summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--drivers/ata/Kconfig13
-rw-r--r--drivers/ata/Makefile2
-rw-r--r--drivers/ata/libata-acpi.c602
-rw-r--r--drivers/ata/libata-core.c7
-rw-r--r--drivers/ata/libata.h10
-rw-r--r--include/linux/libata.h5
7 files changed, 643 insertions, 1 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index abd575cfc759..5bc8970b8349 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -48,6 +48,7 @@ parameter is applicable:
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ LIBATA Libata driver is enabled
LP Printer support is enabled.
LOOP Loopback device support is enabled.
M68k M68k architecture is enabled.
@@ -1038,6 +1039,10 @@ and is between 256 and 4096 characters. It is defined in the file
emulation library even if a 387 maths coprocessor
is present.
+ noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
+ when set.
+ Format: <int>
+
noaliencache [MM, NUMA] Disables the allcoation of alien caches in
the slab allocator. Saves per-node memory, but will
impact performance on real NUMA hardware.
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3747457fee7a..4af0a4bb5780 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -161,6 +161,19 @@ config SATA_INTEL_COMBINED
depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
default y
+config SATA_ACPI
+ bool
+ depends on ACPI && PCI
+ default y
+ help
+ This option adds support for SATA-related ACPI objects.
+ These ACPI objects add the ability to retrieve taskfiles
+ from the ACPI BIOS and write them to the disk controller.
+ These objects may be related to performance, security,
+ power management, or other areas.
+ You can disable this at kernel boot time by using the
+ option libata.noacpi=1
+
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index cd096f0c78a1..74298afbbaa7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -66,4 +66,4 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o
-
+libata-$(CONFIG_SATA_ACPI) += libata-acpi.o
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
new file mode 100644
index 000000000000..7b740fe1721b
--- /dev/null
+++ b/drivers/ata/libata-acpi.c
@@ -0,0 +1,602 @@
+/*
+ * libata-acpi.c
+ * Provides ACPI support for PATA/SATA.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Copyright (C) 2006 Randy Dunlap
+ */
+
+#include <linux/ata.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/libata.h>
+#include <linux/pci.h>
+#include "libata.h"
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acnames.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+#include <acpi/acexcep.h>
+#include <acpi/acmacros.h>
+#include <acpi/actypes.h>
+
+#define SATA_ROOT_PORT(x) (((x) >> 16) & 0xffff)
+#define SATA_PORT_NUMBER(x) ((x) & 0xffff) /* or NO_PORT_MULT */
+#define NO_PORT_MULT 0xffff
+#define SATA_ADR_RSVD 0xffffffff
+
+#define REGS_PER_GTF 7
+struct taskfile_array {
+ u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
+};
+
+
+/**
+ * sata_get_dev_handle - finds acpi_handle and PCI device.function
+ * @dev: device to locate
+ * @handle: returned acpi_handle for @dev
+ * @pcidevfn: return PCI device.func for @dev
+ *
+ * This function is somewhat SATA-specific. Or at least the
+ * PATA & SATA versions of this function are different,
+ * so it's not entirely generic code.
+ *
+ * Returns 0 on success, <0 on error.
+ */
+static int sata_get_dev_handle(struct device *dev, acpi_handle *handle,
+ acpi_integer *pcidevfn)
+{
+ struct pci_dev *pci_dev;
+ acpi_integer addr;
+
+ pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */
+ /* Please refer to the ACPI spec for the syntax of _ADR. */
+ addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
+ *pcidevfn = addr;
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+ if (!*handle)
+ return -ENODEV;
+ return 0;
+}
+
+/**
+ * pata_get_dev_handle - finds acpi_handle and PCI device.function
+ * @dev: device to locate
+ * @handle: returned acpi_handle for @dev
+ * @pcidevfn: return PCI device.func for @dev
+ *
+ * The PATA and SATA versions of this function are different.
+ *
+ * Returns 0 on success, <0 on error.
+ */
+static int pata_get_dev_handle(struct device *dev, acpi_handle *handle,
+ acpi_integer *pcidevfn)
+{
+ unsigned int bus, devnum, func;
+ acpi_integer addr;
+ acpi_handle dev_handle, parent_handle;
+ struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
+ .pointer = NULL};
+ acpi_status status;
+ struct acpi_device_info *dinfo = NULL;
+ int ret = -ENODEV;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ bus = pdev->bus->number;
+ devnum = PCI_SLOT(pdev->devfn);
+ func = PCI_FUNC(pdev->devfn);
+
+ dev_handle = DEVICE_ACPI_HANDLE(dev);
+ parent_handle = DEVICE_ACPI_HANDLE(dev->parent);
+
+ status = acpi_get_object_info(parent_handle, &buffer);
+ if (ACPI_FAILURE(status))
+ goto err;
+
+ dinfo = buffer.pointer;
+ if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
+ dinfo->address == bus) {
+ /* ACPI spec for _ADR for PCI bus: */
+ addr = (acpi_integer)(devnum << 16 | func);
+ *pcidevfn = addr;
+ *handle = dev_handle;
+ } else {
+ goto err;
+ }
+
+ if (!*handle)
+ goto err;
+ ret = 0;
+err:
+ kfree(dinfo);
+ return ret;
+}
+
+struct walk_info { /* can be trimmed some */
+ struct device *dev;
+ struct acpi_device *adev;
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ unsigned int drivenum;
+ acpi_handle obj_handle;
+ struct ata_port *ataport;
+ struct ata_device *atadev;
+ u32 sata_adr;
+ int status;
+ char basepath[ACPI_PATHNAME_MAX];
+ int basepath_len;
+};
+
+static acpi_status get_devices(acpi_handle handle,
+ u32 level, void *context, void **return_value)
+{
+ acpi_status status;
+ struct walk_info *winfo = context;
+ struct acpi_buffer namebuf = {ACPI_ALLOCATE_BUFFER, NULL};
+ char *pathname;
+ struct acpi_buffer buffer;
+ struct acpi_device_info *dinfo;
+
+ status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf);
+ if (status)
+ goto ret;
+ pathname = namebuf.pointer;
+
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+ status = acpi_get_object_info(handle, &buffer);
+ if (ACPI_FAILURE(status))
+ goto out2;
+
+ dinfo = buffer.pointer;
+
+ /* find full device path name for pcidevfn */
+ if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
+ dinfo->address == winfo->pcidevfn) {
+ if (ata_msg_probe(winfo->ataport))
+ ata_dev_printk(winfo->atadev, KERN_DEBUG,
+ ":%s: matches pcidevfn (0x%llx)\n",
+ pathname, winfo->pcidevfn);
+ strlcpy(winfo->basepath, pathname,
+ sizeof(winfo->basepath));
+ winfo->basepath_len = strlen(pathname);
+ goto out;
+ }
+
+ /* if basepath is not yet known, ignore this object */
+ if (!winfo->basepath_len)
+ goto out;
+
+ /* if this object is in scope of basepath, maybe use it */
+ if (strncmp(pathname, winfo->basepath,
+ winfo->basepath_len) == 0) {
+ if (!(dinfo->valid & ACPI_VALID_ADR))
+ goto out;
+ if (ata_msg_probe(winfo->ataport))
+ ata_dev_printk(winfo->atadev, KERN_DEBUG,
+ "GOT ONE: (%s) root_port = 0x%llx,"
+ " port_num = 0x%llx\n", pathname,
+ SATA_ROOT_PORT(dinfo->address),
+ SATA_PORT_NUMBER(dinfo->address));
+ /* heuristics: */
+ if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT)
+ if (ata_msg_probe(winfo->ataport))
+ ata_dev_printk(winfo->atadev,
+ KERN_DEBUG, "warning: don't"
+ " know how to handle SATA port"
+ " multiplier\n");
+ if (SATA_ROOT_PORT(dinfo->address) ==
+ winfo->ataport->port_no &&
+ SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) {
+ if (ata_msg_probe(winfo->ataport))
+ ata_dev_printk(winfo->atadev,
+ KERN_DEBUG,
+ "THIS ^^^^^ is the requested"
+ " SATA drive (handle = 0x%p)\n",
+ handle);
+ winfo->sata_adr = dinfo->address;
+ winfo->obj_handle = handle;
+ }
+ }
+out:
+ kfree(dinfo);
+out2:
+ kfree(pathname);
+
+ret:
+ return status;
+}
+
+/* Get the SATA drive _ADR object. */
+static int get_sata_adr(struct device *dev, acpi_handle handle,
+ acpi_integer pcidevfn, unsigned int drive,
+ struct ata_port *ap,
+ struct ata_device *atadev, u32 *dev_adr)
+{
+ acpi_status status;
+ struct walk_info *winfo;
+ int err = -ENOMEM;
+
+ winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL);
+ if (!winfo)
+ goto out;
+
+ winfo->dev = dev;
+ winfo->atadev = atadev;
+ winfo->ataport = ap;
+ if (acpi_bus_get_device(handle, &winfo->adev) < 0)
+ if (ata_msg_probe(ap))
+ ata_dev_printk(winfo->atadev, KERN_DEBUG,
+ "acpi_bus_get_device failed\n");
+ winfo->handle = handle;
+ winfo->pcidevfn = pcidevfn;
+ winfo->drivenum = drive;
+
+ status = acpi_get_devices(NULL, get_devices, winfo, NULL);
+ if (ACPI_FAILURE(status)) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(winfo->atadev, KERN_DEBUG,
+ "%s: acpi_get_devices failed\n",
+ __FUNCTION__);
+ err = -ENODEV;
+ } else {
+ *dev_adr = winfo->sata_adr;
+ atadev->obj_handle = winfo->obj_handle;
+ err = 0;
+ }
+ kfree(winfo);
+out:
+ return err;
+}
+
+/**
+ * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * @ap: the ata_port for the drive
+ * @ix: target ata_device (drive) index
+ * @gtf_length: number of bytes of _GTF data returned at @gtf_address
+ * @gtf_address: buffer containing _GTF taskfile arrays
+ *
+ * This applies to both PATA and SATA drives.
+ *
+ * The _GTF method has no input parameters.
+ * It returns a variable number of register set values (registers
+ * hex 1F1..1F7, taskfiles).
+ * The <variable number> is not known in advance, so have ACPI-CA
+ * allocate the buffer as needed and return it, then free it later.
+ *
+ * The returned @gtf_length and @gtf_address are only valid if the
+ * function return value is 0.
+ */
+static int do_drive_get_GTF(struct ata_port *ap, int ix,
+ unsigned int *gtf_length, unsigned long *gtf_address,
+ unsigned long *obj_loc)
+{
+ acpi_status status;
+ acpi_handle dev_handle = NULL;
+ acpi_handle chan_handle, drive_handle;
+ acpi_integer pcidevfn = 0;
+ u32 dev_adr;
+ struct acpi_buffer output;
+ union acpi_object *out_obj;
+ struct device *dev = ap->host->dev;
+ struct ata_device *atadev = &ap->device[ix];
+ int err = -ENODEV;
+
+ *gtf_length = 0;
+ *gtf_address = 0UL;
+ *obj_loc = 0UL;
+
+ if (noacpi)
+ return 0;
+
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: ENTER: ap->id: %d, port#: %d\n",
+ __FUNCTION__, ap->id, ap->port_no);
+
+ if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: ERR: "
+ "ata_dev_present: %d, PORT_DISABLED: %lu\n",
+ __FUNCTION__, ata_dev_enabled(atadev),
+ ap->flags & ATA_FLAG_DISABLED);
+ goto out;
+ }
+
+ /* Don't continue if device has no _ADR method.
+ * _GTF is intended for known motherboard devices. */
+ if (!(ap->cbl == ATA_CBL_SATA)) {
+ err = pata_get_dev_handle(dev, &dev_handle, &pcidevfn);
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: pata_get_dev_handle failed (%d)\n",
+ __FUNCTION__, err);
+ goto out;
+ }
+ } else {
+ err = sata_get_dev_handle(dev, &dev_handle, &pcidevfn);
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: sata_get_dev_handle failed (%d\n",
+ __FUNCTION__, err);
+ goto out;
+ }
+ }
+
+ /* Get this drive's _ADR info. if not already known. */
+ if (!atadev->obj_handle) {
+ if (!(ap->cbl == ATA_CBL_SATA)) {
+ /* get child objects of dev_handle == channel objects,
+ * + _their_ children == drive objects */
+ /* channel is ap->port_no */
+ chan_handle = acpi_get_child(dev_handle,
+ ap->port_no);
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: chan adr=%d: chan_handle=0x%p\n",
+ __FUNCTION__, ap->port_no,
+ chan_handle);
+ if (!chan_handle) {
+ err = -ENODEV;
+ goto out;
+ }
+ /* TBD: could also check ACPI object VALID bits */
+ drive_handle = acpi_get_child(chan_handle, ix);
+ if (!drive_handle) {
+ err = -ENODEV;
+ goto out;
+ }
+ dev_adr = ix;
+ atadev->obj_handle = drive_handle;
+ } else { /* for SATA mode */
+ dev_adr = SATA_ADR_RSVD;
+ err = get_sata_adr(dev, dev_handle, pcidevfn, 0,
+ ap, atadev, &dev_adr);
+ }
+ if (err < 0 || dev_adr == SATA_ADR_RSVD ||
+ !atadev->obj_handle) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: get_sata/pata_adr failed: "
+ "err=%d, dev_adr=%u, obj_handle=0x%p\n",
+ __FUNCTION__, err, dev_adr,
+ atadev->obj_handle);
+ goto out;
+ }
+ }
+
+ /* Setting up output buffer */
+ output.length = ACPI_ALLOCATE_BUFFER;
+ output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
+
+ /* _GTF has no input parameters */
+ err = -EIO;
+ status = acpi_evaluate_object(atadev->obj_handle, "_GTF",
+ NULL, &output);
+ if (ACPI_FAILURE(status)) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: Run _GTF error: status = 0x%x\n",
+ __FUNCTION__, status);
+ goto out;
+ }
+
+ if (!output.length || !output.pointer) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: "
+ "length or ptr is NULL (0x%llx, 0x%p)\n",
+ __FUNCTION__,
+ (unsigned long long)output.length,
+ output.pointer);
+ kfree(output.pointer);
+ goto out;
+ }
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ kfree(output.pointer);
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: "
+ "error: expected object type of "
+ " ACPI_TYPE_BUFFER, got 0x%x\n",
+ __FUNCTION__, out_obj->type);
+ err = -ENOENT;
+ goto out;
+ }
+
+ if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
+ out_obj->buffer.length % REGS_PER_GTF) {
+ if (ata_msg_drv(ap))
+ ata_dev_printk(atadev, KERN_ERR,
+ "%s: unexpected GTF length (%d) or addr (0x%p)\n",
+ __FUNCTION__, out_obj->buffer.length,
+ out_obj->buffer.pointer);
+ err = -ENOENT;
+ goto out;
+ }
+
+ *gtf_length = out_obj->buffer.length;
+ *gtf_address = (unsigned long)out_obj->buffer.pointer;
+ *obj_loc = (unsigned long)out_obj;
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: returning "
+ "gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
+ __FUNCTION__, *gtf_length, *gtf_address, *obj_loc);
+ err = 0;
+out:
+ return err;
+}
+
+/**
+ * taskfile_load_raw - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * LOCKING: TBD:
+ * Inherited from caller.
+ */
+static void taskfile_load_raw(struct ata_port *ap,
+ struct ata_device *atadev,
+ const struct taskfile_array *gtf)
+{
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ __FUNCTION__,
+ gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
+ gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
+
+ if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0)
+ && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0)
+ && (gtf->tfa[6] == 0))
+ return;
+
+ if (ap->ops->qc_issue) {
+ struct ata_taskfile tf;
+ unsigned int err;
+
+ ata_tf_init(atadev, &tf);
+
+ /* convert gtf to tf */
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
+ tf.protocol = atadev->class == ATA_DEV_ATAPI ?
+ ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
+ tf.feature = gtf->tfa[0]; /* 0x1f1 */
+ tf.nsect = gtf->tfa[1]; /* 0x1f2 */
+ tf.lbal = gtf->tfa[2]; /* 0x1f3 */
+ tf.lbam = gtf->tfa[3]; /* 0x1f4 */
+ tf.lbah = gtf->tfa[4]; /* 0x1f5 */
+ tf.device = gtf->tfa[5]; /* 0x1f6 */
+ tf.command = gtf->tfa[6]; /* 0x1f7 */
+
+ err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
+ if (err && ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_ERR,
+ "%s: ata_exec_internal failed: %u\n",
+ __FUNCTION__, err);
+ } else
+ if (ata_msg_warn(ap))
+ ata_dev_printk(atadev, KERN_WARNING,
+ "%s: SATA driver is missing qc_issue function"
+ " entry points\n",
+ __FUNCTION__);
+}
+
+/**
+ * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
+ * @ap: the ata_port for the drive
+ * @atadev: target ata_device
+ * @gtf_length: total number of bytes of _GTF taskfiles
+ * @gtf_address: location of _GTF taskfile arrays
+ *
+ * This applies to both PATA and SATA drives.
+ *
+ * Write {gtf_address, length gtf_length} in groups of
+ * REGS_PER_GTF bytes.
+ */
+static int do_drive_set_taskfiles(struct ata_port *ap,
+ struct ata_device *atadev, unsigned int gtf_length,
+ unsigned long gtf_address)
+{
+ int err = -ENODEV;
+ int gtf_count = gtf_length / REGS_PER_GTF;
+ int ix;
+ struct taskfile_array *gtf;
+
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: ENTER: ap->id: %d, port#: %d\n",
+ __FUNCTION__, ap->id, ap->port_no);
+
+ if (noacpi || !(ap->cbl == ATA_CBL_SATA))
+ return 0;
+
+ if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED))
+ goto out;
+ if (!gtf_count) /* shouldn't be here */
+ goto out;
+
+ if (gtf_length % REGS_PER_GTF) {
+ if (ata_msg_drv(ap))
+ ata_dev_printk(atadev, KERN_ERR,
+ "%s: unexpected GTF length (%d)\n",
+ __FUNCTION__, gtf_length);
+ goto out;
+ }
+
+ for (ix = 0; ix < gtf_count; ix++) {
+ gtf = (struct taskfile_array *)
+ (gtf_address + ix * REGS_PER_GTF);
+
+ /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
+ taskfile_load_raw(ap, atadev, gtf);
+ }
+
+ err = 0;
+out:
+ return err;
+}
+
+/**
+ * ata_acpi_exec_tfs - get then write drive taskfile settings
+ * @ap: the ata_port for the drive
+ *
+ * This applies to both PATA and SATA drives.
+ */
+int ata_acpi_exec_tfs(struct ata_port *ap)
+{
+ int ix;
+ int ret =0;
+ unsigned int gtf_length;
+ unsigned long gtf_address;
+ unsigned long obj_loc;
+
+ if (noacpi)
+ return 0;
+
+ for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
+ if (!ata_dev_enabled(&ap->device[ix]))
+ continue;
+
+ ret = do_drive_get_GTF(ap, ix,
+ &gtf_length, &gtf_address, &obj_loc);
+ if (ret < 0) {
+ if (ata_msg_probe(ap))
+ ata_port_printk(ap, KERN_DEBUG,
+ "%s: get_GTF error (%d)\n",
+ __FUNCTION__, ret);
+ break;
+ }
+
+ ret = do_drive_set_taskfiles(ap, &ap->device[ix],
+ gtf_length, gtf_address);
+ kfree((void *)obj_loc);
+ if (ret < 0) {
+ if (ata_msg_probe(ap))
+ ata_port_printk(ap, KERN_DEBUG,
+ "%s: set_taskfiles error (%d)\n",
+ __FUNCTION__, ret);
+ break;
+ }
+ }
+
+ return ret;
+}
+
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2cf8251728d2..785bf50488e9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -93,6 +93,10 @@ static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
+int noacpi;
+module_param(noacpi, int, 0444);
+MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -1778,6 +1782,9 @@ int ata_bus_probe(struct ata_port *ap)
/* reset and determine device classes */
ap->ops->phy_reset(ap);
+ /* retrieve and execute the ATA task file of _GTF */
+ ata_acpi_exec_tfs(ap);
+
for (i = 0; i < ATA_MAX_DEVICES; i++) {
dev = &ap->device[i];
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 06ccf230e3c2..ea02903e8503 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -47,6 +47,7 @@ extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
extern int atapi_dmadir;
extern int libata_fua;
+extern int noacpi;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
@@ -87,6 +88,15 @@ extern void ata_port_init(struct ata_port *ap, struct ata_host *host,
extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
const struct ata_port_info *port);
+/* libata-acpi.c */
+#ifdef CONFIG_SATA_ACPI
+extern int ata_acpi_exec_tfs(struct ata_port *ap);
+#else
+static inline int ata_acpi_exec_tfs(struct ata_port *ap)
+{
+ return 0;
+}
+#endif
/* libata-scsi.c */
extern struct scsi_transport_template ata_scsi_transport_template;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b870b20df43c..86762a9f52ba 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -35,6 +35,7 @@
#include <linux/ata.h>
#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
+#include <linux/acpi.h>
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
@@ -495,6 +496,10 @@ struct ata_device {
/* error history */
struct ata_ering ering;
unsigned int horkage; /* List of broken features */
+#ifdef CONFIG_SATA_ACPI
+ /* ACPI objects info */
+ acpi_handle obj_handle;
+#endif
};
/* Offset into struct ata_device. Fields above it are maintained