xpnet" }; @@ -169,7 +151,8 @@ static void xpnet_receive(short partid, int channel, struct xpnet_message *msg) { struct sk_buff *skb; - bte_result_t bret; + void *dst; + enum xp_retval ret; struct xpnet_dev_private *priv = (struct xpnet_dev_private *)xpnet_device->priv; @@ -201,7 +184,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) /* * The allocated skb has some reserved space. - * In order to use bte_copy, we need to get the + * In order to use xp_remote_memcpy(), we need to get the * skb->data pointer moved forward. */ skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & @@ -226,26 +209,21 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes); } else { + dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1)); dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" - "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, - (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), - msg->size); - - bret = bte_copy(msg->buf_pa, - __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), - msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst, + (void *)msg->buf_pa, msg->size); - if (bret != BTE_SUCCESS) { + ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size); + if (ret != xpSuccess) { /* - * >>> Need better way of cleaning skb. Currently skb - * >>> appears in_use and we can't just call - * >>> dev_kfree_skb. + * !!! Need better way of cleaning skb. Currently skb + * !!! appears in_use and we can't just call + * !!! dev_kfree_skb. */ - dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " - "error=0x%x\n", (void *)msg->buf_pa, - (void *)__pa((u64)skb->data & - ~(L1_CACHE_BYTES - 1)), - msg->size, bret); + dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) " + "returned error=0x%x\n", dst, + (void *)msg->buf_pa, msg->size, ret); xpc_received(partid, channel, (void *)msg); @@ -285,9 +263,7 @@ static void xpnet_connection_activity(enum xp_retval reason, short partid, int channel, void *data, void *key) { - long bp; - - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(channel != XPC_NET_CHANNEL); switch (reason) { @@ -299,31 +275,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel, case xpConnected: /* connection completed to a partition */ spin_lock_bh(&xpnet_broadcast_lock); - xpnet_broadcast_partitions |= 1UL << (partid - 1); - bp = xpnet_broadcast_partitions; + __set_bit(partid, xpnet_broadcast_partitions); spin_unlock_bh(&xpnet_broadcast_lock); netif_carrier_on(xpnet_device); - dev_dbg(xpnet, "%s connection created to partition %d; " - "xpnet_broadcast_partitions=0x%lx\n", - xpnet_device->name, partid, bp); + dev_dbg(xpnet, "%s connected to partition %d\n", + xpnet_device->name, partid); break; default: spin_lock_bh(&xpnet_broadcast_lock); - xpnet_broadcast_partitions &= ~(1UL << (partid - 1)); - bp = xpnet_broadcast_partitions; + __clear_bit(partid, xpnet_broadcast_partitions); spin_unlock_bh(&xpnet_broadcast_lock); - if (bp == 0) + if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions, + xp_max_npartitions)) { netif_carrier_off(xpnet_device); + } - dev_dbg(xpnet, "%s disconnected from partition %d; " - "xpnet_broadcast_partitions=0x%lx\n", - xpnet_device->name, partid, bp); + dev_dbg(xpnet, "%s disconnected from partition %d\n", + xpnet_device->name, partid); break; - } } @@ -334,8 +307,10 @@ xpnet_dev_open(struct net_device *dev) dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, - XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, - XPNET_MAX_IDLE_KTHREADS); + (unsigned long)XPNET_MSG_SIZE, + (unsigned long)XPNET_MSG_NENTRIES, + (unsigned long)XPNET_MAX_KTHREADS, + (unsigned long)XPNET_MAX_IDLE_KTHREADS); ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, @@ -426,35 +401,74 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel, } } +static void +xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, + u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid) +{ + u8 msg_buffer[XPNET_MSG_SIZE]; + struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer; + u16 msg_size = sizeof(struct xpnet_message); + enum xp_retval ret; + + msg->embedded_bytes = embedded_bytes; + if (unlikely(embedded_bytes != 0)) { + msg->version = XPNET_VERSION_EMBED; + dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", + &msg->data, skb->data, (size_t)embedded_bytes); + skb_copy_from_linear_data(skb, &msg->data, + (size_t)embedded_bytes); + msg_size += embedded_bytes - 1; + } else { + msg->version = XPNET_VERSION; + } + msg->magic = XPNET_MAGIC; + msg->size = end_addr - start_addr; + msg->leadin_ignore = (u64)skb->data - start_addr; + msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); + msg->buf_pa = xp_pa((void *)start_addr); + + dev_dbg(xpnet, "sending XPC message to %d:%d\n" + KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", + dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); + + atomic_inc(&queued_msg->use_count); + + ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg, + msg_size, xpnet_send_completed, queued_msg); + if (unlikely(ret != xpSuccess)) + atomic_dec(&queued_msg->use_count); +} + /* * Network layer has formatted a packet (skb) and is ready to place it * "on the wire". Prepare and send an xpnet_message to all partitions * which have connected with us and are targets of this packet. * * MAC-NOTE: For the XPNET driver, the MAC address contains the - * destination partition_id. If the destination partition id word - * is 0xff, this packet is to broadcast to all partitions. + * destination partid. If the destination partid octets are 0xffff, + * this packet is to be broadcast to all connected partitions. */ static int xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct xpnet_pending_msg *queued_msg; - enum xp_retval ret; - struct xpnet_message *msg; u64 start_addr, end_addr; - long dp; - u8 second_mac_octet; short dest_partid; - struct xpnet_dev_private *priv; - u16 embedded_bytes; - - priv = (struct xpnet_dev_private *)dev->priv; + struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv; + u16 embedded_bytes = 0; dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); + if (skb->data[0] == 0x33) { + dev_kfree_skb(skb); + return 0; /* nothing needed to be done */ + } + /* * The xpnet_pending_msg tracks how many outstanding * xpc_send_notifies are relying on this skb. When none @@ -466,7 +480,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) "packet\n", sizeof(struct xpnet_pending_msg)); priv->stats.tx_errors++; - return -ENOMEM; } @@ -475,7 +488,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); /* calculate how many bytes to embed in the XPC message */ - embedded_bytes = 0; if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { /* skb->data does fit so embed */ embedded_bytes = skb->len; @@ -491,82 +503,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) atomic_set(&queued_msg->use_count, 1); queued_msg->skb = skb; - second_mac_octet = skb->data[XPNET_PARTID_OCTET]; - if (second_mac_octet == 0xff) { + if (skb->data[0] == 0xff) { /* we are being asked to broadcast to all partitions */ - dp = xpnet_broadcast_partitions; - } else if (second_mac_octet != 0) { - dp = xpnet_broadcast_partitions & - (1UL << (second_mac_octet - 1)); - } else { - /* 0 is an invalid partid. Ignore */ - dp = 0; - } - dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); - - /* - * If we wanted to allow promiscuous mode to work like an - * unswitched network, this would be a good point to OR in a - * mask of partitions which should be receiving all packets. - */ - - /* - * Main send loop. - */ - for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; - dest_partid++) { + for_each_bit(dest_partid, xpnet_broadcast_partitions, + xp_max_npartitions) { - if (!(dp & (1UL << (dest_partid - 1)))) { - /* not destined for this partition */ - continue; + xpnet_send(skb, queued_msg, start_addr, end_addr, + embedded_bytes, dest_partid); } + } else { + dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1]; + dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8; - /* remove this partition from the destinations mask */ - dp &= ~(1UL << (dest_partid - 1)); - - /* found a partition to send to */ - - ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, - XPC_NOWAIT, (void **)&msg); - if (unlikely(ret != xpSuccess)) - continue; - - msg->embedded_bytes = embedded_bytes; - if (unlikely(embedded_bytes != 0)) { - msg->version = XPNET_VERSION_EMBED; - dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", - &msg->data, skb->data, (size_t)embedded_bytes); - skb_copy_from_linear_data(skb, &msg->data, - (size_t)embedded_bytes); - } else { - msg->version = XPNET_VERSION; - } - msg->magic = XPNET_MAGIC; - msg->size = end_addr - start_addr; - msg->leadin_ignore = (u64)skb->data - start_addr; - msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); - msg->buf_pa = __pa(start_addr); - - dev_dbg(xpnet, "sending XPC message to %d:%d\n" - KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " - "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", - dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, - msg->leadin_ignore, msg->tailout_ignore); - - atomic_inc(&queued_msg->use_count); - - ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, - xpnet_send_completed, queued_msg); - if (unlikely(ret != xpSuccess)) { - atomic_dec(&queued_msg->use_count); - continue; + if (dest_partid >= 0 && + dest_partid < xp_max_npartitions && + test_bit(dest_partid, xpnet_broadcast_partitions) != 0) { + + xpnet_send(skb, queued_msg, start_addr, end_addr, + embedded_bytes, dest_partid); } } if (atomic_dec_return(&queued_msg->use_count) == 0) { - dev_dbg(xpnet, "no partitions to receive packet destined for " - "%d\n", dest_partid); - dev_kfree_skb(skb); kfree(queued_msg); } @@ -594,23 +552,28 @@ xpnet_dev_tx_timeout(struct net_device *dev) static int __init xpnet_init(void) { - int i; - u32 license_num; - int result = -ENOMEM; + int result; - if (!ia64_platform_is("sn2")) + if (!is_shub() && !is_uv()) return -ENODEV; dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); + xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) * + sizeof(long), GFP_KERNEL); + if (xpnet_broadcast_partitions == NULL) + return -ENOMEM; + /* * use ether_setup() to init the majority of our device * structure and then override the necessary pieces. */ xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), XPNET_DEVICE_NAME, ether_setup); - if (xpnet_device == NULL) + if (xpnet_device == NULL) { + kfree(xpnet_broadcast_partitions); return -ENOMEM; + } netif_carrier_off(xpnet_device); @@ -628,14 +591,10 @@ xpnet_init(void) * MAC addresses. We chose the first octet of the MAC to be unlikely * to collide with any vendor's officially issued MAC. */ - xpnet_device->dev_addr[0] = 0xfe; - xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; - license_num = sn_partition_serial_number_val(); - for (i = 3; i >= 0; i--) { - xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = - license_num & 0xff; - license_num = license_num >> 8; - } + xpnet_device->dev_addr[0] = 0x02; /* locally administered, no OUI */ + + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id; + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8); /* * ether_setup() sets this to a multicast device. We are @@ -651,8 +610,10 @@ xpnet_init(void) xpnet_device->features = NETIF_F_NO_CSUM; result = register_netdev(xpnet_device); - if (result != 0) + if (result != 0) { free_netdev(xpnet_device); + kfree(xpnet_broadcast_partitions); + } return result; } @@ -666,8 +627,8 @@ xpnet_exit(void) xpnet_device[0].name); unregister_netdev(xpnet_device); - free_netdev(xpnet_device); + kfree(xpnet_broadcast_partitions); } module_exit(xpnet_exit); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 66e5a5487c20..86dbb366415a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -213,7 +213,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1, sg_pos, data_size; + int ret = 1, data_size, i; + struct scatterlist *sg; mmc_claim_host(card->host); @@ -267,18 +268,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_pre(mq); + /* + * Adjust the sg list so it is the same size as the + * request. + */ if (brq.data.blocks != (req->nr_sectors >> (md->block_bits - 9))) { data_size = brq.data.blocks * brq.data.blksz; - for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) { - data_size -= mq->sg[sg_pos].length; + for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { + data_size -= sg->length; if (data_size <= 0) { - mq->sg[sg_pos].length += data_size; - sg_pos++; + sg->length += data_size; + i++; break; } } - brq.data.sg_len = sg_pos; + brq.data.sg_len = i; } mmc_wait_for_req(card->host, &brq.mrq); diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index a067fe436301..f26b01d811ae 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test, int ret, i; unsigned long flags; - BUG_ON(blocks * blksz > BUFFER_SIZE); - if (write) { for (i = 0;i < blocks * blksz;i++) test->scratch[i] = i; } else { - memset(test->scratch, 0, blocks * blksz); + memset(test->scratch, 0, BUFFER_SIZE); } local_irq_save(flags); - sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); ret = mmc_test_set_blksize(test, blksz); @@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test, } } else { local_irq_save(flags); - sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); for (i = 0;i < blocks * blksz;i++) { if (test->scratch[i] != (u8)i) @@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) return 0; } -static int mmc_test_bigsg_write(struct mmc_test_card *test) -{ - int ret; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - memset(test->buffer, 0, BUFFER_SIZE); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); - if (ret) - return ret; - - return 0; -} - -static int mmc_test_bigsg_read(struct mmc_test_card *test) -{ - int ret, i; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - memset(test->buffer, 0xCD, BUFFER_SIZE); - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); - if (ret) - return ret; - - /* mmc_test_transfer() doesn't check for read overflows */ - for (i = size;i < BUFFER_SIZE;i++) { - if (test->buffer[i] != 0xCD) - return RESULT_FAIL; - } - - return 0; -} - #ifdef CONFIG_HIGHMEM static int mmc_test_write_high(struct mmc_test_card *test) @@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = { .run = mmc_test_multi_xfersize_read, }, - { - .name = "Over-sized SG list write", - .prepare = mmc_test_prepare_write, - .run = mmc_test_bigsg_write, - .cleanup = mmc_test_cleanup, - }, - - { - .name = "Over-sized SG list read", - .prepare = mmc_test_prepare_read, - .run = mmc_test_bigsg_read, - .cleanup = mmc_test_cleanup, - }, - #ifdef CONFIG_HIGHMEM { diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 3ee5b8c3b5ce..044d84eeed7c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) { #ifdef CONFIG_MMC_DEBUG unsigned int i, sz; + struct scatterlist *sg; #endif pr_debug("%s: starting CMD%u arg %08x flags %08x\n", @@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) #ifdef CONFIG_MMC_DEBUG sz = 0; - for (i = 0;i < mrq->data->sg_len;i++) - sz += mrq->data->sg[i].length; + for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) + sz += sg->length; BUG_ON(sz != mrq->data->blocks * mrq->data->blksz); #endif diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 99b20917cc0f..d3f55615c099 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -61,7 +61,13 @@ /* Hardware definitions */ #define AU1XMMC_DESCRIPTOR_COUNT 1 -#define AU1XMMC_DESCRIPTOR_SIZE 2048 + +/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */ +#ifdef CONFIG_SOC_AU1100 +#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff +#else /* Au1200 */ +#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff +#endif #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index deb607c52c0d..fcb14c2346cc 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST; + SDHCI_QUIRK_RESET_AFTER_REQUEST | + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5f95e10229b5..e3a8133560a2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host) else mask = SDHCI_SPACE_AVAILABLE; + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits + * for transfers < 4 bytes. As long as it is just one block, + * we can ignore the bits. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) && + (host->data->blocks == 1)) + mask = ~0; + while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { if (host->data->flags & MMC_DATA_READ) sdhci_read_block_pio(host); @@ -439,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->adma_addr = dma_map_single(mmc_dev(host->mmc), host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); - if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) + if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr)) goto unmap_entries; BUG_ON(host->adma_addr & 0x3); @@ -645,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { writel(host->adma_addr, host->ioaddr + SDHCI_ADMA_ADDRESS); @@ -664,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { WARN_ON(sg_cnt != 1); writel(sg_dma_address(data->sg), diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index e354faee5df0..197d4a05f4ae 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -206,6 +206,8 @@ struct sdhci_host { #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) /* Controller provides an incorrect timeout value for transfers */ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index dbba5abf0db8..f84ab6182148 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -41,7 +41,7 @@ /* AMD */ -#define AM29DL800BB 0x22C8 +#define AM29DL800BB 0x22CB #define AM29DL800BT 0x224A #define AM29F800BB 0x2258 diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 54e36bfc2c3b..8bd0dea6885f 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -15,6 +15,8 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/mutex.h> +#include <linux/err.h> + #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name, device->write = dataflash_write; device->priv = priv; - dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, " - "erasesize %d bytes\n", name, device->size/1024, - pagesize, pagesize * 8); /* 8 pages = 1 block */ + dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n", + name, DIV_ROUND_UP(device->size, 1024), pagesize); dev_set_drvdata(&spi->dev, priv); if (mtd_has_partitions()) { @@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name, return add_mtd_device(device) == 1 ? -ENODEV : 0; } -/* - * Detect and initialize DataFlash device: - * - * Device Density ID code #Pages PageSize Offset - * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 - * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 - * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 - * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 - * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 - * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 - * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 - * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 - */ - struct flash_info { char *name; - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. + /* JEDEC id has a high byte of zero plus three data bytes: + * the manufacturer id, then a two byte device id. */ uint32_t jedec_id; - /* The size listed here is what works with OPCODE_SE, which isn't - * necessarily called a "sector" by the vendor. - */ + /* The size listed here is what works with OP_ERASE_PAGE. */ unsigned nr_pages; uint16_t pagesize; uint16_t pageoffset; uint16_t flags; -#define SUP_POW2PS 0x02 -#define IS_POW2PS 0x01 +#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ +#define IS_POW2PS 0x0001 /* uses 2^N byte pages */ }; static struct flash_info __devinitdata dataflash_data [] = { - { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + /* + * NOTE: chips with SUP_POW2PS (rev D and up) need two entries, + * one with IS_POW2PS and the other without. The entry with the + * non-2^N byte page size can't name exact chip revisions without + * losing backwards compatibility for cmdlinepart. + * + * These newer chips also support 128-byte security registers (with + * 64 bytes one-time-programmable) and software write-protection. + */ + { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS}, { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "at45db321c", 0x1f2700, 8192, 528, 10, }, + { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */ - { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, - { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, + { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, }; static struct flash_info *__devinit jedec_probe(struct spi_device *spi) @@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) struct flash_info *info; int status; - /* JEDEC also defines an optional "extended device information" * string for after vendor-specific data, after the three bytes * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. */ tmp = spi_write_then_read(spi, &code, 1, id, 3); if (tmp < 0) { DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", spi->dev.bus_id, tmp); - return NULL; + return ERR_PTR(tmp); } + if (id[0] != 0x1f) + return NULL; + jedec = id[0]; jedec = jedec << 8; jedec |= id[1]; @@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) tmp < ARRAY_SIZE(dataflash_data); tmp++, info++) { if (info->jedec_id == jedec) { + DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n", + dev_name(&spi->dev), + (info->flags & SUP_POW2PS) + ? ", binary pagesize" : "" + ); if (info->flags & SUP_POW2PS) { status = dataflash_status(spi); - if (status & 0x1) - /* return power of 2 pagesize */ - return ++info; - else - return info; + if (status < 0) { + DEBUG(MTD_DEBUG_LEVEL1, + "%s: status error %d\n", + dev_name(&spi->dev), status); + return ERR_PTR(status); + } + if (status & 0x1) { + if (info->flags & IS_POW2PS) + return info; + } else { + if (!(info->flags & IS_POW2PS)) + return info; + } } } } - return NULL; + + /* + * Treat other chips as errors ... we won't know the right page + * size (it might be binary) even when we can tell which density + * class is involved (legacy chip id scheme). + */ + dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec); + return ERR_PTR(-ENODEV); } +/* + * Detect and initialize DataFlash device, using JEDEC IDs on newer chips + * or else the ID code embedded in the status bits: + * + * Device Density ID code #Pages PageSize Offset + * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 + * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 + * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 + * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 + * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 + * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 + * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 + */ static int __devinit dataflash_probe(struct spi_device *spi) { int status; @@ -632,14 +665,17 @@ static int __devinit dataflash_probe(struct spi_device *spi) * If it succeeds we know we have either a C or D part. * D will support power of 2 pagesize option. */ - info = jedec_probe(spi); - + if (IS_ERR(info)) + return PTR_ERR(info); if (info != NULL) return add_dataflash(spi, info->name, info->nr_pages, info->pagesize, info->pageoffset); - + /* + * Older chips support only legacy commands, identifing + * capacity using bits in the status byte. + */ status = dataflash_status(spi); if (status <= 0 || status == 0xff) { DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n", @@ -661,13 +697,13 @@ static int __devinit dataflash_probe(struct spi_device *spi) status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9); break; case 0x1c: /* 0 1 1 1 x x */ - status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9); + status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); break; case 0x24: /* 1 0 0 1 x x */ status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); break; case 0x2c: /* 1 0 1 1 x x */ - status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10); + status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); break; case 0x34: /* 1 1 0 1 x x */ status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 28cc6787a800..9b6af7e74a65 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -125,7 +125,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, int (*fill_super)(struct super_block *, void *, int), struct vfsmount *mnt) { - struct nameidata nd; + struct block_device *bdev; int mtdnr, ret; if (!dev_name) @@ -181,29 +181,20 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, /* try the old way - the hack where we allowed users to mount * /dev/mtdblock$(n) but didn't actually _use_ the blockdev */ - ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd); - - DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n", - ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL); - - if (ret) + bdev = lookup_bdev(dev_name); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret); return ret; - - ret = -EINVAL; - - if (!S_ISBLK(nd.path.dentry->d_inode->i_mode)) - goto out; - - if (nd.path.mnt->mnt_flags & MNT_NODEV) { - ret = -EACCES; - goto out; } + DEBUG(1, "MTDSB: lookup_bdev() returned 0\n"); - if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR) + ret = -EINVAL; + if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR) goto not_an_MTD_device; - mtdnr = iminor(nd.path.dentry->d_inode); - path_put(&nd.path); + mtdnr = MINOR(bdev->bd_dev); + bdput(bdev); return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super, mnt); @@ -213,10 +204,8 @@ not_an_MTD_device: printk(KERN_NOTICE "MTD: Attempt to mount non-MTD device \"%s\"\n", dev_name); -out: - path_put(&nd.path); + bdput(bdev); return ret; - } EXPORT_SYMBOL_GPL(get_sb_mtd); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 71406e517857..02f9cc30d77b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -104,11 +104,24 @@ config MTD_NAND_BF5XX config MTD_NAND_BF5XX_HWECC bool "BF5XX NAND Hardware ECC" + default y depends on MTD_NAND_BF5XX help Enable the use of the BF5XX's internal ECC generator when using NAND. +config MTD_NAND_BF5XX_BOOTROM_ECC + bool "Use Blackfin BootROM ECC Layout" + default n + depends on MTD_NAND_BF5XX_HWECC + help + If you wish to modify NAND pages and allow the Blackfin on-chip + BootROM to boot from them, say Y here. This is only necessary + if you are booting U-Boot out of NAND and you wish to update + U-Boot from Linux' userspace. Otherwise, you should say N here. + + If unsure, say N. + config MTD_NAND_RTC_FROM4 tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)" depends on SH_SOLUTION_ENGINE diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index e87a57297328..9af2a2cc1153 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] = P_NAND_ALE, 0}; +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC +static uint8_t bbt_pattern[] = { 0xff }; + +static struct nand_bbt_descr bootrom_bbt = { + .options = 0, + .offs = 63, + .len = 1, + .pattern = bbt_pattern, +}; + +static struct nand_ecclayout bootrom_ecclayout = { + .eccbytes = 24, + .eccpos = { + 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, + 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, + 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, + 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, + 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, + 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, + 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, + 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 + }, + .oobfree = { + { 0x8 * 0 + 3, 5 }, + { 0x8 * 1 + 3, 5 }, + { 0x8 * 2 + 3, 5 }, + { 0x8 * 3 + 3, 5 }, + { 0x8 * 4 + 3, 5 }, + { 0x8 * 5 + 3, 5 }, + { 0x8 * 6 + 3, 5 }, + { 0x8 * 7 + 3, 5 }, + } +}; +#endif + /* * Data structures for bf5xx nand flash controller driver */ @@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, dat += 256; read_ecc += 8; calc_ecc += 8; - ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); + ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); } return ret; @@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, ecc0 = bfin_read_NFC_ECC0(); ecc1 = bfin_read_NFC_ECC1(); - code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); @@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, if (page_size == 512) { ecc0 = bfin_read_NFC_ECC2(); ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); /* second 3 bytes in ecc_code for second 256 * bytes of 512 page size @@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, /* * System initialization functions */ - static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) { int ret; @@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) return 0; } +static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info) +{ + /* Free NFC DMA channel */ + if (hardware_ecc) + free_dma(CH_NFC); +} + /* * BF5XX NFC hardware initialization * - pin mux setup @@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info) #endif } -static int bf5xx_nand_remove(struct platform_device *pdev) +static int __devexit bf5xx_nand_remove(struct platform_device *pdev) { struct bf5xx_nand_info *info = to_nand_info(pdev); struct mtd_info *mtd = NULL; @@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev) } peripheral_free_list(bfin_nfc_pin_req); + bf5xx_nand_dma_remove(info); /* free the common resources */ kfree(info); @@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev) * it can allocate all necessary resources then calls the * nand layer to look for devices */ -static int bf5xx_nand_probe(struct platform_device *pdev) +static int __devinit bf5xx_nand_probe(struct platform_device *pdev) { struct bf5xx_nand_platform *plat = to_nand_plat(pdev); struct bf5xx_nand_info *info = NULL; @@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "(%p)\n", pdev); - if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); - return -EFAULT; - } - if (!plat) { dev_err(&pdev->dev, "no platform specific information\n"); - goto exit_error; + return -EINVAL; + } + + if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { + dev_err(&pdev->dev, "requesting Peripherals failed\n"); + return -EFAULT; } info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) { dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; - goto exit_error; + goto out_err_kzalloc; } platform_set_drvdata(pdev, info); @@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* initialise the hardware */ err = bf5xx_nand_hw_init(info); - if (err != 0) - goto exit_error; + if (err) + goto out_err_hw_init; /* setup hardware ECC data struct */ if (hardware_ecc) { +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC + chip->badblock_pattern = &bootrom_bbt; + chip->ecc.layout = &bootrom_ecclayout; +#endif + if (plat->page_size == NFC_PG_SIZE_256) { chip->ecc.bytes = 3; chip->ecc.size = 256; @@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* scan hardware nand chip and setup mtd info data struct */ if (nand_scan(mtd, 1)) { err = -ENXIO; - goto exit_error; + goto out_err_nand_scan; } /* add NAND partition */ @@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "initialised ok\n"); return 0; -exit_error: - bf5xx_nand_remove(pdev); +out_err_nand_scan: + bf5xx_nand_dma_remove(info); +out_err_hw_init: + platform_set_drvdata(pdev, NULL); + kfree(info); +out_err_kzalloc: + peripheral_free_list(bfin_nfc_pin_req); - if (err == 0) - err = -EINVAL; return err; } @@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev) /* driver device registration */ static struct platform_driver bf5xx_nand_driver = { .probe = bf5xx_nand_probe, - .remove = bf5xx_nand_remove, + .remove = __devexit_p(bf5xx_nand_remove), .suspend = bf5xx_nand_suspend, .resume = bf5xx_nand_resume, .driver = { diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 765d4f0f7c86..e4226e02d63e 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 9dff51351f4f..98ad3cefcaf4 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, goto err; } - priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start); + priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); if (!priv->mtd.name) { ret = -ENOMEM; goto err; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index ecd70e2504f6..556e8131ecdc 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -28,6 +28,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/vmalloc.h> +#include <asm/div64.h> #include <linux/slab.h> #include <linux/errno.h> #include <linux/string.h> @@ -207,13 +208,16 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define STATE_CMD_READID 0x0000000A /* read ID */ #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ #define STATE_CMD_RESET 0x0000000C /* reset */ +#define STATE_CMD_RNDOUT 0x0000000D /* random output command */ +#define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */ #define STATE_CMD_MASK 0x0000000F /* command states mask */ /* After an address is input, the simulator goes to one of these states */ #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */ #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */ -#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */ -#define STATE_ADDR_MASK 0x00000030 /* address states mask */ +#define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */ +#define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */ +#define STATE_ADDR_MASK 0x00000070 /* address states mask */ /* Durind data input/output the simulator is in these states */ #define STATE_DATAIN 0x00000100 /* waiting for data input */ @@ -240,7 +244,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */ #define ACTION_MASK 0x00700000 /* action mask */ -#define NS_OPER_NUM 12 /* Number of operations supported by the simulator */ +#define NS_OPER_NUM 13 /* Number of operations supported by the simulator */ #define NS_OPER_STATES 6 /* Maximum number of states in operation */ #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ @@ -373,7 +377,10 @@ static struct nandsim_operations { {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}}, /* Large page devices read page */ {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY, - STATE_DATAOUT, STATE_READY}} + STATE_DATAOUT, STATE_READY}}, + /* Large page devices random page read */ + {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY, + STATE_DATAOUT, STATE_READY}}, }; struct weak_block { @@ -579,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd) if (ns->busw == 16) NS_WARN("16-bit flashes support wasn't tested\n"); - printk("flash size: %llu MiB\n", ns->geom.totsz >> 20); + printk("flash size: %llu MiB\n", + (unsigned long long)ns->geom.totsz >> 20); printk("page size: %u bytes\n", ns->geom.pgsz); printk("OOB area size: %u bytes\n", ns->geom.oobsz); printk("sector size: %u KiB\n", ns->geom.secsz >> 10); @@ -588,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd) printk("bus width: %u\n", ns->busw); printk("bits in sector size: %u\n", ns->geom.secshift); printk("bits in page size: %u\n", ns->geom.pgshift); - printk("bits in OOB size: %u\n", ns->geom.oobshift); - printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10); + printk("bits in OOB size: %u\n", ns->geom.oobshift); + printk("flash size with OOB: %llu KiB\n", + (unsigned long long)ns->geom.totszoob >> 10); printk("page address bytes: %u\n", ns->geom.pgaddrbytes); printk("sector address bytes: %u\n", ns->geom.secaddrbytes); printk("options: %#x\n", ns->options); @@ -937,12 +946,18 @@ static char *get_state_name(uint32_t state) return "STATE_CMD_ERASE2"; case STATE_CMD_RESET: return "STATE_CMD_RESET"; + case STATE_CMD_RNDOUT: + return "STATE_CMD_RNDOUT"; + case STATE_CMD_RNDOUTSTART: + return "STATE_CMD_RNDOUTSTART"; case STATE_ADDR_PAGE: return "STATE_ADDR_PAGE"; case STATE_ADDR_SEC: return "STATE_ADDR_SEC"; case STATE_ADDR_ZERO: return "STATE_ADDR_ZERO"; + case STATE_ADDR_COLUMN: + return "STATE_ADDR_COLUMN"; case STATE_DATAIN: return "STATE_DATAIN"; case STATE_DATAOUT: @@ -973,6 +988,7 @@ static int check_command(int cmd) switch (cmd) { case NAND_CMD_READ0: + case NAND_CMD_READ1: case NAND_CMD_READSTART: case NAND_CMD_PAGEPROG: case NAND_CMD_READOOB: @@ -982,7 +998,8 @@ static int check_command(int cmd) case NAND_CMD_READID: case NAND_CMD_ERASE2: case NAND_CMD_RESET: - case NAND_CMD_READ1: + case NAND_CMD_RNDOUT: + case NAND_CMD_RNDOUTSTART: return 0; case NAND_CMD_STATUS_MULTI: @@ -1021,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command) return STATE_CMD_ERASE2; case NAND_CMD_RESET: return STATE_CMD_RESET; + case NAND_CMD_RNDOUT: + return STATE_CMD_RNDOUT; + case NAND_CMD_RNDOUTSTART: + return STATE_CMD_RNDOUTSTART; } NS_ERR("get_state_by_command: unknown command, BUG\n"); @@ -1582,6 +1603,11 @@ static void switch_state(struct nandsim *ns) ns->regs.num = 1; break; + case STATE_ADDR_COLUMN: + /* Column address is always 2 bytes */ + ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes; + break; + default: NS_ERR("switch_state: BUG! unknown address state\n"); } @@ -1693,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) return; } - /* - * Chip might still be in STATE_DATAOUT - * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or - * STATE_DATAOUT_STATUS_M state. If so, switch state. - */ + /* Check that the command byte is correct */ + if (check_command(byte)) { + NS_ERR("write_byte: unknown command %#x\n", (uint)byte); + return; + } + if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M - || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT)) + || NS_STATE(ns->state) == STATE_DATAOUT) { + int row = ns->regs.row; + switch_state(ns); + if (byte == NAND_CMD_RNDOUT) + ns->regs.row = row; + } /* Check if chip is expecting command */ if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) { @@ -1715,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); } - /* Check that the command byte is correct */ - if (check_command(byte)) { - NS_ERR("write_byte: unknown command %#x\n", (uint)byte); - return; - } - NS_DBG("command byte corresponding to %s state accepted\n", get_state_name(get_state_by_command(byte))); ns->regs.command = byte; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fa533c27052a..8a03875ec877 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -510,14 +510,14 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710 and SH7712. + This driver support SH7710, SH7712 and SH7763. config SUNLANCE tristate "Sun LANCE support" diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index a8ec60e1ed75..3db7db1828e7 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -605,36 +605,87 @@ adjust_head: static int bfin_mac_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - unsigned int data; + u16 *data; current_tx_ptr->skb = skb; - /* - * Is skb->data always 16-bit aligned? - * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)? - */ - if ((((unsigned int)(skb->data)) & 0x02) == 2) { - /* move skb->data to current_tx_ptr payload */ - data = (unsigned int)(skb->data) - 2; - *((unsigned short *)data) = (unsigned short)(skb->len); - current_tx_ptr->desc_a.start_addr = (unsigned long)data; - /* this is important! */ - blackfin_dcache_flush_range(data, (data + (skb->len)) + 2); - + if (ANOMALY_05000285) { + /* + * TXDWA feature is not avaible to older revision < 0.3 silicon + * of BF537 + * + * Only if data buffer is ODD WORD alignment, we do not + * need to memcpy + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x2) { + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range((u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } else { - *((unsigned short *)(current_tx_ptr->packet)) = - (unsigned short)(skb->len); - memcpy((char *)(current_tx_ptr->packet + 2), skb->data, - (skb->len)); - current_tx_ptr->desc_a.start_addr = - (unsigned long)current_tx_ptr->packet; - if (current_tx_ptr->status.status_word != 0) - current_tx_ptr->status.status_word = 0; - blackfin_dcache_flush_range((unsigned int)current_tx_ptr-> - packet, - (unsigned int)(current_tx_ptr-> - packet + skb->len) + - 2); + /* + * TXDWA feature is avaible to revision < 0.3 silicon of + * BF537 and always avaible to BF52x + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x0) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl |= TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 2; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else if (data_align == 0x2) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } /* enable this packet's dma */ @@ -691,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev) (unsigned long)skb->tail); dev->last_rx = jiffies; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); #if defined(BFIN_MAC_CSUM_OFFLOAD) skb->csum = current_rx_ptr->status.ip_payload_csum; @@ -920,6 +970,7 @@ static int bfin_mac_open(struct net_device *dev) phy_start(lp->phydev); phy_write(lp->phydev, MII_BMCR, BMCR_RESET); setup_system_regs(dev); + setup_mac_addr(dev->dev_addr); bfin_mac_disable(); bfin_mac_enable(); pr_debug("hardware init finished\n"); @@ -955,7 +1006,7 @@ static int bfin_mac_close(struct net_device *dev) return 0; } -static int __init bfin_mac_probe(struct platform_device *pdev) +static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; struct bfin_mac_local *lp; @@ -1081,7 +1132,7 @@ out_err_probe_mac: return rc; } -static int bfin_mac_remove(struct platform_device *pdev) +static int __devexit bfin_mac_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct bfin_mac_local *lp = netdev_priv(ndev); @@ -1128,7 +1179,7 @@ static int bfin_mac_resume(struct platform_device *pdev) static struct platform_driver bfin_mac_driver = { .probe = bfin_mac_probe, - .remove = bfin_mac_remove, + .remove = __devexit_p(bfin_mac_remove), .resume = bfin_mac_resume, .suspend = bfin_mac_suspend, .driver = { diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 47d51788a462..04c0e90119af 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -683,7 +683,7 @@ enum { SF_ERASE_SECTOR = 0xd8, /* erase sector */ FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */ - FW_VERS_ADDR = 0x77ffc, /* flash address holding FW version */ + FW_VERS_ADDR = 0x7fffc, /* flash address holding FW version */ FW_MIN_SIZE = 8 /* at least version and csum */ }; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 0920b796bd78..b70c5314f537 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work) } } } - mutex_unlock(&dlpar_mem_lock); - ehea_info("re-initializing driver complete"); + ehea_info("re-initializing driver complete"); out: + mutex_unlock(&dlpar_mem_lock); return; } diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c05cb159c772..aa0bf6e1c694 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi) random_ether_addr(dev->dev_addr); enc28j60_set_hw_macaddr(dev); - ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING, - DRV_NAME, priv); + /* Board setup must set the relevant edge trigger type; + * level triggers won't currently work. + */ + ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv); if (ret < 0) { if (netif_msg_probe(priv)) dev_err(&spi->dev, DRV_NAME ": request irq %d failed " diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 4ed89fa9ae46..01b38b092c76 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -333,6 +333,7 @@ enum { NvRegPowerState2 = 0x600, #define NVREG_POWERSTATE2_POWERUP_MASK 0x0F11 #define NVREG_POWERSTATE2_POWERUP_REV_A3 0x0001 +#define NVREG_POWERSTATE2_PHY_RESET 0x0004 }; /* Big endian: should work, but is untested */ @@ -529,6 +530,7 @@ union ring_type { #define PHY_REALTEK_INIT_REG4 0x14 #define PHY_REALTEK_INIT_REG5 0x18 #define PHY_REALTEK_INIT_REG6 0x11 +#define PHY_REALTEK_INIT_REG7 0x01 #define PHY_REALTEK_INIT1 0x0000 #define PHY_REALTEK_INIT2 0x8e00 #define PHY_REALTEK_INIT3 0x0001 @@ -537,6 +539,9 @@ union ring_type { #define PHY_REALTEK_INIT6 0xf5c7 #define PHY_REALTEK_INIT7 0x1000 #define PHY_REALTEK_INIT8 0x0003 +#define PHY_REALTEK_INIT9 0x0008 +#define PHY_REALTEK_INIT10 0x0005 +#define PHY_REALTEK_INIT11 0x0200 #define PHY_REALTEK_INIT_MSK1 0x0003 #define PHY_GIGABIT 0x0100 @@ -1149,6 +1154,42 @@ static int phy_init(struct net_device *dev) return PHY_ERROR; } } + if (np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + u32 powerstate = readl(base + NvRegPowerState2); + + /* need to perform hw phy reset */ + powerstate |= NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + powerstate &= ~NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ); + reg |= PHY_REALTEK_INIT9; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ); + if (!(reg & PHY_REALTEK_INIT11)) { + reg |= PHY_REALTEK_INIT11; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } if (np->phy_model == PHY_MODEL_REALTEK_8201) { if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 || np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 || @@ -1201,12 +1242,23 @@ static int phy_init(struct net_device *dev) mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); mii_control |= BMCR_ANENABLE; - /* reset the phy - * (certain phys need bmcr to be setup with reset) - */ - if (phy_reset(dev, mii_control)) { - printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_oui == PHY_OUI_REALTEK && + np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + /* start autoneg since we already performed hw reset above */ + mii_control |= BMCR_ANRESTART; + if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { + printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } else { + /* reset the phy + * (certain phys need bmcr to be setup with reset) + */ + if (phy_reset(dev, mii_control)) { + printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } } /* phy vendor specific configuration */ diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 0960e69b2da4..e4fbefc8c82f 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -69,18 +69,20 @@ static void ri_tasklet(unsigned long dev) struct net_device *_dev = (struct net_device *)dev; struct ifb_private *dp = netdev_priv(_dev); struct net_device_stats *stats = &_dev->stats; + struct netdev_queue *txq; struct sk_buff *skb; + txq = netdev_get_tx_queue(_dev, 0); dp->st_task_enter++; if ((skb = skb_peek(&dp->tq)) == NULL) { dp->st_txq_refl_try++; - if (netif_tx_trylock(_dev)) { + if (__netif_tx_trylock(txq)) { dp->st_rxq_enter++; while ((skb = skb_dequeue(&dp->rq)) != NULL) { skb_queue_tail(&dp->tq, skb); dp->st_rx2tx_tran++; } - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); } else { /* reschedule */ dp->st_rxq_notenter++; @@ -115,7 +117,7 @@ static void ri_tasklet(unsigned long dev) BUG(); } - if (netif_tx_trylock(_dev)) { + if (__netif_tx_trylock(txq)) { dp->st_rxq_check++; if ((skb = skb_peek(&dp->rq)) == NULL) { dp->tasklet_pending = 0; @@ -123,10 +125,10 @@ static void ri_tasklet(unsigned long dev) netif_wake_queue(_dev); } else { dp->st_rxq_rsch++; - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); goto resched; } - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); } else { resched: dp->tasklet_pending = 1; diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c index d8b89c74aabd..37ab8c855719 100644 --- a/drivers/net/irda/act200l-sir.c +++ b/drivers/net/irda/act200l-sir.c @@ -107,7 +107,7 @@ static int act200l_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Power on the dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -124,7 +124,7 @@ static int act200l_open(struct sir_dev *dev) static int act200l_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Power off the dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -143,7 +143,7 @@ static int act200l_change_speed(struct sir_dev *dev, unsigned speed) u8 control[3]; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Clear DTR and set RTS to enter command mode */ sirdev_set_dtr_rts(dev, FALSE, TRUE); @@ -212,7 +212,7 @@ static int act200l_reset(struct sir_dev *dev) }; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -240,7 +240,7 @@ static int act200l_reset(struct sir_dev *dev) dev->speed = 9600; break; default: - IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), unknown state %d\n", __func__, state); ret = -1; break; } diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c index 736d2473b7e1..50b2141a6103 100644 --- a/drivers/net/irda/actisys-sir.c +++ b/drivers/net/irda/actisys-sir.c @@ -165,7 +165,7 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed) int ret = 0; int i = 0; - IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, + IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__, speed, dev->speed); /* dongle was already resetted from irda_request state machine, diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 083b0dd70fef..2ff181861d2d 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -152,7 +152,7 @@ static int __init ali_ircc_init(void) int reg, revision; int i = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); ret = platform_driver_register(&ali_ircc_driver); if (ret) { @@ -166,7 +166,7 @@ static int __init ali_ircc_init(void) /* Probe for all the ALi chipsets we know about */ for (chip= chips; chip->name; chip++, i++) { - IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name); + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name); /* Try all config registers for this chip */ for (cfg=0; cfg<2; cfg++) @@ -196,11 +196,11 @@ static int __init ali_ircc_init(void) if (reg == chip->cid_value) { - IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base); + IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base); outb(0x1F, cfg_base); revision = inb(cfg_base+1); - IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__, chip->name, revision); /* @@ -223,14 +223,14 @@ static int __init ali_ircc_init(void) } else { - IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base); + IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base); } /* Exit configuration */ outb(0xbb, cfg_base); } } - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); if (ret) platform_driver_unregister(&ali_ircc_driver); @@ -248,7 +248,7 @@ static void __exit ali_ircc_cleanup(void) { int i; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -257,7 +257,7 @@ static void __exit ali_ircc_cleanup(void) platform_driver_unregister(&ali_ircc_driver); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); } /* @@ -273,11 +273,11 @@ static int ali_ircc_open(int i, chipio_t *info) int dongle_id; int err; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); if (i >= ARRAY_SIZE(dev_self)) { IRDA_ERROR("%s(), maximum number of supported chips reached!\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -288,7 +288,7 @@ static int ali_ircc_open(int i, chipio_t *info) dev = alloc_irdadev(sizeof(*self)); if (dev == NULL) { IRDA_ERROR("%s(), can't allocate memory for control block!\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -312,7 +312,7 @@ static int ali_ircc_open(int i, chipio_t *info) /* Reserve the ioports that we need */ if (!request_region(self->io.fir_base, self->io.fir_ext, ALI_IRCC_DRIVER_NAME)) { - IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__, + IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__, self->io.fir_base); err = -ENODEV; goto err_out1; @@ -370,19 +370,19 @@ static int ali_ircc_open(int i, chipio_t *info) err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto err_out4; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); /* Check dongle id */ dongle_id = ali_ircc_read_dongle_id(i, info); - IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__, + IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__, ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]); self->io.dongle_id = dongle_id; - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; @@ -411,7 +411,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) { int iobase; - IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -421,7 +421,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) unregister_netdev(self->netdev); /* Release the PORT that this driver is using */ - IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base); + IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -435,7 +435,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) dev_self[self->index] = NULL; free_netdev(self->netdev); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } @@ -478,7 +478,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) int cfg_base = info->cfg_base; int hi, low, reg; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chip->entr1, cfg_base); @@ -497,13 +497,13 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) info->sir_base = info->fir_base; - IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base); + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); /* Read IRQ control register */ outb(0x70, cfg_base); reg = inb(cfg_base+1); info->irq = reg & 0x0f; - IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq); /* Read DMA channel */ outb(0x74, cfg_base); @@ -511,26 +511,26 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) info->dma = reg & 0x07; if(info->dma == 0x04) - IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__); + IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__); else - IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma); /* Read Enabled Status */ outb(0x30, cfg_base); reg = inb(cfg_base+1); info->enabled = (reg & 0x80) && (reg & 0x01); - IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled); + IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled); /* Read Power Status */ outb(0x22, cfg_base); reg = inb(cfg_base+1); info->suspended = (reg & 0x20); - IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended); + IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended); /* Exit configuration */ outb(0xbb, cfg_base); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } @@ -548,7 +548,7 @@ static int ali_ircc_setup(chipio_t *info) int version; int iobase = info->fir_base; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Locking comments : * Most operations here need to be protected. We are called before @@ -609,7 +609,7 @@ static int ali_ircc_setup(chipio_t *info) // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM // Turn on the interrupts in ali_ircc_net_open - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return 0; } @@ -626,7 +626,7 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info) int dongle_id, reg; int cfg_base = info->cfg_base; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chips[i].entr1, cfg_base); @@ -640,13 +640,13 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info) outb(0xf0, cfg_base); reg = inb(cfg_base+1); dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01); - IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__, dongle_id, dongle_types[dongle_id]); /* Exit configuration */ outb(0xbb, cfg_base); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return dongle_id; } @@ -663,7 +663,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) struct ali_ircc_cb *self; int ret; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); self = dev->priv; @@ -677,7 +677,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) spin_unlock(&self->lock); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return ret; } /* @@ -691,7 +691,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) __u8 eir, OldMessageCount; int iobase, tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.fir_base; @@ -704,10 +704,10 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ - IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID); - IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus); - IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier); - IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir); + IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID); + IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus); + IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier); + IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir); /* Disable interrupts */ SetCOMInterrupts(self, FALSE); @@ -718,7 +718,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) { if (self->io.direction == IO_XMIT) /* TX */ { - IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__); if(ali_ircc_dma_xmit_complete(self)) { @@ -737,23 +737,23 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) } else /* RX */ { - IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__); if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; - IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__); } if (ali_ircc_dma_receive_complete(self)) { - IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__); self->ier = IER_EOM; } else { - IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__); self->ier = IER_EOM | IER_TIMER; } @@ -766,7 +766,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; - IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__); } /* Disable Timer */ switch_bank(iobase, BANK1); @@ -798,7 +798,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) /* Restore Interrupt */ SetCOMInterrupts(self, TRUE); - IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__); return IRQ_RETVAL(eir); } @@ -813,7 +813,7 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) int iobase; int iir, lsr; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.sir_base; @@ -822,13 +822,13 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) /* Clear interrupt */ lsr = inb(iobase+UART_LSR); - IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, + IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: - IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), RLSI\n", __func__); break; case UART_IIR_RDI: /* Receive interrupt */ @@ -842,14 +842,14 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) } break; default: - IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir); + IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir); break; } } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return IRQ_RETVAL(iir); } @@ -866,7 +866,7 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self) int boguscount = 0; int iobase; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; @@ -881,12 +881,12 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self) /* Make sure we don't stay here too long */ if (boguscount++ > 32) { - IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__); + IRDA_DEBUG(2,"%s(), breaking!\n", __func__); break; } } while (inb(iobase+UART_LSR) & UART_LSR_DR); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -903,7 +903,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) IRDA_ASSERT(self != NULL, return;); - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.sir_base; @@ -922,16 +922,16 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) { /* We must wait until all data are gone */ while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT)) - IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ ); - IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed); + IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed); ali_ircc_change_speed(self, self->new_speed); self->new_speed = 0; // benjamin 2000/11/10 06:32PM if (self->io.speed > 115200) { - IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ ); self->ier = IER_EOM; // SetCOMInterrupts(self, TRUE); @@ -949,7 +949,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) outb(UART_IER_RDI, iobase+UART_IER); } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) @@ -957,9 +957,9 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) struct net_device *dev = self->netdev; int iobase; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud); + IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud); /* This function *must* be called with irq off and spin-lock. * - Jean II */ @@ -998,7 +998,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) netif_wake_queue(self->netdev); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) @@ -1008,14 +1008,14 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv; struct net_device *dev; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; iobase = self->io.fir_base; - IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud); + IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud); /* Come from SIR speed */ if(self->io.speed <=115200) @@ -1029,7 +1029,7 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) // Set Dongle Speed mode ali_ircc_change_dongle_speed(self, baud); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -1047,9 +1047,9 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) int lcr; /* Line control reg */ int divisor; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed); + IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed); IRDA_ASSERT(self != NULL, return;); @@ -1103,7 +1103,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) spin_unlock_irqrestore(&self->lock, flags); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) @@ -1113,14 +1113,14 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) int iobase,dongle_id; int tmp = 0; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */ dongle_id = self->io.dongle_id; /* We are already locked, no need to do it again */ - IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed); + IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed); switch_bank(iobase, BANK2); tmp = inb(iobase+FIR_IRDA_CR); @@ -1284,7 +1284,7 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -1297,11 +1297,11 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) { int actual = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); /* Tx FIFO should be empty! */ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { - IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ ); return 0; } @@ -1313,7 +1313,7 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) actual++; } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return actual; } @@ -1329,7 +1329,7 @@ static int ali_ircc_net_open(struct net_device *dev) int iobase; char hwname[32]; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1375,7 +1375,7 @@ static int ali_ircc_net_open(struct net_device *dev) */ self->irlap = irlap_open(dev, &self->qos, hwname); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1392,7 +1392,7 @@ static int ali_ircc_net_close(struct net_device *dev) struct ali_ircc_cb *self; //int iobase; - IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1415,7 +1415,7 @@ static int ali_ircc_net_close(struct net_device *dev) free_irq(self->io.irq, dev); free_dma(self->io.dma); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1434,7 +1434,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) __u32 speed; int mtt, diff; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); self = (struct ali_ircc_cb *) dev->priv; iobase = self->io.fir_base; @@ -1488,7 +1488,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) diff = self->now.tv_usec - self->stamp.tv_usec; /* self->stamp is set from ali_ircc_dma_receive_complete() */ - IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff); + IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff); if (diff < 0) diff += 1000000; @@ -1510,7 +1510,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) /* Adjust for timer resolution */ mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */ - IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt); + IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt); /* Setup timer */ if (mtt == 1) /* 500 us */ @@ -1567,7 +1567,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1578,7 +1578,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) unsigned char FIFO_OPTI, Hi, Lo; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1629,7 +1629,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) tmp = inb(iobase+FIR_LCR_B); tmp &= ~0x20; // Disable SIP outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B); - IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B)); outb(0, iobase+FIR_LSR); @@ -1639,7 +1639,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) @@ -1647,7 +1647,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) int iobase; int ret = TRUE; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1660,7 +1660,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT) { - IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__); + IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__); self->stats.tx_errors++; self->stats.tx_fifo_errors++; } @@ -1703,7 +1703,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } @@ -1718,7 +1718,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) { int iobase, tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1756,7 +1756,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) //switch_bank(iobase, BANK0); tmp = inb(iobase+FIR_LCR_B); outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM - IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B)); /* Set Rx Threshold */ switch_bank(iobase, BANK1); @@ -1768,7 +1768,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1779,7 +1779,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) __u8 status, MessageCount; int len, i, iobase, val; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); st_fifo = &self->st_fifo; iobase = self->io.fir_base; @@ -1788,7 +1788,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) MessageCount = inb(iobase+ FIR_LSR)&0x07; if (MessageCount > 0) - IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount); + IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount); for (i=0; i<=MessageCount; i++) { @@ -1801,11 +1801,11 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) len = len << 8; len |= inb(iobase+FIR_RX_DSR_LO); - IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len); - IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status); + IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len); + IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status); if (st_fifo->tail >= MAX_RX_WINDOW) { - IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), window is full!\n", __func__ ); continue; } @@ -1828,7 +1828,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) /* Check for errors */ if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) { - IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ ); /* Skip frame */ self->stats.rx_errors++; @@ -1838,29 +1838,29 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) if (status & LSR_FIFO_UR) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ ); } if (status & LSR_FRAME_ERROR) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ ); } if (status & LSR_CRC_ERROR) { self->stats.rx_crc_errors++; - IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ ); } if(self->rcvFramesOverflow) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ ); } if(len == 0) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ ); } } else @@ -1872,7 +1872,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) val = inb(iobase+FIR_BSR); if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) { - IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ ); /* Put this entry back in fifo */ st_fifo->head--; @@ -1909,7 +1909,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) { IRDA_WARNING("%s(), memory squeeze, " "dropping frame.\n", - __FUNCTION__); + __func__); self->stats.rx_dropped++; return FALSE; @@ -1937,7 +1937,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return TRUE; } @@ -1956,7 +1956,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) int iobase; __u32 speed; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return 0;); @@ -2005,7 +2005,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb(skb); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -2024,7 +2024,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) unsigned long flags; int ret = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -2032,11 +2032,11 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ - IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ ); /* * This function will also be used by IrLAP to change the * speed, so we still must allow for speed change within @@ -2050,13 +2050,13 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) spin_unlock_irqrestore(&self->lock, flags); break; case SIOCSMEDIABUSY: /* Set media busy */ - IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ ); if (!capable(CAP_NET_ADMIN)) return -EPERM; irda_device_set_media_busy(self->netdev, TRUE); break; case SIOCGRECEIVING: /* Check if we are receiving right now */ - IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ ); /* This is protected */ irq->ifr_receiving = ali_ircc_is_receiving(self); break; @@ -2064,7 +2064,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ret = -EOPNOTSUPP; } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } @@ -2081,7 +2081,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) int status = FALSE; int iobase; - IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return FALSE;); @@ -2095,7 +2095,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) { /* We are receiving something */ - IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ ); status = TRUE; } switch_bank(iobase, BANK0); @@ -2107,7 +2107,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) spin_unlock_irqrestore(&self->lock, flags); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return status; } @@ -2116,9 +2116,9 @@ static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev) { struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return &self->stats; } @@ -2164,7 +2164,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) int iobase = self->io.fir_base; /* or sir_base */ - IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable); + IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable); /* Enable the interrupt which we wish to */ if (enable){ @@ -2205,14 +2205,14 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) else outb(newMask, iobase+UART_IER); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void SIR2FIR(int iobase) { //unsigned char tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ @@ -2228,14 +2228,14 @@ static void SIR2FIR(int iobase) //tmp |= 0x20; //outb(tmp, iobase+FIR_LCR_B); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void FIR2SIR(int iobase) { unsigned char val; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ @@ -2251,7 +2251,7 @@ static void FIR2SIR(int iobase) val = inb(iobase+UART_LSR); val = inb(iobase+UART_MSR); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>"); diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 34ad189fff67..69d16b30323b 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -245,7 +245,7 @@ toshoboe_dumpregs (struct toshoboe_cb *self) { __u32 ringbase; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); ringbase = INB (OBOE_RING_BASE0) << 10; ringbase |= INB (OBOE_RING_BASE1) << 18; @@ -293,7 +293,7 @@ static void toshoboe_disablebm (struct toshoboe_cb *self) { __u8 command; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); pci_read_config_byte (self->pdev, PCI_COMMAND, &command); command &= ~PCI_COMMAND_MASTER; @@ -305,7 +305,7 @@ toshoboe_disablebm (struct toshoboe_cb *self) static void toshoboe_stopchip (struct toshoboe_cb *self) { - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); /*Disable interrupts */ OUTB (0x0, OBOE_IER); @@ -350,7 +350,7 @@ toshoboe_setbaud (struct toshoboe_cb *self) __u16 pconfig = 0; __u8 config0l = 0; - IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed); + IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed); switch (self->speed) { @@ -482,7 +482,7 @@ toshoboe_setbaud (struct toshoboe_cb *self) static void toshoboe_enablebm (struct toshoboe_cb *self) { - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); pci_set_master (self->pdev); } @@ -492,7 +492,7 @@ toshoboe_initring (struct toshoboe_cb *self) { int i; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); for (i = 0; i < TX_SLOTS; ++i) { @@ -550,7 +550,7 @@ toshoboe_startchip (struct toshoboe_cb *self) { __u32 physaddr; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); toshoboe_initring (self); toshoboe_enablebm (self); @@ -824,7 +824,7 @@ toshoboe_probe (struct toshoboe_cb *self) #endif unsigned long flags; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (request_irq (self->io.irq, toshoboe_probeinterrupt, self->io.irqflags, "toshoboe", (void *) self)) @@ -983,10 +983,10 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) IRDA_ASSERT (self != NULL, return 0; ); - IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__ ,skb->len,self->txpending,INB (OBOE_ENABLEH)); if (!cb->magic) { - IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic); + IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic); #ifdef DUMP_PACKETS _dumpbufs(skb->data,skb->len,'>'); #endif @@ -1015,7 +1015,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) { self->new_speed = speed; IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" , - __FUNCTION__, speed); + __func__, speed); /* if no data, that's all! */ if (!skb->len) { @@ -1057,7 +1057,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) /* which we will add a wrong checksum to */ mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt); - IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__ ,skb->len,mtt,self->txpending); if (mtt) { @@ -1101,7 +1101,7 @@ dumpbufs(skb->data,skb->len,'>'); if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS) { - IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__ ,skb->len, self->ring->tx[self->txs].control, self->txpending); toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX); spin_unlock_irqrestore(&self->spinlock, flags); @@ -1179,7 +1179,7 @@ toshoboe_interrupt (int irq, void *dev_id) if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS) self->txpending++; } - IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__ ,irqstat,txp,self->txpending); txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK; @@ -1209,7 +1209,7 @@ toshoboe_interrupt (int irq, void *dev_id) { self->speed = self->new_speed; IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n", - __FUNCTION__, self->speed); + __func__, self->speed); toshoboe_setbaud (self); } @@ -1224,7 +1224,7 @@ toshoboe_interrupt (int irq, void *dev_id) { int len = self->ring->rx[self->rxs].len; skb = NULL; - IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__ + IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__ ,len,self->ring->rx[self->rxs].control); #ifdef DUMP_PACKETS @@ -1246,7 +1246,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 2; else len = 0; - IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable); } #ifdef USE_MIR @@ -1256,7 +1256,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 2; else len = 0; - IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable); } #endif else if (enable & OBOE_ENABLEH_FIRON) @@ -1265,10 +1265,10 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 4; /*FIXME: check this */ else len = 0; - IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable); } else - IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable); if (len) { @@ -1289,7 +1289,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); { printk (KERN_INFO "%s(), memory squeeze, dropping frame.\n", - __FUNCTION__); + __func__); } } } @@ -1301,7 +1301,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); /* (SIR) data is splitted in several slots. */ /* we have to join all the received buffers received */ /*in a large buffer before checking CRC. */ - IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__ + IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__ ,len,self->ring->rx[self->rxs].control); } @@ -1329,7 +1329,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); if (irqstat & OBOE_INT_SIP) { self->int_sip++; - IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__ ,self->int_sip,irqstat,self->txpending); } return IRQ_HANDLED; @@ -1343,7 +1343,7 @@ toshoboe_net_open (struct net_device *dev) unsigned long flags; int rc; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); self = netdev_priv(dev); @@ -1381,7 +1381,7 @@ toshoboe_net_close (struct net_device *dev) { struct toshoboe_cb *self; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); IRDA_ASSERT (dev != NULL, return -1; ); self = (struct toshoboe_cb *) dev->priv; @@ -1426,7 +1426,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT (self != NULL, return -1; ); - IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); /* Disable interrupts & save flags */ spin_lock_irqsave(&self->spinlock, flags); @@ -1438,7 +1438,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) * speed, so we still must allow for speed change within * interrupt context. */ - IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__ + IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__ ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate ); if (!in_interrupt () && !capable (CAP_NET_ADMIN)) { ret = -EPERM; @@ -1451,7 +1451,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) self->new_speed = irq->ifr_baudrate; break; case SIOCSMEDIABUSY: /* Set media busy */ - IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__ + IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__ ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) ); if (!capable (CAP_NET_ADMIN)) { ret = -EPERM; @@ -1461,11 +1461,11 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) break; case SIOCGRECEIVING: /* Check if we are receiving right now */ irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0; - IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__ + IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__ ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving ); break; default: - IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); ret = -EOPNOTSUPP; } out: @@ -1492,7 +1492,7 @@ toshoboe_close (struct pci_dev *pci_dev) int i; struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev); - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); IRDA_ASSERT (self != NULL, return; ); @@ -1533,7 +1533,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) int ok = 0; int err; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if ((err=pci_enable_device(pci_dev))) return err; @@ -1700,7 +1700,7 @@ toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap) unsigned long flags; int i = 10; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (!self || self->stopped) return 0; @@ -1728,7 +1728,7 @@ toshoboe_wakeup (struct pci_dev *pci_dev) struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev); unsigned long flags; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (!self || !self->stopped) return 0; diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c index 738531b16bd3..a31b8fa8aaa9 100644 --- a/drivers/net/irda/girbil-sir.c +++ b/drivers/net/irda/girbil-sir.c @@ -86,7 +86,7 @@ static int girbil_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power on dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -102,7 +102,7 @@ static int girbil_open(struct sir_dev *dev) static int girbil_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -126,7 +126,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed) u8 control[2]; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* dongle alread reset - port and dongle at default speed */ @@ -179,7 +179,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -209,7 +209,7 @@ static int girbil_reset(struct sir_dev *dev) u8 control = GIRBIL_TXEN | GIRBIL_RXEN; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -241,7 +241,7 @@ static int girbil_reset(struct sir_dev *dev) break; default: - IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefined state %d\n", __func__, state); ret = -1; break; } diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 18b471cd1447..b5d6b9ac162a 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -177,12 +177,12 @@ static void irda_usb_build_header(struct irda_usb_cb *self, (!force) && (self->speed != -1)) { /* No speed and xbofs change here * (we'll do it later in the write callback) */ - IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__); *header = 0; return; } - IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed); + IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed); self->speed = self->new_speed; /* We will do ` self->new_speed = -1; ' in the completion * handler just in case the current URB fail - Jean II */ @@ -228,7 +228,7 @@ static void irda_usb_build_header(struct irda_usb_cb *self, /* Set the negotiated additional XBOFS */ if (self->new_xbofs != -1) { - IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs); + IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs); self->xbofs = self->new_xbofs; /* We will do ` self->new_xbofs = -1; ' in the completion * handler just in case the current URB fail - Jean II */ @@ -302,13 +302,13 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self) struct urb *urb; int ret; - IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__, self->new_speed, self->new_xbofs); /* Grab the speed URB */ urb = self->speed_urb; if (urb->status != 0) { - IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__); + IRDA_WARNING("%s(), URB still in use!\n", __func__); return; } @@ -334,7 +334,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self) /* Irq disabled -> GFP_ATOMIC */ if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) { - IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__); + IRDA_WARNING("%s(), failed Speed URB\n", __func__); } } @@ -347,7 +347,7 @@ static void speed_bulk_callback(struct urb *urb) { struct irda_usb_cb *self = urb->context; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* We should always have a context */ IRDA_ASSERT(self != NULL, return;); @@ -357,7 +357,7 @@ static void speed_bulk_callback(struct urb *urb) /* Check for timeout and other USB nasties */ if (urb->status != 0) { /* I get a lot of -ECONNABORTED = -103 here - Jean II */ - IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags); /* Don't do anything here, that might confuse the USB layer. * Instead, we will wait for irda_usb_net_timeout(), the @@ -392,7 +392,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) int res, mtt; int err = 1; /* Failed */ - IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name); + IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name); netif_stop_queue(netdev); @@ -403,7 +403,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) * We need to check self->present under the spinlock because * of irda_usb_disconnect() is synchronous - Jean II */ if (!self->present) { - IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__); goto drop; } @@ -437,7 +437,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) } if (urb->status != 0) { - IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__); + IRDA_WARNING("%s(), URB still in use!\n", __func__); goto drop; } @@ -524,7 +524,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) /* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */ if ((res = usb_submit_urb(urb, GFP_ATOMIC))) { - IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__); + IRDA_WARNING("%s(), failed Tx URB\n", __func__); self->stats.tx_errors++; /* Let USB recover : We will catch that in the watchdog */ /*netif_start_queue(netdev);*/ @@ -556,7 +556,7 @@ static void write_bulk_callback(struct urb *urb) struct sk_buff *skb = urb->context; struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* We should always have a context */ IRDA_ASSERT(self != NULL, return;); @@ -570,7 +570,7 @@ static void write_bulk_callback(struct urb *urb) /* Check for timeout and other USB nasties */ if (urb->status != 0) { /* I get a lot of -ECONNABORTED = -103 here - Jean II */ - IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags); /* Don't do anything here, that might confuse the USB layer, * and we could go in recursion and blow the kernel stack... @@ -589,7 +589,7 @@ static void write_bulk_callback(struct urb *urb) /* If the network is closed, stop everything */ if ((!self->netopen) || (!self->present)) { - IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__); spin_unlock_irqrestore(&self->lock, flags); return; } @@ -600,7 +600,7 @@ static void write_bulk_callback(struct urb *urb) (self->new_xbofs != self->xbofs)) { /* We haven't changed speed yet (because of * IUC_SPEED_BUG), so do it now - Jean II */ - IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__); irda_usb_change_speed_xbofs(self); } else { /* New speed and xbof is now commited in hardware */ @@ -632,7 +632,7 @@ static void irda_usb_net_timeout(struct net_device *netdev) struct urb *urb; int done = 0; /* If we have made any progress */ - IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__); IRDA_ASSERT(self != NULL, return;); /* Protect us from USB callbacks, net Tx and else. */ @@ -640,7 +640,7 @@ static void irda_usb_net_timeout(struct net_device *netdev) /* self->present *MUST* be read under spinlock */ if (!self->present) { - IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); + IRDA_WARNING("%s(), device not present!\n", __func__); netif_stop_queue(netdev); spin_unlock_irqrestore(&self->lock, flags); return; @@ -763,7 +763,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc struct irda_skb_cb *cb; int ret; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* This should never happen */ IRDA_ASSERT(skb != NULL, return;); @@ -786,7 +786,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc /* If this ever happen, we are in deep s***. * Basically, the Rx path will stop... */ IRDA_WARNING("%s(), Failed to submit Rx URB %d\n", - __FUNCTION__, ret); + __func__, ret); } } @@ -807,7 +807,7 @@ static void irda_usb_receive(struct urb *urb) struct urb *next_urb; unsigned int len, docopy; - IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length); + IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length); /* Find ourselves */ cb = (struct irda_skb_cb *) skb->cb; @@ -817,7 +817,7 @@ static void irda_usb_receive(struct urb *urb) /* If the network is closed or the device gone, stop everything */ if ((!self->netopen) || (!self->present)) { - IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__); /* Don't re-submit the URB : will stall the Rx path */ return; } @@ -840,7 +840,7 @@ static void irda_usb_receive(struct urb *urb) /* Usually precursor to a hot-unplug on OHCI. */ default: self->stats.rx_errors++; - IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags); break; } /* If we received an error, we don't want to resubmit the @@ -861,7 +861,7 @@ static void irda_usb_receive(struct urb *urb) /* Check for empty frames */ if (urb->actual_length <= self->header_length) { - IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__); + IRDA_WARNING("%s(), empty frame!\n", __func__); goto done; } @@ -967,7 +967,7 @@ static void irda_usb_rx_defer_expired(unsigned long data) struct irda_skb_cb *cb; struct urb *next_urb; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Find ourselves */ cb = (struct irda_skb_cb *) skb->cb; @@ -1053,7 +1053,7 @@ static int stir421x_fw_upload(struct irda_usb_cb *self, patch_block, block_size, &actual_len, msecs_to_jiffies(500)); IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n", - __FUNCTION__, actual_len, ret); + __func__, actual_len, ret); if (ret < 0) break; @@ -1092,7 +1092,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) /* We get a patch from userspace */ IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n", - __FUNCTION__, stir421x_fw_name, fw->size); + __func__, stir421x_fw_name, fw->size); ret = -EINVAL; @@ -1116,7 +1116,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) + (build % 10); IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n", - __FUNCTION__, fw_version); + __func__, fw_version); } } @@ -1172,7 +1172,7 @@ static int irda_usb_net_open(struct net_device *netdev) char hwname[16]; int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); IRDA_ASSERT(netdev != NULL, return -1;); self = (struct irda_usb_cb *) netdev->priv; @@ -1182,13 +1182,13 @@ static int irda_usb_net_open(struct net_device *netdev) /* Can only open the device if it's there */ if(!self->present) { spin_unlock_irqrestore(&self->lock, flags); - IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); + IRDA_WARNING("%s(), device not present!\n", __func__); return -1; } if(self->needspatch) { spin_unlock_irqrestore(&self->lock, flags); - IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ; + IRDA_WARNING("%s(), device needs patch\n", __func__) ; return -EIO ; } @@ -1231,7 +1231,7 @@ static int irda_usb_net_open(struct net_device *netdev) /* If this ever happen, we are in deep s***. * Basically, we can't start the Rx path... */ IRDA_WARNING("%s(), Failed to allocate Rx skb\n", - __FUNCTION__); + __func__); return -1; } //skb_reserve(newskb, USB_IRDA_HEADER - 1); @@ -1254,7 +1254,7 @@ static int irda_usb_net_close(struct net_device *netdev) struct irda_usb_cb *self; int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); IRDA_ASSERT(netdev != NULL, return -1;); self = (struct irda_usb_cb *) netdev->priv; @@ -1309,7 +1309,7 @@ static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) self = dev->priv; IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -1367,7 +1367,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self) { struct irda_class_desc *desc; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); desc = self->irda_desc; @@ -1384,7 +1384,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self) self->qos.data_size.bits = desc->bmDataSize; IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", - __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits); + __func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits); /* Don't always trust what the dongle tell us */ if(self->capability & IUC_SIR_ONLY) @@ -1419,7 +1419,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self) { struct net_device *netdev = self->netdev; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); irda_usb_init_qos(self); @@ -1442,7 +1442,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self) */ static inline void irda_usb_close(struct irda_usb_cb *self) { - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); /* Remove netdevice */ unregister_netdev(self->netdev); @@ -1515,13 +1515,13 @@ static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_ /* This is our interrupt endpoint */ self->bulk_int_ep = ep; } else { - IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep); + IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep); } } } IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n", - __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep); + __func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep); return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0)); } @@ -1583,7 +1583,7 @@ static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interf 0, intf->altsetting->desc.bInterfaceNumber, desc, sizeof(*desc), 500); - IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret); + IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret); if (ret < sizeof(*desc)) { IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n", (ret<0) ? "failed" : "too short", ret); @@ -1696,10 +1696,10 @@ static int irda_usb_probe(struct usb_interface *intf, /* Martin Diehl says if we get a -EPIPE we should * be fine and we don't need to do a usb_clear_halt(). * - Jean II */ - IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__); break; default: - IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret); + IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret); ret = -EIO; goto err_out_3; } @@ -1708,7 +1708,7 @@ static int irda_usb_probe(struct usb_interface *intf, interface = intf->cur_altsetting; if(!irda_usb_parse_endpoints(self, interface->endpoint, interface->desc.bNumEndpoints)) { - IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__); + IRDA_ERROR("%s(), Bogus endpoints...\n", __func__); ret = -EIO; goto err_out_3; } @@ -1815,7 +1815,7 @@ static void irda_usb_disconnect(struct usb_interface *intf) struct irda_usb_cb *self = usb_get_intfdata(intf); int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); usb_set_intfdata(intf, NULL); if (!self) @@ -1865,7 +1865,7 @@ static void irda_usb_disconnect(struct usb_interface *intf) /* Free self and network device */ free_netdev(self->netdev); - IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__); } /*------------------------------------------------------------------*/ diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 9e33196f9459..6bcee01c684c 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -231,7 +231,7 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp, dev = priv->dev; if (!dev) { - IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__); + IRDA_WARNING("%s(), not ready yet!\n", __func__); return; } @@ -388,7 +388,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c IRDA_ASSERT(priv != NULL, return -ENODEV;); IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;); - IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd); + IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd); dev = priv->dev; IRDA_ASSERT(dev != NULL, return -1;); @@ -476,7 +476,7 @@ static int irtty_open(struct tty_struct *tty) mutex_unlock(&irtty_mutex); - IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name); + IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name); return 0; @@ -528,7 +528,7 @@ static void irtty_close(struct tty_struct *tty) kfree(priv); - IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name); + IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name); } /* ------------------------------------------------------- */ @@ -566,7 +566,7 @@ static void __exit irtty_sir_cleanup(void) if ((err = tty_unregister_ldisc(N_IRDA))) { IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n", - __FUNCTION__, err); + __func__, err); } } diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c index 648e54b3f00e..73fe83be34fe 100644 --- a/drivers/net/irda/kingsun-sir.c +++ b/drivers/net/irda/kingsun-sir.c @@ -243,7 +243,7 @@ static void kingsun_rcv_irq(struct urb *urb) } } else if (urb->actual_length > 0) { err("%s(): Unexpected response length, expected %d got %d", - __FUNCTION__, kingsun->max_rx, urb->actual_length); + __func__, kingsun->max_rx, urb->actual_length); } /* This urb has already been filled in kingsun_net_open */ ret = usb_submit_urb(urb, GFP_ATOMIC); diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c index 73261c54bbfd..d6d9d2e5ad49 100644 --- a/drivers/net/irda/litelink-sir.c +++ b/drivers/net/irda/litelink-sir.c @@ -78,7 +78,7 @@ static int litelink_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power up dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -95,7 +95,7 @@ static int litelink_open(struct sir_dev *dev) static int litelink_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -113,7 +113,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed) { int i; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* dongle already reset by irda-thread - current speed (dongle and * port) is the default speed (115200 for litelink!) @@ -156,7 +156,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed) */ static int litelink_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* probably the power-up can be dropped here, but with only * 15 usec delay it's not worth the risk unless somebody with diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c index 809906d94762..1ceed9cfb7c4 100644 --- a/drivers/net/irda/ma600-sir.c +++ b/drivers/net/irda/ma600-sir.c @@ -67,13 +67,13 @@ static struct dongle_driver ma600 = { static int __init ma600_sir_init(void) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); return irda_register_dongle(&ma600); } static void __exit ma600_sir_cleanup(void) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); irda_unregister_dongle(&ma600); } @@ -88,7 +88,7 @@ static int ma600_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -106,7 +106,7 @@ static int ma600_open(struct sir_dev *dev) static int ma600_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -176,7 +176,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) { u8 byte; - IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__, speed, dev->speed); /* dongle already reset, dongle and port at default speed (9600) */ @@ -201,12 +201,12 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) sirdev_raw_read(dev, &byte, sizeof(byte)); if (byte != get_control_byte(speed)) { IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n", - __FUNCTION__, (unsigned) byte, + __func__, (unsigned) byte, (unsigned) get_control_byte(speed)); return -1; } else - IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__); + IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__); #endif /* Set DTR, Set RTS */ @@ -238,7 +238,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) int ma600_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Reset the dongle : set DTR low for 10 ms */ sirdev_set_dtr_rts(dev, FALSE, TRUE); diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c index 67bd016e4df8..5e2f4859cee7 100644 --- a/drivers/net/irda/mcp2120-sir.c +++ b/drivers/net/irda/mcp2120-sir.c @@ -63,7 +63,7 @@ static int mcp2120_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* seems no explicit power-on required here and reset switching it on anyway */ @@ -76,7 +76,7 @@ static int mcp2120_open(struct sir_dev *dev) static int mcp2120_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ /* reset and inhibit mcp2120 */ @@ -102,7 +102,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed) u8 control[2]; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -155,7 +155,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefine state %d\n", __func__, state); ret = -EINVAL; break; } @@ -187,7 +187,7 @@ static int mcp2120_reset(struct sir_dev *dev) unsigned delay = 0; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -213,7 +213,7 @@ static int mcp2120_reset(struct sir_dev *dev) break; default: - IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefined state %d\n", __func__, state); ret = -EINVAL; break; } diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index effc1ce8179a..8583d951a6ad 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -151,8 +151,8 @@ static char *dongle_types[] = { static chipio_t pnp_info; static const struct pnp_device_id nsc_ircc_pnp_table[] = { { .id = "NSC6001", .driver_data = 0 }, - { .id = "IBM0071", .driver_data = 0 }, { .id = "HWPC224", .driver_data = 0 }, + { .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 }, { } }; @@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void) /* Probe for all the NSC chipsets we know about */ for (chip = chips; chip->name ; chip++) { - IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name); /* Try all config registers for this chip */ @@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void) /* Read index register */ reg = inb(cfg_base); if (reg == 0xff) { - IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base); + IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base); continue; } @@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void) id = inb(cfg_base+1); if ((id & chip->cid_mask) == chip->cid_value) { IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n", - __FUNCTION__, chip->name, id & ~chip->cid_mask); + __func__, chip->name, id & ~chip->cid_mask); /* * If we found a correct PnP setting, @@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void) } i++; } else { - IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id); + IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id); } } } @@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info) void *ret; int err, chip_index; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) { @@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info) } if (chip_index == ARRAY_SIZE(dev_self)) { - IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__); + IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__); return -ENOMEM; } @@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info) dev = alloc_irdadev(sizeof(struct nsc_ircc_cb)); if (dev == NULL) { IRDA_ERROR("%s(), can't allocate memory for " - "control block!\n", __FUNCTION__); + "control block!\n", __func__); return -ENOMEM; } @@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info) ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name); if (!ret) { IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); err = -ENODEV; goto out1; } @@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info) err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto out4; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); @@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self) { int iobase; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 0x2e8: outb(0x15, cfg_base+1); break; case 0x3f8: outb(0x16, cfg_base+1); break; case 0x2f8: outb(0x17, cfg_base+1); break; - default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid base_address", __func__); } /* Control Signal Routing Register (CSRT) */ @@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 9: temp = 0x05; break; case 11: temp = 0x06; break; case 15: temp = 0x07; break; - default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid irq", __func__); } outb(CFG_108_CSRT, cfg_base); @@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 0: outb(0x08+temp, cfg_base+1); break; case 1: outb(0x10+temp, cfg_base+1); break; case 3: outb(0x18+temp, cfg_base+1); break; - default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid dma", __func__); } outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */ @@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) break; } info->sir_base = info->fir_base; - IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); /* Read control signals routing register (CSRT) */ @@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) info->irq = 15; break; } - IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq); /* Currently we only read Rx DMA but it will also be used for Tx */ switch ((reg >> 3) & 0x03) { @@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) info->dma = 3; break; } - IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma); /* Read mode control register (MCTL) */ outb(CFG_108_MCTL, cfg_base); @@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) /* User is sure about his config... accept it. */ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " "io=0x%04x, irq=%d, dma=%d\n", - __FUNCTION__, info->fir_base, info->irq, info->dma); + __func__, info->fir_base, info->irq, info->dma); /* Access bank for SP2 */ outb(CFG_39X_LDN, cfg_base); @@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) int enabled, susp; IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); /* This function should be executed with irq off to avoid * another driver messing with the Super I/O bank - Jean II */ @@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) outb(CFG_39X_SPC, cfg_base); susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1); - IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp); + IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp); /* Configure SP2 */ @@ -930,7 +930,10 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i pnp_info.dma = -1; pnp_succeeded = 1; - /* There don't seem to be any way to get the cfg_base. + if (id->driver_data & NSC_FORCE_DONGLE_TYPE9) + dongle_id = 0x9; + + /* There doesn't seem to be any way of getting the cfg_base. * On my box, cfg_base is in the PnP descriptor of the * motherboard. Oh well... Jean II */ @@ -947,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i pnp_info.dma = pnp_dma(dev, 0); IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n", - __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma); + __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma); if((pnp_info.fir_base == 0) || (pnp_info.irq == -1) || (pnp_info.dma == -1)) { @@ -976,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info) version = inb(iobase+MID); IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n", - __FUNCTION__, driver_name, version); + __func__, driver_name, version); /* Should be 0x2? */ if (0x20 != (version & 0xf0)) { @@ -1080,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) case 0x00: /* same as */ case 0x01: /* Differential serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x02: /* same as */ case 0x03: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x04: /* Sharp RY5HD01 */ break; case 0x05: /* Reserved, but this is what the Thinkpad reports */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x06: /* Single-ended serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x07: /* Consumer-IR only */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */ outb(0x28, iobase+7); /* Set irsl[0-2] as output */ @@ -1111,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) case 0x0A: /* same as */ case 0x0B: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x0C: /* same as */ case 0x0D: /* HP HSDL-1100/HSDL-2100 */ @@ -1126,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) break; case 0x0F: /* No dongle connected */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); switch_bank(iobase, BANK0); outb(0x62, iobase+MCR); break; default: IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", - __FUNCTION__, dongle_id); + __func__, dongle_id); } /* IRCFG1: IRSL1 and 2 are set to IrDA mode */ @@ -1165,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) case 0x00: /* same as */ case 0x01: /* Differential serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x02: /* same as */ case 0x03: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x04: /* Sharp RY5HD01 */ break; case 0x05: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x06: /* Single-ended serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x07: /* Consumer-IR only */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); outb(0x00, iobase+4); if (speed > 115200) outb(0x01, iobase+4); @@ -1207,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) case 0x0A: /* same as */ case 0x0B: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x0C: /* same as */ case 0x0D: /* HP HSDL-1100/HSDL-2100 */ @@ -1216,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) break; case 0x0F: /* No dongle connected */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); switch_bank(iobase, BANK0); outb(0x62, iobase+MCR); break; default: - IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__); } /* Restore bank register */ outb(bank, iobase+BSR); @@ -1243,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) __u8 bank; __u8 ier; /* Interrupt enable register */ - IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed); + IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed); IRDA_ASSERT(self != NULL, return 0;); @@ -1276,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) outb(inb(iobase+4) | 0x04, iobase+4); mcr = MCR_MIR; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__); break; case 1152000: mcr = MCR_MIR; - IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__); break; case 4000000: mcr = MCR_FIR; - IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__); break; default: mcr = MCR_FIR; IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", - __FUNCTION__, speed); + __func__, speed); break; } @@ -1594,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) int actual = 0; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); /* Save current bank */ bank = inb(iobase+BSR); @@ -1602,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) switch_bank(iobase, BANK0); if (!(inb_p(iobase+LSR) & LSR_TXEMP)) { IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n", - __FUNCTION__); + __func__); /* FIFO may still be filled to the Tx interrupt threshold */ fifo_size -= 17; @@ -1615,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) } IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", - __FUNCTION__, fifo_size, actual, len); + __func__, fifo_size, actual, len); /* Restore bank */ outb(bank, iobase+BSR); @@ -1636,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self) __u8 bank; int ret = TRUE; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); iobase = self->io.fir_base; @@ -1767,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase) len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8); if (st_fifo->tail >= MAX_RX_WINDOW) { - IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), window is full!\n", __func__); continue; } @@ -1859,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase) if (skb == NULL) { IRDA_WARNING("%s(), memory squeeze, " "dropping frame.\n", - __FUNCTION__); + __func__); self->stats.rx_dropped++; /* Restore bank register */ @@ -1965,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir) * Need to be after self->io.direction to avoid race with * nsc_ircc_hard_xmit_sir() - Jean II */ if (self->new_speed) { - IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__); self->ier = nsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; @@ -2051,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase, } else IRDA_WARNING("%s(), potential " "Tx queue lockup !\n", - __FUNCTION__); + __func__); } } else { /* Not finished yet, so interrupt on DMA again */ @@ -2160,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev) char hwname[32]; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct nsc_ircc_cb *) dev->priv; @@ -2222,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev) int iobase; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); @@ -2276,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index 29398a4f73fd..71cd3c5a0762 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -35,6 +35,9 @@ #include <linux/types.h> #include <asm/io.h> +/* Features for chips (set in driver_data) */ +#define NSC_FORCE_DONGLE_TYPE9 0x00000001 + /* DMA modes needed */ #define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ #define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c index 8c22c7374a23..75714bc71030 100644 --- a/drivers/net/irda/old_belkin-sir.c +++ b/drivers/net/irda/old_belkin-sir.c @@ -92,7 +92,7 @@ static int old_belkin_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power on dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -110,7 +110,7 @@ static int old_belkin_open(struct sir_dev *dev) static int old_belkin_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -125,7 +125,7 @@ static int old_belkin_close(struct sir_dev *dev) */ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); dev->speed = 9600; return (speed==dev->speed) ? 0 : -EINVAL; @@ -139,7 +139,7 @@ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed) */ static int old_belkin_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* This dongles speed "defaults" to 9600 bps ;-) */ dev->speed = 9600; diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 6078e03de9a8..3f32909c24c8 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -80,7 +80,7 @@ static int sirdev_tx_complete_fsm(struct sir_dev *dev) return 0; default: - IRDA_ERROR("%s - undefined state\n", __FUNCTION__); + IRDA_ERROR("%s - undefined state\n", __func__); return -EINVAL; } fsm->substate = next_state; @@ -107,11 +107,11 @@ static void sirdev_config_fsm(struct work_struct *work) int ret = -1; unsigned delay; - IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies); + IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies); do { IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n", - __FUNCTION__, fsm->state, fsm->substate); + __func__, fsm->state, fsm->substate); next_state = fsm->state; delay = 0; @@ -249,12 +249,12 @@ static void sirdev_config_fsm(struct work_struct *work) break; default: - IRDA_ERROR("%s - undefined state\n", __FUNCTION__); + IRDA_ERROR("%s - undefined state\n", __func__); fsm->result = -EINVAL; /* fall thru */ case SIRDEV_STATE_ERROR: - IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result); + IRDA_ERROR("%s - error: %d\n", __func__, fsm->result); #if 0 /* don't enable this before we have netdev->tx_timeout to recover */ netif_stop_queue(dev->netdev); @@ -284,11 +284,12 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par { struct sir_fsm *fsm = &dev->fsm; - IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param); + IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__, + initial_state, param); if (down_trylock(&fsm->sem)) { if (in_interrupt() || in_atomic() || irqs_disabled()) { - IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__); return -EWOULDBLOCK; } else down(&fsm->sem); @@ -296,7 +297,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par if (fsm->state == SIRDEV_STATE_DEAD) { /* race with sirdev_close should never happen */ - IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__); + IRDA_ERROR("%s(), instance staled!\n", __func__); up(&fsm->sem); return -ESTALE; /* or better EPIPE? */ } @@ -341,7 +342,7 @@ int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type) { int err; - IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type); + IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type); err = sirdev_schedule_dongle_open(dev, type); if (unlikely(err)) @@ -376,7 +377,7 @@ int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len) ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len); if (ret > 0) { - IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__); dev->tx_buff.data += ret; dev->tx_buff.len -= ret; @@ -437,7 +438,7 @@ void sirdev_write_complete(struct sir_dev *dev) spin_lock_irqsave(&dev->tx_lock, flags); IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n", - __FUNCTION__, dev->tx_buff.len); + __func__, dev->tx_buff.len); if (likely(dev->tx_buff.len > 0)) { /* Write data left in transmit buffer */ @@ -450,7 +451,7 @@ void sirdev_write_complete(struct sir_dev *dev) else if (unlikely(actual<0)) { /* could be dropped later when we have tx_timeout to recover */ IRDA_ERROR("%s: drv->do_write failed (%d)\n", - __FUNCTION__, actual); + __func__, actual); if ((skb=dev->tx_skb) != NULL) { dev->tx_skb = NULL; dev_kfree_skb_any(skb); @@ -471,7 +472,7 @@ void sirdev_write_complete(struct sir_dev *dev) * restarted when the irda-thread has completed the request. */ - IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__); dev->raw_tx = 0; goto done; /* no post-frame handling in raw mode */ } @@ -488,7 +489,7 @@ void sirdev_write_complete(struct sir_dev *dev) * re-activated. */ - IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__); + IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__); if ((skb=dev->tx_skb) != NULL) { dev->tx_skb = NULL; @@ -498,14 +499,14 @@ void sirdev_write_complete(struct sir_dev *dev) } if (unlikely(dev->new_speed > 0)) { - IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__); + IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__); err = sirdev_schedule_speed(dev, dev->new_speed); if (unlikely(err)) { /* should never happen * forget the speed change and hope the stack recovers */ IRDA_ERROR("%s - schedule speed change failed: %d\n", - __FUNCTION__, err); + __func__, err); netif_wake_queue(dev->netdev); } /* else: success @@ -532,13 +533,13 @@ EXPORT_SYMBOL(sirdev_write_complete); int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) { if (!dev || !dev->netdev) { - IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__); + IRDA_WARNING("%s(), not ready yet!\n", __func__); return -1; } if (!dev->irlap) { IRDA_WARNING("%s - too early: %p / %zd!\n", - __FUNCTION__, cp, count); + __func__, cp, count); return -1; } @@ -548,7 +549,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) */ irda_device_set_media_busy(dev->netdev, TRUE); dev->stats.rx_dropped++; - IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count); + IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count); return 0; } @@ -600,7 +601,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) netif_stop_queue(ndev); - IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len); + IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len); speed = irda_get_next_speed(skb); if ((speed != dev->speed) && (speed != -1)) { @@ -637,7 +638,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) /* Check problems */ if(spin_is_locked(&dev->tx_lock)) { - IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), write not completed\n", __func__); } /* serialize with write completion */ @@ -666,7 +667,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) else if (unlikely(actual < 0)) { /* could be dropped later when we have tx_timeout to recover */ IRDA_ERROR("%s: drv->do_write failed (%d)\n", - __FUNCTION__, actual); + __func__, actual); dev_kfree_skb_any(skb); dev->stats.tx_errors++; dev->stats.tx_dropped++; @@ -687,7 +688,7 @@ static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) IRDA_ASSERT(dev != NULL, return -1;); - IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd); + IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -804,7 +805,7 @@ static int sirdev_open(struct net_device *ndev) if (!try_module_get(drv->owner)) return -ESTALE; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); if (sirdev_alloc_buffers(dev)) goto errout_dec; @@ -822,7 +823,7 @@ static int sirdev_open(struct net_device *ndev) netif_wake_queue(ndev); - IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed); + IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed); return 0; @@ -842,7 +843,7 @@ static int sirdev_close(struct net_device *ndev) struct sir_dev *dev = ndev->priv; const struct sir_driver *drv; -// IRDA_DEBUG(0, "%s\n", __FUNCTION__); +// IRDA_DEBUG(0, "%s\n", __func__); netif_stop_queue(ndev); @@ -878,7 +879,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n struct net_device *ndev; struct sir_dev *dev; - IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name); + IRDA_DEBUG(0, "%s - %s\n", __func__, name); /* instead of adding tests to protect against drv->do_write==NULL * at several places we refuse to create a sir_dev instance for @@ -892,7 +893,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n */ ndev = alloc_irdadev(sizeof(*dev)); if (ndev == NULL) { - IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__); + IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__); goto out; } dev = ndev->priv; @@ -921,7 +922,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n ndev->do_ioctl = sirdev_ioctl; if (register_netdev(ndev)) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto out_freenetdev; } @@ -938,7 +939,7 @@ int sirdev_put_instance(struct sir_dev *dev) { int err = 0; - IRDA_DEBUG(0, "%s\n", __FUNCTION__); + IRDA_DEBUG(0, "%s\n", __func__); atomic_set(&dev->enable_rx, 0); @@ -948,7 +949,7 @@ int sirdev_put_instance(struct sir_dev *dev) if (dev->dongle_drv) err = sirdev_schedule_dongle_close(dev); if (err) - IRDA_ERROR("%s - error %d\n", __FUNCTION__, err); + IRDA_ERROR("%s - error %d\n", __func__, err); sirdev_close(dev->netdev); diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c index 25d5b8a96bdc..36030241f7a9 100644 --- a/drivers/net/irda/sir_dongle.c +++ b/drivers/net/irda/sir_dongle.c @@ -36,7 +36,7 @@ int irda_register_dongle(struct dongle_driver *new) struct dongle_driver *drv; IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n", - __FUNCTION__, new->driver_name, new->type); + __func__, new->driver_name, new->type); mutex_lock(&dongle_list_lock); list_for_each(entry, &dongle_list) { diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 78dc8e7837f0..b5360fe99d3a 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -460,7 +460,7 @@ static int __init smsc_ircc_init(void) { int ret; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); ret = platform_driver_register(&smsc_ircc_driver); if (ret) { @@ -500,7 +500,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u struct net_device *dev; int err; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); err = smsc_ircc_present(fir_base, sir_base); if (err) @@ -508,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u err = -ENOMEM; if (dev_count >= ARRAY_SIZE(dev_self)) { - IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__); + IRDA_WARNING("%s(), too many devices!\n", __func__); goto err_out1; } @@ -517,7 +517,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u */ dev = alloc_irdadev(sizeof(struct smsc_ircc_cb)); if (!dev) { - IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__); + IRDA_WARNING("%s() can't allocate net device\n", __func__); goto err_out1; } @@ -633,14 +633,14 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get fir_base of 0x%03x\n", - __FUNCTION__, fir_base); + __func__, fir_base); goto out1; } if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get sir_base of 0x%03x\n", - __FUNCTION__, sir_base); + __func__, sir_base); goto out2; } @@ -656,7 +656,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", - __FUNCTION__, fir_base); + __func__, fir_base); goto out3; } IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, " @@ -793,7 +793,7 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -878,7 +878,7 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) unsigned long flags; s32 speed; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return 0;); @@ -953,21 +953,21 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_CRC; fast = 0; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__); break; case 1152000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_1152 | IRCC_CRC; fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA; IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", - __FUNCTION__); + __func__); break; case 4000000: ir_mode = IRCC_CFGA_IRDA_4PPM; ctrl = IRCC_CRC; fast = IRCC_LCR_A_FAST; IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", - __FUNCTION__); + __func__); break; } #if 0 @@ -995,7 +995,7 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) struct net_device *dev; int fir_base; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1043,7 +1043,7 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) { int fir_base; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); @@ -1067,7 +1067,7 @@ static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed) struct net_device *dev; int last_speed_was_sir; - IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1135,7 +1135,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) int lcr; /* Line control reg */ int divisor; - IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; @@ -1170,7 +1170,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); - IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed); } @@ -1253,7 +1253,7 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) int iobase = self->io.fir_base; u8 ctrl; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 1 /* Disable Rx */ register_bank(iobase, 0); @@ -1307,7 +1307,7 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) { int iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 0 /* Disable Tx */ register_bank(iobase, 0); @@ -1411,7 +1411,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) register_bank(iobase, 0); - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 0 /* Disable Rx */ register_bank(iobase, 0); @@ -1422,7 +1422,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) lsr= inb(iobase + IRCC_LSR); msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; - IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s: dma count = %d\n", __func__, get_dma_residue(self->io.dma)); len = self->rx_buff.truesize - get_dma_residue(self->io.dma); @@ -1445,15 +1445,15 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) len -= self->io.speed < 4000000 ? 2 : 4; if (len < 2 || len > 2050) { - IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len); + IRDA_WARNING("%s(), bogus len=%d\n", __func__, len); return; } - IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len); + IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len); skb = dev_alloc_skb(len + 1); if (!skb) { IRDA_WARNING("%s(), memory squeeze, dropping frame.\n", - __FUNCTION__); + __func__); return; } /* Make sure IP header gets aligned */ @@ -1494,7 +1494,7 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) /* Make sure we don't stay here to long */ if (boguscount++ > 32) { - IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), breaking!\n", __func__); break; } } while (inb(iobase + UART_LSR) & UART_LSR_DR); @@ -1536,7 +1536,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) lcra = inb(iobase + IRCC_LCR_A); lsr = inb(iobase + IRCC_LSR); - IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir); + IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir); if (iir & IRCC_IIR_EOM) { if (self->io.direction == IO_RECV) @@ -1548,7 +1548,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) } if (iir & IRCC_IIR_ACTIVE_FRAME) { - /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/ + /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/ } /* Enable interrupts again */ @@ -1587,11 +1587,11 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) lsr = inb(iobase + UART_LSR); IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", - __FUNCTION__, iir, lsr, iobase); + __func__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: - IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), RLSI\n", __func__); break; case UART_IIR_RDI: /* Receive interrupt */ @@ -1604,7 +1604,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) break; default: IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", - __FUNCTION__, iir); + __func__, iir); break; } @@ -1631,11 +1631,11 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self) int status = FALSE; /* int iobase; */ - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return FALSE;); - IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__, + IRDA_DEBUG(0, "%s: dma count = %d\n", __func__, get_dma_residue(self->io.dma)); status = (self->rx_buff.state != OUTSIDE_FRAME); @@ -1652,7 +1652,7 @@ static int smsc_ircc_request_irq(struct smsc_ircc_cb *self) self->netdev->name, self->netdev); if (error) IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n", - __FUNCTION__, self->io.irq, error); + __func__, self->io.irq, error); return error; } @@ -1696,21 +1696,21 @@ static int smsc_ircc_net_open(struct net_device *dev) struct smsc_ircc_cb *self; char hwname[16]; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); if (self->io.suspended) { - IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), device is suspended\n", __func__); return -EAGAIN; } if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, (void *) dev)) { IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n", - __FUNCTION__, self->io.irq); + __func__, self->io.irq); return -EAGAIN; } @@ -1734,7 +1734,7 @@ static int smsc_ircc_net_open(struct net_device *dev) smsc_ircc_net_close(dev); IRDA_WARNING("%s(), unable to allocate DMA=%d\n", - __FUNCTION__, self->io.dma); + __func__, self->io.dma); return -EAGAIN; } @@ -1753,7 +1753,7 @@ static int smsc_ircc_net_close(struct net_device *dev) { struct smsc_ircc_cb *self; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); @@ -1836,7 +1836,7 @@ static int smsc_ircc_resume(struct platform_device *dev) */ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) { - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -1848,12 +1848,12 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) smsc_ircc_stop_interrupts(self); /* Release the PORTS that this driver is using */ - IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, + IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); - IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, + IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); @@ -1875,7 +1875,7 @@ static void __exit smsc_ircc_cleanup(void) { int i; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); for (i = 0; i < 2; i++) { if (dev_self[i]) @@ -1899,7 +1899,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) struct net_device *dev; int fir_base, sir_base; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1926,7 +1926,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); - IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__); + IRDA_DEBUG(3, "%s() - exit\n", __func__); outb(0x00, fir_base + IRCC_MASTER); } @@ -1936,7 +1936,7 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) { int iobase; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); iobase = self->io.sir_base; /* Reset UART */ @@ -1962,7 +1962,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) IRDA_ASSERT(self != NULL, return;); - IRDA_DEBUG(4, "%s\n", __FUNCTION__); + IRDA_DEBUG(4, "%s\n", __func__); iobase = self->io.sir_base; @@ -1984,7 +1984,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) */ if (self->new_speed) { IRDA_DEBUG(5, "%s(), Changing speed to %d.\n", - __FUNCTION__, self->new_speed); + __func__, self->new_speed); smsc_ircc_sir_wait_hw_transmitter_finish(self); smsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; @@ -2023,7 +2023,7 @@ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) /* Tx FIFO should be empty! */ if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { - IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__); + IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__); return 0; } @@ -2123,7 +2123,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) udelay(1); if (count == 0) - IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__); } @@ -2145,7 +2145,7 @@ static int __init smsc_ircc_look_for_chips(void) while (address->cfg_base) { cfg_base = address->cfg_base; - /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/ + /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/ if (address->type & SMSCSIO_TYPE_FDC) { type = "FDC"; @@ -2184,7 +2184,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor u8 mode, dma, irq; int ret = -ENODEV; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) return ret; @@ -2192,10 +2192,10 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); mode = inb(cfgbase + 1); - /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/ + /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/ if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) - IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__); + IRDA_WARNING("%s(): IrDA not enabled\n", __func__); outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); sirbase = inb(cfgbase + 1) << 2; @@ -2212,7 +2212,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; - IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode); + IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode); if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) ret = 0; @@ -2234,7 +2234,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho unsigned short fir_io, sir_io; int ret = -ENODEV; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) return ret; @@ -2268,7 +2268,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); outb(reg, cfg_base); return inb(cfg_base) != reg ? -1 : 0; @@ -2278,7 +2278,7 @@ static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, { u8 devid, xdevid, rev; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); /* Leave configuration */ @@ -2353,7 +2353,7 @@ static int __init smsc_superio_fdc(unsigned short cfg_base) if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); } else { if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) @@ -2371,7 +2371,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); } else { if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) @@ -2932,7 +2932,7 @@ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) /* empty */; if (val) - IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__, + IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__, inb(fir_base + IRCC_ATC)); } diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c index d1ce5ae6a172..048a15422844 100644 --- a/drivers/net/irda/tekram-sir.c +++ b/drivers/net/irda/tekram-sir.c @@ -77,7 +77,7 @@ static int tekram_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -92,7 +92,7 @@ static int tekram_open(struct sir_dev *dev) static int tekram_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -130,7 +130,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) u8 byte; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch(state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -179,7 +179,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -204,7 +204,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) static int tekram_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Clear DTR, Set RTS */ sirdev_set_dtr_rts(dev, FALSE, TRUE); diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c index aa1a9b0ed83e..fcf287b749db 100644 --- a/drivers/net/irda/toim3232-sir.c +++ b/drivers/net/irda/toim3232-sir.c @@ -181,7 +181,7 @@ static int toim3232_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Pull the lines high to start with. * @@ -209,7 +209,7 @@ static int toim3232_open(struct sir_dev *dev) static int toim3232_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -241,7 +241,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) u8 byte; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch(state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -299,7 +299,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) break; default: - printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state); + printk(KERN_ERR "%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -344,7 +344,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) static int toim3232_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Switch off both DTR and RTS to switch off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 04ad3573b159..84e609ea5fbb 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -152,12 +152,12 @@ static int __init via_ircc_init(void) { int rc; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); rc = pci_register_driver(&via_driver); if (rc < 0) { IRDA_DEBUG(0, "%s(): error rc = %d, returning -ENODEV...\n", - __FUNCTION__, rc); + __func__, rc); return -ENODEV; } return 0; @@ -170,11 +170,11 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase; chipio_t info; - IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device); + IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device); rc = pci_enable_device (pcidev); if (rc) { - IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc); + IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc); return -ENODEV; } @@ -185,7 +185,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi Chipset=0x3076; if (Chipset==0x3076) { - IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__); WriteLPCReg(7,0x0c ); temp=ReadLPCReg(0x30);//check if BIOS Enable Fir @@ -222,7 +222,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi } else rc = -ENODEV; //IR not turn on } else { //Not VT1211 - IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__); pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir if((bTmp&0x01)==1) { // BIOS enable FIR @@ -262,7 +262,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi rc = -ENODEV; //IR not turn on !!!!! }//Not VT1211 - IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc); + IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc); return rc; } @@ -276,7 +276,7 @@ static void via_ircc_clean(void) { int i; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -286,7 +286,7 @@ static void via_ircc_clean(void) static void __devexit via_remove_one (struct pci_dev *pdev) { - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); /* FIXME : This is ugly. We should use pci_get_drvdata(pdev); * to get our driver instance and call directly via_ircc_close(). @@ -301,7 +301,7 @@ static void __devexit via_remove_one (struct pci_dev *pdev) static void __exit via_ircc_cleanup(void) { - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); /* FIXME : This should be redundant, as pci_unregister_driver() * should call via_remove_one() on each device. @@ -324,7 +324,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) struct via_ircc_cb *self; int err; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); if (i >= ARRAY_SIZE(dev_self)) return -ENOMEM; @@ -360,7 +360,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) /* Reserve the ioports that we need */ if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) { IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); err = -ENODEV; goto err_out1; } @@ -471,7 +471,7 @@ static int via_ircc_close(struct via_ircc_cb *self) { int iobase; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -483,7 +483,7 @@ static int via_ircc_close(struct via_ircc_cb *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(2, "%s(), Releasing Region %03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) dma_free_coherent(NULL, self->tx_buff.truesize, @@ -509,7 +509,7 @@ static void via_hw_init(struct via_ircc_cb *self) { int iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095 // FIFO Init @@ -582,7 +582,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, speed = speed; IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n", - __FUNCTION__, speed, iobase, dongle_id); + __func__, speed, iobase, dongle_id); switch (dongle_id) { @@ -671,7 +671,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, case 0x11: /* Temic TFDS4500 */ - IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__); + IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__); UseOneRX(iobase, ON); //use ONE RX....RX1 InvertTX(iobase, OFF); @@ -689,7 +689,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, SlowIRRXLowActive(iobase, OFF); } else{ - IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__); + IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__); } break; @@ -707,7 +707,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, default: IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n", - __FUNCTION__, dongle_id); + __func__, dongle_id); } } @@ -726,7 +726,7 @@ static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed) iobase = self->io.fir_base; /* Update accounting for new speed */ self->io.speed = speed; - IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed); + IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed); WriteReg(iobase, I_ST_CT_0, 0x0); @@ -957,7 +957,7 @@ static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase) self->tx_buff.head) + self->tx_buff_dma, self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE); IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n", - __FUNCTION__, self->tx_fifo.ptr, + __func__, self->tx_fifo.ptr, self->tx_fifo.queue[self->tx_fifo.ptr].len, self->tx_fifo.len); @@ -981,7 +981,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) int ret = TRUE; u8 Tx_status; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); iobase = self->io.fir_base; /* Disable DMA */ @@ -1014,7 +1014,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) } IRDA_DEBUG(1, "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n", - __FUNCTION__, + __func__, self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free); /* F01_S // Any frames to be sent back-to-back? @@ -1050,7 +1050,7 @@ static int via_ircc_dma_receive(struct via_ircc_cb *self) iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; self->tx_fifo.tail = self->tx_buff.head; @@ -1134,13 +1134,13 @@ static int via_ircc_dma_receive_complete(struct via_ircc_cb *self, return TRUE; //interrupt only, data maybe move by RxT if (((len - 4) < 2) || ((len - 4) > 2048)) { IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n", - __FUNCTION__, len, RxCurCount(iobase, self), + __func__, len, RxCurCount(iobase, self), self->RxLastCount); hwreset(self); return FALSE; } IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n", - __FUNCTION__, + __func__, st_fifo->len, len - 4, RxCurCount(iobase, self)); st_fifo->entries[st_fifo->tail].status = status; @@ -1187,7 +1187,7 @@ F01_E */ skb_put(skb, len - 4); skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4); - IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__, len - 4, self->rx_buff.data); // Move to next frame @@ -1217,7 +1217,7 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase) len = GetRecvByte(iobase, self); - IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len); + IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len); if ((len - 4) < 2) { self->stats.rx_dropped++; @@ -1302,7 +1302,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase) skb_put(skb, len - 4); skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4); - IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__, len - 4, st_fifo->head); // Move to next frame @@ -1318,7 +1318,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase) IRDA_DEBUG(2, "%s(): End of upload HostStatus=%x,RxStatus=%x\n", - __FUNCTION__, + __func__, GetHostStatus(iobase), GetRXStatus(iobase)); /* @@ -1358,7 +1358,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iHostIntType = GetHostStatus(iobase); IRDA_DEBUG(4, "%s(): iHostIntType %02x: %s %s %s %02x\n", - __FUNCTION__, iHostIntType, + __func__, iHostIntType, (iHostIntType & 0x40) ? "Timer" : "", (iHostIntType & 0x20) ? "Tx" : "", (iHostIntType & 0x10) ? "Rx" : "", @@ -1388,7 +1388,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iTxIntType = GetTXStatus(iobase); IRDA_DEBUG(4, "%s(): iTxIntType %02x: %s %s %s %s\n", - __FUNCTION__, iTxIntType, + __func__, iTxIntType, (iTxIntType & 0x08) ? "FIFO underr." : "", (iTxIntType & 0x04) ? "EOM" : "", (iTxIntType & 0x02) ? "FIFO ready" : "", @@ -1412,7 +1412,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iRxIntType = GetRXStatus(iobase); IRDA_DEBUG(4, "%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n", - __FUNCTION__, iRxIntType, + __func__, iRxIntType, (iRxIntType & 0x80) ? "PHY err." : "", (iRxIntType & 0x40) ? "CRC err" : "", (iRxIntType & 0x20) ? "FIFO overr." : "", @@ -1421,7 +1421,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) (iRxIntType & 0x02) ? "RxMaxLen" : "", (iRxIntType & 0x01) ? "SIR bad" : ""); if (!iRxIntType) - IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__); if (iRxIntType & 0x10) { if (via_ircc_dma_receive_complete(self, iobase)) { @@ -1431,7 +1431,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) } // No ERR else { //ERR IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n", - __FUNCTION__, iRxIntType, iHostIntType, + __func__, iRxIntType, iHostIntType, RxCurCount(iobase, self), self->RxLastCount); @@ -1456,7 +1456,7 @@ static void hwreset(struct via_ircc_cb *self) int iobase; iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); ResetChip(iobase, 5); EnableDMA(iobase, OFF); @@ -1501,7 +1501,7 @@ static int via_ircc_is_receiving(struct via_ircc_cb *self) if (CkRxRecv(iobase, self)) status = TRUE; - IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status); + IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status); return status; } @@ -1519,7 +1519,7 @@ static int via_ircc_net_open(struct net_device *dev) int iobase; char hwname[32]; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct via_ircc_cb *) dev->priv; @@ -1586,7 +1586,7 @@ static int via_ircc_net_close(struct net_device *dev) struct via_ircc_cb *self; int iobase; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct via_ircc_cb *) dev->priv; @@ -1630,7 +1630,7 @@ static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, IRDA_ASSERT(dev != NULL, return -1;); self = dev->priv; IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, + IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); /* Disable interrupts & save flags */ spin_lock_irqsave(&self->lock, flags); diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index d15e00b8591e..18f4b3a96aed 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -140,15 +140,15 @@ static void vlsi_ring_debug(struct vlsi_ring *r) unsigned i; printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n", - __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw); - printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__, + __func__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw); + printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __func__, atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask); for (i = 0; i < r->size; i++) { rd = &r->rd[i]; - printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i); + printk(KERN_DEBUG "%s - ring descr %u: ", __func__, i); printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw); printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n", - __FUNCTION__, (unsigned) rd_get_status(rd), + __func__, (unsigned) rd_get_status(rd), (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd)); } } @@ -435,7 +435,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) { if (rd->buf) { IRDA_ERROR("%s: failed to create PCI-MAP for %p", - __FUNCTION__, rd->buf); + __func__, rd->buf); kfree(rd->buf); rd->buf = NULL; } @@ -489,7 +489,7 @@ static int vlsi_create_hwif(vlsi_irda_dev_t *idev) ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr); if (!ringarea) { IRDA_ERROR("%s: insufficient memory for descriptor rings\n", - __FUNCTION__); + __func__); goto out; } memset(ringarea, 0, HW_RING_AREA_SIZE); @@ -564,7 +564,7 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd) crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16); len -= crclen; /* remove trailing CRC */ if (len <= 0) { - IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len); + IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len); ret |= VLSI_RX_DROP; goto done; } @@ -579,14 +579,14 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd) */ le16_to_cpus(rd->buf+len); if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) { - IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__); + IRDA_DEBUG(0, "%s: crc error\n", __func__); ret |= VLSI_RX_CRC; goto done; } } if (!rd->skb) { - IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__); + IRDA_WARNING("%s: rx packet lost\n", __func__); ret |= VLSI_RX_DROP; goto done; } @@ -617,7 +617,7 @@ static void vlsi_fill_rx(struct vlsi_ring *r) for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) { if (rd_is_active(rd)) { IRDA_WARNING("%s: driver bug: rx descr race with hw\n", - __FUNCTION__); + __func__); vlsi_ring_debug(r); break; } @@ -676,7 +676,7 @@ static void vlsi_rx_interrupt(struct net_device *ndev) if (ring_first(r) == NULL) { /* we are in big trouble, if this should ever happen */ - IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__); + IRDA_ERROR("%s: rx ring exhausted!\n", __func__); vlsi_ring_debug(r); } else @@ -697,7 +697,7 @@ static void vlsi_unarm_rx(vlsi_irda_dev_t *idev) if (rd_is_active(rd)) { rd_set_status(rd, 0); if (rd_get_count(rd)) { - IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__); + IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__); ret = -VLSI_RX_DROP; } rd_set_count(rd, 0); @@ -772,7 +772,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) int fifocnt; baudrate = idev->new_baud; - IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud); + IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud); if (baudrate == 4000000) { mode = IFF_FIR; config = IRCFG_FIR; @@ -789,7 +789,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) switch(baudrate) { default: IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n", - __FUNCTION__, baudrate); + __func__, baudrate); baudrate = 9600; /* fallthru */ case 2400: @@ -806,7 +806,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { - IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt); } outw(0, iobase+VLSI_PIO_IRENABLE); @@ -830,14 +830,14 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) config ^= IRENABLE_SIR_ON; if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) { - IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__, + IRDA_WARNING("%s: failed to set %s mode!\n", __func__, (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR")); ret = -1; } else { if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) { IRDA_WARNING("%s: failed to apply baudrate %d\n", - __FUNCTION__, baudrate); + __func__, baudrate); ret = -1; } else { @@ -849,7 +849,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) } if (ret) - vlsi_reg_debug(iobase,__FUNCTION__); + vlsi_reg_debug(iobase,__func__); return ret; } @@ -982,7 +982,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (len >= r->len-5) IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n", - __FUNCTION__); + __func__); } else { /* hw deals with MIR/FIR mode wrapping */ @@ -1027,7 +1027,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { - IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt); } config = inw(iobase+VLSI_PIO_IRCFG); @@ -1040,7 +1040,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (ring_put(r) == NULL) { netif_stop_queue(ndev); - IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__); + IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__); } spin_unlock_irqrestore(&idev->lock, flags); @@ -1049,7 +1049,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) drop_unlock: spin_unlock_irqrestore(&idev->lock, flags); drop: - IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg); + IRDA_WARNING("%s: dropping packet - %s\n", __func__, msg); dev_kfree_skb_any(skb); idev->stats.tx_errors++; idev->stats.tx_dropped++; @@ -1106,7 +1106,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev) fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", - __FUNCTION__, fifocnt); + __func__, fifocnt); } outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG); } @@ -1115,7 +1115,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev) if (netif_queue_stopped(ndev) && !idev->new_baud) { netif_wake_queue(ndev); - IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__); + IRDA_DEBUG(3, "%s: queue awoken\n", __func__); } } @@ -1138,7 +1138,7 @@ static void vlsi_unarm_tx(vlsi_irda_dev_t *idev) dev_kfree_skb_any(rd->skb); rd->skb = NULL; } - IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__); + IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__); ret = -VLSI_TX_DROP; } else @@ -1188,7 +1188,7 @@ static int vlsi_start_clock(struct pci_dev *pdev) if (count < 3) { if (clksrc == 1) { /* explicitly asked for PLL hence bail out */ IRDA_ERROR("%s: no PLL or failed to lock!\n", - __FUNCTION__); + __func__); clkctl = CLKCTL_CLKSTP; pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); return -1; @@ -1197,7 +1197,7 @@ static int vlsi_start_clock(struct pci_dev *pdev) clksrc = 3; /* fallback to 40MHz XCLK (OB800) */ IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n", - __FUNCTION__, clksrc); + __func__, clksrc); } else clksrc = 1; /* got successful PLL lock */ @@ -1269,7 +1269,7 @@ static int vlsi_init_chip(struct pci_dev *pdev) /* start the clock and clean the registers */ if (vlsi_start_clock(pdev)) { - IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__); + IRDA_ERROR("%s: no valid clock source\n", __func__); return -1; } iobase = ndev->base_addr; @@ -1386,7 +1386,7 @@ static void vlsi_tx_timeout(struct net_device *ndev) vlsi_irda_dev_t *idev = ndev->priv; - vlsi_reg_debug(ndev->base_addr, __FUNCTION__); + vlsi_reg_debug(ndev->base_addr, __func__); vlsi_ring_debug(idev->tx_ring); if (netif_running(ndev)) @@ -1401,7 +1401,7 @@ static void vlsi_tx_timeout(struct net_device *ndev) if (vlsi_start_hw(idev)) IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n", - __FUNCTION__, pci_name(idev->pdev), ndev->name); + __func__, pci_name(idev->pdev), ndev->name); else netif_start_queue(ndev); } @@ -1446,7 +1446,7 @@ static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) break; default: IRDA_WARNING("%s: notsupp - cmd=%04x\n", - __FUNCTION__, cmd); + __func__, cmd); ret = -EOPNOTSUPP; } @@ -1491,7 +1491,7 @@ static irqreturn_t vlsi_interrupt(int irq, void *dev_instance) if (boguscount <= 0) IRDA_MESSAGE("%s: too much work in interrupt!\n", - __FUNCTION__); + __func__); return IRQ_RETVAL(handled); } @@ -1504,7 +1504,7 @@ static int vlsi_open(struct net_device *ndev) char hwname[32]; if (pci_request_regions(idev->pdev, drivername)) { - IRDA_WARNING("%s: io resource busy\n", __FUNCTION__); + IRDA_WARNING("%s: io resource busy\n", __func__); goto errout; } ndev->base_addr = pci_resource_start(idev->pdev,0); @@ -1519,7 +1519,7 @@ static int vlsi_open(struct net_device *ndev) if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED, drivername, ndev)) { IRDA_WARNING("%s: couldn't get IRQ: %d\n", - __FUNCTION__, ndev->irq); + __func__, ndev->irq); goto errout_io; } @@ -1540,7 +1540,7 @@ static int vlsi_open(struct net_device *ndev) netif_start_queue(ndev); - IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name); + IRDA_MESSAGE("%s: device %s operational\n", __func__, ndev->name); return 0; @@ -1574,7 +1574,7 @@ static int vlsi_close(struct net_device *ndev) pci_release_regions(idev->pdev); - IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name); + IRDA_MESSAGE("%s: device %s stopped\n", __func__, ndev->name); return 0; } @@ -1593,7 +1593,7 @@ static int vlsi_irda_init(struct net_device *ndev) if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW) || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) { - IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__); + IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__); return -1; } @@ -1645,14 +1645,14 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) if ( !pci_resource_start(pdev,0) || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) { - IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__); + IRDA_ERROR("%s: bar 0 invalid", __func__); goto out_disable; } ndev = alloc_irdadev(sizeof(*idev)); if (ndev==NULL) { IRDA_ERROR("%s: Unable to allocate device memory.\n", - __FUNCTION__); + __func__); goto out_disable; } @@ -1667,7 +1667,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_freedev; if (register_netdev(ndev) < 0) { - IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__); + IRDA_ERROR("%s: register_netdev failed\n", __func__); goto out_freedev; } @@ -1678,7 +1678,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) vlsi_proc_root, VLSI_PROC_FOPS, ndev); if (!ent) { IRDA_WARNING("%s: failed to create proc entry\n", - __FUNCTION__); + __func__); } else { ent->size = 0; } @@ -1745,7 +1745,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) if (!ndev) { IRDA_ERROR("%s - %s: no netdevice \n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } idev = ndev->priv; @@ -1756,7 +1756,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) pdev->current_state = state.event; } else - IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event); + IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __func__, pci_name(pdev), pdev->current_state, state.event); mutex_unlock(&idev->mtx); return 0; } @@ -1784,7 +1784,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) if (!ndev) { IRDA_ERROR("%s - %s: no netdevice \n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } idev = ndev->priv; @@ -1792,7 +1792,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) if (pdev->current_state == 0) { mutex_unlock(&idev->mtx); IRDA_WARNING("%s - %s: already resumed\n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } @@ -1811,7 +1811,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) * now we explicitly set pdev->current_state = 0 after enabling the * device and independently resume_ok should catch any garbage config. */ - IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__); + IRDA_WARNING("%s - hm, nothing to resume?\n", __func__); mutex_unlock(&idev->mtx); return 0; } diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index c8b9c74eea52..9b1884329fba 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -617,7 +617,7 @@ static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s) */ if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) { - IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__); + IRDA_ERROR("%s: pci busaddr inconsistency!\n", __func__); dump_stack(); return; } diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index 9fd2451b0fb2..002a6d769f21 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -114,7 +114,7 @@ static int __init w83977af_init(void) { int i; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) { if (w83977af_open(i, io[i], irq[i], dma[i]) == 0) @@ -133,7 +133,7 @@ static void __exit w83977af_cleanup(void) { int i; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -154,12 +154,12 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq, struct w83977af_ir *self; int err; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); /* Lock the port that we need */ if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) { IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n", - __FUNCTION__ , iobase); + __func__ , iobase); return -ENODEV; } @@ -241,7 +241,7 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq, err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__); goto err_out3; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); @@ -273,7 +273,7 @@ static int w83977af_close(struct w83977af_ir *self) { int iobase; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); iobase = self->io.fir_base; @@ -294,7 +294,7 @@ static int w83977af_close(struct w83977af_ir *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", - __FUNCTION__ , self->io.fir_base); + __func__ , self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -316,7 +316,7 @@ int w83977af_probe( int iobase, int irq, int dma) int i; for (i=0; i < 2; i++) { - IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG( 0, "%s()\n", __func__ ); #ifdef CONFIG_USE_W977_PNP /* Enter PnP configuration mode */ w977_efm_enter(efbase[i]); @@ -403,7 +403,7 @@ int w83977af_probe( int iobase, int irq, int dma) return 0; } else { /* Try next extented function register address */ - IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ ); + IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ ); } } return -1; @@ -439,19 +439,19 @@ void w83977af_change_speed(struct w83977af_ir *self, __u32 speed) case 115200: outb(0x01, iobase+ABLL); break; case 576000: ir_mode = HCR_MIR_576; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ ); break; case 1152000: ir_mode = HCR_MIR_1152; - IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ ); break; case 4000000: ir_mode = HCR_FIR; - IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ ); break; default: ir_mode = HCR_FIR; - IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed); + IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed); break; } @@ -501,7 +501,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev) iobase = self->io.fir_base; - IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies, + IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies, (int) skb->len); /* Lock transmit buffer */ @@ -549,7 +549,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev) outb(ICR_ETMRI, iobase+ICR); } else { #endif - IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt); + IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt); if (mtt) udelay(mtt); @@ -591,7 +591,7 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase) unsigned long flags; __u8 hcr; #endif - IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len); + IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len); /* Save current set */ set = inb(iobase+SSR); @@ -643,7 +643,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) int actual = 0; __u8 set; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); /* Save current bank */ set = inb(iobase+SSR); @@ -651,11 +651,11 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) switch_bank(iobase, SET0); if (!(inb_p(iobase+USR) & USR_TSRE)) { IRDA_DEBUG(4, - "%s(), warning, FIFO not empty yet!\n", __FUNCTION__ ); + "%s(), warning, FIFO not empty yet!\n", __func__ ); fifo_size -= 17; IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", - __FUNCTION__ , fifo_size); + __func__ , fifo_size); } /* Fill FIFO with current frame */ @@ -665,7 +665,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) } IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", - __FUNCTION__ , fifo_size, actual, len); + __func__ , fifo_size, actual, len); /* Restore bank */ outb(set, iobase+SSR); @@ -685,7 +685,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) int iobase; __u8 set; - IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies); + IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies); IRDA_ASSERT(self != NULL, return;); @@ -700,7 +700,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) /* Check for underrrun! */ if (inb(iobase+AUDR) & AUDR_UNDR) { - IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ ); self->stats.tx_errors++; self->stats.tx_fifo_errors++; @@ -741,7 +741,7 @@ int w83977af_dma_receive(struct w83977af_ir *self) #endif IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(4, "%s\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s\n", __func__ ); iobase= self->io.fir_base; @@ -812,7 +812,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self) __u8 set; __u8 status; - IRDA_DEBUG(4, "%s\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s\n", __func__ ); st_fifo = &self->st_fifo; @@ -892,7 +892,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self) skb = dev_alloc_skb(len+1); if (skb == NULL) { printk(KERN_INFO - "%s(), memory squeeze, dropping frame.\n", __FUNCTION__); + "%s(), memory squeeze, dropping frame.\n", __func__); /* Restore set register */ outb(set, iobase+SSR); @@ -943,7 +943,7 @@ static void w83977af_pio_receive(struct w83977af_ir *self) __u8 byte = 0x00; int iobase; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return;); @@ -970,7 +970,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr) __u8 set; int iobase; - IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr); + IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr); iobase = self->io.fir_base; /* Transmit FIFO low on data */ @@ -1007,7 +1007,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr) /* Check if we need to change the speed? */ if (self->new_speed) { IRDA_DEBUG(2, - "%s(), Changing speed!\n", __FUNCTION__ ); + "%s(), Changing speed!\n", __func__ ); w83977af_change_speed(self, self->new_speed); self->new_speed = 0; } @@ -1189,7 +1189,7 @@ static int w83977af_net_open(struct net_device *dev) char hwname[32]; __u8 set; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); self = (struct w83977af_ir *) dev->priv; @@ -1252,7 +1252,7 @@ static int w83977af_net_close(struct net_device *dev) int iobase; __u8 set; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1307,7 +1307,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); spin_lock_irqsave(&self->lock, flags); diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8a97a0066a88..46819af3b062 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -55,7 +55,7 @@ #include <asm/system.h> static char mv643xx_eth_driver_name[] = "mv643xx_eth"; -static char mv643xx_eth_driver_version[] = "1.1"; +static char mv643xx_eth_driver_version[] = "1.2"; #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX #define MV643XX_ETH_NAPI @@ -90,12 +90,21 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_SERIAL_CONTROL(p) (0x043c + ((p) << 10)) #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 +#define TX_IN_PROGRESS 0x00000080 +#define PORT_SPEED_MASK 0x00000030 +#define PORT_SPEED_1000 0x00000010 +#define PORT_SPEED_100 0x00000020 +#define PORT_SPEED_10 0x00000000 +#define FLOW_CONTROL_ENABLED 0x00000008 +#define FULL_DUPLEX 0x00000004 +#define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) #define TX_BW_MTU(p) (0x0458 + ((p) << 10)) #define TX_BW_BURST(p) (0x045c + ((p) << 10)) #define INT_CAUSE(p) (0x0460 + ((p) << 10)) +#define INT_TX_END_0 0x00080000 #define INT_TX_END 0x07f80000 #define INT_RX 0x0007fbfc #define INT_EXT 0x00000002 @@ -127,21 +136,21 @@ static char mv643xx_eth_driver_version[] = "1.1"; /* * SDMA configuration register. */ -#define RX_BURST_SIZE_4_64BIT (2 << 1) +#define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) -#define TX_BURST_SIZE_4_64BIT (2 << 22) +#define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ - TX_BURST_SIZE_4_64BIT + RX_BURST_SIZE_16_64BIT | \ + TX_BURST_SIZE_16_64BIT #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ + RX_BURST_SIZE_16_64BIT | \ BLM_RX_NO_SWAP | \ BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_4_64BIT + TX_BURST_SIZE_16_64BIT #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif @@ -153,9 +162,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_MII_SPEED_TO_100 (1 << 24) #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) -#define MAX_RX_PACKET_1522BYTE (1 << 17) #define MAX_RX_PACKET_9700BYTE (5 << 17) -#define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) #define DO_NOT_FORCE_LINK_FAIL (1 << 10) #define SERIAL_PORT_CONTROL_RESERVED (1 << 9) @@ -228,6 +235,8 @@ struct tx_desc { #define GEN_IP_V4_CHECKSUM 0x00040000 #define GEN_TCP_UDP_CHECKSUM 0x00020000 #define UDP_FRAME 0x00010000 +#define MAC_HDR_EXTRA_4_BYTES 0x00008000 +#define MAC_HDR_EXTRA_8_BYTES 0x00000200 #define TX_IHL_SHIFT 11 @@ -404,6 +413,17 @@ static void rxq_disable(struct rx_queue *rxq) udelay(10); } +static void txq_reset_hw_ptr(struct tx_queue *txq) +{ + struct mv643xx_eth_private *mp = txq_to_mp(txq); + int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index); + u32 addr; + + addr = (u32)txq->tx_desc_dma; + addr += txq->tx_curr_desc * sizeof(struct tx_desc); + wrl(mp, off, addr); +} + static void txq_enable(struct tx_queue *txq) { struct mv643xx_eth_private *mp = txq_to_mp(txq); @@ -614,6 +634,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + if (netif_carrier_ok(mp->dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } #endif @@ -706,6 +732,7 @@ static inline __be16 sum16_as_be(__sum16 sum) static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int tx_index; struct tx_desc *desc; @@ -732,12 +759,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); if (skb->ip_summed == CHECKSUM_PARTIAL) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); + int mac_hdr_len; + + BUG_ON(skb->protocol != htons(ETH_P_IP) && + skb->protocol != htons(ETH_P_8021Q)); cmd_sts |= GEN_TCP_UDP_CHECKSUM | GEN_IP_V4_CHECKSUM | ip_hdr(skb)->ihl << TX_IHL_SHIFT; + mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data; + switch (mac_hdr_len - ETH_HLEN) { + case 0: + break; + case 4: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + break; + case 8: + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + case 12: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + default: + if (net_ratelimit()) + dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev, + "mac header length is %d?!\n", mac_hdr_len); + break; + } + switch (ip_hdr(skb)->protocol) { case IPPROTO_UDP: cmd_sts |= UDP_FRAME; @@ -759,6 +810,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) wmb(); desc->cmd_sts = cmd_sts; + /* clear TX_END interrupt status */ + wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index)); + rdl(mp, INT_CAUSE(mp->port_num)); + /* ensure all descriptors are written before poking hardware */ wmb(); txq_enable(txq); @@ -1112,10 +1167,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd * static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd) { + struct mv643xx_eth_private *mp = netdev_priv(dev); + u32 port_status; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + cmd->supported = SUPPORTED_MII; cmd->advertising = ADVERTISED_MII; - cmd->speed = SPEED_1000; - cmd->duplex = DUPLEX_FULL; + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + cmd->speed = SPEED_10; + break; + case PORT_SPEED_100: + cmd->speed = SPEED_100; + break; + case PORT_SPEED_1000: + cmd->speed = SPEED_1000; + break; + default: + cmd->speed = -1; + break; + } + cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; cmd->port = PORT_MII; cmd->phy_address = 0; cmd->transceiver = XCVR_INTERNAL; @@ -1539,8 +1612,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) tx_desc = (struct tx_desc *)txq->tx_desc_area; for (i = 0; i < txq->tx_ring_size; i++) { + struct tx_desc *txd = tx_desc + i; int nexti = (i + 1) % txq->tx_ring_size; - tx_desc[i].next_desc_ptr = txq->tx_desc_dma + + + txd->cmd_sts = 0; + txd->next_desc_ptr = txq->tx_desc_dma + nexti * sizeof(struct tx_desc); } @@ -1577,8 +1653,11 @@ static void txq_reclaim(struct tx_queue *txq, int force) desc = &txq->tx_desc_area[tx_index]; cmd_sts = desc->cmd_sts; - if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA)) - break; + if (cmd_sts & BUFFER_OWNED_BY_DMA) { + if (!force) + break; + desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA; + } txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size; txq->tx_desc_count--; @@ -1632,49 +1711,61 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ -static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) +static void handle_link_event(struct mv643xx_eth_private *mp) { - u32 pscr_o; - u32 pscr_n; - - pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + struct net_device *dev = mp->dev; + u32 port_status; + int speed; + int duplex; + int fc; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + if (!(port_status & LINK_UP)) { + if (netif_carrier_ok(dev)) { + int i; - /* clear speed, duplex and rx buffer size fields */ - pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 | - SET_GMII_SPEED_TO_1000 | - SET_FULL_DUPLEX_MODE | - MAX_RX_PACKET_MASK); + printk(KERN_INFO "%s: link down\n", dev->name); - if (speed == SPEED_1000) { - pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE; - } else { - if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - pscr_n |= MAX_RX_PACKET_1522BYTE; - } + netif_carrier_off(dev); + netif_stop_queue(dev); - if (duplex == DUPLEX_FULL) - pscr_n |= SET_FULL_DUPLEX_MODE; + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; - if (pscr_n != pscr_o) { - if ((pscr_o & SERIAL_PORT_ENABLE) == 0) - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - else { - int i; + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } + } + return; + } - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_disable(mp->txq + i); + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + speed = 10; + break; + case PORT_SPEED_100: + speed = 100; + break; + case PORT_SPEED_1000: + speed = 1000; + break; + default: + speed = -1; + break; + } + duplex = (port_status & FULL_DUPLEX) ? 1 : 0; + fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0; - pscr_o &= ~SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); + printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " + "flow control %sabled\n", dev->name, + speed, duplex ? "full" : "half", + fc ? "en" : "dis"); - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - } + if (!netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netif_wake_queue(dev); } } @@ -1684,7 +1775,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) struct mv643xx_eth_private *mp = netdev_priv(dev); u32 int_cause; u32 int_cause_ext; - u32 txq_active; int_cause = rdl(mp, INT_CAUSE(mp->port_num)) & (INT_TX_END | INT_RX | INT_EXT); @@ -1698,30 +1788,8 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext); } - if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - int i; - - if (mp->phy_addr != -1) { - struct ethtool_cmd cmd; - - mii_ethtool_gset(&mp->mii, &cmd); - update_pscr(mp, cmd.speed, cmd.duplex); - } - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - - if (!netif_carrier_ok(dev)) { - netif_carrier_on(dev); - __txq_maybe_wake(mp->txq + mp->txq_primary); - } - } else if (netif_carrier_ok(dev)) { - netif_stop_queue(dev); - netif_carrier_off(dev); - } - } + if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) + handle_link_event(mp); /* * RxBuffer or RxError set for any of the 8 queues? @@ -1743,8 +1811,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } #endif - txq_active = rdl(mp, TXQ_COMMAND(mp->port_num)); - /* * TxBuffer or TxError set for any of the 8 queues? */ @@ -1754,6 +1820,16 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + /* + * Enough space again in the primary TX queue for a + * full packet? + */ + if (netif_carrier_ok(dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } /* @@ -1763,19 +1839,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) int i; wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END)); + + spin_lock(&mp->lock); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - if (txq->tx_desc_count && !((txq_active >> i) & 1)) + u32 hw_desc_ptr; + u32 expected_ptr; + + if ((int_cause & (INT_TX_END_0 << i)) == 0) + continue; + + hw_desc_ptr = + rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i)); + expected_ptr = (u32)txq->tx_desc_dma + + txq->tx_curr_desc * sizeof(struct tx_desc); + + if (hw_desc_ptr != expected_ptr) txq_enable(txq); } - } - - /* - * Enough space again in the primary TX queue for a full packet? - */ - if (int_cause_ext & INT_EXT_TX) { - struct tx_queue *txq = mp->txq + mp->txq_primary; - __txq_maybe_wake(txq); + spin_unlock(&mp->lock); } return IRQ_HANDLED; @@ -1785,14 +1867,14 @@ static void phy_reset(struct mv643xx_eth_private *mp) { unsigned int data; - smi_reg_read(mp, mp->phy_addr, 0, &data); - data |= 0x8000; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + data |= BMCR_RESET; + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); do { udelay(1); - smi_reg_read(mp, mp->phy_addr, 0, &data); - } while (data & 0x8000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + } while (data & BMCR_RESET); } static void port_start(struct mv643xx_eth_private *mp) @@ -1801,23 +1883,6 @@ static void port_start(struct mv643xx_eth_private *mp) int i; /* - * Configure basic link parameters. - */ - pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL | - DISABLE_AUTO_NEG_SPEED_GMII | - DISABLE_AUTO_NEG_FOR_DUPLEX | - DO_NOT_FORCE_LINK_FAIL | - SERIAL_PORT_CONTROL_RESERVED; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - - wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); - - /* * Perform PHY reset, if there is a PHY. */ if (mp->phy_addr != -1) { @@ -1829,21 +1894,31 @@ static void port_start(struct mv643xx_eth_private *mp) } /* + * Configure basic link parameters. + */ + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + + pscr |= SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + pscr |= DO_NOT_FORCE_LINK_FAIL; + if (mp->phy_addr == -1) + pscr |= FORCE_LINK_PASS; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); + + /* * Configure TX path and queues. */ tx_set_rate(mp, 1000000000, 16777216); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i); - u32 addr; if ((mp->txq_mask & (1 << i)) == 0) continue; - addr = (u32)txq->tx_desc_dma; - addr += txq->tx_curr_desc * sizeof(struct tx_desc); - wrl(mp, off, addr); - + txq_reset_hw_ptr(txq); txq_set_rate(txq, 1000000000, 16777216); txq_set_fixed_prio_mode(txq); } @@ -1965,6 +2040,9 @@ static int mv643xx_eth_open(struct net_device *dev) napi_enable(&mp->napi); #endif + netif_carrier_off(dev); + netif_stop_queue(dev); + port_start(mp); set_rx_coal(mp, 0); @@ -1999,8 +2077,14 @@ static void port_reset(struct mv643xx_eth_private *mp) if (mp->txq_mask & (1 << i)) txq_disable(mp->txq + i); } - while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY)) + + while (1) { + u32 ps = rdl(mp, PORT_STATUS(mp->port_num)); + + if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY) + break; udelay(10); + } /* Reset the Enable bit in the Configuration Register */ data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); @@ -2202,7 +2286,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev) int ret; if (!mv643xx_eth_version_printed++) - printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n"); + printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet " + "driver version %s\n", mv643xx_eth_driver_version); ret = -EINVAL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2338,14 +2423,14 @@ static int phy_detect(struct mv643xx_eth_private *mp) unsigned int data; unsigned int data2; - smi_reg_read(mp, mp->phy_addr, 0, &data); - smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE); - smi_reg_read(mp, mp->phy_addr, 0, &data2); - if (((data ^ data2) & 0x1000) == 0) + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2); + if (((data ^ data2) & BMCR_ANENABLE) == 0) return -ENODEV; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); return 0; } @@ -2393,12 +2478,39 @@ static int phy_init(struct mv643xx_eth_private *mp, cmd.duplex = pd->duplex; } - update_pscr(mp, cmd.speed, cmd.duplex); mv643xx_eth_set_settings(mp->dev, &cmd); return 0; } +static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) +{ + u32 pscr; + + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + if (pscr & SERIAL_PORT_ENABLE) { + pscr &= ~SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + } + + pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED; + if (mp->phy_addr == -1) { + pscr |= DISABLE_AUTO_NEG_SPEED_GMII; + if (speed == SPEED_1000) + pscr |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + + pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL; + + pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX; + if (duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + } + + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); +} + static int mv643xx_eth_probe(struct platform_device *pdev) { struct mv643xx_eth_platform_data *pd; @@ -2452,6 +2564,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) } else { SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless); } + init_pscr(mp, pd->speed, pd->duplex); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -2478,6 +2591,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) * have to map the buffers to ISA memory which is only 16 MB */ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM; #endif SET_NETDEV_DEV(dev, &pdev->dev); diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 2fec6122c7fa..42443d697423 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = eip_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); ret = register_netdev(dev); if (ret) @@ -794,7 +794,7 @@ retry: if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); - NS8390_init(dev,1); + NS8390p_init(dev, 1); break; } @@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev) if (netif_running(dev)) { ne_reset_8390(dev); - NS8390_init(dev, 1); + NS8390p_init(dev, 1); netif_device_attach(dev); } return 0; diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 8ee7d7bb951b..e4765b713aba 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class) *class = CLASS_CODE_SCTP_IPV6; break; default: - return -1; + return 0; } return 1; diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 6b2dee0cf3a9..a834b52a6a2c 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index, index_specified; int ret = 0; @@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev, { struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; - unsigned int irqflag; + unsigned long irqflag; unsigned int key_index, index_specified; int ret = 0; @@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; __u16 alg; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; @@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; int max_key_len; @@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); unsigned int len; - unsigned int irqflag; + unsigned long irqflag; int ret = 0; pr_debug("%s:<- len=%d\n", __func__, data->data.length); @@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); char *p; - unsigned int irqflag; + unsigned long irqflag; unsigned int i; pr_debug("%s:<-\n", __func__); diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 86d77d05190a..a2b073097e5c 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3143,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data) pkt_cnt++; /* Updating the statistics block */ - nic->stats.tx_bytes += skb->len; + nic->dev->stats.tx_bytes += skb->len; nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb_irq(skb); @@ -4896,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) /* Configure Stats for immediate updt */ s2io_updt_stats(sp); + /* Using sp->stats as a staging area, because reset (due to mtu + change, for example) will clear some hardware counters */ + dev->stats.tx_packets += + le32_to_cpu(mac_control->stats_info->tmac_frms) - + sp->stats.tx_packets; sp->stats.tx_packets = le32_to_cpu(mac_control->stats_info->tmac_frms); + dev->stats.tx_errors += + le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) - + sp->stats.tx_errors; sp->stats.tx_errors = le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); + dev->stats.rx_errors += + le64_to_cpu(mac_control->stats_info->rmac_drop_frms) - + sp->stats.rx_errors; sp->stats.rx_errors = le64_to_cpu(mac_control->stats_info->rmac_drop_frms); + dev->stats.multicast = + le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - + sp->stats.multicast; sp->stats.multicast = le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); + dev->stats.rx_length_errors = + le64_to_cpu(mac_control->stats_info->rmac_long_frms) - + sp->stats.rx_length_errors; sp->stats.rx_length_errors = le64_to_cpu(mac_control->stats_info->rmac_long_frms); /* collect per-ring rx_packets and rx_bytes */ - sp->stats.rx_packets = sp->stats.rx_bytes = 0; + dev->stats.rx_packets = dev->stats.rx_bytes = 0; for (i = 0; i < config->rx_ring_num; i++) { - sp->stats.rx_packets += mac_control->rings[i].rx_packets; - sp->stats.rx_bytes += mac_control->rings[i].rx_bytes; + dev->stats.rx_packets += mac_control->rings[i].rx_packets; + dev->stats.rx_bytes += mac_control->rings[i].rx_bytes; } - return (&sp->stats); + return (&dev->stats); } /** @@ -7419,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) if (err_mask != 0x5) { DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", dev->name, err_mask); - sp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb(skb); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index c69ba1395fa9..6a06b9503e4f 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1,7 +1,7 @@ /* * SuperH Ethernet device driver * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * Copyright (C) 2006-2008 Nobuhiro Iwamatsu * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify it @@ -143,13 +143,39 @@ static struct mdiobb_ops bb_ops = { .get_mdio_data = sh_get_mdio, }; +/* Chip Reset */ static void sh_eth_reset(struct net_device *ndev) { u32 ioaddr = ndev->base_addr; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + int cnt = 100; + + ctrl_outl(EDSR_ENALL, ioaddr + EDSR); + ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); + while (cnt > 0) { + if (!(ctrl_inl(ioaddr + EDMR) & 0x3)) + break; + mdelay(1); + cnt--; + } + if (cnt < 0) + printk(KERN_ERR "Device reset fail\n"); + + /* Table Init */ + ctrl_outl(0x0, ioaddr + TDLAR); + ctrl_outl(0x0, ioaddr + TDFAR); + ctrl_outl(0x0, ioaddr + TDFXR); + ctrl_outl(0x0, ioaddr + TDFFR); + ctrl_outl(0x0, ioaddr + RDLAR); + ctrl_outl(0x0, ioaddr + RDFAR); + ctrl_outl(0x0, ioaddr + RDFXR); + ctrl_outl(0x0, ioaddr + RDFFR); +#else ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); mdelay(3); ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR); +#endif } /* free skb and descriptor buffer */ @@ -180,6 +206,7 @@ static void sh_eth_ring_free(struct net_device *ndev) /* format skb and descriptor buffer */ static void sh_eth_ring_format(struct net_device *ndev) { + u32 ioaddr = ndev->base_addr, reserve = 0; struct sh_eth_private *mdp = netdev_priv(ndev); int i; struct sk_buff *skb; @@ -201,9 +228,15 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->rx_skbuff[i] = skb; if (skb == NULL) break; - skb->dev = ndev; /* Mark as being used by this device. */ + skb->dev = ndev; /* Mark as being used by this device. */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); - +#endif /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; rxdesc->addr = (u32)skb->data & ~0x3UL; @@ -211,12 +244,25 @@ static void sh_eth_ring_format(struct net_device *ndev) /* The size of the buffer is 16 byte boundary. */ rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + /* Rx descriptor address set */ + if (i == 0) { + ctrl_outl((u32)rxdesc, ioaddr + RDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFXR); + ctrl_outl(0x1, ioaddr + RDFFR); +#endif + mdp->dirty_rx = (u32) (i - RX_RING_SIZE); /* Mark the last entry as wrapping the ring. */ - rxdesc->status |= cpu_to_le32(RC_RDEL); + rxdesc->status |= cpu_to_le32(RD_RDEL); memset(mdp->tx_ring, 0, tx_ringsize); @@ -226,8 +272,21 @@ static void sh_eth_ring_format(struct net_device *ndev) txdesc = &mdp->tx_ring[i]; txdesc->status = cpu_to_le32(TD_TFP); txdesc->buffer_length = 0; + if (i == 0) { + /* Rx descriptor address set */ + ctrl_outl((u32)txdesc, ioaddr + TDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFXR); + ctrl_outl(0x1, ioaddr + TDFFR); +#endif + txdesc->status |= cpu_to_le32(TD_TDLE); } @@ -311,31 +370,43 @@ static int sh_eth_dev_init(struct net_device *ndev) /* Soft Reset */ sh_eth_reset(ndev); - ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR); /* SH7712-DMA-RX-PAD2 */ + /* Descriptor format */ + sh_eth_ring_format(ndev); + ctrl_outl(RPADIR_INIT, ioaddr + RPADIR); /* all sh_eth int mask */ ctrl_outl(0, ioaddr + EESIPR); - /* FIFO size set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(EDMR_EL, ioaddr + EDMR); +#else ctrl_outl(0, ioaddr + EDMR); /* Endian change */ +#endif + /* FIFO size set */ ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR); ctrl_outl(0, ioaddr + TFTR); + /* Frame recv control */ ctrl_outl(0, ioaddr + RMCR); rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5; tx_int_var = mdp->tx_int_var = DESC_I_TINT2; ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + /* Burst sycle set */ + ctrl_outl(0x800, ioaddr + BCULR); +#endif + ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR); - ctrl_outl(0, ioaddr + TRIMD); - /* Descriptor format */ - sh_eth_ring_format(ndev); +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TRIMD); +#endif - ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR); - ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR); + /* Recv frame limit set register */ + ctrl_outl(RFLR_VALUE, ioaddr + RFLR); ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR); ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR); @@ -345,21 +416,26 @@ static int sh_eth_dev_init(struct net_device *ndev) ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE; ctrl_outl(val, ioaddr + ECMR); - ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | - ECSIPR_MPDIP, ioaddr + ECSR); - ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | - ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR); + + /* E-MAC Status Register clear */ + ctrl_outl(ECSR_INIT, ioaddr + ECSR); + + /* E-MAC Interrupt Enable register */ + ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR); /* Set MAC address */ update_mac_address(ndev); /* mask reset */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl(APR_AP, ioaddr + APR); ctrl_outl(MPR_MP, ioaddr + MPR); ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER); +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR); #endif + /* Setting the Rx mode will start the Rx process. */ ctrl_outl(EDRRR_R, ioaddr + EDRRR); @@ -407,7 +483,7 @@ static int sh_eth_rx(struct net_device *ndev) int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx; struct sk_buff *skb; u16 pkt_len = 0; - u32 desc_status; + u32 desc_status, reserve = 0; rxdesc = &mdp->rx_ring[entry]; while (!(rxdesc->status & cpu_to_le32(RD_RACT))) { @@ -454,28 +530,38 @@ static int sh_eth_rx(struct net_device *ndev) for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) { entry = mdp->dirty_rx % RX_RING_SIZE; rxdesc = &mdp->rx_ring[entry]; + /* The size of the buffer is 16 byte boundary. */ + rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + if (mdp->rx_skbuff[entry] == NULL) { skb = dev_alloc_skb(mdp->rx_buf_sz); mdp->rx_skbuff[entry] = skb; if (skb == NULL) break; /* Better luck next round. */ skb->dev = ndev; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); +#endif + skb->ip_summed = CHECKSUM_NONE; rxdesc->addr = (u32)skb->data & ~0x3UL; } - /* The size of the buffer is 16 byte boundary. */ - rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; if (entry >= RX_RING_SIZE - 1) rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL); + cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL); else rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP); + cpu_to_le32(RD_RACT | RD_RFP); } /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ - ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); + if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R)) + ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); return 0; } @@ -529,13 +615,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) printk(KERN_ERR "Receive Frame Overflow\n"); } } - +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) if (intr_status & EESR_ADE) { if (intr_status & EESR_TDE) { if (intr_status & EESR_TFE) mdp->stats.tx_fifo_errors++; } } +#endif if (intr_status & EESR_RDE) { /* Receive Descriptor Empty int */ @@ -550,8 +637,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) mdp->stats.rx_fifo_errors++; printk(KERN_ERR "Receive FIFO Overflow\n"); } - if (intr_status & - (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) { + if (intr_status & (EESR_TWB | EESR_TABT | +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + EESR_ADE | +#endif + EESR_TDE | EESR_TFE)) { /* Tx error */ u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR); /* dmesg */ @@ -582,17 +672,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) ioaddr = ndev->base_addr; spin_lock(&mdp->lock); + /* Get interrpt stat */ intr_status = ctrl_inl(ioaddr + EESR); /* Clear interrupt */ ctrl_outl(intr_status, ioaddr + EESR); - if (intr_status & (EESR_FRC | EESR_RINT8 | - EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 | - EESR_RINT1)) + if (intr_status & (EESR_FRC | /* Frame recv*/ + EESR_RMAF | /* Multi cast address recv*/ + EESR_RRF | /* Bit frame recv */ + EESR_RTLF | /* Long frame recv*/ + EESR_RTSF | /* short frame recv */ + EESR_PRE | /* PHY-LSI recv error */ + EESR_CERF)){ /* recv frame CRC error */ sh_eth_rx(ndev); - if (intr_status & (EESR_FTC | - EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) { + } + /* Tx Check */ + if (intr_status & TX_CHECK) { sh_eth_txfree(ndev); netif_wake_queue(ndev); } @@ -631,11 +727,32 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + if (mdp->duplex) { /* FULL */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, + ioaddr + ECMR); + } else { /* Half */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, + ioaddr + ECMR); + } +#endif } if (phydev->speed != mdp->speed) { new_state = 1; mdp->speed = phydev->speed; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + switch (mdp->speed) { + case 10: /* 10BASE */ + ctrl_outl(GECMR_10, ioaddr + GECMR); break; + case 100:/* 100BASE */ + ctrl_outl(GECMR_100, ioaddr + GECMR); break; + case 1000: /* 1000BASE */ + ctrl_outl(GECMR_1000, ioaddr + GECMR); break; + default: + break; + } +#endif } if (mdp->link == PHY_DOWN) { ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF) @@ -730,7 +847,7 @@ static int sh_eth_open(struct net_device *ndev) /* Set the timer to check for link beat. */ init_timer(&mdp->timer); mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */ - setup_timer(&mdp->timer, sh_eth_timer, ndev); + setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev); return ret; @@ -820,7 +937,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) mdp->cur_tx++; - ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS)) + ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + ndev->trans_start = jiffies; return 0; @@ -877,9 +996,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev) ctrl_outl(0, ioaddr + CDCR); /* (write clear) */ mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR); ctrl_outl(0, ioaddr + LCCR); /* (write clear) */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */ + ctrl_outl(0, ioaddr + CERCR); /* (write clear) */ + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */ + ctrl_outl(0, ioaddr + CEECR); /* (write clear) */ +#else mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR); ctrl_outl(0, ioaddr + CNDCR); /* (write clear) */ - +#endif return &mdp->stats; } @@ -929,8 +1054,13 @@ static void sh_eth_tsu_init(u32 ioaddr) ctrl_outl(0, ioaddr + TSU_FWSL0); ctrl_outl(0, ioaddr + TSU_FWSL1); ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TSU_QTAG0); /* Disable QTAG(0->1) */ + ctrl_outl(0, ioaddr + TSU_QTAG1); /* Disable QTAG(1->0) */ +#else ctrl_outl(0, ioaddr + TSU_QTAGM0); /* Disable QTAG(0->1) */ ctrl_outl(0, ioaddr + TSU_QTAGM1); /* Disable QTAG(1->0) */ +#endif ctrl_outl(0, ioaddr + TSU_FWSR); /* all interrupt status clear */ ctrl_outl(0, ioaddr + TSU_FWINMK); /* Disable all interrupt */ ctrl_outl(0, ioaddr + TSU_TEN); /* Disable all CAM entry */ @@ -1088,7 +1218,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* First device only init */ if (!devno) { /* reset device */ - ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR); + ctrl_outl(ARSTR_ARSTR, ARSTR); mdelay(1); /* TSU init (Init only)*/ @@ -1110,8 +1240,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->name, CARDNAME, (u32) ndev->base_addr); for (i = 0; i < 5; i++) - printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]); - printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); + printk(KERN_INFO "%02X:", ndev->dev_addr[i]); + printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index e01e1c347715..45ad1b09ca5a 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -32,118 +32,249 @@ #define CARDNAME "sh-eth" #define TX_TIMEOUT (5*HZ) - -#define TX_RING_SIZE 128 /* Tx ring size */ -#define RX_RING_SIZE 128 /* Rx ring size */ -#define RX_OFFSET 2 /* skb offset */ +#define TX_RING_SIZE 64 /* Tx ring size */ +#define RX_RING_SIZE 64 /* Rx ring size */ #define ETHERSMALL 60 #define PKT_BUF_SZ 1538 +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + +#define SH7763_SKB_ALIGN 32 /* Chip Base Address */ -#define SH_TSU_ADDR 0xA7000804 +# define SH_TSU_ADDR 0xFFE01800 +# define ARSTR 0xFFE01800 + +/* Chip Registers */ +/* E-DMAC */ +# define EDSR 0x000 +# define EDMR 0x400 +# define EDTRR 0x408 +# define EDRRR 0x410 +# define EESR 0x428 +# define EESIPR 0x430 +# define TDLAR 0x010 +# define TDFAR 0x014 +# define TDFXR 0x018 +# define TDFFR 0x01C +# define RDLAR 0x030 +# define RDFAR 0x034 +# define RDFXR 0x038 +# define RDFFR 0x03C +# define TRSCER 0x438 +# define RMFCR 0x440 +# define TFTR 0x448 +# define FDR 0x450 +# define RMCR 0x458 +# define RPADIR 0x460 +# define FCFTR 0x468 + +/* Ether Register */ +# define ECMR 0x500 +# define ECSR 0x510 +# define ECSIPR 0x518 +# define PIR 0x520 +# define PSR 0x528 +# define PIPR 0x52C +# define RFLR 0x508 +# define APR 0x554 +# define MPR 0x558 +# define PFTCR 0x55C +# define PFRCR 0x560 +# define TPAUSER 0x564 +# define GECMR 0x5B0 +# define BCULR 0x5B4 +# define MAHR 0x5C0 +# define MALR 0x5C8 +# define TROCR 0x700 +# define CDCR 0x708 +# define LCCR 0x710 +# define CEFCR 0x740 +# define FRECR 0x748 +# define TSFRCR 0x750 +# define TLFRCR 0x758 +# define RFCR 0x760 +# define CERCR 0x768 +# define CEECR 0x770 +# define MAFCR 0x778 + +/* TSU Absolute Address */ +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x18 +# define TSU_BSYSL0 0x20 +# define TSU_BSYSL1 0x24 +# define TSU_PRISL0 0x28 +# define TSU_PRISL1 0x2C +# define TSU_FWSL0 0x30 +# define TSU_FWSL1 0x34 +# define TSU_FWSLC 0x38 +# define TSU_QTAG0 0x40 +# define TSU_QTAG1 0x44 +# define TSU_FWSR 0x50 +# define TSU_FWINMK 0x54 +# define TSU_ADQT0 0x48 +# define TSU_ADQT1 0x4C +# define TSU_VTAG0 0x58 +# define TSU_VTAG1 0x5C +# define TSU_ADSBSY 0x60 +# define TSU_TEN 0x64 +# define TSU_POST1 0x70 +# define TSU_POST2 0x74 +# define TSU_POST3 0x78 +# define TSU_POST4 0x7C +# define TSU_ADRH0 0x100 +# define TSU_ADRL0 0x104 +# define TSU_ADRH31 0x1F8 +# define TSU_ADRL31 0x1FC + +# define TXNLCR0 0x80 +# define TXALCR0 0x84 +# define RXNLCR0 0x88 +# define RXALCR0 0x8C +# define FWNLCR0 0x90 +# define FWALCR0 0x94 +# define TXNLCR1 0xA0 +# define TXALCR1 0xA4 +# define RXNLCR1 0xA8 +# define RXALCR1 0xAC +# define FWNLCR1 0xB0 +# define FWALCR1 0x40 + +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ +# define RX_OFFSET 2 /* skb offset */ +/* Chip base address */ +# define SH_TSU_ADDR 0xA7000804 +# define ARSTR 0xA7000800 /* Chip Registers */ /* E-DMAC */ -#define EDMR 0x0000 -#define EDTRR 0x0004 -#define EDRRR 0x0008 -#define TDLAR 0x000C -#define RDLAR 0x0010 -#define EESR 0x0014 -#define EESIPR 0x0018 -#define TRSCER 0x001C -#define RMFCR 0x0020 -#define TFTR 0x0024 -#define FDR 0x0028 -#define RMCR 0x002C -#define EDOCR 0x0030 -#define FCFTR 0x0034 -#define RPADIR 0x0038 -#define TRIMD 0x003C -#define RBWAR 0x0040 -#define RDFAR 0x0044 -#define TBRAR 0x004C -#define TDFAR 0x0050 +# define EDMR 0x0000 +# define EDTRR 0x0004 +# define EDRRR 0x0008 +# define TDLAR 0x000C +# define RDLAR 0x0010 +# define EESR 0x0014 +# define EESIPR 0x0018 +# define TRSCER 0x001C +# define RMFCR 0x0020 +# define TFTR 0x0024 +# define FDR 0x0028 +# define RMCR 0x002C +# define EDOCR 0x0030 +# define FCFTR 0x0034 +# define RPADIR 0x0038 +# define TRIMD 0x003C +# define RBWAR 0x0040 +# define RDFAR 0x0044 +# define TBRAR 0x004C +# define TDFAR 0x0050 + /* Ether Register */ -#define ECMR 0x0160 -#define ECSR 0x0164 -#define ECSIPR 0x0168 -#define PIR 0x016C -#define MAHR 0x0170 -#define MALR 0x0174 -#define RFLR 0x0178 -#define PSR 0x017C -#define TROCR 0x0180 -#define CDCR 0x0184 -#define LCCR 0x0188 -#define CNDCR 0x018C -#define CEFCR 0x0194 -#define FRECR 0x0198 -#define TSFRCR 0x019C -#define TLFRCR 0x01A0 -#define RFCR 0x01A4 -#define MAFCR 0x01A8 -#define IPGR 0x01B4 -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -#define APR 0x01B8 -#define MPR 0x01BC -#define TPAUSER 0x1C4 -#define BCFR 0x1CC -#endif /* CONFIG_CPU_SH7710 */ - -#define ARSTR 0x0800 +# define ECMR 0x0160 +# define ECSR 0x0164 +# define ECSIPR 0x0168 +# define PIR 0x016C +# define MAHR 0x0170 +# define MALR 0x0174 +# define RFLR 0x0178 +# define PSR 0x017C +# define TROCR 0x0180 +# define CDCR 0x0184 +# define LCCR 0x0188 +# define CNDCR 0x018C +# define CEFCR 0x0194 +# define FRECR 0x0198 +# define TSFRCR 0x019C +# define TLFRCR 0x01A0 +# define RFCR 0x01A4 +# define MAFCR 0x01A8 +# define IPGR 0x01B4 +# if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define APR 0x01B8 +# define MPR 0x01BC +# define TPAUSER 0x1C4 +# define BCFR 0x1CC +# endif /* CONFIG_CPU_SH7710 */ /* TSU */ -#define TSU_CTRST 0x004 -#define TSU_FWEN0 0x010 -#define TSU_FWEN1 0x014 -#define TSU_FCM 0x018 -#define TSU_BSYSL0 0x020 -#define TSU_BSYSL1 0x024 -#define TSU_PRISL0 0x028 -#define TSU_PRISL1 0x02C -#define TSU_FWSL0 0x030 -#define TSU_FWSL1 0x034 -#define TSU_FWSLC 0x038 -#define TSU_QTAGM0 0x040 -#define TSU_QTAGM1 0x044 -#define TSU_ADQT0 0x048 -#define TSU_ADQT1 0x04C -#define TSU_FWSR 0x050 -#define TSU_FWINMK 0x054 -#define TSU_ADSBSY 0x060 -#define TSU_TEN 0x064 -#define TSU_POST1 0x070 -#define TSU_POST2 0x074 -#define TSU_POST3 0x078 -#define TSU_POST4 0x07C -#define TXNLCR0 0x080 -#define TXALCR0 0x084 -#define RXNLCR0 0x088 -#define RXALCR0 0x08C -#define FWNLCR0 0x090 -#define FWALCR0 0x094 -#define TXNLCR1 0x0A0 -#define TXALCR1 0x0A4 -#define RXNLCR1 0x0A8 -#define RXALCR1 0x0AC -#define FWNLCR1 0x0B0 -#define FWALCR1 0x0B4 +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x018 +# define TSU_BSYSL0 0x020 +# define TSU_BSYSL1 0x024 +# define TSU_PRISL0 0x028 +# define TSU_PRISL1 0x02C +# define TSU_FWSL0 0x030 +# define TSU_FWSL1 0x034 +# define TSU_FWSLC 0x038 +# define TSU_QTAGM0 0x040 +# define TSU_QTAGM1 0x044 +# define TSU_ADQT0 0x048 +# define TSU_ADQT1 0x04C +# define TSU_FWSR 0x050 +# define TSU_FWINMK 0x054 +# define TSU_ADSBSY 0x060 +# define TSU_TEN 0x064 +# define TSU_POST1 0x070 +# define TSU_POST2 0x074 +# define TSU_POST3 0x078 +# define TSU_POST4 0x07C +# define TXNLCR0 0x080 +# define TXALCR0 0x084 +# define RXNLCR0 0x088 +# define RXALCR0 0x08C +# define FWNLCR0 0x090 +# define FWALCR0 0x094 +# define TXNLCR1 0x0A0 +# define TXALCR1 0x0A4 +# define RXNLCR1 0x0A8 +# define RXALCR1 0x0AC +# define FWNLCR1 0x0B0 +# define FWALCR1 0x0B4 #define TSU_ADRH0 0x0100 #define TSU_ADRL0 0x0104 #define TSU_ADRL31 0x01FC -/* Register's bits */ +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ + +/* + * Register's bits + */ +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* EDSR */ +enum EDSR_BIT { + EDSR_ENT = 0x01, EDSR_ENR = 0x02, +}; +#define EDSR_ENALL (EDSR_ENT|EDSR_ENR) + +/* GECMR */ +enum GECMR_BIT { + GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01, +}; +#endif /* EDMR */ enum DMAC_M_BIT { - EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01, + EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDMR_SRST = 0x03, + EMDR_DESC_R = 0x30, /* Descriptor reserve size */ + EDMR_EL = 0x40, /* Litte endian */ +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ + EDMR_SRST = 0x01, +#endif }; /* EDTRR */ enum DMAC_T_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDTRR_TRNS = 0x03, +#else EDTRR_TRNS = 0x01, +#endif }; /* EDRRR*/ @@ -173,21 +304,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, }; /* EESR */ enum EESR_BIT { - EESR_TWB = 0x40000000, EESR_TABT = 0x04000000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_TWB = 0x40000000, +#else + EESR_TWB = 0xC0000000, + EESR_TC1 = 0x20000000, + EESR_TUC = 0x10000000, + EESR_ROC = 0x80000000, +#endif + EESR_TABT = 0x04000000, EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000, - EESR_ADE = 0x00800000, EESR_ECI = 0x00400000, - EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, - EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, - EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, - EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400, - EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100, - EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010, - EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004, - EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001, -}; - -#define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_ADE = 0x00800000, +#endif + EESR_ECI = 0x00400000, + EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, + EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, + EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_CND = 0x00000800, +#endif + EESR_DLC = 0x00000400, + EESR_CD = 0x00000200, EESR_RTO = 0x00000100, + EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040, + EESR_CELF = 0x00000020, EESR_RRF = 0x00000010, + EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004, + EESR_PRE = 0x00000002, EESR_CERF = 0x00000001, +}; + + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define TX_CHECK (EESR_TC1 | EESR_FTC) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ + | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE) + +#else +# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ | EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE) +#endif /* EESIPR */ enum DMAC_IM_BIT { @@ -207,8 +364,8 @@ enum DMAC_IM_BIT { /* Receive descriptor bit */ enum RD_STS_BIT { - RD_RACT = 0x80000000, RC_RDEL = 0x40000000, - RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000, + RD_RACT = 0x80000000, RD_RDEL = 0x40000000, + RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000, RD_RFE = 0x08000000, RD_RFS10 = 0x00000200, RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080, RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020, @@ -216,9 +373,9 @@ enum RD_STS_BIT { RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002, RD_RFS1 = 0x00000001, }; -#define RDF1ST RC_RFP1 -#define RDFEND RC_RFP0 -#define RD_RFP (RC_RFP1|RC_RFP0) +#define RDF1ST RD_RFP1 +#define RDFEND RD_RFP0 +#define RD_RFP (RD_RFP1|RD_RFP0) /* FCFTR */ enum FCFTR_BIT { @@ -231,7 +388,8 @@ enum FCFTR_BIT { /* Transfer descriptor bit */ enum TD_STS_BIT { - TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, + TD_TACT = 0x80000000, + TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, TD_TFP0 = 0x10000000, }; #define TDF1ST TD_TFP1 @@ -242,6 +400,10 @@ enum TD_STS_BIT { enum RECV_RST_BIT { RMCR_RST = 0x01, }; /* ECMR */ enum FELIC_MODE_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000, + ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000, +#endif ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000, ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000, ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020, @@ -249,18 +411,45 @@ enum FELIC_MODE_BIT { ECMR_PRM = 0x00000001, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\ + ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) +#else +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT) +#endif + /* ECSR */ enum ECSR_STATUS_BIT { - ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, +#endif + ECSR_LCHNG = 0x04, ECSR_MPD = 0x02, ECSR_ICD = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP) +#else +# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \ + ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP) +#endif + /* ECSIPR */ enum ECSIPR_STATUS_MASK_BIT { - ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, +#endif + ECSIPR_LCHNGIP = 0x04, ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP) +#else +# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \ + ECSIPR_ICDIP | ECSIPR_MPDIP) +#endif + /* APR */ enum APR_BIT { APR_AP = 0x00000001, @@ -285,6 +474,15 @@ enum RPADIR_BIT { RPADIR_PADR = 0x0003f, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) +# define RPADIR_INIT (0x00) +#else +# define RPADIR_INIT (RPADIR_PADS1) +#endif + +/* RFLR */ +#define RFLR_VALUE 0x1000 + /* FDR */ enum FIFO_SIZE_BIT { FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007, @@ -316,7 +514,7 @@ enum PHY_ANA_BIT { PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000, PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100, PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020, - PHY_A_SEL = 0x001f, + PHY_A_SEL = 0x001e, }; /* PHY_ANL */ enum PHY_ANL_BIT { @@ -449,6 +647,10 @@ struct sh_eth_private { struct net_device_stats tsu_stats; /* TSU forward status */ }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* SH7763 has endian control register */ +#define swaps(x, y) +#else static void swaps(char *src, int len) { #ifdef __LITTLE_ENDIAN__ @@ -460,5 +662,5 @@ static void swaps(char *src, int len) *p = swab32(*p); #endif } - +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ #endif diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c index ffbfb1b79f97..805383b33d3c 100644 --- a/drivers/net/skfp/smt.c +++ b/drivers/net/skfp/smt.c @@ -19,6 +19,7 @@ #include "h/smc.h" #include "h/smt_p.h" #include <linux/bitrev.h> +#include <linux/kernel.h> #define KERNEL #include "h/smtstate.h" @@ -1730,20 +1731,18 @@ void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest) #endif #ifdef DEBUG -#define hextoasc(x) "0123456789abcdef"[x] - char *addr_to_string(struct fddi_addr *addr) { int i ; static char string[6*3] = "****" ; for (i = 0 ; i < 6 ; i++) { - string[i*3] = hextoasc((addr->a[i]>>4)&0xf) ; - string[i*3+1] = hextoasc((addr->a[i])&0xf) ; - string[i*3+2] = ':' ; + string[i * 3] = hex_asc_hi(addr->a[i]); + string[i * 3 + 1] = hex_asc_lo(addr->a[i]); + string[i * 3 + 2] = ':'; } - string[5*3+2] = 0 ; - return(string) ; + string[5 * 3 + 2] = 0; + return(string); } #endif diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 633c128a6228..26aa37aa531f 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1982,8 +1982,6 @@ static void tg3_power_down_phy(struct tg3 *tp) static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) { u32 misc_host_ctrl; - u16 power_control, power_caps; - int pm = tp->pm_cap; /* Make sure register accesses (indirect or otherwise) * will function correctly. @@ -1992,18 +1990,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl); - pci_read_config_word(tp->pdev, - pm + PCI_PM_CTRL, - &power_control); - power_control |= PCI_PM_CTRL_PME_STATUS; - power_control &= ~(PCI_PM_CTRL_STATE_MASK); switch (state) { case PCI_D0: - power_control |= 0; - pci_write_config_word(tp->pdev, - pm + PCI_PM_CTRL, - power_control); - udelay(100); /* Delay after power state change */ + pci_enable_wake(tp->pdev, state, false); + pci_set_power_state(tp->pdev, PCI_D0); /* Switch out of Vaux if it is a NIC */ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC) @@ -2012,26 +2002,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) return 0; case PCI_D1: - power_control |= 1; - break; - case PCI_D2: - power_control |= 2; - break; - case PCI_D3hot: - power_control |= 3; break; default: - printk(KERN_WARNING PFX "%s: Invalid power state (%d) " - "requested.\n", - tp->dev->name, state); + printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n", + tp->dev->name, state); return -EINVAL; } - - power_control |= PCI_PM_CTRL_PME_ENABLE; - misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL); tw32(TG3PCI_MISC_HOST_CTRL, misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT); @@ -2109,8 +2088,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) WOL_DRV_WOL | WOL_SET_MAGIC_PKT); - pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps); - if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) { u32 mac_mode; @@ -2143,8 +2120,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS)) tw32(MAC_LED_CTRL, tp->led_ctrl); - if (((power_caps & PCI_PM_CAP_PME_D3cold) && - (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))) + if (pci_pme_capable(tp->pdev, state) && + (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE; tw32_f(MAC_MODE, mac_mode); @@ -2236,9 +2213,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) + pci_enable_wake(tp->pdev, state, true); + /* Finally, set the new power state. */ - pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control); - udelay(100); /* Delay after power state change */ + pci_set_power_state(tp->pdev, state); return 0; } @@ -9065,7 +9044,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct tg3 *tp = netdev_priv(dev); - if (tp->tg3_flags & TG3_FLAG_WOL_CAP) + if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) && + device_can_wakeup(&tp->pdev->dev)) wol->supported = WAKE_MAGIC; else wol->supported = 0; @@ -9078,18 +9058,22 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct tg3 *tp = netdev_priv(dev); + struct device *dp = &tp->pdev->dev; if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; if ((wol->wolopts & WAKE_MAGIC) && - !(tp->tg3_flags & TG3_FLAG_WOL_CAP)) + !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp))) return -EINVAL; spin_lock_bh(&tp->lock); - if (wol->wolopts & WAKE_MAGIC) + if (wol->wolopts & WAKE_MAGIC) { tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; - else + device_set_wakeup_enable(dp, true); + } else { tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE; + device_set_wakeup_enable(dp, false); + } spin_unlock_bh(&tp->lock); return 0; @@ -11296,7 +11280,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) if (val & VCPU_CFGSHDW_ASPM_DBNC) tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND; if ((val & VCPU_CFGSHDW_WOL_ENABLE) && - (val & VCPU_CFGSHDW_WOL_MAGPKT)) + (val & VCPU_CFGSHDW_WOL_MAGPKT) && + device_may_wakeup(&tp->pdev->dev)) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; return; } @@ -11426,8 +11411,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)) tp->tg3_flags &= ~TG3_FLAG_WOL_CAP; - if (tp->tg3_flags & TG3_FLAG_WOL_CAP && - nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) + if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) && + (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) && + device_may_wakeup(&tp->pdev->dev)) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; if (cfg2 & (1 << 17)) @@ -13613,6 +13599,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); struct tg3 *tp = netdev_priv(dev); + pci_power_t target_state; int err; /* PCI register 4 needs to be saved whether netif_running() or not. @@ -13641,7 +13628,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_full_unlock(tp); - err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); + target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot; + + err = tg3_set_power_state(tp, target_state); if (err) { int err2; diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index f7319d326912..78df2be8a728 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -55,12 +55,28 @@ static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf; + int err = -ENOMEM; + devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - DM_READ_REGS, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + DM_READ_REGS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + if (err == length) + memcpy(data, buf, length); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + + out: + return err; } static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) @@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf = NULL; + int err = -ENOMEM; + devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), - DM_WRITE_REGS, - USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + if (data) { + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + memcpy(buf, data, length); + } + + err = usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + DM_WRITE_REGS, + USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + kfree(buf); + if (err >= 0 && err < length) + err = -EINVAL; + out: + return err; } static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) diff --git a/drivers/net/wd.c b/drivers/net/wd.c index fa14255282af..6f9aa1643743 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = ei_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index d9769c527346..ff3fad794b61 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -43,7 +43,9 @@ #include <linux/version.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/hardirq.h> #include <linux/if.h> +#include <linux/io.h> #include <linux/netdevice.h> #include <linux/cache.h> #include <linux/pci.h> @@ -471,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev, /* Set private data */ pci_set_drvdata(pdev, hw); - /* Enable msi for devices that support it */ - pci_enable_msi(pdev); - /* Setup interrupt handler */ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); if (ret) { @@ -551,7 +550,6 @@ err_ah: err_irq: free_irq(pdev->irq, sc); err_free: - pci_disable_msi(pdev); ieee80211_free_hw(hw); err_map: pci_iounmap(pdev, mem); @@ -573,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev) ath5k_detach(pdev, hw); ath5k_hw_detach(sc->ah); free_irq(pdev->irq, sc); - pci_disable_msi(pdev); pci_iounmap(pdev, sc->iobase); pci_release_region(pdev, 0); pci_disable_device(pdev); @@ -590,6 +587,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath5k_led_off(sc); ath5k_stop_hw(sc); + + free_irq(pdev->irq, sc); + pci_disable_msi(pdev); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -605,15 +605,12 @@ ath5k_pci_resume(struct pci_dev *pdev) struct ath5k_hw *ah = sc->ah; int i, err; - err = pci_set_power_state(pdev, PCI_D0); - if (err) - return err; + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) return err; - pci_restore_state(pdev); /* * Suspend/Resume resets the PCI configuration space, so we have to * re-disable the RETRY_TIMEOUT register (0x41) to keep @@ -621,7 +618,17 @@ ath5k_pci_resume(struct pci_dev *pdev) */ pci_write_config_byte(pdev, 0x41, 0); - ath5k_init(sc); + pci_enable_msi(pdev); + + err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (err) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_msi; + } + + err = ath5k_init(sc); + if (err) + goto err_irq; ath5k_led_enable(sc); /* @@ -635,6 +642,12 @@ ath5k_pci_resume(struct pci_dev *pdev) ath5k_hw_reset_key(ah, i); return 0; +err_irq: + free_irq(pdev->irq, sc); +err_msi: + pci_disable_msi(pdev); + pci_disable_device(pdev); + return err; } #endif /* CONFIG_PM */ @@ -1224,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) pktlen = skb->len; - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) { + if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; pktlen += info->control.icv_len; } @@ -1249,6 +1262,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) txq->link = &ds->ds_link; ath5k_hw_tx_start(ah, txq->qnum); + mmiowb(); spin_unlock_bh(&txq->lock); return 0; @@ -1583,7 +1597,6 @@ ath5k_rx_stop(struct ath5k_softc *sc) ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ - mdelay(3); /* 3ms is long enough for 1 frame */ ath5k_debug_printrxbuffs(sc, ah); @@ -1682,31 +1695,44 @@ ath5k_tasklet_rx(unsigned long data) struct ath5k_rx_status rs = {}; struct sk_buff *skb; struct ath5k_softc *sc = (void *)data; - struct ath5k_buf *bf; + struct ath5k_buf *bf, *bf_last; struct ath5k_desc *ds; int ret; int hdrlen; int pad; spin_lock(&sc->rxbuflock); + if (list_empty(&sc->rxbuf)) { + ATH5K_WARN(sc, "empty rx buf pool\n"); + goto unlock; + } + bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); do { rxs.flag = 0; - if (unlikely(list_empty(&sc->rxbuf))) { - ATH5K_WARN(sc, "empty rx buf pool\n"); - break; - } bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); BUG_ON(bf->skb == NULL); skb = bf->skb; ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); - - if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */ - break; + /* + * last buffer must not be freed to ensure proper hardware + * function. When the hardware finishes also a packet next to + * it, we are sure, it doesn't use it anymore and we can go on. + */ + if (bf_last == bf) + bf->flags |= 1; + if (bf->flags) { + struct ath5k_buf *bf_next = list_entry(bf->list.next, + struct ath5k_buf, list); + ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, + &rs); + if (ret) + break; + bf->flags &= ~1; + /* skip the overwritten one (even status is martian) */ + goto next; + } ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); if (unlikely(ret == -EINPROGRESS)) @@ -1752,8 +1778,6 @@ ath5k_tasklet_rx(unsigned long data) goto next; } accept: - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, - rs.rs_datalen, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, PCI_DMA_FROMDEVICE); bf->skb = NULL; @@ -1816,6 +1840,7 @@ accept: next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); +unlock: spin_unlock(&sc->rxbuflock); } @@ -1840,9 +1865,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) list_for_each_entry_safe(bf, bf0, &txq->q, list) { ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); if (unlikely(ret == -EINPROGRESS)) break; @@ -2015,8 +2037,6 @@ ath5k_beacon_send(struct ath5k_softc *sc) ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); /* NB: hw still stops DMA, so proceed */ } - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len, - PCI_DMA_TODEVICE); ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); ath5k_hw_tx_start(ah, sc->bhalq); @@ -2240,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc) ret = 0; done: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -2272,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); + synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); if (!test_bit(ATH_STAT_INVALID, sc->status)) { @@ -2321,9 +2343,13 @@ ath5k_stop_hw(struct ath5k_softc *sc) } } ath5k_txbuf_free(sc, sc->bbuf); + mmiowb(); mutex_unlock(&sc->lock); del_timer_sync(&sc->calib_tim); + tasklet_kill(&sc->rxtq); + tasklet_kill(&sc->txtq); + tasklet_kill(&sc->restq); return ret; } @@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc) struct pci_dev *pdev = sc->pdev; char name[ATH5K_LED_MAX_NAME_LEN + 1]; - sc->led_on = 0; /* active low */ - /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. @@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc) pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 0; + sc->led_on = 0; /* active low */ } /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 1; + sc->led_on = 1; /* active high */ } if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) goto out; @@ -2783,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* XXX: assoc id is set to 0 for now, mac80211 doesn't have * a clean way of letting us retrieve this yet. */ ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + mmiowb(); } if (conf->changed & IEEE80211_IFCC_BEACON && @@ -2971,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } unlock: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -3032,8 +3060,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ath5k_debug_dump_skb(sc, skb, "BC ", 1); - mutex_lock(&sc->lock); - if (sc->opmode != IEEE80211_IF_TYPE_IBSS) { ret = -EIO; goto end; @@ -3044,11 +3070,12 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ret = ath5k_beacon_setup(sc, sc->bbuf); if (ret) sc->bbuf->skb = NULL; - else + else { ath5k_beacon_config(sc); + mmiowb(); + } end: - mutex_unlock(&sc->lock); return ret; } diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 47f414b09e67..d7e03e6b8271 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -56,7 +56,7 @@ struct ath5k_buf { struct list_head list; - unsigned int flags; /* tx descriptor flags */ + unsigned int flags; /* rx descriptor flags */ struct ath5k_desc *desc; /* virtual addr of desc */ dma_addr_t daddr; /* physical addr of desc */ struct sk_buff *skb; /* skbuff for buf */ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index c6d12c53bda4..7ca87a557312 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Stop queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* * Schedule TX disable and wait until queue is empty @@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Clear register */ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; } /* TODO: Check for success else return error */ @@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) /* ..re-enable interrupts */ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); return old_mask; } diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index e78319aa47c1..3bf3a869361f 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 8d54502222a6..9dda8169f7cc 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, const struct b43_phy *phy = &dev->phy; const struct ieee80211_hdr *wlhdr = (const struct ieee80211_hdr *)fragment_data; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; __le16 fctl = wlhdr->frame_control; struct ieee80211_rate *fbrate; u8 rate, rate_fb; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index a1b8bf3ee732..2541c81932f0 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; hw->queues = 1; /* FIXME: hardware has more queues */ @@ -3846,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev) goto out; } } - mutex_unlock(&wl->mutex); b43legacydbg(wl, "Device resumed.\n"); out: + mutex_unlock(&wl->mutex); return err; } diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index e969ed8d412d..68e1f8c78727 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, u16 cookie) { const struct ieee80211_hdr *wlhdr; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; u16 fctl; u8 rate; struct ieee80211_rate *rate_fb; diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 5bf9e00b070c..c6f886ec08a3 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev) if (err) { printk(KERN_ERR "%s: pci_enable_device failed on resume\n", dev->name); + mutex_unlock(&priv->action_mutex); return err; } pci_restore_state(pci_dev); @@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev, err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); if (err) { IPW_DEBUG_WX("failed querying ordinals.\n"); - return err; + goto done; } switch (val & TX_RATE_MASK) { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index c2a76785b665..a51e0eaa1334 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct ieee80211_rx_status *stats) { struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; +#ifdef CONFIG_IWL3945_LEDS struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); +#endif struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); short len = le16_to_cpu(rx_hdr->len); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a44188bf4459..e3427c205ccf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->rate_control_algorithm = "iwl-4965-rs"; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 58384805a494..d6d729e86bdb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv); #endif #else -static inline void IWL_DEBUG(int level, const char *fmt, ...) -{ -} -static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...) -{ -} +#define IWL_DEBUG(level, fmt, args...) +#define IWL_DEBUG_LIMIT(level, fmt, args...) #endif /* CONFIG_IWLWIFI_DEBUG */ diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 899d7a2567a8..61250e6a7d1b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) if (tpt < 0) /* wrapparound */ tpt = -tpt; - IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt); + IWL_DEBUG_LED("tpt %lld current_tpt %llu\n", + (long long)tpt, + (unsigned long long)current_tpt); priv->led_tpt = current_tpt; if (!priv->allow_blinking) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index efc750d2fc5c..5a00ac23e2d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv, static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { +#ifdef CONFIG_IWLWIFI_DEBUG struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; @@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, scan_notif->scanned_channels, scan_notif->tsf_low, scan_notif->tsf_high, scan_notif->status); +#endif /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 9b50b1052b09..f72cd0bf6aa3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) * first entry */ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4a22d3fba75b..7c82ecfa30a4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) * first entry */ iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0); /* Set up TFD's 2nd entry to point directly to remainder of skb, @@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->ibss_beacon = NULL; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* 4 EDCA QOS priorities */ diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c index 6d0ff8decaf7..3309a9c3cfef 100644 --- a/drivers/net/wireless/libertas/persistcfg.c +++ b/drivers/net/wireless/libertas/persistcfg.c @@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag)); + return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag)); } /** @@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 1)) return -EINVAL; *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum); @@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", defs.boottime); + return snprintf(buf, 12, "%d\n", defs.boottime); } /** @@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* A too small boot time will result in the device booting into @@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel)); + return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel)); } /** @@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr, { struct lbs_private *priv = to_net_dev(dev)->priv; struct cmd_ds_mesh_config cmd; - uint16_t datum; + uint32_t datum; int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%hx", &datum); + ret = sscanf(buf, "%d", &datum); if (ret != 1 || datum < 1 || datum > 11) return -EINVAL; @@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 5816230d58f8..248d31a7aa33 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -500,7 +500,7 @@ failed_hw: device_unregister(data->dev); failed_drvdata: ieee80211_free_hw(hw); - hwsim_radios[i] = 0; + hwsim_radios[i] = NULL; failed: mac80211_hwsim_free(); return err; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3558cb210747..3078417b326b 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 07b03b3c7ef1..db2dc976d831 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -108,7 +108,10 @@ #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) #define DIFS ( PIFS + SLOT_TIME ) #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define EIFS ( SIFS + DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define SHORT_EIFS ( SIFS + SHORT_DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* * Chipset identification @@ -597,6 +600,7 @@ enum rt2x00_flags { DEVICE_STARTED_SUSPEND, DEVICE_ENABLED_RADIO, DEVICE_DISABLED_RADIO_HW, + DEVICE_DIRTY_CONFIG, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index f20ca712504f..3f89516e8332 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -271,7 +271,7 @@ config: libconf.sifs = SIFS; libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = EIFS; + libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS; } libconf.conf = conf; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 8c93eb8353b0..f42283ad7b02 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_associated = 0; __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); return 0; } @@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); - if (!rt2x00dev->hw->conf.radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); + retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + if (retval) + goto exit; /* * Iterator over each active interface to diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index f2c9b0e79b5f..c5fb3a72cf37 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** - * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. - */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - -/** * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send * @skb: The skb to send diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index f1dcbaa80c3c..c3ee4ecba792 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; @@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, (struct ieee80211_rts *)(skb->data)); if (rt2x00queue_write_tx_frame(queue, skb)) { + dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } @@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; enum data_queue_qid qid = skb_get_queue_mapping(skb); - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct data_queue *queue; u16 frame_control; @@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } } - /* - * XXX: This is as wrong as the old mac80211 code was, - * due to beacons not getting sequence numbers assigned - * properly. - */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - intf->seqno += 0x10; - ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - } - if (rt2x00queue_write_tx_frame(queue, skb)) { ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; @@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; + int force_reconfig; /* * Mac80211 might be calling this function while we are trying @@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); } - rt2x00lib_config(rt2x00dev, conf, 0); + /* + * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently + * been started and the configuration must be forced upon the hardware. + * Otherwise registers will not be intialized correctly and could + * result in non-working hardware because essential registers aren't + * initialized. + */ + force_reconfig = + __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + + rt2x00lib_config(rt2x00dev, conf, force_reconfig); /* * Reenable RX only if the radio should be on. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7f442030f5ad..3b27f6aa860c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); @@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, } /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + spin_lock(&intf->lock); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock(&intf->lock); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + } + + /* * PLCP setup * Length calculation depends on OFDM/CCK rate. */ @@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_rxentry) return; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &queue->entries[i]); + } } void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) @@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_txentry) continue; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_txentry(rt2x00dev, &queue->entries[i]); + } } } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 8945945c892e..a4a8c57004db 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -199,6 +199,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. @@ -210,6 +211,7 @@ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, ENTRY_TXD_CTS_FRAME, ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_GENERATE_SEQ, ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, ENTRY_TXD_REQ_TIMESTAMP, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 83862e7f7aec..933e6cc9359d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout) +{ + int status = 0; + unsigned char *tb; + u16 off, len, bsize; + + mutex_lock(&rt2x00dev->usb_cache_mutex); + + tb = buffer; + off = offset; + len = buffer_length; + while (len && !status) { + bsize = min_t(u16, CSR_CACHE_SIZE, len); + status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, + requesttype, off, tb, + bsize, timeout); + + tb += bsize; + len -= bsize; + off += bsize; + } + + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index aad794adf52c..ee3875f894aa 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -70,8 +70,7 @@ /* * Cache size */ -#define CSR_CACHE_SIZE 8 -#define CSR_CACHE_SIZE_FIRMWARE 64 +#define CSR_CACHE_SIZE 64 /* * USB request types. @@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u16 buffer_length, const int timeout); /** + * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register start offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * This function is used to transfer register data in blocks larger + * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons. + */ +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout); + +/** * rt2x00usb_vendor_request_sw - Send single register command to device * @rt2x00dev: Pointer to &struct rt2x00_dev * @request: USB vendor command (See &enum rt2x00usb_vendor_request) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f7c1f92c1448..fbe2a652e014 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); @@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index d383735ab8f2..9761eaaa08be 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, unsigned int i; int status; u32 reg; - const char *ptr = data; - char *cache; - int buflen; /* * Wait for stable hardware. @@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, /* * Write firmware to device. - * We setup a seperate cache for this action, - * since we are going to write larger chunks of data - * then normally used cache size. */ - cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); - if (!cache) { - ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); - return -ENOMEM; - } - - for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { - buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - - memcpy(cache, ptr, buflen); - - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, - REGISTER_TIMEOUT32(buflen)); - - ptr += buflen; - } - - kfree(cache); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, + data, len, + REGISTER_TIMEOUT32(len)); /* * Send firmware request to device to load firmware, @@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, 0, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); /* * Clean up the beacon skb. @@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 3afb49f8866a..1b0d750f6623 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -47,11 +47,13 @@ struct rtl8187_rx_hdr { struct rtl8187b_rx_hdr { __le32 flags; __le64 mac_time; - u8 noise; - u8 signal; + u8 sq; + u8 rssi; u8 agc; - u8 reserved; - __le32 unused; + u8 flags2; + __le16 snr_long2end; + s8 pwdb_g12; + u8 fot; } __attribute__((packed)); /* {rtl8187,rtl8187b}_tx_info is in skb */ @@ -100,6 +102,7 @@ struct rtl8187_priv { struct usb_device *udev; u32 rx_conf; u16 txpwr_base; + u16 seqno; u8 asic_rev; u8 is_rtl8187b; enum { diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index d3067b1216ca..177988efd660 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { struct rtl8187_priv *priv = dev->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; unsigned int ep; void *buf; struct urb *urb; @@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) ep = epmap[skb_get_queue_mapping(skb)]; } + /* FIXME: The sequence that follows is needed for this driver to + * work with mac80211 since "mac80211: fix TX sequence numbers". + * As with the temporary code in rt2x00, changes will be needed + * to get proper sequence numbers on beacons. In addition, this + * patch places the sequence number in the hardware state, which + * limits us to a single virtual state. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + info->driver_data[0] = dev; info->driver_data[1] = urb; @@ -257,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb) struct ieee80211_rx_status rx_status = { 0 }; int rate, signal; u32 flags; + u32 quality; spin_lock(&priv->rx_queue.lock); if (skb->next) @@ -280,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb) flags = le32_to_cpu(hdr->flags); signal = hdr->signal & 0x7f; rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = signal; rx_status.noise = hdr->noise; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = signal; priv->quality = signal; + rx_status.qual = priv->quality; priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; + if (rate > 3) { /* OFDM rate */ + if (signal > 90) + signal = 90; + else if (signal < 25) + signal = 25; + signal = 90 - signal; + } else { /* CCK rate */ + if (signal > 95) + signal = 95; + else if (signal < 30) + signal = 30; + signal = 95 - signal; + } + rx_status.signal = signal; + priv->signal = signal; } else { struct rtl8187b_rx_hdr *hdr = (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); + /* The Realtek datasheet for the RTL8187B shows that the RX + * header contains the following quantities: signal quality, + * RSSI, AGC, the received power in dB, and the measured SNR. + * In testing, none of these quantities show qualitative + * agreement with AP signal strength, except for the AGC, + * which is inversely proportional to the strength of the + * signal. In the following, the quality and signal strength + * are derived from the AGC. The arbitrary scaling constants + * are chosen to make the results close to the values obtained + * for a BCM4312 using b43 as the driver. The noise is ignored + * for now. + */ flags = le32_to_cpu(hdr->flags); - signal = hdr->agc >> 1; - rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = 64 - min(hdr->noise, (u8)64); - rx_status.noise = hdr->noise; + quality = 170 - hdr->agc; + if (quality > 100) + quality = 100; + signal = 14 - hdr->agc / 2; + rx_status.qual = quality; + priv->quality = quality; + rx_status.signal = signal; + priv->signal = signal; + rx_status.antenna = (hdr->rssi >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = hdr->signal; - priv->quality = hdr->agc >> 1; - priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; } skb_trim(skb, flags & 0x0FFF); - rate = (flags >> 20) & 0xF; - if (rate > 3) { /* OFDM rate */ - if (signal > 90) - signal = 90; - else if (signal < 25) - signal = 25; - signal = 90 - signal; - } else { /* CCK rate */ - if (signal > 95) - signal = 95; - else if (signal < 30) - signal = 30; - signal = 95 - signal; - } - - rx_status.qual = priv->quality; - rx_status.signal = signal; rx_status.rate_idx = rate; rx_status.freq = dev->conf.channel->center_freq; rx_status.band = dev->conf.channel->band; @@ -1015,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv->mode = IEEE80211_IF_TYPE_MNTR; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - dev->max_signal = 65; + IEEE80211_HW_RX_INCLUDES_FCS; eeprom.data = dev; eeprom.register_read = rtl8187_eeprom_register_read; @@ -1132,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, (*channel++).hw_value = txpwr >> 8; } - if (priv->is_rtl8187b) + if (priv->is_rtl8187b) { printk(KERN_WARNING "rtl8187: 8187B chip detected. Support " "is EXPERIMENTAL, and could damage your\n" " hardware, use at your own risk\n"); + dev->flags |= IEEE80211_HW_SIGNAL_DBM; + } else { + dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC; + dev->max_signal = 65; + } + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) printk(KERN_INFO "rtl8187: inconsistency between id with OEM" " info!\n"); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fcc532bb6a7e..4d7b98b05030 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band; hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_SIGNAL_DB; hw->max_signal = 100; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 4d17d384578d..9ce55850271a 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -49,6 +49,13 @@ config BATTERY_OLPC help Say Y to enable support for the battery on the OLPC laptop. +config BATTERY_TOSA + tristate "Sharp SL-6000 (tosa) battery" + depends on MACH_TOSA && MFD_TC6393XB + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + config BATTERY_PALMTX tristate "Palm T|X battery" depends on MACH_PALMTX diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6f43a54ee420..4706bf8ff459 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o +obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index ab1e8289f07f..32570af3c5c9 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 +#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -84,6 +84,119 @@ static struct power_supply olpc_ac = { .get_property = olpc_ac_get_prop, }; +static char bat_serial[17]; /* Ick */ + +static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) +{ + if (olpc_platform_info.ecver > 0x44) { + if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ec_byte & BAT_STAT_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* er,... */ + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + /* Older EC didn't report charge/discharge bits */ + if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* Not _necessarily_ true but EC doesn't tell all yet */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } + + return 0; +} + +static int olpc_bat_get_health(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte) { + case 0: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + + case BAT_ERR_OVERTEMP: + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + + case BAT_ERR_OVERVOLTAGE: + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + break; + + case BAT_ERR_INFOFAIL: + case BAT_ERR_OUT_OF_CONTROL: + case BAT_ERR_ID_FAIL: + case BAT_ERR_ACR_FAIL: + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + + default: + /* Eep. We don't know this failure code */ + ret = -EIO; + } + + return ret; +} + +static int olpc_bat_get_mfr(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte >> 4) { + case 1: + val->strval = "Gold Peak"; + break; + case 2: + val->strval = "BYD"; + break; + default: + val->strval = "Unknown"; + break; + } + + return ret; +} + +static int olpc_bat_get_tech(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte & 0xf) { + case 1: + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + break; + case 2: + val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; + break; + default: + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + break; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy, int ret = 0; int16_t ec_word; uint8_t ec_byte; + uint64_t ser_buf; ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1); if (ret) @@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (ec_byte & BAT_STAT_DISCHARGING) - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* er,... */ - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - } else { - /* Older EC didn't report charge/discharge bits */ - if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* Not _necessarily_ true but EC doesn't tell all yet */ - val->intval = POWER_SUPPLY_STATUS_CHARGING; - break; - } + ret = olpc_bat_get_status(val, ec_byte); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & BAT_STAT_PRESENT); break; @@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ec_byte & BAT_STAT_DESTROY) val->intval = POWER_SUPPLY_HEALTH_DEAD; else { - ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + ret = olpc_bat_get_health(val); if (ret) return ret; - - switch (ec_byte) { - case 0: - val->intval = POWER_SUPPLY_HEALTH_GOOD; - break; - - case BAT_ERR_OVERTEMP: - val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; - break; - - case BAT_ERR_OVERVOLTAGE: - val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - break; - - case BAT_ERR_INFOFAIL: - case BAT_ERR_OUT_OF_CONTROL: - case BAT_ERR_ID_FAIL: - case BAT_ERR_ACR_FAIL: - val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; - break; - - default: - /* Eep. We don't know this failure code */ - return -EIO; - } } break; case POWER_SUPPLY_PROP_MANUFACTURER: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_mfr(val); if (ret) return ret; - - switch (ec_byte >> 4) { - case 1: - val->strval = "Gold Peak"; - break; - case 2: - val->strval = "BYD"; - break; - default: - val->strval = "Unknown"; - break; - } break; case POWER_SUPPLY_PROP_TECHNOLOGY: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_tech(val); if (ret) return ret; - - switch (ec_byte & 0xf) { - case 1: - val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; - break; - case 2: - val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; - break; - default: - val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; - break; - } break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2); @@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2); + if (ret) + return ret; + + ec_word = be16_to_cpu(ec_word); + val->intval = ec_word * 6250 / 15; + break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); + if (ret) + return ret; + + sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); + val->strval = bat_serial; + break; default: ret = -EINVAL; break; @@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_CHARGE_COUNTER, +}; + +/* EEPROM reading goes completely around the power_supply API, sadly */ + +#define EEPROM_START 0x20 +#define EEPROM_END 0x80 +#define EEPROM_SIZE (EEPROM_END - EEPROM_START) + +static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + uint8_t ec_byte; + int ret, end; + + if (off >= EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + end = EEPROM_START + off + count; + for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, + &buf[ec_byte - EEPROM_START], 1); + if (ret) { + printk(KERN_ERR "olpc-battery: EC command " + "EC_BAT_EEPROM @ 0x%x failed -" + " %d!\n", ec_byte, ret); + return -EIO; + } + } + + return count; +} + +static struct bin_attribute olpc_bat_eeprom = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = 0, + .read = olpc_bat_eeprom_read, }; /********************************************************************* @@ -290,8 +398,14 @@ static int __init olpc_bat_init(void) if (!olpc_platform_info.ecver) return -ENXIO; - if (olpc_platform_info.ecver < 0x43) { - printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver); + + /* + * We've seen a number of EC protocol changes; this driver requires + * the latest EC protocol, supported by 0x44 and above. + */ + if (olpc_platform_info.ecver < 0x44) { + printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " + "battery driver.\n", olpc_platform_info.ecver); return -ENXIO; } @@ -315,8 +429,14 @@ static int __init olpc_bat_init(void) if (ret) goto battery_failed; + ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom); + if (ret) + goto eeprom_failed; + goto success; +eeprom_failed: + power_supply_unregister(&olpc_bat); battery_failed: power_supply_unregister(&olpc_ac); ac_failed: @@ -327,6 +447,7 @@ success: static void __exit olpc_bat_exit(void) { + device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); platform_device_unregister(bat_pdev); diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 49215da5249b..fe2aeb11939b 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_empty), POWER_SUPPLY_ATTR(charge_now), POWER_SUPPLY_ATTR(charge_avg), + POWER_SUPPLY_ATTR(charge_counter), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c new file mode 100644 index 000000000000..bf664fbd6610 --- /dev/null +++ b/drivers/power/tosa_battery.c @@ -0,0 +1,486 @@ +/* + * Battery and Power Management code for the Sharp SL-6000x + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/wm97xx.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/arch/tosa.h> + +static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ +static struct work_struct bat_work; + +struct tosa_bat { + int status; + struct power_supply psy; + int full_chrg; + + struct mutex work_lock; /* protects data */ + + bool (*is_present)(struct tosa_bat *bat); + int gpio_full; + int gpio_charge_off; + + int technology; + + int gpio_bat; + int adc_bat; + int adc_bat_divider; + int bat_max; + int bat_min; + + int gpio_temp; + int adc_temp; + int adc_temp_divider; +}; + +static struct tosa_bat tosa_bat_main; +static struct tosa_bat tosa_bat_jacket; + +static unsigned long tosa_read_bat(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_bat < 0 || bat->adc_bat < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_bat, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_bat); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); + + value = value * 1000000 / bat->adc_bat_divider; + + return value; +} + +static unsigned long tosa_read_temp(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_temp < 0 || bat->adc_temp < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_temp, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_temp); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); + + value = value * 10000 / bat->adc_temp_divider; + + return value; +} + +static int tosa_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); + + if (bat->is_present && !bat->is_present(bat) + && psp != POWER_SUPPLY_PROP_PRESENT) { + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = tosa_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) + val->intval = bat->bat_max; + else + val->intval = bat->full_chrg; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = tosa_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) +{ + return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0; +} + +static void tosa_bat_external_power_changed(struct power_supply *psy) +{ + schedule_work(&bat_work); +} + +static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) +{ + pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; +} + +static void tosa_bat_update(struct tosa_bat *bat) +{ + int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + + old = bat->status; + + if (bat->is_present && !bat->is_present(bat)) { + printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_UNKNOWN; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { + if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { + gpio_set_value(bat->gpio_charge_off, 0); + mdelay(15); + } + + if (gpio_get_value(bat->gpio_full)) { + if (old == POWER_SUPPLY_STATUS_CHARGING || + bat->full_chrg == -1) + bat->full_chrg = tosa_read_bat(bat); + + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + gpio_set_value(bat->gpio_charge_off, 0); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (old != bat->status) + power_supply_changed(psy); + + mutex_unlock(&bat->work_lock); +} + +static void tosa_bat_work(struct work_struct *work) +{ + tosa_bat_update(&tosa_bat_main); + tosa_bat_update(&tosa_bat_jacket); +} + + +static enum power_supply_property tosa_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_PRESENT, +}; + +static enum power_supply_property tosa_bat_bu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct tosa_bat tosa_bat_main = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + .use_for_apm = 1, + }, + + .gpio_full = TOSA_GPIO_BAT0_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT0_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT1_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_jacket = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "jacket-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .is_present = tosa_jacket_bat_is_present, + .gpio_full = TOSA_GPIO_BAT1_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT1_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT0_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_bu = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, + + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_bu_props, + .num_properties = ARRAY_SIZE(tosa_bat_bu_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_off = -1, + + .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, + + .gpio_bat = TOSA_GPIO_BU_CHRG_ON, + .adc_bat = WM97XX_AUX_ID4, + .adc_bat_divider = 1266, + + .gpio_temp = -1, + .adc_temp = -1, + .adc_temp_divider = -1, +}; + +static struct { + int gpio; + char *name; + bool output; + int value; +} gpios[] = { + { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 }, + { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 }, + { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 }, + { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 }, + { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 }, + { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 }, + { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 }, + { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 }, + { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 }, + { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, + { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, + { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, + { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 }, +}; + +#ifdef CONFIG_PM +static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) +{ + /* flush all pending status updates */ + flush_scheduled_work(); + return 0; +} + +static int tosa_bat_resume(struct platform_device *dev) +{ + /* things may have changed while we were away */ + schedule_work(&bat_work); + return 0; +} +#else +#define tosa_bat_suspend NULL +#define tosa_bat_resume NULL +#endif + +static int __devinit tosa_bat_probe(struct platform_device *dev) +{ + int ret; + int i; + + if (!machine_is_tosa()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) { + i--; + goto err_gpio; + } + + if (gpios[i].output) + ret = gpio_direction_output(gpios[i].gpio, + gpios[i].value); + else + ret = gpio_direction_input(gpios[i].gpio); + + if (ret) + goto err_gpio; + } + + mutex_init(&tosa_bat_main.work_lock); + mutex_init(&tosa_bat_jacket.work_lock); + + INIT_WORK(&bat_work, tosa_bat_work); + + ret = power_supply_register(&dev->dev, &tosa_bat_main.psy); + if (ret) + goto err_psy_reg_main; + ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy); + if (ret) + goto err_psy_reg_jacket; + ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &tosa_bat_main); + if (ret) + goto err_req_main; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket full", &tosa_bat_jacket); + if (ret) + goto err_req_jacket; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket detect", &tosa_bat_jacket); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); +err_req_jacket: + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); +err_req_main: + power_supply_unregister(&tosa_bat_bu.psy); +err_psy_reg_bu: + power_supply_unregister(&tosa_bat_jacket.psy); +err_psy_reg_jacket: + power_supply_unregister(&tosa_bat_main.psy); +err_psy_reg_main: + + /* see comment in tosa_bat_remove */ + flush_scheduled_work(); + + i--; +err_gpio: + for (; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return ret; +} + +static int __devexit tosa_bat_remove(struct platform_device *dev) +{ + int i; + + free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + + power_supply_unregister(&tosa_bat_bu.psy); + power_supply_unregister(&tosa_bat_jacket.psy); + power_supply_unregister(&tosa_bat_main.psy); + + /* + * now flush all pending work. + * we won't get any more schedules, since all + * sources (isr and external_power_changed) + * are unregistered now. + */ + flush_scheduled_work(); + + for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return 0; +} + +static struct platform_driver tosa_bat_driver = { + .driver.name = "wm97xx-battery", + .driver.owner = THIS_MODULE, + .probe = tosa_bat_probe, + .remove = __devexit_p(tosa_bat_remove), + .suspend = tosa_bat_suspend, + .resume = tosa_bat_resume, +}; + +static int __init tosa_bat_init(void) +{ + return platform_driver_register(&tosa_bat_driver); +} + +static void __exit tosa_bat_exit(void) +{ + platform_driver_unregister(&tosa_bat_driver); +} + +module_init(tosa_bat_init); +module_exit(tosa_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_DESCRIPTION("Tosa battery driver"); +MODULE_ALIAS("platform:wm97xx-battery"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig new file mode 100644 index 000000000000..a656128f1fdd --- /dev/null +++ b/drivers/regulator/Kconfig @@ -0,0 +1,59 @@ +menu "Voltage and Current regulators" + +config REGULATOR + bool "Voltage and Current Regulator Support" + default n + help + Generic Voltage and Current Regulator support. + + This framework is designed to provide a generic interface to voltage + and current regulators within the Linux kernel. It's intended to + provide voltage and current control to client or consumer drivers and + also provide status information to user space applications through a + sysfs interface. + + The intention is to allow systems to dynamically control regulator + output in order to save power and prolong battery life. This applies + to both voltage regulators (where voltage output is controllable) and + current sinks (where current output is controllable). + + This framework safely compiles out if not selected so that client + drivers can still be used in systems with no software controllable + regulators. + + If unsure, say no. + +config REGULATOR_DEBUG + bool "Regulator debug support" + depends on REGULATOR + help + Say yes here to enable debugging support. + +config REGULATOR_FIXED_VOLTAGE + tristate + default n + select REGULATOR + +config REGULATOR_VIRTUAL_CONSUMER + tristate "Virtual regulator consumer support" + default n + select REGULATOR + help + This driver provides a virtual consumer for the voltage and + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. + + If unsure, say no. + +config REGULATOR_BQ24022 + tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" + default n + select REGULATOR + help + This driver controls a TI bq24022 Charger attached via + GPIOs. The provided current regulator can enable/disable + charging select between 100 mA and 500 mA charging current + limit. + +endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile new file mode 100644 index 000000000000..ac2c64efe65c --- /dev/null +++ b/drivers/regulator/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for regulator drivers. +# + + +obj-$(CONFIG_REGULATOR) += core.o +obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o +obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o + +obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o + +ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c new file mode 100644 index 000000000000..263699d6152d --- /dev/null +++ b/drivers/regulator/bq24022.c @@ -0,0 +1,167 @@ +/* + * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) + * 1-Cell Li-Ion Charger connected via GPIOs. + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/regulator/bq24022.h> +#include <linux/regulator/driver.h> + +static int bq24022_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + max_uA >= 500000 ? "500" : "100"); + + /* REVISIT: maybe return error if min_uA != 0 ? */ + gpio_set_value(pdata->gpio_iset2, max_uA >= 500000); + return 0; +} + +static int bq24022_get_current_limit(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; +} + +static int bq24022_enable(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "enabling charger\n"); + + gpio_set_value(pdata->gpio_nce, 0); + return 0; +} + +static int bq24022_disable(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "disabling charger\n"); + + gpio_set_value(pdata->gpio_nce, 1); + return 0; +} + +static int bq24022_is_enabled(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + return !gpio_get_value(pdata->gpio_nce); +} + +static struct regulator_ops bq24022_ops = { + .set_current_limit = bq24022_set_current_limit, + .get_current_limit = bq24022_get_current_limit, + .enable = bq24022_enable, + .disable = bq24022_disable, + .is_enabled = bq24022_is_enabled, +}; + +static struct regulator_desc bq24022_desc = { + .name = "bq24022", + .ops = &bq24022_ops, + .type = REGULATOR_CURRENT, +}; + +static int __init bq24022_probe(struct platform_device *pdev) +{ + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct regulator_dev *bq24022; + int ret; + + if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2) + return -EINVAL; + + ret = gpio_request(pdata->gpio_nce, "ncharge_en"); + if (ret) { + dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n", + pdata->gpio_nce); + goto err_ce; + } + ret = gpio_request(pdata->gpio_iset2, "charge_mode"); + if (ret) { + dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n", + pdata->gpio_iset2); + goto err_iset2; + } + ret = gpio_direction_output(pdata->gpio_iset2, 0); + ret = gpio_direction_output(pdata->gpio_nce, 1); + + bq24022 = regulator_register(&bq24022_desc, pdev); + if (IS_ERR(bq24022)) { + dev_dbg(&pdev->dev, "couldn't register regulator\n"); + ret = PTR_ERR(bq24022); + goto err_reg; + } + platform_set_drvdata(pdev, bq24022); + dev_dbg(&pdev->dev, "registered regulator\n"); + + return 0; +err_reg: + gpio_free(pdata->gpio_iset2); +err_iset2: + gpio_free(pdata->gpio_nce); +err_ce: + return ret; +} + +static int __devexit bq24022_remove(struct platform_device *pdev) +{ + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct regulator_dev *bq24022 = platform_get_drvdata(pdev); + + regulator_unregister(bq24022); + gpio_free(pdata->gpio_iset2); + gpio_free(pdata->gpio_nce); + + return 0; +} + +static struct platform_driver bq24022_driver = { + .driver = { + .name = "bq24022", + }, + .remove = __devexit_p(bq24022_remove), +}; + +static int __init bq24022_init(void) +{ + return platform_driver_probe(&bq24022_driver, bq24022_probe); +} + +static void __exit bq24022_exit(void) +{ + platform_driver_unregister(&bq24022_driver); +} + +/* + * make sure this is probed before gpio_vbus and pda_power, + * but after asic3 or other GPIO expander drivers. + */ +subsys_initcall(bq24022_init); +module_exit(bq24022_exit); + +MODULE_AUTHOR("Philipp Zabel"); +MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c new file mode 100644 index 000000000000..9c7986261568 --- /dev/null +++ b/drivers/regulator/core.c @@ -0,0 +1,1903 @@ +/* + * core.c -- Voltage/Current Regulator framework. + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/suspend.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#define REGULATOR_VERSION "0.5" + +static DEFINE_MUTEX(regulator_list_mutex); +static LIST_HEAD(regulator_list); +static LIST_HEAD(regulator_map_list); + +/** + * struct regulator_dev + * + * Voltage / Current regulator class device. One for each regulator. + */ +struct regulator_dev { + struct regulator_desc *desc; + int use_count; + + /* lists we belong to */ + struct list_head list; /* list of all regulators */ + struct list_head slist; /* list of supplied regulators */ + + /* lists we own */ + struct list_head consumer_list; /* consumers we supply */ + struct list_head supply_list; /* regulators we supply */ + + struct blocking_notifier_head notifier; + struct mutex mutex; /* consumer lock */ + struct module *owner; + struct device dev; + struct regulation_constraints *constraints; + struct regulator_dev *supply; /* for tree */ + + void *reg_data; /* regulator_dev data */ +}; + +/** + * struct regulator_map + * + * Used to provide symbolic supply names to devices. + */ +struct regulator_map { + struct list_head list; + struct device *dev; + const char *supply; + const char *regulator; +}; + +static inline struct regulator_dev *to_rdev(struct device *d) +{ + return container_of(d, struct regulator_dev, dev); +} + +/* + * struct regulator + * + * One for each consumer device. + */ +struct regulator { + struct device *dev; + struct list_head list; + int uA_load; + int min_uV; + int max_uV; + int enabled; /* client has called enabled */ + char *supply_name; + struct device_attribute dev_attr; + struct regulator_dev *rdev; +}; + +static int _regulator_is_enabled(struct regulator_dev *rdev); +static int _regulator_disable(struct regulator_dev *rdev); +static int _regulator_get_voltage(struct regulator_dev *rdev); +static int _regulator_get_current_limit(struct regulator_dev *rdev); +static unsigned int _regulator_get_mode(struct regulator_dev *rdev); +static void _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); + +/* gets the regulator for a given consumer device */ +static struct regulator *get_device_regulator(struct device *dev) +{ + struct regulator *regulator = NULL; + struct regulator_dev *rdev; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + mutex_lock(&rdev->mutex); + list_for_each_entry(regulator, &rdev->consumer_list, list) { + if (regulator->dev == dev) { + mutex_unlock(&rdev->mutex); + mutex_unlock(®ulator_list_mutex); + return regulator; + } + } + mutex_unlock(&rdev->mutex); + } + mutex_unlock(®ulator_list_mutex); + return NULL; +} + +/* Platform voltage constraint check */ +static int regulator_check_voltage(struct regulator_dev *rdev, + int *min_uV, int *max_uV) +{ + BUG_ON(*min_uV > *max_uV); + + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + + if (*max_uV > rdev->constraints->max_uV) + *max_uV = rdev->constraints->max_uV; + if (*min_uV < rdev->constraints->min_uV) + *min_uV = rdev->constraints->min_uV; + + if (*min_uV > *max_uV) + return -EINVAL; + + return 0; +} + +/* current constraint check */ +static int regulator_check_current_limit(struct regulator_dev *rdev, + int *min_uA, int *max_uA) +{ + BUG_ON(*min_uA > *max_uA); + + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + + if (*max_uA > rdev->constraints->max_uA) + *max_uA = rdev->constraints->max_uA; + if (*min_uA < rdev->constraints->min_uA) + *min_uA = rdev->constraints->min_uA; + + if (*min_uA > *max_uA) + return -EINVAL; + + return 0; +} + +/* operating mode constraint check */ +static int regulator_check_mode(struct regulator_dev *rdev, int mode) +{ + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + if (!(rdev->constraints->valid_modes_mask & mode)) { + printk(KERN_ERR "%s: invalid mode %x for %s\n", + __func__, mode, rdev->desc->name); + return -EINVAL; + } + return 0; +} + +/* dynamic regulator mode switching constraint check */ +static int regulator_check_drms(struct regulator_dev *rdev) +{ + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + return 0; +} + +static ssize_t device_requested_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator *regulator; + + regulator = get_device_regulator(dev); + if (regulator == NULL) + return 0; + + return sprintf(buf, "%d\n", regulator->uA_load); +} + +static ssize_t regulator_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + ssize_t ret; + + mutex_lock(&rdev->mutex); + ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev)); + mutex_unlock(&rdev->mutex); + + return ret; +} + +static ssize_t regulator_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); +} + +static ssize_t regulator_opmode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + int mode = _regulator_get_mode(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + int state = _regulator_is_enabled(rdev); + + if (state > 0) + return sprintf(buf, "enabled\n"); + else if (state == 0) + return sprintf(buf, "disabled\n"); + else + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_min_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uA); +} + +static ssize_t regulator_max_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uA); +} + +static ssize_t regulator_min_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uV); +} + +static ssize_t regulator_max_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uV); +} + +static ssize_t regulator_total_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + struct regulator *regulator; + int uA = 0; + + mutex_lock(&rdev->mutex); + list_for_each_entry(regulator, &rdev->consumer_list, list) + uA += regulator->uA_load; + mutex_unlock(&rdev->mutex); + return sprintf(buf, "%d\n", uA); +} + +static ssize_t regulator_num_users_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + return sprintf(buf, "%d\n", rdev->use_count); +} + +static ssize_t regulator_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + return sprintf(buf, "voltage\n"); + case REGULATOR_CURRENT: + return sprintf(buf, "current\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_suspend_mem_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV); +} + +static ssize_t regulator_suspend_disk_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV); +} + +static ssize_t regulator_suspend_standby_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV); +} + +static ssize_t suspend_opmode_show(struct regulator_dev *rdev, + unsigned int mode, char *buf) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_suspend_mem_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_mem.mode, buf); +} + +static ssize_t regulator_suspend_disk_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_disk.mode, buf); +} + +static ssize_t regulator_suspend_standby_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_standby.mode, buf); +} + +static ssize_t regulator_suspend_mem_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_mem.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} + +static ssize_t regulator_suspend_disk_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_disk.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} + +static ssize_t regulator_suspend_standby_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_standby.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} +static struct device_attribute regulator_dev_attrs[] = { + __ATTR(microvolts, 0444, regulator_uV_show, NULL), + __ATTR(microamps, 0444, regulator_uA_show, NULL), + __ATTR(opmode, 0444, regulator_opmode_show, NULL), + __ATTR(state, 0444, regulator_state_show, NULL), + __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL), + __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL), + __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL), + __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL), + __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL), + __ATTR(num_users, 0444, regulator_num_users_show, NULL), + __ATTR(type, 0444, regulator_type_show, NULL), + __ATTR(suspend_mem_microvolts, 0444, + regulator_suspend_mem_uV_show, NULL), + __ATTR(suspend_disk_microvolts, 0444, + regulator_suspend_disk_uV_show, NULL), + __ATTR(suspend_standby_microvolts, 0444, + regulator_suspend_standby_uV_show, NULL), + __ATTR(suspend_mem_mode, 0444, + regulator_suspend_mem_mode_show, NULL), + __ATTR(suspend_disk_mode, 0444, + regulator_suspend_disk_mode_show, NULL), + __ATTR(suspend_standby_mode, 0444, + regulator_suspend_standby_mode_show, NULL), + __ATTR(suspend_mem_state, 0444, + regulator_suspend_mem_state_show, NULL), + __ATTR(suspend_disk_state, 0444, + regulator_suspend_disk_state_show, NULL), + __ATTR(suspend_standby_state, 0444, + regulator_suspend_standby_state_show, NULL), + __ATTR_NULL, +}; + +static void regulator_dev_release(struct device *dev) +{ + struct regulator_dev *rdev = to_rdev(dev); + kfree(rdev); +} + +static struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_attrs = regulator_dev_attrs, +}; + +/* Calculate the new optimum regulator operating mode based on the new total + * consumer load. All locks held by caller */ +static void drms_uA_update(struct regulator_dev *rdev) +{ + struct regulator *sibling; + int current_uA = 0, output_uV, input_uV, err; + unsigned int mode; + + err = regulator_check_drms(rdev); + if (err < 0 || !rdev->desc->ops->get_optimum_mode || + !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode); + return; + + /* get output voltage */ + output_uV = rdev->desc->ops->get_voltage(rdev); + if (output_uV <= 0) + return; + + /* get input voltage */ + if (rdev->supply && rdev->supply->desc->ops->get_voltage) + input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply); + else + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) + return; + + /* calc total requested load */ + list_for_each_entry(sibling, &rdev->consumer_list, list) + current_uA += sibling->uA_load; + + /* now get the optimum mode for our new total regulator load */ + mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, + output_uV, current_uA); + + /* check the new mode is allowed */ + err = regulator_check_mode(rdev, mode); + if (err == 0) + rdev->desc->ops->set_mode(rdev, mode); +} + +static int suspend_set_state(struct regulator_dev *rdev, + struct regulator_state *rstate) +{ + int ret = 0; + + /* enable & disable are mandatory for suspend control */ + if (!rdev->desc->ops->set_suspend_enable || + !rdev->desc->ops->set_suspend_disable) + return -EINVAL; + + if (rstate->enabled) + ret = rdev->desc->ops->set_suspend_enable(rdev); + else + ret = rdev->desc->ops->set_suspend_disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enabled/disable\n", __func__); + return ret; + } + + if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) { + ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set voltage\n", + __func__); + return ret; + } + } + + if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) { + ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set mode\n", __func__); + return ret; + } + } + return ret; +} + +/* locks held by caller */ +static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) +{ + if (!rdev->constraints) + return -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + return suspend_set_state(rdev, + &rdev->constraints->state_standby); + case PM_SUSPEND_MEM: + return suspend_set_state(rdev, + &rdev->constraints->state_mem); + case PM_SUSPEND_MAX: + return suspend_set_state(rdev, + &rdev->constraints->state_disk); + default: + return -EINVAL; + } +} + +static void print_constraints(struct regulator_dev *rdev) +{ + struct regulation_constraints *constraints = rdev->constraints; + char buf[80]; + int count; + + if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV == constraints->max_uV) + count = sprintf(buf, "%d mV ", + constraints->min_uV / 1000); + else + count = sprintf(buf, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } else { + if (constraints->min_uA == constraints->max_uA) + count = sprintf(buf, "%d mA ", + constraints->min_uA / 1000); + else + count = sprintf(buf, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) + count += sprintf(buf + count, "fast "); + if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) + count += sprintf(buf + count, "normal "); + if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE) + count += sprintf(buf + count, "idle "); + if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) + count += sprintf(buf + count, "standby"); + + printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); +} + +#define REG_STR_SIZE 32 + +static struct regulator *create_regulator(struct regulator_dev *rdev, + struct device *dev, + const char *supply_name) +{ + struct regulator *regulator; + char buf[REG_STR_SIZE]; + int err, size; + + regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); + if (regulator == NULL) + return NULL; + + mutex_lock(&rdev->mutex); + regulator->rdev = rdev; + list_add(®ulator->list, &rdev->consumer_list); + + if (dev) { + /* create a 'requested_microamps_name' sysfs entry */ + size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s", + supply_name); + if (size >= REG_STR_SIZE) + goto overflow_err; + + regulator->dev = dev; + regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL); + if (regulator->dev_attr.attr.name == NULL) + goto attr_name_err; + + regulator->dev_attr.attr.owner = THIS_MODULE; + regulator->dev_attr.attr.mode = 0444; + regulator->dev_attr.show = device_requested_uA_show; + err = device_create_file(dev, ®ulator->dev_attr); + if (err < 0) { + printk(KERN_WARNING "%s: could not add regulator_dev" + " load sysfs\n", __func__); + goto attr_name_err; + } + + /* also add a link to the device sysfs entry */ + size = scnprintf(buf, REG_STR_SIZE, "%s-%s", + dev->kobj.name, supply_name); + if (size >= REG_STR_SIZE) + goto attr_err; + + regulator->supply_name = kstrdup(buf, GFP_KERNEL); + if (regulator->supply_name == NULL) + goto attr_err; + + err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj, + buf); + if (err) { + printk(KERN_WARNING + "%s: could not add device link %s err %d\n", + __func__, dev->kobj.name, err); + device_remove_file(dev, ®ulator->dev_attr); + goto link_name_err; + } + } + mutex_unlock(&rdev->mutex); + return regulator; +link_name_err: + kfree(regulator->supply_name); +attr_err: + device_remove_file(regulator->dev, ®ulator->dev_attr); +attr_name_err: + kfree(regulator->dev_attr.attr.name); +overflow_err: + list_del(®ulator->list); + kfree(regulator); + mutex_unlock(&rdev->mutex); + return NULL; +} + +/** + * regulator_get - lookup and obtain a reference to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. Use of supply names + * configured via regulator_set_device_supply() is strongly + * encouraged. + */ +struct regulator *regulator_get(struct device *dev, const char *id) +{ + struct regulator_dev *rdev; + struct regulator_map *map; + struct regulator *regulator = ERR_PTR(-ENODEV); + const char *supply = id; + + if (id == NULL) { + printk(KERN_ERR "regulator: get() with no identifier\n"); + return regulator; + } + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(map, ®ulator_map_list, list) { + if (dev == map->dev && + strcmp(map->supply, id) == 0) { + supply = map->regulator; + break; + } + } + + list_for_each_entry(rdev, ®ulator_list, list) { + if (strcmp(supply, rdev->desc->name) == 0 && + try_module_get(rdev->owner)) + goto found; + } + printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", + id); + mutex_unlock(®ulator_list_mutex); + return regulator; + +found: + regulator = create_regulator(rdev, dev, id); + if (regulator == NULL) { + regulator = ERR_PTR(-ENOMEM); + module_put(rdev->owner); + } + + mutex_unlock(®ulator_list_mutex); + return regulator; +} +EXPORT_SYMBOL_GPL(regulator_get); + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + struct regulator_dev *rdev; + + if (regulator == NULL || IS_ERR(regulator)) + return; + + if (regulator->enabled) { + printk(KERN_WARNING "Releasing supply %s while enabled\n", + regulator->supply_name); + WARN_ON(regulator->enabled); + regulator_disable(regulator); + } + + mutex_lock(®ulator_list_mutex); + rdev = regulator->rdev; + + /* remove any sysfs entries */ + if (regulator->dev) { + sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); + kfree(regulator->supply_name); + device_remove_file(regulator->dev, ®ulator->dev_attr); + kfree(regulator->dev_attr.attr.name); + } + list_del(®ulator->list); + kfree(regulator); + + module_put(rdev->owner); + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_put); + +/* locks held by regulator_enable() */ +static int _regulator_enable(struct regulator_dev *rdev) +{ + int ret = -EINVAL; + + if (!rdev->constraints) { + printk(KERN_ERR "%s: %s has no constraints\n", + __func__, rdev->desc->name); + return ret; + } + + /* do we need to enable the supply regulator first */ + if (rdev->supply) { + ret = _regulator_enable(rdev->supply); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s: %d\n", + __func__, rdev->desc->name, ret); + return ret; + } + } + + /* check voltage and requested load before enabling */ + if (rdev->desc->ops->enable) { + + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & + REGULATOR_CHANGE_DRMS)) + drms_uA_update(rdev); + + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s: %d\n", + __func__, rdev->desc->name, ret); + return ret; + } + rdev->use_count++; + return ret; + } + + return ret; +} + +/** + * regulator_enable - enable regulator output + * @regulator: regulator source + * + * Enable the regulator output at the predefined voltage or current value. + * NOTE: the output value can be set by other drivers, boot loader or may be + * hardwired in the regulator. + * NOTE: calls to regulator_enable() must be balanced with calls to + * regulator_disable(). + */ +int regulator_enable(struct regulator *regulator) +{ + int ret; + + if (regulator->enabled) { + printk(KERN_CRIT "Regulator %s already enabled\n", + regulator->supply_name); + WARN_ON(regulator->enabled); + return 0; + } + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 1; + ret = _regulator_enable(regulator->rdev); + if (ret != 0) + regulator->enabled = 0; + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_enable); + +/* locks held by regulator_disable() */ +static int _regulator_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + /* are we the last user and permitted to disable ? */ + if (rdev->use_count == 1 && !rdev->constraints->always_on) { + + /* we are last user */ + if (rdev->desc->ops->disable) { + ret = rdev->desc->ops->disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to disable %s\n", + __func__, rdev->desc->name); + return ret; + } + } + + /* decrease our supplies ref count and disable if required */ + if (rdev->supply) + _regulator_disable(rdev->supply); + + rdev->use_count = 0; + } else if (rdev->use_count > 1) { + + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & + REGULATOR_CHANGE_DRMS)) + drms_uA_update(rdev); + + rdev->use_count--; + } + return ret; +} + +/** + * regulator_disable - disable regulator output + * @regulator: regulator source + * + * Disable the regulator output voltage or current. + * NOTE: this will only disable the regulator output if no other consumer + * devices have it enabled. + * NOTE: calls to regulator_enable() must be balanced with calls to + * regulator_disable(). + */ +int regulator_disable(struct regulator *regulator) +{ + int ret; + + if (!regulator->enabled) { + printk(KERN_ERR "%s: not in use by this consumer\n", + __func__); + return 0; + } + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 0; + regulator->uA_load = 0; + ret = _regulator_disable(regulator->rdev); + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_disable); + +/* locks held by regulator_force_disable() */ +static int _regulator_force_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + /* force disable */ + if (rdev->desc->ops->disable) { + /* ah well, who wants to live forever... */ + ret = rdev->desc->ops->disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to force disable %s\n", + __func__, rdev->desc->name); + return ret; + } + /* notify other consumers that power has been forced off */ + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE, + NULL); + } + + /* decrease our supplies ref count and disable if required */ + if (rdev->supply) + _regulator_disable(rdev->supply); + + rdev->use_count = 0; + return ret; +} + +/** + * regulator_force_disable - force disable regulator output + * @regulator: regulator source + * + * Forcibly disable the regulator output voltage or current. + * NOTE: this *will* disable the regulator output even if other consumer + * devices have it enabled. This should be used for situations when device + * damage will likely occur if the regulator is not disabled (e.g. over temp). + */ +int regulator_force_disable(struct regulator *regulator) +{ + int ret; + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 0; + regulator->uA_load = 0; + ret = _regulator_force_disable(regulator->rdev); + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_force_disable); + +static int _regulator_is_enabled(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->is_enabled) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->is_enabled(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_is_enabled - is the regulator output enabled + * @regulator: regulator source + * + * Returns zero for disabled otherwise return number of enable requests. + */ +int regulator_is_enabled(struct regulator *regulator) +{ + return _regulator_is_enabled(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_is_enabled); + +/** + * regulator_set_voltage - set regulator output voltage + * @regulator: regulator source + * @min_uV: Minimum required voltage in uV + * @max_uV: Maximum acceptable voltage in uV + * + * Sets a voltage regulator to the desired output voltage. This can be set + * during any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the voltage will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new voltage when enabled. + * + * NOTE: If the regulator is shared between several devices then the lowest + * request voltage that meets the system constraints will be used. + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_voltage) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_voltage(rdev, &min_uV, &max_uV); + if (ret < 0) + goto out; + regulator->min_uV = min_uV; + regulator->max_uV = max_uV; + ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV); + +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage); + +static int _regulator_get_voltage(struct regulator_dev *rdev) +{ + /* sanity check */ + if (rdev->desc->ops->get_voltage) + return rdev->desc->ops->get_voltage(rdev); + else + return -EINVAL; +} + +/** + * regulator_get_voltage - get regulator output voltage + * @regulator: regulator source + * + * This returns the current regulator voltage in uV. + * + * NOTE: If the regulator is disabled it will return the voltage value. This + * function should not be used to determine regulator state. + */ +int regulator_get_voltage(struct regulator *regulator) +{ + int ret; + + mutex_lock(®ulator->rdev->mutex); + + ret = _regulator_get_voltage(regulator->rdev); + + mutex_unlock(®ulator->rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage); + +/** + * regulator_set_current_limit - set regulator output current limit + * @regulator: regulator source + * @min_uA: Minimuum supported current in uA + * @max_uA: Maximum supported current in uA + * + * Sets current sink to the desired output current. This can be set during + * any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the current will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new current when enabled. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_current_limit) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_current_limit(rdev, &min_uA, &max_uA); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA); +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_current_limit); + +static int _regulator_get_current_limit(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->get_current_limit) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->get_current_limit(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_get_current_limit - get regulator output current + * @regulator: regulator source + * + * This returns the current supplied by the specified current sink in uA. + * + * NOTE: If the regulator is disabled it will return the current value. This + * function should not be used to determine regulator state. + */ +int regulator_get_current_limit(struct regulator *regulator) +{ + return _regulator_get_current_limit(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_current_limit); + +/** + * regulator_set_mode - set regulator operating mode + * @regulator: regulator source + * @mode: operating mode - one of the REGULATOR_MODE constants + * + * Set regulator operating mode to increase regulator efficiency or improve + * regulation performance. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_mode(struct regulator *regulator, unsigned int mode) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_mode) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_mode(rdev, mode); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_mode(rdev, mode); +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_mode); + +static unsigned int _regulator_get_mode(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->get_mode) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->get_mode(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_get_mode - get regulator operating mode + * @regulator: regulator source + * + * Get the current regulator operating mode. + */ +unsigned int regulator_get_mode(struct regulator *regulator) +{ + return _regulator_get_mode(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_mode); + +/** + * regulator_set_optimum_mode - set regulator optimum operating mode + * @regulator: regulator source + * @uA_load: load current + * + * Notifies the regulator core of a new device load. This is then used by + * DRMS (if enabled by constraints) to set the most efficient regulator + * operating mode for the new regulator loading. + * + * Consumer devices notify their supply regulator of the maximum power + * they will require (can be taken from device datasheet in the power + * consumption tables) when they change operational status and hence power + * state. Examples of operational state changes that can affect power + * consumption are :- + * + * o Device is opened / closed. + * o Device I/O is about to begin or has just finished. + * o Device is idling in between work. + * + * This information is also exported via sysfs to userspace. + * + * DRMS will sum the total requested load on the regulator and change + * to the most efficient operating mode if platform constraints allow. + * + * Returns the new regulator mode or error. + */ +int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator *consumer; + int ret, output_uV, input_uV, total_uA_load = 0; + unsigned int mode; + + mutex_lock(&rdev->mutex); + + regulator->uA_load = uA_load; + ret = regulator_check_drms(rdev); + if (ret < 0) + goto out; + ret = -EINVAL; + + /* sanity check */ + if (!rdev->desc->ops->get_optimum_mode) + goto out; + + /* get output voltage */ + output_uV = rdev->desc->ops->get_voltage(rdev); + if (output_uV <= 0) { + printk(KERN_ERR "%s: invalid output voltage found for %s\n", + __func__, rdev->desc->name); + goto out; + } + + /* get input voltage */ + if (rdev->supply && rdev->supply->desc->ops->get_voltage) + input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply); + else + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) { + printk(KERN_ERR "%s: invalid input voltage found for %s\n", + __func__, rdev->desc->name); + goto out; + } + + /* calc total requested load for this regulator */ + list_for_each_entry(consumer, &rdev->consumer_list, list) + total_uA_load += consumer->uA_load; + + mode = rdev->desc->ops->get_optimum_mode(rdev, + input_uV, output_uV, + total_uA_load); + if (ret <= 0) { + printk(KERN_ERR "%s: failed to get optimum mode for %s @" + " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + total_uA_load, input_uV, output_uV); + goto out; + } + + ret = rdev->desc->ops->set_mode(rdev, mode); + if (ret <= 0) { + printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", + __func__, mode, rdev->desc->name); + goto out; + } + ret = mode; +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); + +/** + * regulator_register_notifier - register regulator event notifier + * @regulator: regulator source + * @notifier_block: notifier block + * + * Register notifier block to receive regulator events. + */ +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_register(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_register_notifier); + +/** + * regulator_unregister_notifier - unregister regulator event notifier + * @regulator: regulator source + * @notifier_block: notifier block + * + * Unregister regulator event notifier block. + */ +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_unregister_notifier); + +/* notify regulator consumers and downstream regulator consumers */ +static void _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + struct regulator_dev *_rdev; + + /* call rdev chain first */ + mutex_lock(&rdev->mutex); + blocking_notifier_call_chain(&rdev->notifier, event, NULL); + mutex_unlock(&rdev->mutex); + + /* now notify regulator we supply */ + list_for_each_entry(_rdev, &rdev->supply_list, slist) + _notifier_call_chain(_rdev, event, data); +} + +/** + * regulator_bulk_get - get multiple regulator consumers + * + * @dev: Device to supply + * @num_consumers: Number of consumers to register + * @consumers: Configuration of consumers; clients are stored here. + * + * @return 0 on success, an errno on failure. + * + * This helper function allows drivers to get several regulator + * consumers in one operation. If any of the regulators cannot be + * acquired then any regulators that were allocated will be freed + * before returning to the caller. + */ +int regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) + consumers[i].consumer = NULL; + + for (i = 0; i < num_consumers; i++) { + consumers[i].consumer = regulator_get(dev, + consumers[i].supply); + if (IS_ERR(consumers[i].consumer)) { + dev_err(dev, "Failed to get supply '%s'\n", + consumers[i].supply); + ret = PTR_ERR(consumers[i].consumer); + consumers[i].consumer = NULL; + goto err; + } + } + + return 0; + +err: + for (i = 0; i < num_consumers && consumers[i].consumer; i++) + regulator_put(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_get); + +/** + * regulator_bulk_enable - enable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to enable multiple regulator + * clients in a single API call. If any consumers cannot be enabled + * then any others that were enabled will be disabled again prior to + * return. + */ +int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) { + ret = regulator_enable(consumers[i].consumer); + if (ret != 0) + goto err; + } + + return 0; + +err: + printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); + for (i = 0; i < num_consumers; i++) + regulator_disable(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_enable); + +/** + * regulator_bulk_disable - disable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to disable multiple regulator + * clients in a single API call. If any consumers cannot be enabled + * then any others that were disabled will be disabled again prior to + * return. + */ +int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) { + ret = regulator_disable(consumers[i].consumer); + if (ret != 0) + goto err; + } + + return 0; + +err: + printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); + for (i = 0; i < num_consumers; i++) + regulator_enable(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_disable); + +/** + * regulator_bulk_free - free multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * + * This convenience API allows consumers to free multiple regulator + * clients in a single API call. + */ +void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + + for (i = 0; i < num_consumers; i++) { + regulator_put(consumers[i].consumer); + consumers[i].consumer = NULL; + } +} +EXPORT_SYMBOL_GPL(regulator_bulk_free); + +/** + * regulator_notifier_call_chain - call regulator event notifier + * @regulator: regulator source + * @event: notifier block + * @data: + * + * Called by regulator drivers to notify clients a regulator event has + * occurred. We also notify regulator clients downstream. + */ +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + _notifier_call_chain(rdev, event, data); + return NOTIFY_DONE; + +} +EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); + +/** + * regulator_register - register regulator + * @regulator: regulator source + * @reg_data: private regulator data + * + * Called by regulator drivers to register a regulator. + * Returns 0 on success. + */ +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data) +{ + static atomic_t regulator_no = ATOMIC_INIT(0); + struct regulator_dev *rdev; + int ret; + + if (regulator_desc == NULL) + return ERR_PTR(-EINVAL); + + if (regulator_desc->name == NULL || regulator_desc->ops == NULL) + return ERR_PTR(-EINVAL); + + if (!regulator_desc->type == REGULATOR_VOLTAGE && + !regulator_desc->type == REGULATOR_CURRENT) + return ERR_PTR(-EINVAL); + + rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); + if (rdev == NULL) + return ERR_PTR(-ENOMEM); + + mutex_lock(®ulator_list_mutex); + + mutex_init(&rdev->mutex); + rdev->reg_data = reg_data; + rdev->owner = regulator_desc->owner; + rdev->desc = regulator_desc; + INIT_LIST_HEAD(&rdev->consumer_list); + INIT_LIST_HEAD(&rdev->supply_list); + INIT_LIST_HEAD(&rdev->list); + INIT_LIST_HEAD(&rdev->slist); + BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + + rdev->dev.class = ®ulator_class; + device_initialize(&rdev->dev); + snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), + "regulator_%ld_%s", + (unsigned long)atomic_inc_return(®ulator_no) - 1, + regulator_desc->name); + + ret = device_add(&rdev->dev); + if (ret == 0) + list_add(&rdev->list, ®ulator_list); + else { + kfree(rdev); + rdev = ERR_PTR(ret); + } + mutex_unlock(®ulator_list_mutex); + return rdev; +} +EXPORT_SYMBOL_GPL(regulator_register); + +/** + * regulator_unregister - unregister regulator + * @regulator: regulator source + * + * Called by regulator drivers to unregister a regulator. + */ +void regulator_unregister(struct regulator_dev *rdev) +{ + if (rdev == NULL) + return; + + mutex_lock(®ulator_list_mutex); + list_del(&rdev->list); + if (rdev->supply) + sysfs_remove_link(&rdev->dev.kobj, "supply"); + device_unregister(&rdev->dev); + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_unregister); + +/** + * regulator_set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +int regulator_set_supply(const char *regulator, const char *supply) +{ + struct regulator_dev *rdev, *supply_rdev; + int err; + + if (regulator == NULL || supply == NULL) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(rdev->desc->name, regulator)) + goto found_regulator; + } + mutex_unlock(®ulator_list_mutex); + return -ENODEV; + +found_regulator: + list_for_each_entry(supply_rdev, ®ulator_list, list) { + if (!strcmp(supply_rdev->desc->name, supply)) + goto found_supply; + } + mutex_unlock(®ulator_list_mutex); + return -ENODEV; + +found_supply: + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + mutex_unlock(®ulator_list_mutex); + return err; +} +EXPORT_SYMBOL_GPL(regulator_set_supply); + +/** + * regulator_get_supply - get regulator supply regulator + * @regulator: regulator name + * + * Returns the supply supply regulator name or NULL if no supply regulator + * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) + */ +const char *regulator_get_supply(const char *regulator) +{ + struct regulator_dev *rdev; + + if (regulator == NULL) + return NULL; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(rdev->desc->name, regulator)) + goto found; + } + mutex_unlock(®ulator_list_mutex); + return NULL; + +found: + mutex_unlock(®ulator_list_mutex); + if (rdev->supply) + return rdev->supply->desc->name; + else + return NULL; +} +EXPORT_SYMBOL_GPL(regulator_get_supply); + +/** + * regulator_set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +int regulator_set_machine_constraints(const char *regulator_name, + struct regulation_constraints *constraints) +{ + struct regulator_dev *rdev; + int ret = 0; + + if (regulator_name == NULL) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(regulator_name, rdev->desc->name)) + goto found; + } + ret = -ENODEV; + goto out; + +found: + mutex_lock(&rdev->mutex); + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + rdev->desc->ops->set_voltage) { + ret = rdev->desc->ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV" + " constraint\n", __func__, + rdev->constraints->min_uV); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) + ret = suspend_prepare(rdev, constraints->initial_state); + + print_constraints(rdev); + mutex_unlock(&rdev->mutex); + +out: + mutex_unlock(®ulator_list_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); + + +/** + * regulator_set_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply) +{ + struct regulator_map *node; + + if (regulator == NULL || supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = regulator; + node->dev = dev; + node->supply = supply; + + mutex_lock(®ulator_list_mutex); + list_add(&node->list, ®ulator_map_list); + mutex_unlock(®ulator_list_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(regulator_set_device_supply); + +/** + * regulator_suspend_prepare: prepare regulators for system wide suspend + * @state: system suspend state + * + * Configure each regulator with it's suspend operating parameters for state. + * This will usually be called by machine suspend code prior to supending. + */ +int regulator_suspend_prepare(suspend_state_t state) +{ + struct regulator_dev *rdev; + int ret = 0; + + /* ON is handled by regulator active state */ + if (state == PM_SUSPEND_ON) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + + mutex_lock(&rdev->mutex); + ret = suspend_prepare(rdev, state); + mutex_unlock(&rdev->mutex); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to prepare %s\n", + __func__, rdev->desc->name); + goto out; + } + } +out: + mutex_unlock(®ulator_list_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_suspend_prepare); + +/** + * rdev_get_drvdata - get rdev regulator driver data + * @regulator: regulator + * + * Get rdev regulator driver private data. This call can be used in the + * regulator driver context. + */ +void *rdev_get_drvdata(struct regulator_dev *rdev) +{ + return rdev->reg_data; +} +EXPORT_SYMBOL_GPL(rdev_get_drvdata); + +/** + * regulator_get_drvdata - get regulator driver data + * @regulator: regulator + * + * Get regulator driver private data. This call can be used in the consumer + * driver context when non API regulator specific functions need to be called. + */ +void *regulator_get_drvdata(struct regulator *regulator) +{ + return regulator->rdev->reg_data; +} +EXPORT_SYMBOL_GPL(regulator_get_drvdata); + +/** + * regulator_set_drvdata - set regulator driver data + * @regulator: regulator + * @data: data + */ +void regulator_set_drvdata(struct regulator *regulator, void *data) +{ + regulator->rdev->reg_data = data; +} +EXPORT_SYMBOL_GPL(regulator_set_drvdata); + +/** + * regulator_get_id - get regulator ID + * @regulator: regulator + */ +int rdev_get_id(struct regulator_dev *rdev) +{ + return rdev->desc->id; +} +EXPORT_SYMBOL_GPL(rdev_get_id); + +static int __init regulator_init(void) +{ + printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); + return class_register(®ulator_class); +} + +/* init early to allow our consumers to complete system booting */ +core_initcall(regulator_init); diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c new file mode 100644 index 000000000000..d31db3e14913 --- /dev/null +++ b/drivers/regulator/fixed.c @@ -0,0 +1,129 @@ +/* + * fixed.c + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This is useful for systems with mixed controllable and + * non-controllable regulators, as well as for allowing testing on + * systems with no controllable regulators. + */ + +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/fixed.h> + +struct fixed_voltage_data { + struct regulator_desc desc; + struct regulator_dev *dev; + int microvolts; +}; + +static int fixed_voltage_is_enabled(struct regulator_dev *dev) +{ + return 1; +} + +static int fixed_voltage_enable(struct regulator_dev *dev) +{ + return 0; +} + +static int fixed_voltage_get_voltage(struct regulator_dev *dev) +{ + struct fixed_voltage_data *data = rdev_get_drvdata(dev); + + return data->microvolts; +} + +static struct regulator_ops fixed_voltage_ops = { + .is_enabled = fixed_voltage_is_enabled, + .enable = fixed_voltage_enable, + .get_voltage = fixed_voltage_get_voltage, +}; + +static int regulator_fixed_voltage_probe(struct platform_device *pdev) +{ + struct fixed_voltage_config *config = pdev->dev.platform_data; + struct fixed_voltage_data *drvdata; + int ret; + + drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL); + if (drvdata == NULL) { + ret = -ENOMEM; + goto err; + } + + drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); + if (drvdata->desc.name == NULL) { + ret = -ENOMEM; + goto err; + } + drvdata->desc.type = REGULATOR_VOLTAGE; + drvdata->desc.owner = THIS_MODULE; + drvdata->desc.ops = &fixed_voltage_ops, + + drvdata->microvolts = config->microvolts; + + drvdata->dev = regulator_register(&drvdata->desc, drvdata); + if (IS_ERR(drvdata->dev)) { + ret = PTR_ERR(drvdata->dev); + goto err_name; + } + + platform_set_drvdata(pdev, drvdata); + + dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name, + drvdata->microvolts); + + return 0; + +err_name: + kfree(drvdata->desc.name); +err: + kfree(drvdata); + return ret; +} + +static int regulator_fixed_voltage_remove(struct platform_device *pdev) +{ + struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); + + regulator_unregister(drvdata->dev); + kfree(drvdata->desc.name); + kfree(drvdata); + + return 0; +} + +static struct platform_driver regulator_fixed_voltage_driver = { + .probe = regulator_fixed_voltage_probe, + .remove = regulator_fixed_voltage_remove, + .driver = { + .name = "reg-fixed-voltage", + }, +}; + +static int __init regulator_fixed_voltage_init(void) +{ + return platform_driver_register(®ulator_fixed_voltage_driver); +} +module_init(regulator_fixed_voltage_init); + +static void __exit regulator_fixed_voltage_exit(void) +{ + platform_driver_unregister(®ulator_fixed_voltage_driver); +} +module_exit(regulator_fixed_voltage_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("Fixed voltage regulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c new file mode 100644 index 000000000000..5ddb464b1c3f --- /dev/null +++ b/drivers/regulator/virtual.c @@ -0,0 +1,345 @@ +/* + * reg-virtual-consumer.c + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +struct virtual_consumer_data { + struct mutex lock; + struct regulator *regulator; + int enabled; + int min_uV; + int max_uV; + int min_uA; + int max_uA; + unsigned int mode; +}; + +static void update_voltage_constraints(struct virtual_consumer_data *data) +{ + int ret; + + if (data->min_uV && data->max_uV + && data->min_uV <= data->max_uV) { + ret = regulator_set_voltage(data->regulator, + data->min_uV, data->max_uV); + if (ret != 0) { + printk(KERN_ERR "regulator_set_voltage() failed: %d\n", + ret); + return; + } + } + + if (data->min_uV && data->max_uV && !data->enabled) { + ret = regulator_enable(data->regulator); + if (ret == 0) + data->enabled = 1; + else + printk(KERN_ERR "regulator_enable() failed: %d\n", + ret); + } + + if (!(data->min_uV && data->max_uV) && data->enabled) { + ret = regulator_disable(data->regulator); + if (ret == 0) + data->enabled = 0; + else + printk(KERN_ERR "regulator_disable() failed: %d\n", + ret); + } +} + +static void update_current_limit_constraints(struct virtual_consumer_data + *data) +{ + int ret; + + if (data->max_uA + && data->min_uA <= data->max_uA) { + ret = regulator_set_current_limit(data->regulator, + data->min_uA, data->max_uA); + if (ret != 0) { + pr_err("regulator_set_current_limit() failed: %d\n", + ret); + return; + } + } + + if (data->max_uA && !data->enabled) { + ret = regulator_enable(data->regulator); + if (ret == 0) + data->enabled = 1; + else + printk(KERN_ERR "regulator_enable() failed: %d\n", + ret); + } + + if (!(data->min_uA && data->max_uA) && data->enabled) { + ret = regulator_disable(data->regulator); + if (ret == 0) + data->enabled = 0; + else + printk(KERN_ERR "regulator_disable() failed: %d\n", + ret); + } +} + +static ssize_t show_min_uV(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->min_uV); +} + +static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->min_uV = val; + update_voltage_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_max_uV(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->max_uV); +} + +static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->max_uV = val; + update_voltage_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_min_uA(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->min_uA); +} + +static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->min_uA = val; + update_current_limit_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_max_uA(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->max_uA); +} + +static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->max_uA = val; + update_current_limit_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + + switch (data->mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + default: + return sprintf(buf, "unknown\n"); + } +} + +static ssize_t set_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + if (strncmp(buf, "fast", strlen("fast")) == 0) + mode = REGULATOR_MODE_FAST; + else if (strncmp(buf, "normal", strlen("normal")) == 0) + mode = REGULATOR_MODE_NORMAL; + else if (strncmp(buf, "idle", strlen("idle")) == 0) + mode = REGULATOR_MODE_IDLE; + else if (strncmp(buf, "standby", strlen("standby")) == 0) + mode = REGULATOR_MODE_STANDBY; + else { + dev_err(dev, "Configuring invalid mode\n"); + return count; + } + + mutex_lock(&data->lock); + ret = regulator_set_mode(data->regulator, mode); + if (ret == 0) + data->mode = mode; + else + dev_err(dev, "Failed to configure mode: %d\n", ret); + mutex_unlock(&data->lock); + + return count; +} + +static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV); +static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV); +static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA); +static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA); +static DEVICE_ATTR(mode, 0666, show_mode, set_mode); + +struct device_attribute *attributes[] = { + &dev_attr_min_microvolts, + &dev_attr_max_microvolts, + &dev_attr_min_microamps, + &dev_attr_max_microamps, + &dev_attr_mode, +}; + +static int regulator_virtual_consumer_probe(struct platform_device *pdev) +{ + char *reg_id = pdev->dev.platform_data; + struct virtual_consumer_data *drvdata; + int ret, i; + + drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL); + if (drvdata == NULL) { + ret = -ENOMEM; + goto err; + } + + mutex_init(&drvdata->lock); + + drvdata->regulator = regulator_get(&pdev->dev, reg_id); + if (IS_ERR(drvdata->regulator)) { + ret = PTR_ERR(drvdata->regulator); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(attributes); i++) { + ret = device_create_file(&pdev->dev, attributes[i]); + if (ret != 0) + goto err; + } + + drvdata->mode = regulator_get_mode(drvdata->regulator); + + platform_set_drvdata(pdev, drvdata); + + return 0; + +err: + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + kfree(drvdata); + return ret; +} + +static int regulator_virtual_consumer_remove(struct platform_device *pdev) +{ + struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + if (drvdata->enabled) + regulator_disable(drvdata->regulator); + regulator_put(drvdata->regulator); + + kfree(drvdata); + + return 0; +} + +static struct platform_driver regulator_virtual_consumer_driver = { + .probe = regulator_virtual_consumer_probe, + .remove = regulator_virtual_consumer_remove, + .driver = { + .name = "reg-virt-consumer", + }, +}; + + +static int __init regulator_virtual_consumer_init(void) +{ + return platform_driver_register(®ulator_virtual_consumer_driver); +} +module_init(regulator_virtual_consumer_init); + +static void __exit regulator_virtual_consumer_exit(void) +{ + platform_driver_unregister(®ulator_virtual_consumer_driver); +} +module_exit(regulator_virtual_consumer_exit); + +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("Virtual regulator consumer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index d397fa5f3a91..7af60b98d8a4 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (rtc->ops == NULL) err = -ENODEV; @@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 0a870b7e5c32..856cc1af40df 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -221,7 +221,7 @@ static long rtc_dev_ioctl(struct file *file, err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; /* check that the calling task has appropriate permissions * for certain ioctls. doing this check here is useful @@ -432,6 +432,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file) #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL clear_uie(rtc); #endif + rtc_irq_set_state(rtc, NULL, 0); + if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 2d8df0b30538..20676cdef4a5 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu, else search_unit_addr = uid->base_unit_addr; list_for_each_entry(pos, &lcu->grouplist, group) { - if (pos->uid.base_unit_addr == search_unit_addr) + if (pos->uid.base_unit_addr == search_unit_addr && + !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit))) return pos; }; return NULL; @@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu, group->uid.base_unit_addr = uid->real_unit_addr; else group->uid.base_unit_addr = uid->base_unit_addr; + memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit)); INIT_LIST_HEAD(&group->group); INIT_LIST_HEAD(&group->baselist); INIT_LIST_HEAD(&group->aliaslist); diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index d774e79476fe..cd3335c1c307 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL); #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\ - /* SSID */ 4 + 1 + /* unit addr */ 2 + 1) + /* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\ + /* vduit */ 32 + 1) static ssize_t dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) sprintf(ua_string, "%02x", uid->real_unit_addr); break; } - snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s", - uid->vendor, uid->serial, uid->ssid, ua_string); + if (strlen(uid->vduit) > 0) + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string, + uid->vduit); + else + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string); spin_unlock(&dasd_devmap_lock); return snprintf(buf, PAGE_SIZE, "%s\n", uid_string); } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 3590fdb5b2fd..773b3fe275b2 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk, memset(pfxdata, 0, sizeof(*pfxdata)); /* prefix data */ pfxdata->format = 0; - pfxdata->base_address = basepriv->conf_data.ned1.unit_addr; - pfxdata->base_lss = basepriv->conf_data.ned1.ID; + pfxdata->base_address = basepriv->ned->unit_addr; + pfxdata->base_lss = basepriv->ned->ID; pfxdata->validity.define_extend = 1; /* private uid is kept up to date, conf_data may be outdated */ @@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid) /* * Generate device unique id that specifies the physical device. */ -static int -dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) +static int dasd_eckd_generate_uid(struct dasd_device *device, + struct dasd_uid *uid) { struct dasd_eckd_private *private; - struct dasd_eckd_confdata *confdata; + int count; private = (struct dasd_eckd_private *) device->private; if (!private) return -ENODEV; - confdata = &private->conf_data; - if (!confdata) + if (!private->ned || !private->gneq) return -ENODEV; memset(uid, 0, sizeof(struct dasd_uid)); - memcpy(uid->vendor, confdata->ned1.HDA_manufacturer, + memcpy(uid->vendor, private->ned->HDA_manufacturer, sizeof(uid->vendor) - 1); EBCASC(uid->vendor, sizeof(uid->vendor) - 1); - memcpy(uid->serial, confdata->ned1.HDA_location, + memcpy(uid->serial, private->ned->HDA_location, sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); - uid->ssid = confdata->neq.subsystemID; - uid->real_unit_addr = confdata->ned1.unit_addr; - if (confdata->ned2.sneq.flags == 0x40 && - confdata->ned2.sneq.format == 0x0001) { - uid->type = confdata->ned2.sneq.sua_flags; + uid->ssid = private->gneq->subsystemID; + uid->real_unit_addr = private->ned->unit_addr;; + if (private->sneq) { + uid->type = private->sneq->sua_flags; if (uid->type == UA_BASE_PAV_ALIAS) - uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr; + uid->base_unit_addr = private->sneq->base_unit_addr; } else { uid->type = UA_BASE_DEVICE; } + if (private->vdsneq) { + for (count = 0; count < 16; count++) { + sprintf(uid->vduit+2*count, "%02x", + private->vdsneq->uit[count]); + } + } return 0; } @@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, ret = -ENOMEM; goto out_error; } + + /* + * buffer has to start with EBCDIC "V1.0" to show + * support for virtual device SNEQ + */ + rcd_buf[0] = 0xE5; + rcd_buf[1] = 0xF1; + rcd_buf[2] = 0x4B; + rcd_buf[3] = 0xF0; cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm); if (IS_ERR(cqr)) { ret = PTR_ERR(cqr); @@ -646,8 +659,62 @@ out_error: return ret; } -static int -dasd_eckd_read_conf(struct dasd_device *device) +static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private) +{ + + struct dasd_sneq *sneq; + int i, count; + + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + count = private->conf_len / sizeof(struct dasd_sneq); + sneq = (struct dasd_sneq *)private->conf_data; + for (i = 0; i < count; ++i) { + if (sneq->flags.identifier == 1 && sneq->format == 1) + private->sneq = sneq; + else if (sneq->flags.identifier == 1 && sneq->format == 4) + private->vdsneq = (struct vd_sneq *)sneq; + else if (sneq->flags.identifier == 2) + private->gneq = (struct dasd_gneq *)sneq; + else if (sneq->flags.identifier == 3 && sneq->res1 == 1) + private->ned = (struct dasd_ned *)sneq; + sneq++; + } + if (!private->ned || !private->gneq) { + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + return -EINVAL; + } + return 0; + +}; + +static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len) +{ + struct dasd_gneq *gneq; + int i, count, found; + + count = conf_len / sizeof(*gneq); + gneq = (struct dasd_gneq *)conf_data; + found = 0; + for (i = 0; i < count; ++i) { + if (gneq->flags.identifier == 2) { + found = 1; + break; + } + gneq++; + } + if (found) + return ((char *)gneq)[18] & 0x07; + else + return 0; +} + +static int dasd_eckd_read_conf(struct dasd_device *device) { void *conf_data; int conf_len, conf_data_saved; @@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->opm = ccw_device_get_path_mask(device->cdev); lpm = 0x80; conf_data_saved = 0; - /* get configuration data per operational path */ for (lpm = 0x80; lpm; lpm>>= 1) { if (lpm & path_data->opm){ @@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device) "data retrieved"); continue; /* no error */ } - if (conf_len != sizeof(struct dasd_eckd_confdata)) { - MESSAGE(KERN_WARNING, - "sizes of configuration data mismatch" - "%d (read) vs %ld (expected)", - conf_len, - sizeof(struct dasd_eckd_confdata)); - kfree(conf_data); - continue; /* no error */ - } /* save first valid configuration data */ - if (!conf_data_saved){ - memcpy(&private->conf_data, conf_data, - sizeof(struct dasd_eckd_confdata)); + if (!conf_data_saved) { + kfree(private->conf_data); + private->conf_data = conf_data; + private->conf_len = conf_len; + if (dasd_eckd_identify_conf_parts(private)) { + private->conf_data = NULL; + private->conf_len = 0; + kfree(conf_data); + continue; + } conf_data_saved++; } - switch (((char *)conf_data)[242] & 0x07){ + switch (dasd_eckd_path_access(conf_data, conf_len)) { case 0x02: path_data->npm |= lpm; break; @@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->ppm |= lpm; break; } - kfree(conf_data); + if (conf_data != private->conf_data) + kfree(conf_data); } } return 0; @@ -952,6 +1017,7 @@ out_err2: dasd_free_block(device->block); device->block = NULL; out_err1: + kfree(private->conf_data); kfree(device->private); device->private = NULL; return rc; @@ -959,7 +1025,17 @@ out_err1: static void dasd_eckd_uncheck_device(struct dasd_device *device) { + struct dasd_eckd_private *private; + + private = (struct dasd_eckd_private *) device->private; dasd_alias_disconnect_device_from_lcu(device); + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + private->conf_len = 0; + kfree(private->conf_data); + private->conf_data = NULL; } static struct dasd_ccw_req * @@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device, info->characteristics_size = sizeof(struct dasd_eckd_characteristics); memcpy(info->characteristics, &private->rdc_data, sizeof(struct dasd_eckd_characteristics)); - info->confdata_size = sizeof(struct dasd_eckd_confdata); - memcpy(info->configuration_data, &private->conf_data, - sizeof(struct dasd_eckd_confdata)); + info->confdata_size = min((unsigned long)private->conf_len, + sizeof(info->configuration_data)); + memcpy(info->configuration_data, private->conf_data, + info->confdata_size); return 0; } diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h index fc2509c939bc..4bf0aa5112c1 100644 --- a/drivers/s390/block/dasd_eckd.h +++ b/drivers/s390/block/dasd_eckd.h @@ -231,133 +231,62 @@ struct dasd_eckd_characteristics { __u8 reserved3[10]; } __attribute__ ((packed)); -struct dasd_eckd_confdata { +/* elements of the configuration data */ +struct dasd_ned { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 dev_class; - __u8 reserved; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char HDA_manufacturer[3]; - unsigned char HDA_location[2]; - unsigned char HDA_seqno[12]; - __u8 ID; - __u8 unit_addr; - } __attribute__ ((packed)) ned1; - union { - struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char DASD_manufacturer[3]; - unsigned char DASD_location[2]; - unsigned char DASD_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned; - struct { - unsigned char flags; /* byte 0 */ - unsigned char res1; /* byte 1 */ - __u16 format; /* byte 2-3 */ - unsigned char res2[4]; /* byte 4-7 */ - unsigned char sua_flags; /* byte 8 */ - __u8 base_unit_addr; /* byte 9 */ - unsigned char res3[22]; /* byte 10-31 */ - } __attribute__ ((packed)) sneq; - } __attribute__ ((packed)) ned2; + __u8 identifier:2; + __u8 token_id:1; + __u8 sno_valid:1; + __u8 subst_sno:1; + __u8 recNED:1; + __u8 emuNED:1; + __u8 reserved:1; + } __attribute__ ((packed)) flags; + __u8 descriptor; + __u8 dev_class; + __u8 reserved; + __u8 dev_type[6]; + __u8 dev_model[3]; + __u8 HDA_manufacturer[3]; + __u8 HDA_location[2]; + __u8 HDA_seqno[12]; + __u8 ID; + __u8 unit_addr; +} __attribute__ ((packed)); + +struct dasd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char cont_model[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned3; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 sua_flags; /* byte 8 */ + __u8 base_unit_addr; /* byte 9 */ + __u8 res3[22]; /* byte 10-31 */ +} __attribute__ ((packed)); + +struct vd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char empty[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned4; - unsigned char ned5[32]; - unsigned char ned6[32]; - unsigned char ned7[32]; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 uit[16]; /* byte 8-23 */ + __u8 res3[8]; /* byte 24-31 */ +} __attribute__ ((packed)); + +struct dasd_gneq { struct { - struct { - unsigned char identifier:2; - unsigned char reserved:6; - } __attribute__ ((packed)) flags; - __u8 selector; - __u16 interfaceID; - __u32 reserved; - __u16 subsystemID; - struct { - unsigned char sp0:1; - unsigned char sp1:1; - unsigned char reserved:5; - unsigned char scluster:1; - } __attribute__ ((packed)) spathID; - __u8 unit_address; - __u8 dev_ID; - __u8 dev_address; - __u8 adapterID; - __u16 link_address; - struct { - unsigned char parallel:1; - unsigned char escon:1; - unsigned char reserved:1; - unsigned char ficon:1; - unsigned char reserved2:4; - } __attribute__ ((packed)) protocol_type; - struct { - unsigned char PID_in_236:1; - unsigned char reserved:7; - } __attribute__ ((packed)) format_flags; - __u8 log_dev_address; - unsigned char reserved2[12]; - } __attribute__ ((packed)) neq; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 reserved[7]; + __u16 subsystemID; + __u8 reserved2[22]; } __attribute__ ((packed)); struct dasd_eckd_path { @@ -463,7 +392,14 @@ struct alias_pav_group { struct dasd_eckd_private { struct dasd_eckd_characteristics rdc_data; - struct dasd_eckd_confdata conf_data; + u8 *conf_data; + int conf_len; + /* pointers to specific parts in the conf_data */ + struct dasd_ned *ned; + struct dasd_sneq *sneq; + struct vd_sneq *vdsneq; + struct dasd_gneq *gneq; + struct dasd_eckd_path path_data; struct eckd_count count_area[5]; int init_cqr_status; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index fb2f931cf844..31ecaa4a40e4 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -307,6 +307,7 @@ struct dasd_uid { __u16 ssid; __u8 real_unit_addr; __u8 base_unit_addr; + char vduit[33]; }; /* diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 3c8b25e6c345..1fd8f2193ed8 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies) void sclp_sync_wait(void) { + unsigned long long old_tick; unsigned long flags; unsigned long cr0, cr0_sync; u64 timeout; @@ -419,11 +420,12 @@ sclp_sync_wait(void) if (!irq_context) local_bh_disable(); /* Enable service-signal interruption, disable timer interrupts */ + old_tick = local_tick_disable(); trace_hardirqs_on(); __ctl_store(cr0, 0, 0); cr0_sync = cr0; + cr0_sync &= 0xffff00a0; cr0_sync |= 0x00000200; - cr0_sync &= 0xFFFFF3AC; __ctl_load(cr0_sync, 0, 0); __raw_local_irq_stosm(0x01); /* Loop until driver state indicates finished request */ @@ -439,9 +441,9 @@ sclp_sync_wait(void) __ctl_load(cr0, 0, 0); if (!irq_context) _local_bh_enable(); + local_tick_enable(old_tick); local_irq_restore(flags); } - EXPORT_SYMBOL(sclp_sync_wait); /* Dispatch changes in send and receive mask to registered listeners. */ diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 0c2b77493db4..eb5f1b8bc57f 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb, sclp_attach_storage(id); switch (action) { case MEM_ONLINE: + case MEM_GOING_OFFLINE: + case MEM_CANCEL_OFFLINE: break; case MEM_GOING_ONLINE: rc = sclp_mem_change_state(start, size, 1); @@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb, case MEM_CANCEL_ONLINE: sclp_mem_change_state(start, size, 0); break; + case MEM_OFFLINE: + sclp_mem_change_state(start, size, 0); + break; default: rc = -EINVAL; break; diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c index fff4ff485d9b..4cebd6ee6d27 100644 --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -8,7 +8,6 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/cpu.h> -#include <linux/kthread.h> #include <linux/sysdev.h> #include <linux/workqueue.h> #include <asm/smp.h> @@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work) put_online_cpus(); } -static int sclp_cpu_kthread(void *data) -{ - smp_rescan_cpus(); - return 0; -} - static void __ref sclp_cpu_change_notify(struct work_struct *work) { - /* Can't call smp_rescan_cpus() from workqueue context since it may - * deadlock in case of cpu hotplug. So we have to create a kernel - * thread in order to call it. - */ - kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan"); + smp_rescan_cpus(); } static void sclp_conf_receiver_fn(struct evbuf_header *evbuf) diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index ef7bc0a125ef..cf8f24a4b5eb 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -5,7 +5,7 @@ * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com> */ -#include <linux/slab.h> +#include <linux/vmalloc.h> #include <linux/bitops.h> #include "idset.h" #include "css.h" @@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id) { struct idset *set; - set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id), - GFP_KERNEL); + set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id)); if (set) { set->num_ssid = num_ssid; set->num_id = num_id; + memset(set->bitmap, 0, bitmap_size(num_ssid, num_id)); } return set; } void idset_free(struct idset *set) { - kfree(set); + vfree(set); } void idset_clear(struct idset *set) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index d10c73cc1688..d15648514a0f 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1355,7 +1355,7 @@ int qdio_allocate(struct qdio_initialize *init_data) goto out_rel; /* qdr is used in ccw1.cda which is u32 */ - irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA); + irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!irq_ptr->qdr) goto out_rel; WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index ea01b85b1cc9..ec5c4a414235 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void) return 0; } -void __exit qdio_remove_perf_stats(void) +void qdio_remove_perf_stats(void) { #ifdef CONFIG_PROC_FS remove_proc_entry("qdio_perf", NULL); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index f0923a8aceda..1bd2a208db28 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr) kmem_cache_free(qdio_q_cache, q); } } - kfree(irq_ptr->qdr); + free_page((unsigned long) irq_ptr->qdr); free_page(irq_ptr->chsc_page); free_page((unsigned long) irq_ptr); } @@ -515,7 +515,7 @@ int __init qdio_setup_init(void) return 0; } -void __exit qdio_setup_exit(void) +void qdio_setup_exit(void) { kmem_cache_destroy(qdio_q_cache); } diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 79954bd6bfa5..292b60da6dc7 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } -void s390_virtio_console_init(void) +void __init s390_virtio_console_init(void) { virtio_cons_early_init(early_put_chars); } diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 1895dbb553cd..80971c21ea1a 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer { int next_element_to_fill; struct sk_buff_head skb_list; struct list_head ctx_list; + int is_header[16]; }; struct qeth_card; @@ -785,7 +786,7 @@ void qeth_core_remove_osn_attributes(struct device *); /* exports for qeth discipline device drivers */ extern struct qeth_card_list_struct qeth_core_card_list; - +extern struct kmem_cache *qeth_core_header_cache; extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS]; void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int); @@ -843,7 +844,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int); int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int); int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, - struct qeth_eddp_context *); + struct qeth_eddp_context *, int, int); int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, struct qeth_eddp_context *); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index cebb25e36e82..bd420d1b9a0d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -19,8 +19,8 @@ #include <linux/mii.h> #include <linux/kthread.h> -#include <asm-s390/ebcdic.h> -#include <asm-s390/io.h> +#include <asm/ebcdic.h> +#include <asm/io.h> #include <asm/s390_rdev.h> #include "qeth_core.h" @@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf); struct qeth_card_list_struct qeth_core_card_list; EXPORT_SYMBOL_GPL(qeth_core_card_list); +struct kmem_cache *qeth_core_header_cache; +EXPORT_SYMBOL_GPL(qeth_core_header_cache); static struct device *qeth_core_root_dev; static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY; @@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, } qeth_eddp_buf_release_contexts(buf); for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) { + if (buf->buffer->element[i].addr && buf->is_header[i]) + kmem_cache_free(qeth_core_header_cache, + buf->buffer->element[i].addr); + buf->is_header[i] = 0; buf->buffer->element[i].length = 0; buf->buffer->element[i].addr = NULL; buf->buffer->element[i].flags = 0; @@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, if (skb_shinfo(skb)->nr_frags > 0) elements_needed = (skb_shinfo(skb)->nr_frags + 1); if (elements_needed == 0) - elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) - + skb->len) >> PAGE_SHIFT); + elements_needed = 1 + (((((unsigned long) skb->data) % + PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", @@ -3015,7 +3021,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, EXPORT_SYMBOL_GPL(qeth_get_elements_no); static inline void __qeth_fill_buffer(struct sk_buff *skb, - struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill) + struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, + int offset) { int length = skb->len; int length_here; @@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, data = skb->data; first_lap = (is_tso == 0 ? 1 : 0); + if (offset >= 0) { + data = skb->data + offset; + first_lap = 0; + } + while (length > 0) { /* length_here is the remaining amount of data in this page */ length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); @@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, } static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, struct sk_buff *skb) + struct qeth_qdio_out_buffer *buf, struct sk_buff *skb, + struct qeth_hdr *hdr, int offset, int hd_len) { struct qdio_buffer *buffer; - struct qeth_hdr_tso *hdr; int flush_cnt = 0, hdr_len, large_send = 0; buffer = buf->buffer; atomic_inc(&skb->users); skb_queue_tail(&buf->skb_list, skb); - hdr = (struct qeth_hdr_tso *) skb->data; /*check first on TSO ....*/ - if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { + if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) { int element = buf->next_element_to_fill; - hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; + hdr_len = sizeof(struct qeth_hdr_tso) + + ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len; /*fill first buffer entry only with header information */ buffer->element[element].addr = skb->data; buffer->element[element].length = hdr_len; @@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, skb->len -= hdr_len; large_send = 1; } + + if (offset >= 0) { + int element = buf->next_element_to_fill; + buffer->element[element].addr = hdr; + buffer->element[element].length = sizeof(struct qeth_hdr) + + hd_len; + buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buf->is_header[element] = 1; + buf->next_element_to_fill++; + } + if (skb_shinfo(skb)->nr_frags == 0) __qeth_fill_buffer(skb, buffer, large_send, - (int *)&buf->next_element_to_fill); + (int *)&buf->next_element_to_fill, offset); else __qeth_fill_buffer_frag(skb, buffer, large_send, (int *)&buf->next_element_to_fill); @@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, int qeth_do_send_packet_fast(struct qeth_card *card, struct qeth_qdio_out_q *queue, struct sk_buff *skb, struct qeth_hdr *hdr, int elements_needed, - struct qeth_eddp_context *ctx) + struct qeth_eddp_context *ctx, int offset, int hd_len) { struct qeth_qdio_out_buffer *buffer; int buffers_needed = 0; @@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card, } atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); if (ctx == NULL) { - qeth_fill_buffer(queue, buffer, skb); + qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len); qeth_flush_buffers(queue, index, 1); } else { flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); @@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, } } if (ctx == NULL) - tmp = qeth_fill_buffer(queue, buffer, skb); + tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0); else { tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); @@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void) rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0; if (rc) goto register_err; - return 0; + qeth_core_header_cache = kmem_cache_create("qeth_hdr", + sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL); + if (!qeth_core_header_cache) { + rc = -ENOMEM; + goto slab_err; + } + + return 0; +slab_err: + s390_root_dev_unregister(qeth_core_root_dev); register_err: driver_remove_file(&qeth_core_ccwgroup_driver.driver, &driver_attr_group); @@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void) &driver_attr_group); ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); ccw_driver_unregister(&qeth_ccw_driver); + kmem_cache_destroy(qeth_core_header_cache); qeth_unregister_dbf_views(); PRINT_INFO("core functions removed\n"); } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index a8b069cd9a4c..b3cee032f578 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -243,8 +243,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card, static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, struct sk_buff *skb, int ipv, int cast_type) { - struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) + - QETH_HEADER_SIZE); + struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb); memset(hdr, 0, sizeof(struct qeth_hdr)); hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2; @@ -621,6 +620,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; + int elements_needed = 0; + int hd_len = 0; if ((card->state != CARD_STATE_UP) || !card->lan_online) { card->stats.tx_carrier_errors++; @@ -643,13 +645,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (card->info.type == QETH_CARD_TYPE_OSN) hdr = (struct qeth_hdr *)skb->data; else { - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr)); - if (!new_skb) - goto tx_drop; - hdr = (struct qeth_hdr *)skb_push(new_skb, + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hd_len = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, + GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + skb_reset_mac_header(new_skb); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + hdr->hdr.l2.pkt_length = new_skb->len; + memcpy(((char *)hdr) + sizeof(struct qeth_hdr), + skb_mac_header(new_skb), ETH_HLEN); + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, + sizeof(struct qeth_hdr)); + if (!new_skb) + goto tx_drop; + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + skb_set_mac_header(new_skb, sizeof(struct qeth_hdr)); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -660,9 +681,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_drop; } } else { - elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0); - if (!elements) + elements = qeth_get_elements_no(card, (void *)hdr, new_skb, + elements_needed); + if (!elements) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } } if ((large_send == QETH_LARGE_SEND_NO) && @@ -674,7 +699,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements, ctx); + elements, ctx, data_offset, hd_len); if (!rc) { card->stats.tx_packets++; card->stats.tx_bytes += tx_bytes; @@ -701,6 +726,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 3e1d13857350..dd72c3c20165 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; if ((card->info.type == QETH_CARD_TYPE_IQD) && (skb->protocol != htons(ETH_P_IPV6)) && @@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) card->perf_stats.outbound_start_time = qeth_get_micros(); } - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + - VLAN_HLEN); - if (!new_skb) - goto tx_drop; + if (skb_is_gso(skb)) + large_send = card->options.large_send; + + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + + VLAN_HLEN); + if (!new_skb) + goto tx_drop; + } if (card->info.type == QETH_CARD_TYPE_IQD) { - skb_pull(new_skb, ETH_HLEN); + if (data_offset < 0) + skb_pull(new_skb, ETH_HLEN); } else { if (new_skb->protocol == htons(ETH_P_IP)) { if (card->dev->type == ARPHRD_IEEE802_TR) @@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); - if (skb_is_gso(new_skb)) - large_send = card->options.large_send; - /* fix hardware limitation: as long as we do not have sbal * chaining we can not send long frag lists so we temporary * switch to EDDP @@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) qeth_tso_fill_header(card, hdr, new_skb); elements_needed++; } else { - hdr = (struct qeth_hdr *)skb_push(new_skb, + if (data_offset < 0) { + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type); + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + } else { + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + hdr->hdr.l3.length = new_skb->len - data_offset; + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } else { int elems = qeth_get_elements_no(card, (void *)hdr, new_skb, elements_needed); - if (!elems) + if (!elems) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } elements_needed += elems; } @@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements_needed, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements_needed, ctx); + elements_needed, ctx, data_offset, 0); if (!rc) { card->stats.tx_packets++; @@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a97f1ae11f78..342e12fb1c25 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock(&up->port.lock); + spin_lock_irqsave(&up->port.lock, flags); if (up->port.flags & UPF_SHARE_IRQ) disable_irq_nosync(up->port.irq); @@ -1901,7 +1901,7 @@ static int serial8250_startup(struct uart_port *port) if (up->port.flags & UPF_SHARE_IRQ) enable_irq(up->port.irq); - spin_unlock(&up->port.lock); + spin_unlock_irqrestore(&up->port.lock, flags); /* * If the interrupt is not reasserted, setup a timer to diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3a0bbbe17aa3..7e7383e890d8 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o -obj-$(CONFIG_V850E_UART) += v850e_uart.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o obj-$(CONFIG_SERIAL_DZ) += dz.o diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5c76e0ae0582..7274b527a3c1 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -50,6 +50,15 @@ #define SCC_WAIT_CLOSING 100 +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + struct uart_cpm_port { struct uart_port port; u16 rx_nrfifos; @@ -68,6 +77,7 @@ struct uart_cpm_port { unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); + struct clk *clk; u8 brg; uint dp_addr; void *mem_addr; @@ -82,6 +92,7 @@ struct uart_cpm_port { int wait_closing; /* value to combine with opcode to form cpm command */ u32 command; + int gpios[NUM_GPIOS]; }; extern int cpm_uart_nr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a4f86927a74b..25efca5a7a1f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -43,6 +43,9 @@ #include <linux/dma-mapping.h> #include <linux/fs_uart_pd.h> #include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/clk.h> #include <asm/io.h> #include <asm/irq.h> @@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port) static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Whee. Do nothing. */ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); } static unsigned int cpm_uart_get_mctrl(struct uart_port *port) { - /* Whee. Do nothing. */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; } /* @@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port, out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } - cpm_set_brg(pinfo->brg - 1, baud); + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np, void __iomem *mem, *pram; int len; int ret; + int i; - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; } - pinfo->brg = *data; data = of_get_property(np, "fsl,cpm-command", &len); if (!data || len != 4) { @@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + return cpm_uart_request_port(&pinfo->port); out_pram: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index cd728df6a01a..8a0749e34ca3 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -451,19 +451,21 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7763) -/* SH7763 SCIF2 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) -#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7722) diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c deleted file mode 100644 index 5acf061b6cd2..000000000000 --- a/drivers/serial/v850e_uart.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* This driver supports both the original V850E UART interface (called - merely `UART' in the docs) and the newer `UARTB' interface, which is - roughly a superset of the first one. The selection is made at - configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is - presumed, otherwise the old UART -- as these are on-CPU UARTS, a system - can never have both. - - The UARTB interface also has a 16-entry FIFO mode, which is not - yet supported by this driver. */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/console.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_core.h> - -#include <asm/v850e_uart.h> - -/* Initial UART state. This may be overridden by machine-dependent headers. */ -#ifndef V850E_UART_INIT_BAUD -#define V850E_UART_INIT_BAUD 115200 -#endif -#ifndef V850E_UART_INIT_CFLAGS -#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD) -#endif - -/* A string used for prefixing printed descriptions; since the same UART - macro is actually used on other chips than the V850E. This must be a - constant string. */ -#ifndef V850E_UART_CHIP_NAME -#define V850E_UART_CHIP_NAME "V850E" -#endif - -#define V850E_UART_MINOR_BASE 64 /* First tty minor number */ - - -/* Low-level UART functions. */ - -/* Configure and turn on uart channel CHAN, using the termios `control - modes' bits in CFLAGS, and a baud-rate of BAUD. */ -void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud) -{ - int flags; - v850e_uart_speed_t old_speed; - v850e_uart_config_t old_config; - v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud); - v850e_uart_config_t new_config = v850e_uart_calc_config (cflags); - - /* Disable interrupts while we're twiddling the hardware. */ - local_irq_save (flags); - -#ifdef V850E_UART_PRE_CONFIGURE - V850E_UART_PRE_CONFIGURE (chan, cflags, baud); -#endif - - old_config = V850E_UART_CONFIG (chan); - old_speed = v850e_uart_speed (chan); - - if (! v850e_uart_speed_eq (old_speed, new_speed)) { - /* The baud rate has changed. First, disable the UART. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI; - old_config = 0; /* Force the uart to be re-initialized. */ - - /* Reprogram the baud-rate generator. */ - v850e_uart_set_speed (chan, new_speed); - } - - if (! (old_config & V850E_UART_CONFIG_ENABLED)) { - /* If we are using the uart for the first time, start by - enabling it, which must be done before turning on any - other bits. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT; - /* See the initial state. */ - old_config = V850E_UART_CONFIG (chan); - } - - if (new_config != old_config) { - /* Which of the TXE/RXE bits we'll temporarily turn off - before changing other control bits. */ - unsigned temp_disable = 0; - /* Which of the TXE/RXE bits will be enabled. */ - unsigned enable = 0; - unsigned changed_bits = new_config ^ old_config; - - /* Which of RX/TX will be enabled in the new configuration. */ - if (new_config & V850E_UART_CONFIG_RX_BITS) - enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE); - if (new_config & V850E_UART_CONFIG_TX_BITS) - enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE); - - /* Figure out which of RX/TX needs to be disabled; note - that this will only happen if they're not already - disabled. */ - if (changed_bits & V850E_UART_CONFIG_RX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_RX_ENABLE); - if (changed_bits & V850E_UART_CONFIG_TX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_TX_ENABLE); - - /* We have to turn off RX and/or TX mode before changing - any associated control bits. */ - if (temp_disable) - V850E_UART_CONFIG (chan) = old_config & ~temp_disable; - - /* Write the new control bits, while RX/TX are disabled. */ - if (changed_bits & ~enable) - V850E_UART_CONFIG (chan) = new_config & ~enable; - - v850e_uart_config_delay (new_config, new_speed); - - /* Write the final version, with enable bits turned on. */ - V850E_UART_CONFIG (chan) = new_config; - } - - local_irq_restore (flags); -} - - -/* Low-level console. */ - -#ifdef CONFIG_V850E_UART_CONSOLE - -static void v850e_uart_cons_write (struct console *co, - const char *s, unsigned count) -{ - if (count > 0) { - unsigned chan = co->index; - unsigned irq = V850E_UART_TX_IRQ (chan); - int irq_was_enabled, irq_was_pending, flags; - - /* We don't want to get `transmission completed' - interrupts, since we're busy-waiting, so we disable them - while sending (we don't disable interrupts entirely - because sending over a serial line is really slow). We - save the status of the tx interrupt and restore it when - we're done so that using printk doesn't interfere with - normal serial transmission (other than interleaving the - output, of course!). This should work correctly even if - this function is interrupted and the interrupt printks - something. */ - - /* Disable interrupts while fiddling with tx interrupt. */ - local_irq_save (flags); - /* Get current tx interrupt status. */ - irq_was_enabled = v850e_intc_irq_enabled (irq); - irq_was_pending = v850e_intc_irq_pending (irq); - /* Disable tx interrupt if necessary. */ - if (irq_was_enabled) - v850e_intc_disable_irq (irq); - /* Turn interrupts back on. */ - local_irq_restore (flags); - - /* Send characters. */ - while (count > 0) { - int ch = *s++; - - if (ch == '\n') { - /* We don't have the benefit of a tty - driver, so translate NL into CR LF. */ - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, '\r'); - } - - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, ch); - - count--; - } - - /* Restore saved tx interrupt status. */ - if (irq_was_enabled) { - /* Wait for the last character we sent to be - completely transmitted (as we'll get an - interrupt interrupt at that point). */ - v850e_uart_wait_for_xmit_done (chan); - /* Clear pending interrupts received due - to our transmission, unless there was already - one pending, in which case we want the - handler to be called. */ - if (! irq_was_pending) - v850e_intc_clear_pending_irq (irq); - /* ... and then turn back on handling. */ - v850e_intc_enable_irq (irq); - } - } -} - -extern struct uart_driver v850e_uart_driver; -static struct console v850e_uart_cons = -{ - .name = "ttyS", - .write = v850e_uart_cons_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .cflag = V850E_UART_INIT_CFLAGS, - .index = -1, - .data = &v850e_uart_driver, -}; - -void v850e_uart_cons_init (unsigned chan) -{ - v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS, - V850E_UART_INIT_BAUD); - v850e_uart_cons.index = chan; - register_console (&v850e_uart_cons); - printk ("Console: %s on-chip UART channel %d\n", - V850E_UART_CHIP_NAME, chan); -} - -/* This is what the init code actually calls. */ -static int v850e_uart_console_init (void) -{ - v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL); - return 0; -} -console_initcall(v850e_uart_console_init); - -#define V850E_UART_CONSOLE &v850e_uart_cons - -#else /* !CONFIG_V850E_UART_CONSOLE */ -#define V850E_UART_CONSOLE 0 -#endif /* CONFIG_V850E_UART_CONSOLE */ - -/* TX/RX interrupt handlers. */ - -static void v850e_uart_stop_tx (struct uart_port *port); - -void v850e_uart_tx (struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - int stopped = uart_tx_stopped (port); - - if (v850e_uart_xmit_ok (port->line)) { - int tx_ch; - - if (port->x_char) { - tx_ch = port->x_char; - port->x_char = 0; - } else if (!uart_circ_empty (xmit) && !stopped) { - tx_ch = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else - goto no_xmit; - - v850e_uart_putc (port->line, tx_ch); - port->icount.tx++; - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - } - - no_xmit: - if (uart_circ_empty (xmit) || stopped) - v850e_uart_stop_tx (port, stopped); -} - -static irqreturn_t v850e_uart_tx_irq(int irq, void *data) -{ - struct uart_port *port = data; - v850e_uart_tx (port); - return IRQ_HANDLED; -} - -static irqreturn_t v850e_uart_rx_irq(int irq, void *data) -{ - struct uart_port *port = data; - unsigned ch_stat = TTY_NORMAL; - unsigned ch = v850e_uart_getc (port->line); - unsigned err = v850e_uart_err (port->line); - - if (err) { - if (err & V850E_UART_ERR_OVERRUN) { - ch_stat = TTY_OVERRUN; - port->icount.overrun++; - } else if (err & V850E_UART_ERR_FRAME) { - ch_stat = TTY_FRAME; - port->icount.frame++; - } else if (err & V850E_UART_ERR_PARITY) { - ch_stat = TTY_PARITY; - port->icount.parity++; - } - } - - port->icount.rx++; - - tty_insert_flip_char (port->info->port.tty, ch, ch_stat); - tty_schedule_flip (port->info->port.tty); - - return IRQ_HANDLED; -} - - -/* Control functions for the serial framework. */ - -static void v850e_uart_nop (struct uart_port *port) { } -static int v850e_uart_success (struct uart_port *port) { return 0; } - -static unsigned v850e_uart_tx_empty (struct uart_port *port) -{ - return TIOCSER_TEMT; /* Can't detect. */ -} - -static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl) -{ -#ifdef V850E_UART_SET_RTS - V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS)); -#endif -} - -static unsigned v850e_uart_get_mctrl (struct uart_port *port) -{ - /* We don't support DCD or DSR, so consider them permanently active. */ - int mctrl = TIOCM_CAR | TIOCM_DSR; - - /* We may support CTS. */ -#ifdef V850E_UART_CTS - mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0; -#else - mctrl |= TIOCM_CTS; -#endif - - return mctrl; -} - -static void v850e_uart_start_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); - v850e_uart_tx (port); - v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_stop_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_start_rx (struct uart_port *port) -{ - v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_stop_rx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl) -{ - /* Umm, do this later. */ -} - -static int v850e_uart_startup (struct uart_port *port) -{ - int err; - - /* Alloc RX irq. */ - err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) - return err; - - /* Alloc TX irq. */ - err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) { - free_irq (V850E_UART_RX_IRQ (port->line), port); - return err; - } - - v850e_uart_start_rx (port); - - return 0; -} - -static void v850e_uart_shutdown (struct uart_port *port) -{ - /* Disable port interrupts. */ - free_irq (V850E_UART_TX_IRQ (port->line), port); - free_irq (V850E_UART_RX_IRQ (port->line), port); - - /* Turn off xmit/recv enable bits. */ - V850E_UART_CONFIG (port->line) - &= ~(V850E_UART_CONFIG_TX_ENABLE - | V850E_UART_CONFIG_RX_ENABLE); - /* Then reset the channel. */ - V850E_UART_CONFIG (port->line) = 0; -} - -static void -v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned cflags = termios->c_cflag; - - /* Restrict flags to legal values. */ - if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8) - /* The new value of CSIZE is invalid, use the old value. */ - cflags = (cflags & ~CSIZE) - | (old ? (old->c_cflag & CSIZE) : CS8); - - termios->c_cflag = cflags; - - v850e_uart_configure (port->line, cflags, - uart_get_baud_rate (port, termios, old, - v850e_uart_min_baud(), - v850e_uart_max_baud())); -} - -static const char *v850e_uart_type (struct uart_port *port) -{ - return port->type == PORT_V850E_UART ? "v850e_uart" : 0; -} - -static void v850e_uart_config_port (struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_V850E_UART; -} - -static int -v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART) - return -EINVAL; - if (ser->irq != V850E_UART_TX_IRQ (port->line)) - return -EINVAL; - return 0; -} - -static struct uart_ops v850e_uart_ops = { - .tx_empty = v850e_uart_tx_empty, - .get_mctrl = v850e_uart_get_mctrl, - .set_mctrl = v850e_uart_set_mctrl, - .start_tx = v850e_uart_start_tx, - .stop_tx = v850e_uart_stop_tx, - .stop_rx = v850e_uart_stop_rx, - .enable_ms = v850e_uart_nop, - .break_ctl = v850e_uart_break_ctl, - .startup = v850e_uart_startup, - .shutdown = v850e_uart_shutdown, - .set_termios = v850e_uart_set_termios, - .type = v850e_uart_type, - .release_port = v850e_uart_nop, - .request_port = v850e_uart_success, - .config_port = v850e_uart_config_port, - .verify_port = v850e_uart_verify_port, -}; - -/* Initialization and cleanup. */ - -static struct uart_driver v850e_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "v850e_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = V850E_UART_MINOR_BASE, - .nr = V850E_UART_NUM_CHANNELS, - .cons = V850E_UART_CONSOLE, -}; - - -static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS]; - -static int __init v850e_uart_init (void) -{ - int rval; - - printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME); - - rval = uart_register_driver (&v850e_uart_driver); - if (rval == 0) { - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) { - struct uart_port *port = &v850e_uart_ports[chan]; - - memset (port, 0, sizeof *port); - - port->ops = &v850e_uart_ops; - port->line = chan; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - - /* We actually use multiple IRQs, but the serial - framework seems to mainly use this for - informational purposes anyway. Here we use the TX - irq. */ - port->irq = V850E_UART_TX_IRQ (chan); - - /* The serial framework doesn't really use these - membase/mapbase fields for anything useful, but - it requires that they be something non-zero to - consider the port `valid', and also uses them - for informational purposes. */ - port->membase = (void *)V850E_UART_BASE_ADDR (chan); - port->mapbase = V850E_UART_BASE_ADDR (chan); - - /* The framework insists on knowing the uart's master - clock freq, though it doesn't seem to do anything - useful for us with it. We must make it at least - higher than (the maximum baud rate * 16), otherwise - the framework will puke during its internal - calculations, and force the baud rate to be 9600. - To be accurate though, just repeat the calculation - we use when actually setting the speed. */ - port->uartclk = v850e_uart_max_clock() * 16; - - uart_add_one_port (&v850e_uart_driver, port); - } - } - - return rval; -} - -static void __exit v850e_uart_exit (void) -{ - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) - uart_remove_one_port (&v850e_uart_driver, - &v850e_uart_ports[chan]); - - uart_unregister_driver (&v850e_uart_driver); -} - -module_init (v850e_uart_init); -module_exit (v850e_uart_exit); - -MODULE_AUTHOR ("Miles Bader"); -MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART"); -MODULE_LICENSE ("GPL"); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 617efb1640b1..be97789fa5fd 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -24,13 +24,12 @@ #include <linux/slab.h> #include <linux/maple.h> #include <linux/dma-mapping.h> +#include <linux/delay.h> #include <asm/cacheflush.h> #include <asm/dma.h> #include <asm/io.h> -#include <asm/mach/dma.h> -#include <asm/mach/sysasic.h> -#include <asm/mach/maple.h> -#include <linux/delay.h> +#include <mach/dma.h> +#include <mach/sysasic.h> MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin"); MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); @@ -46,14 +45,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler); static LIST_HEAD(maple_waitq); static LIST_HEAD(maple_sentq); -static DEFINE_MUTEX(maple_list_lock); +/* mutex to protect queue of waiting packets */ +static DEFINE_MUTEX(maple_wlist_lock); static struct maple_driver maple_dummy_driver; static struct device maple_bus; static int subdevice_map[MAPLE_PORTS]; static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; static unsigned long maple_pnp_time; -static int started, scanning, liststatus, fullscan; +static int started, scanning, fullscan; static struct kmem_cache *maple_queue_cache; struct maple_device_specify { @@ -129,35 +129,124 @@ static void maple_release_device(struct device *dev) kfree(mdev); } -/** +/* * maple_add_packet - add a single instruction to the queue - * @mq: instruction to add to waiting queue + * @mdev - maple device + * @function - function on device being queried + * @command - maple command to add + * @length - length of command string (in 32 bit words) + * @data - remainder of command string */ -void maple_add_packet(struct mapleq *mq) +int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, + size_t length, void *data) { - mutex_lock(&maple_list_lock); - list_add(&mq->list, &maple_waitq); - mutex_unlock(&maple_list_lock); + int locking, ret = 0; + void *sendbuf = NULL; + + mutex_lock(&maple_wlist_lock); + /* bounce if device already locked */ + locking = mutex_is_locked(&mdev->mq->mutex); + if (locking) { + ret = -EBUSY; + goto out; + } + + mutex_lock(&mdev->mq->mutex); + + if (length) { + sendbuf = kmalloc(length * 4, GFP_KERNEL); + if (!sendbuf) { + mutex_unlock(&mdev->mq->mutex); + ret = -ENOMEM; + goto out; + } + ((__be32 *)sendbuf)[0] = cpu_to_be32(function); + } + + mdev->mq->command = command; + mdev->mq->length = length; + if (length > 1) + memcpy(sendbuf + 4, data, (length - 1) * 4); + mdev->mq->sendbuf = sendbuf; + + list_add(&mdev->mq->list, &maple_waitq); +out: + mutex_unlock(&maple_wlist_lock); + return ret; } EXPORT_SYMBOL_GPL(maple_add_packet); +/* + * maple_add_packet_sleeps - add a single instruction to the queue + * - waits for lock to be free + * @mdev - maple device + * @function - function on device being queried + * @command - maple command to add + * @length - length of command string (in 32 bit words) + * @data - remainder of command string + */ +int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, + u32 command, size_t length, void *data) +{ + int locking, ret = 0; + void *sendbuf = NULL; + + locking = mutex_lock_interruptible(&mdev->mq->mutex); + if (locking) { + ret = -EIO; + goto out; + } + + if (length) { + sendbuf = kmalloc(length * 4, GFP_KERNEL); + if (!sendbuf) { + mutex_unlock(&mdev->mq->mutex); + ret = -ENOMEM; + goto out; + } + ((__be32 *)sendbuf)[0] = cpu_to_be32(function); + } + + mdev->mq->command = command; + mdev->mq->length = length; + if (length > 1) + memcpy(sendbuf + 4, data, (length - 1) * 4); + mdev->mq->sendbuf = sendbuf; + + mutex_lock(&maple_wlist_lock); + list_add(&mdev->mq->list, &maple_waitq); + mutex_unlock(&maple_wlist_lock); +out: + return ret; +} +EXPORT_SYMBOL_GPL(maple_add_packet_sleeps); + static struct mapleq *maple_allocq(struct maple_device *mdev) { struct mapleq *mq; mq = kmalloc(sizeof(*mq), GFP_KERNEL); if (!mq) - return NULL; + goto failed_nomem; mq->dev = mdev; mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL); mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp); - if (!mq->recvbuf) { - kfree(mq); - return NULL; - } + if (!mq->recvbuf) + goto failed_p2; + /* + * most devices do not need the mutex - but + * anything that injects block reads or writes + * will rely on it + */ + mutex_init(&mq->mutex); return mq; + +failed_p2: + kfree(mq); +failed_nomem: + return NULL; } static struct maple_device *maple_alloc_dev(int port, int unit) @@ -178,7 +267,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit) } mdev->dev.bus = &maple_bus_type; mdev->dev.parent = &maple_bus; - mdev->function = 0; return mdev; } @@ -216,7 +304,6 @@ static void maple_build_block(struct mapleq *mq) *maple_sendptr++ = PHYSADDR(mq->recvbuf); *maple_sendptr++ = mq->command | (to << 8) | (from << 16) | (len << 24); - while (len-- > 0) *maple_sendptr++ = *lsendbuf++; } @@ -224,22 +311,27 @@ static void maple_build_block(struct mapleq *mq) /* build up command queue */ static void maple_send(void) { - int i; - int maple_packets; + int i, maple_packets = 0; struct mapleq *mq, *nmq; if (!list_empty(&maple_sentq)) return; - if (list_empty(&maple_waitq) || !maple_dma_done()) + mutex_lock(&maple_wlist_lock); + if (list_empty(&maple_waitq) || !maple_dma_done()) { + mutex_unlock(&maple_wlist_lock); return; - maple_packets = 0; - maple_sendptr = maple_lastptr = maple_sendbuf; + } + mutex_unlock(&maple_wlist_lock); + maple_lastptr = maple_sendbuf; + maple_sendptr = maple_sendbuf; + mutex_lock(&maple_wlist_lock); list_for_each_entry_safe(mq, nmq, &maple_waitq, list) { maple_build_block(mq); list_move(&mq->list, &maple_sentq); if (maple_packets++ > MAPLE_MAXPACKETS) break; } + mutex_unlock(&maple_wlist_lock); if (maple_packets > 0) { for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++) dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE, @@ -247,7 +339,8 @@ static void maple_send(void) } } -static int attach_matching_maple_driver(struct device_driver *driver, +/* check if there is a driver registered likely to match this device */ +static int check_matching_maple_driver(struct device_driver *driver, void *devptr) { struct maple_driver *maple_drv; @@ -255,12 +348,8 @@ static int attach_matching_maple_driver(struct device_driver *driver, mdev = devptr; maple_drv = to_maple_driver(driver); - if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) { - if (maple_drv->connect(mdev) == 0) { - mdev->driver = maple_drv; - return 1; - } - } + if (mdev->devinfo.function & cpu_to_be32(maple_drv->function)) + return 1; return 0; } @@ -268,11 +357,6 @@ static void maple_detach_driver(struct maple_device *mdev) { if (!mdev) return; - if (mdev->driver) { - if (mdev->driver->disconnect) - mdev->driver->disconnect(mdev); - } - mdev->driver = NULL; device_unregister(&mdev->dev); mdev = NULL; } @@ -328,8 +412,8 @@ static void maple_attach_driver(struct maple_device *mdev) mdev->port, mdev->unit, function); matched = - bus_for_each_drv(&maple_bus_type, NULL, mdev, - attach_matching_maple_driver); + bus_for_each_drv(&maple_bus_type, NULL, mdev, + check_matching_maple_driver); if (matched == 0) { /* Driver does not exist yet */ @@ -373,45 +457,48 @@ static int detach_maple_device(struct device *device, void *portptr) static int setup_maple_commands(struct device *device, void *ignored) { + int add; struct maple_device *maple_dev = to_maple_dev(device); if ((maple_dev->interval > 0) && time_after(jiffies, maple_dev->when)) { - maple_dev->when = jiffies + maple_dev->interval; - maple_dev->mq->command = MAPLE_COMMAND_GETCOND; - maple_dev->mq->sendbuf = &maple_dev->function; - maple_dev->mq->length = 1; - maple_add_packet(maple_dev->mq); - liststatus++; + /* bounce if we cannot lock */ + add = maple_add_packet(maple_dev, + be32_to_cpu(maple_dev->devinfo.function), + MAPLE_COMMAND_GETCOND, 1, NULL); + if (!add) + maple_dev->when = jiffies + maple_dev->interval; } else { - if (time_after(jiffies, maple_pnp_time)) { - maple_dev->mq->command = MAPLE_COMMAND_DEVINFO; - maple_dev->mq->length = 0; - maple_add_packet(maple_dev->mq); - liststatus++; - } + if (time_after(jiffies, maple_pnp_time)) + /* This will also bounce */ + maple_add_packet(maple_dev, 0, + MAPLE_COMMAND_DEVINFO, 0, NULL); } - return 0; } /* VBLANK bottom half - implemented via workqueue */ static void maple_vblank_handler(struct work_struct *work) { - if (!maple_dma_done()) - return; - if (!list_empty(&maple_sentq)) + if (!list_empty(&maple_sentq) || !maple_dma_done()) return; + ctrl_outl(0, MAPLE_ENABLE); - liststatus = 0; + bus_for_each_dev(&maple_bus_type, NULL, NULL, setup_maple_commands); + if (time_after(jiffies, maple_pnp_time)) maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL; - if (liststatus && list_empty(&maple_sentq)) { - INIT_LIST_HEAD(&maple_sentq); + + mutex_lock(&maple_wlist_lock); + if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) { + mutex_unlock(&maple_wlist_lock); maple_send(); + } else { + mutex_unlock(&maple_wlist_lock); } + maplebus_dma_reset(); } @@ -422,8 +509,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) struct maple_device *mdev_add; struct maple_device_specify ds; + ds.port = mdev->port; for (k = 0; k < 5; k++) { - ds.port = mdev->port; ds.unit = k + 1; retval = bus_for_each_dev(&maple_bus_type, NULL, &ds, @@ -437,9 +524,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) mdev_add = maple_alloc_dev(mdev->port, k + 1); if (!mdev_add) return; - mdev_add->mq->command = MAPLE_COMMAND_DEVINFO; - mdev_add->mq->length = 0; - maple_add_packet(mdev_add->mq); + maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO, + 0, NULL); + /* mark that we are checking sub devices */ scanning = 1; } submask = submask >> 1; @@ -505,6 +592,28 @@ static void maple_response_devinfo(struct maple_device *mdev, } } +static void maple_port_rescan(void) +{ + int i; + struct maple_device *mdev; + + fullscan = 1; + for (i = 0; i < MAPLE_PORTS; i++) { + if (checked[i] == false) { + fullscan = 0; + mdev = baseunits[i]; + /* + * test lock in case scan has failed + * but device is still locked + */ + if (mutex_is_locked(&mdev->mq->mutex)) + mutex_unlock(&mdev->mq->mutex); + maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO, + 0, NULL); + } + } +} + /* maple dma end bottom half - implemented via workqueue */ static void maple_dma_handler(struct work_struct *work) { @@ -512,7 +621,6 @@ static void maple_dma_handler(struct work_struct *work) struct maple_device *dev; char *recvbuf; enum maple_code code; - int i; if (!maple_dma_done()) return; @@ -522,6 +630,10 @@ static void maple_dma_handler(struct work_struct *work) recvbuf = mq->recvbuf; code = recvbuf[0]; dev = mq->dev; + kfree(mq->sendbuf); + mutex_unlock(&mq->mutex); + list_del_init(&mq->list); + switch (code) { case MAPLE_RESPONSE_NONE: maple_response_none(dev, mq); @@ -558,26 +670,16 @@ static void maple_dma_handler(struct work_struct *work) break; } } - INIT_LIST_HEAD(&maple_sentq); + /* if scanning is 1 then we have subdevices to check */ if (scanning == 1) { maple_send(); scanning = 2; } else scanning = 0; - - if (!fullscan) { - fullscan = 1; - for (i = 0; i < MAPLE_PORTS; i++) { - if (checked[i] == false) { - fullscan = 0; - dev = baseunits[i]; - dev->mq->command = - MAPLE_COMMAND_DEVINFO; - dev->mq->length = 0; - maple_add_packet(dev->mq); - } - } - } + /*check if we have actually tested all ports yet */ + if (!fullscan) + maple_port_rescan(); + /* mark that we have been through the first scan */ if (started == 0) started = 1; } @@ -631,7 +733,7 @@ static int match_maple_bus_driver(struct device *devptr, if (maple_dev->devinfo.function == 0xFFFFFFFF) return 0; else if (maple_dev->devinfo.function & - be32_to_cpu(maple_drv->function)) + cpu_to_be32(maple_drv->function)) return 1; return 0; } @@ -713,6 +815,9 @@ static int __init maple_bus_init(void) if (!maple_queue_cache) goto cleanup_bothirqs; + INIT_LIST_HEAD(&maple_waitq); + INIT_LIST_HEAD(&maple_sentq); + /* setup maple ports */ for (i = 0; i < MAPLE_PORTS; i++) { checked[i] = false; @@ -723,9 +828,7 @@ static int __init maple_bus_init(void) maple_free_dev(mdev[i]); goto cleanup_cache; } - mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO; - mdev[i]->mq->length = 0; - maple_add_packet(mdev[i]->mq); + maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL); subdevice_map[i] = 0; } diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 8da7535c0c70..77b44fb48f0a 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->gadget.ops = &m66592_gadget_ops; device_initialize(&m66592->gadget.dev); - dev_set_name(&m66592->gadget, "gadget"); + dev_set_name(&m66592->gadget.dev, "gadget"); m66592->gadget.is_dualspeed = 1; m66592->gadget.dev.parent = &pdev->dev; m66592->gadget.dev.dma_mask = pdev->dev.dma_mask; diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0ebc1bfd2514..a6b55297a7fb 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3) += ps3fb.o obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o -obj-$(CONFIG_FB_SH7343VOU) += sh7343_voufb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c index 5001bd4ef466..38a1e8308c83 100644 --- a/drivers/video/arkfb.c +++ b/drivers/video/arkfb.c @@ -1126,11 +1126,8 @@ static int ark_pci_resume (struct pci_dev* dev) acquire_console_sem(); mutex_lock(&(par->open_lock)); - if (par->ref_count == 0) { - mutex_unlock(&(par->open_lock)); - release_console_sem(); - return 0; - } + if (par->ref_count == 0) + goto fail; pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); @@ -1143,8 +1140,8 @@ static int ark_pci_resume (struct pci_dev* dev) arkfb_set_par(info); fb_set_suspend(info, 0); - mutex_unlock(&(par->open_lock)); fail: + mutex_unlock(&(par->open_lock)); release_console_sem(); return 0; } diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index fbea2bd129c7..6fa0b9d5559a 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -18,7 +18,7 @@ #include <linux/fb.h> #include <linux/backlight.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #include <asm/hp6xx.h> #include <asm/hd64461.h> diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c index 72d44dbfce82..738694d23889 100644 --- a/drivers/video/backlight/platform_lcd.c +++ b/drivers/video/backlight/platform_lcd.c @@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev) plcd->us = dev; plcd->pdata = pdata; - plcd->lcd = lcd_device_register("platform-lcd", dev, + plcd->lcd = lcd_device_register(dev_name(dev), dev, plcd, &platform_lcd_ops); if (IS_ERR(plcd->lcd)) { dev_err(dev, "cannot register lcd device\n"); @@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, plcd); + platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL); + return 0; err_mem: diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index d7822af0e00a..ef7870f5ea08 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -24,6 +24,7 @@ #include <asm/hardware.h> #include <asm/parisc-device.h> #include <asm/cacheflush.h> +#include <asm/grfioctl.h> #include "../sticore.h" @@ -725,6 +726,7 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti, { struct sti_cooked_rom *cooked; struct sti_rom *raw = NULL; + unsigned long revno; cooked = kmalloc(sizeof *cooked, GFP_KERNEL); if (!cooked) @@ -767,9 +769,35 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti, sti->graphics_id[1] = raw->graphics_id[1]; sti_dump_rom(raw); - + + /* check if the ROM routines in this card are compatible */ + if (wordmode || sti->graphics_id[1] != 0x09A02587) + goto ok; + + revno = (raw->revno[0] << 8) | raw->revno[1]; + + switch (sti->graphics_id[0]) { + case S9000_ID_HCRX: + /* HyperA or HyperB ? */ + if (revno == 0x8408 || revno == 0x840b) + goto msg_not_supported; + break; + case CRT_ID_THUNDER: + if (revno == 0x8509) + goto msg_not_supported; + break; + case CRT_ID_THUNDER2: + if (revno == 0x850c) + goto msg_not_supported; + } +ok: return 1; +msg_not_supported: + printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n"); + printk(KERN_ERR "Please see http://parisc-linux.org/faq/" + "graphics-howto.html for more info.\n"); + /* fall through */ out_err: kfree(raw); kfree(cooked); diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 2e552d5bbb5d..f89c3cce1e0c 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -87,6 +87,8 @@ static int gbe_revision; static int ypan, ywrap; static uint32_t pseudo_palette[16]; +static uint32_t gbe_cmap[256]; +static int gbe_turned_on; /* 0 turned off, 1 turned on */ static char *mode_option __initdata = NULL; @@ -208,6 +210,8 @@ void gbe_turn_off(void) int i; unsigned int val, x, y, vpixen_off; + gbe_turned_on = 0; + /* check if pixel counter is on */ val = gbe->vt_xy; if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1) @@ -371,6 +375,22 @@ static void gbe_turn_on(void) } if (i == 10000) printk(KERN_ERR "gbefb: turn on DMA timed out\n"); + + gbe_turned_on = 1; +} + +static void gbe_loadcmap(void) +{ + int i, j; + + for (i = 0; i < 256; i++) { + for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++) + udelay(10); + if (j == 1000) + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + + gbe->cmap[i] = gbe_cmap[i]; + } } /* @@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info) switch (blank) { case FB_BLANK_UNBLANK: /* unblank */ gbe_turn_on(); + gbe_loadcmap(); break; case FB_BLANK_NORMAL: /* blank */ @@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info) gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8); /* Initialize the color map */ - for (i = 0; i < 256; i++) { - int j; - - for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++) - udelay(10); - if (j == 1000) - printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + for (i = 0; i < 256; i++) + gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24); - gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24); - } + gbe_loadcmap(); return 0; } @@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green, blue >>= 8; if (info->var.bits_per_pixel <= 8) { - /* wait for the color map FIFO to have a free entry */ - for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++) - udelay(10); - if (i == 1000) { - printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); - return 1; + gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8); + if (gbe_turned_on) { + /* wait for the color map FIFO to have a free entry */ + for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++) + udelay(10); + if (i == 1000) { + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + return 1; + } + gbe->cmap[regno] = gbe_cmap[regno]; } - gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8); } else if (regno < 16) { switch (info->var.bits_per_pixel) { case 15: diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 392a8be6aa76..e6467cf9f19f 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -27,7 +27,7 @@ #include <asm/pgtable.h> #include <asm/io.h> #include <asm/hd64461.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #define WIDTH 640 diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index 8c863a7f654b..0a0fd48a8566 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -58,18 +58,18 @@ #ifdef CONFIG_SH_DREAMCAST #include <asm/machvec.h> -#include <asm/mach/sysasic.h> +#include <mach-dreamcast/mach/sysasic.h> #endif #ifdef CONFIG_SH_DMA #include <linux/pagemap.h> -#include <asm/mach/dma.h> +#include <mach/dma.h> #include <asm/dma.h> #endif #ifdef CONFIG_SH_STORE_QUEUES #include <linux/uaccess.h> -#include <asm/cpu/sq.h> +#include <cpu/sq.h> #endif #ifndef PCI_DEVICE_ID_NEC_NEON250 diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 536ab11623f0..4a484ee98f8a 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -853,11 +853,8 @@ static int vt8623_pci_resume(struct pci_dev* dev) acquire_console_sem(); mutex_lock(&(par->open_lock)); - if (par->ref_count == 0) { - mutex_unlock(&(par->open_lock)); - release_console_sem(); - return 0; - } + if (par->ref_count == 0) + goto fail; pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); @@ -870,8 +867,8 @@ static int vt8623_pci_resume(struct pci_dev* dev) vt8623fb_set_par(info); fb_set_suspend(info, 0); - mutex_unlock(&(par->open_lock)); fail: + mutex_unlock(&(par->open_lock)); release_console_sem(); return 0; diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index eaa3f2a79ff5..ccd6c530782d 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -420,7 +420,7 @@ static int __devinit detect_cru_service(void) static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, void *data) { - static unsigned long rom_pl; + unsigned long rom_pl; static int die_nmi_called; if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index 2f5503902c37..78db4953a800 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd) } mntget(newmnt); - err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts); + err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/block_dev.c b/fs/block_dev.c index dcf37cada369..aff54219e049 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) * hooks: /n/, see "layering violations". */ ret = devcgroup_inode_permission(bdev->bd_inode, perm); - if (ret != 0) + if (ret != 0) { + bdput(bdev); return ret; + } ret = -ENXIO; file->f_mapping = bdev->bd_inode->i_mapping; @@ -1234,6 +1236,7 @@ fail: bdev = ERR_PTR(error); goto out; } +EXPORT_SYMBOL(lookup_bdev); /** * open_bdev_excl - open a block device by name and set it up for use diff --git a/fs/buffer.c b/fs/buffer.c index ca12a6bb82b1..4dbe52948e8f 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write); /* * The buffer's backing address_space's private_lock must be held */ -static inline void __remove_assoc_queue(struct buffer_head *bh) +static void __remove_assoc_queue(struct buffer_head *bh) { list_del_init(&bh->b_assoc_buffers); WARN_ON(!bh->b_assoc_map); diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d82374c9e329..d2c8eef84f3c 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd, int err; mntget(newmnt); - err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist); + err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 285b64a8b06e..488eb424f662 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -29,7 +29,7 @@ #define DEVPTS_DEFAULT_MODE 0600 extern int pty_limit; /* Config limit on Unix98 ptys */ -static DEFINE_IDR(allocated_ptys); +static DEFINE_IDA(allocated_ptys); static DEFINE_MUTEX(allocated_ptys_lock); static struct vfsmount *devpts_mnt; @@ -180,24 +180,24 @@ static struct dentry *get_node(int num) int devpts_new_index(void) { int index; - int idr_ret; + int ida_ret; retry: - if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) { + if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) { return -ENOMEM; } mutex_lock(&allocated_ptys_lock); - idr_ret = idr_get_new(&allocated_ptys, NULL, &index); - if (idr_ret < 0) { + ida_ret = ida_get_new(&allocated_ptys, &index); + if (ida_ret < 0) { mutex_unlock(&allocated_ptys_lock); - if (idr_ret == -EAGAIN) + if (ida_ret == -EAGAIN) goto retry; return -EIO; } if (index >= pty_limit) { - idr_remove(&allocated_ptys, index); + ida_remove(&allocated_ptys, index); mutex_unlock(&allocated_ptys_lock); return -EIO; } @@ -208,7 +208,7 @@ retry: void devpts_kill_index(int idx) { mutex_lock(&allocated_ptys_lock); - idr_remove(&allocated_ptys, idx); + ida_remove(&allocated_ptys, idx); mutex_unlock(&allocated_ptys_lock); } diff --git a/fs/dquot.c b/fs/dquot.c index 1346eebe74ce..8ec4d6cc7633 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -1793,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) return ret; } +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path) +{ + int error = security_quota_on(path->dentry); + if (error) + return error; + /* Quota file not on the same filesystem? */ + if (path->mnt->mnt_sb != sb) + error = -EXDEV; + else + error = vfs_quota_on_inode(path->dentry->d_inode, type, + format_id); + return error; +} + /* Actual function called from quotactl() */ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount) @@ -1804,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, return vfs_quota_on_remount(sb, type); error = path_lookup(path, LOOKUP_FOLLOW, &nd); - if (error < 0) - return error; - error = security_quota_on(nd.path.dentry); - if (error) - goto out_path; - /* Quota file not on the same filesystem? */ - if (nd.path.mnt->mnt_sb != sb) - error = -EXDEV; - else - error = vfs_quota_on_inode(nd.path.dentry->d_inode, type, - format_id); -out_path: - path_put(&nd.path); + if (!error) { + error = vfs_quota_on_path(sb, type, format_id, &nd.path); + path_put(&nd.path); + } return error; } @@ -2185,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format); EXPORT_SYMBOL(dqstats); EXPORT_SYMBOL(dq_data_lock); EXPORT_SYMBOL(vfs_quota_on); +EXPORT_SYMBOL(vfs_quota_on_path); EXPORT_SYMBOL(vfs_quota_on_mount); EXPORT_SYMBOL(vfs_quota_off); EXPORT_SYMBOL(vfs_quota_sync); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 8ddced384674..f38a5afc39a1 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2810,8 +2810,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id, journal_unlock_updates(EXT3_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b5479b1dff14..1e69f29a8c55 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3352,8 +3352,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id, jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/fcntl.c b/fs/fcntl.c index 61d625136813..ac4f7db9f134 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -49,73 +49,6 @@ static int get_close_on_exec(unsigned int fd) return res; } -/* - * locate_fd finds a free file descriptor in the open_fds fdset, - * expanding the fd arrays if necessary. Must be called with the - * file_lock held for write. - */ - -static int locate_fd(unsigned int orig_start, int cloexec) -{ - struct files_struct *files = current->files; - unsigned int newfd; - unsigned int start; - int error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); -repeat: - fdt = files_fdtable(files); - /* - * Someone might have closed fd's in the range - * orig_start..fdt->next_fd - */ - start = orig_start; - if (start < files->next_fd) - start = files->next_fd; - - newfd = start; - if (start < fdt->max_fds) - newfd = find_next_zero_bit(fdt->open_fds->fds_bits, - fdt->max_fds, start); - - error = expand_files(files, newfd); - if (error < 0) - goto out; - - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - if (error) - goto repeat; - - if (start <= files->next_fd) - files->next_fd = newfd + 1; - - FD_SET(newfd, fdt->open_fds); - if (cloexec) - FD_SET(newfd, fdt->close_on_exec); - else - FD_CLR(newfd, fdt->close_on_exec); - error = newfd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -static int dupfd(struct file *file, unsigned int start, int cloexec) -{ - int fd = locate_fd(start, cloexec); - if (fd >= 0) - fd_install(fd, file); - else - fput(file); - - return fd; -} - asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) { int err = -EBADF; @@ -130,31 +63,35 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) return -EINVAL; spin_lock(&files->file_lock); - if (!(file = fcheck(oldfd))) - goto out_unlock; - get_file(file); /* We are now finished with oldfd */ - err = expand_files(files, newfd); + file = fcheck(oldfd); + if (unlikely(!file)) + goto Ebadf; if (unlikely(err < 0)) { if (err == -EMFILE) - err = -EBADF; - goto out_fput; + goto Ebadf; + goto out_unlock; } - - /* To avoid races with open() and dup(), we will mark the fd as - * in-use in the open-file bitmap throughout the entire dup2() - * process. This is quite safe: do_close() uses the fd array - * entry, not the bitmap, to decide what work needs to be - * done. --sct */ - /* Doesn't work. open() might be there first. --AV */ - - /* Yes. It's a race. In user space. Nothing sane to do */ + /* + * We need to detect attempts to do dup2() over allocated but still + * not finished descriptor. NB: OpenBSD avoids that at the price of + * extra work in their equivalent of fget() - they insert struct + * file immediately after grabbing descriptor, mark it larval if + * more work (e.g. actual opening) is needed and make sure that + * fget() treats larval files as absent. Potentially interesting, + * but while extra work in fget() is trivial, locking implications + * and amount of surgery on open()-related paths in VFS are not. + * FreeBSD fails with -EBADF in the same situation, NetBSD "solution" + * deadlocks in rather amusing ways, AFAICS. All of that is out of + * scope of POSIX or SUS, since neither considers shared descriptor + * tables and this condition does not arise without those. + */ err = -EBUSY; fdt = files_fdtable(files); tofree = fdt->fd[newfd]; if (!tofree && FD_ISSET(newfd, fdt->open_fds)) - goto out_fput; - + goto out_unlock; + get_file(file); rcu_assign_pointer(fdt->fd[newfd], file); FD_SET(newfd, fdt->open_fds); if (flags & O_CLOEXEC) @@ -165,17 +102,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) if (tofree) filp_close(tofree, files); - err = newfd; -out: - return err; -out_unlock: - spin_unlock(&files->file_lock); - goto out; -out_fput: + return newfd; + +Ebadf: + err = -EBADF; +out_unlock: spin_unlock(&files->file_lock); - fput(file); - goto out; + return err; } asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) @@ -194,10 +128,15 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) asmlinkage long sys_dup(unsigned int fildes) { int ret = -EBADF; - struct file * file = fget(fildes); - - if (file) - ret = dupfd(file, 0, 0); + struct file *file = fget(fildes); + + if (file) { + ret = get_unused_fd(); + if (ret >= 0) + fd_install(ret, file); + else + fput(file); + } return ret; } @@ -322,8 +261,11 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_DUPFD_CLOEXEC: if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur) break; - get_file(filp); - err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC); + err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0); + if (err >= 0) { + get_file(filp); + fd_install(err, filp); + } break; case F_GETFD: err = get_close_on_exec(fd) ? FD_CLOEXEC : 0; diff --git a/fs/file.c b/fs/file.c index d8773b19fe47..f313314f996f 100644 --- a/fs/file.c +++ b/fs/file.c @@ -6,6 +6,7 @@ * Manage the dynamic fd arrays in the process files_struct. */ +#include <linux/module.h> #include <linux/fs.h> #include <linux/mm.h> #include <linux/time.h> @@ -432,3 +433,63 @@ struct files_struct init_files = { }, .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), }; + +/* + * allocate a file descriptor, mark it busy. + */ +int alloc_fd(unsigned start, unsigned flags) +{ + struct files_struct *files = current->files; + unsigned int fd; + int error; + struct fdtable *fdt; + + spin_lock(&files->file_lock); +repeat: + fdt = files_fdtable(files); + fd = start; + if (fd < files->next_fd) + fd = files->next_fd; + + if (fd < fdt->max_fds) + fd = find_next_zero_bit(fdt->open_fds->fds_bits, + fdt->max_fds, fd); + + error = expand_files(files, fd); + if (error < 0) + goto out; + + /* + * If we needed to expand the fs array we + * might have blocked - try again. + */ + if (error) + goto repeat; + + if (start <= files->next_fd) + files->next_fd = fd + 1; + + FD_SET(fd, fdt->open_fds); + if (flags & O_CLOEXEC) + FD_SET(fd, fdt->close_on_exec); + else + FD_CLR(fd, fdt->close_on_exec); + error = fd; +#if 1 + /* Sanity check */ + if (rcu_dereference(fdt->fd[fd]) != NULL) { + printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd); + rcu_assign_pointer(fdt->fd[fd], NULL); + } +#endif + +out: + spin_unlock(&files->file_lock); + return error; +} + +int get_unused_fd(void) +{ + return alloc_fd(0, 0); +} +EXPORT_SYMBOL(get_unused_fd); diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c index 629af01e5ade..6caf1e1ee26d 100644 --- a/fs/jffs2/summary.c +++ b/fs/jffs2/summary.c @@ -23,6 +23,8 @@ int jffs2_sum_init(struct jffs2_sb_info *c) { + uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE); + c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL); if (!c->summary) { @@ -30,7 +32,7 @@ int jffs2_sum_init(struct jffs2_sb_info *c) return -ENOMEM; } - c->summary->sum_buf = vmalloc(c->sector_size); + c->summary->sum_buf = kmalloc(sum_size, GFP_KERNEL); if (!c->summary->sum_buf) { JFFS2_WARNING("Can't allocate buffer for writing out summary information!\n"); @@ -49,7 +51,7 @@ void jffs2_sum_exit(struct jffs2_sb_info *c) jffs2_sum_disable_collecting(c->summary); - vfree(c->summary->sum_buf); + kfree(c->summary->sum_buf); c->summary->sum_buf = NULL; kfree(c->summary); @@ -665,7 +667,7 @@ crc_err: /* Write summary data to flash - helper function for jffs2_sum_write_sumnode() */ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, - uint32_t infosize, uint32_t datasize, int padsize) + uint32_t infosize, uint32_t datasize, int padsize) { struct jffs2_raw_summary isum; union jffs2_sum_mem *temp; @@ -676,6 +678,26 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock int ret; size_t retlen; + if (padsize + datasize > MAX_SUMMARY_SIZE) { + /* It won't fit in the buffer. Abort summary for this jeb */ + jffs2_sum_disable_collecting(c->summary); + + JFFS2_WARNING("Summary too big (%d data, %d pad) in eraseblock at %08x\n", + datasize, padsize, jeb->offset); + /* Non-fatal */ + return 0; + } + /* Is there enough space for summary? */ + if (padsize < 0) { + /* don't try to write out summary for this jeb */ + jffs2_sum_disable_collecting(c->summary); + + JFFS2_WARNING("Not enough space for summary, padsize = %d\n", + padsize); + /* Non-fatal */ + return 0; + } + memset(c->summary->sum_buf, 0xff, datasize); memset(&isum, 0, sizeof(isum)); @@ -821,7 +843,7 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) { int datasize, infosize, padsize; struct jffs2_eraseblock *jeb; - int ret; + int ret = 0; dbg_summary("called\n"); @@ -841,16 +863,6 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) infosize += padsize; datasize += padsize; - /* Is there enough space for summary? */ - if (padsize < 0) { - /* don't try to write out summary for this jeb */ - jffs2_sum_disable_collecting(c->summary); - - JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize); - spin_lock(&c->erase_completion_lock); - return 0; - } - ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize); spin_lock(&c->erase_completion_lock); return ret; diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h index 8bf34f2fa5ce..60207a2ae952 100644 --- a/fs/jffs2/summary.h +++ b/fs/jffs2/summary.h @@ -13,6 +13,12 @@ #ifndef JFFS2_SUMMARY_H #define JFFS2_SUMMARY_H +/* Limit summary size to 64KiB so that we can kmalloc it. If the summary + is larger than that, we have to just ditch it and avoid using summary + for the eraseblock in question... and it probably doesn't hurt us much + anyway. */ +#define MAX_SUMMARY_SIZE 65536 + #include <linux/uio.h> #include <linux/jffs2.h> diff --git a/fs/libfs.c b/fs/libfs.c index baeb71ee1cde..1add676a19df 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name, s->s_flags = MS_NOUSER; s->s_maxbytes = ~0ULL; - s->s_blocksize = 1024; - s->s_blocksize_bits = 10; + s->s_blocksize = PAGE_SIZE; + s->s_blocksize_bits = PAGE_SHIFT; s->s_magic = magic; s->s_op = ops ? ops : &simple_super_operations; s->s_time_gran = 1; diff --git a/fs/namei.c b/fs/namei.c index a7b0a0b80128..4ea63ed5e791 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -274,7 +274,7 @@ int inode_permission(struct inode *inode, int mask) return retval; return security_inode_permission(inode, - mask & (MAY_READ|MAY_WRITE|MAY_EXEC)); + mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND)); } /** @@ -1431,8 +1431,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir) * 3. We should have write and exec permissions on dir * 4. We can't do it if dir is immutable (done in permission()) */ -static inline int may_create(struct inode *dir, struct dentry *child, - struct nameidata *nd) +static inline int may_create(struct inode *dir, struct dentry *child) { if (child->d_inode) return -EEXIST; @@ -1504,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2) int vfs_create(struct inode *dir, struct dentry *dentry, int mode, struct nameidata *nd) { - int error = may_create(dir, dentry, nd); + int error = may_create(dir, dentry); if (error) return error; @@ -1948,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create); int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2049,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev) int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2316,7 +2315,7 @@ asmlinkage long sys_unlink(const char __user *pathname) int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2386,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de if (!inode) return -ENOENT; - error = may_create(dir, new_dentry, NULL); + error = may_create(dir, new_dentry); if (error) return error; @@ -2595,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry, return error; if (!new_dentry->d_inode) - error = may_create(new_dir, new_dentry, NULL); + error = may_create(new_dir, new_dentry); else error = may_delete(new_dir, new_dentry, is_dir); if (error) diff --git a/fs/namespace.c b/fs/namespace.c index 411728c0c8bb..6e283c93b50d 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1667,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags, if (IS_ERR(mnt)) return PTR_ERR(mnt); - return do_add_mount(mnt, nd, mnt_flags, NULL); + return do_add_mount(mnt, &nd->path, mnt_flags, NULL); } /* * add a mount into a namespace's mount tree * - provide the option of adding the new mount to an expiration list */ -int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist) { int err; down_write(&namespace_sem); /* Something was mounted here while we slept */ - while (d_mountpoint(nd->path.dentry) && - follow_down(&nd->path.mnt, &nd->path.dentry)) + while (d_mountpoint(path->dentry) && + follow_down(&path->mnt, &path->dentry)) ; err = -EINVAL; - if (!check_mnt(nd->path.mnt)) + if (!check_mnt(path->mnt)) goto unlock; /* Refuse the same filesystem on the same mount point */ err = -EBUSY; - if (nd->path.mnt->mnt_sb == newmnt->mnt_sb && - nd->path.mnt->mnt_root == nd->path.dentry) + if (path->mnt->mnt_sb == newmnt->mnt_sb && + path->mnt->mnt_root == path->dentry) goto unlock; err = -EINVAL; @@ -1699,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, goto unlock; newmnt->mnt_flags = mnt_flags; - if ((err = graft_tree(newmnt, &nd->path))) + if ((err = graft_tree(newmnt, path))) goto unlock; if (fslist) /* add to the specified expiration list */ diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 2f285ef76399..66df08dd1caf 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) goto out_err; mntget(mnt); - err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, + err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, &nfs_automount_list); if (err < 0) { mntput(mnt); diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c index dc75f22be3f2..697663b01bae 100644 --- a/fs/omfs/bitmap.c +++ b/fs/omfs/bitmap.c @@ -71,10 +71,10 @@ static int set_run(struct super_block *sb, int map, } if (set) { set_bit(bit, sbi->s_imap[map]); - set_bit(bit, (long *) bh->b_data); + set_bit(bit, (unsigned long *)bh->b_data); } else { clear_bit(bit, sbi->s_imap[map]); - clear_bit(bit, (long *) bh->b_data); + clear_bit(bit, (unsigned long *)bh->b_data); } } mark_buffer_dirty(bh); @@ -109,7 +109,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block) if (!bh) goto out; - set_bit(bit, (long *) bh->b_data); + set_bit(bit, (unsigned long *)bh->b_data); mark_buffer_dirty(bh); brelse(bh); } diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c index 05a5bc31e4bd..c0757e998876 100644 --- a/fs/omfs/dir.c +++ b/fs/omfs/dir.c @@ -104,7 +104,7 @@ int omfs_make_empty(struct inode *inode, struct super_block *sb) oi = (struct omfs_inode *) bh->b_data; oi->i_head.h_self = cpu_to_be64(inode->i_ino); - oi->i_sibling = ~0ULL; + oi->i_sibling = ~cpu_to_be64(0ULL); mark_buffer_dirty(bh); brelse(bh); diff --git a/fs/omfs/file.c b/fs/omfs/file.c index 66e01fae4384..7e2499053e4d 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -30,11 +30,11 @@ void omfs_make_empty_table(struct buffer_head *bh, int offset) { struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset]; - oe->e_next = ~0ULL; + oe->e_next = ~cpu_to_be64(0ULL); oe->e_extent_count = cpu_to_be32(1), oe->e_fill = cpu_to_be32(0x22), - oe->e_entry.e_cluster = ~0ULL; - oe->e_entry.e_blocks = ~0ULL; + oe->e_entry.e_cluster = ~cpu_to_be64(0ULL); + oe->e_entry.e_blocks = ~cpu_to_be64(0ULL); } int omfs_shrink_inode(struct inode *inode) diff --git a/fs/open.c b/fs/open.c index 52647be277a2..07da9359481c 100644 --- a/fs/open.c +++ b/fs/open.c @@ -963,62 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags) } EXPORT_SYMBOL(dentry_open); -/* - * Find an empty file descriptor entry, and mark it busy. - */ -int get_unused_fd_flags(int flags) -{ - struct files_struct * files = current->files; - int fd, error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); - -repeat: - fdt = files_fdtable(files); - fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds, - files->next_fd); - - /* Do we need to expand the fd array or fd set? */ - error = expand_files(files, fd); - if (error < 0) - goto out; - - if (error) { - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - goto repeat; - } - - FD_SET(fd, fdt->open_fds); - if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); - else - FD_CLR(fd, fdt->close_on_exec); - files->next_fd = fd + 1; -#if 1 - /* Sanity check */ - if (fdt->fd[fd] != NULL) { - printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd); - fdt->fd[fd] = NULL; - } -#endif - error = fd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -int get_unused_fd(void) -{ - return get_unused_fd_flags(0); -} - -EXPORT_SYMBOL(get_unused_fd); - static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); diff --git a/fs/proc/generic.c b/fs/proc/generic.c index cb4096cc3fb7..4fb81e9c94e3 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -300,10 +300,10 @@ out: return rtn; } -static DEFINE_IDR(proc_inum_idr); +static DEFINE_IDA(proc_inum_ida); static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ -#define PROC_DYNAMIC_FIRST 0xF0000000UL +#define PROC_DYNAMIC_FIRST 0xF0000000U /* * Return an inode number between PROC_DYNAMIC_FIRST and @@ -311,36 +311,33 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ */ static unsigned int get_inode_number(void) { - int i, inum = 0; + unsigned int i; int error; retry: - if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0) + if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0) return 0; spin_lock(&proc_inum_lock); - error = idr_get_new(&proc_inum_idr, NULL, &i); + error = ida_get_new(&proc_inum_ida, &i); spin_unlock(&proc_inum_lock); if (error == -EAGAIN) goto retry; else if (error) return 0; - inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST; - - /* inum will never be more than 0xf0ffffff, so no check - * for overflow. - */ - - return inum; + if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { + spin_lock(&proc_inum_lock); + ida_remove(&proc_inum_ida, i); + spin_unlock(&proc_inum_lock); + } + return PROC_DYNAMIC_FIRST + i; } static void release_inode_number(unsigned int inum) { - int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK; - spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, id); + ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST); spin_unlock(&proc_inum_lock); } diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 879e54d35c2d..282a13596c70 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -2076,8 +2076,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, return err; /* Quotafile not on the same filesystem? */ if (nd.path.mnt->mnt_sb != sb) { - path_put(&nd.path); - return -EXDEV; + err = -EXDEV; + goto out; } inode = nd.path.dentry->d_inode; /* We must not pack tails for quota files on reiserfs for quota IO to work */ @@ -2087,8 +2087,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, reiserfs_warning(sb, "reiserfs: Unpacking tail of quota file failed" " (%d). Cannot turn on quotas.", err); - path_put(&nd.path); - return -EINVAL; + err = -EINVAL; + goto out; } mark_inode_dirty(inode); } @@ -2109,13 +2109,15 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, /* Just start temporary transaction and finish it */ err = journal_begin(&th, sb, 1); if (err) - return err; + goto out; err = journal_end_sync(&th, sb, 1); if (err) - return err; + goto out; } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); +out: path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, 0); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c index 8e51a2aaa977..60d2f822e87b 100644 --- a/fs/romfs/inode.c +++ b/fs/romfs/inode.c @@ -418,7 +418,8 @@ static int romfs_readpage(struct file *file, struct page * page) { struct inode *inode = page->mapping->host; - loff_t offset, avail, readlen; + loff_t offset, size; + unsigned long filled; void *buf; int result = -EIO; @@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page) /* 32 bit warning -- but not for us :) */ offset = page_offset(page); - if (offset < i_size_read(inode)) { - avail = inode->i_size-offset; - readlen = min_t(unsigned long, avail, PAGE_SIZE); - if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) { - if (readlen < PAGE_SIZE) { - memset(buf + readlen,0,PAGE_SIZE-readlen); - } - SetPageUptodate(page); - result = 0; + size = i_size_read(inode); + filled = 0; + result = 0; + if (offset < size) { + unsigned long readlen; + + size -= offset; + readlen = size > PAGE_SIZE ? PAGE_SIZE : size; + + filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen); + + if (filled != readlen) { + SetPageError(page); + filled = 0; + result = -EIO; } } - if (result) { - memset(buf, 0, PAGE_SIZE); - SetPageError(page); - } + + if (filled < PAGE_SIZE) + memset(buf + filled, 0, PAGE_SIZE-filled); + + if (!result) + SetPageUptodate(page); flush_dcache_page(page); unlock_page(page); diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h index dbe13c6121a8..c1d3c50c3223 100644 --- a/include/asm-ia64/sn/mspec.h +++ b/include/asm-ia64/sn/mspec.h @@ -4,7 +4,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_IA64_SN_MSPEC_H @@ -32,26 +32,26 @@ #ifdef __KERNEL__ /* - * Each Atomic Memory Operation (AMO formerly known as fetchop) + * Each Atomic Memory Operation (amo, formerly known as fetchop) * variable is 64 bytes long. The first 8 bytes are used. The * remaining 56 bytes are unaddressable due to the operation taking * that portion of the address. * - * NOTE: The AMO_t _MUST_ be placed in either the first or second half - * of the cache line. The cache line _MUST NOT_ be used for anything - * other than additional AMO_t entries. This is because there are two + * NOTE: The amo structure _MUST_ be placed in either the first or second + * half of the cache line. The cache line _MUST NOT_ be used for anything + * other than additional amo entries. This is because there are two * addresses which reference the same physical cache line. One will * be a cached entry with the memory type bits all set. This address - * may be loaded into processor cache. The AMO_t will be referenced + * may be loaded into processor cache. The amo will be referenced * uncached via the memory special memory type. If any portion of the * cached cache-line is modified, when that line is flushed, it will * overwrite the uncached value in physical memory and lead to * inconsistency. */ -typedef struct { +struct amo { u64 variable; u64 unused[7]; -} AMO_t; +}; #endif /* __KERNEL__ */ diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h deleted file mode 100644 index 22f67d4a71ab..000000000000 --- a/include/asm-mips/gdb-stub.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 Andreas Busse - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - - -/* - * important register numbers - */ - -#define REG_EPC 37 -#define REG_FP 72 -#define REG_SP 29 - -/* - * Stack layout for the GDB exception handler - * Derived from the stack layout described in asm-mips/stackframe.h - * - * The first PTRSIZE*6 bytes are argument save space for C subroutines. - */ -#define NUMREGS 90 - -#define GDB_FR_REG0 (PTRSIZE*6) /* 0 */ -#define GDB_FR_REG1 ((GDB_FR_REG0) + LONGSIZE) /* 1 */ -#define GDB_FR_REG2 ((GDB_FR_REG1) + LONGSIZE) /* 2 */ -#define GDB_FR_REG3 ((GDB_FR_REG2) + LONGSIZE) /* 3 */ -#define GDB_FR_REG4 ((GDB_FR_REG3) + LONGSIZE) /* 4 */ -#define GDB_FR_REG5 ((GDB_FR_REG4) + LONGSIZE) /* 5 */ -#define GDB_FR_REG6 ((GDB_FR_REG5) + LONGSIZE) /* 6 */ -#define GDB_FR_REG7 ((GDB_FR_REG6) + LONGSIZE) /* 7 */ -#define GDB_FR_REG8 ((GDB_FR_REG7) + LONGSIZE) /* 8 */ -#define GDB_FR_REG9 ((GDB_FR_REG8) + LONGSIZE) /* 9 */ -#define GDB_FR_REG10 ((GDB_FR_REG9) + LONGSIZE) /* 10 */ -#define GDB_FR_REG11 ((GDB_FR_REG10) + LONGSIZE) /* 11 */ -#define GDB_FR_REG12 ((GDB_FR_REG11) + LONGSIZE) /* 12 */ -#define GDB_FR_REG13 ((GDB_FR_REG12) + LONGSIZE) /* 13 */ -#define GDB_FR_REG14 ((GDB_FR_REG13) + LONGSIZE) /* 14 */ -#define GDB_FR_REG15 ((GDB_FR_REG14) + LONGSIZE) /* 15 */ -#define GDB_FR_REG16 ((GDB_FR_REG15) + LONGSIZE) /* 16 */ -#define GDB_FR_REG17 ((GDB_FR_REG16) + LONGSIZE) /* 17 */ -#define GDB_FR_REG18 ((GDB_FR_REG17) + LONGSIZE) /* 18 */ -#define GDB_FR_REG19 ((GDB_FR_REG18) + LONGSIZE) /* 19 */ -#define GDB_FR_REG20 ((GDB_FR_REG19) + LONGSIZE) /* 20 */ -#define GDB_FR_REG21 ((GDB_FR_REG20) + LONGSIZE) /* 21 */ -#define GDB_FR_REG22 ((GDB_FR_REG21) + LONGSIZE) /* 22 */ -#define GDB_FR_REG23 ((GDB_FR_REG22) + LONGSIZE) /* 23 */ -#define GDB_FR_REG24 ((GDB_FR_REG23) + LONGSIZE) /* 24 */ -#define GDB_FR_REG25 ((GDB_FR_REG24) + LONGSIZE) /* 25 */ -#define GDB_FR_REG26 ((GDB_FR_REG25) + LONGSIZE) /* 26 */ -#define GDB_FR_REG27 ((GDB_FR_REG26) + LONGSIZE) /* 27 */ -#define GDB_FR_REG28 ((GDB_FR_REG27) + LONGSIZE) /* 28 */ -#define GDB_FR_REG29 ((GDB_FR_REG28) + LONGSIZE) /* 29 */ -#define GDB_FR_REG30 ((GDB_FR_REG29) + LONGSIZE) /* 30 */ -#define GDB_FR_REG31 ((GDB_FR_REG30) + LONGSIZE) /* 31 */ - -/* - * Saved special registers - */ -#define GDB_FR_STATUS ((GDB_FR_REG31) + LONGSIZE) /* 32 */ -#define GDB_FR_LO ((GDB_FR_STATUS) + LONGSIZE) /* 33 */ -#define GDB_FR_HI ((GDB_FR_LO) + LONGSIZE) /* 34 */ -#define GDB_FR_BADVADDR ((GDB_FR_HI) + LONGSIZE) /* 35 */ -#define GDB_FR_CAUSE ((GDB_FR_BADVADDR) + LONGSIZE) /* 36 */ -#define GDB_FR_EPC ((GDB_FR_CAUSE) + LONGSIZE) /* 37 */ - -/* - * Saved floating point registers - */ -#define GDB_FR_FPR0 ((GDB_FR_EPC) + LONGSIZE) /* 38 */ -#define GDB_FR_FPR1 ((GDB_FR_FPR0) + LONGSIZE) /* 39 */ -#define GDB_FR_FPR2 ((GDB_FR_FPR1) + LONGSIZE) /* 40 */ -#define GDB_FR_FPR3 ((GDB_FR_FPR2) + LONGSIZE) /* 41 */ -#define GDB_FR_FPR4 ((GDB_FR_FPR3) + LONGSIZE) /* 42 */ -#define GDB_FR_FPR5 ((GDB_FR_FPR4) + LONGSIZE) /* 43 */ -#define GDB_FR_FPR6 ((GDB_FR_FPR5) + LONGSIZE) /* 44 */ -#define GDB_FR_FPR7 ((GDB_FR_FPR6) + LONGSIZE) /* 45 */ -#define GDB_FR_FPR8 ((GDB_FR_FPR7) + LONGSIZE) /* 46 */ -#define GDB_FR_FPR9 ((GDB_FR_FPR8) + LONGSIZE) /* 47 */ -#define GDB_FR_FPR10 ((GDB_FR_FPR9) + LONGSIZE) /* 48 */ -#define GDB_FR_FPR11 ((GDB_FR_FPR10) + LONGSIZE) /* 49 */ -#define GDB_FR_FPR12 ((GDB_FR_FPR11) + LONGSIZE) /* 50 */ -#define GDB_FR_FPR13 ((GDB_FR_FPR12) + LONGSIZE) /* 51 */ -#define GDB_FR_FPR14 ((GDB_FR_FPR13) + LONGSIZE) /* 52 */ -#define GDB_FR_FPR15 ((GDB_FR_FPR14) + LONGSIZE) /* 53 */ -#define GDB_FR_FPR16 ((GDB_FR_FPR15) + LONGSIZE) /* 54 */ -#define GDB_FR_FPR17 ((GDB_FR_FPR16) + LONGSIZE) /* 55 */ -#define GDB_FR_FPR18 ((GDB_FR_FPR17) + LONGSIZE) /* 56 */ -#define GDB_FR_FPR19 ((GDB_FR_FPR18) + LONGSIZE) /* 57 */ -#define GDB_FR_FPR20 ((GDB_FR_FPR19) + LONGSIZE) /* 58 */ -#define GDB_FR_FPR21 ((GDB_FR_FPR20) + LONGSIZE) /* 59 */ -#define GDB_FR_FPR22 ((GDB_FR_FPR21) + LONGSIZE) /* 60 */ -#define GDB_FR_FPR23 ((GDB_FR_FPR22) + LONGSIZE) /* 61 */ -#define GDB_FR_FPR24 ((GDB_FR_FPR23) + LONGSIZE) /* 62 */ -#define GDB_FR_FPR25 ((GDB_FR_FPR24) + LONGSIZE) /* 63 */ -#define GDB_FR_FPR26 ((GDB_FR_FPR25) + LONGSIZE) /* 64 */ -#define GDB_FR_FPR27 ((GDB_FR_FPR26) + LONGSIZE) /* 65 */ -#define GDB_FR_FPR28 ((GDB_FR_FPR27) + LONGSIZE) /* 66 */ -#define GDB_FR_FPR29 ((GDB_FR_FPR28) + LONGSIZE) /* 67 */ -#define GDB_FR_FPR30 ((GDB_FR_FPR29) + LONGSIZE) /* 68 */ -#define GDB_FR_FPR31 ((GDB_FR_FPR30) + LONGSIZE) /* 69 */ - -#define GDB_FR_FSR ((GDB_FR_FPR31) + LONGSIZE) /* 70 */ -#define GDB_FR_FIR ((GDB_FR_FSR) + LONGSIZE) /* 71 */ -#define GDB_FR_FRP ((GDB_FR_FIR) + LONGSIZE) /* 72 */ - -#define GDB_FR_DUMMY ((GDB_FR_FRP) + LONGSIZE) /* 73, unused ??? */ - -/* - * Again, CP0 registers - */ -#define GDB_FR_CP0_INDEX ((GDB_FR_DUMMY) + LONGSIZE) /* 74 */ -#define GDB_FR_CP0_RANDOM ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */ -#define GDB_FR_CP0_ENTRYLO0 ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */ -#define GDB_FR_CP0_ENTRYLO1 ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */ -#define GDB_FR_CP0_CONTEXT ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */ -#define GDB_FR_CP0_PAGEMASK ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */ -#define GDB_FR_CP0_WIRED ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */ -#define GDB_FR_CP0_REG7 ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */ -#define GDB_FR_CP0_REG8 ((GDB_FR_CP0_REG7) + LONGSIZE) /* 82 */ -#define GDB_FR_CP0_REG9 ((GDB_FR_CP0_REG8) + LONGSIZE) /* 83 */ -#define GDB_FR_CP0_ENTRYHI ((GDB_FR_CP0_REG9) + LONGSIZE) /* 84 */ -#define GDB_FR_CP0_REG11 ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */ -#define GDB_FR_CP0_REG12 ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */ -#define GDB_FR_CP0_REG13 ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */ -#define GDB_FR_CP0_REG14 ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */ -#define GDB_FR_CP0_PRID ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */ - -#define GDB_FR_SIZE ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1)) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* - * Pad bytes for argument save space on the stack - * 24/48 Bytes for 32/64 bit code - */ - unsigned long pad0[6]; - - /* - * saved main processor registers - */ - long reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7; - long reg8, reg9, reg10, reg11, reg12, reg13, reg14, reg15; - long reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23; - long reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31; - - /* - * Saved special registers - */ - long cp0_status; - long lo; - long hi; - long cp0_badvaddr; - long cp0_cause; - long cp0_epc; - - /* - * Saved floating point registers - */ - long fpr0, fpr1, fpr2, fpr3, fpr4, fpr5, fpr6, fpr7; - long fpr8, fpr9, fpr10, fpr11, fpr12, fpr13, fpr14, fpr15; - long fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23; - long fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31; - - long cp1_fsr; - long cp1_fir; - - /* - * Frame pointer - */ - long frame_ptr; - long dummy; /* unused */ - - /* - * saved cp0 registers - */ - long cp0_index; - long cp0_random; - long cp0_entrylo0; - long cp0_entrylo1; - long cp0_context; - long cp0_pagemask; - long cp0_wired; - long cp0_reg7; - long cp0_reg8; - long cp0_reg9; - long cp0_entryhi; - long cp0_reg11; - long cp0_reg12; - long cp0_reg13; - long cp0_reg14; - long cp0_prid; -}; - -/* - * Prototypes - */ - -extern int kgdb_enabled; -void set_debug_traps(void); -void set_async_breakpoint(unsigned long *epc); - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h index 6ece1b037665..5bf62aafc890 100644 --- a/include/asm-mips/kdebug.h +++ b/include/asm-mips/kdebug.h @@ -1 +1,13 @@ -#include <asm-generic/kdebug.h> +#ifndef _ASM_MIPS_KDEBUG_H +#define _ASM_MIPS_KDEBUG_H + +#include <linux/notifier.h> + +enum die_val { + DIE_OOPS = 1, + DIE_FP, + DIE_TRAP, + DIE_RI, +}; + +#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h new file mode 100644 index 000000000000..48223b09396c --- /dev/null +++ b/include/asm-mips/kgdb.h @@ -0,0 +1,44 @@ +#ifndef __ASM_KGDB_H_ +#define __ASM_KGDB_H_ + +#ifdef __KERNEL__ + +#include <asm/sgidefs.h> + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) + +#define KGDB_GDB_REG_SIZE 32 + +#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS64) + +#ifdef CONFIG_32BIT +#define KGDB_GDB_REG_SIZE 32 +#else /* CONFIG_CPU_32BIT */ +#define KGDB_GDB_REG_SIZE 64 +#endif +#else +#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" +#endif /* _MIPS_ISA */ + +#define BUFMAX 2048 +#if (KGDB_GDB_REG_SIZE == 32) +#define NUMREGBYTES (90*sizeof(u32)) +#define NUMCRITREGBYTES (12*sizeof(u32)) +#else +#define NUMREGBYTES (90*sizeof(u64)) +#define NUMCRITREGBYTES (12*sizeof(u64)) +#endif +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 0 + +extern void arch_kgdb_breakpoint(void); +extern int kgdb_early_setup; +extern void *saved_vectors[32]; +extern void handle_exception(struct pt_regs *regs); +extern void breakinst(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_KGDB_H_ */ diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index c205875d7f31..5510c53b7feb 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) extern int pci_probe_only; +extern char * (*pcibios_plat_setup)(char *str); + #endif /* _ASM_PCI_H */ diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index cbae37ec3d88..5b1ccf901c62 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); void prom_init_cmdline(void); char *prom_getcmdline(void); +void txx9_wdt_init(unsigned long base); +void txx9_spi_init(int busid, unsigned long base, int irq); +void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); +void txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts); +void prom_putchar(char c); +#ifdef CONFIG_EARLY_PRINTK +extern void (*txx9_prom_putchar)(char c); +void txx9_sio_putchar_init(unsigned long baseaddr); +#else +static inline void txx9_sio_putchar_init(unsigned long baseaddr) +{ +} +#endif #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h index d6eb1b6a54eb..a409c446bf18 100644 --- a/include/asm-mips/txx9/jmr3927.h +++ b/include/asm-mips/txx9/jmr3927.h @@ -149,8 +149,6 @@ /* Clocks */ #define JMR3927_CORECLK 132710400 /* 132.7MHz */ -#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */ -#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */ /* * TX3927 Pin Configuration: diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h index d89a45091e24..3d32529060aa 100644 --- a/include/asm-mips/txx9/pci.h +++ b/include/asm-mips/txx9/pci.h @@ -33,4 +33,7 @@ enum txx9_pci_err_action { }; extern enum txx9_pci_err_action txx9_pci_err_action; +extern char * (*txx9_board_pcibios_setup)(char *str); +char *txx9_pcibios_setup(char *str); + #endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h index 9375e4fc2289..02e161d0755d 100644 --- a/include/asm-mips/txx9/smsc_fdc37m81x.h +++ b/include/asm-mips/txx9/smsc_fdc37m81x.h @@ -56,7 +56,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -unsigned long __init smsc_fdc37m81x_init(unsigned long port); +unsigned long smsc_fdc37m81x_init(unsigned long port); void smsc_fdc37m81x_config_beg(void); diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index ea79e1b16e71..587deb9592d2 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -8,9 +8,8 @@ #ifndef __ASM_TXX9_TX3927_H #define __ASM_TXX9_TX3927_H -#include <asm/txx9/txx927.h> - #define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 #define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) #define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) #define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) @@ -236,11 +235,17 @@ struct tx3927_ccfg_reg { /* see PCI_STATUS_XXX in linux/pci.h */ #define PCI_STATUS_NEW_CAP 0x0010 +/* bits for ISTAT/IIM */ +#define TX3927_PCIC_IIM_ALL 0x00001600 + /* bits for TC */ #define TX3927_PCIC_TC_OF16E 0x00000020 #define TX3927_PCIC_TC_IF8E 0x00000010 #define TX3927_PCIC_TC_OF8E 0x00000008 +/* bits for TSTAT/TIM */ +#define TX3927_PCIC_TIM_ALL 0x0003ffff + /* bits for IOBA/MBA */ /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ @@ -313,12 +318,22 @@ struct tx3927_ccfg_reg { #define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) #define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) #define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) -#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) +#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) +#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) +#define TX3927_ROMC_SIZE(ch) \ + (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) + +void tx3927_wdt_init(void); +void tx3927_setup(void); +void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); +void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); struct pci_controller; -void __init tx3927_pcic_setup(struct pci_controller *channel, - unsigned long sdram_size, int extarb); +void tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); +void tx3927_setup_pcierr_irq(void); +void tx3927_irq_init(void); #endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index ceb4b79ff4e3..195f6515db9a 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new) } unsigned int tx4927_get_mem_size(void); -void tx4927_wdr_init(void); +void tx4927_wdt_init(void); void tx4927_setup(void); void tx4927_time_init(unsigned int tmrnr); -void tx4927_setup_serial(void); +void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); +void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h index d61c3d09c4a2..c470b8a5fe57 100644 --- a/include/asm-mips/txx9/tx4927pcic.h +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -10,6 +10,7 @@ #define __ASM_TXX9_TX4927PCIC_H #include <linux/pci.h> +#include <linux/irqreturn.h> struct tx4927_pcic_reg { u32 pciid; @@ -192,8 +193,11 @@ struct tx4927_pcic_reg { struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( struct pci_controller *channel); -void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, - struct pci_controller *channel, int extarb); +void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); void tx4927_report_pcic_status(void); +char *tx4927_pcibios_setup(char *str); +void tx4927_dump_pcic_settings(void); +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); #endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 1ed969d381d6..8175d4ccbc39 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -276,15 +276,18 @@ struct tx4938_ccfg_reg { #define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) #define tx4938_get_mem_size() tx4927_get_mem_size() -void tx4938_wdr_init(void); +void tx4938_wdt_init(void); void tx4938_setup(void); void tx4938_time_init(unsigned int tmrnr); -void tx4938_setup_serial(void); +void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4938_spi_init(int busid); +void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); int tx4938_report_pciclk(void); void tx4938_report_pci1clk(void); int tx4938_pciclk66_setup(void); struct pci_dev; int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); #endif diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h deleted file mode 100644 index 97dd7ad1a890..000000000000 --- a/include/asm-mips/txx9/txx927.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Common definitions for TX3927/TX4927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TXX9_TXX927_H -#define __ASM_TXX9_TXX927_H - -struct txx927_sio_reg { - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; -}; - -/* - * SIO - */ -/* SILCR : Line Control */ -#define TXx927_SILCR_SCS_MASK 0x00000060 -#define TXx927_SILCR_SCS_IMCLK 0x00000000 -#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXx927_SILCR_SCS_SCLK 0x00000040 -#define TXx927_SILCR_SCS_SCLK_BG 0x00000060 -#define TXx927_SILCR_UEPS 0x00000010 -#define TXx927_SILCR_UPEN 0x00000008 -#define TXx927_SILCR_USBL_MASK 0x00000004 -#define TXx927_SILCR_USBL_1BIT 0x00000004 -#define TXx927_SILCR_USBL_2BIT 0x00000000 -#define TXx927_SILCR_UMODE_MASK 0x00000003 -#define TXx927_SILCR_UMODE_8BIT 0x00000000 -#define TXx927_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXx927_SIDICR_TDE 0x00008000 -#define TXx927_SIDICR_RDE 0x00004000 -#define TXx927_SIDICR_TIE 0x00002000 -#define TXx927_SIDICR_RIE 0x00001000 -#define TXx927_SIDICR_SPIE 0x00000800 -#define TXx927_SIDICR_CTSAC 0x00000600 -#define TXx927_SIDICR_STIE_MASK 0x0000003f -#define TXx927_SIDICR_STIE_OERS 0x00000020 -#define TXx927_SIDICR_STIE_CTSS 0x00000010 -#define TXx927_SIDICR_STIE_RBRKD 0x00000008 -#define TXx927_SIDICR_STIE_TRDY 0x00000004 -#define TXx927_SIDICR_STIE_TXALS 0x00000002 -#define TXx927_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXx927_SIDISR_UBRK 0x00008000 -#define TXx927_SIDISR_UVALID 0x00004000 -#define TXx927_SIDISR_UFER 0x00002000 -#define TXx927_SIDISR_UPER 0x00001000 -#define TXx927_SIDISR_UOER 0x00000800 -#define TXx927_SIDISR_ERI 0x00000400 -#define TXx927_SIDISR_TOUT 0x00000200 -#define TXx927_SIDISR_TDIS 0x00000100 -#define TXx927_SIDISR_RDIS 0x00000080 -#define TXx927_SIDISR_STIS 0x00000040 -#define TXx927_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXx927_SICISR_OERS 0x00000020 -#define TXx927_SICISR_CTSS 0x00000010 -#define TXx927_SICISR_RBRKD 0x00000008 -#define TXx927_SICISR_TRDY 0x00000004 -#define TXx927_SICISR_TXALS 0x00000002 -#define TXx927_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXx927_SIFCR_SWRST 0x00008000 -#define TXx927_SIFCR_RDIL_MASK 0x00000180 -#define TXx927_SIFCR_RDIL_1 0x00000000 -#define TXx927_SIFCR_RDIL_4 0x00000080 -#define TXx927_SIFCR_RDIL_8 0x00000100 -#define TXx927_SIFCR_RDIL_12 0x00000180 -#define TXx927_SIFCR_RDIL_MAX 0x00000180 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_1 0x00000000 -#define TXx927_SIFCR_TDIL_4 0x00000001 -#define TXx927_SIFCR_TDIL_8 0x00000010 -#define TXx927_SIFCR_TDIL_MAX 0x00000010 -#define TXx927_SIFCR_TFRST 0x00000004 -#define TXx927_SIFCR_RFRST 0x00000002 -#define TXx927_SIFCR_FRSTE 0x00000001 -#define TXx927_SIO_TX_FIFO 8 -#define TXx927_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXx927_SIFLCR_RCS 0x00001000 -#define TXx927_SIFLCR_TES 0x00000800 -#define TXx927_SIFLCR_RTSSC 0x00000200 -#define TXx927_SIFLCR_RSDE 0x00000100 -#define TXx927_SIFLCR_TSDE 0x00000080 -#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e -#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e -#define TXx927_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXx927_SIBGR_BCLK_MASK 0x00000300 -#define TXx927_SIBGR_BCLK_T0 0x00000000 -#define TXx927_SIBGR_BCLK_T2 0x00000100 -#define TXx927_SIBGR_BCLK_T4 0x00000200 -#define TXx927_SIBGR_BCLK_T6 0x00000300 -#define TXx927_SIBGR_BRD_MASK 0x000000ff - -/* - * PIO - */ - -#endif /* __ASM_TXX9_TXX927_H */ diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h index 1c439e51b875..5620879be37f 100644 --- a/include/asm-mips/txx9irq.h +++ b/include/asm-mips/txx9irq.h @@ -14,8 +14,12 @@ #ifdef CONFIG_IRQ_CPU #define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) #else +#ifdef CONFIG_I8259 +#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) +#else #define TXX9_IRQ_BASE 0 #endif +#endif #ifdef CONFIG_CPU_TX39XX #define TXx9_MAX_IR 16 diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index 63a55337c2de..24d79e3abd8e 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -3,6 +3,7 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/of.h> /* Opcodes common to CPM1 and CPM2 */ @@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); int cpm_command(u32 command, u8 opcode); +int cpm2_gpiochip_add32(struct device_node *np); + #endif diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index 2c7fd9cee291..2a6fa0183ac9 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -12,6 +12,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm.h> +#include <sysdev/fsl_soc.h> #ifdef CONFIG_PPC_85xx #define CPM_MAP_ADDR (get_immrbase() + 0x80000) @@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr -extern void cpm_setbrg(uint brg, uint rate); -extern void cpm2_fastbrg(uint brg, uint rate, int div16); extern void cpm2_reset(void); +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + /* Function code bits, usually generic to devices. */ #define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ @@ -195,17 +226,6 @@ typedef struct smc_uart { #define SMCM_TX ((unsigned char)0x02) #define SMCM_RX ((unsigned char)0x01) -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - /* SCCs. */ #define SCC_GSMRH_IRP ((uint)0x00040000) diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index 5fc78c0be302..74c6f380b805 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -461,6 +461,8 @@ void pgtable_cache_init(void); return pt; } +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h index 4b7cb964ff35..89ec7056da28 100644 --- a/include/asm-s390/hardirq.h +++ b/include/asm-s390/hardirq.h @@ -34,4 +34,18 @@ typedef struct { void clock_comparator_work(void); +static inline unsigned long long local_tick_disable(void) +{ + unsigned long long old; + + old = S390_lowcore.clock_comparator; + S390_lowcore.clock_comparator = -1ULL; + return old; +} + +static inline void local_tick_enable(unsigned long long comp) +{ + S390_lowcore.clock_comparator = comp; +} + #endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h index eaca6dff5405..1171e6d144a3 100644 --- a/include/asm-s390/ipl.h +++ b/include/asm-s390/ipl.h @@ -159,7 +159,8 @@ enum diag308_vm_flags { }; enum diag308_rc { - DIAG308_RC_OK = 1, + DIAG308_RC_OK = 0x0001, + DIAG308_RC_NOCONFIG = 0x0102, }; extern int diag308(unsigned long subcode, void *addr); diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h index 7bdc0fe15691..825503cf3dc2 100644 --- a/include/asm-s390/schid.h +++ b/include/asm-s390/schid.h @@ -11,6 +11,7 @@ struct subchannel_id { } __attribute__ ((packed, aligned(4))); #ifdef __KERNEL__ +#include <linux/string.h> /* Helper function for sane state of pre-allocated subchannel_id. */ static inline void diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 4ba14e463e83..2bd9faeb3919 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -65,7 +65,6 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) -#define MACHINE_FLAG_P390 (1UL << 2) #define MACHINE_FLAG_CSP (1UL << 3) #define MACHINE_FLAG_MVPG (1UL << 4) #define MACHINE_FLAG_DIAG44 (1UL << 5) diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h index 583da807ea97..c8ad350d1444 100644 --- a/include/asm-s390/unistd.h +++ b/include/asm-s390/unistd.h @@ -259,7 +259,13 @@ #define __NR_timerfd_create 319 #define __NR_timerfd_settime 320 #define __NR_timerfd_gettime 321 -#define NR_syscalls 322 +#define __NR_signalfd4 322 +#define __NR_eventfd2 323 +#define __NR_inotify_init1 324 +#define __NR_pipe2 325 +#define __NR_dup3 326 +#define __NR_epoll_create1 327 +#define NR_syscalls 328 /* * There are some system calls that are not present on 64 bit, some diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h deleted file mode 100644 index 795ddd6856a3..000000000000 --- a/include/asm-sh/cpu-sh2a/addrspace.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H -#define __ASM_SH_CPU_SH2A_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x00000000 -#define P2SEG 0x20000000 -#define P3SEG 0x00000000 -#define P4SEG 0x80000000 - -#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h deleted file mode 100644 index fa3186c73350..000000000000 --- a/include/asm-sh/cpu-sh2a/cacheflush.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/cacheflush.h> diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h deleted file mode 100644 index 0d5ad85c1de8..000000000000 --- a/include/asm-sh/cpu-sh2a/dma.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/dma.h> diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h deleted file mode 100644 index cd2387f7db9e..000000000000 --- a/include/asm-sh/cpu-sh2a/mmu_context.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/mmu_context.h> diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h deleted file mode 100644 index fee504adf11e..000000000000 --- a/include/asm-sh/cpu-sh2a/timer.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/timer.h> diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h deleted file mode 100644 index cf28062b96a2..000000000000 --- a/include/asm-sh/cpu-sh2a/ubc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/ubc.h> diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h deleted file mode 100644 index c1b3e2488478..000000000000 --- a/include/asm-sh/cpu-sh2a/watchdog.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm/cpu-sh2/watchdog.h> diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h deleted file mode 100644 index 0f94726c7d62..000000000000 --- a/include/asm-sh/cpu-sh3/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-3 CPUs. - */ -#ifndef __ASM_CPU_SH3_ADDRSPACE_H -#define __ASM_CPU_SH3_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h deleted file mode 100644 index f70d8ef76a15..000000000000 --- a/include/asm-sh/cpu-sh3/cacheflush.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-sh/cpu-sh3/cacheflush.h - * - * Copyright (C) 1999 Niibe Yutaka - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH3_CACHEFLUSH_H -#define __ASM_CPU_SH3_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-3, so - * we don't need them. - */ - -#if defined(CONFIG_SH7705_CACHE_32KB) - -/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the - * SH4. Unlike the SH4 this is a unified cache so we need to do some work - * in mmap when 'exec'ing a new binary - */ - /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ -#define CACHE_ALIAS 0x00001000 - -#define PG_mapped PG_arch_1 - -void flush_cache_all(void); -void flush_cache_mm(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -void flush_dcache_page(struct page *pg); -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -#else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#endif - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* SH3 has unified cache so no special action needed here */ -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define p3_cache_init() do { } while (0) - -#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h deleted file mode 100644 index 319404aaee37..000000000000 --- a/include/asm-sh/cpu-sh3/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH3_RTC_H -#define __ASM_SH_CPU_SH3_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h deleted file mode 100644 index 17310dc03dcd..000000000000 --- a/include/asm-sh/cpu-sh3/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH3_SIGCONTEXT_H -#define __ASM_CPU_SH3_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h deleted file mode 100644 index 88da9b341a36..000000000000 --- a/include/asm-sh/cpu-sh5/timer.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_TIMER_H -#define __ASM_SH_CPU_SH5_TIMER_H - -#endif /* __ASM_SH_CPU_SH5_TIMER_H */ diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index ecc8061904a9..5f888cc5be49 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -7,6 +7,8 @@ extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; +extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); + #ifdef CONFIG_GART_IOMMU extern int gart_iommu_aperture; extern int gart_iommu_aperture_allowed; diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 4c4142c5aa6e..a26f565e8189 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -97,6 +97,7 @@ header-y += ioctl.h header-y += ip6_tunnel.h header-y += ipmi_msgdefs.h header-y += ipsec.h +header-y += ip_vs.h header-y += ipx.h header-y += irda.h header-y += iso_fs.h diff --git a/include/linux/connector.h b/include/linux/connector.h index 96a89d3d6727..5c7f9468f753 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -38,8 +38,9 @@ #define CN_W1_VAL 0x1 #define CN_IDX_V86D 0x4 #define CN_VAL_V86D_UVESAFB 0x1 +#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ -#define CN_NETLINK_USERS 5 +#define CN_NETLINK_USERS 6 /* * Maximum connector's message size. diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 2270ca5ec631..6fd5668aa572 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -106,6 +106,7 @@ struct cpufreq_policy { #define CPUFREQ_ADJUST (0) #define CPUFREQ_INCOMPATIBLE (1) #define CPUFREQ_NOTIFY (2) +#define CPUFREQ_START (3) #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */ #define CPUFREQ_SHARED_TYPE_HW (1) /* HW does needed coordination */ diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 96d0509fb8d8..d3219d73f8e6 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -287,7 +287,7 @@ static inline const cpumask_t *get_cpu_mask(unsigned int cpu) * gcc optimizes it out (it's a constant) and there's no huge stack * variable created: */ -#define cpumask_of_cpu(cpu) ({ *get_cpu_mask(cpu); }) +#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) diff --git a/include/linux/file.h b/include/linux/file.h index 27c64bdc68c9..a20259e248a5 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd); extern struct file *fget_light(unsigned int fd, int *fput_needed); extern void set_close_on_exec(unsigned int fd, int flag); extern void put_filp(struct file *); +extern int alloc_fd(unsigned start, unsigned flags); extern int get_unused_fd(void); -extern int get_unused_fd_flags(int flags); +#define get_unused_fd_flags(flags) alloc_fd(0, (flags)) extern void put_unused_fd(unsigned int fd); extern void fd_install(unsigned int fd, struct file *file); diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h index f8598f583944..c975caf75385 100644 --- a/include/linux/iommu-helper.h +++ b/include/linux/iommu-helper.h @@ -8,4 +8,3 @@ extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size, unsigned long align_mask); extern void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr); -extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 2cd07cc29687..22d2115458c6 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -118,6 +118,10 @@ extern int allocate_resource(struct resource *root, struct resource *new, int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); resource_size_t resource_alignment(struct resource *res); +static inline resource_size_t resource_size(struct resource *res) +{ + return res->end - res->start + 1; +} /* Convenience shorthand with allocation */ #define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name)) diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h new file mode 100644 index 000000000000..ec6eb49af2d8 --- /dev/null +++ b/include/linux/ip_vs.h @@ -0,0 +1,245 @@ +/* + * IP Virtual Server + * data structure and functionality definitions + */ + +#ifndef _IP_VS_H +#define _IP_VS_H + +#include <linux/types.h> /* For __beXX types in userland */ + +#define IP_VS_VERSION_CODE 0x010201 +#define NVERSION(version) \ + (version >> 16) & 0xFF, \ + (version >> 8) & 0xFF, \ + version & 0xFF + +/* + * Virtual Service Flags + */ +#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ +#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ + +/* + * Destination Server Flags + */ +#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */ +#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */ + +/* + * IPVS sync daemon states + */ +#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */ +#define IP_VS_STATE_MASTER 0x0001 /* started as master */ +#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */ + +/* + * IPVS socket options + */ +#define IP_VS_BASE_CTL (64+1024+64) /* base */ + +#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */ +#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1) +#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2) +#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3) +#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4) +#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5) +#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6) +#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7) +#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8) +#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9) +#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) +#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11) +#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12) +#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13) +#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14) +#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15) +#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO + +#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL +#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1) +#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2) +#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3) +#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4) +#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */ +#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6) +#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7) +#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON + + +/* + * IPVS Connection Flags + */ +#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */ +#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */ +#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */ +#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */ +#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */ +#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */ +#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */ +#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */ +#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */ +#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */ +#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */ +#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */ +#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */ +#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */ +#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */ + +#define IP_VS_SCHEDNAME_MAXLEN 16 +#define IP_VS_IFNAME_MAXLEN 16 + + +/* + * The struct ip_vs_service_user and struct ip_vs_dest_user are + * used to set IPVS rules through setsockopt. + */ +struct ip_vs_service_user { + /* virtual service addresses */ + u_int16_t protocol; + __be32 addr; /* virtual ip address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* virtual service options */ + char sched_name[IP_VS_SCHEDNAME_MAXLEN]; + unsigned flags; /* virtual service flags */ + unsigned timeout; /* persistent timeout in sec */ + __be32 netmask; /* persistent netmask */ +}; + + +struct ip_vs_dest_user { + /* destination server address */ + __be32 addr; + __be16 port; + + /* real server options */ + unsigned conn_flags; /* connection flags */ + int weight; /* destination weight */ + + /* thresholds for active connections */ + u_int32_t u_threshold; /* upper threshold */ + u_int32_t l_threshold; /* lower threshold */ +}; + + +/* + * IPVS statistics object (for user space) + */ +struct ip_vs_stats_user +{ + __u32 conns; /* connections scheduled */ + __u32 inpkts; /* incoming packets */ + __u32 outpkts; /* outgoing packets */ + __u64 inbytes; /* incoming bytes */ + __u64 outbytes; /* outgoing bytes */ + + __u32 cps; /* current connection rate */ + __u32 inpps; /* current in packet rate */ + __u32 outpps; /* current out packet rate */ + __u32 inbps; /* current in byte rate */ + __u32 outbps; /* current out byte rate */ +}; + + +/* The argument to IP_VS_SO_GET_INFO */ +struct ip_vs_getinfo { + /* version number */ + unsigned int version; + + /* size of connection hash table */ + unsigned int size; + + /* number of virtual services */ + unsigned int num_services; +}; + + +/* The argument to IP_VS_SO_GET_SERVICE */ +struct ip_vs_service_entry { + /* which service: user fills in these */ + u_int16_t protocol; + __be32 addr; /* virtual address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* service options */ + char sched_name[IP_VS_SCHEDNAME_MAXLEN]; + unsigned flags; /* virtual service flags */ + unsigned timeout; /* persistent timeout */ + __be32 netmask; /* persistent netmask */ + + /* number of real servers */ + unsigned int num_dests; + + /* statistics */ + struct ip_vs_stats_user stats; +}; + + +struct ip_vs_dest_entry { + __be32 addr; /* destination address */ + __be16 port; + unsigned conn_flags; /* connection flags */ + int weight; /* destination weight */ + + u_int32_t u_threshold; /* upper threshold */ + u_int32_t l_threshold; /* lower threshold */ + + u_int32_t activeconns; /* active connections */ + u_int32_t inactconns; /* inactive connections */ + u_int32_t persistconns; /* persistent connections */ + + /* statistics */ + struct ip_vs_stats_user stats; +}; + + +/* The argument to IP_VS_SO_GET_DESTS */ +struct ip_vs_get_dests { + /* which service: user fills in these */ + u_int16_t protocol; + __be32 addr; /* virtual address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* number of real servers */ + unsigned int num_dests; + + /* the real servers */ + struct ip_vs_dest_entry entrytable[0]; +}; + + +/* The argument to IP_VS_SO_GET_SERVICES */ +struct ip_vs_get_services { + /* number of virtual services */ + unsigned int num_services; + + /* service table */ + struct ip_vs_service_entry entrytable[0]; +}; + + +/* The argument to IP_VS_SO_GET_TIMEOUT */ +struct ip_vs_timeout_user { + int tcp_timeout; + int tcp_fin_timeout; + int udp_timeout; +}; + + +/* The argument to IP_VS_SO_GET_DAEMON */ +struct ip_vs_daemon_user { + /* sync daemon state (master/backup) */ + int state; + + /* multicast interface name */ + char mcast_ifn[IP_VS_IFNAME_MAXLEN]; + + /* SyncID we belong to */ + int syncid; +}; + +#endif /* _IP_VS_H */ diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h index 57aefa160a92..b96144887444 100644 --- a/include/linux/kallsyms.h +++ b/include/linux/kallsyms.h @@ -108,8 +108,7 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr) static inline void print_ip_sym(unsigned long ip) { - printk("[<%p>]", (void *) ip); - print_symbol(" %s\n", ip); + printk("[<%p>] %pS\n", (void *) ip, (void *) ip); } #endif /*_LINUX_KALLSYMS_H*/ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fdbbf72ca2eb..aaa998f65c7a 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -75,6 +75,12 @@ extern const char linux_proc_banner[]; */ #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) +/** + * lower_32_bits - return bits 0-31 of a number + * @n: the number we're accessing + */ +#define lower_32_bits(n) ((u32)(n)) + #define KERN_EMERG "<0>" /* system is unusable */ #define KERN_ALERT "<1>" /* action must be taken immediately */ #define KERN_CRIT "<2>" /* critical conditions */ diff --git a/include/linux/maple.h b/include/linux/maple.h index 523a286bb477..c853b1066018 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -2,6 +2,7 @@ #define __LINUX_MAPLE_H #include <linux/device.h> +#include <mach/maple.h> extern struct bus_type maple_bus_type; @@ -33,6 +34,7 @@ struct mapleq { void *sendbuf, *recvbuf, *recvbufdcsp; unsigned char length; enum maple_code command; + struct mutex mutex; }; struct maple_devinfo { @@ -69,7 +71,9 @@ void maple_getcond_callback(struct maple_device *dev, unsigned long interval, unsigned long function); int maple_driver_register(struct device_driver *drv); -void maple_add_packet(struct mapleq *mq); +int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, + u32 command, u32 length, void *data); +void maple_clear_dev(struct maple_device *mdev); #define to_maple_dev(n) container_of(n, struct maple_device, dev) #define to_maple_driver(n) container_of(n, struct maple_driver, drv) diff --git a/include/linux/mm.h b/include/linux/mm.h index 866a3dbe5c75..335288bff1b7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -744,6 +744,8 @@ struct zap_details { struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, pte_t pte); +int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, + unsigned long size); unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, unsigned long size, struct zap_details *); unsigned long unmap_vmas(struct mmu_gather **tlb, @@ -1041,7 +1043,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn, extern void get_pfn_range_for_nid(unsigned int nid, unsigned long *start_pfn, unsigned long *end_pfn); extern unsigned long find_min_pfn_with_active_regions(void); -extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); typedef int (*work_fn_t)(unsigned long, unsigned long, void *); diff --git a/include/linux/mount.h b/include/linux/mount.h index b5efaa2132ab..30a1d63b6fb5 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type, struct nameidata; -extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +struct path; +extern int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist); extern void mark_mounts_for_expiry(struct list_head *mounts); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 4ed40caff4e5..922636548558 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -272,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr) printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ -#define DEBUG(n, args...) do { } while(0) +#define DEBUG(n, args...) \ + do { \ + if (0) \ + printk(KERN_INFO args); \ + } while(0) #endif /* CONFIG_MTD_DEBUG */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 83f678702dff..81774e5facf4 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -177,7 +177,9 @@ typedef enum { #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) -#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT)) +/* Large page NAND with SOFT_ECC should support subpage reads */ +#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ + && (chip->page_shift > 9)) /* Mask to zero out the chip options, which come from the id table */ #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b4d056ceab96..ee583f642a9f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -440,6 +440,7 @@ static inline void napi_synchronize(const struct napi_struct *n) enum netdev_queue_state_t { __QUEUE_STATE_XOFF, + __QUEUE_STATE_FROZEN, }; struct netdev_queue { @@ -636,7 +637,7 @@ struct net_device unsigned int real_num_tx_queues; unsigned long tx_queue_len; /* Max frames per queue allowed */ - + spinlock_t tx_global_lock; /* * One part is mostly used on xmit path (device) */ @@ -1099,6 +1100,11 @@ static inline int netif_queue_stopped(const struct net_device *dev) return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0)); } +static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue) +{ + return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state); +} + /** * netif_running - test if up * @dev: network device @@ -1475,6 +1481,26 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq) txq->xmit_lock_owner = smp_processor_id(); } +static inline int __netif_tx_trylock(struct netdev_queue *txq) +{ + int ok = spin_trylock(&txq->_xmit_lock); + if (likely(ok)) + txq->xmit_lock_owner = smp_processor_id(); + return ok; +} + +static inline void __netif_tx_unlock(struct netdev_queue *txq) +{ + txq->xmit_lock_owner = -1; + spin_unlock(&txq->_xmit_lock); +} + +static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) +{ + txq->xmit_lock_owner = -1; + spin_unlock_bh(&txq->_xmit_lock); +} + /** * netif_tx_lock - grab network device transmit lock * @dev: network device @@ -1484,12 +1510,23 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq) */ static inline void netif_tx_lock(struct net_device *dev) { - int cpu = smp_processor_id(); unsigned int i; + int cpu; + spin_lock(&dev->tx_global_lock); + cpu = smp_processor_id(); for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); + + /* We are the only thread of execution doing a + * freeze, but we have to grab the _xmit_lock in + * order to synchronize with threads which are in + * the ->hard_start_xmit() handler and already + * checked the frozen bit. + */ __netif_tx_lock(txq, cpu); + set_bit(__QUEUE_STATE_FROZEN, &txq->state); + __netif_tx_unlock(txq); } } @@ -1499,40 +1536,22 @@ static inline void netif_tx_lock_bh(struct net_device *dev) netif_tx_lock(dev); } -static inline int __netif_tx_trylock(struct netdev_queue *txq) -{ - int ok = spin_trylock(&txq->_xmit_lock); - if (likely(ok)) - txq->xmit_lock_owner = smp_processor_id(); - return ok; -} - -static inline int netif_tx_trylock(struct net_device *dev) -{ - return __netif_tx_trylock(netdev_get_tx_queue(dev, 0)); -} - -static inline void __netif_tx_unlock(struct netdev_queue *txq) -{ - txq->xmit_lock_owner = -1; - spin_unlock(&txq->_xmit_lock); -} - -static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) -{ - txq->xmit_lock_owner = -1; - spin_unlock_bh(&txq->_xmit_lock); -} - static inline void netif_tx_unlock(struct net_device *dev) { unsigned int i; for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); - __netif_tx_unlock(txq); - } + /* No need to grab the _xmit_lock here. If the + * queue is not stopped for another reason, we + * force a schedule. + */ + clear_bit(__QUEUE_STATE_FROZEN, &txq->state); + if (!test_bit(__QUEUE_STATE_XOFF, &txq->state)) + __netif_schedule(txq->qdisc); + } + spin_unlock(&dev->tx_global_lock); } static inline void netif_tx_unlock_bh(struct net_device *dev) @@ -1556,13 +1575,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev) static inline void netif_tx_disable(struct net_device *dev) { unsigned int i; + int cpu; - netif_tx_lock_bh(dev); + local_bh_disable(); + cpu = smp_processor_id(); for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); + + __netif_tx_lock(txq, cpu); netif_tx_stop_queue(txq); + __netif_tx_unlock(txq); } - netif_tx_unlock_bh(dev); + local_bh_enable(); } static inline void netif_addr_lock(struct net_device *dev) diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 22ce29995f13..a049df4f2236 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -30,6 +30,9 @@ enum tcp_conntrack { /* Be liberal in window checking */ #define IP_CT_TCP_FLAG_BE_LIBERAL 0x08 +/* Has unacknowledged data */ +#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10 + struct nf_ct_tcp_flags { u_int8_t flags; u_int8_t mask; diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 54590a9a103e..25aaccdb2f26 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page) { smp_wmb(); __set_bit(PG_uptodate, &(page)->flags); -#ifdef CONFIG_S390 - page_clear_dirty(page); -#endif } static inline void SetPageUptodate(struct page *page) diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index a39b38ccdc97..69ed3cb1197a 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -143,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page) return 1; } +/* + * Same as above, but add instead of inc (could just be merged) + */ +static inline int page_cache_add_speculative(struct page *page, int count) +{ + VM_BUG_ON(in_interrupt()); + +#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU) +# ifdef CONFIG_PREEMPT + VM_BUG_ON(!in_atomic()); +# endif + VM_BUG_ON(page_count(page) == 0); + atomic_add(count, &page->_count); + +#else + if (unlikely(!atomic_add_unless(&page->_count, count, 0))) + return 0; +#endif + VM_BUG_ON(PageCompound(page) && page != compound_head(page)); + + return 1; +} + static inline int page_freeze_refs(struct page *page, int count) { return likely(atomic_cmpxchg(&page->_count, count, 0) == count); diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 68ed19ccf1f7..ea96ead1d39d 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -78,6 +78,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_EMPTY, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_AVG, + POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 742187f7a05c..ca6b9b5c8d52 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -43,6 +43,8 @@ int dquot_mark_dquot_dirty(struct dquot *dquot); int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount); +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path); int vfs_quota_on_mount(struct super_block *sb, char *qf_name, int format_id, int type); int vfs_quota_off(struct super_block *sb, int type, int remount); diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h new file mode 100644 index 000000000000..e84b0a9feda5 --- /dev/null +++ b/include/linux/regulator/bq24022.h @@ -0,0 +1,21 @@ +/* + * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) + * 1-Cell Li-Ion Charger connected via GPIOs. + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/** + * bq24022_mach_info - platform data for bq24022 + * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging + * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA + */ +struct bq24022_mach_info { + int gpio_nce; + int gpio_iset2; +}; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h new file mode 100644 index 000000000000..afdc4558bb94 --- /dev/null +++ b/include/linux/regulator/consumer.h @@ -0,0 +1,284 @@ +/* + * consumer.h -- SoC Regulator consumer support. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Consumer Interface. + * + * A Power Management Regulator framework for SoC based devices. + * Features:- + * o Voltage and current level control. + * o Operating mode control. + * o Regulator status. + * o sysfs entries for showing client devices and status + * + * EXPERIMENTAL FEATURES: + * Dynamic Regulator operating Mode Switching (DRMS) - allows regulators + * to use most efficient operating mode depending upon voltage and load and + * is transparent to client drivers. + * + * e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during + * IO and 1mA at idle. Device z draws 100mA when under load and 5mA when + * idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA + * but this drops rapidly to 60% when below 100mA. Regulator r has > 90% + * efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate + * in normal mode for loads > 10mA and in IDLE mode for load <= 10mA. + * + */ + +#ifndef __LINUX_REGULATOR_CONSUMER_H_ +#define __LINUX_REGULATOR_CONSUMER_H_ + +/* + * Regulator operating modes. + * + * Regulators can run in a variety of different operating modes depending on + * output load. This allows further system power savings by selecting the + * best (and most efficient) regulator mode for a desired load. + * + * Most drivers will only care about NORMAL. The modes below are generic and + * will probably not match the naming convention of your regulator data sheet + * but should match the use cases in the datasheet. + * + * In order of power efficiency (least efficient at top). + * + * Mode Description + * FAST Regulator can handle fast changes in it's load. + * e.g. useful in CPU voltage & frequency scaling where + * load can quickly increase with CPU frequency increases. + * + * NORMAL Normal regulator power supply mode. Most drivers will + * use this mode. + * + * IDLE Regulator runs in a more efficient mode for light + * loads. Can be used for devices that have a low power + * requirement during periods of inactivity. This mode + * may be more noisy than NORMAL and may not be able + * to handle fast load switching. + * + * STANDBY Regulator runs in the most efficient mode for very + * light loads. Can be used by devices when they are + * in a sleep/standby state. This mode is likely to be + * the most noisy and may not be able to handle fast load + * switching. + * + * NOTE: Most regulators will only support a subset of these modes. Some + * will only just support NORMAL. + * + * These modes can be OR'ed together to make up a mask of valid register modes. + */ + +#define REGULATOR_MODE_FAST 0x1 +#define REGULATOR_MODE_NORMAL 0x2 +#define REGULATOR_MODE_IDLE 0x4 +#define REGULATOR_MODE_STANDBY 0x8 + +/* + * Regulator notifier events. + * + * UNDER_VOLTAGE Regulator output is under voltage. + * OVER_CURRENT Regulator output current is too high. + * REGULATION_OUT Regulator output is out of regulation. + * FAIL Regulator output has failed. + * OVER_TEMP Regulator over temp. + * FORCE_DISABLE Regulator shut down by software. + * + * NOTE: These events can be OR'ed together when passed into handler. + */ + +#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 +#define REGULATOR_EVENT_OVER_CURRENT 0x02 +#define REGULATOR_EVENT_REGULATION_OUT 0x04 +#define REGULATOR_EVENT_FAIL 0x08 +#define REGULATOR_EVENT_OVER_TEMP 0x10 +#define REGULATOR_EVENT_FORCE_DISABLE 0x20 + +struct regulator; + +/** + * struct regulator_bulk_data - Data used for bulk regulator operations. + * + * @supply The name of the supply. Initialised by the user before + * using the bulk regulator APIs. + * @consumer The regulator consumer for the supply. This will be managed + * by the bulk API. + * + * The regulator APIs provide a series of regulator_bulk_() API calls as + * a convenience to consumers which require multiple supplies. This + * structure is used to manage data for these calls. + */ +struct regulator_bulk_data { + const char *supply; + struct regulator *consumer; +}; + +#if defined(CONFIG_REGULATOR) + +/* regulator get and put */ +struct regulator *__must_check regulator_get(struct device *dev, + const char *id); +void regulator_put(struct regulator *regulator); + +/* regulator output control and status */ +int regulator_enable(struct regulator *regulator); +int regulator_disable(struct regulator *regulator); +int regulator_force_disable(struct regulator *regulator); +int regulator_is_enabled(struct regulator *regulator); + +int regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers); +int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers); +int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers); +void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers); + +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); +int regulator_get_voltage(struct regulator *regulator); +int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA); +int regulator_get_current_limit(struct regulator *regulator); + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +/* regulator notifier block */ +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +/* driver data - core doesn't touch */ +void *regulator_get_drvdata(struct regulator *regulator); +void regulator_set_drvdata(struct regulator *regulator, void *data); + +#else + +/* + * Make sure client drivers will still build on systems with no software + * controllable voltage or current regulators. + */ +static inline struct regulator *__must_check regulator_get(struct device *dev, + const char *id) +{ + /* Nothing except the stubbed out regulator API should be + * looking at the value except to check if it is an error + * value so the actual return value doesn't matter. + */ + return (struct regulator *)id; +} +static inline void regulator_put(struct regulator *regulator) +{ +} + +static inline int regulator_enable(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_disable(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_is_enabled(struct regulator *regulator) +{ + return 1; +} + +static inline int regulator_bulk_get(struct device *dev, + int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers) +{ +} + +static inline int regulator_set_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ + return 0; +} + +static inline int regulator_get_voltage(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA) +{ + return 0; +} + +static inline int regulator_get_current_limit(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_set_mode(struct regulator *regulator, + unsigned int mode) +{ + return 0; +} + +static inline unsigned int regulator_get_mode(struct regulator *regulator) +{ + return REGULATOR_MODE_NORMAL; +} + +static inline int regulator_set_optimum_mode(struct regulator *regulator, + int load_uA) +{ + return REGULATOR_MODE_NORMAL; +} + +static inline int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + +static inline int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + +static inline void *regulator_get_drvdata(struct regulator *regulator) +{ + return NULL; +} + +static inline void regulator_set_drvdata(struct regulator *regulator, + void *data) +{ +} + +#endif + +#endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h new file mode 100644 index 000000000000..1d712c7172a2 --- /dev/null +++ b/include/linux/regulator/driver.h @@ -0,0 +1,99 @@ +/* + * driver.h -- SoC Regulator driver support. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Driver Interface. + */ + +#ifndef __LINUX_REGULATOR_DRIVER_H_ +#define __LINUX_REGULATOR_DRIVER_H_ + +#include <linux/device.h> +#include <linux/regulator/consumer.h> + +struct regulator_constraints; +struct regulator_dev; + +/** + * struct regulator_ops - regulator operations. + * + * This struct describes regulator operations. + */ +struct regulator_ops { + + /* get/set regulator voltage */ + int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); + int (*get_voltage) (struct regulator_dev *); + + /* get/set regulator current */ + int (*set_current_limit) (struct regulator_dev *, + int min_uA, int max_uA); + int (*get_current_limit) (struct regulator_dev *); + + /* enable/disable regulator */ + int (*enable) (struct regulator_dev *); + int (*disable) (struct regulator_dev *); + int (*is_enabled) (struct regulator_dev *); + + /* get/set regulator operating mode (defined in regulator.h) */ + int (*set_mode) (struct regulator_dev *, unsigned int mode); + unsigned int (*get_mode) (struct regulator_dev *); + + /* get most efficient regulator operating mode for load */ + unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, + int output_uV, int load_uA); + + /* the operations below are for configuration of regulator state when + * it's parent PMIC enters a global STANBY/HIBERNATE state */ + + /* set regulator suspend voltage */ + int (*set_suspend_voltage) (struct regulator_dev *, int uV); + + /* enable/disable regulator in suspend state */ + int (*set_suspend_enable) (struct regulator_dev *); + int (*set_suspend_disable) (struct regulator_dev *); + + /* set regulator suspend operating mode (defined in regulator.h) */ + int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); +}; + +/* + * Regulators can either control voltage or current. + */ +enum regulator_type { + REGULATOR_VOLTAGE, + REGULATOR_CURRENT, +}; + +/** + * struct regulator_desc - Regulator descriptor + * + */ +struct regulator_desc { + const char *name; + int id; + struct regulator_ops *ops; + int irq; + enum regulator_type type; + struct module *owner; +}; + + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); +void regulator_unregister(struct regulator_dev *rdev); + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); + +void *rdev_get_drvdata(struct regulator_dev *rdev); +int rdev_get_id(struct regulator_dev *rdev); + +#endif diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h new file mode 100644 index 000000000000..1387a5d2190e --- /dev/null +++ b/include/linux/regulator/fixed.h @@ -0,0 +1,22 @@ +/* + * fixed.h + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#ifndef __REGULATOR_FIXED_H +#define __REGULATOR_FIXED_H + +struct fixed_voltage_config { + const char *supply_name; + int microvolts; +}; + +#endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h new file mode 100644 index 000000000000..11e737dbfcf2 --- /dev/null +++ b/include/linux/regulator/machine.h @@ -0,0 +1,104 @@ +/* + * machine.h -- SoC Regulator support, machine/board driver API. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Machine/Board Interface. + */ + +#ifndef __LINUX_REGULATOR_MACHINE_H_ +#define __LINUX_REGULATOR_MACHINE_H_ + +#include <linux/regulator/consumer.h> +#include <linux/suspend.h> + +struct regulator; + +/* + * Regulator operation constraint flags. These flags are used to enable + * certain regulator operations and can be OR'ed together. + * + * VOLTAGE: Regulator output voltage can be changed by software on this + * board/machine. + * CURRENT: Regulator output current can be changed by software on this + * board/machine. + * MODE: Regulator operating mode can be changed by software on this + * board/machine. + * STATUS: Regulator can be enabled and disabled. + * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator. + */ + +#define REGULATOR_CHANGE_VOLTAGE 0x1 +#define REGULATOR_CHANGE_CURRENT 0x2 +#define REGULATOR_CHANGE_MODE 0x4 +#define REGULATOR_CHANGE_STATUS 0x8 +#define REGULATOR_CHANGE_DRMS 0x10 + +/** + * struct regulator_state - regulator state during low power syatem states + * + * This describes a regulators state during a system wide low power state. + */ +struct regulator_state { + int uV; /* suspend voltage */ + unsigned int mode; /* suspend regulator operating mode */ + int enabled; /* is regulator enabled in this suspend state */ +}; + +/** + * struct regulation_constraints - regulator operating constraints. + * + * This struct describes regulator and board/machine specific constraints. + */ +struct regulation_constraints { + + char *name; + + /* voltage output range (inclusive) - for voltage control */ + int min_uV; + int max_uV; + + /* current output range (inclusive) - for current control */ + int min_uA; + int max_uA; + + /* valid regulator operating modes for this machine */ + unsigned int valid_modes_mask; + + /* valid operations for regulator on this machine */ + unsigned int valid_ops_mask; + + /* regulator input voltage - only if supply is another regulator */ + int input_uV; + + /* regulator suspend states for global PMIC STANDBY/HIBERNATE */ + struct regulator_state state_disk; + struct regulator_state state_mem; + struct regulator_state state_standby; + suspend_state_t initial_state; /* suspend state to set at init */ + + /* constriant flags */ + unsigned always_on:1; /* regulator never off when system is on */ + unsigned boot_on:1; /* bootloader/firmware enabled regulator */ + unsigned apply_uV:1; /* apply uV constraint iff min == max */ +}; + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +const char *regulator_get_supply(const char *regulator); + +int regulator_set_machine_constraints(const char *regulator, + struct regulation_constraints *constraints); + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +int regulator_suspend_prepare(suspend_state_t state); + +#endif diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c5f6e54ec6ae..741d1a62cc3f 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -68,7 +68,8 @@ enum rfkill_state { * @user_claim_unsupported: Whether the hardware supports exclusive * RF-kill control by userspace. Set this before registering. * @user_claim: Set when the switch is controlled exlusively by userspace. - * @mutex: Guards switch state transitions + * @mutex: Guards switch state transitions. It serializes callbacks + * and also protects the state. * @data: Pointer to the RF button drivers private data which will be * passed along when toggling radio state. * @toggle_radio(): Mandatory handler to control state of the radio. @@ -89,12 +90,13 @@ struct rfkill { const char *name; enum rfkill_type type; - enum rfkill_state state; bool user_claim_unsupported; bool user_claim; + /* the mutex serializes callbacks and also protects + * the state */ struct mutex mutex; - + enum rfkill_state state; void *data; int (*toggle_radio)(void *data, enum rfkill_state state); int (*get_state)(void *data, enum rfkill_state *state); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7ea44f6621f2..cfcc45b3bef0 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -243,6 +243,7 @@ typedef unsigned char *sk_buff_data_t; * @tc_index: Traffic control index * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) + * @do_not_encrypt: set to prevent encryption of this frame * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -316,7 +317,10 @@ struct sk_buff { #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif - /* 14 bit hole */ +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + __u8 do_not_encrypt:1; +#endif + /* 0/13/14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 5df62ef1280c..7a6e6bba4a71 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -214,6 +214,8 @@ enum LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */ LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */ LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ + LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ + LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ __LINUX_MIB_MAX }; diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 9a51ebad3f1f..cbb59ebed4ae 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -3,254 +3,17 @@ * data structure and functionality definitions */ -#ifndef _IP_VS_H -#define _IP_VS_H - -#include <asm/types.h> /* For __uXX types */ -#include <linux/types.h> /* For __beXX types in userland */ - -#include <linux/sysctl.h> /* For ctl_path */ - -#define IP_VS_VERSION_CODE 0x010201 -#define NVERSION(version) \ - (version >> 16) & 0xFF, \ - (version >> 8) & 0xFF, \ - version & 0xFF - -/* - * Virtual Service Flags - */ -#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ -#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ - -/* - * Destination Server Flags - */ -#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */ -#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */ - -/* - * IPVS sync daemon states - */ -#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */ -#define IP_VS_STATE_MASTER 0x0001 /* started as master */ -#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */ - -/* - * IPVS socket options - */ -#define IP_VS_BASE_CTL (64+1024+64) /* base */ - -#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */ -#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1) -#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2) -#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3) -#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4) -#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5) -#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6) -#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7) -#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8) -#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9) -#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) -#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11) -#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12) -#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13) -#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14) -#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15) -#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO - -#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL -#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1) -#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2) -#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3) -#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4) -#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */ -#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6) -#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7) -#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON - - -/* - * IPVS Connection Flags - */ -#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */ -#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */ -#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */ -#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */ -#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */ -#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */ -#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */ -#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */ -#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */ -#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */ -#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */ -#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */ -#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */ -#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */ -#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */ - -/* Move it to better place one day, for now keep it unique */ -#define NFC_IPVS_PROPERTY 0x10000 - -#define IP_VS_SCHEDNAME_MAXLEN 16 -#define IP_VS_IFNAME_MAXLEN 16 - - -/* - * The struct ip_vs_service_user and struct ip_vs_dest_user are - * used to set IPVS rules through setsockopt. - */ -struct ip_vs_service_user { - /* virtual service addresses */ - u_int16_t protocol; - __be32 addr; /* virtual ip address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* virtual service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned flags; /* virtual service flags */ - unsigned timeout; /* persistent timeout in sec */ - __be32 netmask; /* persistent netmask */ -}; - - -struct ip_vs_dest_user { - /* destination server address */ - __be32 addr; - __be16 port; - - /* real server options */ - unsigned conn_flags; /* connection flags */ - int weight; /* destination weight */ - - /* thresholds for active connections */ - u_int32_t u_threshold; /* upper threshold */ - u_int32_t l_threshold; /* lower threshold */ -}; - - -/* - * IPVS statistics object (for user space) - */ -struct ip_vs_stats_user -{ - __u32 conns; /* connections scheduled */ - __u32 inpkts; /* incoming packets */ - __u32 outpkts; /* outgoing packets */ - __u64 inbytes; /* incoming bytes */ - __u64 outbytes; /* outgoing bytes */ - - __u32 cps; /* current connection rate */ - __u32 inpps; /* current in packet rate */ - __u32 outpps; /* current out packet rate */ - __u32 inbps; /* current in byte rate */ - __u32 outbps; /* current out byte rate */ -}; - - -/* The argument to IP_VS_SO_GET_INFO */ -struct ip_vs_getinfo { - /* version number */ - unsigned int version; - - /* size of connection hash table */ - unsigned int size; - - /* number of virtual services */ - unsigned int num_services; -}; - - -/* The argument to IP_VS_SO_GET_SERVICE */ -struct ip_vs_service_entry { - /* which service: user fills in these */ - u_int16_t protocol; - __be32 addr; /* virtual address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned flags; /* virtual service flags */ - unsigned timeout; /* persistent timeout */ - __be32 netmask; /* persistent netmask */ - - /* number of real servers */ - unsigned int num_dests; - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -struct ip_vs_dest_entry { - __be32 addr; /* destination address */ - __be16 port; - unsigned conn_flags; /* connection flags */ - int weight; /* destination weight */ - - u_int32_t u_threshold; /* upper threshold */ - u_int32_t l_threshold; /* lower threshold */ - - u_int32_t activeconns; /* active connections */ - u_int32_t inactconns; /* inactive connections */ - u_int32_t persistconns; /* persistent connections */ - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -/* The argument to IP_VS_SO_GET_DESTS */ -struct ip_vs_get_dests { - /* which service: user fills in these */ - u_int16_t protocol; - __be32 addr; /* virtual address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* number of real servers */ - unsigned int num_dests; - - /* the real servers */ - struct ip_vs_dest_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_SERVICES */ -struct ip_vs_get_services { - /* number of virtual services */ - unsigned int num_services; - - /* service table */ - struct ip_vs_service_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_TIMEOUT */ -struct ip_vs_timeout_user { - int tcp_timeout; - int tcp_fin_timeout; - int udp_timeout; -}; - - -/* The argument to IP_VS_SO_GET_DAEMON */ -struct ip_vs_daemon_user { - /* sync daemon state (master/backup) */ - int state; - - /* multicast interface name */ - char mcast_ifn[IP_VS_IFNAME_MAXLEN]; - - /* SyncID we belong to */ - int syncid; -}; +#ifndef _NET_IP_VS_H +#define _NET_IP_VS_H +#include <linux/ip_vs.h> /* definitions shared with userland */ +/* old ipvsadm versions still include this file directly */ #ifdef __KERNEL__ +#include <asm/types.h> /* for __uXX types */ + +#include <linux/sysctl.h> /* for ctl_path */ #include <linux/list.h> /* for struct list_head */ #include <linux/spinlock.h> /* for struct rwlock_t */ #include <asm/atomic.h> /* for struct atomic_t */ @@ -981,4 +744,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum) #endif /* __KERNEL__ */ -#endif /* _IP_VS_H */ +#endif /* _NET_IP_VS_H */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4dd3d93e1960..b52721008be8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -206,8 +206,6 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., * for combined 802.11g / 802.11b networks) @@ -220,7 +218,6 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the * through set_retry_limit configured long retry value - * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number @@ -253,7 +250,6 @@ struct ieee80211_bss_conf { */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), IEEE80211_TX_CTL_NO_ACK = BIT(4), @@ -263,7 +259,6 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), IEEE80211_TX_CTL_AMPDU = BIT(13), IEEE80211_TX_CTL_OFDM_HT = BIT(14), @@ -323,7 +318,6 @@ struct ieee80211_tx_info { struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; unsigned long jiffies; - int ifindex; u16 aid; s8 rts_cts_rate_idx, alt_retry_rate_idx; u8 retry_limit; @@ -746,7 +740,6 @@ enum ieee80211_tkip_key_type { * Measurement, Channel Switch, Quieting, TPC */ enum ieee80211_hw_flags { - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, diff --git a/init/calibrate.c b/init/calibrate.c index 7963e3fc51d9..a379c9061199 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void) loops_per_jiffy &= ~loopbit; } } - printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n", + printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n", loops_per_jiffy/(500000/HZ), (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); } diff --git a/init/main.c b/init/main.c index 20fdc9884b77..9c3b68b86ca0 100644 --- a/init/main.c +++ b/init/main.c @@ -635,10 +635,11 @@ asmlinkage void __init start_kernel(void) #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start && !initrd_below_start_ok && - page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) { + page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) { printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - " "disabling it.\n", - page_to_pfn(virt_to_page(initrd_start)), min_low_pfn); + page_to_pfn(virt_to_page((void *)initrd_start)), + min_low_pfn); initrd_start = 0; } #endif diff --git a/kernel/audit.c b/kernel/audit.c index e092f1c0ce30..4414e93d8750 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (status_get->mask & AUDIT_STATUS_ENABLED) { err = audit_set_enabled(status_get->enabled, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_FAILURE) { err = audit_set_failure(status_get->failure, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_PID) { int new_pid = status_get->pid; @@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) audit_pid = new_pid; audit_nlk_pid = NETLINK_CB(skb).pid; } - if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) + if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) { err = audit_set_rate_limit(status_get->rate_limit, loginuid, sessionid, sid); + if (err < 0) + return err; + } if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT) err = audit_set_backlog_limit(status_get->backlog_limit, loginuid, sessionid, sid); @@ -1366,7 +1371,7 @@ int audit_string_contains_control(const char *string, size_t len) { const unsigned char *p; for (p = string; p < (const unsigned char *)string + len && *p; p++) { - if (*p == '"' || *p < 0x21 || *p > 0x7f) + if (*p == '"' || *p < 0x21 || *p > 0x7e) return 1; } return 0; diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 98c50cc671bb..b7d354e2b0ef 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent, struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); audit_log_format(ab, - "op=updated rules specifying path="); + " op=updated rules specifying path="); audit_log_untrustedstring(ab, owatch->path); audit_log_format(ab, " with dev=%u ino=%lu\n", dev, ino); @@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent) struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); - audit_log_format(ab, "op=remove rule path="); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); + audit_log_format(ab, " op=remove rule path="); audit_log_untrustedstring(ab, w->path); if (r->filterkey) { audit_log_format(ab, " key="); diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 4699950e65bd..496c3dd37276 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -610,7 +610,7 @@ static int audit_filter_rules(struct task_struct *tsk, if (!result) return 0; } - if (rule->filterkey) + if (rule->filterkey && ctx) ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC); switch (rule->action) { case AUDIT_NEVER: *state = AUDIT_DISABLED; break; @@ -2375,7 +2375,7 @@ int __audit_signal_info(int sig, struct task_struct *t) struct audit_context *ctx = tsk->audit_context; if (audit_pid && t->tgid == audit_pid) { - if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) { + if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) { audit_sig_pid = tsk->pid; if (tsk->loginuid != -1) audit_sig_uid = tsk->loginuid; diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 657f8f8d93a5..13932abde159 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set( return NULL; } +static void free_cg_links(struct list_head *tmp) +{ + struct cg_cgroup_link *link; + struct cg_cgroup_link *saved_link; + + list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) { + list_del(&link->cgrp_link_list); + kfree(link); + } +} + /* * allocate_cg_links() allocates "count" cg_cgroup_link structures * and chains them on tmp through their cgrp_link_list fields. Returns 0 on @@ -363,17 +374,12 @@ static struct css_set *find_existing_css_set( static int allocate_cg_links(int count, struct list_head *tmp) { struct cg_cgroup_link *link; - struct cg_cgroup_link *saved_link; int i; INIT_LIST_HEAD(tmp); for (i = 0; i < count; i++) { link = kmalloc(sizeof(*link), GFP_KERNEL); if (!link) { - list_for_each_entry_safe(link, saved_link, tmp, - cgrp_link_list) { - list_del(&link->cgrp_link_list); - kfree(link); - } + free_cg_links(tmp); return -ENOMEM; } list_add(&link->cgrp_link_list, tmp); @@ -381,17 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp) return 0; } -static void free_cg_links(struct list_head *tmp) -{ - struct cg_cgroup_link *link; - struct cg_cgroup_link *saved_link; - - list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) { - list_del(&link->cgrp_link_list); - kfree(link); - } -} - /* * find_css_set() takes an existing cgroup group and a * cgroup object, and returns a css_set object that's @@ -956,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type, struct super_block *sb; struct cgroupfs_root *root; struct list_head tmp_cg_links; - INIT_LIST_HEAD(&tmp_cg_links); /* First find the desired set of subsystems */ ret = parse_cgroupfs_options(data, &opts); @@ -1424,14 +1418,17 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft, if (buffer == NULL) return -ENOMEM; } - if (nbytes && copy_from_user(buffer, userbuf, nbytes)) - return -EFAULT; + if (nbytes && copy_from_user(buffer, userbuf, nbytes)) { + retval = -EFAULT; + goto out; + } buffer[nbytes] = 0; /* nul-terminate */ strstrip(buffer); retval = cft->write_string(cgrp, cft, buffer); if (!retval) retval = nbytes; +out: if (buffer != local_buffer) kfree(buffer); return retval; @@ -2371,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode) return cgroup_create(c_parent, dentry, mode | S_IFDIR); } -static inline int cgroup_has_css_refs(struct cgroup *cgrp) +static int cgroup_has_css_refs(struct cgroup *cgrp) { /* Check the reference count on each subsystem. Since we * already established that there are no tasks in the diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 91cf85b36dd5..d5ab79cf516d 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -54,7 +54,6 @@ #include <asm/uaccess.h> #include <asm/atomic.h> #include <linux/mutex.h> -#include <linux/kfifo.h> #include <linux/workqueue.h> #include <linux/cgroup.h> @@ -486,13 +485,38 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b) static void update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c) { - if (!dattr) - return; if (dattr->relax_domain_level < c->relax_domain_level) dattr->relax_domain_level = c->relax_domain_level; return; } +static void +update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) +{ + LIST_HEAD(q); + + list_add(&c->stack_list, &q); + while (!list_empty(&q)) { + struct cpuset *cp; + struct cgroup *cont; + struct cpuset *child; + + cp = list_first_entry(&q, struct cpuset, stack_list); + list_del(q.next); + + if (cpus_empty(cp->cpus_allowed)) + continue; + + if (is_sched_load_balance(cp)) + update_domain_attr(dattr, cp); + + list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { + child = cgroup_cs(cont); + list_add_tail(&child->stack_list, &q); + } + } +} + /* * rebuild_sched_domains() * @@ -532,7 +556,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c) * So the reverse nesting would risk an ABBA deadlock. * * The three key local variables below are: - * q - a kfifo queue of cpuset pointers, used to implement a + * q - a linked-list queue of cpuset pointers, used to implement a * top-down scan of all cpusets. This scan loads a pointer * to each cpuset marked is_sched_load_balance into the * array 'csa'. For our purposes, rebuilding the schedulers @@ -567,7 +591,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c) void rebuild_sched_domains(void) { - struct kfifo *q; /* queue of cpusets to be scanned */ + LIST_HEAD(q); /* queue of cpusets to be scanned*/ struct cpuset *cp; /* scans q */ struct cpuset **csa; /* array of all cpuset ptrs */ int csn; /* how many cpuset ptrs in csa so far */ @@ -577,7 +601,6 @@ void rebuild_sched_domains(void) int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - q = NULL; csa = NULL; doms = NULL; dattr = NULL; @@ -591,35 +614,42 @@ void rebuild_sched_domains(void) dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL); if (dattr) { *dattr = SD_ATTR_INIT; - update_domain_attr(dattr, &top_cpuset); + update_domain_attr_tree(dattr, &top_cpuset); } *doms = top_cpuset.cpus_allowed; goto rebuild; } - q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL); - if (IS_ERR(q)) - goto done; csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL); if (!csa) goto done; csn = 0; - cp = &top_cpuset; - __kfifo_put(q, (void *)&cp, sizeof(cp)); - while (__kfifo_get(q, (void *)&cp, sizeof(cp))) { + list_add(&top_cpuset.stack_list, &q); + while (!list_empty(&q)) { struct cgroup *cont; struct cpuset *child; /* scans child cpusets of cp */ + cp = list_first_entry(&q, struct cpuset, stack_list); + list_del(q.next); + if (cpus_empty(cp->cpus_allowed)) continue; - if (is_sched_load_balance(cp)) + /* + * All child cpusets contain a subset of the parent's cpus, so + * just skip them, and then we call update_domain_attr_tree() + * to calc relax_domain_level of the corresponding sched + * domain. + */ + if (is_sched_load_balance(cp)) { csa[csn++] = cp; + continue; + } list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { child = cgroup_cs(cont); - __kfifo_put(q, (void *)&child, sizeof(cp)); + list_add_tail(&child->stack_list, &q); } } @@ -686,7 +716,7 @@ restart: cpus_or(*dp, *dp, b->cpus_allowed); b->pn = -1; if (dattr) - update_domain_attr(dattr + update_domain_attr_tree(dattr + nslot, b); } } @@ -702,8 +732,6 @@ rebuild: put_online_cpus(); done: - if (q && !IS_ERR(q)) - kfifo_free(q); kfree(csa); /* Don't kfree(doms) -- partition_sched_domains() does that. */ /* Don't kfree(dattr) -- partition_sched_domains() does that. */ @@ -1833,24 +1861,21 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs) */ static void scan_for_empty_cpusets(const struct cpuset *root) { + LIST_HEAD(queue); struct cpuset *cp; /* scans cpusets being updated */ struct cpuset *child; /* scans child cpusets of cp */ - struct list_head queue; struct cgroup *cont; nodemask_t oldmems; - INIT_LIST_HEAD(&queue); - list_add_tail((struct list_head *)&root->stack_list, &queue); while (!list_empty(&queue)) { - cp = container_of(queue.next, struct cpuset, stack_list); + cp = list_first_entry(&queue, struct cpuset, stack_list); list_del(queue.next); list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { child = cgroup_cs(cont); list_add_tail(&child->stack_list, &queue); } - cont = cp->css.cgroup; /* Continue past cpusets with all cpus, mems online */ if (cpus_subset(cp->cpus_allowed, cpu_online_map) && diff --git a/kernel/marker.c b/kernel/marker.c index 971da5317903..7d1faecd7a51 100644 --- a/kernel/marker.c +++ b/kernel/marker.c @@ -126,6 +126,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...) struct marker_probe_closure *multi; int i; /* + * Read mdata->ptype before mdata->multi. + */ + smp_rmb(); + multi = mdata->multi; + /* * multi points to an array, therefore accessing the array * depends on reading multi. However, even in this case, * we must insure that the pointer is read _before_ the array @@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...) * in the fast path, so put the explicit barrier here. */ smp_read_barrier_depends(); - multi = mdata->multi; for (i = 0; multi[i].func; i++) { va_start(args, call_private); multi[i].func(multi[i].probe_private, call_private, @@ -175,6 +179,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...) struct marker_probe_closure *multi; int i; /* + * Read mdata->ptype before mdata->multi. + */ + smp_rmb(); + multi = mdata->multi; + /* * multi points to an array, therefore accessing the array * depends on reading multi. However, even in this case, * we must insure that the pointer is read _before_ the array @@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...) * in the fast path, so put the explicit barrier here. */ smp_read_barrier_depends(); - multi = mdata->multi; for (i = 0; multi[i].func; i++) multi[i].func(multi[i].probe_private, call_private, mdata->format, &args); diff --git a/kernel/printk.c b/kernel/printk.c index a7f7559c5f6c..b51b1567bb55 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1309,14 +1309,14 @@ void tty_write_message(struct tty_struct *tty, char *msg) #if defined CONFIG_PRINTK -DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); /* * printk rate limiting, lifted from the networking subsystem. * - * This enforces a rate limit: not more than one kernel message - * every printk_ratelimit_jiffies to make a denial-of-service - * attack impossible. + * This enforces a rate limit: not more than 10 kernel messages + * every 5s to make a denial-of-service attack impossible. */ +DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); + int printk_ratelimit(void) { return __ratelimit(&printk_ratelimit_state); diff --git a/kernel/resource.c b/kernel/resource.c index 74af2d7cb5a1..f5b518eabefe 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -490,7 +490,7 @@ resource_size_t resource_alignment(struct resource *res) { switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) { case IORESOURCE_SIZEALIGN: - return res->end - res->start + 1; + return resource_size(res); case IORESOURCE_STARTALIGN: return res->start; default: diff --git a/kernel/sched.c b/kernel/sched.c index 0236958addcb..21f7da94662e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7671,34 +7671,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt) } #ifdef CONFIG_SCHED_MC -static ssize_t sched_mc_power_savings_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t sched_mc_power_savings_show(struct sysdev_class *class, + char *page) { return sprintf(page, "%u\n", sched_mc_power_savings); } -static ssize_t sched_mc_power_savings_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t sched_mc_power_savings_store(struct sysdev_class *class, const char *buf, size_t count) { return sched_power_savings_store(buf, count, 0); } -static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show, - sched_mc_power_savings_store); +static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644, + sched_mc_power_savings_show, + sched_mc_power_savings_store); #endif #ifdef CONFIG_SCHED_SMT -static ssize_t sched_smt_power_savings_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev, + char *page) { return sprintf(page, "%u\n", sched_smt_power_savings); } -static ssize_t sched_smt_power_savings_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev, const char *buf, size_t count) { return sched_power_savings_store(buf, count, 1); } -static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show, +static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644, + sched_smt_power_savings_show, sched_smt_power_savings_store); #endif diff --git a/kernel/workqueue.c b/kernel/workqueue.c index ec7e4f62aaff..4a26a1382df0 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -830,10 +830,21 @@ struct workqueue_struct *__create_workqueue_key(const char *name, start_workqueue_thread(cwq, -1); } else { cpu_maps_update_begin(); + /* + * We must place this wq on list even if the code below fails. + * cpu_down(cpu) can remove cpu from cpu_populated_map before + * destroy_workqueue() takes the lock, in that case we leak + * cwq[cpu]->thread. + */ spin_lock(&workqueue_lock); list_add(&wq->list, &workqueues); spin_unlock(&workqueue_lock); - + /* + * We must initialize cwqs for each possible cpu even if we + * are going to call destroy_workqueue() finally. Otherwise + * cpu_up() can hit the uninitialized cwq once we drop the + * lock. + */ for_each_possible_cpu(cpu) { cwq = init_cpu_workqueue(wq, cpu); if (err || !cpu_online(cpu)) diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c index 889ddce2021e..a3b8d4c3f77a 100644 --- a/lib/iommu-helper.c +++ b/lib/iommu-helper.c @@ -80,11 +80,3 @@ void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr) } } EXPORT_SYMBOL(iommu_area_free); - -unsigned long iommu_num_pages(unsigned long addr, unsigned long len) -{ - unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE); - - return size >> PAGE_SHIFT; -} -EXPORT_SYMBOL(iommu_num_pages); diff --git a/lib/random32.c b/lib/random32.c index ca87d86992bd..217d5c4b666d 100644 --- a/lib/random32.c +++ b/lib/random32.c @@ -56,23 +56,12 @@ static u32 __random32(struct rnd_state *state) return (state->s1 ^ state->s2 ^ state->s3); } -static void __set_random32(struct rnd_state *state, unsigned long s) +/* + * Handle minimum values for seeds + */ +static inline u32 __seed(u32 x, u32 m) { - if (s == 0) - s = 1; /* default seed is 1 */ - -#define LCG(n) (69069 * n) - state->s1 = LCG(s); - state->s2 = LCG(state->s1); - state->s3 = LCG(state->s2); - - /* "warm it up" */ - __random32(state); - __random32(state); - __random32(state); - __random32(state); - __random32(state); - __random32(state); + return (x < m) ? x + m : x; } /** @@ -107,7 +96,7 @@ void srandom32(u32 entropy) */ for_each_possible_cpu (i) { struct rnd_state *state = &per_cpu(net_rand_state, i); - __set_random32(state, state->s1 ^ entropy); + state->s1 = __seed(state->s1 ^ entropy, 1); } } EXPORT_SYMBOL(srandom32); @@ -122,7 +111,19 @@ static int __init random32_init(void) for_each_possible_cpu(i) { struct rnd_state *state = &per_cpu(net_rand_state,i); - __set_random32(state, i + jiffies); + +#define LCG(x) ((x) * 69069) /* super-duper LCG */ + state->s1 = __seed(LCG(i + jiffies), 1); + state->s2 = __seed(LCG(state->s1), 7); + state->s3 = __seed(LCG(state->s2), 15); + + /* "warm it up" */ + __random32(state); + __random32(state); + __random32(state); + __random32(state); + __random32(state); + __random32(state); } return 0; } @@ -135,13 +136,18 @@ core_initcall(random32_init); static int __init random32_reseed(void) { int i; - unsigned long seed; for_each_possible_cpu(i) { struct rnd_state *state = &per_cpu(net_rand_state,i); + u32 seeds[3]; + + get_random_bytes(&seeds, sizeof(seeds)); + state->s1 = __seed(seeds[0], 1); + state->s2 = __seed(seeds[1], 7); + state->s3 = __seed(seeds[2], 15); - get_random_bytes(&seed, sizeof(seed)); - __set_random32(state, seed); + /* mix it in */ + __random32(state); } return 0; } diff --git a/mm/filemap.c b/mm/filemap.c index 42bbc6909ba4..d97d1ad55473 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1879,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes) * The !iov->iov_len check ensures we skip over unlikely * zero-length segments (without overruning the iovec). */ - while (bytes || unlikely(!iov->iov_len && i->count)) { + while (bytes || unlikely(i->count && !iov->iov_len)) { int copy; copy = min(bytes, iov->iov_len - base); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 254ce2b90158..d237a02eb228 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -17,7 +17,7 @@ #include <linux/mutex.h> #include <linux/bootmem.h> #include <linux/sysfs.h> - +#include <asm/io.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/io.h> diff --git a/mm/madvise.c b/mm/madvise.c index 23a0ec3e0ea0..f9349c18a1b5 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma, * Application no longer needs these pages. If the pages are dirty, * it's OK to just throw them away. The app will be more careful about * data it wants to keep. Be sure to free swap resources too. The - * zap_page_range call sets things up for refill_inactive to actually free + * zap_page_range call sets things up for shrink_active_list to actually free * these pages later if no one else has touched them in the meantime, * although we could add these pages to a global reuse list for - * refill_inactive to pick up before reclaiming other pages. + * shrink_active_list to pick up before reclaiming other pages. * * NB: This interface discards data rather than pushes it out to swap, * as some implementations do. This has performance implications for diff --git a/mm/memcontrol.c b/mm/memcontrol.c index fba566c51322..7056c3bdb478 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1168,9 +1168,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss, mem = mem_cgroup_from_cont(cont); old_mem = mem_cgroup_from_cont(old_cont); - if (mem == old_mem) - goto out; - /* * Only thread group leaders are allowed to migrate, the mm_struct is * in effect owned by the leader diff --git a/mm/memory.c b/mm/memory.c index 67f0ab9077d9..0e4eea10c7b0 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -993,6 +993,30 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, tlb_finish_mmu(tlb, address, end); return end; } +EXPORT_SYMBOL_GPL(zap_page_range); + +/** + * zap_vma_ptes - remove ptes mapping the vma + * @vma: vm_area_struct holding ptes to be zapped + * @address: starting address of pages to zap + * @size: number of bytes to zap + * + * This function only unmaps ptes assigned to VM_PFNMAP vmas. + * + * The entire address range must be fully contained within the vma. + * + * Returns 0 if successful. + */ +int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, + unsigned long size) +{ + if (address < vma->vm_start || address + size > vma->vm_end || + !(vma->vm_flags & VM_PFNMAP)) + return -1; + zap_page_range(vma, address, size, NULL); + return 0; +} +EXPORT_SYMBOL_GPL(zap_vma_ptes); /* * Do a quick page-table lookup for a single page. @@ -1087,6 +1111,7 @@ no_page_table: } return page; } +EXPORT_SYMBOL_GPL(follow_page); /* Can we do the FOLL_ANON optimization? */ static inline int use_zero_page(struct vm_area_struct *vma) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 3cf3d05b6bd4..401d104d2bb6 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3753,23 +3753,6 @@ unsigned long __init find_min_pfn_with_active_regions(void) return find_min_pfn_for_node(MAX_NUMNODES); } -/** - * find_max_pfn_with_active_regions - Find the maximum PFN registered - * - * It returns the maximum PFN based on information provided via - * add_active_range(). - */ -unsigned long __init find_max_pfn_with_active_regions(void) -{ - int i; - unsigned long max_pfn = 0; - - for (i = 0; i < nr_nodemap_entries; i++) - max_pfn = max(max_pfn, early_node_map[i].end_pfn); - - return max_pfn; -} - /* * early_calculate_totalpages() * Sum pages in active regions for movable zone. diff --git a/mm/rmap.c b/mm/rmap.c index 99bc3f9cd796..94a5246a3f98 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -667,7 +667,8 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma) * Leaving it set also helps swapoff to reinstate ptes * faster for those pages still in swapcache. */ - if (page_test_dirty(page)) { + if ((!PageAnon(page) || PageSwapCache(page)) && + page_test_dirty(page)) { page_clear_dirty(page); set_page_dirty(page); } diff --git a/mm/swap.c b/mm/swap.c index dd89234ee51f..7417a2adbe50 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -278,9 +278,10 @@ int lru_add_drain_all(void) * Avoid taking zone->lru_lock if possible, but if it is taken, retain it * for the remainder of the operation. * - * The locking in this function is against shrink_cache(): we recheck the - * page count inside the lock to see whether shrink_cache grabbed the page - * via the LRU. If it did, give up: shrink_cache will free it. + * The locking in this function is against shrink_inactive_list(): we recheck + * the page count inside the lock to see whether shrink_inactive_list() + * grabbed the page via the LRU. If it did, give up: shrink_inactive_list() + * will free it. */ void release_pages(struct page **pages, int nr, int cold) { diff --git a/mm/swapfile.c b/mm/swapfile.c index 6beb6251e99d..bb7f79641f9e 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm, if (!down_read_trylock(&mm->mmap_sem)) { /* - * Activate page so shrink_cache is unlikely to unmap its - * ptes while lock is dropped, so swapoff can make progress. + * Activate page so shrink_inactive_list is unlikely to unmap + * its ptes while lock is dropped, so swapoff can make progress. */ activate_page(page); unlock_page(page); diff --git a/mm/vmscan.c b/mm/vmscan.c index 8f71761bc4b7..75be453628bf 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1408,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, if (sc->nr_scanned && priority < DEF_PRIORITY - 2) congestion_wait(WRITE, HZ/10); } - /* top priority shrink_caches still had more to do? don't OOM, then */ + /* top priority shrink_zones still had more to do? don't OOM, then */ if (!sc->all_unreclaimable && scan_global_lru(sc)) ret = nr_reclaimed; out: @@ -1979,7 +1979,7 @@ module_init(kswapd_init) int zone_reclaim_mode __read_mostly; #define RECLAIM_OFF 0 -#define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */ +#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */ #define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */ #define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */ diff --git a/net/Kconfig b/net/Kconfig index b98668751749..7612cc8c337c 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -2,9 +2,7 @@ # Network configuration # -menu "Networking" - -config NET +menuconfig NET bool "Networking support" ---help--- Unless you really know what you are doing, you should say Y here. @@ -22,7 +20,6 @@ config NET recommended to read the NET-HOWTO, available from <http://www.tldp.org/docs.html#howto>. -# Make sure that all config symbols are dependent on NET if NET menu "Networking options" @@ -252,5 +249,3 @@ source "net/rfkill/Kconfig" source "net/9p/Kconfig" endif # if NET -endmenu # Networking - diff --git a/net/atm/mpc.c b/net/atm/mpc.c index 4fccaa1e07be..11b16d16661c 100644 --- a/net/atm/mpc.c +++ b/net/atm/mpc.c @@ -62,11 +62,13 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg, struct mpoa_client *mpc static void set_mpc_ctrl_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc); static void set_mps_mac_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc); -static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac, - uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type); +static const uint8_t *copy_macs(struct mpoa_client *mpc, + const uint8_t *router_mac, + const uint8_t *tlvs, uint8_t mps_macs, + uint8_t device_type); static void purge_egress_shortcut(struct atm_vcc *vcc, eg_cache_entry *entry); -static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc); +static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc); static void mpoad_close(struct atm_vcc *vcc); static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb); @@ -351,12 +353,12 @@ static const char *mpoa_device_type_string(char type) * lec sees a TLV it uses the pointer to call this function. * */ -static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr, - uint8_t *tlvs, uint32_t sizeoftlvs) +static void lane2_assoc_ind(struct net_device *dev, const u8 *mac_addr, + const u8 *tlvs, u32 sizeoftlvs) { uint32_t type; uint8_t length, mpoa_device_type, number_of_mps_macs; - uint8_t *end_of_tlvs; + const uint8_t *end_of_tlvs; struct mpoa_client *mpc; mpoa_device_type = number_of_mps_macs = 0; /* silence gcc */ @@ -430,8 +432,10 @@ static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr, * plus the possible MAC address(es) to mpc->mps_macs. * For a freshly allocated MPOA client mpc->mps_macs == 0. */ -static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac, - uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type) +static const uint8_t *copy_macs(struct mpoa_client *mpc, + const uint8_t *router_mac, + const uint8_t *tlvs, uint8_t mps_macs, + uint8_t device_type) { int num_macs; num_macs = (mps_macs > 1) ? mps_macs : 1; @@ -811,7 +815,7 @@ static int atm_mpoa_mpoad_attach (struct atm_vcc *vcc, int arg) return arg; } -static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc) +static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc) { struct k_message mesg; diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index d9449df7cad5..9b58d70b0e7d 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -68,10 +68,17 @@ static int br_dev_stop(struct net_device *dev) static int br_change_mtu(struct net_device *dev, int new_mtu) { - if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev))) + struct net_bridge *br = netdev_priv(dev); + if (new_mtu < 68 || new_mtu > br_min_mtu(br)) return -EINVAL; dev->mtu = new_mtu; + +#ifdef CONFIG_BRIDGE_NETFILTER + /* remember the MTU in the rtable for PMTU */ + br->fake_rtable.u.dst.metrics[RTAX_MTU - 1] = new_mtu; +#endif + return 0; } diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index a072ea5ca6f5..63c18aacde8c 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -202,6 +202,9 @@ static struct net_device *new_bridge_dev(const char *name) br->topology_change = 0; br->topology_change_detected = 0; br->ageing_time = 300 * HZ; + + br_netfilter_rtable_init(br); + INIT_LIST_HEAD(&br->age_list); br_stp_timer_init(br); diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index bb90cd7bace3..6e280a8a31ee 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -101,33 +101,30 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb) pppoe_proto(skb) == htons(PPP_IPV6) && \ brnf_filter_pppoe_tagged) -/* We need these fake structures to make netfilter happy -- - * lots of places assume that skb->dst != NULL, which isn't - * all that unreasonable. - * +/* + * Initialize bogus route table used to keep netfilter happy. * Currently, we fill in the PMTU entry because netfilter * refragmentation needs it, and the rt_flags entry because * ipt_REJECT needs it. Future netfilter modules might - * require us to fill additional fields. */ -static struct net_device __fake_net_device = { - .hard_header_len = ETH_HLEN, -#ifdef CONFIG_NET_NS - .nd_net = &init_net, -#endif -}; + * require us to fill additional fields. + */ +void br_netfilter_rtable_init(struct net_bridge *br) +{ + struct rtable *rt = &br->fake_rtable; -static struct rtable __fake_rtable = { - .u = { - .dst = { - .__refcnt = ATOMIC_INIT(1), - .dev = &__fake_net_device, - .path = &__fake_rtable.u.dst, - .metrics = {[RTAX_MTU - 1] = 1500}, - .flags = DST_NOXFRM, - } - }, - .rt_flags = 0, -}; + atomic_set(&rt->u.dst.__refcnt, 1); + rt->u.dst.dev = &br->dev; + rt->u.dst.path = &rt->u.dst; + rt->u.dst.metrics[RTAX_MTU - 1] = 1500; + rt->u.dst.flags = DST_NOXFRM; +} + +static inline struct rtable *bridge_parent_rtable(const struct net_device *dev) +{ + struct net_bridge_port *port = rcu_dereference(dev->br_port); + + return port ? &port->br->fake_rtable : NULL; +} static inline struct net_device *bridge_parent(const struct net_device *dev) { @@ -226,8 +223,12 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb) } nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING; - skb->rtable = &__fake_rtable; - dst_hold(&__fake_rtable.u.dst); + skb->rtable = bridge_parent_rtable(nf_bridge->physindev); + if (!skb->rtable) { + kfree_skb(skb); + return 0; + } + dst_hold(&skb->rtable->u.dst); skb->dev = nf_bridge->physindev; nf_bridge_push_encap_header(skb); @@ -391,8 +392,12 @@ bridged_dnat: skb->pkt_type = PACKET_HOST; } } else { - skb->rtable = &__fake_rtable; - dst_hold(&__fake_rtable.u.dst); + skb->rtable = bridge_parent_rtable(nf_bridge->physindev); + if (!skb->rtable) { + kfree_skb(skb); + return 0; + } + dst_hold(&skb->rtable->u.dst); } skb->dev = nf_bridge->physindev; @@ -611,8 +616,8 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb, const struct net_device *out, int (*okfn)(struct sk_buff *)) { - if (skb->rtable == &__fake_rtable) { - dst_release(&__fake_rtable.u.dst); + if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) { + dst_release(&skb->rtable->u.dst); skb->rtable = NULL; } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 815ed38925b2..c3dc18ddc043 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -15,6 +15,7 @@ #include <linux/netdevice.h> #include <linux/if_bridge.h> +#include <net/route.h> #define BR_HASH_BITS 8 #define BR_HASH_SIZE (1 << BR_HASH_BITS) @@ -92,6 +93,9 @@ struct net_bridge struct hlist_head hash[BR_HASH_SIZE]; struct list_head age_list; unsigned long feature_mask; +#ifdef CONFIG_BRIDGE_NETFILTER + struct rtable fake_rtable; +#endif unsigned long flags; #define BR_SET_MAC_ADDR 0x00000001 @@ -197,9 +201,11 @@ extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __us #ifdef CONFIG_BRIDGE_NETFILTER extern int br_netfilter_init(void); extern void br_netfilter_fini(void); +extern void br_netfilter_rtable_init(struct net_bridge *); #else #define br_netfilter_init() (0) #define br_netfilter_fini() do { } while(0) +#define br_netfilter_rtable_init(x) #endif /* br_stp.c */ diff --git a/net/core/dev.c b/net/core/dev.c index 8d13a9b9f1df..69320a56a084 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2100,7 +2100,7 @@ static int ing_filter(struct sk_buff *skb) rxq = &dev->rx_queue; q = rxq->qdisc; - if (q) { + if (q != &noop_qdisc) { spin_lock(qdisc_lock(q)); result = qdisc_enqueue_root(skb, q); spin_unlock(qdisc_lock(q)); @@ -2113,7 +2113,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb, struct packet_type **pt_prev, int *ret, struct net_device *orig_dev) { - if (!skb->dev->rx_queue.qdisc) + if (skb->dev->rx_queue.qdisc == &noop_qdisc) goto out; if (*pt_prev) { @@ -4200,6 +4200,7 @@ static void netdev_init_queues(struct net_device *dev) { netdev_init_one_queue(dev, &dev->rx_queue, NULL); netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL); + spin_lock_init(&dev->tx_global_lock); } /** diff --git a/net/core/netpoll.c b/net/core/netpoll.c index c12720895ecf..6c7af390be0a 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -70,6 +70,7 @@ static void queue_process(struct work_struct *work) local_irq_save(flags); __netif_tx_lock(txq, smp_processor_id()); if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq) || dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) { skb_queue_head(&npinfo->txq, skb); __netif_tx_unlock(txq); diff --git a/net/core/pktgen.c b/net/core/pktgen.c index c7d484f7e1c4..3284605f2ec7 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3305,6 +3305,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) txq = netdev_get_tx_queue(odev, queue_map); if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq) || need_resched()) { idle_start = getCurUs(); @@ -3320,7 +3321,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->idle_acc += getCurUs() - idle_start; - if (netif_tx_queue_stopped(txq)) { + if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq)) { pkt_dev->next_tx_us = getCurUs(); /* TODO */ pkt_dev->next_tx_ns = 0; goto out; /* Try the next interface */ @@ -3352,7 +3354,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) txq = netdev_get_tx_queue(odev, queue_map); __netif_tx_lock_bh(txq); - if (!netif_tx_queue_stopped(txq)) { + if (!netif_tx_queue_stopped(txq) && + !netif_tx_queue_frozen(txq)) { atomic_inc(&(pkt_dev->skb->users)); retry_now: diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4e0c92274189..84640172d65d 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) C(head); C(data); C(truesize); +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + C(do_not_encrypt); +#endif atomic_set(&n->users, 1); atomic_inc(&(skb_shinfo(skb)->dataref)); diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index 1819ad7ab910..fafe8ebb4c55 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -475,11 +475,10 @@ static void arp_print(struct arp_payload *payload) #define HBUFFERLEN 30 char hbuffer[HBUFFERLEN]; int j,k; - const char hexbuf[]= "0123456789abcdef"; for (k=0, j=0; k < HBUFFERLEN-3 && j < ETH_ALEN; j++) { - hbuffer[k++]=hexbuf[(payload->src_hw[j]>>4)&15]; - hbuffer[k++]=hexbuf[payload->src_hw[j]&15]; + hbuffer[k++] = hex_asc_hi(payload->src_hw[j]); + hbuffer[k++] = hex_asc_lo(payload->src_hw[j]); hbuffer[k++]=':'; } hbuffer[--k]='\0'; diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c index 21cb053f5d7d..3974d7cae5c0 100644 --- a/net/ipv4/netfilter/ipt_recent.c +++ b/net/ipv4/netfilter/ipt_recent.c @@ -305,10 +305,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo) spin_lock_bh(&recent_lock); list_del(&t->list); spin_unlock_bh(&recent_lock); - recent_table_flush(t); #ifdef CONFIG_PROC_FS remove_proc_entry(t->name, proc_dir); #endif + recent_table_flush(t); kfree(t); } mutex_unlock(&recent_mutex); diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 834356ea99df..8f5a403f6f6b 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD), SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO), SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS), + SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND), + SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED), SNMP_MIB_SENTINEL }; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 380d6474cf66..1bfa078ddbd0 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3216,14 +3216,18 @@ int __init ip_rt_init(void) return rc; } +#ifdef CONFIG_SYSCTL /* * We really need to sanitize the damn ipv4 init order, then all * this nonsense will go away. */ void __init ip_static_sysctl_init(void) { +#ifdef CONFIG_SYSCTL register_sysctl_paths(ipv4_route_path, ipv4_route_table); +#endif } +#endif EXPORT_SYMBOL(__ip_select_ident); EXPORT_SYMBOL(ip_route_input); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a2b06d0cc26b..91a8cfddf1c4 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -655,8 +655,8 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, rep.th.doff = arg.iov[0].iov_len/4; tcp_v4_md5_hash_hdr((__u8 *) &rep.opt[offset], - key, ip_hdr(skb)->daddr, - ip_hdr(skb)->saddr, &rep.th); + key, ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, &rep.th); } #endif arg.csum = csum_tcpudp_nofold(ip_hdr(skb)->daddr, @@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb) return 0; if (hash_expected && !hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } if (!hash_expected && hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index f7b535dec860..410046a8cc91 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net, LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n", cmsg->cmsg_type); err = -EINVAL; - break; + goto exit_f; } } diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 6811901e6b1e..a027003d69a4 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -236,6 +236,10 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, skb_reset_network_header(skb); hdr = ipv6_hdr(skb); + /* Allow local fragmentation. */ + if (ipfragok) + skb->local_df = 1; + /* * Fill in the IPv6 header */ diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f82f6074cf85..0179b66864f1 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -286,7 +286,6 @@ proc_net_fail: void ipv6_misc_proc_exit(void) { - proc_net_remove(&init_net, "sockstat6"); proc_net_remove(&init_net, "dev_snmp6"); proc_net_remove(&init_net, "snmp6"); unregister_pernet_subsys(&ipv6_proc_ops); diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index cff778b23a7f..78185a409212 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -748,7 +748,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp, ipv6_addr_copy(&bp->saddr, saddr); ipv6_addr_copy(&bp->daddr, daddr); bp->protocol = cpu_to_be32(IPPROTO_TCP); - bp->len = cpu_to_be16(nbytes); + bp->len = cpu_to_be32(nbytes); sg_init_one(&sg, bp, sizeof(*bp)); return crypto_hash_update(&hp->md5_desc, &sg, sizeof(*bp)); @@ -849,28 +849,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb) hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr); hash_location = tcp_parse_md5sig_option(th); - /* do we have a hash as expected? */ - if (!hash_expected) { - if (!hash_location) - return 0; - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + /* We've parsed the options - do we have a hash? */ + if (!hash_expected && !hash_location) + return 0; + + if (hash_expected && !hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } - if (!hash_location) { - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + if (!hash_expected && hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } @@ -1105,8 +1094,8 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); tcp_v6_md5_hash_hdr((__u8 *)topt, key, - &ipv6_hdr(skb)->daddr, - &ipv6_hdr(skb)->saddr, t1); + &ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, t1); } #endif diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8e7ba0e62cf5..297c257864c7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct net_device *dev; enum ieee80211_if_types itype; struct ieee80211_sub_if_data *sdata; @@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, if (itype == IEEE80211_IF_TYPE_INVALID) return -EINVAL; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); ret = ieee80211_if_change_type(sdata, itype); @@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr, struct key_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; enum ieee80211_key_alg alg; struct ieee80211_key *key; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); switch (params->cipher) { @@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta; int ret; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); @@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, void (*callback)(void *cookie, struct key_params *params)) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; u8 seq[6] = {0}; struct key_params params; @@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, u16 iv16; int err = -ENOENT; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + rcu_read_lock(); if (mac_addr) { @@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; + if (dev == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local, static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *sdata; int err; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + /* Prevent a race with changing the rate control algorithm */ if (!netif_running(dev)) return -ENETDOWN; @@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - struct ieee80211_local *local = sdata->local; + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (mac) { rcu_read_lock(); @@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *vlansdata; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); /* XXX: get sta belonging to dev */ @@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -EINVAL; } - sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); + sta->sdata = vlansdata; ieee80211_send_layer2_update(sta); } @@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy, static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index f1a83d450ea0..a4c5b90de769 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data) /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to * make a prepared TX frame (one that has been given to hw) to look like brand * new IEEE 802.11 frame that is ready to go through TX processing again. - * Also, tx_packet_data in cb is restored from tx_control. */ + */ static void ieee80211_remove_tx_extra(struct ieee80211_local *local, struct ieee80211_key *key, struct sk_buff *skb) { int hdrlen, iv_len, mic_len; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_CTL_DO_NOT_ENCRYPT | - IEEE80211_TX_CTL_REQUEUE | - IEEE80211_TX_CTL_EAPOL_FRAME; hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -1731,8 +1725,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) result = ieee80211_wep_init(local); if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep\n", - wiphy_name(local->hw.wiphy)); + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); goto fail_wep; } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d7c371e36bf0..acb04133a95d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, int encrypt) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_tx_info *info; sdata = IEEE80211_DEV_TO_SUB_IF(dev); skb->dev = sdata->local->mdev; @@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, skb_set_network_header(skb, 0); skb_set_transport_header(skb, 0); - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(struct ieee80211_tx_info)); - info->control.ifindex = sdata->dev->ifindex; - if (!encrypt) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->iif = sdata->dev->ifindex; + skb->do_not_encrypt = !encrypt; dev_queue_xmit(skb); } @@ -3303,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev) ifsta = &sdata->u.sta; ifsta->state = IEEE80211_MESH_UP; ieee80211_sta_timer((unsigned long)sdata); + ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); } #endif diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0fbadd8b983c..69019e943873 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) rcu_read_unlock(); local->total_ps_buffered = total; -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", wiphy_name(local->hw.wiphy), purged); #endif @@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= AP_MAX_BC_BUFFER) { -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: BC TX buffer full - " "dropping the oldest frame\n", @@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: STA %s TX " "buffer full - dropping oldest frame\n", @@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); u16 fc = tx->fc; - if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (unlikely(tx->skb->do_not_encrypt)) tx->key = NULL; else if (tx->sta && (key = rcu_dereference(tx->sta->key))) tx->key = key; else if ((key = rcu_dereference(tx->sdata->default_key))) tx->key = key; else if (tx->sdata->drop_unencrypted && - !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) && + (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) && !(info->flags & IEEE80211_TX_CTL_INJECTED)) { I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); return TX_DROP; @@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) } if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 1; return TX_CONTINUE; } @@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) memcpy(skb_put(frag, copylen), pos, copylen); memcpy(frag->cb, first->cb, sizeof(frag->cb)); skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; left -= copylen; @@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, sband = tx->local->hw.wiphy->bands[tx->channel->band]; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->do_not_encrypt = 1; info->flags |= IEEE80211_TX_CTL_INJECTED; tx->flags &= ~IEEE80211_TX_FRAGMENTED; @@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, skb_trim(skb, skb->len - FCS_LEN); } if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) - info->flags &= - ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 0; if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) tx->flags |= IEEE80211_TX_FRAGMENTED; break; @@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx, struct sk_buff *skb, struct net_device *mdev) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct net_device *dev; - dev = dev_get_by_index(&init_net, info->control.ifindex); + dev = dev_get_by_index(&init_net, skb->iif); if (unlikely(dev && !is_ieee80211_device(dev, mdev))) { dev_put(dev); dev = NULL; @@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, bool may_encrypt; int ret; - if (info->control.ifindex) - odev = dev_get_by_index(&init_net, info->control.ifindex); + if (skb->iif) + odev = dev_get_by_index(&init_net, skb->iif); if (unlikely(odev && !is_ieee80211_device(odev, dev))) { dev_put(odev); odev = NULL; @@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, return 0; } + memset(info, 0, sizeof(*info)); + + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + osdata = IEEE80211_DEV_TO_SUB_IF(odev); - may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT); + may_encrypt = !skb->do_not_encrypt; headroom = osdata->local->tx_headroom; if (may_encrypt) @@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_radiotap_header *prthdr = (struct ieee80211_radiotap_header *)skb->data; u16 len_rthdr; @@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, skb->dev = local->mdev; /* needed because we set skb device to master */ - info->control.ifindex = dev->ifindex; + skb->iif = dev->ifindex; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + /* sometimes we do encrypt injected frames, will be fixed + * up in radiotap parser if not wanted */ + skb->do_not_encrypt = 0; /* * fix up the pointers accounting for the radiotap @@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info; struct ieee80211_sub_if_data *sdata; int ret = 1, head_need; u16 ethertype, hdrlen, meshhdrlen = 0; @@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, nh_pos += hdrlen; h_pos += hdrlen; - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(*info)); - info->control.ifindex = dev->ifindex; - if (ethertype == ETH_P_PAE) - info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME; - - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + skb->iif = dev->ifindex; skb->dev = local->mdev; dev->stats.tx_packets++; @@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info = IEEE80211_SKB_CB(skb); + skb->do_not_encrypt = 1; + info->band = band; rate_control_get_rate(local->mdev, sband, skb, &rsel); @@ -1931,7 +1927,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, "no rate found\n", wiphy_name(local->hw.wiphy)); } - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); skb = NULL; goto out; } @@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; if (sdata->bss_conf.use_short_preamble && diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index 872d2fcd1a5b..5c2bf0a3d4db 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local) local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_tx_tfm)) - return -ENOMEM; + return PTR_ERR(local->wep_tx_tfm); local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_rx_tfm)) { crypto_free_blkcipher(local->wep_tx_tfm); - return -ENOMEM; + return PTR_ERR(local->wep_rx_tfm); } return 0; diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 07edda0b8a5c..28437f0001db 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, { int i; + /* XXX: currently broken due to cb/requeue use */ + return -EPERM; + /* prepare the filter and save it for the SW queue * matching the received HW queue */ diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 420a10d8eb1e..6f61261888ef 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -67,7 +67,8 @@ static const char *const tcp_conntrack_names[] = { /* RFC1122 says the R2 limit should be at least 100 seconds. Linux uses 15 packets as limit, which corresponds to ~13-30min depending on RTO. */ -static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly = 5 MINS; +static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly = 5 MINS; +static unsigned int nf_ct_tcp_timeout_unacknowledged __read_mostly = 5 MINS; static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = { [TCP_CONNTRACK_SYN_SENT] = 2 MINS, @@ -625,8 +626,10 @@ static bool tcp_in_window(const struct nf_conn *ct, swin = win + (sack - ack); if (sender->td_maxwin < swin) sender->td_maxwin = swin; - if (after(end, sender->td_end)) + if (after(end, sender->td_end)) { sender->td_end = end; + sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; + } /* * Update receiver data. */ @@ -637,6 +640,8 @@ static bool tcp_in_window(const struct nf_conn *ct, if (win == 0) receiver->td_maxend++; } + if (ack == receiver->td_end) + receiver->flags &= ~IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; /* * Check retransmissions. @@ -951,9 +956,16 @@ static int tcp_packet(struct nf_conn *ct, if (old_state != new_state && new_state == TCP_CONNTRACK_FIN_WAIT) ct->proto.tcp.seen[dir].flags |= IP_CT_TCP_FLAG_CLOSE_INIT; - timeout = ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans - && tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans - ? nf_ct_tcp_timeout_max_retrans : tcp_timeouts[new_state]; + + if (ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans && + tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans) + timeout = nf_ct_tcp_timeout_max_retrans; + else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) & + IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED && + tcp_timeouts[new_state] > nf_ct_tcp_timeout_unacknowledged) + timeout = nf_ct_tcp_timeout_unacknowledged; + else + timeout = tcp_timeouts[new_state]; write_unlock_bh(&tcp_lock); nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, skb); @@ -1236,6 +1248,13 @@ static struct ctl_table tcp_sysctl_table[] = { .proc_handler = &proc_dointvec_jiffies, }, { + .procname = "nf_conntrack_tcp_timeout_unacknowledged", + .data = &nf_ct_tcp_timeout_unacknowledged, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec_jiffies, + }, + { .ctl_name = NET_NF_CONNTRACK_TCP_LOOSE, .procname = "nf_conntrack_tcp_loose", .data = &nf_ct_tcp_loose, diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 6809af542a2c..d9418a267812 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -367,9 +367,7 @@ static void htable_gc(unsigned long htlong) static void htable_destroy(struct xt_hashlimit_htable *hinfo) { - /* remove timer, if it is pending */ - if (timer_pending(&hinfo->timer)) - del_timer(&hinfo->timer); + del_timer_sync(&hinfo->timer); /* remove proc entry */ remove_proc_entry(hinfo->pde->name, diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 7a560b785097..c6f2f388cb72 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill) /** * rfkill_toggle_radio - wrapper for toggle_radio hook - * * @rfkill: the rfkill struct to use * @force: calls toggle_radio even if cache says it is not needed, * and also makes sure notifications of the state will be @@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill) * calls and handling all the red tape such as issuing notifications * if the call is successful. * - * Note that @force cannot override a (possibly cached) state of - * RFKILL_STATE_HARD_BLOCKED. Any device making use of + * Note that the @force parameter cannot override a (possibly cached) + * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of * RFKILL_STATE_HARD_BLOCKED implements either get_state() or * rfkill_force_state(), so the cache either is bypassed or valid. * @@ -150,7 +149,7 @@ static void update_rfkill_state(struct rfkill *rfkill) * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to * give the driver a hint that it should double-BLOCK the transmitter. * - * Caller must have aquired rfkill_mutex. + * Caller must have acquired rfkill->mutex. */ static int rfkill_toggle_radio(struct rfkill *rfkill, enum rfkill_state state, @@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill, /** * rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affeceted + * @type: type of interfaces to be affected * @state: the new state * - * This function toggles state of all switches of given type unless - * a specific switch is claimed by userspace in which case it is - * left alone. + * This function toggles the state of all switches of given type, + * unless a specific switch is claimed by userspace (in which case, + * that switch is left alone). */ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) { @@ -216,8 +215,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) rfkill_states[type] = state; list_for_each_entry(rfkill, &rfkill_list, node) { - if ((!rfkill->user_claim) && (rfkill->type == type)) + if ((!rfkill->user_claim) && (rfkill->type == type)) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, state, 0); + mutex_unlock(&rfkill->mutex); + } } mutex_unlock(&rfkill_mutex); @@ -228,7 +230,7 @@ EXPORT_SYMBOL(rfkill_switch_all); * rfkill_epo - emergency power off all transmitters * * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring - * everything in its path but rfkill_mutex. + * everything in its path but rfkill_mutex and rfkill->mutex. */ void rfkill_epo(void) { @@ -236,7 +238,9 @@ void rfkill_epo(void) mutex_lock(&rfkill_mutex); list_for_each_entry(rfkill, &rfkill_list, node) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } mutex_unlock(&rfkill_mutex); } @@ -252,7 +256,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo); * a notification by the firmware/hardware of the current *real* * state of the radio rfkill switch. * - * It may not be called from an atomic context. + * Devices which are subject to external changes on their rfkill + * state (such as those caused by a hardware rfkill line) MUST + * have their driver arrange to call rfkill_force_state() as soon + * as possible after such a change. + * + * This function may not be called from an atomic context. */ int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) { @@ -367,6 +376,9 @@ static ssize_t rfkill_claim_store(struct device *dev, if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (rfkill->user_claim_unsupported) + return -EOPNOTSUPP; + /* * Take the global lock to make sure the kernel is not in * the middle of rfkill_switch_all @@ -375,19 +387,17 @@ static ssize_t rfkill_claim_store(struct device *dev, if (error) return error; - if (rfkill->user_claim_unsupported) { - error = -EOPNOTSUPP; - goto out_unlock; - } if (rfkill->user_claim != claim) { - if (!claim) + if (!claim) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type], 0); + mutex_unlock(&rfkill->mutex); + } rfkill->user_claim = claim; } -out_unlock: mutex_unlock(&rfkill_mutex); return error ? error : count; @@ -516,8 +526,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill) { mutex_lock(&rfkill_mutex); list_del_init(&rfkill->node); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); mutex_unlock(&rfkill_mutex); + + mutex_lock(&rfkill->mutex); + rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } /** @@ -526,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill) * @type: type of the switch (RFKILL_TYPE_*) * * This function should be called by the network driver when it needs - * rfkill structure. Once the structure is allocated the driver shoud - * finish its initialization by setting name, private data, enable_radio + * rfkill structure. Once the structure is allocated the driver should + * finish its initialization by setting the name, private data, enable_radio * and disable_radio methods and then register it with rfkill_register(). + * * NOTE: If registration fails the structure shoudl be freed by calling * rfkill_free() otherwise rfkill_unregister() should be used. */ @@ -560,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate); * rfkill_free - Mark rfkill structure for deletion * @rfkill: rfkill structure to be destroyed * - * Decrements reference count of rfkill structure so it is destroyed. + * Decrements reference count of the rfkill structure so it is destroyed. * Note that rfkill_free() should _not_ be called after rfkill_unregister(). */ void rfkill_free(struct rfkill *rfkill) @@ -585,8 +599,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) static void rfkill_led_trigger_unregister(struct rfkill *rfkill) { #ifdef CONFIG_RFKILL_LEDS - if (rfkill->led_trigger.name) + if (rfkill->led_trigger.name) { led_trigger_unregister(&rfkill->led_trigger); + rfkill->led_trigger.name = NULL; + } #endif } @@ -622,8 +638,8 @@ int rfkill_register(struct rfkill *rfkill) error = device_add(dev); if (error) { - rfkill_led_trigger_unregister(rfkill); rfkill_remove_switch(rfkill); + rfkill_led_trigger_unregister(rfkill); return error; } diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index b0601642e227..4840aff47256 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -572,44 +572,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev) static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, struct Qdisc *qdisc) { + struct Qdisc *oqdisc = dev_queue->qdisc_sleeping; spinlock_t *root_lock; - struct Qdisc *oqdisc; - int ingress; - - ingress = 0; - if (qdisc && qdisc->flags&TCQ_F_INGRESS) - ingress = 1; - - if (ingress) { - oqdisc = dev_queue->qdisc; - } else { - oqdisc = dev_queue->qdisc_sleeping; - } root_lock = qdisc_root_lock(oqdisc); spin_lock_bh(root_lock); - if (ingress) { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) { - /* delete */ - qdisc_reset(oqdisc); - dev_queue->qdisc = NULL; - } else { /* new */ - dev_queue->qdisc = qdisc; - } + /* Prune old scheduler */ + if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) + qdisc_reset(oqdisc); - } else { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) - qdisc_reset(oqdisc); - - /* ... and graft new one */ - if (qdisc == NULL) - qdisc = &noop_qdisc; - dev_queue->qdisc_sleeping = qdisc; - dev_queue->qdisc = &noop_qdisc; - } + /* ... and graft new one */ + if (qdisc == NULL) + qdisc = &noop_qdisc; + dev_queue->qdisc_sleeping = qdisc; + dev_queue->qdisc = &noop_qdisc; spin_unlock_bh(root_lock); @@ -678,7 +655,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, ingress = 0; num_q = dev->num_tx_queues; - if (q && q->flags & TCQ_F_INGRESS) { + if ((q && q->flags & TCQ_F_INGRESS) || + (new && new->flags & TCQ_F_INGRESS)) { num_q = 1; ingress = 1; } @@ -692,13 +670,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, if (!ingress) dev_queue = netdev_get_tx_queue(dev, i); - if (ingress) { - old = dev_graft_qdisc(dev_queue, q); - } else { - old = dev_graft_qdisc(dev_queue, new); - if (new && i > 0) - atomic_inc(&new->refcnt); - } + old = dev_graft_qdisc(dev_queue, new); + if (new && i > 0) + atomic_inc(&new->refcnt); + notify_and_destroy(skb, n, classid, old, new); } @@ -817,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, goto err_out3; } } - if (parent) + if (parent && !(sch->flags & TCQ_F_INGRESS)) list_add_tail(&sch->list, &dev_queue->qdisc->list); return sch; diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index fd2a6cadb115..9c9cd4d94890 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -135,7 +135,8 @@ static inline int qdisc_restart(struct Qdisc *q) txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb)); HARD_TX_LOCK(dev, txq, smp_processor_id()); - if (!netif_subqueue_stopped(dev, skb)) + if (!netif_tx_queue_stopped(txq) && + !netif_tx_queue_frozen(txq)) ret = dev_hard_start_xmit(skb, dev, txq); HARD_TX_UNLOCK(dev, txq); @@ -162,7 +163,8 @@ static inline int qdisc_restart(struct Qdisc *q) break; } - if (ret && netif_tx_queue_stopped(txq)) + if (ret && (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq))) ret = 0; return ret; @@ -596,7 +598,7 @@ static void transition_one_qdisc(struct net_device *dev, int *need_watchdog_p = _need_watchdog; rcu_assign_pointer(dev_queue->qdisc, new_qdisc); - if (new_qdisc != &noqueue_qdisc) + if (need_watchdog_p && new_qdisc != &noqueue_qdisc) *need_watchdog_p = 1; } @@ -619,6 +621,7 @@ void dev_activate(struct net_device *dev) need_watchdog = 0; netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog); + transition_one_qdisc(dev, &dev->rx_queue, NULL); if (need_watchdog) { dev->trans_start = jiffies; @@ -677,6 +680,7 @@ void dev_deactivate(struct net_device *dev) bool running; netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc); + dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc); dev_watchdog_down(dev); @@ -718,7 +722,7 @@ static void dev_init_scheduler_queue(struct net_device *dev, void dev_init_scheduler(struct net_device *dev) { netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc); - dev_init_scheduler_queue(dev, &dev->rx_queue, NULL); + dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev); } @@ -745,6 +749,6 @@ static void shutdown_scheduler_queue(struct net_device *dev, void dev_shutdown(struct net_device *dev) { netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); - shutdown_scheduler_queue(dev, &dev->rx_queue, NULL); + shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); WARN_ON(timer_pending(&dev->watchdog_timer)); } diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 537223642b6e..2c35c678563b 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -305,10 +305,11 @@ restart: switch (teql_resolve(skb, skb_res, slave)) { case 0: - if (netif_tx_trylock(slave)) { - if (!__netif_subqueue_stopped(slave, subq) && + if (__netif_tx_trylock(slave_txq)) { + if (!netif_tx_queue_stopped(slave_txq) && + !netif_tx_queue_frozen(slave_txq) && slave->hard_start_xmit(skb, slave) == 0) { - netif_tx_unlock(slave); + __netif_tx_unlock(slave_txq); master->slaves = NEXT_SLAVE(q); netif_wake_queue(dev); master->stats.tx_packets++; @@ -316,7 +317,7 @@ restart: qdisc_pkt_len(skb); return 0; } - netif_tx_unlock(slave); + __netif_tx_unlock(slave_txq); } if (netif_queue_stopped(dev)) busy = 1; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b7fefffd2d0d..59eb2cf42e5f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = { }; /* internal helper: get drv and dev */ -static int get_drv_dev_by_info_ifindex(struct genl_info *info, +static int get_drv_dev_by_info_ifindex(struct nlattr **attrs, struct cfg80211_registered_device **drv, struct net_device **dev) { int ifindex; - if (!info->attrs[NL80211_ATTR_IFINDEX]) + if (!attrs[NL80211_ATTR_IFINDEX]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]); + ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]); *dev = dev_get_by_index(&init_net, ifindex); if (!*dev) return -ENODEV; @@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * mutex_lock(&cfg80211_drv_mutex); list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (++wp_idx < wp_start) + if (wp_idx < wp_start) { + wp_idx++; continue; + } if_idx = 0; mutex_lock(&dev->devlist_mtx); list_for_each_entry(wdev, &dev->netdev_list, list) { - if (++if_idx < if_start) + if (if_idx < if_start) { + if_idx++; continue; + } if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev) < 0) - break; + wdev->netdev) < 0) { + mutex_unlock(&dev->devlist_mtx); + goto out; + } + if_idx++; } mutex_unlock(&dev->devlist_mtx); + + wp_idx++; } + out: mutex_unlock(&cfg80211_drv_mutex); cb->args[0] = wp_idx; @@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info) struct net_device *netdev; int err; - err = get_drv_dev_by_info_ifindex(info, &dev, &netdev); + err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev); if (err) return err; @@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) } else return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info) int ifindex, err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NL80211_ATTR_KEY_DEFAULT]) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) struct beacon_parameters params; int haveinfo = 0; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info) int err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_station(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct station_info sinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 mac_addr[ETH_ALEN]; + int ifidx = cb->args[0]; + int sta_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_station) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx, + mac_addr, &sinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_station) - continue; + if (nl80211_send_station(skb, + NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, mac_addr, + &sinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_station(&dev->wiphy, - wdev->netdev, sta_idx, mac_addr, - &sinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_station(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, mac_addr, - &sinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + sta_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = sta_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) @@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_action = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) ¶ms.station_flags)) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_mpath(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct mpath_info pinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 dst[ETH_ALEN]; u8 next_hop[ETH_ALEN]; + int ifidx = cb->args[0]; + int path_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_mpath) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx, + dst, next_hop, &pinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_mpath) - continue; + if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, dst, next_hop, + &pinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_mpath(&dev->wiphy, - wdev->netdev, sta_idx, dst, - next_hop, &pinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_mpath(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, dst, next_hop, - &pinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + path_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = path_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) @@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 8f038e6d5f98..418cd7dbbc93 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf, * marked __initdata will be discarded when the module has been intialized. * Likewise for modules used built-in the sections marked __exit * are discarded because __exit marked function are supposed to be called - * only when a moduel is unloaded which never happes for built-in modules. + * only when a module is unloaded which never happens for built-in modules. * The check_sec_ref() function traverses all relocation records * to find all references to a section that reference a section that will * be discarded and warns about it. diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 40d06c533f89..3ae9bec5a508 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb) int rc; rc = selinux_get_mnt_opts(sb, &opts); - if (rc) + if (rc) { + /* before policy load we may get EINVAL, don't show anything */ + if (rc == -EINVAL) + rc = 0; return rc; + } selinux_write_opts(m, &opts); diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 9ca113326143..54df8baf916f 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -42,7 +42,7 @@ #include <sound/info.h> #include <asm/io.h> #include <asm/dma.h> -#include <asm/dreamcast/sysasic.h> +#include <mach/sysasic.h> #include "aica.h" MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>"); |