diff options
| -rw-r--r-- | arch/mips/au1000/pb1200/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/au1000/pb1200/board_setup.c | 139 | ||||
| -rw-r--r-- | arch/mips/au1000/pb1200/init.c | 18 | ||||
| -rw-r--r-- | arch/mips/au1000/pb1200/irqmap.c | 66 | ||||
| -rw-r--r-- | include/asm-mips/mach-db1x00/db1200.h | 73 | ||||
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1200.h | 93 |
6 files changed, 186 insertions, 205 deletions
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile index 4fe02ea65a60..d678adf7ce85 100644 --- a/arch/mips/au1000/pb1200/Makefile +++ b/arch/mips/au1000/pb1200/Makefile @@ -1,5 +1,5 @@ # -# Makefile for the Alchemy Semiconductor PB1200 board. +# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. # lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 4493a792cc4c..6cb2115059ad 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -27,16 +27,8 @@ #include <linux/init.h> #include <linux/sched.h> -#include <au1000.h> #include <prom.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#endif +#include <au1xxx.h> extern void _board_init_irq(void); extern void (*board_init_irq)(void); @@ -53,56 +45,57 @@ void __init board_setup(void) #if 0 { - u32 pin_func; - - /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ - au_sync(); + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); } #endif #if defined(CONFIG_I2C_AU1550) { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBUS in CPLD */ - bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(3<<17 | 1<<4); - /* Set GPIOs correctly */ - pin_func |= 2<<17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The i2c driver depends on 50Mhz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= (3<<SYS_FC_FRDIV1_BIT); - /* 396Mhz / (3+1)*2 == 49.5Mhz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~0x01f00000; - /* bit 22 is EXTCLK0 for PSC0 */ - clksrc |= (0x3 << 22); - au_writel(clksrc, SYS_CLKSRC); - au_sync(); + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); } #endif @@ -116,27 +109,27 @@ void __init board_setup(void) #endif #endif - /* The Pb1200 development board uses external MUX for PSC0 to - support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI - */ + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ #ifdef CONFIG_I2C_AU1550 - bcsr->resets &= (~BCSR_RESETS_PCS0MUX); + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; #endif au_sync(); #ifdef CONFIG_MIPS_PB1200 - printk("AMD Alchemy Pb1200 Board\n"); + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); #endif #ifdef CONFIG_MIPS_DB1200 - printk("AMD Alchemy Db1200 Board\n"); + printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); #endif /* Setup Pb1200 External Interrupt Controller */ board_init_irq = _board_init_irq; } -int -board_au1200fb_panel(void) +int board_au1200fb_panel(void) { BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; int p; @@ -147,23 +140,23 @@ board_au1200fb_panel(void) return p; } -int -board_au1200fb_panel_init(void) +int board_au1200fb_panel_init(void) { /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); - /*printk("board_au1200fb_panel_init()\n"); */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ return 0; } -int -board_au1200fb_panel_shutdown(void) +int board_au1200fb_panel_shutdown(void) { /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); - /*printk("board_au1200fb_panel_shutdown()\n"); */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ return 0; } - diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index 72af5500660b..09fd63b86062 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * PB1200 board setup * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -45,16 +44,15 @@ void __init prom_init(void) unsigned char *memsize_str; unsigned long memsize; - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) { + if (!memsize_str) memsize = 0x08000000; - } else { - memsize = simple_strtol(memsize_str, NULL, 0); - } + else + memsize = strict_strtol(memsize_str, 0, NULL); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index e61eb8e0b76b..2a505ad8715b 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -39,25 +39,25 @@ #endif struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade + /* This is external interrupt cascade */ + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, }; int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); /* - * Support for External interrupts on the PbAu1200 Development platform. + * Support for External interrupts on the Pb1200 Development platform. */ -static volatile int pb1200_cascade_en=0; +static volatile int pb1200_cascade_en; -irqreturn_t pb1200_cascade_handler( int irq, void *dev_id) +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) { unsigned short bisr = bcsr->int_status; int extirq_nr = 0; - /* Clear all the edge interrupts. This has no effect on level */ + /* Clear all the edge interrupts. This has no effect on level. */ bcsr->int_status = bisr; - for( ; bisr; bisr &= (bisr-1) ) - { + for ( ; bisr; bisr &= bisr - 1) { extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); /* Ack and dispatch IRQ */ do_IRQ(extirq_nr); @@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int irq, void *dev_id) inline void pb1200_enable_irq(unsigned int irq_nr) { - bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN); - bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); } inline void pb1200_disable_irq(unsigned int irq_nr) { - bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); } static unsigned int pb1200_setup_cascade(void) { - int err; - - err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, - 0, "Pb1200 Cascade", &pb1200_cascade_handler); - if (err) - return err; - - return 0; + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); } static unsigned int pb1200_startup_irq(unsigned int irq) @@ -132,23 +126,23 @@ void _board_init_irq(void) unsigned int irq; #ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev3. Enable a workaround */ + /* We have a problem with CPLD rev 3. */ if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); - printk("updated to latest revision. This software will not\n"); - printk("work on anything less than CPLD rev4\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); - printk("\nWARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); panic("Game over. Your score is 0."); } #endif @@ -161,6 +155,6 @@ void _board_init_irq(void) /* * GPIO_7 can not be hooked here, so it is hooked upon first - * request of any source attached to the cascade + * request of any source attached to the cascade. */ } diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index eedd048a7261..27f26102b1bb 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -1,6 +1,6 @@ /* - * AMD Alchemy DB1200 Referrence Board - * Board Registers defines. + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. * * ######################################################################## * @@ -27,26 +27,25 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define AC97_PSC_BASE PSC1_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xB9800000 +#define BCSR_KSEG1_ADDR 0xB9800000 typedef volatile struct { @@ -102,9 +101,9 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -122,8 +121,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 #define BCSR_RESETS_TV 0x0010 -/* not resets but in the same register */ -#define BCSR_RESETS_PWMR1mUX 0x0800 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 @@ -160,7 +159,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -179,10 +178,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define NAND_PHYS_ADDR 0x20000000 /* - * External Interrupts for Pb1200 as of 8/6/2004. + * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking * the interrupt define and subtracting the DB1200_INT_BEGIN value. * @@ -211,23 +210,21 @@ enum external_pb1200_ints { }; -/* For drivers/pcmcia/au1000_db1x00.c */ - -/* PCMCIA Db1x00 specific defines */ - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) -/* Nand chip select */ +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_DB1200_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index e2c6bcac3b42..c8618df88cb5 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy PB1200 Referrence Board + * AMD Alchemy Pb1200 Referrence Board * Board Registers defines. * * ######################################################################## @@ -27,21 +27,20 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. */ #define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR @@ -102,10 +101,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -123,11 +122,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 /* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_WSCFSM 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 +#define BCSR_RESETS_SD1MUX 0x8000 #define BCSR_PCMCIA_PC0VPP 0x0003 #define BCSR_PCMCIA_PC0VCC 0x000C @@ -163,7 +162,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -174,14 +173,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD1INSERT 0x4000 #define BCSR_INT_SD1EJECT 0x8000 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - #define SMC91C111_PHYS_ADDR 0x0D000300 #define SMC91C111_INT PB1200_ETH_INT @@ -192,18 +183,19 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x1C000000 +#define NAND_PHYS_ADDR 0x1C000000 -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. - * These defines are here rather than an SOC1200 generic file because + * These defines are here rather than an Au1200 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -211,11 +203,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) - +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) /* * External Interrupts for Pb1200 as of 8/6/2004. @@ -248,13 +239,21 @@ enum external_pb1200_ints { PB1200_INT_END = PB1200_INT_BEGIN + 15 }; -/* For drivers/pcmcia/au1000_db1x00.c */ -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -/* Nand chip select */ +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_PB1200_H */ - |