diff options
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 7 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/display.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/nokia-dsi-panel.h | 31 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-taal.c | 567 | ||||
| -rw-r--r-- | drivers/video/omap2/displays/panel-toppoly-tdo35s.c | 8 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/dispc.c | 16 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/display.c | 4 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/dsi.c | 463 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/dss.c | 6 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/dss.h | 11 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/manager.c | 204 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/overlay.c | 2 | ||||
| -rw-r--r-- | drivers/video/omap2/dss/rfbi.c | 2 | ||||
| -rw-r--r-- | drivers/video/omap2/omapfb/omapfb-ioctl.c | 188 | ||||
| -rw-r--r-- | drivers/video/omap2/omapfb/omapfb-main.c | 229 | ||||
| -rw-r--r-- | drivers/video/omap2/omapfb/omapfb-sysfs.c | 70 | ||||
| -rw-r--r-- | drivers/video/omap2/omapfb/omapfb.h | 29 | ||||
| -rw-r--r-- | include/linux/omapfb.h | 5 |
18 files changed, 1265 insertions, 586 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 6494dbdfc391..f76d9c0a47a1 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -514,14 +514,11 @@ static struct regulator_init_data omap3_evm_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supply = { - .supply = "vdvi", - .dev = &omap3_evm_lcd_device.dev, -}; +static struct regulator_consumer_supply omap3_evm_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); static struct regulator_init_data omap3_evm_vpll2 = { .constraints = { - .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 1c529ce9dc11..8bd15bdb4132 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -238,7 +238,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param); int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data); -int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data); +int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2); int dsi_vc_set_max_rx_packet_size(int channel, u16 len); int dsi_vc_send_null(int channel); int dsi_vc_send_bta_sync(int channel); @@ -277,8 +277,8 @@ struct omap_video_timings { * identify the mode, and does not actually use the configs * itself. However, the configs should be something that * a normal monitor can also show */ -const extern struct omap_video_timings omap_dss_pal_timings; -const extern struct omap_video_timings omap_dss_ntsc_timings; +extern const struct omap_video_timings omap_dss_pal_timings; +extern const struct omap_video_timings omap_dss_ntsc_timings; #endif struct omap_overlay_info { @@ -560,7 +560,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable); int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); + u16 *x, u16 *y, u16 *w, u16 *h, + bool enlarge_update_area); int omap_dsi_update(struct omap_dss_device *dssdev, int channel, u16 x, u16 y, u16 w, u16 h, diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h new file mode 100644 index 000000000000..01ab6572ccbb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h @@ -0,0 +1,31 @@ +#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H +#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H + +#include "display.h" + +/** + * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration + * @name: panel name + * @use_ext_te: use external TE + * @ext_te_gpio: external TE GPIO + * @use_esd_check: perform ESD checks + * @max_backlight_level: maximum backlight level + * @set_backlight: pointer to backlight set function + * @get_backlight: pointer to backlight get function + */ +struct nokia_dsi_panel_data { + const char *name; + + int reset_gpio; + + bool use_ext_te; + int ext_te_gpio; + + bool use_esd_check; + + int max_backlight_level; + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */ diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index aaf5d308a046..e1c765d11419 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -28,12 +28,13 @@ #include <linux/fb.h> #include <linux/interrupt.h> #include <linux/gpio.h> -#include <linux/completion.h> #include <linux/workqueue.h> #include <linux/slab.h> +#include <linux/regulator/consumer.h> #include <linux/mutex.h> #include <plat/display.h> +#include <plat/nokia-dsi-panel.h> /* DSI Virtual channel. Hardcoded for now. */ #define TCH 0 @@ -62,11 +63,136 @@ #define DCS_GET_ID2 0xdb #define DCS_GET_ID3 0xdc -/* #define TAAL_USE_ESD_CHECK */ #define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000) +static irqreturn_t taal_te_isr(int irq, void *data); +static void taal_te_timeout_work_callback(struct work_struct *work); static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable); +struct panel_regulator { + struct regulator *regulator; + const char *name; + int min_uV; + int max_uV; +}; + +static void free_regulators(struct panel_regulator *regulators, int n) +{ + int i; + + for (i = 0; i < n; i++) { + /* disable/put in reverse order */ + regulator_disable(regulators[n - i - 1].regulator); + regulator_put(regulators[n - i - 1].regulator); + } +} + +static int init_regulators(struct omap_dss_device *dssdev, + struct panel_regulator *regulators, int n) +{ + int r, i, v; + + for (i = 0; i < n; i++) { + struct regulator *reg; + + reg = regulator_get(&dssdev->dev, regulators[i].name); + if (IS_ERR(reg)) { + dev_err(&dssdev->dev, "failed to get regulator %s\n", + regulators[i].name); + r = PTR_ERR(reg); + goto err; + } + + /* FIXME: better handling of fixed vs. variable regulators */ + v = regulator_get_voltage(reg); + if (v < regulators[i].min_uV || v > regulators[i].max_uV) { + r = regulator_set_voltage(reg, regulators[i].min_uV, + regulators[i].max_uV); + if (r) { + dev_err(&dssdev->dev, + "failed to set regulator %s voltage\n", + regulators[i].name); + regulator_put(reg); + goto err; + } + } + + r = regulator_enable(reg); + if (r) { + dev_err(&dssdev->dev, "failed to enable regulator %s\n", + regulators[i].name); + regulator_put(reg); + goto err; + } + + regulators[i].regulator = reg; + } + + return 0; + +err: + free_regulators(regulators, i); + + return r; +} + +/** + * struct panel_config - panel configuration + * @name: panel name + * @type: panel type + * @timings: panel resolution + * @sleep: various panel specific delays, passed to msleep() if non-zero + * @reset_sequence: reset sequence timings, passed to udelay() if non-zero + * @regulators: array of panel regulators + * @num_regulators: number of regulators in the array + */ +struct panel_config { + const char *name; + int type; + + struct omap_video_timings timings; + + struct { + unsigned int sleep_in; + unsigned int sleep_out; + unsigned int hw_reset; + unsigned int enable_te; + } sleep; + + struct { + unsigned int high; + unsigned int low; + } reset_sequence; + + struct panel_regulator *regulators; + int num_regulators; +}; + +enum { + PANEL_TAAL, +}; + +static struct panel_config panel_configs[] = { + { + .name = "taal", + .type = PANEL_TAAL, + .timings = { + .x_res = 864, + .y_res = 480, + }, + .sleep = { + .sleep_in = 5, + .sleep_out = 5, + .hw_reset = 5, + .enable_te = 100, /* possible panel bug */ + }, + .reset_sequence = { + .high = 10, + .low = 10, + }, + }, +}; + struct taal_data { struct mutex lock; @@ -84,8 +210,15 @@ struct taal_data { bool mirror; bool te_enabled; - bool use_ext_te; - struct completion te_completion; + + atomic_t do_update; + struct { + u16 x; + u16 y; + u16 w; + u16 h; + } update_region; + struct delayed_work te_timeout_work; bool use_dsi_bl; @@ -96,8 +229,16 @@ struct taal_data { struct workqueue_struct *esd_wq; struct delayed_work esd_work; + + struct panel_config *panel_config; }; +static inline struct nokia_dsi_panel_data +*get_panel_data(const struct omap_dss_device *dssdev) +{ + return (struct nokia_dsi_panel_data *) dssdev->data; +} + static void taal_esd_work(struct work_struct *work); static void hw_guard_start(struct taal_data *td, int guard_msec) @@ -159,7 +300,8 @@ static int taal_sleep_in(struct taal_data *td) hw_guard_start(td, 120); - msleep(5); + if (td->panel_config->sleep.sleep_in) + msleep(td->panel_config->sleep.sleep_in); return 0; } @@ -176,7 +318,8 @@ static int taal_sleep_out(struct taal_data *td) hw_guard_start(td, 120); - msleep(5); + if (td->panel_config->sleep.sleep_out) + msleep(td->panel_config->sleep.sleep_out); return 0; } @@ -279,6 +422,7 @@ static int taal_bl_update_status(struct backlight_device *dev) { struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev); struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); int r; int level; @@ -290,24 +434,26 @@ static int taal_bl_update_status(struct backlight_device *dev) dev_dbg(&dssdev->dev, "update brightness to %d\n", level); + mutex_lock(&td->lock); + if (td->use_dsi_bl) { if (td->enabled) { dsi_bus_lock(); r = taal_dcs_write_1(DCS_BRIGHTNESS, level); dsi_bus_unlock(); - if (r) - return r; + } else { + r = 0; } } else { - if (!dssdev->set_backlight) - return -EINVAL; - - r = dssdev->set_backlight(dssdev, level); - if (r) - return r; + if (!panel_data->set_backlight) + r = -EINVAL; + else + r = panel_data->set_backlight(dssdev, level); } - return 0; + mutex_unlock(&td->lock); + + return r; } static int taal_bl_get_intensity(struct backlight_device *dev) @@ -344,16 +490,6 @@ static void taal_get_resolution(struct omap_dss_device *dssdev, } } -static irqreturn_t taal_te_isr(int irq, void *data) -{ - struct omap_dss_device *dssdev = data; - struct taal_data *td = dev_get_drvdata(&dssdev->dev); - - complete_all(&td->te_completion); - - return IRQ_HANDLED; -} - static ssize_t taal_num_errors_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -362,6 +498,8 @@ static ssize_t taal_num_errors_show(struct device *dev, u8 errors; int r; + mutex_lock(&td->lock); + if (td->enabled) { dsi_bus_lock(); r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors); @@ -370,6 +508,8 @@ static ssize_t taal_num_errors_show(struct device *dev, r = -ENODEV; } + mutex_unlock(&td->lock); + if (r) return r; @@ -384,6 +524,8 @@ static ssize_t taal_hw_revision_show(struct device *dev, u8 id1, id2, id3; int r; + mutex_lock(&td->lock); + if (td->enabled) { dsi_bus_lock(); r = taal_get_id(&id1, &id2, &id3); @@ -392,6 +534,8 @@ static ssize_t taal_hw_revision_show(struct device *dev, r = -ENODEV; } + mutex_unlock(&td->lock); + if (r) return r; @@ -441,6 +585,8 @@ static ssize_t store_cabc_mode(struct device *dev, if (i == ARRAY_SIZE(cabc_modes)) return -EINVAL; + mutex_lock(&td->lock); + if (td->enabled) { dsi_bus_lock(); if (!td->cabc_broken) @@ -450,6 +596,8 @@ static ssize_t store_cabc_mode(struct device *dev, td->cabc_mode = i; + mutex_unlock(&td->lock); + return count; } @@ -488,47 +636,93 @@ static struct attribute_group taal_attr_group = { .attrs = taal_attrs, }; +static void taal_hw_reset(struct omap_dss_device *dssdev) +{ + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); + + if (panel_data->reset_gpio == -1) + return; + + gpio_set_value(panel_data->reset_gpio, 1); + if (td->panel_config->reset_sequence.high) + udelay(td->panel_config->reset_sequence.high); + /* reset the panel */ + gpio_set_value(panel_data->reset_gpio, 0); + /* assert reset */ + if (td->panel_config->reset_sequence.low) + udelay(td->panel_config->reset_sequence.low); + gpio_set_value(panel_data->reset_gpio, 1); + /* wait after releasing reset */ + if (td->panel_config->sleep.hw_reset) + msleep(td->panel_config->sleep.hw_reset); +} + static int taal_probe(struct omap_dss_device *dssdev) { struct backlight_properties props; struct taal_data *td; struct backlight_device *bldev; - int r; - - const struct omap_video_timings taal_panel_timings = { - .x_res = 864, - .y_res = 480, - }; + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); + struct panel_config *panel_config = NULL; + int r, i; dev_dbg(&dssdev->dev, "probe\n"); + if (!panel_data || !panel_data->name) { + r = -EINVAL; + goto err; + } + + for (i = 0; i < ARRAY_SIZE(panel_configs); i++) { + if (strcmp(panel_data->name, panel_configs[i].name) == 0) { + panel_config = &panel_configs[i]; + break; + } + } + + if (!panel_config) { + r = -EINVAL; + goto err; + } + dssdev->panel.config = OMAP_DSS_LCD_TFT; - dssdev->panel.timings = taal_panel_timings; + dssdev->panel.timings = panel_config->timings; dssdev->ctrl.pixel_size = 24; td = kzalloc(sizeof(*td), GFP_KERNEL); if (!td) { r = -ENOMEM; - goto err0; + goto err; } td->dssdev = dssdev; + td->panel_config = panel_config; mutex_init(&td->lock); + atomic_set(&td->do_update, 0); + + r = init_regulators(dssdev, panel_config->regulators, + panel_config->num_regulators); + if (r) + goto err_reg; + td->esd_wq = create_singlethread_workqueue("taal_esd"); if (td->esd_wq == NULL) { dev_err(&dssdev->dev, "can't create ESD workqueue\n"); r = -ENOMEM; - goto err1; + goto err_wq; } INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work); dev_set_drvdata(&dssdev->dev, td); + taal_hw_reset(dssdev); + /* if no platform set_backlight() defined, presume DSI backlight * control */ memset(&props, 0, sizeof(struct backlight_properties)); - if (!dssdev->set_backlight) + if (!panel_data->set_backlight) td->use_dsi_bl = true; if (td->use_dsi_bl) @@ -539,7 +733,7 @@ static int taal_probe(struct omap_dss_device *dssdev) &taal_bl_ops, &props); if (IS_ERR(bldev)) { r = PTR_ERR(bldev); - goto err2; + goto err_bl; } td->bldev = bldev; @@ -553,13 +747,13 @@ static int taal_probe(struct omap_dss_device *dssdev) taal_bl_update_status(bldev); - if (dssdev->phy.dsi.ext_te) { - int gpio = dssdev->phy.dsi.ext_te_gpio; + if (panel_data->use_ext_te) { + int gpio = panel_data->ext_te_gpio; r = gpio_request(gpio, "taal irq"); if (r) { dev_err(&dssdev->dev, "GPIO request failed\n"); - goto err3; + goto err_gpio; } gpio_direction_input(gpio); @@ -571,49 +765,52 @@ static int taal_probe(struct omap_dss_device *dssdev) if (r) { dev_err(&dssdev->dev, "IRQ request failed\n"); gpio_free(gpio); - goto err3; + goto err_irq; } - init_completion(&td->te_completion); + INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work, + taal_te_timeout_work_callback); - td->use_ext_te = true; + dev_dbg(&dssdev->dev, "Using GPIO TE\n"); } r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group); if (r) { dev_err(&dssdev->dev, "failed to create sysfs files\n"); - goto err4; + goto err_sysfs; } return 0; -err4: - if (td->use_ext_te) { - int gpio = dssdev->phy.dsi.ext_te_gpio; - free_irq(gpio_to_irq(gpio), dssdev); - gpio_free(gpio); - } -err3: +err_sysfs: + if (panel_data->use_ext_te) + free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev); +err_irq: + if (panel_data->use_ext_te) + gpio_free(panel_data->ext_te_gpio); +err_gpio: backlight_device_unregister(bldev); -err2: - cancel_delayed_work_sync(&td->esd_work); +err_bl: destroy_workqueue(td->esd_wq); -err1: +err_wq: + free_regulators(panel_config->regulators, panel_config->num_regulators); +err_reg: kfree(td); -err0: +err: return r; } static void taal_remove(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); struct backlight_device *bldev; dev_dbg(&dssdev->dev, "remove\n"); sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group); - if (td->use_ext_te) { - int gpio = dssdev->phy.dsi.ext_te_gpio; + if (panel_data->use_ext_te) { + int gpio = panel_data->ext_te_gpio; free_irq(gpio_to_irq(gpio), dssdev); gpio_free(gpio); } @@ -623,9 +820,15 @@ static void taal_remove(struct omap_dss_device *dssdev) taal_bl_update_status(bldev); backlight_device_unregister(bldev); - cancel_delayed_work_sync(&td->esd_work); + cancel_delayed_work(&td->esd_work); destroy_workqueue(td->esd_wq); + /* reset, to be sure that the panel is in a valid state */ + taal_hw_reset(dssdev); + + free_regulators(td->panel_config->regulators, + td->panel_config->num_regulators); + kfree(td); } @@ -635,23 +838,14 @@ static int taal_power_on(struct omap_dss_device *dssdev) u8 id1, id2, id3; int r; - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - return r; - } - - /* it seems we have to wait a bit until taal is ready */ - msleep(5); - - dsi_bus_lock(); - r = omapdss_dsi_display_enable(dssdev); if (r) { dev_err(&dssdev->dev, "failed to enable DSI\n"); goto err0; } + taal_hw_reset(dssdev); + omapdss_dsi_vc_enable_hs(TCH, false); r = taal_sleep_out(td); @@ -662,34 +856,47 @@ static int taal_power_on(struct omap_dss_device *dssdev) if (r) goto err; - /* on early revisions CABC is broken */ - if (id2 == 0x00 || id2 == 0xff || id2 == 0x81) + /* on early Taal revisions CABC is broken */ + if (td->panel_config->type == PANEL_TAAL && + (id2 == 0x00 || id2 == 0xff || id2 == 0x81)) td->cabc_broken = true; - taal_dcs_write_1(DCS_BRIGHTNESS, 0xff); - taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */ + r = taal_dcs_write_1(DCS_BRIGHTNESS, 0xff); + if (r) + goto err; + + r = taal_dcs_write_1(DCS_CTRL_DISPLAY, + (1<<2) | (1<<5)); /* BL | BCTRL */ + if (r) + goto err; + + r = taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */ + if (r) + goto err; - taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */ + r = taal_set_addr_mode(td->rotate, td->mirror); + if (r) + goto err; - taal_set_addr_mode(td->rotate, td->mirror); - if (!td->cabc_broken) - taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode); + if (!td->cabc_broken) { + r = taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode); + if (r) + goto err; + } - taal_dcs_write_0(DCS_DISPLAY_ON); + r = taal_dcs_write_0(DCS_DISPLAY_ON); + if (r) + goto err; r = _taal_enable_te(dssdev, td->te_enabled); if (r) goto err; -#ifdef TAAL_USE_ESD_CHECK - queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD); -#endif - td->enabled = 1; if (!td->intro_printed) { - dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n", - id1, id2, id3); + dev_info(&dssdev->dev, "%s panel revision %02x.%02x.%02x\n", + td->panel_config->name, id1, id2, id3); if (td->cabc_broken) dev_info(&dssdev->dev, "old Taal version, CABC disabled\n"); @@ -698,46 +905,44 @@ static int taal_power_on(struct omap_dss_device *dssdev) omapdss_dsi_vc_enable_hs(TCH, true); - dsi_bus_unlock(); - return 0; err: + dev_err(&dssdev->dev, "error while enabling panel, issuing HW reset\n"); + + taal_hw_reset(dssdev); + omapdss_dsi_display_disable(dssdev); err0: - dsi_bus_unlock(); - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - return r; } static void taal_power_off(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int r; - dsi_bus_lock(); - - cancel_delayed_work(&td->esd_work); - - taal_dcs_write_0(DCS_DISPLAY_OFF); - taal_sleep_in(td); + r = taal_dcs_write_0(DCS_DISPLAY_OFF); + if (!r) { + r = taal_sleep_in(td); + /* HACK: wait a bit so that the message goes through */ + msleep(10); + } - /* wait a bit so that the message goes through */ - msleep(10); + if (r) { + dev_err(&dssdev->dev, + "error disabling panel, issuing HW reset\n"); + taal_hw_reset(dssdev); + } omapdss_dsi_display_disable(dssdev); - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - td->enabled = 0; - - dsi_bus_unlock(); } static int taal_enable(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); int r; dev_dbg(&dssdev->dev, "enable\n"); @@ -749,10 +954,19 @@ static int taal_enable(struct omap_dss_device *dssdev) goto err; } + dsi_bus_lock(); + r = taal_power_on(dssdev); + + dsi_bus_unlock(); + if (r) goto err; + if (panel_data->use_esd_check) + queue_delayed_work(td->esd_wq, &td->esd_work, + TAAL_ESD_CHECK_PERIOD); + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; mutex_unlock(&td->lock); @@ -772,9 +986,15 @@ static void taal_disable(struct omap_dss_device *dssdev) mutex_lock(&td->lock); + cancel_delayed_work(&td->esd_work); + + dsi_bus_lock(); + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) taal_power_off(dssdev); + dsi_bus_unlock(); + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; mutex_unlock(&td->lock); @@ -794,7 +1014,14 @@ static int taal_suspend(struct omap_dss_device *dssdev) goto err; } + cancel_delayed_work(&td->esd_work); + + dsi_bus_lock(); + taal_power_off(dssdev); + + dsi_bus_unlock(); + dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; mutex_unlock(&td->lock); @@ -808,6 +1035,7 @@ err: static int taal_resume(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); int r; dev_dbg(&dssdev->dev, "resume\n"); @@ -819,8 +1047,20 @@ static int taal_resume(struct omap_dss_device *dssdev) goto err; } + dsi_bus_lock(); + r = taal_power_on(dssdev); - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + + dsi_bus_unlock(); + + if (r) { + dssdev->state = OMAP_DSS_DISPLAY_DISABLED; + } else { + dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; + if (panel_data->use_esd_check) + queue_delayed_work(td->esd_wq, &td->esd_work, + TAAL_ESD_CHECK_PERIOD); + } mutex_unlock(&td->lock); @@ -837,10 +1077,52 @@ static void taal_framedone_cb(int err, void *data) dsi_bus_unlock(); } +static irqreturn_t taal_te_isr(int irq, void *data) +{ + struct omap_dss_device *dssdev = data; + struct taal_data *td = dev_get_drvdata(&dssdev->dev); + int old; + int r; + + old = atomic_cmpxchg(&td->do_update, 1, 0); + + if (old) { + cancel_delayed_work(&td->te_timeout_work); + + r = omap_dsi_update(dssdev, TCH, + td->update_region.x, + td->update_region.y, + td->update_region.w, + td->update_region.h, + taal_framedone_cb, dssdev); + if (r) + goto err; + } + + return IRQ_HANDLED; +err: + dev_err(&dssdev->dev, "start update failed\n"); + dsi_bus_unlock(); + return IRQ_HANDLED; +} + +static void taal_te_timeout_work_callback(struct work_struct *work) +{ + struct taal_data *td = container_of(work, struct taal_data, + te_timeout_work.work); + struct omap_dss_device *dssdev = td->dssdev; + + dev_err(&dssdev->dev, "TE not received for 250ms!\n"); + + atomic_set(&td->do_update, 0); + dsi_bus_unlock(); +} + static int taal_update(struct omap_dss_device *dssdev, u16 x, u16 y, u16 w, u16 h) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); int r; dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h); @@ -853,7 +1135,7 @@ static int taal_update(struct omap_dss_device *dssdev, goto err; } - r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h); + r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h, true); if (r) goto err; @@ -861,10 +1143,21 @@ static int taal_update(struct omap_dss_device *dssdev, if (r) goto err; - r = omap_dsi_update(dssdev, TCH, x, y, w, h, - taal_framedone_cb, dssdev); - if (r) - goto err; + if (td->te_enabled && panel_data->use_ext_te) { + td->update_region.x = x; + td->update_region.y = y; + td->update_region.w = w; + td->update_region.h = h; + barrier(); + schedule_delayed_work(&td->te_timeout_work, + msecs_to_jiffies(250)); + atomic_set(&td->do_update, 1); + } else { + r = omap_dsi_update(dssdev, TCH, x, y, w, h, + taal_framedone_cb, dssdev); + if (r) + goto err; + } /* note: no bus_unlock here. unlock is in framedone_cb */ mutex_unlock(&td->lock); @@ -894,20 +1187,19 @@ static int taal_sync(struct omap_dss_device *dssdev) static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); int r; - td->te_enabled = enable; - if (enable) r = taal_dcs_write_1(DCS_TEAR_ON, 0); else r = taal_dcs_write_0(DCS_TEAR_OFF); - omapdss_dsi_enable_te(dssdev, enable); + if (!panel_data->use_ext_te) + omapdss_dsi_enable_te(dssdev, enable); - /* XXX for some reason, DSI TE breaks if we don't wait here. - * Panel bug? Needs more studying */ - msleep(100); + if (td->panel_config->sleep.enable_te) + msleep(td->panel_config->sleep.enable_te); return r; } @@ -918,10 +1210,26 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable) int r; mutex_lock(&td->lock); + + if (td->te_enabled == enable) + goto end; + dsi_bus_lock(); - r = _taal_enable_te(dssdev, enable); + if (td->enabled) { + r = _taal_enable_te(dssdev, enable); + if (r) + goto err; + } + + td->te_enabled = enable; + + dsi_bus_unlock(); +end: + mutex_unlock(&td->lock); + return 0; +err: dsi_bus_unlock(); mutex_unlock(&td->lock); @@ -948,6 +1256,10 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) dev_dbg(&dssdev->dev, "rotate %d\n", rotate); mutex_lock(&td->lock); + + if (td->rotate == rotate) + goto end; + dsi_bus_lock(); if (td->enabled) { @@ -959,6 +1271,7 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate) td->rotate = rotate; dsi_bus_unlock(); +end: mutex_unlock(&td->lock); return 0; err: @@ -987,6 +1300,10 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable) dev_dbg(&dssdev->dev, "mirror %d\n", enable); mutex_lock(&td->lock); + + if (td->mirror == enable) + goto end; + dsi_bus_lock(); if (td->enabled) { r = taal_set_addr_mode(td->rotate, enable); @@ -997,6 +1314,7 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable) td->mirror = enable; dsi_bus_unlock(); +end: mutex_unlock(&td->lock); return 0; err: @@ -1024,23 +1342,30 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num) int r; mutex_lock(&td->lock); + + if (!td->enabled) { + r = -ENODEV; + goto err1; + } + dsi_bus_lock(); r = taal_dcs_read_1(DCS_GET_ID1, &id1); if (r) - goto err; + goto err2; r = taal_dcs_read_1(DCS_GET_ID2, &id2); if (r) - goto err; + goto err2; r = taal_dcs_read_1(DCS_GET_ID3, &id3); if (r) - goto err; + goto err2; dsi_bus_unlock(); mutex_unlock(&td->lock); return 0; -err: +err2: dsi_bus_unlock(); +err1: mutex_unlock(&td->lock); return r; } @@ -1128,6 +1453,7 @@ static void taal_esd_work(struct work_struct *work) struct taal_data *td = container_of(work, struct taal_data, esd_work.work); struct omap_dss_device *dssdev = td->dssdev; + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); u8 state1, state2; int r; @@ -1168,7 +1494,7 @@ static void taal_esd_work(struct work_struct *work) } /* Self-diagnostics result is also shown on TE GPIO line. We need * to re-enable TE after self diagnostics */ - if (td->use_ext_te && td->te_enabled) { + if (td->te_enabled && panel_data->use_ext_te) { r = taal_dcs_write_1(DCS_TEAR_ON, 0); if (r) goto err; @@ -1184,6 +1510,7 @@ err: dev_err(&dssdev->dev, "performing LCD reset\n"); taal_power_off(dssdev); + taal_hw_reset(dssdev); taal_power_on(dssdev); dsi_bus_unlock(); diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c index fa434ca6e4b7..e320e67d06f3 100644 --- a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c +++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c @@ -73,8 +73,12 @@ static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev) static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev) { - dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | - OMAP_DSS_LCD_IHS; + dssdev->panel.config = OMAP_DSS_LCD_TFT | + OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS | + OMAP_DSS_LCD_IPC | + OMAP_DSS_LCD_ONOFF; + dssdev->panel.timings = toppoly_tdo_panel_timings; return 0; diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index e777e352dbcd..5ecdc0004094 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -31,6 +31,7 @@ #include <linux/seq_file.h> #include <linux/delay.h> #include <linux/workqueue.h> +#include <linux/hardirq.h> #include <plat/sram.h> #include <plat/clock.h> @@ -335,7 +336,7 @@ void dispc_save_context(void) void dispc_restore_context(void) { RR(SYSCONFIG); - RR(IRQENABLE); + /*RR(IRQENABLE);*/ /*RR(CONTROL);*/ RR(CONFIG); RR(DEFAULT_COLOR0); @@ -472,6 +473,15 @@ void dispc_restore_context(void) /* enable last, because LCD & DIGIT enable are here */ RR(CONTROL); + + /* clear spurious SYNC_LOST_DIGIT interrupts */ + dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); + + /* + * enable last so IRQs won't trigger before + * the context is fully restored + */ + RR(IRQENABLE); } #undef SR @@ -3019,7 +3029,7 @@ void dispc_fake_vsync_irq(void) u32 irqstatus = DISPC_IRQ_VSYNC; int i; - local_irq_disable(); + WARN_ON(!in_interrupt()); for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { struct omap_dispc_isr_data *isr_data; @@ -3031,8 +3041,6 @@ void dispc_fake_vsync_irq(void) if (isr_data->mask & irqstatus) isr_data->isr(isr_data->arg, irqstatus); } - - local_irq_enable(); } #endif diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c index ef8c8529dda2..22dd7a474f79 100644 --- a/drivers/video/omap2/dss/display.c +++ b/drivers/video/omap2/dss/display.c @@ -82,6 +82,9 @@ static ssize_t display_upd_mode_store(struct device *dev, int val, r; enum omap_dss_update_mode mode; + if (!dssdev->driver->set_update_mode) + return -EINVAL; + val = simple_strtoul(buf, NULL, 10); switch (val) { @@ -343,7 +346,6 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev) case OMAP_DISPLAY_TYPE_VENC: case OMAP_DISPLAY_TYPE_SDI: return 24; - return 24; default: BUG(); } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 3af207b2bde3..b3fa3a7db911 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -165,6 +165,14 @@ struct dsi_reg { u16 idx; }; #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) +#define DSI_CIO_IRQ_ERROR_MASK \ + (DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \ + DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \ + DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRCONTROL1 | \ + DSI_CIO_IRQ_ERRCONTROL2 | DSI_CIO_IRQ_ERRCONTROL3 | \ + DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \ + DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \ + DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3) #define DSI_DT_DCS_SHORT_WRITE_0 0x05 #define DSI_DT_DCS_SHORT_WRITE_1 0x15 @@ -232,13 +240,15 @@ static struct unsigned pll_locked; struct completion bta_completion; + void (*bta_callback)(void); int update_channel; struct dsi_update_region update_region; bool te_enabled; - struct work_struct framedone_work; + struct workqueue_struct *workqueue; + void (*framedone_callback)(int, void *); void *framedone_data; @@ -509,9 +519,13 @@ void dsi_irq_handler(void) dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]); #endif - if (vcstatus & DSI_VC_IRQ_BTA) + if (vcstatus & DSI_VC_IRQ_BTA) { complete(&dsi.bta_completion); + if (dsi.bta_callback) + dsi.bta_callback(); + } + if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { DSSERR("DSI VC(%d) error, vc irqstatus %x\n", i, vcstatus); @@ -536,8 +550,12 @@ void dsi_irq_handler(void) /* flush posted write */ dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); - DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); - print_irq_status_cio(ciostatus); + if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) { + DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); + print_irq_status_cio(ciostatus); + } else if (debug_irq) { + print_irq_status_cio(ciostatus); + } } dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); @@ -584,11 +602,8 @@ static void _dsi_initialize_irq(void) for (i = 0; i < 4; ++i) dsi_write_reg(DSI_VC_IRQENABLE(i), l); - /* XXX zonda responds incorrectly, causing control error: - Exit from LP-ESC mode to LP11 uses wrong transition states on the - data lines LP0 and LN0. */ - dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, - -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); + l = DSI_CIO_IRQ_ERROR_MASK; + dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, l); } static u32 dsi_get_errors(void) @@ -1098,6 +1113,7 @@ int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { DSSERR("PLL not coming out of reset.\n"); r = -ENODEV; + dispc_pck_free_enable(0); goto err1; } @@ -1740,42 +1756,52 @@ static void dsi_vc_initial_config(int channel) dsi.vc[channel].mode = DSI_VC_MODE_L4; } -static void dsi_vc_config_l4(int channel) +static int dsi_vc_config_l4(int channel) { if (dsi.vc[channel].mode == DSI_VC_MODE_L4) - return; + return 0; DSSDBGF("%d", channel); dsi_vc_enable(channel, 0); - if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ + /* VC_BUSY */ + if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) { DSSERR("vc(%d) busy when trying to config for L4\n", channel); + return -EIO; + } REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ dsi_vc_enable(channel, 1); dsi.vc[channel].mode = DSI_VC_MODE_L4; + + return 0; } -static void dsi_vc_config_vp(int channel) +static int dsi_vc_config_vp(int channel) { if (dsi.vc[channel].mode == DSI_VC_MODE_VP) - return; + return 0; DSSDBGF("%d", channel); dsi_vc_enable(channel, 0); - if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ + /* VC_BUSY */ + if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) { DSSERR("vc(%d) busy when trying to config for VP\n", channel); + return -EIO; + } REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ dsi_vc_enable(channel, 1); dsi.vc[channel].mode = DSI_VC_MODE_VP; + + return 0; } @@ -1854,19 +1880,19 @@ static u16 dsi_vc_flush_receive_data(int channel) u32 val; u8 dt; val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); - DSSDBG("\trawval %#08x\n", val); + DSSERR("\trawval %#08x\n", val); dt = FLD_GET(val, 5, 0); if (dt == DSI_DT_RX_ACK_WITH_ERR) { u16 err = FLD_GET(val, 23, 8); dsi_show_rx_ack_with_err(err); } else if (dt == DSI_DT_RX_SHORT_READ_1) { - DSSDBG("\tDCS short response, 1 byte: %#x\n", + DSSERR("\tDCS short response, 1 byte: %#x\n", FLD_GET(val, 23, 8)); } else if (dt == DSI_DT_RX_SHORT_READ_2) { - DSSDBG("\tDCS short response, 2 byte: %#x\n", + DSSERR("\tDCS short response, 2 byte: %#x\n", FLD_GET(val, 23, 8)); } else if (dt == DSI_DT_RX_DCS_LONG_READ) { - DSSDBG("\tDCS long response, len %d\n", + DSSERR("\tDCS long response, len %d\n", FLD_GET(val, 23, 8)); dsi_vc_flush_long_data(channel); } else { @@ -2087,6 +2113,13 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len) if (r) goto err; + if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ + DSSERR("rx fifo not empty after write, dumping data:\n"); + dsi_vc_flush_receive_data(channel); + r = -EIO; + goto err; + } + return 0; err: DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n", @@ -2233,11 +2266,12 @@ int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data) } EXPORT_SYMBOL(dsi_vc_dcs_read_1); -int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data) +int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2) { + u8 buf[2]; int r; - r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2); + r = dsi_vc_dcs_read(channel, dcs_cmd, buf, 2); if (r < 0) return r; @@ -2245,231 +2279,122 @@ int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data) if (r != 2) return -EIO; + *data1 = buf[0]; + *data2 = buf[1]; + return 0; } EXPORT_SYMBOL(dsi_vc_dcs_read_2); int dsi_vc_set_max_rx_packet_size(int channel, u16 len) { - int r; - r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, + return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, len, 0); - - if (r) - return r; - - r = dsi_vc_send_bta_sync(channel); - - return r; } EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); -static void dsi_set_lp_rx_timeout(unsigned long ns) +static void dsi_set_lp_rx_timeout(unsigned ticks, bool x4, bool x16) { - u32 r; - unsigned x4, x16; unsigned long fck; - unsigned long ticks; + unsigned long total_ticks; + u32 r; - /* ticks in DSI_FCK */ + BUG_ON(ticks > 0x1fff); + /* ticks in DSI_FCK */ fck = dsi_fclk_rate(); - ticks = (fck / 1000 / 1000) * ns / 1000; - x4 = 0; - x16 = 0; - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 4; - x4 = 1; - x16 = 0; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 16; - x4 = 0; - x16 = 1; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); - x4 = 1; - x16 = 1; - } - - if (ticks > 0x1fff) { - DSSWARN("LP_TX_TO over limit, setting it to max\n"); - ticks = 0x1fff; - x4 = 1; - x16 = 1; - } r = dsi_read_reg(DSI_TIMING2); r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ - r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ - r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ + r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* LP_RX_TO_X16 */ + r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* LP_RX_TO_X4 */ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ dsi_write_reg(DSI_TIMING2, r); - DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n", - (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / - (fck / 1000 / 1000), - ticks, x4 ? " x4" : "", x16 ? " x16" : ""); + total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1); + + DSSDBG("LP_RX_TO %lu ticks (%#x%s%s) = %lu ns\n", + total_ticks, + ticks, x4 ? " x4" : "", x16 ? " x16" : "", + (total_ticks * 1000) / (fck / 1000 / 1000)); } -static void dsi_set_ta_timeout(unsigned long ns) +static void dsi_set_ta_timeout(unsigned ticks, bool x8, bool x16) { - u32 r; - unsigned x8, x16; unsigned long fck; - unsigned long ticks; + unsigned long total_ticks; + u32 r; + + BUG_ON(ticks > 0x1fff); /* ticks in DSI_FCK */ fck = dsi_fclk_rate(); - ticks = (fck / 1000 / 1000) * ns / 1000; - x8 = 0; - x16 = 0; - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 8; - x8 = 1; - x16 = 0; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 16; - x8 = 0; - x16 = 1; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16); - x8 = 1; - x16 = 1; - } - - if (ticks > 0x1fff) { - DSSWARN("TA_TO over limit, setting it to max\n"); - ticks = 0x1fff; - x8 = 1; - x16 = 1; - } r = dsi_read_reg(DSI_TIMING1); r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ - r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ - r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ + r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* TA_TO_X16 */ + r = FLD_MOD(r, x8 ? 1 : 0, 29, 29); /* TA_TO_X8 */ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ dsi_write_reg(DSI_TIMING1, r); - DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n", - (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / - (fck / 1000 / 1000), - ticks, x8 ? " x8" : "", x16 ? " x16" : ""); + total_ticks = ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1); + + DSSDBG("TA_TO %lu ticks (%#x%s%s) = %lu ns\n", + total_ticks, + ticks, x8 ? " x8" : "", x16 ? " x16" : "", + (total_ticks * 1000) / (fck / 1000 / 1000)); } -static void dsi_set_stop_state_counter(unsigned long ns) +static void dsi_set_stop_state_counter(unsigned ticks, bool x4, bool x16) { - u32 r; - unsigned x4, x16; unsigned long fck; - unsigned long ticks; + unsigned long total_ticks; + u32 r; - /* ticks in DSI_FCK */ + BUG_ON(ticks > 0x1fff); + /* ticks in DSI_FCK */ fck = dsi_fclk_rate(); - ticks = (fck / 1000 / 1000) * ns / 1000; - x4 = 0; - x16 = 0; - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 4; - x4 = 1; - x16 = 0; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 16; - x4 = 0; - x16 = 1; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); - x4 = 1; - x16 = 1; - } - - if (ticks > 0x1fff) { - DSSWARN("STOP_STATE_COUNTER_IO over limit, " - "setting it to max\n"); - ticks = 0x1fff; - x4 = 1; - x16 = 1; - } r = dsi_read_reg(DSI_TIMING1); r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ - r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ - r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ + r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* STOP_STATE_X16_IO */ + r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* STOP_STATE_X4_IO */ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ dsi_write_reg(DSI_TIMING1, r); - DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n", - (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / - (fck / 1000 / 1000), - ticks, x4 ? " x4" : "", x16 ? " x16" : ""); + total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1); + + DSSDBG("STOP_STATE_COUNTER %lu ticks (%#x%s%s) = %lu ns\n", + total_ticks, + ticks, x4 ? " x4" : "", x16 ? " x16" : "", + (total_ticks * 1000) / (fck / 1000 / 1000)); } -static void dsi_set_hs_tx_timeout(unsigned long ns) +static void dsi_set_hs_tx_timeout(unsigned ticks, bool x4, bool x16) { - u32 r; - unsigned x4, x16; unsigned long fck; - unsigned long ticks; + unsigned long total_ticks; + u32 r; - /* ticks in TxByteClkHS */ + BUG_ON(ticks > 0x1fff); + /* ticks in TxByteClkHS */ fck = dsi_get_txbyteclkhs(); - ticks = (fck / 1000 / 1000) * ns / 1000; - x4 = 0; - x16 = 0; - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 4; - x4 = 1; - x16 = 0; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / 16; - x4 = 0; - x16 = 1; - } - - if (ticks > 0x1fff) { - ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); - x4 = 1; - x16 = 1; - } - - if (ticks > 0x1fff) { - DSSWARN("HS_TX_TO over limit, setting it to max\n"); - ticks = 0x1fff; - x4 = 1; - x16 = 1; - } r = dsi_read_reg(DSI_TIMING2); r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ - r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ - r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ + r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* HS_TX_TO_X16 */ + r = FLD_MOD(r, x4 ? 1 : 0, 29, 29); /* HS_TX_TO_X8 (4 really) */ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ dsi_write_reg(DSI_TIMING2, r); - DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n", - (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / - (fck / 1000 / 1000), - ticks, x4 ? " x4" : "", x16 ? " x16" : ""); + total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1); + + DSSDBG("HS_TX_TO %lu ticks (%#x%s%s) = %lu ns\n", + total_ticks, + ticks, x4 ? " x4" : "", x16 ? " x16" : "", + (total_ticks * 1000) / (fck / 1000 / 1000)); } static int dsi_proto_config(struct omap_dss_device *dssdev) { @@ -2487,10 +2412,10 @@ static int dsi_proto_config(struct omap_dss_device *dssdev) DSI_FIFO_SIZE_32); /* XXX what values for the timeouts? */ - dsi_set_stop_state_counter(1000); - dsi_set_ta_timeout(6400000); - dsi_set_lp_rx_timeout(48000); - dsi_set_hs_tx_timeout(1000000); + dsi_set_stop_state_counter(0x1000, false, false); + dsi_set_ta_timeout(0x1fff, true, true); + dsi_set_lp_rx_timeout(0x1fff, true, true); + dsi_set_hs_tx_timeout(0x1fff, true, true); switch (dssdev->ctrl.pixel_size) { case 16: @@ -2759,6 +2684,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, unsigned packet_payload; unsigned packet_len; u32 l; + int r; const unsigned channel = dsi.update_channel; /* line buffer is 1024 x 24bits */ /* XXX: for some reason using full buffer size causes considerable TX @@ -2809,8 +2735,9 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, dsi_perf_mark_start(); - schedule_delayed_work(&dsi.framedone_timeout_work, + r = queue_delayed_work(dsi.workqueue, &dsi.framedone_timeout_work, msecs_to_jiffies(250)); + BUG_ON(r == 0); dss_start_update(dssdev); @@ -2834,62 +2761,70 @@ static void dsi_te_timeout(unsigned long arg) } #endif -static void dsi_framedone_timeout_work_callback(struct work_struct *work) +static void dsi_handle_framedone(int error) { - int r; const int channel = dsi.update_channel; - DSSERR("Framedone not received for 250ms!\n"); + cancel_delayed_work(&dsi.framedone_timeout_work); + + dsi_vc_disable_bta_irq(channel); /* SIDLEMODE back to smart-idle */ dispc_enable_sidle(); + dsi.bta_callback = NULL; + if (dsi.te_enabled) { /* enable LP_RX_TO again after the TE */ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ } - /* Send BTA after the frame. We need this for the TE to work, as TE - * trigger is only sent for BTAs without preceding packet. Thus we need - * to BTA after the pixel packets so that next BTA will cause TE - * trigger. - * - * This is not needed when TE is not in use, but we do it anyway to - * make sure that the transfer has been completed. It would be more - * optimal, but more complex, to wait only just before starting next - * transfer. */ - r = dsi_vc_send_bta_sync(channel); - if (r) - DSSERR("BTA after framedone failed\n"); - /* RX_FIFO_NOT_EMPTY */ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { DSSERR("Received error during frame transfer:\n"); dsi_vc_flush_receive_data(channel); + if (!error) + error = -EIO; } - dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data); + dsi.framedone_callback(error, dsi.framedone_data); + + if (!error) + dsi_perf_show("DISPC"); } -static void dsi_framedone_irq_callback(void *data, u32 mask) +static void dsi_framedone_timeout_work_callback(struct work_struct *work) { - /* Note: We get FRAMEDONE when DISPC has finished sending pixels and - * turns itself off. However, DSI still has the pixels in its buffers, - * and is sending the data. - */ + /* XXX While extremely unlikely, we could get FRAMEDONE interrupt after + * 250ms which would conflict with this timeout work. What should be + * done is first cancel the transfer on the HW, and then cancel the + * possibly scheduled framedone work. However, cancelling the transfer + * on the HW is buggy, and would probably require resetting the whole + * DSI */ - /* SIDLEMODE back to smart-idle */ - dispc_enable_sidle(); + DSSERR("Framedone not received for 250ms!\n"); - schedule_work(&dsi.framedone_work); + dsi_handle_framedone(-ETIMEDOUT); } -static void dsi_handle_framedone(void) +static void dsi_framedone_bta_callback(void) +{ + dsi_handle_framedone(0); + +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC + dispc_fake_vsync_irq(); +#endif +} + +static void dsi_framedone_irq_callback(void *data, u32 mask) { - int r; const int channel = dsi.update_channel; + int r; - DSSDBG("FRAMEDONE\n"); + /* Note: We get FRAMEDONE when DISPC has finished sending pixels and + * turns itself off. However, DSI still has the pixels in its buffers, + * and is sending the data. + */ if (dsi.te_enabled) { /* enable LP_RX_TO again after the TE */ @@ -2904,37 +2839,30 @@ static void dsi_handle_framedone(void) * This is not needed when TE is not in use, but we do it anyway to * make sure that the transfer has been completed. It would be more * optimal, but more complex, to wait only just before starting next - * transfer. */ - r = dsi_vc_send_bta_sync(channel); - if (r) - DSSERR("BTA after framedone failed\n"); - - /* RX_FIFO_NOT_EMPTY */ - if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { - DSSERR("Received error during frame transfer:\n"); - dsi_vc_flush_receive_data(channel); - } - -#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC - dispc_fake_vsync_irq(); -#endif -} - -static void dsi_framedone_work_callback(struct work_struct *work) -{ - DSSDBGF(); + * transfer. + * + * Also, as there's no interrupt telling when the transfer has been + * done and the channel could be reconfigured, the only way is to + * busyloop until TE_SIZE is zero. With BTA we can do this + * asynchronously. + * */ - cancel_delayed_work_sync(&dsi.framedone_timeout_work); + dsi.bta_callback = dsi_framedone_bta_callback; - dsi_handle_framedone(); + barrier(); - dsi_perf_show("DISPC"); + dsi_vc_enable_bta_irq(channel); - dsi.framedone_callback(0, dsi.framedone_data); + r = dsi_vc_send_bta(channel); + if (r) { + DSSERR("BTA after framedone failed\n"); + dsi_handle_framedone(-EIO); + } } int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h) + u16 *x, u16 *y, u16 *w, u16 *h, + bool enlarge_update_area) { u16 dw, dh; @@ -2958,7 +2886,8 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev, dsi_perf_mark_setup(); if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { - dss_setup_partial_planes(dssdev, x, y, w, h); + dss_setup_partial_planes(dssdev, x, y, w, h, + enlarge_update_area); dispc_set_lcd_size(*w, *h); } @@ -2973,6 +2902,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev, { dsi.update_channel = channel; + /* OMAP DSS cannot send updates of odd widths. + * omap_dsi_prepare_update() makes the widths even, but add a BUG_ON + * here to make sure we catch erroneous updates. Otherwise we'll only + * see rather obscure HW error happening, as DSS halts. */ + BUG_ON(x % 2 == 1); + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { dsi.framedone_callback = callback; dsi.framedone_data = data; @@ -2985,7 +2920,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev, dsi_update_screen_dispc(dssdev, x, y, w, h); } else { - dsi_update_screen_l4(dssdev, x, y, w, h); + int r; + + r = dsi_update_screen_l4(dssdev, x, y, w, h); + if (r) + return r; + dsi_perf_show("L4"); callback(0, data); } @@ -3048,8 +2988,10 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) cinfo.regm3 = dssdev->phy.dsi.div.regm3; cinfo.regm4 = dssdev->phy.dsi.div.regm4; r = dsi_calc_clock_rates(&cinfo); - if (r) + if (r) { + DSSERR("Failed to calc dsi clocks\n"); return r; + } r = dsi_pll_set_clock_div(&cinfo); if (r) { @@ -3147,6 +3089,13 @@ err0: static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) { + /* disable interface */ + dsi_if_enable(0); + dsi_vc_enable(0, 0); + dsi_vc_enable(1, 0); + dsi_vc_enable(2, 0); + dsi_vc_enable(3, 0); + dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); dsi_complexio_uninit(); @@ -3257,7 +3206,7 @@ void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, burst_size_bytes = 16 * 32 / 8; *fifo_high = fifo_size - burst_size_bytes; - *fifo_low = fifo_size - burst_size_bytes * 8; + *fifo_low = fifo_size - burst_size_bytes * 2; } int dsi_init_display(struct omap_dss_device *dssdev) @@ -3274,6 +3223,18 @@ int dsi_init_display(struct omap_dss_device *dssdev) return 0; } +void dsi_wait_dsi1_pll_active(void) +{ + if (wait_for_bit_change(DSI_PLL_STATUS, 7, 1) != 1) + DSSERR("DSI1 PLL clock not active\n"); +} + +void dsi_wait_dsi2_pll_active(void) +{ + if (wait_for_bit_change(DSI_PLL_STATUS, 8, 1) != 1) + DSSERR("DSI2 PLL clock not active\n"); +} + int dsi_init(struct platform_device *pdev) { u32 rev; @@ -3292,7 +3253,10 @@ int dsi_init(struct platform_device *pdev) mutex_init(&dsi.lock); sema_init(&dsi.bus_lock, 1); - INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback); + dsi.workqueue = create_singlethread_workqueue("dsi"); + if (dsi.workqueue == NULL) + return -ENOMEM; + INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work, dsi_framedone_timeout_work_callback); @@ -3328,6 +3292,7 @@ int dsi_init(struct platform_device *pdev) err2: iounmap(dsi.base); err1: + destroy_workqueue(dsi.workqueue); return r; } @@ -3335,6 +3300,8 @@ void dsi_exit(void) { iounmap(dsi.base); + destroy_workqueue(dsi.workqueue); + DSSDBG("omap_dsi_exit\n"); } diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 24b18258654f..77c3621c9171 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -265,6 +265,9 @@ void dss_select_dispc_clk_source(enum dss_clk_source clk_src) b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1; + if (clk_src == DSS_SRC_DSI1_PLL_FCLK) + dsi_wait_dsi1_pll_active(); + REG_FLD_MOD(DSS_CONTROL, b, 0, 0); /* DISPC_CLK_SWITCH */ dss.dispc_clk_source = clk_src; @@ -279,6 +282,9 @@ void dss_select_dsi_clk_source(enum dss_clk_source clk_src) b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1; + if (clk_src == DSS_SRC_DSI2_PLL_FCLK) + dsi_wait_dsi2_pll_active(); + REG_FLD_MOD(DSS_CONTROL, b, 1, 1); /* DSI_CLK_SWITCH */ dss.dsi_clk_source = clk_src; diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 786f433fd571..5c7940d5f282 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -199,7 +199,8 @@ int dss_init_overlay_managers(struct platform_device *pdev); void dss_uninit_overlay_managers(struct platform_device *pdev); int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); void dss_setup_partial_planes(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); + u16 *x, u16 *y, u16 *w, u16 *h, + bool enlarge_update_area); void dss_start_update(struct omap_dss_device *dssdev); /* overlay */ @@ -281,6 +282,8 @@ void dsi_pll_uninit(void); void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, u32 fifo_size, enum omap_burst_size *burst_size, u32 *fifo_low, u32 *fifo_high); +void dsi_wait_dsi1_pll_active(void); +void dsi_wait_dsi2_pll_active(void); #else static inline int dsi_init(struct platform_device *pdev) { @@ -289,6 +292,12 @@ static inline int dsi_init(struct platform_device *pdev) static inline void dsi_exit(void) { } +static inline void dsi_wait_dsi1_pll_active(void) +{ +} +static inline void dsi_wait_dsi2_pll_active(void) +{ +} #endif /* DPI */ diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 9e1fbe531bf0..6a649ab5539e 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -440,6 +440,10 @@ struct manager_cache_data { /* manual update region */ u16 x, y, w, h; + + /* enlarge the update area if the update area contains scaled + * overlays */ + bool enlarge_update_area; }; static struct { @@ -525,7 +529,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) int i; struct omap_dss_device *dssdev = mgr->device; - if (!dssdev) + if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return 0; if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { @@ -596,11 +600,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) int r; int i; - if (!ovl->manager || !ovl->manager->device) + if (!ovl->manager) return 0; dssdev = ovl->manager->device; + if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) + return 0; + if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; channel = OMAP_DSS_CHANNEL_DIGIT; @@ -718,6 +725,7 @@ static int configure_overlay(enum omap_plane plane) u16 x, y, w, h; u32 paddr; int r; + u16 orig_w, orig_h, orig_outw, orig_outh; DSSDBGF("%d", plane); @@ -738,8 +746,16 @@ static int configure_overlay(enum omap_plane plane) outh = c->out_height == 0 ? c->height : c->out_height; paddr = c->paddr; + orig_w = w; + orig_h = h; + orig_outw = outw; + orig_outh = outh; + if (c->manual_update && mc->do_manual_update) { unsigned bpp; + unsigned scale_x_m = w, scale_x_d = outw; + unsigned scale_y_m = h, scale_y_d = outh; + /* If the overlay is outside the update region, disable it */ if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h, x, y, outw, outh)) { @@ -770,38 +786,47 @@ static int configure_overlay(enum omap_plane plane) BUG(); } - if (dispc_is_overlay_scaled(c)) { - /* If the overlay is scaled, the update area has - * already been enlarged to cover the whole overlay. We - * only need to adjust x/y here */ - x = c->pos_x - mc->x; - y = c->pos_y - mc->y; + if (mc->x > c->pos_x) { + x = 0; + outw -= (mc->x - c->pos_x); + paddr += (mc->x - c->pos_x) * + scale_x_m / scale_x_d * bpp / 8; } else { - if (mc->x > c->pos_x) { - x = 0; - w -= (mc->x - c->pos_x); - paddr += (mc->x - c->pos_x) * bpp / 8; - } else { - x = c->pos_x - mc->x; - } - - if (mc->y > c->pos_y) { - y = 0; - h -= (mc->y - c->pos_y); - paddr += (mc->y - c->pos_y) * c->screen_width * - bpp / 8; - } else { - y = c->pos_y - mc->y; - } - - if (mc->w < (x+w)) - w -= (x+w) - (mc->w); + x = c->pos_x - mc->x; + } - if (mc->h < (y+h)) - h -= (y+h) - (mc->h); + if (mc->y > c->pos_y) { + y = 0; + outh -= (mc->y - c->pos_y); + paddr += (mc->y - c->pos_y) * + scale_y_m / scale_y_d * + c->screen_width * bpp / 8; + } else { + y = c->pos_y - mc->y; + } - outw = w; - outh = h; + if (mc->w < (x + outw)) + outw -= (x + outw) - (mc->w); + + if (mc->h < (y + outh)) + outh -= (y + outh) - (mc->h); + + w = w * outw / orig_outw; + h = h * outh / orig_outh; + + /* YUV mode overlay's input width has to be even and the + * algorithm above may adjust the width to be odd. + * + * Here we adjust the width if needed, preferring to increase + * the width if the original width was bigger. + */ + if ((w & 1) && + (c->color_mode == OMAP_DSS_COLOR_YUV2 || + c->color_mode == OMAP_DSS_COLOR_UYVY)) { + if (orig_w > w) + w += 1; + else + w -= 1; } } @@ -960,7 +985,7 @@ static void make_even(u16 *x, u16 *w) /* Configure dispc for partial update. Return possibly modified update * area */ void dss_setup_partial_planes(struct omap_dss_device *dssdev, - u16 *xi, u16 *yi, u16 *wi, u16 *hi) + u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area) { struct overlay_cache_data *oc; struct manager_cache_data *mc; @@ -969,6 +994,7 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev, int i; u16 x, y, w, h; unsigned long flags; + bool area_changed; x = *xi; y = *yi; @@ -989,73 +1015,91 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev, spin_lock_irqsave(&dss_cache.lock, flags); - /* We need to show the whole overlay if it is scaled. So look for - * those, and make the update area larger if found. - * Also mark the overlay cache dirty */ - for (i = 0; i < num_ovls; ++i) { - unsigned x1, y1, x2, y2; - unsigned outw, outh; + /* + * Execute the outer loop until the inner loop has completed + * once without increasing the update area. This will ensure that + * all scaled overlays end up completely within the update area. + */ + do { + area_changed = false; - oc = &dss_cache.overlay_cache[i]; + /* We need to show the whole overlay if it is scaled. So look + * for those, and make the update area larger if found. + * Also mark the overlay cache dirty */ + for (i = 0; i < num_ovls; ++i) { + unsigned x1, y1, x2, y2; + unsigned outw, outh; - if (oc->channel != mgr->id) - continue; + oc = &dss_cache.overlay_cache[i]; - oc->dirty = true; + if (oc->channel != mgr->id) + continue; - if (!oc->enabled) - continue; + oc->dirty = true; - if (!dispc_is_overlay_scaled(oc)) - continue; + if (!enlarge_update_area) + continue; - outw = oc->out_width == 0 ? oc->width : oc->out_width; - outh = oc->out_height == 0 ? oc->height : oc->out_height; + if (!oc->enabled) + continue; - /* is the overlay outside the update region? */ - if (!rectangle_intersects(x, y, w, h, - oc->pos_x, oc->pos_y, - outw, outh)) - continue; + if (!dispc_is_overlay_scaled(oc)) + continue; - /* if the overlay totally inside the update region? */ - if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh, - x, y, w, h)) - continue; + outw = oc->out_width == 0 ? + oc->width : oc->out_width; + outh = oc->out_height == 0 ? + oc->height : oc->out_height; + + /* is the overlay outside the update region? */ + if (!rectangle_intersects(x, y, w, h, + oc->pos_x, oc->pos_y, + outw, outh)) + continue; - if (x > oc->pos_x) - x1 = oc->pos_x; - else - x1 = x; + /* if the overlay totally inside the update region? */ + if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh, + x, y, w, h)) + continue; - if (y > oc->pos_y) - y1 = oc->pos_y; - else - y1 = y; + if (x > oc->pos_x) + x1 = oc->pos_x; + else + x1 = x; - if ((x + w) < (oc->pos_x + outw)) - x2 = oc->pos_x + outw; - else - x2 = x + w; + if (y > oc->pos_y) + y1 = oc->pos_y; + else + y1 = y; - if ((y + h) < (oc->pos_y + outh)) - y2 = oc->pos_y + outh; - else - y2 = y + h; + if ((x + w) < (oc->pos_x + outw)) + x2 = oc->pos_x + outw; + else + x2 = x + w; - x = x1; - y = y1; - w = x2 - x1; - h = y2 - y1; + if ((y + h) < (oc->pos_y + outh)) + y2 = oc->pos_y + outh; + else + y2 = y + h; - make_even(&x, &w); + x = x1; + y = y1; + w = x2 - x1; + h = y2 - y1; - DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n", + make_even(&x, &w); + + DSSDBG("changing upd area due to ovl(%d) " + "scaling %d,%d %dx%d\n", i, x, y, w, h); - } + + area_changed = true; + } + } while (area_changed); mc = &dss_cache.manager_cache[mgr->id]; mc->do_manual_update = true; + mc->enlarge_update_area = enlarge_update_area; mc->x = x; mc->y = y; mc->w = w; diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c index 82336583adef..244dca81a399 100644 --- a/drivers/video/omap2/dss/overlay.c +++ b/drivers/video/omap2/dss/overlay.c @@ -65,7 +65,7 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { mgr = omap_dss_get_overlay_manager(i); - if (strncmp(buf, mgr->name, len) == 0) + if (sysfs_streq(buf, mgr->name)) break; mgr = NULL; diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index cc23f53cc62d..bbe62464e92d 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -886,7 +886,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev, return -EINVAL; if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { - dss_setup_partial_planes(dssdev, x, y, w, h); + dss_setup_partial_planes(dssdev, x, y, w, h, true); dispc_set_lcd_size(*w, *h); } diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c index 9c7361871d78..6f435450987e 100644 --- a/drivers/video/omap2/omapfb/omapfb-ioctl.c +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -34,12 +34,37 @@ #include "omapfb.h" +static u8 get_mem_idx(struct omapfb_info *ofbi) +{ + if (ofbi->id == ofbi->region->id) + return 0; + + return OMAPFB_MEM_IDX_ENABLED | ofbi->region->id; +} + +static struct omapfb2_mem_region *get_mem_region(struct omapfb_info *ofbi, + u8 mem_idx) +{ + struct omapfb2_device *fbdev = ofbi->fbdev; + + if (mem_idx & OMAPFB_MEM_IDX_ENABLED) + mem_idx &= OMAPFB_MEM_IDX_MASK; + else + mem_idx = ofbi->id; + + if (mem_idx >= fbdev->num_fbs) + return NULL; + + return &fbdev->regions[mem_idx]; +} + static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) { struct omapfb_info *ofbi = FB2OFB(fbi); struct omapfb2_device *fbdev = ofbi->fbdev; struct omap_overlay *ovl; - struct omap_overlay_info info; + struct omap_overlay_info old_info; + struct omapfb2_mem_region *old_rg, *new_rg; int r = 0; DBG("omapfb_setup_plane\n"); @@ -52,36 +77,106 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) /* XXX uses only the first overlay */ ovl = ofbi->overlays[0]; - if (pi->enabled && !ofbi->region.size) { + old_rg = ofbi->region; + new_rg = get_mem_region(ofbi, pi->mem_idx); + if (!new_rg) { + r = -EINVAL; + goto out; + } + + /* Take the locks in a specific order to keep lockdep happy */ + if (old_rg->id < new_rg->id) { + omapfb_get_mem_region(old_rg); + omapfb_get_mem_region(new_rg); + } else if (new_rg->id < old_rg->id) { + omapfb_get_mem_region(new_rg); + omapfb_get_mem_region(old_rg); + } else + omapfb_get_mem_region(old_rg); + + if (pi->enabled && !new_rg->size) { /* * This plane's memory was freed, can't enable it * until it's reallocated. */ r = -EINVAL; - goto out; + goto put_mem; } - ovl->get_overlay_info(ovl, &info); + ovl->get_overlay_info(ovl, &old_info); - info.pos_x = pi->pos_x; - info.pos_y = pi->pos_y; - info.out_width = pi->out_width; - info.out_height = pi->out_height; - info.enabled = pi->enabled; + if (old_rg != new_rg) { + ofbi->region = new_rg; + set_fb_fix(fbi); + } - r = ovl->set_overlay_info(ovl, &info); - if (r) - goto out; + if (pi->enabled) { + struct omap_overlay_info info; - if (ovl->manager) { - r = ovl->manager->apply(ovl->manager); + r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y, + pi->out_width, pi->out_height); if (r) - goto out; + goto undo; + + ovl->get_overlay_info(ovl, &info); + + if (!info.enabled) { + info.enabled = pi->enabled; + r = ovl->set_overlay_info(ovl, &info); + if (r) + goto undo; + } + } else { + struct omap_overlay_info info; + + ovl->get_overlay_info(ovl, &info); + + info.enabled = pi->enabled; + info.pos_x = pi->pos_x; + info.pos_y = pi->pos_y; + info.out_width = pi->out_width; + info.out_height = pi->out_height; + + r = ovl->set_overlay_info(ovl, &info); + if (r) + goto undo; } -out: - if (r) - dev_err(fbdev->dev, "setup_plane failed\n"); + if (ovl->manager) + ovl->manager->apply(ovl->manager); + + /* Release the locks in a specific order to keep lockdep happy */ + if (old_rg->id > new_rg->id) { + omapfb_put_mem_region(old_rg); + omapfb_put_mem_region(new_rg); + } else if (new_rg->id > old_rg->id) { + omapfb_put_mem_region(new_rg); + omapfb_put_mem_region(old_rg); + } else + omapfb_put_mem_region(old_rg); + + return 0; + + undo: + if (old_rg != new_rg) { + ofbi->region = old_rg; + set_fb_fix(fbi); + } + + ovl->set_overlay_info(ovl, &old_info); + put_mem: + /* Release the locks in a specific order to keep lockdep happy */ + if (old_rg->id > new_rg->id) { + omapfb_put_mem_region(old_rg); + omapfb_put_mem_region(new_rg); + } else if (new_rg->id > old_rg->id) { + omapfb_put_mem_region(new_rg); + omapfb_put_mem_region(old_rg); + } else + omapfb_put_mem_region(old_rg); + out: + dev_err(fbdev->dev, "setup_plane failed\n"); + return r; } @@ -92,8 +187,8 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) if (ofbi->num_overlays != 1) { memset(pi, 0, sizeof(*pi)); } else { - struct omap_overlay_info *ovli; struct omap_overlay *ovl; + struct omap_overlay_info *ovli; ovl = ofbi->overlays[0]; ovli = &ovl->info; @@ -103,6 +198,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) pi->enabled = ovli->enabled; pi->channel_out = 0; /* xxx */ pi->mirror = 0; + pi->mem_idx = get_mem_idx(ofbi); pi->out_width = ovli->out_width; pi->out_height = ovli->out_height; } @@ -115,7 +211,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) struct omapfb_info *ofbi = FB2OFB(fbi); struct omapfb2_device *fbdev = ofbi->fbdev; struct omapfb2_mem_region *rg; - int r, i; + int r = 0, i; size_t size; if (mi->type > OMAPFB_MEMTYPE_MAX) @@ -123,22 +219,44 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) size = PAGE_ALIGN(mi->size); - rg = &ofbi->region; + rg = ofbi->region; - for (i = 0; i < ofbi->num_overlays; i++) { - if (ofbi->overlays[i]->info.enabled) - return -EBUSY; + down_write_nested(&rg->lock, rg->id); + atomic_inc(&rg->lock_count); + + if (atomic_read(&rg->map_count)) { + r = -EBUSY; + goto out; + } + + for (i = 0; i < fbdev->num_fbs; i++) { + struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]); + int j; + + if (ofbi2->region != rg) + continue; + + for (j = 0; j < ofbi2->num_overlays; j++) { + if (ofbi2->overlays[j]->info.enabled) { + r = -EBUSY; + goto out; + } + } } if (rg->size != size || rg->type != mi->type) { r = omapfb_realloc_fbmem(fbi, size, mi->type); if (r) { dev_err(fbdev->dev, "realloc fbmem failed\n"); - return r; + goto out; } } - return 0; + out: + atomic_dec(&rg->lock_count); + up_write(&rg->lock); + + return r; } static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) @@ -146,12 +264,14 @@ static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) struct omapfb_info *ofbi = FB2OFB(fbi); struct omapfb2_mem_region *rg; - rg = &ofbi->region; + rg = omapfb_get_mem_region(ofbi->region); memset(mi, 0, sizeof(*mi)); mi->size = rg->size; mi->type = rg->type; + omapfb_put_mem_region(rg); + return 0; } @@ -490,6 +610,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) struct omapfb_vram_info vram_info; struct omapfb_tearsync_info tearsync_info; struct omapfb_display_info display_info; + u32 crt; } p; int r = 0; @@ -648,6 +769,17 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) r = -EFAULT; break; + case FBIO_WAITFORVSYNC: + if (get_user(p.crt, (__u32 __user *)arg)) { + r = -EFAULT; + break; + } + if (p.crt != 0) { + r = -ENODEV; + break; + } + /* FALLTHROUGH */ + case OMAPFB_WAITFORVSYNC: DBG("ioctl WAITFORVSYNC\n"); if (!display) { @@ -738,7 +870,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) break; } - if (!display->driver->enable_te) { + if (!display || !display->driver->enable_te) { r = -ENODEV; break; } diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 4b4506da96da..04034d410d6d 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -157,7 +157,7 @@ static void fill_fb(struct fb_info *fbi) static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot) { - const struct vrfb *vrfb = &ofbi->region.vrfb; + const struct vrfb *vrfb = &ofbi->region->vrfb; unsigned offset; switch (rot) { @@ -185,27 +185,27 @@ static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot) static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot) { if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { - return ofbi->region.vrfb.paddr[rot] + return ofbi->region->vrfb.paddr[rot] + omapfb_get_vrfb_offset(ofbi, rot); } else { - return ofbi->region.paddr; + return ofbi->region->paddr; } } static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi) { if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) - return ofbi->region.vrfb.paddr[0]; + return ofbi->region->vrfb.paddr[0]; else - return ofbi->region.paddr; + return ofbi->region->paddr; } static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi) { if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) - return ofbi->region.vrfb.vaddr[0]; + return ofbi->region->vrfb.vaddr[0]; else - return ofbi->region.vaddr; + return ofbi->region->vaddr; } static struct omapfb_colormode omapfb_colormodes[] = { @@ -450,7 +450,7 @@ static int check_vrfb_fb_size(unsigned long region_size, static int check_fb_size(const struct omapfb_info *ofbi, struct fb_var_screeninfo *var) { - unsigned long max_frame_size = ofbi->region.size; + unsigned long max_frame_size = ofbi->region->size; int bytespp = var->bits_per_pixel >> 3; unsigned long line_size = var->xres_virtual * bytespp; @@ -497,7 +497,7 @@ static int check_fb_size(const struct omapfb_info *ofbi, static int setup_vrfb_rotation(struct fb_info *fbi) { struct omapfb_info *ofbi = FB2OFB(fbi); - struct omapfb2_mem_region *rg = &ofbi->region; + struct omapfb2_mem_region *rg = ofbi->region; struct vrfb *vrfb = &rg->vrfb; struct fb_var_screeninfo *var = &fbi->var; struct fb_fix_screeninfo *fix = &fbi->fix; @@ -558,9 +558,9 @@ static int setup_vrfb_rotation(struct fb_info *fbi) return r; /* used by open/write in fbmem.c */ - fbi->screen_base = ofbi->region.vrfb.vaddr[0]; + fbi->screen_base = ofbi->region->vrfb.vaddr[0]; - fix->smem_start = ofbi->region.vrfb.paddr[0]; + fix->smem_start = ofbi->region->vrfb.paddr[0]; switch (var->nonstd) { case OMAPFB_COLOR_YUV422: @@ -599,7 +599,7 @@ void set_fb_fix(struct fb_info *fbi) struct fb_fix_screeninfo *fix = &fbi->fix; struct fb_var_screeninfo *var = &fbi->var; struct omapfb_info *ofbi = FB2OFB(fbi); - struct omapfb2_mem_region *rg = &ofbi->region; + struct omapfb2_mem_region *rg = ofbi->region; DBG("set_fb_fix\n"); @@ -668,8 +668,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) DBG("check_fb_var %d\n", ofbi->id); - if (ofbi->region.size == 0) - return 0; + WARN_ON(!atomic_read(&ofbi->region->lock_count)); r = fb_mode_to_dss_mode(var, &mode); if (r) { @@ -684,13 +683,14 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) } } - if (var->rotate < 0 || var->rotate > 3) + if (var->rotate > 3) return -EINVAL; if (check_fb_res_bounds(var)) return -EINVAL; - if (check_fb_size(ofbi, var)) + /* When no memory is allocated ignore the size check */ + if (ofbi->region->size != 0 && check_fb_size(ofbi, var)) return -EINVAL; if (var->xres + var->xoffset > var->xres_virtual) @@ -822,9 +822,43 @@ static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var, return offset; } +static void omapfb_calc_addr(const struct omapfb_info *ofbi, + const struct fb_var_screeninfo *var, + const struct fb_fix_screeninfo *fix, + int rotation, u32 *paddr, void __iomem **vaddr) +{ + u32 data_start_p; + void __iomem *data_start_v; + int offset; + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); + data_start_v = NULL; + } else { + data_start_p = omapfb_get_region_paddr(ofbi); + data_start_v = omapfb_get_region_vaddr(ofbi); + } + + if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + offset = calc_rotation_offset_vrfb(var, fix, rotation); + else + offset = calc_rotation_offset_dma(var, fix, rotation); + + data_start_p += offset; + data_start_v += offset; + + if (offset) + DBG("offset %d, %d = %d\n", + var->xoffset, var->yoffset, offset); + + DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v); + + *paddr = data_start_p; + *vaddr = data_start_v; +} /* setup overlay according to the fb */ -static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, +int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, u16 posx, u16 posy, u16 outw, u16 outh) { int r = 0; @@ -832,9 +866,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, struct fb_var_screeninfo *var = &fbi->var; struct fb_fix_screeninfo *fix = &fbi->fix; enum omap_color_mode mode = 0; - int offset; - u32 data_start_p; - void __iomem *data_start_v; + u32 data_start_p = 0; + void __iomem *data_start_v = NULL; struct omap_overlay_info info; int xres, yres; int screen_width; @@ -842,6 +875,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, int rotation = var->rotate; int i; + WARN_ON(!atomic_read(&ofbi->region->lock_count)); + for (i = 0; i < ofbi->num_overlays; i++) { if (ovl != ofbi->overlays[i]) continue; @@ -861,28 +896,9 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, yres = var->yres; } - - if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { - data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation); - data_start_v = NULL; - } else { - data_start_p = omapfb_get_region_paddr(ofbi); - data_start_v = omapfb_get_region_vaddr(ofbi); - } - - if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) - offset = calc_rotation_offset_vrfb(var, fix, rotation); - else - offset = calc_rotation_offset_dma(var, fix, rotation); - - data_start_p += offset; - data_start_v += offset; - - if (offset) - DBG("offset %d, %d = %d\n", - var->xoffset, var->yoffset, offset); - - DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v); + if (ofbi->region->size) + omapfb_calc_addr(ofbi, var, fix, rotation, + &data_start_p, &data_start_v); r = fb_mode_to_dss_mode(var, &mode); if (r) { @@ -954,12 +970,14 @@ int omapfb_apply_changes(struct fb_info *fbi, int init) fill_fb(fbi); #endif + WARN_ON(!atomic_read(&ofbi->region->lock_count)); + for (i = 0; i < ofbi->num_overlays; i++) { ovl = ofbi->overlays[i]; DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); - if (ofbi->region.size == 0) { + if (ofbi->region->size == 0) { /* the fb is not available. disable the overlay */ omapfb_overlay_enable(ovl, 0); if (!init && ovl->manager) @@ -1007,36 +1025,48 @@ err: * DO NOT MODIFY PAR */ static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) { + struct omapfb_info *ofbi = FB2OFB(fbi); int r; DBG("check_var(%d)\n", FB2OFB(fbi)->id); + omapfb_get_mem_region(ofbi->region); + r = check_fb_var(fbi, var); + omapfb_put_mem_region(ofbi->region); + return r; } /* set the video mode according to info->var */ static int omapfb_set_par(struct fb_info *fbi) { + struct omapfb_info *ofbi = FB2OFB(fbi); int r; DBG("set_par(%d)\n", FB2OFB(fbi)->id); + omapfb_get_mem_region(ofbi->region); + set_fb_fix(fbi); r = setup_vrfb_rotation(fbi); if (r) - return r; + goto out; r = omapfb_apply_changes(fbi, 0); + out: + omapfb_put_mem_region(ofbi->region); + return r; } static int omapfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi) { + struct omapfb_info *ofbi = FB2OFB(fbi); struct fb_var_screeninfo new_var; int r; @@ -1052,23 +1082,31 @@ static int omapfb_pan_display(struct fb_var_screeninfo *var, fbi->var = new_var; + omapfb_get_mem_region(ofbi->region); + r = omapfb_apply_changes(fbi, 0); + omapfb_put_mem_region(ofbi->region); + return r; } static void mmap_user_open(struct vm_area_struct *vma) { - struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; + struct omapfb2_mem_region *rg = vma->vm_private_data; - atomic_inc(&ofbi->map_count); + omapfb_get_mem_region(rg); + atomic_inc(&rg->map_count); + omapfb_put_mem_region(rg); } static void mmap_user_close(struct vm_area_struct *vma) { - struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; + struct omapfb2_mem_region *rg = vma->vm_private_data; - atomic_dec(&ofbi->map_count); + omapfb_get_mem_region(rg); + atomic_dec(&rg->map_count); + omapfb_put_mem_region(rg); } static struct vm_operations_struct mmap_user_ops = { @@ -1080,9 +1118,11 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) { struct omapfb_info *ofbi = FB2OFB(fbi); struct fb_fix_screeninfo *fix = &fbi->fix; + struct omapfb2_mem_region *rg; unsigned long off; unsigned long start; u32 len; + int r = -EINVAL; if (vma->vm_end - vma->vm_start == 0) return 0; @@ -1090,12 +1130,14 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) return -EINVAL; off = vma->vm_pgoff << PAGE_SHIFT; + rg = omapfb_get_mem_region(ofbi->region); + start = omapfb_get_region_paddr(ofbi); len = fix->smem_len; if (off >= len) - return -EINVAL; + goto error; if ((vma->vm_end - vma->vm_start + off) > len) - return -EINVAL; + goto error; off += start; @@ -1105,13 +1147,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) vma->vm_flags |= VM_IO | VM_RESERVED; vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); vma->vm_ops = &mmap_user_ops; - vma->vm_private_data = ofbi; + vma->vm_private_data = rg; if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot)) - return -EAGAIN; + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) { + r = -EAGAIN; + goto error; + } + /* vm_ops.open won't be called for mmap itself. */ - atomic_inc(&ofbi->map_count); + atomic_inc(&rg->map_count); + + omapfb_put_mem_region(rg); + return 0; + + error: + omapfb_put_mem_region(ofbi->region); + + return r; } /* Store a single color palette entry into a pseudo palette or the hardware @@ -1154,11 +1208,6 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, if (r != 0) break; - if (regno < 0) { - r = -EINVAL; - break; - } - if (regno < 16) { u16 pal; pal = ((red >> (16 - var->red.length)) << @@ -1217,6 +1266,9 @@ static int omapfb_blank(int blank, struct fb_info *fbi) int do_update = 0; int r = 0; + if (!display) + return -EINVAL; + omapfb_lock(fbdev); switch (blank) { @@ -1300,7 +1352,9 @@ static void omapfb_free_fbmem(struct fb_info *fbi) struct omapfb2_device *fbdev = ofbi->fbdev; struct omapfb2_mem_region *rg; - rg = &ofbi->region; + rg = ofbi->region; + + WARN_ON(atomic_read(&rg->map_count)); if (rg->paddr) if (omap_vram_free(rg->paddr, rg->size)) @@ -1355,8 +1409,15 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, void __iomem *vaddr; int r; - rg = &ofbi->region; - memset(rg, 0, sizeof(*rg)); + rg = ofbi->region; + + rg->paddr = 0; + rg->vaddr = NULL; + memset(&rg->vrfb, 0, sizeof rg->vrfb); + rg->size = 0; + rg->type = 0; + rg->alloc = false; + rg->map = false; size = PAGE_ALIGN(size); @@ -1609,7 +1670,7 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) for (i = 0; i < fbdev->num_fbs; i++) { struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); struct omapfb2_mem_region *rg; - rg = &ofbi->region; + rg = ofbi->region; DBG("region%d phys %08x virt %p size=%lu\n", i, @@ -1626,7 +1687,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) struct omapfb_info *ofbi = FB2OFB(fbi); struct omapfb2_device *fbdev = ofbi->fbdev; struct omap_dss_device *display = fb2display(fbi); - struct omapfb2_mem_region *rg = &ofbi->region; + struct omapfb2_mem_region *rg = ofbi->region; unsigned long old_size = rg->size; unsigned long old_paddr = rg->paddr; int old_type = rg->type; @@ -1709,7 +1770,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) fbi->flags = FBINFO_FLAG_DEFAULT; fbi->pseudo_palette = fbdev->pseudo_palette; - if (ofbi->region.size == 0) { + if (ofbi->region->size == 0) { clear_fb_info(fbi); return 0; } @@ -1871,6 +1932,10 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) ofbi->fbdev = fbdev; ofbi->id = i; + ofbi->region = &fbdev->regions[i]; + ofbi->region->id = i; + init_rwsem(&ofbi->region->lock); + /* assign these early, so that fb alloc can use them */ ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : OMAP_DSS_ROT_DMA; @@ -1900,7 +1965,13 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) /* setup fb_infos */ for (i = 0; i < fbdev->num_fbs; i++) { - r = omapfb_fb_init(fbdev, fbdev->fbs[i]); + struct fb_info *fbi = fbdev->fbs[i]; + struct omapfb_info *ofbi = FB2OFB(fbi); + + omapfb_get_mem_region(ofbi->region); + r = omapfb_fb_init(fbdev, fbi); + omapfb_put_mem_region(ofbi->region); + if (r) { dev_err(fbdev->dev, "failed to setup fb_info\n"); return r; @@ -1921,20 +1992,19 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) DBG("framebuffers registered\n"); for (i = 0; i < fbdev->num_fbs; i++) { - r = omapfb_apply_changes(fbdev->fbs[i], 1); + struct fb_info *fbi = fbdev->fbs[i]; + struct omapfb_info *ofbi = FB2OFB(fbi); + + omapfb_get_mem_region(ofbi->region); + r = omapfb_apply_changes(fbi, 1); + omapfb_put_mem_region(ofbi->region); + if (r) { dev_err(fbdev->dev, "failed to change mode\n"); return r; } } - DBG("create sysfs for fbs\n"); - r = omapfb_create_sysfs(fbdev); - if (r) { - dev_err(fbdev->dev, "failed to create sysfs entries\n"); - return r; - } - /* Enable fb0 */ if (fbdev->num_fbs > 0) { struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); @@ -1968,11 +2038,11 @@ static int omapfb_mode_to_timings(const char *mode_str, #ifdef CONFIG_OMAP2_DSS_VENC if (strcmp(mode_str, "pal") == 0) { *timings = omap_dss_pal_timings; - *bpp = 0; + *bpp = 24; return 0; } else if (strcmp(mode_str, "ntsc") == 0) { *timings = omap_dss_ntsc_timings; - *bpp = 0; + *bpp = 24; return 0; } #endif @@ -2220,6 +2290,13 @@ static int omapfb_probe(struct platform_device *pdev) } } + DBG("create sysfs for fbs\n"); + r = omapfb_create_sysfs(fbdev); + if (r) { + dev_err(fbdev->dev, "failed to create sysfs entries\n"); + goto cleanup; + } + return 0; cleanup: diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c index 5179219128bd..6f9c72cd6bb0 100644 --- a/drivers/video/omap2/omapfb/omapfb-sysfs.c +++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c @@ -49,6 +49,7 @@ static ssize_t store_rotate_type(struct device *dev, { struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_mem_region *rg; enum omap_dss_rotation_type rot_type; int r; @@ -64,9 +65,11 @@ static ssize_t store_rotate_type(struct device *dev, if (rot_type == ofbi->rotation_type) goto out; - if (ofbi->region.size) { + rg = omapfb_get_mem_region(ofbi->region); + + if (rg->size) { r = -EBUSY; - goto out; + goto put_region; } ofbi->rotation_type = rot_type; @@ -75,6 +78,8 @@ static ssize_t store_rotate_type(struct device *dev, * Since the VRAM for this FB is not allocated at the moment we don't * need to do any further parameter checking at this point. */ +put_region: + omapfb_put_mem_region(rg); out: unlock_fb_info(fbi); @@ -97,7 +102,7 @@ static ssize_t store_mirror(struct device *dev, { struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); - bool mirror; + unsigned long mirror; int r; struct fb_var_screeninfo new_var; @@ -111,6 +116,8 @@ static ssize_t store_mirror(struct device *dev, ofbi->mirror = mirror; + omapfb_get_mem_region(ofbi->region); + memcpy(&new_var, &fbi->var, sizeof(new_var)); r = check_fb_var(fbi, &new_var); if (r) @@ -125,6 +132,8 @@ static ssize_t store_mirror(struct device *dev, r = count; out: + omapfb_put_mem_region(ofbi->region); + unlock_fb_info(fbi); return r; @@ -263,11 +272,15 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, DBG("detaching %d\n", ofbi->overlays[i]->id); + omapfb_get_mem_region(ofbi->region); + omapfb_overlay_enable(ovl, 0); if (ovl->manager) ovl->manager->apply(ovl->manager); + omapfb_put_mem_region(ofbi->region); + for (t = i + 1; t < ofbi->num_overlays; t++) { ofbi->rotation[t-1] = ofbi->rotation[t]; ofbi->overlays[t-1] = ofbi->overlays[t]; @@ -300,7 +313,12 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, } if (added) { + omapfb_get_mem_region(ofbi->region); + r = omapfb_apply_changes(fbi, 0); + + omapfb_put_mem_region(ofbi->region); + if (r) goto out; } @@ -388,7 +406,12 @@ static ssize_t store_overlays_rotate(struct device *dev, for (i = 0; i < num_ovls; ++i) ofbi->rotation[i] = rotation[i]; + omapfb_get_mem_region(ofbi->region); + r = omapfb_apply_changes(fbi, 0); + + omapfb_put_mem_region(ofbi->region); + if (r) goto out; @@ -408,7 +431,7 @@ static ssize_t show_size(struct device *dev, struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); - return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size); + return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region->size); } static ssize_t store_size(struct device *dev, struct device_attribute *attr, @@ -416,6 +439,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr, { struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); + struct omapfb2_device *fbdev = ofbi->fbdev; + struct omapfb2_mem_region *rg; unsigned long size; int r; int i; @@ -425,15 +450,33 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr, if (!lock_fb_info(fbi)) return -ENODEV; - for (i = 0; i < ofbi->num_overlays; i++) { - if (ofbi->overlays[i]->info.enabled) { - r = -EBUSY; - goto out; + rg = ofbi->region; + + down_write_nested(&rg->lock, rg->id); + atomic_inc(&rg->lock_count); + + if (atomic_read(&rg->map_count)) { + r = -EBUSY; + goto out; + } + + for (i = 0; i < fbdev->num_fbs; i++) { + struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]); + int j; + + if (ofbi2->region != rg) + continue; + + for (j = 0; j < ofbi2->num_overlays; j++) { + if (ofbi2->overlays[j]->info.enabled) { + r = -EBUSY; + goto out; + } } } - if (size != ofbi->region.size) { - r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type); + if (size != ofbi->region->size) { + r = omapfb_realloc_fbmem(fbi, size, ofbi->region->type); if (r) { dev_err(dev, "realloc fbmem failed\n"); goto out; @@ -442,6 +485,9 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr, r = count; out: + atomic_dec(&rg->lock_count); + up_write(&rg->lock); + unlock_fb_info(fbi); return r; @@ -453,7 +499,7 @@ static ssize_t show_phys(struct device *dev, struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); - return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr); + return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region->paddr); } static ssize_t show_virt(struct device *dev, @@ -462,7 +508,7 @@ static ssize_t show_virt(struct device *dev, struct fb_info *fbi = dev_get_drvdata(dev); struct omapfb_info *ofbi = FB2OFB(fbi); - return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr); + return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region->vaddr); } static struct device_attribute omapfb_attrs[] = { diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h index cd54fdbfd8bb..1305fc9880ba 100644 --- a/drivers/video/omap2/omapfb/omapfb.h +++ b/drivers/video/omap2/omapfb/omapfb.h @@ -27,6 +27,8 @@ #define DEBUG #endif +#include <linux/rwsem.h> + #include <plat/display.h> #ifdef DEBUG @@ -44,6 +46,7 @@ extern unsigned int omapfb_debug; #define OMAPFB_MAX_OVL_PER_FB 3 struct omapfb2_mem_region { + int id; u32 paddr; void __iomem *vaddr; struct vrfb vrfb; @@ -51,13 +54,15 @@ struct omapfb2_mem_region { u8 type; /* OMAPFB_PLANE_MEM_* */ bool alloc; /* allocated by the driver */ bool map; /* kernel mapped by the driver */ + atomic_t map_count; + struct rw_semaphore lock; + atomic_t lock_count; }; /* appended to fb_info */ struct omapfb_info { int id; - struct omapfb2_mem_region region; - atomic_t map_count; + struct omapfb2_mem_region *region; int num_overlays; struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; struct omapfb2_device *fbdev; @@ -76,6 +81,7 @@ struct omapfb2_device { unsigned num_fbs; struct fb_info *fbs[10]; + struct omapfb2_mem_region regions[10]; unsigned num_displays; struct omap_dss_device *displays[10]; @@ -117,6 +123,9 @@ int omapfb_update_window(struct fb_info *fbi, int dss_mode_to_fb_mode(enum omap_color_mode dssmode, struct fb_var_screeninfo *var); +int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + u16 posx, u16 posy, u16 outw, u16 outh); + /* find the display connected to this fb, if any */ static inline struct omap_dss_device *fb2display(struct fb_info *fbi) { @@ -148,8 +157,24 @@ static inline int omapfb_overlay_enable(struct omap_overlay *ovl, struct omap_overlay_info info; ovl->get_overlay_info(ovl, &info); + if (info.enabled == enable) + return 0; info.enabled = enable; return ovl->set_overlay_info(ovl, &info); } +static inline struct omapfb2_mem_region * +omapfb_get_mem_region(struct omapfb2_mem_region *rg) +{ + down_read_nested(&rg->lock, rg->id); + atomic_inc(&rg->lock_count); + return rg; +} + +static inline void omapfb_put_mem_region(struct omapfb2_mem_region *rg) +{ + atomic_dec(&rg->lock_count); + up_read(&rg->lock); +} + #endif diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 7e4cd616bcb5..c0b018790f07 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -85,6 +85,9 @@ #define OMAPFB_MEMTYPE_SRAM 1 #define OMAPFB_MEMTYPE_MAX 1 +#define OMAPFB_MEM_IDX_ENABLED 0x80 +#define OMAPFB_MEM_IDX_MASK 0x7f + enum omapfb_color_format { OMAPFB_COLOR_RGB565 = 0, OMAPFB_COLOR_YUV422, @@ -136,7 +139,7 @@ struct omapfb_plane_info { __u8 enabled; __u8 channel_out; __u8 mirror; - __u8 reserved1; + __u8 mem_idx; __u32 out_width; __u32 out_height; __u32 reserved2[12]; |