diff options
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 47 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/sleep34xx.S | 143 |
2 files changed, 13 insertions, 177 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d1c82c..ae4017750bbe 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -40,8 +40,6 @@ #include <plat/gpmc.h> #include <plat/dma.h> -#include <asm/tlbflush.h> - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -64,11 +62,6 @@ static inline bool is_suspending(void) } #endif -/* Scratchpad offsets */ -#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 -#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 -#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8 - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -312,28 +305,9 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -/* Function to restore the table entry that was modified for enabling MMU */ -static void restore_table_entry(void) +static void omap34xx_do_sram_idle(unsigned long save_state) { - void __iomem *scratchpad_address; - u32 previous_value, control_reg_value; - u32 *address; - - scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); - - /* Get address of entry that was modified */ - address = (u32 *)__raw_readl(scratchpad_address + - OMAP343X_TABLE_ADDRESS_OFFSET); - /* Get the previous value which needs to be restored */ - previous_value = __raw_readl(scratchpad_address + - OMAP343X_TABLE_VALUE_OFFSET); - address = __va(address); - *address = previous_value; - flush_tlb_all(); - control_reg_value = __raw_readl(scratchpad_address - + OMAP343X_CONTROL_REG_VALUE_OFFSET); - /* This will enable caches and prediction */ - set_cr(control_reg_value); + _omap_sram_idle(omap3_arm_context, save_state); } void omap_sram_idle(void) @@ -432,12 +406,15 @@ void omap_sram_idle(void) sdrc_pwr = sdrc_read_reg(SDRC_POWER); /* - * omap3_arm_context is the location where ARM registers - * get saved. The restore path then reads from this - * location and restores them back. + * omap3_arm_context is the location where some ARM context + * get saved. The rest is placed on the stack, and restored + * from there before resuming. */ - _omap_sram_idle(omap3_arm_context, save_state); - cpu_init(); + if (save_state == 1 || save_state == 3) + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, save_state, + omap34xx_do_sram_idle); + else + omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ if (omap_rev() >= OMAP3430_REV_ES3_0 && @@ -445,10 +422,6 @@ void omap_sram_idle(void) core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); - /* Restore table entry modified during MMU restoration */ - if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) - restore_table_entry(); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 12e9da2f0263..9a1349ea460a 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -211,37 +211,6 @@ save_context_wfi: mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register stmia r8!, {r4-r5} @ Push parameters for restore call - /* Check what that target sleep state is from r1 */ - cmp r1, #0x2 @ Only L2 lost, no need to save context - beq clean_caches - -l1_logic_lost: - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - -clean_caches: /* * jump out to kernel flush routine * - reuse that code is better @@ -466,109 +435,11 @@ logic_l1_restore: orr r1, r1, #2 @ re-enable L2 cache mcr p15, 0, r1, c1, c0, 1 skipl2reen: - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - ldr r4, scratchpad_base - ldr r3, [r4,#0xBC] - adds r3, r3, #16 - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Enabling MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error -usettbr0: - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r1, table_entry - /* r1 has the value to be written to table entry*/ - add r1, r1, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - /* Storing previous entry of location being modified */ - ldr r5, scratchpad_base - ldr r4, [r2] - str r4, [r5, #0xC0] - /* Modify the table entry */ - str r1, [r2] - /* - * Storing address of entry being modified - * - will be restored after enabling MMU - */ - ldr r5, scratchpad_base - str r2, [r5, #0xC4] - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - /* Store previous value of control register in scratchpad */ - str r4, [r5, #0xC8] - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - ldr r0, =restoremmu_on - bx r0 - -/* - * ============================== - * == Exit point from OFF mode == - * ============================== - */ -restoremmu_on: - ldmfd sp!, {r4 - r11, pc} @ restore regs and return + /* Now branch to the common CPU resume function */ + b cpu_resume + .ltorg /* * Internal functions @@ -719,14 +590,6 @@ sram_base: .word SRAM_BASE_P + 0x8000 sdrc_power: .word SDRC_POWER_V -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -cache_pred_disable_mask: - .word 0xFFFFE7FB control_stat: .word CONTROL_STAT control_mem_rta: |