diff options
133 files changed, 2576 insertions, 3287 deletions
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index ecad6ee75705..6fab97ea7e6b 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers. iii. Plugging the queue to batch requests in anticipation of opportunities for merge/sort optimizations -This is just the same as in 2.4 so far, though per-device unplugging -support is anticipated for 2.5. Also with a priority-based i/o scheduler, -such decisions could be based on request priorities. - Plugging is an approach that the current i/o scheduling algorithm resorts to so that it collects up enough requests in the queue to be able to take advantage of the sorting/merging logic in the elevator. If the queue is empty when a request comes in, then it plugs the request queue -(sort of like plugging the bottom of a vessel to get fluid to build up) +(sort of like plugging the bath tub of a vessel to get fluid to build up) till it fills up with a few more requests, before starting to service the requests. This provides an opportunity to merge/sort the requests before passing them down to the device. There are various conditions when the queue is unplugged (to open up the flow again), either through a scheduled task or could be on demand. For example wait_on_buffer sets the unplugging going -(by running tq_disk) so the read gets satisfied soon. So in the read case, -the queue gets explicitly unplugged as part of waiting for completion, -in fact all queues get unplugged as a side-effect. +through sync_buffer() running blk_run_address_space(mapping). Or the caller +can do it explicity through blk_unplug(bdev). So in the read case, +the queue gets explicitly unplugged as part of waiting for completion on that +buffer. For page driven IO, the address space ->sync_page() takes care of +doing the blk_run_address_space(). Aside: This is kind of controversial territory, as it's not clear if plugging is @@ -1067,11 +1065,6 @@ Aside: multi-page bios being queued in one shot, we may not need to wait to merge a big request from the broken up pieces coming by. - Per-queue granularity unplugging (still a Todo) may help reduce some of the - concerns with just a single tq_disk flush approach. Something like - blk_kick_queue() to unplug a specific queue (right away ?) - or optionally, all queues, is in the plan. - 4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt index d0ab33e21fe6..b6d2e21474f9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -7,8 +7,10 @@ Required properties : Recommended properties : - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. + - compatible : compatibility list with 2 entries, the first should + be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor, + e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one + should be "fsl-i2c". - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -16,17 +18,31 @@ Recommended properties : controller you have. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - -Example : - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; + - fsl,preserve-clocking : boolean; if defined, the clock settings + from the bootloader are preserved (not touched). + - clock-frequency : desired I2C bus clock frequency in Hz. + +Examples : + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + cell-index = <0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + }; + diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c5948f2f9a25..88b7433d2f11 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -169,7 +169,7 @@ PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file, +chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file, the section of HD-audio driver. You can find a list of codecs and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible @@ -177,7 +177,7 @@ with Samsung Q1 Ultra. Thus, the first thing you can do for any brand-new, unsupported and non-working HD-audio hardware is to check HD-audio codec and several -different `model` option values. If you have a luck, some of them +different `model` option values. If you have any luck, some of them might suit with your device well. Some codecs such as ALC880 have a special model option `model=test`. diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d821694..1ba1bfdf00fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -543,6 +543,14 @@ S: Maintained F: arch/arm/lib/floppydma.S F: arch/arm/include/asm/floppy.h +ARM PORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/ + ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan F: drivers/mmc/host/mmci.* @@ -592,6 +600,13 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/CLKDEV SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +F: arch/arm/common/clkdev.c +F: arch/arm/include/asm/clkdev.h + ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT P: Mike Rapoport M: mike@compulab.co.il @@ -610,6 +625,15 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained +ARM/EBSA110 MACHINE SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/mach-ebsa110/ +F: drivers/net/arm/am79c961a.* + ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) P: Daniel Ribeiro M: drwyrm@gmail.com @@ -627,6 +651,15 @@ M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/FOOTBRIDGE ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/include/asm/hardware/dec21285.h +F: arch/arm/mach-footbridge/ + ARM/FREESCALE IMX / MXC ARM ARCHITECTURE P: Sascha Hauer M: kernel@pengutronix.de @@ -767,19 +800,27 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/RISCPC ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/common/time-acorn.c +F: arch/arm/include/asm/hardware/entry-macro-iomd.S +F: arch/arm/include/asm/hardware/ioc.h +F: arch/arm/include/asm/hardware/iomd.h +F: arch/arm/include/asm/hardware/memc.h +F: arch/arm/mach-rpc/ +F: drivers/net/arm/ether* +F: drivers/scsi/arm/ + ARM/SHARK MACHINE SUPPORT P: Alexander Schulz M: alex@shark-linux.de W: http://www.shark-linux.de/shark.html S: Maintained -ARM/STRONGARM110 PORT -P: Russell King -M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -W: http://www.arm.linux.org.uk/ -S: Maintained - ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-linux@fluff.org @@ -813,6 +854,14 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.mcuos.com S: Maintained +ARM/VFP SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/vfp/ + ARPD SUPPORT P: Jonathan Layes L: netdev@vger.kernel.org @@ -1372,6 +1421,11 @@ S: Maintained F: Documentation/input/cs461x.txt F: sound/pci/cs46xx/ +CLK API +P: Russell King +M: linux@arm.linux.org.uk +F: include/linux/clk.h + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu @@ -1576,7 +1630,8 @@ F: drivers/infiniband/hw/cxgb3/ CYBERPRO FB DRIVER P: Russell King -M: rmk@arm.linux.org.uk +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained F: drivers/video/cyber2000fb.* diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ecf0bfbab107..b2a781d9ce05 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig deleted file mode 100644 index bcd95b8dd2df..000000000000 --- a/arch/arm/configs/imx27ads_defconfig +++ /dev/null @@ -1,826 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:29:34 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -CONFIG_MACH_MX27ADS=y -# CONFIG_MACH_PCM038 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_FEC_OLD is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_IMX is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig index e05271753e15..0200d67e30ba 100644 --- a/arch/arm/configs/mx31ads_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:21:11 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:11:33 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_MX1ADS=y # # Freescale MXC Implementations # +CONFIG_ARCH_MX1=y # CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MX3 is not set # -# MX3 Options +# MX1 platforms: # -CONFIG_MACH_MX31ADS=y -# CONFIG_MACH_PCM037 is not set +CONFIG_MACH_MXLADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MXC_IRQ_PRIOR=y +# CONFIG_MXC_PWM is not set # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_OUTER_CACHE is not set # @@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,30 +263,41 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # -CONFIG_VFP=y +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -283,11 +306,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -446,17 +455,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -502,7 +537,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# # # SPI GPIO expanders: # -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# Sound +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_IMX=y +CONFIG_USB_IMX=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + # -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -643,6 +854,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_HW is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig index 41429a00f58c..083516cd0d7f 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:38:36 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 10:18:06 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -88,11 +99,10 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set CONFIG_ARCH_MX2=y # CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# +# CONFIG_MACH_MX21 is not set CONFIG_MACH_MX27=y # -# MX2 Platforms +# MX2 platforms: # -# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type @@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -255,30 +268,44 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -452,6 +478,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_FEC_OLD=y +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y @@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_SOC_CAMERA is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -732,8 +829,12 @@ CONFIG_FB=y # # Frame buffer hardware drivers # +CONFIG_FB_IMX=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -844,6 +974,11 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig index 4f41c4135685..72a8201a5370 100644 --- a/arch/arm/configs/mx31litekit_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,17 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 14:23:39 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:06:37 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -142,46 +150,54 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y +CONFIG_ARCH_MX31=y # -# MX3 Options +# MX3 platforms: # -# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_PCM037=y CONFIG_MACH_MX31LITE=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y @@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_COMMON_CLKDEV=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA is not set - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,33 +272,42 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -286,11 +316,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -451,18 +465,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -541,16 +547,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # -# USB Network Adapters +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -562,43 +562,7 @@ CONFIG_MII=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Watchdog Device Drivers +# Memory mapped GPIO expanders: # -# CONFIG_SOFT_WATCHDOG is not set # -# USB-based Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_USBPCWATCHDOG is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Sonics Silicon Backplane +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_CONFIG_MODE_0=y +CONFIG_MFD_WM8352_CONFIG_MODE_0=y +CONFIG_MFD_WM8350_I2C=y +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=y @@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9M001=y +CONFIG_SOC_CAMERA_MT9M111=y +CONFIG_SOC_CAMERA_MT9T031=y +CONFIG_SOC_CAMERA_MT9V022=y +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_MX3=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support @@ -719,9 +771,10 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -739,131 +792,79 @@ CONFIG_FB=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Miscellaneous USB options +# MMC/SD/SDIO Card Drivers # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# USB port drivers +# DMA Devices # -# CONFIG_USB_SERIAL is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_DMA_ENGINE=y # -# USB Miscellaneous drivers +# DMA Clients # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_WM8350=y # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -873,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig deleted file mode 100644 index 6e37c77c4760..000000000000 --- a/arch/arm/configs/pcm037_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 25 11:52:42 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_PCM037=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_SMSC911X=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 857f1dfac794..321c83e43a1e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -36,6 +36,8 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + unsigned long range_start; + unsigned long range_end; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) put_cpu_var(mmu_gathers); } -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +/* + * Memorize the range for the TLB flush. + */ +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} /* * In the case of tlb vma handling, we can optimise these away in the @@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) + if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } } static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); + if (!tlb->fullmm && tlb->range_end > 0) + flush_tlb_range(vma, tlb->range_start, tlb->range_end); } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 42623db7f870..e04173c7e621 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -83,6 +83,7 @@ #include <linux/net.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> struct oldabi_stat64 { unsigned long long st_dev; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6d9152de6074..ae24486f858a 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -100,7 +100,7 @@ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -static int ep93xx_timer_interrupt(int irq, void *dev_id) +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 7ae229bc1b79..e54057fb855b 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -28,9 +28,7 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/irqs.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif #include <mach/iomux.h> #include "devices.h" @@ -114,7 +112,6 @@ static struct platform_device flash_device = { * I2C */ -#ifdef CONFIG_I2C_IMX static int i2c_pins[] = { PA15_PF_I2C_SDA, PA16_PF_I2C_SCL, @@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { .platform_data = &pcf857x_data[1], }, }; -#endif /* * Board init @@ -172,12 +168,10 @@ static void __init mx1ads_init(void) mxc_register_device(&flash_device, &mx1ads_flash_data); /* I2C */ -#ifdef CONFIG_I2C_IMX i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); -#endif } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 2dee5c87614c..999d013e06e3 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) - _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) - _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) - _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) _REGISTER_CLOCK(NULL, "owire", owire_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index d6235583e979..194b8428bba4 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -19,6 +19,8 @@ config MACH_MX31ADS config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 83e5e8e1276f..a6d6efefa6aa 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { +static unsigned int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, @@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) wm8350->codec.platform_data = &imx32ads_wm8350_setup; + regulator_has_full_constraints(); + return 0; } diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c3648eff5137..b5227d837b2f 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -226,10 +226,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); - /* SMSC9215 IRQ pin */ + /* LAN9217 IRQ pin */ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), "pcm037-eth")) - gpio_direction_input(MX31_PIN_GPIO3_1); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 6c4283cec6f4..5a01e48fd8f1 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -251,32 +251,6 @@ static void __init qong_init_fpga(void) } /* - * This structure defines the MX31 memory map. - */ -static struct map_desc qong_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init qong_map_io(void) -{ - mxc_map_io(); - iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); -} - -/* * Board specific initialization. */ static void __init mxc_board_init(void) @@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = qong_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 67611dadb44e..bc0f73fbd4ca 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,7 +28,6 @@ #include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> -#include <linux/delay.h> #include <media/soc_camera.h> @@ -644,8 +643,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = { }; static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, + .rx_threshold = 1, + .tx_threshold = 1, + .gpio_cs = -1, }; static struct tdo24m_platform_data em_x270_tdo24m_pdata = { diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3465268ca716..485fede83d97 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq(int irq_nr, int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 90230c6f9925..a88d7caff0d1 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -10,13 +10,13 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); #else -static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) extern void colibri_pxa3xx_init_lcd(int bl_pin); #else -static inline void colibri_pxa3xx_init_lcd(int) {} +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} #endif #if defined(CONFIG_AX88796) diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 052bfe788ada..d15662aba008 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -37,7 +37,6 @@ /* USB */ #define GPIO_NR_PALMT5_USB_DETECT_N 15 -#define GPIO_NR_PALMT5_USB_POWER 95 #define GPIO_NR_PALMT5_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 9f7d62fb4cbb..e74082c872e1 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 0680f1a575a3..d7f81068c613 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* MATRIX KEYPAD */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, @@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = { /* setup udc GPIOs initial state */ static void __init palmt5_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); - gpio_free(GPIO_NR_PALMT5_USB_POWER); + if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMT5_USB_PULLUP); } } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 59d0c1cba556..14393d0ad8b8 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /* USB */ GPIO13_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -514,9 +515,9 @@ static void __init palmtx_map_io(void) /* setup udc GPIOs initial state */ static void __init palmtx_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); - gpio_free(GPIO_NR_PALMTX_USB_POWER); + if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTX_USB_PULLUP); } } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 332bd3263eaf..8f0d37d43b43 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -52,7 +52,6 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/udc.h> -#include <plat/iic.h> static struct map_desc jive_iodesc[] __initdata = { }; @@ -278,7 +277,7 @@ __setup("mtdset=", jive_mtdset); #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) -struct s3c2410fb_display jive_vgg2432a4_display[] = { +static struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, @@ -311,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info jive_lcd_config = { +static struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b05d56e230a1..9c6abf9fb540 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = { /* IDE channels */ -struct pata_platform_info anubis_ide_platdata = { +static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 41a00f57e5da..c8a46685ce38 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, - .init_machine = osiris_init, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 25f7935576f8..7f473e47e4f1 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + gpio_request(S3C64XX_GPN(5), "LCD power"); + gpio_request(S3C64XX_GPF(13), "LCD power"); + gpio_request(S3C64XX_GPF(15), "LCD power"); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 83fb72c4048a..599217b2e13f 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -27,6 +27,4 @@ struct imxuart_platform_data { unsigned int flags; }; -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index ab838cfe94f9..57e927a1fd3a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -518,6 +518,8 @@ enum iomux_pins { */ #define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) @@ -558,6 +560,16 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) #define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) @@ -585,6 +597,42 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index c02b8fc2d821..518a36504b88 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -45,7 +45,7 @@ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index e8c4cf56c24e..8b070a041a99 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -54,9 +54,6 @@ #define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (6*32 + 16) - /* fixed interrupt numbers */ #define MXC_INT_USBCTRL 58 #define MXC_INT_USBCTRL 58 diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 6e7578a3514b..0fb68a531f55 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -50,23 +50,27 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) +int imx_irq_set_priority(unsigned char irq, unsigned char prio) { +#ifdef CONFIG_MXC_IRQ_PRIOR unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq > 63) - return; + if (irq >= MXC_INTERNAL_IRQS) + return -EINVAL;; temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + + return 0; +#else + return -ENOSYS; +#endif } EXPORT_SYMBOL(imx_irq_set_priority); -#endif #ifdef CONFIG_FIQ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 7642b975a998..08044dec9731 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gpio.h> #include <linux/io.h> @@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) return ret; } +EXPORT_SYMBOL(s3c_gpio_cfgpin); int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { @@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) return ret; } +EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 6b1b5231511c..26f0cec3ac04 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 9a5c767e0a42..91adfa71c172 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc) readl(adc->regs + S3C2410_ADCDLY)); } -void s3c_adc_try(struct adc_device *adc) +static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; @@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 94a341aaa4e4..5c0491bf738b 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5b50e1ac6179..4c7804551362 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -462,7 +462,7 @@ config PPC_64K_PAGES config PPC_256K_PAGES bool "256k page size" if 44x - depends on !STDBINUTILS && (!SHMEM || BROKEN) + depends on !STDBINUTILS help Make the page size 256k. diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 231bae756637..b6f1fc6eb960 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -84,9 +84,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 4356a1f08295..fa6a3d54a8a5 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -83,9 +83,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 19aa72301c83..00f7ed7a2455 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { @@ -247,7 +247,7 @@ interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; - phy-handle = <&phy3>; + phy-handle = <&phy4>; mdio@520 { #address-cells = <1>; @@ -275,7 +275,7 @@ interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; - phy-handle = <&phy4>; + phy-handle = <&phy5>; mdio@520 { #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 49145a04fc6c..673e4a778ac8 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { @@ -247,7 +247,7 @@ interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; - phy-handle = <&phy3>; + phy-handle = <&phy4>; mdio@520 { #address-cells = <1>; @@ -275,7 +275,7 @@ interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; - phy-handle = <&phy4>; + phy-handle = <&phy5>; mdio@520 { #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 06d366ebbda3..6a99f1eef7ad 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -83,9 +83,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index feff915e0492..b6c2d71defd3 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -85,9 +85,9 @@ interrupt-parent = <&mpic>; dfsrr; - dtt@50 { + dtt@48 { compatible = "national,lm75"; - reg = <0x50>; + reg = <0x48>; }; rtc@68 { diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 0bc45975911a..43030fea2eee 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:20 2009 +# Linux kernel version: 2.6.29-rc7 +# Mon Mar 16 09:03:28 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -75,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -152,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -202,7 +207,7 @@ CONFIG_MPIC=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -244,6 +249,7 @@ CONFIG_UNEVICTABLE_LRU=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,6 +265,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_FSL_LBC=y CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y @@ -284,10 +291,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y @@ -363,12 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set +# CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,27 +474,18 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_FSL_ELBC is not set -# CONFIG_MTD_NAND_FSL_UPM is not set +CONFIG_MTD_NAND_FSL_UPM=y # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_GLUEBI is not set - -# -# UBI debugging options -# -# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set @@ -515,69 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -CONFIG_IDE_TIMINGS=y -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -# CONFIG_IDE_GD_ATAPI is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT8172 is not set -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SL82C105 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDE is not set # # SCSI device support @@ -650,7 +596,7 @@ CONFIG_MII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -CONFIG_E1000=y +# CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -668,6 +614,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -835,8 +782,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -975,26 +920,7 @@ CONFIG_HID=y # Special HID drivers # CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# +# CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1064,16 +990,9 @@ CONFIG_RTC_DRV_DS1307=y # # File systems # -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1122,8 +1041,17 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_UBIFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1184,6 +1112,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -1219,6 +1149,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -1236,6 +1167,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h index 6d406c5c5de4..9696cc36d2dc 100644 --- a/arch/powerpc/include/asm/futex.h +++ b/arch/powerpc/include/asm/futex.h @@ -27,7 +27,7 @@ PPC_LONG "1b,4b,2b,4b\n" \ ".previous" \ : "=&r" (oldval), "=&r" (ret) \ - : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ + : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \ : "cr0", "memory") static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) @@ -47,19 +47,19 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("", ret, oldval, uaddr, oparg); + __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); + __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index cbf154387091..86d2366ab6a1 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,6 +52,12 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) +/* This indicates that the processor uses the wrong opcode for tlbilx + * instructions. During the ISA 2.06 development the opcode for tlbilx + * changed and some early implementations used to old opcode + */ +#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) + #ifndef __ASSEMBLY__ #include <asm/cputable.h> diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index f4a4db8d5555..ef4da37f3c10 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -43,7 +43,8 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a -#define PPC_INST_TLBILX 0x7c000626 +#define PPC_INST_TLBILX 0x7c000024 +#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -63,10 +64,18 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | \ + __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) + +#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ + __PPC_T_TLB(t) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) +#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) +#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687544f3..57db50f40289 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX, + MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 7af72970faed..ad2eb4d34dd4 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -125,7 +125,6 @@ static void do_flush_tlb_page_ipi(void *param) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t cpu_mask; unsigned int pid; preempt_disable(); diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 788b87c36f77..45fed3698349 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -138,7 +138,11 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - PPC_TLBILX_ALL(0,0) + BEGIN_MMU_FTR_SECTION_NESTED(96) + PPC_TLBILX_ALL(0,r3) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_ALL_EARLY(0,r3) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -151,7 +155,11 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 + BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_PID_EARLY(0,0) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -185,7 +193,11 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE + BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) + MMU_FTR_SECTION_ELSE_NESTED(96) + PPC_TLBILX_VA_EARLY(0,r3) + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index fafcaa0e81ef..ab69925d579b 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -25,6 +25,7 @@ #include <asm/smp.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/firmware.h> #include "plpar_wrappers.h" diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 380420f8c400..9a2a6e32f00f 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -182,6 +182,8 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) if (!driver) return; + dev->error_state = pci_channel_io_normal; + eeh_enable_irq(dev); if (!driver->err_handler || diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 837c2c4cc203..ecdb682ab516 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -204,7 +204,13 @@ static void drv_read(struct drv_cmd *cmd) static void drv_write(struct drv_cmd *cmd) { + int this_cpu; + + this_cpu = get_cpu(); + if (cpumask_test_cpu(this_cpu, cmd->mask)) + do_drv_write(cmd); smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); + put_cpu(); } static u32 get_cur_val(const struct cpumask *mask) diff --git a/block/as-iosched.c b/block/as-iosched.c index 631f6f44460a..c48fa670d221 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -17,9 +17,6 @@ #include <linux/rbtree.h> #include <linux/interrupt.h> -#define REQ_SYNC 1 -#define REQ_ASYNC 0 - /* * See Documentation/block/as-iosched.txt */ @@ -93,7 +90,7 @@ struct as_data { struct list_head fifo_list[2]; struct request *next_rq[2]; /* next in sort order */ - sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */ + sector_t last_sector[2]; /* last SYNC & ASYNC sectors */ unsigned long exit_prob; /* probability a task will exit while being waited on */ @@ -109,7 +106,7 @@ struct as_data { unsigned long last_check_fifo[2]; int changed_batch; /* 1: waiting for old batch to end */ int new_batch; /* 1: waiting on first read complete */ - int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */ + int batch_data_dir; /* current batch SYNC / ASYNC */ int write_batch_count; /* max # of reqs in a write batch */ int current_write_count; /* how many requests left this batch */ int write_batch_idled; /* has the write batch gone idle? */ @@ -554,7 +551,7 @@ static void as_update_iohist(struct as_data *ad, struct as_io_context *aic, if (aic == NULL) return; - if (data_dir == REQ_SYNC) { + if (data_dir == BLK_RW_SYNC) { unsigned long in_flight = atomic_read(&aic->nr_queued) + atomic_read(&aic->nr_dispatched); spin_lock(&aic->lock); @@ -811,7 +808,7 @@ static void as_update_rq(struct as_data *ad, struct request *rq) */ static void update_write_batch(struct as_data *ad) { - unsigned long batch = ad->batch_expire[REQ_ASYNC]; + unsigned long batch = ad->batch_expire[BLK_RW_ASYNC]; long write_time; write_time = (jiffies - ad->current_batch_expires) + batch; @@ -855,7 +852,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq) kblockd_schedule_work(q, &ad->antic_work); ad->changed_batch = 0; - if (ad->batch_data_dir == REQ_SYNC) + if (ad->batch_data_dir == BLK_RW_SYNC) ad->new_batch = 1; } WARN_ON(ad->nr_dispatched == 0); @@ -869,7 +866,7 @@ static void as_completed_request(struct request_queue *q, struct request *rq) if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) { update_write_batch(ad); ad->current_batch_expires = jiffies + - ad->batch_expire[REQ_SYNC]; + ad->batch_expire[BLK_RW_SYNC]; ad->new_batch = 0; } @@ -960,7 +957,7 @@ static inline int as_batch_expired(struct as_data *ad) if (ad->changed_batch || ad->new_batch) return 0; - if (ad->batch_data_dir == REQ_SYNC) + if (ad->batch_data_dir == BLK_RW_SYNC) /* TODO! add a check so a complete fifo gets written? */ return time_after(jiffies, ad->current_batch_expires); @@ -986,7 +983,7 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq) */ ad->last_sector[data_dir] = rq->sector + rq->nr_sectors; - if (data_dir == REQ_SYNC) { + if (data_dir == BLK_RW_SYNC) { struct io_context *ioc = RQ_IOC(rq); /* In case we have to anticipate after this */ copy_io_context(&ad->io_context, &ioc); @@ -1025,41 +1022,41 @@ static void as_move_to_dispatch(struct as_data *ad, struct request *rq) static int as_dispatch_request(struct request_queue *q, int force) { struct as_data *ad = q->elevator->elevator_data; - const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]); - const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]); + const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]); + const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]); struct request *rq; if (unlikely(force)) { /* * Forced dispatch, accounting is useless. Reset * accounting states and dump fifo_lists. Note that - * batch_data_dir is reset to REQ_SYNC to avoid + * batch_data_dir is reset to BLK_RW_SYNC to avoid * screwing write batch accounting as write batch * accounting occurs on W->R transition. */ int dispatched = 0; - ad->batch_data_dir = REQ_SYNC; + ad->batch_data_dir = BLK_RW_SYNC; ad->changed_batch = 0; ad->new_batch = 0; - while (ad->next_rq[REQ_SYNC]) { - as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]); + while (ad->next_rq[BLK_RW_SYNC]) { + as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]); dispatched++; } - ad->last_check_fifo[REQ_SYNC] = jiffies; + ad->last_check_fifo[BLK_RW_SYNC] = jiffies; - while (ad->next_rq[REQ_ASYNC]) { - as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]); + while (ad->next_rq[BLK_RW_ASYNC]) { + as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]); dispatched++; } - ad->last_check_fifo[REQ_ASYNC] = jiffies; + ad->last_check_fifo[BLK_RW_ASYNC] = jiffies; return dispatched; } /* Signal that the write batch was uncontended, so we can't time it */ - if (ad->batch_data_dir == REQ_ASYNC && !reads) { + if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) { if (ad->current_write_count == 0 || !writes) ad->write_batch_idled = 1; } @@ -1076,8 +1073,8 @@ static int as_dispatch_request(struct request_queue *q, int force) */ rq = ad->next_rq[ad->batch_data_dir]; - if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) { - if (as_fifo_expired(ad, REQ_SYNC)) + if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) { + if (as_fifo_expired(ad, BLK_RW_SYNC)) goto fifo_expired; if (as_can_anticipate(ad, rq)) { @@ -1090,7 +1087,7 @@ static int as_dispatch_request(struct request_queue *q, int force) /* we have a "next request" */ if (reads && !writes) ad->current_batch_expires = - jiffies + ad->batch_expire[REQ_SYNC]; + jiffies + ad->batch_expire[BLK_RW_SYNC]; goto dispatch_request; } } @@ -1101,20 +1098,20 @@ static int as_dispatch_request(struct request_queue *q, int force) */ if (reads) { - BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC])); + BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC])); - if (writes && ad->batch_data_dir == REQ_SYNC) + if (writes && ad->batch_data_dir == BLK_RW_SYNC) /* * Last batch was a read, switch to writes */ goto dispatch_writes; - if (ad->batch_data_dir == REQ_ASYNC) { + if (ad->batch_data_dir == BLK_RW_ASYNC) { WARN_ON(ad->new_batch); ad->changed_batch = 1; } - ad->batch_data_dir = REQ_SYNC; - rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next); + ad->batch_data_dir = BLK_RW_SYNC; + rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next); ad->last_check_fifo[ad->batch_data_dir] = jiffies; goto dispatch_request; } @@ -1125,9 +1122,9 @@ static int as_dispatch_request(struct request_queue *q, int force) if (writes) { dispatch_writes: - BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC])); + BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC])); - if (ad->batch_data_dir == REQ_SYNC) { + if (ad->batch_data_dir == BLK_RW_SYNC) { ad->changed_batch = 1; /* @@ -1137,11 +1134,11 @@ dispatch_writes: */ ad->new_batch = 0; } - ad->batch_data_dir = REQ_ASYNC; + ad->batch_data_dir = BLK_RW_ASYNC; ad->current_write_count = ad->write_batch_count; ad->write_batch_idled = 0; - rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next); - ad->last_check_fifo[REQ_ASYNC] = jiffies; + rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next); + ad->last_check_fifo[BLK_RW_ASYNC] = jiffies; goto dispatch_request; } @@ -1164,9 +1161,9 @@ fifo_expired: if (ad->nr_dispatched) return 0; - if (ad->batch_data_dir == REQ_ASYNC) + if (ad->batch_data_dir == BLK_RW_ASYNC) ad->current_batch_expires = jiffies + - ad->batch_expire[REQ_ASYNC]; + ad->batch_expire[BLK_RW_ASYNC]; else ad->new_batch = 1; @@ -1238,8 +1235,8 @@ static int as_queue_empty(struct request_queue *q) { struct as_data *ad = q->elevator->elevator_data; - return list_empty(&ad->fifo_list[REQ_ASYNC]) - && list_empty(&ad->fifo_list[REQ_SYNC]); + return list_empty(&ad->fifo_list[BLK_RW_ASYNC]) + && list_empty(&ad->fifo_list[BLK_RW_SYNC]); } static int @@ -1346,8 +1343,8 @@ static void as_exit_queue(struct elevator_queue *e) del_timer_sync(&ad->antic_timer); cancel_work_sync(&ad->antic_work); - BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC])); - BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC])); + BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC])); + BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC])); put_io_context(ad->io_context); kfree(ad); @@ -1372,18 +1369,18 @@ static void *as_init_queue(struct request_queue *q) init_timer(&ad->antic_timer); INIT_WORK(&ad->antic_work, as_work_handler); - INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]); - INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]); - ad->sort_list[REQ_SYNC] = RB_ROOT; - ad->sort_list[REQ_ASYNC] = RB_ROOT; - ad->fifo_expire[REQ_SYNC] = default_read_expire; - ad->fifo_expire[REQ_ASYNC] = default_write_expire; + INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]); + INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]); + ad->sort_list[BLK_RW_SYNC] = RB_ROOT; + ad->sort_list[BLK_RW_ASYNC] = RB_ROOT; + ad->fifo_expire[BLK_RW_SYNC] = default_read_expire; + ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire; ad->antic_expire = default_antic_expire; - ad->batch_expire[REQ_SYNC] = default_read_batch_expire; - ad->batch_expire[REQ_ASYNC] = default_write_batch_expire; + ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire; + ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire; - ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC]; - ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10; + ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC]; + ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10; if (ad->write_batch_count < 2) ad->write_batch_count = 2; @@ -1432,11 +1429,11 @@ static ssize_t __FUNC(struct elevator_queue *e, char *page) \ struct as_data *ad = e->elevator_data; \ return as_var_show(jiffies_to_msecs((__VAR)), (page)); \ } -SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]); -SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]); +SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]); +SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]); SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire); -SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]); -SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]); +SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]); +SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]); #undef SHOW_FUNCTION #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \ @@ -1451,13 +1448,14 @@ static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count) *(__PTR) = msecs_to_jiffies(*(__PTR)); \ return ret; \ } -STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX); -STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX); +STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX); +STORE_FUNCTION(as_write_expire_store, + &ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX); STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX); STORE_FUNCTION(as_read_batch_expire_store, - &ad->batch_expire[REQ_SYNC], 0, INT_MAX); + &ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX); STORE_FUNCTION(as_write_batch_expire_store, - &ad->batch_expire[REQ_ASYNC], 0, INT_MAX); + &ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX); #undef STORE_FUNCTION #define AS_ATTR(name) \ diff --git a/block/blk-barrier.c b/block/blk-barrier.c index f7dae57e6cab..20b4111fa050 100644 --- a/block/blk-barrier.c +++ b/block/blk-barrier.c @@ -319,9 +319,6 @@ int blkdev_issue_flush(struct block_device *bdev, sector_t *error_sector) return -ENXIO; bio = bio_alloc(GFP_KERNEL, 0); - if (!bio) - return -ENOMEM; - bio->bi_end_io = bio_end_empty_barrier; bio->bi_private = &wait; bio->bi_bdev = bdev; diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 73f36beff5cd..cac4e9febe6a 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -209,14 +209,14 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page, ssize_t ret = queue_var_store(&stats, page, count); spin_lock_irq(q->queue_lock); - elv_quisce_start(q); + elv_quiesce_start(q); if (stats) queue_flag_set(QUEUE_FLAG_IO_STAT, q); else queue_flag_clear(QUEUE_FLAG_IO_STAT, q); - elv_quisce_end(q); + elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); return ret; diff --git a/block/blk.h b/block/blk.h index 24fcaeeaf620..5dfc41267a08 100644 --- a/block/blk.h +++ b/block/blk.h @@ -70,8 +70,8 @@ void blk_queue_congestion_threshold(struct request_queue *q); int blk_dev_init(void); -void elv_quisce_start(struct request_queue *q); -void elv_quisce_end(struct request_queue *q); +void elv_quiesce_start(struct request_queue *q); +void elv_quiesce_end(struct request_queue *q); /* diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a4809de6fea6..0d3b70de3d80 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -56,9 +56,6 @@ static DEFINE_SPINLOCK(ioc_gone_lock); #define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE) #define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT) -#define ASYNC (0) -#define SYNC (1) - #define sample_valid(samples) ((samples) > 80) /* @@ -83,6 +80,14 @@ struct cfq_data { * rr list of queues with requests and the count of them */ struct cfq_rb_root service_tree; + + /* + * Each priority tree is sorted by next_request position. These + * trees are used when determining if two or more queues are + * interleaving requests (see cfq_close_cooperator). + */ + struct rb_root prio_trees[CFQ_PRIO_LISTS]; + unsigned int busy_queues; /* * Used to track any pending rt requests so we can pre-empt current @@ -147,6 +152,8 @@ struct cfq_queue { struct rb_node rb_node; /* service_tree key */ unsigned long rb_key; + /* prio tree member */ + struct rb_node p_node; /* sorted list of pending requests */ struct rb_root sort_list; /* if fifo isn't expired, next request to serve */ @@ -185,6 +192,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_prio_changed, /* task priority has changed */ CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ + CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */ }; #define CFQ_CFQQ_FNS(name) \ @@ -211,6 +219,7 @@ CFQ_CFQQ_FNS(idle_window); CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); +CFQ_CFQQ_FNS(coop); #undef CFQ_CFQQ_FNS #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ @@ -419,13 +428,17 @@ static struct cfq_queue *cfq_rb_first(struct cfq_rb_root *root) return NULL; } +static void rb_erase_init(struct rb_node *n, struct rb_root *root) +{ + rb_erase(n, root); + RB_CLEAR_NODE(n); +} + static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root) { if (root->left == n) root->left = NULL; - - rb_erase(n, &root->rb); - RB_CLEAR_NODE(n); + rb_erase_init(n, &root->rb); } /* @@ -470,8 +483,8 @@ static unsigned long cfq_slice_offset(struct cfq_data *cfqd, * requests waiting to be processed. It is sorted in the order that * we will service the queues. */ -static void cfq_service_tree_add(struct cfq_data *cfqd, - struct cfq_queue *cfqq, int add_front) +static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, + int add_front) { struct rb_node **p, *parent; struct cfq_queue *__cfqq; @@ -544,6 +557,63 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb); } +static struct cfq_queue * +cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, + struct rb_node **ret_parent, struct rb_node ***rb_link) +{ + struct rb_root *root = &cfqd->prio_trees[ioprio]; + struct rb_node **p, *parent; + struct cfq_queue *cfqq = NULL; + + parent = NULL; + p = &root->rb_node; + while (*p) { + struct rb_node **n; + + parent = *p; + cfqq = rb_entry(parent, struct cfq_queue, p_node); + + /* + * Sort strictly based on sector. Smallest to the left, + * largest to the right. + */ + if (sector > cfqq->next_rq->sector) + n = &(*p)->rb_right; + else if (sector < cfqq->next_rq->sector) + n = &(*p)->rb_left; + else + break; + p = n; + } + + *ret_parent = parent; + if (rb_link) + *rb_link = p; + return NULL; +} + +static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) +{ + struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio]; + struct rb_node **p, *parent; + struct cfq_queue *__cfqq; + + if (!RB_EMPTY_NODE(&cfqq->p_node)) + rb_erase_init(&cfqq->p_node, root); + + if (cfq_class_idle(cfqq)) + return; + if (!cfqq->next_rq) + return; + + __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, + &parent, &p); + BUG_ON(__cfqq); + + rb_link_node(&cfqq->p_node, parent, p); + rb_insert_color(&cfqq->p_node, root); +} + /* * Update cfqq's position in the service tree. */ @@ -552,8 +622,10 @@ static void cfq_resort_rr_list(struct cfq_data *cfqd, struct cfq_queue *cfqq) /* * Resorting requires the cfqq to be on the RR list already. */ - if (cfq_cfqq_on_rr(cfqq)) + if (cfq_cfqq_on_rr(cfqq)) { cfq_service_tree_add(cfqd, cfqq, 0); + cfq_prio_tree_add(cfqd, cfqq); + } } /* @@ -584,6 +656,8 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) if (!RB_EMPTY_NODE(&cfqq->rb_node)) cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree); + if (!RB_EMPTY_NODE(&cfqq->p_node)) + rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]); BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; @@ -613,7 +687,7 @@ static void cfq_add_rq_rb(struct request *rq) { struct cfq_queue *cfqq = RQ_CFQQ(rq); struct cfq_data *cfqd = cfqq->cfqd; - struct request *__alias; + struct request *__alias, *prev; cfqq->queued[rq_is_sync(rq)]++; @@ -630,7 +704,15 @@ static void cfq_add_rq_rb(struct request *rq) /* * check if this request is a better next-serve candidate */ + prev = cfqq->next_rq; cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq); + + /* + * adjust priority tree position, if ->next_rq changes + */ + if (prev != cfqq->next_rq) + cfq_prio_tree_add(cfqd, cfqq); + BUG_ON(!cfqq->next_rq); } @@ -843,11 +925,15 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd) /* * Get and set a new active queue for service. */ -static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd) +static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd, + struct cfq_queue *cfqq) { - struct cfq_queue *cfqq; + if (!cfqq) { + cfqq = cfq_get_next_queue(cfqd); + if (cfqq) + cfq_clear_cfqq_coop(cfqq); + } - cfqq = cfq_get_next_queue(cfqd); __cfq_set_active_queue(cfqd, cfqq); return cfqq; } @@ -871,17 +957,89 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean; } -static int cfq_close_cooperator(struct cfq_data *cfq_data, - struct cfq_queue *cfqq) +static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, + struct cfq_queue *cur_cfqq) +{ + struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio]; + struct rb_node *parent, *node; + struct cfq_queue *__cfqq; + sector_t sector = cfqd->last_position; + + if (RB_EMPTY_ROOT(root)) + return NULL; + + /* + * First, if we find a request starting at the end of the last + * request, choose it. + */ + __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio, + sector, &parent, NULL); + if (__cfqq) + return __cfqq; + + /* + * If the exact sector wasn't found, the parent of the NULL leaf + * will contain the closest sector. + */ + __cfqq = rb_entry(parent, struct cfq_queue, p_node); + if (cfq_rq_close(cfqd, __cfqq->next_rq)) + return __cfqq; + + if (__cfqq->next_rq->sector < sector) + node = rb_next(&__cfqq->p_node); + else + node = rb_prev(&__cfqq->p_node); + if (!node) + return NULL; + + __cfqq = rb_entry(node, struct cfq_queue, p_node); + if (cfq_rq_close(cfqd, __cfqq->next_rq)) + return __cfqq; + + return NULL; +} + +/* + * cfqd - obvious + * cur_cfqq - passed in so that we don't decide that the current queue is + * closely cooperating with itself. + * + * So, basically we're assuming that that cur_cfqq has dispatched at least + * one request, and that cfqd->last_position reflects a position on the disk + * associated with the I/O issued by cur_cfqq. I'm not sure this is a valid + * assumption. + */ +static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd, + struct cfq_queue *cur_cfqq, + int probe) { + struct cfq_queue *cfqq; + + /* + * A valid cfq_io_context is necessary to compare requests against + * the seek_mean of the current cfqq. + */ + if (!cfqd->active_cic) + return NULL; + /* * We should notice if some of the queues are cooperating, eg * working closely on the same area of the disk. In that case, * we can group them together and don't waste time idling. */ - return 0; + cfqq = cfqq_close(cfqd, cur_cfqq); + if (!cfqq) + return NULL; + + if (cfq_cfqq_coop(cfqq)) + return NULL; + + if (!probe) + cfq_mark_cfqq_coop(cfqq); + return cfqq; } + #define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024)) static void cfq_arm_slice_timer(struct cfq_data *cfqd) @@ -920,13 +1078,6 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) if (!cic || !atomic_read(&cic->ioc->nr_tasks)) return; - /* - * See if this prio level has a good candidate - */ - if (cfq_close_cooperator(cfqd, cfqq) && - (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2)) - return; - cfq_mark_cfqq_wait_request(cfqq); /* @@ -939,7 +1090,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT)); mod_timer(&cfqd->idle_slice_timer, jiffies + sl); - cfq_log(cfqd, "arm_idle: %lu", sl); + cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl); } /* @@ -1003,7 +1154,7 @@ cfq_prio_to_maxrq(struct cfq_data *cfqd, struct cfq_queue *cfqq) */ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) { - struct cfq_queue *cfqq; + struct cfq_queue *cfqq, *new_cfqq = NULL; cfqq = cfqd->active_queue; if (!cfqq) @@ -1037,6 +1188,16 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) goto keep_queue; /* + * If another queue has a request waiting within our mean seek + * distance, let it run. The expire code will check for close + * cooperators and put the close queue at the front of the service + * tree. + */ + new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0); + if (new_cfqq) + goto expire; + + /* * No requests pending. If the active queue still has requests in * flight or is idling for a new request, allow either of these * conditions to happen (or time out) before selecting a new queue. @@ -1050,7 +1211,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd) expire: cfq_slice_expired(cfqd, 0); new_queue: - cfqq = cfq_set_active_queue(cfqd); + cfqq = cfq_set_active_queue(cfqd, new_cfqq); keep_queue: return cfqq; } @@ -1333,14 +1494,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd, if (ioc->ioc_data == cic) rcu_assign_pointer(ioc->ioc_data, NULL); - if (cic->cfqq[ASYNC]) { - cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]); - cic->cfqq[ASYNC] = NULL; + if (cic->cfqq[BLK_RW_ASYNC]) { + cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]); + cic->cfqq[BLK_RW_ASYNC] = NULL; } - if (cic->cfqq[SYNC]) { - cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]); - cic->cfqq[SYNC] = NULL; + if (cic->cfqq[BLK_RW_SYNC]) { + cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]); + cic->cfqq[BLK_RW_SYNC] = NULL; } } @@ -1449,17 +1610,18 @@ static void changed_ioprio(struct io_context *ioc, struct cfq_io_context *cic) spin_lock_irqsave(cfqd->queue->queue_lock, flags); - cfqq = cic->cfqq[ASYNC]; + cfqq = cic->cfqq[BLK_RW_ASYNC]; if (cfqq) { struct cfq_queue *new_cfqq; - new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC); + new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc, + GFP_ATOMIC); if (new_cfqq) { - cic->cfqq[ASYNC] = new_cfqq; + cic->cfqq[BLK_RW_ASYNC] = new_cfqq; cfq_put_queue(cfqq); } } - cfqq = cic->cfqq[SYNC]; + cfqq = cic->cfqq[BLK_RW_SYNC]; if (cfqq) cfq_mark_cfqq_prio_changed(cfqq); @@ -1510,6 +1672,7 @@ retry: } RB_CLEAR_NODE(&cfqq->rb_node); + RB_CLEAR_NODE(&cfqq->p_node); INIT_LIST_HEAD(&cfqq->fifo); atomic_set(&cfqq->ref, 0); @@ -1905,10 +2068,20 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, * Remember that we saw a request from this process, but * don't start queuing just yet. Otherwise we risk seeing lots * of tiny requests, because we disrupt the normal plugging - * and merging. + * and merging. If the request is already larger than a single + * page, let it rip immediately. For that case we assume that + * merging is already done. Ditto for a busy system that + * has other work pending, don't risk delaying until the + * idle timer unplug to continue working. */ - if (cfq_cfqq_wait_request(cfqq)) + if (cfq_cfqq_wait_request(cfqq)) { + if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE || + cfqd->busy_queues > 1) { + del_timer(&cfqd->idle_slice_timer); + blk_start_queueing(cfqd->queue); + } cfq_mark_cfqq_must_dispatch(cfqq); + } } else if (cfq_should_preempt(cfqd, cfqq, rq)) { /* * not the active queue - expire current slice if it is @@ -1992,16 +2165,24 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) * or if we want to idle in case it has no pending requests. */ if (cfqd->active_queue == cfqq) { + const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list); + if (cfq_cfqq_slice_new(cfqq)) { cfq_set_prio_slice(cfqd, cfqq); cfq_clear_cfqq_slice_new(cfqq); } + /* + * If there are no requests waiting in this queue, and + * there are other queues ready to issue requests, AND + * those other queues are issuing requests within our + * mean seek distance, give them a chance to run instead + * of idling. + */ if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq)) cfq_slice_expired(cfqd, 1); - else if (sync && !rq_noidle(rq) && - RB_EMPTY_ROOT(&cfqq->sort_list)) { + else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) && + sync && !rq_noidle(rq)) cfq_arm_slice_timer(cfqd); - } } if (!cfqd->rq_in_driver) @@ -2062,7 +2243,7 @@ static int cfq_may_queue(struct request_queue *q, int rw) if (!cic) return ELV_MQUEUE_MAY; - cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC); + cfqq = cic_to_cfqq(cic, rw_is_sync(rw)); if (cfqq) { cfq_init_prio_data(cfqq, cic->ioc); cfq_prio_boost(cfqq); @@ -2152,11 +2333,10 @@ static void cfq_kick_queue(struct work_struct *work) struct cfq_data *cfqd = container_of(work, struct cfq_data, unplug_work); struct request_queue *q = cfqd->queue; - unsigned long flags; - spin_lock_irqsave(q->queue_lock, flags); + spin_lock_irq(q->queue_lock); blk_start_queueing(q); - spin_unlock_irqrestore(q->queue_lock, flags); + spin_unlock_irq(q->queue_lock); } /* diff --git a/block/elevator.c b/block/elevator.c index fb81bcc14a8c..7073a9072577 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -590,7 +590,7 @@ void elv_drain_elevator(struct request_queue *q) /* * Call with queue lock held, interrupts disabled */ -void elv_quisce_start(struct request_queue *q) +void elv_quiesce_start(struct request_queue *q) { queue_flag_set(QUEUE_FLAG_ELVSWITCH, q); @@ -607,7 +607,7 @@ void elv_quisce_start(struct request_queue *q) } } -void elv_quisce_end(struct request_queue *q) +void elv_quiesce_end(struct request_queue *q) { queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q); } @@ -1126,7 +1126,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) * Turn on BYPASS and drain all requests w/ elevator private data */ spin_lock_irq(q->queue_lock); - elv_quisce_start(q); + elv_quiesce_start(q); /* * Remember old elevator. @@ -1150,7 +1150,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) */ elevator_exit(old_elevator); spin_lock_irq(q->queue_lock); - elv_quisce_end(q); + elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name); diff --git a/block/ioctl.c b/block/ioctl.c index 0f22e629b13c..ad474d4bbcce 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -146,8 +146,6 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, struct bio *bio; bio = bio_alloc(GFP_KERNEL, 0); - if (!bio) - return -ENOMEM; bio->bi_end_io = blk_ioc_discard_endio; bio->bi_bdev = bdev; diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 626ee274c5c4..84b7f8709f41 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -217,7 +217,7 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, struct bio *bio) { - int ret = 0; + int r, ret = 0; /* * fill in all the output members @@ -242,7 +242,9 @@ static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr, ret = -EFAULT; } - blk_rq_unmap_user(bio); + r = blk_rq_unmap_user(bio); + if (!ret) + ret = r; blk_put_request(rq); return ret; diff --git a/drivers/block/brd.c b/drivers/block/brd.c index bdd4f5f45575..5f7e64ba87e5 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -275,8 +275,10 @@ static int brd_do_bvec(struct brd_device *brd, struct page *page, if (rw == READ) { copy_from_brd(mem + off, brd, sector, len); flush_dcache_page(page); - } else + } else { + flush_dcache_page(page); copy_to_brd(brd, mem + off, sector, len); + } kunmap_atomic(mem, KM_USER0); out: @@ -436,6 +438,7 @@ static struct brd_device *brd_alloc(int i) if (!brd->brd_queue) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); + blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL); blk_queue_max_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h deleted file mode 100644 index 345098b4ca77..000000000000 --- a/drivers/md/dm-bio-list.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2004 Red Hat UK Ltd. - * - * This file is released under the GPL. - */ - -#ifndef DM_BIO_LIST_H -#define DM_BIO_LIST_H - -#include <linux/bio.h> - -#ifdef CONFIG_BLOCK - -struct bio_list { - struct bio *head; - struct bio *tail; -}; - -static inline int bio_list_empty(const struct bio_list *bl) -{ - return bl->head == NULL; -} - -static inline void bio_list_init(struct bio_list *bl) -{ - bl->head = bl->tail = NULL; -} - -#define bio_list_for_each(bio, bl) \ - for (bio = (bl)->head; bio; bio = bio->bi_next) - -static inline unsigned bio_list_size(const struct bio_list *bl) -{ - unsigned sz = 0; - struct bio *bio; - - bio_list_for_each(bio, bl) - sz++; - - return sz; -} - -static inline void bio_list_add(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = NULL; - - if (bl->tail) - bl->tail->bi_next = bio; - else - bl->head = bio; - - bl->tail = bio; -} - -static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) -{ - bio->bi_next = bl->head; - - bl->head = bio; - - if (!bl->tail) - bl->tail = bio; -} - -static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->tail) - bl->tail->bi_next = bl2->head; - else - bl->head = bl2->head; - - bl->tail = bl2->tail; -} - -static inline void bio_list_merge_head(struct bio_list *bl, - struct bio_list *bl2) -{ - if (!bl2->head) - return; - - if (bl->head) - bl2->tail->bi_next = bl->head; - else - bl->tail = bl2->tail; - - bl->head = bl2->head; -} - -static inline struct bio *bio_list_pop(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - if (bio) { - bl->head = bl->head->bi_next; - if (!bl->head) - bl->tail = NULL; - - bio->bi_next = NULL; - } - - return bio; -} - -static inline struct bio *bio_list_get(struct bio_list *bl) -{ - struct bio *bio = bl->head; - - bl->head = bl->tail = NULL; - - return bio; -} - -#endif /* CONFIG_BLOCK */ -#endif diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 59ee1b015d2d..559dbb52bc85 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -15,8 +15,6 @@ #include <linux/device-mapper.h> -#include "dm-bio-list.h" - #define DM_MSG_PREFIX "delay" struct delay_c { diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 095f77bf9681..6a386ab4f7eb 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -8,7 +8,6 @@ #include <linux/device-mapper.h> #include "dm-path-selector.h" -#include "dm-bio-list.h" #include "dm-bio-record.h" #include "dm-uevent.h" diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 536ef0bef154..076fbb4e967a 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -5,7 +5,6 @@ * This file is released under the GPL. */ -#include "dm-bio-list.h" #include "dm-bio-record.h" #include <linux/init.h> diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c index 59f8d9df9e1a..7b899be0b087 100644 --- a/drivers/md/dm-region-hash.c +++ b/drivers/md/dm-region-hash.c @@ -14,7 +14,6 @@ #include <linux/vmalloc.h> #include "dm.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "region hash" diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 981a0413068f..d73f17fc7778 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -22,7 +22,6 @@ #include <linux/workqueue.h> #include "dm-exception-store.h" -#include "dm-bio-list.h" #define DM_MSG_PREFIX "snapshots" diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 8a994be035ba..424f7b048c30 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -6,7 +6,6 @@ */ #include "dm.h" -#include "dm-bio-list.h" #include "dm-uevent.h" #include <linux/init.h> diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 274b491a11c1..36df9109cde1 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -35,7 +35,6 @@ #include <linux/blkdev.h> #include <linux/seq_file.h> #include "md.h" -#include "dm-bio-list.h" #include "raid1.h" #include "bitmap.h" diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e293d92641ac..81a54f17417e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -22,7 +22,6 @@ #include <linux/blkdev.h> #include <linux/seq_file.h> #include "md.h" -#include "dm-bio-list.h" #include "raid10.h" #include "bitmap.h" diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index cc7708775da0..c140c9bb767c 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -153,7 +153,7 @@ struct ep93xx_descs struct ep93xx_priv { struct resource *res; - void *base_addr; + void __iomem *base_addr; int irq; struct ep93xx_descs *descs; diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 41ac94872b8d..e06686ae858b 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (tx_enabled(port)) { - disable_irq(ourport->tx_irq); + disable_irq_nosync(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(ourport->rx_irq); + disable_irq_nosync(ourport->rx_irq); rx_enabled(port) = 0; } } diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index c1688c71f052..c76feea5fe25 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -195,7 +195,7 @@ static void cs_deassert(struct driver_data *drv_data) struct chip_data *chip = drv_data->cur_chip; if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_ASSERT); + chip->cs_control(PXA2XX_CS_DEASSERT); return; } @@ -348,6 +348,24 @@ err: return NULL; } +/** + * bio_alloc - allocate a bio for I/O + * @gfp_mask: the GFP_ mask given to the slab allocator + * @nr_iovecs: number of iovecs to pre-allocate + * + * Description: + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at the time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocate bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. + * + **/ struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) { struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); diff --git a/fs/buffer.c b/fs/buffer.c index 13edf7ad3ff1..ff8bb1f2333a 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -547,7 +547,7 @@ repeat: return err; } -void do_thaw_all(unsigned long unused) +void do_thaw_all(struct work_struct *work) { struct super_block *sb; char b[BDEVNAME_SIZE]; @@ -567,6 +567,7 @@ restart: goto restart; } spin_unlock(&sb_lock); + kfree(work); printk(KERN_WARNING "Emergency Thaw complete\n"); } @@ -577,7 +578,13 @@ restart: */ void emergency_thaw_all(void) { - pdflush_operation(do_thaw_all, 0); + struct work_struct *work; + + work = kmalloc(sizeof(*work), GFP_ATOMIC); + if (work) { + INIT_WORK(work, do_thaw_all); + schedule_work(work); + } } /** diff --git a/fs/direct-io.c b/fs/direct-io.c index da258e7249cc..05763bbc2050 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -307,8 +307,6 @@ dio_bio_alloc(struct dio *dio, struct block_device *bdev, struct bio *bio; bio = bio_alloc(GFP_KERNEL, nr_vecs); - if (bio == NULL) - return -ENOMEM; bio->bi_bdev = bdev; bio->bi_sector = first_sector; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6132353dcf62..2a1cb0979768 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2416,8 +2416,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex) len = ee_len; bio = bio_alloc(GFP_NOIO, len); - if (!bio) - return -ENOMEM; bio->bi_sector = ee_pblock; bio->bi_bdev = inode->i_sb->s_bdev; diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 3984e47d1d33..1afd9f26bcb1 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -597,7 +597,6 @@ __acquires(&gl->gl_spin) GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)); - down_read(&gfs2_umount_flush_sem); if (test_bit(GLF_DEMOTE, &gl->gl_flags) && gl->gl_demote_state != gl->gl_state) { if (find_first_holder(gl)) @@ -614,15 +613,14 @@ __acquires(&gl->gl_spin) if (ret == 0) goto out_unlock; if (ret == 2) - goto out_sem; + goto out; gh = find_first_waiter(gl); gl->gl_target = gh->gh_state; if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) do_error(gl, 0); /* Fail queued try locks */ } do_xmote(gl, gh, gl->gl_target); -out_sem: - up_read(&gfs2_umount_flush_sem); +out: return; out_sched: @@ -631,7 +629,7 @@ out_sched: gfs2_glock_put(gl); out_unlock: clear_bit(GLF_LOCK, &gl->gl_flags); - goto out_sem; + goto out; } static void glock_work_func(struct work_struct *work) @@ -641,6 +639,7 @@ static void glock_work_func(struct work_struct *work) if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) finish_xmote(gl, gl->gl_reply); + down_read(&gfs2_umount_flush_sem); spin_lock(&gl->gl_spin); if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && @@ -653,6 +652,7 @@ static void glock_work_func(struct work_struct *work) } run_queue(gl, 0); spin_unlock(&gl->gl_spin); + up_read(&gfs2_umount_flush_sem); if (!delay || queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0) gfs2_glock_put(gl); diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 7b277d449155..5a31d426116f 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -137,15 +137,15 @@ void gfs2_set_iop(struct inode *inode) if (S_ISREG(mode)) { inode->i_op = &gfs2_file_iops; if (gfs2_localflocks(sdp)) - inode->i_fop = gfs2_file_fops_nolock; + inode->i_fop = &gfs2_file_fops_nolock; else - inode->i_fop = gfs2_file_fops; + inode->i_fop = &gfs2_file_fops; } else if (S_ISDIR(mode)) { inode->i_op = &gfs2_dir_iops; if (gfs2_localflocks(sdp)) - inode->i_fop = gfs2_dir_fops_nolock; + inode->i_fop = &gfs2_dir_fops_nolock; else - inode->i_fop = gfs2_dir_fops; + inode->i_fop = &gfs2_dir_fops; } else if (S_ISLNK(mode)) { inode->i_op = &gfs2_symlink_iops; } else { diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h index dca4fee3078b..c30be2b66580 100644 --- a/fs/gfs2/inode.h +++ b/fs/gfs2/inode.h @@ -101,21 +101,23 @@ void gfs2_dinode_print(const struct gfs2_inode *ip); extern const struct inode_operations gfs2_file_iops; extern const struct inode_operations gfs2_dir_iops; extern const struct inode_operations gfs2_symlink_iops; -extern const struct file_operations *gfs2_file_fops_nolock; -extern const struct file_operations *gfs2_dir_fops_nolock; +extern const struct file_operations gfs2_file_fops_nolock; +extern const struct file_operations gfs2_dir_fops_nolock; extern void gfs2_set_inode_flags(struct inode *inode); #ifdef CONFIG_GFS2_FS_LOCKING_DLM -extern const struct file_operations *gfs2_file_fops; -extern const struct file_operations *gfs2_dir_fops; +extern const struct file_operations gfs2_file_fops; +extern const struct file_operations gfs2_dir_fops; + static inline int gfs2_localflocks(const struct gfs2_sbd *sdp) { return sdp->sd_args.ar_localflocks; } #else /* Single node only */ -#define gfs2_file_fops NULL -#define gfs2_dir_fops NULL +#define gfs2_file_fops gfs2_file_fops_nolock +#define gfs2_dir_fops gfs2_dir_fops_nolock + static inline int gfs2_localflocks(const struct gfs2_sbd *sdp) { return 1; diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c index 70b9b8548945..101caf3ee861 100644 --- a/fs/gfs2/ops_file.c +++ b/fs/gfs2/ops_file.c @@ -705,7 +705,7 @@ static int gfs2_flock(struct file *file, int cmd, struct file_lock *fl) } } -const struct file_operations *gfs2_file_fops = &(const struct file_operations){ +const struct file_operations gfs2_file_fops = { .llseek = gfs2_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, @@ -723,7 +723,7 @@ const struct file_operations *gfs2_file_fops = &(const struct file_operations){ .setlease = gfs2_setlease, }; -const struct file_operations *gfs2_dir_fops = &(const struct file_operations){ +const struct file_operations gfs2_dir_fops = { .readdir = gfs2_readdir, .unlocked_ioctl = gfs2_ioctl, .open = gfs2_open, @@ -735,7 +735,7 @@ const struct file_operations *gfs2_dir_fops = &(const struct file_operations){ #endif /* CONFIG_GFS2_FS_LOCKING_DLM */ -const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){ +const struct file_operations gfs2_file_fops_nolock = { .llseek = gfs2_llseek, .read = do_sync_read, .aio_read = generic_file_aio_read, @@ -751,7 +751,7 @@ const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operat .setlease = generic_setlease, }; -const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){ +const struct file_operations gfs2_dir_fops_nolock = { .readdir = gfs2_readdir, .unlocked_ioctl = gfs2_ioctl, .open = gfs2_open, diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 51883b3ad89c..650a730707b7 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -272,11 +272,6 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector) lock_page(page); bio = bio_alloc(GFP_NOFS, 1); - if (unlikely(!bio)) { - __free_page(page); - return -ENOBUFS; - } - bio->bi_sector = sector * (sb->s_blocksize >> 9); bio->bi_bdev = sb->s_bdev; bio_add_page(bio, page, PAGE_SIZE, 0); diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index abd5429ae285..1c70fa5168d6 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -371,6 +371,7 @@ static int gfs2_symlink(struct inode *dir, struct dentry *dentry, ip = ghs[1].gh_gl->gl_object; ip->i_disksize = size; + i_size_write(inode, size); error = gfs2_meta_inode_buffer(ip, &dibh); diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 8d53f66b5bcc..152e6c4a0dca 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -81,7 +81,7 @@ struct gfs2_quota_change_host { static LIST_HEAD(qd_lru_list); static atomic_t qd_lru_count = ATOMIC_INIT(0); -static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(qd_lru_lock); int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask) { @@ -1364,7 +1364,7 @@ int gfs2_quotad(void *data) refrigerator(); t = min(quotad_timeo, statfs_timeo); - prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE); + prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE); spin_lock(&sdp->sd_trunc_lock); empty = list_empty(&sdp->sd_trunc_list); spin_unlock(&sdp->sd_trunc_lock); diff --git a/fs/inode.c b/fs/inode.c index d06d6d268de9..6ad14a1cd8c9 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1470,42 +1470,6 @@ static void __wait_on_freeing_inode(struct inode *inode) spin_lock(&inode_lock); } -/* - * We rarely want to lock two inodes that do not have a parent/child - * relationship (such as directory, child inode) simultaneously. The - * vast majority of file systems should be able to get along fine - * without this. Do not use these functions except as a last resort. - */ -void inode_double_lock(struct inode *inode1, struct inode *inode2) -{ - if (inode1 == NULL || inode2 == NULL || inode1 == inode2) { - if (inode1) - mutex_lock(&inode1->i_mutex); - else if (inode2) - mutex_lock(&inode2->i_mutex); - return; - } - - if (inode1 < inode2) { - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD); - } else { - mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT); - mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD); - } -} -EXPORT_SYMBOL(inode_double_lock); - -void inode_double_unlock(struct inode *inode1, struct inode *inode2) -{ - if (inode1) - mutex_unlock(&inode1->i_mutex); - - if (inode2 && inode2 != inode1) - mutex_unlock(&inode2->i_mutex); -} -EXPORT_SYMBOL(inode_double_unlock); - static __initdata unsigned long ihash_entries; static int __init set_ihash_entries(char *str) { diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8672b9536039..c2a87c885b73 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1912,6 +1912,22 @@ out_sems: return written ? written : ret; } +static int ocfs2_splice_to_file(struct pipe_inode_info *pipe, + struct file *out, + struct splice_desc *sd) +{ + int ret; + + ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos, + sd->total_len, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + return ret; + } + + return splice_from_pipe_feed(pipe, sd, pipe_to_file); +} + static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, struct file *out, loff_t *ppos, @@ -1919,38 +1935,76 @@ static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe, unsigned int flags) { int ret; - struct inode *inode = out->f_path.dentry->d_inode; + struct address_space *mapping = out->f_mapping; + struct inode *inode = mapping->host; + struct splice_desc sd = { + .total_len = len, + .flags = flags, + .pos = *ppos, + .u.file = out, + }; mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe, (unsigned int)len, out->f_path.dentry->d_name.len, out->f_path.dentry->d_name.name); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT); - ret = ocfs2_rw_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out; - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0, - NULL); - if (ret < 0) { - mlog_errno(ret); - goto out_unlock; - } + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = ocfs2_rw_lock(inode, 1); + if (ret < 0) + mlog_errno(ret); + else { + ret = ocfs2_splice_to_file(pipe, out, &sd); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags); - if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); -out_unlock: - ocfs2_rw_unlock(inode, 1); -out: - mutex_unlock(&inode->i_mutex); + if (sd.num_spliced) + ret = sd.num_spliced; + + if (ret > 0) { + unsigned long nr_pages; + + *ppos += ret; + nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + + /* + * If file or inode is SYNC and we actually wrote some data, + * sync it. + */ + if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { + int err; + + mutex_lock(&inode->i_mutex); + err = ocfs2_rw_lock(inode, 1); + if (err < 0) { + mlog_errno(err); + } else { + err = generic_osync_inode(inode, mapping, + OSYNC_METADATA|OSYNC_DATA); + ocfs2_rw_unlock(inode, 1); + } + mutex_unlock(&inode->i_mutex); + + if (err) + ret = err; + } + balance_dirty_pages_ratelimited_nr(mapping, nr_pages); + } mlog_exit(ret); return ret; diff --git a/fs/pipe.c b/fs/pipe.c index 4af7aa521813..13414ec45b8d 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -37,6 +37,42 @@ * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09 */ +static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass) +{ + if (pipe->inode) + mutex_lock_nested(&pipe->inode->i_mutex, subclass); +} + +void pipe_lock(struct pipe_inode_info *pipe) +{ + /* + * pipe_lock() nests non-pipe inode locks (for writing to a file) + */ + pipe_lock_nested(pipe, I_MUTEX_PARENT); +} +EXPORT_SYMBOL(pipe_lock); + +void pipe_unlock(struct pipe_inode_info *pipe) +{ + if (pipe->inode) + mutex_unlock(&pipe->inode->i_mutex); +} +EXPORT_SYMBOL(pipe_unlock); + +void pipe_double_lock(struct pipe_inode_info *pipe1, + struct pipe_inode_info *pipe2) +{ + BUG_ON(pipe1 == pipe2); + + if (pipe1 < pipe2) { + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + } else { + pipe_lock_nested(pipe2, I_MUTEX_CHILD); + pipe_lock_nested(pipe1, I_MUTEX_PARENT); + } +} + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe) { @@ -47,12 +83,10 @@ void pipe_wait(struct pipe_inode_info *pipe) * is considered a noninteractive wait: */ prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); schedule(); finish_wait(&pipe->wait, &wait); - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); } static int diff --git a/fs/splice.c b/fs/splice.c index c18aa7e03e2b..5384a90665d0 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -182,8 +182,7 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, do_wakeup = 0; page_nr = 0; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); for (;;) { if (!pipe->readers) { @@ -245,15 +244,13 @@ ssize_t splice_to_pipe(struct pipe_inode_info *pipe, pipe->waiting_writers--; } - if (pipe->inode) { - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); - } + if (do_wakeup) { + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN); } while (page_nr < spd_pages) @@ -555,8 +552,8 @@ static int pipe_to_sendpage(struct pipe_inode_info *pipe, * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create * a new page in the output file page cache and fill/dirty that. */ -static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, - struct splice_desc *sd) +int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) { struct file *file = sd->u.file; struct address_space *mapping = file->f_mapping; @@ -600,108 +597,178 @@ static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf, out: return ret; } +EXPORT_SYMBOL(pipe_to_file); + +static void wakeup_pipe_writers(struct pipe_inode_info *pipe) +{ + smp_mb(); + if (waitqueue_active(&pipe->wait)) + wake_up_interruptible(&pipe->wait); + kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); +} /** - * __splice_from_pipe - splice data from a pipe to given actor + * splice_from_pipe_feed - feed available data from a pipe to a file * @pipe: pipe to splice from * @sd: information to @actor * @actor: handler that splices the data * * Description: - * This function does little more than loop over the pipe and call - * @actor to do the actual moving of a single struct pipe_buffer to - * the desired destination. See pipe_to_file, pipe_to_sendpage, or - * pipe_to_user. + + * This function loops over the pipe and calls @actor to do the + * actual moving of a single struct pipe_buffer to the desired + * destination. It returns when there's no more buffers left in + * the pipe or if the requested number of bytes (@sd->total_len) + * have been copied. It returns a positive number (one) if the + * pipe needs to be filled with more data, zero if the required + * number of bytes have been copied and -errno on error. * + * This, together with splice_from_pipe_{begin,end,next}, may be + * used to implement the functionality of __splice_from_pipe() when + * locking is required around copying the pipe buffers to the + * destination. */ -ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, - splice_actor *actor) +int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) { - int ret, do_wakeup, err; - - ret = 0; - do_wakeup = 0; - - for (;;) { - if (pipe->nrbufs) { - struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; - const struct pipe_buf_operations *ops = buf->ops; + int ret; - sd->len = buf->len; - if (sd->len > sd->total_len) - sd->len = sd->total_len; + while (pipe->nrbufs) { + struct pipe_buffer *buf = pipe->bufs + pipe->curbuf; + const struct pipe_buf_operations *ops = buf->ops; - err = actor(pipe, buf, sd); - if (err <= 0) { - if (!ret && err != -ENODATA) - ret = err; + sd->len = buf->len; + if (sd->len > sd->total_len) + sd->len = sd->total_len; - break; - } + ret = actor(pipe, buf, sd); + if (ret <= 0) { + if (ret == -ENODATA) + ret = 0; + return ret; + } + buf->offset += ret; + buf->len -= ret; - ret += err; - buf->offset += err; - buf->len -= err; + sd->num_spliced += ret; + sd->len -= ret; + sd->pos += ret; + sd->total_len -= ret; - sd->len -= err; - sd->pos += err; - sd->total_len -= err; - if (sd->len) - continue; + if (!buf->len) { + buf->ops = NULL; + ops->release(pipe, buf); + pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); + pipe->nrbufs--; + if (pipe->inode) + sd->need_wakeup = true; + } - if (!buf->len) { - buf->ops = NULL; - ops->release(pipe, buf); - pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1); - pipe->nrbufs--; - if (pipe->inode) - do_wakeup = 1; - } + if (!sd->total_len) + return 0; + } - if (!sd->total_len) - break; - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_feed); - if (pipe->nrbufs) - continue; +/** + * splice_from_pipe_next - wait for some data to splice from + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wait for some data and return a positive + * value (one) if pipe buffers are available. It will return zero + * or -errno if no more data needs to be spliced. + */ +int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + while (!pipe->nrbufs) { if (!pipe->writers) - break; - if (!pipe->waiting_writers) { - if (ret) - break; - } + return 0; - if (sd->flags & SPLICE_F_NONBLOCK) { - if (!ret) - ret = -EAGAIN; - break; - } + if (!pipe->waiting_writers && sd->num_spliced) + return 0; - if (signal_pending(current)) { - if (!ret) - ret = -ERESTARTSYS; - break; - } + if (sd->flags & SPLICE_F_NONBLOCK) + return -EAGAIN; - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible_sync(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - do_wakeup = 0; + if (signal_pending(current)) + return -ERESTARTSYS; + + if (sd->need_wakeup) { + wakeup_pipe_writers(pipe); + sd->need_wakeup = false; } pipe_wait(pipe); } - if (do_wakeup) { - smp_mb(); - if (waitqueue_active(&pipe->wait)) - wake_up_interruptible(&pipe->wait); - kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT); - } + return 1; +} +EXPORT_SYMBOL(splice_from_pipe_next); - return ret; +/** + * splice_from_pipe_begin - start splicing from pipe + * @pipe: pipe to splice from + * + * Description: + * This function should be called before a loop containing + * splice_from_pipe_next() and splice_from_pipe_feed() to + * initialize the necessary fields of @sd. + */ +void splice_from_pipe_begin(struct splice_desc *sd) +{ + sd->num_spliced = 0; + sd->need_wakeup = false; +} +EXPORT_SYMBOL(splice_from_pipe_begin); + +/** + * splice_from_pipe_end - finish splicing from pipe + * @pipe: pipe to splice from + * @sd: information about the splice operation + * + * Description: + * This function will wake up pipe writers if necessary. It should + * be called after a loop containing splice_from_pipe_next() and + * splice_from_pipe_feed(). + */ +void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + if (sd->need_wakeup) + wakeup_pipe_writers(pipe); +} +EXPORT_SYMBOL(splice_from_pipe_end); + +/** + * __splice_from_pipe - splice data from a pipe to given actor + * @pipe: pipe to splice from + * @sd: information to @actor + * @actor: handler that splices the data + * + * Description: + * This function does little more than loop over the pipe and call + * @actor to do the actual moving of a single struct pipe_buffer to + * the desired destination. See pipe_to_file, pipe_to_sendpage, or + * pipe_to_user. + * + */ +ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd, + splice_actor *actor) +{ + int ret; + + splice_from_pipe_begin(sd); + do { + ret = splice_from_pipe_next(pipe, sd); + if (ret > 0) + ret = splice_from_pipe_feed(pipe, sd, actor); + } while (ret > 0); + splice_from_pipe_end(pipe, sd); + + return sd->num_spliced ? sd->num_spliced : ret; } EXPORT_SYMBOL(__splice_from_pipe); @@ -715,7 +782,7 @@ EXPORT_SYMBOL(__splice_from_pipe); * @actor: handler that splices the data * * Description: - * See __splice_from_pipe. This function locks the input and output inodes, + * See __splice_from_pipe. This function locks the pipe inode, * otherwise it's identical to __splice_from_pipe(). * */ @@ -724,7 +791,6 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, splice_actor *actor) { ssize_t ret; - struct inode *inode = out->f_mapping->host; struct splice_desc sd = { .total_len = len, .flags = flags, @@ -732,30 +798,15 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; - /* - * The actor worker might be calling ->write_begin and - * ->write_end. Most of the time, these expect i_mutex to - * be held. Since this may result in an ABBA deadlock with - * pipe->inode, we have to order lock acquiry here. - * - * Outer lock must be inode->i_mutex, as pipe_wait() will - * release and reacquire pipe->inode->i_mutex, AND inode must - * never be a pipe. - */ - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); + pipe_lock(pipe); ret = __splice_from_pipe(pipe, &sd, actor); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); - mutex_unlock(&inode->i_mutex); + pipe_unlock(pipe); return ret; } /** - * generic_file_splice_write_nolock - generic_file_splice_write without mutexes + * generic_file_splice_write - splice data from a pipe to a file * @pipe: pipe info * @out: file to write to * @ppos: position in @out @@ -764,13 +815,12 @@ ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out, * * Description: * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. The caller is responsible - * for acquiring i_mutex on both inodes. + * the given pipe inode to the given file. * */ ssize_t -generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) +generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, + loff_t *ppos, size_t len, unsigned int flags) { struct address_space *mapping = out->f_mapping; struct inode *inode = mapping->host; @@ -781,76 +831,28 @@ generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out, .u.file = out, }; ssize_t ret; - int err; - - err = file_remove_suid(out); - if (unlikely(err)) - return err; - - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (ret > 0) { - unsigned long nr_pages; - *ppos += ret; - nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + pipe_lock(pipe); - /* - * If file or inode is SYNC and we actually wrote some data, - * sync it. - */ - if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) { - err = generic_osync_inode(inode, mapping, - OSYNC_METADATA|OSYNC_DATA); - - if (err) - ret = err; - } - balance_dirty_pages_ratelimited_nr(mapping, nr_pages); - } + splice_from_pipe_begin(&sd); + do { + ret = splice_from_pipe_next(pipe, &sd); + if (ret <= 0) + break; - return ret; -} + mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD); + ret = file_remove_suid(out); + if (!ret) + ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file); + mutex_unlock(&inode->i_mutex); + } while (ret > 0); + splice_from_pipe_end(pipe, &sd); -EXPORT_SYMBOL(generic_file_splice_write_nolock); + pipe_unlock(pipe); -/** - * generic_file_splice_write - splice data from a pipe to a file - * @pipe: pipe info - * @out: file to write to - * @ppos: position in @out - * @len: number of bytes to splice - * @flags: splice modifier flags - * - * Description: - * Will either move or copy pages (determined by @flags options) from - * the given pipe inode to the given file. - * - */ -ssize_t -generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out, - loff_t *ppos, size_t len, unsigned int flags) -{ - struct address_space *mapping = out->f_mapping; - struct inode *inode = mapping->host; - struct splice_desc sd = { - .total_len = len, - .flags = flags, - .pos = *ppos, - .u.file = out, - }; - ssize_t ret; + if (sd.num_spliced) + ret = sd.num_spliced; - WARN_ON(S_ISFIFO(inode->i_mode)); - mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT); - ret = file_remove_suid(out); - if (likely(!ret)) { - if (pipe->inode) - mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD); - ret = __splice_from_pipe(pipe, &sd, pipe_to_file); - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); - } - mutex_unlock(&inode->i_mutex); if (ret > 0) { unsigned long nr_pages; @@ -1339,8 +1341,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, if (!pipe) return -EBADF; - if (pipe->inode) - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); error = ret = 0; while (nr_segs) { @@ -1395,8 +1396,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov, iov++; } - if (pipe->inode) - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); if (!ret) ret = error; @@ -1524,7 +1524,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (!pipe->nrbufs) { if (signal_pending(current)) { @@ -1542,7 +1542,7 @@ static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe_wait(pipe); } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1562,7 +1562,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) return 0; ret = 0; - mutex_lock(&pipe->inode->i_mutex); + pipe_lock(pipe); while (pipe->nrbufs >= PIPE_BUFFERS) { if (!pipe->readers) { @@ -1583,7 +1583,7 @@ static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags) pipe->waiting_writers--; } - mutex_unlock(&pipe->inode->i_mutex); + pipe_unlock(pipe); return ret; } @@ -1599,10 +1599,10 @@ static int link_pipe(struct pipe_inode_info *ipipe, /* * Potential ABBA deadlock, work around it by ordering lock - * grabbing by inode address. Otherwise two different processes + * grabbing by pipe info address. Otherwise two different processes * could deadlock (one doing tee from A -> B, the other from B -> A). */ - inode_double_lock(ipipe->inode, opipe->inode); + pipe_double_lock(ipipe, opipe); do { if (!opipe->readers) { @@ -1653,7 +1653,8 @@ static int link_pipe(struct pipe_inode_info *ipipe, if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK)) ret = -EAGAIN; - inode_double_unlock(ipipe->inode, opipe->inode); + pipe_unlock(ipipe); + pipe_unlock(opipe); /* * If we put data in the output pipe, wakeup any potential readers. diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore deleted file mode 100644 index e02c15d158fc..000000000000 --- a/include/asm-arm/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -arch -mach-types.h diff --git a/include/linux/bio.h b/include/linux/bio.h index b900d2c67d29..b89cf2d82898 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio) return bio && bio->bi_io_vec != NULL; } +/* + * BIO list managment for use by remapping drivers (e.g. DM or MD). + * + * A bio_list anchors a singly-linked list of bios chained through the bi_next + * member of the bio. The bio_list also caches the last list member to allow + * fast access to the tail. + */ +struct bio_list { + struct bio *head; + struct bio *tail; +}; + +static inline int bio_list_empty(const struct bio_list *bl) +{ + return bl->head == NULL; +} + +static inline void bio_list_init(struct bio_list *bl) +{ + bl->head = bl->tail = NULL; +} + +#define bio_list_for_each(bio, bl) \ + for (bio = (bl)->head; bio; bio = bio->bi_next) + +static inline unsigned bio_list_size(const struct bio_list *bl) +{ + unsigned sz = 0; + struct bio *bio; + + bio_list_for_each(bio, bl) + sz++; + + return sz; +} + +static inline void bio_list_add(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = NULL; + + if (bl->tail) + bl->tail->bi_next = bio; + else + bl->head = bio; + + bl->tail = bio; +} + +static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = bl->head; + + bl->head = bio; + + if (!bl->tail) + bl->tail = bio; +} + +static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->tail) + bl->tail->bi_next = bl2->head; + else + bl->head = bl2->head; + + bl->tail = bl2->tail; +} + +static inline void bio_list_merge_head(struct bio_list *bl, + struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->head) + bl2->tail->bi_next = bl->head; + else + bl->tail = bl2->tail; + + bl->head = bl2->head; +} + +static inline struct bio *bio_list_pop(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + if (bio) { + bl->head = bl->head->bi_next; + if (!bl->head) + bl->tail = NULL; + + bio->bi_next = NULL; + } + + return bio; +} + +static inline struct bio *bio_list_get(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + bl->head = bl->tail = NULL; + + return bio; +} + #if defined(CONFIG_BLK_DEV_INTEGRITY) #define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)])) diff --git a/include/linux/fs.h b/include/linux/fs.h index 562d2855cf30..e766be0d4329 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,6 +87,60 @@ struct inodes_stat_t { */ #define FMODE_NOCMTIME ((__force fmode_t)2048) +/* + * The below are the various read and write types that we support. Some of + * them include behavioral modifiers that send information down to the + * block layer and IO scheduler. Terminology: + * + * The block layer uses device plugging to defer IO a little bit, in + * the hope that we will see more IO very shortly. This increases + * coalescing of adjacent IO and thus reduces the number of IOs we + * have to send to the device. It also allows for better queuing, + * if the IO isn't mergeable. If the caller is going to be waiting + * for the IO, then he must ensure that the device is unplugged so + * that the IO is dispatched to the driver. + * + * All IO is handled async in Linux. This is fine for background + * writes, but for reads or writes that someone waits for completion + * on, we want to notify the block layer and IO scheduler so that they + * know about it. That allows them to make better scheduling + * decisions. So when the below references 'sync' and 'async', it + * is referencing this priority hint. + * + * With that in mind, the available types are: + * + * READ A normal read operation. Device will be plugged. + * READ_SYNC A synchronous read. Device is not plugged, caller can + * immediately wait on this read without caring about + * unplugging. + * READA Used for read-ahead operations. Lower priority, and the + * block layer could (in theory) choose to ignore this + * request if it runs into resource problems. + * WRITE A normal async write. Device will be plugged. + * SWRITE Like WRITE, but a special case for ll_rw_block() that + * tells it to lock the buffer first. Normally a buffer + * must be locked before doing IO. + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down + * the hint that someone will be waiting on this IO + * shortly. The device must still be unplugged explicitly, + * WRITE_SYNC_PLUG does not do this as we could be + * submitting more writes before we actually wait on any + * of them. + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device + * immediately after submission. The write equivalent + * of READ_SYNC. + * WRITE_ODIRECT Special case write for O_DIRECT only. + * SWRITE_SYNC + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer. + * See SWRITE. + * WRITE_BARRIER Like WRITE, but tells the block layer that all + * previously submitted writes must be safely on storage + * before this one is started. Also guarantees that when + * this write is complete, it itself is also safely on + * storage. Prevents reordering of writes on both sides + * of this IO. + * + */ #define RW_MASK 1 #define RWA_MASK 2 #define READ 0 @@ -102,6 +156,11 @@ struct inodes_stat_t { (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE)) #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) + +/* + * These aren't really reads or writes, they pass down information about + * parts of device that are now unused by the file system. + */ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) @@ -738,9 +797,6 @@ enum inode_i_mutex_lock_class I_MUTEX_QUOTA }; -extern void inode_double_lock(struct inode *inode1, struct inode *inode2); -extern void inode_double_unlock(struct inode *inode1, struct inode *inode2); - /* * NOTE: in a 32bit arch with a preemptable kernel and * an UP compile the i_size_read/write must be atomic @@ -2150,8 +2206,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); -extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *, - struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5e8b55..43fc95d822d5 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -43,10 +43,6 @@ * */ -/* Flags related to I2C device features */ -#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 -#define FSL_I2C_DEV_CLOCK_5200 0x00000002 - enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 8e4120285f72..c8f038554e80 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -134,6 +134,11 @@ struct pipe_buf_operations { memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE +/* Pipe lock and unlock operations */ +void pipe_lock(struct pipe_inode_info *); +void pipe_unlock(struct pipe_inode_info *); +void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe); diff --git a/include/linux/splice.h b/include/linux/splice.h index 528dcb93c2f2..5f3faa9d15ae 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -36,6 +36,8 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + size_t num_spliced; /* number of bytes already spliced */ + bool need_wakeup; /* need to wake up writer */ }; struct partial_page { @@ -66,6 +68,16 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, splice_actor *); extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct splice_desc *, splice_actor *); +extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *, + splice_actor *); +extern int splice_from_pipe_next(struct pipe_inode_info *, + struct splice_desc *); +extern void splice_from_pipe_begin(struct splice_desc *); +extern void splice_from_pipe_end(struct pipe_inode_info *, + struct splice_desc *); +extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); + extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, diff --git a/include/sound/jack.h b/include/sound/jack.h index 6b013c6f6a04..f236e426a706 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -50,6 +50,8 @@ struct snd_jack { int type; const char *id; char name[100]; + void *private_data; + void (*private_free)(struct snd_jack *); }; #ifdef CONFIG_SND_JACK diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 8904b1900d7f..c17296891617 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -268,7 +268,8 @@ struct snd_pcm_runtime { int overrange; snd_pcm_uframes_t avail_max; snd_pcm_uframes_t hw_ptr_base; /* Position at buffer restart */ - snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/ + snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */ + unsigned long hw_ptr_jiffies; /* Time when hw_ptr is updated */ /* -- HW params -- */ snd_pcm_access_t access; /* access mode */ diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 505f319e489c..8ba052c86d48 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -64,8 +64,6 @@ static int submit(int rw, pgoff_t page_off, struct page *page, struct bio *bio; bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); - if (!bio) - return -ENOMEM; bio->bi_sector = page_off * (PAGE_SIZE >> 9); bio->bi_bdev = resume_bdev; bio->bi_end_io = end_swap_bio_read; diff --git a/sound/core/control.c b/sound/core/control.c index 4b20fa2b7e6d..17b8d47a5cd0 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -723,14 +723,11 @@ static int snd_ctl_elem_read_user(struct snd_card *card, { struct snd_ctl_elem_value *control; int result; - - control = kmalloc(sizeof(*control), GFP_KERNEL); - if (control == NULL) - return -ENOMEM; - if (copy_from_user(control, _control, sizeof(*control))) { - kfree(control); - return -EFAULT; - } + + control = memdup_user(_control, sizeof(*control)); + if (IS_ERR(control)) + return PTR_ERR(control); + snd_power_lock(card); result = snd_power_wait(card, SNDRV_CTL_POWER_D0); if (result >= 0) @@ -784,13 +781,10 @@ static int snd_ctl_elem_write_user(struct snd_ctl_file *file, struct snd_card *card; int result; - control = kmalloc(sizeof(*control), GFP_KERNEL); - if (control == NULL) - return -ENOMEM; - if (copy_from_user(control, _control, sizeof(*control))) { - kfree(control); - return -EFAULT; - } + control = memdup_user(_control, sizeof(*control)); + if (IS_ERR(control)) + return PTR_ERR(control); + card = file->card; snd_power_lock(card); result = snd_power_wait(card, SNDRV_CTL_POWER_D0); @@ -916,13 +910,10 @@ static int snd_ctl_elem_user_tlv(struct snd_kcontrol *kcontrol, if (op_flag > 0) { if (size > 1024 * 128) /* sane value */ return -EINVAL; - new_data = kmalloc(size, GFP_KERNEL); - if (new_data == NULL) - return -ENOMEM; - if (copy_from_user(new_data, tlv, size)) { - kfree(new_data); - return -EFAULT; - } + + new_data = memdup_user(tlv, size); + if (IS_ERR(new_data)) + return PTR_ERR(new_data); change = ue->tlv_data_size != size; if (!change) change = memcmp(ue->tlv_data, new_data, size); diff --git a/sound/core/jack.c b/sound/core/jack.c index c8254c667c62..d54d1a05fe65 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -35,6 +35,9 @@ static int snd_jack_dev_free(struct snd_device *device) { struct snd_jack *jack = device->device_data; + if (jack->private_free) + jack->private_free(jack); + /* If the input device is registered with the input subsystem * then we need to use a different deallocator. */ if (jack->registered) diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index 36d7a5998234..08bfed594a83 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -232,14 +232,11 @@ static int snd_pcm_ioctl_hw_params_compat(struct snd_pcm_substream *substream, if (! (runtime = substream->runtime)) return -ENOTTY; - data = kmalloc(sizeof(*data), GFP_KERNEL); - if (data == NULL) - return -ENOMEM; /* only fifo_size is different, so just copy all */ - if (copy_from_user(data, data32, sizeof(*data32))) { - err = -EFAULT; - goto error; - } + data = memdup_user(data32, sizeof(*data32)); + if (IS_ERR(data)) + return PTR_ERR(data); + if (refine) err = snd_pcm_hw_refine(substream, data); else diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index fbb2e391591e..63d088f2265f 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -209,9 +209,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_uframes_t pos; - snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base; - snd_pcm_sframes_t delta; + snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base; + snd_pcm_sframes_t hdelta, delta; + unsigned long jdelta; + old_hw_ptr = runtime->status->hw_ptr; pos = snd_pcm_update_hw_ptr_pos(substream, runtime); if (pos == SNDRV_PCM_POS_XRUN) { xrun(substream); @@ -247,7 +249,30 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } - if (delta > runtime->period_size) { + hdelta = new_hw_ptr - old_hw_ptr; + jdelta = jiffies - runtime->hw_ptr_jiffies; + if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { + delta = jdelta / + (((runtime->period_size * HZ) / runtime->rate) + + HZ/100); + hw_ptr_error(substream, + "hw_ptr skipping! [Q] " + "(pos=%ld, delta=%ld, period=%ld, " + "jdelta=%lu/%lu/%lu)\n", + (long)pos, (long)hdelta, + (long)runtime->period_size, jdelta, + ((hdelta * HZ) / runtime->rate), delta); + hw_ptr_interrupt = runtime->hw_ptr_interrupt + + runtime->period_size * delta; + if (hw_ptr_interrupt >= runtime->boundary) + hw_ptr_interrupt -= runtime->boundary; + /* rebase to interrupt position */ + hw_base = new_hw_ptr = hw_ptr_interrupt; + /* align hw_base to buffer_size */ + hw_base -= hw_base % runtime->buffer_size; + delta = 0; + } + if (delta > runtime->period_size + runtime->period_size / 2) { hw_ptr_error(substream, "Lost interrupts? " "(stream=%i, delta=%ld, intr_ptr=%ld)\n", @@ -263,6 +288,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; + runtime->hw_ptr_jiffies = jiffies; runtime->hw_ptr_interrupt = hw_ptr_interrupt; return snd_pcm_update_hw_ptr_post(substream, runtime); @@ -275,6 +301,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) snd_pcm_uframes_t pos; snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base; snd_pcm_sframes_t delta; + unsigned long jdelta; old_hw_ptr = runtime->status->hw_ptr; pos = snd_pcm_update_hw_ptr_pos(substream, runtime); @@ -286,14 +313,15 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; delta = new_hw_ptr - old_hw_ptr; + jdelta = jiffies - runtime->hw_ptr_jiffies; if (delta < 0) { delta += runtime->buffer_size; if (delta < 0) { hw_ptr_error(substream, "Unexpected hw_pointer value [2] " - "(stream=%i, pos=%ld, old_ptr=%ld)\n", + "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n", substream->stream, (long)pos, - (long)old_hw_ptr); + (long)old_hw_ptr, jdelta); return 0; } hw_base += runtime->buffer_size; @@ -301,12 +329,13 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) hw_base = 0; new_hw_ptr = hw_base + pos; } - if (delta > runtime->period_size && runtime->periods > 1) { + if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) { hw_ptr_error(substream, "hw_ptr skipping! " - "(pos=%ld, delta=%ld, period=%ld)\n", + "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n", (long)pos, (long)delta, - (long)runtime->period_size); + (long)runtime->period_size, jdelta, + ((delta * HZ) / runtime->rate)); return 0; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && @@ -315,6 +344,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) runtime->hw_ptr_base = hw_base; runtime->status->hw_ptr = new_hw_ptr; + runtime->hw_ptr_jiffies = jiffies; return snd_pcm_update_hw_ptr_post(substream, runtime); } @@ -1441,6 +1471,7 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream, runtime->status->hw_ptr %= runtime->buffer_size; else runtime->status->hw_ptr = 0; + runtime->hw_ptr_jiffies = jiffies; snd_pcm_stream_unlock_irqrestore(substream, flags); return 0; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index a151fb01ba82..fc6f98e257df 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -327,21 +327,16 @@ static int snd_pcm_hw_refine_user(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params; int err; - params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(params, _params, sizeof(*params))) { - err = -EFAULT; - goto out; - } + params = memdup_user(_params, sizeof(*params)); + if (IS_ERR(params)) + return PTR_ERR(params); + err = snd_pcm_hw_refine(substream, params); if (copy_to_user(_params, params, sizeof(*params))) { if (!err) err = -EFAULT; } -out: + kfree(params); return err; } @@ -465,21 +460,16 @@ static int snd_pcm_hw_params_user(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params; int err; - params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(params, _params, sizeof(*params))) { - err = -EFAULT; - goto out; - } + params = memdup_user(_params, sizeof(*params)); + if (IS_ERR(params)) + return PTR_ERR(params); + err = snd_pcm_hw_params(substream, params); if (copy_to_user(_params, params, sizeof(*params))) { if (!err) err = -EFAULT; } -out: + kfree(params); return err; } @@ -2593,13 +2583,11 @@ static int snd_pcm_playback_ioctl1(struct file *file, return -EFAULT; if (copy_from_user(&xfern, _xfern, sizeof(xfern))) return -EFAULT; - bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL); - if (bufs == NULL) - return -ENOMEM; - if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) { - kfree(bufs); - return -EFAULT; - } + + bufs = memdup_user(xfern.bufs, + sizeof(void *) * runtime->channels); + if (IS_ERR(bufs)) + return PTR_ERR(bufs); result = snd_pcm_lib_writev(substream, bufs, xfern.frames); kfree(bufs); __put_user(result, &_xfern->result); @@ -2675,13 +2663,11 @@ static int snd_pcm_capture_ioctl1(struct file *file, return -EFAULT; if (copy_from_user(&xfern, _xfern, sizeof(xfern))) return -EFAULT; - bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL); - if (bufs == NULL) - return -ENOMEM; - if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) { - kfree(bufs); - return -EFAULT; - } + + bufs = memdup_user(xfern.bufs, + sizeof(void *) * runtime->channels); + if (IS_ERR(bufs)) + return PTR_ERR(bufs); result = snd_pcm_lib_readv(substream, bufs, xfern.frames); kfree(bufs); __put_user(result, &_xfern->result); @@ -3312,18 +3298,12 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream, int err; params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - oparams = kmalloc(sizeof(*oparams), GFP_KERNEL); - if (!oparams) { - err = -ENOMEM; - goto out; - } + if (!params) + return -ENOMEM; - if (copy_from_user(oparams, _oparams, sizeof(*oparams))) { - err = -EFAULT; + oparams = memdup_user(_oparams, sizeof(*oparams)); + if (IS_ERR(oparams)) { + err = PTR_ERR(oparams); goto out; } snd_pcm_hw_convert_from_old_params(params, oparams); @@ -3333,9 +3313,10 @@ static int snd_pcm_hw_refine_old_user(struct snd_pcm_substream *substream, if (!err) err = -EFAULT; } + + kfree(oparams); out: kfree(params); - kfree(oparams); return err; } @@ -3347,17 +3328,12 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream, int err; params = kmalloc(sizeof(*params), GFP_KERNEL); - if (!params) { - err = -ENOMEM; - goto out; - } - oparams = kmalloc(sizeof(*oparams), GFP_KERNEL); - if (!oparams) { - err = -ENOMEM; - goto out; - } - if (copy_from_user(oparams, _oparams, sizeof(*oparams))) { - err = -EFAULT; + if (!params) + return -ENOMEM; + + oparams = memdup_user(_oparams, sizeof(*oparams)); + if (IS_ERR(oparams)) { + err = PTR_ERR(oparams); goto out; } snd_pcm_hw_convert_from_old_params(params, oparams); @@ -3367,9 +3343,10 @@ static int snd_pcm_hw_params_old_user(struct snd_pcm_substream *substream, if (!err) err = -EFAULT; } + + kfree(oparams); out: kfree(params); - kfree(oparams); return err; } #endif /* CONFIG_SND_SUPPORT_OLD_API */ diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c index 38693f47c262..c956fe462569 100644 --- a/sound/core/seq/seq_compat.c +++ b/sound/core/seq/seq_compat.c @@ -48,12 +48,11 @@ static int snd_seq_call_port_info_ioctl(struct snd_seq_client *client, unsigned struct snd_seq_port_info *data; mm_segment_t fs; - data = kmalloc(sizeof(*data), GFP_KERNEL); - if (! data) - return -ENOMEM; + data = memdup_user(data32, sizeof(*data32)); + if (IS_ERR(data)) + return PTR_ERR(data); - if (copy_from_user(data, data32, sizeof(*data32)) || - get_user(data->flags, &data32->flags) || + if (get_user(data->flags, &data32->flags) || get_user(data->time_queue, &data32->time_queue)) goto error; data->kernel = NULL; diff --git a/sound/core/timer.c b/sound/core/timer.c index 3f0050d0b71e..8f8b17ac074d 100644 --- a/sound/core/timer.c +++ b/sound/core/timer.c @@ -1395,13 +1395,10 @@ static int snd_timer_user_ginfo(struct file *file, struct list_head *p; int err = 0; - ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL); - if (! ginfo) - return -ENOMEM; - if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) { - kfree(ginfo); - return -EFAULT; - } + ginfo = memdup_user(_ginfo, sizeof(*ginfo)); + if (IS_ERR(ginfo)) + return PTR_ERR(ginfo); + tid = ginfo->tid; memset(ginfo, 0, sizeof(*ginfo)); ginfo->tid = tid; diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c index 49037d074c71..bdc8dde4e4a2 100644 --- a/sound/isa/sb/sb16_csp.c +++ b/sound/isa/sb/sb16_csp.c @@ -684,15 +684,16 @@ static int snd_sb_csp_load(struct snd_sb_csp * p, const unsigned char *buf, int static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags) { - int err = -ENOMEM; - unsigned char *kbuf = kmalloc(size, GFP_KERNEL); - if (kbuf) { - if (copy_from_user(kbuf, buf, size)) - err = -EFAULT; - else - err = snd_sb_csp_load(p, kbuf, size, load_flags); - kfree(kbuf); - } + int err; + unsigned char *kbuf; + + kbuf = memdup_user(buf, size); + if (IS_ERR(kbuf)) + return PTR_ERR(kbuf); + + err = snd_sb_csp_load(p, kbuf, size, load_flags); + + kfree(kbuf); return err; } diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c index a4345fc07561..2bb1cee09255 100644 --- a/sound/isa/wavefront/wavefront_fx.c +++ b/sound/isa/wavefront/wavefront_fx.c @@ -202,15 +202,11 @@ snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file, "> 512 bytes to FX\n"); return -EIO; } - page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL); - if (!page_data) - return -ENOMEM; - if (copy_from_user (page_data, - (unsigned char __user *) r.data[3], - r.data[2] * sizeof(short))) { - kfree(page_data); - return -EFAULT; - } + page_data = memdup_user((unsigned char __user *) + r.data[3], + r.data[2] * sizeof(short)); + if (IS_ERR(page_data)) + return PTR_ERR(page_data); pd = page_data; } diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c index beb312cca75b..5d4ff48c4345 100644 --- a/sound/isa/wavefront/wavefront_synth.c +++ b/sound/isa/wavefront/wavefront_synth.c @@ -1664,12 +1664,11 @@ snd_wavefront_synth_ioctl (struct snd_hwdep *hw, struct file *file, break; case WFCTL_WFCMD: - wc = kmalloc(sizeof(*wc), GFP_KERNEL); - if (! wc) - return -ENOMEM; - if (copy_from_user (wc, argp, sizeof (*wc))) - err = -EFAULT; - else if (wavefront_synth_control (acard, wc) < 0) + wc = memdup_user(argp, sizeof(*wc)); + if (IS_ERR(wc)) + return PTR_ERR(wc); + + if (wavefront_synth_control (acard, wc) < 0) err = -EIO; else if (copy_to_user (argp, wc, sizeof (*wc))) err = -EFAULT; diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 191e1cd9997d..4b302d86f5f2 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -2493,24 +2493,17 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un case SNDRV_EMU10K1_IOCTL_CODE_POKE: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - icode = kmalloc(sizeof(*icode), GFP_KERNEL); - if (icode == NULL) - return -ENOMEM; - if (copy_from_user(icode, argp, sizeof(*icode))) { - kfree(icode); - return -EFAULT; - } + + icode = memdup_user(argp, sizeof(*icode)); + if (IS_ERR(icode)) + return PTR_ERR(icode); res = snd_emu10k1_icode_poke(emu, icode); kfree(icode); return res; case SNDRV_EMU10K1_IOCTL_CODE_PEEK: - icode = kmalloc(sizeof(*icode), GFP_KERNEL); - if (icode == NULL) - return -ENOMEM; - if (copy_from_user(icode, argp, sizeof(*icode))) { - kfree(icode); - return -EFAULT; - } + icode = memdup_user(argp, sizeof(*icode)); + if (IS_ERR(icode)) + return PTR_ERR(icode); res = snd_emu10k1_icode_peek(emu, icode); if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) { kfree(icode); @@ -2519,24 +2512,16 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un kfree(icode); return res; case SNDRV_EMU10K1_IOCTL_PCM_POKE: - ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL); - if (ipcm == NULL) - return -ENOMEM; - if (copy_from_user(ipcm, argp, sizeof(*ipcm))) { - kfree(ipcm); - return -EFAULT; - } + ipcm = memdup_user(argp, sizeof(*ipcm)); + if (IS_ERR(ipcm)) + return PTR_ERR(ipcm); res = snd_emu10k1_ipcm_poke(emu, ipcm); kfree(ipcm); return res; case SNDRV_EMU10K1_IOCTL_PCM_PEEK: - ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL); - if (ipcm == NULL) - return -ENOMEM; - if (copy_from_user(ipcm, argp, sizeof(*ipcm))) { - kfree(ipcm); - return -EFAULT; - } + ipcm = memdup_user(argp, sizeof(*ipcm)); + if (IS_ERR(ipcm)) + return PTR_ERR(ipcm); res = snd_emu10k1_ipcm_peek(emu, ipcm); if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) { kfree(ipcm); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a4e5e5952115..fd6e6f337d10 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2250,7 +2250,11 @@ int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid, err = bus->ops.command(bus, res); if (!err) { struct hda_cache_head *c; - u32 key = build_cmd_cache_key(nid, verb); + u32 key; + /* parm may contain the verb stuff for get/set amp */ + verb = verb | (parm >> 8); + parm &= 0xff; + key = build_cmd_cache_key(nid, verb); c = get_alloc_hash(&codec->cmd_cache, key); if (c) c->val = parm; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7ba8db5d4c42..bc882f8f163c 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -312,6 +312,9 @@ struct azx_dev { unsigned int period_bytes; /* size of the period in bytes */ unsigned int frags; /* number for period in the play buffer */ unsigned int fifo_size; /* FIFO size */ + unsigned int start_flag: 1; /* stream full start flag */ + unsigned long start_jiffies; /* start + minimum jiffies */ + unsigned long min_jiffies; /* minimum jiffies before position is valid */ void __iomem *sd_addr; /* stream descriptor pointer */ @@ -330,7 +333,6 @@ struct azx_dev { unsigned int opened :1; unsigned int running :1; unsigned int irq_pending :1; - unsigned int irq_ignore :1; /* * For VIA: * A flag to ensure DMA position is 0 @@ -975,7 +977,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) struct azx *chip = dev_id; struct azx_dev *azx_dev; u32 status; - int i; + int i, ok; spin_lock(&chip->reg_lock); @@ -991,18 +993,14 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); if (!azx_dev->substream || !azx_dev->running) continue; - /* ignore the first dummy IRQ (due to pos_adj) */ - if (azx_dev->irq_ignore) { - azx_dev->irq_ignore = 0; - continue; - } /* check whether this IRQ is really acceptable */ - if (azx_position_ok(chip, azx_dev)) { + ok = azx_position_ok(chip, azx_dev); + if (ok == 1) { azx_dev->irq_pending = 0; spin_unlock(&chip->reg_lock); snd_pcm_period_elapsed(azx_dev->substream); spin_lock(&chip->reg_lock); - } else if (chip->bus && chip->bus->workq) { + } else if (ok == 0 && chip->bus && chip->bus->workq) { /* bogus IRQ, process it later */ azx_dev->irq_pending = 1; queue_work(chip->bus->workq, @@ -1088,7 +1086,6 @@ static int azx_setup_periods(struct azx *chip, bdl = (u32 *)azx_dev->bdl.area; ofs = 0; azx_dev->frags = 0; - azx_dev->irq_ignore = 0; pos_adj = bdl_pos_adj[chip->dev_index]; if (pos_adj > 0) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -1109,7 +1106,6 @@ static int azx_setup_periods(struct azx *chip, &bdl, ofs, pos_adj, 1); if (ofs < 0) goto error; - azx_dev->irq_ignore = 1; } } else pos_adj = 0; @@ -1155,6 +1151,9 @@ static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev) while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) && --timeout) ; + + /* reset first position - may not be synced with hw at this time */ + *azx_dev->posbuf = 0; } /* @@ -1409,7 +1408,6 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) snd_pcm_set_sync(substream); mutex_unlock(&chip->open_mutex); - azx_stream_reset(chip, azx_dev); return 0; } @@ -1474,6 +1472,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) unsigned int bufsize, period_bytes, format_val; int err; + azx_stream_reset(chip, azx_dev); format_val = snd_hda_calc_stream_format(runtime->rate, runtime->channels, runtime->format, @@ -1502,6 +1501,8 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) return err; } + azx_dev->min_jiffies = (runtime->period_size * HZ) / + (runtime->rate * 2); azx_setup_controller(chip, azx_dev); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1; @@ -1518,13 +1519,14 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct azx *chip = apcm->chip; struct azx_dev *azx_dev; struct snd_pcm_substream *s; - int start, nsync = 0, sbits = 0; + int rstart = 0, start, nsync = 0, sbits = 0; int nwait, timeout; switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + rstart = 1; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_START: start = 1; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -1554,6 +1556,10 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) if (s->pcm->card != substream->pcm->card) continue; azx_dev = get_azx_dev(s); + if (rstart) { + azx_dev->start_flag = 1; + azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies; + } if (start) azx_stream_start(chip, azx_dev); else @@ -1703,6 +1709,11 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) { unsigned int pos; + if (azx_dev->start_flag && + time_before_eq(jiffies, azx_dev->start_jiffies)) + return -1; /* bogus (too early) interrupt */ + azx_dev->start_flag = 0; + pos = azx_get_position(chip, azx_dev); if (chip->position_fix == POS_FIX_AUTO) { if (!pos) { diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 1f2ad76ca94b..56ce19e68cb5 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -350,12 +350,20 @@ static int conexant_mux_enum_put(struct snd_kcontrol *kcontrol, } #ifdef CONFIG_SND_JACK +static void conexant_free_jack_priv(struct snd_jack *jack) +{ + struct conexant_jack *jacks = jack->private_data; + jacks->nid = 0; + jacks->jack = NULL; +} + static int conexant_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { struct conexant_spec *spec; struct conexant_jack *jack; const char *name; + int err; spec = codec->spec; snd_array_init(&spec->jacks, sizeof(*jack), 32); @@ -368,7 +376,12 @@ static int conexant_add_jack(struct hda_codec *codec, jack->nid = nid; jack->type = type; - return snd_jack_new(codec->bus->card, name, type, &jack->jack); + err = snd_jack_new(codec->bus->card, name, type, &jack->jack); + if (err < 0) + return err; + jack->jack->private_data = jack; + jack->jack->private_free = conexant_free_jack_priv; + return 0; } static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid) @@ -455,8 +468,10 @@ static void conexant_free(struct hda_codec *codec) if (spec->jacks.list) { struct conexant_jack *jacks = spec->jacks.list; int i; - for (i = 0; i < spec->jacks.used; i++) - snd_device_free(codec->bus->card, &jacks[i].jack); + for (i = 0; i < spec->jacks.used; i++, jacks++) { + if (jacks->jack) + snd_device_free(codec->bus->card, jacks->jack); + } snd_array_free(&spec->jacks); } #endif diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f35e58a2d921..6ed787eedd06 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8742,10 +8742,9 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), - SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550", + SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx", ALC883_FUJITSU_PI2515), - SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515), - SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530", + SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx", ALC888_FUJITSU_XA3530), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 61996a2f45df..ce30b459aee6 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3851,6 +3851,15 @@ static void stac_gpio_set(struct hda_codec *codec, unsigned int mask, AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */ } +#ifdef CONFIG_SND_JACK +static void stac92xx_free_jack_priv(struct snd_jack *jack) +{ + struct sigmatel_jack *jacks = jack->private_data; + jacks->nid = 0; + jacks->jack = NULL; +} +#endif + static int stac92xx_add_jack(struct hda_codec *codec, hda_nid_t nid, int type) { @@ -3860,6 +3869,7 @@ static int stac92xx_add_jack(struct hda_codec *codec, int def_conf = snd_hda_codec_get_pincfg(codec, nid); int connectivity = get_defcfg_connect(def_conf); char name[32]; + int err; if (connectivity && connectivity != AC_JACK_PORT_FIXED) return 0; @@ -3876,10 +3886,15 @@ static int stac92xx_add_jack(struct hda_codec *codec, snd_hda_get_jack_connectivity(def_conf), snd_hda_get_jack_location(def_conf)); - return snd_jack_new(codec->bus->card, name, type, &jack->jack); -#else - return 0; + err = snd_jack_new(codec->bus->card, name, type, &jack->jack); + if (err < 0) { + jack->nid = 0; + return err; + } + jack->jack->private_data = jack; + jack->jack->private_free = stac92xx_free_jack_priv; #endif + return 0; } static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid, @@ -4138,8 +4153,10 @@ static void stac92xx_free_jacks(struct hda_codec *codec) if (!codec->bus->shutdown && spec->jacks.list) { struct sigmatel_jack *jacks = spec->jacks.list; int i; - for (i = 0; i < spec->jacks.used; i++) - snd_device_free(codec->bus->card, &jacks[i].jack); + for (i = 0; i < spec->jacks.used; i++, jacks++) { + if (jacks->jack) + snd_device_free(codec->bus->card, jacks->jack); + } } snd_array_free(&spec->jacks); #endif diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 57648810eaf1..5dced5b79387 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -355,6 +355,9 @@ struct ichdev { unsigned int fragsize1; unsigned int position; unsigned int pos_shift; + unsigned int last_pos; + unsigned long last_pos_jiffies; + unsigned int jiffy_to_bytes; int frags; int lvi; int lvi_frag; @@ -838,7 +841,10 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd ichdev->suspended = 0; /* fallthru */ case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: val = ICH_IOCE | ICH_STARTBM; + ichdev->last_pos = ichdev->position; + ichdev->last_pos_jiffies = jiffies; break; case SNDRV_PCM_TRIGGER_SUSPEND: ichdev->suspended = 1; @@ -849,9 +855,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd case SNDRV_PCM_TRIGGER_PAUSE_PUSH: val = ICH_IOCE; break; - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - val = ICH_IOCE | ICH_STARTBM; - break; default: return -EINVAL; } @@ -1045,6 +1048,7 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream) ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1; } snd_intel8x0_setup_periods(chip, ichdev); + ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ; return 0; } @@ -1053,7 +1057,7 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs struct intel8x0 *chip = snd_pcm_substream_chip(substream); struct ichdev *ichdev = get_ichdev(substream); size_t ptr1, ptr; - int civ, timeout = 100; + int civ, timeout = 10; unsigned int position; spin_lock(&chip->reg_lock); @@ -1069,9 +1073,19 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) break; } while (timeout--); - ptr1 <<= ichdev->pos_shift; - ptr = ichdev->fragsize1 - ptr1; - ptr += position; + if (ptr1 != 0) { + ptr1 <<= ichdev->pos_shift; + ptr = ichdev->fragsize1 - ptr1; + ptr += position; + ichdev->last_pos = ptr; + ichdev->last_pos_jiffies = jiffies; + } else { + ptr1 = jiffies - ichdev->last_pos_jiffies; + if (ptr1) + ptr1 -= 1; + ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes; + ptr %= ichdev->size; + } spin_unlock(&chip->reg_lock); if (ptr >= ichdev->size) return 0; @@ -2661,12 +2675,14 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) struct snd_pcm_substream *subs; struct ichdev *ichdev; unsigned long port; - unsigned long pos, t; - struct timeval start_time, stop_time; + unsigned long pos, pos1, t; + int civ, timeout = 1000, attempt = 1; + struct timespec start_time, stop_time; if (chip->ac97_bus->clock != 48000) return; /* specified in module option */ + __again: subs = chip->pcm[0]->streams[0].substream; if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) { snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n"); @@ -2674,7 +2690,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) } ichdev = &chip->ichd[ICHD_PCMOUT]; ichdev->physbuf = subs->dma_buffer.addr; - ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE; + ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE; ichdev->substream = NULL; /* don't process interrupts */ /* set rate */ @@ -2693,16 +2709,31 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE); iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot); } - do_gettimeofday(&start_time); + do_posix_clock_monotonic_gettime(&start_time); spin_unlock_irq(&chip->reg_lock); msleep(50); spin_lock_irq(&chip->reg_lock); /* check the position */ - pos = ichdev->fragsize1; - pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift; - pos += ichdev->position; + do { + civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV); + pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb); + if (pos1 == 0) { + udelay(10); + continue; + } + if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) && + pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb)) + break; + } while (timeout--); + if (pos1 == 0) { /* oops, this value is not reliable */ + pos = 0; + } else { + pos = ichdev->fragsize1; + pos -= pos1 << ichdev->pos_shift; + pos += ichdev->position; + } chip->in_measurement = 0; - do_gettimeofday(&stop_time); + do_posix_clock_monotonic_gettime(&stop_time); /* stop */ if (chip->device_type == DEVICE_ALI) { iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16)); @@ -2717,19 +2748,37 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS); spin_unlock_irq(&chip->reg_lock); + if (pos == 0) { + snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n"); + __retry: + if (attempt < 2) { + attempt++; + goto __again; + } + return; + } + + pos /= 4; t = stop_time.tv_sec - start_time.tv_sec; t *= 1000000; - t += stop_time.tv_usec - start_time.tv_usec; - printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t); + t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000; + printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos); if (t == 0) { - snd_printk(KERN_ERR "?? calculation error..\n"); - return; + snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n"); + goto __retry; } - pos = (pos / 4) * 1000; + pos *= 1000; pos = (pos / t) * 1000 + ((pos % t) * 1000) / t; - if (pos < 40000 || pos >= 60000) + if (pos < 40000 || pos >= 60000) { /* abnormal value. hw problem? */ printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos); + goto __retry; + } else if (pos > 40500 && pos < 41500) + /* first exception - 41000Hz reference clock */ + chip->ac97_bus->clock = 41000; + else if (pos > 43600 && pos < 44600) + /* second exception - 44100HZ reference clock */ + chip->ac97_bus->clock = 44100; else if (pos < 47500 || pos > 48500) /* not 48000Hz, tuning the clock.. */ chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos; diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index f7c4544f7859..0625c342a1c9 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -27,8 +27,6 @@ #include <sound/soc.h> #include <sound/soc-dapm.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> #include <mach/magician.h> #include <asm/mach-types.h> #include "../codecs/uda1380.h" diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 2f3a21eee051..df494d1e346f 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,10 +1,10 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on ARCH_S3C2410 help Say Y or M if you want to add support for codecs attached to - the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will - also need to select the audio interfaces to support below. + the S3C24XX AC97 or I2S interfaces. You will also need to + select the audio interfaces to support below. config SND_S3C24XX_SOC_I2S tristate diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile index 23dadd5a11cd..388999653aaa 100644 --- a/sound/usb/caiaq/Makefile +++ b/sound/usb/caiaq/Makefile @@ -1,4 +1,4 @@ -snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o -snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o +snd-usb-caiaq-y := device.o audio.o midi.o control.o +snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/audio.c index 08d51e0c9fea..3f45c0fe61ab 100644 --- a/sound/usb/caiaq/caiaq-audio.c +++ b/sound/usb/caiaq/audio.c @@ -16,20 +16,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/spinlock.h> #include <linux/init.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/interrupt.h> #include <linux/usb.h> -#include <linux/spinlock.h> #include <sound/core.h> -#include <sound/initval.h> #include <sound/pcm.h> -#include <sound/rawmidi.h> -#include <linux/input.h> -#include "caiaq-device.h" -#include "caiaq-audio.h" +#include "device.h" +#include "audio.h" #define N_URBS 32 #define CLOCK_DRIFT_TOLERANCE 5 diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/audio.h index 8ab1f8d9529e..8ab1f8d9529e 100644 --- a/sound/usb/caiaq/caiaq-audio.h +++ b/sound/usb/caiaq/audio.h diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/control.c index e92c2bbf4fe9..537102ba6b9d 100644 --- a/sound/usb/caiaq/caiaq-control.c +++ b/sound/usb/caiaq/control.c @@ -18,17 +18,13 @@ */ #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/usb.h> +#include <sound/control.h> #include <sound/core.h> -#include <sound/initval.h> #include <sound/pcm.h> -#include <sound/rawmidi.h> -#include <sound/control.h> -#include <linux/input.h> -#include "caiaq-device.h" -#include "caiaq-control.h" +#include "device.h" +#include "control.h" #define CNT_INTVAL 0x10000 diff --git a/sound/usb/caiaq/caiaq-control.h b/sound/usb/caiaq/control.h index 2e7ab1aa4fb3..2e7ab1aa4fb3 100644 --- a/sound/usb/caiaq/caiaq-control.h +++ b/sound/usb/caiaq/control.h diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/device.c index cf573a982fdc..6d517705da0e 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/device.c @@ -19,27 +19,20 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/init.h> -#include <linux/module.h> #include <linux/moduleparam.h> #include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/init.h> #include <linux/usb.h> -#include <linux/input.h> -#include <linux/spinlock.h> -#include <sound/core.h> #include <sound/initval.h> +#include <sound/core.h> #include <sound/pcm.h> -#include <sound/rawmidi.h> -#include <sound/control.h> - -#include "caiaq-device.h" -#include "caiaq-audio.h" -#include "caiaq-midi.h" -#include "caiaq-control.h" -#ifdef CONFIG_SND_USB_CAIAQ_INPUT -#include "caiaq-input.h" -#endif +#include "device.h" +#include "audio.h" +#include "midi.h" +#include "control.h" +#include "input.h" MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13"); diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/device.h index 4cce1ad7493d..4cce1ad7493d 100644 --- a/sound/usb/caiaq/caiaq-device.h +++ b/sound/usb/caiaq/device.h diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/input.c index f743847a5e5a..a48d309bd94c 100644 --- a/sound/usb/caiaq/caiaq-input.c +++ b/sound/usb/caiaq/input.c @@ -17,17 +17,12 @@ */ #include <linux/init.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/input.h> #include <linux/usb.h> #include <linux/usb/input.h> -#include <linux/spinlock.h> -#include <sound/core.h> -#include <sound/rawmidi.h> #include <sound/pcm.h> -#include "caiaq-device.h" -#include "caiaq-input.h" + +#include "device.h" +#include "input.h" static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A }; static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4, diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/input.h index ced535577864..ced535577864 100644 --- a/sound/usb/caiaq/caiaq-input.h +++ b/sound/usb/caiaq/input.h diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/midi.c index f19fd360c936..8fa8cd88d763 100644 --- a/sound/usb/caiaq/caiaq-midi.c +++ b/sound/usb/caiaq/midi.c @@ -16,20 +16,13 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/interrupt.h> #include <linux/usb.h> -#include <linux/input.h> -#include <linux/spinlock.h> -#include <sound/core.h> #include <sound/rawmidi.h> +#include <sound/core.h> #include <sound/pcm.h> -#include "caiaq-device.h" -#include "caiaq-midi.h" - +#include "device.h" +#include "midi.h" static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream) { diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/midi.h index 9d16db027fc3..9d16db027fc3 100644 --- a/sound/usb/caiaq/caiaq-midi.h +++ b/sound/usb/caiaq/midi.h diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 98276aafefe6..012ff1f6f8af 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -349,14 +349,10 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS) return -ENOTTY; - cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); - if (!cfg) - return -ENOMEM; + cfg = memdup_user((void *)arg, sizeof(*cfg)); + if (IS_ERR(cfg)) + return PTR_ERR(cfg); - if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) { - err = -EFAULT; - goto free; - } if (cfg->version != USB_STREAM_INTERFACE_VERSION) { err = -ENXIO; goto free; diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c index 4af8740db717..f3d8f71265dd 100644 --- a/sound/usb/usx2y/usX2Yhwdep.c +++ b/sound/usb/usx2y/usX2Yhwdep.c @@ -203,13 +203,12 @@ static int snd_usX2Y_hwdep_dsp_load(struct snd_hwdep *hw, if (access_ok(VERIFY_READ, dsp->image, dsp->length)) { struct usb_device* dev = priv->chip.dev; - char *buf = kmalloc(dsp->length, GFP_KERNEL); - if (!buf) - return -ENOMEM; - if (copy_from_user(buf, dsp->image, dsp->length)) { - kfree(buf); - return -EFAULT; - } + char *buf; + + buf = memdup_user(dsp->image, dsp->length); + if (IS_ERR(buf)) + return PTR_ERR(buf); + err = usb_set_interface(dev, 0, 1); if (err) snd_printk(KERN_ERR "usb_set_interface error \n"); |