diff options
26 files changed, 2403 insertions, 381 deletions
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt index a4fa4efa1d83..7a802f64e5bd 100644 --- a/Documentation/devicetree/bindings/dma/mmp-dma.txt +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -1,17 +1,20 @@ * MARVELL MMP DMA controller Marvell Peripheral DMA Controller -Used platfroms: pxa688, pxa910, pxa3xx, etc +Used platforms: pxa688, pxa910, pxa3xx, etc Required properties: - compatible: Should be "marvell,pdma-1.0" - reg: Should contain DMA registers location and length. - interrupts: Either contain all of the per-channel DMA interrupts or one irq for pdma device -- #dma-channels: Number of DMA channels supported by the controller. + +Optional properties: +- #dma-channels: Number of DMA channels supported by the controller (defaults + to 32 when not specified) "marvell,pdma-1.0" -Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. +Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. Examples: @@ -45,7 +48,7 @@ pdma: dma-controller@d4000000 { Marvell Two Channel DMA Controller used specifically for audio -Used platfroms: pxa688, pxa910 +Used platforms: pxa688, pxa910 Required properties: - compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt new file mode 100644 index 000000000000..1405ed071bb4 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -0,0 +1,75 @@ +Xilinx AXI VDMA engine, it does transfers between memory and video devices. +It can be configured to have one channel or two channels. If configured +as two channels, one is to transmit to the video device and another is +to receive from the video device. + +Required properties: +- compatible: Should be "xlnx,axi-vdma-1.00.a" +- #dma-cells: Should be <1>, see "dmas" property below +- reg: Should contain VDMA registers location and length. +- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. +- dma-channel child node: Should have at least one channel and can have up to + two channels per device. This node specifies the properties of each + DMA channel (see child node properties below). + +Optional properties: +- xlnx,include-sg: Tells configured for Scatter-mode in + the hardware. +- xlnx,flush-fsync: Tells which channel to Flush on Frame sync. + It takes following values: + {1}, flush both channels + {2}, flush mm2s channel + {3}, flush s2mm channel + +Required child node properties: +- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or + "xlnx,axi-vdma-s2mm-channel". +- interrupts: Should contain per channel VDMA interrupts. +- xlnx,data-width: Should contain the stream data width, take values + {32,64...1024}. + +Optional child node properties: +- xlnx,include-dre: Tells hardware is configured for Data + Realignment Engine. +- xlnx,genlock-mode: Tells Genlock synchronization is + enabled/disabled in hardware. + +Example: +++++++++ + +axi_vdma_0: axivdma@40030000 { + compatible = "xlnx,axi-vdma-1.00.a"; + #dma_cells = <1>; + reg = < 0x40030000 0x10000 >; + xlnx,num-fstores = <0x8>; + xlnx,flush-fsync = <0x1>; + dma-channel@40030000 { + compatible = "xlnx,axi-vdma-mm2s-channel"; + interrupts = < 0 54 4 >; + xlnx,datawidth = <0x40>; + } ; + dma-channel@40030030 { + compatible = "xlnx,axi-vdma-s2mm-channel"; + interrupts = < 0 53 4 >; + xlnx,datawidth = <0x40>; + } ; +} ; + + +* DMA client + +Required properties: +- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs, + where Channel ID is '0' for write/tx and '1' for read/rx + channel. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: +++++++++ + +vdmatest_0: vdmatest@0 { + compatible ="xlnx,axi-vdma-test-1.00.a"; + dmas = <&axi_vdma_0 0 + &axi_vdma_0 1>; + dma-names = "vdma0", "vdma1"; +} ; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts index 651e4f55acdb..57f86cdf9f36 100644 --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -296,7 +296,7 @@ }; dma@2c000 { - compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + compatible = "fsl,mpc8308-dma"; reg = <0x2c000 0x1800>; interrupts = <3 0x8 94 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index 9ce45f2efd34..d0211f0413c6 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -265,7 +265,7 @@ }; dma@2c000 { - compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + compatible = "fsl,mpc8308-dma"; reg = <0x2c000 0x1800>; interrupts = <3 0x8 94 0x8>; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 5c5863842de9..1eca7b9760e6 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -234,7 +234,7 @@ config PL330_DMA config PCH_DMA tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA" - depends on PCI && X86 + depends on PCI && (X86_32 || COMPILE_TEST) select DMA_ENGINE help Enable support for Intel EG20T PCH DMA engine. @@ -269,7 +269,7 @@ config MXS_DMA select DMA_ENGINE help Support the MXS DMA engine. This engine including APBH-DMA - and APBX-DMA is integrated into Freescale i.MX23/28 chips. + and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips. config EP93XX_DMA bool "Cirrus Logic EP93xx DMA support" @@ -361,6 +361,20 @@ config FSL_EDMA multiplexing capability for DMA request sources(slot). This module can be found on Freescale Vybrid and LS-1 SoCs. +config XILINX_VDMA + tristate "Xilinx AXI VDMA Engine" + depends on (ARCH_ZYNQ || MICROBLAZE) + select DMA_ENGINE + help + Enable support for Xilinx AXI VDMA Soft IP. + + This engine provides high-bandwidth direct memory access + between memory and AXI4-Stream video type target + peripherals including peripherals which support AXI4- + Stream Video Protocol. It has two stream interfaces/ + channels, Memory Mapped to Stream (MM2S) and Stream to + Memory Mapped (S2MM) for the data transfers. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 5150c82c9caf..c779e1eb2db2 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -46,3 +46,4 @@ obj-$(CONFIG_K3_DMA) += k3dma.o obj-$(CONFIG_MOXART_DMA) += moxart-dma.o obj-$(CONFIG_FSL_EDMA) += fsl-edma.o obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o +obj-y += xilinx/ diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 7a740769c2fa..a27ded53ab4f 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -1493,6 +1493,13 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) dw->regs = chip->regs; chip->dw = dw; + dw->clk = devm_clk_get(chip->dev, "hclk"); + if (IS_ERR(dw->clk)) + return PTR_ERR(dw->clk); + err = clk_prepare_enable(dw->clk); + if (err) + return err; + dw_params = dma_read_byaddr(chip->regs, DW_PARAMS); autocfg = dw_params >> DW_PARAMS_EN & 0x1; @@ -1500,15 +1507,19 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) if (!pdata && autocfg) { pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; + if (!pdata) { + err = -ENOMEM; + goto err_pdata; + } /* Fill platform data with the default values */ pdata->is_private = true; pdata->chan_allocation_order = CHAN_ALLOCATION_ASCENDING; pdata->chan_priority = CHAN_PRIORITY_ASCENDING; - } else if (!pdata || pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) - return -EINVAL; + } else if (!pdata || pdata->nr_channels > DW_DMA_MAX_NR_CHANNELS) { + err = -EINVAL; + goto err_pdata; + } if (autocfg) nr_channels = (dw_params >> DW_PARAMS_NR_CHAN & 0x7) + 1; @@ -1517,13 +1528,10 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) dw->chan = devm_kcalloc(chip->dev, nr_channels, sizeof(*dw->chan), GFP_KERNEL); - if (!dw->chan) - return -ENOMEM; - - dw->clk = devm_clk_get(chip->dev, "hclk"); - if (IS_ERR(dw->clk)) - return PTR_ERR(dw->clk); - clk_prepare_enable(dw->clk); + if (!dw->chan) { + err = -ENOMEM; + goto err_pdata; + } /* Get hardware configuration parameters */ if (autocfg) { @@ -1553,7 +1561,8 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) sizeof(struct dw_desc), 4, 0); if (!dw->desc_pool) { dev_err(chip->dev, "No memory for descriptors dma pool\n"); - return -ENOMEM; + err = -ENOMEM; + goto err_pdata; } tasklet_init(&dw->tasklet, dw_dma_tasklet, (unsigned long)dw); @@ -1561,7 +1570,7 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) err = request_irq(chip->irq, dw_dma_interrupt, IRQF_SHARED, "dw_dmac", dw); if (err) - return err; + goto err_pdata; INIT_LIST_HEAD(&dw->dma.channels); for (i = 0; i < nr_channels; i++) { @@ -1650,12 +1659,20 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) dma_writel(dw, CFG, DW_CFG_DMA_EN); + err = dma_async_device_register(&dw->dma); + if (err) + goto err_dma_register; + dev_info(chip->dev, "DesignWare DMA Controller, %d channels\n", nr_channels); - dma_async_device_register(&dw->dma); - return 0; + +err_dma_register: + free_irq(chip->irq, dw); +err_pdata: + clk_disable_unprepare(dw->clk); + return err; } EXPORT_SYMBOL_GPL(dw_dma_probe); @@ -1676,6 +1693,8 @@ int dw_dma_remove(struct dw_dma_chip *chip) channel_clear_bit(dw, CH_EN, dwc->mask); } + clk_disable_unprepare(dw->clk); + return 0; } EXPORT_SYMBOL_GPL(dw_dma_remove); diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index fec59f1a77bb..39e30c3c7a9d 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -93,19 +93,13 @@ static int dw_pci_resume_early(struct device *dev) return dw_dma_resume(chip); }; -#else /* !CONFIG_PM_SLEEP */ - -#define dw_pci_suspend_late NULL -#define dw_pci_resume_early NULL - -#endif /* !CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops dw_pci_dev_pm_ops = { - .suspend_late = dw_pci_suspend_late, - .resume_early = dw_pci_resume_early, + SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_pci_suspend_late, dw_pci_resume_early) }; -static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = { +static const struct pci_device_id dw_pci_id_table[] = { /* Medfield */ { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata }, { PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata }, diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index 453822cc4f9d..c5b339af6be5 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -256,7 +256,7 @@ MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); #ifdef CONFIG_PM_SLEEP -static int dw_suspend_noirq(struct device *dev) +static int dw_suspend_late(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct dw_dma_chip *chip = platform_get_drvdata(pdev); @@ -264,7 +264,7 @@ static int dw_suspend_noirq(struct device *dev) return dw_dma_suspend(chip); } -static int dw_resume_noirq(struct device *dev) +static int dw_resume_early(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct dw_dma_chip *chip = platform_get_drvdata(pdev); @@ -272,20 +272,10 @@ static int dw_resume_noirq(struct device *dev) return dw_dma_resume(chip); } -#else /* !CONFIG_PM_SLEEP */ - -#define dw_suspend_noirq NULL -#define dw_resume_noirq NULL - -#endif /* !CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops dw_dev_pm_ops = { - .suspend_noirq = dw_suspend_noirq, - .resume_noirq = dw_resume_noirq, - .freeze_noirq = dw_suspend_noirq, - .thaw_noirq = dw_resume_noirq, - .restore_noirq = dw_resume_noirq, - .poweroff_noirq = dw_suspend_noirq, + SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early) }; static struct platform_driver dw_driver = { diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index f157c6f76b32..e0fec68aed25 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -61,6 +61,16 @@ static u32 get_sr(struct fsldma_chan *chan) return DMA_IN(chan, &chan->regs->sr, 32); } +static void set_mr(struct fsldma_chan *chan, u32 val) +{ + DMA_OUT(chan, &chan->regs->mr, val, 32); +} + +static u32 get_mr(struct fsldma_chan *chan) +{ + return DMA_IN(chan, &chan->regs->mr, 32); +} + static void set_cdar(struct fsldma_chan *chan, dma_addr_t addr) { DMA_OUT(chan, &chan->regs->cdar, addr | FSL_DMA_SNEN, 64); @@ -71,6 +81,11 @@ static dma_addr_t get_cdar(struct fsldma_chan *chan) return DMA_IN(chan, &chan->regs->cdar, 64) & ~FSL_DMA_SNEN; } +static void set_bcr(struct fsldma_chan *chan, u32 val) +{ + DMA_OUT(chan, &chan->regs->bcr, val, 32); +} + static u32 get_bcr(struct fsldma_chan *chan) { return DMA_IN(chan, &chan->regs->bcr, 32); @@ -135,7 +150,7 @@ static void set_ld_eol(struct fsldma_chan *chan, struct fsl_desc_sw *desc) static void dma_init(struct fsldma_chan *chan) { /* Reset the channel */ - DMA_OUT(chan, &chan->regs->mr, 0, 32); + set_mr(chan, 0); switch (chan->feature & FSL_DMA_IP_MASK) { case FSL_DMA_IP_85XX: @@ -144,16 +159,15 @@ static void dma_init(struct fsldma_chan *chan) * EOLNIE - End of links interrupt enable * BWC - Bandwidth sharing among channels */ - DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_BWC - | FSL_DMA_MR_EIE | FSL_DMA_MR_EOLNIE, 32); + set_mr(chan, FSL_DMA_MR_BWC | FSL_DMA_MR_EIE + | FSL_DMA_MR_EOLNIE); break; case FSL_DMA_IP_83XX: /* Set the channel to below modes: * EOTIE - End-of-transfer interrupt enable * PRC_RM - PCI read multiple */ - DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_EOTIE - | FSL_DMA_MR_PRC_RM, 32); + set_mr(chan, FSL_DMA_MR_EOTIE | FSL_DMA_MR_PRC_RM); break; } } @@ -175,10 +189,10 @@ static void dma_start(struct fsldma_chan *chan) { u32 mode; - mode = DMA_IN(chan, &chan->regs->mr, 32); + mode = get_mr(chan); if (chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { - DMA_OUT(chan, &chan->regs->bcr, 0, 32); + set_bcr(chan, 0); mode |= FSL_DMA_MR_EMP_EN; } else { mode &= ~FSL_DMA_MR_EMP_EN; @@ -191,7 +205,7 @@ static void dma_start(struct fsldma_chan *chan) mode |= FSL_DMA_MR_CS; } - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); } static void dma_halt(struct fsldma_chan *chan) @@ -200,7 +214,7 @@ static void dma_halt(struct fsldma_chan *chan) int i; /* read the mode register */ - mode = DMA_IN(chan, &chan->regs->mr, 32); + mode = get_mr(chan); /* * The 85xx controller supports channel abort, which will stop @@ -209,14 +223,14 @@ static void dma_halt(struct fsldma_chan *chan) */ if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { mode |= FSL_DMA_MR_CA; - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); mode &= ~FSL_DMA_MR_CA; } /* stop the DMA controller */ mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN); - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); /* wait for the DMA controller to become idle */ for (i = 0; i < 100; i++) { @@ -245,7 +259,7 @@ static void fsl_chan_set_src_loop_size(struct fsldma_chan *chan, int size) { u32 mode; - mode = DMA_IN(chan, &chan->regs->mr, 32); + mode = get_mr(chan); switch (size) { case 0: @@ -259,7 +273,7 @@ static void fsl_chan_set_src_loop_size(struct fsldma_chan *chan, int size) break; } - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); } /** @@ -277,7 +291,7 @@ static void fsl_chan_set_dst_loop_size(struct fsldma_chan *chan, int size) { u32 mode; - mode = DMA_IN(chan, &chan->regs->mr, 32); + mode = get_mr(chan); switch (size) { case 0: @@ -291,7 +305,7 @@ static void fsl_chan_set_dst_loop_size(struct fsldma_chan *chan, int size) break; } - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); } /** @@ -312,10 +326,10 @@ static void fsl_chan_set_request_count(struct fsldma_chan *chan, int size) BUG_ON(size > 1024); - mode = DMA_IN(chan, &chan->regs->mr, 32); + mode = get_mr(chan); mode |= (__ilog2(size) << 24) & 0x0f000000; - DMA_OUT(chan, &chan->regs->mr, mode, 32); + set_mr(chan, mode); } /** @@ -404,6 +418,19 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) } /** + * fsl_dma_free_descriptor - Free descriptor from channel's DMA pool. + * @chan : Freescale DMA channel + * @desc: descriptor to be freed + */ +static void fsl_dma_free_descriptor(struct fsldma_chan *chan, + struct fsl_desc_sw *desc) +{ + list_del(&desc->node); + chan_dbg(chan, "LD %p free\n", desc); + dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys); +} + +/** * fsl_dma_alloc_descriptor - Allocate descriptor from channel's DMA pool. * @chan : Freescale DMA channel * @@ -426,14 +453,107 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan) desc->async_tx.tx_submit = fsl_dma_tx_submit; desc->async_tx.phys = pdesc; -#ifdef FSL_DMA_LD_DEBUG chan_dbg(chan, "LD %p allocated\n", desc); -#endif return desc; } /** + * fsl_chan_xfer_ld_queue - transfer any pending transactions + * @chan : Freescale DMA channel + * + * HARDWARE STATE: idle + * LOCKING: must hold chan->desc_lock + */ +static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan) +{ + struct fsl_desc_sw *desc; + + /* + * If the list of pending descriptors is empty, then we + * don't need to do any work at all + */ + if (list_empty(&chan->ld_pending)) { + chan_dbg(chan, "no pending LDs\n"); + return; + } + + /* + * The DMA controller is not idle, which means that the interrupt + * handler will start any queued transactions when it runs after + * this transaction finishes + */ + if (!chan->idle) { + chan_dbg(chan, "DMA controller still busy\n"); + return; + } + + /* + * If there are some link descriptors which have not been + * transferred, we need to start the controller + */ + + /* + * Move all elements from the queue of pending transactions + * onto the list of running transactions + */ + chan_dbg(chan, "idle, starting controller\n"); + desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node); + list_splice_tail_init(&chan->ld_pending, &chan->ld_running); + + /* + * The 85xx DMA controller doesn't clear the channel start bit + * automatically at the end of a transfer. Therefore we must clear + * it in software before starting the transfer. + */ + if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { + u32 mode; + + mode = get_mr(chan); + mode &= ~FSL_DMA_MR_CS; + set_mr(chan, mode); + } + + /* + * Program the descriptor's address into the DMA controller, + * then start the DMA transaction + */ + set_cdar(chan, desc->async_tx.phys); + get_cdar(chan); + + dma_start(chan); + chan->idle = false; +} + +/** + * fsldma_cleanup_descriptor - cleanup and free a single link descriptor + * @chan: Freescale DMA channel + * @desc: descriptor to cleanup and free + * + * This function is used on a descriptor which has been executed by the DMA + * controller. It will run any callbacks, submit any dependencies, and then + * free the descriptor. + */ +static void fsldma_cleanup_descriptor(struct fsldma_chan *chan, + struct fsl_desc_sw *desc) +{ + struct dma_async_tx_descriptor *txd = &desc->async_tx; + + /* Run the link descriptor callback function */ + if (txd->callback) { + chan_dbg(chan, "LD %p callback\n", desc); + txd->callback(txd->callback_param); + } + + /* Run any dependencies */ + dma_run_dependencies(txd); + + dma_descriptor_unmap(txd); + chan_dbg(chan, "LD %p free\n", desc); + dma_pool_free(chan->desc_pool, desc, txd->phys); +} + +/** * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel. * @chan : Freescale DMA channel * @@ -477,13 +597,8 @@ static void fsldma_free_desc_list(struct fsldma_chan *chan, { struct fsl_desc_sw *desc, *_desc; - list_for_each_entry_safe(desc, _desc, list, node) { - list_del(&desc->node); -#ifdef FSL_DMA_LD_DEBUG - chan_dbg(chan, "LD %p free\n", desc); -#endif - dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys); - } + list_for_each_entry_safe(desc, _desc, list, node) + fsl_dma_free_descriptor(chan, desc); } static void fsldma_free_desc_list_reverse(struct fsldma_chan *chan, @@ -491,13 +606,8 @@ static void fsldma_free_desc_list_reverse(struct fsldma_chan *chan, { struct fsl_desc_sw *desc, *_desc; - list_for_each_entry_safe_reverse(desc, _desc, list, node) { - list_del(&desc->node); -#ifdef FSL_DMA_LD_DEBUG - chan_dbg(chan, "LD %p free\n", desc); -#endif - dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys); - } + list_for_each_entry_safe_reverse(desc, _desc, list, node) + fsl_dma_free_descriptor(chan, desc); } /** @@ -520,35 +630,6 @@ static void fsl_dma_free_chan_resources(struct dma_chan *dchan) } static struct dma_async_tx_descriptor * -fsl_dma_prep_interrupt(struct dma_chan *dchan, unsigned long flags) -{ - struct fsldma_chan *chan; - struct fsl_desc_sw *new; - - if (!dchan) - return NULL; - - chan = to_fsl_chan(dchan); - - new = fsl_dma_alloc_descriptor(chan); - if (!new) { - chan_err(chan, "%s\n", msg_ld_oom); - return NULL; - } - - new->async_tx.cookie = -EBUSY; - new->async_tx.flags = flags; - - /* Insert the link descriptor to the LD ring */ - list_add_tail(&new->node, &new->tx_list); - - /* Set End-of-link to the last link descriptor of new list */ - set_ld_eol(chan, new); - - return &new->async_tx; -} - -static struct dma_async_tx_descriptor * fsl_dma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst, dma_addr_t dma_src, size_t len, unsigned long flags) @@ -817,105 +898,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan, } /** - * fsldma_cleanup_descriptor - cleanup and free a single link descriptor - * @chan: Freescale DMA channel - * @desc: descriptor to cleanup and free - * - * This function is used on a descriptor which has been executed by the DMA - * controller. It will run any callbacks, submit any dependencies, and then - * free the descriptor. - */ -static void fsldma_cleanup_descriptor(struct fsldma_chan *chan, - struct fsl_desc_sw *desc) -{ - struct dma_async_tx_descriptor *txd = &desc->async_tx; - - /* Run the link descriptor callback function */ - if (txd->callback) { -#ifdef FSL_DMA_LD_DEBUG - chan_dbg(chan, "LD %p callback\n", desc); -#endif - txd->callback(txd->callback_param); - } - - /* Run any dependencies */ - dma_run_dependencies(txd); - - dma_descriptor_unmap(txd); -#ifdef FSL_DMA_LD_DEBUG - chan_dbg(chan, "LD %p free\n", desc); -#endif - dma_pool_free(chan->desc_pool, desc, txd->phys); -} - -/** - * fsl_chan_xfer_ld_queue - transfer any pending transactions - * @chan : Freescale DMA channel - * - * HARDWARE STATE: idle - * LOCKING: must hold chan->desc_lock - */ -static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan) -{ - struct fsl_desc_sw *desc; - - /* - * If the list of pending descriptors is empty, then we - * don't need to do any work at all - */ - if (list_empty(&chan->ld_pending)) { - chan_dbg(chan, "no pending LDs\n"); - return; - } - - /* - * The DMA controller is not idle, which means that the interrupt - * handler will start any queued transactions when it runs after - * this transaction finishes - */ - if (!chan->idle) { - chan_dbg(chan, "DMA controller still busy\n"); - return; - } - - /* - * If there are some link descriptors which have not been - * transferred, we need to start the controller - */ - - /* - * Move all elements from the queue of pending transactions - * onto the list of running transactions - */ - chan_dbg(chan, "idle, starting controller\n"); - desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node); - list_splice_tail_init(&chan->ld_pending, &chan->ld_running); - - /* - * The 85xx DMA controller doesn't clear the channel start bit - * automatically at the end of a transfer. Therefore we must clear - * it in software before starting the transfer. - */ - if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { - u32 mode; - - mode = DMA_IN(chan, &chan->regs->mr, 32); - mode &= ~FSL_DMA_MR_CS; - DMA_OUT(chan, &chan->regs->mr, mode, 32); - } - - /* - * Program the descriptor's address into the DMA controller, - * then start the DMA transaction - */ - set_cdar(chan, desc->async_tx.phys); - get_cdar(chan); - - dma_start(chan); - chan->idle = false; -} - -/** * fsl_dma_memcpy_issue_pending - Issue the DMA start command * @chan : Freescale DMA channel */ @@ -1304,12 +1286,10 @@ static int fsldma_of_probe(struct platform_device *op) fdev->irq = irq_of_parse_and_map(op->dev.of_node, 0); dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask); - dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask); dma_cap_set(DMA_SG, fdev->common.cap_mask); dma_cap_set(DMA_SLAVE, fdev->common.cap_mask); fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources; fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources; - fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt; fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy; fdev->common.device_prep_dma_sg = fsl_dma_prep_sg; fdev->common.device_tx_status = fsl_tx_status; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 19041cefabb1..128714622bf5 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -607,8 +607,6 @@ static void sdma_handle_channel_loop(struct sdma_channel *sdmac) if (bd->mode.status & BD_RROR) sdmac->status = DMA_ERROR; - else - sdmac->status = DMA_IN_PROGRESS; bd->mode.status |= BD_DONE; sdmac->buf_tail++; diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index bf02e7beb51a..a7b186d536b3 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -29,8 +29,8 @@ #define DALGN 0x00a0 #define DINT 0x00f0 #define DDADR 0x0200 -#define DSADR 0x0204 -#define DTADR 0x0208 +#define DSADR(n) (0x0204 + ((n) << 4)) +#define DTADR(n) (0x0208 + ((n) << 4)) #define DCMD 0x020c #define DCSR_RUN BIT(31) /* Run Bit (read / write) */ @@ -277,7 +277,7 @@ static void mmp_pdma_free_phy(struct mmp_pdma_chan *pchan) return; /* clear the channel mapping in DRCMR */ - reg = DRCMR(pchan->phy->vchan->drcmr); + reg = DRCMR(pchan->drcmr); writel(0, pchan->phy->base + reg); spin_lock_irqsave(&pdev->phy_lock, flags); @@ -748,11 +748,92 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd, return 0; } +static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan, + dma_cookie_t cookie) +{ + struct mmp_pdma_desc_sw *sw; + u32 curr, residue = 0; + bool passed = false; + bool cyclic = chan->cyclic_first != NULL; + + /* + * If the channel does not have a phy pointer anymore, it has already + * been completed. Therefore, its residue is 0. + */ + if (!chan->phy) + return 0; + + if (chan->dir == DMA_DEV_TO_MEM) + curr = readl(chan->phy->base + DTADR(chan->phy->idx)); + else + curr = readl(chan->phy->base + DSADR(chan->phy->idx)); + + list_for_each_entry(sw, &chan->chain_running, node) { + u32 start, end, len; + + if (chan->dir == DMA_DEV_TO_MEM) + start = sw->desc.dtadr; + else + start = sw->desc.dsadr; + + len = sw->desc.dcmd & DCMD_LENGTH; + end = start + len; + + /* + * 'passed' will be latched once we found the descriptor which + * lies inside the boundaries of the curr pointer. All + * descriptors that occur in the list _after_ we found that + * partially handled descriptor are still to be processed and + * are hence added to the residual bytes counter. + */ + + if (passed) { + residue += len; + } else if (curr >= start && curr <= end) { + residue += end - curr; + passed = true; + } + + /* + * Descriptors that have the ENDIRQEN bit set mark the end of a + * transaction chain, and the cookie assigned with it has been + * returned previously from mmp_pdma_tx_submit(). + * + * In case we have multiple transactions in the running chain, + * and the cookie does not match the one the user asked us + * about, reset the state variables and start over. + * + * This logic does not apply to cyclic transactions, where all + * descriptors have the ENDIRQEN bit set, and for which we + * can't have multiple transactions on one channel anyway. + */ + if (cyclic || !(sw->desc.dcmd & DCMD_ENDIRQEN)) + continue; + + if (sw->async_tx.cookie == cookie) { + return residue; + } else { + residue = 0; + passed = false; + } + } + + /* We should only get here in case of cyclic transactions */ + return residue; +} + static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - return dma_cookie_status(dchan, cookie, txstate); + struct mmp_pdma_chan *chan = to_mmp_pdma_chan(dchan); + enum dma_status ret; + + ret = dma_cookie_status(dchan, cookie, txstate); + if (likely(ret != DMA_ERROR)) + dma_set_residue(txstate, mmp_pdma_residue(chan, cookie)); + + return ret; } /** @@ -858,8 +939,7 @@ static int mmp_pdma_chan_init(struct mmp_pdma_device *pdev, int idx, int irq) struct mmp_pdma_chan *chan; int ret; - chan = devm_kzalloc(pdev->dev, sizeof(struct mmp_pdma_chan), - GFP_KERNEL); + chan = devm_kzalloc(pdev->dev, sizeof(*chan), GFP_KERNEL); if (chan == NULL) return -ENOMEM; @@ -946,8 +1026,7 @@ static int mmp_pdma_probe(struct platform_device *op) irq_num++; } - pdev->phy = devm_kcalloc(pdev->dev, - dma_channels, sizeof(struct mmp_pdma_chan), + pdev->phy = devm_kcalloc(pdev->dev, dma_channels, sizeof(*pdev->phy), GFP_KERNEL); if (pdev->phy == NULL) return -ENOMEM; diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 448750da4402..2ad43738ac8b 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -2,6 +2,7 @@ * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008. * Copyright (C) Semihalf 2009 * Copyright (C) Ilya Yanok, Emcraft Systems 2010 + * Copyright (C) Alexander Popov, Promcontroller 2014 * * Written by Piotr Ziecik <kosmo@semihalf.com>. Hardware description * (defines, structures and comments) was taken from MPC5121 DMA driver @@ -29,8 +30,18 @@ */ /* - * This is initial version of MPC5121 DMA driver. Only memory to memory - * transfers are supported (tested using dmatest module). + * MPC512x and MPC8308 DMA driver. It supports + * memory to memory data transfers (tested using dmatest module) and + * data transfers between memory and peripheral I/O memory + * by means of slave scatter/gather with these limitations: + * - chunked transfers (described by s/g lists with more than one item) + * are refused as long as proper support for scatter/gather is missing; + * - transfers on MPC8308 always start from software as this SoC appears + * not to have external request lines for peripheral flow control; + * - only peripheral devices with 4-byte FIFO access register are supported; + * - minimal memory <-> I/O memory transfer chunk is 4 bytes and consequently + * source and destination addresses must be 4-byte aligned + * and transfer size must be aligned on (4 * maxburst) boundary; */ #include <linux/module.h> @@ -52,9 +63,17 @@ #define MPC_DMA_DESCRIPTORS 64 /* Macro definitions */ -#define MPC_DMA_CHANNELS 64 #define MPC_DMA_TCD_OFFSET 0x1000 +/* + * Maximum channel counts for individual hardware variants + * and the maximum channel count over all supported controllers, + * used for data structure size + */ +#define MPC8308_DMACHAN_MAX 16 +#define MPC512x_DMACHAN_MAX 64 +#define MPC_DMA_CHANNELS 64 + /* Arbitration mode of group and channel */ #define MPC_DMA_DMACR_EDCG (1 << 31) #define MPC_DMA_DMACR_ERGA (1 << 3) @@ -181,6 +200,7 @@ struct mpc_dma_desc { dma_addr_t tcd_paddr; int error; struct list_head node; + int will_access_peripheral; }; struct mpc_dma_chan { @@ -193,6 +213,12 @@ struct mpc_dma_chan { struct mpc_dma_tcd *tcd; dma_addr_t tcd_paddr; + /* Settings for access to peripheral FIFO */ + dma_addr_t src_per_paddr; + u32 src_tcd_nunits; + dma_addr_t dst_per_paddr; + u32 dst_tcd_nunits; + /* Lock for this structure */ spinlock_t lock; }; @@ -243,8 +269,23 @@ static void mpc_dma_execute(struct mpc_dma_chan *mchan) struct mpc_dma_desc *mdesc; int cid = mchan->chan.chan_id; - /* Move all queued descriptors to active list */ - list_splice_tail_init(&mchan->queued, &mchan->active); + while (!list_empty(&mchan->queued)) { + mdesc = list_first_entry(&mchan->queued, + struct mpc_dma_desc, node); + /* + * Grab either several mem-to-mem transfer descriptors + * or one peripheral transfer descriptor, + * don't mix mem-to-mem and peripheral transfer descriptors + * within the same 'active' list. + */ + if (mdesc->will_access_peripheral) { + if (list_empty(&mchan->active)) + list_move_tail(&mdesc->node, &mchan->active); + break; + } else { + list_move_tail(&mdesc->node, &mchan->active); + } + } /* Chain descriptors into one transaction */ list_for_each_entry(mdesc, &mchan->active, node) { @@ -270,7 +311,17 @@ static void mpc_dma_execute(struct mpc_dma_chan *mchan) if (first != prev) mdma->tcd[cid].e_sg = 1; - out_8(&mdma->regs->dmassrt, cid); + + if (mdma->is_mpc8308) { + /* MPC8308, no request lines, software initiated start */ + out_8(&mdma->regs->dmassrt, cid); + } else if (first->will_access_peripheral) { + /* Peripherals involved, start by external request signal */ + out_8(&mdma->regs->dmaserq, cid); + } else { + /* Memory to memory transfer, software initiated start */ + out_8(&mdma->regs->dmassrt, cid); + } } /* Handle interrupt on one half of DMA controller (32 channels) */ @@ -588,6 +639,7 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, } mdesc->error = 0; + mdesc->will_access_peripheral = 0; tcd = mdesc->tcd; /* Prepare Transfer Control Descriptor for this transaction */ @@ -635,6 +687,193 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, return &mdesc->desc; } +static struct dma_async_tx_descriptor * +mpc_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct mpc_dma *mdma = dma_chan_to_mpc_dma(chan); + struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan); + struct mpc_dma_desc *mdesc = NULL; + dma_addr_t per_paddr; + u32 tcd_nunits; + struct mpc_dma_tcd *tcd; + unsigned long iflags; + struct scatterlist *sg; + size_t len; + int iter, i; + + /* Currently there is no proper support for scatter/gather */ + if (sg_len != 1) + return NULL; + + if (!is_slave_direction(direction)) + return NULL; + + for_each_sg(sgl, sg, sg_len, i) { + spin_lock_irqsave(&mchan->lock, iflags); + + mdesc = list_first_entry(&mchan->free, + struct mpc_dma_desc, node); + if (!mdesc) { + spin_unlock_irqrestore(&mchan->lock, iflags); + /* Try to free completed descriptors */ + mpc_dma_process_completed(mdma); + return NULL; + } + + list_del(&mdesc->node); + + if (direction == DMA_DEV_TO_MEM) { + per_paddr = mchan->src_per_paddr; + tcd_nunits = mchan->src_tcd_nunits; + } else { + per_paddr = mchan->dst_per_paddr; + tcd_nunits = mchan->dst_tcd_nunits; + } + + spin_unlock_irqrestore(&mchan->lock, iflags); + + if (per_paddr == 0 || tcd_nunits == 0) + goto err_prep; + + mdesc->error = 0; + mdesc->will_access_peripheral = 1; + + /* Prepare Transfer Control Descriptor for this transaction */ + tcd = mdesc->tcd; + + memset(tcd, 0, sizeof(struct mpc_dma_tcd)); + + if (!IS_ALIGNED(sg_dma_address(sg), 4)) + goto err_prep; + + if (direction == DMA_DEV_TO_MEM) { + tcd->saddr = per_paddr; + tcd->daddr = sg_dma_address(sg); + tcd->soff = 0; + tcd->doff = 4; + } else { + tcd->saddr = sg_dma_address(sg); + tcd->daddr = per_paddr; + tcd->soff = 4; + tcd->doff = 0; + } + + tcd->ssize = MPC_DMA_TSIZE_4; + tcd->dsize = MPC_DMA_TSIZE_4; + + len = sg_dma_len(sg); + tcd->nbytes = tcd_nunits * 4; + if (!IS_ALIGNED(len, tcd->nbytes)) + goto err_prep; + + iter = len / tcd->nbytes; + if (iter >= 1 << 15) { + /* len is too big */ + goto err_prep; + } + /* citer_linkch contains the high bits of iter */ + tcd->biter = iter & 0x1ff; + tcd->biter_linkch = iter >> 9; + tcd->citer = tcd->biter; + tcd->citer_linkch = tcd->biter_linkch; + + tcd->e_sg = 0; + tcd->d_req = 1; + + /* Place descriptor in prepared list */ + spin_lock_irqsave(&mchan->lock, iflags); + list_add_tail(&mdesc->node, &mchan->prepared); + spin_unlock_irqrestore(&mchan->lock, iflags); + } + + return &mdesc->desc; + +err_prep: + /* Put the descriptor back */ + spin_lock_irqsave(&mchan->lock, iflags); + list_add_tail(&mdesc->node, &mchan->free); + spin_unlock_irqrestore(&mchan->lock, iflags); + + return NULL; +} + +static int mpc_dma_device_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct mpc_dma_chan *mchan; + struct mpc_dma *mdma; + struct dma_slave_config *cfg; + unsigned long flags; + + mchan = dma_chan_to_mpc_dma_chan(chan); + switch (cmd) { + case DMA_TERMINATE_ALL: + /* Disable channel requests */ + mdma = dma_chan_to_mpc_dma(chan); + + spin_lock_irqsave(&mchan->lock, flags); + + out_8(&mdma->regs->dmacerq, chan->chan_id); + list_splice_tail_init(&mchan->prepared, &mchan->free); + list_splice_tail_init(&mchan->queued, &mchan->free); + list_splice_tail_init(&mchan->active, &mchan->free); + + spin_unlock_irqrestore(&mchan->lock, flags); + + return 0; + + case DMA_SLAVE_CONFIG: + /* + * Software constraints: + * - only transfers between a peripheral device and + * memory are supported; + * - only peripheral devices with 4-byte FIFO access register + * are supported; + * - minimal transfer chunk is 4 bytes and consequently + * source and destination addresses must be 4-byte aligned + * and transfer size must be aligned on (4 * maxburst) + * boundary; + * - during the transfer RAM address is being incremented by + * the size of minimal transfer chunk; + * - peripheral port's address is constant during the transfer. + */ + + cfg = (void *)arg; + + if (cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES || + cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES || + !IS_ALIGNED(cfg->src_addr, 4) || + !IS_ALIGNED(cfg->dst_addr, 4)) { + return -EINVAL; + } + + spin_lock_irqsave(&mchan->lock, flags); + + mchan->src_per_paddr = cfg->src_addr; + mchan->src_tcd_nunits = cfg->src_maxburst; + mchan->dst_per_paddr = cfg->dst_addr; + mchan->dst_tcd_nunits = cfg->dst_maxburst; + + /* Apply defaults */ + if (mchan->src_tcd_nunits == 0) + mchan->src_tcd_nunits = 1; + if (mchan->dst_tcd_nunits == 0) + mchan->dst_tcd_nunits = 1; + + spin_unlock_irqrestore(&mchan->lock, flags); + + return 0; + + default: + /* Unknown command */ + break; + } + + return -ENXIO; +} + static int mpc_dma_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; @@ -649,13 +888,15 @@ static int mpc_dma_probe(struct platform_device *op) mdma = devm_kzalloc(dev, sizeof(struct mpc_dma), GFP_KERNEL); if (!mdma) { dev_err(dev, "Memory exhausted!\n"); - return -ENOMEM; + retval = -ENOMEM; + goto err; } mdma->irq = irq_of_parse_and_map(dn, 0); if (mdma->irq == NO_IRQ) { dev_err(dev, "Error mapping IRQ!\n"); - return -EINVAL; + retval = -EINVAL; + goto err; } if (of_device_is_compatible(dn, "fsl,mpc8308-dma")) { @@ -663,14 +904,15 @@ static int mpc_dma_probe(struct platform_device *op) mdma->irq2 = irq_of_parse_and_map(dn, 1); if (mdma->irq2 == NO_IRQ) { dev_err(dev, "Error mapping IRQ!\n"); - return -EINVAL; + retval = -EINVAL; + goto err_dispose1; } } retval = of_address_to_resource(dn, 0, &res); if (retval) { dev_err(dev, "Error parsing memory region!\n"); - return retval; + goto err_dispose2; } regs_start = res.start; @@ -678,31 +920,34 @@ static int mpc_dma_probe(struct platform_device *op) if (!devm_request_mem_region(dev, regs_start, regs_size, DRV_NAME)) { dev_err(dev, "Error requesting memory region!\n"); - return -EBUSY; + retval = -EBUSY; + goto err_dispose2; } mdma->regs = devm_ioremap(dev, regs_start, regs_size); if (!mdma->regs) { dev_err(dev, "Error mapping memory region!\n"); - return -ENOMEM; + retval = -ENOMEM; + goto err_dispose2; } mdma->tcd = (struct mpc_dma_tcd *)((u8 *)(mdma->regs) + MPC_DMA_TCD_OFFSET); - retval = devm_request_irq(dev, mdma->irq, &mpc_dma_irq, 0, DRV_NAME, - mdma); + retval = request_irq(mdma->irq, &mpc_dma_irq, 0, DRV_NAME, mdma); if (retval) { dev_err(dev, "Error requesting IRQ!\n"); - return -EINVAL; + retval = -EINVAL; + goto err_dispose2; } if (mdma->is_mpc8308) { - retval = devm_request_irq(dev, mdma->irq2, &mpc_dma_irq, 0, - DRV_NAME, mdma); + retval = request_irq(mdma->irq2, &mpc_dma_irq, 0, + DRV_NAME, mdma); if (retval) { dev_err(dev, "Error requesting IRQ2!\n"); - return -EINVAL; + retval = -EINVAL; + goto err_free1; } } @@ -710,18 +955,21 @@ static int mpc_dma_probe(struct platform_device *op) dma = &mdma->dma; dma->dev = dev; - if (!mdma->is_mpc8308) - dma->chancnt = MPC_DMA_CHANNELS; + if (mdma->is_mpc8308) + dma->chancnt = MPC8308_DMACHAN_MAX; else - dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */ + dma->chancnt = MPC512x_DMACHAN_MAX; dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources; dma->device_free_chan_resources = mpc_dma_free_chan_resources; dma->device_issue_pending = mpc_dma_issue_pending; dma->device_tx_status = mpc_dma_tx_status; dma->device_prep_dma_memcpy = mpc_dma_prep_memcpy; + dma->device_prep_slave_sg = mpc_dma_prep_slave_sg; + dma->device_control = mpc_dma_device_control; INIT_LIST_HEAD(&dma->channels); dma_cap_set(DMA_MEMCPY, dma->cap_mask); + dma_cap_set(DMA_SLAVE, dma->cap_mask); for (i = 0; i < dma->chancnt; i++) { mchan = &mdma->channels[i]; @@ -747,7 +995,19 @@ static int mpc_dma_probe(struct platform_device *op) * - Round-robin group arbitration, * - Round-robin channel arbitration. */ - if (!mdma->is_mpc8308) { + if (mdma->is_mpc8308) { + /* MPC8308 has 16 channels and lacks some registers */ + out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA); + + /* enable snooping */ + out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE); + /* Disable error interrupts */ + out_be32(&mdma->regs->dmaeeil, 0); + + /* Clear interrupts status */ + out_be32(&mdma->regs->dmaintl, 0xFFFF); + out_be32(&mdma->regs->dmaerrl, 0xFFFF); + } else { out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG | MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA); @@ -768,29 +1028,28 @@ static int mpc_dma_probe(struct platform_device *op) /* Route interrupts to IPIC */ out_be32(&mdma->regs->dmaihsa, 0); out_be32(&mdma->regs->dmailsa, 0); - } else { - /* MPC8308 has 16 channels and lacks some registers */ - out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA); - - /* enable snooping */ - out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE); - /* Disable error interrupts */ - out_be32(&mdma->regs->dmaeeil, 0); - - /* Clear interrupts status */ - out_be32(&mdma->regs->dmaintl, 0xFFFF); - out_be32(&mdma->regs->dmaerrl, 0xFFFF); } /* Register DMA engine */ dev_set_drvdata(dev, mdma); retval = dma_async_device_register(dma); - if (retval) { - devm_free_irq(dev, mdma->irq, mdma); - irq_dispose_mapping(mdma->irq); - } + if (retval) + goto err_free2; return retval; + +err_free2: + if (mdma->is_mpc8308) + free_irq(mdma->irq2, mdma); +err_free1: + free_irq(mdma->irq, mdma); +err_dispose2: + if (mdma->is_mpc8308) + irq_dispose_mapping(mdma->irq2); +err_dispose1: + irq_dispose_mapping(mdma->irq); +err: + return retval; } static int mpc_dma_remove(struct platform_device *op) @@ -799,7 +1058,11 @@ static int mpc_dma_remove(struct platform_device *op) struct mpc_dma *mdma = dev_get_drvdata(dev); dma_async_device_unregister(&mdma->dma); - devm_free_irq(dev, mdma->irq, mdma); + if (mdma->is_mpc8308) { + free_irq(mdma->irq2, mdma); + irq_dispose_mapping(mdma->irq2); + } + free_irq(mdma->irq, mdma); irq_dispose_mapping(mdma->irq); return 0; @@ -807,6 +1070,7 @@ static int mpc_dma_remove(struct platform_device *op) static struct of_device_id mpc_dma_match[] = { { .compatible = "fsl,mpc5121-dma", }, + { .compatible = "fsl,mpc8308-dma", }, {}, }; diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 05fa548bd659..9f9ca9fe5ce6 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -21,6 +21,7 @@ #include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/pch_dma.h> @@ -996,7 +997,7 @@ static void pch_dma_remove(struct pci_dev *pdev) #define PCI_DEVICE_ID_ML7831_DMA1_8CH 0x8810 #define PCI_DEVICE_ID_ML7831_DMA2_4CH 0x8815 -DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = { +const struct pci_device_id pch_dma_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */ diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index b209a0f17344..012520c9fd79 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -164,6 +164,7 @@ struct s3c24xx_sg { * @disrcc: value for source control register * @didstc: value for destination control register * @dcon: base value for dcon register + * @cyclic: indicate cyclic transfer */ struct s3c24xx_txd { struct virt_dma_desc vd; @@ -173,6 +174,7 @@ struct s3c24xx_txd { u32 disrcc; u32 didstc; u32 dcon; + bool cyclic; }; struct s3c24xx_dma_chan; @@ -669,8 +671,10 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data) /* when more sg's are in this txd, start the next one */ if (!list_is_last(txd->at, &txd->dsg_list)) { txd->at = txd->at->next; + if (txd->cyclic) + vchan_cyclic_callback(&txd->vd); s3c24xx_dma_start_next_sg(s3cchan, txd); - } else { + } else if (!txd->cyclic) { s3cchan->at = NULL; vchan_cookie_complete(&txd->vd); @@ -682,6 +686,12 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data) s3c24xx_dma_start_next_txd(s3cchan); else s3c24xx_dma_phy_free(s3cchan); + } else { + vchan_cyclic_callback(&txd->vd); + + /* Cyclic: reset at beginning */ + txd->at = txd->dsg_list.next; + s3c24xx_dma_start_next_sg(s3cchan, txd); } } spin_unlock(&s3cchan->vc.lock); @@ -877,6 +887,104 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); } +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, + enum dma_transfer_direction direction, unsigned long flags, + void *context) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; + struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; + struct s3c24xx_txd *txd; + struct s3c24xx_sg *dsg; + unsigned sg_len; + dma_addr_t slave_addr; + u32 hwcfg = 0; + int i; + + dev_dbg(&s3cdma->pdev->dev, + "prepare cyclic transaction of %zu bytes with period %zu from %s\n", + size, period, s3cchan->name); + + if (!is_slave_direction(direction)) { + dev_err(&s3cdma->pdev->dev, + "direction %d unsupported\n", direction); + return NULL; + } + + txd = s3c24xx_dma_get_txd(); + if (!txd) + return NULL; + + txd->cyclic = 1; + + if (cdata->handshake) + txd->dcon |= S3C24XX_DCON_HANDSHAKE; + + switch (cdata->bus) { + case S3C24XX_DMA_APB: + txd->dcon |= S3C24XX_DCON_SYNC_PCLK; + hwcfg |= S3C24XX_DISRCC_LOC_APB; + break; + case S3C24XX_DMA_AHB: + txd->dcon |= S3C24XX_DCON_SYNC_HCLK; + hwcfg |= S3C24XX_DISRCC_LOC_AHB; + break; + } + + /* + * Always assume our peripheral desintation is a fixed + * address in memory. + */ + hwcfg |= S3C24XX_DISRCC_INC_FIXED; + + /* + * Individual dma operations are requested by the slave, + * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE). + */ + txd->dcon |= S3C24XX_DCON_SERV_SINGLE; + + if (direction == DMA_MEM_TO_DEV) { + txd->disrcc = S3C24XX_DISRCC_LOC_AHB | + S3C24XX_DISRCC_INC_INCREMENT; + txd->didstc = hwcfg; + slave_addr = s3cchan->cfg.dst_addr; + txd->width = s3cchan->cfg.dst_addr_width; + } else { + txd->disrcc = hwcfg; + txd->didstc = S3C24XX_DIDSTC_LOC_AHB | + S3C24XX_DIDSTC_INC_INCREMENT; + slave_addr = s3cchan->cfg.src_addr; + txd->width = s3cchan->cfg.src_addr_width; + } + + sg_len = size / period; + + for (i = 0; i < sg_len; i++) { + dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); + if (!dsg) { + s3c24xx_dma_free_txd(txd); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = period; + /* Check last period length */ + if (i == sg_len - 1) + dsg->len = size - period * i; + if (direction == DMA_MEM_TO_DEV) { + dsg->src_addr = addr + period * i; + dsg->dst_addr = slave_addr; + } else { /* DMA_DEV_TO_MEM */ + dsg->src_addr = slave_addr; + dsg->dst_addr = addr + period * i; + } + } + + return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); +} + static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, @@ -961,7 +1069,6 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( dsg->src_addr = slave_addr; dsg->dst_addr = sg_dma_address(sg); } - break; } return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); @@ -1198,6 +1305,7 @@ static int s3c24xx_dma_probe(struct platform_device *pdev) /* Initialize slave engine for SoC internal dedicated peripherals */ dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask); + dma_cap_set(DMA_CYCLIC, s3cdma->slave.cap_mask); dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask); s3cdma->slave.dev = &pdev->dev; s3cdma->slave.device_alloc_chan_resources = @@ -1207,6 +1315,7 @@ static int s3c24xx_dma_probe(struct platform_device *pdev) s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status; s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending; s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg; + s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic; s3cdma->slave.device_control = s3c24xx_dma_control; /* Register as many memcpy channels as there are physical channels */ diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig index b4c813831006..0f719816c91b 100644 --- a/drivers/dma/sh/Kconfig +++ b/drivers/dma/sh/Kconfig @@ -4,7 +4,7 @@ config SH_DMAE_BASE bool "Renesas SuperH DMA Engine support" - depends on (SUPERH && SH_DMA) || (ARM && ARCH_SHMOBILE) + depends on (SUPERH && SH_DMA) || ARCH_SHMOBILE || COMPILE_TEST depends on !SH_DMA_API default y select DMA_ENGINE diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 3083d901a414..b212d9471ab5 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -18,6 +18,7 @@ #include <linux/dmaengine.h> #include <linux/delay.h> +#include <linux/err.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index 52396771acbe..b35007e21e6b 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -73,8 +73,7 @@ static void shdma_chan_xfer_ld_queue(struct shdma_chan *schan) static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx) { struct shdma_desc *chunk, *c, *desc = - container_of(tx, struct shdma_desc, async_tx), - *last = desc; + container_of(tx, struct shdma_desc, async_tx); struct shdma_chan *schan = to_shdma_chan(tx->chan); dma_async_tx_callback callback = tx->callback; dma_cookie_t cookie; @@ -98,19 +97,20 @@ static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx) &chunk->node == &schan->ld_free)) break; chunk->mark = DESC_SUBMITTED; - /* Callback goes to the last chunk */ - chunk->async_tx.callback = NULL; + if (chunk->chunks == 1) { + chunk->async_tx.callback = callback; + chunk->async_tx.callback_param = tx->callback_param; + } else { + /* Callback goes to the last chunk */ + chunk->async_tx.callback = NULL; + } chunk->cookie = cookie; list_move_tail(&chunk->node, &schan->ld_queue); - last = chunk; dev_dbg(schan->dev, "submit #%d@%p on %d\n", - tx->cookie, &last->async_tx, schan->id); + tx->cookie, &chunk->async_tx, schan->id); } - last->async_tx.callback = callback; - last->async_tx.callback_param = tx->callback_param; - if (power_up) { int ret; schan->pm_state = SHDMA_PM_BUSY; @@ -304,6 +304,7 @@ static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all) dma_async_tx_callback callback = NULL; void *param = NULL; unsigned long flags; + LIST_HEAD(cyclic_list); spin_lock_irqsave(&schan->chan_lock, flags); list_for_each_entry_safe(desc, _desc, &schan->ld_queue, node) { @@ -369,10 +370,16 @@ static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all) if (((desc->mark == DESC_COMPLETED || desc->mark == DESC_WAITING) && async_tx_test_ack(&desc->async_tx)) || all) { - /* Remove from ld_queue list */ - desc->mark = DESC_IDLE; - list_move(&desc->node, &schan->ld_free); + if (all || !desc->cyclic) { + /* Remove from ld_queue list */ + desc->mark = DESC_IDLE; + list_move(&desc->node, &schan->ld_free); + } else { + /* reuse as cyclic */ + desc->mark = DESC_SUBMITTED; + list_move_tail(&desc->node, &cyclic_list); + } if (list_empty(&schan->ld_queue)) { dev_dbg(schan->dev, "Bring down channel %d\n", schan->id); @@ -389,6 +396,8 @@ static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all) */ schan->dma_chan.completed_cookie = schan->dma_chan.cookie; + list_splice_tail(&cyclic_list, &schan->ld_queue); + spin_unlock_irqrestore(&schan->chan_lock, flags); if (callback) @@ -521,7 +530,7 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan, */ static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan, struct scatterlist *sgl, unsigned int sg_len, dma_addr_t *addr, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, bool cyclic) { struct scatterlist *sg; struct shdma_desc *first = NULL, *new = NULL /* compiler... */; @@ -569,7 +578,11 @@ static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan, if (!new) goto err_get_desc; - new->chunks = chunks--; + new->cyclic = cyclic; + if (cyclic) + new->chunks = 1; + else + new->chunks = chunks--; list_add_tail(&new->node, &tx_list); } while (len); } @@ -612,7 +625,8 @@ static struct dma_async_tx_descriptor *shdma_prep_memcpy( sg_dma_address(&sg) = dma_src; sg_dma_len(&sg) = len; - return shdma_prep_sg(schan, &sg, 1, &dma_dest, DMA_MEM_TO_MEM, flags); + return shdma_prep_sg(schan, &sg, 1, &dma_dest, DMA_MEM_TO_MEM, + flags, false); } static struct dma_async_tx_descriptor *shdma_prep_slave_sg( @@ -640,7 +654,58 @@ static struct dma_async_tx_descriptor *shdma_prep_slave_sg( slave_addr = ops->slave_addr(schan); return shdma_prep_sg(schan, sgl, sg_len, &slave_addr, - direction, flags); + direction, flags, false); +} + +#define SHDMA_MAX_SG_LEN 32 + +static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct shdma_chan *schan = to_shdma_chan(chan); + struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device); + const struct shdma_ops *ops = sdev->ops; + unsigned int sg_len = buf_len / period_len; + int slave_id = schan->slave_id; + dma_addr_t slave_addr; + struct scatterlist sgl[SHDMA_MAX_SG_LEN]; + int i; + + if (!chan) + return NULL; + + BUG_ON(!schan->desc_num); + + if (sg_len > SHDMA_MAX_SG_LEN) { + dev_err(schan->dev, "sg length %d exceds limit %d", + sg_len, SHDMA_MAX_SG_LEN); + return NULL; + } + + /* Someone calling slave DMA on a generic channel? */ + if (slave_id < 0 || (buf_len < period_len)) { + dev_warn(schan->dev, + "%s: bad parameter: buf_len=%zu, period_len=%zu, id=%d\n", + __func__, buf_len, period_len, slave_id); + return NULL; + } + + slave_addr = ops->slave_addr(schan); + + sg_init_table(sgl, sg_len); + for (i = 0; i < sg_len; i++) { + dma_addr_t src = buf_addr + (period_len * i); + + sg_set_page(&sgl[i], pfn_to_page(PFN_DOWN(src)), period_len, + offset_in_page(src)); + sg_dma_address(&sgl[i]) = src; + sg_dma_len(&sgl[i]) = period_len; + } + + return shdma_prep_sg(schan, sgl, sg_len, &slave_addr, + direction, flags, true); } static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, @@ -915,6 +980,7 @@ int shdma_init(struct device *dev, struct shdma_dev *sdev, /* Compulsory for DMA_SLAVE fields */ dma_dev->device_prep_slave_sg = shdma_prep_slave_sg; + dma_dev->device_prep_dma_cyclic = shdma_prep_dma_cyclic; dma_dev->device_control = shdma_control; dma_dev->dev = dev; diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c index dda7e7563f5d..146d5df926db 100644 --- a/drivers/dma/sh/shdmac.c +++ b/drivers/dma/sh/shdmac.c @@ -18,21 +18,22 @@ * */ +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/err.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kdebug.h> #include <linux/module.h> +#include <linux/notifier.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/dmaengine.h> -#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/rculist.h> #include <linux/sh_dma.h> -#include <linux/notifier.h> -#include <linux/kdebug.h> +#include <linux/slab.h> #include <linux/spinlock.h> -#include <linux/rculist.h> #include "../dmaengine.h" #include "shdma.h" diff --git a/drivers/dma/sh/sudmac.c b/drivers/dma/sh/sudmac.c index 4e7df43b50d6..3ce103909896 100644 --- a/drivers/dma/sh/sudmac.c +++ b/drivers/dma/sh/sudmac.c @@ -14,12 +14,13 @@ * published by the Free Software Foundation. */ +#include <linux/dmaengine.h> +#include <linux/err.h> #include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> #include <linux/interrupt.h> -#include <linux/dmaengine.h> +#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/sudmac.h> struct sudmac_chan { diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index bf18c786ed40..c7984459ede7 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -556,7 +556,6 @@ struct d40_gen_dmac { * later * @reg_val_backup_chan: Backup data for standard channel parameter registers. * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off. - * @initialized: true if the dma has been initialized * @gen_dmac: the struct for generic registers values to represent u8500/8540 * DMA controller */ @@ -594,7 +593,6 @@ struct d40_base { u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; u32 *reg_val_backup_chan; u16 gcc_pwr_off_mask; - bool initialized; struct d40_gen_dmac gen_dmac; }; @@ -1056,62 +1054,6 @@ static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, return len; } - -#ifdef CONFIG_PM -static void dma40_backup(void __iomem *baseaddr, u32 *backup, - u32 *regaddr, int num, bool save) -{ - int i; - - for (i = 0; i < num; i++) { - void __iomem *addr = baseaddr + regaddr[i]; - - if (save) - backup[i] = readl_relaxed(addr); - else - writel_relaxed(backup[i], addr); - } -} - -static void d40_save_restore_registers(struct d40_base *base, bool save) -{ - int i; - - /* Save/Restore channel specific registers */ - for (i = 0; i < base->num_phy_chans; i++) { - void __iomem *addr; - int idx; - - if (base->phy_res[i].reserved) - continue; - - addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; - idx = i * ARRAY_SIZE(d40_backup_regs_chan); - - dma40_backup(addr, &base->reg_val_backup_chan[idx], - d40_backup_regs_chan, - ARRAY_SIZE(d40_backup_regs_chan), - save); - } - - /* Save/Restore global registers */ - dma40_backup(base->virtbase, base->reg_val_backup, - d40_backup_regs, ARRAY_SIZE(d40_backup_regs), - save); - - /* Save/Restore registers only existing on dma40 v3 and later */ - if (base->gen_dmac.backup) - dma40_backup(base->virtbase, base->reg_val_backup_v4, - base->gen_dmac.backup, - base->gen_dmac.backup_size, - save); -} -#else -static void d40_save_restore_registers(struct d40_base *base, bool save) -{ -} -#endif - static int __d40_execute_command_phy(struct d40_chan *d40c, enum d40_command command) { @@ -1495,8 +1437,8 @@ static int d40_pause(struct d40_chan *d40c) if (!d40c->busy) return 0; - pm_runtime_get_sync(d40c->base->dev); spin_lock_irqsave(&d40c->lock, flags); + pm_runtime_get_sync(d40c->base->dev); res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); @@ -2998,18 +2940,88 @@ failure1: } /* Suspend resume functionality */ -#ifdef CONFIG_PM -static int dma40_pm_suspend(struct device *dev) +#ifdef CONFIG_PM_SLEEP +static int dma40_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct d40_base *base = platform_get_drvdata(pdev); - int ret = 0; + int ret; + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; if (base->lcpa_regulator) ret = regulator_disable(base->lcpa_regulator); return ret; } +static int dma40_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct d40_base *base = platform_get_drvdata(pdev); + int ret = 0; + + if (base->lcpa_regulator) { + ret = regulator_enable(base->lcpa_regulator); + if (ret) + return ret; + } + + return pm_runtime_force_resume(dev); +} +#endif + +#ifdef CONFIG_PM +static void dma40_backup(void __iomem *baseaddr, u32 *backup, + u32 *regaddr, int num, bool save) +{ + int i; + + for (i = 0; i < num; i++) { + void __iomem *addr = baseaddr + regaddr[i]; + + if (save) + backup[i] = readl_relaxed(addr); + else + writel_relaxed(backup[i], addr); + } +} + +static void d40_save_restore_registers(struct d40_base *base, bool save) +{ + int i; + + /* Save/Restore channel specific registers */ + for (i = 0; i < base->num_phy_chans; i++) { + void __iomem *addr; + int idx; + + if (base->phy_res[i].reserved) + continue; + + addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; + idx = i * ARRAY_SIZE(d40_backup_regs_chan); + + dma40_backup(addr, &base->reg_val_backup_chan[idx], + d40_backup_regs_chan, + ARRAY_SIZE(d40_backup_regs_chan), + save); + } + + /* Save/Restore global registers */ + dma40_backup(base->virtbase, base->reg_val_backup, + d40_backup_regs, ARRAY_SIZE(d40_backup_regs), + save); + + /* Save/Restore registers only existing on dma40 v3 and later */ + if (base->gen_dmac.backup) + dma40_backup(base->virtbase, base->reg_val_backup_v4, + base->gen_dmac.backup, + base->gen_dmac.backup_size, + save); +} + static int dma40_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -3030,36 +3042,20 @@ static int dma40_runtime_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct d40_base *base = platform_get_drvdata(pdev); - if (base->initialized) - d40_save_restore_registers(base, false); + d40_save_restore_registers(base, false); writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); return 0; } - -static int dma40_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct d40_base *base = platform_get_drvdata(pdev); - int ret = 0; - - if (base->lcpa_regulator) - ret = regulator_enable(base->lcpa_regulator); - - return ret; -} +#endif static const struct dev_pm_ops dma40_pm_ops = { - .suspend = dma40_pm_suspend, - .runtime_suspend = dma40_runtime_suspend, - .runtime_resume = dma40_runtime_resume, - .resume = dma40_resume, + SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume) + SET_PM_RUNTIME_PM_OPS(dma40_runtime_suspend, + dma40_runtime_resume, + NULL) }; -#define DMA40_PM_OPS (&dma40_pm_ops) -#else -#define DMA40_PM_OPS NULL -#endif /* Initialization functions. */ @@ -3645,12 +3641,6 @@ static int __init d40_probe(struct platform_device *pdev) goto failure; } - pm_runtime_irq_safe(base->dev); - pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); - pm_runtime_use_autosuspend(base->dev); - pm_runtime_enable(base->dev); - pm_runtime_resume(base->dev); - if (base->plat_data->use_esram_lcla) { base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); @@ -3671,7 +3661,15 @@ static int __init d40_probe(struct platform_device *pdev) } } - base->initialized = true; + writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); + + pm_runtime_irq_safe(base->dev); + pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(base->dev); + pm_runtime_mark_last_busy(base->dev); + pm_runtime_set_active(base->dev); + pm_runtime_enable(base->dev); + ret = d40_dmaengine_init(base, num_reserved_chans); if (ret) goto failure; @@ -3754,7 +3752,7 @@ static struct platform_driver d40_driver = { .driver = { .owner = THIS_MODULE, .name = D40_NAME, - .pm = DMA40_PM_OPS, + .pm = &dma40_pm_ops, .of_match_table = d40_match, }, }; diff --git a/drivers/dma/xilinx/Makefile b/drivers/dma/xilinx/Makefile new file mode 100644 index 000000000000..3c4e9f2fea28 --- /dev/null +++ b/drivers/dma/xilinx/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_XILINX_VDMA) += xilinx_vdma.o diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c new file mode 100644 index 000000000000..42a13e8d4607 --- /dev/null +++ b/drivers/dma/xilinx/xilinx_vdma.c @@ -0,0 +1,1379 @@ +/* + * DMA driver for Xilinx Video DMA Engine + * + * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved. + * + * Based on the Freescale DMA driver. + * + * Description: + * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP + * core that provides high-bandwidth direct memory access between memory + * and AXI4-Stream type video target peripherals. The core provides efficient + * two dimensional DMA operations with independent asynchronous read (S2MM) + * and write (MM2S) channel operation. It can be configured to have either + * one channel or two channels. If configured as two channels, one is to + * transmit to the video device (MM2S) and another is to receive from the + * video device (S2MM). Initialization, status, interrupt and management + * registers are accessed through an AXI4-Lite slave interface. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/amba/xilinx_dma.h> +#include <linux/bitops.h> +#include <linux/dmapool.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_dma.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/slab.h> + +#include "../dmaengine.h" + +/* Register/Descriptor Offsets */ +#define XILINX_VDMA_MM2S_CTRL_OFFSET 0x0000 +#define XILINX_VDMA_S2MM_CTRL_OFFSET 0x0030 +#define XILINX_VDMA_MM2S_DESC_OFFSET 0x0050 +#define XILINX_VDMA_S2MM_DESC_OFFSET 0x00a0 + +/* Control Registers */ +#define XILINX_VDMA_REG_DMACR 0x0000 +#define XILINX_VDMA_DMACR_DELAY_MAX 0xff +#define XILINX_VDMA_DMACR_DELAY_SHIFT 24 +#define XILINX_VDMA_DMACR_FRAME_COUNT_MAX 0xff +#define XILINX_VDMA_DMACR_FRAME_COUNT_SHIFT 16 +#define XILINX_VDMA_DMACR_ERR_IRQ BIT(14) +#define XILINX_VDMA_DMACR_DLY_CNT_IRQ BIT(13) +#define XILINX_VDMA_DMACR_FRM_CNT_IRQ BIT(12) +#define XILINX_VDMA_DMACR_MASTER_SHIFT 8 +#define XILINX_VDMA_DMACR_FSYNCSRC_SHIFT 5 +#define XILINX_VDMA_DMACR_FRAMECNT_EN BIT(4) +#define XILINX_VDMA_DMACR_GENLOCK_EN BIT(3) +#define XILINX_VDMA_DMACR_RESET BIT(2) +#define XILINX_VDMA_DMACR_CIRC_EN BIT(1) +#define XILINX_VDMA_DMACR_RUNSTOP BIT(0) +#define XILINX_VDMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5) + +#define XILINX_VDMA_REG_DMASR 0x0004 +#define XILINX_VDMA_DMASR_EOL_LATE_ERR BIT(15) +#define XILINX_VDMA_DMASR_ERR_IRQ BIT(14) +#define XILINX_VDMA_DMASR_DLY_CNT_IRQ BIT(13) +#define XILINX_VDMA_DMASR_FRM_CNT_IRQ BIT(12) +#define XILINX_VDMA_DMASR_SOF_LATE_ERR BIT(11) +#define XILINX_VDMA_DMASR_SG_DEC_ERR BIT(10) +#define XILINX_VDMA_DMASR_SG_SLV_ERR BIT(9) +#define XILINX_VDMA_DMASR_EOF_EARLY_ERR BIT(8) +#define XILINX_VDMA_DMASR_SOF_EARLY_ERR BIT(7) +#define XILINX_VDMA_DMASR_DMA_DEC_ERR BIT(6) +#define XILINX_VDMA_DMASR_DMA_SLAVE_ERR BIT(5) +#define XILINX_VDMA_DMASR_DMA_INT_ERR BIT(4) +#define XILINX_VDMA_DMASR_IDLE BIT(1) +#define XILINX_VDMA_DMASR_HALTED BIT(0) +#define XILINX_VDMA_DMASR_DELAY_MASK GENMASK(31, 24) +#define XILINX_VDMA_DMASR_FRAME_COUNT_MASK GENMASK(23, 16) + +#define XILINX_VDMA_REG_CURDESC 0x0008 +#define XILINX_VDMA_REG_TAILDESC 0x0010 +#define XILINX_VDMA_REG_REG_INDEX 0x0014 +#define XILINX_VDMA_REG_FRMSTORE 0x0018 +#define XILINX_VDMA_REG_THRESHOLD 0x001c +#define XILINX_VDMA_REG_FRMPTR_STS 0x0024 +#define XILINX_VDMA_REG_PARK_PTR 0x0028 +#define XILINX_VDMA_PARK_PTR_WR_REF_SHIFT 8 +#define XILINX_VDMA_PARK_PTR_RD_REF_SHIFT 0 +#define XILINX_VDMA_REG_VDMA_VERSION 0x002c + +/* Register Direct Mode Registers */ +#define XILINX_VDMA_REG_VSIZE 0x0000 +#define XILINX_VDMA_REG_HSIZE 0x0004 + +#define XILINX_VDMA_REG_FRMDLY_STRIDE 0x0008 +#define XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT 24 +#define XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT 0 + +#define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n)) + +/* HW specific definitions */ +#define XILINX_VDMA_MAX_CHANS_PER_DEVICE 0x2 + +#define XILINX_VDMA_DMAXR_ALL_IRQ_MASK \ + (XILINX_VDMA_DMASR_FRM_CNT_IRQ | \ + XILINX_VDMA_DMASR_DLY_CNT_IRQ | \ + XILINX_VDMA_DMASR_ERR_IRQ) + +#define XILINX_VDMA_DMASR_ALL_ERR_MASK \ + (XILINX_VDMA_DMASR_EOL_LATE_ERR | \ + XILINX_VDMA_DMASR_SOF_LATE_ERR | \ + XILINX_VDMA_DMASR_SG_DEC_ERR | \ + XILINX_VDMA_DMASR_SG_SLV_ERR | \ + XILINX_VDMA_DMASR_EOF_EARLY_ERR | \ + XILINX_VDMA_DMASR_SOF_EARLY_ERR | \ + XILINX_VDMA_DMASR_DMA_DEC_ERR | \ + XILINX_VDMA_DMASR_DMA_SLAVE_ERR | \ + XILINX_VDMA_DMASR_DMA_INT_ERR) + +/* + * Recoverable errors are DMA Internal error, SOF Early, EOF Early + * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC + * is enabled in the h/w system. + */ +#define XILINX_VDMA_DMASR_ERR_RECOVER_MASK \ + (XILINX_VDMA_DMASR_SOF_LATE_ERR | \ + XILINX_VDMA_DMASR_EOF_EARLY_ERR | \ + XILINX_VDMA_DMASR_SOF_EARLY_ERR | \ + XILINX_VDMA_DMASR_DMA_INT_ERR) + +/* Axi VDMA Flush on Fsync bits */ +#define XILINX_VDMA_FLUSH_S2MM 3 +#define XILINX_VDMA_FLUSH_MM2S 2 +#define XILINX_VDMA_FLUSH_BOTH 1 + +/* Delay loop counter to prevent hardware failure */ +#define XILINX_VDMA_LOOP_COUNT 1000000 + +/** + * struct xilinx_vdma_desc_hw - Hardware Descriptor + * @next_desc: Next Descriptor Pointer @0x00 + * @pad1: Reserved @0x04 + * @buf_addr: Buffer address @0x08 + * @pad2: Reserved @0x0C + * @vsize: Vertical Size @0x10 + * @hsize: Horizontal Size @0x14 + * @stride: Number of bytes between the first + * pixels of each horizontal line @0x18 + */ +struct xilinx_vdma_desc_hw { + u32 next_desc; + u32 pad1; + u32 buf_addr; + u32 pad2; + u32 vsize; + u32 hsize; + u32 stride; +} __aligned(64); + +/** + * struct xilinx_vdma_tx_segment - Descriptor segment + * @hw: Hardware descriptor + * @node: Node in the descriptor segments list + * @phys: Physical address of segment + */ +struct xilinx_vdma_tx_segment { + struct xilinx_vdma_desc_hw hw; + struct list_head node; + dma_addr_t phys; +} __aligned(64); + +/** + * struct xilinx_vdma_tx_descriptor - Per Transaction structure + * @async_tx: Async transaction descriptor + * @segments: TX segments list + * @node: Node in the channel descriptors list + */ +struct xilinx_vdma_tx_descriptor { + struct dma_async_tx_descriptor async_tx; + struct list_head segments; + struct list_head node; +}; + +/** + * struct xilinx_vdma_chan - Driver specific VDMA channel structure + * @xdev: Driver specific device structure + * @ctrl_offset: Control registers offset + * @desc_offset: TX descriptor registers offset + * @lock: Descriptor operation lock + * @pending_list: Descriptors waiting + * @active_desc: Active descriptor + * @allocated_desc: Allocated descriptor + * @done_list: Complete descriptors + * @common: DMA common channel + * @desc_pool: Descriptors pool + * @dev: The dma device + * @irq: Channel IRQ + * @id: Channel ID + * @direction: Transfer direction + * @num_frms: Number of frames + * @has_sg: Support scatter transfers + * @genlock: Support genlock mode + * @err: Channel has errors + * @tasklet: Cleanup work after irq + * @config: Device configuration info + * @flush_on_fsync: Flush on Frame sync + */ +struct xilinx_vdma_chan { + struct xilinx_vdma_device *xdev; + u32 ctrl_offset; + u32 desc_offset; + spinlock_t lock; + struct list_head pending_list; + struct xilinx_vdma_tx_descriptor *active_desc; + struct xilinx_vdma_tx_descriptor *allocated_desc; + struct list_head done_list; + struct dma_chan common; + struct dma_pool *desc_pool; + struct device *dev; + int irq; + int id; + enum dma_transfer_direction direction; + int num_frms; + bool has_sg; + bool genlock; + bool err; + struct tasklet_struct tasklet; + struct xilinx_vdma_config config; + bool flush_on_fsync; +}; + +/** + * struct xilinx_vdma_device - VDMA device structure + * @regs: I/O mapped base address + * @dev: Device Structure + * @common: DMA device structure + * @chan: Driver specific VDMA channel + * @has_sg: Specifies whether Scatter-Gather is present or not + * @flush_on_fsync: Flush on frame sync + */ +struct xilinx_vdma_device { + void __iomem *regs; + struct device *dev; + struct dma_device common; + struct xilinx_vdma_chan *chan[XILINX_VDMA_MAX_CHANS_PER_DEVICE]; + bool has_sg; + u32 flush_on_fsync; +}; + +/* Macros */ +#define to_xilinx_chan(chan) \ + container_of(chan, struct xilinx_vdma_chan, common) +#define to_vdma_tx_descriptor(tx) \ + container_of(tx, struct xilinx_vdma_tx_descriptor, async_tx) + +/* IO accessors */ +static inline u32 vdma_read(struct xilinx_vdma_chan *chan, u32 reg) +{ + return ioread32(chan->xdev->regs + reg); +} + +static inline void vdma_write(struct xilinx_vdma_chan *chan, u32 reg, u32 value) +{ + iowrite32(value, chan->xdev->regs + reg); +} + +static inline void vdma_desc_write(struct xilinx_vdma_chan *chan, u32 reg, + u32 value) +{ + vdma_write(chan, chan->desc_offset + reg, value); +} + +static inline u32 vdma_ctrl_read(struct xilinx_vdma_chan *chan, u32 reg) +{ + return vdma_read(chan, chan->ctrl_offset + reg); +} + +static inline void vdma_ctrl_write(struct xilinx_vdma_chan *chan, u32 reg, + u32 value) +{ + vdma_write(chan, chan->ctrl_offset + reg, value); +} + +static inline void vdma_ctrl_clr(struct xilinx_vdma_chan *chan, u32 reg, + u32 clr) +{ + vdma_ctrl_write(chan, reg, vdma_ctrl_read(chan, reg) & ~clr); +} + +static inline void vdma_ctrl_set(struct xilinx_vdma_chan *chan, u32 reg, + u32 set) +{ + vdma_ctrl_write(chan, reg, vdma_ctrl_read(chan, reg) | set); +} + +/* ----------------------------------------------------------------------------- + * Descriptors and segments alloc and free + */ + +/** + * xilinx_vdma_alloc_tx_segment - Allocate transaction segment + * @chan: Driver specific VDMA channel + * + * Return: The allocated segment on success and NULL on failure. + */ +static struct xilinx_vdma_tx_segment * +xilinx_vdma_alloc_tx_segment(struct xilinx_vdma_chan *chan) +{ + struct xilinx_vdma_tx_segment *segment; + dma_addr_t phys; + + segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys); + if (!segment) + return NULL; + + memset(segment, 0, sizeof(*segment)); + segment->phys = phys; + + return segment; +} + +/** + * xilinx_vdma_free_tx_segment - Free transaction segment + * @chan: Driver specific VDMA channel + * @segment: VDMA transaction segment + */ +static void xilinx_vdma_free_tx_segment(struct xilinx_vdma_chan *chan, + struct xilinx_vdma_tx_segment *segment) +{ + dma_pool_free(chan->desc_pool, segment, segment->phys); +} + +/** + * xilinx_vdma_tx_descriptor - Allocate transaction descriptor + * @chan: Driver specific VDMA channel + * + * Return: The allocated descriptor on success and NULL on failure. + */ +static struct xilinx_vdma_tx_descriptor * +xilinx_vdma_alloc_tx_descriptor(struct xilinx_vdma_chan *chan) +{ + struct xilinx_vdma_tx_descriptor *desc; + unsigned long flags; + + if (chan->allocated_desc) + return chan->allocated_desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return NULL; + + spin_lock_irqsave(&chan->lock, flags); + chan->allocated_desc = desc; + spin_unlock_irqrestore(&chan->lock, flags); + + INIT_LIST_HEAD(&desc->segments); + + return desc; +} + +/** + * xilinx_vdma_free_tx_descriptor - Free transaction descriptor + * @chan: Driver specific VDMA channel + * @desc: VDMA transaction descriptor + */ +static void +xilinx_vdma_free_tx_descriptor(struct xilinx_vdma_chan *chan, + struct xilinx_vdma_tx_descriptor *desc) +{ + struct xilinx_vdma_tx_segment *segment, *next; + + if (!desc) + return; + + list_for_each_entry_safe(segment, next, &desc->segments, node) { + list_del(&segment->node); + xilinx_vdma_free_tx_segment(chan, segment); + } + + kfree(desc); +} + +/* Required functions */ + +/** + * xilinx_vdma_free_desc_list - Free descriptors list + * @chan: Driver specific VDMA channel + * @list: List to parse and delete the descriptor + */ +static void xilinx_vdma_free_desc_list(struct xilinx_vdma_chan *chan, + struct list_head *list) +{ + struct xilinx_vdma_tx_descriptor *desc, *next; + + list_for_each_entry_safe(desc, next, list, node) { + list_del(&desc->node); + xilinx_vdma_free_tx_descriptor(chan, desc); + } +} + +/** + * xilinx_vdma_free_descriptors - Free channel descriptors + * @chan: Driver specific VDMA channel + */ +static void xilinx_vdma_free_descriptors(struct xilinx_vdma_chan *chan) +{ + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + + xilinx_vdma_free_desc_list(chan, &chan->pending_list); + xilinx_vdma_free_desc_list(chan, &chan->done_list); + + xilinx_vdma_free_tx_descriptor(chan, chan->active_desc); + chan->active_desc = NULL; + + spin_unlock_irqrestore(&chan->lock, flags); +} + +/** + * xilinx_vdma_free_chan_resources - Free channel resources + * @dchan: DMA channel + */ +static void xilinx_vdma_free_chan_resources(struct dma_chan *dchan) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + + dev_dbg(chan->dev, "Free all channel resources.\n"); + + xilinx_vdma_free_descriptors(chan); + dma_pool_destroy(chan->desc_pool); + chan->desc_pool = NULL; +} + +/** + * xilinx_vdma_chan_desc_cleanup - Clean channel descriptors + * @chan: Driver specific VDMA channel + */ +static void xilinx_vdma_chan_desc_cleanup(struct xilinx_vdma_chan *chan) +{ + struct xilinx_vdma_tx_descriptor *desc, *next; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + + list_for_each_entry_safe(desc, next, &chan->done_list, node) { + dma_async_tx_callback callback; + void *callback_param; + + /* Remove from the list of running transactions */ + list_del(&desc->node); + + /* Run the link descriptor callback function */ + callback = desc->async_tx.callback; + callback_param = desc->async_tx.callback_param; + if (callback) { + spin_unlock_irqrestore(&chan->lock, flags); + callback(callback_param); + spin_lock_irqsave(&chan->lock, flags); + } + + /* Run any dependencies, then free the descriptor */ + dma_run_dependencies(&desc->async_tx); + xilinx_vdma_free_tx_descriptor(chan, desc); + } + + spin_unlock_irqrestore(&chan->lock, flags); +} + +/** + * xilinx_vdma_do_tasklet - Schedule completion tasklet + * @data: Pointer to the Xilinx VDMA channel structure + */ +static void xilinx_vdma_do_tasklet(unsigned long data) +{ + struct xilinx_vdma_chan *chan = (struct xilinx_vdma_chan *)data; + + xilinx_vdma_chan_desc_cleanup(chan); +} + +/** + * xilinx_vdma_alloc_chan_resources - Allocate channel resources + * @dchan: DMA channel + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_alloc_chan_resources(struct dma_chan *dchan) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + + /* Has this channel already been allocated? */ + if (chan->desc_pool) + return 0; + + /* + * We need the descriptor to be aligned to 64bytes + * for meeting Xilinx VDMA specification requirement. + */ + chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool", + chan->dev, + sizeof(struct xilinx_vdma_tx_segment), + __alignof__(struct xilinx_vdma_tx_segment), 0); + if (!chan->desc_pool) { + dev_err(chan->dev, + "unable to allocate channel %d descriptor pool\n", + chan->id); + return -ENOMEM; + } + + dma_cookie_init(dchan); + return 0; +} + +/** + * xilinx_vdma_tx_status - Get VDMA transaction status + * @dchan: DMA channel + * @cookie: Transaction identifier + * @txstate: Transaction state + * + * Return: DMA transaction status + */ +static enum dma_status xilinx_vdma_tx_status(struct dma_chan *dchan, + dma_cookie_t cookie, + struct dma_tx_state *txstate) +{ + return dma_cookie_status(dchan, cookie, txstate); +} + +/** + * xilinx_vdma_is_running - Check if VDMA channel is running + * @chan: Driver specific VDMA channel + * + * Return: '1' if running, '0' if not. + */ +static bool xilinx_vdma_is_running(struct xilinx_vdma_chan *chan) +{ + return !(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) & + XILINX_VDMA_DMASR_HALTED) && + (vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) & + XILINX_VDMA_DMACR_RUNSTOP); +} + +/** + * xilinx_vdma_is_idle - Check if VDMA channel is idle + * @chan: Driver specific VDMA channel + * + * Return: '1' if idle, '0' if not. + */ +static bool xilinx_vdma_is_idle(struct xilinx_vdma_chan *chan) +{ + return vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) & + XILINX_VDMA_DMASR_IDLE; +} + +/** + * xilinx_vdma_halt - Halt VDMA channel + * @chan: Driver specific VDMA channel + */ +static void xilinx_vdma_halt(struct xilinx_vdma_chan *chan) +{ + int loop = XILINX_VDMA_LOOP_COUNT; + + vdma_ctrl_clr(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP); + + /* Wait for the hardware to halt */ + do { + if (vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) & + XILINX_VDMA_DMASR_HALTED) + break; + } while (loop--); + + if (!loop) { + dev_err(chan->dev, "Cannot stop channel %p: %x\n", + chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR)); + chan->err = true; + } + + return; +} + +/** + * xilinx_vdma_start - Start VDMA channel + * @chan: Driver specific VDMA channel + */ +static void xilinx_vdma_start(struct xilinx_vdma_chan *chan) +{ + int loop = XILINX_VDMA_LOOP_COUNT; + + vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RUNSTOP); + + /* Wait for the hardware to start */ + do { + if (!(vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR) & + XILINX_VDMA_DMASR_HALTED)) + break; + } while (loop--); + + if (!loop) { + dev_err(chan->dev, "Cannot start channel %p: %x\n", + chan, vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR)); + + chan->err = true; + } + + return; +} + +/** + * xilinx_vdma_start_transfer - Starts VDMA transfer + * @chan: Driver specific channel struct pointer + */ +static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan) +{ + struct xilinx_vdma_config *config = &chan->config; + struct xilinx_vdma_tx_descriptor *desc; + unsigned long flags; + u32 reg; + struct xilinx_vdma_tx_segment *head, *tail = NULL; + + if (chan->err) + return; + + spin_lock_irqsave(&chan->lock, flags); + + /* There's already an active descriptor, bail out. */ + if (chan->active_desc) + goto out_unlock; + + if (list_empty(&chan->pending_list)) + goto out_unlock; + + desc = list_first_entry(&chan->pending_list, + struct xilinx_vdma_tx_descriptor, node); + + /* If it is SG mode and hardware is busy, cannot submit */ + if (chan->has_sg && xilinx_vdma_is_running(chan) && + !xilinx_vdma_is_idle(chan)) { + dev_dbg(chan->dev, "DMA controller still busy\n"); + goto out_unlock; + } + + /* + * If hardware is idle, then all descriptors on the running lists are + * done, start new transfers + */ + if (chan->has_sg) { + head = list_first_entry(&desc->segments, + struct xilinx_vdma_tx_segment, node); + tail = list_entry(desc->segments.prev, + struct xilinx_vdma_tx_segment, node); + + vdma_ctrl_write(chan, XILINX_VDMA_REG_CURDESC, head->phys); + } + + /* Configure the hardware using info in the config structure */ + reg = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR); + + if (config->frm_cnt_en) + reg |= XILINX_VDMA_DMACR_FRAMECNT_EN; + else + reg &= ~XILINX_VDMA_DMACR_FRAMECNT_EN; + + /* + * With SG, start with circular mode, so that BDs can be fetched. + * In direct register mode, if not parking, enable circular mode + */ + if (chan->has_sg || !config->park) + reg |= XILINX_VDMA_DMACR_CIRC_EN; + + if (config->park) + reg &= ~XILINX_VDMA_DMACR_CIRC_EN; + + vdma_ctrl_write(chan, XILINX_VDMA_REG_DMACR, reg); + + if (config->park && (config->park_frm >= 0) && + (config->park_frm < chan->num_frms)) { + if (chan->direction == DMA_MEM_TO_DEV) + vdma_write(chan, XILINX_VDMA_REG_PARK_PTR, + config->park_frm << + XILINX_VDMA_PARK_PTR_RD_REF_SHIFT); + else + vdma_write(chan, XILINX_VDMA_REG_PARK_PTR, + config->park_frm << + XILINX_VDMA_PARK_PTR_WR_REF_SHIFT); + } + + /* Start the hardware */ + xilinx_vdma_start(chan); + + if (chan->err) + goto out_unlock; + + /* Start the transfer */ + if (chan->has_sg) { + vdma_ctrl_write(chan, XILINX_VDMA_REG_TAILDESC, tail->phys); + } else { + struct xilinx_vdma_tx_segment *segment, *last = NULL; + int i = 0; + + list_for_each_entry(segment, &desc->segments, node) { + vdma_desc_write(chan, + XILINX_VDMA_REG_START_ADDRESS(i++), + segment->hw.buf_addr); + last = segment; + } + + if (!last) + goto out_unlock; + + /* HW expects these parameters to be same for one transaction */ + vdma_desc_write(chan, XILINX_VDMA_REG_HSIZE, last->hw.hsize); + vdma_desc_write(chan, XILINX_VDMA_REG_FRMDLY_STRIDE, + last->hw.stride); + vdma_desc_write(chan, XILINX_VDMA_REG_VSIZE, last->hw.vsize); + } + + list_del(&desc->node); + chan->active_desc = desc; + +out_unlock: + spin_unlock_irqrestore(&chan->lock, flags); +} + +/** + * xilinx_vdma_issue_pending - Issue pending transactions + * @dchan: DMA channel + */ +static void xilinx_vdma_issue_pending(struct dma_chan *dchan) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + + xilinx_vdma_start_transfer(chan); +} + +/** + * xilinx_vdma_complete_descriptor - Mark the active descriptor as complete + * @chan : xilinx DMA channel + * + * CONTEXT: hardirq + */ +static void xilinx_vdma_complete_descriptor(struct xilinx_vdma_chan *chan) +{ + struct xilinx_vdma_tx_descriptor *desc; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + + desc = chan->active_desc; + if (!desc) { + dev_dbg(chan->dev, "no running descriptors\n"); + goto out_unlock; + } + + dma_cookie_complete(&desc->async_tx); + list_add_tail(&desc->node, &chan->done_list); + + chan->active_desc = NULL; + +out_unlock: + spin_unlock_irqrestore(&chan->lock, flags); +} + +/** + * xilinx_vdma_reset - Reset VDMA channel + * @chan: Driver specific VDMA channel + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_reset(struct xilinx_vdma_chan *chan) +{ + int loop = XILINX_VDMA_LOOP_COUNT; + u32 tmp; + + vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, XILINX_VDMA_DMACR_RESET); + + tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) & + XILINX_VDMA_DMACR_RESET; + + /* Wait for the hardware to finish reset */ + do { + tmp = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR) & + XILINX_VDMA_DMACR_RESET; + } while (loop-- && tmp); + + if (!loop) { + dev_err(chan->dev, "reset timeout, cr %x, sr %x\n", + vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR), + vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR)); + return -ETIMEDOUT; + } + + chan->err = false; + + return 0; +} + +/** + * xilinx_vdma_chan_reset - Reset VDMA channel and enable interrupts + * @chan: Driver specific VDMA channel + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_chan_reset(struct xilinx_vdma_chan *chan) +{ + int err; + + /* Reset VDMA */ + err = xilinx_vdma_reset(chan); + if (err) + return err; + + /* Enable interrupts */ + vdma_ctrl_set(chan, XILINX_VDMA_REG_DMACR, + XILINX_VDMA_DMAXR_ALL_IRQ_MASK); + + return 0; +} + +/** + * xilinx_vdma_irq_handler - VDMA Interrupt handler + * @irq: IRQ number + * @data: Pointer to the Xilinx VDMA channel structure + * + * Return: IRQ_HANDLED/IRQ_NONE + */ +static irqreturn_t xilinx_vdma_irq_handler(int irq, void *data) +{ + struct xilinx_vdma_chan *chan = data; + u32 status; + + /* Read the status and ack the interrupts. */ + status = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMASR); + if (!(status & XILINX_VDMA_DMAXR_ALL_IRQ_MASK)) + return IRQ_NONE; + + vdma_ctrl_write(chan, XILINX_VDMA_REG_DMASR, + status & XILINX_VDMA_DMAXR_ALL_IRQ_MASK); + + if (status & XILINX_VDMA_DMASR_ERR_IRQ) { + /* + * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the + * error is recoverable, ignore it. Otherwise flag the error. + * + * Only recoverable errors can be cleared in the DMASR register, + * make sure not to write to other error bits to 1. + */ + u32 errors = status & XILINX_VDMA_DMASR_ALL_ERR_MASK; + vdma_ctrl_write(chan, XILINX_VDMA_REG_DMASR, + errors & XILINX_VDMA_DMASR_ERR_RECOVER_MASK); + + if (!chan->flush_on_fsync || + (errors & ~XILINX_VDMA_DMASR_ERR_RECOVER_MASK)) { + dev_err(chan->dev, + "Channel %p has errors %x, cdr %x tdr %x\n", + chan, errors, + vdma_ctrl_read(chan, XILINX_VDMA_REG_CURDESC), + vdma_ctrl_read(chan, XILINX_VDMA_REG_TAILDESC)); + chan->err = true; + } + } + + if (status & XILINX_VDMA_DMASR_DLY_CNT_IRQ) { + /* + * Device takes too long to do the transfer when user requires + * responsiveness. + */ + dev_dbg(chan->dev, "Inter-packet latency too long\n"); + } + + if (status & XILINX_VDMA_DMASR_FRM_CNT_IRQ) { + xilinx_vdma_complete_descriptor(chan); + xilinx_vdma_start_transfer(chan); + } + + tasklet_schedule(&chan->tasklet); + return IRQ_HANDLED; +} + +/** + * xilinx_vdma_tx_submit - Submit DMA transaction + * @tx: Async transaction descriptor + * + * Return: cookie value on success and failure value on error + */ +static dma_cookie_t xilinx_vdma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct xilinx_vdma_tx_descriptor *desc = to_vdma_tx_descriptor(tx); + struct xilinx_vdma_chan *chan = to_xilinx_chan(tx->chan); + dma_cookie_t cookie; + unsigned long flags; + int err; + + if (chan->err) { + /* + * If reset fails, need to hard reset the system. + * Channel is no longer functional + */ + err = xilinx_vdma_chan_reset(chan); + if (err < 0) + return err; + } + + spin_lock_irqsave(&chan->lock, flags); + + cookie = dma_cookie_assign(tx); + + /* Append the transaction to the pending transactions queue. */ + list_add_tail(&desc->node, &chan->pending_list); + + /* Free the allocated desc */ + chan->allocated_desc = NULL; + + spin_unlock_irqrestore(&chan->lock, flags); + + return cookie; +} + +/** + * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a + * DMA_SLAVE transaction + * @dchan: DMA channel + * @xt: Interleaved template pointer + * @flags: transfer ack flags + * + * Return: Async transaction descriptor on success and NULL on failure + */ +static struct dma_async_tx_descriptor * +xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan, + struct dma_interleaved_template *xt, + unsigned long flags) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + struct xilinx_vdma_tx_descriptor *desc; + struct xilinx_vdma_tx_segment *segment, *prev = NULL; + struct xilinx_vdma_desc_hw *hw; + + if (!is_slave_direction(xt->dir)) + return NULL; + + if (!xt->numf || !xt->sgl[0].size) + return NULL; + + /* Allocate a transaction descriptor. */ + desc = xilinx_vdma_alloc_tx_descriptor(chan); + if (!desc) + return NULL; + + dma_async_tx_descriptor_init(&desc->async_tx, &chan->common); + desc->async_tx.tx_submit = xilinx_vdma_tx_submit; + async_tx_ack(&desc->async_tx); + + /* Allocate the link descriptor from DMA pool */ + segment = xilinx_vdma_alloc_tx_segment(chan); + if (!segment) + goto error; + + /* Fill in the hardware descriptor */ + hw = &segment->hw; + hw->vsize = xt->numf; + hw->hsize = xt->sgl[0].size; + hw->stride = xt->sgl[0].icg << + XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT; + hw->stride |= chan->config.frm_dly << + XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT; + + if (xt->dir != DMA_MEM_TO_DEV) + hw->buf_addr = xt->dst_start; + else + hw->buf_addr = xt->src_start; + + /* Link the previous next descriptor to current */ + prev = list_last_entry(&desc->segments, + struct xilinx_vdma_tx_segment, node); + prev->hw.next_desc = segment->phys; + + /* Insert the segment into the descriptor segments list. */ + list_add_tail(&segment->node, &desc->segments); + + prev = segment; + + /* Link the last hardware descriptor with the first. */ + segment = list_first_entry(&desc->segments, + struct xilinx_vdma_tx_segment, node); + prev->hw.next_desc = segment->phys; + + return &desc->async_tx; + +error: + xilinx_vdma_free_tx_descriptor(chan, desc); + return NULL; +} + +/** + * xilinx_vdma_terminate_all - Halt the channel and free descriptors + * @chan: Driver specific VDMA Channel pointer + */ +static void xilinx_vdma_terminate_all(struct xilinx_vdma_chan *chan) +{ + /* Halt the DMA engine */ + xilinx_vdma_halt(chan); + + /* Remove and free all of the descriptors in the lists */ + xilinx_vdma_free_descriptors(chan); +} + +/** + * xilinx_vdma_channel_set_config - Configure VDMA channel + * Run-time configuration for Axi VDMA, supports: + * . halt the channel + * . configure interrupt coalescing and inter-packet delay threshold + * . start/stop parking + * . enable genlock + * + * @dchan: DMA channel + * @cfg: VDMA device configuration pointer + * + * Return: '0' on success and failure value on error + */ +int xilinx_vdma_channel_set_config(struct dma_chan *dchan, + struct xilinx_vdma_config *cfg) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + u32 dmacr; + + if (cfg->reset) + return xilinx_vdma_chan_reset(chan); + + dmacr = vdma_ctrl_read(chan, XILINX_VDMA_REG_DMACR); + + chan->config.frm_dly = cfg->frm_dly; + chan->config.park = cfg->park; + + /* genlock settings */ + chan->config.gen_lock = cfg->gen_lock; + chan->config.master = cfg->master; + + if (cfg->gen_lock && chan->genlock) { + dmacr |= XILINX_VDMA_DMACR_GENLOCK_EN; + dmacr |= cfg->master << XILINX_VDMA_DMACR_MASTER_SHIFT; + } + + chan->config.frm_cnt_en = cfg->frm_cnt_en; + if (cfg->park) + chan->config.park_frm = cfg->park_frm; + else + chan->config.park_frm = -1; + + chan->config.coalesc = cfg->coalesc; + chan->config.delay = cfg->delay; + + if (cfg->coalesc <= XILINX_VDMA_DMACR_FRAME_COUNT_MAX) { + dmacr |= cfg->coalesc << XILINX_VDMA_DMACR_FRAME_COUNT_SHIFT; + chan->config.coalesc = cfg->coalesc; + } + + if (cfg->delay <= XILINX_VDMA_DMACR_DELAY_MAX) { + dmacr |= cfg->delay << XILINX_VDMA_DMACR_DELAY_SHIFT; + chan->config.delay = cfg->delay; + } + + /* FSync Source selection */ + dmacr &= ~XILINX_VDMA_DMACR_FSYNCSRC_MASK; + dmacr |= cfg->ext_fsync << XILINX_VDMA_DMACR_FSYNCSRC_SHIFT; + + vdma_ctrl_write(chan, XILINX_VDMA_REG_DMACR, dmacr); + + return 0; +} +EXPORT_SYMBOL(xilinx_vdma_channel_set_config); + +/** + * xilinx_vdma_device_control - Configure DMA channel of the device + * @dchan: DMA Channel pointer + * @cmd: DMA control command + * @arg: Channel configuration + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_device_control(struct dma_chan *dchan, + enum dma_ctrl_cmd cmd, unsigned long arg) +{ + struct xilinx_vdma_chan *chan = to_xilinx_chan(dchan); + + if (cmd != DMA_TERMINATE_ALL) + return -ENXIO; + + xilinx_vdma_terminate_all(chan); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Probe and remove + */ + +/** + * xilinx_vdma_chan_remove - Per Channel remove function + * @chan: Driver specific VDMA channel + */ +static void xilinx_vdma_chan_remove(struct xilinx_vdma_chan *chan) +{ + /* Disable all interrupts */ + vdma_ctrl_clr(chan, XILINX_VDMA_REG_DMACR, + XILINX_VDMA_DMAXR_ALL_IRQ_MASK); + + if (chan->irq > 0) + free_irq(chan->irq, chan); + + tasklet_kill(&chan->tasklet); + + list_del(&chan->common.device_node); +} + +/** + * xilinx_vdma_chan_probe - Per Channel Probing + * It get channel features from the device tree entry and + * initialize special channel handling routines + * + * @xdev: Driver specific device structure + * @node: Device node + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_chan_probe(struct xilinx_vdma_device *xdev, + struct device_node *node) +{ + struct xilinx_vdma_chan *chan; + bool has_dre = false; + u32 value, width; + int err; + + /* Allocate and initialize the channel structure */ + chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL); + if (!chan) + return -ENOMEM; + + chan->dev = xdev->dev; + chan->xdev = xdev; + chan->has_sg = xdev->has_sg; + + spin_lock_init(&chan->lock); + INIT_LIST_HEAD(&chan->pending_list); + INIT_LIST_HEAD(&chan->done_list); + + /* Retrieve the channel properties from the device tree */ + has_dre = of_property_read_bool(node, "xlnx,include-dre"); + + chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode"); + + err = of_property_read_u32(node, "xlnx,datawidth", &value); + if (err) { + dev_err(xdev->dev, "missing xlnx,datawidth property\n"); + return err; + } + width = value >> 3; /* Convert bits to bytes */ + + /* If data width is greater than 8 bytes, DRE is not in hw */ + if (width > 8) + has_dre = false; + + if (!has_dre) + xdev->common.copy_align = fls(width - 1); + + if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel")) { + chan->direction = DMA_MEM_TO_DEV; + chan->id = 0; + + chan->ctrl_offset = XILINX_VDMA_MM2S_CTRL_OFFSET; + chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET; + + if (xdev->flush_on_fsync == XILINX_VDMA_FLUSH_BOTH || + xdev->flush_on_fsync == XILINX_VDMA_FLUSH_MM2S) + chan->flush_on_fsync = true; + } else if (of_device_is_compatible(node, + "xlnx,axi-vdma-s2mm-channel")) { + chan->direction = DMA_DEV_TO_MEM; + chan->id = 1; + + chan->ctrl_offset = XILINX_VDMA_S2MM_CTRL_OFFSET; + chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET; + + if (xdev->flush_on_fsync == XILINX_VDMA_FLUSH_BOTH || + xdev->flush_on_fsync == XILINX_VDMA_FLUSH_S2MM) + chan->flush_on_fsync = true; + } else { + dev_err(xdev->dev, "Invalid channel compatible node\n"); + return -EINVAL; + } + + /* Request the interrupt */ + chan->irq = irq_of_parse_and_map(node, 0); + err = request_irq(chan->irq, xilinx_vdma_irq_handler, IRQF_SHARED, + "xilinx-vdma-controller", chan); + if (err) { + dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq); + return err; + } + + /* Initialize the tasklet */ + tasklet_init(&chan->tasklet, xilinx_vdma_do_tasklet, + (unsigned long)chan); + + /* + * Initialize the DMA channel and add it to the DMA engine channels + * list. + */ + chan->common.device = &xdev->common; + + list_add_tail(&chan->common.device_node, &xdev->common.channels); + xdev->chan[chan->id] = chan; + + /* Reset the channel */ + err = xilinx_vdma_chan_reset(chan); + if (err < 0) { + dev_err(xdev->dev, "Reset channel failed\n"); + return err; + } + + return 0; +} + +/** + * of_dma_xilinx_xlate - Translation function + * @dma_spec: Pointer to DMA specifier as found in the device tree + * @ofdma: Pointer to DMA controller data + * + * Return: DMA channel pointer on success and NULL on error + */ +static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct xilinx_vdma_device *xdev = ofdma->of_dma_data; + int chan_id = dma_spec->args[0]; + + if (chan_id >= XILINX_VDMA_MAX_CHANS_PER_DEVICE) + return NULL; + + return dma_get_slave_channel(&xdev->chan[chan_id]->common); +} + +/** + * xilinx_vdma_probe - Driver probe function + * @pdev: Pointer to the platform_device structure + * + * Return: '0' on success and failure value on error + */ +static int xilinx_vdma_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct xilinx_vdma_device *xdev; + struct device_node *child; + struct resource *io; + u32 num_frames; + int i, err; + + /* Allocate and initialize the DMA engine structure */ + xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL); + if (!xdev) + return -ENOMEM; + + xdev->dev = &pdev->dev; + + /* Request and map I/O memory */ + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + xdev->regs = devm_ioremap_resource(&pdev->dev, io); + if (IS_ERR(xdev->regs)) + return PTR_ERR(xdev->regs); + + /* Retrieve the DMA engine properties from the device tree */ + xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg"); + + err = of_property_read_u32(node, "xlnx,num-fstores", &num_frames); + if (err < 0) { + dev_err(xdev->dev, "missing xlnx,num-fstores property\n"); + return err; + } + + err = of_property_read_u32(node, "xlnx,flush-fsync", + &xdev->flush_on_fsync); + if (err < 0) + dev_warn(xdev->dev, "missing xlnx,flush-fsync property\n"); + + /* Initialize the DMA engine */ + xdev->common.dev = &pdev->dev; + + INIT_LIST_HEAD(&xdev->common.channels); + dma_cap_set(DMA_SLAVE, xdev->common.cap_mask); + dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask); + + xdev->common.device_alloc_chan_resources = + xilinx_vdma_alloc_chan_resources; + xdev->common.device_free_chan_resources = + xilinx_vdma_free_chan_resources; + xdev->common.device_prep_interleaved_dma = + xilinx_vdma_dma_prep_interleaved; + xdev->common.device_control = xilinx_vdma_device_control; + xdev->common.device_tx_status = xilinx_vdma_tx_status; + xdev->common.device_issue_pending = xilinx_vdma_issue_pending; + + platform_set_drvdata(pdev, xdev); + + /* Initialize the channels */ + for_each_child_of_node(node, child) { + err = xilinx_vdma_chan_probe(xdev, child); + if (err < 0) + goto error; + } + + for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++) + if (xdev->chan[i]) + xdev->chan[i]->num_frms = num_frames; + + /* Register the DMA engine with the core */ + dma_async_device_register(&xdev->common); + + err = of_dma_controller_register(node, of_dma_xilinx_xlate, + xdev); + if (err < 0) { + dev_err(&pdev->dev, "Unable to register DMA to DT\n"); + dma_async_device_unregister(&xdev->common); + goto error; + } + + dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n"); + + return 0; + +error: + for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++) + if (xdev->chan[i]) + xilinx_vdma_chan_remove(xdev->chan[i]); + + return err; +} + +/** + * xilinx_vdma_remove - Driver remove function + * @pdev: Pointer to the platform_device structure + * + * Return: Always '0' + */ +static int xilinx_vdma_remove(struct platform_device *pdev) +{ + struct xilinx_vdma_device *xdev = platform_get_drvdata(pdev); + int i; + + of_dma_controller_free(pdev->dev.of_node); + + dma_async_device_unregister(&xdev->common); + + for (i = 0; i < XILINX_VDMA_MAX_CHANS_PER_DEVICE; i++) + if (xdev->chan[i]) + xilinx_vdma_chan_remove(xdev->chan[i]); + + return 0; +} + +static const struct of_device_id xilinx_vdma_of_ids[] = { + { .compatible = "xlnx,axi-vdma-1.00.a",}, + {} +}; + +static struct platform_driver xilinx_vdma_driver = { + .driver = { + .name = "xilinx-vdma", + .owner = THIS_MODULE, + .of_match_table = xilinx_vdma_of_ids, + }, + .probe = xilinx_vdma_probe, + .remove = xilinx_vdma_remove, +}; + +module_platform_driver(xilinx_vdma_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx VDMA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/amba/xilinx_dma.h b/include/linux/amba/xilinx_dma.h new file mode 100644 index 000000000000..34b98f276ed0 --- /dev/null +++ b/include/linux/amba/xilinx_dma.h @@ -0,0 +1,47 @@ +/* + * Xilinx DMA Engine drivers support header file + * + * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DMA_XILINX_DMA_H +#define __DMA_XILINX_DMA_H + +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> + +/** + * struct xilinx_vdma_config - VDMA Configuration structure + * @frm_dly: Frame delay + * @gen_lock: Whether in gen-lock mode + * @master: Master that it syncs to + * @frm_cnt_en: Enable frame count enable + * @park: Whether wants to park + * @park_frm: Frame to park on + * @coalesc: Interrupt coalescing threshold + * @delay: Delay counter + * @reset: Reset Channel + * @ext_fsync: External Frame Sync source + */ +struct xilinx_vdma_config { + int frm_dly; + int gen_lock; + int master; + int frm_cnt_en; + int park; + int park_frm; + int coalesc; + int delay; + int reset; + int ext_fsync; +}; + +int xilinx_vdma_channel_set_config(struct dma_chan *dchan, + struct xilinx_vdma_config *cfg); + +#endif diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 72cb0ddb9678..d2c5cc7c583c 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -292,7 +292,7 @@ struct dma_chan_dev { }; /** - * enum dma_slave_buswidth - defines bus with of the DMA slave + * enum dma_slave_buswidth - defines bus width of the DMA slave * device, source or target buses */ enum dma_slave_buswidth { diff --git a/include/linux/shdma-base.h b/include/linux/shdma-base.h index f92c0a43c54c..abdf1f229dc3 100644 --- a/include/linux/shdma-base.h +++ b/include/linux/shdma-base.h @@ -54,6 +54,7 @@ struct shdma_desc { dma_cookie_t cookie; int chunks; int mark; + bool cyclic; /* used as cyclic transfer */ }; struct shdma_chan { |