summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/leds-lp3944.txt50
-rw-r--r--Documentation/powerpc/dts-bindings/gpio/led.txt17
-rw-r--r--drivers/leds/Kconfig14
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-alix2.c7
-rw-r--r--drivers/leds/leds-bd2802.c96
-rw-r--r--drivers/leds/leds-gpio.c22
-rw-r--r--drivers/leds/leds-lp3944.c466
-rw-r--r--drivers/leds/leds-pca9532.c58
-rw-r--r--include/linux/leds-lp3944.h53
-rw-r--r--include/linux/leds.h14
11 files changed, 733 insertions, 65 deletions
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 000000000000..c6eda18b15ef
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+ * National Semiconductor LP3944 Fun-light Chip
+ Prefix: 'lp3944'
+ Addresses scanned: None (see the Notes section below)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+ Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+ - period: from 0s to 1.6s
+ - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+ };
+
+and register it in the platform init function
+
+ i2c_register_board_info(0, a910_i2c_board_info,
+ ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14deedc0a..064db928c3c1 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@ LED sub-node properties:
string defining the trigger assigned to the LED. Current triggers are:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
- "default-on" - LED will turn on
+ "default-on" - LED will turn on, but see "default-state" below
"heartbeat" - LED "double" flashes at a load average based rate
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
Examples:
@@ -30,14 +37,22 @@ leds {
gpios = <&mcu_pio 0 1>; /* Active low */
linux,default-trigger = "ide-disk";
};
+
+ fault {
+ gpios = <&mcu_pio 1 0>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ };
};
run-control {
compatible = "gpio-leds";
red {
gpios = <&mpc8572 6 0>;
+ default-state = "off";
};
green {
gpios = <&mpc8572 7 0>;
+ default-state = "on";
};
}
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9b60b6b684d9..7c8e7122aaa9 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -75,6 +75,7 @@ config LEDS_ALIX2
depends on LEDS_CLASS && X86 && EXPERIMENTAL
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+ You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
@@ -145,15 +146,16 @@ config LEDS_GPIO_OF
of_platform devices. For instance, LEDs which are listed in a "dts"
file.
-config LEDS_LP5521
- tristate "LED Support for the LP5521 LEDs"
+config LEDS_LP3944
+ tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C
help
- If you say 'Y' here you get support for the National Semiconductor
- LP5521 LED driver used in n8x0 boards.
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
- This driver can be built as a module by choosing 'M'. The module
- will be called leds-lp5521.
+ To compile this driver as a module, choose M here: the
+ module will be called leds-lp3944.
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2d41c4dcf92f..e8cdcf77a4c3 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index ddbd7730dfc8..731d4eef3425 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -14,7 +14,7 @@
static int force = 0;
module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs");
+MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
struct alix_led {
struct led_classdev cdev;
@@ -155,6 +155,11 @@ static int __init alix_led_init(void)
goto out;
}
+ /* enable output on GPIO for LED 1,2,3 */
+ outl(1 << 6, 0x6104);
+ outl(1 << 9, 0x6184);
+ outl(1 << 11, 0x6184);
+
pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
if (!IS_ERR(pdev)) {
ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 4149ecb3a9b2..779d7f262c04 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@ struct bd2802_led {
enum led_ids led_id;
enum led_colors color;
enum led_bits state;
+
+ /* General attributes of RGB LEDs */
+ int wave_pattern;
+ int rgb_current;
};
@@ -254,7 +258,7 @@ static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
bd2802_reset_cancel(led);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@ static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
- bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+ bd2802_write_byte(led->client, reg, led->rgb_current);
reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
- bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+ bd2802_write_byte(led->client, reg, led->wave_pattern);
bd2802_enable(led, id);
bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@ static void bd2802_enable_adv_conf(struct bd2802_led *led)
ret = device_create_file(&led->client->dev,
bd2802_addr_attributes[i]);
if (ret) {
- dev_err(&led->client->dev, "failed to sysfs file %s\n",
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
bd2802_addr_attributes[i]->attr.name);
goto failed_remove_files;
}
@@ -483,6 +487,52 @@ static struct device_attribute bd2802_adv_conf_attr = {
.store = bd2802_store_adv_conf,
};
+#define BD2802_CONTROL_ATTR(attr_name, name_str) \
+static ssize_t bd2802_show_##attr_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ ssize_t ret; \
+ down_read(&led->rwsem); \
+ ret = sprintf(buf, "0x%02x\n", led->attr_name); \
+ up_read(&led->rwsem); \
+ return ret; \
+} \
+static ssize_t bd2802_store_##attr_name(struct device *dev, \
+ struct device_attribute *attr, const char *buf, size_t count) \
+{ \
+ struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+ unsigned long val; \
+ int ret; \
+ if (!count) \
+ return -EINVAL; \
+ ret = strict_strtoul(buf, 16, &val); \
+ if (ret) \
+ return ret; \
+ down_write(&led->rwsem); \
+ led->attr_name = val; \
+ up_write(&led->rwsem); \
+ return count; \
+} \
+static struct device_attribute bd2802_##attr_name##_attr = { \
+ .attr = { \
+ .name = name_str, \
+ .mode = 0644, \
+ .owner = THIS_MODULE \
+ }, \
+ .show = bd2802_show_##attr_name, \
+ .store = bd2802_store_##attr_name, \
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+ &bd2802_adv_conf_attr,
+ &bd2802_wave_pattern_attr,
+ &bd2802_rgb_current_attr,
+};
+
static void bd2802_led_work(struct work_struct *work)
{
struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -538,7 +588,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
led->cdev_led1r.brightness = LED_OFF;
led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
- led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
if (ret < 0) {
@@ -551,7 +600,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
led->cdev_led1g.brightness = LED_OFF;
led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
- led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
if (ret < 0) {
@@ -564,7 +612,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
led->cdev_led1b.brightness = LED_OFF;
led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
- led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
if (ret < 0) {
@@ -577,7 +624,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
led->cdev_led2r.brightness = LED_OFF;
led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
- led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
if (ret < 0) {
@@ -590,7 +636,6 @@ static int bd2802_register_led_classdev(struct bd2802_led *led)
led->cdev_led2g.brightness = LED_OFF;
led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
- led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
if (ret < 0) {
@@ -640,7 +685,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
{
struct bd2802_led *led;
struct bd2802_led_platform_data *pdata;
- int ret;
+ int ret, i;
led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
if (!led) {
@@ -670,13 +715,20 @@ static int __devinit bd2802_probe(struct i2c_client *client,
/* To save the power, reset BD2802 after detecting */
gpio_set_value(led->pdata->reset_gpio, 0);
+ /* Default attributes */
+ led->wave_pattern = BD2802_PATTERN_HALF;
+ led->rgb_current = BD2802_CURRENT_032;
+
init_rwsem(&led->rwsem);
- ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
- if (ret) {
- dev_err(&client->dev, "failed to create sysfs file %s\n",
- bd2802_adv_conf_attr.attr.name);
- goto failed_free;
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+ ret = device_create_file(&led->client->dev,
+ bd2802_attributes[i]);
+ if (ret) {
+ dev_err(&led->client->dev, "failed: sysfs file %s\n",
+ bd2802_attributes[i]->attr.name);
+ goto failed_unregister_dev_file;
+ }
}
ret = bd2802_register_led_classdev(led);
@@ -686,7 +738,8 @@ static int __devinit bd2802_probe(struct i2c_client *client,
return 0;
failed_unregister_dev_file:
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i--; i >= 0; i--)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
failed_free:
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -697,12 +750,14 @@ failed_free:
static int __exit bd2802_remove(struct i2c_client *client)
{
struct bd2802_led *led = i2c_get_clientdata(client);
+ int i;
- bd2802_unregister_led_classdev(led);
gpio_set_value(led->pdata->reset_gpio, 0);
+ bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
- device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+ for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+ device_remove_file(&led->client->dev, bd2802_attributes[i]);
i2c_set_clientdata(client, NULL);
kfree(led);
@@ -723,8 +778,7 @@ static int bd2802_resume(struct i2c_client *client)
struct bd2802_led *led = i2c_get_clientdata(client);
if (!bd2802_is_all_off(led) || led->adf_on) {
- gpio_set_value(led->pdata->reset_gpio, 1);
- udelay(100);
+ bd2802_reset_cancel(led);
bd2802_restore_state(led);
}
@@ -762,4 +816,4 @@ module_exit(bd2802_exit);
MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
MODULE_DESCRIPTION("BD2802 LED driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d2109054de85..6b06638eb5b4 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -76,7 +76,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
struct gpio_led_data *led_dat, struct device *parent,
int (*blink_set)(unsigned, unsigned long *, unsigned long *))
{
- int ret;
+ int ret, state;
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
@@ -99,11 +99,15 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
led_dat->cdev.blink_set = gpio_blink_set;
}
led_dat->cdev.brightness_set = gpio_led_set;
- led_dat->cdev.brightness = LED_OFF;
+ if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+ state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+ else
+ state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+ led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+ ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
if (ret < 0)
goto err;
@@ -129,7 +133,7 @@ static void delete_gpio_led(struct gpio_led_data *led)
}
#ifdef CONFIG_LEDS_GPIO_PLATFORM
-static int gpio_led_probe(struct platform_device *pdev)
+static int __devinit gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
struct gpio_led_data *leds_data;
@@ -223,12 +227,22 @@ static int __devinit of_gpio_leds_probe(struct of_device *ofdev,
memset(&led, 0, sizeof(led));
for_each_child_of_node(np, child) {
enum of_gpio_flags flags;
+ const char *state;
led.gpio = of_get_gpio_flags(child, 0, &flags);
led.active_low = flags & OF_GPIO_ACTIVE_LOW;
led.name = of_get_property(child, "label", NULL) ? : child->name;
led.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
+ state = of_get_property(child, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep"))
+ led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+ else if(!strcmp(state, "on"))
+ led.default_state = LEDS_GPIO_DEFSTATE_ON;
+ else
+ led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+ }
ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
&ofdev->dev, NULL);
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 000000000000..5946208ba26e
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,466 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ * - period: from 0s to 1.6s
+ * - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1 0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1 0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0 0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0 0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1 0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1 0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0 0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1 0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8 0x08
+#define LP3944_REG_REGISTER9 0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c) container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+ u8 id;
+ enum lp3944_type type;
+ enum lp3944_status status;
+ struct led_classdev ldev;
+ struct i2c_client *client;
+ struct work_struct work;
+};
+
+struct lp3944_data {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+ int tmp;
+
+ tmp = i2c_smbus_read_byte_data(client, reg);
+ if (tmp < 0)
+ return -EINVAL;
+
+ *value = tmp;
+
+ return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+ u8 psc_reg;
+ u8 psc_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ psc_reg = LP3944_REG_PSC0;
+ else if (dim == LP3944_DIM1)
+ psc_reg = LP3944_REG_PSC1;
+ else
+ return -EINVAL;
+
+ /* Convert period to Prescaler value */
+ if (period > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+ err = lp3944_reg_write(client, psc_reg, psc_value);
+
+ return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+ u8 duty_cycle)
+{
+ u8 pwm_reg;
+ u8 pwm_value;
+ int err;
+
+ if (dim == LP3944_DIM0)
+ pwm_reg = LP3944_REG_PWM0;
+ else if (dim == LP3944_DIM1)
+ pwm_reg = LP3944_REG_PWM1;
+ else
+ return -EINVAL;
+
+ /* Convert duty cycle to PWM value */
+ if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+ return -EINVAL;
+
+ pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+ err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+ return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ * LP3944_LED_STATUS_ON
+ * LP3944_LED_STATUS_DIM0
+ * LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+ struct lp3944_data *data = i2c_get_clientdata(led->client);
+ u8 id = led->id;
+ u8 reg;
+ u8 val = 0;
+ int err;
+
+ dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+ __func__, led->ldev.name, status);
+
+ switch (id) {
+ case LP3944_LED0:
+ case LP3944_LED1:
+ case LP3944_LED2:
+ case LP3944_LED3:
+ reg = LP3944_REG_LS0;
+ break;
+ case LP3944_LED4:
+ case LP3944_LED5:
+ case LP3944_LED6:
+ case LP3944_LED7:
+ id -= LP3944_LED4;
+ reg = LP3944_REG_LS1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (status > LP3944_LED_STATUS_DIM1)
+ return -EINVAL;
+
+ /* invert only 0 and 1, leave unchanged the other values,
+ * remember we are abusing status to set blink patterns
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+ status = 1 - status;
+
+ mutex_lock(&data->lock);
+ lp3944_reg_read(led->client, reg, &val);
+
+ val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+ val |= (status << (id << 1));
+
+ dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+ __func__, led->ldev.name, reg, id, status, val);
+
+ /* set led status */
+ err = lp3944_reg_write(led->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+ u16 period;
+ u8 duty_cycle;
+ int err;
+
+ /* units are in ms */
+ if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* Special case: the leds subsystem requires a default user
+ * friendly blink pattern for the LED. Let's blink the led
+ * slowly (1Hz).
+ */
+ *delay_on = 500;
+ *delay_off = 500;
+ }
+
+ period = (*delay_on) + (*delay_off);
+
+ /* duty_cycle is the percentage of period during which the led is ON */
+ duty_cycle = 100 * (*delay_on) / period;
+
+ /* invert duty cycle for inverted leds, this has the same effect of
+ * swapping delay_on and delay_off
+ */
+ if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+ duty_cycle = 100 - duty_cycle;
+
+ /* NOTE: using always the first DIM mode, this means that all leds
+ * will have the same blinking pattern.
+ *
+ * We could find a way later to have two leds blinking in hardware
+ * with different patterns at the same time, falling back to software
+ * control for the other ones.
+ */
+ err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+ if (err)
+ return err;
+
+ err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+ if (err)
+ return err;
+
+ dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+ __func__);
+
+ led->status = LP3944_LED_STATUS_DIM0;
+ schedule_work(&led->work);
+
+ return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+ dev_dbg(&led->client->dev, "%s: %s, %d\n",
+ __func__, led_cdev->name, brightness);
+
+ led->status = brightness;
+ schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+ struct lp3944_led_data *led;
+
+ led = container_of(work, struct lp3944_led_data, work);
+ lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+ struct lp3944_data *data,
+ struct lp3944_platform_data *pdata)
+{
+ int i, err = 0;
+
+ for (i = 0; i < pdata->leds_size; i++) {
+ struct lp3944_led *pled = &pdata->leds[i];
+ struct lp3944_led_data *led = &data->leds[i];
+ led->client = client;
+ led->id = i;
+
+ switch (pled->type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led->type = pled->type;
+ led->status = pled->status;
+ led->ldev.name = pled->name;
+ led->ldev.max_brightness = 1;
+ led->ldev.brightness_set = lp3944_led_set_brightness;
+ led->ldev.blink_set = lp3944_led_set_blink;
+ led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+ INIT_WORK(&led->work, lp3944_led_work);
+ err = led_classdev_register(&client->dev, &led->ldev);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "couldn't register LED %s\n",
+ led->ldev.name);
+ goto exit;
+ }
+
+ /* to expose the default value to userspace */
+ led->ldev.brightness = led->status;
+
+ /* Set the default led status */
+ err = lp3944_led_set(led, led->status);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "%s couldn't set STATUS %d\n",
+ led->ldev.name, led->status);
+ goto exit;
+ }
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+
+ }
+ }
+ return 0;
+
+exit:
+ if (i > 0)
+ for (i = i - 1; i >= 0; i--)
+ switch (pdata->leds[i].type) {
+
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ return err;
+}
+
+static int __devinit lp3944_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
+ struct lp3944_data *data;
+
+ if (lp3944_pdata == NULL) {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ /* Let's see whether this adapter can support what we need. */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "insufficient functionality!\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ dev_info(&client->dev, "lp3944 enabled\n");
+
+ lp3944_configure(client, data, lp3944_pdata);
+ return 0;
+}
+
+static int __devexit lp3944_remove(struct i2c_client *client)
+{
+ struct lp3944_platform_data *pdata = client->dev.platform_data;
+ struct lp3944_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->leds_size; i++)
+ switch (data->leds[i].type) {
+ case LP3944_LED_TYPE_LED:
+ case LP3944_LED_TYPE_LED_INVERTED:
+ led_classdev_unregister(&data->leds[i].ldev);
+ cancel_work_sync(&data->leds[i].work);
+ break;
+
+ case LP3944_LED_TYPE_NONE:
+ default:
+ break;
+ }
+
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+ {"lp3944", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+ .driver = {
+ .name = "lp3944",
+ },
+ .probe = lp3944_probe,
+ .remove = __devexit_p(lp3944_remove),
+ .id_table = lp3944_id,
+};
+
+static int __init lp3944_module_init(void)
+{
+ return i2c_add_driver(&lp3944_driver);
+}
+
+static void __exit lp3944_module_exit(void)
+{
+ i2c_del_driver(&lp3944_driver);
+}
+
+module_init(lp3944_module_init);
+module_exit(lp3944_module_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 3937244fdcab..dba8921240f2 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -35,7 +35,7 @@ struct pca9532_data {
struct pca9532_led leds[16];
struct mutex update_lock;
struct input_dev *idev;
- struct work_struct work;
+ struct work_struct work;
u8 pwm[2];
u8 psc[2];
};
@@ -87,14 +87,14 @@ static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
if (b > 0xFF)
return -EINVAL;
data->pwm[pwm] = b;
- data->psc[pwm] = blink;
- return 0;
+ data->psc[pwm] = blink;
+ return 0;
}
static int pca9532_setpwm(struct i2c_client *client, int pwm)
{
- struct pca9532_data *data = i2c_get_clientdata(client);
- mutex_lock(&data->update_lock);
+ struct pca9532_data *data = i2c_get_clientdata(client);
+ mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
data->pwm[pwm]);
i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
@@ -132,11 +132,11 @@ static void pca9532_set_brightness(struct led_classdev *led_cdev,
led->state = PCA9532_ON;
else {
led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
- err = pca9532_calcpwm(led->client, 0, 0, value);
+ err = pca9532_calcpwm(led->client, 0, 0, value);
if (err)
return; /* XXX: led api doesn't allow error code? */
}
- schedule_work(&led->work);
+ schedule_work(&led->work);
}
static int pca9532_set_blink(struct led_classdev *led_cdev,
@@ -145,7 +145,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
struct pca9532_led *led = ldev_to_led(led_cdev);
struct i2c_client *client = led->client;
int psc;
- int err = 0;
+ int err = 0;
if (*delay_on == 0 && *delay_off == 0) {
/* led subsystem ask us for a blink rate */
@@ -157,11 +157,11 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
/* Thecus specific: only use PSC/PWM 0 */
psc = (*delay_on * 152-1)/1000;
- err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
- if (err)
- return err;
- schedule_work(&led->work);
- return 0;
+ err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+ if (err)
+ return err;
+ schedule_work(&led->work);
+ return 0;
}
static int pca9532_event(struct input_dev *dev, unsigned int type,
@@ -178,15 +178,15 @@ static int pca9532_event(struct input_dev *dev, unsigned int type,
else
data->pwm[1] = 0;
- schedule_work(&data->work);
+ schedule_work(&data->work);
- return 0;
+ return 0;
}
static void pca9532_input_work(struct work_struct *work)
{
- struct pca9532_data *data;
- data = container_of(work, struct pca9532_data, work);
+ struct pca9532_data *data;
+ data = container_of(work, struct pca9532_data, work);
mutex_lock(&data->update_lock);
i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
data->pwm[1]);
@@ -195,11 +195,11 @@ static void pca9532_input_work(struct work_struct *work)
static void pca9532_led_work(struct work_struct *work)
{
- struct pca9532_led *led;
- led = container_of(work, struct pca9532_led, work);
- if (led->state == PCA9532_PWM0)
- pca9532_setpwm(led->client, 0);
- pca9532_setled(led);
+ struct pca9532_led *led;
+ led = container_of(work, struct pca9532_led, work);
+ if (led->state == PCA9532_PWM0)
+ pca9532_setpwm(led->client, 0);
+ pca9532_setled(led);
}
static int pca9532_configure(struct i2c_client *client,
@@ -232,7 +232,7 @@ static int pca9532_configure(struct i2c_client *client,
led->ldev.brightness = LED_OFF;
led->ldev.brightness_set = pca9532_set_brightness;
led->ldev.blink_set = pca9532_set_blink;
- INIT_WORK(&led->work, pca9532_led_work);
+ INIT_WORK(&led->work, pca9532_led_work);
err = led_classdev_register(&client->dev, &led->ldev);
if (err < 0) {
dev_err(&client->dev,
@@ -262,11 +262,11 @@ static int pca9532_configure(struct i2c_client *client,
BIT_MASK(SND_TONE);
data->idev->event = pca9532_event;
input_set_drvdata(data->idev, data);
- INIT_WORK(&data->work, pca9532_input_work);
+ INIT_WORK(&data->work, pca9532_input_work);
err = input_register_device(data->idev);
if (err) {
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
goto exit;
}
@@ -283,13 +283,13 @@ exit:
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
@@ -340,13 +340,13 @@ static int pca9532_remove(struct i2c_client *client)
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
- cancel_work_sync(&data->leds[i].work);
+ cancel_work_sync(&data->leds[i].work);
break;
case PCA9532_TYPE_N2100_BEEP:
if (data->idev != NULL) {
input_unregister_device(data->idev);
input_free_device(data->idev);
- cancel_work_sync(&data->work);
+ cancel_work_sync(&data->work);
data->idev = NULL;
}
break;
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 000000000000..afc9f9fd70f5
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,53 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK 0x03
+enum lp3944_status {
+ LP3944_LED_STATUS_OFF = 0x0,
+ LP3944_LED_STATUS_ON = 0x1,
+ LP3944_LED_STATUS_DIM0 = 0x2,
+ LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+ LP3944_LED_TYPE_NONE,
+ LP3944_LED_TYPE_LED,
+ LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+ char *name;
+ enum lp3944_type type;
+ enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+ struct lp3944_led leds[LP3944_LEDS_MAX];
+ u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 376fe07732ea..d8bf9665e70c 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -45,7 +45,10 @@ struct led_classdev {
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
- /* Activate hardware accelerated blink */
+ /* Activate hardware accelerated blink, delays are in
+ * miliseconds and if none is provided then a sensible default
+ * should be chosen. The call can adjust the timings if it can't
+ * match the values specified exactly. */
int (*blink_set)(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off);
@@ -141,9 +144,14 @@ struct gpio_led {
const char *name;
const char *default_trigger;
unsigned gpio;
- u8 active_low : 1;
- u8 retain_state_suspended : 1;
+ unsigned active_low : 1;
+ unsigned retain_state_suspended : 1;
+ unsigned default_state : 2;
+ /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
};
+#define LEDS_GPIO_DEFSTATE_OFF 0
+#define LEDS_GPIO_DEFSTATE_ON 1
+#define LEDS_GPIO_DEFSTATE_KEEP 2
struct gpio_led_platform_data {
int num_leds;