diff options
| -rw-r--r-- | arch/arm/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 18 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-imx/Makefile.boot | 35 | ||||
| -rw-r--r-- | arch/arm/mach-imx/avic.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/clk-imx27.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/common.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cpu_op-mx51.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cpu_op-mx51.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cpufreq.c | 206 | ||||
| -rw-r--r-- | arch/arm/mach-imx/devices/Kconfig | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/devices/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/devices/devices-common.h | 10 | ||||
| -rw-r--r-- | arch/arm/mach-imx/devices/platform-ahci-imx.c | 157 | ||||
| -rw-r--r-- | arch/arm/mach-imx/hardware.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-cpuimx51sd.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-mx51_babbage.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mx6q.h | 31 |
18 files changed, 3 insertions, 533 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda426a0e..e904ddcccc28 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2163,13 +2163,6 @@ if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" -config CPU_FREQ_IMX - tristate "CPUfreq driver for i.MX CPUs" - depends on ARCH_MXC && CPU_FREQ - select CPU_FREQ_TABLE - help - This enables the CPUfreq driver for i.MX CPUs. - config CPU_FREQ_SA1100 bool diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4c9c6f9d2c55..6575e4ebe26e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -83,24 +83,12 @@ config ARCH_MXC_IOMUX_V3 config ARCH_MX1 bool -config MACH_MX21 - bool - config ARCH_MX25 bool config MACH_MX27 bool -config ARCH_MX5 - bool - -config ARCH_MX51 - bool - -config ARCH_MX53 - bool - config SOC_IMX1 bool select ARCH_MX1 @@ -114,7 +102,6 @@ config SOC_IMX21 select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 - select MACH_MX21 select MXC_AVIC config SOC_IMX25 @@ -155,7 +142,6 @@ config SOC_IMX35 config SOC_IMX5 bool select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 @@ -163,8 +149,6 @@ config SOC_IMX5 config SOC_IMX51 bool - select ARCH_MX5 - select ARCH_MX51 select PINCTRL select PINCTRL_IMX51 select SOC_IMX5 @@ -789,8 +773,6 @@ comment "Device tree only" config SOC_IMX53 bool "i.MX53 support" - select ARCH_MX5 - select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN select IMX_HAVE_PLATFORM_IMX2_WDT select PINCTRL diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c4ce0906d76a..23555b0c08a9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o @@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifeq ($(CONFIG_CPU_IDLE),y) obj-y += cpuidle.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot deleted file mode 100644 index 41ba1bb0437b..000000000000 --- a/arch/arm/mach-imx/Makefile.boot +++ /dev/null @@ -1,35 +0,0 @@ -zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 -params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 -initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 - -zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 -params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 -initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 - -zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 -params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 -initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 - -zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 -params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 -initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 - -zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 -params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 -initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 - -zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 -params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 -initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 - -zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 -params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 -initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 0eff23ed92b9..49c87e7aa817 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -54,8 +54,6 @@ void __iomem *avic_base; static struct irq_domain *domain; -static u32 avic_saved_mask_reg[2]; - #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { @@ -113,6 +111,8 @@ static struct mxc_extra_irq avic_extra_irq = { }; #ifdef CONFIG_PM +static u32 avic_saved_mask_reg[2]; + static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 30b3242a7d49..8e3b65719106 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -278,8 +278,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); - clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 5bf4a97ab241..9fea2522d7a3 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -113,7 +113,6 @@ extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern u32 imx_get_cpu_arg(int cpu); extern void imx_set_cpu_arg(int cpu, u32 arg); extern void v7_cpu_resume(void); -extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP extern void v7_secondary_startup(void); extern void imx_scu_map_io(void); @@ -124,8 +123,6 @@ static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} static inline void imx_scu_standby_enable(void) {} #endif -extern void imx_enable_cpu(int cpu, bool enable); -extern void imx_set_cpu_jump(int cpu, void *jump_addr); extern void imx_src_init(void); extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c deleted file mode 100644 index b9ef692b61a2..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/bug.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include "hardware.h" - -static struct cpu_op mx51_cpu_op[] = { - { - .cpu_rate = 160000000,}, - { - .cpu_rate = 800000000,}, -}; - -struct cpu_op *mx51_get_cpu_op(int *op) -{ - *op = ARRAY_SIZE(mx51_cpu_op); - return mx51_cpu_op; -} diff --git a/arch/arm/mach-imx/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h deleted file mode 100644 index 97477fecb469..000000000000 --- a/arch/arm/mach-imx/cpu_op-mx51.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -extern struct cpu_op *mx51_get_cpu_op(int *op); diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c deleted file mode 100644 index d8c75c3c925d..000000000000 --- a/arch/arm/mach-imx/cpufreq.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/* - * A driver for the Freescale Semiconductor i.MXC CPUfreq module. - * The CPUFREQ driver is for controlling CPU frequency. It allows you to change - * the CPU clock speed on the fly. - */ - -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include "hardware.h" - -#define CLK32_FREQ 32768 -#define NANOSECOND (1000 * 1000 * 1000) - -struct cpu_op *(*get_cpu_op)(int *op); - -static int cpu_freq_khz_min; -static int cpu_freq_khz_max; - -static struct clk *cpu_clk; -static struct cpufreq_frequency_table *imx_freq_table; - -static int cpu_op_nr; -static struct cpu_op *cpu_op_tbl; - -static int set_cpu_freq(int freq) -{ - int ret = 0; - int org_cpu_rate; - - org_cpu_rate = clk_get_rate(cpu_clk); - if (org_cpu_rate == freq) - return ret; - - ret = clk_set_rate(cpu_clk, freq); - if (ret != 0) { - printk(KERN_DEBUG "cannot set CPU clock rate\n"); - return ret; - } - - return ret; -} - -static int mxc_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, imx_freq_table); -} - -static unsigned int mxc_get_speed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int mxc_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct cpufreq_freqs freqs; - int freq_Hz; - int ret = 0; - unsigned int index; - - cpufreq_frequency_table_target(policy, imx_freq_table, - target_freq, relation, &index); - freq_Hz = imx_freq_table[index].frequency * 1000; - - freqs.old = clk_get_rate(cpu_clk) / 1000; - freqs.new = freq_Hz / 1000; - freqs.cpu = 0; - freqs.flags = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = set_cpu_freq(freq_Hz); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int mxc_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret; - int i; - - printk(KERN_INFO "i.MXC CPU frequency driver\n"); - - if (policy->cpu != 0) - return -EINVAL; - - if (!get_cpu_op) - return -EINVAL; - - cpu_clk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpu_clk)) { - printk(KERN_ERR "%s: failed to get cpu clock\n", __func__); - return PTR_ERR(cpu_clk); - } - - cpu_op_tbl = get_cpu_op(&cpu_op_nr); - - cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000; - cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000; - - imx_freq_table = kmalloc( - sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1), - GFP_KERNEL); - if (!imx_freq_table) { - ret = -ENOMEM; - goto err1; - } - - for (i = 0; i < cpu_op_nr; i++) { - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) - cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000; - - if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max) - cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; - } - - imx_freq_table[i].index = i; - imx_freq_table[i].frequency = CPUFREQ_TABLE_END; - - policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; - - /* Manual states, that PLL stabilizes in two CLK32 periods */ - policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; - - ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - - if (ret < 0) { - printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", - __func__, ret); - goto err; - } - - cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu); - return 0; -err: - kfree(imx_freq_table); -err1: - clk_put(cpu_clk); - return ret; -} - -static int mxc_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - - set_cpu_freq(cpu_freq_khz_max * 1000); - clk_put(cpu_clk); - kfree(imx_freq_table); - return 0; -} - -static struct cpufreq_driver mxc_driver = { - .flags = CPUFREQ_STICKY, - .verify = mxc_verify_speed, - .target = mxc_set_target, - .get = mxc_get_speed, - .init = mxc_cpufreq_init, - .exit = mxc_cpufreq_exit, - .name = "imx", -}; - -static int mxc_cpufreq_driver_init(void) -{ - return cpufreq_register_driver(&mxc_driver); -} - -static void mxc_cpufreq_driver_exit(void) -{ - cpufreq_unregister_driver(&mxc_driver); -} - -module_init(mxc_cpufreq_driver_init); -module_exit(mxc_cpufreq_driver_exit); - -MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>"); -MODULE_DESCRIPTION("CPUfreq driver for i.MX"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 9b9ba1f4ffe1..3dd2b1b041d1 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -86,7 +86,3 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX config IMX_HAVE_PLATFORM_SPI_IMX bool - -config IMX_HAVE_PLATFORM_AHCI - bool - default y if ARCH_MX53 diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 6acf37e0c119..67416fb1dc69 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -29,5 +29,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 9bd5777ff0e7..453e20bc2657 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -344,13 +344,3 @@ struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); - -#include <linux/ahci_platform.h> -struct imx_ahci_imx_data { - const char *devid; - resource_size_t iobase; - resource_size_t irq; -}; -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata); diff --git a/arch/arm/mach-imx/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c deleted file mode 100644 index 3d87dd9c284a..000000000000 --- a/arch/arm/mach-imx/devices/platform-ahci-imx.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_ahci_imx_data_entry_single(soc, _devid) \ - { \ - .devid = _devid, \ - .iobase = soc ## _SATA_BASE_ADDR, \ - .irq = soc ## _INT_SATA, \ - } - -#ifdef CONFIG_SOC_IMX53 -const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst = - imx_ahci_imx_data_entry_single(MX53, "imx53-ahci"); -#endif - -enum { - HOST_CAP = 0x00, - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_PORTS_IMPL = 0x0c, - HOST_TIMER1MS = 0xe0, /* Timer 1-ms */ -}; - -static struct clk *sata_clk, *sata_ref_clk; - -/* AHCI module Initialization, if return 0, initialization is successful. */ -static int imx_sata_init(struct device *dev, void __iomem *addr) -{ - u32 tmpdata; - int ret = 0; - struct clk *clk; - - sata_clk = clk_get(dev, "ahci"); - if (IS_ERR(sata_clk)) { - dev_err(dev, "no sata clock.\n"); - return PTR_ERR(sata_clk); - } - ret = clk_prepare_enable(sata_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata clock.\n"); - goto put_sata_clk; - } - - /* Get the AHCI SATA PHY CLK */ - sata_ref_clk = clk_get(dev, "ahci_phy"); - if (IS_ERR(sata_ref_clk)) { - dev_err(dev, "no sata ref clock.\n"); - ret = PTR_ERR(sata_ref_clk); - goto release_sata_clk; - } - ret = clk_prepare_enable(sata_ref_clk); - if (ret) { - dev_err(dev, "can't prepare/enable sata ref clock.\n"); - goto put_sata_ref_clk; - } - - /* Get the AHB clock rate, and configure the TIMER1MS reg later */ - clk = clk_get(dev, "ahci_dma"); - if (IS_ERR(clk)) { - dev_err(dev, "no dma clock.\n"); - ret = PTR_ERR(clk); - goto release_sata_ref_clk; - } - tmpdata = clk_get_rate(clk) / 1000; - clk_put(clk); - - writel(tmpdata, addr + HOST_TIMER1MS); - - tmpdata = readl(addr + HOST_CAP); - if (!(tmpdata & HOST_CAP_SSS)) { - tmpdata |= HOST_CAP_SSS; - writel(tmpdata, addr + HOST_CAP); - } - - if (!(readl(addr + HOST_PORTS_IMPL) & 0x1)) - writel((readl(addr + HOST_PORTS_IMPL) | 0x1), - addr + HOST_PORTS_IMPL); - - return 0; - -release_sata_ref_clk: - clk_disable_unprepare(sata_ref_clk); -put_sata_ref_clk: - clk_put(sata_ref_clk); -release_sata_clk: - clk_disable_unprepare(sata_clk); -put_sata_clk: - clk_put(sata_clk); - - return ret; -} - -static void imx_sata_exit(struct device *dev) -{ - clk_disable_unprepare(sata_ref_clk); - clk_put(sata_ref_clk); - - clk_disable_unprepare(sata_clk); - clk_put(sata_clk); - -} -struct platform_device *__init imx_add_ahci_imx( - const struct imx_ahci_imx_data *data, - const struct ahci_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device_dmamask(data->devid, 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} - -struct platform_device *__init imx53_add_ahci_imx(void) -{ - struct ahci_platform_data pdata = { - .init = imx_sata_init, - .exit = imx_sata_exit, - }; - - return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata); -} diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 911e9b31b03f..356131f7b591 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -102,7 +102,6 @@ #include "mxc.h" -#include "mx6q.h" #include "mx51.h" #include "mx53.h" #include "mx3x.h" diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9b7393234f6f..9b5ddf5bbd33 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -33,7 +33,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx51.h" @@ -285,10 +284,6 @@ static void __init eukrea_cpuimx51sd_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif - imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); imx51_add_imx2_wdt(0); diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 6c4d7feb4520..f3d264a636fa 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -27,7 +27,6 @@ #include "common.h" #include "devices-imx51.h" -#include "cpu_op-mx51.h" #include "hardware.h" #include "iomux-mx51.h" @@ -371,9 +370,6 @@ static void __init mx51_babbage_init(void) imx51_soc_init(); -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif imx51_babbage_common_init(); imx51_add_imx_uart(0, &uart_pdata); diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h deleted file mode 100644 index 19d3f54db5af..000000000000 --- a/arch/arm/mach-imx/mx6q.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_MX6Q_H__ -#define __MACH_MX6Q_H__ - -#define MX6Q_IO_P2V(x) IMX_IO_P2V(x) -#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x)) - -/* - * The following are the blocks that need to be statically mapped. - * For other blocks, the base address really should be retrieved from - * device tree. - */ -#define MX6Q_SCU_BASE_ADDR 0x00a00000 -#define MX6Q_SCU_SIZE 0x1000 -#define MX6Q_CCM_BASE_ADDR 0x020c4000 -#define MX6Q_CCM_SIZE 0x4000 -#define MX6Q_ANATOP_BASE_ADDR 0x020c8000 -#define MX6Q_ANATOP_SIZE 0x1000 - -#endif /* __MACH_MX6Q_H__ */ |