diff options
27 files changed, 10567 insertions, 51 deletions
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index a8b33c2ec8d2..5f26d6c840de 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -76,6 +76,17 @@ config DRM_I915 endchoice +config DRM_I915_KMS + bool "Enable modesetting on intel by default" + depends on DRM_I915 + help + Choose this option if you want kernel modesetting enabled by default, + and you have a new enough userspace to support this. Running old + userspaces with this enabled will cause pain. Note that this causes + the driver to bind to PCI devices, which precludes loading things + like intelfb. + + config DRM_MGA tristate "Matrox g200/g400" depends on DRM diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index d8fb5d8ee7ea..dd57a5bd4572 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -8,7 +8,22 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \ i915_gem.o \ i915_gem_debug.o \ i915_gem_proc.o \ - i915_gem_tiling.o + i915_gem_tiling.o \ + intel_display.o \ + intel_crt.o \ + intel_lvds.o \ + intel_bios.o \ + intel_sdvo.o \ + intel_modes.o \ + intel_i2c.o \ + intel_fb.o \ + intel_tv.o \ + intel_dvo.o \ + dvo_ch7xxx.o \ + dvo_ch7017.o \ + dvo_ivch.o \ + dvo_tfp410.o \ + dvo_sil164.o i915-$(CONFIG_ACPI) += i915_opregion.o i915-$(CONFIG_COMPAT) += i915_ioc32.o diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h new file mode 100644 index 000000000000..e80866c5e1ae --- /dev/null +++ b/drivers/gpu/drm/i915/dvo.h @@ -0,0 +1,151 @@ +/* + * Copyright © 2006 Eric Anholt + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef _INTEL_DVO_H +#define _INTEL_DVO_H + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" + +struct intel_dvo_device { + char *name; + int type; + /* DVOA/B/C output register */ + u32 dvo_reg; + /* GPIO register used for i2c bus to control this device */ + u32 gpio; + int slave_addr; + struct intel_i2c_chan *i2c_bus; + + const struct intel_dvo_dev_ops *dev_ops; + void *dev_priv; + + struct drm_display_mode *panel_fixed_mode; + bool panel_wants_dither; +}; + +struct intel_dvo_dev_ops { + /* + * Initialize the device at startup time. + * Returns NULL if the device does not exist. + */ + bool (*init)(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus); + + /* + * Called to allow the output a chance to create properties after the + * RandR objects have been created. + */ + void (*create_resources)(struct intel_dvo_device *dvo); + + /* + * Turn on/off output or set intermediate power levels if available. + * + * Unsupported intermediate modes drop to the lower power setting. + * If the mode is DPMSModeOff, the output must be disabled, + * as the DPLL may be disabled afterwards. + */ + void (*dpms)(struct intel_dvo_device *dvo, int mode); + + /* + * Saves the output's state for restoration on VT switch. + */ + void (*save)(struct intel_dvo_device *dvo); + + /* + * Restore's the output's state at VT switch. + */ + void (*restore)(struct intel_dvo_device *dvo); + + /* + * Callback for testing a video mode for a given output. + * + * This function should only check for cases where a mode can't + * be supported on the output specifically, and not represent + * generic CRTC limitations. + * + * \return MODE_OK if the mode is valid, or another MODE_* otherwise. + */ + int (*mode_valid)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode); + + /* + * Callback to adjust the mode to be set in the CRTC. + * + * This allows an output to adjust the clock or even the entire set of + * timings, which is used for panels with fixed timings or for + * buses with clock limitations. + */ + bool (*mode_fixup)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + /* + * Callback for preparing mode changes on an output + */ + void (*prepare)(struct intel_dvo_device *dvo); + + /* + * Callback for committing mode changes on an output + */ + void (*commit)(struct intel_dvo_device *dvo); + + /* + * Callback for setting up a video mode after fixups have been made. + * + * This is only called while the output is disabled. The dpms callback + * must be all that's necessary for the output, to turn the output on + * after this function is called. + */ + void (*mode_set)(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + /* + * Probe for a connected output, and return detect_status. + */ + enum drm_connector_status (*detect)(struct intel_dvo_device *dvo); + + /** + * Query the device for the modes it provides. + * + * This function may also update MonInfo, mm_width, and mm_height. + * + * \return singly-linked list of modes or NULL if no modes found. + */ + struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo); + + /** + * Clean up driver-specific bits of the output + */ + void (*destroy) (struct intel_dvo_device *dvo); + + /** + * Debugging hook to dump device registers to log file + */ + void (*dump_regs)(struct intel_dvo_device *dvo); +}; + +#endif /* _INTEL_DVO_H */ diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c new file mode 100644 index 000000000000..03d4b4973b02 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -0,0 +1,454 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "dvo.h" + +#define CH7017_TV_DISPLAY_MODE 0x00 +#define CH7017_FLICKER_FILTER 0x01 +#define CH7017_VIDEO_BANDWIDTH 0x02 +#define CH7017_TEXT_ENHANCEMENT 0x03 +#define CH7017_START_ACTIVE_VIDEO 0x04 +#define CH7017_HORIZONTAL_POSITION 0x05 +#define CH7017_VERTICAL_POSITION 0x06 +#define CH7017_BLACK_LEVEL 0x07 +#define CH7017_CONTRAST_ENHANCEMENT 0x08 +#define CH7017_TV_PLL 0x09 +#define CH7017_TV_PLL_M 0x0a +#define CH7017_TV_PLL_N 0x0b +#define CH7017_SUB_CARRIER_0 0x0c +#define CH7017_CIV_CONTROL 0x10 +#define CH7017_CIV_0 0x11 +#define CH7017_CHROMA_BOOST 0x14 +#define CH7017_CLOCK_MODE 0x1c +#define CH7017_INPUT_CLOCK 0x1d +#define CH7017_GPIO_CONTROL 0x1e +#define CH7017_INPUT_DATA_FORMAT 0x1f +#define CH7017_CONNECTION_DETECT 0x20 +#define CH7017_DAC_CONTROL 0x21 +#define CH7017_BUFFERED_CLOCK_OUTPUT 0x22 +#define CH7017_DEFEAT_VSYNC 0x47 +#define CH7017_TEST_PATTERN 0x48 + +#define CH7017_POWER_MANAGEMENT 0x49 +/** Enables the TV output path. */ +#define CH7017_TV_EN (1 << 0) +#define CH7017_DAC0_POWER_DOWN (1 << 1) +#define CH7017_DAC1_POWER_DOWN (1 << 2) +#define CH7017_DAC2_POWER_DOWN (1 << 3) +#define CH7017_DAC3_POWER_DOWN (1 << 4) +/** Powers down the TV out block, and DAC0-3 */ +#define CH7017_TV_POWER_DOWN_EN (1 << 5) + +#define CH7017_VERSION_ID 0x4a + +#define CH7017_DEVICE_ID 0x4b +#define CH7017_DEVICE_ID_VALUE 0x1b +#define CH7018_DEVICE_ID_VALUE 0x1a +#define CH7019_DEVICE_ID_VALUE 0x19 + +#define CH7017_XCLK_D2_ADJUST 0x53 +#define CH7017_UP_SCALER_COEFF_0 0x55 +#define CH7017_UP_SCALER_COEFF_1 0x56 +#define CH7017_UP_SCALER_COEFF_2 0x57 +#define CH7017_UP_SCALER_COEFF_3 0x58 +#define CH7017_UP_SCALER_COEFF_4 0x59 +#define CH7017_UP_SCALER_VERTICAL_INC_0 0x5a +#define CH7017_UP_SCALER_VERTICAL_INC_1 0x5b +#define CH7017_GPIO_INVERT 0x5c +#define CH7017_UP_SCALER_HORIZONTAL_INC_0 0x5d +#define CH7017_UP_SCALER_HORIZONTAL_INC_1 0x5e + +#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT 0x5f +/**< Low bits of horizontal active pixel input */ + +#define CH7017_ACTIVE_INPUT_LINE_OUTPUT 0x60 +/** High bits of horizontal active pixel input */ +#define CH7017_LVDS_HAP_INPUT_MASK (0x7 << 0) +/** High bits of vertical active line output */ +#define CH7017_LVDS_VAL_HIGH_MASK (0x7 << 3) + +#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT 0x61 +/**< Low bits of vertical active line output */ + +#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT 0x62 +/**< Low bits of horizontal active pixel output */ + +#define CH7017_LVDS_POWER_DOWN 0x63 +/** High bits of horizontal active pixel output */ +#define CH7017_LVDS_HAP_HIGH_MASK (0x7 << 0) +/** Enables the LVDS power down state transition */ +#define CH7017_LVDS_POWER_DOWN_EN (1 << 6) +/** Enables the LVDS upscaler */ +#define CH7017_LVDS_UPSCALER_EN (1 << 7) +#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08 + +#define CH7017_LVDS_ENCODING 0x64 +#define CH7017_LVDS_DITHER_2D (1 << 2) +#define CH7017_LVDS_DITHER_DIS (1 << 3) +#define CH7017_LVDS_DUAL_CHANNEL_EN (1 << 4) +#define CH7017_LVDS_24_BIT (1 << 5) + +#define CH7017_LVDS_ENCODING_2 0x65 + +#define CH7017_LVDS_PLL_CONTROL 0x66 +/** Enables the LVDS panel output path */ +#define CH7017_LVDS_PANEN (1 << 0) +/** Enables the LVDS panel backlight */ +#define CH7017_LVDS_BKLEN (1 << 3) + +#define CH7017_POWER_SEQUENCING_T1 0x67 +#define CH7017_POWER_SEQUENCING_T2 0x68 +#define CH7017_POWER_SEQUENCING_T3 0x69 +#define CH7017_POWER_SEQUENCING_T4 0x6a +#define CH7017_POWER_SEQUENCING_T5 0x6b +#define CH7017_GPIO_DRIVER_TYPE 0x6c +#define CH7017_GPIO_DATA 0x6d +#define CH7017_GPIO_DIRECTION_CONTROL 0x6e + +#define CH7017_LVDS_PLL_FEEDBACK_DIV 0x71 +# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4 +# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0 +# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80 + +#define CH7017_LVDS_PLL_VCO_CONTROL 0x72 +# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80 +# define CH7017_LVDS_PLL_VCO_SHIFT 4 +# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0 + +#define CH7017_OUTPUTS_ENABLE 0x73 +# define CH7017_CHARGE_PUMP_LOW 0x0 +# define CH7017_CHARGE_PUMP_HIGH 0x3 +# define CH7017_LVDS_CHANNEL_A (1 << 3) +# define CH7017_LVDS_CHANNEL_B (1 << 4) +# define CH7017_TV_DAC_A (1 << 5) +# define CH7017_TV_DAC_B (1 << 6) +# define CH7017_DDC_SELECT_DC2 (1 << 7) + +#define CH7017_LVDS_OUTPUT_AMPLITUDE 0x74 +#define CH7017_LVDS_PLL_EMI_REDUCTION 0x75 +#define CH7017_LVDS_POWER_DOWN_FLICKER 0x76 + +#define CH7017_LVDS_CONTROL_2 0x78 +# define CH7017_LOOP_FILTER_SHIFT 5 +# define CH7017_PHASE_DETECTOR_SHIFT 0 + +#define CH7017_BANG_LIMIT_CONTROL 0x7f + +struct ch7017_priv { + uint8_t save_hapi; + uint8_t save_vali; + uint8_t save_valo; + uint8_t save_ailo; + uint8_t save_lvds_pll_vco; + uint8_t save_feedback_div; + uint8_t save_lvds_control_2; + uint8_t save_outputs_enable; + uint8_t save_lvds_power_down; + uint8_t save_power_management; +}; + +static void ch7017_dump_regs(struct intel_dvo_device *dvo); +static void ch7017_dpms(struct intel_dvo_device *dvo, int mode); + +static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val) +{ + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *val= in_buf[0]; + return true; + }; + + return false; +} + +static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val) +{ + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = val; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + return false; +} + +/** Probes for a CH7017 on the given bus and slave address. */ +static bool ch7017_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + struct ch7017_priv *priv; + uint8_t val; + + priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL); + if (priv == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = priv; + + if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val)) + goto fail; + + if (val != CH7017_DEVICE_ID_VALUE && + val != CH7018_DEVICE_ID_VALUE && + val != CH7019_DEVICE_ID_VALUE) { + DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n", + val, i2cbus->adapter.name,i2cbus->slave_addr); + goto fail; + } + + return true; +fail: + kfree(priv); + return false; +} + +static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo) +{ + return connector_status_unknown; +} + +static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 160000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void ch7017_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint8_t lvds_pll_feedback_div, lvds_pll_vco_control; + uint8_t outputs_enable, lvds_control_2, lvds_power_down; + uint8_t horizontal_active_pixel_input; + uint8_t horizontal_active_pixel_output, vertical_active_line_output; + uint8_t active_input_line_output; + + DRM_DEBUG("Registers before mode setting\n"); + ch7017_dump_regs(dvo); + + /* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/ + if (mode->clock < 100000) { + outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW; + lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) | + (13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT); + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_VCO_SHIFT) | + (3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) | + (0 << CH7017_PHASE_DETECTOR_SHIFT); + } else { + outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH; + lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) | + (3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT); + lvds_pll_feedback_div = 35; + lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) | + (0 << CH7017_PHASE_DETECTOR_SHIFT); + if (1) { /* XXX: dual channel panel detection. Assume yes for now. */ + outputs_enable |= CH7017_LVDS_CHANNEL_B; + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (2 << CH7017_LVDS_PLL_VCO_SHIFT) | + (13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + } else { + lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED | + (1 << CH7017_LVDS_PLL_VCO_SHIFT) | + (13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT); + } + } + + horizontal_active_pixel_input = mode->hdisplay & 0x00ff; + + vertical_active_line_output = mode->vdisplay & 0x00ff; + horizontal_active_pixel_output = mode->hdisplay & 0x00ff; + + active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) | + (((mode->vdisplay & 0x0700) >> 8) << 3); + + lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED | + (mode->hdisplay & 0x0700) >> 8; + + ch7017_dpms(dvo, DRM_MODE_DPMS_OFF); + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, + horizontal_active_pixel_input); + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT, + horizontal_active_pixel_output); + ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, + vertical_active_line_output); + ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, + active_input_line_output); + ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control); + ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div); + ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2); + ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable); + + /* Turn the LVDS back on with new settings. */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down); + + DRM_DEBUG("Registers after mode setting\n"); + ch7017_dump_regs(dvo); +} + +/* set the CH7017 power state */ +static void ch7017_dpms(struct intel_dvo_device *dvo, int mode) +{ + uint8_t val; + + ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val); + + /* Turn off TV/VGA, and never turn it on since we don't support it. */ + ch7017_write(dvo, CH7017_POWER_MANAGEMENT, + CH7017_DAC0_POWER_DOWN | + CH7017_DAC1_POWER_DOWN | + CH7017_DAC2_POWER_DOWN | + CH7017_DAC3_POWER_DOWN | + CH7017_TV_POWER_DOWN_EN); + + if (mode == DRM_MODE_DPMS_ON) { + /* Turn on the LVDS */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, + val & ~CH7017_LVDS_POWER_DOWN_EN); + } else { + /* Turn off the LVDS */ + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, + val | CH7017_LVDS_POWER_DOWN_EN); + } + + /* XXX: Should actually wait for update power status somehow */ + udelay(20000); +} + +static void ch7017_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + +#define DUMP(reg) \ +do { \ + ch7017_read(dvo, reg, &val); \ + DRM_DEBUG(#reg ": %02x\n", val); \ +} while (0) + + DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT); + DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT); + DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT); + DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT); + DUMP(CH7017_LVDS_PLL_VCO_CONTROL); + DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV); + DUMP(CH7017_LVDS_CONTROL_2); + DUMP(CH7017_OUTPUTS_ENABLE); + DUMP(CH7017_LVDS_POWER_DOWN); +} + +static void ch7017_save(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + ch7017_read(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, &priv->save_hapi); + ch7017_read(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, &priv->save_valo); + ch7017_read(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, &priv->save_ailo); + ch7017_read(dvo, CH7017_LVDS_PLL_VCO_CONTROL, &priv->save_lvds_pll_vco); + ch7017_read(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, &priv->save_feedback_div); + ch7017_read(dvo, CH7017_LVDS_CONTROL_2, &priv->save_lvds_control_2); + ch7017_read(dvo, CH7017_OUTPUTS_ENABLE, &priv->save_outputs_enable); + ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &priv->save_lvds_power_down); + ch7017_read(dvo, CH7017_POWER_MANAGEMENT, &priv->save_power_management); +} + +static void ch7017_restore(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + /* Power down before changing mode */ + ch7017_dpms(dvo, DRM_MODE_DPMS_OFF); + + ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, priv->save_hapi); + ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, priv->save_valo); + ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, priv->save_ailo); + ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, priv->save_lvds_pll_vco); + ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, priv->save_feedback_div); + ch7017_write(dvo, CH7017_LVDS_CONTROL_2, priv->save_lvds_control_2); + ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, priv->save_outputs_enable); + ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, priv->save_lvds_power_down); + ch7017_write(dvo, CH7017_POWER_MANAGEMENT, priv->save_power_management); +} + +static void ch7017_destroy(struct intel_dvo_device *dvo) +{ + struct ch7017_priv *priv = dvo->dev_priv; + + if (priv) { + kfree(priv); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ch7017_ops = { + .init = ch7017_init, + .detect = ch7017_detect, + .mode_valid = ch7017_mode_valid, + .mode_set = ch7017_mode_set, + .dpms = ch7017_dpms, + .dump_regs = ch7017_dump_regs, + .save = ch7017_save, + .restore = ch7017_restore, + .destroy = ch7017_destroy, +}; diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c new file mode 100644 index 000000000000..d2fd95dbd034 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -0,0 +1,368 @@ +/************************************************************************** + +Copyright © 2006 Dave Airlie + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#include "dvo.h" + +#define CH7xxx_REG_VID 0x4a +#define CH7xxx_REG_DID 0x4b + +#define CH7011_VID 0x83 /* 7010 as well */ +#define CH7009A_VID 0x84 +#define CH7009B_VID 0x85 +#define CH7301_VID 0x95 + +#define CH7xxx_VID 0x84 +#define CH7xxx_DID 0x17 + +#define CH7xxx_NUM_REGS 0x4c + +#define CH7xxx_CM 0x1c +#define CH7xxx_CM_XCM (1<<0) +#define CH7xxx_CM_MCP (1<<2) +#define CH7xxx_INPUT_CLOCK 0x1d +#define CH7xxx_GPIO 0x1e +#define CH7xxx_GPIO_HPIR (1<<3) +#define CH7xxx_IDF 0x1f + +#define CH7xxx_IDF_HSP (1<<3) +#define CH7xxx_IDF_VSP (1<<4) + +#define CH7xxx_CONNECTION_DETECT 0x20 +#define CH7xxx_CDET_DVI (1<<5) + +#define CH7301_DAC_CNTL 0x21 +#define CH7301_HOTPLUG 0x23 +#define CH7xxx_TCTL 0x31 +#define CH7xxx_TVCO 0x32 +#define CH7xxx_TPCP 0x33 +#define CH7xxx_TPD 0x34 +#define CH7xxx_TPVT 0x35 +#define CH7xxx_TLPF 0x36 +#define CH7xxx_TCT 0x37 +#define CH7301_TEST_PATTERN 0x48 + +#define CH7xxx_PM 0x49 +#define CH7xxx_PM_FPD (1<<0) +#define CH7301_PM_DACPD0 (1<<1) +#define CH7301_PM_DACPD1 (1<<2) +#define CH7301_PM_DACPD2 (1<<3) +#define CH7xxx_PM_DVIL (1<<6) +#define CH7xxx_PM_DVIP (1<<7) + +#define CH7301_SYNC_POLARITY 0x56 +#define CH7301_SYNC_RGB_YUV (1<<0) +#define CH7301_SYNC_POL_DVI (1<<5) + +/** @file + * driver for the Chrontel 7xxx DVI chip over DVO. + */ + +static struct ch7xxx_id_struct { + uint8_t vid; + char *name; +} ch7xxx_ids[] = { + { CH7011_VID, "CH7011" }, + { CH7009A_VID, "CH7009A" }, + { CH7009B_VID, "CH7009B" }, + { CH7301_VID, "CH7301" }, +}; + +struct ch7xxx_reg_state { + uint8_t regs[CH7xxx_NUM_REGS]; +}; + +struct ch7xxx_priv { + bool quiet; + + struct ch7xxx_reg_state save_reg; + struct ch7xxx_reg_state mode_reg; + uint8_t save_TCTL, save_TPCP, save_TPD, save_TPVT; + uint8_t save_TLPF, save_TCT, save_PM, save_IDF; +}; + +static void ch7xxx_save(struct intel_dvo_device *dvo); + +static char *ch7xxx_get_id(uint8_t vid) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) { + if (ch7xxx_ids[i].vid == vid) + return ch7xxx_ids[i].name; + } + + return NULL; +} + +/** Reads an 8 bit register */ +static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct ch7xxx_priv *ch7xxx= dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!ch7xxx->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +/** Writes an 8 bit register */ +static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!ch7xxx->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +static bool ch7xxx_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the CH7xxx chip on the specified i2c bus */ + struct ch7xxx_priv *ch7xxx; + uint8_t vendor, device; + char *name; + + ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL); + if (ch7xxx == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = ch7xxx; + ch7xxx->quiet = true; + + if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor)) + goto out; + + name = ch7xxx_get_id(vendor); + if (!name) { + DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", + vendor, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + + if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device)) + goto out; + + if (device != CH7xxx_DID) { + DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n", + vendor, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + ch7xxx->quiet = false; + DRM_DEBUG("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n", + name, vendor, device); + return true; +out: + kfree(ch7xxx); + return false; +} + +static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo) +{ + uint8_t cdet, orig_pm, pm; + + ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm); + + pm = orig_pm; + pm &= ~CH7xxx_PM_FPD; + pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP; + + ch7xxx_writeb(dvo, CH7xxx_PM, pm); + + ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet); + + ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm); + + if (cdet & CH7xxx_CDET_DVI) + return connector_status_connected; + return connector_status_disconnected; +} + +static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 165000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void ch7xxx_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint8_t tvco, tpcp, tpd, tlpf, idf; + + if (mode->clock <= 65000) { + tvco = 0x23; + tpcp = 0x08; + tpd = 0x16; + tlpf = 0x60; + } else { + tvco = 0x2d; + tpcp = 0x06; + tpd = 0x26; + tlpf = 0xa0; + } + + ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00); + ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco); + ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp); + ch7xxx_writeb(dvo, CH7xxx_TPD, tpd); + ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30); + ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf); + ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00); + + ch7xxx_readb(dvo, CH7xxx_IDF, &idf); + + idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP); + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + idf |= CH7xxx_IDF_HSP; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + idf |= CH7xxx_IDF_HSP; + + ch7xxx_writeb(dvo, CH7xxx_IDF, idf); +} + +/* set the CH7xxx power state */ +static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode) +{ + if (mode == DRM_MODE_DPMS_ON) + ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP); + else + ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD); +} + +static void ch7xxx_dump_regs(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + int i; + + for (i = 0; i < CH7xxx_NUM_REGS; i++) { + if ((i % 8) == 0 ) + DRM_DEBUG("\n %02X: ", i); + DRM_DEBUG("%02X ", ch7xxx->mode_reg.regs[i]); + } +} + +static void ch7xxx_save(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx= dvo->dev_priv; + + ch7xxx_readb(dvo, CH7xxx_TCTL, &ch7xxx->save_TCTL); + ch7xxx_readb(dvo, CH7xxx_TPCP, &ch7xxx->save_TPCP); + ch7xxx_readb(dvo, CH7xxx_TPD, &ch7xxx->save_TPD); + ch7xxx_readb(dvo, CH7xxx_TPVT, &ch7xxx->save_TPVT); + ch7xxx_readb(dvo, CH7xxx_TLPF, &ch7xxx->save_TLPF); + ch7xxx_readb(dvo, CH7xxx_PM, &ch7xxx->save_PM); + ch7xxx_readb(dvo, CH7xxx_IDF, &ch7xxx->save_IDF); +} + +static void ch7xxx_restore(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + + ch7xxx_writeb(dvo, CH7xxx_TCTL, ch7xxx->save_TCTL); + ch7xxx_writeb(dvo, CH7xxx_TPCP, ch7xxx->save_TPCP); + ch7xxx_writeb(dvo, CH7xxx_TPD, ch7xxx->save_TPD); + ch7xxx_writeb(dvo, CH7xxx_TPVT, ch7xxx->save_TPVT); + ch7xxx_writeb(dvo, CH7xxx_TLPF, ch7xxx->save_TLPF); + ch7xxx_writeb(dvo, CH7xxx_IDF, ch7xxx->save_IDF); + ch7xxx_writeb(dvo, CH7xxx_PM, ch7xxx->save_PM); +} + +static void ch7xxx_destroy(struct intel_dvo_device *dvo) +{ + struct ch7xxx_priv *ch7xxx = dvo->dev_priv; + + if (ch7xxx) { + kfree(ch7xxx); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ch7xxx_ops = { + .init = ch7xxx_init, + .detect = ch7xxx_detect, + .mode_valid = ch7xxx_mode_valid, + .mode_set = ch7xxx_mode_set, + .dpms = ch7xxx_dpms, + .dump_regs = ch7xxx_dump_regs, + .save = ch7xxx_save, + .restore = ch7xxx_restore, + .destroy = ch7xxx_destroy, +}; diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c new file mode 100644 index 000000000000..0c8d375e8e37 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -0,0 +1,442 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "dvo.h" + +/* + * register definitions for the i82807aa. + * + * Documentation on this chipset can be found in datasheet #29069001 at + * intel.com. + */ + +/* + * VCH Revision & GMBus Base Addr + */ +#define VR00 0x00 +# define VR00_BASE_ADDRESS_MASK 0x007f + +/* + * Functionality Enable + */ +#define VR01 0x01 + +/* + * Enable the panel fitter + */ +# define VR01_PANEL_FIT_ENABLE (1 << 3) +/* + * Enables the LCD display. + * + * This must not be set while VR01_DVO_BYPASS_ENABLE is set. + */ +# define VR01_LCD_ENABLE (1 << 2) +/** Enables the DVO repeater. */ +# define VR01_DVO_BYPASS_ENABLE (1 << 1) +/** Enables the DVO clock */ +# define VR01_DVO_ENABLE (1 << 0) + +/* + * LCD Interface Format + */ +#define VR10 0x10 +/** Enables LVDS output instead of CMOS */ +# define VR10_LVDS_ENABLE (1 << 4) +/** Enables 18-bit LVDS output. */ +# define VR10_INTERFACE_1X18 (0 << 2) +/** Enables 24-bit LVDS or CMOS output */ +# define VR10_INTERFACE_1X24 (1 << 2) +/** Enables 2x18-bit LVDS or CMOS output. */ +# define VR10_INTERFACE_2X18 (2 << 2) +/** Enables 2x24-bit LVDS output */ +# define VR10_INTERFACE_2X24 (3 << 2) + +/* + * VR20 LCD Horizontal Display Size + */ +#define VR20 0x20 + +/* + * LCD Vertical Display Size + */ +#define VR21 0x20 + +/* + * Panel power down status + */ +#define VR30 0x30 +/** Read only bit indicating that the panel is not in a safe poweroff state. */ +# define VR30_PANEL_ON (1 << 15) + +#define VR40 0x40 +# define VR40_STALL_ENABLE (1 << 13) +# define VR40_VERTICAL_INTERP_ENABLE (1 << 12) +# define VR40_ENHANCED_PANEL_FITTING (1 << 11) +# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10) +# define VR40_AUTO_RATIO_ENABLE (1 << 9) +# define VR40_CLOCK_GATING_ENABLE (1 << 8) + +/* + * Panel Fitting Vertical Ratio + * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2 + */ +#define VR41 0x41 + +/* + * Panel Fitting Horizontal Ratio + * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2 + */ +#define VR42 0x42 + +/* + * Horizontal Image Size + */ +#define VR43 0x43 + +/* VR80 GPIO 0 + */ +#define VR80 0x80 +#define VR81 0x81 +#define VR82 0x82 +#define VR83 0x83 +#define VR84 0x84 +#define VR85 0x85 +#define VR86 0x86 +#define VR87 0x87 + +/* VR88 GPIO 8 + */ +#define VR88 0x88 + +/* Graphics BIOS scratch 0 + */ +#define VR8E 0x8E +# define VR8E_PANEL_TYPE_MASK (0xf << 0) +# define VR8E_PANEL_INTERFACE_CMOS (0 << 4) +# define VR8E_PANEL_INTERFACE_LVDS (1 << 4) +# define VR8E_FORCE_DEFAULT_PANEL (1 << 5) + +/* Graphics BIOS scratch 1 + */ +#define VR8F 0x8F +# define VR8F_VCH_PRESENT (1 << 0) +# define VR8F_DISPLAY_CONN (1 << 1) +# define VR8F_POWER_MASK (0x3c) +# define VR8F_POWER_POS (2) + + +struct ivch_priv { + bool quiet; + + uint16_t width, height; + + uint16_t save_VR01; + uint16_t save_VR40; +}; + + +static void ivch_dump_regs(struct intel_dvo_device *dvo); + +/** + * Reads a register on the ivch. + * + * Each of the 256 registers are 16 bits long. + */ +static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[1]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 0, + }, + { + .addr = 0, + .flags = I2C_M_NOSTART, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD | I2C_M_NOSTART, + .len = 2, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + + if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) { + *data = (in_buf[1] << 8) | in_buf[0]; + return true; + }; + + if (!priv->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +/** Writes a 16-bit register on the ivch */ +static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data) +{ + struct ivch_priv *priv = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[3]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 3, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = data & 0xff; + out_buf[2] = data >> 8; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!priv->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +/** Probes the given bus and slave address for an ivch */ +static bool ivch_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + struct ivch_priv *priv; + uint16_t temp; + + priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL); + if (priv == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = priv; + priv->quiet = true; + + if (!ivch_read(dvo, VR00, &temp)) + goto out; + priv->quiet = false; + + /* Since the identification bits are probably zeroes, which doesn't seem + * very unique, check that the value in the base address field matches + * the address it's responding on. + */ + if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { + DRM_DEBUG("ivch detect failed due to address mismatch " + "(%d vs %d)\n", + (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); + goto out; + } + + ivch_read(dvo, VR20, &priv->width); + ivch_read(dvo, VR21, &priv->height); + + return true; + +out: + kfree(priv); + return false; +} + +static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo) +{ + return connector_status_connected; +} + +static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + if (mode->clock > 112000) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +/** Sets the power state of the panel connected to the ivch */ +static void ivch_dpms(struct intel_dvo_device *dvo, int mode) +{ + int i; + uint16_t vr01, vr30, backlight; + + /* Set the new power state of the panel. */ + if (!ivch_read(dvo, VR01, &vr01)) + return; + + if (mode == DRM_MODE_DPMS_ON) + backlight = 1; + else + backlight = 0; + ivch_write(dvo, VR80, backlight); + + if (mode == DRM_MODE_DPMS_ON) + vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE; + else + vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE); + + ivch_write(dvo, VR01, vr01); + + /* Wait for the panel to make its state transition */ + for (i = 0; i < 100; i++) { + if (!ivch_read(dvo, VR30, &vr30)) + break; + + if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON)) + break; + udelay(1000); + } + /* wait some more; vch may fail to resync sometimes without this */ + udelay(16 * 1000); +} + +static void ivch_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint16_t vr40 = 0; + uint16_t vr01; + + vr01 = 0; + vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE | + VR40_HORIZONTAL_INTERP_ENABLE); + + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) { + uint16_t x_ratio, y_ratio; + + vr01 |= VR01_PANEL_FIT_ENABLE; + vr40 |= VR40_CLOCK_GATING_ENABLE; + x_ratio = (((mode->hdisplay - 1) << 16) / + (adjusted_mode->hdisplay - 1)) >> 2; + y_ratio = (((mode->vdisplay - 1) << 16) / + (adjusted_mode->vdisplay - 1)) >> 2; + ivch_write (dvo, VR42, x_ratio); + ivch_write (dvo, VR41, y_ratio); + } else { + vr01 &= ~VR01_PANEL_FIT_ENABLE; + vr40 &= ~VR40_CLOCK_GATING_ENABLE; + } + vr40 &= ~VR40_AUTO_RATIO_ENABLE; + + ivch_write(dvo, VR01, vr01); + ivch_write(dvo, VR40, vr40); + + ivch_dump_regs(dvo); +} + +static void ivch_dump_regs(struct intel_dvo_device *dvo) +{ + uint16_t val; + + ivch_read(dvo, VR00, &val); + DRM_DEBUG("VR00: 0x%04x\n", val); + ivch_read(dvo, VR01, &val); + DRM_DEBUG("VR01: 0x%04x\n", val); + ivch_read(dvo, VR30, &val); + DRM_DEBUG("VR30: 0x%04x\n", val); + ivch_read(dvo, VR40, &val); + DRM_DEBUG("VR40: 0x%04x\n", val); + + /* GPIO registers */ + ivch_read(dvo, VR80, &val); + DRM_DEBUG("VR80: 0x%04x\n", val); + ivch_read(dvo, VR81, &val); + DRM_DEBUG("VR81: 0x%04x\n", val); + ivch_read(dvo, VR82, &val); + DRM_DEBUG("VR82: 0x%04x\n", val); + ivch_read(dvo, VR83, &val); + DRM_DEBUG("VR83: 0x%04x\n", val); + ivch_read(dvo, VR84, &val); + DRM_DEBUG("VR84: 0x%04x\n", val); + ivch_read(dvo, VR85, &val); + DRM_DEBUG("VR85: 0x%04x\n", val); + ivch_read(dvo, VR86, &val); + DRM_DEBUG("VR86: 0x%04x\n", val); + ivch_read(dvo, VR87, &val); + DRM_DEBUG("VR87: 0x%04x\n", val); + ivch_read(dvo, VR88, &val); + DRM_DEBUG("VR88: 0x%04x\n", val); + + /* Scratch register 0 - AIM Panel type */ + ivch_read(dvo, VR8E, &val); + DRM_DEBUG("VR8E: 0x%04x\n", val); + + /* Scratch register 1 - Status register */ + ivch_read(dvo, VR8F, &val); + DRM_DEBUG("VR8F: 0x%04x\n", val); +} + +static void ivch_save(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_read(dvo, VR01, &priv->save_VR01); + ivch_read(dvo, VR40, &priv->save_VR40); +} + +static void ivch_restore(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + ivch_write(dvo, VR01, priv->save_VR01); + ivch_write(dvo, VR40, priv->save_VR40); +} + +static void ivch_destroy(struct intel_dvo_device *dvo) +{ + struct ivch_priv *priv = dvo->dev_priv; + + if (priv) { + kfree(priv); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops ivch_ops= { + .init = ivch_init, + .dpms = ivch_dpms, + .save = ivch_save, + .restore = ivch_restore, + .mode_valid = ivch_mode_valid, + .mode_set = ivch_mode_set, + .detect = ivch_detect, + .dump_regs = ivch_dump_regs, + .destroy = ivch_destroy, +}; diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c new file mode 100644 index 000000000000..033a4bb070b2 --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -0,0 +1,302 @@ +/************************************************************************** + +Copyright © 2006 Dave Airlie + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +#include "dvo.h" + +#define SIL164_VID 0x0001 +#define SIL164_DID 0x0006 + +#define SIL164_VID_LO 0x00 +#define SIL164_VID_HI 0x01 +#define SIL164_DID_LO 0x02 +#define SIL164_DID_HI 0x03 +#define SIL164_REV 0x04 +#define SIL164_RSVD 0x05 +#define SIL164_FREQ_LO 0x06 +#define SIL164_FREQ_HI 0x07 + +#define SIL164_REG8 0x08 +#define SIL164_8_VEN (1<<5) +#define SIL164_8_HEN (1<<4) +#define SIL164_8_DSEL (1<<3) +#define SIL164_8_BSEL (1<<2) +#define SIL164_8_EDGE (1<<1) +#define SIL164_8_PD (1<<0) + +#define SIL164_REG9 0x09 +#define SIL164_9_VLOW (1<<7) +#define SIL164_9_MSEL_MASK (0x7<<4) +#define SIL164_9_TSEL (1<<3) +#define SIL164_9_RSEN (1<<2) +#define SIL164_9_HTPLG (1<<1) +#define SIL164_9_MDI (1<<0) + +#define SIL164_REGC 0x0c + +struct sil164_save_rec { + uint8_t reg8; + uint8_t reg9; + uint8_t regc; +}; + +struct sil164_priv { + //I2CDevRec d; + bool quiet; + struct sil164_save_rec save_regs; + struct sil164_save_rec mode_regs; +}; + +#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr)) + +static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct sil164_priv *sil = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!sil->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct sil164_priv *sil= dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!sil->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +/* Silicon Image 164 driver for chip on i2c bus */ +static bool sil164_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the SIL164 chip on the specified i2c bus */ + struct sil164_priv *sil; + unsigned char ch; + + sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL); + if (sil == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = sil; + sil->quiet = true; + + if (!sil164_readb(dvo, SIL164_VID_LO, &ch)) + goto out; + + if (ch != (SIL164_VID & 0xff)) { + DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", + ch, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + if (!sil164_readb(dvo, SIL164_DID_LO, &ch)) + goto out; + + if (ch != (SIL164_DID & 0xff)) { + DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n", + ch, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + sil->quiet = false; + + DRM_DEBUG("init sil164 dvo controller successfully!\n"); + return true; + +out: + kfree(sil); + return false; +} + +static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo) +{ + uint8_t reg9; + + sil164_readb(dvo, SIL164_REG9, ®9); + + if (reg9 & SIL164_9_HTPLG) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + return MODE_OK; +} + +static void sil164_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* As long as the basics are set up, since we don't have clock + * dependencies in the mode setup, we can just leave the + * registers alone and everything will work fine. + */ + /* recommended programming sequence from doc */ + /*sil164_writeb(sil, 0x08, 0x30); + sil164_writeb(sil, 0x09, 0x00); + sil164_writeb(sil, 0x0a, 0x90); + sil164_writeb(sil, 0x0c, 0x89); + sil164_writeb(sil, 0x08, 0x31);*/ + /* don't do much */ + return; +} + +/* set the SIL164 power state */ +static void sil164_dpms(struct intel_dvo_device *dvo, int mode) +{ + int ret; + unsigned char ch; + + ret = sil164_readb(dvo, SIL164_REG8, &ch); + if (ret == false) + return; + + if (mode == DRM_MODE_DPMS_ON) + ch |= SIL164_8_PD; + else + ch &= ~SIL164_8_PD; + + sil164_writeb(dvo, SIL164_REG8, ch); + return; +} + +static void sil164_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val; + + sil164_readb(dvo, SIL164_FREQ_LO, &val); + DRM_DEBUG("SIL164_FREQ_LO: 0x%02x\n", val); + sil164_readb(dvo, SIL164_FREQ_HI, &val); + DRM_DEBUG("SIL164_FREQ_HI: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REG8, &val); + DRM_DEBUG("SIL164_REG8: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REG9, &val); + DRM_DEBUG("SIL164_REG9: 0x%02x\n", val); + sil164_readb(dvo, SIL164_REGC, &val); + DRM_DEBUG("SIL164_REGC: 0x%02x\n", val); +} + +static void sil164_save(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil= dvo->dev_priv; + + if (!sil164_readb(dvo, SIL164_REG8, &sil->save_regs.reg8)) + return; + + if (!sil164_readb(dvo, SIL164_REG9, &sil->save_regs.reg9)) + return; + + if (!sil164_readb(dvo, SIL164_REGC, &sil->save_regs.regc)) + return; + + return; +} + +static void sil164_restore(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil = dvo->dev_priv; + + /* Restore it powered down initially */ + sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8 & ~0x1); + + sil164_writeb(dvo, SIL164_REG9, sil->save_regs.reg9); + sil164_writeb(dvo, SIL164_REGC, sil->save_regs.regc); + sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8); +} + +static void sil164_destroy(struct intel_dvo_device *dvo) +{ + struct sil164_priv *sil = dvo->dev_priv; + + if (sil) { + kfree(sil); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops sil164_ops = { + .init = sil164_init, + .detect = sil164_detect, + .mode_valid = sil164_mode_valid, + .mode_set = sil164_mode_set, + .dpms = sil164_dpms, + .dump_regs = sil164_dump_regs, + .save = sil164_save, + .restore = sil164_restore, + .destroy = sil164_destroy, +}; diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c new file mode 100644 index 000000000000..207fda806ebf --- /dev/null +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -0,0 +1,335 @@ +/* + * Copyright © 2007 Dave Mueller + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Dave Mueller <dave.mueller@gmx.ch> + * + */ + +#include "dvo.h" + +/* register definitions according to the TFP410 data sheet */ +#define TFP410_VID 0x014C +#define TFP410_DID 0x0410 + +#define TFP410_VID_LO 0x00 +#define TFP410_VID_HI 0x01 +#define TFP410_DID_LO 0x02 +#define TFP410_DID_HI 0x03 +#define TFP410_REV 0x04 + +#define TFP410_CTL_1 0x08 +#define TFP410_CTL_1_TDIS (1<<6) +#define TFP410_CTL_1_VEN (1<<5) +#define TFP410_CTL_1_HEN (1<<4) +#define TFP410_CTL_1_DSEL (1<<3) +#define TFP410_CTL_1_BSEL (1<<2) +#define TFP410_CTL_1_EDGE (1<<1) +#define TFP410_CTL_1_PD (1<<0) + +#define TFP410_CTL_2 0x09 +#define TFP410_CTL_2_VLOW (1<<7) +#define TFP410_CTL_2_MSEL_MASK (0x7<<4) +#define TFP410_CTL_2_MSEL (1<<4) +#define TFP410_CTL_2_TSEL (1<<3) +#define TFP410_CTL_2_RSEN (1<<2) +#define TFP410_CTL_2_HTPLG (1<<1) +#define TFP410_CTL_2_MDI (1<<0) + +#define TFP410_CTL_3 0x0A +#define TFP410_CTL_3_DK_MASK (0x7<<5) +#define TFP410_CTL_3_DK (1<<5) +#define TFP410_CTL_3_DKEN (1<<4) +#define TFP410_CTL_3_CTL_MASK (0x7<<1) +#define TFP410_CTL_3_CTL (1<<1) + +#define TFP410_USERCFG 0x0B + +#define TFP410_DE_DLY 0x32 + +#define TFP410_DE_CTL 0x33 +#define TFP410_DE_CTL_DEGEN (1<<6) +#define TFP410_DE_CTL_VSPOL (1<<5) +#define TFP410_DE_CTL_HSPOL (1<<4) +#define TFP410_DE_CTL_DEDLY8 (1<<0) + +#define TFP410_DE_TOP 0x34 + +#define TFP410_DE_CNT_LO 0x36 +#define TFP410_DE_CNT_HI 0x37 + +#define TFP410_DE_LIN_LO 0x38 +#define TFP410_DE_LIN_HI 0x39 + +#define TFP410_H_RES_LO 0x3A +#define TFP410_H_RES_HI 0x3B + +#define TFP410_V_RES_LO 0x3C +#define TFP410_V_RES_HI 0x3D + +struct tfp410_save_rec { + uint8_t ctl1; + uint8_t ctl2; +}; + +struct tfp410_priv { + bool quiet; + + struct tfp410_save_rec saved_reg; + struct tfp410_save_rec mode_reg; +}; + +static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = i2cbus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + }; + + if (!tfp->quiet) { + DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + return false; +} + +static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + struct intel_i2c_chan *i2cbus = dvo->i2c_bus; + uint8_t out_buf[2]; + struct i2c_msg msg = { + .addr = i2cbus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1) + return true; + + if (!tfp->quiet) { + DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n", + addr, i2cbus->adapter.name, i2cbus->slave_addr); + } + + return false; +} + +static int tfp410_getid(struct intel_dvo_device *dvo, int addr) +{ + uint8_t ch1, ch2; + + if (tfp410_readb(dvo, addr+0, &ch1) && + tfp410_readb(dvo, addr+1, &ch2)) + return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF); + + return -1; +} + +/* Ti TFP410 driver for chip on i2c bus */ +static bool tfp410_init(struct intel_dvo_device *dvo, + struct intel_i2c_chan *i2cbus) +{ + /* this will detect the tfp410 chip on the specified i2c bus */ + struct tfp410_priv *tfp; + int id; + + tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL); + if (tfp == NULL) + return false; + + dvo->i2c_bus = i2cbus; + dvo->i2c_bus->slave_addr = dvo->slave_addr; + dvo->dev_priv = tfp; + tfp->quiet = true; + + if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { + DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n", + id, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + + if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { + DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n", + id, i2cbus->adapter.name, i2cbus->slave_addr); + goto out; + } + tfp->quiet = false; + return true; +out: + kfree(tfp); + return false; +} + +static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo) +{ + enum drm_connector_status ret = connector_status_disconnected; + uint8_t ctl2; + + if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) { + if (ctl2 & TFP410_CTL_2_HTPLG) + ret = connector_status_connected; + else + ret = connector_status_disconnected; + } + + return ret; +} + +static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + return MODE_OK; +} + +static void tfp410_mode_set(struct intel_dvo_device *dvo, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* As long as the basics are set up, since we don't have clock dependencies + * in the mode setup, we can just leave the registers alone and everything + * will work fine. + */ + /* don't do much */ + return; +} + +/* set the tfp410 power state */ +static void tfp410_dpms(struct intel_dvo_device *dvo, int mode) +{ + uint8_t ctl1; + + if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1)) + return; + + if (mode == DRM_MODE_DPMS_ON) + ctl1 |= TFP410_CTL_1_PD; + else + ctl1 &= ~TFP410_CTL_1_PD; + + tfp410_writeb(dvo, TFP410_CTL_1, ctl1); +} + +static void tfp410_dump_regs(struct intel_dvo_device *dvo) +{ + uint8_t val, val2; + + tfp410_readb(dvo, TFP410_REV, &val); + DRM_DEBUG("TFP410_REV: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_1, &val); + DRM_DEBUG("TFP410_CTL1: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_2, &val); + DRM_DEBUG("TFP410_CTL2: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_CTL_3, &val); + DRM_DEBUG("TFP410_CTL3: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_USERCFG, &val); + DRM_DEBUG("TFP410_USERCFG: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_DLY, &val); + DRM_DEBUG("TFP410_DE_DLY: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_CTL, &val); + DRM_DEBUG("TFP410_DE_CTL: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_TOP, &val); + DRM_DEBUG("TFP410_DE_TOP: 0x%02X\n", val); + tfp410_readb(dvo, TFP410_DE_CNT_LO, &val); + tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2); + DRM_DEBUG("TFP410_DE_CNT: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_DE_LIN_LO, &val); + tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2); + DRM_DEBUG("TFP410_DE_LIN: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_H_RES_LO, &val); + tfp410_readb(dvo, TFP410_H_RES_HI, &val2); + DRM_DEBUG("TFP410_H_RES: 0x%02X%02X\n", val2, val); + tfp410_readb(dvo, TFP410_V_RES_LO, &val); + tfp410_readb(dvo, TFP410_V_RES_HI, &val2); + DRM_DEBUG("TFP410_V_RES: 0x%02X%02X\n", val2, val); +} + +static void tfp410_save(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + if (!tfp410_readb(dvo, TFP410_CTL_1, &tfp->saved_reg.ctl1)) + return; + + if (!tfp410_readb(dvo, TFP410_CTL_2, &tfp->saved_reg.ctl2)) + return; +} + +static void tfp410_restore(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + /* Restore it powered down initially */ + tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1 & ~0x1); + + tfp410_writeb(dvo, TFP410_CTL_2, tfp->saved_reg.ctl2); + tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1); +} + +static void tfp410_destroy(struct intel_dvo_device *dvo) +{ + struct tfp410_priv *tfp = dvo->dev_priv; + + if (tfp) { + kfree(tfp); + dvo->dev_priv = NULL; + } +} + +struct intel_dvo_dev_ops tfp410_ops = { + .init = tfp410_init, + .detect = tfp410_detect, + .mode_valid = tfp410_mode_valid, + .mode_set = tfp410_mode_set, + .dpms = tfp410_dpms, + .dump_regs = tfp410_dump_regs, + .save = tfp410_save, + .restore = tfp410_restore, + .destroy = tfp410_destroy, +}; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 1b81b6a6d81b..b5d0809eecb1 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -28,6 +28,8 @@ #include "drmP.h" #include "drm.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" @@ -125,6 +127,13 @@ void i915_kernel_lost_context(struct drm_device * dev) struct drm_i915_master_private *master_priv; drm_i915_ring_buffer_t *ring = &(dev_priv->ring); + /* + * We should never lose context on the ring with modesetting + * as we don't expose it to userspace + */ + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; ring->space = ring->head - (ring->tail + 8); @@ -769,6 +778,11 @@ static int i915_set_status_page(struct drm_device *dev, void *data, return -EINVAL; } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + WARN(1, "tried to set status page when mode setting active\n"); + return 0; + } + printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr); dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12); @@ -797,6 +811,173 @@ static int i915_set_status_page(struct drm_device *dev, void *data, return 0; } +/** + * i915_probe_agp - get AGP bootup configuration + * @pdev: PCI device + * @aperture_size: returns AGP aperture configured size + * @preallocated_size: returns size of BIOS preallocated AGP space + * + * Since Intel integrated graphics are UMA, the BIOS has to set aside + * some RAM for the framebuffer at early boot. This code figures out + * how much was set aside so we can use it for our own purposes. + */ +int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size, + unsigned long *preallocated_size) +{ + struct pci_dev *bridge_dev; + u16 tmp = 0; + unsigned long overhead; + + bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + if (!bridge_dev) { + DRM_ERROR("bridge device not found\n"); + return -1; + } + + /* Get the fb aperture size and "stolen" memory amount. */ + pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp); + pci_dev_put(bridge_dev); + + *aperture_size = 1024 * 1024; + *preallocated_size = 1024 * 1024; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_82830_CGC: + case PCI_DEVICE_ID_INTEL_82845G_IG: + case PCI_DEVICE_ID_INTEL_82855GM_IG: + case PCI_DEVICE_ID_INTEL_82865_IG: + if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M) + *aperture_size *= 64; + else + *aperture_size *= 128; + break; + default: + /* 9xx supports large sizes, just look at the length */ + *aperture_size = pci_resource_len(pdev, 2); + break; + } + + /* + * Some of the preallocated space is taken by the GTT + * and popup. GTT is 1K per MB of aperture size, and popup is 4K. + */ + overhead = (*aperture_size / 1024) + 4096; + switch (tmp & INTEL_855_GMCH_GMS_MASK) { + case INTEL_855_GMCH_GMS_STOLEN_1M: + break; /* 1M already */ + case INTEL_855_GMCH_GMS_STOLEN_4M: + *preallocated_size *= 4; + break; + case INTEL_855_GMCH_GMS_STOLEN_8M: + *preallocated_size *= 8; + break; + case INTEL_855_GMCH_GMS_STOLEN_16M: + *preallocated_size *= 16; + break; + case INTEL_855_GMCH_GMS_STOLEN_32M: + *preallocated_size *= 32; + break; + case INTEL_915G_GMCH_GMS_STOLEN_48M: + *preallocated_size *= 48; + break; + case INTEL_915G_GMCH_GMS_STOLEN_64M: + *preallocated_size *= 64; + break; + case INTEL_855_GMCH_GMS_DISABLED: + DRM_ERROR("video memory is disabled\n"); + return -1; + default: + DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n", + tmp & INTEL_855_GMCH_GMS_MASK); + return -1; + } + *preallocated_size -= overhead; + + return 0; +} + +static int i915_load_modeset_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long agp_size, prealloc_size; + int fb_bar = IS_I9XX(dev) ? 2 : 0; + int ret = 0; + + dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & + 0xff000000; + + DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base); + + if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev))) + dev_priv->cursor_needs_physical = true; + else + dev_priv->cursor_needs_physical = false; + + i915_probe_agp(dev->pdev, &agp_size, &prealloc_size); + + /* Basic memrange allocator for stolen space (aka vram) */ + drm_mm_init(&dev_priv->vram, 0, prealloc_size); + + /* Let GEM Manage from end of prealloc space to end of aperture */ + i915_gem_do_init(dev, prealloc_size, agp_size); + + ret = i915_gem_init_ringbuffer(dev); + if (ret) + goto out; + + dev_priv->mm.gtt_mapping = + io_mapping_create_wc(dev->agp->base, + dev->agp->agp_info.aper_size * 1024*1024); + + /* Allow hardware batchbuffers unless told otherwise. + */ + dev_priv->allow_batchbuffer = 1; + + ret = intel_init_bios(dev); + if (ret) + DRM_INFO("failed to find VBIOS tables\n"); + + ret = drm_irq_install(dev); + if (ret) + goto destroy_ringbuffer; + + /* FIXME: re-add hotplug support */ +#if 0 + ret = drm_hotplug_init(dev); + if (ret) + goto destroy_ringbuffer; +#endif + + /* Always safe in the mode setting case. */ + /* FIXME: do pre/post-mode set stuff in core KMS code */ + dev->vblank_disable_allowed = 1; + + /* + * Initialize the hardware status page IRQ location. + */ + + I915_WRITE(INSTPM, (1 << 5) | (1 << 21)); + + intel_modeset_init(dev); + + drm_helper_initial_config(dev, false); + + dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL); + if (!dev->devname) { + ret = -ENOMEM; + goto modeset_cleanup; + } + + return 0; + +modeset_cleanup: + intel_modeset_cleanup(dev); +destroy_ringbuffer: + i915_gem_cleanup_ringbuffer(dev); +out: + return ret; +} + int i915_master_create(struct drm_device *dev, struct drm_master *master) { struct drm_i915_master_private *master_priv; @@ -821,6 +1002,25 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master) master->driver_priv = NULL; } + +int i915_driver_firstopen(struct drm_device *dev) +{ + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return 0; + return 0; +} + +/** + * i915_driver_load - setup chip and create an initial config + * @dev: DRM device + * @flags: startup flags + * + * The driver load routine has to do several things: + * - drive output discovery via intel_modeset_init() + * - initialize the memory manager + * - allocate initial config memory + * - setup the DRM framebuffer with the allocated memory + */ int i915_driver_load(struct drm_device *dev, unsigned long flags) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -848,6 +1048,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) size = drm_get_resource_len(dev, mmio_bar); dev_priv->regs = ioremap(base, size); + if (!dev_priv->regs) { + DRM_ERROR("failed to map registers\n"); + ret = -EIO; + goto free_priv; + } #ifdef CONFIG_HIGHMEM64G /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */ @@ -863,7 +1068,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!I915_NEED_GFX_HWS(dev)) { ret = i915_init_phys_hws(dev); if (ret != 0) - return ret; + goto out_rmmap; } /* On the 945G/GM, the chipset reports the MSI capability on the @@ -883,6 +1088,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) intel_opregion_init(dev); spin_lock_init(&dev_priv->user_irq_lock); + dev_priv->user_irq_refcount = 0; ret = drm_vblank_init(dev, I915_NUM_PIPE); @@ -891,6 +1097,20 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) return ret; } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + ret = i915_load_modeset_init(dev); + if (ret < 0) { + DRM_ERROR("failed to init modeset\n"); + goto out_rmmap; + } + } + + return 0; + +out_rmmap: + iounmap(dev_priv->regs); +free_priv: + drm_free(dev_priv, sizeof(struct drm_i915_private), DRM_MEM_DRIVER); return ret; } @@ -898,16 +1118,29 @@ int i915_driver_unload(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + io_mapping_free(dev_priv->mm.gtt_mapping); + drm_irq_uninstall(dev); + } + if (dev->pdev->msi_enabled) pci_disable_msi(dev->pdev); - i915_free_hws(dev); - if (dev_priv->regs != NULL) iounmap(dev_priv->regs); intel_opregion_free(dev); + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + intel_modeset_cleanup(dev); + + mutex_lock(&dev->struct_mutex); + i915_gem_cleanup_ringbuffer(dev); + mutex_unlock(&dev->struct_mutex); + drm_mm_takedown(&dev_priv->vram); + i915_gem_lastclose(dev); + } + drm_free(dev->dev_private, sizeof(drm_i915_private_t), DRM_MEM_DRIVER); @@ -933,12 +1166,26 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv) return 0; } +/** + * i915_driver_lastclose - clean up after all DRM clients have exited + * @dev: DRM device + * + * Take care of cleaning up after all DRM clients have exited. In the + * mode setting case, we want to restore the kernel's initial mode (just + * in case the last client left us in a bad state). + * + * Additionally, in the non-mode setting case, we'll tear down the AGP + * and DMA structures, since the kernel won't be using them, and clea + * up any GEM state. + */ void i915_driver_lastclose(struct drm_device * dev) { drm_i915_private_t *dev_priv = dev->dev_private; - if (!dev_priv) + if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) { + intelfb_restore(); return; + } i915_gem_lastclose(dev); @@ -951,7 +1198,8 @@ void i915_driver_lastclose(struct drm_device * dev) void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; - i915_mem_release(dev, file_priv, dev_priv->agp_heap); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + i915_mem_release(dev, file_priv, dev_priv->agp_heap); } void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index e0d996ed9026..cbee41c32417 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -33,11 +33,22 @@ #include "i915_drv.h" #include "drm_pciids.h" +#include <linux/console.h> + +unsigned int i915_modeset = -1; +module_param_named(modeset, i915_modeset, int, 0400); + +unsigned int i915_fbpercrtc = 0; +module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; +#if defined(CONFIG_DRM_I915_KMS) +MODULE_DEVICE_TABLE(pci, pciidlist); +#endif + static int i915_suspend(struct drm_device *dev, pm_message_t state) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -148,6 +159,28 @@ static struct drm_driver driver = { static int __init i915_init(void) { driver.num_ioctls = i915_max_ioctl; + + /* + * If CONFIG_DRM_I915_KMS is set, default to KMS unless + * explicitly disabled with the module pararmeter. + * + * Otherwise, just follow the parameter (defaulting to off). + * + * Allow optional vga_text_mode_force boot option to override + * the default behavior. + */ +#if defined(CONFIG_DRM_I915_KMS) + if (i915_modeset != 0) + driver.driver_features |= DRIVER_MODESET; +#endif + if (i915_modeset == 1) + driver.driver_features |= DRIVER_MODESET; + +#ifdef CONFIG_VGA_CONSOLE + if (vgacon_text_force() && i915_modeset == -1) + driver.driver_features &= ~DRIVER_MODESET; +#endif + return drm_init(&driver); } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 85a072e80637..6f18ee68d06a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -31,6 +31,7 @@ #define _I915_DRV_H_ #include "i915_reg.h" +#include "intel_bios.h" #include <linux/io-mapping.h> /* General customization: @@ -152,8 +153,26 @@ typedef struct drm_i915_private { unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds; int vblank_pipe; + bool cursor_needs_physical; + + struct drm_mm vram; + + int irq_enabled; + struct intel_opregion opregion; + /* LVDS info */ + int backlight_duty_cycle; /* restore backlight to this value */ + bool panel_wants_dither; + struct drm_display_mode *panel_fixed_mode; + struct drm_display_mode *vbt_mode; /* if any */ + + /* Feature bits from the VBIOS */ + int int_tv_support:1; + int lvds_dither:1; + int lvds_vbt:1; + int int_crt_support:1; + struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ @@ -413,6 +432,10 @@ struct drm_i915_gem_object { * flags which individual pages are valid. */ uint8_t *page_cpu_valid; + + /** User space pin count and filp owning the pin */ + uint32_t user_pin_count; + struct drm_file *pin_filp; }; /** @@ -442,8 +465,16 @@ struct drm_i915_file_private { } mm; }; +enum intel_chip_family { + CHIP_I8XX = 0x01, + CHIP_I9XX = 0x02, + CHIP_I915 = 0x04, + CHIP_I965 = 0x08, +}; + extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; +extern unsigned int i915_fbpercrtc; extern int i915_master_create(struct drm_device *dev, struct drm_master *master); extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master); @@ -472,6 +503,7 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); +extern void i915_enable_interrupt (struct drm_device *dev); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); @@ -556,7 +588,16 @@ uint32_t i915_get_gem_seqno(struct drm_device *dev); void i915_gem_retire_requests(struct drm_device *dev); void i915_gem_retire_work_handler(struct work_struct *work); void i915_gem_clflush_object(struct drm_gem_object *obj); +int i915_gem_object_set_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +int i915_gem_init_ringbuffer(struct drm_device *dev); +void i915_gem_cleanup_ringbuffer(struct drm_device *dev); +int i915_gem_do_init(struct drm_device *dev, unsigned long start, + unsigned long end); int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); +int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, + int write); /* i915_gem_tiling.c */ void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); @@ -595,6 +636,10 @@ static inline void opregion_asle_intr(struct drm_device *dev) { return; } static inline void opregion_enable_asle(struct drm_device *dev) { return; } #endif +/* modesetting */ +extern void intel_modeset_init(struct drm_device *dev); +extern void intel_modeset_cleanup(struct drm_device *dev); + /** * Lock test for when it's just for synchronization of ring access. * diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0ac977112f72..c4ccaf3b3c7f 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -30,6 +30,7 @@ #include "i915_drm.h" #include "i915_drv.h" #include <linux/swap.h> +#include <linux/pci.h> #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) @@ -40,8 +41,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); -static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, - int write); static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write); static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, @@ -57,33 +56,37 @@ static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj); static void i915_gem_clear_fence_reg(struct drm_gem_object *obj); static int i915_gem_evict_something(struct drm_device *dev); -static void -i915_gem_cleanup_ringbuffer(struct drm_device *dev); - -int -i915_gem_init_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) +int i915_gem_do_init(struct drm_device *dev, unsigned long start, + unsigned long end) { drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_i915_gem_init *args = data; - - mutex_lock(&dev->struct_mutex); - if (args->gtt_start >= args->gtt_end || - (args->gtt_start & (PAGE_SIZE - 1)) != 0 || - (args->gtt_end & (PAGE_SIZE - 1)) != 0) { - mutex_unlock(&dev->struct_mutex); + if (start >= end || + (start & (PAGE_SIZE - 1)) != 0 || + (end & (PAGE_SIZE - 1)) != 0) { return -EINVAL; } - drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start, - args->gtt_end - args->gtt_start); + drm_mm_init(&dev_priv->mm.gtt_space, start, + end - start); - dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start); + dev->gtt_total = (uint32_t) (end - start); + + return 0; +} +int +i915_gem_init_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_init *args = data; + int ret; + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_do_init(dev, args->gtt_start, args->gtt_end); mutex_unlock(&dev->struct_mutex); - return 0; + return ret; } int @@ -1246,7 +1249,8 @@ i915_gem_object_unbind(struct drm_gem_object *obj) /* blow away mappings if mapped through GTT */ offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT; - unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1); + if (dev->dev_mapping) + unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) i915_gem_clear_fence_reg(obj); @@ -1508,7 +1512,7 @@ static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_i915_fence_reg *reg = NULL; int i, ret; @@ -1567,8 +1571,9 @@ try_again: * for this object next time we need it. */ offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT; - unmap_mapping_range(dev->dev_mapping, offset, - reg->obj->size, 1); + if (dev->dev_mapping) + unmap_mapping_range(dev->dev_mapping, offset, + reg->obj->size, 1); old_obj_priv->fence_reg = I915_FENCE_REG_NONE; } @@ -1594,7 +1599,7 @@ static void i915_gem_clear_fence_reg(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct drm_i915_private *dev_priv = dev->dev_private; + drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; if (IS_I965G(dev)) @@ -1764,7 +1769,7 @@ i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) * This function returns when the move is complete, including waiting on * flushes to occur. */ -static int +int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -2706,11 +2711,22 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, } obj_priv = obj->driver_private; - ret = i915_gem_object_pin(obj, args->alignment); - if (ret != 0) { - drm_gem_object_unreference(obj); + if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { + DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", + args->handle); mutex_unlock(&dev->struct_mutex); - return ret; + return -EINVAL; + } + + obj_priv->user_pin_count++; + obj_priv->pin_filp = file_priv; + if (obj_priv->user_pin_count == 1) { + ret = i915_gem_object_pin(obj, args->alignment); + if (ret != 0) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } } /* XXX - flush the CPU caches for pinned objects @@ -2730,6 +2746,7 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data, { struct drm_i915_gem_pin *args = data; struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; mutex_lock(&dev->struct_mutex); @@ -2741,7 +2758,19 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data, return -EBADF; } - i915_gem_object_unpin(obj); + obj_priv = obj->driver_private; + if (obj_priv->pin_filp != file_priv) { + DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n", + args->handle); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + obj_priv->user_pin_count--; + if (obj_priv->user_pin_count == 0) { + obj_priv->pin_filp = NULL; + i915_gem_object_unpin(obj); + } drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -3036,12 +3065,13 @@ i915_gem_init_hws(struct drm_device *dev) return 0; } -static int +int i915_gem_init_ringbuffer(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; + drm_i915_ring_buffer_t *ring = &dev_priv->ring; int ret; u32 head; @@ -3063,24 +3093,24 @@ i915_gem_init_ringbuffer(struct drm_device *dev) } /* Set up the kernel mapping for the ring. */ - dev_priv->ring.Size = obj->size; - dev_priv->ring.tail_mask = obj->size - 1; + ring->Size = obj->size; + ring->tail_mask = obj->size - 1; - dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset; - dev_priv->ring.map.size = obj->size; - dev_priv->ring.map.type = 0; - dev_priv->ring.map.flags = 0; - dev_priv->ring.map.mtrr = 0; + ring->map.offset = dev->agp->base + obj_priv->gtt_offset; + ring->map.size = obj->size; + ring->map.type = 0; + ring->map.flags = 0; + ring->map.mtrr = 0; - drm_core_ioremap_wc(&dev_priv->ring.map, dev); - if (dev_priv->ring.map.handle == NULL) { + drm_core_ioremap_wc(&ring->map, dev); + if (ring->map.handle == NULL) { DRM_ERROR("Failed to map ringbuffer.\n"); memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); drm_gem_object_unreference(obj); return -EINVAL; } - dev_priv->ring.ring_obj = obj; - dev_priv->ring.virtual_start = dev_priv->ring.map.handle; + ring->ring_obj = obj; + ring->virtual_start = ring->map.handle; /* Stop the ring if it's running. */ I915_WRITE(PRB0_CTL, 0); @@ -3128,12 +3158,20 @@ i915_gem_init_ringbuffer(struct drm_device *dev) } /* Update our cache of the ring state */ - i915_kernel_lost_context(dev); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + i915_kernel_lost_context(dev); + else { + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; + ring->space = ring->head - (ring->tail + 8); + if (ring->space < 0) + ring->space += ring->Size; + } return 0; } -static void +void i915_gem_cleanup_ringbuffer(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -3171,6 +3209,9 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, drm_i915_private_t *dev_priv = dev->dev_private; int ret; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return 0; + if (dev_priv->mm.wedged) { DRM_ERROR("Reenabling wedged hardware, good luck\n"); dev_priv->mm.wedged = 0; @@ -3204,6 +3245,9 @@ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, drm_i915_private_t *dev_priv = dev->dev_private; int ret; + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return 0; + ret = i915_gem_idle(dev); drm_irq_uninstall(dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9b673d2f912b..0cadafbef411 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -30,6 +30,7 @@ #include "drm.h" #include "i915_drm.h" #include "i915_drv.h" +#include "intel_drv.h" #define MAX_NOPID ((u32)~0) @@ -51,6 +52,15 @@ #define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \ I915_INTERRUPT_ENABLE_VAR) +#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\ + PIPE_VBLANK_INTERRUPT_STATUS) + +#define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\ + PIPE_VBLANK_INTERRUPT_ENABLE) + +#define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \ + DRM_I915_VBLANK_PIPE_B) + void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) { @@ -201,6 +211,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); pipea_stats = I915_READ(PIPEASTAT); pipeb_stats = I915_READ(PIPEBSTAT); + /* * Clear the PIPE(A|B)STAT regs before the IIR */ @@ -427,6 +438,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } +void i915_enable_interrupt (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + opregion_enable_asle(dev); + dev_priv->irq_enabled = 1; +} + + /* Set the vblank monitor pipe */ int i915_vblank_pipe_set(struct drm_device *dev, void *data, @@ -487,6 +506,8 @@ void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + atomic_set(&dev_priv->irq_received, 0); + I915_WRITE(HWSTAM, 0xeffe); I915_WRITE(PIPEASTAT, 0); I915_WRITE(PIPEBSTAT, 0); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c new file mode 100644 index 000000000000..4ca82a025525 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -0,0 +1,193 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_bios.h" + + +static void * +find_section(struct bdb_header *bdb, int section_id) +{ + u8 *base = (u8 *)bdb; + int index = 0; + u16 total, current_size; + u8 current_id; + + /* skip to first section */ + index += bdb->header_size; + total = bdb->bdb_size; + + /* walk the sections looking for section_id */ + while (index < total) { + current_id = *(base + index); + index++; + current_size = *((u16 *)(base + index)); + index += 2; + if (current_id == section_id) + return base + index; + index += current_size; + } + + return NULL; +} + +/* Try to find panel data */ +static void +parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +{ + struct bdb_lvds_options *lvds_options; + struct bdb_lvds_lfp_data *lvds_lfp_data; + struct bdb_lvds_lfp_data_entry *entry; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; + + /* Defaults if we can't find VBT info */ + dev_priv->lvds_dither = 0; + dev_priv->lvds_vbt = 0; + + lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); + if (!lvds_options) + return; + + dev_priv->lvds_dither = lvds_options->pixel_dither; + if (lvds_options->panel_type == 0xff) + return; + + lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); + if (!lvds_lfp_data) + return; + + dev_priv->lvds_vbt = 1; + + entry = &lvds_lfp_data->data[lvds_options->panel_type]; + dvo_timing = &entry->dvo_timing; + + panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), + DRM_MEM_DRIVER); + + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + drm_mode_set_name(panel_fixed_mode); + + dev_priv->vbt_mode = panel_fixed_mode; + + DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); + + return; +} + +static void +parse_general_features(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_general_features *general; + + /* Set sensible defaults in case we can't find the general block */ + dev_priv->int_tv_support = 1; + dev_priv->int_crt_support = 1; + + general = find_section(bdb, BDB_GENERAL_FEATURES); + if (general) { + dev_priv->int_tv_support = general->int_tv_support; + dev_priv->int_crt_support = general->int_crt_support; + } +} + +/** + * intel_init_bios - initialize VBIOS settings & find VBT + * @dev: DRM device + * + * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers + * to appropriate values. + * + * VBT existence is a sanity check that is relied on by other i830_bios.c code. + * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may + * feed an updated VBT back through that, compared to what we'll fetch using + * this method of groping around in the BIOS data. + * + * Returns 0 on success, nonzero on failure. + */ +bool +intel_init_bios(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct pci_dev *pdev = dev->pdev; + struct vbt_header *vbt = NULL; + struct bdb_header *bdb; + u8 __iomem *bios; + size_t size; + int i; + + bios = pci_map_rom(pdev, &size); + if (!bios) + return -1; + + /* Scour memory looking for the VBT signature */ + for (i = 0; i + 4 < size; i++) { + if (!memcmp(bios + i, "$VBT", 4)) { + vbt = (struct vbt_header *)(bios + i); + break; + } + } + + if (!vbt) { + DRM_ERROR("VBT signature missing\n"); + pci_unmap_rom(pdev, bios); + return -1; + } + + bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset); + + /* Grab useful general definitions */ + parse_general_features(dev_priv, bdb); + parse_panel_data(dev_priv, bdb); + + pci_unmap_rom(pdev, bios); + + return 0; +} diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h new file mode 100644 index 000000000000..5ea715ace3a0 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -0,0 +1,405 @@ +/* + * Copyright © 2006 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#ifndef _I830_BIOS_H_ +#define _I830_BIOS_H_ + +#include "drmP.h" + +struct vbt_header { + u8 signature[20]; /**< Always starts with 'VBT$' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 vbt_size; /**< in bytes */ + u8 vbt_checksum; + u8 reserved0; + u32 bdb_offset; /**< from beginning of VBT */ + u32 aim_offset[4]; /**< from beginning of VBT */ +} __attribute__((packed)); + +struct bdb_header { + u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */ + u16 version; /**< decimal */ + u16 header_size; /**< in bytes */ + u16 bdb_size; /**< in bytes */ +}; + +/* strictly speaking, this is a "skip" block, but it has interesting info */ +struct vbios_data { + u8 type; /* 0 == desktop, 1 == mobile */ + u8 relstage; + u8 chipset; + u8 lvds_present:1; + u8 tv_present:1; + u8 rsvd2:6; /* finish byte */ + u8 rsvd3[4]; + u8 signon[155]; + u8 copyright[61]; + u16 code_segment; + u8 dos_boot_mode; + u8 bandwidth_percent; + u8 rsvd4; /* popup memory size */ + u8 resize_pci_bios; + u8 rsvd5; /* is crt already on ddc2 */ +} __attribute__((packed)); + +/* + * There are several types of BIOS data blocks (BDBs), each block has + * an ID and size in the first 3 bytes (ID in first, size in next 2). + * Known types are listed below. + */ +#define BDB_GENERAL_FEATURES 1 +#define BDB_GENERAL_DEFINITIONS 2 +#define BDB_OLD_TOGGLE_LIST 3 +#define BDB_MODE_SUPPORT_LIST 4 +#define BDB_GENERIC_MODE_TABLE 5 +#define BDB_EXT_MMIO_REGS 6 +#define BDB_SWF_IO 7 +#define BDB_SWF_MMIO 8 +#define BDB_DOT_CLOCK_TABLE 9 +#define BDB_MODE_REMOVAL_TABLE 10 +#define BDB_CHILD_DEVICE_TABLE 11 +#define BDB_DRIVER_FEATURES 12 +#define BDB_DRIVER_PERSISTENCE 13 +#define BDB_EXT_TABLE_PTRS 14 +#define BDB_DOT_CLOCK_OVERRIDE 15 +#define BDB_DISPLAY_SELECT 16 +/* 17 rsvd */ +#define BDB_DRIVER_ROTATION 18 +#define BDB_DISPLAY_REMOVE 19 +#define BDB_OEM_CUSTOM 20 +#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ +#define BDB_SDVO_LVDS_OPTIONS 22 +#define BDB_SDVO_PANEL_DTDS 23 +#define BDB_SDVO_LVDS_PNP_IDS 24 +#define BDB_SDVO_LVDS_POWER_SEQ 25 +#define BDB_TV_OPTIONS 26 +#define BDB_LVDS_OPTIONS 40 +#define BDB_LVDS_LFP_DATA_PTRS 41 +#define BDB_LVDS_LFP_DATA 42 +#define BDB_LVDS_BACKLIGHT 43 +#define BDB_LVDS_POWER 44 +#define BDB_SKIP 254 /* VBIOS private block, ignore */ + +struct bdb_general_features { + /* bits 1 */ + u8 panel_fitting:2; + u8 flexaim:1; + u8 msg_enable:1; + u8 clear_screen:3; + u8 color_flip:1; + + /* bits 2 */ + u8 download_ext_vbt:1; + u8 enable_ssc:1; + u8 ssc_freq:1; + u8 enable_lfp_on_override:1; + u8 disable_ssc_ddt:1; + u8 rsvd8:3; /* finish byte */ + + /* bits 3 */ + u8 disable_smooth_vision:1; + u8 single_dvi:1; + u8 rsvd9:6; /* finish byte */ + + /* bits 4 */ + u8 legacy_monitor_detect; + + /* bits 5 */ + u8 int_crt_support:1; + u8 int_tv_support:1; + u8 rsvd11:6; /* finish byte */ +} __attribute__((packed)); + +struct bdb_general_definitions { + /* DDC GPIO */ + u8 crt_ddc_gmbus_pin; + + /* DPMS bits */ + u8 dpms_acpi:1; + u8 skip_boot_crt_detect:1; + u8 dpms_aim:1; + u8 rsvd1:5; /* finish byte */ + + /* boot device bits */ + u8 boot_display[2]; + u8 child_dev_size; + + /* device info */ + u8 tv_or_lvds_info[33]; + u8 dev1[33]; + u8 dev2[33]; + u8 dev3[33]; + u8 dev4[33]; + /* may be another device block here on some platforms */ +}; + +struct bdb_lvds_options { + u8 panel_type; + u8 rsvd1; + /* LVDS capabilities, stored in a dword */ + u8 rsvd2:1; + u8 lvds_edid:1; + u8 pixel_dither:1; + u8 pfit_ratio_auto:1; + u8 pfit_gfx_mode_enhanced:1; + u8 pfit_text_mode_enhanced:1; + u8 pfit_mode:2; + u8 rsvd4; +} __attribute__((packed)); + +/* LFP pointer table contains entries to the struct below */ +struct bdb_lvds_lfp_data_ptr { + u16 fp_timing_offset; /* offsets are from start of bdb */ + u8 fp_table_size; + u16 dvo_timing_offset; + u8 dvo_table_size; + u16 panel_pnp_id_offset; + u8 pnp_table_size; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data_ptrs { + u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */ + struct bdb_lvds_lfp_data_ptr ptr[16]; +} __attribute__((packed)); + +/* LFP data has 3 blocks per entry */ +struct lvds_fp_timing { + u16 x_res; + u16 y_res; + u32 lvds_reg; + u32 lvds_reg_val; + u32 pp_on_reg; + u32 pp_on_reg_val; + u32 pp_off_reg; + u32 pp_off_reg_val; + u32 pp_cycle_reg; + u32 pp_cycle_reg_val; + u32 pfit_reg; + u32 pfit_reg_val; + u16 terminator; +} __attribute__((packed)); + +struct lvds_dvo_timing { + u16 clock; /**< In 10khz */ + u8 hactive_lo; + u8 hblank_lo; + u8 hblank_hi:4; + u8 hactive_hi:4; + u8 vactive_lo; + u8 vblank_lo; + u8 vblank_hi:4; + u8 vactive_hi:4; + u8 hsync_off_lo; + u8 hsync_pulse_width; + u8 vsync_pulse_width:4; + u8 vsync_off:4; + u8 rsvd0:6; + u8 hsync_off_hi:2; + u8 h_image; + u8 v_image; + u8 max_hv; + u8 h_border; + u8 v_border; + u8 rsvd1:3; + u8 digital:2; + u8 vsync_positive:1; + u8 hsync_positive:1; + u8 rsvd2:1; +} __attribute__((packed)); + +struct lvds_pnp_id { + u16 mfg_name; + u16 product_code; + u32 serial; + u8 mfg_week; + u8 mfg_year; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data_entry { + struct lvds_fp_timing fp_timing; + struct lvds_dvo_timing dvo_timing; + struct lvds_pnp_id pnp_id; +} __attribute__((packed)); + +struct bdb_lvds_lfp_data { + struct bdb_lvds_lfp_data_entry data[16]; +} __attribute__((packed)); + +struct aimdb_header { + char signature[16]; + char oem_device[20]; + u16 aimdb_version; + u16 aimdb_header_size; + u16 aimdb_size; +} __attribute__((packed)); + +struct aimdb_block { + u8 aimdb_id; + u16 aimdb_size; +} __attribute__((packed)); + +struct vch_panel_data { + u16 fp_timing_offset; + u8 fp_timing_size; + u16 dvo_timing_offset; + u8 dvo_timing_size; + u16 text_fitting_offset; + u8 text_fitting_size; + u16 graphics_fitting_offset; + u8 graphics_fitting_size; +} __attribute__((packed)); + +struct vch_bdb_22 { + struct aimdb_block aimdb_block; + struct vch_panel_data panels[16]; +} __attribute__((packed)); + +bool intel_init_bios(struct drm_device *dev); + +/* + * Driver<->VBIOS interaction occurs through scratch bits in + * GR18 & SWF*. + */ + +/* GR18 bits are set on display switch and hotkey events */ +#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ +#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ +#define GR18_HK_NONE (0x0<<3) +#define GR18_HK_LFP_STRETCH (0x1<<3) +#define GR18_HK_TOGGLE_DISP (0x2<<3) +#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ +#define GR18_HK_POPUP_DISABLED (0x6<<3) +#define GR18_HK_POPUP_ENABLED (0x7<<3) +#define GR18_HK_PFIT (0x8<<3) +#define GR18_HK_APM_CHANGE (0xa<<3) +#define GR18_HK_MULTIPLE (0xc<<3) +#define GR18_USER_INT_EN (1<<2) +#define GR18_A0000_FLUSH_EN (1<<1) +#define GR18_SMM_EN (1<<0) + +/* Set by driver, cleared by VBIOS */ +#define SWF00_YRES_SHIFT 16 +#define SWF00_XRES_SHIFT 0 +#define SWF00_RES_MASK 0xffff + +/* Set by VBIOS at boot time and driver at runtime */ +#define SWF01_TV2_FORMAT_SHIFT 8 +#define SWF01_TV1_FORMAT_SHIFT 0 +#define SWF01_TV_FORMAT_MASK 0xffff + +#define SWF10_VBIOS_BLC_I2C_EN (1<<29) +#define SWF10_GTT_OVERRIDE_EN (1<<28) +#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ +#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) +#define SWF10_OLD_TOGGLE 0x0 +#define SWF10_TOGGLE_LIST_1 0x1 +#define SWF10_TOGGLE_LIST_2 0x2 +#define SWF10_TOGGLE_LIST_3 0x3 +#define SWF10_TOGGLE_LIST_4 0x4 +#define SWF10_PANNING_EN (1<<23) +#define SWF10_DRIVER_LOADED (1<<22) +#define SWF10_EXTENDED_DESKTOP (1<<21) +#define SWF10_EXCLUSIVE_MODE (1<<20) +#define SWF10_OVERLAY_EN (1<<19) +#define SWF10_PLANEB_HOLDOFF (1<<18) +#define SWF10_PLANEA_HOLDOFF (1<<17) +#define SWF10_VGA_HOLDOFF (1<<16) +#define SWF10_ACTIVE_DISP_MASK 0xffff +#define SWF10_PIPEB_LFP2 (1<<15) +#define SWF10_PIPEB_EFP2 (1<<14) +#define SWF10_PIPEB_TV2 (1<<13) +#define SWF10_PIPEB_CRT2 (1<<12) +#define SWF10_PIPEB_LFP (1<<11) +#define SWF10_PIPEB_EFP (1<<10) +#define SWF10_PIPEB_TV (1<<9) +#define SWF10_PIPEB_CRT (1<<8) +#define SWF10_PIPEA_LFP2 (1<<7) +#define SWF10_PIPEA_EFP2 (1<<6) +#define SWF10_PIPEA_TV2 (1<<5) +#define SWF10_PIPEA_CRT2 (1<<4) +#define SWF10_PIPEA_LFP (1<<3) +#define SWF10_PIPEA_EFP (1<<2) +#define SWF10_PIPEA_TV (1<<1) +#define SWF10_PIPEA_CRT (1<<0) + +#define SWF11_MEMORY_SIZE_SHIFT 16 +#define SWF11_SV_TEST_EN (1<<15) +#define SWF11_IS_AGP (1<<14) +#define SWF11_DISPLAY_HOLDOFF (1<<13) +#define SWF11_DPMS_REDUCED (1<<12) +#define SWF11_IS_VBE_MODE (1<<11) +#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ +#define SWF11_DPMS_MASK 0x07 +#define SWF11_DPMS_OFF (1<<2) +#define SWF11_DPMS_SUSPEND (1<<1) +#define SWF11_DPMS_STANDBY (1<<0) +#define SWF11_DPMS_ON 0 + +#define SWF14_GFX_PFIT_EN (1<<31) +#define SWF14_TEXT_PFIT_EN (1<<30) +#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */ +#define SWF14_POPUP_EN (1<<28) +#define SWF14_DISPLAY_HOLDOFF (1<<27) +#define SWF14_DISP_DETECT_EN (1<<26) +#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ +#define SWF14_DRIVER_STATUS (1<<24) +#define SWF14_OS_TYPE_WIN9X (1<<23) +#define SWF14_OS_TYPE_WINNT (1<<22) +/* 21:19 rsvd */ +#define SWF14_PM_TYPE_MASK 0x00070000 +#define SWF14_PM_ACPI_VIDEO (0x4 << 16) +#define SWF14_PM_ACPI (0x3 << 16) +#define SWF14_PM_APM_12 (0x2 << 16) +#define SWF14_PM_APM_11 (0x1 << 16) +#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ + /* if GR18 indicates a display switch */ +#define SWF14_DS_PIPEB_LFP2_EN (1<<15) +#define SWF14_DS_PIPEB_EFP2_EN (1<<14) +#define SWF14_DS_PIPEB_TV2_EN (1<<13) +#define SWF14_DS_PIPEB_CRT2_EN (1<<12) +#define SWF14_DS_PIPEB_LFP_EN (1<<11) +#define SWF14_DS_PIPEB_EFP_EN (1<<10) +#define SWF14_DS_PIPEB_TV_EN (1<<9) +#define SWF14_DS_PIPEB_CRT_EN (1<<8) +#define SWF14_DS_PIPEA_LFP2_EN (1<<7) +#define SWF14_DS_PIPEA_EFP2_EN (1<<6) +#define SWF14_DS_PIPEA_TV2_EN (1<<5) +#define SWF14_DS_PIPEA_CRT2_EN (1<<4) +#define SWF14_DS_PIPEA_LFP_EN (1<<3) +#define SWF14_DS_PIPEA_EFP_EN (1<<2) +#define SWF14_DS_PIPEA_TV_EN (1<<1) +#define SWF14_DS_PIPEA_CRT_EN (1<<0) + /* if GR18 indicates a panel fitting request */ +#define SWF14_PFIT_EN (1<<0) /* 0 means disable */ + /* if GR18 indicates an APM change request */ +#define SWF14_APM_HIBERNATE 0x4 +#define SWF14_APM_SUSPEND 0x3 +#define SWF14_APM_STANDBY 0x1 +#define SWF14_APM_RESTORE 0x0 + +#endif /* _I830_BIOS_H_ */ diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c new file mode 100644 index 000000000000..5d9c94eb7055 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -0,0 +1,284 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_crtc_helper.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +static void intel_crt_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 temp; + + temp = I915_READ(ADPA); + temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); + temp &= ~ADPA_DAC_ENABLE; + + switch(mode) { + case DRM_MODE_DPMS_ON: + temp |= ADPA_DAC_ENABLE; + break; + case DRM_MODE_DPMS_STANDBY: + temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; + break; + case DRM_MODE_DPMS_SUSPEND: + temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + case DRM_MODE_DPMS_OFF: + temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; + break; + } + + I915_WRITE(ADPA, temp); +} + +static int intel_crt_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (mode->clock > 400000 || mode->clock < 25000) + return MODE_CLOCK_RANGE; + + return MODE_OK; +} + +static bool intel_crt_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static void intel_crt_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_i915_private *dev_priv = dev->dev_private; + int dpll_md_reg; + u32 adpa, dpll_md; + + if (intel_crtc->pipe == 0) + dpll_md_reg = DPLL_A_MD; + else + dpll_md_reg = DPLL_B_MD; + + /* + * Disable separate mode multiplier used when cloning SDVO to CRT + * XXX this needs to be adjusted when we really are cloning + */ + if (IS_I965G(dev)) { + dpll_md = I915_READ(dpll_md_reg); + I915_WRITE(dpll_md_reg, + dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); + } + + adpa = 0; + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + adpa |= ADPA_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + adpa |= ADPA_VSYNC_ACTIVE_HIGH; + + if (intel_crtc->pipe == 0) + adpa |= ADPA_PIPE_A_SELECT; + else + adpa |= ADPA_PIPE_B_SELECT; + + I915_WRITE(ADPA, adpa); +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence. + * + * Not for i915G/i915GM + * + * \return true if CRT is connected. + * \return false if CRT is disconnected. + */ +static bool intel_crt_detect_hotplug(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 temp; + + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + temp = I915_READ(PORT_HOTPLUG_EN); + + I915_WRITE(PORT_HOTPLUG_EN, + temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5)); + + do { + if (!(I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT)) + break; + msleep(1); + } while (time_after(timeout, jiffies)); + + if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) == + CRT_HOTPLUG_MONITOR_COLOR) + return true; + + return false; +} + +static bool intel_crt_detect_ddc(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* CRT should always be at 0, but check anyway */ + if (intel_output->type != INTEL_OUTPUT_ANALOG) + return false; + + return intel_ddc_probe(intel_output); +} + +static enum drm_connector_status intel_crt_detect(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + + if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { + if (intel_crt_detect_hotplug(connector)) + return connector_status_connected; + else + return connector_status_disconnected; + } + + if (intel_crt_detect_ddc(connector)) + return connector_status_connected; + + /* TODO use load detect */ + return connector_status_unknown; +} + +static void intel_crt_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static int intel_crt_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + return intel_ddc_get_modes(intel_output); +} + +static int intel_crt_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_device *dev = connector->dev; + + if (property == dev->mode_config.dpms_property && connector->encoder) + intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf)); + + return 0; +} + +/* + * Routines for controlling stuff on the analog port + */ + +static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { + .dpms = intel_crt_dpms, + .mode_fixup = intel_crt_mode_fixup, + .prepare = intel_encoder_prepare, + .commit = intel_encoder_commit, + .mode_set = intel_crt_mode_set, +}; + +static const struct drm_connector_funcs intel_crt_connector_funcs = { + .detect = intel_crt_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_crt_destroy, + .set_property = intel_crt_set_property, +}; + +static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = { + .mode_valid = intel_crt_mode_valid, + .get_modes = intel_crt_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_crt_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_crt_enc_funcs = { + .destroy = intel_crt_enc_destroy, +}; + +void intel_crt_init(struct drm_device *dev) +{ + struct drm_connector *connector; + struct intel_output *intel_output; + + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) + return; + + connector = &intel_output->base; + drm_connector_init(dev, &intel_output->base, + &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); + + drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs, + DRM_MODE_ENCODER_DAC); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + return; + } + + intel_output->type = INTEL_OUTPUT_ANALOG; + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs); + drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); + + drm_sysfs_connector_add(connector); +} diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c new file mode 100644 index 000000000000..96c2da5b74e3 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_display.c @@ -0,0 +1,1621 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#include "drm_crtc_helper.h" + +bool intel_pipe_has_type (struct drm_crtc *crtc, int type); + +typedef struct { + /* given values */ + int n; + int m1, m2; + int p1, p2; + /* derived values */ + int dot; + int vco; + int m; + int p; +} intel_clock_t; + +typedef struct { + int min, max; +} intel_range_t; + +typedef struct { + int dot_limit; + int p2_slow, p2_fast; +} intel_p2_t; + +#define INTEL_P2_NUM 2 + +typedef struct { + intel_range_t dot, vco, n, m, m1, m2, p, p1; + intel_p2_t p2; +} intel_limit_t; + +#define I8XX_DOT_MIN 25000 +#define I8XX_DOT_MAX 350000 +#define I8XX_VCO_MIN 930000 +#define I8XX_VCO_MAX 1400000 +#define I8XX_N_MIN 3 +#define I8XX_N_MAX 16 +#define I8XX_M_MIN 96 +#define I8XX_M_MAX 140 +#define I8XX_M1_MIN 18 +#define I8XX_M1_MAX 26 +#define I8XX_M2_MIN 6 +#define I8XX_M2_MAX 16 +#define I8XX_P_MIN 4 +#define I8XX_P_MAX 128 +#define I8XX_P1_MIN 2 +#define I8XX_P1_MAX 33 +#define I8XX_P1_LVDS_MIN 1 +#define I8XX_P1_LVDS_MAX 6 +#define I8XX_P2_SLOW 4 +#define I8XX_P2_FAST 2 +#define I8XX_P2_LVDS_SLOW 14 +#define I8XX_P2_LVDS_FAST 14 /* No fast option */ +#define I8XX_P2_SLOW_LIMIT 165000 + +#define I9XX_DOT_MIN 20000 +#define I9XX_DOT_MAX 400000 +#define I9XX_VCO_MIN 1400000 +#define I9XX_VCO_MAX 2800000 +#define I9XX_N_MIN 3 +#define I9XX_N_MAX 8 +#define I9XX_M_MIN 70 +#define I9XX_M_MAX 120 +#define I9XX_M1_MIN 10 +#define I9XX_M1_MAX 20 +#define I9XX_M2_MIN 5 +#define I9XX_M2_MAX 9 +#define I9XX_P_SDVO_DAC_MIN 5 +#define I9XX_P_SDVO_DAC_MAX 80 +#define I9XX_P_LVDS_MIN 7 +#define I9XX_P_LVDS_MAX 98 +#define I9XX_P1_MIN 1 +#define I9XX_P1_MAX 8 +#define I9XX_P2_SDVO_DAC_SLOW 10 +#define I9XX_P2_SDVO_DAC_FAST 5 +#define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 +#define I9XX_P2_LVDS_SLOW 14 +#define I9XX_P2_LVDS_FAST 7 +#define I9XX_P2_LVDS_SLOW_LIMIT 112000 + +#define INTEL_LIMIT_I8XX_DVO_DAC 0 +#define INTEL_LIMIT_I8XX_LVDS 1 +#define INTEL_LIMIT_I9XX_SDVO_DAC 2 +#define INTEL_LIMIT_I9XX_LVDS 3 + +static const intel_limit_t intel_limits[] = { + { /* INTEL_LIMIT_I8XX_DVO_DAC */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, + }, + { /* INTEL_LIMIT_I8XX_LVDS */ + .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, + .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, + .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, + .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, + .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, + .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, + .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, + .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, + .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, + .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, + }, + { /* INTEL_LIMIT_I9XX_SDVO_DAC */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, + .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, + }, + { /* INTEL_LIMIT_I9XX_LVDS */ + .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, + .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, + .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, + .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, + .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, + .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, + .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, + .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, + /* The single-channel range is 25-112Mhz, and dual-channel + * is 80-224Mhz. Prefer single channel as much as possible. + */ + .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, + .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, + }, +}; + +static const intel_limit_t *intel_limit(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + const intel_limit_t *limit; + + if (IS_I9XX(dev)) { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; + } else { + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) + limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; + else + limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; + } + return limit; +} + +/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ + +static void i8xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ + +static void i9xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + clock->p = clock->p1 * clock->p2; + clock->vco = refclk * clock->m / (clock->n + 2); + clock->dot = clock->vco / clock->p; +} + +static void intel_clock(struct drm_device *dev, int refclk, + intel_clock_t *clock) +{ + if (IS_I9XX(dev)) + return i9xx_clock (refclk, clock); + else + return i8xx_clock (refclk, clock); +} + +/** + * Returns whether any output on the specified pipe is of the specified type + */ +bool intel_pipe_has_type (struct drm_crtc *crtc, int type) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *l_entry; + + list_for_each_entry(l_entry, &mode_config->connector_list, head) { + if (l_entry->encoder && + l_entry->encoder->crtc == crtc) { + struct intel_output *intel_output = to_intel_output(l_entry); + if (intel_output->type == type) + return true; + } + } + return false; +} + +#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +/** + * Returns whether the given set of divisors are valid for a given refclk with + * the given connectors. + */ + +static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock) +{ + const intel_limit_t *limit = intel_limit (crtc); + + if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) + INTELPllInvalid ("p1 out of range\n"); + if (clock->p < limit->p.min || limit->p.max < clock->p) + INTELPllInvalid ("p out of range\n"); + if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) + INTELPllInvalid ("m2 out of range\n"); + if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) + INTELPllInvalid ("m1 out of range\n"); + if (clock->m1 <= clock->m2) + INTELPllInvalid ("m1 <= m2\n"); + if (clock->m < limit->m.min || limit->m.max < clock->m) + INTELPllInvalid ("m out of range\n"); + if (clock->n < limit->n.min || limit->n.max < clock->n) + INTELPllInvalid ("n out of range\n"); + if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) + INTELPllInvalid ("vco out of range\n"); + /* XXX: We may need to be checking "Dot clock" depending on the multiplier, + * connector, etc., rather than just a single range. + */ + if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) + INTELPllInvalid ("dot out of range\n"); + + return true; +} + +/** + * Returns a set of divisors for the desired target clock with the given + * refclk, or FALSE. The returned values represent the clock equation: + * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. + */ +static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, + int refclk, intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + intel_clock_t clock; + const intel_limit_t *limit = intel_limit(crtc); + int err = target; + + if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + (I915_READ(LVDS) & LVDS_PORT_EN) != 0) { + /* + * For LVDS, if the panel is on, just rely on its current + * settings for dual-channel. We haven't figured out how to + * reliably set up different single/dual channel state, if we + * even can. + */ + if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == + LVDS_CLKB_POWER_UP) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset (best_clock, 0, sizeof (*best_clock)); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { + for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; + clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + intel_clock(dev, refclk, &clock); + + if (!intel_PLL_is_valid(crtc, &clock)) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +void +intel_wait_for_vblank(struct drm_device *dev) +{ + /* Wait for 20ms, i.e. one cycle at 50hz. */ + udelay(20000); +} + +void +intel_pipe_set_base(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_master_private *master_priv; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + struct drm_i915_gem_object *obj_priv; + struct drm_gem_object *obj; + int pipe = intel_crtc->pipe; + unsigned long Start, Offset; + int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR); + int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); + int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + u32 dspcntr; + + /* no fb bound */ + if (!crtc->fb) { + DRM_DEBUG("No FB bound\n"); + return; + } + + intel_fb = to_intel_framebuffer(crtc->fb); + + obj = intel_fb->obj; + obj_priv = obj->driver_private; + + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + + I915_WRITE(dspstride, crtc->fb->pitch); + + dspcntr = I915_READ(dspcntr_reg); + switch (crtc->fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (crtc->fb->depth == 15) + dspcntr |= DISPPLANE_15_16BPP; + else + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + break; + default: + DRM_ERROR("Unknown color depth\n"); + return; + } + I915_WRITE(dspcntr_reg, dspcntr); + + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + if (IS_I965G(dev)) { + I915_WRITE(dspbase, Offset); + I915_READ(dspbase); + I915_WRITE(dspsurf, Start); + I915_READ(dspsurf); + } else { + I915_WRITE(dspbase, Start + Offset); + I915_READ(dspbase); + } + + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + switch (pipe) { + case 0: + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; + break; + case 1: + master_priv->sarea_priv->pipeB_x = x; + master_priv->sarea_priv->pipeB_y = y; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } +} + + + +/** + * Sets the power management mode of the pipe and plane. + * + * This code should probably grow support for turning the cursor off and back + * on appropriately at the same time as we're turning the pipe off/on. + */ +static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_master_private *master_priv; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + u32 temp; + bool enabled; + + /* XXX: When our outputs are all unaware of DPMS modes other than off + * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + /* Enable the DPLL */ + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) == 0) { + I915_WRITE(dpll_reg, temp); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) == 0) + I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE); + + /* Enable the plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + intel_crtc_load_lut(crtc); + + /* Give the overlay scaler a chance to enable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, true); TODO + break; + case DRM_MODE_DPMS_OFF: + /* Give the overlay scaler a chance to disable if it's on this pipe */ + //intel_crtc_dpms_video(crtc, FALSE); TODO + + /* Disable the VGA plane that we never use */ + I915_WRITE(VGACNTRL, VGA_DISP_DISABLE); + + /* Disable display plane */ + temp = I915_READ(dspcntr_reg); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + I915_READ(dspbase_reg); + } + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + /* Next, disable display pipes */ + temp = I915_READ(pipeconf_reg); + if ((temp & PIPEACONF_ENABLE) != 0) { + I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); + I915_READ(pipeconf_reg); + } + + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + temp = I915_READ(dpll_reg); + if ((temp & DPLL_VCO_ENABLE) != 0) { + I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + } + + /* Wait for the clocks to turn off. */ + udelay(150); + break; + } + + if (!dev->primary->master) + return; + + master_priv = dev->primary->master->driver_priv; + if (!master_priv->sarea_priv) + return; + + enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; + + switch (pipe) { + case 0: + master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; + break; + case 1: + master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; + master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + break; + } + + intel_crtc->dpms_mode = mode; +} + +static void intel_crtc_prepare (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void intel_crtc_commit (struct drm_crtc *crtc) +{ + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); +} + +void intel_encoder_prepare (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of prepare see intel_lvds_prepare */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); +} + +void intel_encoder_commit (struct drm_encoder *encoder) +{ + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + /* lvds has its own version of commit see intel_lvds_commit */ + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); +} + +static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + + +/** Returns the core display clock speed for i830 - i945 */ +static int intel_get_core_clock_speed(struct drm_device *dev) +{ + + /* Core clock values taken from the published datasheets. + * The 830 may go up to 166 Mhz, which we should check. + */ + if (IS_I945G(dev)) + return 400000; + else if (IS_I915G(dev)) + return 333000; + else if (IS_I945GM(dev) || IS_845G(dev)) + return 200000; + else if (IS_I915GM(dev)) { + u16 gcfgc = 0; + + pci_read_config_word(dev->pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) + return 133000; + else { + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_MHZ: + return 333000; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + return 190000; + } + } + } else if (IS_I865G(dev)) + return 266000; + else if (IS_I855(dev)) { + u16 hpllcc = 0; + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & GC_CLOCK_CONTROL_MASK) { + case GC_CLOCK_133_200: + case GC_CLOCK_100_200: + return 200000; + case GC_CLOCK_166_250: + return 250000; + case GC_CLOCK_100_133: + return 133000; + } + } else /* 852, 830 */ + return 133000; + + return 0; /* Silence gcc warning */ +} + + +/** + * Return the pipe currently connected to the panel fitter, + * or -1 if the panel fitter is not present or not in use + */ +static int intel_panel_fitter_pipe (struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pfit_control; + + /* i830 doesn't have a panel fitter */ + if (IS_I830(dev)) + return -1; + + pfit_control = I915_READ(PFIT_CONTROL); + + /* See if the panel fitter is in use */ + if ((pfit_control & PFIT_ENABLE) == 0) + return -1; + + /* 965 can place panel fitter on either pipe */ + if (IS_I965G(dev)) + return (pfit_control >> 29) & 0x3; + + /* older chips can only use pipe 1 */ + return 1; +} + +static void intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int fp_reg = (pipe == 0) ? FPA0 : FPB0; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; + int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; + int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; + int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; + int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; + int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; + int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; + int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; + int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; + int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; + int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; + int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; + int refclk; + intel_clock_t clock; + u32 dpll = 0, fp = 0, dspcntr, pipeconf; + bool ok, is_sdvo = false, is_dvo = false; + bool is_crt = false, is_lvds = false, is_tv = false; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector; + + drm_vblank_pre_modeset(dev, pipe); + + list_for_each_entry(connector, &mode_config->connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + + switch (intel_output->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_SDVO: + is_sdvo = true; + break; + case INTEL_OUTPUT_DVO: + is_dvo = true; + break; + case INTEL_OUTPUT_TVOUT: + is_tv = true; + break; + case INTEL_OUTPUT_ANALOG: + is_crt = true; + break; + } + } + + if (IS_I9XX(dev)) { + refclk = 96000; + } else { + refclk = 48000; + } + + ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return; + } + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + + dpll = DPLL_VGA_MODE_DIS; + if (IS_I9XX(dev)) { + if (is_lvds) + dpll |= DPLLB_MODE_LVDS; + else + dpll |= DPLLB_MODE_DAC_SERIAL; + if (is_sdvo) { + dpll |= DPLL_DVO_HIGH_SPEED; + if (IS_I945G(dev) || IS_I945GM(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; + } + } + + /* compute bitmask from p1 value */ + dpll |= (1 << (clock.p1 - 1)) << 16; + switch (clock.p2) { + case 5: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; + break; + case 7: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; + break; + case 10: + dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; + break; + case 14: + dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; + break; + } + if (IS_I965G(dev)) + dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); + } else { + if (is_lvds) { + dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + } else { + if (clock.p1 == 2) + dpll |= PLL_P1_DIVIDE_BY_TWO; + else + dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; + if (clock.p2 == 4) + dpll |= PLL_P2_DIVIDE_BY_4; + } + } + + if (is_tv) { + /* XXX: just matching BIOS for now */ +/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + dpll |= 3; + } + else + dpll |= PLL_REF_INPUT_DREFCLK; + + /* setup pipeconf */ + pipeconf = I915_READ(pipeconf_reg); + + /* Set up the display plane register */ + dspcntr = DISPPLANE_GAMMA_ENABLE; + + if (pipe == 0) + dspcntr |= DISPPLANE_SEL_PIPE_A; + else + dspcntr |= DISPPLANE_SEL_PIPE_B; + + if (pipe == 0 && !IS_I965G(dev)) { + /* Enable pixel doubling when the dot clock is > 90% of the (display) + * core speed. + * + * XXX: No double-wide on 915GM pipe B. Is that the only reason for the + * pipe == 0 check? + */ + if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10) + pipeconf |= PIPEACONF_DOUBLE_WIDE; + else + pipeconf &= ~PIPEACONF_DOUBLE_WIDE; + } + + dspcntr |= DISPLAY_PLANE_ENABLE; + pipeconf |= PIPEACONF_ENABLE; + dpll |= DPLL_VCO_ENABLE; + + + /* Disable the panel fitter if it was on our pipe */ + if (intel_panel_fitter_pipe(dev) == pipe) + I915_WRITE(PFIT_CONTROL, 0); + + DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); + drm_mode_debug_printmodeline(mode); + + + if (dpll & DPLL_VCO_ENABLE) { + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); + I915_READ(dpll_reg); + udelay(150); + } + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + u32 lvds = I915_READ(LVDS); + + lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + + I915_WRITE(LVDS, lvds); + I915_READ(LVDS); + } + + I915_WRITE(fp_reg, fp); + I915_WRITE(dpll_reg, dpll); + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + if (IS_I965G(dev)) { + int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; + I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | + ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); + } else { + /* write it again -- the BIOS does, after all */ + I915_WRITE(dpll_reg, dpll); + } + I915_READ(dpll_reg); + /* Wait for the clocks to stabilize. */ + udelay(150); + + I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16)); + I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16)); + I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16)); + I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16)); + I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16)); + I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16)); + /* pipesrc and dspsize control the size that is scaled from, which should + * always be the user's requested size. + */ + I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); + I915_WRITE(dsppos_reg, 0); + I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); + I915_WRITE(pipeconf_reg, pipeconf); + I915_READ(pipeconf_reg); + + intel_wait_for_vblank(dev); + + I915_WRITE(dspcntr_reg, dspcntr); + + /* Flush the plane changes */ + intel_pipe_set_base(crtc, x, y); + + intel_wait_for_vblank(dev); + + drm_vblank_post_modeset(dev, pipe); +} + +/** Loads the palette/gamma unit for the CRTC with the prepared values */ +void intel_crtc_load_lut(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; + int i; + + /* The clocks have to be on to load the palette. */ + if (!crtc->enabled) + return; + + for (i = 0; i < 256; i++) { + I915_WRITE(palreg + 4 * i, + (intel_crtc->lut_r[i] << 16) | + (intel_crtc->lut_g[i] << 8) | + intel_crtc->lut_b[i]); + } +} + +static int intel_crtc_cursor_set(struct drm_crtc *crtc, + struct drm_file *file_priv, + uint32_t handle, + uint32_t width, uint32_t height) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_gem_object *bo; + struct drm_i915_gem_object *obj_priv; + int pipe = intel_crtc->pipe; + uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; + uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; + uint32_t temp; + size_t addr; + + DRM_DEBUG("\n"); + + /* if we want to turn off the cursor ignore width and height */ + if (!handle) { + DRM_DEBUG("cursor off\n"); + /* turn of the cursor */ + temp = 0; + temp |= CURSOR_MODE_DISABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, 0); + return 0; + } + + /* Currently we only support 64x64 cursors */ + if (width != 64 || height != 64) { + DRM_ERROR("we currently only support 64x64 cursors\n"); + return -EINVAL; + } + + bo = drm_gem_object_lookup(dev, file_priv, handle); + if (!bo) + return -ENOENT; + + obj_priv = bo->driver_private; + + if (bo->size < width * height * 4) { + DRM_ERROR("buffer is to small\n"); + drm_gem_object_unreference(bo); + return -ENOMEM; + } + + if (dev_priv->cursor_needs_physical) { + addr = dev->agp->base + obj_priv->gtt_offset; + } else { + addr = obj_priv->gtt_offset; + } + + intel_crtc->cursor_addr = addr; + temp = 0; + /* set the pipe for the cursor */ + temp |= (pipe << 28); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + + I915_WRITE(control, temp); + I915_WRITE(base, addr); + + return 0; +} + +static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + uint32_t temp = 0; + uint32_t adder; + + if (x < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); + x = -x; + } + if (y < 0) { + temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); + y = -y; + } + + temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); + temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); + + adder = intel_crtc->cursor_addr; + I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); + I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder); + + return 0; +} + +/** Sets the color ramps on behalf of RandR */ +void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + intel_crtc->lut_r[regno] = red >> 8; + intel_crtc->lut_g[regno] = green >> 8; + intel_crtc->lut_b[regno] = blue >> 8; +} + +static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, uint32_t size) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int i; + + if (size != 256) + return; + + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = red[i] >> 8; + intel_crtc->lut_g[i] = green[i] >> 8; + intel_crtc->lut_b[i] = blue[i] >> 8; + } + + intel_crtc_load_lut(crtc); +} + +/** + * Get a pipe with a simple mode set on it for doing load-based monitor + * detection. + * + * It will be up to the load-detect code to adjust the pipe as appropriate for + * its requirements. The pipe will be connected to no other outputs. + * + * Currently this code will only succeed if there is a pipe with no outputs + * configured for it. In the future, it could choose to temporarily disable + * some outputs to free up a pipe for its use. + * + * \return crtc, or NULL if no pipes are available. + */ + +/* VESA 640x480x72Hz mode to set on the pipe */ +static struct drm_display_mode load_detect_mode = { + DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, + 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), +}; + +struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, + struct drm_display_mode *mode, + int *dpms_mode) +{ + struct intel_crtc *intel_crtc; + struct drm_crtc *possible_crtc; + struct drm_crtc *supported_crtc =NULL; + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc = NULL; + struct drm_device *dev = encoder->dev; + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + struct drm_crtc_helper_funcs *crtc_funcs; + int i = -1; + + /* + * Algorithm gets a little messy: + * - if the connector already has an assigned crtc, use it (but make + * sure it's on first) + * - try to find the first unused crtc that can drive this connector, + * and use that if we find one + * - if there are no unused crtcs available, try to use the first + * one we found that supports the connector + */ + + /* See if we already have a CRTC for this connector */ + if (encoder->crtc) { + crtc = encoder->crtc; + /* Make sure the crtc and connector are running */ + intel_crtc = to_intel_crtc(crtc); + *dpms_mode = intel_crtc->dpms_mode; + if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { + crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); + } + return crtc; + } + + /* Find an unused one (if possible) */ + list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { + i++; + if (!(encoder->possible_crtcs & (1 << i))) + continue; + if (!possible_crtc->enabled) { + crtc = possible_crtc; + break; + } + if (!supported_crtc) + supported_crtc = possible_crtc; + } + + /* + * If we didn't find an unused CRTC, don't use any. + */ + if (!crtc) { + return NULL; + } + + encoder->crtc = crtc; + intel_output->load_detect_temp = true; + + intel_crtc = to_intel_crtc(crtc); + *dpms_mode = intel_crtc->dpms_mode; + + if (!crtc->enabled) { + if (!mode) + mode = &load_detect_mode; + drm_crtc_helper_set_mode(crtc, mode, 0, 0); + } else { + if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { + crtc_funcs = crtc->helper_private; + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); + } + + /* Add this connector to the crtc */ + encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode); + encoder_funcs->commit(encoder); + } + /* let the connector get through one full cycle before testing */ + intel_wait_for_vblank(dev); + + return crtc; +} + +void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_crtc *crtc = encoder->crtc; + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + if (intel_output->load_detect_temp) { + encoder->crtc = NULL; + intel_output->load_detect_temp = false; + crtc->enabled = drm_helper_crtc_in_use(crtc); + drm_helper_disable_unused_functions(dev); + } + + /* Switch crtc and output back off if necessary */ + if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) { + if (encoder->crtc == crtc) + encoder_funcs->dpms(encoder, dpms_mode); + crtc_funcs->dpms(crtc, dpms_mode); + } +} + +/* Returns the clock of the currently programmed mode of the given pipe. */ +static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B); + u32 fp; + intel_clock_t clock; + + if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) + fp = I915_READ((pipe == 0) ? FPA0 : FPB0); + else + fp = I915_READ((pipe == 0) ? FPA1 : FPB1); + + clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; + clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; + clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; + if (IS_I9XX(dev)) { + clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + + switch (dpll & DPLL_MODE_MASK) { + case DPLLB_MODE_DAC_SERIAL: + clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? + 5 : 10; + break; + case DPLLB_MODE_LVDS: + clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? + 7 : 14; + break; + default: + DRM_DEBUG("Unknown DPLL mode %08x in programmed " + "mode\n", (int)(dpll & DPLL_MODE_MASK)); + return 0; + } + + /* XXX: Handle the 100Mhz refclk */ + i9xx_clock(96000, &clock); + } else { + bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); + + if (is_lvds) { + clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> + DPLL_FPA01_P1_POST_DIV_SHIFT); + clock.p2 = 14; + + if ((dpll & PLL_REF_INPUT_MASK) == + PLLB_REF_INPUT_SPREADSPECTRUMIN) { + /* XXX: might not be 66MHz */ + i8xx_clock(66000, &clock); + } else + i8xx_clock(48000, &clock); + } else { + if (dpll & PLL_P1_DIVIDE_BY_TWO) + clock.p1 = 2; + else { + clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> + DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; + } + if (dpll & PLL_P2_DIVIDE_BY_4) + clock.p2 = 4; + else + clock.p2 = 2; + + i8xx_clock(48000, &clock); + } + } + + /* XXX: It would be nice to validate the clocks, but we can't reuse + * i830PllIsValid() because it relies on the xf86_config connector + * configuration being accurate, which it isn't necessarily. + */ + + return clock.dot; +} + +/** Returns the currently programmed mode of the given pipe. */ +struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + struct drm_display_mode *mode; + int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); + int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B); + int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); + int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B); + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + mode->clock = intel_crtc_clock_get(dev, crtc); + mode->hdisplay = (htot & 0xffff) + 1; + mode->htotal = ((htot & 0xffff0000) >> 16) + 1; + mode->hsync_start = (hsync & 0xffff) + 1; + mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; + mode->vdisplay = (vtot & 0xffff) + 1; + mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; + mode->vsync_start = (vsync & 0xffff) + 1; + mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + return mode; +} + +static void intel_crtc_destroy(struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + drm_crtc_cleanup(crtc); + kfree(intel_crtc); +} + +static const struct drm_crtc_helper_funcs intel_helper_funcs = { + .dpms = intel_crtc_dpms, + .mode_fixup = intel_crtc_mode_fixup, + .mode_set = intel_crtc_mode_set, + .mode_set_base = intel_pipe_set_base, + .prepare = intel_crtc_prepare, + .commit = intel_crtc_commit, +}; + +static const struct drm_crtc_funcs intel_crtc_funcs = { + .cursor_set = intel_crtc_cursor_set, + .cursor_move = intel_crtc_cursor_move, + .gamma_set = intel_crtc_gamma_set, + .set_config = drm_crtc_helper_set_config, + .destroy = intel_crtc_destroy, +}; + + +void intel_crtc_init(struct drm_device *dev, int pipe) +{ + struct intel_crtc *intel_crtc; + int i; + + intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL); + if (intel_crtc == NULL) + return; + + drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); + + drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); + intel_crtc->pipe = pipe; + for (i = 0; i < 256; i++) { + intel_crtc->lut_r[i] = i; + intel_crtc->lut_g[i] = i; + intel_crtc->lut_b[i] = i; + } + + intel_crtc->cursor_addr = 0; + intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; + drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); + + intel_crtc->mode_set.crtc = &intel_crtc->base; + intel_crtc->mode_set.connectors = (struct drm_connector **)(intel_crtc + 1); + intel_crtc->mode_set.num_connectors = 0; + + if (i915_fbpercrtc) { + + + + } +} + +struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) +{ + struct drm_crtc *crtc = NULL; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (intel_crtc->pipe == pipe) + break; + } + return crtc; +} + +int intel_connector_clones(struct drm_device *dev, int type_mask) +{ + int index_mask = 0; + struct drm_connector *connector; + int entry = 0; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + if (type_mask & (1 << intel_output->type)) + index_mask |= (1 << entry); + entry++; + } + return index_mask; +} + + +static void intel_setup_outputs(struct drm_device *dev) +{ + struct drm_connector *connector; + + intel_crt_init(dev); + + /* Set up integrated LVDS */ + if (IS_MOBILE(dev) && !IS_I830(dev)) + intel_lvds_init(dev); + + if (IS_I9XX(dev)) { + intel_sdvo_init(dev, SDVOB); + intel_sdvo_init(dev, SDVOC); + } else + intel_dvo_init(dev); + + if (IS_I9XX(dev) && !IS_I915G(dev)) + intel_tv_init(dev); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + struct intel_output *intel_output = to_intel_output(connector); + struct drm_encoder *encoder = &intel_output->enc; + int crtc_mask = 0, clone_mask = 0; + + /* valid crtcs */ + switch(intel_output->type) { + case INTEL_OUTPUT_DVO: + case INTEL_OUTPUT_SDVO: + crtc_mask = ((1 << 0)| + (1 << 1)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_ANALOG: + crtc_mask = ((1 << 0)| + (1 << 1)); + clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | + (1 << INTEL_OUTPUT_DVO) | + (1 << INTEL_OUTPUT_SDVO)); + break; + case INTEL_OUTPUT_LVDS: + crtc_mask = (1 << 1); + clone_mask = (1 << INTEL_OUTPUT_LVDS); + break; + case INTEL_OUTPUT_TVOUT: + crtc_mask = ((1 << 0) | + (1 << 1)); + clone_mask = (1 << INTEL_OUTPUT_TVOUT); + break; + } + encoder->possible_crtcs = crtc_mask; + encoder->possible_clones = intel_connector_clones(dev, clone_mask); + } +} + +static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) +{ + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_device *dev = fb->dev; + + if (fb->fbdev) + intelfb_remove(dev, fb); + + drm_framebuffer_cleanup(fb); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + + kfree(intel_fb); +} + +static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, + struct drm_file *file_priv, + unsigned int *handle) +{ + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_gem_object *object = intel_fb->obj; + + return drm_gem_handle_create(file_priv, object, handle); +} + +static const struct drm_framebuffer_funcs intel_fb_funcs = { + .destroy = intel_user_framebuffer_destroy, + .create_handle = intel_user_framebuffer_create_handle, +}; + +int intel_framebuffer_create(struct drm_device *dev, + struct drm_mode_fb_cmd *mode_cmd, + struct drm_framebuffer **fb, + struct drm_gem_object *obj) +{ + struct intel_framebuffer *intel_fb; + int ret; + + intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); + if (!intel_fb) + return -ENOMEM; + + ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); + if (ret) { + DRM_ERROR("framebuffer init failed %d\n", ret); + return ret; + } + + drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); + + intel_fb->obj = obj; + + *fb = &intel_fb->base; + + return 0; +} + + +static struct drm_framebuffer * +intel_user_framebuffer_create(struct drm_device *dev, + struct drm_file *filp, + struct drm_mode_fb_cmd *mode_cmd) +{ + struct drm_gem_object *obj; + struct drm_framebuffer *fb; + int ret; + + obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle); + if (!obj) + return NULL; + + ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj); + if (ret) { + drm_gem_object_unreference(obj); + return NULL; + } + + return fb; +} + +static int intel_insert_new_fb(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_framebuffer *fb, + struct drm_mode_fb_cmd *mode_cmd) +{ + struct intel_framebuffer *intel_fb; + struct drm_gem_object *obj; + struct drm_crtc *crtc; + + intel_fb = to_intel_framebuffer(fb); + + obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle); + + if (!obj) + return -EINVAL; + + intel_fb->obj = obj; + drm_gem_object_unreference(intel_fb->obj); + drm_helper_mode_fill_fb_struct(fb, mode_cmd); + mutex_unlock(&dev->struct_mutex); + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->fb == fb) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y); + } + } + return 0; +} + +static const struct drm_mode_config_funcs intel_mode_funcs = { + .resize_fb = intel_insert_new_fb, + .fb_create = intel_user_framebuffer_create, + .fb_changed = intelfb_probe, +}; + +void intel_modeset_init(struct drm_device *dev) +{ + int num_pipe; + int i; + + drm_mode_config_init(dev); + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + + dev->mode_config.funcs = (void *)&intel_mode_funcs; + + if (IS_I965G(dev)) { + dev->mode_config.max_width = 8192; + dev->mode_config.max_height = 8192; + } else { + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + } + + /* set memory base */ + if (IS_I9XX(dev)) + dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2); + else + dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0); + + if (IS_MOBILE(dev) || IS_I9XX(dev)) + num_pipe = 2; + else + num_pipe = 1; + DRM_DEBUG("%d display pipe%s available.\n", + num_pipe, num_pipe > 1 ? "s" : ""); + + for (i = 0; i < num_pipe; i++) { + intel_crtc_init(dev, i); + } + + intel_setup_outputs(dev); +} + +void intel_modeset_cleanup(struct drm_device *dev) +{ + drm_mode_config_cleanup(dev); +} + + +/* current intel driver doesn't take advantage of encoders + always give back the encoder for the connector +*/ +struct drm_encoder *intel_best_encoder(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + return &intel_output->enc; +} diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h new file mode 100644 index 000000000000..407edd5bf582 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ +#ifndef __INTEL_DRV_H__ +#define __INTEL_DRV_H__ + +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/i2c-algo-bit.h> +#include "drm_crtc.h" + +#include "drm_crtc_helper.h" +/* + * Display related stuff + */ + +/* store information about an Ixxx DVO */ +/* The i830->i865 use multiple DVOs with multiple i2cs */ +/* the i915, i945 have a single sDVO i2c bus - which is different */ +#define MAX_OUTPUTS 6 +/* maximum connectors per crtcs in the mode set */ +#define INTELFB_CONN_LIMIT 4 + +#define INTEL_I2C_BUS_DVO 1 +#define INTEL_I2C_BUS_SDVO 2 + +/* these are outputs from the chip - integrated only + external chips are via DVO or SDVO output */ +#define INTEL_OUTPUT_UNUSED 0 +#define INTEL_OUTPUT_ANALOG 1 +#define INTEL_OUTPUT_DVO 2 +#define INTEL_OUTPUT_SDVO 3 +#define INTEL_OUTPUT_LVDS 4 +#define INTEL_OUTPUT_TVOUT 5 + +#define INTEL_DVO_CHIP_NONE 0 +#define INTEL_DVO_CHIP_LVDS 1 +#define INTEL_DVO_CHIP_TMDS 2 +#define INTEL_DVO_CHIP_TVOUT 4 + +struct intel_i2c_chan { + struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */ + u32 reg; /* GPIO reg */ + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; + u8 slave_addr; +}; + +struct intel_framebuffer { + struct drm_framebuffer base; + struct drm_gem_object *obj; +}; + + +struct intel_output { + struct drm_connector base; + + struct drm_encoder enc; + int type; + struct intel_i2c_chan *i2c_bus; /* for control functions */ + struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */ + bool load_detect_temp; + void *dev_priv; +}; + +struct intel_crtc { + struct drm_crtc base; + int pipe; + int plane; + uint32_t cursor_addr; + u8 lut_r[256], lut_g[256], lut_b[256]; + int dpms_mode; + struct intel_framebuffer *fbdev_fb; + /* a mode_set for fbdev users on this crtc */ + struct drm_mode_set mode_set; +}; + +#define to_intel_crtc(x) container_of(x, struct intel_crtc, base) +#define to_intel_output(x) container_of(x, struct intel_output, base) +#define enc_to_intel_output(x) container_of(x, struct intel_output, enc) +#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) + +struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name); +void intel_i2c_destroy(struct intel_i2c_chan *chan); +int intel_ddc_get_modes(struct intel_output *intel_output); +extern bool intel_ddc_probe(struct intel_output *intel_output); + +extern void intel_crt_init(struct drm_device *dev); +extern void intel_sdvo_init(struct drm_device *dev, int output_device); +extern void intel_dvo_init(struct drm_device *dev); +extern void intel_tv_init(struct drm_device *dev); +extern void intel_lvds_init(struct drm_device *dev); + +extern void intel_crtc_load_lut(struct drm_crtc *crtc); +extern void intel_encoder_prepare (struct drm_encoder *encoder); +extern void intel_encoder_commit (struct drm_encoder *encoder); + +extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector); + +extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, + struct drm_crtc *crtc); +extern void intel_wait_for_vblank(struct drm_device *dev); +extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); +extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, + struct drm_display_mode *mode, + int *dpms_mode); +extern void intel_release_load_detect_pipe(struct intel_output *intel_output, + int dpms_mode); + +extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB); +extern int intel_sdvo_supports_hotplug(struct drm_connector *connector); +extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable); +extern int intelfb_probe(struct drm_device *dev); +extern int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb); +extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc); +extern void intelfb_restore(void); +extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, + u16 blue, int regno); + +extern int intel_framebuffer_create(struct drm_device *dev, + struct drm_mode_fb_cmd *mode_cmd, + struct drm_framebuffer **fb, + struct drm_gem_object *obj); +#endif /* __INTEL_DRV_H__ */ diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c new file mode 100644 index 000000000000..008bfaed4614 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -0,0 +1,501 @@ +/* + * Copyright 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "dvo.h" + +#define SIL164_ADDR 0x38 +#define CH7xxx_ADDR 0x76 +#define TFP410_ADDR 0x38 + +extern struct intel_dvo_dev_ops sil164_ops; +extern struct intel_dvo_dev_ops ch7xxx_ops; +extern struct intel_dvo_dev_ops ivch_ops; +extern struct intel_dvo_dev_ops tfp410_ops; +extern struct intel_dvo_dev_ops ch7017_ops; + +struct intel_dvo_device intel_dvo_devices[] = { + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "sil164", + .dvo_reg = DVOC, + .slave_addr = SIL164_ADDR, + .dev_ops = &sil164_ops, + }, + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "ch7xxx", + .dvo_reg = DVOC, + .slave_addr = CH7xxx_ADDR, + .dev_ops = &ch7xxx_ops, + }, + { + .type = INTEL_DVO_CHIP_LVDS, + .name = "ivch", + .dvo_reg = DVOA, + .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ + .dev_ops = &ivch_ops, + }, + { + .type = INTEL_DVO_CHIP_TMDS, + .name = "tfp410", + .dvo_reg = DVOC, + .slave_addr = TFP410_ADDR, + .dev_ops = &tfp410_ops, + }, + { + .type = INTEL_DVO_CHIP_LVDS, + .name = "ch7017", + .dvo_reg = DVOC, + .slave_addr = 0x75, + .gpio = GPIOE, + .dev_ops = &ch7017_ops, + } +}; + +static void intel_dvo_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_i915_private *dev_priv = encoder->dev->dev_private; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + u32 dvo_reg = dvo->dvo_reg; + u32 temp = I915_READ(dvo_reg); + + if (mode == DRM_MODE_DPMS_ON) { + I915_WRITE(dvo_reg, temp | DVO_ENABLE); + I915_READ(dvo_reg); + dvo->dev_ops->dpms(dvo, mode); + } else { + dvo->dev_ops->dpms(dvo, mode); + I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); + I915_READ(dvo_reg); + } +} + +static void intel_dvo_save(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* Each output should probably just save the registers it touches, + * but for now, use more overkill. + */ + dev_priv->saveDVOA = I915_READ(DVOA); + dev_priv->saveDVOB = I915_READ(DVOB); + dev_priv->saveDVOC = I915_READ(DVOC); + + dvo->dev_ops->save(dvo); +} + +static void intel_dvo_restore(struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + dvo->dev_ops->restore(dvo); + + I915_WRITE(DVOA, dev_priv->saveDVOA); + I915_WRITE(DVOB, dev_priv->saveDVOB); + I915_WRITE(DVOC, dev_priv->saveDVOC); +} + +static int intel_dvo_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + /* XXX: Validate clock range */ + + if (dvo->panel_fixed_mode) { + if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay) + return MODE_PANEL; + } + + return dvo->dev_ops->mode_valid(dvo, mode); +} + +static bool intel_dvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (dvo->panel_fixed_mode != NULL) { +#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x + C(hdisplay); + C(hsync_start); + C(hsync_end); + C(htotal); + C(vdisplay); + C(vsync_start); + C(vsync_end); + C(vtotal); + C(clock); + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); +#undef C + } + + if (dvo->dev_ops->mode_fixup) + return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode); + + return true; +} + +static void intel_dvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_dvo_device *dvo = intel_output->dev_priv; + int pipe = intel_crtc->pipe; + u32 dvo_val; + u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg; + int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + + switch (dvo_reg) { + case DVOA: + default: + dvo_srcdim_reg = DVOA_SRCDIM; + break; + case DVOB: + dvo_srcdim_reg = DVOB_SRCDIM; + break; + case DVOC: + dvo_srcdim_reg = DVOC_SRCDIM; + break; + } + + dvo->dev_ops->mode_set(dvo, mode, adjusted_mode); + + /* Save the data order, since I don't know what it should be set to. */ + dvo_val = I915_READ(dvo_reg) & + (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); + dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | + DVO_BLANK_ACTIVE_HIGH; + + if (pipe == 1) + dvo_val |= DVO_PIPE_B_SELECT; + dvo_val |= DVO_PIPE_STALL; + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + dvo_val |= DVO_HSYNC_ACTIVE_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + dvo_val |= DVO_VSYNC_ACTIVE_HIGH; + + I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED); + + /*I915_WRITE(DVOB_SRCDIM, + (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | + (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ + I915_WRITE(dvo_srcdim_reg, + (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | + (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT)); + /*I915_WRITE(DVOB, dvo_val);*/ + I915_WRITE(dvo_reg, dvo_val); +} + +/** + * Detect the output connection on our DVO device. + * + * Unimplemented. + */ +static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + return dvo->dev_ops->detect(dvo); +} + +static int intel_dvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + /* We should probably have an i2c driver get_modes function for those + * devices which will have a fixed set of modes determined by the chip + * (TV-out, for example), but for now with just TMDS and LVDS, + * that's not the case. + */ + intel_ddc_get_modes(intel_output); + if (!list_empty(&connector->probed_modes)) + return 1; + + + if (dvo->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode); + if (mode) { + drm_mode_probed_add(connector, mode); + return 1; + } + } + return 0; +} + +static void intel_dvo_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + + if (dvo) { + if (dvo->dev_ops->destroy) + dvo->dev_ops->destroy(dvo); + if (dvo->panel_fixed_mode) + kfree(dvo->panel_fixed_mode); + /* no need, in i830_dvoices[] now */ + //kfree(dvo); + } + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +#ifdef RANDR_GET_CRTC_INTERFACE +static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT); + + return intel_pipe_to_crtc(pScrn, pipe); +} +#endif + +static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { + .dpms = intel_dvo_dpms, + .mode_fixup = intel_dvo_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_dvo_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_dvo_connector_funcs = { + .save = intel_dvo_save, + .restore = intel_dvo_restore, + .detect = intel_dvo_detect, + .destroy = intel_dvo_destroy, + .fill_modes = drm_helper_probe_single_connector_modes, +}; + +static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = { + .mode_valid = intel_dvo_mode_valid, + .get_modes = intel_dvo_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_dvo_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_dvo_enc_funcs = { + .destroy = intel_dvo_enc_destroy, +}; + + +/** + * Attempts to get a fixed panel timing for LVDS (currently only the i830). + * + * Other chips with DVO LVDS will need to extend this to deal with the LVDS + * chip being on DVOB/C and having multiple pipes. + */ +static struct drm_display_mode * +intel_dvo_get_current_mode (struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_dvo_device *dvo = intel_output->dev_priv; + uint32_t dvo_reg = dvo->dvo_reg; + uint32_t dvo_val = I915_READ(dvo_reg); + struct drm_display_mode *mode = NULL; + + /* If the DVO port is active, that'll be the LVDS, so we can pull out + * its timings to get how the BIOS set up the panel. + */ + if (dvo_val & DVO_ENABLE) { + struct drm_crtc *crtc; + int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0; + + crtc = intel_get_crtc_from_pipe(dev, pipe); + if (crtc) { + mode = intel_crtc_mode_get(dev, crtc); + + if (mode) { + mode->type |= DRM_MODE_TYPE_PREFERRED; + if (dvo_val & DVO_HSYNC_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + if (dvo_val & DVO_VSYNC_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + } + } + } + return mode; +} + +void intel_dvo_init(struct drm_device *dev) +{ + struct intel_output *intel_output; + struct intel_dvo_device *dvo; + struct intel_i2c_chan *i2cbus = NULL; + int ret = 0; + int i; + int gpio_inited = 0; + int encoder_type = DRM_MODE_ENCODER_NONE; + intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) + return; + + /* Set up the DDC bus */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D"); + if (!intel_output->ddc_bus) + goto free_intel; + + /* Now, try to find a controller */ + for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { + struct drm_connector *connector = &intel_output->base; + int gpio; + + dvo = &intel_dvo_devices[i]; + + /* Allow the I2C driver info to specify the GPIO to be used in + * special cases, but otherwise default to what's defined + * in the spec. + */ + if (dvo->gpio != 0) + gpio = dvo->gpio; + else if (dvo->type == INTEL_DVO_CHIP_LVDS) + gpio = GPIOB; + else + gpio = GPIOE; + + /* Set up the I2C bus necessary for the chip we're probing. + * It appears that everything is on GPIOE except for panels + * on i830 laptops, which are on GPIOB (DVOA). + */ + if (gpio_inited != gpio) { + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); + if (!(i2cbus = intel_i2c_create(dev, gpio, + gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { + continue; + } + gpio_inited = gpio; + } + + if (dvo->dev_ops!= NULL) + ret = dvo->dev_ops->init(dvo, i2cbus); + else + ret = false; + + if (!ret) + continue; + + intel_output->type = INTEL_OUTPUT_DVO; + switch (dvo->type) { + case INTEL_DVO_CHIP_TMDS: + drm_connector_init(dev, connector, + &intel_dvo_connector_funcs, + DRM_MODE_CONNECTOR_DVII); + encoder_type = DRM_MODE_ENCODER_TMDS; + break; + case INTEL_DVO_CHIP_LVDS: + drm_connector_init(dev, connector, + &intel_dvo_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + encoder_type = DRM_MODE_ENCODER_LVDS; + break; + } + + drm_connector_helper_add(connector, + &intel_dvo_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + intel_output->dev_priv = dvo; + intel_output->i2c_bus = i2cbus; + + drm_encoder_init(dev, &intel_output->enc, + &intel_dvo_enc_funcs, encoder_type); + drm_encoder_helper_add(&intel_output->enc, + &intel_dvo_helper_funcs); + + drm_mode_connector_attach_encoder(&intel_output->base, + &intel_output->enc); + if (dvo->type == INTEL_DVO_CHIP_LVDS) { + /* For our LVDS chipsets, we should hopefully be able + * to dig the fixed panel mode out of the BIOS data. + * However, it's in a different format from the BIOS + * data on chipsets with integrated LVDS (stored in AIM + * headers, likely), so for now, just get the current + * mode being output through DVO. + */ + dvo->panel_fixed_mode = + intel_dvo_get_current_mode(connector); + dvo->panel_wants_dither = true; + } + + drm_sysfs_connector_add(connector); + return; + } + + intel_i2c_destroy(intel_output->ddc_bus); + /* Didn't find a chip, so tear down. */ + if (i2cbus != NULL) + intel_i2c_destroy(i2cbus); +free_intel: + kfree(intel_output); +} diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c new file mode 100644 index 000000000000..a89ebea7b76d --- /dev/null +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -0,0 +1,926 @@ +/* + * Copyright © 2007 David Airlie + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * David Airlie + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/sysrq.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/init.h> + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +struct intelfb_par { + struct drm_device *dev; + struct drm_display_mode *our_mode; + struct intel_framebuffer *intel_fb; + int crtc_count; + /* crtc currently bound to this */ + uint32_t crtc_ids[2]; +}; + +static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_crtc *crtc; + int i; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_mode_set *modeset = &intel_crtc->mode_set; + struct drm_framebuffer *fb = modeset->fb; + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + + if (regno > 255) + return 1; + + if (fb->depth == 8) { + intel_crtc_fb_gamma_set(crtc, red, green, blue, regno); + return 0; + } + + if (regno < 16) { + switch (fb->depth) { + case 15: + fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) | + ((green & 0xf800) >> 6) | + ((blue & 0xf800) >> 11); + break; + case 16: + fb->pseudo_palette[regno] = (red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + break; + case 24: + case 32: + fb->pseudo_palette[regno] = ((red & 0xff00) << 8) | + (green & 0xff00) | + ((blue & 0xff00) >> 8); + break; + } + } + } + return 0; +} + +static int intelfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct intel_framebuffer *intel_fb = par->intel_fb; + struct drm_framebuffer *fb = &intel_fb->base; + int depth; + + if (var->pixclock == -1 || !var->pixclock) + return -EINVAL; + + /* Need to resize the fb object !!! */ + if (var->xres > fb->width || var->yres > fb->height) { + DRM_ERROR("Requested width/height is greater than current fb object %dx%d > %dx%d\n",var->xres,var->yres,fb->width,fb->height); + DRM_ERROR("Need resizing code.\n"); + return -EINVAL; + } + + switch (var->bits_per_pixel) { + case 16: + depth = (var->green.length == 6) ? 16 : 15; + break; + case 32: + depth = (var->transp.length > 0) ? 32 : 24; + break; + default: + depth = var->bits_per_pixel; + break; + } + + switch (depth) { + case 8: + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 15: + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->transp.length = 1; + var->transp.offset = 15; + break; + case 16: + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 24: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + var->transp.offset = 0; + break; + case 32: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 8; + var->transp.offset = 24; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* this will let fbcon do the mode init */ +/* FIXME: take mode config lock? */ +static int intelfb_set_par(struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct fb_var_screeninfo *var = &info->var; + int i; + + DRM_DEBUG("%d %d\n", var->xres, var->pixclock); + + if (var->pixclock != -1) { + + DRM_ERROR("PIXEL CLCOK SET\n"); + return -EINVAL; + } else { + struct drm_crtc *crtc; + int ret; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + if (crtc->fb == intel_crtc->mode_set.fb) { + mutex_lock(&dev->mode_config.mutex); + ret = crtc->funcs->set_config(&intel_crtc->mode_set); + mutex_unlock(&dev->mode_config.mutex); + if (ret) + return ret; + } + } + return 0; + } +} + +static int intelfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_mode_set *modeset; + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int ret = 0; + int i; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + if (i == par->crtc_count) + continue; + + intel_crtc = to_intel_crtc(crtc); + modeset = &intel_crtc->mode_set; + + modeset->x = var->xoffset; + modeset->y = var->yoffset; + + if (modeset->num_connectors) { + mutex_lock(&dev->mode_config.mutex); + ret = crtc->funcs->set_config(modeset); + mutex_unlock(&dev->mode_config.mutex); + if (!ret) { + info->var.xoffset = var->xoffset; + info->var.yoffset = var->yoffset; + } + } + } + + return ret; +} + +static void intelfb_on(struct fb_info *info) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_crtc *crtc; + struct drm_encoder *encoder; + int i; + + /* + * For each CRTC in this fb, find all associated encoders + * and turn them off, then turn off the CRTC. + */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); + + /* Found a CRTC on this fb, now find encoders */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + struct drm_encoder_helper_funcs *encoder_funcs; + encoder_funcs = encoder->helper_private; + encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); + } + } + } +} + +static void intelfb_off(struct fb_info *info, int dpms_mode) +{ + struct intelfb_par *par = info->par; + struct drm_device *dev = par->dev; + struct drm_crtc *crtc; + struct drm_encoder *encoder; + int i; + + /* + * For each CRTC in this fb, find all associated encoders + * and turn them off, then turn off the CRTC. + */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + + for (i = 0; i < par->crtc_count; i++) + if (crtc->base.id == par->crtc_ids[i]) + break; + + /* Found a CRTC on this fb, now find encoders */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + struct drm_encoder_helper_funcs *encoder_funcs; + encoder_funcs = encoder->helper_private; + encoder_funcs->dpms(encoder, dpms_mode); + } + } + if (dpms_mode == DRM_MODE_DPMS_OFF) + crtc_funcs->dpms(crtc, dpms_mode); + } +} + +int intelfb_blank(int blank, struct fb_info *info) +{ + switch (blank) { + case FB_BLANK_UNBLANK: + intelfb_on(info); + break; + case FB_BLANK_NORMAL: + intelfb_off(info, DRM_MODE_DPMS_STANDBY); + break; + case FB_BLANK_HSYNC_SUSPEND: + intelfb_off(info, DRM_MODE_DPMS_STANDBY); + break; + case FB_BLANK_VSYNC_SUSPEND: + intelfb_off(info, DRM_MODE_DPMS_SUSPEND); + break; + case FB_BLANK_POWERDOWN: + intelfb_off(info, DRM_MODE_DPMS_OFF); + break; + } + return 0; +} + +static struct fb_ops intelfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = intelfb_check_var, + .fb_set_par = intelfb_set_par, + .fb_setcolreg = intelfb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_pan_display = intelfb_pan_display, + .fb_blank = intelfb_blank, +}; + +/** + * Curretly it is assumed that the old framebuffer is reused. + * + * LOCKING + * caller should hold the mode config lock. + * + */ +int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct fb_info *info; + struct drm_framebuffer *fb; + struct drm_display_mode *mode = crtc->desired_mode; + + fb = crtc->fb; + if (!fb) + return 1; + + info = fb->fbdev; + if (!info) + return 1; + + if (!mode) + return 1; + + info->var.xres = mode->hdisplay; + info->var.right_margin = mode->hsync_start - mode->hdisplay; + info->var.hsync_len = mode->hsync_end - mode->hsync_start; + info->var.left_margin = mode->htotal - mode->hsync_end; + info->var.yres = mode->vdisplay; + info->var.lower_margin = mode->vsync_start - mode->vdisplay; + info->var.vsync_len = mode->vsync_end - mode->vsync_start; + info->var.upper_margin = mode->vtotal - mode->vsync_end; + info->var.pixclock = 10000000 / mode->htotal * 1000 / mode->vtotal * 100; + /* avoid overflow */ + info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh; + + return 0; +} +EXPORT_SYMBOL(intelfb_resize); + +static struct drm_mode_set kernelfb_mode; + +int intelfb_panic(struct notifier_block *n, unsigned long ununsed, + void *panic_str) +{ + DRM_ERROR("panic occurred, switching back to text console\n"); + + intelfb_restore(); + return 0; +} +EXPORT_SYMBOL(intelfb_panic); + +static struct notifier_block paniced = { + .notifier_call = intelfb_panic, +}; + +int intelfb_create(struct drm_device *dev, uint32_t fb_width, + uint32_t fb_height, uint32_t surface_width, + uint32_t surface_height, + struct intel_framebuffer **intel_fb_p) +{ + struct fb_info *info; + struct intelfb_par *par; + struct drm_framebuffer *fb; + struct intel_framebuffer *intel_fb; + struct drm_mode_fb_cmd mode_cmd; + struct drm_gem_object *fbo = NULL; + struct drm_i915_gem_object *obj_priv; + struct device *device = &dev->pdev->dev; + int size, ret, mmio_bar = IS_I9XX(dev) ? 0 : 1; + + mode_cmd.width = surface_width; + mode_cmd.height = surface_height; + + mode_cmd.bpp = 32; + mode_cmd.pitch = mode_cmd.width * ((mode_cmd.bpp + 1) / 8); + mode_cmd.depth = 24; + + size = mode_cmd.pitch * mode_cmd.height; + size = ALIGN(size, PAGE_SIZE); + fbo = drm_gem_object_alloc(dev, size); + if (!fbo) { + printk(KERN_ERR "failed to allocate framebuffer\n"); + ret = -ENOMEM; + goto out; + } + obj_priv = fbo->driver_private; + + mutex_lock(&dev->struct_mutex); + + ret = i915_gem_object_pin(fbo, PAGE_SIZE); + if (ret) { + DRM_ERROR("failed to pin fb: %d\n", ret); + goto out_unref; + } + + /* Flush everything out, we'll be doing GTT only from now on */ + i915_gem_object_set_to_gtt_domain(fbo, 1); + + ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo); + if (ret) { + DRM_ERROR("failed to allocate fb.\n"); + goto out_unref; + } + + list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list); + + intel_fb = to_intel_framebuffer(fb); + *intel_fb_p = intel_fb; + + info = framebuffer_alloc(sizeof(struct intelfb_par), device); + if (!info) { + ret = -ENOMEM; + goto out_unref; + } + + par = info->par; + + strcpy(info->fix.id, "inteldrmfb"); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.type_aux = 0; + info->fix.xpanstep = 1; /* doing it in hw */ + info->fix.ypanstep = 1; /* doing it in hw */ + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_I830; + info->fix.type_aux = 0; + + info->flags = FBINFO_DEFAULT; + + info->fbops = &intelfb_ops; + + info->fix.line_length = fb->pitch; + info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset; + info->fix.smem_len = size; + + info->flags = FBINFO_DEFAULT; + + info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset, + size); + if (!info->screen_base) { + ret = -ENOSPC; + goto out_unref; + } + info->screen_size = size; + +// memset(info->screen_base, 0, size); + + info->pseudo_palette = fb->pseudo_palette; + info->var.xres_virtual = fb->width; + info->var.yres_virtual = fb->height; + info->var.bits_per_pixel = fb->bits_per_pixel; + info->var.xoffset = 0; + info->var.yoffset = 0; + info->var.activate = FB_ACTIVATE_NOW; + info->var.height = -1; + info->var.width = -1; + + info->var.xres = fb_width; + info->var.yres = fb_height; + + /* FIXME: we really shouldn't expose mmio space at all */ + info->fix.mmio_start = pci_resource_start(dev->pdev, mmio_bar); + info->fix.mmio_len = pci_resource_len(dev->pdev, mmio_bar); + + info->pixmap.size = 64*1024; + info->pixmap.buf_align = 8; + info->pixmap.access_align = 32; + info->pixmap.flags = FB_PIXMAP_SYSTEM; + info->pixmap.scan_align = 1; + + switch(fb->depth) { + case 8: + info->var.red.offset = 0; + info->var.green.offset = 0; + info->var.blue.offset = 0; + info->var.red.length = 8; /* 8bit DAC */ + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 15: + info->var.red.offset = 10; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 5; + info->var.blue.length = 5; + info->var.transp.offset = 15; + info->var.transp.length = 1; + break; + case 16: + info->var.red.offset = 11; + info->var.green.offset = 5; + info->var.blue.offset = 0; + info->var.red.length = 5; + info->var.green.length = 6; + info->var.blue.length = 5; + info->var.transp.offset = 0; + break; + case 24: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 0; + info->var.transp.length = 0; + break; + case 32: + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.transp.offset = 24; + info->var.transp.length = 8; + break; + default: + break; + } + + fb->fbdev = info; + + par->intel_fb = intel_fb; + par->dev = dev; + + /* To allow resizeing without swapping buffers */ + printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width, + intel_fb->base.height, obj_priv->gtt_offset, fbo); + + mutex_unlock(&dev->struct_mutex); + return 0; + +out_unref: + drm_gem_object_unreference(fbo); + mutex_unlock(&dev->struct_mutex); +out: + return ret; +} + +static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + struct drm_framebuffer *fb; + struct drm_connector *connector; + struct fb_info *info; + struct intelfb_par *par; + struct drm_mode_set *modeset; + unsigned int width, height; + int new_fb = 0; + int ret, i, conn_count; + + if (!drm_helper_crtc_in_use(crtc)) + return 0; + + if (!crtc->desired_mode) + return 0; + + width = crtc->desired_mode->hdisplay; + height = crtc->desired_mode->vdisplay; + + /* is there an fb bound to this crtc already */ + if (!intel_crtc->mode_set.fb) { + ret = intelfb_create(dev, width, height, width, height, &intel_fb); + if (ret) + return -EINVAL; + new_fb = 1; + } else { + fb = intel_crtc->mode_set.fb; + intel_fb = to_intel_framebuffer(fb); + if ((intel_fb->base.width < width) || (intel_fb->base.height < height)) + return -EINVAL; + } + + info = intel_fb->base.fbdev; + par = info->par; + + modeset = &intel_crtc->mode_set; + modeset->fb = &intel_fb->base; + conn_count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (connector->encoder) + if (connector->encoder->crtc == modeset->crtc) { + modeset->connectors[conn_count] = connector; + conn_count++; + if (conn_count > INTELFB_CONN_LIMIT) + BUG(); + } + } + + for (i = conn_count; i < INTELFB_CONN_LIMIT; i++) + modeset->connectors[i] = NULL; + + par->crtc_ids[0] = crtc->base.id; + + modeset->num_connectors = conn_count; + if (modeset->mode != modeset->crtc->desired_mode) + modeset->mode = modeset->crtc->desired_mode; + + par->crtc_count = 1; + + if (new_fb) { + info->var.pixclock = -1; + if (register_framebuffer(info) < 0) + return -EINVAL; + } else + intelfb_set_par(info); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + + /* Switch back to kernel console on panic */ + kernelfb_mode = *modeset; + atomic_notifier_chain_register(&panic_notifier_list, &paniced); + printk(KERN_INFO "registered panic notifier\n"); + + return 0; +} + +static int intelfb_multi_fb_probe(struct drm_device *dev) +{ + + struct drm_crtc *crtc; + int ret = 0; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + ret = intelfb_multi_fb_probe_crtc(dev, crtc); + if (ret) + return ret; + } + return ret; +} + +static int intelfb_single_fb_probe(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_connector *connector; + unsigned int fb_width = (unsigned)-1, fb_height = (unsigned)-1; + unsigned int surface_width = 0, surface_height = 0; + int new_fb = 0; + int crtc_count = 0; + int ret, i, conn_count = 0; + struct intel_framebuffer *intel_fb; + struct fb_info *info; + struct intelfb_par *par; + struct drm_mode_set *modeset = NULL; + + DRM_DEBUG("\n"); + + /* Get a count of crtcs now in use and new min/maxes width/heights */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (!drm_helper_crtc_in_use(crtc)) + continue; + + crtc_count++; + if (!crtc->desired_mode) + continue; + + /* Smallest mode determines console size... */ + if (crtc->desired_mode->hdisplay < fb_width) + fb_width = crtc->desired_mode->hdisplay; + + if (crtc->desired_mode->vdisplay < fb_height) + fb_height = crtc->desired_mode->vdisplay; + + /* ... but largest for memory allocation dimensions */ + if (crtc->desired_mode->hdisplay > surface_width) + surface_width = crtc->desired_mode->hdisplay; + + if (crtc->desired_mode->vdisplay > surface_height) + surface_height = crtc->desired_mode->vdisplay; + } + + if (crtc_count == 0 || fb_width == -1 || fb_height == -1) { + /* hmm everyone went away - assume VGA cable just fell out + and will come back later. */ + DRM_DEBUG("no CRTCs available?\n"); + return 0; + } + +//fail + /* Find the fb for our new config */ + if (list_empty(&dev->mode_config.fb_kernel_list)) { + DRM_DEBUG("creating new fb (console size %dx%d, " + "buffer size %dx%d)\n", fb_width, fb_height, + surface_width, surface_height); + ret = intelfb_create(dev, fb_width, fb_height, surface_width, + surface_height, &intel_fb); + if (ret) + return -EINVAL; + new_fb = 1; + } else { + struct drm_framebuffer *fb; + + fb = list_first_entry(&dev->mode_config.fb_kernel_list, + struct drm_framebuffer, filp_head); + intel_fb = to_intel_framebuffer(fb); + + /* if someone hotplugs something bigger than we have already + * allocated, we are pwned. As really we can't resize an + * fbdev that is in the wild currently due to fbdev not really + * being designed for the lower layers moving stuff around + * under it. + * - so in the grand style of things - punt. + */ + if ((fb->width < surface_width) || + (fb->height < surface_height)) { + DRM_ERROR("fb not large enough for console\n"); + return -EINVAL; + } + } +// fail + + info = intel_fb->base.fbdev; + par = info->par; + + crtc_count = 0; + /* + * For each CRTC, set up the connector list for the CRTC's mode + * set configuration. + */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + modeset = &intel_crtc->mode_set; + modeset->fb = &intel_fb->base; + conn_count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + if (!connector->encoder) + continue; + + if(connector->encoder->crtc == modeset->crtc) { + modeset->connectors[conn_count++] = connector; + if (conn_count > INTELFB_CONN_LIMIT) + BUG(); + } + } + + /* Zero out remaining connector pointers */ + for (i = conn_count; i < INTELFB_CONN_LIMIT; i++) + modeset->connectors[i] = NULL; + + par->crtc_ids[crtc_count++] = crtc->base.id; + + modeset->num_connectors = conn_count; + if (modeset->mode != modeset->crtc->desired_mode) + modeset->mode = modeset->crtc->desired_mode; + } + par->crtc_count = crtc_count; + + if (new_fb) { + info->var.pixclock = -1; + if (register_framebuffer(info) < 0) + return -EINVAL; + } else + intelfb_set_par(info); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + info->fix.id); + + /* Switch back to kernel console on panic */ + kernelfb_mode = *modeset; + atomic_notifier_chain_register(&panic_notifier_list, &paniced); + printk(KERN_INFO "registered panic notifier\n"); + + return 0; +} + +/** + * intelfb_restore - restore the framebuffer console (kernel) config + * + * Restore's the kernel's fbcon mode, used for lastclose & panic paths. + */ +void intelfb_restore(void) +{ + drm_crtc_helper_set_config(&kernelfb_mode); +} + +static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) +{ + intelfb_restore(); +} + +static struct sysrq_key_op sysrq_intelfb_restore_op = { + .handler = intelfb_sysrq, + .help_msg = "force fb", + .action_msg = "force restore of fb console", +}; + +int intelfb_probe(struct drm_device *dev) +{ + int ret; + + DRM_DEBUG("\n"); + + /* something has changed in the lower levels of hell - deal with it + here */ + + /* two modes : a) 1 fb to rule all crtcs. + b) one fb per crtc. + two actions 1) new connected device + 2) device removed. + case a/1 : if the fb surface isn't big enough - resize the surface fb. + if the fb size isn't big enough - resize fb into surface. + if everything big enough configure the new crtc/etc. + case a/2 : undo the configuration + possibly resize down the fb to fit the new configuration. + case b/1 : see if it is on a new crtc - setup a new fb and add it. + case b/2 : teardown the new fb. + */ + + /* mode a first */ + /* search for an fb */ + if (i915_fbpercrtc == 1) { + ret = intelfb_multi_fb_probe(dev); + } else { + ret = intelfb_single_fb_probe(dev); + } + + register_sysrq_key('g', &sysrq_intelfb_restore_op); + + return ret; +} +EXPORT_SYMBOL(intelfb_probe); + +int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb) +{ + struct fb_info *info; + + if (!fb) + return -EINVAL; + + info = fb->fbdev; + + if (info) { + unregister_framebuffer(info); + iounmap(info->screen_base); + framebuffer_release(info); + } + + atomic_notifier_chain_unregister(&panic_notifier_list, &paniced); + memset(&kernelfb_mode, 0, sizeof(struct drm_mode_set)); + return 0; +} +EXPORT_SYMBOL(intelfb_remove); +MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c new file mode 100644 index 000000000000..a5a2f5339e9e --- /dev/null +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/i2c-algo-bit.h> +#include "drmP.h" +#include "drm.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/* + * Intel GPIO access functions + */ + +#define I2C_RISEFALL_TIME 20 + +static int get_clock(void *data) +{ + struct intel_i2c_chan *chan = data; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_CLOCK_VAL_IN) != 0); +} + +static int get_data(void *data) +{ + struct intel_i2c_chan *chan = data; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 val; + + val = I915_READ(chan->reg); + return ((val & GPIO_DATA_VAL_IN) != 0); +} + +static void set_clock(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, clock_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK; + else + clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK | + GPIO_CLOCK_VAL_MASK; + I915_WRITE(chan->reg, reserved | clock_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +static void set_data(void *data, int state_high) +{ + struct intel_i2c_chan *chan = data; + struct drm_device *dev = chan->drm_dev; + struct drm_i915_private *dev_priv = chan->drm_dev->dev_private; + u32 reserved = 0, data_bits; + + /* On most chips, these bits must be preserved in software. */ + if (!IS_I830(dev) && !IS_845G(dev)) + reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE | + GPIO_CLOCK_PULLUP_DISABLE); + + if (state_high) + data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK; + else + data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK | + GPIO_DATA_VAL_MASK; + + I915_WRITE(chan->reg, reserved | data_bits); + udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */ +} + +/** + * intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg + * @dev: DRM device + * @output: driver specific output device + * @reg: GPIO reg to use + * @name: name for this bus + * + * Creates and registers a new i2c bus with the Linux i2c layer, for use + * in output probing and control (e.g. DDC or SDVO control functions). + * + * Possible values for @reg include: + * %GPIOA + * %GPIOB + * %GPIOC + * %GPIOD + * %GPIOE + * %GPIOF + * %GPIOG + * %GPIOH + * see PRM for details on how these different busses are used. + */ +struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, + const char *name) +{ + struct intel_i2c_chan *chan; + + chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL); + if (!chan) + goto out_free; + + chan->drm_dev = dev; + chan->reg = reg; + snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); + chan->adapter.owner = THIS_MODULE; +#ifndef I2C_HW_B_INTELFB +#define I2C_HW_B_INTELFB I2C_HW_B_I810 +#endif + chan->adapter.id = I2C_HW_B_INTELFB; + chan->adapter.algo_data = &chan->algo; + chan->adapter.dev.parent = &dev->pdev->dev; + chan->algo.setsda = set_data; + chan->algo.setscl = set_clock; + chan->algo.getsda = get_data; + chan->algo.getscl = get_clock; + chan->algo.udelay = 20; + chan->algo.timeout = usecs_to_jiffies(2200); + chan->algo.data = chan; + + i2c_set_adapdata(&chan->adapter, chan); + + if(i2c_bit_add_bus(&chan->adapter)) + goto out_free; + + /* JJJ: raise SCL and SDA? */ + set_data(chan, 1); + set_clock(chan, 1); + udelay(20); + + return chan; + +out_free: + kfree(chan); + return NULL; +} + +/** + * intel_i2c_destroy - unregister and free i2c bus resources + * @output: channel to free + * + * Unregister the adapter from the i2c layer, then free the structure. + */ +void intel_i2c_destroy(struct intel_i2c_chan *chan) +{ + if (!chan) + return; + + i2c_del_adapter(&chan->adapter); + kfree(chan); +} diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c new file mode 100644 index 000000000000..ccecfaf6307b --- /dev/null +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -0,0 +1,525 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** + * Sets the backlight level. + * + * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). + */ +static void intel_lvds_set_backlight(struct drm_device *dev, int level) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 blc_pwm_ctl; + + blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | + (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); +} + +/** + * Returns the maximum level of the backlight duty cycle field. + */ +static u32 intel_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; +} + +/** + * Sets the power state for the panel. + */ +static void intel_lvds_set_power(struct drm_device *dev, bool on) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 pp_status; + + if (on) { + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while ((pp_status & PP_ON) == 0); + + intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); + } else { + intel_lvds_set_backlight(dev, 0); + + I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = I915_READ(PP_STATUS); + } while (pp_status & PP_ON); + } +} + +static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + + if (mode == DRM_MODE_DPMS_ON) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void intel_lvds_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + /* + * If the light is off at server startup, just make it full brightness + */ + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); +} + +static void intel_lvds_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) + intel_lvds_set_power(dev, true); + else + intel_lvds_set_power(dev, false); +} + +static int intel_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; + + if (fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + } + + return MODE_OK; +} + +static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct drm_encoder *tmp_encoder; + + /* Should never happen!! */ + if (!IS_I965G(dev) && intel_crtc->pipe == 0) { + printk(KERN_ERR "Can't support LVDS on pipe A\n"); + return false; + } + + /* Should never happen!! */ + list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { + if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { + printk(KERN_ERR "Can't enable LVDS and another " + "encoder on the same pipe\n"); + return false; + } + } + + /* + * If we have timings from the BIOS for the panel, put them in + * to the adjusted mode. The CRTC will be set up for this mode, + * with the panel scaling set up to source from the H/VDisplay + * of the original mode. + */ + if (dev_priv->panel_fixed_mode != NULL) { + adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay; + adjusted_mode->hsync_start = + dev_priv->panel_fixed_mode->hsync_start; + adjusted_mode->hsync_end = + dev_priv->panel_fixed_mode->hsync_end; + adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal; + adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay; + adjusted_mode->vsync_start = + dev_priv->panel_fixed_mode->vsync_start; + adjusted_mode->vsync_end = + dev_priv->panel_fixed_mode->vsync_end; + adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal; + adjusted_mode->clock = dev_priv->panel_fixed_mode->clock; + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); + } + + /* + * XXX: It would be nice to support lower refresh rates on the + * panels to reduce power consumption, and perhaps match the + * user's requested refresh rate. + */ + + return true; +} + +static void intel_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + + intel_lvds_set_power(dev, false); +} + +static void intel_lvds_commit( struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (dev_priv->backlight_duty_cycle == 0) + dev_priv->backlight_duty_cycle = + intel_lvds_get_max_backlight(dev); + + intel_lvds_set_power(dev, true); +} + +static void intel_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + u32 pfit_control; + + /* + * The LVDS pin pair will already have been turned on in the + * intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + + /* + * Enable automatic panel scaling so that non-native modes fill the + * screen. Should be enabled before the pipe is enabled, according to + * register description and PRM. + */ + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | + HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + else + pfit_control = 0; + + if (!IS_I965G(dev)) { + if (dev_priv->panel_wants_dither) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + } + else + pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; + + I915_WRITE(PFIT_CONTROL, pfit_control); +} + +/** + * Detect the LVDS connection. + * + * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have + * been set up if the LVDS was actually connected anyway. + */ +static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector) +{ + return connector_status_connected; +} + +/** + * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. + */ +static int intel_lvds_get_modes(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_i915_private *dev_priv = dev->dev_private; + int ret = 0; + + ret = intel_ddc_get_modes(intel_output); + + if (ret) + return ret; + + /* Didn't get an EDID, so + * Set wide sync ranges so we get all modes + * handed to valid_mode for checking + */ + connector->display_info.min_vfreq = 0; + connector->display_info.max_vfreq = 200; + connector->display_info.min_hfreq = 0; + connector->display_info.max_hfreq = 200; + + if (dev_priv->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + + mutex_unlock(&dev->mode_config.mutex); + mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + mutex_unlock(&dev->mode_config.mutex); + + return 1; + } + + return 0; +} + +/** + * intel_lvds_destroy - unregister and free LVDS structures + * @connector: connector to free + * + * Unregister the DDC bus for this connector then free the driver private + * structure. + */ +static void intel_lvds_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { + .dpms = intel_lvds_dpms, + .mode_fixup = intel_lvds_mode_fixup, + .prepare = intel_lvds_prepare, + .mode_set = intel_lvds_mode_set, + .commit = intel_lvds_commit, +}; + +static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { + .get_modes = intel_lvds_get_modes, + .mode_valid = intel_lvds_mode_valid, + .best_encoder = intel_best_encoder, +}; + +static const struct drm_connector_funcs intel_lvds_connector_funcs = { + .save = intel_lvds_save, + .restore = intel_lvds_restore, + .detect = intel_lvds_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_lvds_destroy, +}; + + +static void intel_lvds_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_lvds_enc_funcs = { + .destroy = intel_lvds_enc_destroy, +}; + + + +/** + * intel_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void intel_lvds_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + struct drm_crtc *crtc; + u32 lvds; + int pipe; + + intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); + if (!intel_output) { + return; + } + + connector = &intel_output->base; + encoder = &intel_output->enc; + drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + intel_output->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); + drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + /* Set up the DDC bus. */ + intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C"); + if (!intel_output->ddc_bus) { + dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " + "failed.\n"); + goto failed; + } + + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + intel_ddc_get_modes(intel_output); + + list_for_each_entry(scan, &connector->probed_modes, head) { + mutex_lock(&dev->mode_config.mutex); + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + mutex_unlock(&dev->mode_config.mutex); + goto out; /* FIXME: check for quirks */ + } + mutex_unlock(&dev->mode_config.mutex); + } + + /* Failed to get EDID, what about VBT? */ + if (dev_priv->vbt_mode) { + mutex_lock(&dev->mode_config.mutex); + dev_priv->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->vbt_mode); + mutex_unlock(&dev->mode_config.mutex); + } + + /* + * If we didn't get EDID, try checking if the panel is already turned + * on. If so, assume that whatever is currently programmed is the + * correct mode. + */ + lvds = I915_READ(LVDS); + pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; + crtc = intel_get_crtc_from_pipe(dev, pipe); + + if (crtc && (lvds & LVDS_PORT_EN)) { + dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); + if (dev_priv->panel_fixed_mode) { + dev_priv->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + } + + /* If we still don't have a mode after all that, give up. */ + if (!dev_priv->panel_fixed_mode) + goto failed; + + /* FIXME: detect aopen & mac mini type stuff automatically? */ + /* + * Blacklist machines with BIOSes that list an LVDS panel without + * actually having one. + */ + if (IS_I945GM(dev)) { + /* aopen mini pc */ + if (dev->pdev->subsystem_vendor == 0xa0a0) + goto failed; + + if ((dev->pdev->subsystem_vendor == 0x8086) && + (dev->pdev->subsystem_device == 0x7270)) { + /* It's a Mac Mini or Macbook Pro. + * + * Apple hardware is out to get us. The macbook pro + * has a real LVDS panel, but the mac mini does not, + * and they have the same device IDs. We'll + * distinguish by panel size, on the assumption + * that Apple isn't about to make any machines with an + * 800x600 display. + */ + + if (dev_priv->panel_fixed_mode != NULL && + dev_priv->panel_fixed_mode->hdisplay == 800 && + dev_priv->panel_fixed_mode->vdisplay == 600) { + DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n"); + goto failed; + } + } + } + + +out: + drm_sysfs_connector_add(connector); + return; + +failed: + DRM_DEBUG("No LVDS modes found, disabling.\n"); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_connector_cleanup(connector); + kfree(connector); +} diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c new file mode 100644 index 000000000000..e42019e5d661 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (c) 2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/i2c.h> +#include <linux/fb.h> +#include "drmP.h" +#include "intel_drv.h" + +/** + * intel_ddc_probe + * + */ +bool intel_ddc_probe(struct intel_output *intel_output) +{ + u8 out_buf[] = { 0x0, 0x0}; + u8 buf[2]; + int ret; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + if (ret == 2) + return true; + + return false; +} + +/** + * intel_ddc_get_modes - get modelist from monitor + * @connector: DRM connector device to use + * + * Fetch the EDID information from @connector using the DDC bus. + */ +int intel_ddc_get_modes(struct intel_output *intel_output) +{ + struct edid *edid; + int ret = 0; + + edid = drm_get_edid(&intel_output->base, + &intel_output->ddc_bus->adapter); + if (edid) { + drm_mode_connector_update_edid_property(&intel_output->base, + edid); + ret = drm_add_edid_modes(&intel_output->base, edid); + kfree(edid); + } + + return ret; +} diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c new file mode 100644 index 000000000000..626258d72c90 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -0,0 +1,1127 @@ +/* + * Copyright 2006 Dave Airlie <airlied@linux.ie> + * Copyright © 2006-2007 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ +#include <linux/i2c.h> +#include <linux/delay.h> +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include "intel_sdvo_regs.h" + +#undef SDVO_DEBUG + +struct intel_sdvo_priv { + struct intel_i2c_chan *i2c_bus; + int slaveaddr; + int output_device; + + u16 active_outputs; + + struct intel_sdvo_caps caps; + int pixel_clock_min, pixel_clock_max; + + int save_sdvo_mult; + u16 save_active_outputs; + struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2; + struct intel_sdvo_dtd save_output_dtd[16]; + u32 save_SDVOX; +}; + +/** + * Writes the SDVOB or SDVOC with the given value, but always writes both + * SDVOB and SDVOC to work around apparent hardware issues (according to + * comments in the BIOS). + */ +void intel_sdvo_write_sdvox(struct intel_output *intel_output, u32 val) +{ + struct drm_device *dev = intel_output->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 bval = val, cval = val; + int i; + + if (sdvo_priv->output_device == SDVOB) { + cval = I915_READ(SDVOC); + } else { + bval = I915_READ(SDVOB); + } + /* + * Write the registers twice for luck. Sometimes, + * writing them only once doesn't appear to 'stick'. + * The BIOS does this too. Yay, magic + */ + for (i = 0; i < 2; i++) + { + I915_WRITE(SDVOB, bval); + I915_READ(SDVOB); + I915_WRITE(SDVOC, cval); + I915_READ(SDVOC); + } +} + +static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr, + u8 *ch) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2]; + u8 buf[2]; + int ret; + + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = sdvo_priv->i2c_bus->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2) + { + *ch = buf[0]; + return true; + } + + DRM_DEBUG("i2c transfer returned %d\n", ret); + return false; +} + +static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, + u8 ch) +{ + u8 out_buf[2]; + struct i2c_msg msgs[] = { + { + .addr = intel_output->i2c_bus->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1) + { + return true; + } + return false; +} + +#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} +/** Mapping of command numbers to names, for debug output */ +const static struct _sdvo_cmd_name { + u8 cmd; + char *name; +} sdvo_cmd_names[] = { + SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT), + SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), +}; + +#define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC") +#define SDVO_PRIV(output) ((struct intel_sdvo_priv *) (output)->dev_priv) + +#ifdef SDVO_DEBUG +static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd, + void *args, int args_len) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int i; + + DRM_DEBUG("%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd); + for (i = 0; i < args_len; i++) + printk("%02X ", ((u8 *)args)[i]); + for (; i < 8; i++) + printk(" "); + for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { + if (cmd == sdvo_cmd_names[i].cmd) { + printk("(%s)", sdvo_cmd_names[i].name); + break; + } + } + if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) + printk("(%02X)",cmd); + printk("\n"); +} +#else +#define intel_sdvo_debug_write(o, c, a, l) +#endif + +static void intel_sdvo_write_cmd(struct intel_output *intel_output, u8 cmd, + void *args, int args_len) +{ + int i; + + intel_sdvo_debug_write(intel_output, cmd, args, args_len); + + for (i = 0; i < args_len; i++) { + intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0 - i, + ((u8*)args)[i]); + } + + intel_sdvo_write_byte(intel_output, SDVO_I2C_OPCODE, cmd); +} + +#ifdef SDVO_DEBUG +static const char *cmd_status_names[] = { + "Power on", + "Success", + "Not supported", + "Invalid arg", + "Pending", + "Target not specified", + "Scaling not supported" +}; + +static void intel_sdvo_debug_response(struct intel_output *intel_output, + void *response, int response_len, + u8 status) +{ + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + + DRM_DEBUG("%s: R: ", SDVO_NAME(sdvo_priv)); + for (i = 0; i < response_len; i++) + printk("%02X ", ((u8 *)response)[i]); + for (; i < 8; i++) + printk(" "); + if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) + printk("(%s)", cmd_status_names[status]); + else + printk("(??? %d)", status); + printk("\n"); +} +#else +#define intel_sdvo_debug_response(o, r, l, s) +#endif + +static u8 intel_sdvo_read_response(struct intel_output *intel_output, + void *response, int response_len) +{ + int i; + u8 status; + u8 retry = 50; + + while (retry--) { + /* Read the command response */ + for (i = 0; i < response_len; i++) { + intel_sdvo_read_byte(intel_output, + SDVO_I2C_RETURN_0 + i, + &((u8 *)response)[i]); + } + + /* read the return status */ + intel_sdvo_read_byte(intel_output, SDVO_I2C_CMD_STATUS, + &status); + + intel_sdvo_debug_response(intel_output, response, response_len, + status); + if (status != SDVO_CMD_STATUS_PENDING) + return status; + + mdelay(50); + } + + return status; +} + +int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) +{ + if (mode->clock >= 100000) + return 1; + else if (mode->clock >= 50000) + return 2; + else + return 4; +} + +/** + * Don't check status code from this as it switches the bus back to the + * SDVO chips which defeats the purpose of doing a bus switch in the first + * place. + */ +void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target) +{ + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); +} + +static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) +{ + struct intel_sdvo_set_target_input_args targets = {0}; + u8 status; + + if (target_0 && target_1) + return SDVO_CMD_STATUS_NOTSUPP; + + if (target_1) + targets.target_1 = 1; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_INPUT, &targets, + sizeof(targets)); + + status = intel_sdvo_read_response(intel_output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +/** + * Return whether each input is trained. + * + * This function is making an assumption about the layout of the response, + * which should be checked against the docs. + */ +static bool intel_sdvo_get_trained_inputs(struct intel_output *intel_output, bool *input_1, bool *input_2) +{ + struct intel_sdvo_get_trained_inputs_response response; + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, sizeof(response)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + *input_1 = response.input0_trained; + *input_2 = response.input1_trained; + return true; +} + +static bool intel_sdvo_get_active_outputs(struct intel_output *intel_output, + u16 *outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0); + status = intel_sdvo_read_response(intel_output, outputs, sizeof(*outputs)); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_active_outputs(struct intel_output *intel_output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs, + sizeof(outputs)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_set_encoder_power_state(struct intel_output *intel_output, + int mode) +{ + u8 status, state = SDVO_ENCODER_STATE_ON; + + switch (mode) { + case DRM_MODE_DPMS_ON: + state = SDVO_ENCODER_STATE_ON; + break; + case DRM_MODE_DPMS_STANDBY: + state = SDVO_ENCODER_STATE_STANDBY; + break; + case DRM_MODE_DPMS_SUSPEND: + state = SDVO_ENCODER_STATE_SUSPEND; + break; + case DRM_MODE_DPMS_OFF: + state = SDVO_ENCODER_STATE_OFF; + break; + } + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state, + sizeof(state)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_input_pixel_clock_range(struct intel_output *intel_output, + int *clock_min, + int *clock_max) +{ + struct intel_sdvo_pixel_clock_range clocks; + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, + NULL, 0); + + status = intel_sdvo_read_response(intel_output, &clocks, sizeof(clocks)); + + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + /* Convert the values from units of 10 kHz to kHz. */ + *clock_min = clocks.min * 10; + *clock_max = clocks.max * 10; + + return true; +} + +static bool intel_sdvo_set_target_output(struct intel_output *intel_output, + u16 outputs) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs, + sizeof(outputs)); + + status = intel_sdvo_read_response(intel_output, NULL, 0); + return (status == SDVO_CMD_STATUS_SUCCESS); +} + +static bool intel_sdvo_get_timing(struct intel_output *intel_output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, cmd, NULL, 0); + status = intel_sdvo_read_response(intel_output, &dtd->part1, + sizeof(dtd->part1)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(intel_output, cmd + 1, NULL, 0); + status = intel_sdvo_read_response(intel_output, &dtd->part2, + sizeof(dtd->part2)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_get_input_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(intel_output, + SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_get_output_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_get_timing(intel_output, + SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_timing(struct intel_output *intel_output, u8 cmd, + struct intel_sdvo_dtd *dtd) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, cmd, &dtd->part1, sizeof(dtd->part1)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + intel_sdvo_write_cmd(intel_output, cmd + 1, &dtd->part2, sizeof(dtd->part2)); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_set_input_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(intel_output, + SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); +} + +static bool intel_sdvo_set_output_timing(struct intel_output *intel_output, + struct intel_sdvo_dtd *dtd) +{ + return intel_sdvo_set_timing(intel_output, + SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); +} + + +static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output) +{ + u8 response, status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 1); + + if (status != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n"); + return SDVO_CLOCK_RATE_MULT_1X; + } else { + DRM_DEBUG("Current clock rate multiplier: %d\n", response); + } + + return response; +} + +static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 val) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); + status = intel_sdvo_read_response(intel_output, NULL, 0); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + /* Make the CRTC code factor in the SDVO pixel multiplier. The SDVO + * device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); + return true; +} + +static void intel_sdvo_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u16 width, height; + u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len; + u16 h_sync_offset, v_sync_offset; + u32 sdvox; + struct intel_sdvo_dtd output_dtd; + int sdvo_pixel_multiply; + + if (!mode) + return; + + width = mode->crtc_hdisplay; + height = mode->crtc_vdisplay; + + /* do some mode translations */ + h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start; + h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; + + v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start; + v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; + + h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; + v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; + + output_dtd.part1.clock = mode->clock / 10; + output_dtd.part1.h_active = width & 0xff; + output_dtd.part1.h_blank = h_blank_len & 0xff; + output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) | + ((h_blank_len >> 8) & 0xf); + output_dtd.part1.v_active = height & 0xff; + output_dtd.part1.v_blank = v_blank_len & 0xff; + output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) | + ((v_blank_len >> 8) & 0xf); + + output_dtd.part2.h_sync_off = h_sync_offset; + output_dtd.part2.h_sync_width = h_sync_len & 0xff; + output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | + (v_sync_len & 0xf); + output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | + ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | + ((v_sync_len & 0x30) >> 4); + + output_dtd.part2.dtd_flags = 0x18; + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + output_dtd.part2.dtd_flags |= 0x2; + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + output_dtd.part2.dtd_flags |= 0x4; + + output_dtd.part2.sdvo_flags = 0; + output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0; + output_dtd.part2.reserved = 0; + + /* Set the output timing to the screen */ + intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs); + intel_sdvo_set_output_timing(intel_output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(intel_output, true, false); + + /* We would like to use i830_sdvo_create_preferred_input_timing() to + * provide the device with a timing it can support, if it supports that + * feature. However, presumably we would need to adjust the CRTC to + * output the preferred timing, and we don't support that currently. + */ + intel_sdvo_set_input_timing(intel_output, &output_dtd); + + switch (intel_sdvo_get_pixel_multiplier(mode)) { + case 1: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_1X); + break; + case 2: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_2X); + break; + case 4: + intel_sdvo_set_clock_rate_mult(intel_output, + SDVO_CLOCK_RATE_MULT_4X); + break; + } + + /* Set the SDVO control regs. */ + if (0/*IS_I965GM(dev)*/) { + sdvox = SDVO_BORDER_ENABLE; + } else { + sdvox = I915_READ(sdvo_priv->output_device); + switch (sdvo_priv->output_device) { + case SDVOB: + sdvox &= SDVOB_PRESERVE_MASK; + break; + case SDVOC: + sdvox &= SDVOC_PRESERVE_MASK; + break; + } + sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; + } + if (intel_crtc->pipe == 1) + sdvox |= SDVO_PIPE_B_SELECT; + + sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode); + if (IS_I965G(dev)) { + /* done in crtc_mode_set as the dpll_md reg must be written + early */ + } else if (IS_I945G(dev) || IS_I945GM(dev)) { + /* done in crtc_mode_set as it lives inside the + dpll register */ + } else { + sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; + } + + intel_sdvo_write_sdvox(intel_output, sdvox); +} + +static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u32 temp; + + if (mode != DRM_MODE_DPMS_ON) { + intel_sdvo_set_active_outputs(intel_output, 0); + if (0) + intel_sdvo_set_encoder_power_state(intel_output, mode); + + if (mode == DRM_MODE_DPMS_OFF) { + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) != 0) { + intel_sdvo_write_sdvox(intel_output, temp & ~SDVO_ENABLE); + } + } + } else { + bool input1, input2; + int i; + u8 status; + + temp = I915_READ(sdvo_priv->output_device); + if ((temp & SDVO_ENABLE) == 0) + intel_sdvo_write_sdvox(intel_output, temp | SDVO_ENABLE); + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + + status = intel_sdvo_get_trained_inputs(intel_output, &input1, + &input2); + + + /* Warn if the device reported failure to sync. + * A lot of SDVO devices fail to notify of sync, but it's + * a given it the status is a success, we succeeded. + */ + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { + DRM_DEBUG("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + if (0) + intel_sdvo_set_encoder_power_state(intel_output, mode); + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs); + } + return; +} + +static void intel_sdvo_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + + sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_output); + intel_sdvo_get_active_outputs(intel_output, &sdvo_priv->save_active_outputs); + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_get_input_timing(intel_output, + &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(intel_output, false, true); + intel_sdvo_get_input_timing(intel_output, + &sdvo_priv->save_input_dtd_2); + } + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) + { + intel_sdvo_set_target_output(intel_output, this_output); + intel_sdvo_get_output_timing(intel_output, + &sdvo_priv->save_output_dtd[o]); + } + } + + sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device); +} + +static void intel_sdvo_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + int o; + int i; + bool input1, input2; + u8 status; + + intel_sdvo_set_active_outputs(intel_output, 0); + + for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++) + { + u16 this_output = (1 << o); + if (sdvo_priv->caps.output_flags & this_output) { + intel_sdvo_set_target_output(intel_output, this_output); + intel_sdvo_set_output_timing(intel_output, &sdvo_priv->save_output_dtd[o]); + } + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) { + intel_sdvo_set_target_input(intel_output, true, false); + intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_1); + } + + if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) { + intel_sdvo_set_target_input(intel_output, false, true); + intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_2); + } + + intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult); + + I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX); + + if (sdvo_priv->save_SDVOX & SDVO_ENABLE) + { + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev); + status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2); + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) + DRM_DEBUG("First %s output reported failure to sync\n", + SDVO_NAME(sdvo_priv)); + } + + intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs); +} + +static int intel_sdvo_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (sdvo_priv->pixel_clock_min > mode->clock) + return MODE_CLOCK_LOW; + + if (sdvo_priv->pixel_clock_max < mode->clock) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static bool intel_sdvo_get_capabilities(struct intel_output *intel_output, struct intel_sdvo_caps *caps) +{ + u8 status; + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0); + status = intel_sdvo_read_response(intel_output, caps, sizeof(*caps)); + if (status != SDVO_CMD_STATUS_SUCCESS) + return false; + + return true; +} + +struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB) +{ + struct drm_connector *connector = NULL; + struct intel_output *iout = NULL; + struct intel_sdvo_priv *sdvo; + + /* find the sdvo connector */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + iout = to_intel_output(connector); + + if (iout->type != INTEL_OUTPUT_SDVO) + continue; + + sdvo = iout->dev_priv; + + if (sdvo->output_device == SDVOB && sdvoB) + return connector; + + if (sdvo->output_device == SDVOC && !sdvoB) + return connector; + + } + + return NULL; +} + +int intel_sdvo_supports_hotplug(struct drm_connector *connector) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output; + DRM_DEBUG("\n"); + + if (!connector) + return 0; + + intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + if (response[0] !=0) + return 1; + + return 0; +} + +void intel_sdvo_set_hotplug(struct drm_connector *connector, int on) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); + intel_sdvo_read_response(intel_output, &response, 2); + + if (on) { + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); + } else { + response[0] = 0; + response[1] = 0; + intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2); + } + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0); + intel_sdvo_read_response(intel_output, &response, 2); +} + +static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector) +{ + u8 response[2]; + u8 status; + struct intel_output *intel_output = to_intel_output(connector); + + intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0); + status = intel_sdvo_read_response(intel_output, &response, 2); + + DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]); + if ((response[0] != 0) || (response[1] != 0)) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static int intel_sdvo_get_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2); + intel_ddc_get_modes(intel_output); + + if (list_empty(&connector->probed_modes)) + return 0; + return 1; +} + +static void intel_sdvo_destroy(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + if (intel_output->i2c_bus) + intel_i2c_destroy(intel_output->i2c_bus); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(intel_output); +} + +static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { + .dpms = intel_sdvo_dpms, + .mode_fixup = intel_sdvo_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_sdvo_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_sdvo_connector_funcs = { + .save = intel_sdvo_save, + .restore = intel_sdvo_restore, + .detect = intel_sdvo_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = intel_sdvo_destroy, +}; + +static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = { + .get_modes = intel_sdvo_get_modes, + .mode_valid = intel_sdvo_mode_valid, + .best_encoder = intel_best_encoder, +}; + +void intel_sdvo_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { + .destroy = intel_sdvo_enc_destroy, +}; + + +void intel_sdvo_init(struct drm_device *dev, int output_device) +{ + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct intel_i2c_chan *i2cbus = NULL; + int connector_type; + u8 ch[0x40]; + int i; + int encoder_type, output_id; + + intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL); + if (!intel_output) { + return; + } + + connector = &intel_output->base; + + drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, + DRM_MODE_CONNECTOR_Unknown); + drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); + sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); + intel_output->type = INTEL_OUTPUT_SDVO; + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + /* setup the DDC bus. */ + if (output_device == SDVOB) + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); + else + i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); + + if (!i2cbus) + goto err_connector; + + sdvo_priv->i2c_bus = i2cbus; + + if (output_device == SDVOB) { + output_id = 1; + sdvo_priv->i2c_bus->slave_addr = 0x38; + } else { + output_id = 2; + sdvo_priv->i2c_bus->slave_addr = 0x39; + } + + sdvo_priv->output_device = output_device; + intel_output->i2c_bus = i2cbus; + intel_output->dev_priv = sdvo_priv; + + + /* Read the regs to test if we can talk to the device */ + for (i = 0; i < 0x40; i++) { + if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { + DRM_DEBUG("No SDVO device found on SDVO%c\n", + output_device == SDVOB ? 'B' : 'C'); + goto err_i2c; + } + } + + intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); + + memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs)); + + /* TODO, CVBS, SVID, YPRPB & SCART outputs. */ + if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_DAC; + connector_type = DRM_MODE_CONNECTOR_VGA; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_DAC; + connector_type = DRM_MODE_CONNECTOR_VGA; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; + } + else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1) + { + sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + encoder_type = DRM_MODE_ENCODER_TMDS; + connector_type = DRM_MODE_CONNECTOR_DVID; + } + else + { + unsigned char bytes[2]; + + memcpy (bytes, &sdvo_priv->caps.output_flags, 2); + DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n", + SDVO_NAME(sdvo_priv), + bytes[0], bytes[1]); + goto err_i2c; + } + + drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); + drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); + connector->connector_type = connector_type; + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + drm_sysfs_connector_add(connector); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(intel_output, true, false); + + intel_sdvo_get_input_pixel_clock_range(intel_output, + &sdvo_priv->pixel_clock_min, + &sdvo_priv->pixel_clock_max); + + + DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, " + "clock range %dMHz - %dMHz, " + "input 1: %c, input 2: %c, " + "output 1: %c, output 2: %c\n", + SDVO_NAME(sdvo_priv), + sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id, + sdvo_priv->caps.device_rev_id, + sdvo_priv->pixel_clock_min / 1000, + sdvo_priv->pixel_clock_max / 1000, + (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', + (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', + /* check currently supported outputs */ + sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', + sdvo_priv->caps.output_flags & + (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); + + intel_output->ddc_bus = i2cbus; + + return; + +err_i2c: + intel_i2c_destroy(intel_output->i2c_bus); +err_connector: + drm_connector_cleanup(connector); + kfree(intel_output); + + return; +} diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h new file mode 100644 index 000000000000..861a43f8693c --- /dev/null +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -0,0 +1,327 @@ +/* + * Copyright © 2006-2007 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + */ + +/** + * @file SDVO command definitions and structures. + */ + +#define SDVO_OUTPUT_FIRST (0) +#define SDVO_OUTPUT_TMDS0 (1 << 0) +#define SDVO_OUTPUT_RGB0 (1 << 1) +#define SDVO_OUTPUT_CVBS0 (1 << 2) +#define SDVO_OUTPUT_SVID0 (1 << 3) +#define SDVO_OUTPUT_YPRPB0 (1 << 4) +#define SDVO_OUTPUT_SCART0 (1 << 5) +#define SDVO_OUTPUT_LVDS0 (1 << 6) +#define SDVO_OUTPUT_TMDS1 (1 << 8) +#define SDVO_OUTPUT_RGB1 (1 << 9) +#define SDVO_OUTPUT_CVBS1 (1 << 10) +#define SDVO_OUTPUT_SVID1 (1 << 11) +#define SDVO_OUTPUT_YPRPB1 (1 << 12) +#define SDVO_OUTPUT_SCART1 (1 << 13) +#define SDVO_OUTPUT_LVDS1 (1 << 14) +#define SDVO_OUTPUT_LAST (14) + +struct intel_sdvo_caps { + u8 vendor_id; + u8 device_id; + u8 device_rev_id; + u8 sdvo_version_major; + u8 sdvo_version_minor; + unsigned int sdvo_inputs_mask:2; + unsigned int smooth_scaling:1; + unsigned int sharp_scaling:1; + unsigned int up_scaling:1; + unsigned int down_scaling:1; + unsigned int stall_support:1; + unsigned int pad:1; + u16 output_flags; +} __attribute__((packed)); + +/** This matches the EDID DTD structure, more or less */ +struct intel_sdvo_dtd { + struct { + u16 clock; /**< pixel clock, in 10kHz units */ + u8 h_active; /**< lower 8 bits (pixels) */ + u8 h_blank; /**< lower 8 bits (pixels) */ + u8 h_high; /**< upper 4 bits each h_active, h_blank */ + u8 v_active; /**< lower 8 bits (lines) */ + u8 v_blank; /**< lower 8 bits (lines) */ + u8 v_high; /**< upper 4 bits each v_active, v_blank */ + } part1; + + struct { + u8 h_sync_off; /**< lower 8 bits, from hblank start */ + u8 h_sync_width; /**< lower 8 bits (pixels) */ + /** lower 4 bits each vsync offset, vsync width */ + u8 v_sync_off_width; + /** + * 2 high bits of hsync offset, 2 high bits of hsync width, + * bits 4-5 of vsync offset, and 2 high bits of vsync width. + */ + u8 sync_off_width_high; + u8 dtd_flags; + u8 sdvo_flags; + /** bits 6-7 of vsync offset at bits 6-7 */ + u8 v_sync_off_high; + u8 reserved; + } part2; +} __attribute__((packed)); + +struct intel_sdvo_pixel_clock_range { + u16 min; /**< pixel clock, in 10kHz units */ + u16 max; /**< pixel clock, in 10kHz units */ +} __attribute__((packed)); + +struct intel_sdvo_preferred_input_timing_args { + u16 clock; + u16 width; + u16 height; +} __attribute__((packed)); + +/* I2C registers for SDVO */ +#define SDVO_I2C_ARG_0 0x07 +#define SDVO_I2C_ARG_1 0x06 +#define SDVO_I2C_ARG_2 0x05 +#define SDVO_I2C_ARG_3 0x04 +#define SDVO_I2C_ARG_4 0x03 +#define SDVO_I2C_ARG_5 0x02 +#define SDVO_I2C_ARG_6 0x01 +#define SDVO_I2C_ARG_7 0x00 +#define SDVO_I2C_OPCODE 0x08 +#define SDVO_I2C_CMD_STATUS 0x09 +#define SDVO_I2C_RETURN_0 0x0a +#define SDVO_I2C_RETURN_1 0x0b +#define SDVO_I2C_RETURN_2 0x0c +#define SDVO_I2C_RETURN_3 0x0d +#define SDVO_I2C_RETURN_4 0x0e +#define SDVO_I2C_RETURN_5 0x0f +#define SDVO_I2C_RETURN_6 0x10 +#define SDVO_I2C_RETURN_7 0x11 +#define SDVO_I2C_VENDOR_BEGIN 0x20 + +/* Status results */ +#define SDVO_CMD_STATUS_POWER_ON 0x0 +#define SDVO_CMD_STATUS_SUCCESS 0x1 +#define SDVO_CMD_STATUS_NOTSUPP 0x2 +#define SDVO_CMD_STATUS_INVALID_ARG 0x3 +#define SDVO_CMD_STATUS_PENDING 0x4 +#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5 +#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6 + +/* SDVO commands, argument/result registers */ + +#define SDVO_CMD_RESET 0x01 + +/** Returns a struct intel_sdvo_caps */ +#define SDVO_CMD_GET_DEVICE_CAPS 0x02 + +#define SDVO_CMD_GET_FIRMWARE_REV 0x86 +# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0 +# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1 +# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2 + +/** + * Reports which inputs are trained (managed to sync). + * + * Devices must have trained within 2 vsyncs of a mode change. + */ +#define SDVO_CMD_GET_TRAINED_INPUTS 0x03 +struct intel_sdvo_get_trained_inputs_response { + unsigned int input0_trained:1; + unsigned int input1_trained:1; + unsigned int pad:6; +} __attribute__((packed)); + +/** Returns a struct intel_sdvo_output_flags of active outputs. */ +#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04 + +/** + * Sets the current set of active outputs. + * + * Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP + * on multi-output devices. + */ +#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05 + +/** + * Returns the current mapping of SDVO inputs to outputs on the device. + * + * Returns two struct intel_sdvo_output_flags structures. + */ +#define SDVO_CMD_GET_IN_OUT_MAP 0x06 + +/** + * Sets the current mapping of SDVO inputs to outputs on the device. + * + * Takes two struct i380_sdvo_output_flags structures. + */ +#define SDVO_CMD_SET_IN_OUT_MAP 0x07 + +/** + * Returns a struct intel_sdvo_output_flags of attached displays. + */ +#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b + +/** + * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging. + */ +#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c + +/** + * Takes a struct intel_sdvo_output_flags. + */ +#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d + +/** + * Returns a struct intel_sdvo_output_flags of displays with hot plug + * interrupts enabled. + */ +#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e + +#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f +struct intel_sdvo_get_interrupt_event_source_response { + u16 interrupt_status; + unsigned int ambient_light_interrupt:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Selects which input is affected by future input commands. + * + * Commands affected include SET_INPUT_TIMINGS_PART[12], + * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12], + * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS. + */ +#define SDVO_CMD_SET_TARGET_INPUT 0x10 +struct intel_sdvo_set_target_input_args { + unsigned int target_1:1; + unsigned int pad:7; +} __attribute__((packed)); + +/** + * Takes a struct intel_sdvo_output_flags of which outputs are targetted by + * future output commands. + * + * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12], + * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE. + */ +#define SDVO_CMD_SET_TARGET_OUTPUT 0x11 + +#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12 +#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14 +#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16 +#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18 +#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19 +/* Part 1 */ +# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2 +# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3 +# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4 +# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5 +# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6 +# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7 +/* Part 2 */ +# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0 +# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1 +# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2 +# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4 +# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7) +# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5) +# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3) +# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1) +# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5 +# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7) +# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6) +# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6) +# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4) +# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4) +# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6 + +/** + * Generates a DTD based on the given width, height, and flags. + * + * This will be supported by any device supporting scaling or interlaced + * modes. + */ +#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0 +# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2 +# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4 +# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6 +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0) +# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1) + +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b +#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c + +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d +/** Returns a struct intel_sdvo_pixel_clock_range */ +#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e + +/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */ +#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f + +/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20 +/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */ +#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21 +# define SDVO_CLOCK_RATE_MULT_1X (1 << 0) +# define SDVO_CLOCK_RATE_MULT_2X (1 << 1) +# define SDVO_CLOCK_RATE_MULT_4X (1 << 3) + +#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27 + +#define SDVO_CMD_GET_TV_FORMAT 0x28 + +#define SDVO_CMD_SET_TV_FORMAT 0x29 + +#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a +#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b +#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c +# define SDVO_ENCODER_STATE_ON (1 << 0) +# define SDVO_ENCODER_STATE_STANDBY (1 << 1) +# define SDVO_ENCODER_STATE_SUSPEND (1 << 2) +# define SDVO_ENCODER_STATE_OFF (1 << 3) + +#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93 + +#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a +# define SDVO_CONTROL_BUS_PROM 0x0 +# define SDVO_CONTROL_BUS_DDC1 0x1 +# define SDVO_CONTROL_BUS_DDC2 0x2 +# define SDVO_CONTROL_BUS_DDC3 0x3 diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c new file mode 100644 index 000000000000..d409b8637883 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -0,0 +1,1725 @@ +/* + * Copyright © 2006-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +/** @file + * Integrated TV-out support for the 915GM and 945GM. + */ + +#include "drmP.h" +#include "drm.h" +#include "drm_crtc.h" +#include "drm_edid.h" +#include "intel_drv.h" +#include "i915_drm.h" +#include "i915_drv.h" + +enum tv_margin { + TV_MARGIN_LEFT, TV_MARGIN_TOP, + TV_MARGIN_RIGHT, TV_MARGIN_BOTTOM +}; + +/** Private structure for the integrated TV support */ +struct intel_tv_priv { + int type; + char *tv_format; + int margin[4]; + u32 save_TV_H_CTL_1; + u32 save_TV_H_CTL_2; + u32 save_TV_H_CTL_3; + u32 save_TV_V_CTL_1; + u32 save_TV_V_CTL_2; + u32 save_TV_V_CTL_3; + u32 save_TV_V_CTL_4; + u32 save_TV_V_CTL_5; + u32 save_TV_V_CTL_6; + u32 save_TV_V_CTL_7; + u32 save_TV_SC_CTL_1, save_TV_SC_CTL_2, save_TV_SC_CTL_3; + + u32 save_TV_CSC_Y; + u32 save_TV_CSC_Y2; + u32 save_TV_CSC_U; + u32 save_TV_CSC_U2; + u32 save_TV_CSC_V; + u32 save_TV_CSC_V2; + u32 save_TV_CLR_KNOBS; + u32 save_TV_CLR_LEVEL; + u32 save_TV_WIN_POS; + u32 save_TV_WIN_SIZE; + u32 save_TV_FILTER_CTL_1; + u32 save_TV_FILTER_CTL_2; + u32 save_TV_FILTER_CTL_3; + + u32 save_TV_H_LUMA[60]; + u32 save_TV_H_CHROMA[60]; + u32 save_TV_V_LUMA[43]; + u32 save_TV_V_CHROMA[43]; + + u32 save_TV_DAC; + u32 save_TV_CTL; +}; + +struct video_levels { + int blank, black, burst; +}; + +struct color_conversion { + u16 ry, gy, by, ay; + u16 ru, gu, bu, au; + u16 rv, gv, bv, av; +}; + +static const u32 filter_table[] = { + 0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140, + 0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000, + 0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160, + 0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780, + 0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50, + 0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20, + 0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0, + 0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0, + 0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020, + 0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140, + 0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20, + 0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848, + 0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900, + 0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080, + 0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060, + 0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140, + 0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000, + 0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160, + 0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780, + 0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50, + 0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20, + 0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0, + 0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0, + 0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020, + 0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140, + 0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20, + 0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848, + 0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900, + 0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080, + 0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060, + 0x36403000, 0x2D002CC0, 0x30003640, 0x2D0036C0, + 0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540, + 0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00, + 0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000, + 0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00, + 0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40, + 0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240, + 0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00, + 0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0, + 0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840, + 0x28003100, 0x28002F00, 0x00003100, 0x36403000, + 0x2D002CC0, 0x30003640, 0x2D0036C0, + 0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540, + 0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00, + 0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000, + 0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00, + 0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40, + 0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240, + 0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00, + 0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0, + 0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840, + 0x28003100, 0x28002F00, 0x00003100, +}; + +/* + * Color conversion values have 3 separate fixed point formats: + * + * 10 bit fields (ay, au) + * 1.9 fixed point (b.bbbbbbbbb) + * 11 bit fields (ry, by, ru, gu, gv) + * exp.mantissa (ee.mmmmmmmmm) + * ee = 00 = 10^-1 (0.mmmmmmmmm) + * ee = 01 = 10^-2 (0.0mmmmmmmmm) + * ee = 10 = 10^-3 (0.00mmmmmmmmm) + * ee = 11 = 10^-4 (0.000mmmmmmmmm) + * 12 bit fields (gy, rv, bu) + * exp.mantissa (eee.mmmmmmmmm) + * eee = 000 = 10^-1 (0.mmmmmmmmm) + * eee = 001 = 10^-2 (0.0mmmmmmmmm) + * eee = 010 = 10^-3 (0.00mmmmmmmmm) + * eee = 011 = 10^-4 (0.000mmmmmmmmm) + * eee = 100 = reserved + * eee = 101 = reserved + * eee = 110 = reserved + * eee = 111 = 10^0 (m.mmmmmmmm) (only usable for 1.0 representation) + * + * Saturation and contrast are 8 bits, with their own representation: + * 8 bit field (saturation, contrast) + * exp.mantissa (ee.mmmmmm) + * ee = 00 = 10^-1 (0.mmmmmm) + * ee = 01 = 10^0 (m.mmmmm) + * ee = 10 = 10^1 (mm.mmmm) + * ee = 11 = 10^2 (mmm.mmm) + * + * Simple conversion function: + * + * static u32 + * float_to_csc_11(float f) + * { + * u32 exp; + * u32 mant; + * u32 ret; + * + * if (f < 0) + * f = -f; + * + * if (f >= 1) { + * exp = 0x7; + * mant = 1 << 8; + * } else { + * for (exp = 0; exp < 3 && f < 0.5; exp++) + * f *= 2.0; + * mant = (f * (1 << 9) + 0.5); + * if (mant >= (1 << 9)) + * mant = (1 << 9) - 1; + * } + * ret = (exp << 9) | mant; + * return ret; + * } + */ + +/* + * Behold, magic numbers! If we plant them they might grow a big + * s-video cable to the sky... or something. + * + * Pre-converted to appropriate hex value. + */ + +/* + * PAL & NTSC values for composite & s-video connections + */ +static const struct color_conversion ntsc_m_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels ntsc_m_levels_composite = { + .blank = 225, .black = 267, .burst = 113, +}; + +static const struct color_conversion ntsc_m_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels ntsc_m_levels_svideo = { + .blank = 266, .black = 316, .burst = 133, +}; + +static const struct color_conversion ntsc_j_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0119, + .ru = 0x074c, .gu = 0x0546, .bu = 0x05ec, .au = 0x0f00, + .rv = 0x035a, .gv = 0x0322, .bv = 0x06e1, .av = 0x0f00, +}; + +static const struct video_levels ntsc_j_levels_composite = { + .blank = 225, .black = 225, .burst = 113, +}; + +static const struct color_conversion ntsc_j_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x014c, + .ru = 0x0788, .gu = 0x0581, .bu = 0x0322, .au = 0x0f00, + .rv = 0x0399, .gv = 0x0356, .bv = 0x070a, .av = 0x0f00, +}; + +static const struct video_levels ntsc_j_levels_svideo = { + .blank = 266, .black = 266, .burst = 133, +}; + +static const struct color_conversion pal_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0113, + .ru = 0x0745, .gu = 0x053f, .bu = 0x05e1, .au = 0x0f00, + .rv = 0x0353, .gv = 0x031c, .bv = 0x06dc, .av = 0x0f00, +}; + +static const struct video_levels pal_levels_composite = { + .blank = 237, .black = 237, .burst = 118, +}; + +static const struct color_conversion pal_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145, + .ru = 0x0780, .gu = 0x0579, .bu = 0x031c, .au = 0x0f00, + .rv = 0x0390, .gv = 0x034f, .bv = 0x0705, .av = 0x0f00, +}; + +static const struct video_levels pal_levels_svideo = { + .blank = 280, .black = 280, .burst = 139, +}; + +static const struct color_conversion pal_m_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels pal_m_levels_composite = { + .blank = 225, .black = 267, .burst = 113, +}; + +static const struct color_conversion pal_m_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels pal_m_levels_svideo = { + .blank = 266, .black = 316, .burst = 133, +}; + +static const struct color_conversion pal_n_csc_composite = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104, + .ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00, + .rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00, +}; + +static const struct video_levels pal_n_levels_composite = { + .blank = 225, .black = 267, .burst = 118, +}; + +static const struct color_conversion pal_n_csc_svideo = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134, + .ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00, + .rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00, +}; + +static const struct video_levels pal_n_levels_svideo = { + .blank = 266, .black = 316, .burst = 139, +}; + +/* + * Component connections + */ +static const struct color_conversion sdtv_csc_yprpb = { + .ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0146, + .ru = 0x0559, .gu = 0x0353, .bu = 0x0100, .au = 0x0f00, + .rv = 0x0100, .gv = 0x03ad, .bv = 0x074d, .av = 0x0f00, +}; + +static const struct color_conversion sdtv_csc_rgb = { + .ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166, + .ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166, + .rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166, +}; + +static const struct color_conversion hdtv_csc_yprpb = { + .ry = 0x05b3, .gy = 0x016e, .by = 0x0728, .ay = 0x0146, + .ru = 0x07d5, .gu = 0x038b, .bu = 0x0100, .au = 0x0f00, + .rv = 0x0100, .gv = 0x03d1, .bv = 0x06bc, .av = 0x0f00, +}; + +static const struct color_conversion hdtv_csc_rgb = { + .ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166, + .ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166, + .rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166, +}; + +static const struct video_levels component_levels = { + .blank = 279, .black = 279, .burst = 0, +}; + + +struct tv_mode { + char *name; + int clock; + int refresh; /* in millihertz (for precision) */ + u32 oversample; + int hsync_end, hblank_start, hblank_end, htotal; + bool progressive, trilevel_sync, component_only; + int vsync_start_f1, vsync_start_f2, vsync_len; + bool veq_ena; + int veq_start_f1, veq_start_f2, veq_len; + int vi_end_f1, vi_end_f2, nbr_end; + bool burst_ena; + int hburst_start, hburst_len; + int vburst_start_f1, vburst_end_f1; + int vburst_start_f2, vburst_end_f2; + int vburst_start_f3, vburst_end_f3; + int vburst_start_f4, vburst_end_f4; + /* + * subcarrier programming + */ + int dda2_size, dda3_size, dda1_inc, dda2_inc, dda3_inc; + u32 sc_reset; + bool pal_burst; + /* + * blank/black levels + */ + const struct video_levels *composite_levels, *svideo_levels; + const struct color_conversion *composite_color, *svideo_color; + const u32 *filter_table; + int max_srcw; +}; + + +/* + * Sub carrier DDA + * + * I think this works as follows: + * + * subcarrier freq = pixel_clock * (dda1_inc + dda2_inc / dda2_size) / 4096 + * + * Presumably, when dda3 is added in, it gets to adjust the dda2_inc value + * + * So, + * dda1_ideal = subcarrier/pixel * 4096 + * dda1_inc = floor (dda1_ideal) + * dda2 = dda1_ideal - dda1_inc + * + * then pick a ratio for dda2 that gives the closest approximation. If + * you can't get close enough, you can play with dda3 as well. This + * seems likely to happen when dda2 is small as the jumps would be larger + * + * To invert this, + * + * pixel_clock = subcarrier * 4096 / (dda1_inc + dda2_inc / dda2_size) + * + * The constants below were all computed using a 107.520MHz clock + */ + +/** + * Register programming values for TV modes. + * + * These values account for -1s required. + */ + +const static struct tv_mode tv_modes[] = { + { + .name = "NTSC-M", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = false, .trilevel_sync = false, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = true, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = false, + + .composite_levels = &ntsc_m_levels_composite, + .composite_color = &ntsc_m_csc_composite, + .svideo_levels = &ntsc_m_levels_svideo, + .svideo_color = &ntsc_m_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "NTSC-443", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = false, .trilevel_sync = false, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = 8, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = true, + + .composite_levels = &ntsc_m_levels_composite, + .composite_color = &ntsc_m_csc_composite, + .svideo_levels = &ntsc_m_levels_svideo, + .svideo_color = &ntsc_m_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "NTSC-J", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = false, .trilevel_sync = false, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = true, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = false, + + .composite_levels = &ntsc_j_levels_composite, + .composite_color = &ntsc_j_csc_composite, + .svideo_levels = &ntsc_j_levels_svideo, + .svideo_color = &ntsc_j_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "PAL-M", + .clock = 107520, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ + .hsync_end = 64, .hblank_end = 124, + .hblank_start = 836, .htotal = 857, + + .progressive = false, .trilevel_sync = false, + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 20, .vi_end_f2 = 21, + .nbr_end = 240, + + .burst_ena = true, + .hburst_start = 72, .hburst_len = 34, + .vburst_start_f1 = 9, .vburst_end_f1 = 240, + .vburst_start_f2 = 10, .vburst_end_f2 = 240, + .vburst_start_f3 = 9, .vburst_end_f3 = 240, + .vburst_start_f4 = 10, .vburst_end_f4 = 240, + + /* desired 3.5800000 actual 3.5800000 clock 107.52 */ + .dda1_inc = 136, + .dda2_inc = 7624, .dda2_size = 20013, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_4, + .pal_burst = false, + + .composite_levels = &pal_m_levels_composite, + .composite_color = &pal_m_csc_composite, + .svideo_levels = &pal_m_levels_svideo, + .svideo_color = &pal_m_csc_svideo, + + .filter_table = filter_table, + }, + { + /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ + .name = "PAL-N", + .clock = 107520, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + .hsync_end = 64, .hblank_end = 128, + .hblank_start = 844, .htotal = 863, + + .progressive = false, .trilevel_sync = false, + + + .vsync_start_f1 = 6, .vsync_start_f2 = 7, + .vsync_len = 6, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 18, + + .vi_end_f1 = 24, .vi_end_f2 = 25, + .nbr_end = 286, + + .burst_ena = true, + .hburst_start = 73, .hburst_len = 34, + .vburst_start_f1 = 8, .vburst_end_f1 = 285, + .vburst_start_f2 = 8, .vburst_end_f2 = 286, + .vburst_start_f3 = 9, .vburst_end_f3 = 286, + .vburst_start_f4 = 9, .vburst_end_f4 = 285, + + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = true, + + .composite_levels = &pal_n_levels_composite, + .composite_color = &pal_n_csc_composite, + .svideo_levels = &pal_n_levels_svideo, + .svideo_color = &pal_n_csc_svideo, + + .filter_table = filter_table, + }, + { + /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ + .name = "PAL", + .clock = 107520, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_8X, + .component_only = 0, + + .hsync_end = 64, .hblank_end = 128, + .hblank_start = 844, .htotal = 863, + + .progressive = false, .trilevel_sync = false, + + .vsync_start_f1 = 5, .vsync_start_f2 = 6, + .vsync_len = 5, + + .veq_ena = true, .veq_start_f1 = 0, + .veq_start_f2 = 1, .veq_len = 15, + + .vi_end_f1 = 24, .vi_end_f2 = 25, + .nbr_end = 286, + + .burst_ena = true, + .hburst_start = 73, .hburst_len = 32, + .vburst_start_f1 = 8, .vburst_end_f1 = 285, + .vburst_start_f2 = 8, .vburst_end_f2 = 286, + .vburst_start_f3 = 9, .vburst_end_f3 = 286, + .vburst_start_f4 = 9, .vburst_end_f4 = 285, + + /* desired 4.4336180 actual 4.4336180 clock 107.52 */ + .dda1_inc = 168, + .dda2_inc = 18557, .dda2_size = 20625, + .dda3_inc = 0, .dda3_size = 0, + .sc_reset = TV_SC_RESET_EVERY_8, + .pal_burst = true, + + .composite_levels = &pal_levels_composite, + .composite_color = &pal_csc_composite, + .svideo_levels = &pal_levels_svideo, + .svideo_color = &pal_csc_svideo, + + .filter_table = filter_table, + }, + { + .name = "480p@59.94Hz", + .clock = 107520, + .refresh = 59940, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 122, + .hblank_start = 842, .htotal = 857, + + .progressive = true,.trilevel_sync = false, + + .vsync_start_f1 = 12, .vsync_start_f2 = 12, + .vsync_len = 12, + + .veq_ena = false, + + .vi_end_f1 = 44, .vi_end_f2 = 44, + .nbr_end = 496, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "480p@60Hz", + .clock = 107520, + .refresh = 60000, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 122, + .hblank_start = 842, .htotal = 856, + + .progressive = true,.trilevel_sync = false, + + .vsync_start_f1 = 12, .vsync_start_f2 = 12, + .vsync_len = 12, + + .veq_ena = false, + + .vi_end_f1 = 44, .vi_end_f2 = 44, + .nbr_end = 496, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "576p", + .clock = 107520, + .refresh = 50000, + .oversample = TV_OVERSAMPLE_4X, + .component_only = 1, + + .hsync_end = 64, .hblank_end = 139, + .hblank_start = 859, .htotal = 863, + + .progressive = true, .trilevel_sync = false, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = false, + + .vi_end_f1 = 48, .vi_end_f2 = 48, + .nbr_end = 575, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "720p@60Hz", + .clock = 148800, + .refresh = 60000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1649, + + .progressive = true, .trilevel_sync = true, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = false, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "720p@59.94Hz", + .clock = 148800, + .refresh = 59940, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1651, + + .progressive = true, .trilevel_sync = true, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = false, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "720p@50Hz", + .clock = 148800, + .refresh = 50000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 80, .hblank_end = 300, + .hblank_start = 1580, .htotal = 1979, + + .progressive = true, .trilevel_sync = true, + + .vsync_start_f1 = 10, .vsync_start_f2 = 10, + .vsync_len = 10, + + .veq_ena = false, + + .vi_end_f1 = 29, .vi_end_f2 = 29, + .nbr_end = 719, + + .burst_ena = false, + + .filter_table = filter_table, + .max_srcw = 800 + }, + { + .name = "1080i@50Hz", + .clock = 148800, + .refresh = 25000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2639, + + .progressive = false, .trilevel_sync = true, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = true, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "1080i@60Hz", + .clock = 148800, + .refresh = 30000, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2199, + + .progressive = false, .trilevel_sync = true, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = true, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = false, + + .filter_table = filter_table, + }, + { + .name = "1080i@59.94Hz", + .clock = 148800, + .refresh = 29970, + .oversample = TV_OVERSAMPLE_2X, + .component_only = 1, + + .hsync_end = 88, .hblank_end = 235, + .hblank_start = 2155, .htotal = 2200, + + .progressive = false, .trilevel_sync = true, + + .vsync_start_f1 = 4, .vsync_start_f2 = 5, + .vsync_len = 10, + + .veq_ena = true, .veq_start_f1 = 4, + .veq_start_f2 = 4, .veq_len = 10, + + + .vi_end_f1 = 21, .vi_end_f2 = 22, + .nbr_end = 539, + + .burst_ena = false, + + .filter_table = filter_table, + }, +}; + +#define NUM_TV_MODES sizeof(tv_modes) / sizeof (tv_modes[0]) + +static void +intel_tv_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + switch(mode) { + case DRM_MODE_DPMS_ON: + I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE); + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE); + break; + } +} + +static void +intel_tv_save(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + int i; + + tv_priv->save_TV_H_CTL_1 = I915_READ(TV_H_CTL_1); + tv_priv->save_TV_H_CTL_2 = I915_READ(TV_H_CTL_2); + tv_priv->save_TV_H_CTL_3 = I915_READ(TV_H_CTL_3); + tv_priv->save_TV_V_CTL_1 = I915_READ(TV_V_CTL_1); + tv_priv->save_TV_V_CTL_2 = I915_READ(TV_V_CTL_2); + tv_priv->save_TV_V_CTL_3 = I915_READ(TV_V_CTL_3); + tv_priv->save_TV_V_CTL_4 = I915_READ(TV_V_CTL_4); + tv_priv->save_TV_V_CTL_5 = I915_READ(TV_V_CTL_5); + tv_priv->save_TV_V_CTL_6 = I915_READ(TV_V_CTL_6); + tv_priv->save_TV_V_CTL_7 = I915_READ(TV_V_CTL_7); + tv_priv->save_TV_SC_CTL_1 = I915_READ(TV_SC_CTL_1); + tv_priv->save_TV_SC_CTL_2 = I915_READ(TV_SC_CTL_2); + tv_priv->save_TV_SC_CTL_3 = I915_READ(TV_SC_CTL_3); + + tv_priv->save_TV_CSC_Y = I915_READ(TV_CSC_Y); + tv_priv->save_TV_CSC_Y2 = I915_READ(TV_CSC_Y2); + tv_priv->save_TV_CSC_U = I915_READ(TV_CSC_U); + tv_priv->save_TV_CSC_U2 = I915_READ(TV_CSC_U2); + tv_priv->save_TV_CSC_V = I915_READ(TV_CSC_V); + tv_priv->save_TV_CSC_V2 = I915_READ(TV_CSC_V2); + tv_priv->save_TV_CLR_KNOBS = I915_READ(TV_CLR_KNOBS); + tv_priv->save_TV_CLR_LEVEL = I915_READ(TV_CLR_LEVEL); + tv_priv->save_TV_WIN_POS = I915_READ(TV_WIN_POS); + tv_priv->save_TV_WIN_SIZE = I915_READ(TV_WIN_SIZE); + tv_priv->save_TV_FILTER_CTL_1 = I915_READ(TV_FILTER_CTL_1); + tv_priv->save_TV_FILTER_CTL_2 = I915_READ(TV_FILTER_CTL_2); + tv_priv->save_TV_FILTER_CTL_3 = I915_READ(TV_FILTER_CTL_3); + + for (i = 0; i < 60; i++) + tv_priv->save_TV_H_LUMA[i] = I915_READ(TV_H_LUMA_0 + (i <<2)); + for (i = 0; i < 60; i++) + tv_priv->save_TV_H_CHROMA[i] = I915_READ(TV_H_CHROMA_0 + (i <<2)); + for (i = 0; i < 43; i++) + tv_priv->save_TV_V_LUMA[i] = I915_READ(TV_V_LUMA_0 + (i <<2)); + for (i = 0; i < 43; i++) + tv_priv->save_TV_V_CHROMA[i] = I915_READ(TV_V_CHROMA_0 + (i <<2)); + + tv_priv->save_TV_DAC = I915_READ(TV_DAC); + tv_priv->save_TV_CTL = I915_READ(TV_CTL); +} + +static void +intel_tv_restore(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + struct drm_crtc *crtc = connector->encoder->crtc; + struct intel_crtc *intel_crtc; + int i; + + /* FIXME: No CRTC? */ + if (!crtc) + return; + + intel_crtc = to_intel_crtc(crtc); + I915_WRITE(TV_H_CTL_1, tv_priv->save_TV_H_CTL_1); + I915_WRITE(TV_H_CTL_2, tv_priv->save_TV_H_CTL_2); + I915_WRITE(TV_H_CTL_3, tv_priv->save_TV_H_CTL_3); + I915_WRITE(TV_V_CTL_1, tv_priv->save_TV_V_CTL_1); + I915_WRITE(TV_V_CTL_2, tv_priv->save_TV_V_CTL_2); + I915_WRITE(TV_V_CTL_3, tv_priv->save_TV_V_CTL_3); + I915_WRITE(TV_V_CTL_4, tv_priv->save_TV_V_CTL_4); + I915_WRITE(TV_V_CTL_5, tv_priv->save_TV_V_CTL_5); + I915_WRITE(TV_V_CTL_6, tv_priv->save_TV_V_CTL_6); + I915_WRITE(TV_V_CTL_7, tv_priv->save_TV_V_CTL_7); + I915_WRITE(TV_SC_CTL_1, tv_priv->save_TV_SC_CTL_1); + I915_WRITE(TV_SC_CTL_2, tv_priv->save_TV_SC_CTL_2); + I915_WRITE(TV_SC_CTL_3, tv_priv->save_TV_SC_CTL_3); + + I915_WRITE(TV_CSC_Y, tv_priv->save_TV_CSC_Y); + I915_WRITE(TV_CSC_Y2, tv_priv->save_TV_CSC_Y2); + I915_WRITE(TV_CSC_U, tv_priv->save_TV_CSC_U); + I915_WRITE(TV_CSC_U2, tv_priv->save_TV_CSC_U2); + I915_WRITE(TV_CSC_V, tv_priv->save_TV_CSC_V); + I915_WRITE(TV_CSC_V2, tv_priv->save_TV_CSC_V2); + I915_WRITE(TV_CLR_KNOBS, tv_priv->save_TV_CLR_KNOBS); + I915_WRITE(TV_CLR_LEVEL, tv_priv->save_TV_CLR_LEVEL); + + { + int pipeconf_reg = (intel_crtc->pipe == 0) ? + PIPEACONF : PIPEBCONF; + int dspcntr_reg = (intel_crtc->plane == 0) ? + DSPACNTR : DSPBCNTR; + int pipeconf = I915_READ(pipeconf_reg); + int dspcntr = I915_READ(dspcntr_reg); + int dspbase_reg = (intel_crtc->plane == 0) ? + DSPAADDR : DSPBADDR; + /* Pipe must be off here */ + I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + + if (!IS_I9XX(dev)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev); + } + + I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE); + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + /* Filter ctl must be set before TV_WIN_SIZE */ + I915_WRITE(TV_FILTER_CTL_1, tv_priv->save_TV_FILTER_CTL_1); + I915_WRITE(TV_FILTER_CTL_2, tv_priv->save_TV_FILTER_CTL_2); + I915_WRITE(TV_FILTER_CTL_3, tv_priv->save_TV_FILTER_CTL_3); + I915_WRITE(TV_WIN_POS, tv_priv->save_TV_WIN_POS); + I915_WRITE(TV_WIN_SIZE, tv_priv->save_TV_WIN_SIZE); + I915_WRITE(pipeconf_reg, pipeconf); + I915_WRITE(dspcntr_reg, dspcntr); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_LUMA_0 + (i <<2), tv_priv->save_TV_H_LUMA[i]); + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_CHROMA_0 + (i <<2), tv_priv->save_TV_H_CHROMA[i]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_LUMA_0 + (i <<2), tv_priv->save_TV_V_LUMA[i]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_CHROMA_0 + (i <<2), tv_priv->save_TV_V_CHROMA[i]); + + I915_WRITE(TV_DAC, tv_priv->save_TV_DAC); + I915_WRITE(TV_CTL, tv_priv->save_TV_CTL); +} + +static const struct tv_mode * +intel_tv_mode_lookup (char *tv_format) +{ + int i; + + for (i = 0; i < sizeof(tv_modes) / sizeof (tv_modes[0]); i++) { + const struct tv_mode *tv_mode = &tv_modes[i]; + + if (!strcmp(tv_format, tv_mode->name)) + return tv_mode; + } + return NULL; +} + +static const struct tv_mode * +intel_tv_mode_find (struct intel_output *intel_output) +{ + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + + return intel_tv_mode_lookup(tv_priv->tv_format); +} + +static enum drm_mode_status +intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) +{ + struct intel_output *intel_output = to_intel_output(connector); + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + + /* Ensure TV refresh is close to desired refresh */ + if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode)) < 1) + return MODE_OK; + return MODE_CLOCK_RANGE; +} + + +static bool +intel_tv_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_mode_config *drm_config = &dev->mode_config; + struct intel_output *intel_output = enc_to_intel_output(encoder); + const struct tv_mode *tv_mode = intel_tv_mode_find (intel_output); + struct drm_encoder *other_encoder; + + if (!tv_mode) + return false; + + /* FIXME: lock encoder list */ + list_for_each_entry(other_encoder, &drm_config->encoder_list, head) { + if (other_encoder != encoder && + other_encoder->crtc == encoder->crtc) + return false; + } + + adjusted_mode->clock = tv_mode->clock; + return true; +} + +static void +intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_output *intel_output = enc_to_intel_output(encoder); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + u32 tv_ctl; + u32 hctl1, hctl2, hctl3; + u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7; + u32 scctl1, scctl2, scctl3; + int i, j; + const struct video_levels *video_levels; + const struct color_conversion *color_conversion; + bool burst_ena; + + if (!tv_mode) + return; /* can't happen (mode_prepare prevents this) */ + + tv_ctl = 0; + + switch (tv_priv->type) { + default: + case DRM_MODE_CONNECTOR_Unknown: + case DRM_MODE_CONNECTOR_Composite: + tv_ctl |= TV_ENC_OUTPUT_COMPOSITE; + video_levels = tv_mode->composite_levels; + color_conversion = tv_mode->composite_color; + burst_ena = tv_mode->burst_ena; + break; + case DRM_MODE_CONNECTOR_Component: + tv_ctl |= TV_ENC_OUTPUT_COMPONENT; + video_levels = &component_levels; + if (tv_mode->burst_ena) + color_conversion = &sdtv_csc_yprpb; + else + color_conversion = &hdtv_csc_yprpb; + burst_ena = false; + break; + case DRM_MODE_CONNECTOR_SVIDEO: + tv_ctl |= TV_ENC_OUTPUT_SVIDEO; + video_levels = tv_mode->svideo_levels; + color_conversion = tv_mode->svideo_color; + burst_ena = tv_mode->burst_ena; + break; + } + hctl1 = (tv_mode->hsync_end << TV_HSYNC_END_SHIFT) | + (tv_mode->htotal << TV_HTOTAL_SHIFT); + + hctl2 = (tv_mode->hburst_start << 16) | + (tv_mode->hburst_len << TV_HBURST_LEN_SHIFT); + + if (burst_ena) + hctl2 |= TV_BURST_ENA; + + hctl3 = (tv_mode->hblank_start << TV_HBLANK_START_SHIFT) | + (tv_mode->hblank_end << TV_HBLANK_END_SHIFT); + + vctl1 = (tv_mode->nbr_end << TV_NBR_END_SHIFT) | + (tv_mode->vi_end_f1 << TV_VI_END_F1_SHIFT) | + (tv_mode->vi_end_f2 << TV_VI_END_F2_SHIFT); + + vctl2 = (tv_mode->vsync_len << TV_VSYNC_LEN_SHIFT) | + (tv_mode->vsync_start_f1 << TV_VSYNC_START_F1_SHIFT) | + (tv_mode->vsync_start_f2 << TV_VSYNC_START_F2_SHIFT); + + vctl3 = (tv_mode->veq_len << TV_VEQ_LEN_SHIFT) | + (tv_mode->veq_start_f1 << TV_VEQ_START_F1_SHIFT) | + (tv_mode->veq_start_f2 << TV_VEQ_START_F2_SHIFT); + + if (tv_mode->veq_ena) + vctl3 |= TV_EQUAL_ENA; + + vctl4 = (tv_mode->vburst_start_f1 << TV_VBURST_START_F1_SHIFT) | + (tv_mode->vburst_end_f1 << TV_VBURST_END_F1_SHIFT); + + vctl5 = (tv_mode->vburst_start_f2 << TV_VBURST_START_F2_SHIFT) | + (tv_mode->vburst_end_f2 << TV_VBURST_END_F2_SHIFT); + + vctl6 = (tv_mode->vburst_start_f3 << TV_VBURST_START_F3_SHIFT) | + (tv_mode->vburst_end_f3 << TV_VBURST_END_F3_SHIFT); + + vctl7 = (tv_mode->vburst_start_f4 << TV_VBURST_START_F4_SHIFT) | + (tv_mode->vburst_end_f4 << TV_VBURST_END_F4_SHIFT); + + if (intel_crtc->pipe == 1) + tv_ctl |= TV_ENC_PIPEB_SELECT; + tv_ctl |= tv_mode->oversample; + + if (tv_mode->progressive) + tv_ctl |= TV_PROGRESSIVE; + if (tv_mode->trilevel_sync) + tv_ctl |= TV_TRILEVEL_SYNC; + if (tv_mode->pal_burst) + tv_ctl |= TV_PAL_BURST; + scctl1 = 0; + /* dda1 implies valid video levels */ + if (tv_mode->dda1_inc) { + scctl1 |= TV_SC_DDA1_EN; + scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT; + } + + if (tv_mode->dda2_inc) + scctl1 |= TV_SC_DDA2_EN; + + if (tv_mode->dda3_inc) + scctl1 |= TV_SC_DDA3_EN; + + scctl1 |= tv_mode->sc_reset; + scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT; + + scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT | + tv_mode->dda2_inc << TV_SCDDA2_INC_SHIFT; + + scctl3 = tv_mode->dda3_size << TV_SCDDA3_SIZE_SHIFT | + tv_mode->dda3_inc << TV_SCDDA3_INC_SHIFT; + + /* Enable two fixes for the chips that need them. */ + if (dev->pci_device < 0x2772) + tv_ctl |= TV_ENC_C0_FIX | TV_ENC_SDP_FIX; + + I915_WRITE(TV_H_CTL_1, hctl1); + I915_WRITE(TV_H_CTL_2, hctl2); + I915_WRITE(TV_H_CTL_3, hctl3); + I915_WRITE(TV_V_CTL_1, vctl1); + I915_WRITE(TV_V_CTL_2, vctl2); + I915_WRITE(TV_V_CTL_3, vctl3); + I915_WRITE(TV_V_CTL_4, vctl4); + I915_WRITE(TV_V_CTL_5, vctl5); + I915_WRITE(TV_V_CTL_6, vctl6); + I915_WRITE(TV_V_CTL_7, vctl7); + I915_WRITE(TV_SC_CTL_1, scctl1); + I915_WRITE(TV_SC_CTL_2, scctl2); + I915_WRITE(TV_SC_CTL_3, scctl3); + + if (color_conversion) { + I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) | + color_conversion->gy); + I915_WRITE(TV_CSC_Y2,(color_conversion->by << 16) | + color_conversion->ay); + I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) | + color_conversion->gu); + I915_WRITE(TV_CSC_U2, (color_conversion->bu << 16) | + color_conversion->au); + I915_WRITE(TV_CSC_V, (color_conversion->rv << 16) | + color_conversion->gv); + I915_WRITE(TV_CSC_V2, (color_conversion->bv << 16) | + color_conversion->av); + } + + I915_WRITE(TV_CLR_KNOBS, 0x00606000); + if (video_levels) + I915_WRITE(TV_CLR_LEVEL, + ((video_levels->black << TV_BLACK_LEVEL_SHIFT) | + (video_levels->blank << TV_BLANK_LEVEL_SHIFT))); + { + int pipeconf_reg = (intel_crtc->pipe == 0) ? + PIPEACONF : PIPEBCONF; + int dspcntr_reg = (intel_crtc->plane == 0) ? + DSPACNTR : DSPBCNTR; + int pipeconf = I915_READ(pipeconf_reg); + int dspcntr = I915_READ(dspcntr_reg); + int dspbase_reg = (intel_crtc->plane == 0) ? + DSPAADDR : DSPBADDR; + int xpos = 0x0, ypos = 0x0; + unsigned int xsize, ysize; + /* Pipe must be off here */ + I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + + /* Wait for vblank for the disable to take effect */ + if (!IS_I9XX(dev)) + intel_wait_for_vblank(dev); + + I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE); + /* Wait for vblank for the disable to take effect. */ + intel_wait_for_vblank(dev); + + /* Filter ctl must be set before TV_WIN_SIZE */ + I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE); + xsize = tv_mode->hblank_start - tv_mode->hblank_end; + if (tv_mode->progressive) + ysize = tv_mode->nbr_end + 1; + else + ysize = 2*tv_mode->nbr_end + 1; + + xpos += tv_priv->margin[TV_MARGIN_LEFT]; + ypos += tv_priv->margin[TV_MARGIN_TOP]; + xsize -= (tv_priv->margin[TV_MARGIN_LEFT] + + tv_priv->margin[TV_MARGIN_RIGHT]); + ysize -= (tv_priv->margin[TV_MARGIN_TOP] + + tv_priv->margin[TV_MARGIN_BOTTOM]); + I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos); + I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize); + + I915_WRITE(pipeconf_reg, pipeconf); + I915_WRITE(dspcntr_reg, dspcntr); + /* Flush the plane changes */ + I915_WRITE(dspbase_reg, I915_READ(dspbase_reg)); + } + + j = 0; + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_LUMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 60; i++) + I915_WRITE(TV_H_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_LUMA_0 + (i<<2), tv_mode->filter_table[j++]); + for (i = 0; i < 43; i++) + I915_WRITE(TV_V_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]); + I915_WRITE(TV_DAC, 0); + I915_WRITE(TV_CTL, tv_ctl); +} + +static const struct drm_display_mode reported_modes[] = { + { + .name = "NTSC 480i", + .clock = 107520, + .hdisplay = 1280, + .hsync_start = 1368, + .hsync_end = 1496, + .htotal = 1712, + + .vdisplay = 1024, + .vsync_start = 1027, + .vsync_end = 1034, + .vtotal = 1104, + .type = DRM_MODE_TYPE_DRIVER, + }, +}; + +/** + * Detects TV presence by checking for load. + * + * Requires that the current pipe's DPLL is active. + + * \return true if TV is connected. + * \return false if TV is disconnected. + */ +static int +intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long irqflags; + u32 tv_ctl, save_tv_ctl; + u32 tv_dac, save_tv_dac; + int type = DRM_MODE_CONNECTOR_Unknown; + + tv_dac = I915_READ(TV_DAC); + + /* Disable TV interrupts around load detect or we'll recurse */ + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_disable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE | + PIPE_HOTPLUG_TV_INTERRUPT_ENABLE); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + + /* + * Detect TV by polling) + */ + if (intel_output->load_detect_temp) { + /* TV not currently running, prod it with destructive detect */ + save_tv_dac = tv_dac; + tv_ctl = I915_READ(TV_CTL); + save_tv_ctl = tv_ctl; + tv_ctl &= ~TV_ENC_ENABLE; + tv_ctl &= ~TV_TEST_MODE_MASK; + tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + tv_dac &= ~TVDAC_SENSE_MASK; + tv_dac |= (TVDAC_STATE_CHG_EN | + TVDAC_A_SENSE_CTL | + TVDAC_B_SENSE_CTL | + TVDAC_C_SENSE_CTL | + DAC_CTL_OVERRIDE | + DAC_A_0_7_V | + DAC_B_0_7_V | + DAC_C_0_7_V); + I915_WRITE(TV_CTL, tv_ctl); + I915_WRITE(TV_DAC, tv_dac); + intel_wait_for_vblank(dev); + tv_dac = I915_READ(TV_DAC); + I915_WRITE(TV_DAC, save_tv_dac); + I915_WRITE(TV_CTL, save_tv_ctl); + } + /* + * A B C + * 0 1 1 Composite + * 1 0 X svideo + * 0 0 0 Component + */ + if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) { + DRM_DEBUG("Detected Composite TV connection\n"); + type = DRM_MODE_CONNECTOR_Composite; + } else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) { + DRM_DEBUG("Detected S-Video TV connection\n"); + type = DRM_MODE_CONNECTOR_SVIDEO; + } else if ((tv_dac & TVDAC_SENSE_MASK) == 0) { + DRM_DEBUG("Detected Component TV connection\n"); + type = DRM_MODE_CONNECTOR_Component; + } else { + DRM_DEBUG("No TV connection detected\n"); + type = -1; + } + + /* Restore interrupt config */ + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_enable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE | + PIPE_HOTPLUG_TV_INTERRUPT_ENABLE); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + + return type; +} + +/** + * Detect the TV connection. + * + * Currently this always returns CONNECTOR_STATUS_UNKNOWN, as we need to be sure + * we have a pipe programmed in order to probe the TV. + */ +static enum drm_connector_status +intel_tv_detect(struct drm_connector *connector) +{ + struct drm_crtc *crtc; + struct drm_display_mode mode; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + struct drm_encoder *encoder = &intel_output->enc; + int dpms_mode; + int type = tv_priv->type; + + mode = reported_modes[0]; + drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V); + + if (encoder->crtc) { + type = intel_tv_detect_type(encoder->crtc, intel_output); + } else { + crtc = intel_get_load_detect_pipe(intel_output, &mode, &dpms_mode); + if (crtc) { + type = intel_tv_detect_type(crtc, intel_output); + intel_release_load_detect_pipe(intel_output, dpms_mode); + } else + type = -1; + } + + if (type < 0) + return connector_status_disconnected; + + return connector_status_connected; +} + +static struct input_res { + char *name; + int w, h; +} input_res_table[] = +{ + {"640x480", 640, 480}, + {"800x600", 800, 600}, + {"1024x768", 1024, 768}, + {"1280x1024", 1280, 1024}, + {"848x480", 848, 480}, + {"1280x720", 1280, 720}, + {"1920x1080", 1920, 1080}, +}; + +/** + * Stub get_modes function. + * + * This should probably return a set of fixed modes, unless we can figure out + * how to probe modes off of TV connections. + */ + +static int +intel_tv_get_modes(struct drm_connector *connector) +{ + struct drm_display_mode *mode_ptr; + struct intel_output *intel_output = to_intel_output(connector); + const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output); + int j; + + for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]); + j++) { + struct input_res *input = &input_res_table[j]; + unsigned int hactive_s = input->w; + unsigned int vactive_s = input->h; + + if (tv_mode->max_srcw && input->w > tv_mode->max_srcw) + continue; + + if (input->w > 1024 && (!tv_mode->progressive + && !tv_mode->component_only)) + continue; + + mode_ptr = drm_calloc(1, sizeof(struct drm_display_mode), + DRM_MEM_DRIVER); + strncpy(mode_ptr->name, input->name, DRM_DISPLAY_MODE_LEN); + + mode_ptr->hdisplay = hactive_s; + mode_ptr->hsync_start = hactive_s + 1; + mode_ptr->hsync_end = hactive_s + 64; + if (mode_ptr->hsync_end <= mode_ptr->hsync_start) + mode_ptr->hsync_end = mode_ptr->hsync_start + 1; + mode_ptr->htotal = hactive_s + 96; + + mode_ptr->vdisplay = vactive_s; + mode_ptr->vsync_start = vactive_s + 1; + mode_ptr->vsync_end = vactive_s + 32; + if (mode_ptr->vsync_end <= mode_ptr->vsync_start) + mode_ptr->vsync_end = mode_ptr->vsync_start + 1; + mode_ptr->vtotal = vactive_s + 33; + + mode_ptr->clock = (int) (tv_mode->refresh * + mode_ptr->vtotal * + mode_ptr->htotal / 1000) / 1000; + + mode_ptr->type = DRM_MODE_TYPE_DRIVER; + drm_mode_probed_add(connector, mode_ptr); + } + + return 0; +} + +static void +intel_tv_destroy (struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + drm_free(intel_output, sizeof(struct intel_output) + sizeof(struct intel_tv_priv), + DRM_MEM_DRIVER); +} + + +static int +intel_tv_set_property(struct drm_connector *connector, struct drm_property *property, + uint64_t val) +{ + struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct intel_tv_priv *tv_priv = intel_output->dev_priv; + int ret = 0; + + ret = drm_connector_property_set_value(connector, property, val); + if (ret < 0) + goto out; + + if (property == dev->mode_config.tv_left_margin_property) + tv_priv->margin[TV_MARGIN_LEFT] = val; + else if (property == dev->mode_config.tv_right_margin_property) + tv_priv->margin[TV_MARGIN_RIGHT] = val; + else if (property == dev->mode_config.tv_top_margin_property) + tv_priv->margin[TV_MARGIN_TOP] = val; + else if (property == dev->mode_config.tv_bottom_margin_property) + tv_priv->margin[TV_MARGIN_BOTTOM] = val; + else if (property == dev->mode_config.tv_mode_property) { + if (val >= NUM_TV_MODES) { + ret = -EINVAL; + goto out; + } + tv_priv->tv_format = tv_modes[val].name; + intel_tv_mode_set(&intel_output->enc, NULL, NULL); + } else { + ret = -EINVAL; + goto out; + } + + intel_tv_mode_set(&intel_output->enc, NULL, NULL); +out: + return ret; +} + +static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = { + .dpms = intel_tv_dpms, + .mode_fixup = intel_tv_mode_fixup, + .prepare = intel_encoder_prepare, + .mode_set = intel_tv_mode_set, + .commit = intel_encoder_commit, +}; + +static const struct drm_connector_funcs intel_tv_connector_funcs = { + .save = intel_tv_save, + .restore = intel_tv_restore, + .detect = intel_tv_detect, + .destroy = intel_tv_destroy, + .set_property = intel_tv_set_property, + .fill_modes = drm_helper_probe_single_connector_modes, +}; + +static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = { + .mode_valid = intel_tv_mode_valid, + .get_modes = intel_tv_get_modes, + .best_encoder = intel_best_encoder, +}; + +void intel_tv_enc_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_funcs intel_tv_enc_funcs = { + .destroy = intel_tv_enc_destroy, +}; + + +void +intel_tv_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_connector *connector; + struct intel_output *intel_output; + struct intel_tv_priv *tv_priv; + u32 tv_dac_on, tv_dac_off, save_tv_dac; + char **tv_format_names; + int i, initial_mode = 0; + + if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED) + return; + + /* Even if we have an encoder we may not have a connector */ + if (!dev_priv->int_tv_support) + return; + + /* + * Sanity check the TV output by checking to see if the + * DAC register holds a value + */ + save_tv_dac = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac | TVDAC_STATE_CHG_EN); + tv_dac_on = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN); + tv_dac_off = I915_READ(TV_DAC); + + I915_WRITE(TV_DAC, save_tv_dac); + + /* + * If the register does not hold the state change enable + * bit, (either as a 0 or a 1), assume it doesn't really + * exist + */ + if ((tv_dac_on & TVDAC_STATE_CHG_EN) == 0 || + (tv_dac_off & TVDAC_STATE_CHG_EN) != 0) + return; + + intel_output = drm_calloc(1, sizeof(struct intel_output) + + sizeof(struct intel_tv_priv), DRM_MEM_DRIVER); + if (!intel_output) { + return; + } + connector = &intel_output->base; + + drm_connector_init(dev, connector, &intel_tv_connector_funcs, + DRM_MODE_CONNECTOR_SVIDEO); + + drm_encoder_init(dev, &intel_output->enc, &intel_tv_enc_funcs, + DRM_MODE_ENCODER_TVDAC); + + drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); + tv_priv = (struct intel_tv_priv *)(intel_output + 1); + intel_output->type = INTEL_OUTPUT_TVOUT; + intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1)); + intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT); + intel_output->dev_priv = tv_priv; + tv_priv->type = DRM_MODE_CONNECTOR_Unknown; + + /* BIOS margin values */ + tv_priv->margin[TV_MARGIN_LEFT] = 54; + tv_priv->margin[TV_MARGIN_TOP] = 36; + tv_priv->margin[TV_MARGIN_RIGHT] = 46; + tv_priv->margin[TV_MARGIN_BOTTOM] = 37; + + tv_priv->tv_format = kstrdup(tv_modes[initial_mode].name, GFP_KERNEL); + + drm_encoder_helper_add(&intel_output->enc, &intel_tv_helper_funcs); + drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs); + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + /* Create TV properties then attach current values */ + tv_format_names = drm_alloc(sizeof(char *) * NUM_TV_MODES, + DRM_MEM_DRIVER); + if (!tv_format_names) + goto out; + for (i = 0; i < NUM_TV_MODES; i++) + tv_format_names[i] = tv_modes[i].name; + drm_mode_create_tv_properties(dev, NUM_TV_MODES, tv_format_names); + + drm_connector_attach_property(connector, dev->mode_config.tv_mode_property, + initial_mode); + drm_connector_attach_property(connector, + dev->mode_config.tv_left_margin_property, + tv_priv->margin[TV_MARGIN_LEFT]); + drm_connector_attach_property(connector, + dev->mode_config.tv_top_margin_property, + tv_priv->margin[TV_MARGIN_TOP]); + drm_connector_attach_property(connector, + dev->mode_config.tv_right_margin_property, + tv_priv->margin[TV_MARGIN_RIGHT]); + drm_connector_attach_property(connector, + dev->mode_config.tv_bottom_margin_property, + tv_priv->margin[TV_MARGIN_BOTTOM]); +out: + drm_sysfs_connector_add(connector); +} diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 3f663ecc3dbb..0e506f438f48 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -198,7 +198,7 @@ typedef struct _drm_i915_sarea { /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. */ -typedef struct _drm_i915_batchbuffer { +typedef struct drm_i915_batchbuffer { int start; /* agp offset */ int used; /* nr bytes in use */ int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ |