summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt9
-rw-r--r--sound/pci/hda/hda_intel.c85
2 files changed, 57 insertions, 37 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index c69581ca2a34..ef07506e583c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -618,6 +618,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for Intel HD Audio (ICH6, ICH6M, ICH7)
model - force the model name
+ position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF)
Module supports up to 8 cards.
@@ -643,6 +644,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
+ Note 2: If you get click noises on output, try the module option
+ position_fix=1 or 2. position_fix=1 will use the SD_LPIB
+ register value without FIFO size correction as the current
+ DMA pointer. position_fix=2 will make the driver to use
+ the position buffer instead of reading SD_LPIB register.
+ (Usually SD_LPLIB register is more accurate than the
+ position buffer.)
+
Module snd-hdsp
---------------
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index cbc9ca73c2ab..104593fa08eb 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -51,6 +51,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static char *model[SNDRV_CARDS];
+static int position_fix[SNDRV_CARDS];
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@@ -60,6 +61,8 @@ module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Intel HD audio interface.");
module_param_array(model, charp, NULL, 0444);
MODULE_PARM_DESC(model, "Use the given board model.");
+module_param_array(position_fix, bool, NULL, 0444);
+MODULE_PARM_DESC(position_fix, "Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF).");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
@@ -183,6 +186,12 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define ICH6_MAX_CORB_ENTRIES 256
#define ICH6_MAX_RIRB_ENTRIES 256
+/* position fix mode */
+enum {
+ POS_FIX_FIFO,
+ POS_FIX_NONE,
+ POS_FIX_POSBUF
+};
/*
* Use CORB/RIRB for communication from/to codecs.
@@ -191,12 +200,6 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define USE_CORB_RIRB
/*
- * Define this if use the position buffer instead of reading SD_LPIB
- * It's not used as default since SD_LPIB seems to give more accurate position
- */
-/* #define USE_POSBUF */
-
-/*
*/
typedef struct snd_azx azx_t;
@@ -271,6 +274,9 @@ struct snd_azx {
struct snd_dma_buffer bdl;
struct snd_dma_buffer rb;
struct snd_dma_buffer posbuf;
+
+ /* flags */
+ int position_fix;
};
/*
@@ -657,11 +663,11 @@ static void azx_init_chip(azx_t *chip)
/* initialize the codec command I/O */
azx_init_cmd_io(chip);
-#ifdef USE_POSBUF
- /* program the position buffer */
- azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
- azx_writel(chip, DPUBASE, upper_32bit(chip->posbuf.addr));
-#endif
+ if (chip->position_fix == POS_FIX_POSBUF) {
+ /* program the position buffer */
+ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
+ azx_writel(chip, DPUBASE, upper_32bit(chip->posbuf.addr));
+ }
}
@@ -791,11 +797,12 @@ static int azx_setup_controller(azx_t *chip, azx_dev_t *azx_dev)
/* upper BDL address */
azx_sd_writel(azx_dev, SD_BDLPU, upper_32bit(azx_dev->bdl_addr));
-#ifdef USE_POSBUF
- /* enable the position buffer */
- if (! (azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
- azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
-#endif
+ if (chip->position_fix == POS_FIX_POSBUF) {
+ /* enable the position buffer */
+ if (! (azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
+ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
+ }
+
/* set the interrupt enable bits in the descriptor control register */
azx_sd_writel(azx_dev, SD_CTL, azx_sd_readl(azx_dev, SD_CTL) | SD_INT_MASK);
@@ -1036,16 +1043,20 @@ static int azx_pcm_trigger(snd_pcm_substream_t *substream, int cmd)
static snd_pcm_uframes_t azx_pcm_pointer(snd_pcm_substream_t *substream)
{
+ struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
+ azx_t *chip = apcm->chip;
azx_dev_t *azx_dev = get_azx_dev(substream);
unsigned int pos;
-#ifdef USE_POSBUF
- /* use the position buffer */
- pos = *azx_dev->posbuf;
-#else
- /* read LPIB */
- pos = azx_sd_readl(azx_dev, SD_LPIB) + azx_dev->fifo_size;
-#endif
+ if (chip->position_fix == POS_FIX_POSBUF) {
+ /* use the position buffer */
+ pos = *azx_dev->posbuf;
+ } else {
+ /* read LPIB */
+ pos = azx_sd_readl(azx_dev, SD_LPIB);
+ if (chip->position_fix == POS_FIX_FIFO)
+ pos += azx_dev->fifo_size;
+ }
if (pos >= azx_dev->bufsize)
pos = 0;
return bytes_to_frames(substream->runtime, pos);
@@ -1155,9 +1166,8 @@ static int __devinit azx_init_stream(azx_t *chip)
azx_dev_t *azx_dev = &chip->azx_dev[i];
azx_dev->bdl = (u32 *)(chip->bdl.area + off);
azx_dev->bdl_addr = chip->bdl.addr + off;
-#ifdef USE_POSBUF
- azx_dev->posbuf = (volatile u32 *)(chip->posbuf.area + i * 8);
-#endif
+ if (chip->position_fix == POS_FIX_POSBUF)
+ azx_dev->posbuf = (volatile u32 *)(chip->posbuf.area + i * 8);
/* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
azx_dev->sd_addr = chip->remap_addr + (0x20 * i + 0x80);
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */
@@ -1237,10 +1247,8 @@ static int azx_free(azx_t *chip)
snd_dma_free_pages(&chip->bdl);
if (chip->rb.area)
snd_dma_free_pages(&chip->rb);
-#ifdef USE_POSBUF
if (chip->posbuf.area)
snd_dma_free_pages(&chip->posbuf);
-#endif
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip);
@@ -1256,7 +1264,8 @@ static int azx_dev_free(snd_device_t *device)
/*
* constructor
*/
-static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **rchip)
+static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci,
+ int posfix, azx_t **rchip)
{
azx_t *chip;
int err = 0;
@@ -1283,6 +1292,8 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **r
chip->pci = pci;
chip->irq = -1;
+ chip->position_fix = posfix;
+
if ((err = pci_request_regions(pci, "ICH HD audio")) < 0) {
kfree(chip);
pci_disable_device(pci);
@@ -1314,14 +1325,14 @@ static int __devinit azx_create(snd_card_t *card, struct pci_dev *pci, azx_t **r
snd_printk(KERN_ERR SFX "cannot allocate BDL\n");
goto errout;
}
-#ifdef USE_POSBUF
- /* allocate memory for the position buffer */
- if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci),
- MAX_ICH6_DEV * 8, &chip->posbuf)) < 0) {
- snd_printk(KERN_ERR SFX "cannot allocate posbuf\n");
- goto errout;
+ if (chip->position_fix == POS_FIX_POSBUF) {
+ /* allocate memory for the position buffer */
+ if ((err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci),
+ MAX_ICH6_DEV * 8, &chip->posbuf)) < 0) {
+ snd_printk(KERN_ERR SFX "cannot allocate posbuf\n");
+ goto errout;
+ }
}
-#endif
/* allocate CORB/RIRB */
if ((err = azx_alloc_cmd_io(chip)) < 0)
goto errout;
@@ -1372,7 +1383,7 @@ static int __devinit azx_probe(struct pci_dev *pci, const struct pci_device_id *
return -ENOMEM;
}
- if ((err = azx_create(card, pci, &chip)) < 0) {
+ if ((err = azx_create(card, pci, position_fix[dev], &chip)) < 0) {
snd_card_free(card);
return err;
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 01:35:31 +0000