diff options
| -rw-r--r-- | drivers/bluetooth/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/ath3k.c | 187 |
3 files changed, 200 insertions, 1 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 652367aa6546..058fbccf2f52 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -195,5 +195,16 @@ config BT_MRVL_SDIO Say Y here to compile support for Marvell BT-over-SDIO driver into the kernel or say M to compile it as module. -endmenu +config BT_ATH3K + tristate "Atheros firmware download driver" + depends on BT_HCIBTUSB + select FW_LOADER + help + Bluetooth firmware download driver. + This driver loads the firmware into the Atheros Bluetooth + chipset. + Say Y here to compile support for "Atheros firmware download driver" + into the kernel or say M to compile it as module (ath3k). + +endmenu diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index b3f57d2d4eb0..7e5aed598121 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o +obj-$(CONFIG_BT_ATH3K) += ath3k.o obj-$(CONFIG_BT_MRVL) += btmrvl.o obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c new file mode 100644 index 000000000000..add9485ca5b6 --- /dev/null +++ b/drivers/bluetooth/ath3k.c @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/usb.h> +#include <net/bluetooth/bluetooth.h> + +#define VERSION "1.0" + + +static struct usb_device_id ath3k_table[] = { + /* Atheros AR3011 */ + { USB_DEVICE(0x0CF3, 0x3000) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ath3k_table); + +#define USB_REQ_DFU_DNLOAD 1 +#define BULK_SIZE 4096 + +struct ath3k_data { + struct usb_device *udev; + u8 *fw_data; + u32 fw_size; + u32 fw_sent; +}; + +static int ath3k_load_firmware(struct ath3k_data *data, + unsigned char *firmware, + int count) +{ + u8 *send_buf; + int err, pipe, len, size, sent = 0; + + BT_DBG("ath3k %p udev %p", data, data->udev); + + pipe = usb_sndctrlpipe(data->udev, 0); + + if ((usb_control_msg(data->udev, pipe, + USB_REQ_DFU_DNLOAD, + USB_TYPE_VENDOR, 0, 0, + firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + BT_ERR("Can't change to loading configuration err"); + return -EBUSY; + } + sent += 20; + count -= 20; + + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + while (count) { + size = min_t(uint, count, BULK_SIZE); + pipe = usb_sndbulkpipe(data->udev, 0x02); + memcpy(send_buf, firmware + sent, size); + + err = usb_bulk_msg(data->udev, pipe, send_buf, size, + &len, 3000); + + if (err || (len != size)) { + BT_ERR("Error in firmware loading err = %d," + "len = %d, size = %d", err, len, size); + goto error; + } + + sent += size; + count -= size; + } + + kfree(send_buf); + return 0; + +error: + kfree(send_buf); + return err; +} + +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + const struct firmware *firmware; + struct usb_device *udev = interface_to_usbdev(intf); + struct ath3k_data *data; + int size; + + BT_DBG("intf %p id %p", intf, id); + + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->udev = udev; + + if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { + kfree(data); + return -EIO; + } + + size = max_t(uint, firmware->size, 4096); + data->fw_data = kmalloc(size, GFP_KERNEL); + if (!data->fw_data) { + release_firmware(firmware); + kfree(data); + return -ENOMEM; + } + + memcpy(data->fw_data, firmware->data, firmware->size); + data->fw_size = firmware->size; + data->fw_sent = 0; + release_firmware(firmware); + + usb_set_intfdata(intf, data); + if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { + usb_set_intfdata(intf, NULL); + return -EIO; + } + + return 0; +} + +static void ath3k_disconnect(struct usb_interface *intf) +{ + struct ath3k_data *data = usb_get_intfdata(intf); + + BT_DBG("ath3k_disconnect intf %p", intf); + + kfree(data->fw_data); + kfree(data); +} + +static struct usb_driver ath3k_driver = { + .name = "ath3k", + .probe = ath3k_probe, + .disconnect = ath3k_disconnect, + .id_table = ath3k_table, +}; + +static int __init ath3k_init(void) +{ + BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION); + return usb_register(&ath3k_driver); +} + +static void __exit ath3k_exit(void) +{ + usb_deregister(&ath3k_driver); +} + +module_init(ath3k_init); +module_exit(ath3k_exit); + +MODULE_AUTHOR("Atheros Communications"); +MODULE_DESCRIPTION("Atheros AR30xx firmware driver"); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("ath3k-1.fw"); |