diff options
387 files changed, 5559 insertions, 4322 deletions
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 83009fdcbbc8..2e2c2ea90ceb 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -169,3 +169,62 @@ three different ways to find such a match: be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) + +Early Platform Devices and Drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The early platform interfaces provide platform data to platform device +drivers early on during the system boot. The code is built on top of the +early_param() command line parsing and can be executed very early on. + +Example: "earlyprintk" class early serial console in 6 steps + +1. Registering early platform device data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code registers platform device data using the function +early_platform_add_devices(). In the case of early serial console this +should be hardware configuration for the serial port. Devices registered +at this point will later on be matched against early platform drivers. + +2. Parsing kernel command line +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls parse_early_param() to parse the kernel +command line. This will execute all matching early_param() callbacks. +User specified early platform devices will be registered at this point. +For the early serial console case the user can specify port on the +kernel command line as "earlyprintk=serial.0" where "earlyprintk" is +the class string, "serial" is the name of the platfrom driver and +0 is the platform device id. If the id is -1 then the dot and the +id can be omitted. + +3. Installing early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code may optionally force registration of all early +platform drivers belonging to a certain class using the function +early_platform_driver_register_all(). User specified devices from +step 2 have priority over these. This step is omitted by the serial +driver example since the early serial driver code should be disabled +unless the user has specified port on the kernel command line. + +4. Early platform driver registration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Compiled-in platform drivers making use of early_platform_init() are +automatically registered during step 2 or 3. The serial driver example +should use early_platform_init("earlyprintk", &platform_driver). + +5. Probing of early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls early_platform_driver_probe() to match +registered early platform devices associated with a certain class with +registered early platform drivers. Matched devices will get probed(). +This step can be executed at any point during the early boot. As soon +as possible may be good for the serial port case. + +6. Inside the early platform driver probe() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver code needs to take special care during early boot, especially +when it comes to memory allocation and interrupt registration. The code +in the probe() function can use is_early_platform_device() to check if +it is called at early platform device or at the regular platform device +time. The early serial driver performs register_console() at this point. + +For further information, see <linux/platform_device.h>. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index 6d6db60d567d..dcf833587162 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk data transfers. POHMELFS clients operate with a working set of servers and are capable of balancing read-only -operations (like lookups or directory listings) between them. +operations (like lookups or directory listings) between them according to IO priorities. Administrators can add or remove servers from the set at run-time via special commands (described -in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers. +in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected +with write permission turned on. IO priority and permissions can be changed in run-time. POHMELFS is capable of full data channel encryption and/or strong crypto hashing. One can select any kernel supported cipher, encryption mode, hash type and operation mode diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt index 4e3d50157083..db2e41393626 100644 --- a/Documentation/filesystems/pohmelfs/info.txt +++ b/Documentation/filesystems/pohmelfs/info.txt @@ -1,6 +1,8 @@ POHMELFS usage information. -Mount options: +Mount options. +All but index, number of crypto threads and maximum IO size can changed via remount. + idx=%u Each mountpoint is associated with a special index via this option. Administrator can add or remove servers from the given index, so all mounts, @@ -52,16 +54,27 @@ mcache_timeout=%u Usage examples. -Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx +Add server server1.net:1025 into the working set with index $idx with appropriate hash algorithm and key file and cipher algorithm, mode and key file: -$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key +$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key Mount filesystem with given index $idx to /mnt mountpoint. Client will connect to all servers specified in the working set via previous command: mount -t pohmel -o idx=$idx q /mnt -One can add or remove servers from working set after mounting too. +Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw): +$cfg A modify -a server1.net -p 1025 -i $idx -I 1 + +Change IO priority to 123 (node with the highest priority gets read requests). +$cfg A modify -a server1.net -p 1025 -i $idx -P 123 +One can check currect status of all connections in the mountstats file: +# cat /proc/$PID/mountstats +... +device none mounted on /mnt with fstype pohmel +idx addr(:port) socket_type protocol active priority permissions +0 server1.net:1026 1 6 1 250 1 +0 server2.net:1025 1 6 1 123 3 Server installation. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 6172e4360f60..a19f021f081a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file ./include/asm/setup.h as COMMAND_LINE_SIZE. - acpi= [HW,ACPI,X86-64,i386] + acpi= [HW,ACPI,X86] Advanced Configuration and Power Interface Format: { force | off | ht | strict | noirq | rsdt } force -- enable ACPI if default was off @@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi_osi="!string2" # remove built-in string2 acpi_osi= # disable all strings - acpi_pm_good [X86-32,X86-64] + acpi_pm_good [X86] Override the pmtimer bug detection: force the kernel to assume that this machine's pmtimer latches its value and always returns good values. @@ -459,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file Also note the kernel might malfunction if you disable some critical bits. - code_bytes [IA32/X86_64] How many bytes of object code to print + code_bytes [X86] How many bytes of object code to print in an oops report. Range: 0 - 8192 Default: 64 @@ -592,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file MTRR settings. This parameter disables that behavior, possibly causing your machine to run very slowly. - disable_timer_pin_1 [i386,x86-64] + disable_timer_pin_1 [X86] Disable PIN 1 of APIC timer Can be useful to work around chipset bugs. @@ -624,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file UART at the specified I/O port or MMIO address. The options are the same as for ttyS, above. - earlyprintk= [X86-32,X86-64,SH,BLACKFIN] + earlyprintk= [X86,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] earlyprintk=dbgp @@ -659,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/block/as-iosched.txt and Documentation/block/deadline-iosched.txt for details. - elfcorehdr= [IA64,PPC,SH,X86-32,X86_64] + elfcorehdr= [IA64,PPC,SH,X86] Specifies physical address of start of kernel core image elf header. Generally kexec loader will pass this option to capture kernel. @@ -938,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file See comment before marvel_specify_io7 in arch/alpha/kernel/core_marvel.c. - io_delay= [X86-32,X86-64] I/O delay method + io_delay= [X86] I/O delay method 0x80 Standard port 0x80 based delay 0xed @@ -1000,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file keepinitrd [HW,ARM] - kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter specifies the amount of memory usable by the kernel for non-movable allocations. The requested amount is spread evenly throughout all nodes in the system. The @@ -1034,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. - kstack=N [X86-32,X86-64] Print N words from the kernel stack + kstack=N [X86] Print N words from the kernel stack in oops dumps. l2cr= [PPC] @@ -1044,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file lapic [X86-32,APIC] Enable the local APIC even if BIOS disabled it. - lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer + lapic_timer_c2_ok [X86,APIC] trust the local apic timer in C2 power state. libata.dma= [LIBATA] DMA control @@ -1229,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file [KNL,SH] Allow user to override the default size for per-device physically contiguous DMA buffers. - memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact + memmap=exactmap [KNL,X86] Enable setting of an exact E820 memory map, as specified by the user. Such memmap=exactmap lines can be constructed based on BIOS output or other requirements. See the memmap=nn@ss @@ -1320,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file mousedev.yres= [MOUSE] Vertical screen resolution, used for devices reporting absolute coordinates, such as tablets - movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter is similar to kernelcore except it specifies the amount of memory used for migratable allocations. If both kernelcore and movablecore is specified, @@ -1422,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file when a NMI is triggered. Format: [state][,regs][,debounce][,die] - nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels + nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels Format: [panic,][num] Valid num: 0,1,2 0 - turn nmi_watchdog off @@ -1475,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file nodsp [SH] Disable hardware DSP at boot time. - noefi [X86-32,X86-64] Disable EFI runtime services support. + noefi [X86] Disable EFI runtime services support. noexec [IA-64] - noexec [X86-32,X86-64] + noexec [X86] On X86-32 available only on PAE configured kernels. noexec=on: enable non-executable mappings (default) noexec=off: disable non-executable mappings @@ -1525,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources. - no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for + no_timer_check [X86,APIC] Disables the code which tests for broken timer IRQ sources. noisapnp [ISAPNP] Disables ISA PnP code. @@ -1689,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file disable the use of PCIE advanced error reporting. nodomains [PCI] Disable support for multiple PCI root domains (aka PCI segments, in ACPI-speak). - nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI + nommconf [X86] Disable use of MMCONFIG for PCI Configuration nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to @@ -2380,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file reported either. unknown_nmi_panic - [X86-32,X86-64] + [X86] Set unknown_nmi_panic=1 early on boot. usbcore.autosuspend= @@ -2447,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file medium is write-protected). Example: quirks=0419:aaf5:rl,0421:0433:rc - vdso= [X86-32,SH,x86-64] + vdso= [X86,SH] vdso=2: enable compat VDSO (default with COMPAT_VDSO) vdso=1: enable VDSO (default) vdso=0: disable VDSO mapping - vdso32= [X86-32,X86-64] + vdso32= [X86] vdso32=2: enable compat VDSO (default with COMPAT_VDSO) vdso32=1: enable 32-bit VDSO (default) vdso32=0: disable 32-bit VDSO mapping diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 5ede7473b425..08762750f121 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa. To add ARP targets: # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target - NOTE: up to 10 target addresses may be specified. + NOTE: up to 16 target addresses may be specified. To remove an ARP target: # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d821694..0beac8a7f8f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -543,6 +543,14 @@ S: Maintained F: arch/arm/lib/floppydma.S F: arch/arm/include/asm/floppy.h +ARM PORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/ + ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan F: drivers/mmc/host/mmci.* @@ -592,6 +600,13 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/CLKDEV SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +F: arch/arm/common/clkdev.c +F: arch/arm/include/asm/clkdev.h + ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT P: Mike Rapoport M: mike@compulab.co.il @@ -610,6 +625,15 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained +ARM/EBSA110 MACHINE SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/mach-ebsa110/ +F: drivers/net/arm/am79c961a.* + ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) P: Daniel Ribeiro M: drwyrm@gmail.com @@ -627,6 +651,15 @@ M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/FOOTBRIDGE ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/include/asm/hardware/dec21285.h +F: arch/arm/mach-footbridge/ + ARM/FREESCALE IMX / MXC ARM ARCHITECTURE P: Sascha Hauer M: kernel@pengutronix.de @@ -767,19 +800,27 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/RISCPC ARCHITECTURE +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/common/time-acorn.c +F: arch/arm/include/asm/hardware/entry-macro-iomd.S +F: arch/arm/include/asm/hardware/ioc.h +F: arch/arm/include/asm/hardware/iomd.h +F: arch/arm/include/asm/hardware/memc.h +F: arch/arm/mach-rpc/ +F: drivers/net/arm/ether* +F: drivers/scsi/arm/ + ARM/SHARK MACHINE SUPPORT P: Alexander Schulz M: alex@shark-linux.de W: http://www.shark-linux.de/shark.html S: Maintained -ARM/STRONGARM110 PORT -P: Russell King -M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -W: http://www.arm.linux.org.uk/ -S: Maintained - ARM/S3C2410 ARM ARCHITECTURE P: Ben Dooks M: ben-linux@fluff.org @@ -813,6 +854,14 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.mcuos.com S: Maintained +ARM/VFP SUPPORT +P: Russell King +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://www.arm.linux.org.uk/ +S: Maintained +F: arch/arm/vfp/ + ARPD SUPPORT P: Jonathan Layes L: netdev@vger.kernel.org @@ -1372,6 +1421,11 @@ S: Maintained F: Documentation/input/cs461x.txt F: sound/pci/cs46xx/ +CLK API +P: Russell King +M: linux@arm.linux.org.uk +F: include/linux/clk.h + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu @@ -1576,7 +1630,8 @@ F: drivers/infiniband/hw/cxgb3/ CYBERPRO FB DRIVER P: Russell King -M: rmk@arm.linux.org.uk +M: linux@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://www.arm.linux.org.uk/ S: Maintained F: drivers/video/cyber2000fb.* @@ -3917,19 +3972,12 @@ F: Documentation/blockdev/nbd.txt F: drivers/block/nbd.c F: include/linux/nbd.h -NETWORK DEVICE DRIVERS -P: Jeff Garzik -M: jgarzik@pobox.com -L: netdev@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git -S: Maintained -F: drivers/net/ - NETWORKING [GENERAL] -P: Networking Team -M: netdev@vger.kernel.org +P: David S. Miller +M: davem@davemloft.net L: netdev@vger.kernel.org W: http://linux-net.osdl.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index ecf0bfbab107..b2a781d9ce05 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig deleted file mode 100644 index bcd95b8dd2df..000000000000 --- a/arch/arm/configs/imx27ads_defconfig +++ /dev/null @@ -1,826 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:29:34 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX2=y -# CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# -CONFIG_MACH_MX27=y - -# -# MX2 Platforms -# -CONFIG_MACH_MX27ADS=y -# CONFIG_MACH_PCM038 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_VFP is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_FEC_OLD is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_IMX is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig index e05271753e15..0200d67e30ba 100644 --- a/arch/arm/configs/mx31ads_defconfig +++ b/arch/arm/configs/mx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:21:11 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:11:33 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set +CONFIG_ARCH_MX1ADS=y # # Freescale MXC Implementations # +CONFIG_ARCH_MX1=y # CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y +# CONFIG_ARCH_MX3 is not set # -# MX3 Options +# MX1 platforms: # -CONFIG_MACH_MX31ADS=y -# CONFIG_MACH_PCM037 is not set +CONFIG_MACH_MXLADS=y +CONFIG_MACH_SCB9328=y +CONFIG_MXC_IRQ_PRIOR=y +# CONFIG_MXC_PWM is not set # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_OUTER_CACHE is not set # @@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,30 +263,41 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # -CONFIG_VFP=y +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -283,11 +306,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -446,17 +455,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -502,7 +537,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# # # SPI GPIO expanders: # -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # -# Sound +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_IMX=y +CONFIG_USB_IMX=y +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + # -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -643,6 +854,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_HW is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig index 41429a00f58c..083516cd0d7f 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Fri Jun 20 16:38:36 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 10:18:06 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -88,11 +99,10 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set CONFIG_ARCH_MX2=y # CONFIG_ARCH_MX3 is not set - -# -# MX2 family CPU support -# +# CONFIG_MACH_MX21 is not set CONFIG_MACH_MX27=y # -# MX2 Platforms +# MX2 platforms: # -# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y CONFIG_MACH_PCM970_BASEBOARD=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type @@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set # CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y # # Bus support @@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -255,30 +268,44 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set @@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x00000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -452,6 +478,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set -CONFIG_FEC_OLD=y +CONFIG_FEC=y +# CONFIG_FEC2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA8290=y CONFIG_MEDIA_TUNER_TDA9887=y @@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y CONFIG_MEDIA_TUNER_MT20XX=y CONFIG_MEDIA_TUNER_XC2028=y CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set # CONFIG_SOC_CAMERA is not set # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -732,8 +829,12 @@ CONFIG_FB=y # # Frame buffer hardware drivers # +CONFIG_FB_IMX=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -844,6 +974,11 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # @@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig index 4f41c4135685..72a8201a5370 100644 --- a/arch/arm/configs/mx31litekit_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -1,17 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 14:23:39 2008 +# Linux kernel version: 2.6.30-rc1 +# Wed Apr 8 11:06:37 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,11 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,27 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -85,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -97,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -116,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -126,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -142,46 +150,54 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Freescale MXC Implementations # +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set CONFIG_ARCH_MX3=y +CONFIG_ARCH_MX31=y # -# MX3 Options +# MX3 platforms: # -# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_PCM037=y CONFIG_MACH_MX31LITE=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MXC_IRQ_PRIOR=y +CONFIG_MXC_PWM=y # # Processor Type # CONFIG_CPU_32=y CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y @@ -200,45 +216,50 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_L2X0=y +CONFIG_COMMON_CLKDEV=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -# CONFIG_PCMCIA is not set - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -251,33 +272,42 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -286,11 +316,6 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,12 +334,11 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" @@ -327,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,7 +361,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,14 +374,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -369,18 +390,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -404,36 +423,31 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set +CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set # CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_RAM=y +# CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set @@ -451,18 +465,15 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -476,63 +487,58 @@ CONFIG_HAVE_IDE=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_NONISA_IRQ=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -541,16 +547,10 @@ CONFIG_MII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # -# USB Network Adapters +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -562,43 +562,7 @@ CONFIG_MII=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -609,10 +573,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -624,45 +585,132 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Watchdog Device Drivers +# Memory mapped GPIO expanders: # -# CONFIG_SOFT_WATCHDOG is not set # -# USB-based Watchdog Cards +# I2C GPIO expanders: # -# CONFIG_USBPCWATCHDOG is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set # -# Sonics Silicon Backplane +# PCI GPIO expanders: # + +# +# SPI GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +CONFIG_MFD_WM8350=y +CONFIG_MFD_WM8350_CONFIG_MODE_0=y +CONFIG_MFD_WM8352_CONFIG_MODE_0=y +CONFIG_MFD_WM8350_I2C=y +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -673,7 +721,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_ALLOW_V4L1=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=y @@ -682,34 +730,38 @@ CONFIG_VIDEO_MEDIA=y # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_MT9M001=y +CONFIG_SOC_CAMERA_MT9M111=y +CONFIG_SOC_CAMERA_MT9T031=y +CONFIG_SOC_CAMERA_MT9V022=y +CONFIG_SOC_CAMERA_TW9910=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_MX3=y +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set # # Graphics support @@ -719,9 +771,10 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -739,131 +792,79 @@ CONFIG_FB=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# Miscellaneous USB options +# MMC/SD/SDIO Card Drivers # -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# USB Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_MXC=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# USB port drivers +# DMA Devices # -# CONFIG_USB_SERIAL is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_DMA_ENGINE=y # -# USB Miscellaneous drivers +# DMA Clients # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_WM8350=y # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -873,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set @@ -890,15 +896,13 @@ CONFIG_INOTIFY_USER=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -917,25 +921,30 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -954,65 +963,70 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1027,7 +1041,7 @@ CONFIG_CRYPTO=y # # Block modes # -# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set @@ -1046,8 +1060,12 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1064,7 +1082,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set +CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set @@ -1077,24 +1095,31 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -CONFIG_CRC_CCITT=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig deleted file mode 100644 index 6e37c77c4760..000000000000 --- a/arch/arm/configs/pcm037_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 25 11:52:42 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_PCM037=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_SMSC911X=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 65a583ee5df8..2d58b8fe59be 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,9 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 16:59:23 2008 +# Linux kernel version: 2.6.30-rc2 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set @@ -12,6 +12,7 @@ CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -21,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -41,11 +41,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=m CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,31 +63,36 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -88,11 +102,11 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,12 +114,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -119,7 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System Type @@ -129,11 +141,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -145,26 +156,38 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set CONFIG_PLAT_S3C24XX=y +CONFIG_S3C2410_CLOCK=y +CONFIG_S3C24XX_DCLK=y CONFIG_CPU_S3C244X=y -# CONFIG_S3C24XX_PWM is not set +CONFIG_S3C24XX_PWM=y +CONFIG_S3C24XX_GPIO_EXTRA=128 +CONFIG_S3C24XX_GPIO_EXTRA64=y +CONFIG_S3C24XX_GPIO_EXTRA128=y CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C24XX_ADC=y CONFIG_MACH_SMDK=y CONFIG_PLAT_S3C=y CONFIG_CPU_LLSERIAL_S3C2410=y @@ -174,7 +197,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # Boot options # # CONFIG_S3C_BOOT_WATCHDOG is not set -# CONFIG_S3C_BOOT_ERROR_RESET is not set +CONFIG_S3C_BOOT_ERROR_RESET=y +CONFIG_S3C_BOOT_UART_FORCE_FIFO=y # # Power management @@ -182,6 +206,8 @@ CONFIG_CPU_LLSERIAL_S3C2440=y # CONFIG_S3C2410_PM_DEBUG is not set # CONFIG_S3C2410_PM_CHECK is not set CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_DEV_HSMMC=y # # S3C2400 Machines @@ -190,7 +216,6 @@ CONFIG_CPU_S3C2410=y CONFIG_CPU_S3C2410_DMA=y CONFIG_S3C2410_PM=y CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y CONFIG_SIMTEC_NOR=y CONFIG_MACH_BAST_IDE=y @@ -205,7 +230,7 @@ CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y CONFIG_BAST_PC104_IRQ=y -# CONFIG_MACH_TCT_HAMMER is not set +CONFIG_MACH_TCT_HAMMER=y CONFIG_MACH_VR1000=y CONFIG_MACH_QT2410=y CONFIG_CPU_S3C2412=y @@ -215,10 +240,11 @@ CONFIG_S3C2412_PM=y # # S3C2412 Machines # -# CONFIG_MACH_JIVE is not set +CONFIG_MACH_JIVE=y +# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y -# CONFIG_MACH_SMDK2412 is not set +CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y CONFIG_CPU_S3C2440=y CONFIG_S3C2440_DMA=y @@ -232,7 +258,7 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y -# CONFIG_MACH_AT2440EVB is not set +CONFIG_MACH_AT2440EVB=y CONFIG_CPU_S3C2442=y # @@ -286,25 +312,31 @@ CONFIG_ISA=y # # Kernel Features # -# CONFIG_TICK_ONESHOT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT is not set CONFIG_HZ=200 # CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -317,6 +349,11 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -332,6 +369,8 @@ CONFIG_FPE_NWFPE_XP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=y # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set @@ -346,10 +385,6 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=m CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -359,11 +394,13 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -372,15 +409,16 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y @@ -388,8 +426,25 @@ CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m @@ -413,12 +468,181 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +# CONFIG_IP_VS_PROTO_TCP is not set +# CONFIG_IP_VS_PROTO_UDP is not set +# CONFIG_IP_VS_PROTO_ESP is not set +# CONFIG_IP_VS_PROTO_AH is not set + +# +# IPVS scheduler +# +# CONFIG_IP_VS_RR is not set +# CONFIG_IP_VS_WRR is not set +# CONFIG_IP_VS_LC is not set +# CONFIG_IP_VS_WLC is not set +# CONFIG_IP_VS_LBLC is not set +# CONFIG_IP_VS_LBLCR is not set +# CONFIG_IP_VS_DH is not set +# CONFIG_IP_VS_SH is not set +# CONFIG_IP_VS_SED is not set +# CONFIG_IP_VS_NQ is not set + +# +# IPVS application helper +# + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -428,8 +652,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_SCH_FIFO=y +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -451,8 +677,8 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -462,35 +688,26 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" -CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set -# CONFIG_IEEE80211 is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -504,7 +721,9 @@ CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -513,6 +732,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -545,7 +765,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -CONFIG_MTD_MAP_BANK_WIDTH_16=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y @@ -566,8 +786,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_BAST=y -CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_PLATRAM is not set # @@ -590,6 +808,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_DEBUG is not set @@ -602,6 +821,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -620,7 +844,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -628,32 +852,40 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_93CX6=m CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_PLATFORM=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -699,6 +931,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -711,11 +945,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -731,9 +967,14 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set CONFIG_DM9000=y -# CONFIG_ENC28J60 is not set CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -742,11 +983,14 @@ CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # CONFIG_TR is not set @@ -755,7 +999,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -778,7 +1025,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -789,7 +1036,7 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -808,20 +1055,88 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_JOYSTICK_ANALOG=m +CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADI=m +CONFIG_JOYSTICK_COBRA=m +CONFIG_JOYSTICK_GF2K=m +CONFIG_JOYSTICK_GRIP=m +CONFIG_JOYSTICK_GRIP_MP=m +CONFIG_JOYSTICK_GUILLEMOT=m +CONFIG_JOYSTICK_INTERACT=m +CONFIG_JOYSTICK_SIDEWINDER=m +CONFIG_JOYSTICK_TMDC=m +CONFIG_JOYSTICK_IFORCE=m +# CONFIG_JOYSTICK_IFORCE_USB is not set +# CONFIG_JOYSTICK_IFORCE_232 is not set +# CONFIG_JOYSTICK_WARRIOR is not set +CONFIG_JOYSTICK_MAGELLAN=m +CONFIG_JOYSTICK_SPACEORB=m +CONFIG_JOYSTICK_SPACEBALL=m +CONFIG_JOYSTICK_STINGER=m +CONFIG_JOYSTICK_TWIDJOY=m +CONFIG_JOYSTICK_ZHENHUA=m +CONFIG_JOYSTICK_DB9=m +CONFIG_JOYSTICK_GAMECON=m +CONFIG_JOYSTICK_TURBOGRAFX=m +CONFIG_JOYSTICK_JOYDUMP=m +CONFIG_JOYSTICK_XPAD=m +CONFIG_JOYSTICK_XPAD_FF=y +CONFIG_JOYSTICK_XPAD_LEDS=y # CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ATI_REMOTE=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # # Hardware I/O ports @@ -831,12 +1146,15 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -877,14 +1195,17 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C2410=y CONFIG_SERIAL_S3C2412=y CONFIG_SERIAL_S3C2440=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y @@ -892,7 +1213,7 @@ CONFIG_PRINTER=y CONFIG_PPDEV=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -901,33 +1222,44 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # -# CONFIG_I2C_ELEKTOR is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y CONFIG_I2C_SIMTEC=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -943,6 +1275,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_GPIO=m # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_S3C24XX=m CONFIG_SPI_S3C24XX_GPIO=m @@ -950,44 +1283,56 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPI_TLE62X0=m +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set # -# GPIO Support +# Memory mapped GPIO expanders: # -# CONFIG_DEBUG_GPIO is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # +# PCI GPIO expanders: +# + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1003,10 +1348,16 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -1022,7 +1373,10 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1043,20 +1397,33 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1065,14 +1432,189 @@ CONFIG_MFD_SM501=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_VIVI=m +CONFIG_VIDEO_PMS=m +CONFIG_VIDEO_BWQCAM=m +CONFIG_VIDEO_CQCAM=m +CONFIG_VIDEO_W9966=m +CONFIG_VIDEO_CPIA=m +CONFIG_VIDEO_CPIA_PP=m +CONFIG_VIDEO_CPIA_USB=m +CONFIG_VIDEO_CPIA2=m +CONFIG_VIDEO_SAA5246A=m +CONFIG_VIDEO_SAA5249=m +CONFIG_VIDEO_AU0828=m +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_CADET=m +CONFIG_RADIO_RTRACK=m +CONFIG_RADIO_RTRACK2=m +CONFIG_RADIO_AZTECH=m +CONFIG_RADIO_GEMTEK=m +CONFIG_RADIO_SF16FMI=m +CONFIG_RADIO_SF16FMR2=m +CONFIG_RADIO_TERRATEC=m +CONFIG_RADIO_TRUST=m +CONFIG_RADIO_TYPHOON=m +CONFIG_RADIO_TYPHOON_PROC_FS=y +CONFIG_RADIO_ZOLTRIX=m +CONFIG_USB_DSBR=m +CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m +CONFIG_RADIO_TEA5764=m +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +# CONFIG_DVB_USB_A800 is not set +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +# CONFIG_DVB_USB_GL861 is not set +# CONFIG_DVB_USB_AU6610 is not set +# CONFIG_DVB_USB_DIGITV is not set +# CONFIG_DVB_USB_VP7045 is not set +# CONFIG_DVB_USB_VP702X is not set +# CONFIG_DVB_USB_GP8PSK is not set +# CONFIG_DVB_USB_NOVA_T_USB2 is not set +# CONFIG_DVB_USB_TTUSB2 is not set +# CONFIG_DVB_USB_DTT200U is not set +# CONFIG_DVB_USB_OPERA1 is not set +CONFIG_DVB_USB_AF9005=m +# CONFIG_DVB_USB_AF9005_REMOTE is not set +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_USB_CE6230 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DVB_CX22702=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DAB=y +CONFIG_USB_DABUSB=m # # Graphics support @@ -1082,6 +1624,7 @@ CONFIG_MFD_SM501=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1105,7 +1648,19 @@ CONFIG_FB_S3C2410=y # CONFIG_FB_S3C2410_DEBUG is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m # # Display device support @@ -1125,11 +1680,54 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set - -# -# Sound -# -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_S3C24XX_SOC=y +CONFIG_SND_S3C24XX_SOC_I2S=m +CONFIG_SND_S3C_I2SV2_SOC=m +CONFIG_SND_S3C2412_SOC_I2S=m +CONFIG_SND_S3C2443_SOC_AC97=m +CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m +CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m +CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m +CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +CONFIG_SND_SOC_L3=m +CONFIG_SND_SOC_UDA134X=m +CONFIG_SND_SOC_WM8750=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1139,12 +1737,12 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # -# USB HID Boot Protocol drivers +# Special HID drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_HID_APPLE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1161,19 +1759,26 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1181,53 +1786,51 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m # # USB port drivers # -# CONFIG_USB_USS720 is not set +CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1251,42 +1854,71 @@ CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_LD=m -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SPI=m +CONFIG_MMC_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m @@ -1295,7 +1927,14 @@ CONFIG_LEDS_CLASS=m # CONFIG_LEDS_S3C24XX=m CONFIG_LEDS_H1940=m -# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_PCA9532=m +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_PCA955X=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_BD2802=m # # LED Triggers @@ -1304,7 +1943,13 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m # CONFIG_LEDS_TRIGGER_IDE_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1335,31 +1980,43 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_S3C=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1370,27 +2027,40 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=m CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -1416,15 +2086,13 @@ CONFIG_NTFS_FS=m # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1444,27 +2112,49 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1546,6 +2236,11 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1565,14 +2260,39 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1586,19 +2306,29 @@ CONFIG_DEBUG_S3C_UART=0 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1630,10 +2360,14 @@ CONFIG_CRYPTO_HMAC=m # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1663,23 +2397,37 @@ CONFIG_CRYPTO_DES=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 857f1dfac794..321c83e43a1e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -36,6 +36,8 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + unsigned long range_start; + unsigned long range_end; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) put_cpu_var(mmu_gathers); } -#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +/* + * Memorize the range for the TLB flush. + */ +static inline void +tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} /* * In the case of tlb vma handling, we can optimise these away in the @@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) + if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } } static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm) - flush_tlb_range(vma, vma->vm_start, vma->vm_end); + if (!tlb->fullmm && tlb->range_end > 0) + flush_tlb_range(vma, tlb->range_start, tlb->range_end); } #define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 42623db7f870..e04173c7e621 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -83,6 +83,7 @@ #include <linux/net.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> struct oldabi_stat64 { unsigned long long st_dev; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6d9152de6074..ae24486f858a 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -100,7 +100,7 @@ static unsigned int last_jiffy_time; #define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ) -static int ep93xx_timer_interrupt(int irq, void *dev_id) +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) { __raw_writel(1, EP93XX_TIMER1_CLEAR); while ((signed long) diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 7ae229bc1b79..e54057fb855b 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -28,9 +28,7 @@ #include <mach/common.h> #include <mach/imx-uart.h> #include <mach/irqs.h> -#ifdef CONFIG_I2C_IMX #include <mach/i2c.h> -#endif #include <mach/iomux.h> #include "devices.h" @@ -114,7 +112,6 @@ static struct platform_device flash_device = { * I2C */ -#ifdef CONFIG_I2C_IMX static int i2c_pins[] = { PA15_PF_I2C_SDA, PA16_PF_I2C_SCL, @@ -157,7 +154,6 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { .platform_data = &pcf857x_data[1], }, }; -#endif /* * Board init @@ -172,12 +168,10 @@ static void __init mx1ads_init(void) mxc_register_device(&flash_device, &mx1ads_flash_data); /* I2C */ -#ifdef CONFIG_I2C_IMX i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data); -#endif } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 2dee5c87614c..999d013e06e3 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -919,19 +919,19 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) - _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0]) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK(NULL, "usb", usb_clk[0]) _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0]) _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1]) - _REGISTER_CLOCK(NULL, "nfc", nfc_clk) + _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) _REGISTER_CLOCK(NULL, "dma", dma_clk[0]) _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk[0]) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0]) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) - _REGISTER_CLOCK(NULL, "i2c", i2c_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk) _REGISTER_CLOCK(NULL, "owire", owire_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index d6235583e979..194b8428bba4 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -19,6 +19,8 @@ config MACH_MX31ADS config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS + depends on MFD_WM8350_I2C + depends on REGULATOR_WM8350 select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 83e5e8e1276f..a6d6efefa6aa 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -102,7 +102,7 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static int uart_pins[] = { +static unsigned int uart_pins[] = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, @@ -452,6 +452,8 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) wm8350->codec.platform_data = &imx32ads_wm8350_setup; + regulator_has_full_constraints(); + return 0; } diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index c3648eff5137..b5227d837b2f 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -226,10 +226,10 @@ static void __init mxc_board_init(void) mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire"); mxc_register_device(&mxc_w1_master_device, NULL); - /* SMSC9215 IRQ pin */ + /* LAN9217 IRQ pin */ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO), "pcm037-eth")) - gpio_direction_input(MX31_PIN_GPIO3_1); + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); #ifdef CONFIG_I2C_IMX i2c_register_board_info(1, pcm037_i2c_devices, diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c index 6c4283cec6f4..5a01e48fd8f1 100644 --- a/arch/arm/mach-mx3/qong.c +++ b/arch/arm/mach-mx3/qong.c @@ -251,32 +251,6 @@ static void __init qong_init_fpga(void) } /* - * This structure defines the MX31 memory map. - */ -static struct map_desc qong_io_desc[] __initdata = { - { - .virtual = AIPS1_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), - .length = AIPS1_SIZE, - .type = MT_DEVICE_NONSHARED - }, { - .virtual = AIPS2_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), - .length = AIPS2_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -/* - * Set up static virtual mappings. - */ -static void __init qong_map_io(void) -{ - mxc_map_io(); - iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc)); -} - -/* * Board specific initialization. */ static void __init mxc_board_init(void) @@ -305,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .phys_io = AIPS1_BASE_ADDR, .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x100, - .map_io = qong_map_io, + .map_io = mxc_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, .timer = &qong_timer, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 67611dadb44e..bc0f73fbd4ca 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -28,7 +28,6 @@ #include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> -#include <linux/delay.h> #include <media/soc_camera.h> @@ -644,8 +643,9 @@ static struct pxa2xx_spi_master em_x270_spi_info = { }; static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { - .rx_threshold = 1, - .tx_threshold = 1, + .rx_threshold = 1, + .tx_threshold = 1, + .gpio_cs = -1, }; static struct tdo24m_platform_data em_x270_tdo24m_pdata = { diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3465268ca716..485fede83d97 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -15,6 +15,9 @@ extern struct sys_timer pxa_timer; extern void __init pxa_init_irq(int irq_nr, int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 90230c6f9925..a88d7caff0d1 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -10,13 +10,13 @@ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin); #else -static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {} +static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {} #endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) extern void colibri_pxa3xx_init_lcd(int bl_pin); #else -static inline void colibri_pxa3xx_init_lcd(int) {} +static inline void colibri_pxa3xx_init_lcd(int bl_pin) {} #endif #if defined(CONFIG_AX88796) diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 052bfe788ada..d15662aba008 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -37,7 +37,6 @@ /* USB */ #define GPIO_NR_PALMT5_USB_DETECT_N 15 -#define GPIO_NR_PALMT5_USB_POWER 95 #define GPIO_NR_PALMT5_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 9f7d62fb4cbb..e74082c872e1 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -38,7 +38,6 @@ /* USB */ #define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 #define GPIO_NR_PALMTX_USB_PULLUP 93 /* LCD/BACKLIGHT */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 0680f1a575a3..d7f81068c613 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -72,7 +73,7 @@ static unsigned long palmt5_pin_config[] __initdata = { /* USB */ GPIO15_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* MATRIX KEYPAD */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, @@ -344,7 +345,7 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -490,9 +491,9 @@ static struct platform_device *devices[] __initdata = { /* setup udc GPIOs initial state */ static void __init palmt5_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); - gpio_free(GPIO_NR_PALMT5_USB_POWER); + if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMT5_USB_PULLUP); } } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 59d0c1cba556..14393d0ad8b8 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -64,6 +64,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, /* IrDA */ GPIO40_GPIO, /* ir disable */ @@ -75,7 +76,7 @@ static unsigned long palmtx_pin_config[] __initdata = { /* USB */ GPIO13_GPIO, /* usb detect */ - GPIO95_GPIO, /* usb power */ + GPIO93_GPIO, /* usb power */ /* PCMCIA */ GPIO48_nPOE, @@ -359,7 +360,7 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = { static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = { .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N, .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTX_USB_POWER, + .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP, .gpio_pullup_inverted = 0, }; @@ -514,9 +515,9 @@ static void __init palmtx_map_io(void) /* setup udc GPIOs initial state */ static void __init palmtx_udc_init(void) { - if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) { - gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1); - gpio_free(GPIO_NR_PALMTX_USB_POWER); + if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTX_USB_PULLUP); } } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 332bd3263eaf..8f0d37d43b43 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -52,7 +52,6 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/udc.h> -#include <plat/iic.h> static struct map_desc jive_iodesc[] __initdata = { }; @@ -278,7 +277,7 @@ __setup("mtdset=", jive_mtdset); #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) -struct s3c2410fb_display jive_vgg2432a4_display[] = { +static struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, @@ -311,7 +310,7 @@ struct s3c2410fb_display jive_vgg2432a4_display[] = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info jive_lcd_config = { +static struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index b05d56e230a1..9c6abf9fb540 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -243,7 +243,7 @@ static struct s3c2410_platform_nand anubis_nand_info = { /* IDE channels */ -struct pata_platform_info anubis_ide_platdata = { +static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 41a00f57e5da..c8a46685ce38 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -413,7 +413,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = osiris_map_io, - .init_machine = osiris_init, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 25f7935576f8..7f473e47e4f1 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -166,6 +166,10 @@ static void __init smdk6410_machine_init(void) s3c_i2c1_set_platdata(NULL); s3c_fb_set_platdata(&smdk6410_lcd_pdata); + gpio_request(S3C64XX_GPN(5), "LCD power"); + gpio_request(S3C64XX_GPF(13), "LCD power"); + gpio_request(S3C64XX_GPF(15), "LCD power"); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 83fb72c4048a..599217b2e13f 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -27,6 +27,4 @@ struct imxuart_platform_data { unsigned int flags; }; -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - #endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index ab838cfe94f9..57e927a1fd3a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -518,6 +518,8 @@ enum iomux_pins { */ #define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) #define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) @@ -558,6 +560,16 @@ enum iomux_pins { #define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC) #define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC) +#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) +#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) +#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) #define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC) #define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC) @@ -585,6 +597,42 @@ enum iomux_pins { #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) #define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) +#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) +#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) +#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) +#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) +#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC) +#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC) /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0 * cspi1_ss1*/ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index c02b8fc2d821..518a36504b88 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -45,7 +45,7 @@ #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) -extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); +extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ #define FIQ_START 0 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index e8c4cf56c24e..8b070a041a99 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -54,9 +54,6 @@ #define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */ -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (6*32 + 16) - /* fixed interrupt numbers */ #define MXC_INT_USBCTRL 58 #define MXC_INT_USBCTRL 58 diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 6e7578a3514b..0fb68a531f55 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -50,23 +50,27 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#ifdef CONFIG_MXC_IRQ_PRIOR -void imx_irq_set_priority(unsigned char irq, unsigned char prio) +int imx_irq_set_priority(unsigned char irq, unsigned char prio) { +#ifdef CONFIG_MXC_IRQ_PRIOR unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq > 63) - return; + if (irq >= MXC_INTERNAL_IRQS) + return -EINVAL;; temp = __raw_readl(AVIC_NIPRIORITY(irq / 8)); temp &= ~mask; temp |= prio & mask; __raw_writel(temp, AVIC_NIPRIORITY(irq / 8)); + + return 0; +#else + return -ENOSYS; +#endif } EXPORT_SYMBOL(imx_irq_set_priority); -#endif #ifdef CONFIG_FIQ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c index 7642b975a998..08044dec9731 100644 --- a/arch/arm/plat-s3c/gpio-config.c +++ b/arch/arm/plat-s3c/gpio-config.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/gpio.h> #include <linux/io.h> @@ -38,6 +39,7 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) return ret; } +EXPORT_SYMBOL(s3c_gpio_cfgpin); int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { @@ -56,6 +58,7 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) return ret; } +EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index 6b1b5231511c..26f0cec3ac04 100644 --- a/arch/arm/plat-s3c/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -34,6 +34,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hwmon; extern struct platform_device s3c_device_hsmmc0; extern struct platform_device s3c_device_hsmmc1; extern struct platform_device s3c_device_hsmmc2; diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 9a5c767e0a42..91adfa71c172 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -100,7 +100,7 @@ static void s3c_adc_dbgshow(struct adc_device *adc) readl(adc->regs + S3C2410_ADCDLY)); } -void s3c_adc_try(struct adc_device *adc) +static void s3c_adc_try(struct adc_device *adc) { struct s3c_adc_client *next = adc->ts_pend; @@ -190,6 +190,23 @@ EXPORT_SYMBOL_GPL(s3c_adc_register); void s3c_adc_release(struct s3c_adc_client *client) { /* We should really check that nothing is in progress. */ + if (adc_dev->cur == client) + adc_dev->cur = NULL; + if (adc_dev->ts_pend == client) + adc_dev->ts_pend = NULL; + else { + struct list_head *p, *n; + struct s3c_adc_client *tmp; + + list_for_each_safe(p, n, &adc_pending) { + tmp = list_entry(p, struct s3c_adc_client, pend); + if (tmp == client) + list_del(&tmp->pend); + } + } + + if (adc_dev->cur == NULL) + s3c_adc_try(adc_dev); kfree(client); } EXPORT_SYMBOL_GPL(s3c_adc_release); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 94a341aaa4e4..5c0491bf738b 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <plat/gpio-core.h> +#include <mach/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/include/asm-h8300/timer.h b/arch/h8300/include/asm/timer.h index def80464d38f..def80464d38f 100644 --- a/include/asm-h8300/timer.h +++ b/arch/h8300/include/asm/timer.h diff --git a/include/asm-m32r/Kbuild b/arch/m32r/include/asm/Kbuild index c68e1680da01..c68e1680da01 100644 --- a/include/asm-m32r/Kbuild +++ b/arch/m32r/include/asm/Kbuild diff --git a/include/asm-m32r/addrspace.h b/arch/m32r/include/asm/addrspace.h index 81782c122da4..81782c122da4 100644 --- a/include/asm-m32r/addrspace.h +++ b/arch/m32r/include/asm/addrspace.h diff --git a/include/asm-m32r/assembler.h b/arch/m32r/include/asm/assembler.h index 26351539b5ff..26351539b5ff 100644 --- a/include/asm-m32r/assembler.h +++ b/arch/m32r/include/asm/assembler.h diff --git a/include/asm-m32r/atomic.h b/arch/m32r/include/asm/atomic.h index 2eed30f84080..2eed30f84080 100644 --- a/include/asm-m32r/atomic.h +++ b/arch/m32r/include/asm/atomic.h diff --git a/include/asm-m32r/auxvec.h b/arch/m32r/include/asm/auxvec.h index f76dcc860fae..f76dcc860fae 100644 --- a/include/asm-m32r/auxvec.h +++ b/arch/m32r/include/asm/auxvec.h diff --git a/include/asm-m32r/bitops.h b/arch/m32r/include/asm/bitops.h index aaddf0d57603..aaddf0d57603 100644 --- a/include/asm-m32r/bitops.h +++ b/arch/m32r/include/asm/bitops.h diff --git a/include/asm-m32r/bug.h b/arch/m32r/include/asm/bug.h index 4cc0462c15b8..4cc0462c15b8 100644 --- a/include/asm-m32r/bug.h +++ b/arch/m32r/include/asm/bug.h diff --git a/include/asm-m32r/bugs.h b/arch/m32r/include/asm/bugs.h index f77214eff136..f77214eff136 100644 --- a/include/asm-m32r/bugs.h +++ b/arch/m32r/include/asm/bugs.h diff --git a/include/asm-m32r/byteorder.h b/arch/m32r/include/asm/byteorder.h index 21855d8b028b..21855d8b028b 100644 --- a/include/asm-m32r/byteorder.h +++ b/arch/m32r/include/asm/byteorder.h diff --git a/include/asm-m32r/cache.h b/arch/m32r/include/asm/cache.h index 40b3ee98193d..40b3ee98193d 100644 --- a/include/asm-m32r/cache.h +++ b/arch/m32r/include/asm/cache.h diff --git a/include/asm-m32r/cachectl.h b/arch/m32r/include/asm/cachectl.h index 2aab8f6fff41..2aab8f6fff41 100644 --- a/include/asm-m32r/cachectl.h +++ b/arch/m32r/include/asm/cachectl.h diff --git a/include/asm-m32r/cacheflush.h b/arch/m32r/include/asm/cacheflush.h index 78587c958146..78587c958146 100644 --- a/include/asm-m32r/cacheflush.h +++ b/arch/m32r/include/asm/cacheflush.h diff --git a/include/asm-m32r/checksum.h b/arch/m32r/include/asm/checksum.h index a7a7c4f44abe..a7a7c4f44abe 100644 --- a/include/asm-m32r/checksum.h +++ b/arch/m32r/include/asm/checksum.h diff --git a/include/asm-m32r/cputime.h b/arch/m32r/include/asm/cputime.h index 0a47550df2b7..0a47550df2b7 100644 --- a/include/asm-m32r/cputime.h +++ b/arch/m32r/include/asm/cputime.h diff --git a/include/asm-m32r/current.h b/arch/m32r/include/asm/current.h index 7859d864f2c2..7859d864f2c2 100644 --- a/include/asm-m32r/current.h +++ b/arch/m32r/include/asm/current.h diff --git a/include/asm-m32r/delay.h b/arch/m32r/include/asm/delay.h index 9dd9e999ea69..9dd9e999ea69 100644 --- a/include/asm-m32r/delay.h +++ b/arch/m32r/include/asm/delay.h diff --git a/include/asm-m32r/device.h b/arch/m32r/include/asm/device.h index d8f9872b0e2d..d8f9872b0e2d 100644 --- a/include/asm-m32r/device.h +++ b/arch/m32r/include/asm/device.h diff --git a/include/asm-m32r/div64.h b/arch/m32r/include/asm/div64.h index 6cd978cefb28..6cd978cefb28 100644 --- a/include/asm-m32r/div64.h +++ b/arch/m32r/include/asm/div64.h diff --git a/include/asm-m32r/dma.h b/arch/m32r/include/asm/dma.h index 52f6a22dd232..52f6a22dd232 100644 --- a/include/asm-m32r/dma.h +++ b/arch/m32r/include/asm/dma.h diff --git a/include/asm-m32r/elf.h b/arch/m32r/include/asm/elf.h index 0cc34c94bf2b..0cc34c94bf2b 100644 --- a/include/asm-m32r/elf.h +++ b/arch/m32r/include/asm/elf.h diff --git a/include/asm-m32r/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h index 108d8c48e42e..108d8c48e42e 100644 --- a/include/asm-m32r/emergency-restart.h +++ b/arch/m32r/include/asm/emergency-restart.h diff --git a/include/asm-m32r/errno.h b/arch/m32r/include/asm/errno.h index 777149262aad..777149262aad 100644 --- a/include/asm-m32r/errno.h +++ b/arch/m32r/include/asm/errno.h diff --git a/include/asm-m32r/fb.h b/arch/m32r/include/asm/fb.h index d92e99cd8c8a..d92e99cd8c8a 100644 --- a/include/asm-m32r/fb.h +++ b/arch/m32r/include/asm/fb.h diff --git a/include/asm-m32r/fcntl.h b/arch/m32r/include/asm/fcntl.h index 46ab12db5739..46ab12db5739 100644 --- a/include/asm-m32r/fcntl.h +++ b/arch/m32r/include/asm/fcntl.h diff --git a/include/asm-m32r/flat.h b/arch/m32r/include/asm/flat.h index d851cf0c4aa5..d851cf0c4aa5 100644 --- a/include/asm-m32r/flat.h +++ b/arch/m32r/include/asm/flat.h diff --git a/include/asm-m32r/ftrace.h b/arch/m32r/include/asm/ftrace.h index 40a8c178f10d..40a8c178f10d 100644 --- a/include/asm-m32r/ftrace.h +++ b/arch/m32r/include/asm/ftrace.h diff --git a/include/asm-m32r/futex.h b/arch/m32r/include/asm/futex.h index 6a332a9f099c..6a332a9f099c 100644 --- a/include/asm-m32r/futex.h +++ b/arch/m32r/include/asm/futex.h diff --git a/include/asm-m32r/hardirq.h b/arch/m32r/include/asm/hardirq.h index cb8aa762f235..cb8aa762f235 100644 --- a/include/asm-m32r/hardirq.h +++ b/arch/m32r/include/asm/hardirq.h diff --git a/include/asm-m32r/hw_irq.h b/arch/m32r/include/asm/hw_irq.h index 7138537cda03..7138537cda03 100644 --- a/include/asm-m32r/hw_irq.h +++ b/arch/m32r/include/asm/hw_irq.h diff --git a/include/asm-m32r/io.h b/arch/m32r/include/asm/io.h index d06933bd6318..d06933bd6318 100644 --- a/include/asm-m32r/io.h +++ b/arch/m32r/include/asm/io.h diff --git a/include/asm-m32r/ioctl.h b/arch/m32r/include/asm/ioctl.h index b279fe06dfe5..b279fe06dfe5 100644 --- a/include/asm-m32r/ioctl.h +++ b/arch/m32r/include/asm/ioctl.h diff --git a/include/asm-m32r/ioctls.h b/arch/m32r/include/asm/ioctls.h index b9f54bb5d7cf..b9f54bb5d7cf 100644 --- a/include/asm-m32r/ioctls.h +++ b/arch/m32r/include/asm/ioctls.h diff --git a/include/asm-m32r/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h index 8d2d7c8ffdb0..8d2d7c8ffdb0 100644 --- a/include/asm-m32r/ipcbuf.h +++ b/arch/m32r/include/asm/ipcbuf.h diff --git a/include/asm-m32r/irq.h b/arch/m32r/include/asm/irq.h index 242028b4d86a..242028b4d86a 100644 --- a/include/asm-m32r/irq.h +++ b/arch/m32r/include/asm/irq.h diff --git a/include/asm-m32r/irq_regs.h b/arch/m32r/include/asm/irq_regs.h index 3dd9c0b70270..3dd9c0b70270 100644 --- a/include/asm-m32r/irq_regs.h +++ b/arch/m32r/include/asm/irq_regs.h diff --git a/include/asm-m32r/kdebug.h b/arch/m32r/include/asm/kdebug.h index 6ece1b037665..6ece1b037665 100644 --- a/include/asm-m32r/kdebug.h +++ b/arch/m32r/include/asm/kdebug.h diff --git a/include/asm-m32r/kmap_types.h b/arch/m32r/include/asm/kmap_types.h index fa94dc6410ea..fa94dc6410ea 100644 --- a/include/asm-m32r/kmap_types.h +++ b/arch/m32r/include/asm/kmap_types.h diff --git a/include/asm-m32r/linkage.h b/arch/m32r/include/asm/linkage.h index a9fb151cf648..a9fb151cf648 100644 --- a/include/asm-m32r/linkage.h +++ b/arch/m32r/include/asm/linkage.h diff --git a/include/asm-m32r/local.h b/arch/m32r/include/asm/local.h index 22256d138630..22256d138630 100644 --- a/include/asm-m32r/local.h +++ b/arch/m32r/include/asm/local.h diff --git a/include/asm-m32r/m32102.h b/arch/m32r/include/asm/m32102.h index 52807f8db166..52807f8db166 100644 --- a/include/asm-m32r/m32102.h +++ b/arch/m32r/include/asm/m32102.h diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h index 2dc89d68b6d9..2dc89d68b6d9 100644 --- a/include/asm-m32r/m32104ut/m32104ut_pld.h +++ b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h index aae810a4fb2c..aae810a4fb2c 100644 --- a/include/asm-m32r/m32700ut/m32700ut_lan.h +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h index 4c2489079788..4c2489079788 100644 --- a/include/asm-m32r/m32700ut/m32700ut_lcd.h +++ b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h index 57623beb44cb..57623beb44cb 100644 --- a/include/asm-m32r/m32700ut/m32700ut_pld.h +++ b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h diff --git a/include/asm-m32r/m32r.h b/arch/m32r/include/asm/m32r.h index 214b44b40757..214b44b40757 100644 --- a/include/asm-m32r/m32r.h +++ b/arch/m32r/include/asm/m32r.h diff --git a/include/asm-m32r/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h index 976d2b995919..976d2b995919 100644 --- a/include/asm-m32r/m32r_mp_fpga.h +++ b/arch/m32r/include/asm/m32r_mp_fpga.h diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h index 2624c9db7255..2624c9db7255 100644 --- a/include/asm-m32r/mappi2/mappi2_pld.h +++ b/arch/m32r/include/asm/mappi2/mappi2_pld.h diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h index 451c40ee70af..451c40ee70af 100644 --- a/include/asm-m32r/mappi3/mappi3_pld.h +++ b/arch/m32r/include/asm/mappi3/mappi3_pld.h diff --git a/include/asm-m32r/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h index aa1b7bf84f51..aa1b7bf84f51 100644 --- a/include/asm-m32r/mc146818rtc.h +++ b/arch/m32r/include/asm/mc146818rtc.h diff --git a/include/asm-m32r/mman.h b/arch/m32r/include/asm/mman.h index 516a8973b130..516a8973b130 100644 --- a/include/asm-m32r/mman.h +++ b/arch/m32r/include/asm/mman.h diff --git a/include/asm-m32r/mmu.h b/arch/m32r/include/asm/mmu.h index 150cb92bb666..150cb92bb666 100644 --- a/include/asm-m32r/mmu.h +++ b/arch/m32r/include/asm/mmu.h diff --git a/include/asm-m32r/mmu_context.h b/arch/m32r/include/asm/mmu_context.h index 91909e5dd9d0..91909e5dd9d0 100644 --- a/include/asm-m32r/mmu_context.h +++ b/arch/m32r/include/asm/mmu_context.h diff --git a/include/asm-m32r/mmzone.h b/arch/m32r/include/asm/mmzone.h index 9f3b5accda88..9f3b5accda88 100644 --- a/include/asm-m32r/mmzone.h +++ b/arch/m32r/include/asm/mmzone.h diff --git a/include/asm-m32r/module.h b/arch/m32r/include/asm/module.h index eb73ee011215..eb73ee011215 100644 --- a/include/asm-m32r/module.h +++ b/arch/m32r/include/asm/module.h diff --git a/include/asm-m32r/msgbuf.h b/arch/m32r/include/asm/msgbuf.h index 0d5a877b813e..0d5a877b813e 100644 --- a/include/asm-m32r/msgbuf.h +++ b/arch/m32r/include/asm/msgbuf.h diff --git a/include/asm-m32r/mutex.h b/arch/m32r/include/asm/mutex.h index 458c1f7fbc18..458c1f7fbc18 100644 --- a/include/asm-m32r/mutex.h +++ b/arch/m32r/include/asm/mutex.h diff --git a/include/asm-m32r/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h index a5f18dd1ab20..a5f18dd1ab20 100644 --- a/include/asm-m32r/opsput/opsput_lan.h +++ b/arch/m32r/include/asm/opsput/opsput_lan.h diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h index 369c9f0832a6..369c9f0832a6 100644 --- a/include/asm-m32r/opsput/opsput_lcd.h +++ b/arch/m32r/include/asm/opsput/opsput_lcd.h diff --git a/include/asm-m32r/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h index 3f11ea1aac2d..3f11ea1aac2d 100644 --- a/include/asm-m32r/opsput/opsput_pld.h +++ b/arch/m32r/include/asm/opsput/opsput_pld.h diff --git a/include/asm-m32r/page.h b/arch/m32r/include/asm/page.h index c9333089fe11..c9333089fe11 100644 --- a/include/asm-m32r/page.h +++ b/arch/m32r/include/asm/page.h diff --git a/include/asm-m32r/param.h b/arch/m32r/include/asm/param.h index 94c770196048..94c770196048 100644 --- a/include/asm-m32r/param.h +++ b/arch/m32r/include/asm/param.h diff --git a/include/asm-m32r/pci.h b/arch/m32r/include/asm/pci.h index fe785d167db6..fe785d167db6 100644 --- a/include/asm-m32r/pci.h +++ b/arch/m32r/include/asm/pci.h diff --git a/include/asm-m32r/percpu.h b/arch/m32r/include/asm/percpu.h index e3169301fe66..e3169301fe66 100644 --- a/include/asm-m32r/percpu.h +++ b/arch/m32r/include/asm/percpu.h diff --git a/include/asm-m32r/pgalloc.h b/arch/m32r/include/asm/pgalloc.h index f11a2b909cdb..f11a2b909cdb 100644 --- a/include/asm-m32r/pgalloc.h +++ b/arch/m32r/include/asm/pgalloc.h diff --git a/include/asm-m32r/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h index bca3475f9595..bca3475f9595 100644 --- a/include/asm-m32r/pgtable-2level.h +++ b/arch/m32r/include/asm/pgtable-2level.h diff --git a/include/asm-m32r/pgtable.h b/arch/m32r/include/asm/pgtable.h index e6359c566b50..e6359c566b50 100644 --- a/include/asm-m32r/pgtable.h +++ b/arch/m32r/include/asm/pgtable.h diff --git a/include/asm-m32r/poll.h b/arch/m32r/include/asm/poll.h index c98509d3149e..c98509d3149e 100644 --- a/include/asm-m32r/poll.h +++ b/arch/m32r/include/asm/poll.h diff --git a/include/asm-m32r/posix_types.h b/arch/m32r/include/asm/posix_types.h index b309c5858637..b309c5858637 100644 --- a/include/asm-m32r/posix_types.h +++ b/arch/m32r/include/asm/posix_types.h diff --git a/include/asm-m32r/processor.h b/arch/m32r/include/asm/processor.h index 1a997fc148a2..1a997fc148a2 100644 --- a/include/asm-m32r/processor.h +++ b/arch/m32r/include/asm/processor.h diff --git a/include/asm-m32r/ptrace.h b/arch/m32r/include/asm/ptrace.h index a0755b982028..a0755b982028 100644 --- a/include/asm-m32r/ptrace.h +++ b/arch/m32r/include/asm/ptrace.h diff --git a/include/asm-m32r/resource.h b/arch/m32r/include/asm/resource.h index b1ce766e37a0..b1ce766e37a0 100644 --- a/include/asm-m32r/resource.h +++ b/arch/m32r/include/asm/resource.h diff --git a/include/asm-m32r/rtc.h b/arch/m32r/include/asm/rtc.h index 0340633f3f4d..0340633f3f4d 100644 --- a/include/asm-m32r/rtc.h +++ b/arch/m32r/include/asm/rtc.h diff --git a/include/asm-m32r/s1d13806.h b/arch/m32r/include/asm/s1d13806.h index 248d36a82d79..248d36a82d79 100644 --- a/include/asm-m32r/s1d13806.h +++ b/arch/m32r/include/asm/s1d13806.h diff --git a/include/asm-m32r/scatterlist.h b/arch/m32r/include/asm/scatterlist.h index 1ed372c73d0b..1ed372c73d0b 100644 --- a/include/asm-m32r/scatterlist.h +++ b/arch/m32r/include/asm/scatterlist.h diff --git a/include/asm-m32r/sections.h b/arch/m32r/include/asm/sections.h index 5e5d21c4908a..5e5d21c4908a 100644 --- a/include/asm-m32r/sections.h +++ b/arch/m32r/include/asm/sections.h diff --git a/include/asm-m32r/segment.h b/arch/m32r/include/asm/segment.h index 42b11aeb3249..42b11aeb3249 100644 --- a/include/asm-m32r/segment.h +++ b/arch/m32r/include/asm/segment.h diff --git a/include/asm-m32r/sembuf.h b/arch/m32r/include/asm/sembuf.h index c9873d6890e2..c9873d6890e2 100644 --- a/include/asm-m32r/sembuf.h +++ b/arch/m32r/include/asm/sembuf.h diff --git a/include/asm-m32r/serial.h b/arch/m32r/include/asm/serial.h index 5ac244c72f15..5ac244c72f15 100644 --- a/include/asm-m32r/serial.h +++ b/arch/m32r/include/asm/serial.h diff --git a/include/asm-m32r/setup.h b/arch/m32r/include/asm/setup.h index c637ab992394..c637ab992394 100644 --- a/include/asm-m32r/setup.h +++ b/arch/m32r/include/asm/setup.h diff --git a/include/asm-m32r/shmbuf.h b/arch/m32r/include/asm/shmbuf.h index b0cdf0aa7d65..b0cdf0aa7d65 100644 --- a/include/asm-m32r/shmbuf.h +++ b/arch/m32r/include/asm/shmbuf.h diff --git a/include/asm-m32r/shmparam.h b/arch/m32r/include/asm/shmparam.h index 35986d81a528..35986d81a528 100644 --- a/include/asm-m32r/shmparam.h +++ b/arch/m32r/include/asm/shmparam.h diff --git a/include/asm-m32r/sigcontext.h b/arch/m32r/include/asm/sigcontext.h index da4a9c36d09b..da4a9c36d09b 100644 --- a/include/asm-m32r/sigcontext.h +++ b/arch/m32r/include/asm/sigcontext.h diff --git a/include/asm-m32r/siginfo.h b/arch/m32r/include/asm/siginfo.h index 7d9cd9ebfd0e..7d9cd9ebfd0e 100644 --- a/include/asm-m32r/siginfo.h +++ b/arch/m32r/include/asm/siginfo.h diff --git a/include/asm-m32r/signal.h b/arch/m32r/include/asm/signal.h index 1a607066bc64..1a607066bc64 100644 --- a/include/asm-m32r/signal.h +++ b/arch/m32r/include/asm/signal.h diff --git a/include/asm-m32r/smp.h b/arch/m32r/include/asm/smp.h index b96a6d2ffbc3..b96a6d2ffbc3 100644 --- a/include/asm-m32r/smp.h +++ b/arch/m32r/include/asm/smp.h diff --git a/include/asm-m32r/socket.h b/arch/m32r/include/asm/socket.h index be7ed589af5c..be7ed589af5c 100644 --- a/include/asm-m32r/socket.h +++ b/arch/m32r/include/asm/socket.h diff --git a/include/asm-m32r/sockios.h b/arch/m32r/include/asm/sockios.h index 6c1fb9b43bdb..6c1fb9b43bdb 100644 --- a/include/asm-m32r/sockios.h +++ b/arch/m32r/include/asm/sockios.h diff --git a/include/asm-m32r/spinlock.h b/arch/m32r/include/asm/spinlock.h index dded923883b2..dded923883b2 100644 --- a/include/asm-m32r/spinlock.h +++ b/arch/m32r/include/asm/spinlock.h diff --git a/include/asm-m32r/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h index 83f52105c0e4..83f52105c0e4 100644 --- a/include/asm-m32r/spinlock_types.h +++ b/arch/m32r/include/asm/spinlock_types.h diff --git a/include/asm-m32r/stat.h b/arch/m32r/include/asm/stat.h index da4518f82d6d..da4518f82d6d 100644 --- a/include/asm-m32r/stat.h +++ b/arch/m32r/include/asm/stat.h diff --git a/include/asm-m32r/statfs.h b/arch/m32r/include/asm/statfs.h index 6eb4c6007e6b..6eb4c6007e6b 100644 --- a/include/asm-m32r/statfs.h +++ b/arch/m32r/include/asm/statfs.h diff --git a/include/asm-m32r/string.h b/arch/m32r/include/asm/string.h index e61e2b0bfc1f..e61e2b0bfc1f 100644 --- a/include/asm-m32r/string.h +++ b/arch/m32r/include/asm/string.h diff --git a/include/asm-m32r/swab.h b/arch/m32r/include/asm/swab.h index 54dab001d6d1..54dab001d6d1 100644 --- a/include/asm-m32r/swab.h +++ b/arch/m32r/include/asm/swab.h diff --git a/include/asm-m32r/syscall.h b/arch/m32r/include/asm/syscall.h index 25f316f2b78d..25f316f2b78d 100644 --- a/include/asm-m32r/syscall.h +++ b/arch/m32r/include/asm/syscall.h diff --git a/include/asm-m32r/system.h b/arch/m32r/include/asm/system.h index c980f5ba8de7..c980f5ba8de7 100644 --- a/include/asm-m32r/system.h +++ b/arch/m32r/include/asm/system.h diff --git a/include/asm-m32r/termbits.h b/arch/m32r/include/asm/termbits.h index bc104008b55b..bc104008b55b 100644 --- a/include/asm-m32r/termbits.h +++ b/arch/m32r/include/asm/termbits.h diff --git a/include/asm-m32r/termios.h b/arch/m32r/include/asm/termios.h index 93ce79fd342a..93ce79fd342a 100644 --- a/include/asm-m32r/termios.h +++ b/arch/m32r/include/asm/termios.h diff --git a/include/asm-m32r/thread_info.h b/arch/m32r/include/asm/thread_info.h index 8589d462df27..8589d462df27 100644 --- a/include/asm-m32r/thread_info.h +++ b/arch/m32r/include/asm/thread_info.h diff --git a/include/asm-m32r/timex.h b/arch/m32r/include/asm/timex.h index bb9fe4feb12d..bb9fe4feb12d 100644 --- a/include/asm-m32r/timex.h +++ b/arch/m32r/include/asm/timex.h diff --git a/include/asm-m32r/tlb.h b/arch/m32r/include/asm/tlb.h index c7ebd8d48f3b..c7ebd8d48f3b 100644 --- a/include/asm-m32r/tlb.h +++ b/arch/m32r/include/asm/tlb.h diff --git a/include/asm-m32r/tlbflush.h b/arch/m32r/include/asm/tlbflush.h index 0ef95307784e..0ef95307784e 100644 --- a/include/asm-m32r/tlbflush.h +++ b/arch/m32r/include/asm/tlbflush.h diff --git a/include/asm-m32r/topology.h b/arch/m32r/include/asm/topology.h index d607eb32bd7e..d607eb32bd7e 100644 --- a/include/asm-m32r/topology.h +++ b/arch/m32r/include/asm/topology.h diff --git a/include/asm-m32r/types.h b/arch/m32r/include/asm/types.h index bc9f7fff0ac3..bc9f7fff0ac3 100644 --- a/include/asm-m32r/types.h +++ b/arch/m32r/include/asm/types.h diff --git a/include/asm-m32r/uaccess.h b/arch/m32r/include/asm/uaccess.h index 1c7047bea200..1c7047bea200 100644 --- a/include/asm-m32r/uaccess.h +++ b/arch/m32r/include/asm/uaccess.h diff --git a/include/asm-m32r/ucontext.h b/arch/m32r/include/asm/ucontext.h index 09324741eec3..09324741eec3 100644 --- a/include/asm-m32r/ucontext.h +++ b/arch/m32r/include/asm/ucontext.h diff --git a/include/asm-m32r/unaligned.h b/arch/m32r/include/asm/unaligned.h index 377eb20d1ec6..377eb20d1ec6 100644 --- a/include/asm-m32r/unaligned.h +++ b/arch/m32r/include/asm/unaligned.h diff --git a/include/asm-m32r/unistd.h b/arch/m32r/include/asm/unistd.h index cf701c933249..cf701c933249 100644 --- a/include/asm-m32r/unistd.h +++ b/arch/m32r/include/asm/unistd.h diff --git a/include/asm-m32r/user.h b/arch/m32r/include/asm/user.h index 03b3c11c2aff..03b3c11c2aff 100644 --- a/include/asm-m32r/user.h +++ b/arch/m32r/include/asm/user.h diff --git a/include/asm-m32r/vga.h b/arch/m32r/include/asm/vga.h index a1b63061c06f..a1b63061c06f 100644 --- a/include/asm-m32r/vga.h +++ b/arch/m32r/include/asm/vga.h diff --git a/include/asm-m32r/xor.h b/arch/m32r/include/asm/xor.h index 6d525259df3e..6d525259df3e 100644 --- a/include/asm-m32r/xor.h +++ b/arch/m32r/include/asm/xor.h diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h index 4fcf3384e259..aa6a38886391 100644 --- a/arch/mn10300/include/asm/bug.h +++ b/arch/mn10300/include/asm/bug.h @@ -11,10 +11,12 @@ #ifndef _ASM_BUG_H #define _ASM_BUG_H +#ifdef CONFIG_BUG + /* * Tell the user there is some problem. */ -#define _debug_bug_trap() \ +#define BUG() \ do { \ asm volatile( \ " syscall 15 \n" \ @@ -25,11 +27,11 @@ do { \ : \ : "i"(__FILE__), "i"(__LINE__) \ ); \ -} while (0) - -#define BUG() _debug_bug_trap() +} while (1) #define HAVE_ARCH_BUG +#endif /* CONFIG_BUG */ + #include <asm-generic/bug.h> #endif /* _ASM_BUG_H */ diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 543a4f98695d..fef5b434dadc 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -344,6 +344,8 @@ #define __NR_dup3 331 #define __NR_pipe2 332 #define __NR_inotify_init1 333 +#define __NR_preadv 334 +#define __NR_pwritev 335 #ifdef __KERNEL__ diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 34ab5a293153..3dc3e462f92a 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -723,6 +723,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 335 */ nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 71414e19fd16..79890edfd67a 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_bus(&_etext); data_resource.end = virt_to_bus(&_edata)-1; -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define PFN_PHYS(x) ((x) << PAGE_SHIFT) - start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT); kstart_pfn = PFN_UP(__pa(&_text)); free_pfn = PFN_UP(__pa(&_end)); diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 27b70d8a359c..aeb3cff95f63 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -176,7 +176,7 @@ static void __appldata_mod_vtimer_wrap(void *p) { struct vtimer_list *timer; u64 expires; } *args = p; - mod_virt_timer(args->timer, args->expires); + mod_virt_timer_periodic(args->timer, args->expires); } #define APPLDATA_ADD_TIMER 0 diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h new file mode 100644 index 000000000000..07836a2e5222 --- /dev/null +++ b/arch/s390/include/asm/cpuid.h @@ -0,0 +1,25 @@ +/* + * Copyright IBM Corp. 2000,2009 + * Author(s): Hartmut Penner <hp@de.ibm.com>, + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Christian Ehrhardt <ehrhardt@de.ibm.com> + */ + +#ifndef _ASM_S390_CPUID_H_ +#define _ASM_S390_CPUID_H_ + +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * Members of this structure are referenced in head.S, so think twice + * before touching them. [mj] + */ + +typedef struct +{ + unsigned int version : 8; + unsigned int ident : 24; + unsigned int machine : 16; + unsigned int unused : 16; +} __attribute__ ((packed)) cpuid_t; + +#endif /* _ASM_S390_CPUID_H_ */ diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index c6e674f5fca9..54ea39f96ecd 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -15,6 +15,7 @@ #define ASM_KVM_HOST_H #include <linux/kvm_host.h> #include <asm/debug.h> +#include <asm/cpuid.h> #define KVM_MAX_VCPUS 64 #define KVM_MEMORY_SLOTS 32 diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index b349f1c7fdfa..3aeca492b147 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -66,6 +66,7 @@ #define __LC_USER_EXEC_ASCE 0x02ac #define __LC_CPUID 0x02b0 #define __LC_INT_CLOCK 0x02c8 +#define __LC_MACHINE_FLAGS 0x02d8 #define __LC_IRB 0x0300 #define __LC_PFAULT_INTPARM 0x0080 #define __LC_CPU_TIMER_SAVE_AREA 0x00d8 @@ -110,6 +111,7 @@ #define __LC_CPUID 0x0320 #define __LC_INT_CLOCK 0x0340 #define __LC_VDSO_PER_CPU 0x0350 +#define __LC_MACHINE_FLAGS 0x0358 #define __LC_IRB 0x0380 #define __LC_PASTE 0x03c0 #define __LC_PFAULT_INTPARM 0x11b8 @@ -127,9 +129,9 @@ #ifndef __ASSEMBLY__ -#include <asm/processor.h> +#include <asm/cpuid.h> +#include <asm/ptrace.h> #include <linux/types.h> -#include <asm/sigp.h> void restart_int_handler(void); void ext_int_handler(void); @@ -277,7 +279,8 @@ struct _lowcore __u32 ext_call_fast; /* 0x02c4 */ __u64 int_clock; /* 0x02c8 */ __u64 clock_comparator; /* 0x02d0 */ - __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */ + __u32 machine_flags; /* 0x02d8 */ + __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */ /* Interrupt response block */ __u8 irb[64]; /* 0x0300 */ @@ -381,7 +384,8 @@ struct _lowcore __u64 int_clock; /* 0x0340 */ __u64 clock_comparator; /* 0x0348 */ __u64 vdso_per_cpu_data; /* 0x0350 */ - __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */ + __u64 machine_flags; /* 0x0358 */ + __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */ /* Interrupt response block. */ __u8 irb[64]; /* 0x0380 */ diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 61862b3ac794..c139fa7b8e89 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -14,7 +14,10 @@ #define __ASM_S390_PROCESSOR_H #include <linux/linkage.h> +#include <asm/cpuid.h> +#include <asm/page.h> #include <asm/ptrace.h> +#include <asm/setup.h> #ifdef __KERNEL__ /* @@ -23,20 +26,6 @@ */ #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; }) -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - * Members of this structure are referenced in head.S, so think twice - * before touching them. [mj] - */ - -typedef struct -{ - unsigned int version : 8; - unsigned int ident : 24; - unsigned int machine : 16; - unsigned int unused : 16; -} __attribute__ ((packed)) cpuid_t; - static inline void get_cpu_id(cpuid_t *ptr) { asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index f1b051630c50..539263fc9ab9 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -313,8 +313,6 @@ typedef struct #ifdef __KERNEL__ -#include <asm/setup.h> -#include <asm/page.h> /* * The pt_regs struct defines the way the registers are stored on diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index e8bd6ac22c99..38b0fc221ed7 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ +#include <asm/lowcore.h> #include <asm/types.h> #define PARMAREA 0x10400 @@ -63,7 +64,6 @@ extern unsigned int s390_noexec; /* * Machine features detected in head.S */ -extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) @@ -77,28 +77,28 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_HPAGE (1UL << 10) #define MACHINE_FLAG_PFMF (1UL << 11) -#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) -#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) -#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) +#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) +#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) +#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C) #ifndef __s390x__ -#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE) -#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP) +#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE) +#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP) #define MACHINE_HAS_IDTE (0) #define MACHINE_HAS_DIAG44 (1) -#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG) +#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG) #define MACHINE_HAS_MVCOS (0) #define MACHINE_HAS_HPAGE (0) #define MACHINE_HAS_PFMF (0) #else /* __s390x__ */ #define MACHINE_HAS_IEEE (1) #define MACHINE_HAS_CSP (1) -#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE) -#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44) +#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE) +#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44) #define MACHINE_HAS_MVPG (1) -#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS) -#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE) -#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF) +#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS) +#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE) +#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF) #endif /* __s390x__ */ #define ZFCPDUMP_HSA_SIZE (32UL<<20) diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index c544aa524535..461f2abd2e6f 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -31,8 +31,9 @@ #define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER) #ifndef __ASSEMBLY__ -#include <asm/processor.h> #include <asm/lowcore.h> +#include <asm/page.h> +#include <asm/processor.h> /* * low level task data that entry.S needs immediate access to diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h index e4bcab739c19..814243cafdfe 100644 --- a/arch/s390/include/asm/timer.h +++ b/arch/s390/include/asm/timer.h @@ -41,6 +41,7 @@ extern void init_virt_timer(struct vtimer_list *timer); extern void add_virt_timer(void *new); extern void add_virt_timer_periodic(void *new); extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires); +extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires); extern int del_virt_timer(struct vtimer_list *timer); extern void init_cpu_vtimer(void); diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index d744c3d62de5..cc21e3e20fd7 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -11,6 +11,9 @@ #ifndef _ASM_S390_TIMEX_H #define _ASM_S390_TIMEX_H +/* The value of the TOD clock for 1.1.1970. */ +#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL + /* Inline functions for clock register access. */ static inline int set_clock(__u64 time) { @@ -85,4 +88,6 @@ int get_sync_clock(unsigned long long *clock); void init_cpu_timer(void); unsigned long long monotonic_clock(void); +extern u64 sched_clock_base_cc; + #endif diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index c8ad350d1444..f0f19e6ace6c 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -265,7 +265,9 @@ #define __NR_pipe2 325 #define __NR_dup3 326 #define __NR_epoll_create1 327 -#define NR_syscalls 328 +#define __NR_preadv 328 +#define __NR_pwritev 329 +#define NR_syscalls 330 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 67a60016babb..fa9905ce7d0b 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -27,6 +27,8 @@ int main(void) DEFINE(__TI_flags, offsetof(struct thread_info, flags)); DEFINE(__TI_cpu, offsetof(struct thread_info, cpu)); DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count)); + DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer)); + DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer)); BLANK(); DEFINE(__PT_ARGS, offsetof(struct pt_regs, args)); DEFINE(__PT_PSW, offsetof(struct pt_regs, psw)); diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 87cf5a79a351..fb38af6316bb 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1805,3 +1805,21 @@ compat_sys_keyctl_wrapper: llgfr %r5,%r5 # u32 llgfr %r6,%r6 # u32 jg compat_sys_keyctl # branch to system call + + .globl compat_sys_preadv_wrapper +compat_sys_preadv_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_preadv # branch to system call + + .globl compat_sys_pwritev_wrapper +compat_sys_pwritev_wrapper: + llgfr %r2,%r2 # unsigned long + llgtr %r3,%r3 # compat_iovec * + llgfr %r4,%r4 # unsigned long + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_pwritev # branch to system call diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 4d221c81c849..cf09948faad6 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -34,8 +34,25 @@ char kernel_nss_name[NSS_NAME_SIZE + 1]; +static unsigned long machine_flags; + static void __init setup_boot_command_line(void); +/* + * Get the TOD clock running. + */ +static void __init reset_tod_clock(void) +{ + u64 time; + + if (store_clock(&time) == 0) + return; + /* TOD clock not running. Set the clock to Unix Epoch. */ + if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) + disabled_wait(0); + + sched_clock_base_cc = TOD_UNIX_EPOCH; +} #ifdef CONFIG_SHARED_KERNEL int __init savesys_ipl_nss(char *cmd, const int cmdlen); @@ -370,6 +387,7 @@ static void __init setup_boot_command_line(void) */ void __init startup_init(void) { + reset_tod_clock(); ipl_save_parameters(); rescue_initrd(); clear_bss_section(); @@ -391,5 +409,6 @@ void __init startup_init(void) setup_hpage(); sclp_facilities_detect(); detect_memory_layout(memory_chunk); + S390_lowcore.machine_flags = machine_flags; lockdep_on(); } diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1268aa2991bf..f3e275934213 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -837,16 +837,29 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) l %r15,__LC_SAVE_AREA+60 # load ksp lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs lam %a0,%a15,__LC_AREGS_SAVE_AREA lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone + l %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on basr %r14,0 l %r14,restart_addr-.(%r14) br %r14 # branch to start_secondary restart_addr: .long start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index c6fbde13971a..84a105838e03 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -831,14 +831,27 @@ mcck_return: __CPUINIT .globl restart_int_handler restart_int_handler: + basr %r1,0 +restart_base: + spt restart_vtime-restart_base(%r1) + stck __LC_LAST_UPDATE_CLOCK + mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1) + mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1) lg %r15,__LC_SAVE_AREA+120 # load ksp lghi %r10,__LC_CREGS_SAVE_AREA lctlg %c0,%c15,0(%r10) # get new ctl regs lghi %r10,__LC_AREGS_SAVE_AREA lam %a0,%a15,0(%r10) lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone + lg %r1,__LC_THREAD_INFO + mvc __LC_USER_TIMER(8),__TI_user_timer(%r1) + mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1) + xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on jg start_secondary + .align 8 +restart_vtime: + .long 0x7fffffff,0xffffffff .previous #else /* diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 1046c2c9f8d1..bba14494ee00 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -471,7 +471,12 @@ startup:basr %r13,0 # get base .LPG0: xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 - + l %r1,5f-.LPG0(%r13) + stck 0(%r1) + spt 6f-.LPG0(%r13) + mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1) + mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) + mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13) #ifndef CONFIG_MARCH_G5 # check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10} stidp __LC_CPUID # store cpuid @@ -496,9 +501,13 @@ startup:basr %r13,0 # get base brct %r0,0b #endif - l %r13,0f-.LPG0(%r13) + l %r13,4f-.LPG0(%r13) b 0(%r13) -0: .long startup_continue + .align 4 +4: .long startup_continue +5: .long sched_clock_base_cc + .align 8 +6: .long 0x7fffffff,0xffffffff # # params at 10400 (setup.h) diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index 4bfdc421d7e9..28cf196ba775 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/errno.h> +#include <linux/hardirq.h> #include <linux/time.h> #include <linux/module.h> #include <asm/lowcore.h> @@ -253,7 +254,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) struct mci *mci; int umode; - lockdep_off(); + nmi_enter(); s390_idle_check(); mci = (struct mci *) &S390_lowcore.mcck_interruption_code; @@ -363,7 +364,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) mcck->warning = 1; set_thread_flag(TIF_MCCK_PENDING); } - lockdep_on(); + nmi_exit(); } static int __init machine_check_init(void) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 06201b93cbbf..7402b6a39ead 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -82,9 +82,6 @@ EXPORT_SYMBOL(console_devno); unsigned int console_irq = -1; EXPORT_SYMBOL(console_irq); -unsigned long machine_flags; -EXPORT_SYMBOL(machine_flags); - unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; @@ -426,6 +423,7 @@ setup_lowcore(void) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE; lc->current_task = (unsigned long) init_thread_union.thread_info.task; lc->thread_info = (unsigned long) &init_thread_union; + lc->machine_flags = S390_lowcore.machine_flags; #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) { lc->extended_save_area_addr = (__u32) @@ -436,6 +434,14 @@ setup_lowcore(void) #else lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; #endif + lc->sync_enter_timer = S390_lowcore.sync_enter_timer; + lc->async_enter_timer = S390_lowcore.async_enter_timer; + lc->exit_timer = S390_lowcore.exit_timer; + lc->user_timer = S390_lowcore.user_timer; + lc->system_timer = S390_lowcore.system_timer; + lc->steal_timer = S390_lowcore.steal_timer; + lc->last_update_timer = S390_lowcore.last_update_timer; + lc->last_update_clock = S390_lowcore.last_update_clock; set_prefix((u32)(unsigned long) lc); lowcore_ptr[0] = lc; } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 006ed5016eb4..a985a3ba4401 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -571,6 +571,7 @@ int __cpuinit __cpu_up(unsigned int cpu) cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_nr = cpu; cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce; + cpu_lowcore->machine_flags = S390_lowcore.machine_flags; eieio(); while (signal_processor(cpu, sigp_restart) == sigp_busy) @@ -590,7 +591,8 @@ static int __init setup_possible_cpus(char *s) int pcpus, cpu; pcpus = simple_strtoul(s, NULL, 0); - for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++) + init_cpu_possible(cpumask_of(0)); + for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++) set_cpu_possible(cpu, true); return 0; } diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index fe5b25a988ab..2c7739fe70b1 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -336,3 +336,5 @@ SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) +SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper) +SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index f72d41068dc2..6ded50dfa75a 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -52,9 +52,6 @@ #define USECS_PER_JIFFY ((unsigned long) 1000000/HZ) #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12) -/* The value of the TOD clock for 1.1.1970. */ -#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL - /* * Create a small time difference between the timer interrupts * on the different cpus to avoid lock contention. @@ -63,9 +60,10 @@ #define TICK_SIZE tick +u64 sched_clock_base_cc = -1; /* Force to data section. */ + static ext_int_info_t ext_int_info_cc; static ext_int_info_t ext_int_etr_cc; -static u64 sched_clock_base_cc; static DEFINE_PER_CPU(struct clock_event_device, comparators); @@ -195,22 +193,12 @@ static void timing_alert_interrupt(__u16 code) static void etr_reset(void); static void stp_reset(void); -/* - * Get the TOD clock running. - */ -static u64 __init reset_tod_clock(void) +unsigned long read_persistent_clock(void) { - u64 time; - - etr_reset(); - stp_reset(); - if (store_clock(&time) == 0) - return time; - /* TOD clock not running. Set the clock to Unix Epoch. */ - if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0) - panic("TOD clock not operational."); + struct timespec ts; - return TOD_UNIX_EPOCH; + tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts); + return ts.tv_sec; } static cycle_t read_tod_clock(void) @@ -265,12 +253,13 @@ void update_vsyscall_tz(void) */ void __init time_init(void) { - sched_clock_base_cc = reset_tod_clock(); + struct timespec ts; + unsigned long flags; + cycle_t now; - /* set xtime */ - tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + /* Reset time synchronization interfaces. */ + etr_reset(); + stp_reset(); /* request the clock comparator external interrupt */ if (register_early_external_interrupt(0x1004, @@ -278,17 +267,38 @@ void __init time_init(void) &ext_int_info_cc) != 0) panic("Couldn't request external interrupt 0x1004"); - if (clocksource_register(&clocksource_tod) != 0) - panic("Could not register TOD clock source"); - /* request the timing alert external interrupt */ if (register_early_external_interrupt(0x1406, timing_alert_interrupt, &ext_int_etr_cc) != 0) panic("Couldn't request external interrupt 0x1406"); + if (clocksource_register(&clocksource_tod) != 0) + panic("Could not register TOD clock source"); + + /* + * The TOD clock is an accurate clock. The xtime should be + * initialized in a way that the difference between TOD and + * xtime is reasonably small. Too bad that timekeeping_init + * sets xtime.tv_nsec to zero. In addition the clock source + * change from the jiffies clock source to the TOD clock + * source add another error of up to 1/HZ second. The same + * function sets wall_to_monotonic to a value that is too + * small for /proc/uptime to be accurate. + * Reset xtime and wall_to_monotonic to sane values. + */ + write_seqlock_irqsave(&xtime_lock, flags); + now = get_clock(); + tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime); + clocksource_tod.cycle_last = now; + clocksource_tod.raw_time = xtime; + tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts); + set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec); + write_sequnlock_irqrestore(&xtime_lock, flags); + /* Enable TOD clock interrupts on the boot cpu. */ init_cpu_timer(); + /* Enable cpu timer interrupts on the boot cpu. */ vtime_init(); } @@ -1423,6 +1433,7 @@ static void *stp_page; static void stp_work_fn(struct work_struct *work); static DEFINE_MUTEX(stp_work_mutex); static DECLARE_WORK(stp_work, stp_work_fn); +static struct timer_list stp_timer; static int __init early_parse_stp(char *p) { @@ -1454,10 +1465,16 @@ static void __init stp_reset(void) } } +static void stp_timeout(unsigned long dummy) +{ + queue_work(time_sync_wq, &stp_work); +} + static int __init stp_init(void) { if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags)) return 0; + setup_timer(&stp_timer, stp_timeout, 0UL); time_init_wq(); if (!stp_online) return 0; @@ -1565,6 +1582,7 @@ static void stp_work_fn(struct work_struct *work) if (!stp_online) { chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000); + del_timer_sync(&stp_timer); goto out_unlock; } @@ -1586,6 +1604,13 @@ static void stp_work_fn(struct work_struct *work) stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map); put_online_cpus(); + if (!check_sync_clock()) + /* + * There is a usable clock but the synchonization failed. + * Retry after a second. + */ + mod_timer(&stp_timer, jiffies + HZ); + out_unlock: mutex_unlock(&stp_work_mutex); } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index ecf0304e61c1..38ea92ff04f9 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -134,6 +134,8 @@ void vtime_start_cpu(void) /* Account time spent with enabled wait psw loaded as idle time. */ idle_time = S390_lowcore.int_clock - idle->idle_enter; account_idle_time(idle_time); + S390_lowcore.steal_timer += + idle->idle_enter - S390_lowcore.last_update_clock; S390_lowcore.last_update_clock = S390_lowcore.int_clock; /* Account system time spent going idle. */ @@ -425,17 +427,7 @@ void add_virt_timer_periodic(void *new) } EXPORT_SYMBOL(add_virt_timer_periodic); -/* - * If we change a pending timer the function must be called on the CPU - * where the timer is running on, e.g. by smp_call_function_single() - * - * The original mod_timer adds the timer if it is not pending. For - * compatibility we do the same. The timer will be added on the current - * CPU as a oneshot timer. - * - * returns whether it has modified a pending timer (1) or not (0) - */ -int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic) { struct vtimer_queue *vq; unsigned long flags; @@ -444,39 +436,35 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) BUG_ON(!timer->function); BUG_ON(!expires || expires > VTIMER_MAX_SLICE); - /* - * This is a common optimization triggered by the - * networking code - if the timer is re-modified - * to be the same thing then just return: - */ if (timer->expires == expires && vtimer_pending(timer)) return 1; cpu = get_cpu(); vq = &per_cpu(virt_cpu_timer, cpu); - /* check if we run on the right CPU */ - BUG_ON(timer->cpu != cpu); - /* disable interrupts before test if timer is pending */ spin_lock_irqsave(&vq->lock, flags); /* if timer isn't pending add it on the current CPU */ if (!vtimer_pending(timer)) { spin_unlock_irqrestore(&vq->lock, flags); - /* we do not activate an interval timer with mod_virt_timer */ - timer->interval = 0; + + if (periodic) + timer->interval = expires; + else + timer->interval = 0; timer->expires = expires; timer->cpu = cpu; internal_add_vtimer(timer); return 0; } + /* check if we run on the right CPU */ + BUG_ON(timer->cpu != cpu); + list_del_init(&timer->entry); timer->expires = expires; - - /* also change the interval if we have an interval timer */ - if (timer->interval) + if (periodic) timer->interval = expires; /* the timer can't expire anymore so we can release the lock */ @@ -484,9 +472,32 @@ int mod_virt_timer(struct vtimer_list *timer, __u64 expires) internal_add_vtimer(timer); return 1; } + +/* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 0); +} EXPORT_SYMBOL(mod_virt_timer); /* + * If we change a pending timer the function must be called on the CPU + * where the timer is running on. + * + * returns whether it has modified a pending timer (1) or not (0) + */ +int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires) +{ + return __mod_vtimer(timer, expires, 1); +} +EXPORT_SYMBOL(mod_virt_timer_periodic); + +/* * delete a virtual timer * * returns whether the deleted timer was pending (1) or not (0) @@ -516,16 +527,8 @@ EXPORT_SYMBOL(del_virt_timer); */ void init_cpu_vtimer(void) { - struct thread_info *ti = current_thread_info(); struct vtimer_queue *vq; - S390_lowcore.user_timer = ti->user_timer; - S390_lowcore.system_timer = ti->system_timer; - - /* kick the virtual timer */ - asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock)); - asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer)); - /* initialize per cpu vtimer structure */ vq = &__get_cpu_var(virt_cpu_timer); INIT_LIST_HEAD(&vq->list); diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 58dfc02c7af1..e3a7e36639ef 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -63,6 +63,15 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { + /* + * The shift for mmap2 is constant, regardless of PAGE_SIZE + * setting. + */ + if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) + return -EINVAL; + + pgoff >>= PAGE_SHIFT - 12; + return do_mmap2(addr, len, prot, flags, fd, pgoff); } diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h index ce465975a6a5..bb91b1248cd1 100644 --- a/arch/sparc/include/asm/atomic_32.h +++ b/arch/sparc/include/asm/atomic_32.h @@ -15,6 +15,8 @@ #ifdef __KERNEL__ +#include <asm/system.h> + #define ATOMIC_INIT(i) { (i) } extern int __atomic_add_return(int, atomic_t *); diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c index 6ce5d2598a09..adf5f273868a 100644 --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1183,8 +1183,7 @@ out_free_txq: free_queue(lp->tx_num_entries, lp->tx_base); out_free_mssbuf: - if (mssbuf) - kfree(mssbuf); + kfree(mssbuf); out_free_iommu: ldc_iommu_release(lp); @@ -1217,8 +1216,7 @@ void ldc_free(struct ldc_channel *lp) hlist_del(&lp->list); - if (lp->mssbuf) - kfree(lp->mssbuf); + kfree(lp->mssbuf); ldc_iommu_release(lp); diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 708e12a26b05..f7642e5a94db 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -118,9 +118,9 @@ void __cpuinit smp_callin(void) while (!cpu_isset(cpuid, smp_commenced_mask)) rmb(); - ipi_call_lock(); + ipi_call_lock_irq(); cpu_set(cpuid, cpu_online_map); - ipi_call_unlock(); + ipi_call_unlock_irq(); /* idle thread is expected to have preempt disabled */ preempt_disable(); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc25b9f5e4cd..c9086e6307a5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -353,6 +353,7 @@ config X86_UV bool "SGI Ultraviolet" depends on X86_64 depends on X86_EXTENDED_PLATFORM + depends on NUMA select X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 924e156a85ab..8130334329c0 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -506,6 +506,7 @@ config X86_PTRACE_BTS bool "Branch Trace Store" default y depends on X86_DEBUGCTLMSR + depends on BROKEN ---help--- This adds a ptrace interface to the hardware's branch trace store. diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h index 2cd07b9422f4..7af14e512f97 100644 --- a/arch/x86/include/asm/pat.h +++ b/arch/x86/include/asm/pat.h @@ -18,9 +18,5 @@ extern int free_memtype(u64 start, u64 end); extern int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flag); -extern void map_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); -extern void unmap_devmem(unsigned long pfn, unsigned long size, - struct pgprot vma_prot); #endif /* _ASM_X86_PAT_H */ diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index db68ac8a5ac2..2cae46c7c8a2 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -17,6 +17,11 @@ /* ========================================================================= */ /* UVH_BAU_DATA_CONFIG */ /* ========================================================================= */ +#define UVH_LB_BAU_MISC_CONTROL 0x320170UL +#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16 +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL +/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */ #define UVH_BAU_DATA_CONFIG 0x61680UL #define UVH_BAU_DATA_CONFIG_32 0x0438 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318436e8..de1a50af807b 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -549,7 +549,8 @@ void __init uv_system_init(void) unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; int max_pnode = 0; - unsigned long mmr_base, present; + unsigned long mmr_base, present, paddr; + unsigned short pnode_mask; map_low_mmrs(); @@ -592,6 +593,7 @@ void __init uv_system_init(void) } } + pnode_mask = (1 << n_val) - 1; node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_upper = (((unsigned long)node_id.s.node_id) & ~((1 << n_val) - 1)) << m_val; @@ -615,7 +617,7 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; - uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; @@ -631,6 +633,16 @@ void __init uv_system_init(void) lcpu, blade); } + /* Add blade/pnode info for nodes without cpus */ + for_each_online_node(nid) { + if (uv_node_to_blade[nid] >= 0) + continue; + paddr = node_start_pfn(nid) << PAGE_SHIFT; + pnode = (paddr >> m_val) & pnode_mask; + blade = boot_pnode_to_blade(pnode); + uv_node_to_blade[nid] = blade; + } + map_gru_high(max_pnode); map_mmr_high(max_pnode); map_config_high(max_pnode); diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c index f63882728d91..63a88e1f987d 100644 --- a/arch/x86/kernel/bios_uv.c +++ b/arch/x86/kernel/bios_uv.c @@ -182,7 +182,8 @@ void uv_bios_init(void) memcpy(&uv_systab, tab, sizeof(struct uv_systab)); iounmap(tab); - printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision); + printk(KERN_INFO "EFI UV System Table Revision %d\n", + uv_systab.revision); } #else /* !CONFIG_EFI */ diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 2e0eb4140951..98c470c069d1 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -380,8 +380,6 @@ static int mc_sysdev_add(struct sys_device *sys_dev) return err; err = microcode_init_cpu(cpu); - if (err) - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); return err; } diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 34f12e9996ed..221a3853e268 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -50,7 +50,7 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags); } -struct dma_map_ops swiotlb_dma_ops = { +static struct dma_map_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = x86_swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index deb5ebb32c3b..ed0c33761e6d 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -25,6 +25,8 @@ static int uv_bau_retry_limit __read_mostly; /* position of pnode (which is nasid>>1): */ static int uv_nshift __read_mostly; +/* base pnode in this partition */ +static int uv_partition_base_pnode __read_mostly; static unsigned long uv_mmask __read_mostly; @@ -32,6 +34,34 @@ static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); /* + * Determine the first node on a blade. + */ +static int __init blade_to_first_node(int blade) +{ + int node, b; + + for_each_online_node(node) { + b = uv_node_to_blade_id(node); + if (blade == b) + return node; + } + return -1; /* shouldn't happen */ +} + +/* + * Determine the apicid of the first cpu on a blade. + */ +static int __init blade_to_first_apicid(int blade) +{ + int cpu; + + for_each_present_cpu(cpu) + if (blade == uv_cpu_to_blade_id(cpu)) + return per_cpu(x86_cpu_to_apicid, cpu); + return -1; +} + +/* * Free a software acknowledge hardware resource by clearing its Pending * bit. This will return a reply to the sender. * If the message has timed out, a reply has already been sent by the @@ -67,7 +97,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; cpu = uv_blade_processor_id(); msg->number_of_cpus = - uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); this_cpu_mask = 1UL << cpu; if (msp->seen_by.bits & this_cpu_mask) return; @@ -215,14 +245,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc, * Returns @flush_mask if some remote flushing remains to be done. The * mask will have some bits still set. */ -const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, +const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode, struct bau_desc *bau_desc, struct cpumask *flush_mask) { int completion_status = 0; int right_shift; int tries = 0; - int blade; + int pnode; int bit; unsigned long mmr_offset; unsigned long index; @@ -265,8 +295,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, * use the IPI method of shootdown on them. */ for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - if (blade == this_blade) + pnode = uv_cpu_to_pnode(bit); + if (pnode == this_pnode) continue; cpumask_clear_cpu(bit, flush_mask); } @@ -309,16 +339,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask); int i; int bit; - int blade; + int pnode; int uv_cpu; - int this_blade; + int this_pnode; int locals = 0; struct bau_desc *bau_desc; cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); uv_cpu = uv_blade_processor_id(); - this_blade = uv_numa_blade_id(); + this_pnode = uv_hub_info->pnode; bau_desc = __get_cpu_var(bau_control).descriptor_base; bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; @@ -326,13 +356,14 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, i = 0; for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); - if (blade == this_blade) { + pnode = uv_cpu_to_pnode(bit); + BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1)); + if (pnode == this_pnode) { locals++; continue; } - bau_node_set(blade, &bau_desc->distribution); + bau_node_set(pnode - uv_partition_base_pnode, + &bau_desc->distribution); i++; } if (i == 0) { @@ -350,7 +381,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask); + return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask); } /* @@ -418,24 +449,58 @@ void uv_bau_message_interrupt(struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * uv_enable_timeouts + * + * Each target blade (i.e. blades that have cpu's) needs to have + * shootdown message timeouts enabled. The timeout does not cause + * an interrupt, but causes an error message to be returned to + * the sender. + */ static void uv_enable_timeouts(void) { - int i; int blade; - int last_blade; + int nblades; int pnode; - int cur_cpu = 0; - unsigned long apicid; + unsigned long mmr_image; - last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); - if (blade == last_blade) + nblades = uv_num_possible_blades(); + + for (blade = 0; blade < nblades; blade++) { + if (!uv_blade_nr_possible_cpus(blade)) continue; - last_blade = blade; - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); - cur_cpu += uv_blade_nr_possible_cpus(i); + mmr_image = + uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); + /* + * Set the timeout period and then lock it in, in three + * steps; captures and locks in the period. + * + * To program the period, the SOFT_ACK_MODE must be off. + */ + mmr_image &= ~((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Set the 4-bit period. + */ + mmr_image &= ~((unsigned long)0xf << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Subsequent reversals of the timebase bit (3) cause an + * immediate timeout of one or all INTD resources as + * indicated in bits 2:0 (7 causes all of them to timeout). + */ + mmr_image |= ((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } } @@ -482,8 +547,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) stat->requestee, stat->onetlb, stat->alltlb, stat->s_retry, stat->d_retry, stat->ptc_i); seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", - uv_read_global_mmr64(uv_blade_to_pnode - (uv_cpu_to_blade_id(cpu)), + uv_read_global_mmr64(uv_cpu_to_pnode(cpu), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), stat->sflush, stat->dflush, stat->retriesok, stat->nomsg, @@ -617,16 +681,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) * finish the initialization of the per-blade control structures */ static void __init -uv_table_bases_finish(int blade, int node, int cur_cpu, +uv_table_bases_finish(int blade, struct bau_control *bau_tablesp, struct bau_desc *adp) { struct bau_control *bcp; - int i; + int cpu; - for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { - bcp = (struct bau_control *)&per_cpu(bau_control, i); + for_each_present_cpu(cpu) { + if (blade != uv_cpu_to_blade_id(cpu)) + continue; + bcp = (struct bau_control *)&per_cpu(bau_control, cpu); bcp->bau_msg_head = bau_tablesp->va_queue_first; bcp->va_queue_first = bau_tablesp->va_queue_first; bcp->va_queue_last = bau_tablesp->va_queue_last; @@ -649,11 +715,10 @@ uv_activation_descriptor_init(int node, int pnode) struct bau_desc *adp; struct bau_desc *ad2; - adp = (struct bau_desc *) - kmalloc_node(16384, GFP_KERNEL, node); + adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); - pa = __pa((unsigned long)adp); + pa = uv_gpa(adp); /* need the real nasid*/ n = pa >> uv_nshift; m = pa & uv_mmask; @@ -667,8 +732,12 @@ uv_activation_descriptor_init(int node, int pnode) for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = - uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + /* + * base_dest_nodeid is the first node in the partition, so + * the bit map will indicate partition-relative node numbers. + * note that base_dest_nodeid is actually a nasid. + */ + ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* @@ -686,6 +755,8 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) { struct bau_payload_queue_entry *pqp; + unsigned long pa; + int pn; char *cp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( @@ -696,10 +767,14 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; + /* + * need the pnode of where the memory was really allocated + */ + pa = uv_gpa(pqp); + pn = pa >> uv_nshift; uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pnode << - UV_PAYLOADQ_PNODE_SHIFT) | + ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); @@ -715,8 +790,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) /* * Initialization of each UV blade's structures */ -static int __init uv_init_blade(int blade, int node, int cur_cpu) +static int __init uv_init_blade(int blade) { + int node; int pnode; unsigned long pa; unsigned long apicid; @@ -724,16 +800,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) struct bau_payload_queue_entry *pqp; struct bau_control *bau_tablesp; + node = blade_to_first_node(blade); bau_tablesp = uv_table_bases_init(blade, node); pnode = uv_blade_to_pnode(blade); adp = uv_activation_descriptor_init(node, pnode); pqp = uv_payload_queue_init(node, pnode, bau_tablesp); - uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + uv_table_bases_finish(blade, bau_tablesp, adp); /* * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + apicid = blade_to_first_apicid(blade); pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); if ((pa & 0xff) != UV_BAU_MESSAGE) { uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -748,9 +825,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) static int __init uv_bau_init(void) { int blade; - int node; int nblades; - int last_blade; int cur_cpu; if (!is_uv_system()) @@ -763,29 +838,21 @@ static int __init uv_bau_init(void) uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; uv_mmask = (1UL << uv_hub_info->n_val) - 1; - nblades = 0; - last_blade = -1; - cur_cpu = 0; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - nblades++; - } + nblades = uv_num_possible_blades(); + uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); - last_blade = -1; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - uv_init_blade(blade, node, cur_cpu); - cur_cpu += uv_blade_nr_possible_cpus(blade); - } + uv_partition_base_pnode = 0x7fffffff; + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade) && + (uv_blade_to_pnode(blade) < uv_partition_base_pnode)) + uv_partition_base_pnode = uv_blade_to_pnode(blade); + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade)) + uv_init_blade(blade); + alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c index 67f9b9dbf800..36afb98675a4 100644 --- a/arch/x86/kernel/uv_sysfs.c +++ b/arch/x86/kernel/uv_sysfs.c @@ -21,6 +21,7 @@ #include <linux/sysdev.h> #include <asm/uv/bios.h> +#include <asm/uv/uv.h> struct kobject *sgi_uv_kobj; @@ -47,6 +48,9 @@ static int __init sgi_uv_sysfs_init(void) { unsigned long ret; + if (!is_uv_system()) + return -ENODEV; + if (!sgi_uv_kobj) sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj); if (!sgi_uv_kobj) { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 09daebfdb11c..8a450930834f 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -280,15 +280,16 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return NULL; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { + + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { free_memtype(phys_addr, phys_addr + size); free_vm_area(area); return NULL; } - if (ioremap_change_attr(vaddr, size, prot_val) < 0) { + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { free_memtype(phys_addr, phys_addr + size); - vunmap(area->addr); + free_vm_area(area); return NULL; } @@ -374,7 +375,8 @@ static void __iomem *ioremap_default(resource_size_t phys_addr, * - UC_MINUS for non-WB-able memory with no other conflicting mappings * - Inherit from confliting mappings otherwise */ - err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags); + err = reserve_memtype(phys_addr, phys_addr + size, + _PAGE_CACHE_WB, &flags); if (err < 0) return NULL; diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index d71e1b636ce6..797f9f107cb6 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -945,71 +945,94 @@ int _set_memory_uc(unsigned long addr, int numpages) int set_memory_uc(unsigned long addr, int numpages) { + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_UC_MINUS, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_err; + + ret = _set_memory_uc(addr, numpages); + if (ret) + goto out_free; - return _set_memory_uc(addr, numpages); + return 0; + +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_uc); int set_memory_array_uc(unsigned long *addr, int addrinarray) { - unsigned long start; - unsigned long end; - int i; + int i, j; + int ret; + /* * for now UC MINUS. see comments in ioremap_nocache() */ for (i = 0; i < addrinarray; i++) { - start = __pa(addr[i]); - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL)) - goto out; + ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE, + _PAGE_CACHE_UC_MINUS, NULL); + if (ret) + goto out_free; } - return change_page_attr_set(addr, addrinarray, + ret = change_page_attr_set(addr, addrinarray, __pgprot(_PAGE_CACHE_UC_MINUS), 1); -out: - for (i = 0; i < addrinarray; i++) { - unsigned long tmp = __pa(addr[i]); - - if (tmp == start) - break; - for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(tmp, end); - } - return -EINVAL; + if (ret) + goto out_free; + + return 0; + +out_free: + for (j = 0; j < i; j++) + free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE); + + return ret; } EXPORT_SYMBOL(set_memory_array_uc); int _set_memory_wc(unsigned long addr, int numpages) { - return change_page_attr_set(&addr, numpages, + int ret; + ret = change_page_attr_set(&addr, numpages, + __pgprot(_PAGE_CACHE_UC_MINUS), 0); + + if (!ret) { + ret = change_page_attr_set(&addr, numpages, __pgprot(_PAGE_CACHE_WC), 0); + } + return ret; } int set_memory_wc(unsigned long addr, int numpages) { + int ret; + if (!pat_enabled) return set_memory_uc(addr, numpages); - if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, - _PAGE_CACHE_WC, NULL)) - return -EINVAL; + ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE, + _PAGE_CACHE_WC, NULL); + if (ret) + goto out_err; + + ret = _set_memory_wc(addr, numpages); + if (ret) + goto out_free; + + return 0; - return _set_memory_wc(addr, numpages); +out_free: + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); +out_err: + return ret; } EXPORT_SYMBOL(set_memory_wc); @@ -1021,29 +1044,31 @@ int _set_memory_wb(unsigned long addr, int numpages) int set_memory_wb(unsigned long addr, int numpages) { - free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); + int ret; + + ret = _set_memory_wb(addr, numpages); + if (ret) + return ret; - return _set_memory_wb(addr, numpages); + free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE); + return 0; } EXPORT_SYMBOL(set_memory_wb); int set_memory_array_wb(unsigned long *addr, int addrinarray) { int i; + int ret; - for (i = 0; i < addrinarray; i++) { - unsigned long start = __pa(addr[i]); - unsigned long end; - - for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) { - if (end != __pa(addr[i + 1])) - break; - i++; - } - free_memtype(start, end); - } - return change_page_attr_clear(addr, addrinarray, + ret = change_page_attr_clear(addr, addrinarray, __pgprot(_PAGE_CACHE_MASK), 1); + if (ret) + return ret; + + for (i = 0; i < addrinarray; i++) + free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE); + + return 0; } EXPORT_SYMBOL(set_memory_array_wb); @@ -1136,6 +1161,8 @@ int set_pages_array_wb(struct page **pages, int addrinarray) retval = cpa_clear_pages_array(pages, addrinarray, __pgprot(_PAGE_CACHE_MASK)); + if (retval) + return retval; for (i = 0; i < addrinarray; i++) { start = (unsigned long)page_address(pages[i]); @@ -1143,7 +1170,7 @@ int set_pages_array_wb(struct page **pages, int addrinarray) free_memtype(start, end); } - return retval; + return 0; } EXPORT_SYMBOL(set_pages_array_wb); diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index c009a241d562..e6718bb28065 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -182,10 +182,10 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) u8 mtrr_type; mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == MTRR_TYPE_UNCACHABLE) - return _PAGE_CACHE_UC; - if (mtrr_type == MTRR_TYPE_WRCOMB) - return _PAGE_CACHE_WC; + if (mtrr_type != MTRR_TYPE_WRBACK) + return _PAGE_CACHE_UC_MINUS; + + return _PAGE_CACHE_WB; } return req_type; @@ -352,23 +352,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, return 0; } - if (req_type == -1) { - /* - * Call mtrr_lookup to get the type hint. This is an - * optimization for /dev/mem mmap'ers into WB memory (BIOS - * tools and ACPI tools). Use WB request for WB memory and use - * UC_MINUS otherwise. - */ - u8 mtrr_type = mtrr_type_lookup(start, end); - - if (mtrr_type == MTRR_TYPE_WRBACK) - actual_type = _PAGE_CACHE_WB; - else - actual_type = _PAGE_CACHE_UC_MINUS; - } else { - actual_type = pat_x_mtrr_type(start, end, - req_type & _PAGE_CACHE_MASK); - } + /* + * Call mtrr_lookup to get the type hint. This is an + * optimization for /dev/mem mmap'ers into WB memory (BIOS + * tools and ACPI tools). Use WB request for WB memory and use + * UC_MINUS otherwise. + */ + actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK); if (new_type) *new_type = actual_type; @@ -546,9 +536,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size) int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, unsigned long size, pgprot_t *vma_prot) { - u64 offset = ((u64) pfn) << PAGE_SHIFT; - unsigned long flags = -1; - int retval; + unsigned long flags = _PAGE_CACHE_WB; if (!range_is_allowed(pfn, size)) return 0; @@ -576,64 +564,11 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, } #endif - /* - * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot. - * - * Without O_SYNC, we want to get - * - WB for WB-able memory and no other conflicting mappings - * - UC_MINUS for non-WB-able memory with no other conflicting mappings - * - Inherit from confliting mappings otherwise - */ - if (flags != -1) { - retval = reserve_memtype(offset, offset + size, flags, NULL); - } else { - retval = reserve_memtype(offset, offset + size, -1, &flags); - } - - if (retval < 0) - return 0; - - if (((pfn < max_low_pfn_mapped) || - (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) && - ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { - free_memtype(offset, offset + size); - printk(KERN_INFO - "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", - current->comm, current->pid, - cattr_name(flags), - offset, (unsigned long long)(offset + size)); - return 0; - } - *vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) | flags); return 1; } -void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK); - u64 addr = (u64)pfn << PAGE_SHIFT; - unsigned long flags; - - reserve_memtype(addr, addr + size, want_flags, &flags); - if (flags != want_flags) { - printk(KERN_INFO - "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n", - current->comm, current->pid, - cattr_name(want_flags), - addr, (unsigned long long)(addr + size), - cattr_name(flags)); - } -} - -void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) -{ - u64 addr = (u64)pfn << PAGE_SHIFT; - - free_memtype(addr, addr + size); -} - /* * Change the memory type for the physial address range in kernel identity * mapping space if that range is a part of identity map. @@ -671,8 +606,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, { int is_ram = 0; int ret; - unsigned long flags; unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK); + unsigned long flags = want_flags; is_ram = pat_pagerange_is_ram(paddr, paddr + size); @@ -734,29 +669,28 @@ static void free_pfn_range(u64 paddr, unsigned long size) * * If the vma has a linear pfn mapping for the entire range, we get the prot * from pte and reserve the entire vma range with single reserve_pfn_range call. - * Otherwise, we reserve the entire vma range, my ging through the PTEs page - * by page to get physical address and protection. */ int track_pfn_vma_copy(struct vm_area_struct *vma) { - int retval = 0; - unsigned long i, j; resource_size_t paddr; unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; pgprot_t pgprot; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* * reserve the whole chunk covered by vma. We need the * starting address and protection from pte. */ - if (follow_phys(vma, vma_start, 0, &prot, &paddr)) { + if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) { WARN_ON_ONCE(1); return -EINVAL; } @@ -764,28 +698,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma) return reserve_pfn_range(paddr, vma_size, &pgprot, 1); } - /* reserve entire vma page by page, using pfn and prot from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - pgprot = __pgprot(prot); - retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - if (follow_phys(vma, vma_start + j, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -795,50 +708,28 @@ cleanup_ret: * prot is passed in as a parameter for the new mapping. If the vma has a * linear pfn mapping for the entire range reserve the entire vma range with * single reserve_pfn_range call. - * Otherwise, we look t the pfn and size and reserve only the specified range - * page by page. - * - * Note that this function can be called with caller trying to map only a - * subrange/page inside the vma. */ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size) { - int retval = 0; - unsigned long i, j; - resource_size_t base_paddr; resource_size_t paddr; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return 0; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; return reserve_pfn_range(paddr, vma_size, prot, 0); } - /* reserve page by page using pfn and size */ - base_paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = base_paddr + i; - retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0); - if (retval) - goto cleanup_ret; - } return 0; - -cleanup_ret: - /* Reserve error: Cleanup partial reservation and return error */ - for (j = 0; j < i; j += PAGE_SIZE) { - paddr = base_paddr + j; - free_pfn_range(paddr, PAGE_SIZE); - } - - return retval; } /* @@ -849,39 +740,23 @@ cleanup_ret: void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn, unsigned long size) { - unsigned long i; resource_size_t paddr; - unsigned long prot; - unsigned long vma_start = vma->vm_start; - unsigned long vma_end = vma->vm_end; - unsigned long vma_size = vma_end - vma_start; + unsigned long vma_size = vma->vm_end - vma->vm_start; if (!pat_enabled) return; + /* + * For now, only handle remap_pfn_range() vmas where + * is_linear_pfn_mapping() == TRUE. Handling of + * vm_insert_pfn() is TBD. + */ if (is_linear_pfn_mapping(vma)) { /* free the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; free_pfn_range(paddr, vma_size); return; } - - if (size != 0 && size != vma_size) { - /* free page by page, using pfn and size */ - paddr = (resource_size_t)pfn << PAGE_SHIFT; - for (i = 0; i < size; i += PAGE_SIZE) { - paddr = paddr + i; - free_pfn_range(paddr, PAGE_SIZE); - } - } else { - /* free entire vma, page by page, using the pfn from pte */ - for (i = 0; i < vma_size; i += PAGE_SIZE) { - if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) - continue; - - free_pfn_range(paddr, PAGE_SIZE); - } - } } pgprot_t pgprot_writecombine(pgprot_t prot) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 065507c46644..17c5d48a75d2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1231,6 +1231,9 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * We follow the current spec and consider that 0x69/0x96 * identifies a port multiplier and 0x3c/0xc3 a SEMB device. + * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports + * SEMB signature. This is worked around in + * ata_dev_read_id(). */ if ((tf->lbam == 0) && (tf->lbah == 0)) { DPRINTK("found ATA device by sig\n"); @@ -1248,8 +1251,8 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { - printk(KERN_INFO "ata: SEMB device ignored\n"); - return ATA_DEV_SEMB_UNSUP; /* not yet */ + DPRINTK("found SEMB device by sig (could be ATA device)\n"); + return ATA_DEV_SEMB; } DPRINTK("unknown device\n"); @@ -1653,8 +1656,8 @@ unsigned long ata_id_xfermask(const u16 *id) /* * Process compact flash extended modes */ - int pio = id[163] & 0x7; - int dma = (id[163] >> 3) & 7; + int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; + int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; if (pio) pio_mask |= (1 << 5); @@ -2080,6 +2083,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, struct ata_taskfile tf; unsigned int err_mask = 0; const char *reason; + bool is_semb = class == ATA_DEV_SEMB; int may_fallback = 1, tried_spinup = 0; int rc; @@ -2090,6 +2094,8 @@ retry: ata_tf_init(dev, &tf); switch (class) { + case ATA_DEV_SEMB: + class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; break; @@ -2126,6 +2132,14 @@ retry: return -ENOENT; } + if (is_semb) { + ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on " + "device w/ SEMB sig, disabled\n"); + /* SEMB is not supported yet */ + *p_class = ATA_DEV_SEMB_UNSUP; + return 0; + } + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { /* Device or controller might have reported * the wrong device class. Give a shot at the @@ -2412,7 +2426,8 @@ int ata_dev_configure(struct ata_device *dev) /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { if (ata_id_is_cfa(id)) { - if (id[162] & 1) /* CPRM may make this media unusable */ + /* CPRM may make this media unusable */ + if (id[ATA_ID_CFA_KEY_MGMT] & 1) ata_dev_printk(dev, KERN_WARNING, "supports DRM functions and may " "not be fully accessable.\n"); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9747fa59e54..2733b0c90b75 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -647,23 +647,45 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) return rc; } +static int ata_ioc32(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + if (ap->pflags & ATA_PFLAG_PIO32) + return 1; + return 0; +} + int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, int cmd, void __user *arg) { int val = -EINVAL, rc = -EINVAL; + unsigned long flags; switch (cmd) { case ATA_IOC_GET_IO32: - val = 0; + spin_lock_irqsave(ap->lock, flags); + val = ata_ioc32(ap); + spin_unlock_irqrestore(ap->lock, flags); if (copy_to_user(arg, &val, 1)) return -EFAULT; return 0; case ATA_IOC_SET_IO32: val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; + rc = 0; + spin_lock_irqsave(ap->lock, flags); + if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { + if (val) + ap->pflags |= ATA_PFLAG_PIO32; + else + ap->pflags &= ~ATA_PFLAG_PIO32; + } else { + if (val != ata_ioc32(ap)) + rc = -EINVAL; + } + spin_unlock_irqrestore(ap->lock, flags); + return rc; case HDIO_GET_IDENTITY: return ata_get_identity(ap, scsidev, arg); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8332e97a9de3..bb18415d3d63 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -87,6 +87,7 @@ const struct ata_port_operations ata_bmdma32_port_ops = { .inherits = &ata_bmdma_port_ops, .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_sff_port_start32, }; EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); @@ -769,6 +770,9 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 2; int slop = buflen & 3; + + if (!(ap->pflags & ATA_PFLAG_PIO32)) + return ata_sff_data_xfer(dev, buf, buflen, rw); /* Transfer multiple of 4 bytes */ if (rw == READ) @@ -2402,6 +2406,29 @@ int ata_sff_port_start(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_sff_port_start); /** + * ata_sff_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table if the device + * is DMA capable SFF. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sff_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + if (ap->ioaddr.bmdma_addr) + return ata_port_start(ap); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_port_start32); + +/** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized * diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 81ab57003aba..122c786449a9 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * TODO * Look into engine reset on timeout errors. Should not be required. @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.11" +#define DRV_VERSION "0.6.12" struct hpt_clock { u8 xfer_speed; @@ -445,23 +445,6 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) } /** - * hpt370_bmdma_start - DMA engine begin - * @qc: ATA command - * - * The 370 and 370A want us to reset the DMA engine each time we - * use it. The 372 and later are fine. - */ - -static void hpt370_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); - udelay(10); - ata_bmdma_start(qc); -} - -/** * hpt370_bmdma_end - DMA engine stop * @qc: ATA command * @@ -598,7 +581,6 @@ static struct scsi_host_template hpt37x_sht = { static struct ata_port_operations hpt370_port_ops = { .inherits = &ata_bmdma_port_ops, - .bmdma_start = hpt370_bmdma_start, .bmdma_stop = hpt370_bmdma_stop, .mode_filter = hpt370_filter, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 3f830f0fe2cc..f72c6c5b820f 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -108,6 +108,7 @@ struct legacy_controller { struct ata_port_operations *ops; unsigned int pio_mask; unsigned int flags; + unsigned int pflags; int (*setup)(struct platform_device *, struct legacy_probe *probe, struct legacy_data *data); }; @@ -284,9 +285,11 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { int slop = buflen & 3; + struct ata_port *ap = dev->link->ap; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ - if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { - struct ata_port *ap = dev->link->ap; + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { unsigned long flags; local_irq_save(flags); @@ -736,7 +739,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else @@ -858,27 +862,30 @@ static struct ata_port_operations winbond_port_ops = { static struct legacy_controller controllers[] = { {"BIOS", &legacy_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"Snooping", &simple_port_ops, 0x1F, - 0 , NULL }, + 0, 0, NULL }, {"PDC20230", &pdc20230_port_ops, 0x7, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, {"HT6560A", &ht6560a_port_ops, 0x07, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"HT6560B", &ht6560b_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, - ATA_FLAG_NO_IORDY, qdi_port }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"W83759A", &winbond_port_ops, 0x1F, - 0 , winbond_port } + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, + winbond_port } }; /** @@ -1008,6 +1015,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ap->ops = ops; ap->pio_mask = pio_modes; ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; ap->ioaddr.cmd_addr = io_addr; ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; @@ -1032,6 +1040,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) return 0; } } + ata_host_detach(host); fail: platform_device_unregister(pdev); return ret; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 0fb6b1b1e634..dd53a66b19e3 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.3" +#define DRV_VERSION "0.1.5" /** @@ -86,6 +86,7 @@ static struct ata_port_operations ninja32_port_ops = { .sff_dev_select = ninja32_dev_select, .cable_detect = ata_cable_40wire, .set_piomode = ninja32_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32 }; static void ninja32_program(void __iomem *base) @@ -144,6 +145,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = base + 0x1E; ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); + ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; ninja32_program(base); /* FIXME: Should we disable them at remove ? */ diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index b08e6e0f82b6..45657cacec43 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -62,7 +62,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -136,6 +136,9 @@ static const struct via_isa_bridge { { NULL } }; +struct via_port { + u8 cached_device; +}; /* * Cable special cases @@ -346,14 +349,70 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) */ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { - struct ata_taskfile tmp_tf; + struct ata_ioports *ioaddr = &ap->ioaddr; + struct via_port *vp = ap->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + int newctl = 0; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + newctl = 1; + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + vp->cached_device = tf->device; + } else if (newctl) + iowrite8(vp->cached_device, ioaddr->device_addr); + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } - if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) { - tmp_tf = *tf; - tmp_tf.flags |= ATA_TFLAG_DEVICE; - tf = &tmp_tf; + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); } - ata_sff_tf_load(ap, tf); + + ata_wait_idle(ap); +} + +static int via_port_start(struct ata_port *ap) +{ + struct via_port *vp; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + int ret = ata_sff_port_start(ap); + if (ret < 0) + return ret; + + vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL); + if (vp == NULL) + return -ENOMEM; + ap->private_data = vp; + return 0; } static struct scsi_host_template via_sht = { @@ -367,6 +426,7 @@ static struct ata_port_operations via_port_ops = { .set_dmamode = via_set_dmamode, .prereset = via_pre_reset, .sff_tf_load = via_tf_load, + .port_start = via_port_start, }; static struct ata_port_operations via_port_ops_noirq = { diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 37ae5dc1070c..870dcfd82357 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1881,6 +1881,39 @@ static u8 mv_bmdma_status(struct ata_port *ap) return status; } +static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + /* + * Workaround for 88SX60x1 FEr SATA#24. + * + * Chip may corrupt WRITEs if multi_count >= 4kB. + * Note that READs are unaffected. + * + * It's not clear if this errata really means "4K bytes", + * or if it always happens for multi_count > 7 + * regardless of device sector_size. + * + * So, for safety, any write with multi_count > 7 + * gets converted here into a regular PIO write instead: + */ + if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) { + if (qc->dev->multi_count > 7) { + switch (tf->command) { + case ATA_CMD_WRITE_MULTI: + tf->command = ATA_CMD_PIO_WRITE; + break; + case ATA_CMD_WRITE_MULTI_FUA_EXT: + tf->flags &= ~ATA_TFLAG_FUA; /* ugh */ + /* fall through */ + case ATA_CMD_WRITE_MULTI_EXT: + tf->command = ATA_CMD_PIO_WRITE_EXT; + break; + } + } + } +} + /** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare @@ -1898,17 +1931,24 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; __le16 *cw; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; u16 flags = 0; unsigned in_index; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + switch (tf->protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + break; /* continue below */ + case ATA_PROT_PIO: + mv_rw_multi_errata_sata24(qc); + return; + default: return; + } /* Fill in command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; @@ -1924,7 +1964,6 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); cw = &pp->crqb[in_index].ata_cmd[0]; - tf = &qc->tf; /* Sadly, the CRQB cannot accomodate all registers--there are * only 11 bytes...so we must pick and choose required @@ -1990,16 +2029,16 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; struct mv_crqb_iie *crqb; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; unsigned in_index; u32 flags = 0; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + if ((tf->protocol != ATA_PROT_DMA) && + (tf->protocol != ATA_PROT_NCQ)) return; /* Fill in Gen IIE command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); @@ -2015,7 +2054,6 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); crqb->flags = cpu_to_le32(flags); - tf = &qc->tf; crqb->ata_cmd[0] = cpu_to_le32( (tf->command << 16) | (tf->feature << 24) diff --git a/drivers/base/base.h b/drivers/base/base.h index ddc97496db4a..b528145a078f 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -115,7 +115,7 @@ extern int driver_probe_device(struct device_driver *drv, struct device *dev); static inline int driver_match_device(struct device_driver *drv, struct device *dev) { - return drv->bus->match && drv->bus->match(dev, drv); + return drv->bus->match ? drv->bus->match(dev, drv) : 1; } extern void sysdev_shutdown(void); diff --git a/drivers/base/core.c b/drivers/base/core.c index e73c92d13a23..d230ff4b3eec 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1142,6 +1142,9 @@ int device_for_each_child(struct device *parent, void *data, struct device *child; int error = 0; + if (!parent->p) + return 0; + klist_iter_init(&parent->p->klist_children, &i); while ((child = next_device(&i)) && !error) error = fn(child, data); diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d2198f64ad4e..b5b6c973a2e0 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -990,6 +990,8 @@ int __init platform_bus_init(void) { int error; + early_platform_cleanup(); + error = device_register(&platform_bus); if (error) return error; @@ -1020,3 +1022,240 @@ u64 dma_get_required_mask(struct device *dev) } EXPORT_SYMBOL_GPL(dma_get_required_mask); #endif + +static __initdata LIST_HEAD(early_platform_driver_list); +static __initdata LIST_HEAD(early_platform_device_list); + +/** + * early_platform_driver_register + * @edrv: early_platform driver structure + * @buf: string passed from early_param() + */ +int __init early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf) +{ + unsigned long index; + int n; + + /* Simply add the driver to the end of the global list. + * Drivers will by default be put on the list in compiled-in order. + */ + if (!epdrv->list.next) { + INIT_LIST_HEAD(&epdrv->list); + list_add_tail(&epdrv->list, &early_platform_driver_list); + } + + /* If the user has specified device then make sure the driver + * gets prioritized. The driver of the last device specified on + * command line will be put first on the list. + */ + n = strlen(epdrv->pdrv->driver.name); + if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) { + list_move(&epdrv->list, &early_platform_driver_list); + + if (!strcmp(buf, epdrv->pdrv->driver.name)) + epdrv->requested_id = -1; + else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10, + &index) == 0) + epdrv->requested_id = index; + else + epdrv->requested_id = EARLY_PLATFORM_ID_ERROR; + } + + return 0; +} + +/** + * early_platform_add_devices - add a numbers of early platform devices + * @devs: array of early platform devices to add + * @num: number of early platform devices in array + */ +void __init early_platform_add_devices(struct platform_device **devs, int num) +{ + struct device *dev; + int i; + + /* simply add the devices to list */ + for (i = 0; i < num; i++) { + dev = &devs[i]->dev; + + if (!dev->devres_head.next) { + INIT_LIST_HEAD(&dev->devres_head); + list_add_tail(&dev->devres_head, + &early_platform_device_list); + } + } +} + +/** + * early_platform_driver_register_all + * @class_str: string to identify early platform driver class + */ +void __init early_platform_driver_register_all(char *class_str) +{ + /* The "class_str" parameter may or may not be present on the kernel + * command line. If it is present then there may be more than one + * matching parameter. + * + * Since we register our early platform drivers using early_param() + * we need to make sure that they also get registered in the case + * when the parameter is missing from the kernel command line. + * + * We use parse_early_options() to make sure the early_param() gets + * called at least once. The early_param() may be called more than + * once since the name of the preferred device may be specified on + * the kernel command line. early_platform_driver_register() handles + * this case for us. + */ + parse_early_options(class_str); +} + +/** + * early_platform_match + * @edrv: early platform driver structure + * @id: id to match against + */ +static __init struct platform_device * +early_platform_match(struct early_platform_driver *epdrv, int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id == id) + return pd; + + return NULL; +} + +/** + * early_platform_left + * @edrv: early platform driver structure + * @id: return true if id or above exists + */ +static __init int early_platform_left(struct early_platform_driver *epdrv, + int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id >= id) + return 1; + + return 0; +} + +/** + * early_platform_driver_probe_id + * @class_str: string to identify early platform driver class + * @id: id to match against + * @nr_probe: number of platform devices to successfully probe before exiting + */ +static int __init early_platform_driver_probe_id(char *class_str, + int id, + int nr_probe) +{ + struct early_platform_driver *epdrv; + struct platform_device *match; + int match_id; + int n = 0; + int left = 0; + + list_for_each_entry(epdrv, &early_platform_driver_list, list) { + /* only use drivers matching our class_str */ + if (strcmp(class_str, epdrv->class_str)) + continue; + + if (id == -2) { + match_id = epdrv->requested_id; + left = 1; + + } else { + match_id = id; + left += early_platform_left(epdrv, id); + + /* skip requested id */ + switch (epdrv->requested_id) { + case EARLY_PLATFORM_ID_ERROR: + case EARLY_PLATFORM_ID_UNSET: + break; + default: + if (epdrv->requested_id == id) + match_id = EARLY_PLATFORM_ID_UNSET; + } + } + + switch (match_id) { + case EARLY_PLATFORM_ID_ERROR: + pr_warning("%s: unable to parse %s parameter\n", + class_str, epdrv->pdrv->driver.name); + /* fall-through */ + case EARLY_PLATFORM_ID_UNSET: + match = NULL; + break; + default: + match = early_platform_match(epdrv, match_id); + } + + if (match) { + if (epdrv->pdrv->probe(match)) + pr_warning("%s: unable to probe %s early.\n", + class_str, match->name); + else + n++; + } + + if (n >= nr_probe) + break; + } + + if (left) + return n; + else + return -ENODEV; +} + +/** + * early_platform_driver_probe + * @class_str: string to identify early platform driver class + * @nr_probe: number of platform devices to successfully probe before exiting + * @user_only: only probe user specified early platform devices + */ +int __init early_platform_driver_probe(char *class_str, + int nr_probe, + int user_only) +{ + int k, n, i; + + n = 0; + for (i = -2; n < nr_probe; i++) { + k = early_platform_driver_probe_id(class_str, i, nr_probe - n); + + if (k < 0) + break; + + n += k; + + if (user_only) + break; + } + + return n; +} + +/** + * early_platform_cleanup - clean up early platform code + */ +void __init early_platform_cleanup(void) +{ + struct platform_device *pd, *pd2; + + /* clean up the devres list used to chain devices */ + list_for_each_entry_safe(pd, pd2, &early_platform_device_list, + dev.devres_head) { + list_del(&pd->dev.devres_head); + memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head)); + } +} + diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 69b7f8e77596..689cd27ac890 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int endp; int len; int rc; @@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } + endp = usb_pipeendpoint(sc->last_pipe); + if (usb_pipein(sc->last_pipe)) + endp |= USB_DIR_IN; + if (cmd->state == UB_CMDST_CLEAR) { if (urb->status == -EPIPE) { /* @@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_sense(sc, cmd); @@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat(sc, cmd); @@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * We ignore the result for the halt clear. */ - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe), - usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); ub_state_stat_counted(sc, cmd); @@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) del_timer_sync(&timer); usb_kill_urb(&sc->work_urb); - /* reset the endpoint toggle */ - usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0); + usb_reset_endpoint(sc->dev, endp); return 0; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 3586b3b3df3f..8f05c38c2f06 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -301,33 +301,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma) } #endif -void __attribute__((weak)) -map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot) -{ - /* nothing. architectures can override. */ -} - -void __attribute__((weak)) -unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot) -{ - /* nothing. architectures can override. */ -} - -static void mmap_mem_open(struct vm_area_struct *vma) -{ - map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void mmap_mem_close(struct vm_area_struct *vma) -{ - unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - static struct vm_operations_struct mmap_mem_ops = { - .open = mmap_mem_open, - .close = mmap_mem_close, #ifdef CONFIG_HAVE_IOREMAP_PROT .access = generic_access_phys #endif @@ -362,7 +336,6 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma) vma->vm_pgoff, size, vma->vm_page_prot)) { - unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot); return -EAGAIN; } return 0; diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index ebf4be5b7c4e..2d175b5928ff 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list); static struct bus_type gameport_bus; -static void gameport_add_driver(struct gameport_driver *drv); static void gameport_add_port(struct gameport *gameport); -static void gameport_destroy_port(struct gameport *gameport); +static void gameport_attach_driver(struct gameport_driver *drv); static void gameport_reconnect_port(struct gameport *gameport); static void gameport_disconnect_port(struct gameport *gameport); @@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport) enum gameport_event_type { GAMEPORT_REGISTER_PORT, - GAMEPORT_REGISTER_DRIVER, GAMEPORT_ATTACH_DRIVER, }; @@ -374,8 +372,8 @@ static void gameport_handle_event(void) gameport_add_port(event->object); break; - case GAMEPORT_REGISTER_DRIVER: - gameport_add_driver(event->object); + case GAMEPORT_ATTACH_DRIVER: + gameport_attach_driver(event->object); break; default: @@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev) return 0; } -static void gameport_add_driver(struct gameport_driver *drv) +static void gameport_attach_driver(struct gameport_driver *drv) { int error; - error = driver_register(&drv->driver); + error = driver_attach(&drv->driver); if (error) printk(KERN_ERR - "gameport: driver_register() failed for %s, error: %d\n", + "gameport: driver_attach() failed for %s, error: %d\n", drv->driver.name, error); } diff --git a/drivers/input/input.c b/drivers/input/input.c index d44065d2e662..935a1835de2d 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1549,7 +1549,6 @@ int input_register_handle(struct input_handle *handle) return error; list_add_tail_rcu(&handle->d_node, &dev->h_list); mutex_unlock(&dev->mutex); - synchronize_rcu(); /* * Since we are supposed to be called from ->connect() diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f999dc60c3b8..444dec07e5d8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -880,7 +880,7 @@ static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { }; /* - * Samsung NC10 with Fn+F? key release not working + * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U @@ -1534,6 +1534,24 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .driver_data = atkbd_samsung_forced_release_keys, }, { + .ident = "Samsung NC20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung SQ45S70S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { .ident = "Fujitsu Amilo PA 1510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index e94b7d735aca..d427f322e207 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) } error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - IRQF_SAMPLE_RANDOM, DRV_NAME, pdev); + 0, DRV_NAME, pdev); if (error) { printk(KERN_ERR DRV_NAME ": unable to claim irq %d; error %d\n", diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 203abac1e23e..5c0a631d1455 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_SGI_BTNS config HP_SDC_RTC tristate "HP SDC Real Time Clock" - depends on GSC || HP300 + depends on (GSC || HP300) && SERIO select HP_SDC help Say Y here if you want to support the built-in real time clock diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index f63995f854ff..3941f97cfa60 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -108,7 +108,6 @@ static int pc110pad_open(struct input_dev *dev) */ static int __init pc110pad_init(void) { - struct pci_dev *dev; int err; if (!no_pci_devices()) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 83ed2d56b924..fb8a3cd3ffd0 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -377,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { } }; +static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, + { + .ident = "LG Electronics X110", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X110"), + DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), + }, + }, + { } +}; + #ifdef CONFIG_PNP static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { { @@ -386,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), }, }, + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, { } }; #endif @@ -698,6 +723,9 @@ static int __init i8042_platform_init(void) #endif #ifdef CONFIG_X86 + if (dmi_check_system(i8042_dmi_reset_table)) + i8042_reset = 1; + if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = 1; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 170f71ee5772..3cffb704e374 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -712,22 +712,43 @@ static int i8042_controller_check(void) static int i8042_controller_selftest(void) { unsigned char param; + int i = 0; if (!i8042_reset) return 0; - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -ENODEV; - } + /* + * We try this 5 times; on some really fragile systems this does not + * take the first time... + */ + do { + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -ENODEV; + } + + if (param == I8042_RET_CTL_TEST) + return 0; - if (param != I8042_RET_CTL_TEST) { printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -EIO; - } + param, I8042_RET_CTL_TEST); + msleep(50); + } while (i++ < 5); +#ifdef CONFIG_X86 + /* + * On x86, we don't fail entire i8042 initialization if controller + * reset fails in hopes that keyboard port will still be functional + * and user will still get a working keyboard. This is especially + * important on netbooks. On other arches we trust hardware more. + */ + printk(KERN_INFO + "i8042: giving up on controller selftest, continuing anyway...\n"); return 0; +#else + return -EIO; +#endif } /* diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index e4728a28f492..ecaeb7e8e75e 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -736,8 +736,8 @@ static int __devinit ad7877_probe(struct spi_device *spi) /* Request AD7877 /DAV GPIO interrupt */ - err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING | - IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts); + err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING, + spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); goto err_free_mem; diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index ea4c61d68683..5d8a70398807 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -448,8 +448,7 @@ static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) ad7879_setup(ts); err = request_irq(bus->irq, ad7879_irq, - IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM, - bus->dev.driver->name, ts); + IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts); if (err) { dev_err(&bus->dev, "irq %d busy?\n", bus->irq); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 056ac77e2cf0..2b01e56568f8 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -127,6 +127,8 @@ struct ads7846 { void (*filter_cleanup)(void *data); int (*get_pendown_state)(void); int gpio_pendown; + + void (*wait_for_sync)(void); }; /* leave chip selected when we're done, for quicker re-select? */ @@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts) return !gpio_get_value(ts->gpio_pendown); } +static void null_wait_for_sync(void) +{ +} + /* * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, * to retrieve touchscreen status. @@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads) default: BUG(); } + ts->wait_for_sync(); status = spi_async(ts->spi, m); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", @@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) } else { /* pen is still down, continue with the measurement */ ts->msg_idx = 0; + ts->wait_for_sync(); status = spi_async(ts->spi, &ts->msg[0]); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", status); @@ -746,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle) * that here. (The "generic irq" framework may help...) */ ts->irq_disabled = 1; - disable_irq(ts->spi->irq); + disable_irq_nosync(ts->spi->irq); ts->pending = 1; hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); @@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->penirq_recheck_delay_usecs = pdata->penirq_recheck_delay_usecs; + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); input_dev->name = "ADS784x Touchscreen"; diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index fa67d782c3c3..3ffd4c4b170c 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006-2008 Marvell International Ltd. * Fengwei Yin <fengwei.yin@marvell.com> + * Bin Yang <bin.yang@marvell.com> * Eric Miao <eric.miao@marvell.com> * * This program is free software; you can redistribute it and/or modify @@ -175,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) goto err_reset; touch->state = STATE_STOP; + + /* FIXME: PEN_{UP/DOWN} events are expected to be + * available by stopping TSI, but this is found not + * always true, delay and simulate such an event + * here is more reliable + */ + mdelay(1); + da9034_event_handler(touch, + is_pen_down(touch) ? EVENT_PEN_DOWN : + EVENT_PEN_UP); break; case STATE_STOP: @@ -189,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) report_pen_up(touch); touch->state = STATE_IDLE; } - - input_sync(touch->input_dev); break; case STATE_WAIT: @@ -200,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) if (is_pen_down(touch)) { start_tsi(touch); touch->state = STATE_BUSY; - } else + } else { + report_pen_up(touch); touch->state = STATE_IDLE; + } break; } return; @@ -226,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb, struct da9034_touch *touch = container_of(nb, struct da9034_touch, notifier); - if (event & DA9034_EVENT_PEN_DOWN) { - if (is_pen_down(touch)) - da9034_event_handler(touch, EVENT_PEN_DOWN); - else - da9034_event_handler(touch, EVENT_PEN_UP); - } - if (event & DA9034_EVENT_TSI_READY) da9034_event_handler(touch, EVENT_TSI_READY); + if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) + da9034_event_handler(touch, EVENT_PEN_DOWN); + return 0; } @@ -385,6 +392,6 @@ static void __exit da9034_touch_exit(void) module_exit(da9034_touch_exit); MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); -MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:da9034-touch"); diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index dfa6a84ab50a..4cc047a5116e 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) #else static void wm97xx_acc_pen_up(struct wm97xx *wm) { - int count = 16; + unsigned int count; + schedule_timeout_uninterruptible(1); - while (count < 16) { + for (count = 0; count < 16; count++) MODR; - count--; - } } #endif diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index cec480bffe38..69af8385ab14 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ BUG_ON(!wm->mach_ops->irq_enable); - if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, + if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, "wm97xx-pen", wm)) { dev_err(wm->dev, "Failed to register pen down interrupt, polling"); diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index ec3c0e507669..2b3a055059ea 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb) if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) { /* Special case handling for pipe reset */ le16_to_cpus(&ctrl_msg->dr.wIndex); - - /* toggle is reset on clear */ - usb_settoggle(adapter->usb_dev, - ctrl_msg->dr.wIndex & ~USB_DIR_IN, - (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0, - 0); - - + usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex); } if (ctrl_msg->complete) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index d9d974a8f52a..add3395d3248 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) return ret; } - usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0); usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f)); pipe = usb_sndctrlpipe(hdw->usb_dev, 0); diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c index d0d0c2fee054..02f64d578641 100644 --- a/drivers/net/a2065.c +++ b/drivers/net/a2065.c @@ -692,6 +692,17 @@ static struct zorro_driver a2065_driver = { .remove = __devexit_p(a2065_remove_one), }; +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_set_multicast_list = lance_set_multicast, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit a2065_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { @@ -753,12 +764,8 @@ static int __devinit a2065_init_one(struct zorro_dev *z, priv->rx_ring_mod_mask = RX_RING_MOD_MASK; priv->tx_ring_mod_mask = TX_RING_MOD_MASK; - dev->open = &lance_open; - dev->stop = &lance_close; - dev->hard_start_xmit = &lance_start_xmit; - dev->tx_timeout = &lance_tx_timeout; + dev->netdev_ops = &lance_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->set_multicast_list = &lance_set_multicast; dev->dma = 0; init_timer(&priv->multicast_timer); diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c index e1d72e06f3e1..58e8d522e5bc 100644 --- a/drivers/net/ariadne.c +++ b/drivers/net/ariadne.c @@ -155,6 +155,18 @@ static struct zorro_driver ariadne_driver = { .remove = __devexit_p(ariadne_remove_one), }; +static const struct net_device_ops ariadne_netdev_ops = { + .ndo_open = ariadne_open, + .ndo_stop = ariadne_close, + .ndo_start_xmit = ariadne_start_xmit, + .ndo_tx_timeout = ariadne_tx_timeout, + .ndo_get_stats = ariadne_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ariadne_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { @@ -197,13 +209,8 @@ static int __devinit ariadne_init_one(struct zorro_dev *z, dev->mem_start = ZTWO_VADDR(mem_start); dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE; - dev->open = &ariadne_open; - dev->stop = &ariadne_close; - dev->hard_start_xmit = &ariadne_start_xmit; - dev->tx_timeout = &ariadne_tx_timeout; + dev->netdev_ops = &ariadne_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->get_stats = &ariadne_get_stats; - dev->set_multicast_list = &set_multicast_list; err = register_netdev(dev); if (err) { diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 4bc6901b3819..627bc75da17d 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -665,6 +665,20 @@ static void __init am79c961_banner(void) if (net_debug && version_printed++ == 0) printk(KERN_INFO "%s", version); } +static const struct net_device_ops am79c961_netdev_ops = { + .ndo_open = am79c961_open, + .ndo_stop = am79c961_close, + .ndo_start_xmit = am79c961_sendpacket, + .ndo_get_stats = am79c961_getstats, + .ndo_set_multicast_list = am79c961_setmulticastlist, + .ndo_tx_timeout = am79c961_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = am79c961_poll_controller, +#endif +}; static int __init am79c961_probe(struct platform_device *pdev) { @@ -732,15 +746,7 @@ static int __init am79c961_probe(struct platform_device *pdev) if (am79c961_hw_init(dev)) goto release; - dev->open = am79c961_open; - dev->stop = am79c961_close; - dev->hard_start_xmit = am79c961_sendpacket; - dev->get_stats = am79c961_getstats; - dev->set_multicast_list = am79c961_setmulticastlist; - dev->tx_timeout = am79c961_timeout; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = am79c961_poll_controller; -#endif + dev->netdev_ops = &am79c961_netdev_ops; ret = register_netdev(dev); if (ret == 0) { diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 442938d50380..7f4bc8ae5462 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -577,7 +577,7 @@ static void at91ether_sethashtable(struct net_device *dev) /* * Enable/Disable promiscuous and multicast modes. */ -static void at91ether_set_rx_mode(struct net_device *dev) +static void at91ether_set_multicast_list(struct net_device *dev) { unsigned long cfg; @@ -808,7 +808,7 @@ static int at91ether_close(struct net_device *dev) /* * Transmit packet. */ -static int at91ether_tx(struct sk_buff *skb, struct net_device *dev) +static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct at91_private *lp = netdev_priv(dev); @@ -828,7 +828,7 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; } else { - printk(KERN_ERR "at91_ether.c: at91ether_tx() called, but device is busy!\n"); + printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n"); return 1; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb) on this skb, he also reports -ENETDOWN and printk's, so either we free and return(0) or don't free and return 1 */ @@ -965,6 +965,21 @@ static void at91ether_poll_controller(struct net_device *dev) } #endif +static const struct net_device_ops at91ether_netdev_ops = { + .ndo_open = at91ether_open, + .ndo_stop = at91ether_close, + .ndo_start_xmit = at91ether_start_xmit, + .ndo_get_stats = at91ether_stats, + .ndo_set_multicast_list = at91ether_set_multicast_list, + .ndo_set_mac_address = set_mac_address, + .ndo_do_ioctl = at91ether_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = at91ether_poll_controller, +#endif +}; + /* * Initialize the ethernet interface */ @@ -1005,17 +1020,8 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add spin_lock_init(&lp->lock); ether_setup(dev); - dev->open = at91ether_open; - dev->stop = at91ether_close; - dev->hard_start_xmit = at91ether_tx; - dev->get_stats = at91ether_stats; - dev->set_multicast_list = at91ether_set_rx_mode; - dev->set_mac_address = set_mac_address; + dev->netdev_ops = &at91ether_netdev_ops; dev->ethtool_ops = &at91ether_ethtool_ops; - dev->do_ioctl = at91ether_ioctl; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = at91ether_poll_controller; -#endif SET_NETDEV_DEV(dev, &pdev->dev); diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index cc7708775da0..b72b3d639f6e 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -153,7 +153,7 @@ struct ep93xx_descs struct ep93xx_priv { struct resource *res; - void *base_addr; + void __iomem *base_addr; int irq; struct ep93xx_descs *descs; @@ -770,7 +770,18 @@ static struct ethtool_ops ep93xx_ethtool_ops = { .get_link = ep93xx_get_link, }; -struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) +static const struct net_device_ops ep93xx_netdev_ops = { + .ndo_open = ep93xx_open, + .ndo_stop = ep93xx_close, + .ndo_start_xmit = ep93xx_xmit, + .ndo_get_stats = ep93xx_get_stats, + .ndo_do_ioctl = ep93xx_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) { struct net_device *dev; @@ -780,12 +791,8 @@ struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data) memcpy(dev->dev_addr, data->dev_addr, ETH_ALEN); - dev->get_stats = ep93xx_get_stats; dev->ethtool_ops = &ep93xx_ethtool_ops; - dev->hard_start_xmit = ep93xx_xmit; - dev->open = ep93xx_open; - dev->stop = ep93xx_close; - dev->do_ioctl = ep93xx_ioctl; + dev->netdev_ops = &ep93xx_netdev_ops; dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c index e380de454463..edf770f639fa 100644 --- a/drivers/net/arm/ether1.c +++ b/drivers/net/arm/ether1.c @@ -991,6 +991,18 @@ static void __devinit ether1_banner(void) printk(KERN_INFO "%s", version); } +static const struct net_device_ops ether1_netdev_ops = { + .ndo_open = ether1_open, + .ndo_stop = ether1_close, + .ndo_start_xmit = ether1_sendpacket, + .ndo_get_stats = ether1_getstats, + .ndo_set_multicast_list = ether1_setmulticastlist, + .ndo_tx_timeout = ether1_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ether1_probe(struct expansion_card *ec, const struct ecard_id *id) { @@ -1031,12 +1043,7 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id) goto free; } - dev->open = ether1_open; - dev->stop = ether1_close; - dev->hard_start_xmit = ether1_sendpacket; - dev->get_stats = ether1_getstats; - dev->set_multicast_list = ether1_setmulticastlist; - dev->tx_timeout = ether1_timeout; + dev->netdev_ops = ðer1_netdev_ops; dev->watchdog_timeo = 5 * HZ / 100; ret = register_netdev(dev); diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c index 21a7bef12d3b..ec8a1ae1e887 100644 --- a/drivers/net/arm/ether3.c +++ b/drivers/net/arm/ether3.c @@ -770,6 +770,18 @@ static void __devinit ether3_banner(void) printk(KERN_INFO "%s", version); } +static const struct net_device_ops ether3_netdev_ops = { + .ndo_open = ether3_open, + .ndo_stop = ether3_close, + .ndo_start_xmit = ether3_sendpacket, + .ndo_get_stats = ether3_getstats, + .ndo_set_multicast_list = ether3_setmulticastlist, + .ndo_tx_timeout = ether3_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __devinit ether3_probe(struct expansion_card *ec, const struct ecard_id *id) { @@ -846,12 +858,7 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id) goto free; } - dev->open = ether3_open; - dev->stop = ether3_close; - dev->hard_start_xmit = ether3_sendpacket; - dev->get_stats = ether3_getstats; - dev->set_multicast_list = ether3_setmulticastlist; - dev->tx_timeout = ether3_timeout; + dev->netdev_ops = ðer3_netdev_ops; dev->watchdog_timeo = 5 * HZ / 100; ret = register_netdev(dev); diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index 2d81f6afcb58..5425ab0c38c0 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -453,6 +453,16 @@ static noinline int __init addr_accessible(volatile void *regp, int wordflag, return( ret ); } +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = lance_set_mac_address, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; static unsigned long __init lance_probe1( struct net_device *dev, struct lance_addr *init_rec ) @@ -623,15 +633,9 @@ static unsigned long __init lance_probe1( struct net_device *dev, if (did_version++ == 0) DPRINTK( 1, ( version )); - /* The LANCE-specific entries in the device structure. */ - dev->open = &lance_open; - dev->hard_start_xmit = &lance_start_xmit; - dev->stop = &lance_close; - dev->set_multicast_list = &set_multicast_list; - dev->set_mac_address = &lance_set_mac_address; + dev->netdev_ops = &lance_netdev_ops; /* XXX MSch */ - dev->tx_timeout = lance_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; return( 1 ); diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 4274e4ac963b..d58c105fc779 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1004,12 +1004,12 @@ static void au1000_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } -static void set_rx_mode(struct net_device *dev) +static void au1000_multicast_list(struct net_device *dev) { struct au1000_private *aup = netdev_priv(dev); if (au1000_debug > 4) - printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags); + printk("%s: au1000_multicast_list: flags=%x\n", dev->name, dev->flags); if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ aup->mac->control |= MAC_PROMISCUOUS; @@ -1047,6 +1047,18 @@ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return phy_mii_ioctl(aup->phy_dev, if_mii(rq), cmd); } +static const struct net_device_ops au1000_netdev_ops = { + .ndo_open = au1000_open, + .ndo_stop = au1000_close, + .ndo_start_xmit = au1000_tx, + .ndo_set_multicast_list = au1000_multicast_list, + .ndo_do_ioctl = au1000_ioctl, + .ndo_tx_timeout = au1000_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static struct net_device * au1000_probe(int port_num) { static unsigned version_printed = 0; @@ -1197,13 +1209,8 @@ static struct net_device * au1000_probe(int port_num) dev->base_addr = base; dev->irq = irq; - dev->open = au1000_open; - dev->hard_start_xmit = au1000_tx; - dev->stop = au1000_close; - dev->set_multicast_list = &set_rx_mode; - dev->do_ioctl = &au1000_ioctl; + dev->netdev_ops = &au1000_netdev_ops; SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->tx_timeout = au1000_tx_timeout; dev->watchdog_timeo = ETH_TX_TIMEOUT; /* diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index 04f4b73fa8d8..9592f22e4c8c 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -319,7 +319,7 @@ be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause, &ecmd->rx_pause); - ecmd->autoneg = AUTONEG_ENABLE; + ecmd->autoneg = 0; } static int @@ -328,7 +328,7 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) struct be_adapter *adapter = netdev_priv(netdev); int status; - if (ecmd->autoneg != AUTONEG_ENABLE) + if (ecmd->autoneg != 0) return -EINVAL; status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause, diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9afe8092dfc4..9f971ed6b58d 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,6 +979,20 @@ static int bfin_mac_open(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + /* * * this makes the board clean up everything that it can @@ -1086,15 +1100,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev) /* Fill in the fields of the device structure with ethernet values. */ ether_setup(ndev); - ndev->open = bfin_mac_open; - ndev->stop = bfin_mac_close; - ndev->hard_start_xmit = bfin_mac_hard_start_xmit; - ndev->set_mac_address = bfin_mac_set_mac_address; - ndev->tx_timeout = bfin_mac_timeout; - ndev->set_multicast_list = bfin_mac_set_multicast_list; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = bfin_mac_poll; -#endif + ndev->netdev_ops = &bfin_mac_netdev_ops; ndev->ethtool_ops = &bfin_mac_ethtool_ops; spin_lock_init(&lp->lock); diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 8dc6fbb9a41e..553a89919778 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -370,8 +370,6 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct if (arp->op_code == htons(ARPOP_REPLY)) { /* update rx hash table for this ARP */ - printk("rar: update orig %s bond_dev %s\n", orig_dev->name, - bond_dev->name); bond = netdev_priv(bond_dev); rlb_update_entry_from_arp(bond, arp); pr_debug("Server received an ARP Reply from client\n"); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 99610f358c40..63369b6b14d4 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2570,7 +2570,7 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { if (!targets[i]) - continue; + break; pr_debug("basa: target %x\n", targets[i]); if (list_empty(&bond->vlan_list)) { pr_debug("basa: empty vlan: arp_send\n"); @@ -2677,7 +2677,6 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 int i; __be32 *targets = bond->params.arp_targets; - targets = bond->params.arp_targets; for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n", &sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip)); @@ -3303,7 +3302,7 @@ static void bond_info_show_master(struct seq_file *seq) for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) { if (!bond->params.arp_targets[i]) - continue; + break; if (printed) seq_printf(seq, ","); seq_printf(seq, " %pI4", &bond->params.arp_targets[i]); diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 18cf4787874c..d28731535226 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -684,17 +684,15 @@ static ssize_t bonding_store_arp_targets(struct device *d, goto out; } /* look for an empty slot to put the target in, and check for dupes */ - for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) { if (targets[i] == newtarget) { /* duplicate */ printk(KERN_ERR DRV_NAME ": %s: ARP target %pI4 is already present\n", bond->dev->name, &newtarget); - if (done) - targets[i] = 0; ret = -EINVAL; goto out; } - if (targets[i] == 0 && !done) { + if (targets[i] == 0) { printk(KERN_INFO DRV_NAME ": %s: adding ARP target %pI4.\n", bond->dev->name, &newtarget); @@ -720,12 +718,16 @@ static ssize_t bonding_store_arp_targets(struct device *d, goto out; } - for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) { if (targets[i] == newtarget) { + int j; printk(KERN_INFO DRV_NAME ": %s: removing ARP target %pI4.\n", bond->dev->name, &newtarget); - targets[i] = 0; + for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++) + targets[j] = targets[j+1]; + + targets[j] = 0; done = 1; } } diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index c9806c58b2fd..7a18dc7e5c7f 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -257,6 +257,23 @@ struct transceiver_ops transceivers[] = struct transceiver_ops* transceiver = &transceivers[0]; +static const struct net_device_ops e100_netdev_ops = { + .ndo_open = e100_open, + .ndo_stop = e100_close, + .ndo_start_xmit = e100_send_packet, + .ndo_tx_timeout = e100_tx_timeout, + .ndo_get_stats = e100_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = e100_ioctl, + .ndo_set_mac_address = e100_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_config = e100_set_config, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = e100_netpoll, +#endif +}; + #define tx_done(dev) (*R_DMA_CH0_CMD == 0) /* @@ -300,19 +317,8 @@ etrax_ethernet_init(void) /* fill in our handlers so the network layer can talk to us in the future */ - dev->open = e100_open; - dev->hard_start_xmit = e100_send_packet; - dev->stop = e100_close; - dev->get_stats = e100_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->set_mac_address = e100_set_mac_address; dev->ethtool_ops = &e100_ethtool_ops; - dev->do_ioctl = e100_ioctl; - dev->set_config = e100_set_config; - dev->tx_timeout = e100_tx_timeout; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = e100_netpoll; -#endif + dev->netdev_ops = &e100_netdev_ops; spin_lock_init(&np->lock); spin_lock_init(&np->led_lock); diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 861c867fca87..b62405a69180 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -1010,6 +1010,17 @@ static void lance_set_multicast_retry(unsigned long _opaque) lance_set_multicast(dev); } +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_set_multicast_list = lance_set_multicast, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init dec_lance_probe(struct device *bdev, const int type) { static unsigned version_printed; @@ -1223,12 +1234,8 @@ static int __init dec_lance_probe(struct device *bdev, const int type) printk(", addr = %pM, irq = %d\n", dev->dev_addr, dev->irq); - dev->open = &lance_open; - dev->stop = &lance_close; - dev->hard_start_xmit = &lance_start_xmit; - dev->tx_timeout = &lance_tx_timeout; + dev->netdev_ops = &lance_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->set_multicast_list = &lance_set_multicast; /* lp->ll is the location of the registers for lance card */ lp->ll = ll; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ddc5c533e89c..ef12931d302a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -156,8 +156,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); static int e1000_resume(struct pci_dev *pdev); #endif static void e1000_shutdown(struct pci_dev *pdev); @@ -3834,7 +3834,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned; + bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; @@ -4601,7 +4601,7 @@ int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) return 0; } -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -4664,22 +4664,18 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { ew32(WUC, 0); ew32(WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } e1000_release_manageability(adapter); + *enable_wake = !!wufc; + /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->en_mng_pt) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } + if (adapter->en_mng_pt) + *enable_wake = true; if (hw->phy_type == e1000_phy_igp_3) e1000_phy_powerdown_workaround(hw); @@ -4693,12 +4689,29 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; } #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __e1000_shutdown(pdev, &wake); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + static int e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -4753,7 +4766,14 @@ static int e1000_resume(struct pci_dev *pdev) static void e1000_shutdown(struct pci_dev *pdev) { - e1000_suspend(pdev, PMSG_SUSPEND); + bool wake; + + __e1000_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } } #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 409b58cad0e5..1693ed116b16 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -621,7 +621,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned; + bool cleaned = false; unsigned int total_tx_bytes = 0, total_tx_packets = 0; i = tx_ring->next_to_clean; @@ -4346,7 +4346,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) } } -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -4409,20 +4409,16 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) ew32(WUC, E1000_WUC_PME_EN); ew32(WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { ew32(WUC, 0); ew32(WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } + *enable_wake = !!wufc; + /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->flags & FLAG_MNG_PT_ENABLED) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } + if (adapter->flags & FLAG_MNG_PT_ENABLED) + *enable_wake = true; if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -4435,6 +4431,26 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_disable_device(pdev); + return 0; +} + +static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) +{ + if (sleep && wake) { + pci_prepare_to_sleep(pdev); + return; + } + + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); +} + +static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, + bool wake) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct e1000_adapter *adapter = netdev_priv(netdev); + /* * The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To @@ -4450,14 +4466,12 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + e1000_power_off(pdev, sleep, wake); pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl); } else { - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + e1000_power_off(pdev, sleep, wake); } - - return 0; } static void e1000e_disable_l1aspm(struct pci_dev *pdev) @@ -4486,6 +4500,18 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev) } #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __e1000_shutdown(pdev, &wake); + if (!retval) + e1000_complete_shutdown(pdev, true, wake); + + return retval; +} + static int e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -4549,7 +4575,12 @@ static int e1000_resume(struct pci_dev *pdev) static void e1000_shutdown(struct pci_dev *pdev) { - e1000_suspend(pdev, PMSG_SUSPEND); + bool wake = false; + + __e1000_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) + e1000_complete_shutdown(pdev, false, wake); } #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index ac0c5b438e0a..604c844d0769 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3080,7 +3080,8 @@ static const struct net_device_ops ehea_netdev_ops = { .ndo_change_mtu = ehea_change_mtu, .ndo_vlan_rx_register = ehea_vlan_rx_register, .ndo_vlan_rx_add_vid = ehea_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid + .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid, + .ndo_tx_timeout = ehea_tx_watchdog, }; struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, @@ -3142,7 +3143,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER | NETIF_F_LLTX; - dev->tx_timeout = &ehea_tx_watchdog; dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; INIT_WORK(&port->reset_task, ehea_reset_port); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d37465020bcc..11d5db16ed9c 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3745,14 +3745,14 @@ static int nv_napi_poll(struct napi_struct *napi, int budget) mod_timer(&np->nic_poll, jiffies + POLL_WAIT); } spin_unlock_irqrestore(&np->lock, flags); - __napi_complete(napi); + napi_complete(napi); return rx_work; } if (rx_work < budget) { /* re-enable interrupts (msix not enabled in napi) */ - __napi_complete(napi); + napi_complete(napi); writel(np->irqmask, base + NvRegIrqMask); } diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index b037ce9857bf..a9cbc3191a2a 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1019,6 +1019,22 @@ out_put_phy: #define IS_FEC(match) 0 #endif +static const struct net_device_ops fs_enet_netdev_ops = { + .ndo_open = fs_enet_open, + .ndo_stop = fs_enet_close, + .ndo_get_stats = fs_enet_get_stats, + .ndo_start_xmit = fs_enet_start_xmit, + .ndo_tx_timeout = fs_timeout, + .ndo_set_multicast_list = fs_set_multicast_list, + .ndo_do_ioctl = fs_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = fs_enet_netpoll, +#endif +}; + static int __devinit fs_enet_probe(struct of_device *ofdev, const struct of_device_id *match) { @@ -1093,22 +1109,13 @@ static int __devinit fs_enet_probe(struct of_device *ofdev, fep->tx_ring = fpi->tx_ring; fep->rx_ring = fpi->rx_ring; - ndev->open = fs_enet_open; - ndev->hard_start_xmit = fs_enet_start_xmit; - ndev->tx_timeout = fs_timeout; + ndev->netdev_ops = &fs_enet_netdev_ops; ndev->watchdog_timeo = 2 * HZ; - ndev->stop = fs_enet_close; - ndev->get_stats = fs_enet_get_stats; - ndev->set_multicast_list = fs_set_multicast_list; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = fs_enet_netpoll; -#endif if (fpi->use_napi) netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi, fpi->napi_weight); ndev->ethtool_ops = &fs_ethtool_ops; - ndev->do_ioctl = fs_ioctl; init_timer(&fep->phy_timer_list); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 65f55877be95..b2c49679bba7 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1583,8 +1583,10 @@ static void gfar_reset_task(struct work_struct *work) struct net_device *dev = priv->ndev; if (dev->flags & IFF_UP) { + netif_stop_queue(dev); stop_gfar(dev); startup_gfar(dev); + netif_start_queue(dev); } netif_tx_schedule_all(dev); diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 77e4b5b52fc8..806533c831c7 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2686,6 +2686,32 @@ static int __devinit emac_init_config(struct emac_instance *dev) return 0; } +static const struct net_device_ops emac_netdev_ops = { + .ndo_open = emac_open, + .ndo_stop = emac_close, + .ndo_get_stats = emac_stats, + .ndo_set_multicast_list = emac_set_multicast_list, + .ndo_do_ioctl = emac_ioctl, + .ndo_tx_timeout = emac_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_start_xmit = emac_start_xmit, + .ndo_change_mtu = eth_change_mtu, +}; + +static const struct net_device_ops emac_gige_netdev_ops = { + .ndo_open = emac_open, + .ndo_stop = emac_close, + .ndo_get_stats = emac_stats, + .ndo_set_multicast_list = emac_set_multicast_list, + .ndo_do_ioctl = emac_ioctl, + .ndo_tx_timeout = emac_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_start_xmit = emac_start_xmit_sg, + .ndo_change_mtu = emac_change_mtu, +}; + static int __devinit emac_probe(struct of_device *ofdev, const struct of_device_id *match) { @@ -2827,23 +2853,14 @@ static int __devinit emac_probe(struct of_device *ofdev, if (err != 0) goto err_detach_tah; - /* Fill in the driver function table */ - ndev->open = &emac_open; if (dev->tah_dev) ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; - ndev->tx_timeout = &emac_tx_timeout; ndev->watchdog_timeo = 5 * HZ; - ndev->stop = &emac_close; - ndev->get_stats = &emac_stats; - ndev->set_multicast_list = &emac_set_multicast_list; - ndev->do_ioctl = &emac_ioctl; if (emac_phy_supports_gige(dev->phy_mode)) { - ndev->hard_start_xmit = &emac_start_xmit_sg; - ndev->change_mtu = &emac_change_mtu; + ndev->netdev_ops = &emac_gige_netdev_ops; dev->commac.ops = &emac_commac_sg_ops; - } else { - ndev->hard_start_xmit = &emac_start_xmit; - } + } else + ndev->netdev_ops = &emac_netdev_ops; SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); netif_carrier_off(ndev); diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index f4c315b5a900..472f3f124840 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -111,7 +111,7 @@ void igb_clear_vfta(struct e1000_hw *hw) * Writes value at the given offset in the register array which stores * the VLAN filter table. **/ -void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { array_wr32(E1000_VFTA, offset, value); wrfl(); diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index a34de5269637..1d690b4c9ae4 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -66,7 +66,6 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); s32 igb_check_alt_mac_addr(struct e1000_hw *hw); void igb_reset_adaptive(struct e1000_hw *hw); void igb_update_adaptive(struct e1000_hw *hw); -void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); bool igb_enable_mng_pass_thru(struct e1000_hw *hw); diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c index fe71c7ddaa05..840782fb5736 100644 --- a/drivers/net/igb/e1000_mbx.c +++ b/drivers/net/igb/e1000_mbx.c @@ -188,7 +188,7 @@ out: * returns SUCCESS if it successfully received a message notification and * copied it into the receive buffer. **/ -s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = -E1000_ERR_MBX; @@ -214,7 +214,7 @@ out: * returns SUCCESS if it successfully copied message into the buffer and * received an ack to that message within delay * timeout period **/ -s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) { struct e1000_mbx_info *mbx = &hw->mbx; s32 ret_val = 0; @@ -232,19 +232,6 @@ out: return ret_val; } -/** - * e1000_init_mbx_ops_generic - Initialize NVM function pointers - * @hw: pointer to the HW structure - * - * Setups up the function pointers to no-op functions - **/ -void e1000_init_mbx_ops_generic(struct e1000_hw *hw) -{ - struct e1000_mbx_info *mbx = &hw->mbx; - mbx->ops.read_posted = igb_read_posted_mbx; - mbx->ops.write_posted = igb_write_posted_mbx; -} - static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask) { u32 mbvficr = rd32(E1000_MBVFICR); diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/igb/e1000_mbx.h index 6ec9890a8f7a..ebc02ea3f198 100644 --- a/drivers/net/igb/e1000_mbx.h +++ b/drivers/net/igb/e1000_mbx.h @@ -67,8 +67,6 @@ s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16); s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 igb_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); -s32 igb_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); s32 igb_check_for_msg(struct e1000_hw *, u16); s32 igb_check_for_ack(struct e1000_hw *, u16); s32 igb_check_for_rst(struct e1000_hw *, u16); diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index db7274e62228..08c801490c72 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1261,25 +1261,32 @@ static int __devinit igb_probe(struct pci_dev *pdev, int i; unsigned char mac_addr[ETH_ALEN]; - if (num_vfs) + if (num_vfs) { adapter->vf_data = kcalloc(num_vfs, sizeof(struct vf_data_storage), GFP_KERNEL); - if (!adapter->vf_data) { - dev_err(&pdev->dev, "Could not allocate VF private " - "data - IOV enable failed\n"); - } else { - err = pci_enable_sriov(pdev, num_vfs); - if (!err) { - adapter->vfs_allocated_count = num_vfs; - dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs); - for (i = 0; i < adapter->vfs_allocated_count; i++) { - random_ether_addr(mac_addr); - igb_set_vf_mac(adapter, i, mac_addr); - } + if (!adapter->vf_data) { + dev_err(&pdev->dev, + "Could not allocate VF private data - " + "IOV enable failed\n"); } else { - kfree(adapter->vf_data); - adapter->vf_data = NULL; + err = pci_enable_sriov(pdev, num_vfs); + if (!err) { + adapter->vfs_allocated_count = num_vfs; + dev_info(&pdev->dev, + "%d vfs allocated\n", + num_vfs); + for (i = 0; + i < adapter->vfs_allocated_count; + i++) { + random_ether_addr(mac_addr); + igb_set_vf_mac(adapter, i, + mac_addr); + } + } else { + kfree(adapter->vf_data); + adapter->vf_data = NULL; + } } } } diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h index 936ed2a9435f..4bff35e46871 100644 --- a/drivers/net/igbvf/igbvf.h +++ b/drivers/net/igbvf/igbvf.h @@ -321,14 +321,11 @@ extern void igbvf_set_ethtool_ops(struct net_device *); extern int igbvf_up(struct igbvf_adapter *); extern void igbvf_down(struct igbvf_adapter *); extern void igbvf_reinit_locked(struct igbvf_adapter *); -extern void igbvf_reset(struct igbvf_adapter *); extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *); extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *); extern void igbvf_free_rx_resources(struct igbvf_ring *); extern void igbvf_free_tx_resources(struct igbvf_ring *); extern void igbvf_update_stats(struct igbvf_adapter *); -extern void igbvf_set_interrupt_capability(struct igbvf_adapter *); -extern void igbvf_reset_interrupt_capability(struct igbvf_adapter *); extern unsigned int copybreak; diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index c5648420dedf..b774666ad3cf 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -52,6 +52,9 @@ static const char igbvf_driver_string[] = static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation."; static int igbvf_poll(struct napi_struct *napi, int budget); +static void igbvf_reset(struct igbvf_adapter *); +static void igbvf_set_interrupt_capability(struct igbvf_adapter *); +static void igbvf_reset_interrupt_capability(struct igbvf_adapter *); static struct igbvf_info igbvf_vf_info = { .mac = e1000_vfadapt, @@ -990,7 +993,7 @@ static void igbvf_configure_msix(struct igbvf_adapter *adapter) e1e_flush(); } -void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) +static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) { if (adapter->msix_entries) { pci_disable_msix(adapter->pdev); @@ -1005,7 +1008,7 @@ void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter) * Attempt to configure interrupts using the best available * capabilities of the hardware and kernel. **/ -void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) +static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter) { int err = -ENOMEM; int i; @@ -1447,7 +1450,7 @@ static void igbvf_configure(struct igbvf_adapter *adapter) * set/changed during runtime. After reset the device needs to be * properly configured for Rx, Tx etc. */ -void igbvf_reset(struct igbvf_adapter *adapter) +static void igbvf_reset(struct igbvf_adapter *adapter) { struct e1000_mac_info *mac = &adapter->hw.mac; struct net_device *netdev = adapter->netdev; diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c index aa246c93279d..2a4faf9ade69 100644 --- a/drivers/net/igbvf/vf.c +++ b/drivers/net/igbvf/vf.c @@ -44,7 +44,7 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); * e1000_init_mac_params_vf - Inits MAC params * @hw: pointer to the HW structure **/ -s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; diff --git a/drivers/net/igbvf/vf.h b/drivers/net/igbvf/vf.h index ec07228f9478..1e8ce3741a67 100644 --- a/drivers/net/igbvf/vf.h +++ b/drivers/net/igbvf/vf.h @@ -259,7 +259,6 @@ struct e1000_hw { /* These functions must be implemented by drivers */ void e1000_rlpml_set_vf(struct e1000_hw *, u16); void e1000_init_function_pointers_vf(struct e1000_hw *hw); -s32 e1000_init_mac_params_vf(struct e1000_hw *hw); #endif /* _E1000_VF_H_ */ diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index cbc63ff13add..c5593f4665a4 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -1214,6 +1214,19 @@ static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3) } #endif +static const struct net_device_ops ioc3_netdev_ops = { + .ndo_open = ioc3_open, + .ndo_stop = ioc3_close, + .ndo_start_xmit = ioc3_start_xmit, + .ndo_tx_timeout = ioc3_timeout, + .ndo_get_stats = ioc3_get_stats, + .ndo_set_multicast_list = ioc3_set_multicast_list, + .ndo_do_ioctl = ioc3_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ioc3_set_mac_address, + .ndo_change_mtu = eth_change_mtu, +}; + static int __devinit ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1310,15 +1323,8 @@ static int __devinit ioc3_probe(struct pci_dev *pdev, ioc3_get_eaddr(ip); /* The IOC3-specific entries in the device structure. */ - dev->open = ioc3_open; - dev->hard_start_xmit = ioc3_start_xmit; - dev->tx_timeout = ioc3_timeout; dev->watchdog_timeo = 5 * HZ; - dev->stop = ioc3_close; - dev->get_stats = ioc3_get_stats; - dev->do_ioctl = ioc3_ioctl; - dev->set_multicast_list = ioc3_set_multicast_list; - dev->set_mac_address = ioc3_set_mac_address; + dev->netdev_ops = &ioc3_netdev_ops; dev->ethtool_ops = &ioc3_ethtool_ops; dev->features = NETIF_F_IP_CSUM; diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c index 3126678bdd3c..73585fd8f29f 100644 --- a/drivers/net/isa-skeleton.c +++ b/drivers/net/isa-skeleton.c @@ -181,6 +181,18 @@ out: } #endif +static const struct net_device_ops netcard_netdev_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = net_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* * This is the real probe routine. Linux has a history of friendly device * probes on the ISA bus. A good device probes avoids doing writes, and @@ -303,13 +315,7 @@ static int __init netcard_probe1(struct net_device *dev, int ioaddr) np = netdev_priv(dev); spin_lock_init(&np->lock); - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->get_stats = net_get_stats; - dev->set_multicast_list = &set_multicast_list; - - dev->tx_timeout = &net_tx_timeout; + dev->netdev_ops = &netcard_netdev_ops; dev->watchdog_timeo = MY_TX_TIMEOUT; err = register_netdev(dev); diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index de4db0dc7879..4791238c3f6e 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -885,61 +885,6 @@ static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) } /** - * ixgbe_blink_led_start_82598 - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index) -{ - ixgbe_link_speed speed = 0; - bool link_up = 0; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* - * Link must be up to auto-blink the LEDs on the 82598EB MAC; - * force it if link is down. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - - if (!link_up) { - autoc_reg |= IXGBE_AUTOC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - msleep(10); - } - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_82598 - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index) -{ - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - autoc_reg &= ~IXGBE_AUTOC_FLU; - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register * @hw: pointer to hardware structure * @reg: analog register to read @@ -1128,8 +1073,8 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .get_link_capabilities = &ixgbe_get_link_capabilities_82598, .led_on = &ixgbe_led_on_generic, .led_off = &ixgbe_led_off_generic, - .blink_led_start = &ixgbe_blink_led_start_82598, - .blink_led_stop = &ixgbe_blink_led_stop_82598, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, .set_rar = &ixgbe_set_rar_generic, .clear_rar = &ixgbe_clear_rar_generic, .set_vmdq = &ixgbe_set_vmdq_82598, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index beae7e012609..29771fbaa42d 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -68,8 +68,6 @@ s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); -s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index); -s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); @@ -991,40 +989,6 @@ s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) } /** - * ixgbe_blink_led_start_82599 - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array * @hw: pointer to hardware structure **/ @@ -1243,8 +1207,8 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_link_capabilities = &ixgbe_get_link_capabilities_82599, .led_on = &ixgbe_led_on_generic, .led_off = &ixgbe_led_off_generic, - .blink_led_start = &ixgbe_blink_led_start_82599, - .blink_led_stop = &ixgbe_blink_led_stop_82599, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, .set_rar = &ixgbe_set_rar_generic, .clear_rar = &ixgbe_clear_rar_generic, .set_vmdq = &ixgbe_set_vmdq_82599, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 63ab6671d08e..5567519676d5 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -2071,3 +2071,58 @@ s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) return 0; } + +/** + * ixgbe_blink_led_start_generic - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) +{ + ixgbe_link_speed speed = 0; + bool link_up = 0; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* + * Link must be up to auto-blink the LEDs; + * Force it if link is down. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + + if (!link_up) { + autoc_reg |= IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + msleep(10); + } + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + autoc_reg &= ~IXGBE_AUTOC_FLU; + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index 24f73e719c3f..dd260890ad0a 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -76,6 +76,9 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val); s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); + #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) #ifndef writeq diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index aafc120f164e..f0a20facc650 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -943,6 +943,24 @@ static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, } +static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_hw *hw = &adapter->hw; + int retval = 1; + + switch(hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + retval = 0; + break; + default: + wol->supported = 0; + retval = 0; + } + + return retval; +} + static void ixgbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) { @@ -952,7 +970,8 @@ static void ixgbe_get_wol(struct net_device *netdev, WAKE_BCAST | WAKE_MAGIC; wol->wolopts = 0; - if (!device_can_wakeup(&adapter->pdev->dev)) + if (ixgbe_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; if (adapter->wol & IXGBE_WUFC_EX) @@ -974,6 +993,9 @@ static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; + if (ixgbe_wol_exclusion(adapter, wol)) + return wol->wolopts ? -EOPNOTSUPP : 0; + adapter->wol = 0; if (wol->wolopts & WAKE_UCAST) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9ef128ae6458..febde45cf9fa 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2723,17 +2723,21 @@ static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) **/ static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) { - /* Start with base case */ - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - #ifdef CONFIG_IXGBE_DCB if (ixgbe_set_dcb_queues(adapter)) - return; + goto done; #endif if (ixgbe_set_rss_queues(adapter)) - return; + goto done; + + /* fallback to base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + +done: + /* Notify the stack of the (possibly) reduced Tx Queue count. */ + adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; } static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, @@ -2992,9 +2996,6 @@ try_msi: } out: - /* Notify the stack of the (possibly) reduced Tx Queue count. */ - adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; - return err; } @@ -3611,9 +3612,9 @@ static int ixgbe_resume(struct pci_dev *pdev) return 0; } - #endif /* CONFIG_PM */ -static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) + +static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) { struct net_device *netdev = pci_get_drvdata(pdev); struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -3672,18 +3673,46 @@ static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } + *enable_wake = !!wufc; + ixgbe_release_hw_control(adapter); pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +#ifdef CONFIG_PM +static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __ixgbe_shutdown(pdev, &wake); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } return 0; } +#endif /* CONFIG_PM */ static void ixgbe_shutdown(struct pci_dev *pdev) { - ixgbe_suspend(pdev, PMSG_SUSPEND); + bool wake; + + __ixgbe_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } } /** @@ -4342,7 +4371,7 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) int count = 0; unsigned int f; - r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping; + r_idx = skb->queue_mapping; tx_ring = &adapter->tx_ring[r_idx]; if (adapter->vlgrp && vlan_tx_tag_present(skb)) { diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c index 380a1a54d530..384e072de2e7 100644 --- a/drivers/net/mac89x0.c +++ b/drivers/net/mac89x0.c @@ -168,6 +168,17 @@ writereg(struct net_device *dev, int portno, int value) nubus_writew(swab16(value), dev->mem_start + portno); } +static const struct net_device_ops mac89x0_netdev_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* Probe for the CS8900 card in slot E. We won't bother looking anywhere else until we have a really good reason to do so. */ struct net_device * __init mac89x0_probe(int unit) @@ -280,12 +291,7 @@ struct net_device * __init mac89x0_probe(int unit) printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr); - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->get_stats = net_get_stats; - dev->set_multicast_list = &set_multicast_list; - dev->set_mac_address = &set_mac_address; + dev->netdev_ops = &mac89x0_netdev_ops; err = register_netdev(dev); if (err) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index f50501013b1c..46073de290cf 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -1100,6 +1100,18 @@ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return phy_mii_ioctl(phydev, if_mii(rq), cmd); } +static const struct net_device_ops macb_netdev_ops = { + .ndo_open = macb_open, + .ndo_stop = macb_close, + .ndo_start_xmit = macb_start_xmit, + .ndo_set_multicast_list = macb_set_rx_mode, + .ndo_get_stats = macb_get_stats, + .ndo_do_ioctl = macb_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init macb_probe(struct platform_device *pdev) { struct eth_platform_data *pdata; @@ -1175,12 +1187,7 @@ static int __init macb_probe(struct platform_device *pdev) goto err_out_iounmap; } - dev->open = macb_open; - dev->stop = macb_close; - dev->hard_start_xmit = macb_start_xmit; - dev->get_stats = macb_get_stats; - dev->set_multicast_list = macb_set_rx_mode; - dev->do_ioctl = macb_ioctl; + dev->netdev_ops = &macb_netdev_ops; netif_napi_add(dev, &bp->napi, macb_poll, 64); dev->ethtool_ops = &macb_ethtool_ops; diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 527166e35d56..acd143da161d 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -167,6 +167,18 @@ static int macsonic_close(struct net_device* dev) return err; } +static const struct net_device_ops macsonic_netdev_ops = { + .ndo_open = macsonic_open, + .ndo_stop = macsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_get_stats = sonic_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init macsonic_init(struct net_device *dev) { struct sonic_local* lp = netdev_priv(dev); @@ -198,12 +210,7 @@ static int __init macsonic_init(struct net_device *dev) lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS * SONIC_BUS_SCALE(lp->dma_bitmode)); - dev->open = macsonic_open; - dev->stop = macsonic_close; - dev->hard_start_xmit = sonic_send_packet; - dev->get_stats = sonic_get_stats; - dev->set_multicast_list = &sonic_multicast_list; - dev->tx_timeout = sonic_tx_timeout; + dev->netdev_ops = &macsonic_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; /* diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 9eed126a82f0..f2c4a665e93f 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2447,6 +2447,7 @@ static int myri10ge_open(struct net_device *dev) lro_mgr->lro_arr = ss->rx_done.lro_desc; lro_mgr->get_frag_header = myri10ge_get_frag_header; lro_mgr->max_aggr = myri10ge_lro_max_pkts; + lro_mgr->frag_align_pad = 2; if (lro_mgr->max_aggr > MAX_SKB_FRAGS) lro_mgr->max_aggr = MAX_SKB_FRAGS; diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index cf24cc34debe..e7070515d2e3 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -19,6 +19,7 @@ #include <linux/mii.h> #include <linux/phy.h> #include <linux/phy_fixed.h> +#include <linux/err.h> #define MII_REGS_NUM 29 @@ -207,8 +208,8 @@ static int __init fixed_mdio_bus_init(void) int ret; pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0); - if (!pdev) { - ret = -ENOMEM; + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); goto err_pdev; } diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index eb6411c4694f..7a3ec9d39a9a 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -69,6 +69,11 @@ #define MII_M1111_COPPER 0 #define MII_M1111_FIBER 1 +#define MII_88E1121_PHY_LED_CTRL 16 +#define MII_88E1121_PHY_LED_PAGE 3 +#define MII_88E1121_PHY_LED_DEF 0x0030 +#define MII_88E1121_PHY_PAGE 22 + #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 #define MII_M1011_PHY_STATUS_100 0x4000 @@ -154,6 +159,30 @@ static int marvell_config_aneg(struct phy_device *phydev) return err; } +static int m88e1121_config_aneg(struct phy_device *phydev) +{ + int err, temp; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + temp = phy_read(phydev, MII_88E1121_PHY_PAGE); + + phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); + phy_write(phydev, MII_88E1121_PHY_PAGE, temp); + + err = genphy_config_aneg(phydev); + + return err; +} + static int m88e1111_config_init(struct phy_device *phydev) { int err; @@ -429,6 +458,18 @@ static int marvell_read_status(struct phy_device *phydev) return 0; } +static int m88e1121_did_interrupt(struct phy_device *phydev) +{ + int imask; + + imask = phy_read(phydev, MII_M1011_IEVENT); + + if (imask & MII_M1011_IMASK_INIT) + return 1; + + return 0; +} + static struct phy_driver marvell_drivers[] = { { .phy_id = 0x01410c60, @@ -482,6 +523,19 @@ static struct phy_driver marvell_drivers[] = { .driver = {.owner = THIS_MODULE,}, }, { + .phy_id = 0x01410cb0, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1121R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &m88e1121_config_aneg, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, + .driver = { .owner = THIS_MODULE }, + }, + { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, .name = "Marvell 88E1145", diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 3ff1f425f1bb..61755cbd978e 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -434,7 +434,7 @@ void phy_start_machine(struct phy_device *phydev, phydev->adjust_state = handler; INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine); - schedule_delayed_work(&phydev->state_queue, jiffies + HZ); + schedule_delayed_work(&phydev->state_queue, HZ); } /** @@ -655,6 +655,10 @@ static void phy_change(struct work_struct *work) struct phy_device *phydev = container_of(work, struct phy_device, phy_queue); + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + goto ignore; + err = phy_disable_interrupts(phydev); if (err) @@ -681,6 +685,11 @@ static void phy_change(struct work_struct *work) return; +ignore: + atomic_dec(&phydev->irq_disable); + enable_irq(phydev->irq); + return; + irq_enable_err: disable_irq(phydev->irq); atomic_inc(&phydev->irq_disable); @@ -937,6 +946,5 @@ static void phy_state_machine(struct work_struct *work) if (err < 0) phy_error(phydev); - schedule_delayed_work(&phydev->state_queue, - jiffies + PHY_STATE_TIME * HZ); + schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ); } diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index dee23b159df2..7269a426051c 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -448,9 +448,6 @@ static void efx_init_channels(struct efx_nic *efx) WARN_ON(channel->rx_pkt != NULL); efx_rx_strategy(channel); - - netif_napi_add(channel->napi_dev, &channel->napi_str, - efx_poll, napi_weight); } } @@ -1321,6 +1318,8 @@ static int efx_init_napi(struct efx_nic *efx) efx_for_each_channel(channel, efx) { channel->napi_dev = efx->net_dev; + netif_napi_add(channel->napi_dev, &channel->napi_str, + efx_poll, napi_weight); } return 0; } @@ -1330,6 +1329,8 @@ static void efx_fini_napi(struct efx_nic *efx) struct efx_channel *channel; efx_for_each_channel(channel, efx) { + if (channel->napi_dev) + netif_napi_del(&channel->napi_str); channel->napi_dev = NULL; } } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d4629ab2c614..466a8abb0053 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1176,9 +1176,9 @@ void falcon_sim_phy_event(struct efx_nic *efx) EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE); if (EFX_IS10G(efx)) - EFX_SET_OWORD_FIELD(phy_event, XG_PHY_INTR, 1); + EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1); else - EFX_SET_OWORD_FIELD(phy_event, G_PHY0_INTR, 1); + EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1); falcon_generate_event(&efx->channel[0], &phy_event); } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 7b1882765a0c..3ab28bb00c12 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1188,6 +1188,19 @@ out: return ret; } +static const struct net_device_ops sh_eth_netdev_ops = { + .ndo_open = sh_eth_open, + .ndo_stop = sh_eth_close, + .ndo_start_xmit = sh_eth_start_xmit, + .ndo_get_stats = sh_eth_get_stats, + .ndo_set_multicast_list = sh_eth_set_multicast_list, + .ndo_tx_timeout = sh_eth_tx_timeout, + .ndo_do_ioctl = sh_eth_do_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int sh_eth_drv_probe(struct platform_device *pdev) { int ret, i, devno = 0; @@ -1240,13 +1253,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) mdp->edmac_endian = pd->edmac_endian; /* set function */ - ndev->open = sh_eth_open; - ndev->hard_start_xmit = sh_eth_start_xmit; - ndev->stop = sh_eth_close; - ndev->get_stats = sh_eth_get_stats; - ndev->set_multicast_list = sh_eth_set_multicast_list; - ndev->do_ioctl = sh_eth_do_ioctl; - ndev->tx_timeout = sh_eth_tx_timeout; + ndev->netdev_ops = &sh_eth_netdev_ops; ndev->watchdog_timeo = TX_TIMEOUT; mdp->post_rx = POST_RX >> (devno << 1); diff --git a/drivers/net/skge.c b/drivers/net/skge.c index b8978d4af1b7..c11cdd08ec57 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2674,7 +2674,7 @@ static int skge_down(struct net_device *dev) if (netif_msg_ifdown(skge)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); - netif_stop_queue(dev); + netif_tx_disable(dev); if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC) del_timer_sync(&skge->link_timer); @@ -2881,7 +2881,6 @@ static void skge_tx_clean(struct net_device *dev) } skge->tx_ring.to_clean = e; - netif_wake_queue(dev); } static void skge_tx_timeout(struct net_device *dev) @@ -2893,6 +2892,7 @@ static void skge_tx_timeout(struct net_device *dev) skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP); skge_tx_clean(dev); + netif_wake_queue(dev); } static int skge_change_mtu(struct net_device *dev, int new_mtu) diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c index e0d84772771c..a39c0b9ba8b6 100644 --- a/drivers/net/sun3_82586.c +++ b/drivers/net/sun3_82586.c @@ -331,6 +331,18 @@ out: return ERR_PTR(err); } +static const struct net_device_ops sun3_82586_netdev_ops = { + .ndo_open = sun3_82586_open, + .ndo_stop = sun3_82586_close, + .ndo_start_xmit = sun3_82586_send_packet, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = sun3_82586_timeout, + .ndo_get_stats = sun3_82586_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr) { int i, size, retval; @@ -381,13 +393,8 @@ static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr) printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq); - dev->open = sun3_82586_open; - dev->stop = sun3_82586_close; - dev->get_stats = sun3_82586_get_stats; - dev->tx_timeout = sun3_82586_timeout; + dev->netdev_ops = &sun3_82586_netdev_ops; dev->watchdog_timeo = HZ/20; - dev->hard_start_xmit = sun3_82586_send_packet; - dev->set_multicast_list = set_multicast_list; dev->if_port = 0; return 0; diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index d91e95b237b7..0ce2db6ce2bf 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -862,6 +862,22 @@ static int __devinit tc35815_init_dev_addr(struct net_device *dev) return 0; } +static const struct net_device_ops tc35815_netdev_ops = { + .ndo_open = tc35815_open, + .ndo_stop = tc35815_close, + .ndo_start_xmit = tc35815_send_packet, + .ndo_get_stats = tc35815_get_stats, + .ndo_set_multicast_list = tc35815_set_multicast_list, + .ndo_tx_timeout = tc35815_tx_timeout, + .ndo_do_ioctl = tc35815_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tc35815_poll_controller, +#endif +}; + static int __devinit tc35815_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -904,21 +920,12 @@ static int __devinit tc35815_init_one(struct pci_dev *pdev, ioaddr = pcim_iomap_table(pdev)[1]; /* Initialize the device structure. */ - dev->open = tc35815_open; - dev->hard_start_xmit = tc35815_send_packet; - dev->stop = tc35815_close; - dev->get_stats = tc35815_get_stats; - dev->set_multicast_list = tc35815_set_multicast_list; - dev->do_ioctl = tc35815_ioctl; + dev->netdev_ops = &tc35815_netdev_ops; dev->ethtool_ops = &tc35815_ethtool_ops; - dev->tx_timeout = tc35815_tx_timeout; dev->watchdog_timeo = TC35815_TX_TIMEOUT; #ifdef TC35815_NAPI netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT); #endif -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = tc35815_poll_controller; -#endif dev->irq = pdev->irq; dev->base_addr = (unsigned long)ioaddr; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6a736dda3ee2..7a837c465960 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12443,8 +12443,13 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) /* Next, try NVRAM. */ if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) && !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) { - memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); - memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); + dev->dev_addr[0] = ((hi >> 16) & 0xff); + dev->dev_addr[1] = ((hi >> 24) & 0xff); + dev->dev_addr[2] = ((lo >> 0) & 0xff); + dev->dev_addr[3] = ((lo >> 8) & 0xff); + dev->dev_addr[4] = ((lo >> 16) & 0xff); + dev->dev_addr[5] = ((lo >> 24) & 0xff); + } /* Finally just fetch it out of the MAC control regs. */ else { diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index bb43e7fb2a50..0f78f99f9b20 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1561,6 +1561,18 @@ static const struct ethtool_ops tsi108_ethtool_ops = { .set_settings = tsi108_set_settings, }; +static const struct net_device_ops tsi108_netdev_ops = { + .ndo_open = tsi108_open, + .ndo_stop = tsi108_close, + .ndo_start_xmit = tsi108_send_packet, + .ndo_set_multicast_list = tsi108_set_rx_mode, + .ndo_get_stats = tsi108_get_stats, + .ndo_do_ioctl = tsi108_do_ioctl, + .ndo_set_mac_address = tsi108_set_mac, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int tsi108_init_one(struct platform_device *pdev) { @@ -1616,14 +1628,8 @@ tsi108_init_one(struct platform_device *pdev) data->phy_type = einfo->phy_type; data->irq_num = einfo->irq_num; data->id = pdev->id; - dev->open = tsi108_open; - dev->stop = tsi108_close; - dev->hard_start_xmit = tsi108_send_packet; - dev->set_mac_address = tsi108_set_mac; - dev->set_multicast_list = tsi108_set_rx_mode; - dev->get_stats = tsi108_get_stats; netif_napi_add(dev, &data->napi, tsi108_poll, 64); - dev->do_ioctl = tsi108_do_ioctl; + dev->netdev_ops = &tsi108_netdev_ops; dev->ethtool_ops = &tsi108_ethtool_ops; /* Apparently, the Linux networking code won't use scatter-gather diff --git a/drivers/net/tun.c b/drivers/net/tun.c index a1b0697340ba..16716aef184c 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -518,7 +518,7 @@ static inline struct sk_buff *tun_alloc_skb(struct tun_struct *tun, int err; /* Under a page? Don't bother with paged skb. */ - if (prepad + len < PAGE_SIZE) + if (prepad + len < PAGE_SIZE || !linear) linear = len; skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock, @@ -565,7 +565,8 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) { align = NET_IP_ALIGN; - if (unlikely(len < ETH_HLEN)) + if (unlikely(len < ETH_HLEN || + (gso.hdr_len && gso.hdr_len < ETH_HLEN))) return -EINVAL; } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index fb53ef872df3..754a4b182c1d 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -377,7 +377,7 @@ static void velocity_print_info(struct velocity_info *vptr); static int velocity_open(struct net_device *dev); static int velocity_change_mtu(struct net_device *dev, int mtu); static int velocity_xmit(struct sk_buff *skb, struct net_device *dev); -static int velocity_intr(int irq, void *dev_instance); +static irqreturn_t velocity_intr(int irq, void *dev_instance); static void velocity_set_multi(struct net_device *dev); static struct net_device_stats *velocity_get_stats(struct net_device *dev); static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); @@ -2215,7 +2215,7 @@ out: * efficiently as possible. */ -static int velocity_intr(int irq, void *dev_instance) +static irqreturn_t velocity_intr(int irq, void *dev_instance) { struct net_device *dev = dev_instance; struct velocity_info *vptr = netdev_priv(dev); diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c index a12a7211c982..5a4ad156f63e 100644 --- a/drivers/net/xtsonic.c +++ b/drivers/net/xtsonic.c @@ -108,6 +108,18 @@ static int xtsonic_close(struct net_device *dev) return err; } +static const struct net_device_ops xtsonic_netdev_ops = { + .ndo_open = xtsonic_open, + .ndo_stop = xtsonic_close, + .ndo_start_xmit = sonic_send_packet, + .ndo_get_stats = sonic_get_stats, + .ndo_set_multicast_list = sonic_multicast_list, + .ndo_tx_timeout = sonic_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + static int __init sonic_probe1(struct net_device *dev) { static unsigned version_printed = 0; @@ -205,12 +217,7 @@ static int __init sonic_probe1(struct net_device *dev) lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS * SONIC_BUS_SCALE(lp->dma_bitmode)); - dev->open = xtsonic_open; - dev->stop = xtsonic_close; - dev->hard_start_xmit = sonic_send_packet; - dev->get_stats = sonic_get_stats; - dev->set_multicast_list = &sonic_multicast_list; - dev->tx_timeout = sonic_tx_timeout; + dev->netdev_ops = &xtsonic_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; /* diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 0570794ccf1c..d1815272c435 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -20,6 +20,7 @@ #include <linux/slab.h> #include <linux/buffer_head.h> #include <linux/hdreg.h> +#include <linux/async.h> #include <asm/ccwdev.h> #include <asm/ebcdic.h> @@ -480,8 +481,10 @@ static void dasd_change_state(struct dasd_device *device) if (rc && rc != -EAGAIN) device->target = device->state; - if (device->state == device->target) + if (device->state == device->target) { wake_up(&dasd_init_waitq); + dasd_put_device(device); + } /* let user-space know that the device status changed */ kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE); @@ -513,12 +516,15 @@ void dasd_kick_device(struct dasd_device *device) */ void dasd_set_target_state(struct dasd_device *device, int target) { + dasd_get_device(device); /* If we are in probeonly mode stop at DASD_STATE_READY. */ if (dasd_probeonly && target > DASD_STATE_READY) target = DASD_STATE_READY; if (device->target != target) { - if (device->state == target) + if (device->state == target) { wake_up(&dasd_init_waitq); + dasd_put_device(device); + } device->target = target; } if (device->state != device->target) @@ -2148,6 +2154,22 @@ dasd_exit(void) * SECTION: common functions for ccw_driver use */ +static void dasd_generic_auto_online(void *data, async_cookie_t cookie) +{ + struct ccw_device *cdev = data; + int ret; + + ret = ccw_device_set_online(cdev); + if (ret) + pr_warning("%s: Setting the DASD online failed with rc=%d\n", + dev_name(&cdev->dev), ret); + else { + struct dasd_device *device = dasd_device_from_cdev(cdev); + wait_event(dasd_init_waitq, _wait_for_device(device)); + dasd_put_device(device); + } +} + /* * Initial attempt at a probe function. this can be simplified once * the other detection code is gone. @@ -2180,10 +2202,7 @@ int dasd_generic_probe(struct ccw_device *cdev, */ if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) || (dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0)) - ret = ccw_device_set_online(cdev); - if (ret) - pr_warning("%s: Setting the DASD online failed with rc=%d\n", - dev_name(&cdev->dev), ret); + async_schedule(dasd_generic_auto_online, cdev); return 0; } @@ -2290,13 +2309,7 @@ int dasd_generic_set_online(struct ccw_device *cdev, } else pr_debug("dasd_generic device %s found\n", dev_name(&cdev->dev)); - - /* FIXME: we have to wait for the root device but we don't want - * to wait for each single device but for all at once. */ - wait_event(dasd_init_waitq, _wait_for_device(device)); - dasd_put_device(device); - return rc; } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 21254793c604..cb52da033f06 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -2019,15 +2019,23 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track( ccw++; recid += count; new_track = 0; + /* first idaw for a ccw may start anywhere */ + if (!idaw_dst) + idaw_dst = dst; } - /* If we start a new idaw, everything is fine and the - * start of the new idaw is the start of this segment. + /* If we start a new idaw, we must make sure that it + * starts on an IDA_BLOCK_SIZE boundary. * If we continue an idaw, we must make sure that the * current segment begins where the so far accumulated * idaw ends */ - if (!idaw_dst) - idaw_dst = dst; + if (!idaw_dst) { + if (__pa(dst) & (IDA_BLOCK_SIZE-1)) { + dasd_sfree_request(cqr, startdev); + return ERR_PTR(-ERANGE); + } else + idaw_dst = dst; + } if ((idaw_dst + idaw_len) != dst) { dasd_sfree_request(cqr, startdev); return ERR_PTR(-ERANGE); diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 9e8a2914259b..accd957454e7 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -881,42 +881,6 @@ no_handler: qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); } -static void qdio_call_shutdown(struct work_struct *work) -{ - struct ccw_device_private *priv; - struct ccw_device *cdev; - - priv = container_of(work, struct ccw_device_private, kick_work); - cdev = priv->cdev; - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - put_device(&cdev->dev); -} - -static void qdio_int_error(struct ccw_device *cdev) -{ - struct qdio_irq *irq_ptr = cdev->private->qdio_data; - - switch (irq_ptr->state) { - case QDIO_IRQ_STATE_INACTIVE: - case QDIO_IRQ_STATE_CLEANUP: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - break; - case QDIO_IRQ_STATE_ESTABLISHED: - case QDIO_IRQ_STATE_ACTIVE: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); - if (get_device(&cdev->dev)) { - /* Can't call shutdown from interrupt context. */ - PREPARE_WORK(&cdev->private->kick_work, - qdio_call_shutdown); - queue_work(ccw_device_work, &cdev->private->kick_work); - } - break; - default: - WARN_ON(1); - } - wake_up(&cdev->private->wait_q); -} - static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat, int dstat) { @@ -973,10 +937,8 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, switch (PTR_ERR(irb)) { case -EIO: DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no); - return; - case -ETIMEDOUT: - DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no); - qdio_int_error(cdev); + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + wake_up(&cdev->private->wait_q); return; default: WARN_ON(1); @@ -1001,7 +963,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case QDIO_IRQ_STATE_ACTIVE: if (cstat & SCHN_STAT_PCI) { qdio_int_handler_pci(irq_ptr); - /* no state change so no need to wake up wait_q */ return; } if ((cstat & ~SCHN_STAT_PCI) || dstat) { diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index e6d1fc8c54f1..a85ad05e8548 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -383,18 +383,22 @@ static int jsf_ioctl_program(void __user *arg) return 0; } -static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd, - unsigned long arg) +static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg) { + lock_kernel(); int error = -ENOTTY; void __user *argp = (void __user *)arg; - if (!capable(CAP_SYS_ADMIN)) + if (!capable(CAP_SYS_ADMIN)) { + unlock_kernel(); return -EPERM; + } switch (cmd) { case JSFLASH_IDENT: - if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) + if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) { + unlock_kernel(); return -EFAULT; + } break; case JSFLASH_ERASE: error = jsf_ioctl_erase(arg); @@ -404,6 +408,7 @@ static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd, break; } + unlock_kernel(); return error; } @@ -439,7 +444,7 @@ static const struct file_operations jsf_fops = { .llseek = jsf_lseek, .read = jsf_read, .write = jsf_write, - .ioctl = jsf_ioctl, + .unlocked_ioctl = jsf_ioctl, .mmap = jsf_mmap, .open = jsf_open, .release = jsf_release, diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 27993c37775d..2c56fd56ec63 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -197,9 +197,8 @@ static struct uctrl_driver { static void uctrl_get_event_status(struct uctrl_driver *); static void uctrl_get_external_status(struct uctrl_driver *); -static int -uctrl_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long +uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { switch (cmd) { default: @@ -226,7 +225,7 @@ static irqreturn_t uctrl_interrupt(int irq, void *dev_id) static const struct file_operations uctrl_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = uctrl_ioctl, + .unlocked_ioctl = uctrl_ioctl, .open = uctrl_open, }; diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 41ac94872b8d..e06686ae858b 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (tx_enabled(port)) { - disable_irq(ourport->tx_irq); + disable_irq_nosync(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(ourport->rx_irq); + disable_irq_nosync(ourport->rx_irq); rx_enabled(port) = 0; } } diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index c1688c71f052..c76feea5fe25 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -195,7 +195,7 @@ static void cs_deassert(struct driver_data *drv_data) struct chip_data *chip = drv_data->cur_chip; if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_ASSERT); + chip->cs_control(PXA2XX_CS_DEASSERT); return; } diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 79e90fed27d3..299d29d1dadb 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -41,6 +41,8 @@ static int binder_last_id; static struct proc_dir_entry *binder_proc_dir_entry_root; static struct proc_dir_entry *binder_proc_dir_entry_proc; static struct hlist_head binder_dead_nodes; +static HLIST_HEAD(binder_deferred_list); +static DEFINE_MUTEX(binder_deferred_lock); static int binder_read_proc_proc( char *page, char **start, off_t off, int count, int *eof, void *data); @@ -54,11 +56,7 @@ static int binder_read_proc_proc( #define SZ_4M 0x400000 #endif -#ifndef __i386__ -#define FORBIDDEN_MMAP_FLAGS (VM_WRITE | VM_EXEC) -#else #define FORBIDDEN_MMAP_FLAGS (VM_WRITE) -#endif #define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64) @@ -236,6 +234,12 @@ struct binder_buffer { uint8_t data[0]; }; +enum { + BINDER_DEFERRED_PUT_FILES = 0x01, + BINDER_DEFERRED_FLUSH = 0x02, + BINDER_DEFERRED_RELEASE = 0x04, +}; + struct binder_proc { struct hlist_node proc_node; struct rb_root threads; @@ -245,8 +249,11 @@ struct binder_proc { int pid; struct vm_area_struct *vma; struct task_struct *tsk; + struct files_struct *files; + struct hlist_node deferred_work_node; + int deferred_work; void *buffer; - size_t user_buffer_offset; + ptrdiff_t user_buffer_offset; struct list_head buffers; struct rb_root free_buffers; @@ -310,12 +317,14 @@ struct binder_transaction { uid_t sender_euid; }; +static void binder_defer_work(struct binder_proc *proc, int defer); + /* * copied from get_unused_fd_flags */ -int task_get_unused_fd_flags(struct task_struct *tsk, int flags) +int task_get_unused_fd_flags(struct binder_proc *proc, int flags) { - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; int fd, error; struct fdtable *fdt; unsigned long rlim_cur; @@ -337,9 +346,9 @@ repeat: * will limit the total number of files that can be opened. */ rlim_cur = 0; - if (lock_task_sighand(tsk, &irqs)) { - rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - unlock_task_sighand(tsk, &irqs); + if (lock_task_sighand(proc->tsk, &irqs)) { + rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; + unlock_task_sighand(proc->tsk, &irqs); } if (fd >= rlim_cur) goto out; @@ -375,7 +384,6 @@ repeat: out: spin_unlock(&files->file_lock); - put_files_struct(files); return error; } @@ -383,9 +391,9 @@ out: * copied from fd_install */ static void task_fd_install( - struct task_struct *tsk, unsigned int fd, struct file *file) + struct binder_proc *proc, unsigned int fd, struct file *file) { - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; struct fdtable *fdt; if (files == NULL) @@ -396,7 +404,6 @@ static void task_fd_install( BUG_ON(fdt->fd[fd] != NULL); rcu_assign_pointer(fdt->fd[fd], file); spin_unlock(&files->file_lock); - put_files_struct(files); } /* @@ -413,10 +420,10 @@ static void __put_unused_fd(struct files_struct *files, unsigned int fd) /* * copied from sys_close */ -static long task_close_fd(struct task_struct *tsk, unsigned int fd) +static long task_close_fd(struct binder_proc *proc, unsigned int fd) { struct file *filp; - struct files_struct *files = get_files_struct(tsk); + struct files_struct *files = proc->files; struct fdtable *fdt; int retval; @@ -443,12 +450,10 @@ static long task_close_fd(struct task_struct *tsk, unsigned int fd) retval == -ERESTART_RESTARTBLOCK)) retval = -EINTR; - put_files_struct(files); return retval; out_unlock: spin_unlock(&files->file_lock); - put_files_struct(files); return -EBADF; } @@ -618,7 +623,8 @@ static int binder_update_page_range(struct binder_proc *proc, int allocate, proc->pid, page_addr); goto err_map_kernel_failed; } - user_page_addr = (size_t)page_addr + proc->user_buffer_offset; + user_page_addr = + (uintptr_t)page_addr + proc->user_buffer_offset; ret = vm_insert_page(vma, user_page_addr, page[0]); if (ret) { printk(KERN_ERR "binder: %d: binder_alloc_buf failed " @@ -639,7 +645,7 @@ free_range: page_addr -= PAGE_SIZE) { page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE]; if (vma) - zap_page_range(vma, (size_t)page_addr + + zap_page_range(vma, (uintptr_t)page_addr + proc->user_buffer_offset, PAGE_SIZE, NULL); err_vm_insert_page_failed: unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE); @@ -720,18 +726,19 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc, "er %p size %zd\n", proc->pid, size, buffer, buffer_size); has_page_addr = - (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK); + (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK); if (n == NULL) { if (size + sizeof(struct binder_buffer) + 4 >= buffer_size) buffer_size = size; /* no room for other buffers */ else buffer_size = size + sizeof(struct binder_buffer); } - end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size); + end_page_addr = + (void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size); if (end_page_addr > has_page_addr) end_page_addr = has_page_addr; if (binder_update_page_range(proc, 1, - (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL)) + (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL)) return NULL; rb_erase(best_fit, &proc->free_buffers); @@ -762,12 +769,12 @@ static struct binder_buffer *binder_alloc_buf(struct binder_proc *proc, static void *buffer_start_page(struct binder_buffer *buffer) { - return (void *)((size_t)buffer & PAGE_MASK); + return (void *)((uintptr_t)buffer & PAGE_MASK); } static void *buffer_end_page(struct binder_buffer *buffer) { - return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK); + return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK); } static void binder_delete_free_buffer( @@ -845,8 +852,8 @@ static void binder_free_buf( } binder_update_page_range(proc, 0, - (void *)PAGE_ALIGN((size_t)buffer->data), - (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK), + (void *)PAGE_ALIGN((uintptr_t)buffer->data), + (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK), NULL); rb_erase(&buffer->rb_node, &proc->allocated_buffers); buffer->free = 1; @@ -1345,6 +1352,17 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) { struct binder_transaction *tmp; tmp = thread->transaction_stack; + if (tmp->to_thread != thread) { + binder_user_error("binder: %d:%d got new " + "transaction with bad transaction stack" + ", transaction %d has target %d:%d\n", + proc->pid, thread->pid, tmp->debug_id, + tmp->to_proc ? tmp->to_proc->pid : 0, + tmp->to_thread ? + tmp->to_thread->pid : 0); + return_error = BR_FAILED_REPLY; + goto err_bad_call_stack; + } while (tmp) { if (tmp->from && tmp->from->proc == target_proc) target_thread = tmp->from; @@ -1434,10 +1452,19 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, return_error = BR_FAILED_REPLY; goto err_copy_data_failed; } + if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) { + binder_user_error("binder: %d:%d got transaction with " + "invalid offsets size, %zd\n", + proc->pid, thread->pid, tr->offsets_size); + return_error = BR_FAILED_REPLY; + goto err_bad_offset; + } off_end = (void *)offp + tr->offsets_size; for (; offp < off_end; offp++) { struct flat_binder_object *fp; - if (*offp > t->buffer->data_size - sizeof(*fp)) { + if (*offp > t->buffer->data_size - sizeof(*fp) || + t->buffer->data_size < sizeof(*fp) || + !IS_ALIGNED(*offp, sizeof(void *))) { binder_user_error("binder: %d:%d got transaction with " "invalid offset, %zd\n", proc->pid, thread->pid, *offp); @@ -1544,13 +1571,13 @@ binder_transaction(struct binder_proc *proc, struct binder_thread *thread, return_error = BR_FAILED_REPLY; goto err_fget_failed; } - target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC); + target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC); if (target_fd < 0) { fput(file); return_error = BR_FAILED_REPLY; goto err_get_unused_fd_failed; } - task_fd_install(target_proc->tsk, target_fd, file); + task_fd_install(target_proc, target_fd, file); if (binder_debug_mask & BINDER_DEBUG_TRANSACTION) printk(KERN_INFO " fd %ld -> %d\n", fp->handle, target_fd); /* TODO: fput? */ @@ -1655,7 +1682,9 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer off_end = (void *)offp + buffer->offsets_size; for (; offp < off_end; offp++) { struct flat_binder_object *fp; - if (*offp > buffer->data_size - sizeof(*fp)) { + if (*offp > buffer->data_size - sizeof(*fp) || + buffer->data_size < sizeof(*fp) || + !IS_ALIGNED(*offp, sizeof(void *))) { printk(KERN_ERR "binder: transaction release %d bad" "offset %zd, size %zd\n", debug_id, *offp, buffer->data_size); continue; @@ -1691,7 +1720,7 @@ binder_transaction_buffer_release(struct binder_proc *proc, struct binder_buffer if (binder_debug_mask & BINDER_DEBUG_TRANSACTION) printk(KERN_INFO " fd %ld\n", fp->handle); if (failed_at) - task_close_fd(proc->tsk, fp->handle); + task_close_fd(proc, fp->handle); break; default: @@ -2340,7 +2369,7 @@ retry: tr.data_size = t->buffer->data_size; tr.offsets_size = t->buffer->offsets_size; - tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset); + tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset; tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *)); if (put_user(cmd, (uint32_t __user *)ptr)) @@ -2656,6 +2685,7 @@ static void binder_vma_open(struct vm_area_struct *vma) (unsigned long)pgprot_val(vma->vm_page_prot)); dump_stack(); } + static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; @@ -2666,6 +2696,7 @@ static void binder_vma_close(struct vm_area_struct *vma) (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, (unsigned long)pgprot_val(vma->vm_page_prot)); proc->vma = NULL; + binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES); } static struct vm_operations_struct binder_vm_ops = { @@ -2698,6 +2729,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) } vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE; + if (proc->buffer) { + ret = -EBUSY; + failure_string = "already mapped"; + goto err_already_mapped; + } + area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP); if (area == NULL) { ret = -ENOMEM; @@ -2705,7 +2742,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) goto err_get_vm_area_failed; } proc->buffer = area->addr; - proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer; + proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer; #ifdef CONFIG_CPU_CACHE_VIPT if (cache_is_vipt_aliasing()) { @@ -2738,6 +2775,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) binder_insert_free_buffer(proc, buffer); proc->free_async_space = proc->buffer_size / 2; barrier(); + proc->files = get_files_struct(current); proc->vma = vma; /*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/ @@ -2745,10 +2783,12 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) err_alloc_small_buf_failed: kfree(proc->pages); + proc->pages = NULL; err_alloc_pages_failed: vfree(proc->buffer); + proc->buffer = NULL; err_get_vm_area_failed: - mutex_unlock(&binder_lock); +err_already_mapped: err_bad_arg: printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret); return ret; @@ -2780,6 +2820,7 @@ static int binder_open(struct inode *nodp, struct file *filp) if (binder_proc_dir_entry_proc) { char strbuf[11]; snprintf(strbuf, sizeof(strbuf), "%u", proc->pid); + remove_proc_entry(strbuf, binder_proc_dir_entry_proc); create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc); } @@ -2788,11 +2829,17 @@ static int binder_open(struct inode *nodp, struct file *filp) static int binder_flush(struct file *filp, fl_owner_t id) { - struct rb_node *n; struct binder_proc *proc = filp->private_data; - int wake_count = 0; - mutex_lock(&binder_lock); + binder_defer_work(proc, BINDER_DEFERRED_FLUSH); + + return 0; +} + +static void binder_deferred_flush(struct binder_proc *proc) +{ + struct rb_node *n; + int wake_count = 0; for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) { struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node); thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN; @@ -2802,28 +2849,35 @@ static int binder_flush(struct file *filp, fl_owner_t id) } } wake_up_interruptible_all(&proc->wait); - mutex_unlock(&binder_lock); if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count); - - return 0; } static int binder_release(struct inode *nodp, struct file *filp) { - struct hlist_node *pos; - struct binder_transaction *t; - struct rb_node *n; struct binder_proc *proc = filp->private_data; - int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count; - if (binder_proc_dir_entry_proc) { char strbuf[11]; snprintf(strbuf, sizeof(strbuf), "%u", proc->pid); remove_proc_entry(strbuf, binder_proc_dir_entry_proc); } - mutex_lock(&binder_lock); + + binder_defer_work(proc, BINDER_DEFERRED_RELEASE); + + return 0; +} + +static void binder_deferred_release(struct binder_proc *proc) +{ + struct hlist_node *pos; + struct binder_transaction *t; + struct rb_node *n; + int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count; + + BUG_ON(proc->vma); + BUG_ON(proc->files); + hlist_del(&proc->proc_node); if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) { if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER) @@ -2897,7 +2951,6 @@ static int binder_release(struct inode *nodp, struct file *filp) } binder_stats.obj_deleted[BINDER_STAT_PROC]++; - mutex_unlock(&binder_lock); page_count = 0; if (proc->pages) { @@ -2921,7 +2974,57 @@ static int binder_release(struct inode *nodp, struct file *filp) proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count); kfree(proc); - return 0; +} + +static void binder_deferred_func(struct work_struct *work) +{ + struct binder_proc *proc; + struct files_struct *files; + + int defer; + do { + mutex_lock(&binder_lock); + mutex_lock(&binder_deferred_lock); + if (!hlist_empty(&binder_deferred_list)) { + proc = hlist_entry(binder_deferred_list.first, + struct binder_proc, deferred_work_node); + hlist_del_init(&proc->deferred_work_node); + defer = proc->deferred_work; + proc->deferred_work = 0; + } else { + proc = NULL; + defer = 0; + } + mutex_unlock(&binder_deferred_lock); + + files = NULL; + if (defer & BINDER_DEFERRED_PUT_FILES) + if ((files = proc->files)) + proc->files = NULL; + + if (defer & BINDER_DEFERRED_FLUSH) + binder_deferred_flush(proc); + + if (defer & BINDER_DEFERRED_RELEASE) + binder_deferred_release(proc); /* frees proc */ + + mutex_unlock(&binder_lock); + if (files) + put_files_struct(files); + } while (proc); +} +static DECLARE_WORK(binder_deferred_work, binder_deferred_func); + +static void binder_defer_work(struct binder_proc *proc, int defer) +{ + mutex_lock(&binder_deferred_lock); + proc->deferred_work |= defer; + if (hlist_unhashed(&proc->deferred_work_node)) { + hlist_add_head(&proc->deferred_work_node, + &binder_deferred_list); + schedule_work(&binder_deferred_work); + } + mutex_unlock(&binder_deferred_lock); } static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t) diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 6f6e36a3bd9f..c8af9a868d62 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -5259,6 +5259,18 @@ static int at76_alloc_urbs(struct at76_priv *priv, return 0; } +static const struct net_device_ops at76_netdev_ops = { + .ndo_open = at76_open, + .ndo_stop = at76_stop, + .ndo_get_stats = at76_get_stats, + .ndo_start_xmit = at76_tx, + .ndo_tx_timeout = at76_tx_timeout, + .ndo_set_multicast_list = at76_set_multicast, + .ndo_set_mac_address = at76_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* Register network device and initialize the hardware */ static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) @@ -5303,21 +5315,15 @@ static int at76_init_new_device(struct at76_priv *priv, priv->scan_mode = SCAN_TYPE_ACTIVE; netdev->flags &= ~IFF_MULTICAST; /* not yet or never */ - netdev->open = at76_open; - netdev->stop = at76_stop; - netdev->get_stats = at76_get_stats; + netdev->netdev_ops = &at76_netdev_ops; netdev->ethtool_ops = &at76_ethtool_ops; /* Add pointers to enable iwspy support. */ priv->wireless_data.spy_data = &priv->spy_data; netdev->wireless_data = &priv->wireless_data; - netdev->hard_start_xmit = at76_tx; - netdev->tx_timeout = at76_tx_timeout; netdev->watchdog_timeo = 2 * HZ; netdev->wireless_handlers = &at76_handler_def; - netdev->set_multicast_list = at76_set_multicast; - netdev->set_mac_address = at76_set_mac_address; dev_alloc_name(netdev, "wlan%d"); ret = register_netdev(priv->netdev); diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c index 21206c4d22ff..077724a556cc 100644 --- a/drivers/staging/epl/VirtualEthernetLinux.c +++ b/drivers/staging/epl/VirtualEthernetLinux.c @@ -284,6 +284,17 @@ static tEplKernel VEthRecvFrame(tEplFrameInfo * pFrameInfo_p) return Ret; } +static const struct net_device_ops epl_netdev_ops = { + .ndo_open = VEthOpen, + .ndo_stop = VEthClose, + .ndo_get_stats = VEthGetStats, + .ndo_start_xmit = VEthXmit, + .ndo_tx_timeout = VEthTimeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p) { tEplKernel Ret = kEplSuccessful; @@ -299,11 +310,7 @@ tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p) goto Exit; } - pVEthNetDevice_g->open = VEthOpen; - pVEthNetDevice_g->stop = VEthClose; - pVEthNetDevice_g->get_stats = VEthGetStats; - pVEthNetDevice_g->hard_start_xmit = VEthXmit; - pVEthNetDevice_g->tx_timeout = VEthTimeout; + pVEthNetDevice_g->netdev_ops = &epl_netdev_ops; pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT; pVEthNetDevice_g->destructor = free_netdev; diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index de65972ff362..951c73d5db20 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -112,6 +112,19 @@ void et131x_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); +static const struct net_device_ops et131x_netdev_ops = { + .ndo_open = et131x_open, + .ndo_stop = et131x_close, + .ndo_start_xmit = et131x_tx, + .ndo_set_multicast_list = et131x_multicast, + .ndo_tx_timeout = et131x_tx_timeout, + .ndo_change_mtu = et131x_change_mtu, + .ndo_set_mac_address = et131x_set_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_get_stats = et131x_stats, + .ndo_do_ioctl = et131x_ioctl, +}; + /** * et131x_device_alloc * @@ -142,16 +155,8 @@ struct net_device *et131x_device_alloc(void) */ //netdev->init = &et131x_init; //netdev->set_config = &et131x_config; - netdev->get_stats = &et131x_stats; - netdev->open = &et131x_open; - netdev->stop = &et131x_close; - netdev->do_ioctl = &et131x_ioctl; - netdev->set_multicast_list = &et131x_multicast; - netdev->hard_start_xmit = &et131x_tx; - netdev->tx_timeout = &et131x_tx_timeout; netdev->watchdog_timeo = ET131X_TX_TIMEOUT; - netdev->change_mtu = &et131x_change_mtu; - netdev->set_mac_address = &et131x_set_mac_addr; + netdev->netdev_ops = &et131x_netdev_ops; //netdev->ethtool_ops = &et131x_ethtool_ops; diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index 58bfc8d81b3b..f47c0ce2849a 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -268,21 +268,6 @@ int go7007_register_encoder(struct go7007 *go) init_i2c_module(&go->i2c_adapter, go->board_info->i2c_devs[i].id, go->board_info->i2c_devs[i].addr); -#ifdef TUNER_SET_TYPE_ADDR - if (go->tuner_type >= 0) { - struct tuner_setup tun_setup = { - .mode_mask = T_ANALOG_TV, - .addr = ADDR_UNSET, - .type = go->tuner_type - }; - i2c_clients_command(&go->i2c_adapter, - TUNER_SET_TYPE_ADDR, &tun_setup); - } -#else - if (go->tuner_type >= 0) - i2c_clients_command(&go->i2c_adapter, - TUNER_SET_TYPE, &go->tuner_type); -#endif if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) i2c_clients_command(&go->i2c_adapter, DECODER_SET_CHANNEL, &go->channel_number); diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c index 58fddb122372..0a7eeef7c008 100644 --- a/drivers/staging/go7007/wis-sony-tuner.c +++ b/drivers/staging/go7007/wis-sony-tuner.c @@ -386,6 +386,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct wis_sony_tuner *t = i2c_get_clientdata(client); switch (cmd) { +#if 0 #ifdef TUNER_SET_TYPE_ADDR case TUNER_SET_TYPE_ADDR: { @@ -463,6 +464,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) t->type, sony_tuners[t->type - 200].name); break; } +#endif case VIDIOC_G_FREQUENCY: { struct v4l2_frequency *f = arg; diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c index 3aa946899ced..e2ac8d60f8c2 100644 --- a/drivers/staging/line6/audio.c +++ b/drivers/staging/line6/audio.c @@ -27,11 +27,12 @@ int line6_init_audio(struct usb_line6 *line6) { static int dev; struct snd_card *card; + int err; - card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0); - - if (card == NULL) - return -ENOMEM; + err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0, + &card); + if (err < 0) + return err; line6->card = card; diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c index 565a839589f5..540cbbb826f9 100644 --- a/drivers/staging/otus/usbdrv.c +++ b/drivers/staging/otus/usbdrv.c @@ -822,6 +822,21 @@ int zfLnxVapXmitFrame(struct sk_buff *skb, struct net_device *dev) return 0; } +static const struct net_device_ops vap_netdev_ops = { + .ndo_open = zfLnxVapOpen, + .ndo_stop = zfLnxVapClose, + .ndo_start_xmit = zfLnxVapXmitFrame, + .ndo_get_stats = usbdrv_get_stats, + .ndo_change_mtu = usbdrv_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef ZM_HOSTAPD_SUPPORT + .ndo_do_ioctl = usbdrv_ioctl, +#else + .ndo_do_ioctl = NULL, +#endif +}; + int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId) { /* Allocate net device structure */ @@ -846,16 +861,7 @@ int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId) vap[vapId].dev->ml_priv = parentDev->ml_priv; //dev->hard_start_xmit = &zd1212_wds_xmit_frame; - vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame; - vap[vapId].dev->open = &zfLnxVapOpen; - vap[vapId].dev->stop = &zfLnxVapClose; - vap[vapId].dev->get_stats = &usbdrv_get_stats; - vap[vapId].dev->change_mtu = &usbdrv_change_mtu; -#ifdef ZM_HOSTAPD_SUPPORT - vap[vapId].dev->do_ioctl = usbdrv_ioctl; -#else - vap[vapId].dev->do_ioctl = NULL; -#endif + vap[vapId].dev->netdev_ops = &vap_netdev_ops; vap[vapId].dev->destructor = free_netdev; vap[vapId].dev->tx_queue_len = 0; @@ -1068,6 +1074,18 @@ void zfLnxUnlinkAllUrbs(struct usbdrv_private *macp) usb_unlink_urb(macp->RegInUrb); } +static const struct net_device_ops otus_netdev_ops = { + .ndo_open = usbdrv_open, + .ndo_stop = usbdrv_close, + .ndo_start_xmit = usbdrv_xmit_frame, + .ndo_change_mtu = usbdrv_change_mtu, + .ndo_get_stats = usbdrv_get_stats, + .ndo_set_multicast_list = usbdrv_set_multi, + .ndo_set_mac_address = usbdrv_set_mac, + .ndo_do_ioctl = usbdrv_ioctl, + .ndo_validate_addr = eth_validate_addr, +}; + u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp) { //unsigned char addr[6]; @@ -1092,14 +1110,7 @@ u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp) dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def; #endif - dev->open = usbdrv_open; - dev->hard_start_xmit = usbdrv_xmit_frame; - dev->stop = usbdrv_close; - dev->change_mtu = &usbdrv_change_mtu; - dev->get_stats = usbdrv_get_stats; - dev->set_multicast_list = usbdrv_set_multi; - dev->set_mac_address = usbdrv_set_mac; - dev->do_ioctl = usbdrv_ioctl; + dev->netdev_ops = &otus_netdev_ops; dev->flags |= IFF_MULTICAST; diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c index 78f1d2224fa1..2a6d937ba5e8 100644 --- a/drivers/staging/otus/zdusb.c +++ b/drivers/staging/otus/zdusb.c @@ -48,7 +48,8 @@ static const char driver_name[] = "Otus"; static struct usb_device_id zd1221_ids [] = { { USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) }, { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) }, - { USB_DEVICE(0x0846, 0x9010) }, + { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) }, + { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) }, { } /* Terminating entry */ }; diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h index 656dc212ade5..9f8ab2e96169 100644 --- a/drivers/staging/otus/zdusb.h +++ b/drivers/staging/otus/zdusb.h @@ -40,4 +40,8 @@ #define VENDOR_DLINK 0x07D1 //Dlink #define PRODUCT_DWA160A 0x3C10 +#define VENDOR_NETGEAR 0x0846 /* NetGear */ +#define PRODUCT_WNDA3100 0x9010 +#define PRODUCT_WN111v2 0x9001 + #endif diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c index 3e67da9ea381..a6eaa42fb669 100644 --- a/drivers/staging/pohmelfs/config.c +++ b/drivers/staging/pohmelfs/config.c @@ -81,6 +81,45 @@ static struct pohmelfs_config_group *pohmelfs_find_create_config_group(unsigned return g; } +static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst) +{ + struct pohmelfs_config *tmp; + + INIT_LIST_HEAD(&dst->config_entry); + + list_for_each_entry(tmp, &psb->state_list, config_entry) { + if (dst->state.ctl.prio > tmp->state.ctl.prio) + list_add_tail(&dst->config_entry, &tmp->config_entry); + } + if (list_empty(&dst->config_entry)) + list_add_tail(&dst->config_entry, &psb->state_list); +} + +static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb, + struct pohmelfs_config *dst, struct pohmelfs_config *new) +{ + if ((dst->state.ctl.prio == new->state.ctl.prio) && + (dst->state.ctl.perm == new->state.ctl.perm)) + return 0; + + dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n", + __func__, dst->state.ctl.prio, dst->state.ctl.perm, + new->state.ctl.prio, new->state.ctl.perm); + dst->state.ctl.prio = new->state.ctl.prio; + dst->state.ctl.perm = new->state.ctl.perm; + + list_del_init(&dst->config_entry); + pohmelfs_insert_config_entry(psb, dst); + return 0; +} + +/* + * pohmelfs_copy_config() is used to copy new state configs from the + * config group (controlled by the netlink messages) into the superblock. + * This happens either at startup time where no transactions can access + * the list of the configs (and thus list of the network states), or at + * run-time, where it is protected by the psb->state_lock. + */ int pohmelfs_copy_config(struct pohmelfs_sb *psb) { struct pohmelfs_config_group *g; @@ -103,7 +142,9 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb) err = 0; list_for_each_entry(dst, &psb->state_list, config_entry) { if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) { - err = -EEXIST; + err = pohmelfs_move_config_entry(psb, dst, c); + if (!err) + err = -EEXIST; break; } } @@ -119,7 +160,7 @@ int pohmelfs_copy_config(struct pohmelfs_sb *psb) memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl)); - list_add_tail(&dst->config_entry, &psb->state_list); + pohmelfs_insert_config_entry(psb, dst); err = pohmelfs_state_init_one(psb, dst); if (err) { @@ -248,6 +289,13 @@ out_unlock: return err; } +static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new) +{ + old->perm = new->perm; + old->prio = new->prio; + return 0; +} + static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) { struct pohmelfs_config_group *g; @@ -278,6 +326,9 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) g->num_entry--; kfree(c); goto out_unlock; + } else if (action == POHMELFS_FLAGS_MODIFY) { + err = pohmelfs_modify_config(sc, ctl); + goto out_unlock; } else { err = -EEXIST; goto out_unlock; @@ -296,6 +347,7 @@ static int pohmelfs_cn_ctl(struct cn_msg *msg, int action) } memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl)); g->num_entry++; + list_add_tail(&c->config_entry, &g->config_list); out_unlock: @@ -401,10 +453,9 @@ static void pohmelfs_cn_callback(void *data) switch (msg->flags) { case POHMELFS_FLAGS_ADD: - err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD); - break; case POHMELFS_FLAGS_DEL: - err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL); + case POHMELFS_FLAGS_MODIFY: + err = pohmelfs_cn_ctl(msg, msg->flags); break; case POHMELFS_FLAGS_SHOW: err = pohmelfs_cn_disp(msg); diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 7a41183a32e1..b5799842fb84 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -328,7 +328,7 @@ static int pohmelfs_sync_remote_dir(struct pohmelfs_inode *pi) { struct inode *inode = &pi->vfs_inode; struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb); - long ret = msecs_to_jiffies(25000); + long ret = psb->wait_on_page_timeout; int err; dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n", @@ -389,11 +389,11 @@ static int pohmelfs_readdir(struct file *file, void *dirent, filldir_t filldir) dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n", __func__, pi->ino, (u64)file->f_pos, (unsigned long)file->private_data); - +#if 0 err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); if (err) return err; - +#endif err = pohmelfs_sync_remote_dir(pi); if (err) return err; @@ -513,10 +513,6 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct need_lock = pohmelfs_need_lock(parent, lock_type); - err = pohmelfs_data_lock(parent, 0, ~0, lock_type); - if (err) - goto out; - str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0); mutex_lock(&parent->offset_lock); @@ -525,8 +521,8 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct ino = n->ino; mutex_unlock(&parent->offset_lock); - dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n", - __func__, ino, inode, str.name, str.hash, parent->state); + dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n", + __func__, ino, inode, str.name, str.hash, parent->state, need_lock); if (ino) { inode = ilookup(dir->i_sb, ino); @@ -534,7 +530,7 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct goto out; } - dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n", + dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n", __func__, dir, parent->ino, str.name, str.len, parent->state, ino); @@ -543,6 +539,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct goto out; } + err = pohmelfs_data_lock(parent, 0, ~0, lock_type); + if (err) + goto out; + err = pohmelfs_lookup_single(parent, &str, ino); if (err) goto out; @@ -557,10 +557,10 @@ struct dentry *pohmelfs_lookup(struct inode *dir, struct dentry *dentry, struct if (ino) { inode = ilookup(dir->i_sb, ino); - printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n", + dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n", __func__, ino, inode, str.name, str.hash); if (!inode) { - printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n", + dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n", __func__, ino, str.name, str.hash); //return NULL; return ERR_PTR(-EACCES); diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index 5bf16504cd6f..b2eaf9047266 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -1169,16 +1169,17 @@ err_out_put: static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct inode *inode = dentry->d_inode; +#if 0 struct pohmelfs_inode *pi = POHMELFS_I(inode); int err; err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK); if (err) return err; - dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n", __func__, pi->ino, inode->i_mode, inode->i_uid, inode->i_gid, inode->i_size); +#endif generic_fillattr(inode, stat); return 0; @@ -1342,14 +1343,6 @@ static void pohmelfs_put_super(struct super_block *sb) kfree(psb); sb->s_fs_info = NULL; - - pohmelfs_ftrans_exit(); -} - -static int pohmelfs_remount(struct super_block *sb, int *flags, char *data) -{ - *flags |= MS_RDONLY; - return 0; } static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf) @@ -1394,42 +1387,33 @@ static int pohmelfs_show_options(struct seq_file *seq, struct vfsmount *vfs) return 0; } -static const struct super_operations pohmelfs_sb_ops = { - .alloc_inode = pohmelfs_alloc_inode, - .destroy_inode = pohmelfs_destroy_inode, - .drop_inode = pohmelfs_drop_inode, - .write_inode = pohmelfs_write_inode, - .put_super = pohmelfs_put_super, - .remount_fs = pohmelfs_remount, - .statfs = pohmelfs_statfs, - .show_options = pohmelfs_show_options, -}; - enum { pohmelfs_opt_idx, + pohmelfs_opt_crypto_thread_num, + pohmelfs_opt_trans_max_pages, + pohmelfs_opt_crypto_fail_unsupported, + + /* Remountable options */ pohmelfs_opt_trans_scan_timeout, pohmelfs_opt_drop_scan_timeout, pohmelfs_opt_wait_on_page_timeout, pohmelfs_opt_trans_retries, - pohmelfs_opt_crypto_thread_num, - pohmelfs_opt_trans_max_pages, - pohmelfs_opt_crypto_fail_unsupported, pohmelfs_opt_mcache_timeout, }; static struct match_token pohmelfs_tokens[] = { {pohmelfs_opt_idx, "idx=%u"}, + {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"}, + {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"}, + {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"}, {pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"}, {pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"}, {pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"}, {pohmelfs_opt_trans_retries, "trans_retries=%u"}, - {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"}, - {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"}, - {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"}, {pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"}, }; -static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) +static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount) { char *p; substring_t args[MAX_OPT_ARGS]; @@ -1449,6 +1433,9 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) if (err) return err; + if (remount && token <= pohmelfs_opt_crypto_fail_unsupported) + continue; + switch (token) { case pohmelfs_opt_idx: psb->idx = option; @@ -1485,6 +1472,25 @@ static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb) return 0; } +static int pohmelfs_remount(struct super_block *sb, int *flags, char *data) +{ + int err; + struct pohmelfs_sb *psb = POHMELFS_SB(sb); + unsigned long old_sb_flags = sb->s_flags; + + err = pohmelfs_parse_options(data, psb, 1); + if (err) + goto err_out_restore; + + if (!(*flags & MS_RDONLY)) + sb->s_flags &= ~MS_RDONLY; + return 0; + +err_out_restore: + sb->s_flags = old_sb_flags; + return err; +} + static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count) { struct inode *inode = &pi->vfs_inode; @@ -1753,6 +1759,57 @@ err_out_exit: return err; } +static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt) +{ + struct netfs_state *st; + struct pohmelfs_ctl *ctl; + struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb); + struct pohmelfs_config *c; + + mutex_lock(&psb->state_lock); + + seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n"); + + list_for_each_entry(c, &psb->state_list, config_entry) { + st = &c->state; + ctl = &st->ctl; + + seq_printf(m, "%u ", ctl->idx); + if (ctl->addr.sa_family == AF_INET) { + struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr; + //seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port)); + seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); + } else if (ctl->addr.sa_family == AF_INET6) { + struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr; + seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port)); + } else { + unsigned int i; + for (i=0; i<ctl->addrlen; ++i) + seq_printf(m, "%02x.", ctl->addr.addr[i]); + } + + seq_printf(m, " %u %u %d %u %x\n", + ctl->type, ctl->proto, + st->socket != NULL, + ctl->prio, ctl->perm); + } + mutex_unlock(&psb->state_lock); + + return 0; +} + +static const struct super_operations pohmelfs_sb_ops = { + .alloc_inode = pohmelfs_alloc_inode, + .destroy_inode = pohmelfs_destroy_inode, + .drop_inode = pohmelfs_drop_inode, + .write_inode = pohmelfs_write_inode, + .put_super = pohmelfs_put_super, + .remount_fs = pohmelfs_remount, + .statfs = pohmelfs_statfs, + .show_options = pohmelfs_show_options, + .show_stats = pohmelfs_show_stats, +}; + /* * Allocate private superblock and create root dir. */ @@ -1764,8 +1821,6 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) struct pohmelfs_inode *npi; struct qstr str; - pohmelfs_ftrans_init(); - psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL); if (!psb) goto err_out_exit; @@ -1816,7 +1871,7 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) mutex_init(&psb->state_lock); INIT_LIST_HEAD(&psb->state_list); - err = pohmelfs_parse_options((char *) data, psb); + err = pohmelfs_parse_options((char *) data, psb, 0); if (err) goto err_out_free_sb; @@ -1845,6 +1900,8 @@ static int pohmelfs_fill_super(struct super_block *sb, void *data, int silent) err = PTR_ERR(npi); goto err_out_crypto_exit; } + set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); + clear_bit(NETFS_INODE_OWNED, &npi->state); root = &npi->vfs_inode; @@ -1887,11 +1944,29 @@ static int pohmelfs_get_sb(struct file_system_type *fs_type, mnt); } +/* + * We need this to sync all inodes earlier, since when writeback + * is invoked from the umount/mntput path dcache is already shrunk, + * see generic_shutdown_super(), and no inodes can access the path. + */ +static void pohmelfs_kill_super(struct super_block *sb) +{ + struct writeback_control wbc = { + .sync_mode = WB_SYNC_ALL, + .range_start = 0, + .range_end = LLONG_MAX, + .nr_to_write = LONG_MAX, + }; + generic_sync_sb_inodes(sb, &wbc); + + kill_anon_super(sb); +} + static struct file_system_type pohmel_fs_type = { .owner = THIS_MODULE, .name = "pohmel", .get_sb = pohmelfs_get_sb, - .kill_sb = kill_anon_super, + .kill_sb = pohmelfs_kill_super, }; /* diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c index ad4a18559bdd..22fef18cae90 100644 --- a/drivers/staging/pohmelfs/lock.c +++ b/drivers/staging/pohmelfs/lock.c @@ -41,7 +41,8 @@ static int pohmelfs_send_lock_trans(struct pohmelfs_inode *pi, path_len = err; err = -ENOMEM; - t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0); + t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, + NETFS_TRANS_SINGLE_DST, 0); if (!t) goto err_out_exit; diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c index c9b8540c1efe..11ecac026ca7 100644 --- a/drivers/staging/pohmelfs/net.c +++ b/drivers/staging/pohmelfs/net.c @@ -26,55 +26,6 @@ #include "netfs.h" -static int pohmelfs_ftrans_size = 10240; -static u32 *pohmelfs_ftrans; - -int pohmelfs_ftrans_init(void) -{ - pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4); - if (!pohmelfs_ftrans) - return -ENOMEM; - - return 0; -} - -void pohmelfs_ftrans_exit(void) -{ - vfree(pohmelfs_ftrans); -} - -void pohmelfs_ftrans_clean(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - pohmelfs_ftrans[idx] = 0; - } -} - -void pohmelfs_ftrans_update(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - pohmelfs_ftrans[idx] = i; - } -} - -int pohmelfs_ftrans_check(u64 id) -{ - if (pohmelfs_ftrans) { - u32 i = id & 0xffffffff; - int idx = i % pohmelfs_ftrans_size; - - return (pohmelfs_ftrans[idx] == i); - } - - return -1; -} - /* * Async machinery lives here. * All commands being sent to server do _not_ require sync reply, @@ -450,8 +401,24 @@ static int pohmelfs_readdir_response(struct netfs_state *st) if (err != -EEXIST) goto err_out_put; } else { + struct dentry *dentry, *alias, *pd; + set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state); clear_bit(NETFS_INODE_OWNED, &npi->state); + + pd = d_find_alias(&parent->vfs_inode); + if (pd) { + str.hash = full_name_hash(str.name, str.len); + dentry = d_alloc(pd, &str); + if (dentry) { + alias = d_materialise_unique(dentry, &npi->vfs_inode); + if (alias) + dput(dentry); + } + + dput(dentry); + dput(pd); + } } } out: @@ -638,15 +605,12 @@ static int pohmelfs_transaction_response(struct netfs_state *st) if (dst) { netfs_trans_remove_nolock(dst, st); t = dst->trans; - - pohmelfs_ftrans_update(cmd->start); } mutex_unlock(&st->trans_lock); if (!t) { - int check = pohmelfs_ftrans_check(cmd->start); - printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n", - __func__, cmd->start, cmd->id, cmd->size, cmd->ext, check); + printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n", + __func__, cmd->start, cmd->id, cmd->size, cmd->ext); err = -EINVAL; goto out; } diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h index 2ff21ae5bb12..c78cfcb042fb 100644 --- a/drivers/staging/pohmelfs/netfs.h +++ b/drivers/staging/pohmelfs/netfs.h @@ -87,6 +87,7 @@ enum { POHMELFS_FLAGS_DEL, /* Network state control message for DEL */ POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */ POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */ + POHMELFS_FLAGS_MODIFY, /* Network state modification message */ }; /* @@ -116,16 +117,20 @@ struct pohmelfs_crypto unsigned char data[0]; /* Algorithm string, key and IV */ }; +#define POHMELFS_IO_PERM_READ (1<<0) +#define POHMELFS_IO_PERM_WRITE (1<<1) + /* * Configuration command used to create table of different remote servers. */ struct pohmelfs_ctl { - unsigned int idx; /* Config index */ - unsigned int type; /* Socket type */ - unsigned int proto; /* Socket protocol */ - unsigned int addrlen; /* Size of the address */ - unsigned short unused; /* Align structure by 4 bytes */ + __u32 idx; /* Config index */ + __u32 type; /* Socket type */ + __u32 proto; /* Socket protocol */ + __u16 addrlen; /* Size of the address */ + __u16 perm; /* IO permission */ + __u16 prio; /* IO priority */ struct saddr addr; /* Remote server address */ }; @@ -921,12 +926,6 @@ static inline void pohmelfs_mcache_put(struct pohmelfs_sb *psb, pohmelfs_mcache_free(psb, m); } -int pohmelfs_ftrans_init(void); -void pohmelfs_ftrans_exit(void); -void pohmelfs_ftrans_update(u64 id); -int pohmelfs_ftrans_check(u64 id); -void pohmelfs_ftrans_clean(u64 id); - #endif /* __KERNEL__*/ #endif /* __NETFS_H */ diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c index bcb59425a21c..fef5f9bd6920 100644 --- a/drivers/staging/pohmelfs/trans.c +++ b/drivers/staging/pohmelfs/trans.c @@ -456,34 +456,25 @@ int netfs_trans_finish_send(struct netfs_trans *t, struct pohmelfs_sb *psb) __func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state); #endif mutex_lock(&psb->state_lock); + list_for_each_entry(c, &psb->state_list, config_entry) { + st = &c->state; - if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) { - st = &psb->active_state->state; - - err = -EPIPE; - if (netfs_state_poll(st) & POLLOUT) { - err = netfs_trans_push_dst(t, st); - if (!err) { - err = netfs_trans_send(t, st); - if (err) { - netfs_trans_drop_last(t, st); - } else { - pohmelfs_switch_active(psb); - goto out; - } - } + if (t->flags & NETFS_TRANS_SINGLE_DST) { + if (!(st->ctl.perm & POHMELFS_IO_PERM_READ)) + continue; + } else { + if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE)) + continue; } - pohmelfs_switch_active(psb); - } - list_for_each_entry(c, &psb->state_list, config_entry) { - st = &c->state; + if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio)) + st = &psb->active_state->state; err = netfs_trans_push(t, st); if (!err && (t->flags & NETFS_TRANS_SINGLE_DST)) break; } -out: + mutex_unlock(&psb->state_lock); #if 0 dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n", @@ -501,8 +492,6 @@ int netfs_trans_finish(struct netfs_trans *t, struct pohmelfs_sb *psb) t->gen = atomic_inc_return(&psb->trans_gen); - pohmelfs_ftrans_clean(t->gen); - cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) + t->attached_size + t->attached_pages * sizeof(struct netfs_cmd); cmd->cmd = NETFS_TRANS; diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index cf17bcdd7333..6c4396f0903b 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -722,6 +722,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt2860_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -733,11 +747,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // #ifdef CONFIG_STA_SUPPORT #if WIRELESS_EXT >= 12 @@ -760,12 +769,8 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; - dev->validate_addr = NULL; + dev->netdev_ops = &rt2860_netdev_ops; // find available device name for (i = 0; i < 8; i++) { diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index 5dd15aac9ce7..a42caa370808 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -96,6 +96,7 @@ {USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \ {USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \ + {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \ {USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \ {USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \ {USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \ diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c index 313ecea0bfa8..48ad41136d0f 100644 --- a/drivers/staging/rt2870/rt_main_dev.c +++ b/drivers/staging/rt2870/rt_main_dev.c @@ -855,6 +855,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt2870_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -866,12 +880,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // - // dev->set_multicast_list = ieee80211_set_multicast_list; // dev->change_mtu = ieee80211_change_mtu; #ifdef CONFIG_STA_SUPPORT @@ -895,16 +903,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; // dev->uninit = ieee80211_if_reinit; // dev->destructor = ieee80211_if_free; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) - dev->validate_addr = NULL; -#endif + dev->netdev_ops = &rt2870_netdev_ops; // find available device name for (i = 0; i < 8; i++) { diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c index c000646286e6..81f769cf1096 100644 --- a/drivers/staging/rt3070/rt_main_dev.c +++ b/drivers/staging/rt3070/rt_main_dev.c @@ -436,7 +436,6 @@ static int rt28xx_init(IN struct net_device *net_dev) // OID_SET_HT_PHYMODE SetHT; // WPDMA_GLO_CFG_STRUC GloCfg; UINT32 MacCsr0 = 0; - UINT32 MacValue = 0; #ifdef RT2870 #ifdef INF_AMAZON_SE @@ -849,6 +848,20 @@ err: return (-1); } /* End of rt28xx_open */ +static const struct net_device_ops rt3070_netdev_ops = { + .ndo_open = MainVirtualIF_open, + .ndo_stop = MainVirtualIF_close, + .ndo_do_ioctl = rt28xx_ioctl, + .ndo_get_stats = RT28xx_get_ether_stats, + .ndo_validate_addr = NULL, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef IKANOS_VX_1X0 + .ndo_start_xmit = IKANOS_DataFramesTx, +#else + .ndo_start_xmit = rt28xx_send_packets, +#endif +}; /* Must not be called for mdev and apdev */ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd) @@ -860,12 +873,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p //ether_setup(dev); - dev->hard_start_xmit = rt28xx_send_packets; - -#ifdef IKANOS_VX_1X0 - dev->hard_start_xmit = IKANOS_DataFramesTx; -#endif // IKANOS_VX_1X0 // - // dev->set_multicast_list = ieee80211_set_multicast_list; // dev->change_mtu = ieee80211_change_mtu; #ifdef CONFIG_STA_SUPPORT @@ -889,16 +896,10 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #if WIRELESS_EXT < 21 dev->get_wireless_stats = rt28xx_get_wireless_stats; #endif - dev->get_stats = RT28xx_get_ether_stats; - dev->open = MainVirtualIF_open; //rt28xx_open; - dev->stop = MainVirtualIF_close; //rt28xx_close; // dev->uninit = ieee80211_if_reinit; // dev->destructor = ieee80211_if_free; dev->priv_flags = INT_MAIN; - dev->do_ioctl = rt28xx_ioctl; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) - dev->validate_addr = NULL; -#endif + dev->netdev_ops = &rt3070_netdev_ops; // find available device name for (i = 0; i < 8; i++) { diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README index 2d5b1127ce51..70f49099c065 100644 --- a/drivers/staging/slicoss/README +++ b/drivers/staging/slicoss/README @@ -10,7 +10,36 @@ TODO: - move firmware loading to request_firmware() - remove direct memory access of structures - any remaining sparse and checkpatch.pl warnings - - any netdev recommended changes + + - use net_device_ops + - use dev->stats rather than adapter->stats + - don't cast netdev_priv it is already void + - use compare_ether_addr + - GET RID OF MACROS + - work on all architectures + - without CONFIG_X86_64 confusion + - do 64 bit correctly + - don't depend on order of union + - get rid of ASSERT(), use BUG() instead but only where necessary + looks like most aren't really useful + - no new SIOCDEVPRIVATE ioctl allowed + - don't use module_param for configuring interrupt mitigation + use ethtool instead + - reorder code to elminate use of forward declarations + - don't keep private linked list of drivers. + - remove all the gratiutous debug infrastructure + - use PCI_DEVICE() + - do ethtool correctly using ethtool_ops + - NAPI? + - wasted overhead of extra stats + - state variables for things that are + easily availble and shouldn't be kept in card structure, cardnum, ... + slotnumber, events, ... + - get rid of slic_spinlock wrapper + - volatile == bad design => bad code + - locking too fine grained, not designed just throw more locks + at problem + Please send patches to: Greg Kroah-Hartman <gregkh@suse.de> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index 948156348478..6f5d0bff4358 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -345,6 +345,19 @@ static void slic_init_adapter(struct net_device *netdev, return; } +static const struct net_device_ops slic_netdev_ops = { + .ndo_open = slic_entry_open, + .ndo_stop = slic_entry_halt, + .ndo_start_xmit = slic_xmit_start, + .ndo_do_ioctl = slic_ioctl, + .ndo_set_mac_address = slic_mac_set_address, + .ndo_get_stats = slic_get_stats, + .ndo_set_multicast_list = slic_mcast_set_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + static int __devinit slic_entry_probe(struct pci_dev *pcidev, const struct pci_device_id *pci_tbl_entry) { @@ -442,13 +455,7 @@ static int __devinit slic_entry_probe(struct pci_dev *pcidev, netdev->base_addr = (unsigned long)adapter->memorybase; netdev->irq = adapter->irq; - netdev->open = slic_entry_open; - netdev->stop = slic_entry_halt; - netdev->hard_start_xmit = slic_xmit_start; - netdev->do_ioctl = slic_ioctl; - netdev->set_mac_address = slic_mac_set_address; - netdev->get_stats = slic_get_stats; - netdev->set_multicast_list = slic_mcast_set_list; + netdev->netdev_ops = &slic_netdev_ops; slic_debug_adapter_create(adapter); @@ -1260,7 +1267,7 @@ static int slic_mcast_add_list(struct adapter *adapter, char *address) } /* Doesn't already exist. Allocate a structure to hold it */ - mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL); + mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC); if (mcaddr == NULL) return 1; @@ -2284,7 +2291,7 @@ static u32 slic_card_locate(struct adapter *adapter) } if (!physcard) { /* no structure allocated for this physical card yet */ - physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL); + physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC); ASSERT(physcard); physcard->next = slic_global.phys_card; diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig index 8d3f46f190e8..947fb75a9c68 100644 --- a/drivers/staging/stlc45xx/Kconfig +++ b/drivers/staging/stlc45xx/Kconfig @@ -1,6 +1,6 @@ config STLC45XX tristate "stlc4550/4560 support" - depends on MAC80211 && WLAN_80211 && SPI_MASTER + depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS ---help--- This is a driver for stlc4550 and stlc4560 chipsets. diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 891f6e334672..076b3f7d39eb 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -322,6 +322,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter) int ret,i; if (!adapter->intrregistered) { + spin_unlock_irqrestore(&sxg_global.driver_lock, + sxg_global.flags); for (i=0; i<adapter->nr_msix_entries; i++) { ret = request_irq (adapter->msi_entries[i].vector, sxg_isr, @@ -329,6 +331,8 @@ int sxg_add_msi_isr(struct adapter_t *adapter) adapter->netdev->name, adapter->netdev); if (ret) { + spin_lock_irqsave(&sxg_global.driver_lock, + sxg_global.flags); DBG_ERROR("sxg: MSI-X request_irq (%s) " "FAILED [%x]\n", adapter->netdev->name, ret); @@ -336,6 +340,7 @@ int sxg_add_msi_isr(struct adapter_t *adapter) } } } + spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags); adapter->msi_enabled = TRUE; adapter->intrregistered = 1; adapter->IntRegistered = TRUE; @@ -896,6 +901,22 @@ static inline int sxg_read_config(struct adapter_t *adapter) return status; } +static const struct net_device_ops sxg_netdev_ops = { + .ndo_open = sxg_entry_open, + .ndo_stop = sxg_entry_halt, + .ndo_start_xmit = sxg_send_packets, + .ndo_do_ioctl = sxg_ioctl, + .ndo_change_mtu = sxg_change_mtu, + .ndo_get_stats = sxg_get_stats, + .ndo_set_multicast_list = sxg_mcast_set_list, + .ndo_validate_addr = eth_validate_addr, +#if XXXTODO + .ndo_set_mac_address = sxg_mac_set_address, +#else + .ndo_set_mac_address = eth_mac_addr, +#endif +}; + static int sxg_entry_probe(struct pci_dev *pcidev, const struct pci_device_id *pci_tbl_entry) { @@ -1095,16 +1116,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, netdev->base_addr = (unsigned long)adapter->base_addr; netdev->irq = adapter->irq; - netdev->open = sxg_entry_open; - netdev->stop = sxg_entry_halt; - netdev->hard_start_xmit = sxg_send_packets; - netdev->do_ioctl = sxg_ioctl; - netdev->change_mtu = sxg_change_mtu; -#if XXXTODO - netdev->set_mac_address = sxg_mac_set_address; -#endif - netdev->get_stats = sxg_get_stats; - netdev->set_multicast_list = sxg_mcast_set_list; + netdev->netdev_ops = &sxg_netdev_ops; SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops); netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; err = sxg_set_interrupt_capability(adapter); @@ -2247,6 +2259,8 @@ static int sxg_entry_open(struct net_device *dev) DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); + mod_timer(&adapter->watchdog_timer, jiffies); + return STATUS_SUCCESS; } @@ -2568,6 +2582,7 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, u64 phys_addr; unsigned long flags; unsigned long queue_id=0; + int offload_cksum = 0; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl", pSgl, SxgSgl, 0, 0); @@ -2606,7 +2621,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, struct iphdr *ip; ip = ip_hdr(skb); - if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof( + if (ip->protocol == IPPROTO_TCP) + offload_cksum = 1; + if (!offload_cksum || !tcp_hdr(skb)) + queue_id = 0; + else if (offload_cksum && (DataLength >= sizeof( struct tcphdr))){ queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & @@ -2615,8 +2634,11 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, SXG_LARGE_SEND_QUEUE_MASK)); } } else if (skb->protocol == htons(ETH_P_IPV6)) { - if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >= - sizeof(struct tcphdr)) ) { + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + offload_cksum = 1; + if (!offload_cksum || !tcp_hdr(skb)) + queue_id = 0; + else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){ queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ? (ntohs (tcp_hdr(skb)->source) & SXG_LARGE_SEND_QUEUE_MASK): @@ -2645,23 +2667,38 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd", XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0); - /* Update stats */ - adapter->stats.tx_packets++; - adapter->stats.tx_bytes += DataLength; -#if XXXTODO /* Stats stuff */ - if (SXG_MULTICAST_PACKET(EtherHdr)) { - if (SXG_BROADCAST_PACKET(EtherHdr)) { - adapter->Stats.DumbXmtBcastPkts++; - adapter->Stats.DumbXmtBcastBytes += DataLength; + memset(XmtCmd, '\0', sizeof(*XmtCmd)); + XmtCmd->SgEntries = 1; + XmtCmd->Flags = 0; + if (skb->ip_summed == CHECKSUM_PARTIAL) { + /* + * We need to set the Checkum in IP header to 0. This is + * required by hardware. + */ + if (offload_cksum) { + ip_hdr(skb)->check = 0x0; + XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP; + XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP; + /* + * Dont know if length will require a change in + * case of VLAN + */ + XmtCmd->CsumFlags.MacLen = ETH_HLEN; + XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >> + SXG_NW_HDR_LEN_SHIFT; } else { - adapter->Stats.DumbXmtMcastPkts++; - adapter->Stats.DumbXmtMcastBytes += DataLength; + if (skb_checksum_help(skb)){ + printk(KERN_EMERG "Dropped UDP packet for" + " incorrect checksum calculation\n"); + if (XmtCmd) + SXG_ABORT_CMD(XmtRingInfo); + spin_unlock_irqrestore(&adapter->XmtZeroLock, + flags); + return STATUS_SUCCESS; + } } - } else { - adapter->Stats.DumbXmtUcastPkts++; - adapter->Stats.DumbXmtUcastBytes += DataLength; } -#endif + /* * Fill in the command * Copy out the first SGE to the command and adjust for offset @@ -2679,31 +2716,17 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, (SXG_INVALID_SGL(phys_addr,skb->data_len))) { spin_unlock_irqrestore(&adapter->XmtZeroLock, flags); + if (XmtCmd) + SXG_ABORT_CMD(XmtRingInfo); /* Silently drop this packet */ printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n"); return STATUS_SUCCESS; } - memset(XmtCmd, '\0', sizeof(*XmtCmd)); XmtCmd->Buffer.FirstSgeAddress = phys_addr; XmtCmd->Buffer.FirstSgeLength = DataLength; XmtCmd->Buffer.SgeOffset = 0; XmtCmd->Buffer.TotalLength = DataLength; - XmtCmd->SgEntries = 1; - XmtCmd->Flags = 0; - if (skb->ip_summed == CHECKSUM_PARTIAL) { - /* - * We need to set the Checkum in IP header to 0. This is - * required by hardware. - */ - ip_hdr(skb)->check = 0x0; - XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP; - XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP; - /* Dont know if length will require a change in case of VLAN */ - XmtCmd->CsumFlags.MacLen = ETH_HLEN; - XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >> - SXG_NW_HDR_LEN_SHIFT; - } /* * Advance transmit cmd descripter by 1. * NOTE - See comments in SxgTcpOutput where we write @@ -2715,6 +2738,24 @@ static int sxg_dumb_sgl(struct sxg_x64_sgl *pSgl, ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0); WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE); adapter->Stats.XmtQLen++; /* Stats within lock */ + /* Update stats */ + adapter->stats.tx_packets++; + adapter->stats.tx_bytes += DataLength; +#if XXXTODO /* Stats stuff */ + if (SXG_MULTICAST_PACKET(EtherHdr)) { + if (SXG_BROADCAST_PACKET(EtherHdr)) { + adapter->Stats.DumbXmtBcastPkts++; + adapter->Stats.DumbXmtBcastBytes += DataLength; + } else { + adapter->Stats.DumbXmtMcastPkts++; + adapter->Stats.DumbXmtMcastBytes += DataLength; + } + } else { + adapter->Stats.DumbXmtUcastPkts++; + adapter->Stats.DumbXmtUcastBytes += DataLength; + } +#endif + spin_unlock_irqrestore(&adapter->XmtZeroLock, flags); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2", XmtCmd, pSgl, SxgSgl, 0); diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c index 85b705453066..9c62f787cc9c 100644 --- a/drivers/staging/uc2322/aten2011.c +++ b/drivers/staging/uc2322/aten2011.c @@ -603,10 +603,9 @@ static void ATEN2011_bulk_out_data_callback(struct urb *urb) tty = tty_port_tty_get(&ATEN2011_port->port->port); - if (tty && ATEN2011_port->open) { + if (tty && ATEN2011_port->open) /* tell the tty driver that something has changed */ - wake_up_interruptible(&tty->write_wait); - } + tty_wakeup(tty); /* schedule_work(&ATEN2011_port->port->work); */ tty_kref_put(tty); @@ -825,12 +824,6 @@ static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, status = 0; status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - - if (tty) - tty->low_latency = 1; /* * Check to see if we've set up our endpoint info yet * (can't set it up in ATEN2011_startup as the structures @@ -1473,22 +1466,7 @@ static void ATEN2011_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; - if (!cflag) { - dbg("%s %s", __func__, "cflag is NULL"); - return; - } - - /* check that they really want us to change something */ - if (old_termios) { - if ((cflag == old_termios->c_cflag) && - (RELEVANT_IFLAG(tty->termios->c_iflag) == - RELEVANT_IFLAG(old_termios->c_iflag))) { - dbg("%s", "Nothing to change"); - return; - } - } - - dbg("%s - clfag %08x iflag %08x", __func__, + dbg("%s - cflag %08x iflag %08x", __func__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); if (old_termios) { diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c index b2a606a36936..393e4df70dfd 100644 --- a/drivers/staging/wlan-ng/p80211netdev.c +++ b/drivers/staging/wlan-ng/p80211netdev.c @@ -711,6 +711,20 @@ static int wlan_change_mtu(netdevice_t *dev, int new_mtu) return 0; } +static const struct net_device_ops p80211_netdev_ops = { + .ndo_init = p80211knetdev_init, + .ndo_open = p80211knetdev_open, + .ndo_stop = p80211knetdev_stop, + .ndo_get_stats = p80211knetdev_get_stats, + .ndo_start_xmit = p80211knetdev_hard_start_xmit, + .ndo_set_multicast_list = p80211knetdev_set_multicast_list, + .ndo_do_ioctl = p80211knetdev_do_ioctl, + .ndo_set_mac_address = p80211knetdev_set_mac_address, + .ndo_tx_timeout = p80211knetdev_tx_timeout, + .ndo_change_mtu = wlan_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + /*---------------------------------------------------------------- * wlan_setup * @@ -756,11 +770,7 @@ int wlan_setup(wlandevice_t *wlandev) } else { wlandev->netdev = dev; dev->ml_priv = wlandev; - dev->hard_start_xmit = p80211knetdev_hard_start_xmit; - dev->get_stats = p80211knetdev_get_stats; - dev->init = p80211knetdev_init; - dev->open = p80211knetdev_open; - dev->stop = p80211knetdev_stop; + dev->netdev_ops = &p80211_netdev_ops; mutex_init(&wlandev->ioctl_lock); /* block ioctls until fully initialised. Don't forget to call diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c index c60b8fcf0e3e..28034c812914 100644 --- a/drivers/uio/uio_cif.c +++ b/drivers/uio/uio_cif.c @@ -147,5 +147,6 @@ static void __exit hilscher_exit_module(void) module_init(hilscher_init_module); module_exit(hilscher_exit_module); +MODULE_DEVICE_TABLE(pci, hilscher_pci_ids); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger"); diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 3771d6e6d0cc..34e6108e1d42 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -652,7 +652,7 @@ next_desc: iface = &intf->altsetting[0]; ep = &iface->endpoint[0].desc; - if (!usb_endpoint_is_int_in(ep)) { + if (!ep || !usb_endpoint_is_int_in(ep)) { rv = -EINVAL; goto err; } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index df3c539f652a..308609039c73 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; - usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0); + usb_reset_endpoint(ps->dev, ep); return 0; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 81fa8506825d..42b93da1085d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + /* Protect against drivers that try to unlink URBs after the device * is gone, by waiting until all unlinks for @udev are finished. * Since we don't currently track URBs by device, simply wait until diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index f750eb1ab595..e7d4479de41c 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -206,6 +206,11 @@ struct hc_driver { void (*endpoint_disable)(struct usb_hcd *hcd, struct usb_host_endpoint *ep); + /* (optional) reset any endpoint state such as sequence number + and current window */ + void (*endpoint_reset)(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + /* root hub support */ int (*hub_status_data) (struct usb_hcd *hcd, char *buf); int (*hub_control) (struct usb_hcd *hcd, @@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep); extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); @@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); extern void usb_hc_died(struct usb_hcd *hcd); extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) + /* -------------------------------------------------------------------------- */ /* Enumeration is only for the hub driver, or HCD virtual root hubs */ diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 30a0690f3683..b62628377654 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe) * the copy in usb-storage, for as long as we need two copies. */ - /* toggle was reset by the clear */ - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0); + usb_reset_endpoint(dev, endp); return 0; } @@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, } /** + * usb_reset_endpoint - Reset an endpoint's state. + * @dev: the device whose endpoint is to be reset + * @epaddr: the endpoint's address. Endpoint number for output, + * endpoint number + USB_DIR_IN for input + * + * Resets any host-side endpoint state such as the toggle bit, + * sequence number or current window. + */ +void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr) +{ + unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; + struct usb_host_endpoint *ep; + + if (usb_endpoint_out(epaddr)) + ep = dev->ep_out[epnum]; + else + ep = dev->ep_in[epnum]; + if (ep) + usb_hcd_reset_endpoint(dev, ep); +} +EXPORT_SYMBOL_GPL(usb_reset_endpoint); + + +/** * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor @@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); } - dev->toggle[0] = dev->toggle[1] = 0; /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * usb_enable_endpoint - Enable an endpoint for USB communications * @dev: the device whose interface is being enabled * @ep: the endpoint - * @reset_toggle: flag to set the endpoint's toggle back to 0 + * @reset_ep: flag to reset the endpoint state * - * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers. + * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers. * For control endpoints, both the input and output sides are handled. */ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, - bool reset_toggle) + bool reset_ep) { int epnum = usb_endpoint_num(&ep->desc); int is_out = usb_endpoint_dir_out(&ep->desc); int is_control = usb_endpoint_xfer_control(&ep->desc); - if (is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 1, 0); + if (reset_ep) + usb_hcd_reset_endpoint(dev, ep); + if (is_out || is_control) dev->ep_out[epnum] = ep; - } - if (!is_out || is_control) { - if (reset_toggle) - usb_settoggle(dev, epnum, 0, 0); + if (!is_out || is_control) dev->ep_in[epnum] = ep; - } ep->enabled = 1; } @@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, * usb_enable_interface - Enable all the endpoints for an interface * @dev: the device whose interface is being enabled * @intf: pointer to the interface descriptor - * @reset_toggles: flag to set the endpoints' toggles back to 0 + * @reset_eps: flag to reset the endpoints' state * * Enables all the endpoints for the interface's current altsetting. */ void usb_enable_interface(struct usb_device *dev, - struct usb_interface *intf, bool reset_toggles) + struct usb_interface *intf, bool reset_eps) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) - usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles); + usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps); } /** @@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * This issues a standard SET_CONFIGURATION request to the device using * the current configuration. The effect is to reset most USB-related * state in the device, including interface altsettings (reset to zero), - * endpoint halts (cleared), and data toggle (only for bulk and interrupt + * endpoint halts (cleared), and endpoint state (only for bulk and interrupt * endpoints). Other usbcore state is unchanged, including bindings of * usb device drivers to interfaces. * @@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * (multi-interface) devices. Instead, the driver for each interface may * use usb_set_interface() on the interfaces it claims. Be careful though; * some devices don't support the SET_INTERFACE request, and others won't - * reset all the interface state (notably data toggles). Resetting the whole + * reset all the interface state (notably endpoint state). Resetting the whole * configuration would affect other drivers' interfaces. * * The caller must own the device lock. @@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev) if (retval < 0) return retval; - dev->toggle[0] = dev->toggle[1] = 0; - /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dcfc072630c1..7eee400d3e32 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; /* ep0 maxpacket comes later, from device descriptor */ - usb_enable_endpoint(dev, &dev->ep0, true); + usb_enable_endpoint(dev, &dev->ep0, false); dev->can_submit = 1; /* Save readable and stable topology id, distinguishing devices diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 96d65ca06ecd..4007770f7ed2 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); } -static u32 eth_get_link(struct net_device *net) -{ - struct eth_dev *dev = netdev_priv(net); - return dev->gadget->speed != USB_SPEED_UNKNOWN; -} - /* REVISIT can also support: * - WOL (by tracking suspends and issuing remote wakeup) * - msglevel (implies updated messaging) @@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net) static struct ethtool_ops ops = { .get_drvinfo = eth_get_drvinfo, - .get_link = eth_get_link + .get_link = ethtool_op_get_link, }; static void defer_kevent(struct eth_dev *dev, int flag) diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 958751ccea43..c2050785a819 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -254,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) asl_qset_insert_begin(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->async_work); - return 0; + return err; } /** diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index 1569afd6245b..e019a5058ab8 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd, } } +static void whc_endpoint_reset(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + qset->remove = 1; + + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + queue_work(whc->workqueue, &whc->async_work); + else + queue_work(whc->workqueue, &whc->periodic_work); + + qset_reset(whc, qset); + } +} + + static struct hc_driver whc_hc_driver = { .description = "whci-hcd", .product_desc = "Wireless host controller", @@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = { .urb_enqueue = whc_urb_enqueue, .urb_dequeue = whc_urb_dequeue, .endpoint_disable = whc_endpoint_disable, + .endpoint_reset = whc_endpoint_reset, .hub_status_data = wusbhc_rh_status_data, .hub_control = wusbhc_rh_control, diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index df8b85f07092..ff4ef9e910d9 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) process_inactive_qtd(whc, qset, td); } - update |= qset_add_qtds(whc, qset); + if (!qset->remove) + update |= qset_add_qtds(whc, qset); done: /* @@ -282,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) spin_lock_irqsave(&whc->lock, flags); + err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (err < 0) { + spin_unlock_irqrestore(&whc->lock, flags); + return err; + } + qset = get_qset(whc, urb, GFP_ATOMIC); if (qset == NULL) err = -ENOMEM; else err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); if (!err) { - usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); if (!qset->in_sw_list) qset_insert_in_sw_list(whc, qset); - } + } else + usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); spin_unlock_irqrestore(&whc->lock, flags); if (!err) queue_work(whc->workqueue, &whc->periodic_work); - return 0; + return err; } /** @@ -353,7 +360,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) qset_delete(whc, qset); } - /** * pzl_init - initialize the periodic zone list * @whc: the WHCI host controller diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index 7be74314ee12..640b38fbd051 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) QH_INFO3_TX_RATE_53_3 | QH_INFO3_TX_PWR(0) /* 0 == max power */ ); + + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); } /** * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule + * schedule. + * + * The sequence number and current window are not cleared (see + * qset_reset()). */ void qset_clear(struct whc *whc, struct whc_qset *qset) { @@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) qset->remove = 0; qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; qset->qh.err_count = 0; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); qset->qh.scratch[0] = 0; qset->qh.scratch[1] = 0; qset->qh.scratch[2] = 0; @@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset) } /** + * qset_reset - reset endpoint state in a qset. + * + * Clears the sequence number and current window. This qset must not + * be in the ASL or PZL. + */ +void qset_reset(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + + qset->qh.status &= ~QH_STATUS_SEQ_MASK; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); +} + +/** * get_qset - get the qset for an async endpoint * * A new qset is created if one does not already exist. diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index d3543a181dc9..24e94d983c5e 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset); struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); void qset_delete(struct whc *whc, struct whc_qset *qset); void qset_clear(struct whc *whc, struct whc_qset *qset); +void qset_reset(struct whc *whc, struct whc_qset *qset); int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, gfp_t mem_flags); void qset_free_std(struct whc *whc, struct whc_std *std); diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h index 51df7e313b38..794dba0d0f0a 100644 --- a/drivers/usb/host/whci/whci-hc.h +++ b/drivers/usb/host/whci/whci-hc.h @@ -185,6 +185,7 @@ struct whc_qhead { #define QH_STATUS_FLOW_CTRL (1 << 15) #define QH_STATUS_ICUR(i) ((i) << 5) #define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) +#define QH_STATUS_SEQ_MASK 0x1f /** * usb_pipe_to_qh_type - USB core pipe type to QH transfer type diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 569ef0fed0f6..1976e9b41800 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * trigger the "send a ZLP?" confusion. */ rndis = (maxpacket & 0x3f) == 0 + && length > maxpacket && length < 0xffff && (length % maxpacket) != 0; @@ -1228,27 +1229,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx) hw_ep = tx_ch->hw_ep; - /* Peripheral role never repurposes the - * endpoint, so immediate completion is - * safe. Host role waits for the fifo - * to empty (TXPKTRDY irq) before going - * to the next queued bulk transfer. - */ - if (is_host_active(cppi->musb)) { -#if 0 - /* WORKAROUND because we may - * not always get TXKPTRDY ... - */ - int csr; - - csr = musb_readw(hw_ep->regs, - MUSB_TXCSR); - if (csr & MUSB_TXCSR_TXPKTRDY) -#endif - completed = false; - } - if (completed) - musb_dma_completion(musb, index + 1, 1); + musb_dma_completion(musb, index + 1, 1); } else { /* Bigger transfer than we could fit in diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 338cd1611ab3..0112353ec97d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message) return 0; } -static int musb_resume(struct platform_device *pdev) +static int musb_resume_early(struct platform_device *pdev) { - unsigned long flags; struct musb *musb = dev_to_musb(&pdev->dev); if (!musb->clock) return 0; - spin_lock_irqsave(&musb->lock, flags); - if (musb->set_clock) musb->set_clock(musb->clock, 1); else clk_enable(musb->clock); /* for static cmos like DaVinci, register values were preserved - * unless for some reason the whole soc powered down and we're - * not treating that as a whole-system restart (e.g. swsusp) + * unless for some reason the whole soc powered down or the USB + * module got reset through the PSC (vs just being disabled). */ - spin_unlock_irqrestore(&musb->lock, flags); return 0; } @@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = { .remove = __devexit_p(musb_remove), .shutdown = musb_shutdown, .suspend = musb_suspend, - .resume = musb_resume, + .resume_early = musb_resume_early, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c7ebd0867fcc..f79440cdfe7e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status) if (is_dma_capable() && ep->dma) { struct dma_controller *c = ep->musb->dma_controller; int value; + if (ep->is_in) { + /* + * The programming guide says that we must not clear + * the DMAMODE bit before DMAENAB, so we only + * clear it in the second write... + */ musb_writew(epio, MUSB_TXCSR, - 0 | MUSB_TXCSR_FLUSHFIFO); + MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); musb_writew(epio, MUSB_TXCSR, 0 | MUSB_TXCSR_FLUSHFIFO); } else { @@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) | IN token(s) are recd from Host. | -> DMA interrupt on completion | calls TxAvail. - | -> stop DMA, ~DmaEenab, + | -> stop DMA, ~DMAENAB, | -> set TxPktRdy for last short pkt or zlp | -> Complete Request | -> Continue next request (call txstate) @@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req) request->dma, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { - /* ASSERT: DMAENAB is clear */ - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAMODE); + /* + * We must not clear the DMAMODE bit + * before the DMAENAB bit -- and the + * latter doesn't always get cleared + * before we get here... + */ + csr &= ~(MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr + | MUSB_TXCSR_P_WZC_BITS); + csr &= ~MUSB_TXCSR_DMAMODE; csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_MODE); /* against programming guide */ @@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req) #elif defined(CONFIG_USB_TI_CPPI_DMA) /* program endpoint CSR first, then setup DMA */ - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_P_UNDERRUN - | MUSB_TXCSR_TXPKTRDY); + csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) @@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req) if (!use_dma) { c->channel_release(musb_ep->dma); musb_ep->dma = NULL; - /* ASSERT: DMAENAB clear */ - csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); + csr &= ~MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, csr); /* invariant: prequest->buf is non-null */ } #elif defined(CONFIG_USB_TUSB_OMAP_DMA) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 499c431a6d62..db1b57415ec7 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -96,8 +97,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int nOut, - u8 *buf, u32 len); + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len); /* * Clear TX fifo. Needed to avoid BABBLE errors. @@ -125,6 +126,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) } } +static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep) +{ + void __iomem *epio = ep->regs; + u16 csr; + int retries = 5; + + /* scrub any data left in the fifo */ + do { + csr = musb_readw(epio, MUSB_TXCSR); + if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY))) + break; + musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO); + csr = musb_readw(epio, MUSB_TXCSR); + udelay(10); + } while (--retries); + + WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n", + ep->epnum, csr); + + /* and reset for the next transfer */ + musb_writew(epio, MUSB_TXCSR, 0); +} + /* * Start transmit. Caller is responsible for locking shared resources. * musb must be locked. @@ -145,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep) } -static inline void cppi_host_txdma_start(struct musb_hw_ep *ep) +static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep) { u16 txcsr; /* NOTE: no locks here; caller should lock and select EP */ txcsr = musb_readw(ep->regs, MUSB_TXCSR); txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS; + if (is_cppi_enabled()) + txcsr |= MUSB_TXCSR_DMAMODE; musb_writew(ep->regs, MUSB_TXCSR, txcsr); } @@ -166,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) { u16 frame; u32 len; - void *buf; void __iomem *mbase = musb->mregs; struct urb *urb = next_urb(qh); + void *buf = urb->transfer_buffer; + u32 offset = 0; struct musb_hw_ep *hw_ep = qh->hw_ep; unsigned pipe = urb->pipe; u8 address = usb_pipedevice(pipe); @@ -191,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: qh->iso_idx = 0; qh->frame = 0; - buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset; + offset = urb->iso_frame_desc[0].offset; len = urb->iso_frame_desc[0].length; break; default: /* bulk, interrupt */ @@ -209,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; default: s = "-intr"; break; }; s; }), - epnum, buf, len); + epnum, buf + offset, len); /* Configure endpoint */ if (is_in || hw_ep->is_shared_fifo) hw_ep->in_qh = qh; else hw_ep->out_qh = qh; - musb_ep_program(musb, epnum, urb, !is_in, buf, len); + musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); /* transmit may have more work: start it when it is time */ if (is_in) @@ -227,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: DBG(3, "check whether there's still time for periodic Tx\n"); - qh->iso_idx = 0; frame = musb_readw(mbase, MUSB_FRAME); /* FIXME this doesn't implement that scheduling policy ... * or handle framecounter wrapping @@ -256,7 +282,7 @@ start: if (!hw_ep->tx_channel) musb_h_tx_start(hw_ep); else if (is_cppi_enabled() || tusb_dma_omap()) - cppi_host_txdma_start(hw_ep); + musb_h_tx_dma_start(hw_ep); } } @@ -567,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) csr = musb_readw(ep->regs, MUSB_TXCSR); if (csr & MUSB_TXCSR_MODE) { musb_h_tx_flush_fifo(ep); + csr = musb_readw(ep->regs, MUSB_TXCSR); musb_writew(ep->regs, MUSB_TXCSR, - MUSB_TXCSR_FRCDATATOG); + csr | MUSB_TXCSR_FRCDATATOG); } - /* clear mode (and everything else) to enable Rx */ + + /* + * Clear the MODE bit (and everything else) to enable Rx. + * NOTE: we mustn't clear the DMAMODE bit before DMAENAB. + */ + if (csr & MUSB_TXCSR_DMAMODE) + musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ @@ -601,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) ep->rx_reinit = 0; } +static bool musb_tx_dma_program(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, struct musb_qh *qh, + struct urb *urb, u32 offset, u32 length) +{ + struct dma_channel *channel = hw_ep->tx_channel; + void __iomem *epio = hw_ep->regs; + u16 pkt_size = qh->maxpacket; + u16 csr; + u8 mode; + +#ifdef CONFIG_USB_INVENTRA_DMA + if (length > channel->max_len) + length = channel->max_len; + + csr = musb_readw(epio, MUSB_TXCSR); + if (length > pkt_size) { + mode = 1; + csr |= MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_DMAENAB; + } else { + mode = 0; + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); + csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ + } + channel->desired_mode = mode; + musb_writew(epio, MUSB_TXCSR, csr); +#else + if (!is_cppi_enabled() && !tusb_dma_omap()) + return false; + + channel->actual_len = 0; + + /* + * TX uses "RNDIS" mode automatically but needs help + * to identify the zero-length-final-packet case. + */ + mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; +#endif + + qh->segsize = length; + + if (!dma->channel_program(channel, pkt_size, mode, + urb->transfer_dma + offset, length)) { + dma->channel_release(channel); + hw_ep->tx_channel = NULL; + + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS); + return false; + } + return true; +} /* * Program an HDRC endpoint as per the given URB * Context: irqs blocked, controller lock held */ static void musb_ep_program(struct musb *musb, u8 epnum, - struct urb *urb, unsigned int is_out, - u8 *buf, u32 len) + struct urb *urb, int is_out, + u8 *buf, u32 offset, u32 len) { struct dma_controller *dma_controller; struct dma_channel *dma_channel; @@ -667,12 +754,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* general endpoint setup */ if (epnum) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* flush all old state, set default */ musb_h_tx_flush_fifo(hw_ep); + + /* + * We must not clear the DMAMODE bit before or in + * the same cycle with the DMAENAB bit, so we clear + * the latter first... + */ csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT - | MUSB_TXCSR_DMAMODE + | MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB | MUSB_TXCSR_FRCDATATOG | MUSB_TXCSR_H_RXSTALL | MUSB_TXCSR_H_ERROR @@ -680,24 +772,20 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (usb_gettoggle(urb->dev, - qh->epnum, 1)) + if (usb_gettoggle(urb->dev, qh->epnum, 1)) csr |= MUSB_TXCSR_H_WR_DATATOGGLE | MUSB_TXCSR_H_DATATOGGLE; else csr |= MUSB_TXCSR_CLRDATATOG; - /* twice in case of double packet buffering */ musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ + csr &= ~MUSB_TXCSR_DMAMODE; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); } else { /* endpoint 0: just flush */ - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, - csr | MUSB_CSR0_FLUSHFIFO); + musb_h_ep0_flush_fifo(hw_ep); } /* target addr and (for multipoint) hub addr/port */ @@ -734,113 +822,14 @@ static void musb_ep_program(struct musb *musb, u8 epnum, else load_count = min((u32) packet_sz, len); -#ifdef CONFIG_USB_INVENTRA_DMA - if (dma_channel) { - - /* clear previous state */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - qh->segsize = min(len, dma_channel->max_len); - - if (qh->segsize <= packet_sz) - dma_channel->desired_mode = 0; - else - dma_channel->desired_mode = 1; - - - if (dma_channel->desired_mode == 0) { - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE); - csr |= (MUSB_TXCSR_DMAENAB); - /* against programming guide */ - } else - csr |= (MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE); - - musb_writew(epio, MUSB_TXCSR, csr); - - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - dma_channel->desired_mode, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - if (is_out) - hw_ep->tx_channel = NULL; - else - hw_ep->rx_channel = NULL; - dma_channel = NULL; - } - } -#endif - - /* candidate for DMA */ - if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { - - /* program endpoint CSRs first, then setup DMA. - * assume CPPI setup succeeds. - * defer enabling dma. - */ - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_AUTOSET - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_DMAENAB); - csr |= MUSB_TXCSR_MODE; - musb_writew(epio, MUSB_TXCSR, - csr | MUSB_TXCSR_MODE); - - dma_channel->actual_len = 0L; - qh->segsize = len; - - /* TX uses "rndis" mode automatically, but needs help - * to identify the zero-length-final-packet case. - */ - dma_ok = dma_controller->channel_program( - dma_channel, packet_sz, - (urb->transfer_flags - & URB_ZERO_PACKET) - == URB_ZERO_PACKET, - urb->transfer_dma, - qh->segsize); - if (dma_ok) { - load_count = 0; - } else { - dma_controller->channel_release(dma_channel); - hw_ep->tx_channel = NULL; - dma_channel = NULL; - - /* REVISIT there's an error path here that - * needs handling: can't do dma, but - * there's no pio buffer address... - */ - } - } + if (dma_channel && musb_tx_dma_program(dma_controller, + hw_ep, qh, urb, offset, len)) + load_count = 0; if (load_count) { - /* ASSERT: TXCSR_DMAENAB was already cleared */ - /* PIO to load FIFO */ qh->segsize = load_count; musb_write_fifo(hw_ep, load_count, buf); - csr = musb_readw(epio, MUSB_TXCSR); - csr &= ~(MUSB_TXCSR_DMAENAB - | MUSB_TXCSR_DMAMODE - | MUSB_TXCSR_AUTOSET); - /* write CSR */ - csr |= MUSB_TXCSR_MODE; - - if (epnum) - musb_writew(epio, MUSB_TXCSR, csr); } /* re-enable interrupt */ @@ -895,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, dma_channel, packet_sz, !(urb->transfer_flags & URB_SHORT_NOT_OK), - urb->transfer_dma, + urb->transfer_dma + offset, qh->segsize); if (!dma_ok) { dma_controller->channel_release( @@ -1063,11 +1052,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr &= ~MUSB_CSR0_H_NAKTIMEOUT; musb_writew(epio, MUSB_CSR0, csr); } else { - csr |= MUSB_CSR0_FLUSHFIFO; - musb_writew(epio, MUSB_CSR0, csr); - musb_writew(epio, MUSB_CSR0, csr); - csr &= ~MUSB_CSR0_H_NAKTIMEOUT; - musb_writew(epio, MUSB_CSR0, csr); + musb_h_ep0_flush_fifo(hw_ep); } musb_writeb(epio, MUSB_NAKLIMIT0, 0); @@ -1081,10 +1066,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) * SHOULD NEVER HAPPEN! */ ERR("no URB for end 0\n"); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); - musb_writew(epio, MUSB_CSR0, 0); - + musb_h_ep0_flush_fifo(hw_ep); goto done; } @@ -1145,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) int pipe; bool done = false; u16 tx_csr; - size_t wLength = 0; - u8 *buf = NULL; + size_t length = 0; + size_t offset = 0; struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; @@ -1164,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* with CPPI, DMA sometimes triggers "extra" irqs */ if (!urb) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; } pipe = urb->pipe; @@ -1201,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - goto finish; + return; } if (status) { @@ -1233,29 +1215,89 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* second cppi case */ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); - goto finish; + return; + } + + if (is_dma_capable() && dma && !status) { + /* + * DMA has completed. But if we're using DMA mode 1 (multi + * packet DMA), we need a terminal TXPKTRDY interrupt before + * we can consider this transfer completed, lest we trash + * its last packet when writing the next URB's data. So we + * switch back to mode 0 to get that interrupt; we'll come + * back here once it happens. + */ + if (tx_csr & MUSB_TXCSR_DMAMODE) { + /* + * We shouldn't clear DMAMODE with DMAENAB set; so + * clear them in a safe order. That should be OK + * once TXPKTRDY has been set (and I've never seen + * it being 0 at this moment -- DMA interrupt latency + * is significant) but if it hasn't been then we have + * no choice but to stop being polite and ignore the + * programmer's guide... :-) + * + * Note that we must write TXCSR with TXPKTRDY cleared + * in order not to re-trigger the packet send (this bit + * can't be cleared by CPU), and there's another caveat: + * TXPKTRDY may be set shortly and then cleared in the + * double-buffered FIFO mode, so we do an extra TXCSR + * read for debouncing... + */ + tx_csr &= musb_readw(epio, MUSB_TXCSR); + if (tx_csr & MUSB_TXCSR_TXPKTRDY) { + tx_csr &= ~(MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + } + tx_csr &= ~(MUSB_TXCSR_DMAMODE | + MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, + tx_csr | MUSB_TXCSR_H_WZC_BITS); + + /* + * There is no guarantee that we'll get an interrupt + * after clearing DMAMODE as we might have done this + * too late (after TXPKTRDY was cleared by controller). + * Re-read TXCSR as we have spoiled its previous value. + */ + tx_csr = musb_readw(epio, MUSB_TXCSR); + } + /* + * We may get here from a DMA completion or TXPKTRDY interrupt. + * In any case, we must check the FIFO status here and bail out + * only if the FIFO still has data -- that should prevent the + * "missed" TXPKTRDY interrupts and deal with double-buffered + * FIFO mode too... + */ + if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) { + DBG(2, "DMA complete but packet still in FIFO, " + "CSR %04x\n", tx_csr); + return; + } } - /* REVISIT this looks wrong... */ if (!status || dma || usb_pipeisoc(pipe)) { if (dma) - wLength = dma->actual_len; + length = dma->actual_len; else - wLength = qh->segsize; - qh->offset += wLength; + length = qh->segsize; + qh->offset += length; if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = qh->segsize; + d->actual_length = length; + d->status = status; if (++qh->iso_idx >= urb->number_of_packets) { done = true; } else { d++; - buf = urb->transfer_buffer + d->offset; - wLength = d->length; + offset = d->offset; + length = d->length; } } else if (dma) { done = true; @@ -1268,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) & URB_ZERO_PACKET)) done = true; if (!done) { - buf = urb->transfer_buffer - + qh->offset; - wLength = urb->transfer_buffer_length - - qh->offset; + offset = qh->offset; + length = urb->transfer_buffer_length - offset; } } } @@ -1290,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) urb->status = status; urb->actual_length = qh->offset; musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT); + return; + } else if (usb_pipeisoc(pipe) && dma) { + if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, + offset, length)) + return; + } else if (tx_csr & MUSB_TXCSR_DMAENAB) { + DBG(1, "not complete, but DMA enabled?\n"); + return; + } - } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) { - /* WARN_ON(!buf); */ - - /* REVISIT: some docs say that when hw_ep->tx_double_buffered, - * (and presumably, fifo is not half-full) we should write TWO - * packets before updating TXCSR ... other docs disagree ... - */ - /* PIO: start next packet in this URB */ - if (wLength > qh->maxpacket) - wLength = qh->maxpacket; - musb_write_fifo(hw_ep, wLength, buf); - qh->segsize = wLength; - - musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_TXCSR, - MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); - } else - DBG(1, "not complete, but dma enabled?\n"); + /* + * PIO: start next packet in this URB. + * + * REVISIT: some docs say that when hw_ep->tx_double_buffered, + * (and presumably, FIFO is not half-full) we should write *two* + * packets before updating TXCSR; other docs disagree... + */ + if (length > qh->maxpacket) + length = qh->maxpacket; + musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); + qh->segsize = length; -finish: - return; + musb_ep_select(mbase, epnum); + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); } @@ -1841,7 +1884,7 @@ static int musb_urb_enqueue( unsigned long flags; struct musb *musb = hcd_to_musb(hcd); struct usb_host_endpoint *hep = urb->ep; - struct musb_qh *qh = hep->hcpriv; + struct musb_qh *qh; struct usb_endpoint_descriptor *epd = &hep->desc; int ret; unsigned type_reg; @@ -1853,22 +1896,21 @@ static int musb_urb_enqueue( spin_lock_irqsave(&musb->lock, flags); ret = usb_hcd_link_urb_to_ep(hcd, urb); + qh = ret ? NULL : hep->hcpriv; + if (qh) + urb->hcpriv = qh; spin_unlock_irqrestore(&musb->lock, flags); - if (ret) - return ret; /* DMA mapping was already done, if needed, and this urb is on - * hep->urb_list ... so there's little to do unless hep wasn't - * yet scheduled onto a live qh. + * hep->urb_list now ... so we're done, unless hep wasn't yet + * scheduled onto a live qh. * * REVISIT best to keep hep->hcpriv valid until the endpoint gets * disabled, testing for empty qh->ring and avoiding qh setup costs * except for the first urb queued after a config change. */ - if (qh) { - urb->hcpriv = qh; - return 0; - } + if (qh || ret) + return ret; /* Allocate and initialize qh, minimizing the work done each time * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it. @@ -2044,7 +2086,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) * endpoint's irq status here to avoid bogus irqs. * clearing that status is platform-specific... */ - } else { + } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); csr &= ~(MUSB_TXCSR_AUTOSET @@ -2058,6 +2100,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) musb_writew(epio, MUSB_TXCSR, csr); /* flush cpu writebuffer */ csr = musb_readw(epio, MUSB_TXCSR); + } else { + musb_h_ep0_flush_fifo(ep); } if (status == 0) musb_advance_schedule(ep->musb, urb, ep, is_in); diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 8662e9e159c3..5e83f96d6b77 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel) void __iomem *mbase = musb_channel->controller->base; u8 bchannel = musb_channel->idx; + int offset; u16 csr; if (channel->status == MUSB_DMA_STATUS_BUSY) { if (musb_channel->transmit) { - - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_TXCSR)); - csr &= ~(MUSB_TXCSR_AUTOSET | - MUSB_TXCSR_DMAENAB | - MUSB_TXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR), - csr); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_TXCSR); + + /* + * The programming guide says that we must clear + * the DMAENAB bit before the DMAMODE bit... + */ + csr = musb_readw(mbase, offset); + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); + musb_writew(mbase, offset, csr); + csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(mbase, offset, csr); } else { - csr = musb_readw(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, - MUSB_RXCSR)); + offset = MUSB_EP_OFFSET(musb_channel->epnum, + MUSB_RXCSR); + + csr = musb_readw(mbase, offset); csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); - musb_writew(mbase, - MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR), - csr); + musb_writew(mbase, offset, csr); } musb_writew(mbase, @@ -296,20 +298,28 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) && ((channel->desired_mode == 0) || (channel->actual_len & (musb_channel->max_packet_sz - 1))) - ) { + ) { + u8 epnum = musb_channel->epnum; + int offset = MUSB_EP_OFFSET(epnum, + MUSB_TXCSR); + u16 txcsr; + + /* + * The programming guide says that we + * must clear DMAENAB before DMAMODE. + */ + musb_ep_select(mbase, epnum); + txcsr = musb_readw(mbase, offset); + txcsr &= ~(MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_AUTOSET); + musb_writew(mbase, offset, txcsr); /* Send out the packet */ - musb_ep_select(mbase, - musb_channel->epnum); - musb_writew(mbase, MUSB_EP_OFFSET( - musb_channel->epnum, - MUSB_TXCSR), - MUSB_TXCSR_TXPKTRDY); - } else { - musb_dma_completion( - musb, - musb_channel->epnum, - musb_channel->transmit); + txcsr &= ~MUSB_TXCSR_DMAMODE; + txcsr |= MUSB_TXCSR_TXPKTRDY; + musb_writew(mbase, offset, txcsr); } + musb_dma_completion(musb, musb_channel->epnum, + musb_channel->transmit); } } } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index dcc87aaa8628..8100f1d25904 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(DE_VID, WHT_PID) }, { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index daaf63db0b50..c09f658a448b 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -913,6 +913,13 @@ #define ADI_GNICE_PID 0xF000 /* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index 2e8e05462ef7..b66b71ccd12b 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ + { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d560c0b54e6e..47bd070f24b7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial); #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 +#define DLINK_VENDOR_ID 0x1186 +#define DLINK_PRODUCT_DWM_652 0x3e04 + + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index e6d6b0c17fd9..7528b8d57f1c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ + {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */ + {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ + {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */ + {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ + {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5be54c019662..ef7e5a8ceab5 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,8 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ ifeq ($(CONFIG_USB_LIBUSUAL),) usb-storage-objs += usual-tables.o else - obj-$(CONFIG_USB) += libusual.o usual-tables.o + obj-$(CONFIG_USB) += usb-libusual.o + usb-libusual-objs := libusual.o usual-tables.o endif obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 49aedb36dc19..fcb320217218 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) USB_ENDPOINT_HALT, endp, NULL, 0, 3*HZ); - /* reset the endpoint toggle */ if (result >= 0) - usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 0); + usb_reset_endpoint(us->pusb_dev, endp); US_DEBUGP("%s: result = %d\n", __func__, result); return result; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1c1f643e8a78..96db479d1165 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -975,12 +975,14 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), -/* Reported by Rauch Wolke <rauchwolke@gmx.net> */ +/* Reported by Rauch Wolke <rauchwolke@gmx.net> + * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882) + */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, "Simple Tech/Datafab", "CF+SM Reader", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), + US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ), /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant * to the USB storage specification in two ways: @@ -1376,6 +1378,14 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +/* Reported by Pascal Terjan <pterjan@mandriva.com> + * Ignore driver CD mode and force into modem mode by default. + */ +UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000, + "D-Link", + "USB Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), + /* Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 386eaa22d215..4ac4300a3f9a 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work) mutex_lock(&wusbhc->mutex); wusbhc_devconnect_acked(wusbhc, wusb_dev); mutex_unlock(&wusbhc->mutex); + + wusb_dev_put(wusb_dev); } /* @@ -396,7 +398,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, /* After a device disconnects, change the GTK (see [WUSB] * section 6.2.11.2). */ - wusbhc_gtk_rekey(wusbhc); + if (wusbhc->active) + wusbhc_gtk_rekey(wusbhc); /* The Wireless USB part has forgotten about the device already; now * khubd's timer will pick up the disconnection and remove the USB @@ -1084,15 +1087,21 @@ error_mmcie_set: * wusbhc_devconnect_stop - stop managing connected devices * @wusbhc: the WUSB HC * - * Removes the Host Info IE and stops the keep alives. - * - * FIXME: should this disconnect all devices? + * Disconnects any devices still connected, stops the keep alives and + * removes the Host Info IE. */ void wusbhc_devconnect_stop(struct wusbhc *wusbhc) { - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - WARN_ON(!list_empty(&wusbhc->cack_list)); + int i; + mutex_lock(&wusbhc->mutex); + for (i = 0; i < wusbhc->ports_max; i++) { + if (wusbhc->port[i].wusb_dev) + __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); + } + mutex_unlock(&wusbhc->mutex); + + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); kfree(wusbhc->wuie_host_info); wusbhc->wuie_host_info = NULL; diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 07c63a31c799..ee6256f23636 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, wusb_trust_timeout_store); /* - * Show & store the current WUSB CHID + * Show the current WUSB CHID. */ static ssize_t wusb_chid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + const struct wusb_ckhdid *chid; ssize_t result = 0; if (wusbhc->wuie_host_info != NULL) - result += ckhdid_printf(buf, PAGE_SIZE, - &wusbhc->wuie_host_info->CHID); + chid = &wusbhc->wuie_host_info->CHID; + else + chid = &wusb_ckhdid_zero; + + result += ckhdid_printf(buf, PAGE_SIZE, chid); + result += sprintf(buf + result, "\n"); + return result; } /* - * Store a new CHID - * - * This will (FIXME) trigger many changes. - * - * - Send an all zeros CHID and it will stop the controller - * - Send a non-zero CHID and it will start it - * (unless it was started, it will just change the CHID, - * diconnecting all devices first). + * Store a new CHID. * - * So first we scan the MMC we are sent and then we act on it. We - * read it in the same format as we print it, an ASCII string of 16 - * hex bytes. + * - Write an all zeros CHID and it will stop the controller + * - Write a non-zero CHID and it will start it. * * See wusbhc_chid_set() for more info. */ @@ -339,13 +337,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) { struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (status == 0) { + if (status == 0 && wusb_dev) { wusb_dev->entry_ts = jiffies; - /* wusbhc_devconnect_acked() can't be called from from + /* wusbhc_devconnect_acked() can't be called from atomic context so defer it to a work queue. */ if (!list_empty(&wusb_dev->cack_node)) queue_work(wusbd, &wusb_dev->devconnect_acked_work); + else + wusb_dev_put(wusb_dev); } usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); diff --git a/fs/afs/file.c b/fs/afs/file.c index 7a1d942ef68d..0149dab365e7 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -102,6 +102,7 @@ int afs_release(struct inode *inode, struct file *file) return 0; } +#ifdef CONFIG_AFS_FSCACHE /* * deal with notification that a page was read from the cache */ @@ -117,6 +118,7 @@ static void afs_file_readpage_read_complete(struct page *page, SetPageUptodate(page); unlock_page(page); } +#endif /* * AFS read page from file, directory or symlink diff --git a/fs/buffer.c b/fs/buffer.c index ff8bb1f2333a..b3e5be7514f5 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -360,7 +360,7 @@ still_busy: * Completion handler for block_write_full_page() - pages which are unlocked * during I/O, and which have PageWriteback cleared upon I/O completion. */ -static void end_buffer_async_write(struct buffer_head *bh, int uptodate) +void end_buffer_async_write(struct buffer_head *bh, int uptodate) { char b[BDEVNAME_SIZE]; unsigned long flags; @@ -438,11 +438,17 @@ static void mark_buffer_async_read(struct buffer_head *bh) set_buffer_async_read(bh); } -void mark_buffer_async_write(struct buffer_head *bh) +void mark_buffer_async_write_endio(struct buffer_head *bh, + bh_end_io_t *handler) { - bh->b_end_io = end_buffer_async_write; + bh->b_end_io = handler; set_buffer_async_write(bh); } + +void mark_buffer_async_write(struct buffer_head *bh) +{ + mark_buffer_async_write_endio(bh, end_buffer_async_write); +} EXPORT_SYMBOL(mark_buffer_async_write); @@ -1615,7 +1621,8 @@ EXPORT_SYMBOL(unmap_underlying_metadata); * unplugging the device queue. */ static int __block_write_full_page(struct inode *inode, struct page *page, - get_block_t *get_block, struct writeback_control *wbc) + get_block_t *get_block, struct writeback_control *wbc, + bh_end_io_t *handler) { int err; sector_t block; @@ -1700,7 +1707,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page, continue; } if (test_clear_buffer_dirty(bh)) { - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { unlock_buffer(bh); } @@ -1753,7 +1760,7 @@ recover: if (buffer_mapped(bh) && buffer_dirty(bh) && !buffer_delay(bh)) { lock_buffer(bh); - mark_buffer_async_write(bh); + mark_buffer_async_write_endio(bh, handler); } else { /* * The buffer may have been set dirty during @@ -2679,7 +2686,8 @@ int nobh_writepage(struct page *page, get_block_t *get_block, out: ret = mpage_writepage(page, get_block, wbc); if (ret == -EAGAIN) - ret = __block_write_full_page(inode, page, get_block, wbc); + ret = __block_write_full_page(inode, page, get_block, wbc, + end_buffer_async_write); return ret; } EXPORT_SYMBOL(nobh_writepage); @@ -2837,9 +2845,10 @@ out: /* * The generic ->writepage function for buffer-backed address_spaces + * this form passes in the end_io handler used to finish the IO. */ -int block_write_full_page(struct page *page, get_block_t *get_block, - struct writeback_control *wbc) +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler) { struct inode * const inode = page->mapping->host; loff_t i_size = i_size_read(inode); @@ -2848,7 +2857,8 @@ int block_write_full_page(struct page *page, get_block_t *get_block, /* Is the page fully inside i_size? */ if (page->index < end_index) - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, + handler); /* Is the page fully outside i_size? (truncate in progress) */ offset = i_size & (PAGE_CACHE_SIZE-1); @@ -2871,9 +2881,20 @@ int block_write_full_page(struct page *page, get_block_t *get_block, * writes to that region are not written out to the file." */ zero_user_segment(page, offset, PAGE_CACHE_SIZE); - return __block_write_full_page(inode, page, get_block, wbc); + return __block_write_full_page(inode, page, get_block, wbc, handler); } +/* + * The generic ->writepage function for buffer-backed address_spaces + */ +int block_write_full_page(struct page *page, get_block_t *get_block, + struct writeback_control *wbc) +{ + return block_write_full_page_endio(page, get_block, wbc, + end_buffer_async_write); +} + + sector_t generic_block_bmap(struct address_space *mapping, sector_t block, get_block_t *get_block) { @@ -3342,9 +3363,11 @@ EXPORT_SYMBOL(block_read_full_page); EXPORT_SYMBOL(block_sync_page); EXPORT_SYMBOL(block_truncate_page); EXPORT_SYMBOL(block_write_full_page); +EXPORT_SYMBOL(block_write_full_page_endio); EXPORT_SYMBOL(cont_write_begin); EXPORT_SYMBOL(end_buffer_read_sync); EXPORT_SYMBOL(end_buffer_write_sync); +EXPORT_SYMBOL(end_buffer_async_write); EXPORT_SYMBOL(file_fsync); EXPORT_SYMBOL(generic_block_bmap); EXPORT_SYMBOL(generic_cont_expand_simple); diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig index d0a69ff25375..182f9ffe2b51 100644 --- a/fs/fat/Kconfig +++ b/fs/fat/Kconfig @@ -95,3 +95,6 @@ config FAT_DEFAULT_IOCHARSET Note that "utf8" is not recommended for FAT filesystems. If unsure, you shouldn't set "utf8" here. See <file:Documentation/filesystems/vfat.txt> for more information. + + Enable any character sets you need in File Systems/Native Language + Support. diff --git a/fs/proc/base.c b/fs/proc/base.c index f71559784bfb..aa763ab00777 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -648,14 +648,14 @@ static unsigned mounts_poll(struct file *file, poll_table *wait) { struct proc_mounts *p = file->private_data; struct mnt_namespace *ns = p->ns; - unsigned res = 0; + unsigned res = POLLIN | POLLRDNORM; poll_wait(file, &ns->poll, wait); spin_lock(&vfsmount_lock); if (p->event != ns->event) { p->event = ns->event; - res = POLLERR; + res |= POLLERR | POLLPRI; } spin_unlock(&vfsmount_lock); diff --git a/fs/splice.c b/fs/splice.c index 5384a90665d0..666953d59a35 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -614,7 +614,6 @@ static void wakeup_pipe_writers(struct pipe_inode_info *pipe) * @actor: handler that splices the data * * Description: - * This function loops over the pipe and calls @actor to do the * actual moving of a single struct pipe_buffer to the desired * destination. It returns when there's no more buffers left in @@ -711,7 +710,7 @@ EXPORT_SYMBOL(splice_from_pipe_next); /** * splice_from_pipe_begin - start splicing from pipe - * @pipe: pipe to splice from + * @sd: information about the splice operation * * Description: * This function should be called before a loop containing diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 289c43a47263..b1606e07b7a3 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -446,11 +446,11 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait) if (buffer->event != atomic_read(&od->event)) goto trigger; - return 0; + return DEFAULT_POLLMASK; trigger: buffer->needs_read_fill = 1; - return POLLERR|POLLPRI; + return DEFAULT_POLLMASK|POLLERR|POLLPRI; } void sysfs_notify_dirent(struct sysfs_dirent *sd) @@ -667,6 +667,7 @@ struct sysfs_schedule_callback_struct { struct work_struct work; }; +static struct workqueue_struct *sysfs_workqueue; static DEFINE_MUTEX(sysfs_workq_mutex); static LIST_HEAD(sysfs_workq); static void sysfs_schedule_callback_work(struct work_struct *work) @@ -715,11 +716,20 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list) if (ss->kobj == kobj) { + module_put(owner); mutex_unlock(&sysfs_workq_mutex); return -EAGAIN; } mutex_unlock(&sysfs_workq_mutex); + if (sysfs_workqueue == NULL) { + sysfs_workqueue = create_workqueue("sysfsd"); + if (sysfs_workqueue == NULL) { + module_put(owner); + return -ENOMEM; + } + } + ss = kmalloc(sizeof(*ss), GFP_KERNEL); if (!ss) { module_put(owner); @@ -735,7 +745,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_add_tail(&ss->workq_list, &sysfs_workq); mutex_unlock(&sysfs_workq_mutex); - schedule_work(&ss->work); + queue_work(sysfs_workqueue, &ss->work); return 0; } EXPORT_SYMBOL_GPL(sysfs_schedule_callback); diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore deleted file mode 100644 index e02c15d158fc..000000000000 --- a/include/asm-arm/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -arch -mach-types.h diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 37b82cb96c89..e727fe0d1451 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -88,7 +88,7 @@ extern void warn_slowpath(const char *file, const int line, #else /* !CONFIG_BUG */ #ifndef HAVE_ARCH_BUG -#define BUG() +#define BUG() do {} while(0) #endif #ifndef HAVE_ARCH_BUG_ON diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 7b73bb8f1970..16ed0284d780 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long, unsigned long b_state); void end_buffer_read_sync(struct buffer_head *bh, int uptodate); void end_buffer_write_sync(struct buffer_head *bh, int uptodate); +void end_buffer_async_write(struct buffer_head *bh, int uptodate); /* Things to do with buffers at mapping->private_list */ void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode); @@ -197,6 +198,8 @@ extern int buffer_heads_over_limit; void block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler); int block_read_full_page(struct page*, get_block_t*); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from); diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index baabf33be244..a0d9422a1569 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " pr_fmt(fmt),\ + KBUILD_MODNAME ": " fmt, \ ##__VA_ARGS__); \ } while (0) diff --git a/include/linux/init.h b/include/linux/init.h index 68cb0265d009..f121a7a10c3d 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -247,6 +247,7 @@ struct obs_kernel_param { /* Relies on boot_command_line being set */ void __init parse_early_param(void); +void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d9e75ec7def5..883cd44ff765 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ diff --git a/include/linux/libata.h b/include/linux/libata.h index b450a2628855..3d501db36a26 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ @@ -225,6 +226,9 @@ enum { ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -689,7 +693,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a4b034..97e40cb6b588 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76e470a299bf..72736fd8223c 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver, #define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev) #define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data)) +/* early platform driver interface */ +struct early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf); +extern void early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void early_platform_driver_register_all(char *class_str); +extern int early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); +extern void early_platform_cleanup(void); + + +#ifndef MODULE +#define early_platform_init(class_string, platform_driver) \ +static __initdata struct early_platform_driver early_driver = { \ + .class_str = class_string, \ + .pdrv = platform_driver, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init early_platform_driver_setup_func(char *buf) \ +{ \ + return early_platform_driver_register(&early_driver, buf); \ +} \ +early_param(class_string, early_platform_driver_setup_func) +#else /* MODULE */ +#define early_platform_init(class_string, platform_driver) +#endif /* MODULE */ + #endif /* _PLATFORM_DEVICE_H_ */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 0cdda00f2b2a..58b2aa5312b9 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -161,9 +161,8 @@ struct rcu_data { unsigned long offline_fqs; /* Kicked due to being offline. */ unsigned long resched_ipi; /* Sent a resched IPI. */ - /* 5) state to allow this CPU to force_quiescent_state on others */ + /* 5) For future __rcu_pending statistics. */ long n_rcu_pending; /* rcu_pending() calls since boot. */ - long n_rcu_pending_force_qs; /* when to force quiescent states. */ int cpu; }; diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 05eab2f11e63..2ea20320c093 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -51,5 +51,6 @@ struct ads7846_platform_data { void **filter_data); int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); + void (*wait_for_sync)(void); }; diff --git a/include/linux/usb.h b/include/linux/usb.h index c6b2ab41b908..3aa2cd1f8d08 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index, extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); @@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io); #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - - static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { diff --git a/include/net/udp.h b/include/net/udp.h index 93dbe294d459..90e6ce56be65 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -124,8 +124,6 @@ static inline void udp_lib_close(struct sock *sk, long timeout) sk_common_release(sk); } -extern int ipv4_rcv_saddr_equal(const struct sock *sk1, - const struct sock *sk2); extern int udp_lib_get_port(struct sock *sk, unsigned short snum, int (*)(const struct sock*,const struct sock*)); diff --git a/init/main.c b/init/main.c index 3585f073d636..3bbf93be744c 100644 --- a/init/main.c +++ b/init/main.c @@ -492,6 +492,11 @@ static int __init do_early_param(char *param, char *val) return 0; } +void __init parse_early_options(char *cmdline) +{ + parse_args("early options", cmdline, NULL, 0, do_early_param); +} + /* Arch code calls this early on, or if not, just before other parsing. */ void __init parse_early_param(void) { @@ -503,7 +508,7 @@ void __init parse_early_param(void) /* All fall through to do_early_param. */ strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); - parse_args("early options", tmp_cmdline, NULL, 0, do_early_param); + parse_early_options(tmp_cmdline); done = 1; } diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 2c7b8457d0d2..a967c9feb90a 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -58,6 +58,10 @@ static DEFINE_MUTEX(rcu_barrier_mutex); static struct completion rcu_barrier_completion; int rcu_scheduler_active __read_mostly; +static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0); +static struct rcu_head rcu_migrate_head[3]; +static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq); + /* * Awaken the corresponding synchronize_rcu() instance now that a * grace period has elapsed. @@ -122,7 +126,10 @@ static void rcu_barrier_func(void *type) } } -static inline void wait_migrated_callbacks(void); +static inline void wait_migrated_callbacks(void) +{ + wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count)); +} /* * Orchestrate the specified type of RCU barrier, waiting for all @@ -179,21 +186,12 @@ void rcu_barrier_sched(void) } EXPORT_SYMBOL_GPL(rcu_barrier_sched); -static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0); -static struct rcu_head rcu_migrate_head[3]; -static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq); - static void rcu_migrate_callback(struct rcu_head *notused) { if (atomic_dec_and_test(&rcu_migrate_type_count)) wake_up(&rcu_migrate_wq); } -static inline void wait_migrated_callbacks(void) -{ - wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count)); -} - static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self, unsigned long action, void *hcpu) { diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 7f3266922572..d2a372fb0b9b 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -530,8 +530,6 @@ static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp) rdp->qs_pending = 1; rdp->passed_quiesc = 0; rdp->gpnum = rsp->gpnum; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; } /* @@ -578,8 +576,6 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) rsp->gpnum++; rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */ rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; record_gp_stall_check_time(rsp); dyntick_record_completed(rsp, rsp->completed - 1); note_new_gpnum(rsp, rdp); @@ -1055,7 +1051,6 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) { unsigned long flags; long lastcomp; - struct rcu_data *rdp = rsp->rda[smp_processor_id()]; struct rcu_node *rnp = rcu_get_root(rsp); u8 signaled; @@ -1066,16 +1061,13 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) return; /* Someone else is already on the job. */ } if (relaxed && - (long)(rsp->jiffies_force_qs - jiffies) >= 0 && - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0) + (long)(rsp->jiffies_force_qs - jiffies) >= 0) goto unlock_ret; /* no emergency and done recently. */ rsp->n_force_qs++; spin_lock(&rnp->lock); lastcomp = rsp->completed; signaled = rsp->signaled; rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; - rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + - RCU_JIFFIES_TILL_FORCE_QS; if (lastcomp == rsp->gpnum) { rsp->n_force_qs_ngp++; spin_unlock(&rnp->lock); @@ -1144,8 +1136,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) * If an RCU GP has gone long enough, go check for dyntick * idle CPUs and, if needed, send resched IPIs. */ - if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); /* @@ -1230,8 +1221,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), if (unlikely(++rdp->qlen > qhimark)) { rdp->blimit = LONG_MAX; force_quiescent_state(rsp, 0); - } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); } @@ -1290,8 +1280,7 @@ static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp) /* Has an RCU GP gone long enough to send resched IPIs &c? */ if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) && - ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || - (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)) + ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) return 1; /* nothing to do */ diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 4ee954f6a8d5..4b1875ba9404 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -49,14 +49,12 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x", + seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? '!' : ' ', rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - (int)(rdp->n_rcu_pending & 0xffff)); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, " dt=%d/%d dn=%d df=%lu", rdp->dynticks->dynticks, @@ -102,14 +100,12 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) return; - seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld", + seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d", rdp->cpu, cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"", rdp->completed, rdp->gpnum, rdp->passed_quiesc, rdp->passed_quiesc_completed, - rdp->qs_pending, - rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, - rdp->n_rcu_pending); + rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, ",%d,%d,%d,%lu", rdp->dynticks->dynticks, @@ -123,7 +119,7 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) static int show_rcudata_csv(struct seq_file *m, void *unused) { - seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\","); + seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\","); #ifdef CONFIG_NO_HZ seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ diff --git a/kernel/sched.c b/kernel/sched.c index 5724508c3b66..b902e587a3a0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4846,7 +4846,7 @@ void scheduler_tick(void) #endif } -unsigned long get_parent_ip(unsigned long addr) +notrace unsigned long get_parent_ip(unsigned long addr) { if (in_lock_functions(addr)) { addr = CALLER_ADDR2; @@ -7367,8 +7367,12 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpumask_or(groupmask, groupmask, sched_group_cpus(group)); cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); - printk(KERN_CONT " %s (__cpu_power = %d)", str, - group->__cpu_power); + + printk(KERN_CONT " %s", str); + if (group->__cpu_power != SCHED_LOAD_SCALE) { + printk(KERN_CONT " (__cpu_power = %d)", + group->__cpu_power); + } group = group->next; } while (group != sd->groups); diff --git a/kernel/softirq.c b/kernel/softirq.c index 2fecefacdc5b..b525dd348511 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -472,9 +472,9 @@ void tasklet_kill(struct tasklet_struct *t) printk("Attempt to kill tasklet from interrupt\n"); while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) { - do + do { yield(); - while (test_bit(TASKLET_STATE_SCHED, &t->state)); + } while (test_bit(TASKLET_STATE_SCHED, &t->state)); } tasklet_unlock_wait(t); clear_bit(TASKLET_STATE_SCHED, &t->state); diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c index ad8c22efff41..8333715e4066 100644 --- a/kernel/trace/trace_branch.c +++ b/kernel/trace/trace_branch.c @@ -155,6 +155,13 @@ static enum print_line_t trace_branch_print(struct trace_iterator *iter, return TRACE_TYPE_HANDLED; } +static void branch_print_header(struct seq_file *s) +{ + seq_puts(s, "# TASK-PID CPU# TIMESTAMP CORRECT" + " FUNC:FILE:LINE\n"); + seq_puts(s, "# | | | | | " + " |\n"); +} static struct trace_event trace_branch_event = { .type = TRACE_BRANCH, @@ -169,6 +176,7 @@ static struct tracer branch_trace __read_mostly = #ifdef CONFIG_FTRACE_SELFTEST .selftest = trace_selftest_startup_branch, #endif /* CONFIG_FTRACE_SELFTEST */ + .print_header = branch_print_header, }; __init static int init_branch_tracer(void) diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c index bae791ebcc51..118439709fb7 100644 --- a/kernel/trace/trace_power.c +++ b/kernel/trace/trace_power.c @@ -186,6 +186,12 @@ static enum print_line_t power_print_line(struct trace_iterator *iter) return TRACE_TYPE_UNHANDLED; } +static void power_print_header(struct seq_file *s) +{ + seq_puts(s, "# TIMESTAMP STATE EVENT\n"); + seq_puts(s, "# | | |\n"); +} + static struct tracer power_tracer __read_mostly = { .name = "power", @@ -194,6 +200,7 @@ static struct tracer power_tracer __read_mostly = .stop = stop_power_trace, .reset = power_trace_reset, .print_line = power_print_line, + .print_header = power_print_header, }; static int init_power_trace(void) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 97a777ad4f59..920a3ca6e259 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -258,7 +258,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, goto exit; retval = call_usermodehelper(argv[0], argv, - env->envp, UMH_NO_WAIT); + env->envp, UMH_WAIT_EXEC); } exit: @@ -328,7 +328,7 @@ static int __init kobject_uevent_init(void) "kobject_uevent: unable to create netlink socket!\n"); return -ENODEV; } - + netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV); return 0; } diff --git a/mm/filemap.c b/mm/filemap.c index 8bd498040f32..379ff0bcbf6e 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -441,6 +441,7 @@ int filemap_write_and_wait_range(struct address_space *mapping, } return err; } +EXPORT_SYMBOL(filemap_write_and_wait_range); /** * add_to_page_cache_locked - add a locked page to the pagecache diff --git a/mm/mmap.c b/mm/mmap.c index 4a3841186c11..3303d1ba8e87 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1575,7 +1575,7 @@ static int acct_stack_growth(struct vm_area_struct *vma, unsigned long size, uns * Overcommit.. This must be the final test, as it will * update security statistics. */ - if (security_vm_enough_memory(grow)) + if (security_vm_enough_memory_mm(mm, grow)) return -ENOMEM; /* Ok, everything looks good - let it rip */ diff --git a/net/802/tr.c b/net/802/tr.c index e7eb13084d71..e874447ad144 100644 --- a/net/802/tr.c +++ b/net/802/tr.c @@ -561,6 +561,9 @@ static int rif_seq_show(struct seq_file *seq, void *v) } seq_putc(seq, '\n'); } + + if (dev) + dev_put(dev); } return 0; } diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 654e45f5719d..c67fe6f75653 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -121,8 +121,10 @@ int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, if (!skb) return NET_RX_DROP; - if (netpoll_rx_on(skb)) + if (netpoll_rx_on(skb)) { + skb->protocol = eth_type_trans(skb, skb->dev); return vlan_hwaccel_receive_skb(skb, grp, vlan_tci); + } return napi_frags_finish(napi, skb, vlan_gro_common(napi, grp, vlan_tci, skb)); diff --git a/net/core/dev.c b/net/core/dev.c index 91d792d17e09..343883f65ea7 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1430,7 +1430,7 @@ void netif_device_detach(struct net_device *dev) { if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) && netif_running(dev)) { - netif_stop_queue(dev); + netif_tx_stop_all_queues(dev); } } EXPORT_SYMBOL(netif_device_detach); @@ -1445,7 +1445,7 @@ void netif_device_attach(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) && netif_running(dev)) { - netif_wake_queue(dev); + netif_tx_wake_all_queues(dev); __netdev_watchdog_up(dev); } } @@ -2328,8 +2328,10 @@ static int napi_gro_complete(struct sk_buff *skb) struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK]; int err = -ENOENT; - if (NAPI_GRO_CB(skb)->count == 1) + if (NAPI_GRO_CB(skb)->count == 1) { + skb_shinfo(skb)->gso_size = 0; goto out; + } rcu_read_lock(); list_for_each_entry_rcu(ptype, head, list) { @@ -2348,7 +2350,6 @@ static int napi_gro_complete(struct sk_buff *skb) } out: - skb_shinfo(skb)->gso_size = 0; return netif_receive_skb(skb); } diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2bc8e27a163d..c96a6bb25430 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -928,6 +928,8 @@ static void tcp_init_metrics(struct sock *sk) tcp_set_rto(sk); if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp) goto reset; + +cwnd: tp->snd_cwnd = tcp_init_cwnd(tp, dst); tp->snd_cwnd_stamp = tcp_time_stamp; return; @@ -942,6 +944,7 @@ reset: tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT; inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT; } + goto cwnd; } static void tcp_update_reordering(struct sock *sk, const int metric, diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index bda08a09357d..7a1d1ce22e66 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -222,7 +222,7 @@ fail: return error; } -int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2) +static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2) { struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2); @@ -1823,7 +1823,6 @@ EXPORT_SYMBOL(udp_lib_getsockopt); EXPORT_SYMBOL(udp_lib_setsockopt); EXPORT_SYMBOL(udp_poll); EXPORT_SYMBOL(udp_lib_get_port); -EXPORT_SYMBOL(ipv4_rcv_saddr_equal); #ifdef CONFIG_PROC_FS EXPORT_SYMBOL(udp_proc_register); diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index d31df0f4bc9a..a7fdf9a27f15 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -380,10 +380,6 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, default: goto sticky_done; } - - if ((rthdr->hdrlen & 1) || - (rthdr->hdrlen >> 1) != rthdr->segments_left) - goto sticky_done; } retv = 0; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 6842dd2edd5b..8905712cfbb8 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -53,6 +53,8 @@ int ipv6_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2) { const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr; const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2); + __be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr; + __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2); int sk_ipv6only = ipv6_only_sock(sk); int sk2_ipv6only = inet_v6_ipv6only(sk2); int addr_type = ipv6_addr_type(sk_rcv_saddr6); @@ -60,7 +62,9 @@ int ipv6_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2) /* if both are mapped, treat as IPv4 */ if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED) - return ipv4_rcv_saddr_equal(sk, sk2); + return (!sk2_ipv6only && + (!sk_rcv_saddr || !sk2_rcv_saddr || + sk_rcv_saddr == sk2_rcv_saddr)); if (addr_type2 == IPV6_ADDR_ANY && !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED)) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 74776de523ec..f546e81acc45 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1758,8 +1758,9 @@ static void free_pg_vec(char **pg_vec, unsigned int order, unsigned int len) static inline char *alloc_one_pg_vec_page(unsigned long order) { - return (char *) __get_free_pages(GFP_KERNEL | __GFP_COMP | __GFP_ZERO, - order); + gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN; + + return (char *) __get_free_pages(gfp_flags, order); } static char **alloc_pg_vec(struct tpacket_req *req, int order) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 0f36e8d59b29..877a7f65f707 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1072,10 +1072,6 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock, unsigned char *asmptr; int n, size, qbit = 0; - /* ROSE empty frame has no meaning : don't send */ - if (len == 0) - return 0; - if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT)) return -EINVAL; @@ -1273,12 +1269,6 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock, skb_reset_transport_header(skb); copied = skb->len; - /* ROSE empty frame has no meaning : ignore it */ - if (copied == 0) { - skb_free_datagram(sk, skb); - return copied; - } - if (copied > size) { copied = size; msg->msg_flags |= MSG_TRUNC; diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c index 72cf86e3c090..fad596bf32d7 100644 --- a/net/sched/em_meta.c +++ b/net/sched/em_meta.c @@ -176,8 +176,10 @@ META_COLLECTOR(var_dev) META_COLLECTOR(int_vlan_tag) { - unsigned short uninitialized_var(tag); - if (vlan_get_tag(skb, &tag) < 0) + unsigned short tag; + + tag = vlan_tx_tag_get(skb); + if (!tag && __vlan_get_tag(skb, &tag)) *err = -1; else dst->value = tag; |