summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/dvb/lmedm04.txt9
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig1
-rw-r--r--drivers/media/dvb/dvb-usb/lmedm04.c292
-rw-r--r--drivers/media/dvb/dvb-usb/lmedm04.h44
4 files changed, 243 insertions, 103 deletions
diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt
index 4bde457fafc4..e175784b89bf 100644
--- a/Documentation/dvb/lmedm04.txt
+++ b/Documentation/dvb/lmedm04.txt
@@ -45,10 +45,13 @@ and run
Other LG firmware can be extracted manually from US280D.sys
only found in windows/system32/driver.
-However, this firmware does not run very well under Windows
-or with the Linux driver.
-dd if=US280D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-lg.fw
+dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw
+
+for DM04 LME2510C (LG Tuner)
+---------------------------
+
+dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
---------------------------------------------------------------------
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index ce60c1e46e15..2525d3b3c88d 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -356,6 +356,5 @@ config DVB_USB_LME2510
select DVB_TDA826X if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_IX2505V if !DVB_FE_CUSTOMISE
- depends on IR_CORE
help
Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d5374ac075d3..d939fbbf9fe6 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -1,14 +1,17 @@
/* DVB USB compliant linux driver for
*
* DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
- * LME2510 + LGTDQT-P001F
+ * LME2510C + LG TDQY-P001F
+ * LME2510 + LG TDQY-P001F
*
* MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
* SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
*
- * MV001F (LME2510 +LGTDQY-P001F)
+ * MV001F (LME2510+LGTDQY-P001F)
* LG TDQY - P001F =(TDA8263 + TDA10086H)
*
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
* For firmware see Documentation/dvb/lmedm04.txt
*
* I2C addresses:
@@ -21,7 +24,6 @@
* ***Please Note***
* There are other variants of the DM04
* ***NOT SUPPORTED***
- * MVB0001F (LME2510C+LGTDQT-P001F)
* MV0194 (LME2510+SHARP0194)
* MVB0194 (LME2510C+SHARP0194)
*
@@ -51,10 +53,7 @@
* LME2510: Non Intel USB chipsets fail to maintain High Speed on
* Boot or Hot Plug.
*
- * DiSEqC functions are not fully supported in this driver. The main
- * reason is the frontend is cut off during streaming. Allowing frontend
- * access will stall the driver. Applications that attempt to this, the
- * commands are ignored.
+ * QQbox suffers from noise on LNB voltage.
*
* PID functions have been removed from this driver version due to
* problems with different firmware and application versions.
@@ -91,9 +90,14 @@ module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
DVB_USB_DEBUG_STATUS);
+static int dvb_usb_lme2510_firmware;
+module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
+MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
+
+
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-#define TUNER_LG 0x1
-#define TUNER_S7395 0x2
+#define TUNER_LG 0x1
+#define TUNER_S7395 0x2
struct lme2510_state {
u8 id;
@@ -107,6 +111,8 @@ struct lme2510_state {
u8 i2c_tuner_gate_w;
u8 i2c_tuner_gate_r;
u8 i2c_tuner_addr;
+ u8 stream_on;
+ u8 one_tune;
void *buffer;
struct urb *lme_urb;
void *usb_buffer;
@@ -117,6 +123,7 @@ static int lme2510_bulk_write(struct usb_device *dev,
u8 *snd, int len, u8 pipe)
{
int ret, actual_l;
+
ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
snd, len , &actual_l, 500);
return ret;
@@ -151,22 +158,21 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
/* the read/write capped at 512 */
memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);
-
ret = mutex_lock_interruptible(&d->usb_mutex);
if (ret < 0)
return -EAGAIN;
ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01));
- msleep(5);
- ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x1);
- msleep(5);
- ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x1));
+ ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
+
+ msleep(12);
+
+ ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01));
- msleep(5);
ret |= lme2510_bulk_read(d->udev, buff, (rlen > 512) ?
- 512 : rlen , 0x1);
+ 512 : rlen , 0x01);
if (rlen > 0)
memcpy(rbuf, buff, rlen);
@@ -176,6 +182,18 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
return (ret < 0) ? -ENODEV : 0;
}
+static int lme2510_usb_talk_restart(struct dvb_usb_device *d,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen) {
+ static u8 stream_on[] = LME_ST_ON_W;
+ int ret;
+ u8 rbuff[10];
+ /*Send Normal Command*/
+ ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+ /*Restart Stream Command*/
+ ret |= lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+ rbuff, sizeof(rbuff));
+ return ret;
+}
static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
{
struct dvb_usb_device *d = adap->dev;
@@ -213,7 +231,6 @@ static void lme2510_int_response(struct urb *lme_urb)
offset = ((lme_urb->actual_length/8) > 4)
? 4 : (lme_urb->actual_length/8) ;
-
for (i = 0; i < offset; ++i) {
ibuf = (u8 *)&rbuf[i*8];
deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
@@ -228,7 +245,8 @@ static void lme2510_int_response(struct urb *lme_urb)
case 0xbb:
switch (st->tuner_config) {
case TUNER_LG:
- st->signal_lock = ibuf[2];
+ if (ibuf[2] > 0)
+ st->signal_lock = ibuf[2];
st->signal_level = ibuf[4];
st->signal_sn = ibuf[3];
st->time_key = ibuf[7];
@@ -237,7 +255,7 @@ static void lme2510_int_response(struct urb *lme_urb)
/* Tweak for earlier firmware*/
if (ibuf[1] == 0x03) {
st->signal_level = ibuf[3];
- st->signal_sn = ibuf[2];
+ st->signal_sn = ibuf[4];
} else {
st->signal_level = ibuf[4];
st->signal_sn = ibuf[5];
@@ -295,6 +313,7 @@ static int lme2510_return_status(struct usb_device *dev)
{
int ret = 0;
u8 data[10] = {0};
+
ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
info("Firmware Status: %x (%x)", ret , data[2]);
@@ -308,25 +327,48 @@ static int lme2510_msg(struct dvb_usb_device *d,
int ret = 0;
struct lme2510_state *st = d->priv;
- if (st->i2c_talk_onoff == 1) {
- if ((wbuf[2] == 0x1c) & (wbuf[3] == 0x0e))
- msleep(80); /*take your time when waiting for tune*/
-
- if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
+ if (st->i2c_talk_onoff == 1) {
+
ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
- mutex_unlock(&d->i2c_mutex);
switch (st->tuner_config) {
+ case TUNER_LG:
+ if (wbuf[2] == 0x1c) {
+ if (wbuf[3] == 0x0e) {
+ st->signal_lock = rbuf[1];
+ if ((st->stream_on & 1) &&
+ (st->signal_lock & 0x10)) {
+ lme2510_usb_talk_restart(d,
+ wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 0;
+ }
+ msleep(80);
+ }
+ }
+ break;
case TUNER_S7395:
- if (wbuf[3] == 0x24)
- st->signal_lock = rbuf[1];
+ if (wbuf[2] == 0xd0) {
+ if (wbuf[3] == 0x24) {
+ st->signal_lock = rbuf[1];
+ if ((st->stream_on & 1) &&
+ (st->signal_lock & 0x8)) {
+ lme2510_usb_talk_restart(d,
+ wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 0;
+ }
+ }
+ if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5))
+ msleep(5);
+
+
+ }
break;
default:
break;
}
-
} else {
switch (st->tuner_config) {
case TUNER_LG:
@@ -343,6 +385,17 @@ static int lme2510_msg(struct dvb_usb_device *d,
rbuf[0] = 0x55;
rbuf[1] = st->signal_sn;
break;
+ /*DiSEqC functions as per TDA10086*/
+ case 0x36:
+ case 0x48:
+ case 0x49:
+ case 0x4a:
+ case 0x4b:
+ case 0x4c:
+ case 0x4d:
+ if (wbuf[2] == 0x1c)
+ lme2510_usb_talk_restart(d,
+ wbuf, wlen, rbuf, rlen);
default:
break;
}
@@ -362,7 +415,31 @@ static int lme2510_msg(struct dvb_usb_device *d,
rbuf[0] = 0x55;
rbuf[1] = (st->signal_level & 0x80)
? 0 : st->signal_lock;
+ break;
+ case 0x6:
+ if (wbuf[2] == 0xd0)
+ lme2510_usb_talk(d,
+ wbuf, wlen, rbuf, rlen);
+ break;
+ case 0x1:
+ if (st->one_tune > 0)
+ break;
+ st->one_tune++;
+ st->i2c_talk_onoff = 1;
+ /*DiSEqC functions as per STV0288*/
+ case 0x5:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ case 0xa:
+ case 0xb:
+ if (wbuf[2] == 0xd0)
+ lme2510_usb_talk_restart(d,
+ wbuf, wlen, rbuf, rlen);
+ break;
default:
+ rbuf[0] = 0x55;
+ rbuf[1] = 0x00;
break;
}
break;
@@ -376,6 +453,8 @@ static int lme2510_msg(struct dvb_usb_device *d,
}
+ mutex_unlock(&d->i2c_mutex);
+
return ret;
}
@@ -469,29 +548,34 @@ static int lme2510_identify_state(struct usb_device *udev,
static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
struct lme2510_state *st = adap->dev->priv;
- static u8 reset[] = LME_RESET;
static u8 stream_on[] = LME_ST_ON_W;
static u8 clear_reg_3[] = LME_CLEAR_PID;
static u8 rbuf[1];
+ static u8 timeout;
int ret = 0, len = 2, rlen = sizeof(rbuf);
deb_info(1, "STM (%02x)", onoff);
if (onoff == 1) {
st->i2c_talk_onoff = 0;
- msleep(400); /* give enough time for i2c to stop */
+ timeout = 0;
+ /* wait for i2C to be free */
+ while (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) {
+ timeout++;
+ if (timeout > 5)
+ return -ENODEV;
+ }
+ msleep(100);
ret |= lme2510_usb_talk(adap->dev,
stream_on, len, rbuf, rlen);
+ st->stream_on = 1;
+ st->one_tune = 0;
+ mutex_unlock(&adap->dev->i2c_mutex);
} else {
deb_info(1, "STM Steam Off");
- if (st->tuner_config == TUNER_LG)
- ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
+ ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
sizeof(clear_reg_3), rbuf, rlen);
- else
- ret |= lme2510_usb_talk(adap->dev,
- reset, sizeof(reset), rbuf, rlen);
-
- msleep(400);
+ st->stream_on = 0;
st->i2c_talk_onoff = 1;
}
@@ -604,6 +688,63 @@ static int lme2510_download_firmware(struct usb_device *dev,
return (ret < 0) ? -ENODEV : 0;
}
+/* Default firmware for LME2510C */
+const char lme_firmware[50] = "dvb-usb-lme2510c-s7395.fw";
+
+static void lme_coldreset(struct usb_device *dev)
+{
+ int ret = 0, len_in;
+ u8 data[512] = {0};
+
+ data[0] = 0x0a;
+ len_in = 1;
+ info("FRM Firmware Cold Reset");
+ ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/
+ ret |= lme2510_bulk_read(dev, data, len_in, 1);
+ return;
+}
+
+static void lme_firmware_switch(struct usb_device *udev, int cold)
+{
+ const struct firmware *fw = NULL;
+ char lme2510c_s7395[] = "dvb-usb-lme2510c-s7395.fw";
+ char lme2510c_lg[] = "dvb-usb-lme2510c-lg.fw";
+ char *firm_msg[] = {"Loading", "Switching to"};
+ int ret;
+
+ if (udev->descriptor.idProduct == 0x1122)
+ return;
+
+ switch (dvb_usb_lme2510_firmware) {
+ case 0:
+ default:
+ memcpy(&lme_firmware, lme2510c_s7395, sizeof(lme2510c_s7395));
+ ret = request_firmware(&fw, lme_firmware, &udev->dev);
+ if (ret == 0) {
+ info("FRM %s S7395 Firmware", firm_msg[cold]);
+ break;
+ }
+ if (cold == 0)
+ dvb_usb_lme2510_firmware = 1;
+ else
+ cold = 0;
+ case 1:
+ memcpy(&lme_firmware, lme2510c_lg, sizeof(lme2510c_lg));
+ ret = request_firmware(&fw, lme_firmware, &udev->dev);
+ if (ret == 0) {
+ info("FRM %s LG Firmware", firm_msg[cold]);
+ break;
+ }
+ info("FRM No Firmware Found - please install");
+ dvb_usb_lme2510_firmware = 0;
+ cold = 0;
+ break;
+ }
+ release_firmware(fw);
+ if (cold)
+ lme_coldreset(udev);
+ return;
+}
static int lme2510_kill_urb(struct usb_data_stream *stream)
{
@@ -638,7 +779,6 @@ static struct ix2505v_config lme_tuner = {
.tuner_chargepump = 0x3,
};
-
static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage)
{
@@ -646,35 +786,28 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
struct lme2510_state *st = adap->dev->priv;
static u8 voltage_low[] = LME_VOLTAGE_L;
static u8 voltage_high[] = LME_VOLTAGE_H;
- static u8 reset[] = LME_RESET;
- static u8 clear_reg_3[] = LME_CLEAR_PID;
+ static u8 lnb_on[] = LNB_ON;
+ static u8 lnb_off[] = LNB_OFF;
static u8 rbuf[1];
int ret = 0, len = 3, rlen = 1;
- msleep(100);
-
- if (st->tuner_config == TUNER_LG)
- ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
- sizeof(clear_reg_3), rbuf, rlen);
- else
- ret |= lme2510_usb_talk(adap->dev,
- reset, sizeof(reset), rbuf, rlen);
-
- /*always check & stop streaming*/
- lme2510_kill_urb(&adap->stream);
- adap->feedcount = 0;
+ if (st->stream_on == 1)
+ return 0;
- switch (voltage) {
+ ret |= lme2510_usb_talk(adap->dev, lnb_on, len, rbuf, rlen);
- case SEC_VOLTAGE_18:
- ret |= lme2510_usb_talk(adap->dev,
- voltage_high, len, rbuf, rlen);
+ switch (voltage) {
+ case SEC_VOLTAGE_18:
+ ret |= lme2510_usb_talk(adap->dev,
+ voltage_high, len, rbuf, rlen);
break;
- case SEC_VOLTAGE_OFF:
- case SEC_VOLTAGE_13:
- default:
- ret |= lme2510_usb_talk(adap->dev,
+ case SEC_VOLTAGE_OFF:
+ ret |= lme2510_usb_talk(adap->dev,
+ lnb_off, len, rbuf, rlen);
+ case SEC_VOLTAGE_13:
+ default:
+ ret |= lme2510_usb_talk(adap->dev,
voltage_low, len, rbuf, rlen);
break;
@@ -714,6 +847,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
&adap->dev->i2c_adap, 1)) {
info("TUN TDA8263 Found");
st->tuner_config = TUNER_LG;
+ if (dvb_usb_lme2510_firmware != 1) {
+ dvb_usb_lme2510_firmware = 1;
+ lme_firmware_switch(adap->dev->udev, 1);
+ }
return 0;
}
kfree(adap->fe);
@@ -735,6 +872,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
&adap->dev->i2c_adap)) {
st->tuner_config = TUNER_S7395;
info("TUN Sharp IX2505V silicon tuner");
+ if (dvb_usb_lme2510_firmware != 0) {
+ dvb_usb_lme2510_firmware = 0;
+ lme_firmware_switch(adap->dev->udev, 1);
+ }
return 0;
}
kfree(adap->fe);
@@ -772,6 +913,8 @@ static int lme2510_probe(struct usb_interface *intf,
return -ENODEV;
}
+ lme_firmware_switch(udev, 0);
+
if (0 == dvb_usb_device_init(intf, &lme2510_properties,
THIS_MODULE, NULL, adapter_nr)) {
info("DEV registering device driver");
@@ -839,7 +982,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = lme2510_download_firmware,
- .firmware = "dvb-usb-lme2510c-s7395.fw",
+ .firmware = lme_firmware,
.size_of_priv = sizeof(struct lme2510_state),
.num_adapters = 1,
.adapter = {
@@ -849,7 +992,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 8,
+ .count = 10,
.endpoint = 0x8,
.u = {
.bulk = {
@@ -872,15 +1015,23 @@ static struct dvb_usb_device_properties lme2510c_properties = {
}
};
-void lme2510_exit_int(struct dvb_usb_device *d)
+void *lme2510_exit_int(struct dvb_usb_device *d)
{
struct lme2510_state *st = d->priv;
+ struct dvb_usb_adapter *adap = &d->adapter[0];
+ void *buffer = NULL;
+
+ if (adap != NULL) {
+ lme2510_kill_urb(&adap->stream);
+ adap->feedcount = 0;
+ }
+
if (st->lme_urb != NULL) {
- st->i2c_talk_onoff = 0;
+ st->i2c_talk_onoff = 1;
st->signal_lock = 0;
st->signal_level = 0;
st->signal_sn = 0;
- kfree(st->usb_buffer);
+ buffer = st->usb_buffer;
usb_kill_urb(st->lme_urb);
usb_free_coherent(d->udev, 5000, st->buffer,
st->lme_urb->transfer_dma);
@@ -888,18 +1039,19 @@ void lme2510_exit_int(struct dvb_usb_device *d)
ir_input_unregister(d->rc_input_dev);
info("Remote Stopped");
}
- return;
+ return buffer;
}
void lme2510_exit(struct usb_interface *intf)
{
struct dvb_usb_device *d = usb_get_intfdata(intf);
+ void *usb_buffer;
+
if (d != NULL) {
- d->adapter[0].feedcount = 0;
- lme2510_exit_int(d);
+ usb_buffer = lme2510_exit_int(d);
dvb_usb_device_exit(intf);
+ kfree(usb_buffer);
}
-
}
static struct usb_driver lme2510_driver = {
@@ -932,5 +1084,5 @@ module_exit(lme2510_module_exit);
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.4");
+MODULE_VERSION("1.60");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.h b/drivers/media/dvb/dvb-usb/lmedm04.h
index 5a66c7ec4511..e6af16c1e3e5 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.h
+++ b/drivers/media/dvb/dvb-usb/lmedm04.h
@@ -1,14 +1,16 @@
/* DVB USB compliant linux driver for
*
* DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
- * LME2510C + LGTDQT-P001F
+ * LME2510C + LG TDQY-P001F
+ * LME2510 + LG TDQY-P001F
*
* MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
* SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
*
- * MVB0001F (LME2510C+LGTDQT-P001F)
+ * MVB001F (LME2510+LGTDQT-P001F)
* LG TDQY - P001F =(TDA8263 + TDA10086H)
*
+ * MVB0001F (LME2510C+LGTDQT-P001F)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -35,35 +37,33 @@
* end byte -1 = 20
* end byte = clear pid always a0, other wise 9c, 9a ??
*
- * RESET (also clears PID filter)
- * 3a 01 00
*/
#define LME_ST_ON_W {0x06, 0x00}
-#define LME_RESET {0x3a, 0x01, 0x00}
#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0}
-
-/* LME Power Control
+/* LNB Voltage
* 07 XX XX
- * offset 1 = 01 Power? my device cannot be powered down
+ * offset 1 = 01
* offset 2 = 00=Voltage low 01=Voltage high
+ *
+ * LNB Power
+ * 03 01 XX
+ * offset 2 = 00=ON 01=OFF
*/
#define LME_VOLTAGE_L {0x07, 0x01, 0x00}
#define LME_VOLTAGE_H {0x07, 0x01, 0x01}
-
+#define LNB_ON {0x3a, 0x01, 0x00}
+#define LNB_OFF {0x3a, 0x01, 0x01}
/* Initial stv0288 settings for 7395 Frontend */
static u8 s7395_inittab[] = {
- 0x00, 0x11,
0x01, 0x15,
0x02, 0x20,
- 0x03, 0x8e,
- 0x04, 0x8e,
+ 0x03, 0xa0,
+ 0x04, 0xa0,
0x05, 0x12,
- 0x06, 0xff,
- 0x07, 0x20,
- 0x08, 0x00,
+ 0x06, 0x00,
0x09, 0x00,
0x0a, 0x04,
0x0b, 0x00,
@@ -71,7 +71,6 @@ static u8 s7395_inittab[] = {
0x0d, 0x00,
0x0e, 0xc1,
0x0f, 0x54,
- 0x10, 0x40,
0x11, 0x7a,
0x12, 0x03,
0x13, 0x48,
@@ -84,23 +83,15 @@ static u8 s7395_inittab[] = {
0x1a, 0x88,
0x1b, 0x8f,
0x1c, 0xf0,
- 0x1e, 0x80,
0x20, 0x0b,
0x21, 0x54,
0x22, 0xff,
0x23, 0x01,
- 0x24, 0x9a,
- 0x25, 0x7f,
- 0x26, 0x00,
- 0x27, 0x00,
0x28, 0x46,
0x29, 0x66,
0x2a, 0x90,
0x2b, 0xfa,
0x2c, 0xd9,
- 0x2d, 0x02,
- 0x2e, 0xb1,
- 0x2f, 0x00,
0x30, 0x0,
0x31, 0x1e,
0x32, 0x14,
@@ -115,8 +106,6 @@ static u8 s7395_inittab[] = {
0x3b, 0x13,
0x3c, 0x11,
0x3d, 0x30,
- 0x3e, 0x00,
- 0x3f, 0x00,
0x40, 0x63,
0x41, 0x04,
0x42, 0x60,
@@ -126,8 +115,6 @@ static u8 s7395_inittab[] = {
0x46, 0x00,
0x47, 0x00,
0x4a, 0x00,
- 0x4b, 0xd1,
- 0x4c, 0x33,
0x50, 0x12,
0x51, 0x36,
0x52, 0x21,
@@ -183,5 +170,4 @@ static u8 s7395_inittab[] = {
0xf2, 0xc0,
0xff, 0xff,
};
-
#endif
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-07 05:18:18 +0000