diff options
| -rw-r--r-- | Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/i387.h | 284 | ||||
| -rw-r--r-- | arch/x86/include/asm/processor.h | 1 | ||||
| -rw-r--r-- | arch/x86/include/asm/thread_info.h | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/process_32.c | 20 | ||||
| -rw-r--r-- | arch/x86/kernel/process_64.c | 29 | ||||
| -rw-r--r-- | arch/x86/kernel/traps.c | 41 | ||||
| -rw-r--r-- | arch/x86/kernel/xsave.c | 12 | ||||
| -rw-r--r-- | arch/x86/kvm/vmx.c | 2 |
9 files changed, 269 insertions, 124 deletions
@@ -1,6 +1,6 @@ VERSION = 3 PATCHLEVEL = 2 -SUBLEVEL = 7 +SUBLEVEL = 8 EXTRAVERSION = NAME = Saber-toothed Squirrel diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index c9e09ea05644..a850b4d8d14d 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -29,8 +29,8 @@ extern unsigned int sig_xstate_size; extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); -extern asmlinkage void math_state_restore(void); -extern void __math_state_restore(void); +extern void __math_state_restore(struct task_struct *); +extern void math_state_restore(void); extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); extern user_regset_active_fn fpregs_active, xfpregs_active; @@ -212,19 +212,11 @@ static inline void fpu_fxsave(struct fpu *fpu) #endif /* CONFIG_X86_64 */ -/* We need a safe address that is cheap to find and that is already - in L1 during context switch. The best choices are unfortunately - different for UP and SMP */ -#ifdef CONFIG_SMP -#define safe_address (__per_cpu_offset[0]) -#else -#define safe_address (kstat_cpu(0).cpustat.user) -#endif - /* - * These must be called with preempt disabled + * These must be called with preempt disabled. Returns + * 'true' if the FPU state is still intact. */ -static inline void fpu_save_init(struct fpu *fpu) +static inline int fpu_save_init(struct fpu *fpu) { if (use_xsave()) { fpu_xsave(fpu); @@ -233,33 +225,33 @@ static inline void fpu_save_init(struct fpu *fpu) * xsave header may indicate the init state of the FP. */ if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP)) - return; + return 1; } else if (use_fxsr()) { fpu_fxsave(fpu); } else { asm volatile("fnsave %[fx]; fwait" : [fx] "=m" (fpu->state->fsave)); - return; + return 0; } - if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) + /* + * If exceptions are pending, we need to clear them so + * that we don't randomly get exceptions later. + * + * FIXME! Is this perhaps only true for the old-style + * irq13 case? Maybe we could leave the x87 state + * intact otherwise? + */ + if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) { asm volatile("fnclex"); - - /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception - is pending. Clear the x87 state here by setting it to fixed - values. safe_address is a random variable that should be in L1 */ - alternative_input( - ASM_NOP8 ASM_NOP2, - "emms\n\t" /* clear stack tags */ - "fildl %P[addr]", /* set F?P to defined value */ - X86_FEATURE_FXSAVE_LEAK, - [addr] "m" (safe_address)); + return 0; + } + return 1; } -static inline void __save_init_fpu(struct task_struct *tsk) +static inline int __save_init_fpu(struct task_struct *tsk) { - fpu_save_init(&tsk->thread.fpu); - task_thread_info(tsk)->status &= ~TS_USEDFPU; + return fpu_save_init(&tsk->thread.fpu); } static inline int fpu_fxrstor_checking(struct fpu *fpu) @@ -281,39 +273,185 @@ static inline int restore_fpu_checking(struct task_struct *tsk) } /* - * Signal frame handlers... + * Software FPU state helpers. Careful: these need to + * be preemption protection *and* they need to be + * properly paired with the CR0.TS changes! */ -extern int save_i387_xstate(void __user *buf); -extern int restore_i387_xstate(void __user *buf); +static inline int __thread_has_fpu(struct task_struct *tsk) +{ + return tsk->thread.has_fpu; +} -static inline void __unlazy_fpu(struct task_struct *tsk) +/* Must be paired with an 'stts' after! */ +static inline void __thread_clear_has_fpu(struct task_struct *tsk) { - if (task_thread_info(tsk)->status & TS_USEDFPU) { - __save_init_fpu(tsk); - stts(); - } else - tsk->fpu_counter = 0; + tsk->thread.has_fpu = 0; +} + +/* Must be paired with a 'clts' before! */ +static inline void __thread_set_has_fpu(struct task_struct *tsk) +{ + tsk->thread.has_fpu = 1; } +/* + * Encapsulate the CR0.TS handling together with the + * software flag. + * + * These generally need preemption protection to work, + * do try to avoid using these on their own. + */ +static inline void __thread_fpu_end(struct task_struct *tsk) +{ + __thread_clear_has_fpu(tsk); + stts(); +} + +static inline void __thread_fpu_begin(struct task_struct *tsk) +{ + clts(); + __thread_set_has_fpu(tsk); +} + +/* + * FPU state switching for scheduling. + * + * This is a two-stage process: + * + * - switch_fpu_prepare() saves the old state and + * sets the new state of the CR0.TS bit. This is + * done within the context of the old process. + * + * - switch_fpu_finish() restores the new state as + * necessary. + */ +typedef struct { int preload; } fpu_switch_t; + +/* + * FIXME! We could do a totally lazy restore, but we need to + * add a per-cpu "this was the task that last touched the FPU + * on this CPU" variable, and the task needs to have a "I last + * touched the FPU on this CPU" and check them. + * + * We don't do that yet, so "fpu_lazy_restore()" always returns + * false, but some day.. + */ +#define fpu_lazy_restore(tsk) (0) +#define fpu_lazy_state_intact(tsk) do { } while (0) + +static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new) +{ + fpu_switch_t fpu; + + fpu.preload = tsk_used_math(new) && new->fpu_counter > 5; + if (__thread_has_fpu(old)) { + if (__save_init_fpu(old)) + fpu_lazy_state_intact(old); + __thread_clear_has_fpu(old); + old->fpu_counter++; + + /* Don't change CR0.TS if we just switch! */ + if (fpu.preload) { + __thread_set_has_fpu(new); + prefetch(new->thread.fpu.state); + } else + stts(); + } else { + old->fpu_counter = 0; + if (fpu.preload) { + if (fpu_lazy_restore(new)) + fpu.preload = 0; + else + prefetch(new->thread.fpu.state); + __thread_fpu_begin(new); + } + } + return fpu; +} + +/* + * By the time this gets called, we've already cleared CR0.TS and + * given the process the FPU if we are going to preload the FPU + * state - all we need to do is to conditionally restore the register + * state itself. + */ +static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu) +{ + if (fpu.preload) + __math_state_restore(new); +} + +/* + * Signal frame handlers... + */ +extern int save_i387_xstate(void __user *buf); +extern int restore_i387_xstate(void __user *buf); + static inline void __clear_fpu(struct task_struct *tsk) { - if (task_thread_info(tsk)->status & TS_USEDFPU) { + if (__thread_has_fpu(tsk)) { /* Ignore delayed exceptions from user space */ asm volatile("1: fwait\n" "2:\n" _ASM_EXTABLE(1b, 2b)); - task_thread_info(tsk)->status &= ~TS_USEDFPU; - stts(); + __thread_fpu_end(tsk); } } +/* + * Were we in an interrupt that interrupted kernel mode? + * + * We can do a kernel_fpu_begin/end() pair *ONLY* if that + * pair does nothing at all: the thread must not have fpu (so + * that we don't try to save the FPU state), and TS must + * be set (so that the clts/stts pair does nothing that is + * visible in the interrupted kernel thread). + */ +static inline bool interrupted_kernel_fpu_idle(void) +{ + return !__thread_has_fpu(current) && + (read_cr0() & X86_CR0_TS); +} + +/* + * Were we in user mode (or vm86 mode) when we were + * interrupted? + * + * Doing kernel_fpu_begin/end() is ok if we are running + * in an interrupt context from user mode - we'll just + * save the FPU state as required. + */ +static inline bool interrupted_user_mode(void) +{ + struct pt_regs *regs = get_irq_regs(); + return regs && user_mode_vm(regs); +} + +/* + * Can we use the FPU in kernel mode with the + * whole "kernel_fpu_begin/end()" sequence? + * + * It's always ok in process context (ie "not interrupt") + * but it is sometimes ok even from an irq. + */ +static inline bool irq_fpu_usable(void) +{ + return !in_interrupt() || + interrupted_user_mode() || + interrupted_kernel_fpu_idle(); +} + static inline void kernel_fpu_begin(void) { - struct thread_info *me = current_thread_info(); + struct task_struct *me = current; + + WARN_ON_ONCE(!irq_fpu_usable()); preempt_disable(); - if (me->status & TS_USEDFPU) - __save_init_fpu(me->task); - else + if (__thread_has_fpu(me)) { + __save_init_fpu(me); + __thread_clear_has_fpu(me); + /* We do 'stts()' in kernel_fpu_end() */ + } else clts(); } @@ -323,14 +461,6 @@ static inline void kernel_fpu_end(void) preempt_enable(); } -static inline bool irq_fpu_usable(void) -{ - struct pt_regs *regs; - - return !in_interrupt() || !(regs = get_irq_regs()) || \ - user_mode(regs) || (read_cr0() & X86_CR0_TS); -} - /* * Some instructions like VIA's padlock instructions generate a spurious * DNA fault but don't modify SSE registers. And these instructions @@ -363,20 +493,64 @@ static inline void irq_ts_restore(int TS_state) } /* + * The question "does this thread have fpu access?" + * is slightly racy, since preemption could come in + * and revoke it immediately after the test. + * + * However, even in that very unlikely scenario, + * we can just assume we have FPU access - typically + * to save the FP state - we'll just take a #NM + * fault and get the FPU access back. + * + * The actual user_fpu_begin/end() functions + * need to be preemption-safe, though. + * + * NOTE! user_fpu_end() must be used only after you + * have saved the FP state, and user_fpu_begin() must + * be used only immediately before restoring it. + * These functions do not do any save/restore on + * their own. + */ +static inline int user_has_fpu(void) +{ + return __thread_has_fpu(current); +} + +static inline void user_fpu_end(void) +{ + preempt_disable(); + __thread_fpu_end(current); + preempt_enable(); +} + +static inline void user_fpu_begin(void) +{ + preempt_disable(); + if (!user_has_fpu()) + __thread_fpu_begin(current); + preempt_enable(); +} + +/* * These disable preemption on their own and are safe */ static inline void save_init_fpu(struct task_struct *tsk) { + WARN_ON_ONCE(!__thread_has_fpu(tsk)); preempt_disable(); __save_init_fpu(tsk); - stts(); + __thread_fpu_end(tsk); preempt_enable(); } static inline void unlazy_fpu(struct task_struct *tsk) { preempt_disable(); - __unlazy_fpu(tsk); + if (__thread_has_fpu(tsk)) { + __save_init_fpu(tsk); + __thread_fpu_end(tsk); + } else + tsk->fpu_counter = 0; preempt_enable(); } diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index b650435ffb53..bb3ee3629a0f 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -456,6 +456,7 @@ struct thread_struct { unsigned long trap_no; unsigned long error_code; /* floating point and extended processor state */ + unsigned long has_fpu; struct fpu fpu; #ifdef CONFIG_X86_32 /* Virtual 86 mode info */ diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index a1fe5c127b52..d7ef849714a1 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -242,8 +242,6 @@ static inline struct thread_info *current_thread_info(void) * ever touches our thread-synchronous status, so we don't * have to worry about atomic accesses. */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* idle task polling need_resched, skip sending interrupt */ diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 055a0cc50342..631bba6e5788 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -296,22 +296,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) *next = &next_p->thread; int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); - bool preload_fpu; + fpu_switch_t fpu; /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ - /* - * If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; - - __unlazy_fpu(prev_p); - - /* we're going to use this soon, after a few expensive things */ - if (preload_fpu) - prefetch(next->fpu.state); + fpu = switch_fpu_prepare(prev_p, next_p); /* * Reload esp0. @@ -400,15 +389,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) */ arch_end_context_switch(next_p); - if (preload_fpu) - __math_state_restore(); - /* * Restore %gs if needed (which is common) */ if (prev->gs | next->gs) lazy_load_gs(next->gs); + switch_fpu_finish(next_p, fpu); + percpu_write(current_task, next_p); return prev_p; diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 16f3213f74ff..08840ab61a2e 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -379,18 +379,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) int cpu = smp_processor_id(); struct tss_struct *tss = &per_cpu(init_tss, cpu); unsigned fsindex, gsindex; - bool preload_fpu; + fpu_switch_t fpu; - /* - * If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; - - /* we're going to use this soon, after a few expensive things */ - if (preload_fpu) - prefetch(next->fpu.state); + fpu = switch_fpu_prepare(prev_p, next_p); /* * Reload esp0, LDT and the page table pointer: @@ -420,13 +411,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) load_TLS(next, cpu); - /* Must be after DS reload */ - __unlazy_fpu(prev_p); - - /* Make sure cpu is ready for new context */ - if (preload_fpu) - clts(); - /* * Leave lazy mode, flushing any hypercalls made here. * This must be done before restoring TLS segments so @@ -467,6 +451,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) wrmsrl(MSR_KERNEL_GS_BASE, next->gs); prev->gsindex = gsindex; + switch_fpu_finish(next_p, fpu); + /* * Switch the PDA and FPU contexts. */ @@ -485,13 +471,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV)) __switch_to_xtra(prev_p, next_p, tss); - /* - * Preload the FPU context, now that we've determined that the - * task is likely to be using it. - */ - if (preload_fpu) - __math_state_restore(); - return prev_p; } diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 085dee1cb115..cc88aec09888 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -576,25 +576,34 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void) } /* - * __math_state_restore assumes that cr0.TS is already clear and the - * fpu state is all ready for use. Used during context switch. + * This gets called with the process already owning the + * FPU state, and with CR0.TS cleared. It just needs to + * restore the FPU register state. */ -void __math_state_restore(void) +void __math_state_restore(struct task_struct *tsk) { - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = thread->task; + /* We need a safe address that is cheap to find and that is already + in L1. We've just brought in "tsk->thread.has_fpu", so use that */ +#define safe_address (tsk->thread.has_fpu) + + /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception + is pending. Clear the x87 state here by setting it to fixed + values. safe_address is a random variable that should be in L1 */ + alternative_input( + ASM_NOP8 ASM_NOP2, + "emms\n\t" /* clear stack tags */ + "fildl %P[addr]", /* set F?P to defined value */ + X86_FEATURE_FXSAVE_LEAK, + [addr] "m" (safe_address)); /* * Paranoid restore. send a SIGSEGV if we fail to restore the state. */ if (unlikely(restore_fpu_checking(tsk))) { - stts(); + __thread_fpu_end(tsk); force_sig(SIGSEGV, tsk); return; } - - thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ - tsk->fpu_counter++; } /* @@ -604,13 +613,12 @@ void __math_state_restore(void) * Careful.. There are problems with IBM-designed IRQ13 behaviour. * Don't touch unless you *really* know how it works. * - * Must be called with kernel preemption disabled (in this case, - * local interrupts are disabled at the call-site in entry.S). + * Must be called with kernel preemption disabled (eg with local + * local interrupts as in the case of do_device_not_available). */ -asmlinkage void math_state_restore(void) +void math_state_restore(void) { - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = thread->task; + struct task_struct *tsk = current; if (!tsk_used_math(tsk)) { local_irq_enable(); @@ -627,9 +635,10 @@ asmlinkage void math_state_restore(void) local_irq_disable(); } - clts(); /* Allow maths ops (or we recurse) */ + __thread_fpu_begin(tsk); + __math_state_restore(tsk); - __math_state_restore(); + tsk->fpu_counter++; } EXPORT_SYMBOL_GPL(math_state_restore); diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index a3911343976b..711091114119 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_struct *tsk) if (!fx) return; - BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU); + BUG_ON(__thread_has_fpu(tsk)); xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; @@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf) if (!used_math()) return 0; - if (task_thread_info(tsk)->status & TS_USEDFPU) { + if (user_has_fpu()) { if (use_xsave()) err = xsave_user(buf); else @@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf) if (err) return err; - task_thread_info(tsk)->status &= ~TS_USEDFPU; - stts(); + user_fpu_end(); } else { sanitize_i387_state(tsk); if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave, @@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf) return err; } - if (!(task_thread_info(current)->status & TS_USEDFPU)) { - clts(); - task_thread_info(current)->status |= TS_USEDFPU; - } + user_fpu_begin(); if (use_xsave()) err = restore_user_xstate(buf); else diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 579a0b51696a..4ea76784fe65 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1456,7 +1456,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) #ifdef CONFIG_X86_64 wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base); #endif - if (current_thread_info()->status & TS_USEDFPU) + if (__thread_has_fpu(current)) clts(); load_gdt(&__get_cpu_var(host_gdt)); } |