diff options
-rw-r--r-- | include/media/v4l2-common.h | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h new file mode 100644 index 000000000000..d3fd48157eb8 --- /dev/null +++ b/include/media/v4l2-common.h @@ -0,0 +1,110 @@ +/* + v4l2 common internal API header + + This header contains internal shared ioctl definitions for use by the + internal low-level v4l2 drivers. + Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal + define, + + Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef V4L2_COMMON_H_ +#define V4L2_COMMON_H_ + +/* VIDIOC_INT_AUDIO_CLOCK_FREQ */ +enum v4l2_audio_clock_freq { + V4L2_AUDCLK_32_KHZ = 32000, + V4L2_AUDCLK_441_KHZ = 44100, + V4L2_AUDCLK_48_KHZ = 48000, +}; + +/* VIDIOC_INT_G_REGISTER and VIDIOC_INT_S_REGISTER */ +struct v4l2_register { + u32 i2c_id; /* I2C driver ID of the I2C chip. 0 for the I2C adapter. */ + unsigned long reg; + u32 val; +}; + +/* VIDIOC_INT_DECODE_VBI_LINE */ +struct v4l2_decode_vbi_line { + u32 is_second_field; /* Set to 0 for the first (odd) field, + set to 1 for the second (even) field. */ + u8 *p; /* Pointer to the sliced VBI data from the decoder. + On exit points to the start of the payload. */ + u32 line; /* Line number of the sliced VBI data (1-23) */ + u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ +}; + +/* VIDIOC_INT_G_CHIP_IDENT: identifies the actual chip installed on the board */ +enum v4l2_chip_ident { + /* general idents: reserved range 0-49 */ + V4L2_IDENT_UNKNOWN = 0, + + /* module saa7115: reserved range 100-149 */ + V4L2_IDENT_SAA7114 = 104, + V4L2_IDENT_SAA7115 = 105, + + /* module saa7127: reserved range 150-199 */ + V4L2_IDENT_SAA7127 = 157, + V4L2_IDENT_SAA7129 = 159, + + /* module cx25840: reserved range 200-249 */ + V4L2_IDENT_CX25840 = 240, + V4L2_IDENT_CX25841 = 241, + V4L2_IDENT_CX25842 = 242, + V4L2_IDENT_CX25843 = 243, +}; + +/* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */ +#define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register) +#define VIDIOC_INT_G_REGISTER _IOWR('d', 101, struct v4l2_register) + +/* Reset the I2C chip */ +#define VIDIOC_INT_RESET _IO ('d', 102) + +/* Set the frequency of the audio clock output. + Used to slave an audio processor to the video decoder, ensuring that audio + and video remain synchronized. */ +#define VIDIOC_INT_AUDIO_CLOCK_FREQ _IOR ('d', 103, enum v4l2_audio_clock_freq) + +/* Video decoders that support sliced VBI need to implement this ioctl. + Field p of the v4l2_sliced_vbi_line struct is set to the start of the VBI + data that was generated by the decoder. The driver then parses the sliced + VBI data and sets the other fields in the struct accordingly. The pointer p + is updated to point to the start of the payload which can be copied + verbatim into the data field of the v4l2_sliced_vbi_data struct. If no + valid VBI data was found, then the type field is set to 0 on return. */ +#define VIDIOC_INT_DECODE_VBI_LINE _IOWR('d', 104, struct v4l2_decode_vbi_line) + +/* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is + filled with the data packets that should be output. Note that if you set + the line field to 0, then that VBI signal is disabled. */ +#define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data) + +/* Used to obtain the sliced VBI packet from a readback register. Not all + video decoders support this. If no data is available because the readback + register contains invalid or erroneous data -EIO is returned. Note that + you must fill in the 'id' member and the 'field' member (to determine + whether CC data from the first or second field should be obtained). */ +#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data *) + +/* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can + be made. */ +#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *) + +#endif /* V4L2_COMMON_H_ */ |