summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/myri10ge/myri10ge.c121
1 files changed, 68 insertions, 53 deletions
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 3245357a06f2..f53b0dad65ab 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -714,14 +714,78 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
mgp->dev->name);
}
-static int myri10ge_reset(struct myri10ge_priv *mgp)
+static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
{
struct myri10ge_cmd cmd;
int status;
- size_t bytes;
u32 len;
struct page *dmatest_page;
dma_addr_t dmatest_bus;
+ char *test = " ";
+
+ dmatest_page = alloc_page(GFP_KERNEL);
+ if (!dmatest_page)
+ return -ENOMEM;
+ dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ /* Run a small DMA test.
+ * The magic multipliers to the length tell the firmware
+ * to do DMA read, write, or read+write tests. The
+ * results are returned in cmd.data0. The upper 16
+ * bits or the return is the number of transfers completed.
+ * The lower 16 bits is the time in 0.5us ticks that the
+ * transfers took to complete.
+ */
+
+ len = mgp->tx.boundary;
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10000;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read";
+ goto abort;
+ }
+ mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x1;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "write";
+ goto abort;
+ }
+ mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10001;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read/write";
+ goto abort;
+ }
+ mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
+ (cmd.data0 & 0xffff);
+
+abort:
+ pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+ put_page(dmatest_page);
+
+ if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
+ dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
+ test, status);
+
+ return status;
+}
+
+static int myri10ge_reset(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+ size_t bytes;
/* try to send a reset command to the card to see if it
* is alive */
@@ -731,11 +795,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
dev_err(&mgp->pdev->dev, "failed reset\n");
return -ENXIO;
}
- dmatest_page = alloc_page(GFP_KERNEL);
- if (!dmatest_page)
- return -ENOMEM;
- dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
- DMA_BIDIRECTIONAL);
+
+ (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
/* Now exchange information about interrupts */
@@ -763,52 +824,6 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
- /* Run a small DMA test.
- * The magic multipliers to the length tell the firmware
- * to do DMA read, write, or read+write tests. The
- * results are returned in cmd.data0. The upper 16
- * bits or the return is the number of transfers completed.
- * The lower 16 bits is the time in 0.5us ticks that the
- * transfers took to complete.
- */
-
- len = mgp->tx.boundary;
-
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x10000;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->read_dma = ((cmd.data0 >> 16) * len * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n",
- status);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x1;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->write_dma = ((cmd.data0 >> 16) * len * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n",
- status);
-
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x10001;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev,
- "DMA read/write benchmark failed: %d\n", status);
-
- pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
- put_page(dmatest_page);
-
memset(mgp->rx_done.entry, 0, bytes);
/* reset mcp/driver shared state back to 0 */