diff options
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 9 | ||||
| -rw-r--r-- | include/linux/interrupt.h | 47 | ||||
| -rw-r--r-- | include/linux/irq.h | 55 | ||||
| -rw-r--r-- | include/linux/signal.h | 26 |
4 files changed, 83 insertions, 54 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1cbbb8e28999..99f219a01e0e 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -257,3 +257,12 @@ Why: Code does no longer build since at least 2.6.0, apparently there is Who: Ralf Baechle <ralf@linux-mips.org> --------------------------- + +What: Interrupt only SA_* flags +When: Januar 2007 +Why: The interrupt related SA_* flags are replaced by IRQF_* to move them + out of the signal namespace. + +Who: Thomas Gleixner <tglx@linutronix.de> + +--------------------------- diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index db2a63a11633..cf682a73a6f9 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -14,6 +14,53 @@ #include <asm/ptrace.h> #include <asm/system.h> +/* + * These correspond to the IORESOURCE_IRQ_* defines in + * linux/ioport.h to select the interrupt line behaviour. When + * requesting an interrupt without specifying a IRQF_TRIGGER, the + * setting should be assumed to be "as already configured", which + * may be as per machine or firmware initialisation. + */ +#define IRQF_TRIGGER_NONE 0x00000000 +#define IRQF_TRIGGER_RISING 0x00000001 +#define IRQF_TRIGGER_FALLING 0x00000002 +#define IRQF_TRIGGER_HIGH 0x00000004 +#define IRQF_TRIGGER_LOW 0x00000008 +#define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \ + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) +#define IRQF_TRIGGER_PROBE 0x00000010 + +/* + * These flags used only by the kernel as part of the + * irq handling routines. + * + * IRQF_DISABLED - keep irqs disabled when calling the action handler + * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator + * IRQF_SHARED - allow sharing the irq among several devices + * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur + * IRQF_TIMER - Flag to mark this interrupt as timer interrupt + */ +#define IRQF_DISABLED 0x00000020 +#define IRQF_SAMPLE_RANDOM 0x00000040 +#define IRQF_SHARED 0x00000080 +#define IRQF_PROBE_SHARED 0x00000100 +#define IRQF_TIMER 0x00000200 + +/* + * Migration helpers. Scheduled for removal in 1/2007 + * Do not use for new code ! + */ +#define SA_INTERRUPT IRQF_DISABLED +#define SA_SAMPLE_RANDOM IRQF_SAMPLE_RANDOM +#define SA_SHIRQ IRQF_SHARED +#define SA_PROBEIRQ IRQF_PROBE_SHARED + +#define SA_TRIGGER_LOW IRQF_TRIGGER_LOW +#define SA_TRIGGER_HIGH IRQF_TRIGGER_HIGH +#define SA_TRIGGER_FALLING IRQF_TRIGGER_FALLING +#define SA_TRIGGER_RISING IRQF_TRIGGER_RISING +#define SA_TRIGGER_MASK IRQF_TRIGGER_MASK + struct irqaction { irqreturn_t (*handler)(int, void *, struct pt_regs *); unsigned long flags; diff --git a/include/linux/irq.h b/include/linux/irq.h index 0832149cdb18..ae1e422f18e3 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -24,41 +24,40 @@ /* * IRQ line status. + * + * Bits 0-16 are reserved for the IRQF_* bits in linux/interrupt.h + * + * IRQ types */ -#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */ -#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */ -#define IRQ_PENDING 4 /* IRQ pending - replay on enable */ -#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */ -#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */ -#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */ -#define IRQ_LEVEL 64 /* IRQ level triggered */ -#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */ +#define IRQ_TYPE_NONE 0x00000000 /* Default, unspecified type */ +#define IRQ_TYPE_EDGE_RISING 0x00000001 /* Edge rising type */ +#define IRQ_TYPE_EDGE_FALLING 0x00000002 /* Edge falling type */ +#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING) +#define IRQ_TYPE_LEVEL_HIGH 0x00000004 /* Level high type */ +#define IRQ_TYPE_LEVEL_LOW 0x00000008 /* Level low type */ +#define IRQ_TYPE_SENSE_MASK 0x0000000f /* Mask of the above */ +#define IRQ_TYPE_PROBE 0x00000010 /* Probing in progress */ + +/* Internal flags */ +#define IRQ_INPROGRESS 0x00010000 /* IRQ handler active - do not enter! */ +#define IRQ_DISABLED 0x00020000 /* IRQ disabled - do not enter! */ +#define IRQ_PENDING 0x00040000 /* IRQ pending - replay on enable */ +#define IRQ_REPLAY 0x00080000 /* IRQ has been replayed but not acked yet */ +#define IRQ_AUTODETECT 0x00100000 /* IRQ is being autodetected */ +#define IRQ_WAITING 0x00200000 /* IRQ not yet seen - for autodetection */ +#define IRQ_LEVEL 0x00400000 /* IRQ level triggered */ +#define IRQ_MASKED 0x00800000 /* IRQ masked - shouldn't be seen again */ #ifdef CONFIG_IRQ_PER_CPU -# define IRQ_PER_CPU 256 /* IRQ is per CPU */ +# define IRQ_PER_CPU 0x01000000 /* IRQ is per CPU */ # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU) #else # define CHECK_IRQ_PER_CPU(var) 0 #endif -#define IRQ_NOPROBE 512 /* IRQ is not valid for probing */ -#define IRQ_NOREQUEST 1024 /* IRQ cannot be requested */ -#define IRQ_NOAUTOEN 2048 /* IRQ will not be enabled on request irq */ -#define IRQ_DELAYED_DISABLE \ - 4096 /* IRQ disable (masking) happens delayed. */ - -/* - * IRQ types, see also include/linux/interrupt.h - */ -#define IRQ_TYPE_NONE 0x0000 /* Default, unspecified type */ -#define IRQ_TYPE_EDGE_RISING 0x0001 /* Edge rising type */ -#define IRQ_TYPE_EDGE_FALLING 0x0002 /* Edge falling type */ -#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING) -#define IRQ_TYPE_LEVEL_HIGH 0x0004 /* Level high type */ -#define IRQ_TYPE_LEVEL_LOW 0x0008 /* Level low type */ -#define IRQ_TYPE_SENSE_MASK 0x000f /* Mask of the above */ -#define IRQ_TYPE_SIMPLE 0x0010 /* Simple type */ -#define IRQ_TYPE_PERCPU 0x0020 /* Per CPU type */ -#define IRQ_TYPE_PROBE 0x0040 /* Probing in progress */ +#define IRQ_NOPROBE 0x02000000 /* IRQ is not valid for probing */ +#define IRQ_NOREQUEST 0x04000000 /* IRQ cannot be requested */ +#define IRQ_NOAUTOEN 0x08000000 /* IRQ will not be enabled on request irq */ +#define IRQ_DELAYED_DISABLE 0x10000000 /* IRQ disable (masking) happens delayed. */ struct proc_dir_entry; diff --git a/include/linux/signal.h b/include/linux/signal.h index 1e4ce7225eee..117135e33d67 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -9,32 +9,6 @@ #include <linux/spinlock.h> /* - * These values of sa_flags are used only by the kernel as part of the - * irq handling routines. - * - * SA_INTERRUPT is also used by the irq handling routines. - * SA_SHIRQ is for shared interrupt support on PCI and EISA. - * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur - */ -#define SA_SAMPLE_RANDOM SA_RESTART -#define SA_SHIRQ 0x04000000 -#define SA_PROBEIRQ 0x08000000 - -/* - * As above, these correspond to the IORESOURCE_IRQ_* defines in - * linux/ioport.h to select the interrupt line behaviour. When - * requesting an interrupt without specifying a SA_TRIGGER, the - * setting should be assumed to be "as already configured", which - * may be as per machine or firmware initialisation. - */ -#define SA_TRIGGER_LOW 0x00000008 -#define SA_TRIGGER_HIGH 0x00000004 -#define SA_TRIGGER_FALLING 0x00000002 -#define SA_TRIGGER_RISING 0x00000001 -#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\ - SA_TRIGGER_RISING|SA_TRIGGER_FALLING) - -/* * Real Time signals may be queued. */ |