diff options
| -rw-r--r-- | drivers/input/misc/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/misc/dm355evm_keys.c | 329 |
3 files changed, 339 insertions, 0 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 6cff5acfa85a..4399f54c043c 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -260,4 +260,13 @@ config INPUT_RB532_BUTTON To compile this driver as a module, choose M here: the module will be called rb532_button. +config INPUT_DM355EVM + tristate "TI DaVinci DM355 EVM Keypad and IR Remote" + depends on MFD_DM355EVM_MSP + help + Supports the pushbuttons and IR remote used with + the DM355 EVM board. + + To compile this driver as a module, choose M here: the + module will be called dm355evm_keys. endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index c7e444912d74..0d979fd4cd57 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o +obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c new file mode 100644 index 000000000000..a63315ce4a6c --- /dev/null +++ b/drivers/input/misc/dm355evm_keys.c @@ -0,0 +1,329 @@ +/* + * dm355evm_keys.c - support buttons and IR remote on DM355 EVM board + * + * Copyright (c) 2008 by David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> + +#include <linux/i2c/dm355evm_msp.h> + + +/* + * The MSP430 firmware on the DM355 EVM monitors on-board pushbuttons + * and an IR receptor used for the remote control. When any key is + * pressed, or its autorepeat kicks in, an event is sent. This driver + * read those events from the small (32 event) queue and reports them. + * + * Because we communicate with the MSP430 using I2C, and all I2C calls + * in Linux sleep, we need to cons up a kind of threaded IRQ handler + * using a work_struct. The IRQ is active low, but we use it through + * the GPIO controller so we can trigger on falling edges. + * + * Note that physically there can only be one of these devices. + * + * This driver was tested with firmware revision A4. + */ +struct dm355evm_keys { + struct work_struct work; + struct input_dev *input; + struct device *dev; + int irq; +}; + +static irqreturn_t dm355evm_keys_irq(int irq, void *_keys) +{ + struct dm355evm_keys *keys = _keys; + + schedule_work(&keys->work); + return IRQ_HANDLED; +} + +/* These initial keycodes can be remapped by dm355evm_setkeycode(). */ +static struct { + u16 event; + u16 keycode; +} dm355evm_keys[] = { + + /* + * Pushbuttons on the EVM board ... note that the labels for these + * are SW10/SW11/etc on the PC board. The left/right orientation + * comes only from the firmware's documentation, and presumes the + * power connector is immediately in front of you and the IR sensor + * is to the right. (That is, rotate the board counter-clockwise + * by 90 degrees from the SW10/etc and "DM355 EVM" labels.) + */ + { 0x00d8, KEY_OK, }, /* SW12 */ + { 0x00b8, KEY_UP, }, /* SW13 */ + { 0x00e8, KEY_DOWN, }, /* SW11 */ + { 0x0078, KEY_LEFT, }, /* SW14 */ + { 0x00f0, KEY_RIGHT, }, /* SW10 */ + + /* + * IR buttons ... codes assigned to match the universal remote + * provided with the EVM (Philips PM4S) using DVD code 0020. + * + * These event codes match firmware documentation, but other + * remote controls could easily send more RC5-encoded events. + * The PM4S manual was used in several cases to help select + * a keycode reflecting the intended usage. + * + * RC5 codes are 14 bits, with two start bits (0x3 prefix) + * and a toggle bit (masked out below). + */ + { 0x300c, KEY_POWER, }, /* NOTE: docs omit this */ + { 0x3000, KEY_NUMERIC_0, }, + { 0x3001, KEY_NUMERIC_1, }, + { 0x3002, KEY_NUMERIC_2, }, + { 0x3003, KEY_NUMERIC_3, }, + { 0x3004, KEY_NUMERIC_4, }, + { 0x3005, KEY_NUMERIC_5, }, + { 0x3006, KEY_NUMERIC_6, }, + { 0x3007, KEY_NUMERIC_7, }, + { 0x3008, KEY_NUMERIC_8, }, + { 0x3009, KEY_NUMERIC_9, }, + { 0x3022, KEY_ENTER, }, + { 0x30ec, KEY_MODE, }, /* "tv/vcr/..." */ + { 0x300f, KEY_SELECT, }, /* "info" */ + { 0x3020, KEY_CHANNELUP, }, /* "up" */ + { 0x302e, KEY_MENU, }, /* "in/out" */ + { 0x3011, KEY_VOLUMEDOWN, }, /* "left" */ + { 0x300d, KEY_MUTE, }, /* "ok" */ + { 0x3010, KEY_VOLUMEUP, }, /* "right" */ + { 0x301e, KEY_SUBTITLE, }, /* "cc" */ + { 0x3021, KEY_CHANNELDOWN, }, /* "down" */ + { 0x3022, KEY_PREVIOUS, }, + { 0x3026, KEY_SLEEP, }, + { 0x3172, KEY_REWIND, }, /* NOTE: docs wrongly say 0x30ca */ + { 0x3175, KEY_PLAY, }, + { 0x3174, KEY_FASTFORWARD, }, + { 0x3177, KEY_RECORD, }, + { 0x3176, KEY_STOP, }, + { 0x3169, KEY_PAUSE, }, +}; + +static void dm355evm_keys_work(struct work_struct *work) +{ + struct dm355evm_keys *keys; + int status; + + keys = container_of(work, struct dm355evm_keys, work); + + /* For simplicity we ignore INPUT_COUNT and just read + * events until we get the "queue empty" indicator. + * Reading INPUT_LOW decrements the count. + */ + for (;;) { + static u16 last_event; + u16 event; + int keycode; + int i; + + status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH); + if (status < 0) { + dev_dbg(keys->dev, "input high err %d\n", + status); + break; + } + event = status << 8; + + status = dm355evm_msp_read(DM355EVM_MSP_INPUT_LOW); + if (status < 0) { + dev_dbg(keys->dev, "input low err %d\n", + status); + break; + } + event |= status; + if (event == 0xdead) + break; + + /* Press and release a button: two events, same code. + * Press and hold (autorepeat), then release: N events + * (N > 2), same code. For RC5 buttons the toggle bits + * distinguish (for example) "1-autorepeat" from "1 1"; + * but PCB buttons don't support that bit. + * + * So we must synthesize release events. We do that by + * mapping events to a press/release event pair; then + * to avoid adding extra events, skip the second event + * of each pair. + */ + if (event == last_event) { + last_event = 0; + continue; + } + last_event = event; + + /* ignore the RC5 toggle bit */ + event &= ~0x0800; + + /* find the key, or leave it as unknown */ + keycode = KEY_UNKNOWN; + for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) { + if (dm355evm_keys[i].event != event) + continue; + keycode = dm355evm_keys[i].keycode; + break; + } + dev_dbg(keys->dev, + "input event 0x%04x--> keycode %d\n", + event, keycode); + + /* report press + release */ + input_report_key(keys->input, keycode, 1); + input_sync(keys->input); + input_report_key(keys->input, keycode, 0); + input_sync(keys->input); + } +} + +static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode) +{ + u16 old_keycode; + unsigned i; + + if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys)) + return -EINVAL; + + old_keycode = dm355evm_keys[index].keycode; + dm355evm_keys[index].keycode = keycode; + set_bit(keycode, dev->keybit); + + for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) { + if (dm355evm_keys[index].keycode == old_keycode) + goto done; + } + clear_bit(old_keycode, dev->keybit); +done: + return 0; +} + +static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode) +{ + if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys)) + return -EINVAL; + + return dm355evm_keys[index].keycode; +} + +/*----------------------------------------------------------------------*/ + +static int __devinit dm355evm_keys_probe(struct platform_device *pdev) +{ + struct dm355evm_keys *keys; + struct input_dev *input; + int status; + int i; + + /* allocate instance struct and input dev */ + keys = kzalloc(sizeof *keys, GFP_KERNEL); + input = input_allocate_device(); + if (!keys || !input) { + status = -ENOMEM; + goto fail1; + } + + keys->dev = &pdev->dev; + keys->input = input; + INIT_WORK(&keys->work, dm355evm_keys_work); + + /* set up "threaded IRQ handler" */ + status = platform_get_irq(pdev, 0); + if (status < 0) + goto fail1; + keys->irq = status; + + input_set_drvdata(input, keys); + + input->name = "DM355 EVM Controls"; + input->phys = "dm355evm/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_I2C; + input->id.product = 0x0355; + input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV); + + input->evbit[0] = BIT(EV_KEY); + for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) + __set_bit(dm355evm_keys[i].keycode, input->keybit); + + input->setkeycode = dm355evm_setkeycode; + input->getkeycode = dm355evm_getkeycode; + + /* REVISIT: flush the event queue? */ + + status = request_irq(keys->irq, dm355evm_keys_irq, + IRQF_TRIGGER_FALLING, + dev_name(&pdev->dev), keys); + if (status < 0) + goto fail1; + + /* register */ + status = input_register_device(input); + if (status < 0) + goto fail2; + + platform_set_drvdata(pdev, keys); + + return 0; + +fail2: + free_irq(keys->irq, keys); +fail1: + input_free_device(input); + kfree(keys); + dev_err(&pdev->dev, "can't register, err %d\n", status); + + return status; +} + +static int __devexit dm355evm_keys_remove(struct platform_device *pdev) +{ + struct dm355evm_keys *keys = platform_get_drvdata(pdev); + + free_irq(keys->irq, keys); + input_unregister_device(keys->input); + kfree(keys); + + return 0; +} + +/* REVISIT: add suspend/resume when DaVinci supports it. The IRQ should + * be able to wake up the system. When device_may_wakeup(&pdev->dev), call + * enable_irq_wake() on suspend, and disable_irq_wake() on resume. + */ + +/* + * I2C is used to talk to the MSP430, but this platform device is + * exposed by an MFD driver that manages I2C communications. + */ +static struct platform_driver dm355evm_keys_driver = { + .probe = dm355evm_keys_probe, + .remove = __devexit_p(dm355evm_keys_remove), + .driver = { + .owner = THIS_MODULE, + .name = "dm355evm_keys", + }, +}; + +static int __init dm355evm_keys_init(void) +{ + return platform_driver_register(&dm355evm_keys_driver); +} +module_init(dm355evm_keys_init); + +static void __exit dm355evm_keys_exit(void) +{ + platform_driver_unregister(&dm355evm_keys_driver); +} +module_exit(dm355evm_keys_exit); + +MODULE_LICENSE("GPL"); |