diff options
27 files changed, 196 insertions, 157 deletions
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index bbbaeb0abcd3..06808434ea04 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {} # define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 #endif -#define OMAP1_MBOX_BASE IO_ADDRESS(OMAP16XX_MAILBOX_BASE) +#define OMAP1_MBOX_BASE OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE) static struct resource mbox_resources[] = { { diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index 9ed5e2c1de4d..c4f05bdcf8a6 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -39,11 +39,11 @@ * Register and offset definitions to be used in PM assembler code * ---------------------------------------------------------------------------- */ -#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00) +#define CLKGEN_REG_ASM_BASE OMAP1_IO_ADDRESS(0xfffece00) #define ARM_IDLECT1_ASM_OFFSET 0x04 #define ARM_IDLECT2_ASM_OFFSET 0x08 -#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00) +#define TCMIF_ASM_BASE OMAP1_IO_ADDRESS(0xfffecc00) #define EMIFS_CONFIG_ASM_OFFSET 0x0c #define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index f754cee4f3c3..6f54b2c591cf 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .membase = IO_ADDRESS(OMAP_UART1_BASE), + .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, @@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = IO_ADDRESS(OMAP_UART2_BASE), + .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, @@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .membase = IO_ADDRESS(OMAP_UART3_BASE), + .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S index 261cdc48228b..7724e520d07c 100644 --- a/arch/arm/mach-omap1/sram.S +++ b/arch/arm/mach-omap1/sram.S @@ -21,13 +21,13 @@ ENTRY(omap1_sram_reprogram_clock) stmfd sp!, {r0 - r12, lr} @ save registers on stack - mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000 - orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000 - orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00 + mov r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000 + orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000 + orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00 - mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000 - orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 - orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 + mov r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000 + orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 + orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 tst r0, #1 << 4 @ want lock mode? beq newck @ nope diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 4d56408d3cff..1be6a214d88d 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -62,8 +62,8 @@ typedef struct { u32 read_tim; /* READ_TIM, R */ } omap_mpu_timer_regs_t; -#define omap_mpu_timer_base(n) \ -((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ +#define omap_mpu_timer_base(n) \ +((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ (n)*OMAP_MPU_TIMER_OFFSET)) static inline unsigned long omap_mpu_timer_read(int nr) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index b0c7402248f7..bdfda36d8aa8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -53,8 +53,8 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { static void __init gic_init_irq(void) { - gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); - gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29); + gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); } static void __init omap_4430sdp_init_irq(void) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index f3c91a1ca391..18d9a121aa7a 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg)) #define OMAP2430_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) /* * Architecture-specific global CM registers diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 8fe8d230f21b..48ee295db275 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * for us: do so */ - gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); + gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)); /* * Synchronise with the boot thread. diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 6cc375a275be..da3a53f8ccc8 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -48,7 +48,7 @@ int omap2_pm_debug; regs[reg_count++].val = __raw_readl(reg) #define DUMP_INTC_REG(reg, off) \ regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off))) + regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off))) void omap2_pm_dump(int mode, int resume, unsigned int us) { diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 9937e2814696..03c467c35f54 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,11 +17,11 @@ #include "prcm-common.h" #define OMAP2420_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg)) #define OMAP2430_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ - IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) + OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 1a8bbd094066..0837eda5f2b6 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg) return __raw_readl(OMAP_SMS_REGADDR(reg)); } #else -#define OMAP242X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) -#define OMAP243X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) -#define OMAP34XX_SDRC_REGADDR(reg) IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) +#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg)) +#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg)) +#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a7421a50410b..42449002f60d 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -73,7 +73,7 @@ static LIST_HEAD(uart_list); static struct plat_serial8250_port serial_platform_data0[] = { { - .membase = IO_ADDRESS(OMAP_UART1_BASE), + .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, .irq = 72, .flags = UPF_BOOT_AUTOCONF, @@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = { static struct plat_serial8250_port serial_platform_data1[] = { { - .membase = IO_ADDRESS(OMAP_UART2_BASE), + .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, .flags = UPF_BOOT_AUTOCONF, @@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = { static struct plat_serial8250_port serial_platform_data2[] = { { - .membase = IO_ADDRESS(OMAP_UART3_BASE), + .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, .flags = UPF_BOOT_AUTOCONF, diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index bb299851116d..9b62208658bc 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap242x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_ddr_init_sz) .word . - omap242x_sram_ddr_init @@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap242x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) + .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010) ENTRY(omap242x_sram_reprogram_sdrc_sz) .word . - omap242x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index 9955abcaeb31..df2cd9277c00 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl: prcm_mask_val: .word 0xFFFF3FFC omap243x_sdi_timer_32ksynct_cr: - .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_ddr_init_sz) .word . - omap243x_sram_ddr_init @@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl: ddr_prcm_mask_val: .word 0xFFFF3FFC omap243x_srs_timer_32ksynct: - .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) + .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010) ENTRY(omap243x_sram_reprogram_sdrc_sz) .word . - omap243x_sram_reprogram_sdrc diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 97eeeebcb066..e2338c0aebcf 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void) static void __init omap2_gp_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS - twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); + twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE); #endif omap_dm_timer_init(); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index e3ac94f09006..bf0863462101 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2337,16 +2337,16 @@ static int __init omap_init_dma(void) int ch, r; if (cpu_class_is_omap1()) { - omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE); + omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap24xx()) { - omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE); + omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap34xx()) { - omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE); + omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else if (cpu_is_omap44xx()) { - omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE); + omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; } else { pr_err("DMA init failed for unsupported omap\n"); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7f50b6103dee..d325b54daeb5 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void) for (i = 0; i < dm_timer_count; i++) { timer = &dm_timers[i]; - timer->io_base = IO_ADDRESS(timer->phys_base); + if (cpu_class_is_omap1()) + timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base); + else + timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base); #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (cpu_class_is_omap2()) { diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9298bc0ab171..fd63dd3bf4cd 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -31,7 +31,7 @@ /* * OMAP1510 GPIO registers */ -#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000) +#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000) #define OMAP1510_GPIO_DATA_INPUT 0x00 #define OMAP1510_GPIO_DATA_OUTPUT 0x04 #define OMAP1510_GPIO_DIR_CONTROL 0x08 @@ -45,10 +45,10 @@ /* * OMAP1610 specific GPIO registers */ -#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400) -#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00) -#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400) -#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00) +#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400) +#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00) +#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400) +#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00) #define OMAP1610_GPIO_REVISION 0x0000 #define OMAP1610_GPIO_SYSCONFIG 0x0010 #define OMAP1610_GPIO_SYSSTATUS 0x0014 @@ -70,12 +70,12 @@ /* * OMAP730 specific GPIO registers */ -#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800) +#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) #define OMAP730_GPIO_DATA_INPUT 0x00 #define OMAP730_GPIO_DATA_OUTPUT 0x04 #define OMAP730_GPIO_DIR_CONTROL 0x08 @@ -86,12 +86,12 @@ /* * OMAP850 specific GPIO registers */ -#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800) +#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) #define OMAP850_GPIO_DATA_INPUT 0x00 #define OMAP850_GPIO_DATA_OUTPUT 0x04 #define OMAP850_GPIO_DIR_CONTROL 0x08 @@ -99,19 +99,21 @@ #define OMAP850_GPIO_INT_MASK 0x10 #define OMAP850_GPIO_INT_STATUS 0x14 +#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE) + /* * omap24xx specific GPIO registers */ -#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000) -#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000) -#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000) -#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000) +#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000) +#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000) +#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000) +#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000) -#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000) -#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000) -#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000) -#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000) -#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000) +#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000) +#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000) +#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000) +#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000) +#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000) #define OMAP24XX_GPIO_REVISION 0x0000 #define OMAP24XX_GPIO_SYSCONFIG 0x0010 @@ -142,24 +144,22 @@ * omap34xx specific GPIO registers */ -#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000) -#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000) -#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000) -#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000) -#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000) -#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000) +#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000) +#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000) +#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000) +#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000) +#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000) +#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000) /* * OMAP44XX specific GPIO registers */ -#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000) -#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000) -#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000) -#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000) -#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000) -#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000) - -#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE) +#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000) +#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000) +#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000) +#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000) +#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000) +#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000) struct gpio_bank { void __iomem *base; @@ -195,7 +195,7 @@ struct gpio_bank { #ifdef CONFIG_ARCH_OMAP16XX static struct gpio_bank gpio_bank_1610[5] = { - { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, + { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO}, { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 }, { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 }, { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 }, @@ -205,14 +205,14 @@ static struct gpio_bank gpio_bank_1610[5] = { #ifdef CONFIG_ARCH_OMAP15XX static struct gpio_bank gpio_bank_1510[2] = { - { OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 } }; #endif #ifdef CONFIG_ARCH_OMAP730 static struct gpio_bank gpio_bank_730[7] = { - { OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h index 8140dbccb7bc..826d317cdbec 100644 --- a/arch/arm/plat-omap/include/mach/control.h +++ b/arch/arm/plat-omap/include/mach/control.h @@ -20,15 +20,15 @@ #ifndef __ASSEMBLY__ #define OMAP242X_CTRL_REGADDR(reg) \ - IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) + OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) #define OMAP243X_CTRL_REGADDR(reg) \ - IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) + OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) #define OMAP343X_CTRL_REGADDR(reg) \ - IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #else -#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) #endif /* __ASSEMBLY__ */ /* diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index 56426ed45ef4..a5592991634d 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -41,7 +41,7 @@ .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(OMAP_IH1_BASE) + ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] mov \irqstat, #0xffffffff @@ -53,7 +53,7 @@ cmp \irqnr, #0 ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE) + ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] addeqs \irqnr, \irqnr, #32 1510: @@ -68,9 +68,9 @@ /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE) #elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) +#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE) #endif #if defined(CONFIG_ARCH_OMAP4) #include <mach/omap44xx.h> diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 21fb0efdda86..55659809478e 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -54,15 +54,23 @@ * ---------------------------------------------------------------------------- */ +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#define OMAP2_IO_OFFSET 0x90000000 +#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */ + #if defined(CONFIG_ARCH_OMAP1) #define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ #define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) +#define IO_VIRT (IO_PHYS - OMAP1_IO_OFFSET) #elif defined(CONFIG_ARCH_OMAP2) @@ -87,11 +95,6 @@ #define OMAP243X_SMS_VIRT 0xFC000000 #define OMAP243X_SMS_SIZE SZ_1M -#define IO_OFFSET 0x90000000 -#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ - /* DSP */ #define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ #define DSP_MEM_24XX_VIRT 0xe0000000 @@ -143,12 +146,6 @@ #define OMAP343X_SDRC_VIRT 0xFD000000 #define OMAP343X_SDRC_SIZE SZ_1M - -#define IO_OFFSET 0x90000000 -#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ - /* DSP */ #define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ #define DSP_MEM_34XX_VIRT 0xe0000000 @@ -188,39 +185,20 @@ #define OMAP44XX_GPMC_VIRT 0xe0000000 #define OMAP44XX_GPMC_SIZE SZ_1M - -#define IO_OFFSET 0x90000000 -#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ - #endif -#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa)) -#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa)) -#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa)) - -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) +#ifndef __ASSEMBLER__ /* - * Functions to access the OMAP IO region - * - * NOTE: - Use omap_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed + * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ -#define omap_readb(a) __raw_readb(IO_ADDRESS(a)) -#define omap_readw(a) __raw_readw(IO_ADDRESS(a)) -#define omap_readl(a) __raw_readl(IO_ADDRESS(a)) -#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a)) -#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a)) -#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a)) +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); struct omap_sdrc_params; diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h index 39b591ff54bb..f82a8dcaad94 100644 --- a/arch/arm/plat-omap/include/mach/mtd-xip.h +++ b/arch/arm/plat-omap/include/mach/mtd-xip.h @@ -25,7 +25,7 @@ typedef struct { } xip_omap_mpu_timer_regs_t; #define xip_omap_mpu_timer_base(n) \ -((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ +((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ (n)*OMAP_MPU_TIMER_OFFSET)) static inline unsigned long xip_omap_mpu_timer_read(int nr) diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h index 15dec7f1c7c0..b3ba5ac7b4a4 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -33,14 +33,14 @@ #define IRQ_SIR_IRQ 0x0040 #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 -#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) +#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) #define OMAP44XX_SCU_BASE 0x48240000 -#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE) +#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE) #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 -#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) +#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE) #define OMAP44XX_LOCAL_TWD_SIZE 0x00000100 #define OMAP44XX_WKUPGEN_BASE 0x48281000 -#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) +#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE) #endif /* __ASM_ARCH_OMAP44XX_H */ diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 0be18e4ff182..93f70d2cbce1 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -71,11 +71,11 @@ */ #define OMAP242X_SMS_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) + (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg) #define OMAP243X_SMS_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) + (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg) #define OMAP343X_SMS_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) + (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg) /* SMS register offsets - read/write with sms_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 9b42d72d96cf..d491ad15f198 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr) __iounmap(addr); } EXPORT_SYMBOL(omap_iounmap); + +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ + +u8 omap_readb(u32 pa) +{ + if (cpu_class_is_omap1()) + return __raw_readb(OMAP1_IO_ADDRESS(pa)); + else + return __raw_readb(OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readb); + +u16 omap_readw(u32 pa) +{ + if (cpu_class_is_omap1()) + return __raw_readw(OMAP1_IO_ADDRESS(pa)); + else + return __raw_readw(OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readw); + +u32 omap_readl(u32 pa) +{ + if (cpu_class_is_omap1()) + return __raw_readl(OMAP1_IO_ADDRESS(pa)); + else + return __raw_readl(OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readl); + +void omap_writeb(u8 v, u32 pa) +{ + if (cpu_class_is_omap1()) + __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); + else + __raw_writeb(v, OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writeb); + +void omap_writew(u16 v, u32 pa) +{ + if (cpu_class_is_omap1()) + __raw_writew(v, OMAP1_IO_ADDRESS(pa)); + else + __raw_writew(v, OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writew); + +void omap_writel(u32 v, u32 pa) +{ + if (cpu_class_is_omap1()) + __raw_writel(v, OMAP1_IO_ADDRESS(pa)); + else + __raw_writel(v, OMAP2_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 5eae7876979c..925f64711c37 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -56,16 +56,16 @@ #define SRAM_BOOTLOADER_SZ 0x80 #endif -#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048) -#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0) +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048) +#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0) #define GP_DEVICE 0x300 diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index 148cbcc39602..915439dc05a0 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable) dispc_write_reg(DISPC_CONTROL, l); /* Set bypass mode in RFBI module */ - l = __raw_readl(IO_ADDRESS(RFBI_CONTROL)); + l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL)); l |= enable ? 0 : (1 << 1); - __raw_writel(l, IO_ADDRESS(RFBI_CONTROL)); + __raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL)); } static void set_lcd_data_lines(int data_lines) @@ -1421,7 +1421,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode, } /* L3 firewall setting: enable access to OCM RAM */ - __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); + __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0)); if ((r = alloc_palette_ram()) < 0) goto fail2; |