summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/usb/URB.txt74
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/ppc/syslib/ppc85xx_setup.c8
-rw-r--r--drivers/base/class.c13
-rw-r--r--drivers/base/dd.c3
-rw-r--r--drivers/block/ub.c55
-rw-r--r--drivers/net/bonding/bond_main.c3
-rw-r--r--drivers/net/r8169.c4
-rw-r--r--drivers/net/skge.c194
-rw-r--r--drivers/net/skge.h2
-rw-r--r--drivers/pci/hotplug.c4
-rw-r--r--drivers/pci/hotplug/rpadlpar_sysfs.c4
-rw-r--r--drivers/pci/hotplug/sgi_hotplug.c6
-rw-r--r--drivers/pci/pci-sysfs.c2
-rw-r--r--drivers/pci/probe.c4
-rw-r--r--drivers/s390/cio/ccwgroup.c2
-rw-r--r--drivers/usb/core/message.c2
-rw-r--r--drivers/usb/core/usb.c6
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c4
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.h8
-rw-r--r--drivers/usb/host/sl811-hcd.c16
-rw-r--r--drivers/usb/net/pegasus.c29
-rw-r--r--drivers/usb/serial/airprime.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c8
-rw-r--r--drivers/usb/serial/option.c11
-rw-r--r--include/linux/device.h5
26 files changed, 252 insertions, 220 deletions
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index d59b95cc6f1b..a49e5f2c2b46 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -1,5 +1,6 @@
Revised: 2000-Dec-05.
Again: 2002-Jul-06
+Again: 2005-Sep-19
NOTE:
@@ -18,8 +19,8 @@ called USB Request Block, or URB for short.
and deliver the data and status back.
- Execution of an URB is inherently an asynchronous operation, i.e. the
- usb_submit_urb(urb) call returns immediately after it has successfully queued
- the requested action.
+ usb_submit_urb(urb) call returns immediately after it has successfully
+ queued the requested action.
- Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time.
@@ -94,8 +95,9 @@ To free an URB, use
void usb_free_urb(struct urb *urb)
-You may not free an urb that you've submitted, but which hasn't yet been
-returned to you in a completion callback.
+You may free an urb that you've submitted, but which hasn't yet been
+returned to you in a completion callback. It will automatically be
+deallocated when it is no longer in use.
1.4. What has to be filled in?
@@ -145,30 +147,36 @@ to get seamless ISO streaming.
1.6. How to cancel an already running URB?
-For an URB which you've submitted, but which hasn't been returned to
-your driver by the host controller, call
+There are two ways to cancel an URB you've submitted but which hasn't
+been returned to your driver yet. For an asynchronous cancel, call
int usb_unlink_urb(struct urb *urb)
It removes the urb from the internal list and frees all allocated
-HW descriptors. The status is changed to reflect unlinking. After
-usb_unlink_urb() returns with that status code, you can free the URB
-with usb_free_urb().
+HW descriptors. The status is changed to reflect unlinking. Note
+that the URB will not normally have finished when usb_unlink_urb()
+returns; you must still wait for the completion handler to be called.
-There is also an asynchronous unlink mode. To use this, set the
-the URB_ASYNC_UNLINK flag in urb->transfer flags before calling
-usb_unlink_urb(). When using async unlinking, the URB will not
-normally be unlinked when usb_unlink_urb() returns. Instead, wait
-for the completion handler to be called.
+To cancel an URB synchronously, call
+
+ void usb_kill_urb(struct urb *urb)
+
+It does everything usb_unlink_urb does, and in addition it waits
+until after the URB has been returned and the completion handler
+has finished. It also marks the URB as temporarily unusable, so
+that if the completion handler or anyone else tries to resubmit it
+they will get a -EPERM error. Thus you can be sure that when
+usb_kill_urb() returns, the URB is totally idle.
1.7. What about the completion handler?
The handler is of the following type:
- typedef void (*usb_complete_t)(struct urb *);
+ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *)
-i.e. it gets just the URB that caused the completion call.
+I.e., it gets the URB that caused the completion call, plus the
+register values at the time of the corresponding interrupt (if any).
In the completion handler, you should have a look at urb->status to
detect any USB errors. Since the context parameter is included in the URB,
you can pass information to the completion handler.
@@ -176,17 +184,11 @@ you can pass information to the completion handler.
Note that even when an error (or unlink) is reported, data may have been
transferred. That's because USB transfers are packetized; it might take
sixteen packets to transfer your 1KByte buffer, and ten of them might
-have transferred succesfully before the completion is called.
+have transferred succesfully before the completion was called.
NOTE: ***** WARNING *****
-Don't use urb->dev field in your completion handler; it's cleared
-as part of giving urbs back to drivers. (Addressing an issue with
-ownership of periodic URBs, which was otherwise ambiguous.) Instead,
-use urb->context to hold all the data your driver needs.
-
-NOTE: ***** WARNING *****
-Also, NEVER SLEEP IN A COMPLETION HANDLER. These are normally called
+NEVER SLEEP IN A COMPLETION HANDLER. These are normally called
during hardware interrupt processing. If you can, defer substantial
work to a tasklet (bottom half) to keep system latencies low. You'll
probably need to use spinlocks to protect data structures you manipulate
@@ -229,24 +231,10 @@ ISO data with some other event stream.
Interrupt transfers, like isochronous transfers, are periodic, and happen
in intervals that are powers of two (1, 2, 4 etc) units. Units are frames
for full and low speed devices, and microframes for high speed ones.
-
-Currently, after you submit one interrupt URB, that urb is owned by the
-host controller driver until you cancel it with usb_unlink_urb(). You
-may unlink interrupt urbs in their completion handlers, if you need to.
-
-After a transfer completion is called, the URB is automagically resubmitted.
-THIS BEHAVIOR IS EXPECTED TO BE REMOVED!!
-
-Interrupt transfers may only send (or receive) the "maxpacket" value for
-the given interrupt endpoint; if you need more data, you will need to
-copy that data out of (or into) another buffer. Similarly, you can't
-queue interrupt transfers.
-THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!!
-
-Note that this automagic resubmission model does make it awkward to use
-interrupt OUT transfers. The portable solution involves unlinking those
-OUT urbs after the data is transferred, and perhaps submitting a final
-URB for a short packet.
-
The usb_submit_urb() call modifies urb->interval to the implemented interval
value that is less than or equal to the requested interval value.
+
+In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically
+restarted when they complete. They end when the completion handler is
+called, just like other URBs. If you want an interrupt URB to be restarted,
+your completion handler must resubmit it.
diff --git a/MAINTAINERS b/MAINTAINERS
index ade7415d2467..78aca12101a0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1063,8 +1063,6 @@ M: wli@holomorphy.com
S: Maintained
I2C SUBSYSTEM
-P: Greg Kroah-Hartman
-M: greg@kroah.com
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index b7242f1bd931..832b8bf99ae7 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -184,8 +184,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
- /* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
- pci->potar2 = 0x00000000;
+ /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
+ pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
@@ -235,8 +235,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
- /* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
- pci->potar2 = 0x00000000;
+ /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
+ pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 3b112e3542f8..ce23dc8c18c5 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -669,6 +669,7 @@ void class_device_destroy(struct class *cls, dev_t devt)
int class_device_rename(struct class_device *class_dev, char *new_name)
{
int error = 0;
+ char *old_class_name = NULL, *new_class_name = NULL;
class_dev = class_device_get(class_dev);
if (!class_dev)
@@ -677,12 +678,24 @@ int class_device_rename(struct class_device *class_dev, char *new_name)
pr_debug("CLASS: renaming '%s' to '%s'\n", class_dev->class_id,
new_name);
+ if (class_dev->dev)
+ old_class_name = make_class_name(class_dev);
+
strlcpy(class_dev->class_id, new_name, KOBJ_NAME_LEN);
error = kobject_rename(&class_dev->kobj, new_name);
+ if (class_dev->dev) {
+ new_class_name = make_class_name(class_dev);
+ sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
+ new_class_name);
+ sysfs_remove_link(&class_dev->dev->kobj, old_class_name);
+ }
class_device_put(class_dev);
+ kfree(old_class_name);
+ kfree(new_class_name);
+
return error;
}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index d5bbce38282f..3565e9795301 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -40,6 +40,9 @@
*/
void device_bind_driver(struct device * dev)
{
+ if (klist_node_attached(&dev->knode_driver))
+ return;
+
pr_debug("bound device '%s' to driver '%s'\n",
dev->bus_id, dev->driver->name);
klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index aa0bf7ee008d..ed4d5006fe62 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -172,7 +172,7 @@ struct bulk_cs_wrap {
*/
struct ub_dev;
-#define UB_MAX_REQ_SG 4
+#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
#define UB_MAX_SECTORS 64
/*
@@ -387,7 +387,7 @@ struct ub_dev {
struct bulk_cs_wrap work_bcs;
struct usb_ctrlrequest work_cr;
- int sg_stat[UB_MAX_REQ_SG+1];
+ int sg_stat[6];
struct ub_scsi_trace tr;
};
@@ -525,12 +525,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
"qlen %d qmax %d\n",
sc->cmd_queue.qlen, sc->cmd_queue.qmax);
cnt += sprintf(page + cnt,
- "sg %d %d %d %d %d\n",
+ "sg %d %d %d %d %d .. %d\n",
sc->sg_stat[0],
sc->sg_stat[1],
sc->sg_stat[2],
sc->sg_stat[3],
- sc->sg_stat[4]);
+ sc->sg_stat[4],
+ sc->sg_stat[5]);
list_for_each (p, &sc->luns) {
lun = list_entry(p, struct ub_lun, link);
@@ -835,7 +836,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
/*
* build the command
@@ -891,7 +892,7 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
return -1;
}
cmd->nsg = n_elem;
- sc->sg_stat[n_elem]++;
+ sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
cmd->cdb_len = rq->cmd_len;
@@ -1010,7 +1011,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->send_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
/* Fill what we shouldn't be filling, because usb-storage did so. */
sc->work_urb.actual_length = 0;
@@ -1019,7 +1019,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
return rc;
}
@@ -1190,11 +1189,9 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
if (urb->status != 0) {
- printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
goto Bad_End;
}
if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
- printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
/* XXX Must do reset here to unconfuse the device */
goto Bad_End;
}
@@ -1395,14 +1392,12 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
page_address(sg->page) + sg->offset, sg->length,
ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
@@ -1442,7 +1437,6 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
sc->last_pipe = sc->recv_bulk_pipe;
usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
&sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -1563,7 +1557,6 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -2000,17 +1993,16 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
(unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
if (rc == -EPIPE) {
- printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
sc->name); /* P3 */
} else {
- printk(KERN_WARNING
+ printk(KERN_NOTICE
"%s: Unable to submit GetMaxLUN (%d)\n",
sc->name, rc);
}
@@ -2028,6 +2020,18 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
+ if ((rc = sc->work_urb.status) < 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_NOTICE
+ "%s: Error at GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_io;
+ }
+
if (sc->work_urb.actual_length != 1) {
printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
sc->work_urb.actual_length); /* P3 */
@@ -2048,6 +2052,7 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
kfree(p);
return nluns;
+err_io:
err_submit:
kfree(p);
err_alloc:
@@ -2080,7 +2085,6 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
(unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
- sc->work_urb.transfer_flags = 0;
sc->work_urb.actual_length = 0;
sc->work_urb.error_count = 0;
sc->work_urb.status = 0;
@@ -2213,8 +2217,10 @@ static int ub_probe(struct usb_interface *intf,
* This is needed to clear toggles. It is a problem only if we do
* `rmmod ub && modprobe ub` without disconnects, but we like that.
*/
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
/*
* The way this is used by the startup code is a little specific.
@@ -2241,10 +2247,10 @@ static int ub_probe(struct usb_interface *intf,
for (i = 0; i < 3; i++) {
if ((rc = ub_sync_getmaxlun(sc)) < 0) {
/*
- * Some devices (i.e. Iomega Zip100) need this --
- * apparently the bulk pipes get STALLed when the
- * GetMaxLUN request is processed.
- * XXX I have a ZIP-100, verify it does this.
+ * This segment is taken from usb-storage. They say
+ * that ZIP-100 needs this, but my own ZIP-100 works
+ * fine without this.
+ * Still, it does not seem to hurt anything.
*/
if (rc == -EPIPE) {
ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
@@ -2313,7 +2319,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
disk->private_data = lun;
- disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
+ disk->driverfs_dev = &sc->intf->dev;
rc = -ENOMEM;
if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
@@ -2466,9 +2472,6 @@ static int __init ub_init(void)
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
devfs_mk_dir(DEVFS_NAME);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 90449a0f2a6c..6d00c3de1a83 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1653,7 +1653,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
int old_features = bond_dev->features;
int res = 0;
- if (slave_dev->do_ioctl == NULL) {
+ if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
+ slave_dev->do_ioctl == NULL) {
printk(KERN_WARNING DRV_NAME
": Warning : no link monitoring support for %s\n",
slave_dev->name);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index cbc60ce365cb..40c40eba2581 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -100,11 +100,11 @@ VERSION 2.2LK <2005/01/25>
#ifdef CONFIG_R8169_NAPI
#define rtl8169_rx_skb netif_receive_skb
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
+#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
#define rtl8169_rx_quota(count, quota) min(count, quota)
#else
#define rtl8169_rx_skb netif_rx
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
+#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
#define rtl8169_rx_quota(count, quota) count
#endif
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 7ce734ec6ba8..189203c95330 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
@@ -105,41 +105,28 @@ static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 };
-/* Don't need to look at whole 16K.
- * last interesting register is descriptor poll timer.
- */
-#define SKGE_REGS_LEN (29*128)
-
static int skge_get_regs_len(struct net_device *dev)
{
- return SKGE_REGS_LEN;
+ return 0x4000;
}
/*
- * Returns copy of control register region
- * I/O region is divided into banks and certain regions are unreadable
+ * Returns copy of whole control register region
+ * Note: skip RAM address register because accessing it will
+ * cause bus hangs!
*/
static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *p)
{
const struct skge_port *skge = netdev_priv(dev);
- unsigned long offs;
const void __iomem *io = skge->hw->regs;
- static const unsigned long bankmap
- = (1<<0) | (1<<2) | (1<<8) | (1<<9)
- | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16)
- | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23)
- | (1<<24) | (1<<25) | (1<<26) | (1<<27) | (1<<28);
regs->version = 1;
- for (offs = 0; offs < regs->len; offs += 128) {
- u32 len = min_t(u32, 128, regs->len - offs);
+ memset(p, 0, regs->len);
+ memcpy_fromio(p, io, B3_RAM_ADDR);
- if (bankmap & (1<<(offs/128)))
- memcpy_fromio(p + offs, io + offs, len);
- else
- memset(p + offs, 0, len);
- }
+ memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
+ regs->len - B3_RI_WTO_R1);
}
/* Wake on Lan only supported on Yukon chps with rev 1 or above */
@@ -776,17 +763,6 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base)
return 0;
}
-static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size)
-{
- struct sk_buff *skb = dev_alloc_skb(size);
-
- if (likely(skb)) {
- skb->dev = dev;
- skb_reserve(skb, NET_IP_ALIGN);
- }
- return skb;
-}
-
/* Allocate and setup a new buffer for receiving */
static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
struct sk_buff *skb, unsigned int bufsize)
@@ -859,16 +835,17 @@ static int skge_rx_fill(struct skge_port *skge)
{
struct skge_ring *ring = &skge->rx_ring;
struct skge_element *e;
- unsigned int bufsize = skge->rx_buf_size;
e = ring->start;
do {
- struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize);
+ struct sk_buff *skb;
+ skb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
if (!skb)
return -ENOMEM;
- skge_rx_setup(skge, e, skb, bufsize);
+ skb_reserve(skb, NET_IP_ALIGN);
+ skge_rx_setup(skge, e, skb, skge->rx_buf_size);
} while ( (e = e->next) != ring->start);
ring->to_clean = ring->start;
@@ -2443,6 +2420,14 @@ static void yukon_set_multicast(struct net_device *dev)
gma_write16(hw, port, GM_RX_CTRL, reg);
}
+static inline u16 phy_length(const struct skge_hw *hw, u32 status)
+{
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ return status >> XMR_FS_LEN_SHIFT;
+ else
+ return status >> GMR_FS_LEN_SHIFT;
+}
+
static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
{
if (hw->chip_id == CHIP_ID_GENESIS)
@@ -2452,80 +2437,99 @@ static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
(status & GMR_FS_RX_OK) == 0;
}
-static void skge_rx_error(struct skge_port *skge, int slot,
- u32 control, u32 status)
-{
- if (netif_msg_rx_err(skge))
- printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
- skge->netdev->name, slot, control, status);
-
- if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
- skge->net_stats.rx_length_errors++;
- else if (skge->hw->chip_id == CHIP_ID_GENESIS) {
- if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
- skge->net_stats.rx_length_errors++;
- if (status & XMR_FS_FRA_ERR)
- skge->net_stats.rx_frame_errors++;
- if (status & XMR_FS_FCS_ERR)
- skge->net_stats.rx_crc_errors++;
- } else {
- if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
- skge->net_stats.rx_length_errors++;
- if (status & GMR_FS_FRAGMENT)
- skge->net_stats.rx_frame_errors++;
- if (status & GMR_FS_CRC_ERR)
- skge->net_stats.rx_crc_errors++;
- }
-}
/* Get receive buffer from descriptor.
* Handles copy of small buffers and reallocation failures
*/
static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
struct skge_element *e,
- unsigned int len)
+ u32 control, u32 status, u16 csum)
{
- struct sk_buff *nskb, *skb;
+ struct sk_buff *skb;
+ u16 len = control & BMU_BBC;
+
+ if (unlikely(netif_msg_rx_status(skge)))
+ printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
+ skge->netdev->name, e - skge->rx_ring.start,
+ status, len);
+
+ if (len > skge->rx_buf_size)
+ goto error;
+
+ if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
+ goto error;
+
+ if (bad_phy_status(skge->hw, status))
+ goto error;
+
+ if (phy_length(skge->hw, status) != len)
+ goto error;
if (len < RX_COPY_THRESHOLD) {
- nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN);
- if (unlikely(!nskb))
- return NULL;
+ skb = dev_alloc_skb(len + 2);
+ if (!skb)
+ goto resubmit;
+ skb_reserve(skb, 2);
pci_dma_sync_single_for_cpu(skge->hw->pdev,
pci_unmap_addr(e, mapaddr),
len, PCI_DMA_FROMDEVICE);
- memcpy(nskb->data, e->skb->data, len);
+ memcpy(skb->data, e->skb->data, len);
pci_dma_sync_single_for_device(skge->hw->pdev,
pci_unmap_addr(e, mapaddr),
len, PCI_DMA_FROMDEVICE);
-
- if (skge->rx_csum) {
- struct skge_rx_desc *rd = e->desc;
- nskb->csum = le16_to_cpu(rd->csum2);
- nskb->ip_summed = CHECKSUM_HW;
- }
skge_rx_reuse(e, skge->rx_buf_size);
- return nskb;
} else {
- nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size);
- if (unlikely(!nskb))
- return NULL;
+ struct sk_buff *nskb;
+ nskb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
+ if (!nskb)
+ goto resubmit;
pci_unmap_single(skge->hw->pdev,
pci_unmap_addr(e, mapaddr),
pci_unmap_len(e, maplen),
PCI_DMA_FROMDEVICE);
skb = e->skb;
- if (skge->rx_csum) {
- struct skge_rx_desc *rd = e->desc;
- skb->csum = le16_to_cpu(rd->csum2);
- skb->ip_summed = CHECKSUM_HW;
- }
-
+ prefetch(skb->data);
skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
- return skb;
}
+
+ skb_put(skb, len);
+ skb->dev = skge->netdev;
+ if (skge->rx_csum) {
+ skb->csum = csum;
+ skb->ip_summed = CHECKSUM_HW;
+ }
+
+ skb->protocol = eth_type_trans(skb, skge->netdev);
+
+ return skb;
+error:
+
+ if (netif_msg_rx_err(skge))
+ printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n",
+ skge->netdev->name, e - skge->rx_ring.start,
+ control, status);
+
+ if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+ if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
+ skge->net_stats.rx_length_errors++;
+ if (status & XMR_FS_FRA_ERR)
+ skge->net_stats.rx_frame_errors++;
+ if (status & XMR_FS_FCS_ERR)
+ skge->net_stats.rx_crc_errors++;
+ } else {
+ if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
+ skge->net_stats.rx_length_errors++;
+ if (status & GMR_FS_FRAGMENT)
+ skge->net_stats.rx_frame_errors++;
+ if (status & GMR_FS_CRC_ERR)
+ skge->net_stats.rx_crc_errors++;
+ }
+
+resubmit:
+ skge_rx_reuse(e, skge->rx_buf_size);
+ return NULL;
}
@@ -2541,32 +2545,16 @@ static int skge_poll(struct net_device *dev, int *budget)
for (e = ring->to_clean; work_done < to_do; e = e->next) {
struct skge_rx_desc *rd = e->desc;
struct sk_buff *skb;
- u32 control, len, status;
+ u32 control;
rmb();
control = rd->control;
if (control & BMU_OWN)
break;
- len = control & BMU_BBC;
- status = rd->status;
-
- if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
- || bad_phy_status(hw, status))) {
- skge_rx_error(skge, e - ring->start, control, status);
- skge_rx_reuse(e, skge->rx_buf_size);
- continue;
- }
-
- if (netif_msg_rx_status(skge))
- printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
- dev->name, e - ring->start, rd->status, len);
-
- skb = skge_rx_get(skge, e, len);
+ skb = skge_rx_get(skge, e, control, rd->status,
+ le16_to_cpu(rd->csum2));
if (likely(skb)) {
- skb_put(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
-
dev->last_rx = jiffies;
netif_receive_skb(skb);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index efbf98c675d2..72c175b87a5a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -953,6 +953,7 @@ enum {
*/
enum {
XMR_FS_LEN = 0x3fff<<18, /* Bit 31..18: Rx Frame Length */
+ XMR_FS_LEN_SHIFT = 18,
XMR_FS_2L_VLAN = 1<<17, /* Bit 17: tagged wh 2Lev VLAN ID*/
XMR_FS_1_VLAN = 1<<16, /* Bit 16: tagged wh 1ev VLAN ID*/
XMR_FS_BC = 1<<15, /* Bit 15: Broadcast Frame */
@@ -1868,6 +1869,7 @@ enum {
/* Receive Frame Status Encoding */
enum {
GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */
+ GMR_FS_LEN_SHIFT = 16,
GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */
GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */
GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 10444988a10b..e1743be31909 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -7,7 +7,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
{
struct pci_dev *pdev;
- char *scratch;
int i = 0;
int length = 0;
@@ -18,9 +17,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
if (!pdev)
return -ENODEV;
- scratch = buffer;
-
-
if (add_hotplug_env_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"PCI_CLASS=%04X", pdev->class))
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 752e6513c447..db69be85b458 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -62,7 +62,7 @@ static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr,
char drc_name[MAX_DRC_NAME_LEN];
char *end;
- if (nbytes > MAX_DRC_NAME_LEN)
+ if (nbytes >= MAX_DRC_NAME_LEN)
return 0;
memcpy(drc_name, buf, nbytes);
@@ -83,7 +83,7 @@ static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr,
char drc_name[MAX_DRC_NAME_LEN];
char *end;
- if (nbytes > MAX_DRC_NAME_LEN)
+ if (nbytes >= MAX_DRC_NAME_LEN)
return 0;
memcpy(drc_name, buf, nbytes);
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index b1409441c1cd..a32ae82e5922 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -159,7 +159,7 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
- slot = kcalloc(1, sizeof(*slot), GFP_KERNEL);
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
if (!slot)
return -ENOMEM;
bss_hotplug_slot->private = slot;
@@ -491,7 +491,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
if (sn_pci_slot_valid(pci_bus, device) != 1)
continue;
- bss_hotplug_slot = kcalloc(1, sizeof(*bss_hotplug_slot),
+ bss_hotplug_slot = kzalloc(sizeof(*bss_hotplug_slot),
GFP_KERNEL);
if (!bss_hotplug_slot) {
rc = -ENOMEM;
@@ -499,7 +499,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
}
bss_hotplug_slot->info =
- kcalloc(1, sizeof(struct hotplug_slot_info),
+ kzalloc(sizeof(struct hotplug_slot_info),
GFP_KERNEL);
if (!bss_hotplug_slot->info) {
rc = -ENOMEM;
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 56a3b397efee..2898830c496f 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -360,7 +360,7 @@ pci_create_resource_files(struct pci_dev *pdev)
continue;
/* allocate attribute structure, piggyback attribute name */
- res_attr = kcalloc(1, sizeof(*res_attr) + 10, GFP_ATOMIC);
+ res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
if (res_attr) {
char *res_attr_name = (char *)(res_attr + 1);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 26a55d08b506..c77d5b1bbff6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -165,7 +165,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
if (l == 0xffffffff)
l = 0;
if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
- sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
+ sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
if (!sz)
continue;
res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
@@ -215,7 +215,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
if (l == 0xffffffff)
l = 0;
if (sz && sz != 0xffffffff) {
- sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
+ sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
if (sz) {
res->flags = (l & IORESOURCE_ROM_ENABLE) |
IORESOURCE_MEM | IORESOURCE_PREFETCH |
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 91ea8e4777f3..dbb3eb0e330b 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -437,7 +437,7 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
if (cdev->dev.driver_data) {
gdev = (struct ccwgroup_device *)cdev->dev.driver_data;
if (get_device(&gdev->dev)) {
- if (klist_node_attached(&gdev->dev.knode_bus))
+ if (device_is_registered(&gdev->dev))
return gdev;
put_device(&gdev->dev);
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index c47c8052b486..f1fb67fe22a8 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -987,7 +987,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
/* remove this interface if it has been registered */
interface = dev->actconfig->interface[i];
- if (!klist_node_attached(&interface->dev.knode_bus))
+ if (!device_is_registered(&interface->dev))
continue;
dev_dbg (&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 087af73a59dd..7d131509e419 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -303,7 +303,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
/* if interface was already added, bind now; else let
* the future device_add() bind it, bypassing probe()
*/
- if (klist_node_attached(&dev->knode_bus))
+ if (device_is_registered(dev))
device_bind_driver(dev);
return 0;
@@ -336,8 +336,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
if (iface->condition != USB_INTERFACE_BOUND)
return;
- /* release only after device_add() */
- if (klist_node_attached(&dev->knode_bus)) {
+ /* don't release if the interface hasn't been added yet */
+ if (device_is_registered(dev)) {
iface->condition = USB_INTERFACE_UNBINDING;
device_release_driver(dev);
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1507738337c4..73f8c9404156 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev)
}
static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
@@ -2602,7 +2602,7 @@ static int __exit pxa2xx_udc_remove(struct device *_dev)
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index d0bc396a85d5..a58f3e6e71f1 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -69,11 +69,11 @@ struct pxa2xx_ep {
* UDDR = UDC Endpoint Data Register (the fifo)
* DRCM = DMA Request Channel Map
*/
- volatile u32 *reg_udccs;
- volatile u32 *reg_ubcr;
- volatile u32 *reg_uddr;
+ volatile unsigned long *reg_udccs;
+ volatile unsigned long *reg_ubcr;
+ volatile unsigned long *reg_uddr;
#ifdef USE_DMA
- volatile u32 *reg_drcmr;
+ volatile unsigned long *reg_drcmr;
#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
#else
#define drcmr(n)
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d2a1fd40dfcb..d42a15d10a46 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -782,6 +782,9 @@ retry:
/* usb 1.1 says max 90% of a frame is available for periodic transfers.
* this driver doesn't promise that much since it's got to handle an
* IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE: the periodic schedule is a sparse tree, with the load for
+ * each branch minimized. see fig 3.5 in the OHCI spec for example.
*/
#define MAX_PERIODIC_LOAD 500 /* out of 1000 usec */
@@ -843,6 +846,7 @@ static int sl811h_urb_enqueue(
if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
|| !HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
+ kfree(ep);
goto fail;
}
@@ -911,8 +915,16 @@ static int sl811h_urb_enqueue(
case PIPE_ISOCHRONOUS:
case PIPE_INTERRUPT:
urb->interval = ep->period;
- if (ep->branch < PERIODIC_SIZE)
+ if (ep->branch < PERIODIC_SIZE) {
+ /* NOTE: the phase is correct here, but the value
+ * needs offsetting by the transfer queue depth.
+ * All current drivers ignore start_frame, so this
+ * is unlikely to ever matter...
+ */
+ urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+ + ep->branch;
break;
+ }
retval = balance(sl811, ep->period, ep->load);
if (retval < 0)
@@ -1122,7 +1134,7 @@ sl811h_hub_descriptor (
desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
/* two bitmaps: ports removable, and legacy PortPwrCtrlMask */
- desc->bitmap[0] = 1 << 1;
+ desc->bitmap[0] = 0 << 1;
desc->bitmap[1] = ~0;
}
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 7484d34780fc..6a4ffe6c3977 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -648,6 +648,13 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
}
/*
+ * If the packet is unreasonably long, quietly drop it rather than
+ * kernel panicing by calling skb_put.
+ */
+ if (pkt_len > PEGASUS_MTU)
+ goto goon;
+
+ /*
* at this point we are sure pegasus->rx_skb != NULL
* so we go ahead and pass up the packet.
*/
@@ -886,15 +893,17 @@ static inline void get_interrupt_interval(pegasus_t * pegasus)
__u8 data[2];
read_eprom_word(pegasus, 4, (__u16 *) data);
- if (data[1] < 0x80) {
- if (netif_msg_timer(pegasus))
- dev_info(&pegasus->intf->dev,
- "intr interval changed from %ums to %ums\n",
- data[1], 0x80);
- data[1] = 0x80;
-#ifdef PEGASUS_WRITE_EEPROM
- write_eprom_word(pegasus, 4, *(__u16 *) data);
+ if (pegasus->usb->speed != USB_SPEED_HIGH) {
+ if (data[1] < 0x80) {
+ if (netif_msg_timer(pegasus))
+ dev_info(&pegasus->intf->dev, "intr interval "
+ "changed from %ums to %ums\n",
+ data[1], 0x80);
+ data[1] = 0x80;
+#ifdef PEGASUS_WRITE_EEPROM
+ write_eprom_word(pegasus, 4, *(__u16 *) data);
#endif
+ }
}
pegasus->intr_interval = data[1];
}
@@ -904,8 +913,9 @@ static void set_carrier(struct net_device *net)
pegasus_t *pegasus = netdev_priv(net);
u16 tmp;
- if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+ if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
return;
+
if (tmp & BMSR_LSTATUS)
netif_carrier_on(net);
else
@@ -1355,6 +1365,7 @@ static void pegasus_disconnect(struct usb_interface *intf)
cancel_delayed_work(&pegasus->carrier_check);
unregister_netdev(pegasus->net);
usb_put_dev(interface_to_usbdev(intf));
+ unlink_all_urbs(pegasus);
free_all_urbs(pegasus);
free_skb_pool(pegasus);
if (pegasus->rx_skb)
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index a4ce0008d69b..926d4c2c1600 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -16,7 +16,8 @@
#include "usb-serial.h"
static struct usb_device_id id_table [] = {
- { USB_DEVICE(0xf3d, 0x0112) },
+ { USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
+ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4e434cb10bb1..5a8631c8a4a7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1846,10 +1846,12 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
} else {
/* set the baudrate determined before */
if (change_speed(port)) {
- err("%s urb failed to set baurdrate", __FUNCTION__);
+ err("%s urb failed to set baudrate", __FUNCTION__);
+ }
+ /* Ensure RTS and DTR are raised when baudrate changed from 0 */
+ if ((old_termios->c_cflag & CBAUD) == B0) {
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
- /* Ensure RTS and DTR are raised */
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/* Set flow control */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 92d0f925d053..4989e5740d18 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -25,6 +25,9 @@
2005-06-20 v0.4.1 add missing braces :-/
killed end-of-line whitespace
2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2
+ 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard
+ 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes
+ wants to send >2000 bytes.
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
@@ -71,15 +74,21 @@ static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
+#define HUAWEI_VENDOR_ID 0x12D1
+#define AUDIOVOX_VENDOR_ID 0x0F3D
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
+#define HUAWEI_PRODUCT_E600 0x1001
+#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ } /* Terminating entry */
};
@@ -132,7 +141,7 @@ static int debug;
#define N_IN_URB 4
#define N_OUT_URB 1
-#define IN_BUFLEN 1024
+#define IN_BUFLEN 4096
#define OUT_BUFLEN 128
struct option_port_private {
diff --git a/include/linux/device.h b/include/linux/device.h
index 06e5d42f2c7b..95d607a48f06 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -317,6 +317,11 @@ dev_set_drvdata (struct device *dev, void *data)
dev->driver_data = data;
}
+static inline int device_is_registered(struct device *dev)
+{
+ return klist_node_attached(&dev->knode_bus);
+}
+
/*
* High level routines for use by the bus drivers
*/