summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/ABI/testing/sysfs-driver-toshiba_haps20
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/platform/x86/Kconfig18
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/asus-wmi.c344
-rw-r--r--drivers/platform/x86/dell-laptop.c94
-rw-r--r--drivers/platform/x86/dell-rbtn.c423
-rw-r--r--drivers/platform/x86/dell-rbtn.h24
-rw-r--r--drivers/platform/x86/ideapad-laptop.c10
-rw-r--r--drivers/platform/x86/pvpanic.c10
-rw-r--r--drivers/platform/x86/toshiba_acpi.c246
-rw-r--r--drivers/platform/x86/toshiba_bluetooth.c174
-rw-r--r--drivers/platform/x86/toshiba_haps.c32
13 files changed, 1118 insertions, 286 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_haps b/Documentation/ABI/testing/sysfs-driver-toshiba_haps
new file mode 100644
index 000000000000..a662370b4dbf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-toshiba_haps
@@ -0,0 +1,20 @@
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/protection_level
+Date: August 16, 2014
+KernelVersion: 3.17
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the built-in accelerometer protection level,
+ valid values are:
+ * 0 -> Disabled
+ * 1 -> Low
+ * 2 -> Medium
+ * 3 -> High
+ The default potection value is set to 2 (Medium).
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/reset_protection
+Date: August 16, 2014
+KernelVersion: 3.17
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file turns off the built-in accelerometer for a few
+ seconds and then restore normal operation. Accepting 1 as the
+ only parameter.
diff --git a/MAINTAINERS b/MAINTAINERS
index 058b0fbc52ff..7628df31b630 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3216,6 +3216,11 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/dell-laptop.c
+DELL LAPTOP RBTN DRIVER
+M: Pali Rohár <pali.rohar@gmail.com>
+S: Maintained
+F: drivers/platform/x86/dell-rbtn.*
+
DELL LAPTOP FREEFALL DRIVER
M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
@@ -6786,9 +6791,8 @@ S: Maintained
F: drivers/platform/x86/msi-laptop.c
MSI WMI SUPPORT
-M: Anisse Astier <anisse@astier.eu>
L: platform-driver-x86@vger.kernel.org
-S: Supported
+S: Orphan
F: drivers/platform/x86/msi-wmi.c
MSI001 MEDIA DRIVER
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7137a077b9a6..1e2f57f6d297 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -141,6 +141,22 @@ config DELL_SMO8800
To compile this driver as a module, choose M here: the module will
be called dell-smo8800.
+config DELL_RBTN
+ tristate "Dell Airplane Mode Switch driver"
+ depends on ACPI
+ depends on INPUT
+ depends on RFKILL
+ ---help---
+ Say Y here if you want to support Dell Airplane Mode Switch ACPI
+ device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+ This driver register rfkill device or input hotkey device depending
+ on hardware type (hw switch slider or keyboard toggle button). For
+ rfkill devices it receive HW switch events and set correct hard
+ rfkill state.
+
+ To compile this driver as a module, choose M here: the module will
+ be called dell-rbtn.
+
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
@@ -622,7 +638,6 @@ config ACPI_TOSHIBA
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
- depends on RFKILL || RFKILL = n
depends on SERIO_I8042 || SERIO_I8042 = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_POLLDEV
@@ -653,6 +668,7 @@ config ACPI_TOSHIBA
config TOSHIBA_BT_RFKILL
tristate "Toshiba Bluetooth RFKill switch support"
depends on ACPI
+ depends on RFKILL || RFKILL = n
---help---
This driver adds support for Bluetooth events for the RFKill
switch on modern Toshiba laptops with full ACPI support and
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index f82232b1fc4d..b3e54ed863c3 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
obj-$(CONFIG_DELL_SMO8800) += dell-smo8800.o
+obj-$(CONFIG_DELL_RBTN) += dell-rbtn.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_ACCEL) += hp_accel.o
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 6f8558f744a4..efbc3f0c592b 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -78,6 +78,7 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_METHODID_GPID 0x44495047 /* Get Panel ID?? (Resol) */
#define ASUS_WMI_METHODID_QMOD 0x444F4D51 /* Quiet MODe */
#define ASUS_WMI_METHODID_SPLV 0x4C425053 /* Set Panel Light Value */
+#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* FaN? */
#define ASUS_WMI_METHODID_SFUN 0x4E554653 /* FUNCtionalities */
#define ASUS_WMI_METHODID_SDSP 0x50534453 /* Set DiSPlay output */
#define ASUS_WMI_METHODID_GDSP 0x50534447 /* Get DiSPlay output */
@@ -150,12 +151,38 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_DSTS_BRIGHTNESS_MASK 0x000000FF
#define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00
+#define ASUS_FAN_DESC "cpu_fan"
+#define ASUS_FAN_MFUN 0x13
+#define ASUS_FAN_SFUN_READ 0x06
+#define ASUS_FAN_SFUN_WRITE 0x07
+#define ASUS_FAN_CTRL_MANUAL 1
+#define ASUS_FAN_CTRL_AUTO 2
+
struct bios_args {
u32 arg0;
u32 arg1;
} __packed;
/*
+ * Struct that's used for all methods called via AGFN. Naming is
+ * identically to the AML code.
+ */
+struct agfn_args {
+ u16 mfun; /* probably "Multi-function" to be called */
+ u16 sfun; /* probably "Sub-function" to be called */
+ u16 len; /* size of the hole struct, including subfunction fields */
+ u8 stas; /* not used by now */
+ u8 err; /* zero on success */
+} __packed;
+
+/* struct used for calling fan read and write methods */
+struct fan_args {
+ struct agfn_args agfn; /* common fields */
+ u8 fan; /* fan number: 0: set auto mode 1: 1st fan */
+ u32 speed; /* read: RPM/100 - write: 0-255 */
+} __packed;
+
+/*
* <platform>/ - debugfs root directory
* dev_id - current dev_id
* ctrl_param - current ctrl_param
@@ -204,6 +231,10 @@ struct asus_wmi {
struct asus_rfkill gps;
struct asus_rfkill uwb;
+ bool asus_hwmon_fan_manual_mode;
+ int asus_hwmon_num_fans;
+ int asus_hwmon_pwm;
+
struct hotplug_slot *hotplug_slot;
struct mutex hotplug_lock;
struct mutex wmi_lock;
@@ -294,6 +325,36 @@ exit:
return 0;
}
+static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
+{
+ struct acpi_buffer input;
+ u64 phys_addr;
+ u32 retval;
+ u32 status = -1;
+
+ /*
+ * Copy to dma capable address otherwise memory corruption occurs as
+ * bios has to be able to access it.
+ */
+ input.pointer = kzalloc(args.length, GFP_DMA | GFP_KERNEL);
+ input.length = args.length;
+ if (!input.pointer)
+ return -ENOMEM;
+ phys_addr = virt_to_phys(input.pointer);
+ memcpy(input.pointer, args.pointer, args.length);
+
+ status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN,
+ phys_addr, 0, &retval);
+ if (!status)
+ memcpy(args.pointer, input.pointer, args.length);
+
+ kfree(input.pointer);
+ if (status)
+ return -ENXIO;
+
+ return retval;
+}
+
static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
{
return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval);
@@ -1022,35 +1083,228 @@ exit:
/*
* Hwmon device
*/
-static ssize_t asus_hwmon_pwm1(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_READ,
+ .fan = fan,
+ .speed = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ int status;
+
+ if (fan != 1)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (speed)
+ *speed = args.speed;
+
+ return 0;
+}
+
+static int asus_hwmon_agfn_fan_speed_write(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_WRITE,
+ .fan = fan,
+ .speed = speed ? *speed : 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ int status;
+
+ /* 1: for setting 1st fan's speed 0: setting auto mode */
+ if (fan != 1 && fan != 0)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (speed && fan == 1)
+ asus->asus_hwmon_pwm = *speed;
+
+ return 0;
+}
+
+/*
+ * Check if we can read the speed of one fan. If true we assume we can also
+ * control it.
+ */
+static int asus_hwmon_get_fan_number(struct asus_wmi *asus, int *num_fans)
+{
+ int status;
+ int speed = 0;
+
+ *num_fans = 0;
+
+ status = asus_hwmon_agfn_fan_speed_read(asus, 1, &speed);
+ if (!status)
+ *num_fans = 1;
+
+ return 0;
+}
+
+static int asus_hwmon_fan_set_auto(struct asus_wmi *asus)
+{
+ int status;
+
+ status = asus_hwmon_agfn_fan_speed_write(asus, 0, NULL);
+ if (status)
+ return -ENXIO;
+
+ asus->asus_hwmon_fan_manual_mode = false;
+
+ return 0;
+}
+
+static int asus_hwmon_fan_rpm_show(struct device *dev, int fan)
{
struct asus_wmi *asus = dev_get_drvdata(dev);
- u32 value;
+ int value;
+ int ret;
+
+ /* no speed readable on manual mode */
+ if (asus->asus_hwmon_fan_manual_mode)
+ return -ENXIO;
+
+ ret = asus_hwmon_agfn_fan_speed_read(asus, fan+1, &value);
+ if (ret) {
+ pr_warn("reading fan speed failed: %d\n", ret);
+ return -ENXIO;
+ }
+
+ return value;
+}
+
+static void asus_hwmon_pwm_show(struct asus_wmi *asus, int fan, int *value)
+{
int err;
- err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value);
+ if (asus->asus_hwmon_pwm >= 0) {
+ *value = asus->asus_hwmon_pwm;
+ return;
+ }
+ err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, value);
if (err < 0)
- return err;
+ return;
- value &= 0xFF;
-
- if (value == 1) /* Low Speed */
- value = 85;
- else if (value == 2)
- value = 170;
- else if (value == 3)
- value = 255;
- else if (value != 0) {
- pr_err("Unknown fan speed %#x\n", value);
- value = -1;
+ *value &= 0xFF;
+
+ if (*value == 1) /* Low Speed */
+ *value = 85;
+ else if (*value == 2)
+ *value = 170;
+ else if (*value == 3)
+ *value = 255;
+ else if (*value) {
+ pr_err("Unknown fan speed %#x\n", *value);
+ *value = -1;
}
+}
+
+static ssize_t pwm1_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+
+ asus_hwmon_pwm_show(asus, 0, &value);
return sprintf(buf, "%d\n", value);
}
+static ssize_t pwm1_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count) {
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+ int state;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &value);
+
+ if (ret)
+ return ret;
+
+ value = clamp(value, 0, 255);
+
+ state = asus_hwmon_agfn_fan_speed_write(asus, 1, &value);
+ if (state)
+ pr_warn("Setting fan speed failed: %d\n", state);
+ else
+ asus->asus_hwmon_fan_manual_mode = true;
+
+ return count;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int value = asus_hwmon_fan_rpm_show(dev, 0);
+
+ return sprintf(buf, "%d\n", value < 0 ? -1 : value*100);
+
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+
+ if (asus->asus_hwmon_fan_manual_mode)
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_MANUAL);
+
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_AUTO);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int status = 0;
+ int state;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &state);
+
+ if (ret)
+ return ret;
+
+ if (state == ASUS_FAN_CTRL_MANUAL)
+ asus->asus_hwmon_fan_manual_mode = true;
+ else
+ status = asus_hwmon_fan_set_auto(asus);
+
+ if (status)
+ return status;
+
+ return count;
+}
+
+static ssize_t fan1_label_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", ASUS_FAN_DESC);
+}
+
static ssize_t asus_hwmon_temp1(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -1069,11 +1323,21 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
return sprintf(buf, "%d\n", value);
}
-static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+/* Fan1 */
+static DEVICE_ATTR_RW(pwm1);
+static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RO(fan1_input);
+static DEVICE_ATTR_RO(fan1_label);
+
+/* Temperature */
static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
static struct attribute *hwmon_attributes[] = {
&dev_attr_pwm1.attr,
+ &dev_attr_pwm1_enable.attr,
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_label.attr,
+
&dev_attr_temp1_input.attr,
NULL
};
@@ -1084,19 +1348,28 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct platform_device *pdev = to_platform_device(dev->parent);
struct asus_wmi *asus = platform_get_drvdata(pdev);
- bool ok = true;
int dev_id = -1;
+ int fan_attr = -1;
u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+ bool ok = true;
if (attr == &dev_attr_pwm1.attr)
dev_id = ASUS_WMI_DEVID_FAN_CTRL;
else if (attr == &dev_attr_temp1_input.attr)
dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
+
+ if (attr == &dev_attr_fan1_input.attr
+ || attr == &dev_attr_fan1_label.attr
+ || attr == &dev_attr_pwm1.attr
+ || attr == &dev_attr_pwm1_enable.attr) {
+ fan_attr = 1;
+ }
+
if (dev_id != -1) {
int err = asus_wmi_get_devstate(asus, dev_id, &value);
- if (err < 0)
+ if (err < 0 && fan_attr == -1)
return 0; /* can't return negative here */
}
@@ -1112,10 +1385,16 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
|| (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
ok = false;
+ else
+ ok = fan_attr <= asus->asus_hwmon_num_fans;
} else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
/* If value is zero, something is clearly wrong */
- if (value == 0)
+ if (!value)
ok = false;
+ } else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
+ ok = true;
+ } else {
+ ok = false;
}
return ok ? attr->mode : 0;
@@ -1723,6 +2002,25 @@ error_debugfs:
return -ENOMEM;
}
+static int asus_wmi_fan_init(struct asus_wmi *asus)
+{
+ int status;
+
+ asus->asus_hwmon_pwm = -1;
+ asus->asus_hwmon_num_fans = -1;
+ asus->asus_hwmon_fan_manual_mode = false;
+
+ status = asus_hwmon_get_fan_number(asus, &asus->asus_hwmon_num_fans);
+ if (status) {
+ asus->asus_hwmon_num_fans = 0;
+ pr_warn("Could not determine number of fans: %d\n", status);
+ return -ENXIO;
+ }
+
+ pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+ return 0;
+}
+
/*
* WMI Driver
*/
@@ -1756,6 +2054,9 @@ static int asus_wmi_add(struct platform_device *pdev)
if (err)
goto fail_input;
+ err = asus_wmi_fan_init(asus); /* probably no problems on error */
+ asus_hwmon_fan_set_auto(asus);
+
err = asus_wmi_hwmon_init(asus);
if (err)
goto fail_hwmon;
@@ -1831,6 +2132,7 @@ static int asus_wmi_remove(struct platform_device *device)
asus_wmi_rfkill_exit(asus);
asus_wmi_debugfs_exit(asus);
asus_wmi_platform_exit(asus);
+ asus_hwmon_fan_set_auto(asus);
kfree(asus);
return 0;
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 01d081052b50..35de903cb506 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -33,6 +33,7 @@
#include <linux/seq_file.h>
#include <acpi/video.h>
#include "../../firmware/dcdbas.h"
+#include "dell-rbtn.h"
#define BRIGHTNESS_TOKEN 0x7d
#define KBD_LED_OFF_TOKEN 0x01E1
@@ -643,6 +644,20 @@ static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
return false;
}
+static int (*dell_rbtn_notifier_register_func)(struct notifier_block *);
+static int (*dell_rbtn_notifier_unregister_func)(struct notifier_block *);
+
+static int dell_laptop_rbtn_notifier_call(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ schedule_delayed_work(&dell_rfkill_work, 0);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block dell_laptop_rbtn_notifier = {
+ .notifier_call = dell_laptop_rbtn_notifier_call,
+};
+
static int __init dell_setup_rfkill(void)
{
int status, ret, whitelisted;
@@ -719,10 +734,62 @@ static int __init dell_setup_rfkill(void)
goto err_wwan;
}
- ret = i8042_install_filter(dell_laptop_i8042_filter);
- if (ret) {
- pr_warn("Unable to install key filter\n");
+ /*
+ * Dell Airplane Mode Switch driver (dell-rbtn) supports ACPI devices
+ * which can receive events from HW slider switch.
+ *
+ * Dell SMBIOS on whitelisted models supports controlling radio devices
+ * but does not support receiving HW button switch events. We can use
+ * i8042 filter hook function to receive keyboard data and handle
+ * keycode for HW button.
+ *
+ * So if it is possible we will use Dell Airplane Mode Switch ACPI
+ * driver for receiving HW events and Dell SMBIOS for setting rfkill
+ * states. If ACPI driver or device is not available we will fallback to
+ * i8042 filter hook function.
+ *
+ * To prevent duplicate rfkill devices which control and do same thing,
+ * dell-rbtn driver will automatically remove its own rfkill devices
+ * once function dell_rbtn_notifier_register() is called.
+ */
+
+ dell_rbtn_notifier_register_func =
+ symbol_request(dell_rbtn_notifier_register);
+ if (dell_rbtn_notifier_register_func) {
+ dell_rbtn_notifier_unregister_func =
+ symbol_request(dell_rbtn_notifier_unregister);
+ if (!dell_rbtn_notifier_unregister_func) {
+ symbol_put(dell_rbtn_notifier_register);
+ dell_rbtn_notifier_register_func = NULL;
+ }
+ }
+
+ if (dell_rbtn_notifier_register_func) {
+ ret = dell_rbtn_notifier_register_func(
+ &dell_laptop_rbtn_notifier);
+ symbol_put(dell_rbtn_notifier_register);
+ dell_rbtn_notifier_register_func = NULL;
+ if (ret != 0) {
+ symbol_put(dell_rbtn_notifier_unregister);
+ dell_rbtn_notifier_unregister_func = NULL;
+ }
+ } else {
+ pr_info("Symbols from dell-rbtn acpi driver are not available\n");
+ ret = -ENODEV;
+ }
+
+ if (ret == 0) {
+ pr_info("Using dell-rbtn acpi driver for receiving events\n");
+ } else if (ret != -ENODEV) {
+ pr_warn("Unable to register dell rbtn notifier\n");
goto err_filter;
+ } else {
+ ret = i8042_install_filter(dell_laptop_i8042_filter);
+ if (ret) {
+ pr_warn("Unable to install key filter\n");
+ goto err_filter;
+ }
+ pr_info("Using i8042 filter function for receiving events\n");
}
return 0;
@@ -745,6 +812,14 @@ err_wifi:
static void dell_cleanup_rfkill(void)
{
+ if (dell_rbtn_notifier_unregister_func) {
+ dell_rbtn_notifier_unregister_func(&dell_laptop_rbtn_notifier);
+ symbol_put(dell_rbtn_notifier_unregister);
+ dell_rbtn_notifier_unregister_func = NULL;
+ } else {
+ i8042_remove_filter(dell_laptop_i8042_filter);
+ }
+ cancel_delayed_work_sync(&dell_rfkill_work);
if (wifi_rfkill) {
rfkill_unregister(wifi_rfkill);
rfkill_destroy(wifi_rfkill);
@@ -1957,8 +2032,6 @@ static int __init dell_init(void)
return 0;
fail_backlight:
- i8042_remove_filter(dell_laptop_i8042_filter);
- cancel_delayed_work_sync(&dell_rfkill_work);
dell_cleanup_rfkill();
fail_rfkill:
free_page((unsigned long)bufferpage);
@@ -1979,8 +2052,6 @@ static void __exit dell_exit(void)
if (quirks && quirks->touchpad_led)
touchpad_led_exit();
kbd_led_exit();
- i8042_remove_filter(dell_laptop_i8042_filter);
- cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
dell_cleanup_rfkill();
if (platform_device) {
@@ -1991,7 +2062,14 @@ static void __exit dell_exit(void)
free_page((unsigned long)buffer);
}
-module_init(dell_init);
+/* dell-rbtn.c driver export functions which will not work correctly (and could
+ * cause kernel crash) if they are called before dell-rbtn.c init code. This is
+ * not problem when dell-rbtn.c is compiled as external module. When both files
+ * (dell-rbtn.c and dell-laptop.c) are compiled statically into kernel, then we
+ * need to ensure that dell_init() will be called after initializing dell-rbtn.
+ * This can be achieved by late_initcall() instead module_init().
+ */
+late_initcall(dell_init);
module_exit(dell_exit);
MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/platform/x86/dell-rbtn.c b/drivers/platform/x86/dell-rbtn.c
new file mode 100644
index 000000000000..cd410e392550
--- /dev/null
+++ b/drivers/platform/x86/dell-rbtn.c
@@ -0,0 +1,423 @@
+/*
+ Dell Airplane Mode Switch driver
+ Copyright (C) 2014-2015 Pali Rohár <pali.rohar@gmail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/input.h>
+
+enum rbtn_type {
+ RBTN_UNKNOWN,
+ RBTN_TOGGLE,
+ RBTN_SLIDER,
+};
+
+struct rbtn_data {
+ enum rbtn_type type;
+ struct rfkill *rfkill;
+ struct input_dev *input_dev;
+};
+
+
+/*
+ * acpi functions
+ */
+
+static enum rbtn_type rbtn_check(struct acpi_device *device)
+{
+ unsigned long long output;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "CRBT", NULL, &output);
+ if (ACPI_FAILURE(status))
+ return RBTN_UNKNOWN;
+
+ switch (output) {
+ case 0:
+ case 1:
+ return RBTN_TOGGLE;
+ case 2:
+ case 3:
+ return RBTN_SLIDER;
+ default:
+ return RBTN_UNKNOWN;
+ }
+}
+
+static int rbtn_get(struct acpi_device *device)
+{
+ unsigned long long output;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "GRBT", NULL, &output);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return !output;
+}
+
+static int rbtn_acquire(struct acpi_device *device, bool enable)
+{
+ struct acpi_object_list input;
+ union acpi_object param;
+ acpi_status status;
+
+ param.type = ACPI_TYPE_INTEGER;
+ param.integer.value = enable;
+ input.count = 1;
+ input.pointer = &param;
+
+ status = acpi_evaluate_object(device->handle, "ARBT", &input, NULL);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return 0;
+}
+
+
+/*
+ * rfkill device
+ */
+
+static void rbtn_rfkill_query(struct rfkill *rfkill, void *data)
+{
+ struct acpi_device *device = data;
+ int state;
+
+ state = rbtn_get(device);
+ if (state < 0)
+ return;
+
+ rfkill_set_states(rfkill, state, state);
+}
+
+static int rbtn_rfkill_set_block(void *data, bool blocked)
+{
+ /* NOTE: setting soft rfkill state is not supported */
+ return -EINVAL;
+}
+
+static struct rfkill_ops rbtn_ops = {
+ .query = rbtn_rfkill_query,
+ .set_block = rbtn_rfkill_set_block,
+};
+
+static int rbtn_rfkill_init(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+ int ret;
+
+ if (rbtn_data->rfkill)
+ return 0;
+
+ /*
+ * NOTE: rbtn controls all radio devices, not only WLAN
+ * but rfkill interface does not support "ANY" type
+ * so "WLAN" type is used
+ */
+ rbtn_data->rfkill = rfkill_alloc("dell-rbtn", &device->dev,
+ RFKILL_TYPE_WLAN, &rbtn_ops, device);
+ if (!rbtn_data->rfkill)
+ return -ENOMEM;
+
+ ret = rfkill_register(rbtn_data->rfkill);
+ if (ret) {
+ rfkill_destroy(rbtn_data->rfkill);
+ rbtn_data->rfkill = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rbtn_rfkill_exit(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (!rbtn_data->rfkill)
+ return;
+
+ rfkill_unregister(rbtn_data->rfkill);
+ rfkill_destroy(rbtn_data->rfkill);
+ rbtn_data->rfkill = NULL;
+}
+
+static void rbtn_rfkill_event(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (rbtn_data->rfkill)
+ rbtn_rfkill_query(rbtn_data->rfkill, device);
+}
+
+
+/*
+ * input device
+ */
+
+static int rbtn_input_init(struct rbtn_data *rbtn_data)
+{
+ int ret;
+
+ rbtn_data->input_dev = input_allocate_device();
+ if (!rbtn_data->input_dev)
+ return -ENOMEM;
+
+ rbtn_data->input_dev->name = "DELL Wireless hotkeys";
+ rbtn_data->input_dev->phys = "dellabce/input0";
+ rbtn_data->input_dev->id.bustype = BUS_HOST;
+ rbtn_data->input_dev->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_RFKILL, rbtn_data->input_dev->keybit);
+
+ ret = input_register_device(rbtn_data->input_dev);
+ if (ret) {
+ input_free_device(rbtn_data->input_dev);
+ rbtn_data->input_dev = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rbtn_input_exit(struct rbtn_data *rbtn_data)
+{
+ input_unregister_device(rbtn_data->input_dev);
+ rbtn_data->input_dev = NULL;
+}
+
+static void rbtn_input_event(struct rbtn_data *rbtn_data)
+{
+ input_report_key(rbtn_data->input_dev, KEY_RFKILL, 1);
+ input_sync(rbtn_data->input_dev);
+ input_report_key(rbtn_data->input_dev, KEY_RFKILL, 0);
+ input_sync(rbtn_data->input_dev);
+}
+
+
+/*
+ * acpi driver
+ */
+
+static int rbtn_add(struct acpi_device *device);
+static int rbtn_remove(struct acpi_device *device);
+static void rbtn_notify(struct acpi_device *device, u32 event);
+
+static const struct acpi_device_id rbtn_ids[] = {
+ { "DELRBTN", 0 },
+ { "DELLABCE", 0 },
+ { "", 0 },
+};
+
+static struct acpi_driver rbtn_driver = {
+ .name = "dell-rbtn",
+ .ids = rbtn_ids,
+ .ops = {
+ .add = rbtn_add,
+ .remove = rbtn_remove,
+ .notify = rbtn_notify,
+ },
+ .owner = THIS_MODULE,
+};
+
+
+/*
+ * notifier export functions
+ */
+
+static bool auto_remove_rfkill = true;
+
+static ATOMIC_NOTIFIER_HEAD(rbtn_chain_head);
+
+static int rbtn_inc_count(struct device *dev, void *data)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = device->driver_data;
+ int *count = data;
+
+ if (rbtn_data->type == RBTN_SLIDER)
+ (*count)++;
+
+ return 0;
+}
+
+static int rbtn_switch_dev(struct device *dev, void *data)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = device->driver_data;
+ bool enable = data;
+
+ if (rbtn_data->type != RBTN_SLIDER)
+ return 0;
+
+ if (enable)
+ rbtn_rfkill_init(device);
+ else
+ rbtn_rfkill_exit(device);
+
+ return 0;
+}
+
+int dell_rbtn_notifier_register(struct notifier_block *nb)
+{
+ bool first;
+ int count;
+ int ret;
+
+ count = 0;
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL, &count,
+ rbtn_inc_count);
+ if (ret || count == 0)
+ return -ENODEV;
+
+ first = !rbtn_chain_head.head;
+
+ ret = atomic_notifier_chain_register(&rbtn_chain_head, nb);
+ if (ret != 0)
+ return ret;
+
+ if (auto_remove_rfkill && first)
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+ (void *)false, rbtn_switch_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_register);
+
+int dell_rbtn_notifier_unregister(struct notifier_block *nb)
+{
+ int ret;
+
+ ret = atomic_notifier_chain_unregister(&rbtn_chain_head, nb);
+ if (ret != 0)
+ return ret;
+
+ if (auto_remove_rfkill && !rbtn_chain_head.head)
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+ (void *)true, rbtn_switch_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_unregister);
+
+
+/*
+ * acpi driver functions
+ */
+
+static int rbtn_add(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data;
+ enum rbtn_type type;
+ int ret = 0;
+
+ type = rbtn_check(device);
+ if (type == RBTN_UNKNOWN) {
+ dev_info(&device->dev, "Unknown device type\n");
+ return -EINVAL;
+ }
+
+ ret = rbtn_acquire(device, true);
+ if (ret < 0) {
+ dev_err(&device->dev, "Cannot enable device\n");
+ return ret;
+ }
+
+ rbtn_data = devm_kzalloc(&device->dev, sizeof(*rbtn_data), GFP_KERNEL);
+ if (!rbtn_data)
+ return -ENOMEM;
+
+ rbtn_data->type = type;
+ device->driver_data = rbtn_data;
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ ret = rbtn_input_init(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ if (auto_remove_rfkill && rbtn_chain_head.head)
+ ret = 0;
+ else
+ ret = rbtn_rfkill_init(device);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+
+}
+
+static int rbtn_remove(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ rbtn_input_exit(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ rbtn_rfkill_exit(device);
+ break;
+ default:
+ break;
+ }
+
+ rbtn_acquire(device, false);
+ device->driver_data = NULL;
+
+ return 0;
+}
+
+static void rbtn_notify(struct acpi_device *device, u32 event)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (event != 0x80) {
+ dev_info(&device->dev, "Received unknown event (0x%x)\n",
+ event);
+ return;
+ }
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ rbtn_input_event(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ rbtn_rfkill_event(device);
+ atomic_notifier_call_chain(&rbtn_chain_head, event, device);
+ break;
+ default:
+ break;
+ }
+}
+
+
+/*
+ * module functions
+ */
+
+module_acpi_driver(rbtn_driver);
+
+module_param(auto_remove_rfkill, bool, 0444);
+
+MODULE_PARM_DESC(auto_remove_rfkill, "Automatically remove rfkill devices when "
+ "other modules start receiving events "
+ "from this module and re-add them when "
+ "the last module stops receiving events "
+ "(default true)");
+MODULE_DEVICE_TABLE(acpi, rbtn_ids);
+MODULE_DESCRIPTION("Dell Airplane Mode Switch driver");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-rbtn.h b/drivers/platform/x86/dell-rbtn.h
new file mode 100644
index 000000000000..c59cc6b8ec2b
--- /dev/null
+++ b/drivers/platform/x86/dell-rbtn.h
@@ -0,0 +1,24 @@
+/*
+ Dell Airplane Mode Switch driver
+ Copyright (C) 2014-2015 Pali Rohár <pali.rohar@gmail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+#ifndef _DELL_RBTN_H_
+#define _DELL_RBTN_H_
+
+struct notifier_block;
+
+int dell_rbtn_notifier_register(struct notifier_block *nb);
+int dell_rbtn_notifier_unregister(struct notifier_block *nb);
+
+#endif
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index bea022830944..76b57388d01b 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -465,8 +465,9 @@ static const struct ideapad_rfk_data ideapad_rfk_data[] = {
static int ideapad_rfk_set(void *data, bool blocked)
{
struct ideapad_rfk_priv *priv = data;
+ int opcode = ideapad_rfk_data[priv->dev].opcode;
- return write_ec_cmd(priv->priv->adev->handle, priv->dev, !blocked);
+ return write_ec_cmd(priv->priv->adev->handle, opcode, !blocked);
}
static struct rfkill_ops ideapad_rfk_ops = {
@@ -838,6 +839,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
},
},
{
+ .ident = "Lenovo G50-30",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G50-30"),
+ },
+ },
+ {
.ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
diff --git a/drivers/platform/x86/pvpanic.c b/drivers/platform/x86/pvpanic.c
index 073a90a63dbc..fd86daba7ffd 100644
--- a/drivers/platform/x86/pvpanic.c
+++ b/drivers/platform/x86/pvpanic.c
@@ -92,13 +92,13 @@ pvpanic_walk_resources(struct acpi_resource *res, void *context)
static int pvpanic_add(struct acpi_device *device)
{
- acpi_status status;
- u64 ret;
+ int ret;
- status = acpi_evaluate_integer(device->handle, "_STA", NULL,
- &ret);
+ ret = acpi_bus_get_status(device);
+ if (ret < 0)
+ return ret;
- if (ACPI_FAILURE(status) || (ret & 0x0B) != 0x0B)
+ if (!device->status.enabled || !device->status.functional)
return -ENODEV;
acpi_walk_resources(device->handle, METHOD_NAME__CRS,
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 59bf27ed72d6..3ad7b1fa24ce 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -31,7 +31,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define TOSHIBA_ACPI_VERSION "0.21"
+#define TOSHIBA_ACPI_VERSION "0.22"
#define PROC_INTERFACE_VERSION 1
#include <linux/kernel.h>
@@ -41,7 +41,6 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/backlight.h>
-#include <linux/rfkill.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/leds.h>
@@ -82,7 +81,7 @@ MODULE_LICENSE("GPL");
#define TCI_WORDS 6
-/* operations */
+/* Operations */
#define HCI_SET 0xff00
#define HCI_GET 0xfe00
#define SCI_OPEN 0xf100
@@ -90,7 +89,7 @@ MODULE_LICENSE("GPL");
#define SCI_GET 0xf300
#define SCI_SET 0xf400
-/* return codes */
+/* Return codes */
#define TOS_SUCCESS 0x0000
#define TOS_OPEN_CLOSE_OK 0x0044
#define TOS_FAILURE 0x1000
@@ -105,7 +104,7 @@ MODULE_LICENSE("GPL");
#define TOS_NOT_INITIALIZED 0x8d50
#define TOS_NOT_INSTALLED 0x8e00
-/* registers */
+/* Registers */
#define HCI_FAN 0x0004
#define HCI_TR_BACKLIGHT 0x0005
#define HCI_SYSTEM_EVENT 0x0016
@@ -127,7 +126,7 @@ MODULE_LICENSE("GPL");
#define SCI_TOUCHPAD 0x050e
#define SCI_KBD_FUNCTION_KEYS 0x0522
-/* field definitions */
+/* Field definitions */
#define HCI_ACCEL_MASK 0x7fff
#define HCI_HOTKEY_DISABLE 0x0b
#define HCI_HOTKEY_ENABLE 0x09
@@ -165,7 +164,6 @@ MODULE_LICENSE("GPL");
struct toshiba_acpi_dev {
struct acpi_device *acpi_dev;
const char *method_hci;
- struct rfkill *bt_rfk;
struct input_dev *hotkey_dev;
struct work_struct hotkey_work;
struct backlight_device *backlight_dev;
@@ -202,8 +200,6 @@ struct toshiba_acpi_dev {
unsigned int panel_power_on_supported:1;
unsigned int usb_three_supported:1;
unsigned int sysfs_created:1;
-
- struct mutex mutex;
};
static struct toshiba_acpi_dev *toshiba_acpi;
@@ -330,13 +326,13 @@ static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
}
/*
- * Common hci tasks (get or set one or two value)
+ * Common hci tasks
*
* In addition to the ACPI status, the HCI system returns a result which
* may be useful (such as "not supported").
*/
-static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
+static u32 hci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
{
u32 in[TCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
u32 out[TCI_WORDS];
@@ -345,7 +341,7 @@ static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
}
-static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
+static u32 hci_read(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
{
u32 in[TCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 };
u32 out[TCI_WORDS];
@@ -359,31 +355,6 @@ static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
return out[0];
}
-static u32 hci_write2(struct toshiba_acpi_dev *dev, u32 reg, u32 in1, u32 in2)
-{
- u32 in[TCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
- u32 out[TCI_WORDS];
- acpi_status status = tci_raw(dev, in, out);
-
- return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
-}
-
-static u32 hci_read2(struct toshiba_acpi_dev *dev,
- u32 reg, u32 *out1, u32 *out2)
-{
- u32 in[TCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
- u32 out[TCI_WORDS];
- acpi_status status = tci_raw(dev, in, out);
-
- if (ACPI_FAILURE(status))
- return TOS_FAILURE;
-
- *out1 = out[2];
- *out2 = out[3];
-
- return out[0];
-}
-
/*
* Common sci tasks
*/
@@ -395,7 +366,7 @@ static int sci_open(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to open SCI failed\n");
return 0;
}
@@ -433,7 +404,7 @@ static void sci_close(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to close SCI failed\n");
return;
}
@@ -481,7 +452,7 @@ static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to query Illumination support failed\n");
return 0;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -522,7 +493,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
struct toshiba_acpi_dev, led_dev);
u32 state, result;
- /* First request : initialize communication. */
+ /* First request : initialize communication. */
if (!sci_open(dev))
return LED_OFF;
@@ -625,7 +596,7 @@ static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev)
u32 state, result;
/* Check the keyboard backlight state */
- result = hci_read1(dev, HCI_KBD_ILLUMINATION, &state);
+ result = hci_read(dev, HCI_KBD_ILLUMINATION, &state);
if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to get the keyboard backlight failed\n");
return LED_OFF;
@@ -646,7 +617,7 @@ static void toshiba_kbd_backlight_set(struct led_classdev *cdev,
/* Set the keyboard backlight state */
state = brightness ? 1 : 0;
- result = hci_write1(dev, HCI_KBD_ILLUMINATION, state);
+ result = hci_write(dev, HCI_KBD_ILLUMINATION, state);
if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to set KBD Illumination mode failed\n");
return;
@@ -703,7 +674,7 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
u32 out[TCI_WORDS];
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get ECO led failed\n");
} else if (out[0] == TOS_NOT_INSTALLED) {
pr_info("ECO led not installed");
@@ -825,7 +796,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
return;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -839,7 +810,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -919,7 +890,7 @@ static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -948,7 +919,7 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -974,7 +945,7 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED ||
@@ -1002,7 +973,7 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -1194,121 +1165,31 @@ static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state)
static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev,
u32 *type)
{
- u32 val1 = 0x03;
- u32 val2 = 0;
- u32 result;
+ u32 in[TCI_WORDS] = { HCI_GET, HCI_SYSTEM_INFO, 0x03, 0, 0, 0 };
+ u32 out[TCI_WORDS];
+ acpi_status status;
- result = hci_read2(dev, HCI_SYSTEM_INFO, &val1, &val2);
- if (result == TOS_FAILURE) {
+ status = tci_raw(dev, in, out);
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get System type failed\n");
return -EIO;
- } else if (result == TOS_NOT_SUPPORTED) {
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
pr_info("System type not supported\n");
return -ENODEV;
}
- *type = val2;
+ *type = out[3];
return 0;
}
-/* Bluetooth rfkill handlers */
-
-static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0;
- hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
- if (hci_result == TOS_SUCCESS)
- *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
-
- return hci_result;
-}
-
-static u32 hci_get_radio_state(struct toshiba_acpi_dev *dev, bool *radio_state)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0x0001;
- hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
-
- *radio_state = value & HCI_WIRELESS_KILL_SWITCH;
- return hci_result;
-}
-
-static int bt_rfkill_set_block(void *data, bool blocked)
-{
- struct toshiba_acpi_dev *dev = data;
- u32 result1, result2;
- u32 value;
- int err;
- bool radio_state;
-
- value = (blocked == false);
-
- mutex_lock(&dev->mutex);
- if (hci_get_radio_state(dev, &radio_state) != TOS_SUCCESS) {
- err = -EIO;
- goto out;
- }
-
- if (!radio_state) {
- err = 0;
- goto out;
- }
-
- result1 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER);
- result2 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH);
-
- if (result1 != TOS_SUCCESS || result2 != TOS_SUCCESS)
- err = -EIO;
- else
- err = 0;
- out:
- mutex_unlock(&dev->mutex);
- return err;
-}
-
-static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
-{
- bool new_rfk_state;
- bool value;
- u32 hci_result;
- struct toshiba_acpi_dev *dev = data;
-
- mutex_lock(&dev->mutex);
-
- hci_result = hci_get_radio_state(dev, &value);
- if (hci_result != TOS_SUCCESS) {
- /* Can't do anything useful */
- mutex_unlock(&dev->mutex);
- return;
- }
-
- new_rfk_state = value;
-
- mutex_unlock(&dev->mutex);
-
- if (rfkill_set_hw_state(rfkill, !new_rfk_state))
- bt_rfkill_set_block(data, true);
-}
-
-static const struct rfkill_ops toshiba_rfk_ops = {
- .set_block = bt_rfkill_set_block,
- .poll = bt_rfkill_poll,
-};
-
+/* Transflective Backlight */
static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, bool *enabled)
{
u32 hci_result;
u32 status;
- hci_result = hci_read1(dev, HCI_TR_BACKLIGHT, &status);
+ hci_result = hci_read(dev, HCI_TR_BACKLIGHT, &status);
*enabled = !status;
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1318,12 +1199,13 @@ static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, bool enable)
u32 hci_result;
u32 value = !enable;
- hci_result = hci_write1(dev, HCI_TR_BACKLIGHT, value);
+ hci_result = hci_write(dev, HCI_TR_BACKLIGHT, value);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
-static struct proc_dir_entry *toshiba_proc_dir /*= 0*/;
+static struct proc_dir_entry *toshiba_proc_dir;
+/* LCD Brightness */
static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
{
u32 hci_result;
@@ -1341,7 +1223,7 @@ static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
brightness++;
}
- hci_result = hci_read1(dev, HCI_LCD_BRIGHTNESS, &value);
+ hci_result = hci_read(dev, HCI_LCD_BRIGHTNESS, &value);
if (hci_result == TOS_SUCCESS)
return brightness + (value >> HCI_LCD_BRIGHTNESS_SHIFT);
@@ -1396,7 +1278,7 @@ static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
}
value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_result = hci_write1(dev, HCI_LCD_BRIGHTNESS, value);
+ hci_result = hci_write(dev, HCI_LCD_BRIGHTNESS, value);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1446,7 +1328,7 @@ static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
- hci_result = hci_read1(dev, HCI_VIDEO_OUT, status);
+ hci_result = hci_read(dev, HCI_VIDEO_OUT, status);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1531,7 +1413,8 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
_set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
/*
* To avoid unnecessary video disruption, only write the new
- * video setting if something changed. */
+ * video setting if something changed.
+ */
if (new_video_out != video_out)
ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
}
@@ -1552,7 +1435,7 @@ static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
- hci_result = hci_read1(dev, HCI_FAN, status);
+ hci_result = hci_read(dev, HCI_FAN, status);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1592,7 +1475,7 @@ static ssize_t fan_proc_write(struct file *file, const char __user *buf,
if (sscanf(cmd, " force_on : %i", &value) == 1 &&
value >= 0 && value <= 1) {
- hci_result = hci_write1(dev, HCI_FAN, value);
+ hci_result = hci_write(dev, HCI_FAN, value);
if (hci_result == TOS_SUCCESS)
dev->force_fan = value;
else
@@ -1620,7 +1503,7 @@ static int keys_proc_show(struct seq_file *m, void *v)
u32 value;
if (!dev->key_event_valid && dev->system_event_supported) {
- hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
+ hci_result = hci_read(dev, HCI_SYSTEM_EVENT, &value);
if (hci_result == TOS_SUCCESS) {
dev->key_event_valid = 1;
dev->last_key_event = value;
@@ -1632,7 +1515,7 @@ static int keys_proc_show(struct seq_file *m, void *v)
* some machines where system events sporadically
* become disabled.
*/
- hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
} else {
pr_err("Error reading hotkey status\n");
@@ -1769,7 +1652,7 @@ static ssize_t fan_store(struct device *dev,
if (state != 0 && state != 1)
return -EINVAL;
- result = hci_write1(toshiba, HCI_FAN, state);
+ result = hci_write(toshiba, HCI_FAN, state);
if (result == TOS_FAILURE)
return -EIO;
else if (result == TOS_NOT_SUPPORTED)
@@ -2391,7 +2274,7 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
if (ACPI_FAILURE(status))
return -ENODEV;
- result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+ result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
if (result == TOS_FAILURE)
return -EIO;
else if (result == TOS_NOT_SUPPORTED)
@@ -2408,8 +2291,8 @@ static void toshiba_acpi_enable_special_functions(struct toshiba_acpi_dev *dev)
* Re-activate the hotkeys, but this time, we are using the
* "Special Functions" mode.
*/
- result = hci_write1(dev, HCI_HOTKEY_EVENT,
- HCI_HOTKEY_SPECIAL_FUNCTIONS);
+ result = hci_write(dev, HCI_HOTKEY_EVENT,
+ HCI_HOTKEY_SPECIAL_FUNCTIONS);
if (result != TOS_SUCCESS)
pr_err("Could not enable the Special Function mode\n");
}
@@ -2490,7 +2373,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
toshiba_acpi_report_hotkey(dev, scancode);
} else if (dev->system_event_supported) {
do {
- hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
+ hci_result = hci_read(dev, HCI_SYSTEM_EVENT, &value);
switch (hci_result) {
case TOS_SUCCESS:
toshiba_acpi_report_hotkey(dev, (int)value);
@@ -2502,7 +2385,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
* sporadically become disabled.
*/
hci_result =
- hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_write(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
/* Fall through */
default:
@@ -2579,7 +2462,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
if (acpi_has_method(dev->acpi_dev->handle, "INFO"))
dev->info_supported = 1;
else {
- hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
if (hci_result == TOS_SUCCESS)
dev->system_event_supported = 1;
}
@@ -2689,11 +2572,6 @@ static int toshiba_acpi_remove(struct acpi_device *acpi_dev)
sparse_keymap_free(dev->hotkey_dev);
}
- if (dev->bt_rfk) {
- rfkill_unregister(dev->bt_rfk);
- rfkill_destroy(dev->bt_rfk);
- }
-
backlight_device_unregister(dev->backlight_dev);
if (dev->illumination_supported)
@@ -2730,7 +2608,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
const char *hci_method;
u32 special_functions;
u32 dummy;
- bool bt_present;
int ret = 0;
if (toshiba_acpi)
@@ -2766,33 +2643,10 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
if (toshiba_acpi_setup_keyboard(dev))
pr_info("Unable to activate hotkeys\n");
- mutex_init(&dev->mutex);
-
ret = toshiba_acpi_setup_backlight(dev);
if (ret)
goto error;
- /* Register rfkill switch for Bluetooth */
- if (hci_get_bt_present(dev, &bt_present) == TOS_SUCCESS && bt_present) {
- dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
- &acpi_dev->dev,
- RFKILL_TYPE_BLUETOOTH,
- &toshiba_rfk_ops,
- dev);
- if (!dev->bt_rfk) {
- pr_err("unable to allocate rfkill device\n");
- ret = -ENOMEM;
- goto error;
- }
-
- ret = rfkill_register(dev->bt_rfk);
- if (ret) {
- pr_err("unable to register rfkill device\n");
- rfkill_destroy(dev->bt_rfk);
- goto error;
- }
- }
-
if (toshiba_illumination_available(dev)) {
dev->led_dev.name = "toshiba::illumination";
dev->led_dev.max_brightness = 1;
@@ -2930,7 +2784,7 @@ static int toshiba_acpi_suspend(struct device *device)
u32 result;
if (dev->hotkey_dev)
- result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
+ result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
return 0;
}
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 249800763362..c5e45089ac51 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -10,12 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Note the Toshiba Bluetooth RFKill switch seems to be a strange
- * fish. It only provides a BT event when the switch is flipped to
- * the 'on' position. When flipping it to 'off', the USB device is
- * simply pulled away underneath us, without any BT event being
- * delivered.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -25,6 +19,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/acpi.h>
+#include <linux/rfkill.h>
#define BT_KILLSWITCH_MASK 0x01
#define BT_PLUGGED_MASK 0x40
@@ -34,6 +29,15 @@ MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
MODULE_DESCRIPTION("Toshiba Laptop ACPI Bluetooth Enable Driver");
MODULE_LICENSE("GPL");
+struct toshiba_bluetooth_dev {
+ struct acpi_device *acpi_dev;
+ struct rfkill *rfk;
+
+ bool killswitch;
+ bool plugged;
+ bool powered;
+};
+
static int toshiba_bt_rfkill_add(struct acpi_device *device);
static int toshiba_bt_rfkill_remove(struct acpi_device *device);
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event);
@@ -95,41 +99,12 @@ static int toshiba_bluetooth_status(acpi_handle handle)
return -ENXIO;
}
- pr_info("Bluetooth status %llu\n", status);
-
return status;
}
static int toshiba_bluetooth_enable(acpi_handle handle)
{
acpi_status result;
- bool killswitch;
- bool powered;
- bool plugged;
- int status;
-
- /*
- * Query ACPI to verify RFKill switch is set to 'on'.
- * If not, we return silently, no need to report it as
- * an error.
- */
- status = toshiba_bluetooth_status(handle);
- if (status < 0)
- return status;
-
- killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
- powered = (status & BT_POWER_MASK) ? true : false;
- plugged = (status & BT_PLUGGED_MASK) ? true : false;
-
- if (!killswitch)
- return 0;
- /*
- * This check ensures to only enable the device if it is powered
- * off or detached, as some recent devices somehow pass the killswitch
- * test, causing a loop enabling/disabling the device, see bug 93911.
- */
- if (powered || plugged)
- return 0;
result = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
if (ACPI_FAILURE(result)) {
@@ -165,20 +140,102 @@ static int toshiba_bluetooth_disable(acpi_handle handle)
return 0;
}
+/* Helper function */
+static int toshiba_bluetooth_sync_status(struct toshiba_bluetooth_dev *bt_dev)
+{
+ int status;
+
+ status = toshiba_bluetooth_status(bt_dev->acpi_dev->handle);
+ if (status < 0) {
+ pr_err("Could not sync bluetooth device status\n");
+ return status;
+ }
+
+ bt_dev->killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
+ bt_dev->plugged = (status & BT_PLUGGED_MASK) ? true : false;
+ bt_dev->powered = (status & BT_POWER_MASK) ? true : false;
+
+ pr_debug("Bluetooth status %d killswitch %d plugged %d powered %d\n",
+ status, bt_dev->killswitch, bt_dev->plugged, bt_dev->powered);
+
+ return 0;
+}
+
+/* RFKill handlers */
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+ struct toshiba_bluetooth_dev *bt_dev = data;
+ int ret;
+
+ ret = toshiba_bluetooth_sync_status(bt_dev);
+ if (ret)
+ return ret;
+
+ if (!bt_dev->killswitch)
+ return 0;
+
+ if (blocked)
+ ret = toshiba_bluetooth_disable(bt_dev->acpi_dev->handle);
+ else
+ ret = toshiba_bluetooth_enable(bt_dev->acpi_dev->handle);
+
+ return ret;
+}
+
+static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+ struct toshiba_bluetooth_dev *bt_dev = data;
+
+ if (toshiba_bluetooth_sync_status(bt_dev))
+ return;
+
+ /*
+ * Note the Toshiba Bluetooth RFKill switch seems to be a strange
+ * fish. It only provides a BT event when the switch is flipped to
+ * the 'on' position. When flipping it to 'off', the USB device is
+ * simply pulled away underneath us, without any BT event being
+ * delivered.
+ */
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+}
+
+static const struct rfkill_ops rfk_ops = {
+ .set_block = bt_rfkill_set_block,
+ .poll = bt_rfkill_poll,
+};
+
+/* ACPI driver functions */
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event)
{
- toshiba_bluetooth_enable(device->handle);
+ struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
+ if (toshiba_bluetooth_sync_status(bt_dev))
+ return;
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
}
#ifdef CONFIG_PM_SLEEP
static int toshiba_bt_resume(struct device *dev)
{
- return toshiba_bluetooth_enable(to_acpi_device(dev)->handle);
+ struct toshiba_bluetooth_dev *bt_dev;
+ int ret;
+
+ bt_dev = acpi_driver_data(to_acpi_device(dev));
+
+ ret = toshiba_bluetooth_sync_status(bt_dev);
+ if (ret)
+ return ret;
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+ return 0;
}
#endif
static int toshiba_bt_rfkill_add(struct acpi_device *device)
{
+ struct toshiba_bluetooth_dev *bt_dev;
int result;
result = toshiba_bluetooth_present(device->handle);
@@ -187,17 +244,54 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
pr_info("Toshiba ACPI Bluetooth device driver\n");
- /* Enable the BT device */
- result = toshiba_bluetooth_enable(device->handle);
- if (result)
+ bt_dev = kzalloc(sizeof(*bt_dev), GFP_KERNEL);
+ if (!bt_dev)
+ return -ENOMEM;
+ bt_dev->acpi_dev = device;
+ device->driver_data = bt_dev;
+ dev_set_drvdata(&device->dev, bt_dev);
+
+ result = toshiba_bluetooth_sync_status(bt_dev);
+ if (result) {
+ kfree(bt_dev);
return result;
+ }
+
+ bt_dev->rfk = rfkill_alloc("Toshiba Bluetooth",
+ &device->dev,
+ RFKILL_TYPE_BLUETOOTH,
+ &rfk_ops,
+ bt_dev);
+ if (!bt_dev->rfk) {
+ pr_err("Unable to allocate rfkill device\n");
+ kfree(bt_dev);
+ return -ENOMEM;
+ }
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+ result = rfkill_register(bt_dev->rfk);
+ if (result) {
+ pr_err("Unable to register rfkill device\n");
+ rfkill_destroy(bt_dev->rfk);
+ kfree(bt_dev);
+ }
return result;
}
static int toshiba_bt_rfkill_remove(struct acpi_device *device)
{
+ struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
/* clean up */
+ if (bt_dev->rfk) {
+ rfkill_unregister(bt_dev->rfk);
+ rfkill_destroy(bt_dev->rfk);
+ }
+
+ kfree(bt_dev);
+
return toshiba_bluetooth_disable(device->handle);
}
diff --git a/drivers/platform/x86/toshiba_haps.c b/drivers/platform/x86/toshiba_haps.c
index 65300b6a84b9..7f2afc6b5eb9 100644
--- a/drivers/platform/x86/toshiba_haps.c
+++ b/drivers/platform/x86/toshiba_haps.c
@@ -78,15 +78,20 @@ static ssize_t protection_level_store(struct device *dev,
const char *buf, size_t count)
{
struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
- int level, ret;
-
- if (sscanf(buf, "%d", &level) != 1 || level < 0 || level > 3)
- return -EINVAL;
+ int level;
+ int ret;
- /* Set the sensor level.
- * Acceptable levels are:
+ ret = kstrtoint(buf, 0, &level);
+ if (ret)
+ return ret;
+ /*
+ * Check for supported levels, which can be:
* 0 - Disabled | 1 - Low | 2 - Medium | 3 - High
*/
+ if (level < 0 || level > 3)
+ return -EINVAL;
+
+ /* Set the sensor level */
ret = toshiba_haps_protection_level(haps->acpi_dev->handle, level);
if (ret != 0)
return ret;
@@ -95,15 +100,21 @@ static ssize_t protection_level_store(struct device *dev,
return count;
}
+static DEVICE_ATTR_RW(protection_level);
static ssize_t reset_protection_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
- int reset, ret;
+ int reset;
+ int ret;
- if (sscanf(buf, "%d", &reset) != 1 || reset != 1)
+ ret = kstrtoint(buf, 0, &reset);
+ if (ret)
+ return ret;
+ /* The only accepted value is 1 */
+ if (reset != 1)
return -EINVAL;
/* Reset the protection interface */
@@ -113,10 +124,7 @@ static ssize_t reset_protection_store(struct device *dev,
return count;
}
-
-static DEVICE_ATTR(protection_level, S_IRUGO | S_IWUSR,
- protection_level_show, protection_level_store);
-static DEVICE_ATTR(reset_protection, S_IWUSR, NULL, reset_protection_store);
+static DEVICE_ATTR_WO(reset_protection);
static struct attribute *haps_attributes[] = {
&dev_attr_protection_level.attr,
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-05 03:36:59 +0000