diff options
| -rw-r--r-- | drivers/net/sfc/ethtool.c | 57 | ||||
| -rw-r--r-- | drivers/net/sfc/falcon.c | 6 | ||||
| -rw-r--r-- | drivers/net/sfc/falcon_gmac.c | 4 | ||||
| -rw-r--r-- | drivers/net/sfc/falcon_xmac.c | 2 | ||||
| -rw-r--r-- | drivers/net/sfc/mdio_10g.c | 348 | ||||
| -rw-r--r-- | drivers/net/sfc/mdio_10g.h | 32 | ||||
| -rw-r--r-- | drivers/net/sfc/net_driver.h | 38 | ||||
| -rw-r--r-- | drivers/net/sfc/tenxpress.c | 138 | ||||
| -rw-r--r-- | drivers/net/sfc/xfp_phy.c | 1 |
9 files changed, 472 insertions, 154 deletions
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 1b33f89df4d5..0e81af6d8348 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -12,11 +12,13 @@ #include <linux/ethtool.h> #include <linux/rtnetlink.h> #include "net_driver.h" +#include "workarounds.h" #include "selftest.h" #include "efx.h" #include "ethtool.h" #include "falcon.h" #include "spi.h" +#include "mdio_10g.h" const char *efx_loopback_mode_names[] = { [LOOPBACK_NONE] = "NONE", @@ -674,14 +676,51 @@ static int efx_ethtool_set_pauseparam(struct net_device *net_dev, struct ethtool_pauseparam *pause) { struct efx_nic *efx = netdev_priv(net_dev); - enum efx_fc_type flow_control = efx->flow_control; + enum efx_fc_type wanted_fc; + bool reset; - flow_control &= ~(EFX_FC_RX | EFX_FC_TX | EFX_FC_AUTO); - flow_control |= pause->rx_pause ? EFX_FC_RX : 0; - flow_control |= pause->tx_pause ? EFX_FC_TX : 0; - flow_control |= pause->autoneg ? EFX_FC_AUTO : 0; + wanted_fc = ((pause->rx_pause ? EFX_FC_RX : 0) | + (pause->tx_pause ? EFX_FC_TX : 0) | + (pause->autoneg ? EFX_FC_AUTO : 0)); + + if ((wanted_fc & EFX_FC_TX) && !(wanted_fc & EFX_FC_RX)) { + EFX_LOG(efx, "Flow control unsupported: tx ON rx OFF\n"); + return -EINVAL; + } + + if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) && + (wanted_fc & EFX_FC_AUTO)) { + EFX_LOG(efx, "PHY does not support flow control " + "autonegotiation\n"); + return -EINVAL; + } + + /* TX flow control may automatically turn itself off if the + * link partner (intermittently) stops responding to pause + * frames. There isn't any indication that this has happened, + * so the best we do is leave it up to the user to spot this + * and fix it be cycling transmit flow control on this end. */ + reset = (wanted_fc & EFX_FC_TX) && !(efx->wanted_fc & EFX_FC_TX); + if (EFX_WORKAROUND_11482(efx) && reset) { + if (falcon_rev(efx) >= FALCON_REV_B0) { + /* Recover by resetting the EM block */ + if (efx->link_up) + falcon_drain_tx_fifo(efx); + } else { + /* Schedule a reset to recover */ + efx_schedule_reset(efx, RESET_TYPE_INVISIBLE); + } + } + + /* Try to push the pause parameters */ + mutex_lock(&efx->mac_lock); + + efx->wanted_fc = wanted_fc; + mdio_clause45_set_pause(efx); + __efx_reconfigure_port(efx); + + mutex_unlock(&efx->mac_lock); - efx_reconfigure_port(efx); return 0; } @@ -690,9 +729,9 @@ static void efx_ethtool_get_pauseparam(struct net_device *net_dev, { struct efx_nic *efx = netdev_priv(net_dev); - pause->rx_pause = !!(efx->flow_control & EFX_FC_RX); - pause->tx_pause = !!(efx->flow_control & EFX_FC_TX); - pause->autoneg = !!(efx->flow_control & EFX_FC_AUTO); + pause->rx_pause = !!(efx->wanted_fc & EFX_FC_RX); + pause->tx_pause = !!(efx->wanted_fc & EFX_FC_TX); + pause->autoneg = !!(efx->wanted_fc & EFX_FC_AUTO); } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index f09eded40fba..fde4e7912c39 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1998,7 +1998,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) /* Transmission of pause frames when RX crosses the threshold is * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL. * Action on receipt of pause frames is controller by XM_DIS_FCNTL */ - tx_fc = !!(efx->flow_control & EFX_FC_TX); + tx_fc = !!(efx->link_fc & EFX_FC_TX); falcon_read(efx, ®, RX_CFG_REG_KER); EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); @@ -2328,9 +2328,9 @@ int falcon_probe_port(struct efx_nic *efx) /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ if (falcon_rev(efx) >= FALCON_REV_B0) - efx->flow_control = EFX_FC_RX | EFX_FC_TX; + efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; else - efx->flow_control = EFX_FC_RX; + efx->wanted_fc = EFX_FC_RX; /* Allocate buffer for stats */ rc = falcon_alloc_buffer(efx, &efx->stats_buffer, diff --git a/drivers/net/sfc/falcon_gmac.c b/drivers/net/sfc/falcon_gmac.c index 247f8025ef00..b6e6eb963905 100644 --- a/drivers/net/sfc/falcon_gmac.c +++ b/drivers/net/sfc/falcon_gmac.c @@ -31,8 +31,8 @@ static void falcon_reconfigure_gmac(struct efx_nic *efx) efx_oword_t reg; /* Configuration register 1 */ - tx_fc = (efx->flow_control & EFX_FC_TX) || !efx->link_fd; - rx_fc = !!(efx->flow_control & EFX_FC_RX); + tx_fc = (efx->link_fc & EFX_FC_TX) || !efx->link_fd; + rx_fc = !!(efx->link_fc & EFX_FC_RX); loopback = (efx->loopback_mode == LOOPBACK_GMAC); bytemode = (efx->link_speed == 1000); diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index 2206eada3463..0ce8f015386c 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -142,7 +142,7 @@ static void falcon_reconfigure_xmac_core(struct efx_nic *efx) { unsigned int max_frame_len; efx_oword_t reg; - bool rx_fc = !!(efx->flow_control & EFX_FC_RX); + bool rx_fc = !!(efx->link_fc & EFX_FC_RX); /* Configure MAC - cut-thru mode is hard wired on */ EFX_POPULATE_DWORD_3(reg, diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 8d91131aa5ab..037601e0b9d7 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -47,13 +47,16 @@ static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd, if (LOOPBACK_INTERNAL(efx)) return 0; - /* Read MMD STATUS2 to check it is responding. */ - status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT2); - if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) & - ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) != - MDIO_MMDREG_STAT2_PRESENT_VAL) { - EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd); - return -EIO; + if (mmd != MDIO_MMD_AN) { + /* Read MMD STATUS2 to check it is responding. */ + status = mdio_clause45_read(efx, phy_id, mmd, + MDIO_MMDREG_STAT2); + if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) & + ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) != + MDIO_MMDREG_STAT2_PRESENT_VAL) { + EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd); + return -EIO; + } } /* Read MMD STATUS 1 to check for fault. */ @@ -179,12 +182,15 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | MDIO_MMDREG_DEVS_PCS | - MDIO_MMDREG_DEVS_PMAPMD); + MDIO_MMDREG_DEVS_PMAPMD | + MDIO_MMDREG_DEVS_AN); else if (efx->loopback_mode == LOOPBACK_PCS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | - MDIO_MMDREG_DEVS_PMAPMD); + MDIO_MMDREG_DEVS_PMAPMD | + MDIO_MMDREG_DEVS_AN); else if (efx->loopback_mode == LOOPBACK_PMAPMD) - mmd_mask &= ~MDIO_MMDREG_DEVS_PMAPMD; + mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | + MDIO_MMDREG_DEVS_AN); while (mmd_mask) { if (mmd_mask & 1) { @@ -244,6 +250,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, int low_power, unsigned int mmd_mask) { int mmd = 0; + mmd_mask &= ~MDIO_MMDREG_DEVS_AN; while (mmd_mask) { if (mmd_mask & 1) mdio_clause45_set_mmd_lpower(efx, low_power, mmd); @@ -252,103 +259,302 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +{ + int phy_id = efx->mii.phy_id; + u32 result = 0; + int reg; + + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr); + if (reg & ADVERTISE_10HALF) + result |= ADVERTISED_10baseT_Half; + if (reg & ADVERTISE_10FULL) + result |= ADVERTISED_10baseT_Full; + if (reg & ADVERTISE_100HALF) + result |= ADVERTISED_100baseT_Half; + if (reg & ADVERTISE_100FULL) + result |= ADVERTISED_100baseT_Full; + if (reg & LPA_RESV) + result |= xnp; + + return result; +} + /** * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO. * @efx: Efx NIC * @ecmd: Buffer for settings * * On return the 'port', 'speed', 'supported' and 'advertising' fields of - * ecmd have been filled out based on the PMA type. + * ecmd have been filled out. */ void mdio_clause45_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int pma_type; + mdio_clause45_get_settings_ext(efx, ecmd, 0, 0); +} - /* If no PMA is present we are presumably talking something XAUI-ish - * like CX4. Which we report as FIBRE (see below) */ - if ((efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)) == 0) { - ecmd->speed = SPEED_10000; - ecmd->port = PORT_FIBRE; - ecmd->supported = SUPPORTED_FIBRE; - ecmd->advertising = ADVERTISED_FIBRE; - return; - } +/** + * mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO. + * @efx: Efx NIC + * @ecmd: Buffer for settings + * @xnp: Advertised Extended Next Page state + * @xnp_lpa: Link Partner's advertised XNP state + * + * On return the 'port', 'speed', 'supported' and 'advertising' fields of + * ecmd have been filled out. + */ +void mdio_clause45_get_settings_ext(struct efx_nic *efx, + struct ethtool_cmd *ecmd, + u32 xnp, u32 xnp_lpa) +{ + int phy_id = efx->mii.phy_id; + int reg; - pma_type = mdio_clause45_read(efx, efx->mii.phy_id, - MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL2); - pma_type &= MDIO_PMAPMD_CTRL2_TYPE_MASK; + ecmd->transceiver = XCVR_INTERNAL; + ecmd->phy_address = phy_id; - switch (pma_type) { - /* We represent CX4 as fibre in the absence of anything - better. */ - case MDIO_PMAPMD_CTRL2_10G_CX4: - ecmd->speed = SPEED_10000; - ecmd->port = PORT_FIBRE; - ecmd->supported = SUPPORTED_FIBRE; - ecmd->advertising = ADVERTISED_FIBRE; - break; - /* 10G Base-T */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL2); + switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) { case MDIO_PMAPMD_CTRL2_10G_BT: - ecmd->speed = SPEED_10000; - ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP | SUPPORTED_10000baseT_Full; - ecmd->advertising = (ADVERTISED_FIBRE - | ADVERTISED_10000baseT_Full); - break; case MDIO_PMAPMD_CTRL2_1G_BT: - ecmd->speed = SPEED_1000; - ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP | SUPPORTED_1000baseT_Full; - ecmd->advertising = (ADVERTISED_FIBRE - | ADVERTISED_1000baseT_Full); - break; case MDIO_PMAPMD_CTRL2_100_BT: - ecmd->speed = SPEED_100; - ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP | SUPPORTED_100baseT_Full; - ecmd->advertising = (ADVERTISED_FIBRE - | ADVERTISED_100baseT_Full); - break; case MDIO_PMAPMD_CTRL2_10_BT: - ecmd->speed = SPEED_10; ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP | SUPPORTED_10baseT_Full; - ecmd->advertising = ADVERTISED_FIBRE | ADVERTISED_10baseT_Full; + ecmd->supported = SUPPORTED_TP; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_SPEED); + if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN)) + ecmd->supported |= SUPPORTED_10000baseT_Full; + if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN)) + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN)) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_100baseT_Half); + if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN)) + ecmd->supported |= (SUPPORTED_10baseT_Full | + SUPPORTED_10baseT_Half); + ecmd->advertising = ADVERTISED_TP; break; - /* All the other defined modes are flavours of - * 10G optical */ + + /* We represent CX4 as fibre in the absence of anything better */ + case MDIO_PMAPMD_CTRL2_10G_CX4: + /* All the other defined modes are flavours of optical */ default: - ecmd->speed = SPEED_10000; ecmd->port = PORT_FIBRE; ecmd->supported = SUPPORTED_FIBRE; ecmd->advertising = ADVERTISED_FIBRE; break; } + + if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) { + ecmd->supported |= SUPPORTED_Autoneg; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1); + if (reg & BMCR_ANENABLE) { + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->advertising |= + ADVERTISED_Autoneg | + mdio_clause45_get_an(efx, + MDIO_AN_ADVERTISE, xnp); + } else + ecmd->autoneg = AUTONEG_DISABLE; + } else + ecmd->autoneg = AUTONEG_DISABLE; + + /* If AN is enabled and complete, report best common mode */ + if (ecmd->autoneg && + (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & + (1 << MDIO_AN_STATUS_AN_DONE_LBN))) { + u32 common, lpa; + lpa = mdio_clause45_get_an(efx, MDIO_AN_LPA, xnp_lpa); + common = ecmd->advertising & lpa; + if (common & ADVERTISED_10000baseT_Full) { + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + } else if (common & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { + ecmd->speed = SPEED_1000; + ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); + } else if (common & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { + ecmd->speed = SPEED_100; + ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + } else { + ecmd->speed = SPEED_10; + ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + } + } else { + /* Report forced settings */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) * + ((reg & BMCR_SPEED100) ? 100 : 10)); + ecmd->duplex = (reg & BMCR_FULLDPLX || + ecmd->speed == SPEED_10000); + } } /** * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO. * @efx: Efx NIC * @ecmd: New settings - * - * Currently this just enforces that we are _not_ changing the - * 'port', 'speed', 'supported' or 'advertising' settings as these - * cannot be changed on any currently supported PHY. */ int mdio_clause45_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - struct ethtool_cmd tmpcmd; - mdio_clause45_get_settings(efx, &tmpcmd); - /* None of the current PHYs support more than one mode - * of operation (and only 10GBT ever will), so keep things - * simple for now */ - if ((ecmd->speed == tmpcmd.speed) && (ecmd->port == tmpcmd.port) && - (ecmd->supported == tmpcmd.supported) && - (ecmd->advertising == tmpcmd.advertising)) + int phy_id = efx->mii.phy_id; + struct ethtool_cmd prev; + u32 required; + int ctrl1_bits, reg; + + efx->phy_op->get_settings(efx, &prev); + + if (ecmd->advertising == prev.advertising && + ecmd->speed == prev.speed && + ecmd->duplex == prev.duplex && + ecmd->port == prev.port && + ecmd->autoneg == prev.autoneg) return 0; - return -EOPNOTSUPP; + + /* We can only change these settings for -T PHYs */ + if (prev.port != PORT_TP || ecmd->port != PORT_TP) + return -EINVAL; + + /* Check that PHY supports these settings and work out the + * basic control bits */ + if (ecmd->duplex) { + switch (ecmd->speed) { + case SPEED_10: + ctrl1_bits = BMCR_FULLDPLX; + required = SUPPORTED_10baseT_Full; + break; + case SPEED_100: + ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; + required = SUPPORTED_100baseT_Full; + break; + case SPEED_1000: + ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; + required = SUPPORTED_1000baseT_Full; + break; + case SPEED_10000: + ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | + BMCR_FULLDPLX); + required = SUPPORTED_10000baseT_Full; + break; + default: + return -EINVAL; + } + } else { + switch (ecmd->speed) { + case SPEED_10: + ctrl1_bits = 0; + required = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + ctrl1_bits = BMCR_SPEED100; + required = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + ctrl1_bits = BMCR_SPEED1000; + required = SUPPORTED_1000baseT_Half; + break; + default: + return -EINVAL; + } + } + if (ecmd->autoneg) + required |= SUPPORTED_Autoneg; + required |= ecmd->advertising; + if (required & ~prev.supported) + return -EINVAL; + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); + reg |= ctrl1_bits; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, + reg); + + /* Set the AN registers */ + if (ecmd->autoneg != prev.autoneg || + ecmd->advertising != prev.advertising) { + bool xnp = false; + + if (efx->phy_op->set_xnp_advertise) + xnp = efx->phy_op->set_xnp_advertise(efx, + ecmd->advertising); + + if (ecmd->autoneg) { + reg = 0; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + } + + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1); + if (ecmd->autoneg) + reg |= BMCR_ANENABLE | BMCR_ANRESTART; + else + reg &= ~BMCR_ANENABLE; + if (xnp) + reg |= 1 << MDIO_AN_CTRL_XNP_LBN; + else + reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, reg); + } + + return 0; +} + +void mdio_clause45_set_pause(struct efx_nic *efx) +{ + int phy_id = efx->mii.phy_id; + int reg; + + if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) { + /* Set pause capability advertising */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE); + reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Restart auto-negotiation */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1); + if (reg & BMCR_ANENABLE) { + reg |= BMCR_ANRESTART; + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, reg); + } + } +} + +enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx) +{ + int phy_id = efx->mii.phy_id; + int lpa; + + if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN))) + return efx->wanted_fc; + lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA); + return efx_fc_resolve(efx->wanted_fc, lpa); } void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev, diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 4830e0c1da0b..80c63dde8864 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -81,6 +81,17 @@ #define MDIO_MMDREG_DEVS_PHYXS DEV_PRESENT_BIT(MDIO_MMD_PHYXS) #define MDIO_MMDREG_DEVS_PCS DEV_PRESENT_BIT(MDIO_MMD_PCS) #define MDIO_MMDREG_DEVS_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD) +#define MDIO_MMDREG_DEVS_AN DEV_PRESENT_BIT(MDIO_MMD_AN) + +/* Bits in MMDREG_SPEED */ +#define MDIO_MMDREG_SPEED_10G_LBN 0 +#define MDIO_MMDREG_SPEED_10G_WIDTH 1 +#define MDIO_MMDREG_SPEED_1000M_LBN 4 +#define MDIO_MMDREG_SPEED_1000M_WIDTH 1 +#define MDIO_MMDREG_SPEED_100M_LBN 5 +#define MDIO_MMDREG_SPEED_100M_WIDTH 1 +#define MDIO_MMDREG_SPEED_10M_LBN 6 +#define MDIO_MMDREG_SPEED_10M_WIDTH 1 /* Bits in MMDREG_STAT2 */ #define MDIO_MMDREG_STAT2_PRESENT_VAL (2) @@ -119,12 +130,20 @@ #define MDIO_PHYXS_LANE_ALIGNED_LBN (12) /* AN registers */ +#define MDIO_AN_CTRL_XNP_LBN 13 #define MDIO_AN_STATUS (1) #define MDIO_AN_STATUS_XNP_LBN (7) #define MDIO_AN_STATUS_PAGE_LBN (6) #define MDIO_AN_STATUS_AN_DONE_LBN (5) #define MDIO_AN_STATUS_LP_AN_CAP_LBN (0) +#define MDIO_AN_ADVERTISE 16 +#define MDIO_AN_ADVERTISE_XNP_LBN 12 +#define MDIO_AN_LPA 19 +#define MDIO_AN_XNP 22 +#define MDIO_AN_LPA_XNP 25 + +#define MDIO_AN_10GBT_ADVERTISE 32 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ @@ -251,10 +270,23 @@ extern void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, extern void mdio_clause45_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); +/* Read (some of) the PHY settings over MDIO */ +extern void +mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, + u32 xnp, u32 xnp_lpa); + /* Set (some of) the PHY settings over MDIO */ extern int mdio_clause45_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); +/* Set pause parameters to be advertised through AN (if available) */ +extern void mdio_clause45_set_pause(struct efx_nic *efx); + +/* Get pause parameters from AN if available (otherwise return + * requested pause parameters) + */ +enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx); + /* Wait for specified MMDs to exit reset within a timeout */ extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx, unsigned int mmd_mask); diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 883086e39455..fb8d72527a34 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -511,6 +511,35 @@ enum efx_mac_type { EFX_XMAC = 2, }; +static inline unsigned int efx_fc_advertise(enum efx_fc_type wanted_fc) +{ + unsigned int adv = 0; + if (wanted_fc & EFX_FC_RX) + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + if (wanted_fc & EFX_FC_TX) + adv ^= ADVERTISE_PAUSE_ASYM; + return adv; +} + +static inline enum efx_fc_type efx_fc_resolve(enum efx_fc_type wanted_fc, + unsigned int lpa) +{ + unsigned int adv = efx_fc_advertise(wanted_fc); + + if (!(wanted_fc & EFX_FC_AUTO)) + return wanted_fc; + + if (adv & lpa & ADVERTISE_PAUSE_CAP) + return EFX_FC_RX | EFX_FC_TX; + if (adv & lpa & ADVERTISE_PAUSE_ASYM) { + if (adv & ADVERTISE_PAUSE_CAP) + return EFX_FC_RX; + if (lpa & ADVERTISE_PAUSE_CAP) + return EFX_FC_TX; + } + return 0; +} + /** * struct efx_mac_operations - Efx MAC operations table * @reconfigure: Reconfigure MAC. Serialised by the mac_lock @@ -533,6 +562,8 @@ struct efx_mac_operations { * @check_hw: Check hardware * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. + * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * (only needed where AN bit is set in mmds) * @mmds: MMD presence mask * @loopbacks: Supported loopback modes mask */ @@ -548,6 +579,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); + bool (*set_xnp_advertise) (struct efx_nic *efx, u32); int mmds; unsigned loopbacks; }; @@ -724,11 +756,12 @@ union efx_multicast_hash { * @mac_up: MAC link state * @link_up: Link status * @link_fd: Link is full duplex + * @link_fc: Actualy flow control flags * @link_speed: Link speed (Mbps) * @n_link_state_changes: Number of times the link has changed state * @promiscuous: Promiscuous flag. Protected by netif_tx_lock. * @multicast_hash: Multicast hash table - * @flow_control: Flow control flags - separate RX/TX so can't use link_options + * @wanted_fc: Wanted flow control flags * @reconfigure_work: work item for dealing with PHY events * @loopback_mode: Loopback status * @loopback_modes: Supported loopback mode bitmask @@ -805,12 +838,13 @@ struct efx_nic { bool mac_up; bool link_up; bool link_fd; + enum efx_fc_type link_fc; unsigned int link_speed; unsigned int n_link_state_changes; bool promiscuous; union efx_multicast_hash multicast_hash; - enum efx_fc_type flow_control; + enum efx_fc_type wanted_fc; struct work_struct reconfigure_work; atomic_t rx_reset; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index d60353bb40b6..634ff9198823 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -17,10 +17,10 @@ #include "boards.h" /* We expect these MMDs to be in the package */ -/* AN not here as mdio_check_mmds() requires STAT2 support */ #define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS_PMAPMD | \ MDIO_MMDREG_DEVS_PCS | \ - MDIO_MMDREG_DEVS_PHYXS) + MDIO_MMDREG_DEVS_PHYXS | \ + MDIO_MMDREG_DEVS_AN) #define TENXPRESS_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \ (1 << LOOPBACK_PCS) | \ @@ -57,6 +57,7 @@ #define PMA_PMD_LED_ON (1) #define PMA_PMD_LED_OFF (2) #define PMA_PMD_LED_FLASH (3) +#define PMA_PMD_LED_MASK 3 /* All LEDs under hardware control */ #define PMA_PMD_LED_FULL_AUTO (0) /* Green and Amber under hardware control, Red off */ @@ -242,78 +243,60 @@ unlock: return rc; } -static void tenxpress_set_bad_lp(struct efx_nic *efx, bool bad_lp) +static void tenxpress_check_bad_lp(struct efx_nic *efx, bool link_ok) { struct tenxpress_phy_data *pd = efx->phy_data; + int phy_id = efx->mii.phy_id; + bool bad_lp; int reg; + if (link_ok) { + bad_lp = false; + } else { + /* Check that AN has started but not completed. */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_STATUS); + if (!(reg & (1 << MDIO_AN_STATUS_LP_AN_CAP_LBN))) + return; /* LP status is unknown */ + bad_lp = !(reg & (1 << MDIO_AN_STATUS_AN_DONE_LBN)); + if (bad_lp) + pd->bad_lp_tries++; + } + /* Nothing to do if all is well and was previously so. */ - if (!(bad_lp || pd->bad_lp_tries)) + if (!pd->bad_lp_tries) return; - reg = mdio_clause45_read(efx, efx->mii.phy_id, - MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG); - - if (bad_lp) - pd->bad_lp_tries++; - else - pd->bad_lp_tries = 0; - - if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) { - pd->bad_lp_tries = 0; /* Restart count */ - reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN); - reg |= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN); - EFX_ERR(efx, "This NIC appears to be plugged into" - " a port that is not 10GBASE-T capable.\n" - " This PHY is 10GBASE-T ONLY, so no link can" - " be established.\n"); - } else { - reg |= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN); + /* Use the RX (red) LED as an error indicator once we've seen AN + * failure several times in a row, and also log a message. */ + if (!bad_lp || pd->bad_lp_tries == MAX_BAD_LP_TRIES) { + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG); + reg &= ~(PMA_PMD_LED_MASK << PMA_PMD_LED_RX_LBN); + if (!bad_lp) { + reg |= PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN; + } else { + reg |= PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN; + EFX_ERR(efx, "appears to be plugged into a port" + " that is not 10GBASE-T capable. The PHY" + " supports 10GBASE-T ONLY, so no link can" + " be established\n"); + } + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + PMA_PMD_LED_OVERR_REG, reg); + pd->bad_lp_tries = bad_lp; } - mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_LED_OVERR_REG, reg); } -/* Check link status and return a boolean OK value. If the link is NOT - * OK we have a quick rummage round to see if we appear to be plugged - * into a non-10GBT port and if so warn the user that they won't get - * link any time soon as we are 10GBT only, unless caller specified - * not to do this check (it isn't useful in loopback) */ -static bool tenxpress_link_ok(struct efx_nic *efx, bool check_lp) +static bool tenxpress_link_ok(struct efx_nic *efx) { - bool ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS); - - if (ok) { - tenxpress_set_bad_lp(efx, false); - } else if (check_lp) { - /* Are we plugged into the wrong sort of link? */ - bool bad_lp = false; - int phy_id = efx->mii.phy_id; - int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_STATUS); - int xphy_stat = mdio_clause45_read(efx, phy_id, - MDIO_MMD_PMAPMD, - PMA_PMD_XSTATUS_REG); - /* Are we plugged into anything that sends FLPs? If - * not we can't distinguish between not being plugged - * in and being plugged into a non-AN antique. The FLP - * bit has the advantage of not clearing when autoneg - * restarts. */ - if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) { - tenxpress_set_bad_lp(efx, false); - return ok; - } - - /* If it can do 10GBT it must be XNP capable */ - bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN)); - if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) { - bad_lp = !(mdio_clause45_read(efx, phy_id, - MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) & - (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)); - } - tenxpress_set_bad_lp(efx, bad_lp); - } - return ok; + if (efx->loopback_mode == LOOPBACK_NONE) + return mdio_clause45_links_ok(efx, MDIO_MMDREG_DEVS_AN); + else + return mdio_clause45_links_ok(efx, + MDIO_MMDREG_DEVS_PMAPMD | + MDIO_MMDREG_DEVS_PCS | + MDIO_MMDREG_DEVS_PHYXS); } static void tenxpress_phyxs_loopback(struct efx_nic *efx) @@ -359,9 +342,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_data->loopback_mode = efx->loopback_mode; phy_data->phy_mode = efx->phy_mode; - efx->link_up = tenxpress_link_ok(efx, false); + efx->link_up = tenxpress_link_ok(efx); efx->link_speed = 10000; efx->link_fd = true; + efx->link_fc = mdio_clause45_get_pause(efx); } static void tenxpress_phy_clear_interrupt(struct efx_nic *efx) @@ -377,7 +361,8 @@ static int tenxpress_phy_check_hw(struct efx_nic *efx) bool link_ok; int rc = 0; - link_ok = tenxpress_link_ok(efx, true); + link_ok = tenxpress_link_ok(efx); + tenxpress_check_bad_lp(efx, link_ok); if (link_ok != efx->link_up) falcon_sim_phy_event(efx); @@ -451,6 +436,27 @@ static int tenxpress_phy_test(struct efx_nic *efx) return tenxpress_special_reset(efx); } +static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +{ + int phy = efx->mii.phy_id; + u32 lpa = 0; + int reg; + + reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) + lpa |= ADVERTISED_10000baseT_Full; + return lpa; +} + +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +{ + mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, + tenxpress_get_xnp_lpa(efx)); + ecmd->supported |= SUPPORTED_10000baseT_Full; + ecmd->advertising |= ADVERTISED_10000baseT_Full; +} + struct efx_phy_operations falcon_tenxpress_phy_ops = { .macs = EFX_XMAC, .init = tenxpress_phy_init, @@ -459,7 +465,7 @@ struct efx_phy_operations falcon_tenxpress_phy_ops = { .fini = tenxpress_phy_fini, .clear_interrupt = tenxpress_phy_clear_interrupt, .test = tenxpress_phy_test, - .get_settings = mdio_clause45_get_settings, + .get_settings = tenxpress_get_settings, .set_settings = mdio_clause45_set_settings, .mmds = TENXPRESS_REQUIRED_DEVS, .loopbacks = TENXPRESS_LOOPBACKS, diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index d4e203ddcf1c..fbe8e25a1ed5 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -155,6 +155,7 @@ static void xfp_phy_reconfigure(struct efx_nic *efx) efx->link_up = xfp_link_ok(efx); efx->link_speed = 10000; efx->link_fd = true; + efx->link_fc = efx->wanted_fc; } |