summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-omap1/board-fsample.c12
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c12
-rw-r--r--arch/arm/mach-omap1/clock.c2
-rw-r--r--arch/arm/mach-omap1/io.c12
-rw-r--r--arch/arm/plat-omap/include/mach/hardware.h2
-rw-r--r--arch/arm/plat-omap/include/mach/mux.h14
-rw-r--r--arch/arm/plat-omap/io.c12
7 files changed, 33 insertions, 33 deletions
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b93226..e53f7748ac13 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
/*
* Hold GSM Reset until needed
*/
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
*/
/* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f310..ec22838e8e79 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
/*
* Hold GSM Reset until needed
*/
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
*/
/* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fcbea61cb8ca..c24cc28238f9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
- omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
#endif
/* Amstrad Delta wants BCLK high when inactive */
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 19de57f74e84..157d5082ffea 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = {
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct map_desc omap730_io_desc[] __initdata = {
{
- .virtual = OMAP730_DSP_BASE,
- .pfn = __phys_to_pfn(OMAP730_DSP_START),
- .length = OMAP730_DSP_SIZE,
+ .virtual = OMAP7XX_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP7XX_DSP_START),
+ .length = OMAP7XX_DSP_SIZE,
.type = MT_DEVICE
}, {
- .virtual = OMAP730_DSPREG_BASE,
- .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
- .length = OMAP730_DSPREG_SIZE,
+ .virtual = OMAP7XX_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
+ .length = OMAP7XX_DSPREG_SIZE,
.type = MT_DEVICE
}
};
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 26c1fbff08aa..99c42412c0a1 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -280,7 +280,7 @@
* ---------------------------------------------------------------------------
*/
-#include "omap730.h"
+#include "omap7xx.h"
#include "omap1510.h"
#include "omap16xx.h"
#include "omap24xx.h"
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 587fb63d2323..66ae302f0c0f 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -51,13 +51,13 @@
.pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
- .mux_reg = OMAP730_IO_CONF_##reg, \
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
-#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
- .pull_reg = OMAP730_IO_CONF_##reg, \
+#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+ .pull_reg = OMAP7XX_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
@@ -75,11 +75,11 @@
.pu_pd_val = status,
#define MUX_REG_730(reg, mode_offset, mode) \
- .mux_reg = OMAP730_IO_CONF_##reg, \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
.mask_offset = mode_offset, \
.mask = mode,
-#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
+#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
.pull_bit = bit, \
.pull_val = status,
@@ -99,7 +99,7 @@
/*
* OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
* as mux config
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 388fd9490939..23a205f4a2b1 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/mm.h>
-#include <mach/omap730.h>
+#include <mach/omap7xx.h>
#include <mach/omap1510.h>
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
@@ -34,12 +34,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
}
if (cpu_is_omap7xx()) {
- if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
- return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+ if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+ return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
- if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
- return XLATE(p, OMAP730_DSPREG_BASE,
- OMAP730_DSPREG_START);
+ if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+ return XLATE(p, OMAP7XX_DSPREG_BASE,
+ OMAP7XX_DSPREG_START);
}
if (cpu_is_omap15xx()) {
if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-12 22:26:03 +0000