diff options
| -rw-r--r-- | MAINTAINERS | 11 | ||||
| -rw-r--r-- | drivers/net/wireless/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/net/wireless/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/ath5k.h | 1173 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/base.c | 2817 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/base.h | 178 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/debug.c | 469 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/debug.h | 216 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/hw.c | 4349 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/hw.h | 588 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/initvals.c | 1347 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/phy.c | 2071 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/reg.h | 1987 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/regdom.c | 121 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/regdom.h | 500 |
16 files changed, 15848 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a19469318ded..ba05e8058689 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -646,6 +646,17 @@ M: ecashin@coraid.com W: http://www.coraid.com/support/linux S: Supported +ATHEROS ATH5K WIRELESS DRIVER +P: Jiri Slaby +M: jirislaby@gmail.com +P: Nick Kossifidis +M: mickflemm@gmail.com +P: Luis R. Rodriguez +M: mcgrof@gmail.com +L: linux-wireless@vger.kernel.org +L: ath5k-devel@lists.ath5k.org +S: Maintained + ATL1 ETHERNET DRIVER P: Jay Cliburn M: jcliburn@gmail.com diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 2c08c0a5a0df..50a8b6c2fa00 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -648,6 +648,23 @@ config P54_PCI If you choose to build a module, it'll be called p54pci. +config ATH5K + tristate "Atheros 5xxx wireless cards support" + depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + ---help--- + This module adds support for wireless adapters based on + Atheros 5xxx chipset. + + Currently the following chip versions are supported: + + MAC: AR5211 AR5212 + PHY: RF5111/2111 RF5112/2112 RF5413/2413 + + This driver uses the kernel's mac80211 subsystem. + + If you choose to build a module, it'll be called ath5k. Say M if + unsure. + source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index d48f7d19745b..7e1535ece17a 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -59,3 +59,5 @@ obj-$(CONFIG_RT2X00) += rt2x00/ obj-$(CONFIG_P54_COMMON) += p54common.o obj-$(CONFIG_P54_USB) += p54usb.o obj-$(CONFIG_P54_PCI) += p54pci.o + +obj-$(CONFIG_ATH5K) += ath5k/ diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile new file mode 100644 index 000000000000..321641f99e13 --- /dev/null +++ b/drivers/net/wireless/ath5k/Makefile @@ -0,0 +1,2 @@ +ath5k-objs = base.o hw.o regdom.o initvals.o phy.o debug.o +obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h new file mode 100644 index 000000000000..878609f1bf39 --- /dev/null +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -0,0 +1,1173 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ATH5K_H +#define _ATH5K_H + +/* Set this to 1 to disable regulatory domain restrictions for channel tests. + * WARNING: This is for debuging only and has side effects (eg. scan takes too + * long and results timeouts). It's also illegal to tune to some of the + * supported frequencies in some countries, so use this at your own risk, + * you've been warned. */ +#define CHAN_DEBUG 0 + +#include <linux/io.h> +#include <linux/types.h> +#include <net/mac80211.h> + +#include "hw.h" +#include "regdom.h" + +/* PCI IDs */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ + +/****************************\ + GENERIC DRIVER DEFINITIONS +\****************************/ + +#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) + +#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ + printk(_level "ath5k %s: " _fmt, \ + ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ + ##__VA_ARGS__) + +#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ + if (net_ratelimit()) \ + ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ + } while (0) + +#define ATH5K_INFO(_sc, _fmt, ...) \ + ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) + +#define ATH5K_WARN(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) + +#define ATH5K_ERR(_sc, _fmt, ...) \ + ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) + +/* + * Some tuneable values (these should be changeable by the user) + */ +#define AR5K_TUNE_DMA_BEACON_RESP 2 +#define AR5K_TUNE_SW_BEACON_RESP 10 +#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 +#define AR5K_TUNE_RADAR_ALERT false +#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) +#define AR5K_TUNE_REGISTER_TIMEOUT 20000 +/* Register for RSSI threshold has a mask of 0xff, so 255 seems to + * be the max value. */ +#define AR5K_TUNE_RSSI_THRES 129 +/* This must be set when setting the RSSI threshold otherwise it can + * prevent a reset. If AR5K_RSSI_THR is read after writing to it + * the BMISS_THRES will be seen as 0, seems harware doesn't keep + * track of it. Max value depends on harware. For AR5210 this is just 7. + * For AR5211+ this seems to be up to 255. */ +#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 +#define AR5K_TUNE_BEACON_INTERVAL 100 +#define AR5K_TUNE_AIFS 2 +#define AR5K_TUNE_AIFS_11B 2 +#define AR5K_TUNE_AIFS_XR 0 +#define AR5K_TUNE_CWMIN 15 +#define AR5K_TUNE_CWMIN_11B 31 +#define AR5K_TUNE_CWMIN_XR 3 +#define AR5K_TUNE_CWMAX 1023 +#define AR5K_TUNE_CWMAX_11B 1023 +#define AR5K_TUNE_CWMAX_XR 7 +#define AR5K_TUNE_NOISE_FLOOR -72 +#define AR5K_TUNE_MAX_TXPOWER 60 +#define AR5K_TUNE_DEFAULT_TXPOWER 30 +#define AR5K_TUNE_TPC_TXPOWER true +#define AR5K_TUNE_ANT_DIVERSITY true +#define AR5K_TUNE_HWTXTRIES 4 + +/* token to use for aifs, cwmin, cwmax in MadWiFi */ +#define AR5K_TXQ_USEDEFAULT ((u32) -1) + +/* GENERIC CHIPSET DEFINITIONS */ + +/* MAC Chips */ +enum ath5k_version { + AR5K_AR5210 = 0, + AR5K_AR5211 = 1, + AR5K_AR5212 = 2, +}; + +/* PHY Chips */ +enum ath5k_radio { + AR5K_RF5110 = 0, + AR5K_RF5111 = 1, + AR5K_RF5112 = 2, + AR5K_RF5413 = 3, +}; + +/* + * Common silicon revision/version values + */ + +enum ath5k_srev_type { + AR5K_VERSION_VER, + AR5K_VERSION_RAD, +}; + +struct ath5k_srev_name { + const char *sr_name; + enum ath5k_srev_type sr_type; + u_int sr_val; +}; + +#define AR5K_SREV_UNKNOWN 0xffff + +#define AR5K_SREV_VER_AR5210 0x00 +#define AR5K_SREV_VER_AR5311 0x10 +#define AR5K_SREV_VER_AR5311A 0x20 +#define AR5K_SREV_VER_AR5311B 0x30 +#define AR5K_SREV_VER_AR5211 0x40 +#define AR5K_SREV_VER_AR5212 0x50 +#define AR5K_SREV_VER_AR5213 0x55 +#define AR5K_SREV_VER_AR5213A 0x59 +#define AR5K_SREV_VER_AR2424 0xa0 +#define AR5K_SREV_VER_AR5424 0xa3 +#define AR5K_SREV_VER_AR5413 0xa4 +#define AR5K_SREV_VER_AR5414 0xa5 +#define AR5K_SREV_VER_AR5416 0xc0 /* ? */ +#define AR5K_SREV_VER_AR5418 0xca + +#define AR5K_SREV_RAD_5110 0x00 +#define AR5K_SREV_RAD_5111 0x10 +#define AR5K_SREV_RAD_5111A 0x15 +#define AR5K_SREV_RAD_2111 0x20 +#define AR5K_SREV_RAD_5112 0x30 +#define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_2112 0x40 +#define AR5K_SREV_RAD_2112A 0x45 +#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */ +#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424/5424 */ +#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ + +/* IEEE defs */ + +#define IEEE80211_MAX_LEN 2500 + +/* TODO add support to mac80211 for vendor-specific rates and modes */ + +/* + * Some of this information is based on Documentation from: + * + * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * + * Modulation for Atheros' eXtended Range - range enhancing extension that is + * supposed to double the distance an Atheros client device can keep a + * connection with an Atheros access point. This is achieved by increasing + * the receiver sensitivity up to, -105dBm, which is about 20dB above what + * the 802.11 specifications demand. In addition, new (proprietary) data rates + * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * + * Please note that can you either use XR or TURBO but you cannot use both, + * they are exclusive. + * + */ +#define MODULATION_XR 0x00000200 +/* + * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a + * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s + * signaling rate achieved through the bonding of two 54Mbit/s 802.11g + * channels. To use this feature your Access Point must also suport it. + * There is also a distinction between "static" and "dynamic" turbo modes: + * + * - Static: is the dumb version: devices set to this mode stick to it until + * the mode is turned off. + * - Dynamic: is the intelligent version, the network decides itself if it + * is ok to use turbo. As soon as traffic is detected on adjacent channels + * (which would get used in turbo mode), or when a non-turbo station joins + * the network, turbo mode won't be used until the situation changes again. + * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which + * monitors the used radio band in order to decide whether turbo mode may + * be used or not. + * + * This article claims Super G sticks to bonding of channels 5 and 6 for + * USA: + * + * http://www.pcworld.com/article/id,113428-page,1/article.html + * + * The channel bonding seems to be driver specific though. In addition to + * deciding what channels will be used, these "Turbo" modes are accomplished + * by also enabling the following features: + * + * - Bursting: allows multiple frames to be sent at once, rather than pausing + * after each frame. Bursting is a standards-compliant feature that can be + * used with any Access Point. + * - Fast frames: increases the amount of information that can be sent per + * frame, also resulting in a reduction of transmission overhead. It is a + * proprietary feature that needs to be supported by the Access Point. + * - Compression: data frames are compressed in real time using a Lempel Ziv + * algorithm. This is done transparently. Once this feature is enabled, + * compression and decompression takes place inside the chipset, without + * putting additional load on the host CPU. + * + */ +#define MODULATION_TURBO 0x00000080 + +enum ath5k_vendor_mode { + MODE_ATHEROS_TURBO = NUM_IEEE80211_MODES+1, + MODE_ATHEROS_TURBOG +}; + +/* Number of supported mac80211 enum ieee80211_phymode modes by this driver */ +#define NUM_DRIVER_MODES 3 + +/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 + +#define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_CCK_2) +#define SHPREAMBLE_FLAG(_ix) (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) + +/****************\ + TX DEFINITIONS +\****************/ + +/* + * Tx Descriptor + */ +struct ath5k_tx_status { + u16 ts_seqnum; + u16 ts_tstamp; + u8 ts_status; + u8 ts_rate; + s8 ts_rssi; + u8 ts_shortretry; + u8 ts_longretry; + u8 ts_virtcol; + u8 ts_antenna; +}; + +#define AR5K_TXSTAT_ALTRATE 0x80 +#define AR5K_TXERR_XRETRY 0x01 +#define AR5K_TXERR_FILT 0x02 +#define AR5K_TXERR_FIFO 0x04 + +/** + * enum ath5k_tx_queue - Queue types used to classify tx queues. + * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue + * @AR5K_TX_QUEUE_DATA: A normal data queue + * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue + * @AR5K_TX_QUEUE_BEACON: The beacon queue + * @AR5K_TX_QUEUE_CAB: The after-beacon queue + * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue + */ +enum ath5k_tx_queue { + AR5K_TX_QUEUE_INACTIVE = 0, + AR5K_TX_QUEUE_DATA, + AR5K_TX_QUEUE_XR_DATA, + AR5K_TX_QUEUE_BEACON, + AR5K_TX_QUEUE_CAB, + AR5K_TX_QUEUE_UAPSD, +}; + +#define AR5K_NUM_TX_QUEUES 10 +#define AR5K_NUM_TX_QUEUES_NOQCU 2 + +/* + * Queue syb-types to classify normal data queues. + * These are the 4 Access Categories as defined in + * WME spec. 0 is the lowest priority and 4 is the + * highest. Normal data that hasn't been classified + * goes to the Best Effort AC. + */ +enum ath5k_tx_queue_subtype { + AR5K_WME_AC_BK = 0, /*Background traffic*/ + AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ + AR5K_WME_AC_VI, /*Video traffic*/ + AR5K_WME_AC_VO, /*Voice traffic*/ +}; + +/* + * Queue ID numbers as returned by the hw functions, each number + * represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. These match + * d80211 definitions (net80211/MadWiFi don't use them). + */ +enum ath5k_tx_queue_id { + AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, + AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ + AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ + AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ + AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ + AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ + AR5K_TX_QUEUE_ID_UAPSD = 8, + AR5K_TX_QUEUE_ID_XR_DATA = 9, +}; + + +/* + * Flags to set hw queue's parameters... + */ +#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ +#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ +#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/ + +/* + * A struct to hold tx queue's parameters + */ +struct ath5k_txq_info { + enum ath5k_tx_queue tqi_type; + enum ath5k_tx_queue_subtype tqi_subtype; + u16 tqi_flags; /* Tx queue flags (see above) */ + u32 tqi_aifs; /* Arbitrated Interframe Space */ + s32 tqi_cw_min; /* Minimum Contention Window */ + s32 tqi_cw_max; /* Maximum Contention Window */ + u32 tqi_cbr_period; /* Constant bit rate period */ + u32 tqi_cbr_overflow_limit; + u32 tqi_burst_time; + u32 tqi_ready_time; /* Not used */ +}; + +/* + * Transmit packet types. + * These are not fully used inside OpenHAL yet + */ +enum ath5k_pkt_type { + AR5K_PKT_TYPE_NORMAL = 0, + AR5K_PKT_TYPE_ATIM = 1, + AR5K_PKT_TYPE_PSPOLL = 2, + AR5K_PKT_TYPE_BEACON = 3, + AR5K_PKT_TYPE_PROBE_RESP = 4, + AR5K_PKT_TYPE_PIFS = 5, +}; + +/* + * TX power and TPC settings + */ +#define AR5K_TXPOWER_OFDM(_r, _v) ( \ + ((0 & 1) << ((_v) + 6)) | \ + (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \ +) + +#define AR5K_TXPOWER_CCK(_r, _v) ( \ + (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \ +) + +/* + * DMA size definitions (2^n+2) + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + +/****************\ + RX DEFINITIONS +\****************/ + +/* + * Rx Descriptor + */ +struct ath5k_rx_status { + u16 rs_datalen; + u16 rs_tstamp; + u8 rs_status; + u8 rs_phyerr; + s8 rs_rssi; + u8 rs_keyix; + u8 rs_rate; + u8 rs_antenna; + u8 rs_more; +}; + +#define AR5K_RXERR_CRC 0x01 +#define AR5K_RXERR_PHY 0x02 +#define AR5K_RXERR_FIFO 0x04 +#define AR5K_RXERR_DECRYPT 0x08 +#define AR5K_RXERR_MIC 0x10 +#define AR5K_RXKEYIX_INVALID ((u8) - 1) +#define AR5K_TXKEYIX_INVALID ((u32) - 1) + +struct ath5k_mib_stats { + u32 ackrcv_bad; + u32 rts_bad; + u32 rts_good; + u32 fcs_bad; + u32 beacons; +}; + + + + +/**************************\ + BEACON TIMERS DEFINITIONS +\**************************/ + +#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ +#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ + +#if 0 +/** + * struct ath5k_beacon_state - Per-station beacon timer state. + * @bs_interval: in TU's, can also include the above flags + * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a + * Point Coordination Function capable AP + */ +struct ath5k_beacon_state { + u32 bs_next_beacon; + u32 bs_next_dtim; + u32 bs_interval; + u8 bs_dtim_period; + u8 bs_cfp_period; + u16 bs_cfp_max_duration; + u16 bs_cfp_du_remain; + u16 bs_tim_offset; + u16 bs_sleep_duration; + u16 bs_bmiss_threshold; + u32 bs_cfp_next; +}; +#endif + + +/* + * TSF to TU conversion: + * + * TSF is a 64bit value in usec (microseconds). + * TU is a 32bit value in roughly msec (milliseconds): usec / 1024 + * (1000ms equals 976 TU) + */ +#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + + + +/********************\ + COMMON DEFINITIONS +\********************/ + +/* + * Atheros descriptor + */ +struct ath5k_desc { + u32 ds_link; + u32 ds_data; + u32 ds_ctl0; + u32 ds_ctl1; + u32 ds_hw[4]; + + union { + struct ath5k_rx_status rx; + struct ath5k_tx_status tx; + } ds_us; + +#define ds_rxstat ds_us.rx +#define ds_txstat ds_us.tx + +} __packed; + +#define AR5K_RXDESC_INTREQ 0x0020 + +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ + +#define AR5K_SLOT_TIME_9 396 +#define AR5K_SLOT_TIME_20 880 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* channel_flags */ +#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ +#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ +#define CHANNEL_CCK 0x0020 /* CCK channel */ +#define CHANNEL_OFDM 0x0040 /* OFDM channel */ +#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ +#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ +#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ +#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ +#define CHANNEL_XR 0x0800 /* XR channel */ + +#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) +#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) +#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) +#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_108A CHANNEL_T +#define CHANNEL_108G CHANNEL_TG +#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) + +#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ + CHANNEL_TURBO) + +#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) +#define CHANNEL_MODES CHANNEL_ALL + +/* + * Used internaly in OpenHAL (ar5211.c/ar5212.c + * for reset_tx_queue). Also see struct struct ieee80211_channel. + */ +#define IS_CHAN_XR(_c) ((_c.val & CHANNEL_XR) != 0) +#define IS_CHAN_B(_c) ((_c.val & CHANNEL_B) != 0) + +/* + * The following structure will be used to map 2GHz channels to + * 5GHz Atheros channels. + */ +struct ath5k_athchan_2ghz { + u32 a2_flags; + u16 a2_athchan; +}; + +/* + * Rate definitions + * TODO: Clean them up or move them on mac80211 -most of these infos are + * used by the rate control algorytm on MadWiFi. + */ + +/* Max number of rates on the rate table and what it seems + * Atheros hardware supports */ +#define AR5K_MAX_RATES 32 + +/** + * struct ath5k_rate - rate structure + * @valid: is this a valid rate for the current mode + * @modulation: respective mac80211 modulation + * @rate_kbps: rate in kbit/s + * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on + * &struct ath5k_rx_status.rs_rate and on TX on + * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports + * up to 32 rates, indexed by 1-32. This means we really only need + * 6 bits for the rate_code. + * @dot11_rate: respective IEEE-802.11 rate value + * @control_rate: index of rate assumed to be used to send control frames. + * This can be used to set override the value on the rate duration + * registers. This is only useful if we can override in the harware at + * what rate we want to send control frames at. Note that IEEE-802.11 + * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we + * should send ACK/CTS, if we change this value we can be breaking + * the spec. + * + * This structure is used to get the RX rate or set the TX rate on the + * hardware descriptors. It is also used for internal modulation control + * and settings. + * + * On RX after the &struct ath5k_desc is parsed by the appropriate + * ah_proc_rx_desc() the respective hardware rate value is set in + * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in + * &struct ath5k_tx_status.ts_rate which is later used to setup the + * &struct ath5k_desc correctly. This is the hardware rate map we are + * aware of: + * + * rate_code 1 2 3 4 5 6 7 8 + * rate_kbps 3000 1000 ? ? ? 2000 500 48000 + * + * rate_code 9 10 11 12 13 14 15 16 + * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? + * + * rate_code 17 18 19 20 21 22 23 24 + * rate_kbps ? ? ? ? ? ? ? 11000 + * + * rate_code 25 26 27 28 29 30 31 32 + * rate_kbps 5500 2000 1000 ? ? ? ? ? + * + */ +struct ath5k_rate { + u8 valid; + u32 modulation; + u16 rate_kbps; + u8 rate_code; + u8 dot11_rate; + u8 control_rate; +}; + +/* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ +struct ath5k_rate_table { + u16 rate_count; + u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ + struct ath5k_rate rates[AR5K_MAX_RATES]; +}; + +/* + * Rate tables... + */ +#define AR5K_RATES_11A { 8, { \ + 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ + 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ + 255, 255, 255, 255, 255, 255, 255, 255 }, { \ + { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 0 }, \ + { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 0 }, \ + { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 2 }, \ + { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 2 }, \ + { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 4 } } \ +} + +#define AR5K_RATES_11B { 4, { \ + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ + 3, 2, 1, 0, 255, 255, 255, 255 }, { \ + { 1, IEEE80211_RATE_CCK, 1000, 27, 130, 0 }, \ + { 1, IEEE80211_RATE_CCK_2, 2000, 26, 132, 1 }, \ + { 1, IEEE80211_RATE_CCK_2, 5500, 25, 139, 1 }, \ + { 1, IEEE80211_RATE_CCK_2, 11000, 24, 150, 1 } } \ +} + +#define AR5K_RATES_11G { 12, { \ + 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ + 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ + 3, 2, 1, 0, 255, 255, 255, 255 }, { \ + { 1, IEEE80211_RATE_CCK, 1000, 27, 2, 0 }, \ + { 1, IEEE80211_RATE_CCK_2, 2000, 26, 4, 1 }, \ + { 1, IEEE80211_RATE_CCK_2, 5500, 25, 11, 1 }, \ + { 1, IEEE80211_RATE_CCK_2, 11000, 24, 22, 1 }, \ + { 0, IEEE80211_RATE_OFDM, 6000, 11, 12, 4 }, \ + { 0, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 12000, 10, 24, 6 }, \ + { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \ + { 1, IEEE80211_RATE_OFDM, 24000, 9, 48, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \ +} + +#define AR5K_RATES_TURBO { 8, { \ + 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ + 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ + 255, 255, 255, 255, 255, 255, 255, 255 }, { \ + { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ + { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ + { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ + { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ + { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ + { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ + { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ + { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ +} + +#define AR5K_RATES_XR { 12, { \ + 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ + 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ + 255, 255, 255, 255, 255, 255, 255, 255 }, { \ + { 1, MODULATION_XR, 500, 7, 129, 0 }, \ + { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ + { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ + { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ + { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \ + { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 6 }, \ + { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \ + { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \ + { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \ +} + +/* + * Crypto definitions + */ + +#define AR5K_KEYCACHE_SIZE 8 + +/***********************\ + HW RELATED DEFINITIONS +\***********************/ + +/* + * Misc definitions + */ +#define AR5K_RSSI_EP_MULTIPLIER (1<<7) + +#define AR5K_ASSERT_ENTRY(_e, _s) do { \ + if (_e >= _s) \ + return (false); \ +} while (0) + + +enum ath5k_ant_setting { + AR5K_ANT_VARIABLE = 0, /* variable by programming */ + AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ + AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ + AR5K_ANT_MAX = 3, +}; + +/* + * Hardware interrupt abstraction + */ + +/** + * enum ath5k_int - Hardware interrupt masks helpers + * + * @AR5K_INT_RX: mask to identify received frame interrupts, of type + * AR5K_ISR_RXOK or AR5K_ISR_RXERR + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) + * @AR5K_INT_RXNOFRM: No frame received (?) + * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's + * LinkPtr is NULL. For more details, refer to: + * http://www.freepatentsonline.com/20030225739.html + * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). + * Note that Rx overrun is not always fatal, on some chips we can continue + * operation without reseting the card, that's why int_fatal is not + * common for all chips. + * @AR5K_INT_TX: mask to identify received frame interrupts, of type + * AR5K_ISR_TXOK or AR5K_ISR_TXERR + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) + * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold + * We currently do increments on interrupt by + * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 + * @AR5K_INT_MIB: Indicates the Management Information Base counters should be + * checked. We should do this with ath5k_hw_update_mib_counters() but + * it seems we should also then do some noise immunity work. + * @AR5K_INT_RXPHY: RX PHY Error + * @AR5K_INT_RXKCM: ?? + * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a + * beacon that must be handled in software. The alternative is if you + * have VEOL support, in that case you let the hardware deal with things. + * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing + * beacons from the AP have associated with, we should probably try to + * reassociate. When in IBSS mode this might mean we have not received + * any beacons from any local stations. Note that every station in an + * IBSS schedules to send beacons at the Target Beacon Transmission Time + * (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now + * until properly handled + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA + * errors. These types of errors we can enable seem to be of type + * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER + * @AR5K_INT_NOCARD: signals the card has been removed + * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same + * bit value + * + * These are mapped to take advantage of some common bits + * between the MACs, to be able to set intr properties + * easier. Some of them are not used yet inside hw.c. Most map + * to the respective hw interrupt value as they are common amogst different + * MACs. + */ +enum ath5k_int { + AR5K_INT_RX = 0x00000001, /* Not common */ + AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXNOFRM = 0x00000008, + AR5K_INT_RXEOL = 0x00000010, + AR5K_INT_RXORN = 0x00000020, + AR5K_INT_TX = 0x00000040, /* Not common */ + AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXURN = 0x00000800, + AR5K_INT_MIB = 0x00001000, + AR5K_INT_RXPHY = 0x00004000, + AR5K_INT_RXKCM = 0x00008000, + AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BMISS = 0x00040000, + AR5K_INT_BNR = 0x00100000, /* Not common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_FATAL = 0x40000000, /* Not common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_COMMON = AR5K_INT_RXNOFRM + | AR5K_INT_RXDESC + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXURN + | AR5K_INT_TXDESC + | AR5K_INT_MIB + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BMISS + | AR5K_INT_GPIO, + AR5K_INT_NOCARD = 0xffffffff +}; + +/* + * Power management + */ +enum ath5k_power_mode { + AR5K_PM_UNDEFINED = 0, + AR5K_PM_AUTO, + AR5K_PM_AWAKE, + AR5K_PM_FULL_SLEEP, + AR5K_PM_NETWORK_SLEEP, +}; + +/* + * These match net80211 definitions (not used in + * d80211). + */ +#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ +#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ +#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ +#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ +#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ + +/* GPIO-controlled software LED */ +#define AR5K_SOFTLED_PIN 0 +#define AR5K_SOFTLED_ON 0 +#define AR5K_SOFTLED_OFF 1 + +/* + * Chipset capabilities -see ath5k_hw_get_capability- + * get_capability function is not yet fully implemented + * in OpenHAL so most of these don't work yet... + */ +enum ath5k_capability_type { + AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ + AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ + AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ + AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ + AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ + AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ + AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ + AR5K_CAP_COMPRESSION = 8, /* Supports compression */ + AR5K_CAP_BURST = 9, /* Supports packet bursting */ + AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ + AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ + AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ + AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ + AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ + AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ + AR5K_CAP_XR = 16, /* Supports XR mode */ + AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ + AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ + AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ + AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ +}; + +struct ath5k_capabilities { + /* + * Supported PHY modes + * (ie. CHANNEL_A, CHANNEL_B, ...) + */ + DECLARE_BITMAP(cap_mode, NUM_DRIVER_MODES); + + /* + * Frequency range (without regulation restrictions) + */ + struct { + u16 range_2ghz_min; + u16 range_2ghz_max; + u16 range_5ghz_min; + u16 range_5ghz_max; + } cap_range; + + /* + * Active regulation domain settings + */ + struct { + enum ath5k_regdom reg_current; + enum ath5k_regdom reg_hw; + } cap_regdomain; + + /* + * Values stored in the EEPROM (some of them...) + */ + struct ath5k_eeprom_info cap_eeprom; + + /* + * Queue information + */ + struct { + u8 q_tx_num; + } cap_queues; +}; + + +/***************************************\ + HARDWARE ABSTRACTION LAYER STRUCTURE +\***************************************/ + +/* + * Misc defines + */ + +#define AR5K_MAX_GPIO 10 +#define AR5K_MAX_RF_BANKS 8 + +struct ath5k_hw { + u32 ah_magic; + + struct ath5k_softc *ah_sc; + void __iomem *ah_iobase; + + enum ath5k_int ah_imr; + + enum ieee80211_if_types ah_op_mode; + enum ath5k_power_mode ah_power_mode; + struct ieee80211_channel ah_current_channel; + bool ah_turbo; + bool ah_calibration; + bool ah_running; + bool ah_single_chip; + enum ath5k_rfgain ah_rf_gain; + + u32 ah_mac_srev; + u16 ah_mac_version; + u16 ah_mac_revision; + u16 ah_phy_revision; + u16 ah_radio_5ghz_revision; + u16 ah_radio_2ghz_revision; + + enum ath5k_version ah_version; + enum ath5k_radio ah_radio; + u32 ah_phy; + + bool ah_5ghz; + bool ah_2ghz; + +#define ah_regdomain ah_capabilities.cap_regdomain.reg_current +#define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw +#define ah_modes ah_capabilities.cap_mode +#define ah_ee_version ah_capabilities.cap_eeprom.ee_version + + u32 ah_atim_window; + u32 ah_aifs; + u32 ah_cw_min; + u32 ah_cw_max; + bool ah_software_retry; + u32 ah_limit_tx_retries; + + u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + bool ah_ant_diversity; + + u8 ah_sta_id[ETH_ALEN]; + + /* Current BSSID we are trying to assoc to / creating. + * This is passed by mac80211 on config_interface() and cached here for + * use in resets */ + u8 ah_bssid[ETH_ALEN]; + + u32 ah_gpio[AR5K_MAX_GPIO]; + int ah_gpio_npins; + + struct ath5k_capabilities ah_capabilities; + + struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; + u32 ah_txq_status; + u32 ah_txq_imr_txok; + u32 ah_txq_imr_txerr; + u32 ah_txq_imr_txurn; + u32 ah_txq_imr_txdesc; + u32 ah_txq_imr_txeol; + u32 *ah_rf_banks; + size_t ah_rf_banks_size; + struct ath5k_gain ah_gain; + u32 ah_offset[AR5K_MAX_RF_BANKS]; + + struct { + u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; + u16 txp_rates[AR5K_MAX_RATES]; + s16 txp_min; + s16 txp_max; + bool txp_tpc; + s16 txp_ofdm; + } ah_txpower; + + struct { + bool r_enabled; + int r_last_alert; + struct ieee80211_channel r_last_channel; + } ah_radar; + + /* noise floor from last periodic calibration */ + s32 ah_noise_floor; + + /* + * Function pointers + */ + int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int); + bool (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int); + int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *); + int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *); +}; + +/* + * Prototypes + */ + +/* General Functions */ +extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); +/* Attach/Detach Functions */ +extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); +extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); +extern void ath5k_hw_detach(struct ath5k_hw *ah); +/* Reset Functions */ +extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); +/* Power management functions */ +extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); +/* DMA Related Functions */ +extern void ath5k_hw_start_rx(struct ath5k_hw *ah); +extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); +extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); +extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); +extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); +/* Interrupt handling */ +extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); +extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); +extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); +/* EEPROM access functions */ +extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); +/* Protocol Control Unit Functions */ +extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); +/* BSSID Functions */ +extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); +extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); +extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); +extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); +/* Receive start/stop functions */ +extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); +/* RX Filter functions */ +extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); +extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); +extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); +extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); +extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* Beacon related functions */ +extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); +extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); +extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); +extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); +#if 0 +extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); +extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); +extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); +#endif +extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ath5k_mib_stats *statistics); +/* ACK bit rate */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); +/* ACK/CTS Timeouts */ +extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); +extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); +/* Key table (WEP) functions */ +extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); +extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); +extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); +extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); +/* Queue Control Unit, DFS Control Unit Functions */ +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); +extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); +extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); +/* Hardware Descriptor Functions */ +extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); +/* GPIO Functions */ +extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); +extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); +/* Regulatory Domain/Channels Setup */ +extern u16 ath5k_get_regdomain(struct ath5k_hw *ah); +/* Misc functions */ +extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); + + +/* Initial register settings functions */ +extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); +/* Initialize RF */ +extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); +extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); +extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); +extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); + + +/* PHY/RF channel functions */ +extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); +extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); +/* PHY calibration */ +extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* Misc PHY functions */ +extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); +extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); +extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +/* TX power setup */ +extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); + + +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return ioread32(ah->ah_iobase + reg); +} + +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + iowrite32(val, ah->ah_iobase + reg); +} + +#endif diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c new file mode 100644 index 000000000000..d3d37282f3dc --- /dev/null +++ b/drivers/net/wireless/ath5k/base.c @@ -0,0 +1,2817 @@ +/*- + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/if.h> +#include <linux/netdevice.h> +#include <linux/cache.h> +#include <linux/pci.h> +#include <linux/ethtool.h> +#include <linux/uaccess.h> + +#include <net/ieee80211_radiotap.h> + +#include <asm/unaligned.h> + +#include "base.h" +#include "reg.h" +#include "debug.h" + +/* unaligned little endian access */ +#define LE_READ_2(_p) (le16_to_cpu(get_unaligned((__le16 *)(_p)))) +#define LE_READ_4(_p) (le32_to_cpu(get_unaligned((__le32 *)(_p)))) + +enum { + ATH_LED_TX, + ATH_LED_RX, +}; + +static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ + + +/******************\ +* Internal defines * +\******************/ + +/* Module info */ +MODULE_AUTHOR("Jiri Slaby"); +MODULE_AUTHOR("Nick Kossifidis"); +MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards."); +MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION("0.1.1 (EXPERIMENTAL)"); + + +/* Known PCI ids */ +static struct pci_device_id ath5k_pci_id_table[] __devinitdata = { + { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */ + { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */ + { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/ + { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */ + { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */ + { PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */ + { PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */ + { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */ + { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */ + { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */ + { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/ + { PCI_VDEVICE(ATHEROS, 0x0023), .driver_data = AR5K_AR5212 }, /* 5416 */ + { PCI_VDEVICE(ATHEROS, 0x0024), .driver_data = AR5K_AR5212 }, /* 5418 */ + { 0 } +}; +MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); + +/* Known SREVs */ +static struct ath5k_srev_name srev_names[] = { + { "5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210 }, + { "5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311 }, + { "5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A }, + { "5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B }, + { "5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211 }, + { "5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212 }, + { "5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213 }, + { "5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A }, + { "2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424 }, + { "5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424 }, + { "5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413 }, + { "5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414 }, + { "5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416 }, + { "5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418 }, + { "xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN }, + { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, + { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, + { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, + { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, + { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, + { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, + { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, + { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1 }, + { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2 }, + { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, + { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, +}; + +/* + * Prototypes - PCI stack related functions + */ +static int __devinit ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id); +static void __devexit ath5k_pci_remove(struct pci_dev *pdev); +#ifdef CONFIG_PM +static int ath5k_pci_suspend(struct pci_dev *pdev, + pm_message_t state); +static int ath5k_pci_resume(struct pci_dev *pdev); +#else +#define ath5k_pci_suspend NULL +#define ath5k_pci_resume NULL +#endif /* CONFIG_PM */ + +static struct pci_driver ath5k_pci_drv_id = { + .name = "ath5k_pci", + .id_table = ath5k_pci_id_table, + .probe = ath5k_pci_probe, + .remove = __devexit_p(ath5k_pci_remove), + .suspend = ath5k_pci_suspend, + .resume = ath5k_pci_resume, +}; + + + +/* + * Prototypes - MAC 802.11 stack related functions + */ +static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *ctl); +static int ath5k_reset(struct ieee80211_hw *hw); +static int ath5k_start(struct ieee80211_hw *hw); +static void ath5k_stop(struct ieee80211_hw *hw); +static int ath5k_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); +static void ath5k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf); +static int ath5k_config(struct ieee80211_hw *hw, + struct ieee80211_conf *conf); +static int ath5k_config_interface(struct ieee80211_hw *hw, int if_id, + struct ieee80211_if_conf *conf); +static void ath5k_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + int mc_count, struct dev_mc_list *mclist); +static int ath5k_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + const u8 *local_addr, const u8 *addr, + struct ieee80211_key_conf *key); +static int ath5k_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats); +static int ath5k_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats); +static u64 ath5k_get_tsf(struct ieee80211_hw *hw); +static void ath5k_reset_tsf(struct ieee80211_hw *hw); +static int ath5k_beacon_update(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_control *ctl); + +static struct ieee80211_ops ath5k_hw_ops = { + .tx = ath5k_tx, + .start = ath5k_start, + .stop = ath5k_stop, + .add_interface = ath5k_add_interface, + .remove_interface = ath5k_remove_interface, + .config = ath5k_config, + .config_interface = ath5k_config_interface, + .configure_filter = ath5k_configure_filter, + .set_key = ath5k_set_key, + .get_stats = ath5k_get_stats, + .conf_tx = NULL, + .get_tx_stats = ath5k_get_tx_stats, + .get_tsf = ath5k_get_tsf, + .reset_tsf = ath5k_reset_tsf, + .beacon_update = ath5k_beacon_update, +}; + +/* + * Prototypes - Internal functions + */ +/* Attach detach */ +static int ath5k_attach(struct pci_dev *pdev, + struct ieee80211_hw *hw); +static void ath5k_detach(struct pci_dev *pdev, + struct ieee80211_hw *hw); +/* Channel/mode setup */ +static inline short ath5k_ieee2mhz(short chan); +static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates, + const struct ath5k_rate_table *rt, + unsigned int max); +static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, + struct ieee80211_channel *channels, + unsigned int mode, + unsigned int max); +static int ath5k_getchannels(struct ieee80211_hw *hw); +static int ath5k_chan_set(struct ath5k_softc *sc, + struct ieee80211_channel *chan); +static void ath5k_setcurmode(struct ath5k_softc *sc, + unsigned int mode); +static void ath5k_mode_setup(struct ath5k_softc *sc); +/* Descriptor setup */ +static int ath5k_desc_alloc(struct ath5k_softc *sc, + struct pci_dev *pdev); +static void ath5k_desc_free(struct ath5k_softc *sc, + struct pci_dev *pdev); +/* Buffers setup */ +static int ath5k_rxbuf_setup(struct ath5k_softc *sc, + struct ath5k_buf *bf); +static int ath5k_txbuf_setup(struct ath5k_softc *sc, + struct ath5k_buf *bf, + struct ieee80211_tx_control *ctl); + +static inline void ath5k_txbuf_free(struct ath5k_softc *sc, + struct ath5k_buf *bf) +{ + BUG_ON(!bf); + if (!bf->skb) + return; + pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len, + PCI_DMA_TODEVICE); + dev_kfree_skb(bf->skb); + bf->skb = NULL; +} + +/* Queues setup */ +static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc, + int qtype, int subtype); +static int ath5k_beaconq_setup(struct ath5k_hw *ah); +static int ath5k_beaconq_config(struct ath5k_softc *sc); +static void ath5k_txq_drainq(struct ath5k_softc *sc, + struct ath5k_txq *txq); +static void ath5k_txq_cleanup(struct ath5k_softc *sc); +static void ath5k_txq_release(struct ath5k_softc *sc); +/* Rx handling */ +static int ath5k_rx_start(struct ath5k_softc *sc); +static void ath5k_rx_stop(struct ath5k_softc *sc); +static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc, + struct ath5k_desc *ds, + struct sk_buff *skb); +static void ath5k_tasklet_rx(unsigned long data); +/* Tx handling */ +static void ath5k_tx_processq(struct ath5k_softc *sc, + struct ath5k_txq *txq); +static void ath5k_tasklet_tx(unsigned long data); +/* Beacon handling */ +static int ath5k_beacon_setup(struct ath5k_softc *sc, + struct ath5k_buf *bf, + struct ieee80211_tx_control *ctl); +static void ath5k_beacon_send(struct ath5k_softc *sc); +static void ath5k_beacon_config(struct ath5k_softc *sc); + +static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp) +{ + u64 tsf = ath5k_hw_get_tsf64(ah); + + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + + return (tsf & ~0x7fff) | rstamp; +} + +/* Interrupt handling */ +static int ath5k_init(struct ath5k_softc *sc); +static int ath5k_stop_locked(struct ath5k_softc *sc); +static int ath5k_stop_hw(struct ath5k_softc *sc); +static irqreturn_t ath5k_intr(int irq, void *dev_id); +static void ath5k_tasklet_reset(unsigned long data); + +static void ath5k_calibrate(unsigned long data); +/* LED functions */ +static void ath5k_led_off(unsigned long data); +static void ath5k_led_blink(struct ath5k_softc *sc, + unsigned int on, + unsigned int off); +static void ath5k_led_event(struct ath5k_softc *sc, + int event); + + +/* + * Module init/exit functions + */ +static int __init +init_ath5k_pci(void) +{ + int ret; + + ath5k_debug_init(); + + ret = pci_register_driver(&ath5k_pci_drv_id); + if (ret) { + printk(KERN_ERR "ath5k_pci: can't register pci driver\n"); + return ret; + } + + return 0; +} + +static void __exit +exit_ath5k_pci(void) +{ + pci_unregister_driver(&ath5k_pci_drv_id); + + ath5k_debug_finish(); +} + +module_init(init_ath5k_pci); +module_exit(exit_ath5k_pci); + + +/********************\ +* PCI Initialization * +\********************/ + +static const char * +ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val) +{ + const char *name = "xxxxx"; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(srev_names); i++) { + if (srev_names[i].sr_type != type) + continue; + if ((val & 0xff) < srev_names[i + 1].sr_val) { + name = srev_names[i].sr_name; + break; + } + } + + return name; +} + +static int __devinit +ath5k_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath5k_softc *sc; + struct ieee80211_hw *hw; + int ret; + u8 csz; + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device\n"); + goto err; + } + + /* XXX 32-bit addressing only */ + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret) { + dev_err(&pdev->dev, "32-bit DMA not available\n"); + goto err_dis; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES / sizeof(u32); + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* Enable bus mastering */ + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + ret = pci_request_region(pdev, 0, "ath5k"); + if (ret) { + dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); + goto err_dis; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + dev_err(&pdev->dev, "cannot remap PCI memory region\n") ; + ret = -EIO; + goto err_reg; + } + + /* + * Allocate hw (mac80211 main struct) + * and hw->priv (driver private data) + */ + hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops); + if (hw == NULL) { + dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); + ret = -ENOMEM; + goto err_map; + } + + dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); + + /* Initialize driver private data */ + SET_IEEE80211_DEV(hw, &pdev->dev); + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS; + hw->extra_tx_headroom = 2; + hw->channel_change_time = 5000; + /* these names are misleading */ + hw->max_rssi = -110; /* signal in dBm */ + hw->max_noise = -110; /* noise in dBm */ + hw->max_signal = 100; /* we will provide a percentage based on rssi */ + sc = hw->priv; + sc->hw = hw; + sc->pdev = pdev; + + ath5k_debug_init_device(sc); + + /* + * Mark the device as detached to avoid processing + * interrupts until setup is complete. + */ + __set_bit(ATH_STAT_INVALID, sc->status); + + sc->iobase = mem; /* So we can unmap it on detach */ + sc->cachelsz = csz * sizeof(u32); /* convert to bytes */ + sc->opmode = IEEE80211_IF_TYPE_STA; + mutex_init(&sc->lock); + spin_lock_init(&sc->rxbuflock); + spin_lock_init(&sc->txbuflock); + + /* Set private data */ + pci_set_drvdata(pdev, hw); + + /* Enable msi for devices that support it */ + pci_enable_msi(pdev); + + /* Setup interrupt handler */ + ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (ret) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_free; + } + + /* Initialize device */ + sc->ah = ath5k_hw_attach(sc, id->driver_data); + if (IS_ERR(sc->ah)) { + ret = PTR_ERR(sc->ah); + goto err_irq; + } + + /* Finish private driver data initialization */ + ret = ath5k_attach(pdev, hw); + if (ret) + goto err_ah; + + ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev), + sc->ah->ah_mac_srev, + sc->ah->ah_phy_revision); + + if(!sc->ah->ah_single_chip){ + /* Single chip radio (!RF5111) */ + if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){ + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */ + } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){ + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + ATH5K_INFO(sc, "RF%s multiband radio found" + " (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */ + else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){ + ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision), + sc->ah->ah_radio_2ghz_revision); + } + } + + + /* ready to process interrupts */ + __clear_bit(ATH_STAT_INVALID, sc->status); + + return 0; +err_ah: + ath5k_hw_detach(sc->ah); +err_irq: + free_irq(pdev->irq, sc); +err_free: + pci_disable_msi(pdev); + ieee80211_free_hw(hw); +err_map: + pci_iounmap(pdev, mem); +err_reg: + pci_release_region(pdev, 0); +err_dis: + pci_disable_device(pdev); +err: + return ret; +} + +static void __devexit +ath5k_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; + + ath5k_debug_finish_device(sc); + ath5k_detach(pdev, hw); + ath5k_hw_detach(sc->ah); + free_irq(pdev->irq, sc); + pci_disable_msi(pdev); + pci_iounmap(pdev, sc->iobase); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + ieee80211_free_hw(hw); +} + +#ifdef CONFIG_PM +static int +ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; + + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) + ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1); + + ath5k_stop_hw(sc); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int +ath5k_pci_resume(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; + int err; + + err = pci_set_power_state(pdev, PCI_D0); + if (err) + return err; + + err = pci_enable_device(pdev); + if (err) + return err; + + pci_restore_state(pdev); + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_write_config_byte(pdev, 0x41, 0); + + ath5k_init(sc); + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); + ath5k_hw_set_gpio(sc->ah, sc->led_pin, 0); + } + + return 0; +} +#endif /* CONFIG_PM */ + + + +/***********************\ +* Driver Initialization * +\***********************/ + +static int +ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u8 mac[ETH_ALEN]; + unsigned int i; + int ret; + + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); + + /* + * Check if the MAC has multi-rate retry support. + * We do this by trying to setup a fake extended + * descriptor. MAC's that don't have support will + * return false w/o doing anything. MAC's that do + * support it will return true w/o doing anything. + */ + if (ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0)) + __set_bit(ATH_STAT_MRRETRY, sc->status); + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reset_key(ah, i); + + /* + * Collect the channel list. The 802.11 layer + * is resposible for filtering this list based + * on settings like the phy mode and regulatory + * domain restrictions. + */ + ret = ath5k_getchannels(hw); + if (ret) { + ATH5K_ERR(sc, "can't get channels\n"); + goto err; + } + + /* NB: setup here so ath5k_rate_update is happy */ + if (test_bit(MODE_IEEE80211A, ah->ah_modes)) + ath5k_setcurmode(sc, MODE_IEEE80211A); + else + ath5k_setcurmode(sc, MODE_IEEE80211B); + + /* + * Allocate tx+rx descriptors and populate the lists. + */ + ret = ath5k_desc_alloc(sc, pdev); + if (ret) { + ATH5K_ERR(sc, "can't allocate descriptors\n"); + goto err; + } + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that hw functions handle reseting + * these queues at the needed time. + */ + ret = ath5k_beaconq_setup(ah); + if (ret < 0) { + ATH5K_ERR(sc, "can't setup a beacon xmit queue\n"); + goto err_desc; + } + sc->bhalq = ret; + + sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK); + if (IS_ERR(sc->txq)) { + ATH5K_ERR(sc, "can't setup xmit queue\n"); + ret = PTR_ERR(sc->txq); + goto err_bhal; + } + + tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc); + tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); + tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); + setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); + setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc); + + sc->led_on = 0; /* low true */ + /* + * Auto-enable soft led processing for IBM cards and for + * 5211 minipci cards. + */ + if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || + pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 0; + } + /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 0; + } + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + ath5k_hw_set_gpio_output(ah, sc->led_pin); + ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); + } + + ath5k_hw_get_lladdr(ah, mac); + SET_IEEE80211_PERM_ADDR(hw, mac); + /* All MAC address bits matter for ACKs */ + memset(sc->bssidmask, 0xff, ETH_ALEN); + ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); + + ret = ieee80211_register_hw(hw); + if (ret) { + ATH5K_ERR(sc, "can't register ieee80211 hw\n"); + goto err_queues; + } + + return 0; +err_queues: + ath5k_txq_release(sc); +err_bhal: + ath5k_hw_release_tx_queue(ah, sc->bhalq); +err_desc: + ath5k_desc_free(sc, pdev); +err: + return ret; +} + +static void +ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + + /* + * NB: the order of these is important: + * o call the 802.11 layer before detaching ath5k_hw to + * insure callbacks into the driver to delete global + * key cache entries can be handled + * o reclaim the tx queue data structures after calling + * the 802.11 layer as we'll get called back to reclaim + * node state and potentially want to use them + * o to cleanup the tx queues the hal is called, so detach + * it last + * XXX: ??? detach ath5k_hw ??? + * Other than that, it's straightforward... + */ + ieee80211_unregister_hw(hw); + ath5k_desc_free(sc, pdev); + ath5k_txq_release(sc); + ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + + /* + * NB: can't reclaim these until after ieee80211_ifdetach + * returns because we'll get called back to reclaim node + * state and potentially want to use them. + */ +} + + + + +/********************\ +* Channel/mode setup * +\********************/ + +/* + * Convert IEEE channel number to MHz frequency. + */ +static inline short +ath5k_ieee2mhz(short chan) +{ + if (chan <= 14 || chan >= 27) + return ieee80211chan2mhz(chan); + else + return 2212 + chan * 20; +} + +static unsigned int +ath5k_copy_rates(struct ieee80211_rate *rates, + const struct ath5k_rate_table *rt, + unsigned int max) +{ + unsigned int i, count; + + if (rt == NULL) + return 0; + + for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) { + if (!rt->rates[i].valid) + continue; + rates->rate = rt->rates[i].rate_kbps / 100; + rates->val = rt->rates[i].rate_code; + rates->flags = rt->rates[i].modulation; + rates++; + count++; + max--; + } + + return count; +} + +static unsigned int +ath5k_copy_channels(struct ath5k_hw *ah, + struct ieee80211_channel *channels, + unsigned int mode, + unsigned int max) +{ + static const struct { unsigned int mode, mask, chan; } map[] = { + [MODE_IEEE80211A] = { CHANNEL_OFDM, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_A }, + [MODE_ATHEROS_TURBO] = { CHANNEL_OFDM|CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_T }, + [MODE_IEEE80211B] = { CHANNEL_CCK, CHANNEL_CCK, CHANNEL_B }, + [MODE_IEEE80211G] = { CHANNEL_OFDM, CHANNEL_OFDM, CHANNEL_G }, + [MODE_ATHEROS_TURBOG] = { CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_TG }, + }; + static const struct ath5k_regchannel chans_2ghz[] = + IEEE80211_CHANNELS_2GHZ; + static const struct ath5k_regchannel chans_5ghz[] = + IEEE80211_CHANNELS_5GHZ; + const struct ath5k_regchannel *chans; + enum ath5k_regdom dmn; + unsigned int i, count, size, chfreq, all, f, ch; + + if (!test_bit(mode, ah->ah_modes)) + return 0; + + all = ah->ah_regdomain == DMN_DEFAULT || CHAN_DEBUG == 1; + + switch (mode) { + case MODE_IEEE80211A: + case MODE_ATHEROS_TURBO: + /* 1..220, but 2GHz frequencies are filtered by check_channel */ + size = all ? 220 : ARRAY_SIZE(chans_5ghz); + chans = chans_5ghz; + dmn = ath5k_regdom2flag(ah->ah_regdomain, + IEEE80211_CHANNELS_5GHZ_MIN); + chfreq = CHANNEL_5GHZ; + break; + case MODE_IEEE80211B: + case MODE_IEEE80211G: + case MODE_ATHEROS_TURBOG: + size = all ? 26 : ARRAY_SIZE(chans_2ghz); + chans = chans_2ghz; + dmn = ath5k_regdom2flag(ah->ah_regdomain, + IEEE80211_CHANNELS_2GHZ_MIN); + chfreq = CHANNEL_2GHZ; + break; + default: + ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n"); + return 0; + } + + for (i = 0, count = 0; i < size && max > 0; i++) { + ch = all ? i + 1 : chans[i].chan; + f = ath5k_ieee2mhz(ch); + /* Check if channel is supported by the chipset */ + if (!ath5k_channel_ok(ah, f, chfreq)) + continue; + + /* Match regulation domain */ + if (!all && !(IEEE80211_DMN(chans[i].domain) & + IEEE80211_DMN(dmn))) + continue; + + if (!all && (chans[i].mode & map[mode].mask) != map[mode].mode) + continue; + + /* Write channel and increment counter */ + channels->chan = ch; + channels->freq = f; + channels->val = map[mode].chan; + channels++; + count++; + max--; + } + + return count; +} + +/* Only tries to register modes our EEPROM says it can support */ +#define REGISTER_MODE(m) do { \ + ret = ath5k_register_mode(hw, m); \ + if (ret) \ + return ret; \ +} while (0) \ + +static inline int +ath5k_register_mode(struct ieee80211_hw *hw, u8 m) +{ + struct ath5k_softc *sc = hw->priv; + struct ieee80211_hw_mode *modes = sc->modes; + unsigned int i; + int ret; + + if (!test_bit(m, sc->ah->ah_capabilities.cap_mode)) + return 0; + + for (i = 0; i < NUM_DRIVER_MODES; i++) { + if (modes[i].mode != m || !modes[i].num_channels) + continue; + ret = ieee80211_register_hwmode(hw, &modes[i]); + if (ret) { + ATH5K_ERR(sc, "can't register hwmode %u\n", m); + return ret; + } + return 0; + } + BUG(); +} + +static int +ath5k_getchannels(struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + struct ieee80211_hw_mode *modes = sc->modes; + unsigned int i, max_r, max_c; + int ret; + + BUILD_BUG_ON(ARRAY_SIZE(sc->modes) < 3); + + /* The order here does not matter */ + modes[0].mode = MODE_IEEE80211G; + modes[1].mode = MODE_IEEE80211B; + modes[2].mode = MODE_IEEE80211A; + + max_r = ARRAY_SIZE(sc->rates); + max_c = ARRAY_SIZE(sc->channels); + + for (i = 0; i < NUM_DRIVER_MODES; i++) { + struct ieee80211_hw_mode *mode = &modes[i]; + const struct ath5k_rate_table *hw_rates; + + if (i == 0) { + modes[0].rates = sc->rates; + modes->channels = sc->channels; + } else { + struct ieee80211_hw_mode *prev_mode = &modes[i-1]; + int prev_num_r = prev_mode->num_rates; + int prev_num_c = prev_mode->num_channels; + mode->rates = &prev_mode->rates[prev_num_r]; + mode->channels = &prev_mode->channels[prev_num_c]; + } + + hw_rates = ath5k_hw_get_rate_table(ah, mode->mode); + mode->num_rates = ath5k_copy_rates(mode->rates, hw_rates, + max_r); + mode->num_channels = ath5k_copy_channels(ah, mode->channels, + mode->mode, max_c); + max_r -= mode->num_rates; + max_c -= mode->num_channels; + } + + /* We try to register all modes this driver supports. We don't bother + * with MODE_IEEE80211B for AR5212 as MODE_IEEE80211G already accounts + * for that as per mac80211. Then, REGISTER_MODE() will will actually + * check the eeprom reading for more reliable capability information. + * Order matters here as per mac80211's latest preference. This will + * all hopefullly soon go away. */ + + REGISTER_MODE(MODE_IEEE80211G); + if (ah->ah_version != AR5K_AR5212) + REGISTER_MODE(MODE_IEEE80211B); + REGISTER_MODE(MODE_IEEE80211A); + + ath5k_debug_dump_modes(sc, modes); + + return ret; +} + +/* + * Set/change channels. If the channel is really being changed, + * it's done by reseting the chip. To accomplish this we must + * first cleanup any pending DMA, then restart stuff after a la + * ath5k_init. + */ +static int +ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) +{ + struct ath5k_hw *ah = sc->ah; + int ret; + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "%u (%u MHz) -> %u (%u MHz)\n", + sc->curchan->chan, sc->curchan->freq, + chan->chan, chan->freq); + + if (chan->freq != sc->curchan->freq || chan->val != sc->curchan->val) { + /* + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath5k_hw_set_intr(ah, 0); /* disable interrupts */ + ath5k_txq_cleanup(sc); /* clear pending tx frames */ + ath5k_rx_stop(sc); /* turn off frame recv */ + ret = ath5k_hw_reset(ah, sc->opmode, chan, true); + if (ret) { + ATH5K_ERR(sc, "%s: unable to reset channel %u " + "(%u Mhz)\n", __func__, chan->chan, chan->freq); + return ret; + } + sc->curchan = chan; + ath5k_hw_set_txpower_limit(sc->ah, 0); + + /* + * Re-enable rx framework. + */ + ret = ath5k_rx_start(sc); + if (ret) { + ATH5K_ERR(sc, "%s: unable to restart recv logic\n", + __func__); + return ret; + } + + /* + * Change channels and update the h/w rate map + * if we're switching; e.g. 11a to 11b/g. + * + * XXX needed? + */ +/* ath5k_chan_change(sc, chan); */ + + ath5k_beacon_config(sc); + /* + * Re-enable interrupts. + */ + ath5k_hw_set_intr(ah, sc->imask); + } + + return 0; +} + +static void +ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) +{ + if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) { + /* from Atheros NDIS driver, w/ permission */ + static const struct { + u16 rate; /* tx/rx 802.11 rate */ + u16 timeOn; /* LED on time (ms) */ + u16 timeOff; /* LED off time (ms) */ + } blinkrates[] = { + { 108, 40, 10 }, + { 96, 44, 11 }, + { 72, 50, 13 }, + { 48, 57, 14 }, + { 36, 67, 16 }, + { 24, 80, 20 }, + { 22, 100, 25 }, + { 18, 133, 34 }, + { 12, 160, 40 }, + { 10, 200, 50 }, + { 6, 240, 58 }, + { 4, 267, 66 }, + { 2, 400, 100 }, + { 0, 500, 130 } + }; + const struct ath5k_rate_table *rt = + ath5k_hw_get_rate_table(sc->ah, mode); + unsigned int i, j; + + BUG_ON(rt == NULL); + + memset(sc->hwmap, 0, sizeof(sc->hwmap)); + for (i = 0; i < 32; i++) { + u8 ix = rt->rate_code_to_index[i]; + if (ix == 0xff) { + sc->hwmap[i].ledon = msecs_to_jiffies(500); + sc->hwmap[i].ledoff = msecs_to_jiffies(130); + continue; + } + sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; + if (SHPREAMBLE_FLAG(ix) || rt->rates[ix].modulation == + IEEE80211_RATE_OFDM) + sc->hwmap[i].txflags |= + IEEE80211_RADIOTAP_F_SHORTPRE; + /* receive frames include FCS */ + sc->hwmap[i].rxflags = sc->hwmap[i].txflags | + IEEE80211_RADIOTAP_F_FCS; + /* setup blink rate table to avoid per-packet lookup */ + for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++) + if (blinkrates[j].rate == /* XXX why 7f? */ + (rt->rates[ix].dot11_rate&0x7f)) + break; + + sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j]. + timeOn); + sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j]. + timeOff); + } + } + + sc->curmode = mode; +} + +static void +ath5k_mode_setup(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + + /* configure rx filter */ + rfilt = sc->filter_flags; + ath5k_hw_set_rx_filter(ah, rfilt); + + if (ath5k_hw_hasbssidmask(ah)) + ath5k_hw_set_bssid_mask(ah, sc->bssidmask); + + /* configure operational mode */ + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_mcast_filter(ah, 0, 0); + ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); +} + + + + +/***************\ +* Buffers setup * +\***************/ + +static int +ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) +{ + struct ath5k_hw *ah = sc->ah; + struct sk_buff *skb = bf->skb; + struct ath5k_desc *ds; + + if (likely(skb == NULL)) { + unsigned int off; + + /* + * Allocate buffer with headroom_needed space for the + * fake physical layer header at the start. + */ + skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1); + if (unlikely(skb == NULL)) { + ATH5K_ERR(sc, "can't alloc skbuff of size %u\n", + sc->rxbufsize + sc->cachelsz - 1); + return -ENOMEM; + } + /* + * Cache-line-align. This is important (for the + * 5210 at least) as not doing so causes bogus data + * in rx'd frames. + */ + off = ((unsigned long)skb->data) % sc->cachelsz; + if (off != 0) + skb_reserve(skb, sc->cachelsz - off); + + bf->skb = skb; + bf->skbaddr = pci_map_single(sc->pdev, + skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(bf->skbaddr))) { + ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__); + dev_kfree_skb(skb); + bf->skb = NULL; + return -ENOMEM; + } + } + + /* + * Setup descriptors. For receive we always terminate + * the descriptor list with a self-linked entry so we'll + * not get overrun under high load (as can happen with a + * 5212 when ANI processing enables PHY error frames). + * + * To insure the last descriptor is self-linked we create + * each descriptor as self-linked and add it to the end. As + * each additional descriptor is added the previous self-linked + * entry is ``fixed'' naturally. This should be safe even + * if DMA is happening. When processing RX interrupts we + * never remove/process the last, self-linked, entry on the + * descriptor list. This insures the hardware always has + * someplace to write a new frame. + */ + ds = bf->desc; + ds->ds_link = bf->daddr; /* link to self */ + ds->ds_data = bf->skbaddr; + ath5k_hw_setup_rx_desc(ah, ds, + skb_tailroom(skb), /* buffer size */ + 0); + + if (sc->rxlink != NULL) + *sc->rxlink = bf->daddr; + sc->rxlink = &ds->ds_link; + return 0; +} + +static int +ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, + struct ieee80211_tx_control *ctl) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq *txq = sc->txq; + struct ath5k_desc *ds = bf->desc; + struct sk_buff *skb = bf->skb; + unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID; + int ret; + + flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; + bf->ctl = *ctl; + /* XXX endianness */ + bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + + if (ctl->flags & IEEE80211_TXCTL_NO_ACK) + flags |= AR5K_TXDESC_NOACK; + + pktlen = skb->len + FCS_LEN; + + if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) { + keyidx = ctl->key_idx; + pktlen += ctl->icv_len; + } + + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, + ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, + (ctl->power_level * 2), ctl->tx_rate, ctl->retry_limit, keyidx, 0, flags, 0, 0); + if (ret) + goto err_unmap; + + ds->ds_link = 0; + ds->ds_data = bf->skbaddr; + + spin_lock_bh(&txq->lock); + list_add_tail(&bf->list, &txq->q); + sc->tx_stats.data[txq->qnum].len++; + if (txq->link == NULL) /* is this first packet? */ + ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr); + else /* no, so only link it */ + *txq->link = bf->daddr; + + txq->link = &ds->ds_link; + ath5k_hw_tx_start(ah, txq->qnum); + spin_unlock_bh(&txq->lock); + + return 0; +err_unmap: + pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); + return ret; +} + +/*******************\ +* Descriptors setup * +\*******************/ + +static int +ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev) +{ + struct ath5k_desc *ds; + struct ath5k_buf *bf; + dma_addr_t da; + unsigned int i; + int ret; + + /* allocate descriptors */ + sc->desc_len = sizeof(struct ath5k_desc) * + (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1); + sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr); + if (sc->desc == NULL) { + ATH5K_ERR(sc, "can't allocate descriptors\n"); + ret = -ENOMEM; + goto err; + } + ds = sc->desc; + da = sc->desc_daddr; + ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n", + ds, sc->desc_len, (unsigned long long)sc->desc_daddr); + + bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF, + sizeof(struct ath5k_buf), GFP_KERNEL); + if (bf == NULL) { + ATH5K_ERR(sc, "can't allocate bufptr\n"); + ret = -ENOMEM; + goto err_free; + } + sc->bufptr = bf; + + INIT_LIST_HEAD(&sc->rxbuf); + for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->rxbuf); + } + + INIT_LIST_HEAD(&sc->txbuf); + sc->txbuf_len = ATH_TXBUF; + for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, + da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->txbuf); + } + + /* beacon buffer */ + bf->desc = ds; + bf->daddr = da; + sc->bbuf = bf; + + return 0; +err_free: + pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); +err: + sc->desc = NULL; + return ret; +} + +static void +ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev) +{ + struct ath5k_buf *bf; + + ath5k_txbuf_free(sc, sc->bbuf); + list_for_each_entry(bf, &sc->txbuf, list) + ath5k_txbuf_free(sc, bf); + list_for_each_entry(bf, &sc->rxbuf, list) + ath5k_txbuf_free(sc, bf); + + /* Free memory associated with all descriptors */ + pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr); + + kfree(sc->bufptr); + sc->bufptr = NULL; +} + + + + + +/**************\ +* Queues setup * +\**************/ + +static struct ath5k_txq * +ath5k_txq_setup(struct ath5k_softc *sc, + int qtype, int subtype) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq *txq; + struct ath5k_txq_info qi = { + .tqi_subtype = subtype, + .tqi_aifs = AR5K_TXQ_USEDEFAULT, + .tqi_cw_min = AR5K_TXQ_USEDEFAULT, + .tqi_cw_max = AR5K_TXQ_USEDEFAULT + }; + int qnum; + + /* + * Enable interrupts only for EOL and DESC conditions. + * We mark tx descriptors to receive a DESC interrupt + * when a tx queue gets deep; otherwise waiting for the + * EOL to reap descriptors. Note that this is done to + * reduce interrupt load and this only defers reaping + * descriptors, never transmitting frames. Aside from + * reducing interrupts this also permits more concurrency. + * The only potential downside is if the tx queue backs + * up in which case the top half of the kernel may backup + * due to a lack of tx descriptors. + */ + qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE | + AR5K_TXQ_FLAG_TXDESCINT_ENABLE; + qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi); + if (qnum < 0) { + /* + * NB: don't print a message, this happens + * normally on parts with too few tx queues + */ + return ERR_PTR(qnum); + } + if (qnum >= ARRAY_SIZE(sc->txqs)) { + ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n", + qnum, ARRAY_SIZE(sc->txqs)); + ath5k_hw_release_tx_queue(ah, qnum); + return ERR_PTR(-EINVAL); + } + txq = &sc->txqs[qnum]; + if (!txq->setup) { + txq->qnum = qnum; + txq->link = NULL; + INIT_LIST_HEAD(&txq->q); + spin_lock_init(&txq->lock); + txq->setup = true; + } + return &sc->txqs[qnum]; +} + +static int +ath5k_beaconq_setup(struct ath5k_hw *ah) +{ + struct ath5k_txq_info qi = { + .tqi_aifs = AR5K_TXQ_USEDEFAULT, + .tqi_cw_min = AR5K_TXQ_USEDEFAULT, + .tqi_cw_max = AR5K_TXQ_USEDEFAULT, + /* NB: for dynamic turbo, don't enable any other interrupts */ + .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE + }; + + return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi); +} + +static int +ath5k_beaconq_config(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq_info qi; + int ret; + + ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi); + if (ret) + return ret; + if (sc->opmode == IEEE80211_IF_TYPE_AP || + sc->opmode == IEEE80211_IF_TYPE_IBSS) { + /* + * Always burst out beacon and CAB traffic + * (aifs = cwmin = cwmax = 0) + */ + qi.tqi_aifs = 0; + qi.tqi_cw_min = 0; + qi.tqi_cw_max = 0; + } + + ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi); + if (ret) { + ATH5K_ERR(sc, "%s: unable to update parameters for beacon " + "hardware queue!\n", __func__); + return ret; + } + + return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */; +} + +static void +ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) +{ + struct ath5k_buf *bf, *bf0; + + /* + * NB: this assumes output has been stopped and + * we do not need to block ath5k_tx_tasklet + */ + spin_lock_bh(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ath5k_debug_printtxbuf(sc, bf, !sc->ah->ah_proc_tx_desc(sc->ah, + bf->desc)); + + ath5k_txbuf_free(sc, bf); + + spin_lock_bh(&sc->txbuflock); + sc->tx_stats.data[txq->qnum].len--; + list_move_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + spin_unlock_bh(&sc->txbuflock); + } + txq->link = NULL; + spin_unlock_bh(&txq->lock); +} + +/* + * Drain the transmit queues and reclaim resources. + */ +static void +ath5k_txq_cleanup(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + unsigned int i; + + /* XXX return value */ + if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) { + /* don't touch the hardware if marked invalid */ + ath5k_hw_stop_tx_dma(ah, sc->bhalq); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", + ath5k_hw_get_tx_buf(ah, sc->bhalq)); + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) + if (sc->txqs[i].setup) { + ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " + "link %p\n", + sc->txqs[i].qnum, + ath5k_hw_get_tx_buf(ah, + sc->txqs[i].qnum), + sc->txqs[i].link); + } + } + ieee80211_start_queues(sc->hw); /* XXX move to callers */ + + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) + if (sc->txqs[i].setup) + ath5k_txq_drainq(sc, &sc->txqs[i]); +} + +static void +ath5k_txq_release(struct ath5k_softc *sc) +{ + struct ath5k_txq *txq = sc->txqs; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++) + if (txq->setup) { + ath5k_hw_release_tx_queue(sc->ah, txq->qnum); + txq->setup = false; + } +} + + + + +/*************\ +* RX Handling * +\*************/ + +/* + * Enable the receive h/w following a reset. + */ +static int +ath5k_rx_start(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_buf *bf; + int ret; + + sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz); + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n", + sc->cachelsz, sc->rxbufsize); + + sc->rxlink = NULL; + + spin_lock_bh(&sc->rxbuflock); + list_for_each_entry(bf, &sc->rxbuf, list) { + ret = ath5k_rxbuf_setup(sc, bf); + if (ret != 0) { + spin_unlock_bh(&sc->rxbuflock); + goto err; + } + } + bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); + spin_unlock_bh(&sc->rxbuflock); + + ath5k_hw_put_rx_buf(ah, bf->daddr); + ath5k_hw_start_rx(ah); /* enable recv descriptors */ + ath5k_mode_setup(sc); /* set filters, etc. */ + ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ + + return 0; +err: + return ret; +} + +/* + * Disable the receive h/w in preparation for a reset. + */ +static void +ath5k_rx_stop(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ + ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ + ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ + mdelay(3); /* 3ms is long enough for 1 frame */ + + ath5k_debug_printrxbuffs(sc, ah); + + sc->rxlink = NULL; /* just in case */ +} + +static unsigned int +ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds, + struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (void *)skb->data; + unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb); + + if (!(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) && + ds->ds_rxstat.rs_keyix != AR5K_RXKEYIX_INVALID) + return RX_FLAG_DECRYPTED; + + /* Apparently when a default key is used to decrypt the packet + the hw does not set the index used to decrypt. In such cases + get the index from the packet. */ + if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) && + !(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) && + skb->len >= hlen + 4) { + keyix = skb->data[hlen + 3] >> 6; + + if (test_bit(keyix, sc->keymap)) + return RX_FLAG_DECRYPTED; + } + + return 0; +} + +static void +ath5k_tasklet_rx(unsigned long data) +{ + struct ieee80211_rx_status rxs = {}; + struct sk_buff *skb; + struct ath5k_softc *sc = (void *)data; + struct ath5k_buf *bf; + struct ath5k_desc *ds; + u16 len; + u8 stat; + int ret; + int hdrlen; + int pad; + + spin_lock(&sc->rxbuflock); + do { + if (unlikely(list_empty(&sc->rxbuf))) { + ATH5K_WARN(sc, "empty rx buf pool\n"); + break; + } + bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); + BUG_ON(bf->skb == NULL); + skb = bf->skb; + ds = bf->desc; + + /* TODO only one segment */ + pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, + sc->desc_len, PCI_DMA_FROMDEVICE); + + if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */ + break; + + ret = sc->ah->ah_proc_rx_desc(sc->ah, ds); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(sc, "error in processing rx descriptor\n"); + return; + } + + if (unlikely(ds->ds_rxstat.rs_more)) { + ATH5K_WARN(sc, "unsupported jumbo\n"); + goto next; + } + + stat = ds->ds_rxstat.rs_status; + if (unlikely(stat)) { + if (stat & AR5K_RXERR_PHY) + goto next; + if (stat & AR5K_RXERR_DECRYPT) { + /* + * Decrypt error. If the error occurred + * because there was no hardware key, then + * let the frame through so the upper layers + * can process it. This is necessary for 5210 + * parts which have no way to setup a ``clear'' + * key cache entry. + * + * XXX do key cache faulting + */ + if (ds->ds_rxstat.rs_keyix == + AR5K_RXKEYIX_INVALID && + !(stat & AR5K_RXERR_CRC)) + goto accept; + } + if (stat & AR5K_RXERR_MIC) { + rxs.flag |= RX_FLAG_MMIC_ERROR; + goto accept; + } + + /* let crypto-error packets fall through in MNTR */ + if ((stat & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) || + sc->opmode != IEEE80211_IF_TYPE_MNTR) + goto next; + } +accept: + len = ds->ds_rxstat.rs_datalen; + pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, len, + PCI_DMA_FROMDEVICE); + pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, + PCI_DMA_FROMDEVICE); + bf->skb = NULL; + + skb_put(skb, len); + + /* + * the hardware adds a padding to 4 byte boundaries between + * the header and the payload data if the header length is + * not multiples of 4 - remove it + */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + pad = hdrlen % 4; + memmove(skb->data + pad, skb->data, hdrlen); + skb_pull(skb, pad); + } + + if (sc->opmode == IEEE80211_IF_TYPE_MNTR) + rxs.mactime = ath5k_extend_tsf(sc->ah, + ds->ds_rxstat.rs_tstamp); + else + rxs.mactime = ds->ds_rxstat.rs_tstamp; + rxs.freq = sc->curchan->freq; + rxs.channel = sc->curchan->chan; + rxs.phymode = sc->curmode; + + /* + * signal quality: + * the names here are misleading and the usage of these + * values by iwconfig makes it even worse + */ + /* noise floor in dBm, from the last noise calibration */ + rxs.noise = sc->ah->ah_noise_floor; + /* signal level in dBm */ + rxs.ssi = rxs.noise + ds->ds_rxstat.rs_rssi; + /* + * "signal" is actually displayed as Link Quality by iwconfig + * we provide a percentage based on rssi (assuming max rssi 64) + */ + rxs.signal = ds->ds_rxstat.rs_rssi * 100 / 64; + + rxs.antenna = ds->ds_rxstat.rs_antenna; + rxs.rate = ds->ds_rxstat.rs_rate; + rxs.flag |= ath5k_rx_decrypted(sc, ds, skb); + + ath5k_debug_dump_skb(sc, skb, "RX ", 0); + + __ieee80211_rx(sc->hw, skb, &rxs); + sc->led_rxrate = ds->ds_rxstat.rs_rate; + ath5k_led_event(sc, ATH_LED_RX); +next: + list_move_tail(&bf->list, &sc->rxbuf); + } while (ath5k_rxbuf_setup(sc, bf) == 0); + spin_unlock(&sc->rxbuflock); +} + + + + +/*************\ +* TX Handling * +\*************/ + +static void +ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) +{ + struct ieee80211_tx_status txs = {}; + struct ath5k_buf *bf, *bf0; + struct ath5k_desc *ds; + struct sk_buff *skb; + int ret; + + spin_lock(&txq->lock); + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ds = bf->desc; + + /* TODO only one segment */ + pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, + sc->desc_len, PCI_DMA_FROMDEVICE); + ret = sc->ah->ah_proc_tx_desc(sc->ah, ds); + if (unlikely(ret == -EINPROGRESS)) + break; + else if (unlikely(ret)) { + ATH5K_ERR(sc, "error %d while processing queue %u\n", + ret, txq->qnum); + break; + } + + skb = bf->skb; + bf->skb = NULL; + pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, + PCI_DMA_TODEVICE); + + txs.control = bf->ctl; + txs.retry_count = ds->ds_txstat.ts_shortretry + + ds->ds_txstat.ts_longretry / 6; + if (unlikely(ds->ds_txstat.ts_status)) { + sc->ll_stats.dot11ACKFailureCount++; + if (ds->ds_txstat.ts_status & AR5K_TXERR_XRETRY) + txs.excessive_retries = 1; + else if (ds->ds_txstat.ts_status & AR5K_TXERR_FILT) + txs.flags |= IEEE80211_TX_STATUS_TX_FILTERED; + } else { + txs.flags |= IEEE80211_TX_STATUS_ACK; + txs.ack_signal = ds->ds_txstat.ts_rssi; + } + + ieee80211_tx_status(sc->hw, skb, &txs); + sc->tx_stats.data[txq->qnum].count++; + + spin_lock(&sc->txbuflock); + sc->tx_stats.data[txq->qnum].len--; + list_move_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + spin_unlock(&sc->txbuflock); + } + if (likely(list_empty(&txq->q))) + txq->link = NULL; + spin_unlock(&txq->lock); + if (sc->txbuf_len > ATH_TXBUF / 5) + ieee80211_wake_queues(sc->hw); +} + +static void +ath5k_tasklet_tx(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + + ath5k_tx_processq(sc, sc->txq); + + ath5k_led_event(sc, ATH_LED_TX); +} + + + + +/*****************\ +* Beacon handling * +\*****************/ + +/* + * Setup the beacon frame for transmit. + */ +static int +ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, + struct ieee80211_tx_control *ctl) +{ + struct sk_buff *skb = bf->skb; + struct ath5k_hw *ah = sc->ah; + struct ath5k_desc *ds; + int ret, antenna = 0; + u32 flags; + + bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] " + "skbaddr %llx\n", skb, skb->data, skb->len, + (unsigned long long)bf->skbaddr); + if (pci_dma_mapping_error(bf->skbaddr)) { + ATH5K_ERR(sc, "beacon DMA mapping failed\n"); + return -EIO; + } + + ds = bf->desc; + + flags = AR5K_TXDESC_NOACK; + if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) { + ds->ds_link = bf->daddr; /* self-linked */ + flags |= AR5K_TXDESC_VEOL; + /* + * Let hardware handle antenna switching if txantenna is not set + */ + } else { + ds->ds_link = 0; + /* + * Switch antenna every 4 beacons if txantenna is not set + * XXX assumes two antennas + */ + if (antenna == 0) + antenna = sc->bsent & 4 ? 2 : 1; + } + + ds->ds_data = bf->skbaddr; + ret = ah->ah_setup_tx_desc(ah, ds, skb->len + FCS_LEN, + ieee80211_get_hdrlen_from_skb(skb), + AR5K_PKT_TYPE_BEACON, (ctl->power_level * 2), ctl->tx_rate, 1, + AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0); + if (ret) + goto err_unmap; + + return 0; +err_unmap: + pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); + return ret; +} + +/* + * Transmit a beacon frame at SWBA. Dynamic updates to the + * frame contents are done as needed and the slot time is + * also adjusted based on current state. + * + * this is usually called from interrupt context (ath5k_intr()) + * but also from ath5k_beacon_config() in IBSS mode which in turn + * can be called from a tasklet and user context + */ +static void +ath5k_beacon_send(struct ath5k_softc *sc) +{ + struct ath5k_buf *bf = sc->bbuf; + struct ath5k_hw *ah = sc->ah; + + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "in beacon_send\n"); + + if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA || + sc->opmode == IEEE80211_IF_TYPE_MNTR)) { + ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL); + return; + } + /* + * Check if the previous beacon has gone out. If + * not don't don't try to post another, skip this + * period and wait for the next. Missed beacons + * indicate a problem and should not occur. If we + * miss too many consecutive beacons reset the device. + */ + if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) { + sc->bmisscount++; + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, + "missed %u consecutive beacons\n", sc->bmisscount); + if (sc->bmisscount > 3) { /* NB: 3 is a guess */ + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, + "stuck beacon time (%u missed)\n", + sc->bmisscount); + tasklet_schedule(&sc->restq); + } + return; + } + if (unlikely(sc->bmisscount != 0)) { + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, + "resume beacon xmit after %u misses\n", + sc->bmisscount); + sc->bmisscount = 0; + } + + /* + * Stop any current dma and put the new frame on the queue. + * This should never fail since we check above that no frames + * are still pending on the queue. + */ + if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) { + ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); + /* NB: hw still stops DMA, so proceed */ + } + pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len, + PCI_DMA_TODEVICE); + + ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); + ath5k_hw_tx_start(ah, sc->bhalq); + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "TXDP[%u] = %llx (%p)\n", + sc->bhalq, (unsigned long long)bf->daddr, bf->desc); + + sc->bsent++; +} + + +static void +ath5k_beacon_update_timers(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + u32 uninitialized_var(nexttbtt), intval, tsftu; + u64 tsf; + + intval = sc->bintval & AR5K_BEACON_PERIOD; + if (WARN_ON(!intval)) + return; + + /* current TSF converted to TU */ + tsf = ath5k_hw_get_tsf64(ah); + tsftu = TSF_TO_TU(tsf); + + /* + * Pull nexttbtt forward to reflect the current + * TSF. Add one intval otherwise the timespan + * can be too short for ibss merges. + */ + nexttbtt = tsftu + 2 * intval; + + ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, + "hw tsftu %u nexttbtt %u intval %u\n", tsftu, nexttbtt, intval); + + intval |= AR5K_BEACON_ENA; + + ath5k_hw_init_beacon(ah, nexttbtt, intval); +} + + +/* + * Configure the beacon timers and interrupts based on the operating mode + * + * When operating in station mode we want to receive a BMISS interrupt when we + * stop seeing beacons from the AP we've associated with so we can look for + * another AP to associate with. + * + * In IBSS mode we need to configure the beacon timers and use a self-linked tx + * descriptor if possible. If the hardware cannot deal with that we enable SWBA + * interrupts to send the beacons from the interrupt handler. + */ +static void +ath5k_beacon_config(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + ath5k_hw_set_intr(ah, 0); + sc->bmisscount = 0; + + if (sc->opmode == IEEE80211_IF_TYPE_STA) { + sc->imask |= AR5K_INT_BMISS; + } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) { + /* + * In IBSS mode enable the beacon timers but only enable SWBA + * interrupts if we need to manually prepare beacon frames. + * Otherwise we use a self-linked tx descriptor and let the + * hardware deal with things. In that case we have to load it + * only once here. + */ + ath5k_beaconq_config(sc); + ath5k_beacon_update_timers(sc); + + if (!ath5k_hw_hasveol(ah)) + sc->imask |= AR5K_INT_SWBA; + else + ath5k_beacon_send(sc); + } + /* TODO else AP */ + + ath5k_hw_set_intr(ah, sc->imask); +} + + +/********************\ +* Interrupt handling * +\********************/ + +static int +ath5k_init(struct ath5k_softc *sc) +{ + int ret; + + mutex_lock(&sc->lock); + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode); + + /* + * Stop anything previously setup. This is safe + * no matter this is the first time through or not. + */ + ath5k_stop_locked(sc); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + sc->curchan = sc->hw->conf.chan; + ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false); + if (ret) { + ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret); + goto done; + } + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath5k_hw_set_txpower_limit(sc->ah, 0); + + /* + * Setup the hardware after reset: the key cache + * is filled as needed and the receive engine is + * set going. Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + ret = ath5k_rx_start(sc); + if (ret) + goto done; + + /* + * Enable interrupts. + */ + sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL | + AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL; + + ath5k_hw_set_intr(sc->ah, sc->imask); + /* Set ack to be sent at low bit-rates */ + ath5k_hw_set_ack_bitrate_high(sc->ah, false); + + mod_timer(&sc->calib_tim, round_jiffies(jiffies + + msecs_to_jiffies(ath5k_calinterval * 1000))); + + ret = 0; +done: + mutex_unlock(&sc->lock); + return ret; +} + +static int +ath5k_stop_locked(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n", + test_bit(ATH_STAT_INVALID, sc->status)); + + /* + * Shutdown the hardware and driver: + * stop output from above + * disable interrupts + * turn off timers + * turn off the radio + * clear transmit machinery + * clear receive machinery + * drain and release tx queues + * reclaim beacon resources + * power down hardware + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + ieee80211_stop_queues(sc->hw); + + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + del_timer_sync(&sc->led_tim); + ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); + __clear_bit(ATH_STAT_LEDBLINKING, sc->status); + } + ath5k_hw_set_intr(ah, 0); + } + ath5k_txq_cleanup(sc); + if (!test_bit(ATH_STAT_INVALID, sc->status)) { + ath5k_rx_stop(sc); + ath5k_hw_phy_disable(ah); + } else + sc->rxlink = NULL; + + return 0; +} + +/* + * Stop the device, grabbing the top-level lock to protect + * against concurrent entry through ath5k_init (which can happen + * if another thread does a system call and the thread doing the + * stop is preempted). + */ +static int +ath5k_stop_hw(struct ath5k_softc *sc) +{ + int ret; + + mutex_lock(&sc->lock); + ret = ath5k_stop_locked(sc); + if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) { + /* + * Set the chip in full sleep mode. Note that we are + * careful to do this only when bringing the interface + * completely to a stop. When the chip is in this state + * it must be carefully woken up or references to + * registers in the PCI clock domain may freeze the bus + * (and system). This varies by chip and is mostly an + * issue with newer parts that go to sleep more quickly. + */ + if (sc->ah->ah_mac_srev >= 0x78) { + /* + * XXX + * don't put newer MAC revisions > 7.8 to sleep because + * of the above mentioned problems + */ + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, " + "not putting device to sleep\n"); + } else { + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, + "putting device to full sleep\n"); + ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0); + } + } + ath5k_txbuf_free(sc, sc->bbuf); + mutex_unlock(&sc->lock); + + del_timer_sync(&sc->calib_tim); + + return ret; +} + +static irqreturn_t +ath5k_intr(int irq, void *dev_id) +{ + struct ath5k_softc *sc = dev_id; + struct ath5k_hw *ah = sc->ah; + enum ath5k_int status; + unsigned int counter = 1000; + + if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) || + !ath5k_hw_is_intr_pending(ah))) + return IRQ_NONE; + + do { + /* + * Figure out the reason(s) for the interrupt. Note + * that get_isr returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n", + status, sc->imask); + status &= sc->imask; /* discard unasked for bits */ + if (unlikely(status & AR5K_INT_FATAL)) { + /* + * Fatal errors are unrecoverable. + * Typically these are caused by DMA errors. + */ + tasklet_schedule(&sc->restq); + } else if (unlikely(status & AR5K_INT_RXORN)) { + tasklet_schedule(&sc->restq); + } else { + if (status & AR5K_INT_SWBA) { + /* + * Software beacon alert--time to send a beacon. + * Handle beacon transmission directly; deferring + * this is too slow to meet timing constraints + * under load. + */ + ath5k_beacon_send(sc); + } + if (status & AR5K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work at + * least on older hardware revs. + */ + sc->rxlink = NULL; + } + if (status & AR5K_INT_TXURN) { + /* bump tx trigger level */ + ath5k_hw_update_tx_triglevel(ah, true); + } + if (status & AR5K_INT_RX) + tasklet_schedule(&sc->rxtq); + if (status & AR5K_INT_TX) + tasklet_schedule(&sc->txtq); + if (status & AR5K_INT_BMISS) { + } + if (status & AR5K_INT_MIB) { + /* TODO */ + } + } + } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0); + + if (unlikely(!counter)) + ATH5K_WARN(sc, "too many interrupts, giving up for now\n"); + + return IRQ_HANDLED; +} + +static void +ath5k_tasklet_reset(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + + ath5k_reset(sc->hw); +} + +/* + * Periodically recalibrate the PHY to account + * for temperature/environment changes. + */ +static void +ath5k_calibrate(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + struct ath5k_hw *ah = sc->ah; + + ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", + sc->curchan->chan, sc->curchan->val); + + if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) { + /* + * Rfgain is out of bounds, reset the chip + * to load new gain values. + */ + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n"); + ath5k_reset(sc->hw); + } + if (ath5k_hw_phy_calibrate(ah, sc->curchan)) + ATH5K_ERR(sc, "calibration of channel %u failed\n", + sc->curchan->chan); + + mod_timer(&sc->calib_tim, round_jiffies(jiffies + + msecs_to_jiffies(ath5k_calinterval * 1000))); +} + + + +/***************\ +* LED functions * +\***************/ + +static void +ath5k_led_off(unsigned long data) +{ + struct ath5k_softc *sc = (void *)data; + + if (test_bit(ATH_STAT_LEDENDBLINK, sc->status)) + __clear_bit(ATH_STAT_LEDBLINKING, sc->status); + else { + __set_bit(ATH_STAT_LEDENDBLINK, sc->status); + ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); + mod_timer(&sc->led_tim, jiffies + sc->led_off); + } +} + +/* + * Blink the LED according to the specified on/off times. + */ +static void +ath5k_led_blink(struct ath5k_softc *sc, unsigned int on, + unsigned int off) +{ + ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off); + ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); + __set_bit(ATH_STAT_LEDBLINKING, sc->status); + __clear_bit(ATH_STAT_LEDENDBLINK, sc->status); + sc->led_off = off; + mod_timer(&sc->led_tim, jiffies + on); +} + +static void +ath5k_led_event(struct ath5k_softc *sc, int event) +{ + if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status))) + return; + if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status))) + return; /* don't interrupt active blink */ + switch (event) { + case ATH_LED_TX: + ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon, + sc->hwmap[sc->led_txrate].ledoff); + break; + case ATH_LED_RX: + ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon, + sc->hwmap[sc->led_rxrate].ledoff); + break; + } +} + + + + +/********************\ +* Mac80211 functions * +\********************/ + +static int +ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *ctl) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_buf *bf; + unsigned long flags; + int hdrlen; + int pad; + + ath5k_debug_dump_skb(sc, skb, "TX ", 1); + + if (sc->opmode == IEEE80211_IF_TYPE_MNTR) + ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n"); + + /* + * the hardware expects the header padded to 4 byte boundaries + * if this is not the case we add the padding after the header + */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + pad = hdrlen % 4; + if (skb_headroom(skb) < pad) { + ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough" + " headroom to pad %d\n", hdrlen, pad); + return -1; + } + skb_push(skb, pad); + memmove(skb->data, skb->data+pad, hdrlen); + } + + sc->led_txrate = ctl->tx_rate; + + spin_lock_irqsave(&sc->txbuflock, flags); + if (list_empty(&sc->txbuf)) { + ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); + spin_unlock_irqrestore(&sc->txbuflock, flags); + ieee80211_stop_queue(hw, ctl->queue); + return -1; + } + bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); + list_del(&bf->list); + sc->txbuf_len--; + if (list_empty(&sc->txbuf)) + ieee80211_stop_queues(hw); + spin_unlock_irqrestore(&sc->txbuflock, flags); + + bf->skb = skb; + + if (ath5k_txbuf_setup(sc, bf, ctl)) { + bf->skb = NULL; + spin_lock_irqsave(&sc->txbuflock, flags); + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + spin_unlock_irqrestore(&sc->txbuflock, flags); + dev_kfree_skb_any(skb); + return 0; + } + + return 0; +} + +static int +ath5k_reset(struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + int ret; + + ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); + /* + * Convert to a hw channel description with the flags + * constrained to reflect the current operating mode. + */ + sc->curchan = hw->conf.chan; + + ath5k_hw_set_intr(ah, 0); + ath5k_txq_cleanup(sc); + ath5k_rx_stop(sc); + + ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); + if (unlikely(ret)) { + ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); + goto err; + } + ath5k_hw_set_txpower_limit(sc->ah, 0); + + ret = ath5k_rx_start(sc); + if (unlikely(ret)) { + ATH5K_ERR(sc, "can't start recv logic\n"); + goto err; + } + /* + * We may be doing a reset in response to an ioctl + * that changes the channel so update any state that + * might change as a result. + * + * XXX needed? + */ +/* ath5k_chan_change(sc, c); */ + ath5k_beacon_config(sc); + /* intrs are started by ath5k_beacon_config */ + + ieee80211_wake_queues(hw); + + return 0; +err: + return ret; +} + +static int ath5k_start(struct ieee80211_hw *hw) +{ + return ath5k_init(hw->priv); +} + +static void ath5k_stop(struct ieee80211_hw *hw) +{ + ath5k_stop_hw(hw->priv); +} + +static int ath5k_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath5k_softc *sc = hw->priv; + int ret; + + mutex_lock(&sc->lock); + if (sc->iface_id) { + ret = 0; + goto end; + } + + sc->iface_id = conf->if_id; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + case IEEE80211_IF_TYPE_MNTR: + sc->opmode = conf->type; + break; + default: + ret = -EOPNOTSUPP; + goto end; + } + ret = 0; +end: + mutex_unlock(&sc->lock); + return ret; +} + +static void +ath5k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ath5k_softc *sc = hw->priv; + + mutex_lock(&sc->lock); + if (sc->iface_id != conf->if_id) + goto end; + + sc->iface_id = 0; +end: + mutex_unlock(&sc->lock); +} + +static int +ath5k_config(struct ieee80211_hw *hw, + struct ieee80211_conf *conf) +{ + struct ath5k_softc *sc = hw->priv; + + sc->bintval = conf->beacon_int * 1000 / 1024; + ath5k_setcurmode(sc, conf->phymode); + + return ath5k_chan_set(sc, conf->chan); +} + +static int +ath5k_config_interface(struct ieee80211_hw *hw, int if_id, + struct ieee80211_if_conf *conf) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + int ret; + + /* Set to a reasonable value. Note that this will + * be set to mac80211's value at ath5k_config(). */ + sc->bintval = 1000 * 1000 / 1024; + mutex_lock(&sc->lock); + if (sc->iface_id != if_id) { + ret = -EIO; + goto unlock; + } + if (conf->bssid) { + /* Cache for later use during resets */ + memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN); + /* XXX: assoc id is set to 0 for now, mac80211 doesn't have + * a clean way of letting us retrieve this yet. */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + } + mutex_unlock(&sc->lock); + + return ath5k_reset(hw); +unlock: + mutex_unlock(&sc->lock); + return ret; +} + +#define SUPPORTED_FIF_FLAGS \ + FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \ + FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC +/* + * o always accept unicast, broadcast, and multicast traffic + * o multicast traffic for all BSSIDs will be enabled if mac80211 + * says it should be + * o maintain current state of phy ofdm or phy cck error reception. + * If the hardware detects any of these type of errors then + * ath5k_hw_get_rx_filter() will pass to us the respective + * hardware filters to be able to receive these type of frames. + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when scanning + */ +static void ath5k_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 mfilt[2], val, rfilt; + u8 pos; + int i; + + mfilt[0] = 0; + mfilt[1] = 0; + + /* Only deal with supported flags */ + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + /* If HW detects any phy or radar errors, leave those filters on. + * Also, always enable Unicast, Broadcasts and Multicast + * XXX: move unicast, bssid broadcasts and multicast to mac80211 */ + rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) | + (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | + AR5K_RX_FILTER_MCAST); + + if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) { + if (*new_flags & FIF_PROMISC_IN_BSS) { + rfilt |= AR5K_RX_FILTER_PROM; + __set_bit(ATH_STAT_PROMISC, sc->status); + } + else + __clear_bit(ATH_STAT_PROMISC, sc->status); + } + + /* Note, AR5K_RX_FILTER_MCAST is already enabled */ + if (*new_flags & FIF_ALLMULTI) { + mfilt[0] = ~0; + mfilt[1] = ~0; + } else { + for (i = 0; i < mc_count; i++) { + if (!mclist) + break; + /* calculate XOR of eight 6-bit values */ + val = LE_READ_4(mclist->dmi_addr + 0); + pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + val = LE_READ_4(mclist->dmi_addr + 3); + pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; + pos &= 0x3f; + mfilt[pos / 32] |= (1 << (pos % 32)); + /* XXX: we might be able to just do this instead, + * but not sure, needs testing, if we do use this we'd + * neet to inform below to not reset the mcast */ + /* ath5k_hw_set_mcast_filterindex(ah, + * mclist->dmi_addr[5]); */ + mclist = mclist->next; + } + } + + /* This is the best we can do */ + if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL)) + rfilt |= AR5K_RX_FILTER_PHYERR; + + /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons + * and probes for any BSSID, this needs testing */ + if (*new_flags & FIF_BCN_PRBRESP_PROMISC) + rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ; + + /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not + * set we should only pass on control frames for this + * station. This needs testing. I believe right now this + * enables *all* control frames, which is OK.. but + * but we should see if we can improve on granularity */ + if (*new_flags & FIF_CONTROL) + rfilt |= AR5K_RX_FILTER_CONTROL; + + /* Additional settings per mode -- this is per ath5k */ + + /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */ + + if (sc->opmode == IEEE80211_IF_TYPE_MNTR) + rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON | + AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM; + if (sc->opmode != IEEE80211_IF_TYPE_STA) + rfilt |= AR5K_RX_FILTER_PROBEREQ; + if (sc->opmode != IEEE80211_IF_TYPE_AP && + test_bit(ATH_STAT_PROMISC, sc->status)) + rfilt |= AR5K_RX_FILTER_PROM; + if (sc->opmode == IEEE80211_IF_TYPE_STA || + sc->opmode == IEEE80211_IF_TYPE_IBSS) { + rfilt |= AR5K_RX_FILTER_BEACON; + } + + /* Set filters */ + ath5k_hw_set_rx_filter(ah,rfilt); + + /* Set multicast bits */ + ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); + /* Set the cached hw filter flags, this will alter actually + * be set in HW */ + sc->filter_flags = rfilt; +} + +static int +ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + const u8 *local_addr, const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct ath5k_softc *sc = hw->priv; + int ret = 0; + + switch(key->alg) { + case ALG_WEP: + break; + case ALG_TKIP: + case ALG_CCMP: + return -EOPNOTSUPP; + default: + WARN_ON(1); + return -EINVAL; + } + + mutex_lock(&sc->lock); + + switch (cmd) { + case SET_KEY: + ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr); + if (ret) { + ATH5K_ERR(sc, "can't set the key\n"); + goto unlock; + } + __set_bit(key->keyidx, sc->keymap); + key->hw_key_idx = key->keyidx; + break; + case DISABLE_KEY: + ath5k_hw_reset_key(sc->ah, key->keyidx); + __clear_bit(key->keyidx, sc->keymap); + break; + default: + ret = -EINVAL; + goto unlock; + } + +unlock: + mutex_unlock(&sc->lock); + return ret; +} + +static int +ath5k_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct ath5k_softc *sc = hw->priv; + + memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats)); + + return 0; +} + +static int +ath5k_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + struct ath5k_softc *sc = hw->priv; + + memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats)); + + return 0; +} + +static u64 +ath5k_get_tsf(struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + + return ath5k_hw_get_tsf64(sc->ah); +} + +static void +ath5k_reset_tsf(struct ieee80211_hw *hw) +{ + struct ath5k_softc *sc = hw->priv; + + ath5k_hw_reset_tsf(sc->ah); +} + +static int +ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_control *ctl) +{ + struct ath5k_softc *sc = hw->priv; + int ret; + + ath5k_debug_dump_skb(sc, skb, "BC ", 1); + + mutex_lock(&sc->lock); + + if (sc->opmode != IEEE80211_IF_TYPE_IBSS) { + ret = -EIO; + goto end; + } + + ath5k_txbuf_free(sc, sc->bbuf); + sc->bbuf->skb = skb; + ret = ath5k_beacon_setup(sc, sc->bbuf, ctl); + if (ret) + sc->bbuf->skb = NULL; + else + ath5k_beacon_config(sc); + +end: + mutex_unlock(&sc->lock); + return ret; +} + diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h new file mode 100644 index 000000000000..927d67db3dc2 --- /dev/null +++ b/drivers/net/wireless/ath5k/base.h @@ -0,0 +1,178 @@ +/*- + * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +/* + * Defintions for the Atheros Wireless LAN controller driver. + */ +#ifndef _DEV_ATH_ATHVAR_H +#define _DEV_ATH_ATHVAR_H + +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/wireless.h> +#include <linux/if_ether.h> + +#include "ath5k.h" +#include "debug.h" + +#define ATH_RXBUF 40 /* number of RX buffers */ +#define ATH_TXBUF 200 /* number of TX buffers */ +#define ATH_BCBUF 1 /* number of beacon buffers */ + +struct ath5k_buf { + struct list_head list; + unsigned int flags; /* tx descriptor flags */ + struct ath5k_desc *desc; /* virtual addr of desc */ + dma_addr_t daddr; /* physical addr of desc */ + struct sk_buff *skb; /* skbuff for buf */ + dma_addr_t skbaddr;/* physical addr of skb data */ + struct ieee80211_tx_control ctl; +}; + +/* + * Data transmit queue state. One of these exists for each + * hardware transmit queue. Packets sent to us from above + * are assigned to queues based on their priority. Not all + * devices support a complete set of hardware transmit queues. + * For those devices the array sc_ac2q will map multiple + * priorities to fewer hardware queues (typically all to one + * hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; /* hardware q number */ + u32 *link; /* link ptr in last TX desc */ + struct list_head q; /* transmit queue */ + spinlock_t lock; /* lock on q and link */ + bool setup; +}; + +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26+26+26+200+200) +#else +#define ATH_CHAN_MAX (14+14+14+252+20) /* XXX what's the max? */ +#endif + +/* Software Carrier, keeps track of the driver state + * associated with an instance of a device */ +struct ath5k_softc { + struct pci_dev *pdev; /* for dma mapping */ + void __iomem *iobase; /* address of the device */ + struct mutex lock; /* dev-level lock */ + struct ieee80211_tx_queue_stats tx_stats; + struct ieee80211_low_level_stats ll_stats; + struct ieee80211_hw *hw; /* IEEE 802.11 common */ + struct ieee80211_hw_mode modes[NUM_DRIVER_MODES]; + struct ieee80211_channel channels[ATH_CHAN_MAX]; + struct ieee80211_rate rates[AR5K_MAX_RATES * NUM_DRIVER_MODES]; + enum ieee80211_if_types opmode; + struct ath5k_hw *ah; /* Atheros HW */ + +#if ATH5K_DEBUG + struct ath5k_dbg_info debug; /* debug info */ +#endif + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + dma_addr_t desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + u16 cachelsz; /* cache line size */ + + DECLARE_BITMAP(status, 6); +#define ATH_STAT_INVALID 0 /* disable hardware accesses */ +#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ +#define ATH_STAT_PROMISC 2 +#define ATH_STAT_LEDBLINKING 3 /* LED blink operation active */ +#define ATH_STAT_LEDENDBLINK 4 /* finish LED blink operation */ +#define ATH_STAT_LEDSOFT 5 /* enable LED gpio status */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + unsigned int curmode; /* current phy mode */ + struct ieee80211_channel *curchan; /* current h/w channel */ + + int iface_id; /* add/remove_interface id */ + + struct { + u8 rxflags; /* radiotap rx flags */ + u8 txflags; /* radiotap tx flags */ + u16 ledon; /* softled on time */ + u16 ledoff; /* softled off time */ + } hwmap[32]; /* h/w rate ix mappings */ + + enum ath5k_int imask; /* interrupt mask copy */ + + DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int led_pin, /* GPIO pin for driving LED */ + led_on, /* pin setting for LED on */ + led_off; /* off time for current blink */ + struct timer_list led_tim; /* led off timer */ + u8 led_rxrate; /* current rx rate for LED */ + u8 led_txrate; /* current tx rate for LED */ + + struct tasklet_struct restq; /* reset tasklet */ + + unsigned int rxbufsize; /* rx size based on mtu */ + struct list_head rxbuf; /* receive buffer */ + spinlock_t rxbuflock; + u32 *rxlink; /* link ptr in last RX desc */ + struct tasklet_struct rxtq; /* rx intr tasklet */ + + struct list_head txbuf; /* transmit buffer */ + spinlock_t txbuflock; + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txqs[2]; /* beacon and tx */ + + struct ath5k_txq *txq; /* beacon and tx*/ + struct tasklet_struct txtq; /* tx intr tasklet */ + + struct ath5k_buf *bbuf; /* beacon buffer */ + unsigned int bhalq, /* SW q for outgoing beacons */ + bmisscount, /* missed beacon transmits */ + bintval, /* beacon interval */ + bsent; + + struct timer_list calib_tim; /* calibration timer */ +}; + +#define ath5k_hw_hasbssidmask(_ah) \ + (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0) +#define ath5k_hw_hasveol(_ah) \ + (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0) + +#endif diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c new file mode 100644 index 000000000000..4ba649e20269 --- /dev/null +++ b/drivers/net/wireless/ath5k/debug.c @@ -0,0 +1,469 @@ +/* + * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com> + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#include "debug.h" +#include "base.h" + +static unsigned int ath5k_debug; +module_param_named(debug, ath5k_debug, uint, 0); + + +#if ATH5K_DEBUG + +#include <linux/seq_file.h> +#include "reg.h" + +static struct dentry *ath5k_global_debugfs; + +static int ath5k_debugfs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + + +/* debugfs: registers */ + +struct reg { + char *name; + int addr; +}; + +#define REG_STRUCT_INIT(r) { #r, r } + +/* just a few random registers, might want to add more */ +static struct reg regs[] = { + REG_STRUCT_INIT(AR5K_CR), + REG_STRUCT_INIT(AR5K_RXDP), + REG_STRUCT_INIT(AR5K_CFG), + REG_STRUCT_INIT(AR5K_IER), + REG_STRUCT_INIT(AR5K_BCR), + REG_STRUCT_INIT(AR5K_RTSD0), + REG_STRUCT_INIT(AR5K_RTSD1), + REG_STRUCT_INIT(AR5K_TXCFG), + REG_STRUCT_INIT(AR5K_RXCFG), + REG_STRUCT_INIT(AR5K_RXJLA), + REG_STRUCT_INIT(AR5K_MIBC), + REG_STRUCT_INIT(AR5K_TOPS), + REG_STRUCT_INIT(AR5K_RXNOFRM), + REG_STRUCT_INIT(AR5K_TXNOFRM), + REG_STRUCT_INIT(AR5K_RPGTO), + REG_STRUCT_INIT(AR5K_RFCNT), + REG_STRUCT_INIT(AR5K_MISC), + REG_STRUCT_INIT(AR5K_QCUDCU_CLKGT), + REG_STRUCT_INIT(AR5K_ISR), + REG_STRUCT_INIT(AR5K_PISR), + REG_STRUCT_INIT(AR5K_SISR0), + REG_STRUCT_INIT(AR5K_SISR1), + REG_STRUCT_INIT(AR5K_SISR2), + REG_STRUCT_INIT(AR5K_SISR3), + REG_STRUCT_INIT(AR5K_SISR4), + REG_STRUCT_INIT(AR5K_IMR), + REG_STRUCT_INIT(AR5K_PIMR), + REG_STRUCT_INIT(AR5K_SIMR0), + REG_STRUCT_INIT(AR5K_SIMR1), + REG_STRUCT_INIT(AR5K_SIMR2), + REG_STRUCT_INIT(AR5K_SIMR3), + REG_STRUCT_INIT(AR5K_SIMR4), + REG_STRUCT_INIT(AR5K_DCM_ADDR), + REG_STRUCT_INIT(AR5K_DCCFG), + REG_STRUCT_INIT(AR5K_CCFG), + REG_STRUCT_INIT(AR5K_CPC0), + REG_STRUCT_INIT(AR5K_CPC1), + REG_STRUCT_INIT(AR5K_CPC2), + REG_STRUCT_INIT(AR5K_CPC3), + REG_STRUCT_INIT(AR5K_CPCORN), + REG_STRUCT_INIT(AR5K_RESET_CTL), + REG_STRUCT_INIT(AR5K_SLEEP_CTL), + REG_STRUCT_INIT(AR5K_INTPEND), + REG_STRUCT_INIT(AR5K_SFR), + REG_STRUCT_INIT(AR5K_PCICFG), + REG_STRUCT_INIT(AR5K_GPIOCR), + REG_STRUCT_INIT(AR5K_GPIODO), + REG_STRUCT_INIT(AR5K_SREV), +}; + +static void *reg_start(struct seq_file *seq, loff_t *pos) +{ + return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL; +} + +static void reg_stop(struct seq_file *seq, void *p) +{ + /* nothing to do */ +} + +static void *reg_next(struct seq_file *seq, void *p, loff_t *pos) +{ + ++*pos; + return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL; +} + +static int reg_show(struct seq_file *seq, void *p) +{ + struct ath5k_softc *sc = seq->private; + struct reg *r = p; + seq_printf(seq, "%-25s0x%08x\n", r->name, + ath5k_hw_reg_read(sc->ah, r->addr)); + return 0; +} + +static struct seq_operations register_seq_ops = { + .start = reg_start, + .next = reg_next, + .stop = reg_stop, + .show = reg_show +}; + +static int open_file_registers(struct inode *inode, struct file *file) +{ + struct seq_file *s; + int res; + res = seq_open(file, ®ister_seq_ops); + if (res == 0) { + s = file->private_data; + s->private = inode->i_private; + } + return res; +} + +static const struct file_operations fops_registers = { + .open = open_file_registers, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .owner = THIS_MODULE, +}; + + +/* debugfs: TSF */ + +static ssize_t read_file_tsf(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + char buf[100]; + snprintf(buf, 100, "0x%016llx\n", ath5k_hw_get_tsf64(sc->ah)); + return simple_read_from_buffer(user_buf, count, ppos, buf, 19); +} + +static ssize_t write_file_tsf(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + if (strncmp(userbuf, "reset", 5) == 0) { + ath5k_hw_reset_tsf(sc->ah); + printk(KERN_INFO "debugfs reset TSF\n"); + } + return count; +} + +static const struct file_operations fops_tsf = { + .read = read_file_tsf, + .write = write_file_tsf, + .open = ath5k_debugfs_open, + .owner = THIS_MODULE, +}; + + +/* debugfs: beacons */ + +static ssize_t read_file_beacon(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = sc->ah; + char buf[1000]; + int len = 0; + unsigned int v; + u64 tsf; + + v = ath5k_hw_reg_read(sc->ah, AR5K_BEACON); + len += snprintf(buf+len, sizeof(buf)-len, + "%-24s0x%08x\tintval: %d\tTIM: 0x%x\n", + "AR5K_BEACON", v, v & AR5K_BEACON_PERIOD, + (v & AR5K_BEACON_TIM) >> AR5K_BEACON_TIM_S); + + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n", + "AR5K_LAST_TSTP", ath5k_hw_reg_read(sc->ah, AR5K_LAST_TSTP)); + + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\n\n", + "AR5K_BEACON_CNT", ath5k_hw_reg_read(sc->ah, AR5K_BEACON_CNT)); + + v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER0); + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER0 (TBTT)", v, v); + + v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER1); + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER1 (DMA)", v, v >> 3); + + v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER2); + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER2 (SWBA)", v, v >> 3); + + v = ath5k_hw_reg_read(sc->ah, AR5K_TIMER3); + len += snprintf(buf+len, sizeof(buf)-len, "%-24s0x%08x\tTU: %08x\n", + "AR5K_TIMER3 (ATIM)", v, v); + + tsf = ath5k_hw_get_tsf64(sc->ah); + len += snprintf(buf+len, sizeof(buf)-len, + "TSF\t\t0x%016llx\tTU: %08x\n", tsf, TSF_TO_TU(tsf)); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t write_file_beacon(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + struct ath5k_hw *ah = sc->ah; + + if (strncmp(userbuf, "disable", 7) == 0) { + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + printk(KERN_INFO "debugfs disable beacons\n"); + } else if (strncmp(userbuf, "enable", 6) == 0) { + AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + printk(KERN_INFO "debugfs enable beacons\n"); + } + return count; +} + +static const struct file_operations fops_beacon = { + .read = read_file_beacon, + .write = write_file_beacon, + .open = ath5k_debugfs_open, + .owner = THIS_MODULE, +}; + + +/* debugfs: reset */ + +static ssize_t write_file_reset(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct ath5k_softc *sc = file->private_data; + tasklet_schedule(&sc->restq); + return count; +} + +static const struct file_operations fops_reset = { + .write = write_file_reset, + .open = ath5k_debugfs_open, + .owner = THIS_MODULE, +}; + + +/* init */ + +void +ath5k_debug_init(void) +{ + ath5k_global_debugfs = debugfs_create_dir("ath5k", NULL); +} + +void +ath5k_debug_init_device(struct ath5k_softc *sc) +{ + sc->debug.level = ath5k_debug; + sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), + ath5k_global_debugfs); + sc->debug.debugfs_debug = debugfs_create_u32("debug", + 0666, sc->debug.debugfs_phydir, &sc->debug.level); + + sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_phydir, + sc, &fops_registers); + + sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_phydir, + sc, &fops_tsf); + + sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_phydir, + sc, &fops_beacon); + + sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_phydir, + sc, &fops_reset); +} + +void +ath5k_debug_finish(void) +{ + debugfs_remove(ath5k_global_debugfs); +} + +void +ath5k_debug_finish_device(struct ath5k_softc *sc) +{ + debugfs_remove(sc->debug.debugfs_debug); + debugfs_remove(sc->debug.debugfs_registers); + debugfs_remove(sc->debug.debugfs_tsf); + debugfs_remove(sc->debug.debugfs_beacon); + debugfs_remove(sc->debug.debugfs_reset); + debugfs_remove(sc->debug.debugfs_phydir); +} + + +/* functions used in other places */ + +void +ath5k_debug_dump_modes(struct ath5k_softc *sc, struct ieee80211_hw_mode *modes) +{ + unsigned int m, i; + + if (likely(!(sc->debug.level & ATH5K_DEBUG_DUMPMODES))) + return; + + for (m = 0; m < NUM_DRIVER_MODES; m++) { + printk(KERN_DEBUG "Mode %u: channels %d, rates %d\n", m, + modes[m].num_channels, modes[m].num_rates); + printk(KERN_DEBUG " channels:\n"); + for (i = 0; i < modes[m].num_channels; i++) + printk(KERN_DEBUG " %3d %d %.4x %.4x\n", + modes[m].channels[i].chan, + modes[m].channels[i].freq, + modes[m].channels[i].val, + modes[m].channels[i].flag); + printk(KERN_DEBUG " rates:\n"); + for (i = 0; i < modes[m].num_rates; i++) + printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n", + modes[m].rates[i].rate, + modes[m].rates[i].val, + modes[m].rates[i].flags, + modes[m].rates[i].val2); + } +} + +static inline void +ath5k_debug_printrxbuf(struct ath5k_buf *bf, int done) +{ + struct ath5k_desc *ds = bf->desc; + + printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n", + ds, (unsigned long long)bf->daddr, + ds->ds_link, ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, + ds->ds_hw[0], ds->ds_hw[1], + !done ? ' ' : (ds->ds_rxstat.rs_status == 0) ? '*' : '!'); +} + +void +ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) +{ + struct ath5k_desc *ds; + struct ath5k_buf *bf; + int status; + + if (likely(!(sc->debug.level & + (ATH5K_DEBUG_RESET | ATH5K_DEBUG_FATAL)))) + return; + + printk(KERN_DEBUG "rx queue %x, link %p\n", + ath5k_hw_get_rx_buf(ah), sc->rxlink); + + spin_lock_bh(&sc->rxbuflock); + list_for_each_entry(bf, &sc->rxbuf, list) { + ds = bf->desc; + status = ah->ah_proc_rx_desc(ah, ds); + if (!status || (sc->debug.level & ATH5K_DEBUG_FATAL)) + ath5k_debug_printrxbuf(bf, status == 0); + } + spin_unlock_bh(&sc->rxbuflock); +} + +void +ath5k_debug_dump_skb(struct ath5k_softc *sc, + struct sk_buff *skb, const char *prefix, int tx) +{ + char buf[16]; + + if (likely(!((tx && (sc->debug.level & ATH5K_DEBUG_DUMP_TX)) || + (!tx && (sc->debug.level & ATH5K_DEBUG_DUMP_RX))))) + return; + + snprintf(buf, sizeof(buf), "%s %s", wiphy_name(sc->hw->wiphy), prefix); + + print_hex_dump_bytes(buf, DUMP_PREFIX_NONE, skb->data, + min(200U, skb->len)); + + printk(KERN_DEBUG "\n"); +} + +void +ath5k_debug_printtxbuf(struct ath5k_softc *sc, + struct ath5k_buf *bf, int done) +{ + struct ath5k_desc *ds = bf->desc; + + if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET))) + return; + + printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x " + "%08x %c\n", ds, (unsigned long long)bf->daddr, ds->ds_link, + ds->ds_data, ds->ds_ctl0, ds->ds_ctl1, + ds->ds_hw[0], ds->ds_hw[1], ds->ds_hw[2], ds->ds_hw[3], + !done ? ' ' : (ds->ds_txstat.ts_status == 0) ? '*' : '!'); +} + +#endif /* if ATH5K_DEBUG */ diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h new file mode 100644 index 000000000000..2b491cbc8c80 --- /dev/null +++ b/drivers/net/wireless/ath5k/debug.h @@ -0,0 +1,216 @@ +/* + * Copyright (c) 2007 Bruno Randolf <bruno@thinktube.com> + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef _ATH5K_DEBUG_H +#define _ATH5K_DEBUG_H + +/* set this to 1 for debugging output */ +#ifndef ATH5K_DEBUG +#define ATH5K_DEBUG 0 +#endif + +struct ath5k_softc; +struct ath5k_hw; +struct ieee80211_hw_mode; +struct sk_buff; +struct ath5k_buf; + +struct ath5k_dbg_info { + unsigned int level; /* debug level */ + /* debugfs entries */ + struct dentry *debugfs_phydir; + struct dentry *debugfs_debug; + struct dentry *debugfs_registers; + struct dentry *debugfs_tsf; + struct dentry *debugfs_beacon; + struct dentry *debugfs_reset; +}; + +/** + * enum ath5k_debug_level - ath5k debug level + * + * @ATH5K_DEBUG_RESET: reset processing + * @ATH5K_DEBUG_INTR: interrupt handling + * @ATH5K_DEBUG_MODE: mode init/setup + * @ATH5K_DEBUG_XMIT: basic xmit operation + * @ATH5K_DEBUG_BEACON: beacon handling + * @ATH5K_DEBUG_BEACON_PROC: beacon ISR proc + * @ATH5K_DEBUG_CALIBRATE: periodic calibration + * @ATH5K_DEBUG_TXPOWER: transmit power setting + * @ATH5K_DEBUG_LED: led management + * @ATH5K_DEBUG_DUMP_RX: print received skb content + * @ATH5K_DEBUG_DUMP_TX: print transmit skb content + * @ATH5K_DEBUG_DUMPMODES: dump modes + * @ATH5K_DEBUG_TRACE: trace function calls + * @ATH5K_DEBUG_FATAL: fatal errors + * @ATH5K_DEBUG_ANY: show at any debug level + * + * The debug level is used to control the amount and type of debugging output + * we want to see. The debug level is given in calls to ATH5K_DBG to specify + * where the message should appear, and the user can control the debugging + * messages he wants to see, either by the module parameter 'debug' on module + * load, or dynamically by using debugfs 'ath5k/phyX/debug'. these levels can + * be combined together by bitwise OR. + */ +enum ath5k_debug_level { + ATH5K_DEBUG_RESET = 0x00000001, + ATH5K_DEBUG_INTR = 0x00000002, + ATH5K_DEBUG_MODE = 0x00000004, + ATH5K_DEBUG_XMIT = 0x00000008, + ATH5K_DEBUG_BEACON = 0x00000010, + ATH5K_DEBUG_BEACON_PROC = 0x00000020, + ATH5K_DEBUG_CALIBRATE = 0x00000100, + ATH5K_DEBUG_TXPOWER = 0x00000200, + ATH5K_DEBUG_LED = 0x00000400, + ATH5K_DEBUG_DUMP_RX = 0x00001000, + ATH5K_DEBUG_DUMP_TX = 0x00002000, + ATH5K_DEBUG_DUMPMODES = 0x00004000, + ATH5K_DEBUG_TRACE = 0x00010000, + ATH5K_DEBUG_FATAL = 0x80000000, + ATH5K_DEBUG_ANY = 0xffffffff +}; + +#if ATH5K_DEBUG + +#define ATH5K_TRACE(_sc) do { \ + if (unlikely((_sc)->debug.level & ATH5K_DEBUG_TRACE)) \ + printk(KERN_DEBUG "ath5k trace %s:%d\n", __func__, __LINE__); \ + } while (0) + +#define ATH5K_DBG(_sc, _m, _fmt, ...) do { \ + if (unlikely((_sc)->debug.level & (_m) && net_ratelimit())) \ + ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + +#define ATH5K_DBG_UNLIMIT(_sc, _m, _fmt, ...) do { \ + if (unlikely((_sc)->debug.level & (_m))) \ + ATH5K_PRINTK(_sc, KERN_DEBUG, "(%s:%d): " _fmt, \ + __func__, __LINE__, ##__VA_ARGS__); \ + } while (0) + +void +ath5k_debug_init(void); + +void +ath5k_debug_init_device(struct ath5k_softc *sc); + +void +ath5k_debug_finish(void); + +void +ath5k_debug_finish_device(struct ath5k_softc *sc); + +void +ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah); + +void +ath5k_debug_dump_modes(struct ath5k_softc *sc, + struct ieee80211_hw_mode *modes); + +void +ath5k_debug_dump_skb(struct ath5k_softc *sc, + struct sk_buff *skb, const char *prefix, int tx); + +void +ath5k_debug_printtxbuf(struct ath5k_softc *sc, + struct ath5k_buf *bf, int done); + +#else /* no debugging */ + +#define ATH5K_TRACE(_sc) /* empty */ + +static inline void __attribute__ ((format (printf, 3, 4))) +ATH5K_DBG(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) {} + +static inline void __attribute__ ((format (printf, 3, 4))) +ATH5K_DBG_UNLIMIT(struct ath5k_softc *sc, unsigned int m, const char *fmt, ...) +{} + +static inline void +ath5k_debug_init(void) {} + +static inline void +ath5k_debug_init_device(struct ath5k_softc *sc) {} + +static inline void +ath5k_debug_finish(void) {} + +static inline void +ath5k_debug_finish_device(struct ath5k_softc *sc) {} + +static inline void +ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) {} + +static inline void +ath5k_debug_dump_modes(struct ath5k_softc *sc, + struct ieee80211_hw_mode *modes) {} + +static inline void +ath5k_debug_dump_skb(struct ath5k_softc *sc, + struct sk_buff *skb, const char *prefix, int tx) {} + +static inline void +ath5k_debug_printtxbuf(struct ath5k_softc *sc, + struct ath5k_buf *bf, int done) {} + +#endif /* if ATH5K_DEBUG */ + +#endif /* ifndef _ATH5K_DEBUG_H */ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c new file mode 100644 index 000000000000..5623d7dc738e --- /dev/null +++ b/drivers/net/wireless/ath5k/hw.c @@ -0,0 +1,4349 @@ + /* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * HW related functions for Atheros Wireless LAN devices. + */ + +#include <linux/pci.h> +#include <linux/delay.h> + +#include "reg.h" +#include "base.h" +#include "debug.h" + +/*Rate tables*/ +static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; +static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; +static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; +static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; +static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; + +/*Prototypes*/ +static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); +static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int); +static bool ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int); +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *); +static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int); +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *); +static int ath5k_hw_proc_new_rx_status(struct ath5k_hw *, struct ath5k_desc *); +static int ath5k_hw_proc_old_rx_status(struct ath5k_hw *, struct ath5k_desc *); +static int ath5k_hw_get_capabilities(struct ath5k_hw *); + +static int ath5k_eeprom_init(struct ath5k_hw *); +static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *); + +static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16); +static int ath5k_hw_disable_pspoll(struct ath5k_hw *); + +/* + * Enable to overwrite the country code (use "00" for debug) + */ +#if 0 +#define COUNTRYCODE "00" +#endif + +/*******************\ + General Functions +\*******************/ + +/* + * Functions used internaly + */ + +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) +{ + return turbo == true ? (usec * 80) : (usec * 40); +} + +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) +{ + return turbo == true ? (clock / 80) : (clock / 40); +} + +/* + * Check if a register write has been completed + */ +int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, + bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if ((is_set == true) && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} + + +/***************************************\ + Attach/Detach Functions +\***************************************/ + +/* + * Check if the device is supported and initialize the needed structs + */ +struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) +{ + struct ath5k_hw *ah; + u8 mac[ETH_ALEN]; + int ret; + u32 srev; + + /*If we passed the test malloc a ath5k_hw struct*/ + ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (ah == NULL) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err; + } + + ah->ah_sc = sc; + ah->ah_iobase = sc->iobase; + + /* + * HW information + */ + + /* Get reg domain from eeprom */ + ath5k_get_regdomain(ah); + + ah->ah_op_mode = IEEE80211_IF_TYPE_STA; + ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; + ah->ah_turbo = false; + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_imr = 0; + ah->ah_atim_window = 0; + ah->ah_aifs = AR5K_TUNE_AIFS; + ah->ah_cw_min = AR5K_TUNE_CWMIN; + ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; + ah->ah_software_retry = false; + ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; + + /* + * Set the mac revision based on the pci id + */ + ah->ah_version = mac_version; + + /*Fill the ath5k_hw struct with the needed functions*/ + if (ah->ah_version == AR5K_AR5212) + ah->ah_magic = AR5K_EEPROM_MAGIC_5212; + else if (ah->ah_version == AR5K_AR5211) + ah->ah_magic = AR5K_EEPROM_MAGIC_5211; + + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + } else { + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + } + + if (ah->ah_version == AR5K_AR5212) + ah->ah_proc_rx_desc = ath5k_hw_proc_new_rx_status; + else if (ah->ah_version <= AR5K_AR5211) + ah->ah_proc_rx_desc = ath5k_hw_proc_old_rx_status; + + /* Bring device out of sleep and reset it's units */ + ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true); + if (ret) + goto err_free; + + /* Get MAC, PHY and RADIO revisions */ + srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ah->ah_mac_srev = srev; + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & + 0xffffffff; + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_5GHZ); + + if (ah->ah_version == AR5K_AR5210) + ah->ah_radio_2ghz_revision = 0; + else + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + + /* Return on unsuported chips (unsupported eeprom etc) */ + if(srev >= AR5K_SREV_VER_AR5416){ + ATH5K_ERR(sc, "Device not yet supported.\n"); + ret = -ENODEV; + goto err_free; + } + + /* Identify single chip solutions */ + if((srev <= AR5K_SREV_VER_AR5414) && + (srev >= AR5K_SREV_VER_AR2424)) { + ah->ah_single_chip = true; + } else { + ah->ah_single_chip = false; + } + + /* Single chip radio */ + if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) + ah->ah_radio_2ghz_revision = 0; + + /* Identify the radio chip*/ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { + ah->ah_radio = AR5K_RF5111; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { + ah->ah_radio = AR5K_RF5112; + } else { + ah->ah_radio = AR5K_RF5413; + } + + ah->ah_phy = AR5K_PHY(0); + + /* + * Get card capabilities, values, ... + */ + + ret = ath5k_eeprom_init(ah); + if (ret) { + ATH5K_ERR(sc, "unable to init EEPROM\n"); + goto err_free; + } + + /* Get misc capabilities */ + ret = ath5k_hw_get_capabilities(ah); + if (ret) { + ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + /* Get MAC address */ + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + ath5k_hw_set_lladdr(ah, mac); + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + memset(ah->ah_bssid, 0xff, ETH_ALEN); + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_rfgain_opt(ah); + + return ah; +err_free: + kfree(ah); +err: + return ERR_PTR(ret); +} + +/* + * Bring up MAC + PHY Chips + */ +static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) +{ + u32 turbo, mode, clock; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Wakeup the device */ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + return ret; + } + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (flags & CHANNEL_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (flags & CHANNEL_CCK) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else if (flags & CHANNEL_OFDM) { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else if (flags & CHANNEL_5GHZ) { + mode |= AR5K_PHY_MODE_FREQ_5GHZ; + clock |= AR5K_PHY_PLL_40MHZ; + + if (flags & CHANNEL_OFDM) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else { + ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); + return -EINVAL; + } + + if (flags & CHANNEL_TURBO) + turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (flags & CHANNEL_TURBO) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + /* ...reset chipset and PCI device */ + if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah, + AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) { + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n"); + return -EIO; + } + + if (ah->ah_version == AR5K_AR5210) + udelay(2300); + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...final warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version != AR5K_AR5210) { + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + udelay(300); + + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + +/* + * Get the rate table for a specific operation mode + */ +const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, + unsigned int mode) +{ + ATH5K_TRACE(ah->ah_sc); + + if (!test_bit(mode, ah->ah_capabilities.cap_mode)) + return NULL; + + /* Get rate tables */ + switch (mode) { + case MODE_IEEE80211A: + return &ath5k_rt_11a; + case MODE_ATHEROS_TURBO: + return &ath5k_rt_turbo; + case MODE_IEEE80211B: + return &ath5k_rt_11b; + case MODE_IEEE80211G: + return &ath5k_rt_11g; + case MODE_ATHEROS_TURBOG: + return &ath5k_rt_xr; + } + + return NULL; +} + +/* + * Free the ath5k_hw struct + */ +void ath5k_hw_detach(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_rf_banks != NULL) + kfree(ah->ah_rf_banks); + + /* assume interrupts are down */ + kfree(ah); +} + +/****************************\ + Reset function and helpers +\****************************/ + +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the OFDM timings for the AR5212 upon reset. This is a helper for + * ath5k_hw_reset(). This seems to tune the PLL a specified frequency + * depending on the bandwidth of the channel. + * + */ +static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + if (!(ah->ah_version == AR5K_AR5212) || + !(channel->val & CHANNEL_OFDM)) + BUG(); + + /* Seems there are two PLLs, one for baseband sampling and one + * for tuning. Tuning basebands are 40 MHz or 80MHz when in + * turbo. */ + clock = channel->val & CHANNEL_TURBO ? 80 : 40; + coef_scaled = ((5 * (clock << 24)) / 2) / + channel->freq; + + for (coef_exp = 31; coef_exp > 0; coef_exp--) + if ((coef_scaled >> coef_exp) & 0x1) + break; + + if (!coef_exp) + return -EINVAL; + + coef_exp = 14 - (coef_exp - 24); + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + +/** + * ath5k_hw_write_rate_duration - set rate duration during hw resets + * + * @ah: the &struct ath5k_hw + * @driver_mode: one of enum ieee80211_phymode or our one of our own + * vendor modes + * + * Write the rate duration table for the current mode upon hw reset. This + * is a helper for ath5k_hw_reset(). It seems all this is doing is setting + * an ACK timeout for the hardware for the current mode for each rate. The + * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, + * and 11Mbps) have another register for the short preamble ACK timeout + * calculation. + * + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int driver_mode) +{ + struct ath5k_softc *sc = ah->ah_sc; + const struct ath5k_rate_table *rt; + unsigned int i; + + /* Get rate table for the current operating mode */ + rt = ath5k_hw_get_rate_table(ah, + driver_mode); + + /* Write rate duration table */ + for (i = 0; i < rt->rate_count; i++) { + const struct ath5k_rate *rate, *control_rate; + u32 reg; + u16 tx_time; + + rate = &rt->rates[i]; + control_rate = &rt->rates[rate->control_rate]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->rate_code); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = ieee80211_generic_frame_duration(sc->hw, + sc->iface_id, 10, control_rate->rate_kbps/100); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!HAS_SHPREAMBLE(i)) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. We could use + * export ieee80211_frame_duration() but that needs to be + * fixed first to be properly used by mac802111 drivers: + * + * - remove erp stuff and let the routine figure ofdm + * erp rates + * - remove passing argument ieee80211_local as + * drivers don't have access to it + * - move drivers using ieee80211_generic_frame_duration() + * to this + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/* + * Main reset function + */ +int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, + struct ieee80211_channel *channel, bool change_channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 data, s_seq, s_ant, s_led[3]; + unsigned int i, mode, freq, ee_mode, ant[2], driver_mode = -1; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + s_seq = 0; + s_ant = 0; + ee_mode = 0; + freq = 0; + mode = 0; + + /* + * Save some registers before a reset + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + if (change_channel == true) { + /* Seq number for queue 0 -do this for all queues ? */ + s_seq = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DFS_SEQNUM(0)); + /*Default antenna*/ + s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + } + } + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + if (change_channel == true && ah->ah_rf_banks != NULL) + ath5k_hw_get_rf_gain(ah); + + + /*Wakeup the device*/ + ret = ath5k_hw_nic_wakeup(ah, channel->val, false); + if (ret) + return ret; + + /* + * Initialize operating mode + */ + ah->ah_op_mode = op_mode; + + /* + * 5111/5112 Settings + * 5210 only comes with RF5110 + */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_radio != AR5K_RF5111 && + ah->ah_radio != AR5K_RF5112 && + ah->ah_radio != AR5K_RF5413) { + ATH5K_ERR(ah->ah_sc, + "invalid phy radio: %u\n", ah->ah_radio); + return -EINVAL; + } + + switch (channel->val & CHANNEL_MODES) { + case CHANNEL_A: + mode = AR5K_INI_VAL_11A; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + driver_mode = MODE_IEEE80211A; + break; + case CHANNEL_G: + mode = AR5K_INI_VAL_11G; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + driver_mode = MODE_IEEE80211G; + break; + case CHANNEL_B: + mode = AR5K_INI_VAL_11B; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11B; + driver_mode = MODE_IEEE80211B; + break; + case CHANNEL_T: + mode = AR5K_INI_VAL_11A_TURBO; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + driver_mode = MODE_ATHEROS_TURBO; + break; + /*Is this ok on 5211 too ?*/ + case CHANNEL_TG: + mode = AR5K_INI_VAL_11G_TURBO; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + driver_mode = MODE_ATHEROS_TURBOG; + break; + case CHANNEL_XR: + if (ah->ah_version == AR5K_AR5211) { + ATH5K_ERR(ah->ah_sc, + "XR mode not available on 5211"); + return -EINVAL; + } + mode = AR5K_INI_VAL_XR; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + driver_mode = MODE_IEEE80211A; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->freq); + return -EINVAL; + } + + /* PHY access enable */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + } + + ret = ath5k_hw_write_initvals(ah, mode, change_channel); + if (ret) + return ret; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Write some more initial register settings + */ + if (ah->ah_version > AR5K_AR5211){ /* found on 5213+ */ + ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11)); + + if (channel->val == CHANNEL_G) + ath5k_hw_reg_write(ah, 0x00f80d80, AR5K_PHY(83)); /* 0x00fc0ec0 */ + else + ath5k_hw_reg_write(ah, 0x00000000, AR5K_PHY(83)); + + ath5k_hw_reg_write(ah, 0x000001b5, 0xa228); /* 0x000009b5 */ + ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); + ath5k_hw_reg_write(ah, 0x0000000f, 0x8060); + ath5k_hw_reg_write(ah, 0x00000000, 0xa254); + ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio >= AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->val & CHANNEL_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + } + + /* + * Set TX power (FIXME) + */ + ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); + if (ret) + return ret; + + /* Write rate duration table */ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_write_rate_duration(ah, driver_mode); + + /* + * Write RF registers + * TODO:Does this work on 5211 (5111) ? + */ + ret = ath5k_hw_rfregs(ah, channel, mode); + if (ret) + return ret; + + /* + * Configure additional registers + */ + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->val & CHANNEL_OFDM) { + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (driver_mode == MODE_IEEE80211B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + /* + * Set channel and calibrate the PHY + */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* Set antenna mode */ + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44), + ah->ah_antenna[ee_mode][0], 0xfffffc06); + + /* + * In case a fixed antenna was set as default + * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE + * registers. + */ + if (s_ant != 0){ + if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ + ant[0] = ant[1] = AR5K_ANT_FIXED_A; + else /* 2 - Aux */ + ant[0] = ant[1] = AR5K_ANT_FIXED_B; + } else { + ant[0] = AR5K_ANT_FIXED_A; + ant[1] = AR5K_ANT_FIXED_B; + } + + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + AR5K_PHY_ANT_SWITCH_TABLE_1); + + /* Commit values from EEPROM */ + if (ah->ah_radio == AR5K_RF5111) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); + + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY(0x5a)); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11), + (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, + 0xffffc07f); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12), + (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, + 0xfffc0fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14), + (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | + ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), + 0xffff0000); + + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d)); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a), + ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19), + (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CORR_ENABLE | + (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | + ee->ee_q_cal[ee_mode]); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + + } else { + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* + * Restore saved values + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); + ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); + } + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Misc + */ + /* XXX: add ah->aid once mac80211 gives this to us */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + + ath5k_hw_set_opmode(ah); + /*PISR/SISR Not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + /* If we later allow tuning for this, store into sc structure */ + data = AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; + ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); + } + + /* + * Set Rx/Tx DMA Configuration + *(passing dma size not available on 5210) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_SDMAMR, + AR5K_DMASIZE_512B | AR5K_TXCFG_DMASIZE); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_SDMAMW, + AR5K_DMASIZE_512B); + } + + /* + * Enable the PHY and wait until completion + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * 5111/5112 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + data = (channel->val & CHANNEL_CCK) ? + ((data << 2) / 22) : (data / 10); + + udelay(100 + data); + } else { + mdelay(1); + } + + /* + * Enable calibration and wait until completion + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL); + + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + channel->freq); + return -EAGAIN; + } + + ret = ath5k_hw_noise_floor_calibration(ah, channel->freq); + if (ret) + return ret; + + ah->ah_calibration = false; + + /* A and G modes can use QAM modulation which requires enabling + * I and Q calibration. Don't bother in B mode. */ + if (!(driver_mode == MODE_IEEE80211B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* + * Reset queues and start beacon timers at the end of the reset routine + */ + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + /*No QCU on 5210*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); + + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX | + AR5K_INT_FATAL); + + /* + * Set RF kill flags if supported by the device (read from the EEPROM) + * Disable gpio_intr for now since it results system hang. + * TODO: Handle this in ath5k_intr + */ +#if 0 + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { + ath5k_hw_set_gpio_input(ah, 0); + ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); + if (ah->ah_gpio[0] == 0) + ath5k_hw_set_gpio_intr(ah, 0, 1); + else + ath5k_hw_set_gpio_intr(ah, 0, 0); + } +#endif + + /* + * Set the 32MHz reference clock on 5212 phy clock sleep register + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + ath5k_hw_reg_write(ah, ah->ah_radio == AR5K_RF5111 ? + AR5K_PHY_SPENDING_RF5111 : AR5K_PHY_SPENDING_RF5112, + AR5K_PHY_SPENDING); + } + + /* + * Disable beacons and reset the register + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | + AR5K_BEACON_RESET_TSF); + + return 0; +} + +/* + * Reset chipset + */ +static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + ATH5K_TRACE(ah->ah_sc); + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + udelay(15); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_CHIP; + mask &= AR5K_RESET_CTL_CHIP; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/* + * Power management functions + */ + +/* + * Sleep control + */ +int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid; + + ATH5K_TRACE(ah->ah_sc); + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + /* fallthrough */ + case AR5K_PM_NETWORK_SLEEP: + if (set_chip == true) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE | sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip == true) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + if (set_chip == false) + goto commit; + + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + + for (i = 5000; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + udelay(200); + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i <= 0) + return -EIO; + + staid &= ~AR5K_STA_ID1_PWR_SV; + break; + + default: + return -EINVAL; + } + +commit: + ah->ah_power_mode = mode; + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/***********************\ + DMA Related Functions +\***********************/ + +/* + * Receive functions + */ + +/* + * Start DMA receive + */ +void ath5k_hw_start_rx(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); +} + +/* + * Stop DMA receive + */ +int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 2000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(10); + + return i ? 0 : -EBUSY; +} + +/* + * Get the address of the RX Descriptor + */ +u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/* + * Set the address of the RX Descriptor + */ +void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr) +{ + ATH5K_TRACE(ah->ah_sc); + + /*TODO:Shouldn't we check if RX is enabled first ?*/ + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); +} + +/* + * Transmit functions + */ + +/* + * Start DMA transmit for a specific queue + * (see also QCU/DCU functions) + */ +int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/* + * Stop DMA transmit for a specific queue + * (see also QCU/DCU functions) + */ +int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 100; + u32 tx_queue, pending; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + } else { + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /*Check for pending frames*/ + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + } + + /* TODO: Check for success else return error */ + return 0; +} + +/* + * Get the address of the TX Descriptor for a specific queue + * (see also QCU/DCU functions) + */ +u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/* + * Set the address of the TX Descriptor for a specific queue + * (see also QCU/DCU functions) + */ +int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/* + * Update tx trigger level + */ +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + /*TODO: Boundary check on trigger_level*/ + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (increase == false) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_intr(ah, imr); + + return ret; +} + +/* + * Interrupt handling + */ + +/* + * Check if we have pending interrupts + */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_INTPEND); +} + +/* + * Get interrupt mask (ISR) + */ +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Read interrupt status from the Interrupt Status register + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(data == AR5K_INT_NOCARD)) { + *interrupt_mask = data; + return -ENODEV; + } + } else { + /* + * Read interrupt status from the Read-And-Clear shadow register + * Note: PISR/SISR Not available on 5210 + */ + data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + } + + /* + * Get abstract interrupt mask (driver-compatible) + */ + *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + + if (unlikely(data == AR5K_INT_NOCARD)) + return -ENODEV; + + if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) + *interrupt_mask |= AR5K_INT_RX; + + if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR + | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) + *interrupt_mask |= AR5K_INT_TX; + + if (ah->ah_version != AR5K_AR5210) { + /*HIU = Host Interface Unit (PCI etc)*/ + if (unlikely(data & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(data & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + } + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successfull assoc + some jiffies. + */ +#if 0 + interrupt_mask &= ~AR5K_INT_BMISS; +#endif + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("0x%08x\n", data); + + return 0; +} + +/* + * Set interrupt mask + */ +enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards). + */ + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + + old_mask = ah->ah_imr; + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (new_mask & AR5K_INT_RX) + int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | + AR5K_IMR_RXDESC; + + if (new_mask & AR5K_INT_TX) + int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | + AR5K_IMR_TXURN; + + if (ah->ah_version != AR5K_AR5210) { + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | + AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); + } + } + + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts */ + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + + return old_mask; +} + + +/*************************\ + EEPROM access functions +\*************************/ + +/* + * Read from eeprom + */ +static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) +{ + u32 status, timeout; + + ATH5K_TRACE(ah->ah_sc); + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +/* + * Write to eeprom - currently disabled, use at your own risk + */ +static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) +{ +#if 0 + u32 status, timeout; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Initialize eeprom access + */ + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + } else { + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_RESET); + } + + /* + * Write data to data register + */ + + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_WRITE); + } + + /* + * Check status + */ + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_WRDONE) { + if (status & AR5K_EEPROM_STAT_WRERR) + return EIO; + return 0; + } + udelay(15); + } +#endif + ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); + return -EIO; +} + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret, i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna modes */ + ah->ah_antenna[mode][0] = + (ee->ee_ant_control[mode][0] << 4) | 0x1; + ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && + mode == AR5K_EEPROM_MODE_11G) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Initialize eeprom & capabilities structs + */ +static int ath5k_eeprom_init(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + unsigned int mode, i; + int ret; + u32 offset; + u16 val; + + /* Initial TX thermal adjustment values */ + ee->ee_tx_clip = 4; + ee->ee_pwd_84 = ee->ee_pwd_90 = 1; + ee->ee_gain_select = 1; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + +#ifdef notyet + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + return -EIO; + } +#endif + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + /* + * Get conformance test limit values + */ + offset = AR5K_EEPROM_CTL(ah->ah_ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); + + for (i = 0; i < ee->ee_ctls; i++) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + /* + * Get values for 802.11a (5GHz) + */ + mode = AR5K_EEPROM_MODE_11A; + + ee->ee_turbo_max_power[mode] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + } + + /* + * Get values for 802.11b (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11B; + offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + /* + * Get values for 802.11g (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11G; + offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + } + + /* + * Read 5GHz EEPROM channels + */ + + return 0; +} + +/* + * Read the MAC address from eeprom + */ +static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN]; + u32 total, offset; + u16 data; + int octet, ret; + + memset(mac, 0, ETH_ALEN); + memset(mac_d, 0, ETH_ALEN); + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + memcpy(mac, mac_d, ETH_ALEN); + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + return 0; +} + +/* + * Read/Write regulatory domain + */ +static bool ath5k_eeprom_regulation_domain(struct ath5k_hw *ah, bool write, + enum ath5k_regdom *regdomain) +{ + u16 ee_regdomain; + + /* Read current value */ + if (write != true) { + ee_regdomain = ah->ah_capabilities.cap_eeprom.ee_regdomain; + *regdomain = ath5k_regdom_to_ieee(ee_regdomain); + return true; + } + + ee_regdomain = ath5k_regdom_from_ieee(*regdomain); + + /* Try to write a new value */ + if (ah->ah_capabilities.cap_eeprom.ee_protect & + AR5K_EEPROM_PROTECT_WR_128_191) + return false; + if (ath5k_hw_eeprom_write(ah, AR5K_EEPROM_REG_DOMAIN, ee_regdomain)!=0) + return false; + + ah->ah_capabilities.cap_eeprom.ee_regdomain = ee_regdomain; + + return true; +} + +/* + * Use the above to write a new regulatory domain + */ +int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain) +{ + enum ath5k_regdom ieee_regdomain; + + ieee_regdomain = ath5k_regdom_to_ieee(regdomain); + + if (ath5k_eeprom_regulation_domain(ah, true, &ieee_regdomain) == true) + return 0; + + return -EIO; +} + +/* + * Fill the capabilities struct + */ +static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) +{ + u16 ee_header; + + ATH5K_TRACE(ah->ah_sc); + /* Capabilities stored in the EEPROM */ + ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5120; + ah->ah_capabilities.cap_range.range_5ghz_max = 5430; + ah->ah_capabilities.cap_range.range_2ghz_min = 0; + ah->ah_capabilities.cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + __set_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode); + __set_bit(MODE_ATHEROS_TURBO, ah->ah_capabilities.cap_mode); + } else { + /* + * XXX The tranceiver supports frequencies from 4920 to 6100GHz + * XXX and from 2312 to 2732GHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of range + * XXX but some regulation domains like MKK (Japan) will + * XXX support frequencies somewhere around 4.8GHz. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */ + ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + __set_bit(MODE_IEEE80211A, + ah->ah_capabilities.cap_mode); + __set_bit(MODE_ATHEROS_TURBO, + ah->ah_capabilities.cap_mode); + if (ah->ah_version == AR5K_AR5212) + __set_bit(MODE_ATHEROS_TURBOG, + ah->ah_capabilities.cap_mode); + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + AR5K_EEPROM_HDR_11G(ee_header)) { + ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */ + ah->ah_capabilities.cap_range.range_2ghz_max = 2732; + + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(MODE_IEEE80211B, + ah->ah_capabilities.cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header)) + __set_bit(MODE_IEEE80211G, + ah->ah_capabilities.cap_mode); + } + } + + /* GPIO */ + ah->ah_gpio_npins = AR5K_NUM_GPIO; + + /* Set number of supported TX queues */ + if (ah->ah_version == AR5K_AR5210) + ah->ah_capabilities.cap_queues.q_tx_num = + AR5K_NUM_TX_QUEUES_NOQCU; + else + ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + + return 0; +} + +/*********************************\ + Protocol Control Unit Functions +\*********************************/ + +/* + * Set Operation mode + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + pcu_reg = 0; + beacon_reg = 0; + + ATH5K_TRACE(ah->ah_sc); + + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_IBSS: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_ADHOC; + break; + + case IEEE80211_IF_TYPE_AP: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_AP; + break; + + case IEEE80211_IF_TYPE_STA: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case IEEE80211_IF_TYPE_MNTR: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/* + * BSSID Functions + */ + +/* + * Get station id + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/* + * Set station id + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); + + return 0; +} + +/* + * Set BSSID + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + u16 tim_offset = 0; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0xfffffff, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, 0xfffffff, AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); + + if (assoc_id == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} +/** + * ath5k_hw_set_bssid_mask - set common bits we should listen to + * + * The bssid_mask is a utility used by AR5212 hardware to inform the hardware + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode every bit matters. In AP + * mode with a single BSS every bit matters as well. In AP mode with + * multiple BSSes not every bit matters. + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * Note that this is a simple filter and *does* not filter out all + * relevant frames. Some non-relevant frames will get through, probability + * jocks are welcomed to compute. + * + * When handling multiple BSSes (or VAPs) you can get the BSSID mask by + * computing the set of: + * + * ~ ( MAC XOR BSSID ) + * + * When you do this you are essentially computing the common bits. Later it + * is assumed the harware will "and" (&) the BSSID mask with the MAC address + * to obtain the relevant bits which should match on the destination frame. + * + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + +/* + * Receive start/stop functions + */ + +/* + * Start receive on PCU + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Stop receive on PCU + */ +void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * RX Filter functions + */ + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ATH5K_TRACE(ah->ah_sc); + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/* + * Set multicast filter by index + */ +int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Clear Multicast filter by index + */ +int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Get current rx filter + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + ATH5K_TRACE(ah->ah_sc); + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/* + * Set rx filter + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA*/ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + +/* + * Beacon related functions + */ + +/* + * Get a 32bit TSF + */ +u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_TSF_L32); +} + +/* + * Get the full 64bit TSF + */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); +} + +/* + * Force a TSF reset + */ +void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); +} + +/* + * Initialize beacon timers + */ +void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + ATH5K_TRACE(ah->ah_sc); + /* + * Set the additional timers by mode + */ + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_STA: + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + break; + + default: + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << + 0x00000003; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << + 0x00000003; + } + + timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + + /* + * Set the beacon register and enable all timers. + * (next beacon, DMA beacon, software beacon, ATIM window time) + */ + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), + AR5K_BEACON); +} + +#if 0 +/* + * Set beacon timers + */ +int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, + const struct ath5k_beacon_state *state) +{ + u32 cfp_period, next_cfp, dtim, interval, next_beacon; + + /* + * TODO: should be changed through *state + * review struct ath5k_beacon_state struct + * + * XXX: These are used for cfp period bellow, are they + * ok ? Is it O.K. for tsf here to be 0 or should we use + * get_tsf ? + */ + u32 dtim_count = 0; /* XXX */ + u32 cfp_count = 0; /* XXX */ + u32 tsf = 0; /* XXX */ + + ATH5K_TRACE(ah->ah_sc); + /* Return on an invalid beacon state */ + if (state->bs_interval < 1) + return -EINVAL; + + interval = state->bs_interval; + dtim = state->bs_dtim_period; + + /* + * PCF support? + */ + if (state->bs_cfp_period > 0) { + /* + * Enable PCF mode and set the CFP + * (Contention Free Period) and timer registers + */ + cfp_period = state->bs_cfp_period * state->bs_dtim_period * + state->bs_interval; + next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * + state->bs_interval; + + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); + ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, + AR5K_CFP_DUR); + ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : + next_cfp)) << 3, AR5K_TIMER2); + } else { + /* Disable PCF mode */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + } + + /* + * Enable the beacon timer register + */ + ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); + + /* + * Start the beacon timers + */ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~ + (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | + AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, + AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, + AR5K_BEACON_PERIOD), AR5K_BEACON); + + /* + * Write new beacon miss threshold, if it appears to be valid + * XXX: Figure out right values for min <= bs_bmiss_threshold <= max + * and return if its not in range. We can test this by reading value and + * setting value to a largest value and seeing which values register. + */ + + AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, + state->bs_bmiss_threshold); + + /* + * Set sleep control register + * XXX: Didn't find this in 5210 code but since this register + * exists also in ar5k's 5210 headers i leave it as common code. + */ + AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, + (state->bs_sleep_duration - 3) << 3); + + /* + * Set enhanced sleep registers on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + if (state->bs_sleep_duration > state->bs_interval && + roundup(state->bs_sleep_duration, interval) == + state->bs_sleep_duration) + interval = state->bs_sleep_duration; + + if (state->bs_sleep_duration > dtim && (dtim == 0 || + roundup(state->bs_sleep_duration, dtim) == + state->bs_sleep_duration)) + dtim = state->bs_sleep_duration; + + if (interval > dtim) + return -EINVAL; + + next_beacon = interval == dtim ? state->bs_next_dtim : + state->bs_next_beacon; + + ath5k_hw_reg_write(ah, + AR5K_REG_SM((state->bs_next_dtim - 3) << 3, + AR5K_SLEEP0_NEXT_DTIM) | + AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | + AR5K_SLEEP0_ENH_SLEEP_EN | + AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, + AR5K_SLEEP1_NEXT_TIM) | + AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); + + ath5k_hw_reg_write(ah, + AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | + AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); + } + + return 0; +} + +/* + * Reset beacon timers + */ +void ath5k_hw_reset_beacon(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /* + * Disable beacon timer + */ + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + /* + * Disable some beacon register values + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); +} + +/* + * Wait for beacon queue to finish + */ +int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) +{ + unsigned int i; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* 5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* + * Wait for beaconn queue to finish by checking + * Control Register and Beacon Status Register. + */ + for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { + if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) + || + !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) + break; + udelay(10); + } + + /* Timeout... */ + if (i <= 0) { + /* + * Re-schedule the beacon queue + */ + ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BCR); + + return -EIO; + } + ret = 0; + } else { + /*5211/5212*/ + ret = ath5k_hw_register_timeout(ah, + AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), + AR5K_QCU_STS_FRMPENDCNT, 0, false); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) + return -EIO; + } + + return ret; +} +#endif + +/* + * Update mib counters (statistics) + */ +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, + struct ath5k_mib_stats *statistics) +{ + ATH5K_TRACE(ah->ah_sc); + /* Read-And-Clear */ + statistics->ackrcv_bad += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + statistics->rts_bad += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + statistics->rts_good += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + statistics->fcs_bad += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + statistics->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); + + /* Reset profile count registers on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + } +} + +/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: the &struct ath5k_hw + * @high: determines if to use low bit rate or now + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/* + * ACK/CTS Timeouts + */ + +/* + * Set ACK timeout on PCU + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/* + * Read the ACK timeout from PCU + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/* + * Set CTS timeout on PCU + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/* + * Read CTS timeout from PCU + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/* + * Key table (WEP) functions + */ + +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* Set NULL encryption on non-5210*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + return 0; +} + +int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* Check the validation flag at the end of the entry */ + return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & + AR5K_KEYTABLE_VALID; +} + +int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, + const struct ieee80211_key_conf *key, const u8 *mac) +{ + unsigned int i; + __le32 key_v[5] = {}; + u32 keytype; + + ATH5K_TRACE(ah->ah_sc); + + /* key->keylen comes in from mac80211 in bytes */ + + if (key->keylen > AR5K_KEYTABLE_SIZE / 8) + return -EOPNOTSUPP; + + switch (key->keylen) { + /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ + case 40 / 8: + memcpy(&key_v[0], key->key, 5); + keytype = AR5K_KEYTABLE_TYPE_40; + break; + + /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ + case 104 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 1); + keytype = AR5K_KEYTABLE_TYPE_104; + break; + /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ + case 128 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 4); + keytype = AR5K_KEYTABLE_TYPE_128; + break; + + default: + return -EINVAL; /* shouldn't happen */ + } + + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(entry, i)); + + ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); + + return ath5k_hw_set_key_lladdr(ah, entry, mac); +} + +int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Invalid entry (key table overflow) */ + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* MAC may be NULL if it's a broadcast key. In this case no need to + * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ + if (unlikely(mac == NULL)) { + low_id = 0xffffffff; + high_id = 0xffff | AR5K_KEYTABLE_VALID; + } else { + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; + } + + ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); + ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + + return 0; +} + + +/********************************************\ +Queue Control Unit, DFS Control Unit Functions +\********************************************/ + +/* + * Initialize a transmit queue + */ +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + unsigned int queue; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Get queue by type + */ + /*5210 only has 2 queues*/ + if (ah->ah_version == AR5K_AR5210) { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; + break; + default: + return -EINVAL; + } + } else { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; + ah->ah_txq[queue].tqi_type != + AR5K_TX_QUEUE_INACTIVE; queue++) { + + if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) + return -EINVAL; + } + break; + case AR5K_TX_QUEUE_UAPSD: + queue = AR5K_TX_QUEUE_ID_UAPSD; + break; + case AR5K_TX_QUEUE_BEACON: + queue = AR5K_TX_QUEUE_ID_BEACON; + break; + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_CAB; + break; + case AR5K_TX_QUEUE_XR_DATA: + if (ah->ah_version != AR5K_AR5212) + ATH5K_ERR(ah->ah_sc, + "XR data queues only supported in" + " 5212!\n"); + queue = AR5K_TX_QUEUE_ID_XR_DATA; + break; + default: + return -EINVAL; + } + } + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq[queue].tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info); + if (ret) + return ret; + } + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); + + return queue; +} + +/* + * Setup a transmit queue + */ +int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); + + /*XXX: Is this supported on 5210 ?*/ + if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && + ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || + (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || + queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) + ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/* + * Get properties for a specific transmit queue + */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/* + * Set DFS params for a transmit queue + */ +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + u32 cw_min, cw_max, retry_lg, retry_sh; + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + tq = &ah->ah_txq[queue]; + + if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return 0; + + if (ah->ah_version == AR5K_AR5210) { + /* Only handle data queues, others will be ignored */ + if (tq->tqi_type != AR5K_TX_QUEUE_DATA) + return 0; + + /* Set Slot time */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, + AR5K_SLOT_TIME); + /* Set ACK_CTS timeout */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : + AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); + /* Set Transmit Latency */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + AR5K_INIT_TRANSMIT_LATENCY_TURBO : + AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); + /* Set IFS0 */ + if (ah->ah_turbo == true) + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME_TURBO) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, + AR5K_IFS0); + else + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + AR5K_INIT_SIFS, AR5K_IFS0); + + /* Set IFS1 */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + AR5K_INIT_PROTO_TIME_CNTRL_TURBO : + AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); + /* Set PHY register 0x9844 (??) */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C, + AR5K_PHY(17)); + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, ah->ah_turbo == true ? + (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020) : + (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } + + /* + * Calculate cwmin/max by channel mode + */ + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; + ah->ah_aifs = AR5K_TUNE_AIFS; + /*XR is only supported on 5212*/ + if (IS_CHAN_XR(ah->ah_current_channel) && + ah->ah_version == AR5K_AR5212) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; + ah->ah_aifs = AR5K_TUNE_AIFS_XR; + /*B mode is not supported on 5210*/ + } else if (IS_CHAN_B(ah->ah_current_channel) && + ah->ah_version != AR5K_AR5210) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; + ah->ah_aifs = AR5K_TUNE_AIFS_11B; + } + + cw_min = 1; + while (cw_min < ah->ah_cw_min) + cw_min = (cw_min << 1) | 1; + + cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : + ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); + cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : + ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); + + /* + * Calculate and set retry limits + */ + if (ah->ah_software_retry == true) { + /* XXX Need to test this */ + retry_lg = ah->ah_limit_tx_retries; + retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? + AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; + } else { + retry_lg = AR5K_INIT_LG_RETRY; + retry_sh = AR5K_INIT_SH_RETRY; + } + + /*No QCU/DCU [5210]*/ + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, + (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + } else { + /*QCU/DCU [5211+]*/ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + + /*===Rest is also for QCU/DCU only [5211+]===*/ + + /* + * Set initial content window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, + AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set misc registers + */ + ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, + AR5K_QUEUE_MISC(queue)); + + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + if (tq->tqi_ready_time) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_TXE); + } + + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_BCN | + AR5K_QCU_MISC_BCN_ENABLE); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_POST_FR_BKOFF_DIS | + AR5K_DCU_MISC_BCN_ENABLE); + + ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - + AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + break; + + case AR5K_TX_QUEUE_CAB: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP | + AR5K_QCU_MISC_CBREXP_BCN); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; + + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP); + break; + + case AR5K_TX_QUEUE_DATA: + default: + break; + } + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + + /* Update secondary interrupt mask registers */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); + } + + return 0; +} + +/* + * Get number of pending frames + * for a specific queue [5211+] + */ +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; +} + +/* + * Set slot time + */ +int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +{ + ATH5K_TRACE(ah->ah_sc); + if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, + ah->ah_turbo), AR5K_SLOT_TIME); + else + ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); + + return 0; +} + +/* + * Get slot time + */ +unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + if (ah->ah_version == AR5K_AR5210) + return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, + AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); + else + return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; +} + + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +/* + * TX Descriptor + */ + +/* + * Initialize the 2-word tx descriptor on 5210/5211 + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, + unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_desc *tx_desc; + unsigned int buff_len; + + tx_desc = (struct ath5k_hw_2w_tx_desc *)&desc->ds_ctl0; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear status descriptor */ + memset(desc->ds_hw, 0, sizeof(struct ath5k_hw_tx_status)); + + /* Initialize control descriptor */ + tx_desc->tx_control_0 = 0; + tx_desc->tx_control_1 = 0; + + /* Setup control descriptor */ + + /* Verify and set frame length */ + if (pkt_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_desc->tx_control_0 = pkt_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + buff_len = pkt_len - FCS_LEN; + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if(type == AR5K_PKT_TYPE_BEACON) + buff_len = roundup(buff_len, 4); + + if (buff_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_desc->tx_control_1 = buff_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length + * XXX: I only found that on 5210 code, does it work on 5211 ? + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) + return -EINVAL; + tx_desc->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); + } + + /*Diferences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + default: + frame_type = type /*<< 2 ?*/; + } + + tx_desc->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + } else { + tx_desc->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_desc->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); + } +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) \ + tx_desc->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_desc->tx_control_0 |= + AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_desc->tx_control_1 |= + AR5K_REG_SM(key_index, + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_desc->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION; + + return 0; +} + +/* + * Initialize the 4-word tx descriptor on 5212 + */ +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, + enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, + unsigned int tx_tries0, unsigned int key_index, + unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate, + unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_desc *tx_desc; + struct ath5k_hw_tx_status *tx_status; + unsigned int buff_len; + + ATH5K_TRACE(ah->ah_sc); + tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0; + tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[2]; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear status descriptor */ + memset(tx_status, 0, sizeof(struct ath5k_hw_tx_status)); + + /* Initialize control descriptor */ + tx_desc->tx_control_0 = 0; + tx_desc->tx_control_1 = 0; + tx_desc->tx_control_2 = 0; + tx_desc->tx_control_3 = 0; + + /* Setup control descriptor */ + + /* Verify and set frame length */ + if (pkt_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_desc->tx_control_0 = pkt_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + buff_len = pkt_len - FCS_LEN; + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if(type == AR5K_PKT_TYPE_BEACON) + buff_len = roundup(buff_len, 4); + + if (buff_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_desc->tx_control_1 = buff_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + tx_desc->tx_control_0 |= + AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_desc->tx_control_1 |= AR5K_REG_SM(type, + AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + tx_desc->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + tx_desc->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) \ + tx_desc->tx_control_##_c |= \ + AR5K_4W_TX_DESC_CTL##_c##_##_flag + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_desc->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_desc->tx_control_1 |= AR5K_REG_SM(key_index, + AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + tx_desc->tx_control_2 |= rtscts_duration & + AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + tx_desc->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + return 0; +} + +/* + * Initialize a 4-word multirate tx descriptor on 5212 + */ +static bool +ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, + unsigned int tx_rate3, u_int tx_tries3) +{ + struct ath5k_hw_4w_tx_desc *tx_desc; + + /* + * Rates can be 0 as long as the retry count is 0 too. + * A zero rate and nonzero retry count will put the HW into a mode where + * it continously sends noise on the channel, so it is important to + * avoid this. + */ + if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || + (tx_rate2 == 0 && tx_tries2 != 0) || + (tx_rate3 == 0 && tx_tries3 != 0))) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + if (ah->ah_version == AR5K_AR5212) { + tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0; + +#define _XTX_TRIES(_n) \ + if (tx_tries##_n) { \ + tx_desc->tx_control_2 |= \ + AR5K_REG_SM(tx_tries##_n, \ + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ + tx_desc->tx_control_3 |= \ + AR5K_REG_SM(tx_rate##_n, \ + AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ + } + + _XTX_TRIES(1); + _XTX_TRIES(2); + _XTX_TRIES(3); + +#undef _XTX_TRIES + + return true; + } + + return false; +} + +/* + * Proccess the tx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc) +{ + struct ath5k_hw_tx_status *tx_status; + struct ath5k_hw_2w_tx_desc *tx_desc; + + tx_desc = (struct ath5k_hw_2w_tx_desc *)&desc->ds_ctl0; + tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[0]; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + desc->ds_us.tx.ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + desc->ds_us.tx.ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + desc->ds_us.tx.ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: desc->ds_us.tx.ts_virtcol + test*/ + desc->ds_us.tx.ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + desc->ds_us.tx.ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + desc->ds_us.tx.ts_antenna = 1; + desc->ds_us.tx.ts_status = 0; + desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_0, + AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + desc->ds_us.tx.ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + desc->ds_us.tx.ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + desc->ds_us.tx.ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * Proccess a tx descriptor on 5212 + */ +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc) +{ + struct ath5k_hw_tx_status *tx_status; + struct ath5k_hw_4w_tx_desc *tx_desc; + + ATH5K_TRACE(ah->ah_sc); + tx_desc = (struct ath5k_hw_4w_tx_desc *)&desc->ds_ctl0; + tx_status = (struct ath5k_hw_tx_status *)&desc->ds_hw[2]; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + desc->ds_us.tx.ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + desc->ds_us.tx.ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + desc->ds_us.tx.ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + desc->ds_us.tx.ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + desc->ds_us.tx.ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + desc->ds_us.tx.ts_antenna = (tx_status->tx_status_1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; + desc->ds_us.tx.ts_status = 0; + + switch (AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { + case 0: + desc->ds_us.tx.ts_rate = tx_desc->tx_control_3 & + AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + break; + case 1: + desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); + desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); + break; + case 2: + desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); + desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); + break; + case 3: + desc->ds_us.tx.ts_rate = AR5K_REG_MS(tx_desc->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); + desc->ds_us.tx.ts_longretry +=AR5K_REG_MS(tx_desc->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); + break; + } + + if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + desc->ds_us.tx.ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + desc->ds_us.tx.ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + desc->ds_us.tx.ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * RX Descriptor + */ + +/* + * Initialize an rx descriptor + */ +int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_rx_desc *rx_desc; + + ATH5K_TRACE(ah->ah_sc); + rx_desc = (struct ath5k_rx_desc *)&desc->ds_ctl0; + + /* + *Clear ds_hw + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(desc->ds_hw, 0, sizeof(desc->ds_hw)); + + /*Initialize rx descriptor*/ + rx_desc->rx_control_0 = 0; + rx_desc->rx_control_1 = 0; + + /* Setup descriptor */ + rx_desc->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + if (unlikely(rx_desc->rx_control_1 != size)) + return -EINVAL; + + if (flags & AR5K_RXDESC_INTREQ) + rx_desc->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/* + * Proccess the rx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_old_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc) +{ + struct ath5k_hw_old_rx_status *rx_status; + + rx_status = (struct ath5k_hw_old_rx_status *)&desc->ds_hw[0]; + + /* No frame received / not ready */ + if (unlikely((rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_DONE) + == 0)) + return -EINPROGRESS; + + /* + * Frame receive status + */ + desc->ds_us.rx.rs_datalen = rx_status->rx_status_0 & + AR5K_OLD_RX_DESC_STATUS0_DATA_LEN; + desc->ds_us.rx.rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL); + desc->ds_us.rx.rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE); + desc->ds_us.rx.rs_antenna = rx_status->rx_status_0 & + AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA; + desc->ds_us.rx.rs_more = rx_status->rx_status_0 & + AR5K_OLD_RX_DESC_STATUS0_MORE; + desc->ds_us.rx.rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + desc->ds_us.rx.rs_status = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_VALID) + desc->ds_us.rx.rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX); + else + desc->ds_us.rx.rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if ((rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_FRAME_RECEIVE_OK) + == 0) { + if (rx_status->rx_status_1 & AR5K_OLD_RX_DESC_STATUS1_CRC_ERROR) + desc->ds_us.rx.rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_OLD_RX_DESC_STATUS1_FIFO_OVERRUN) + desc->ds_us.rx.rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR) { + desc->ds_us.rx.rs_status |= AR5K_RXERR_PHY; + desc->ds_us.rx.rs_phyerr = + AR5K_REG_MS(rx_status->rx_status_1, + AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_OLD_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + desc->ds_us.rx.rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/* + * Proccess the rx status descriptor on 5212 + */ +static int ath5k_hw_proc_new_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc) +{ + struct ath5k_hw_new_rx_status *rx_status; + struct ath5k_hw_rx_error *rx_err; + + ATH5K_TRACE(ah->ah_sc); + rx_status = (struct ath5k_hw_new_rx_status *)&desc->ds_hw[0]; + + /* Overlay on error */ + rx_err = (struct ath5k_hw_rx_error *)&desc->ds_hw[0]; + + /* No frame received / not ready */ + if (unlikely((rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_DONE) + == 0)) + return -EINPROGRESS; + + /* + * Frame receive status + */ + desc->ds_us.rx.rs_datalen = rx_status->rx_status_0 & + AR5K_NEW_RX_DESC_STATUS0_DATA_LEN; + desc->ds_us.rx.rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL); + desc->ds_us.rx.rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE); + desc->ds_us.rx.rs_antenna = rx_status->rx_status_0 & + AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA; + desc->ds_us.rx.rs_more = rx_status->rx_status_0 & + AR5K_NEW_RX_DESC_STATUS0_MORE; + desc->ds_us.rx.rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + desc->ds_us.rx.rs_status = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_VALID) + desc->ds_us.rx.rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX); + else + desc->ds_us.rx.rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if ((rx_status->rx_status_1 & + AR5K_NEW_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { + if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_CRC_ERROR) + desc->ds_us.rx.rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_NEW_RX_DESC_STATUS1_PHY_ERROR) { + desc->ds_us.rx.rs_status |= AR5K_RXERR_PHY; + desc->ds_us.rx.rs_phyerr = + AR5K_REG_MS(rx_err->rx_error_1, + AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + } + + if (rx_status->rx_status_1 & + AR5K_NEW_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + desc->ds_us.rx.rs_status |= AR5K_RXERR_DECRYPT; + + if (rx_status->rx_status_1 & AR5K_NEW_RX_DESC_STATUS1_MIC_ERROR) + desc->ds_us.rx.rs_status |= AR5K_RXERR_MIC; + } + + return 0; +} + + +/****************\ + GPIO Functions +\****************/ + +/* + * Set led state + */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + ATH5K_TRACE(ah->ah_sc); + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/* + * Set GPIO outputs + */ +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ + AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Set GPIO inputs + */ +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ + AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Get GPIO state + */ +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/* + * Set GPIO state + */ +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + ATH5K_TRACE(ah->ah_sc); + + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/* + * Initialize the GPIO interrupt (RFKill switch) + */ +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + + +/*********************************\ + Regulatory Domain/Channels Setup +\*********************************/ + +u16 ath5k_get_regdomain(struct ath5k_hw *ah) +{ + u16 regdomain; + enum ath5k_regdom ieee_regdomain; +#ifdef COUNTRYCODE + u16 code; +#endif + + ath5k_eeprom_regulation_domain(ah, false, &ieee_regdomain); + ah->ah_capabilities.cap_regdomain.reg_hw = ieee_regdomain; + +#ifdef COUNTRYCODE + /* + * Get the regulation domain by country code. This will ignore + * the settings found in the EEPROM. + */ + code = ieee80211_name2countrycode(COUNTRYCODE); + ieee_regdomain = ieee80211_countrycode2regdomain(code); +#endif + + regdomain = ath5k_regdom_from_ieee(ieee_regdomain); + ah->ah_capabilities.cap_regdomain.reg_current = regdomain; + + return regdomain; +} + + +/****************\ + Misc functions +\****************/ + +int ath5k_hw_get_capability(struct ath5k_hw *ah, + enum ath5k_capability_type cap_type, + u32 capability, u32 *result) +{ + ATH5K_TRACE(ah->ah_sc); + + switch (cap_type) { + case AR5K_CAP_NUM_TXQUEUES: + if (result) { + if (ah->ah_version == AR5K_AR5210) + *result = AR5K_NUM_TX_QUEUES_NOQCU; + else + *result = AR5K_NUM_TX_QUEUES; + goto yes; + } + case AR5K_CAP_VEOL: + goto yes; + case AR5K_CAP_COMPRESSION: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_BURST: + goto yes; + case AR5K_CAP_TPC: + goto yes; + case AR5K_CAP_BSSIDMASK: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_XR: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + default: + goto no; + } + +no: + return -EINVAL; +yes: + return 0; +} + +static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, + u16 assoc_id) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} + +static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/hw.h new file mode 100644 index 000000000000..d9a7c0973f53 --- /dev/null +++ b/drivers/net/wireless/ath5k/hw.h @@ -0,0 +1,588 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/delay.h> + +/* + * Gain settings + */ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 +#define AR5K_GAIN_PARAM_TX_CLIP 0 +#define AR5K_GAIN_PARAM_PD_90 1 +#define AR5K_GAIN_PARAM_PD_84 2 +#define AR5K_GAIN_PARAM_GAIN_SEL 3 +#define AR5K_GAIN_PARAM_MIX_ORN 0 +#define AR5K_GAIN_PARAM_PD_138 1 +#define AR5K_GAIN_PARAM_PD_137 2 +#define AR5K_GAIN_PARAM_PD_136 3 +#define AR5K_GAIN_PARAM_PD_132 4 +#define AR5K_GAIN_PARAM_PD_131 5 +#define AR5K_GAIN_PARAM_PD_130 6 +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +struct ath5k_gain_opt_step { + s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s32 gos_gain; +}; + +struct ath5k_gain { + u32 g_step_idx; + u32 g_current; + u32 g_target; + u32 g_low; + u32 g_high; + u32 g_f_corr; + u32 g_active; + const struct ath5k_gain_opt_step *g_step; +}; + + +/* + * HW SPECIFIC STRUCTS + */ + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 + +/* Struct to hold EEPROM calibration data */ +struct ath5k_eeprom_info { + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* Used for tx thermal adjustment (eeprom_init, rfregs) */ + u16 ee_tx_clip; + u16 ee_pwd_84; + u16 ee_pwd_90; + u16 ee_gain_select; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + + /* Unused */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; + u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ + + /* Conformance test limits (Unused) */ + u16 ee_ctls; + u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; +}; + +/* + * Internal RX/TX descriptor structures + * (rX: reserved fields possibily used by future versions of the ar5k chipset) + */ + +struct ath5k_rx_desc { + u32 rx_control_0; /* RX control word 0 */ + +#define AR5K_DESC_RX_CTL0 0x00000000 + + u32 rx_control_1; /* RX control word 1 */ + +#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff +#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 +} __packed; + +/* + * 5210/5211 rx status descriptor + */ +struct ath5k_hw_old_rx_status { + u32 rx_status_0; /* RX status word 0 */ + +#define AR5K_OLD_RX_DESC_STATUS0_DATA_LEN 0x00000fff +#define AR5K_OLD_RX_DESC_STATUS0_MORE 0x00001000 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 +#define AR5K_OLD_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 + + u32 rx_status_1; /* RX status word 1 */ + +#define AR5K_OLD_RX_DESC_STATUS1_DONE 0x00000001 +#define AR5K_OLD_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 +#define AR5K_OLD_RX_DESC_STATUS1_CRC_ERROR 0x00000004 +#define AR5K_OLD_RX_DESC_STATUS1_FIFO_OVERRUN 0x00000008 +#define AR5K_OLD_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 +#define AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 +#define AR5K_OLD_RX_DESC_STATUS1_PHY_ERROR_S 5 +#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 +#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 +#define AR5K_OLD_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 +#define AR5K_OLD_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 +#define AR5K_OLD_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 +} __packed; + +/* + * 5212 rx status descriptor + */ +struct ath5k_hw_new_rx_status { + u32 rx_status_0; /* RX status word 0 */ + +#define AR5K_NEW_RX_DESC_STATUS0_DATA_LEN 0x00000fff +#define AR5K_NEW_RX_DESC_STATUS0_MORE 0x00001000 +#define AR5K_NEW_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 +#define AR5K_NEW_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + + u32 rx_status_1; /* RX status word 1 */ + +#define AR5K_NEW_RX_DESC_STATUS1_DONE 0x00000001 +#define AR5K_NEW_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 +#define AR5K_NEW_RX_DESC_STATUS1_CRC_ERROR 0x00000004 +#define AR5K_NEW_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008 +#define AR5K_NEW_RX_DESC_STATUS1_PHY_ERROR 0x00000010 +#define AR5K_NEW_RX_DESC_STATUS1_MIC_ERROR 0x00000020 +#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 +#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00 +#define AR5K_NEW_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000 +#define AR5K_NEW_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16 +#define AR5K_NEW_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000 +} __packed; + +struct ath5k_hw_rx_error { + u32 rx_error_0; /* RX error word 0 */ + +#define AR5K_RX_DESC_ERROR0 0x00000000 + + u32 rx_error_1; /* RX error word 1 */ + +#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 +#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 +} __packed; + +#define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 +#define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 +#define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 +#define AR5K_DESC_RX_PHY_ERROR_RATE 0x60 +#define AR5K_DESC_RX_PHY_ERROR_LENGTH 0x80 +#define AR5K_DESC_RX_PHY_ERROR_64QAM 0xa0 +#define AR5K_DESC_RX_PHY_ERROR_SERVICE 0xc0 +#define AR5K_DESC_RX_PHY_ERROR_TRANSMITOVR 0xe0 + +struct ath5k_hw_2w_tx_desc { + u32 tx_control_0; /* TX control word 0 */ + +#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000 +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18 +#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000 +#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000 +#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET 0x00800000 /*[5210]*/ +#define AR5K_2W_TX_DESC_CTL0_VEOL 0x00800000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE 0x1c000000 /*[5210]*/ +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 +#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 + + u32 tx_control_1; /* TX control word 1 */ + +#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff +#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 +#define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ +} __packed; + +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 0x0c +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 0x10 + +/* + * 5212 4-word tx control descriptor + */ +struct ath5k_hw_4w_tx_desc { + u32 tx_control_0; /* TX control word 0 */ + +#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000 +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16 +#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000 +#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000 +#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000 +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000 +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000 +#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 +#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000 + + u32 tx_control_1; /* TX control word 1 */ + +#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff +#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000 +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX 0x000fe000 +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000 +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20 +#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25 +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27 +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29 + + u32 tx_control_2; /* TX control word 2 */ + +#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff +#define AR5K_4W_TX_DESC_CTL2_DURATION_UPDATE_ENABLE 0x00008000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28 + + u32 tx_control_3; /* TX control word 3 */ + +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15 +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 +} __packed; + +/* + * Common tx status descriptor + */ +struct ath5k_hw_tx_status { + u32 tx_status_0; /* TX status word 0 */ + +#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 +#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 +#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 +#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008 +/*??? +#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT 0x000000f0 +#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT_S 4 +*/ +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0 +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4 +/*??? +#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT 0x00000f00 +#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT_S 8 +*/ +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00 +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8 +#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT 0x0000f000 +#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT_S 12 +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 + + u32 tx_status_1; /* TX status word 1 */ + +#define AR5K_DESC_TX_STATUS1_DONE 0x00000001 +#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe +#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000 +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13 +#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX 0x00600000 +#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 +#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 +#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 +} __packed; + + +/* + * AR5K REGISTER ACCESS + */ + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/*#define AR5K_REG_READ(_reg) ath5k_hw_reg_read(ah, _reg) + +#define AR5K_REG_WRITE(_reg, _val) ath5k_hw_reg_write(ah, _val, _reg)*/ + +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +#define AR5K_EEPROM_READ(_o, _v) do { \ + if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \ + return (ret); \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +/* Read status of selected queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +/* + * Initial register values + */ + +/* + * Common initial register values + */ +#define AR5K_INIT_MODE CHANNEL_B + +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_CARR_SENSE_EN 1 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 +#define AR5K_INIT_TOPS 8 +#define AR5K_INIT_RXNOFRM 8 +#define AR5K_INIT_RPGTO 0 +#define AR5K_INIT_TXNOFRM 0 +#define AR5K_INIT_BEACON_PERIOD 65535 +#define AR5K_INIT_TIM_OFFSET 0 +#define AR5K_INIT_BEACON_EN 0 +#define AR5K_INIT_RESET_TSF 0 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) +#define AR5K_INIT_BEACON_CONTROL ( \ + (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) | \ + (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD) \ +) + +/* + * Non-common initial register values which have to be loaded into the + * card at boot time and after each reset. + */ + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS +#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c new file mode 100644 index 000000000000..2c22f1d4ee64 --- /dev/null +++ b/drivers/net/wireless/ath5k/initvals.c @@ -0,0 +1,1347 @@ +/* + * Initial register settings functions + * + * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "ath5k.h" +#include "base.h" +#include "reg.h" + +/* + * MAC/PHY REGISTERS + */ + + +/* + * Mode-independent initial register writes + */ + +struct ath5k_ini { + u16 ini_register; + u32 ini_value; + + enum { + AR5K_INI_WRITE = 0, /* Default */ + AR5K_INI_READ = 1, /* Cleared on read */ + } ini_mode; +}; + +/* + * Mode specific initial register values + */ + +struct ath5k_ini_mode { + u16 mode_register; + u32 mode_value[5]; +}; + +/* Initial register settings for AR5210 */ +static const struct ath5k_ini ar5210_ini[] = { + /* PCU and MAC registers */ + { AR5K_NOQCU_TXDP0, 0 }, + { AR5K_NOQCU_TXDP1, 0 }, + { AR5K_RXDP, 0 }, + { AR5K_CR, 0 }, + { AR5K_ISR, 0, AR5K_INI_READ }, + { AR5K_IMR, 0 }, + { AR5K_IER, AR5K_IER_DISABLE }, + { AR5K_BSR, 0, AR5K_INI_READ }, + { AR5K_TXCFG, AR5K_DMASIZE_128B }, + { AR5K_RXCFG, AR5K_DMASIZE_128B }, + { AR5K_CFG, AR5K_INIT_CFG }, + { AR5K_TOPS, AR5K_INIT_TOPS }, + { AR5K_RXNOFRM, AR5K_INIT_RXNOFRM }, + { AR5K_RPGTO, AR5K_INIT_RPGTO }, + { AR5K_TXNOFRM, AR5K_INIT_TXNOFRM }, + { AR5K_SFR, 0 }, + { AR5K_MIBC, 0 }, + { AR5K_MISC, 0 }, + { AR5K_RX_FILTER_5210, 0 }, + { AR5K_MCAST_FILTER0_5210, 0 }, + { AR5K_MCAST_FILTER1_5210, 0 }, + { AR5K_TX_MASK0, 0 }, + { AR5K_TX_MASK1, 0 }, + { AR5K_CLR_TMASK, 0 }, + { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES }, + { AR5K_DIAG_SW_5210, 0 }, + { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES }, + { AR5K_TSF_L32_5210, 0 }, + { AR5K_TIMER0_5210, 0 }, + { AR5K_TIMER1_5210, 0xffffffff }, + { AR5K_TIMER2_5210, 0xffffffff }, + { AR5K_TIMER3_5210, 1 }, + { AR5K_CFP_DUR_5210, 0 }, + { AR5K_CFP_PERIOD_5210, 0 }, + /* PHY registers */ + { AR5K_PHY(0), 0x00000047 }, + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY(3), 0x09848ea6 }, + { AR5K_PHY(4), 0x3d32e000 }, + { AR5K_PHY(5), 0x0000076b }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE }, + { AR5K_PHY(8), 0x02020200 }, + { AR5K_PHY(9), 0x00000e0e }, + { AR5K_PHY(10), 0x0a020201 }, + { AR5K_PHY(11), 0x00036ffc }, + { AR5K_PHY(12), 0x00000000 }, + { AR5K_PHY(13), 0x00000e0e }, + { AR5K_PHY(14), 0x00000007 }, + { AR5K_PHY(15), 0x00020100 }, + { AR5K_PHY(16), 0x89630000 }, + { AR5K_PHY(17), 0x1372169c }, + { AR5K_PHY(18), 0x0018b633 }, + { AR5K_PHY(19), 0x1284613c }, + { AR5K_PHY(20), 0x0de8b8e0 }, + { AR5K_PHY(21), 0x00074859 }, + { AR5K_PHY(22), 0x7e80beba }, + { AR5K_PHY(23), 0x313a665e }, + { AR5K_PHY_AGCCTL, 0x00001d08 }, + { AR5K_PHY(25), 0x0001ce00 }, + { AR5K_PHY(26), 0x409a4190 }, + { AR5K_PHY(28), 0x0000000f }, + { AR5K_PHY(29), 0x00000080 }, + { AR5K_PHY(30), 0x00000004 }, + { AR5K_PHY(31), 0x00000018 }, /* 0x987c */ + { AR5K_PHY(64), 0x00000000 }, /* 0x9900 */ + { AR5K_PHY(65), 0x00000000 }, + { AR5K_PHY(66), 0x00000000 }, + { AR5K_PHY(67), 0x00800000 }, + { AR5K_PHY(68), 0x00000003 }, + /* BB gain table (64bytes) */ + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000020 }, + { AR5K_BB_GAIN(2), 0x00000010 }, + { AR5K_BB_GAIN(3), 0x00000030 }, + { AR5K_BB_GAIN(4), 0x00000008 }, + { AR5K_BB_GAIN(5), 0x00000028 }, + { AR5K_BB_GAIN(6), 0x00000028 }, + { AR5K_BB_GAIN(7), 0x00000004 }, + { AR5K_BB_GAIN(8), 0x00000024 }, + { AR5K_BB_GAIN(9), 0x00000014 }, + { AR5K_BB_GAIN(10), 0x00000034 }, + { AR5K_BB_GAIN(11), 0x0000000c }, + { AR5K_BB_GAIN(12), 0x0000002c }, + { AR5K_BB_GAIN(13), 0x00000002 }, + { AR5K_BB_GAIN(14), 0x00000022 }, + { AR5K_BB_GAIN(15), 0x00000012 }, + { AR5K_BB_GAIN(16), 0x00000032 }, + { AR5K_BB_GAIN(17), 0x0000000a }, + { AR5K_BB_GAIN(18), 0x0000002a }, + { AR5K_BB_GAIN(19), 0x00000001 }, + { AR5K_BB_GAIN(20), 0x00000021 }, + { AR5K_BB_GAIN(21), 0x00000011 }, + { AR5K_BB_GAIN(22), 0x00000031 }, + { AR5K_BB_GAIN(23), 0x00000009 }, + { AR5K_BB_GAIN(24), 0x00000029 }, + { AR5K_BB_GAIN(25), 0x00000005 }, + { AR5K_BB_GAIN(26), 0x00000025 }, + { AR5K_BB_GAIN(27), 0x00000015 }, + { AR5K_BB_GAIN(28), 0x00000035 }, + { AR5K_BB_GAIN(29), 0x0000000d }, + { AR5K_BB_GAIN(30), 0x0000002d }, + { AR5K_BB_GAIN(31), 0x00000003 }, + { AR5K_BB_GAIN(32), 0x00000023 }, + { AR5K_BB_GAIN(33), 0x00000013 }, + { AR5K_BB_GAIN(34), 0x00000033 }, + { AR5K_BB_GAIN(35), 0x0000000b }, + { AR5K_BB_GAIN(36), 0x0000002b }, + { AR5K_BB_GAIN(37), 0x00000007 }, + { AR5K_BB_GAIN(38), 0x00000027 }, + { AR5K_BB_GAIN(39), 0x00000017 }, + { AR5K_BB_GAIN(40), 0x00000037 }, + { AR5K_BB_GAIN(41), 0x0000000f }, + { AR5K_BB_GAIN(42), 0x0000002f }, + { AR5K_BB_GAIN(43), 0x0000002f }, + { AR5K_BB_GAIN(44), 0x0000002f }, + { AR5K_BB_GAIN(45), 0x0000002f }, + { AR5K_BB_GAIN(46), 0x0000002f }, + { AR5K_BB_GAIN(47), 0x0000002f }, + { AR5K_BB_GAIN(48), 0x0000002f }, + { AR5K_BB_GAIN(49), 0x0000002f }, + { AR5K_BB_GAIN(50), 0x0000002f }, + { AR5K_BB_GAIN(51), 0x0000002f }, + { AR5K_BB_GAIN(52), 0x0000002f }, + { AR5K_BB_GAIN(53), 0x0000002f }, + { AR5K_BB_GAIN(54), 0x0000002f }, + { AR5K_BB_GAIN(55), 0x0000002f }, + { AR5K_BB_GAIN(56), 0x0000002f }, + { AR5K_BB_GAIN(57), 0x0000002f }, + { AR5K_BB_GAIN(58), 0x0000002f }, + { AR5K_BB_GAIN(59), 0x0000002f }, + { AR5K_BB_GAIN(60), 0x0000002f }, + { AR5K_BB_GAIN(61), 0x0000002f }, + { AR5K_BB_GAIN(62), 0x0000002f }, + { AR5K_BB_GAIN(63), 0x0000002f }, + /* 5110 RF gain table (64btes) */ + { AR5K_RF_GAIN(0), 0x0000001d }, + { AR5K_RF_GAIN(1), 0x0000005d }, + { AR5K_RF_GAIN(2), 0x0000009d }, + { AR5K_RF_GAIN(3), 0x000000dd }, + { AR5K_RF_GAIN(4), 0x0000011d }, + { AR5K_RF_GAIN(5), 0x00000021 }, + { AR5K_RF_GAIN(6), 0x00000061 }, + { AR5K_RF_GAIN(7), 0x000000a1 }, + { AR5K_RF_GAIN(8), 0x000000e1 }, + { AR5K_RF_GAIN(9), 0x00000031 }, + { AR5K_RF_GAIN(10), 0x00000071 }, + { AR5K_RF_GAIN(11), 0x000000b1 }, + { AR5K_RF_GAIN(12), 0x0000001c }, + { AR5K_RF_GAIN(13), 0x0000005c }, + { AR5K_RF_GAIN(14), 0x00000029 }, + { AR5K_RF_GAIN(15), 0x00000069 }, + { AR5K_RF_GAIN(16), 0x000000a9 }, + { AR5K_RF_GAIN(17), 0x00000020 }, + { AR5K_RF_GAIN(18), 0x00000019 }, + { AR5K_RF_GAIN(19), 0x00000059 }, + { AR5K_RF_GAIN(20), 0x00000099 }, + { AR5K_RF_GAIN(21), 0x00000030 }, + { AR5K_RF_GAIN(22), 0x00000005 }, + { AR5K_RF_GAIN(23), 0x00000025 }, + { AR5K_RF_GAIN(24), 0x00000065 }, + { AR5K_RF_GAIN(25), 0x000000a5 }, + { AR5K_RF_GAIN(26), 0x00000028 }, + { AR5K_RF_GAIN(27), 0x00000068 }, + { AR5K_RF_GAIN(28), 0x0000001f }, + { AR5K_RF_GAIN(29), 0x0000001e }, + { AR5K_RF_GAIN(30), 0x00000018 }, + { AR5K_RF_GAIN(31), 0x00000058 }, + { AR5K_RF_GAIN(32), 0x00000098 }, + { AR5K_RF_GAIN(33), 0x00000003 }, + { AR5K_RF_GAIN(34), 0x00000004 }, + { AR5K_RF_GAIN(35), 0x00000044 }, + { AR5K_RF_GAIN(36), 0x00000084 }, + { AR5K_RF_GAIN(37), 0x00000013 }, + { AR5K_RF_GAIN(38), 0x00000012 }, + { AR5K_RF_GAIN(39), 0x00000052 }, + { AR5K_RF_GAIN(40), 0x00000092 }, + { AR5K_RF_GAIN(41), 0x000000d2 }, + { AR5K_RF_GAIN(42), 0x0000002b }, + { AR5K_RF_GAIN(43), 0x0000002a }, + { AR5K_RF_GAIN(44), 0x0000006a }, + { AR5K_RF_GAIN(45), 0x000000aa }, + { AR5K_RF_GAIN(46), 0x0000001b }, + { AR5K_RF_GAIN(47), 0x0000001a }, + { AR5K_RF_GAIN(48), 0x0000005a }, + { AR5K_RF_GAIN(49), 0x0000009a }, + { AR5K_RF_GAIN(50), 0x000000da }, + { AR5K_RF_GAIN(51), 0x00000006 }, + { AR5K_RF_GAIN(52), 0x00000006 }, + { AR5K_RF_GAIN(53), 0x00000006 }, + { AR5K_RF_GAIN(54), 0x00000006 }, + { AR5K_RF_GAIN(55), 0x00000006 }, + { AR5K_RF_GAIN(56), 0x00000006 }, + { AR5K_RF_GAIN(57), 0x00000006 }, + { AR5K_RF_GAIN(58), 0x00000006 }, + { AR5K_RF_GAIN(59), 0x00000006 }, + { AR5K_RF_GAIN(60), 0x00000006 }, + { AR5K_RF_GAIN(61), 0x00000006 }, + { AR5K_RF_GAIN(62), 0x00000006 }, + { AR5K_RF_GAIN(63), 0x00000006 }, + /* PHY activation */ + { AR5K_PHY(53), 0x00000020 }, + { AR5K_PHY(51), 0x00000004 }, + { AR5K_PHY(50), 0x00060106 }, + { AR5K_PHY(39), 0x0000006d }, + { AR5K_PHY(48), 0x00000000 }, + { AR5K_PHY(52), 0x00000014 }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE }, +}; + +/* Initial register settings for AR5211 */ +static const struct ath5k_ini ar5211_ini[] = { + { AR5K_RXDP, 0x00000000 }, + { AR5K_RTSD0, 0x84849c9c }, + { AR5K_RTSD1, 0x7c7c7c7c }, + { AR5K_RXCFG, 0x00000005 }, + { AR5K_MIBC, 0x00000000 }, + { AR5K_TOPS, 0x00000008 }, + { AR5K_RXNOFRM, 0x00000008 }, + { AR5K_TXNOFRM, 0x00000010 }, + { AR5K_RPGTO, 0x00000000 }, + { AR5K_RFCNT, 0x0000001f }, + { AR5K_QUEUE_TXDP(0), 0x00000000 }, + { AR5K_QUEUE_TXDP(1), 0x00000000 }, + { AR5K_QUEUE_TXDP(2), 0x00000000 }, + { AR5K_QUEUE_TXDP(3), 0x00000000 }, + { AR5K_QUEUE_TXDP(4), 0x00000000 }, + { AR5K_QUEUE_TXDP(5), 0x00000000 }, + { AR5K_QUEUE_TXDP(6), 0x00000000 }, + { AR5K_QUEUE_TXDP(7), 0x00000000 }, + { AR5K_QUEUE_TXDP(8), 0x00000000 }, + { AR5K_QUEUE_TXDP(9), 0x00000000 }, + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_STA_ID1, 0x00000000 }, + { AR5K_BSS_ID0, 0x00000000 }, + { AR5K_BSS_ID1, 0x00000000 }, + { AR5K_RSSI_THR, 0x00000000 }, + { AR5K_CFP_PERIOD_5211, 0x00000000 }, + { AR5K_TIMER0_5211, 0x00000030 }, + { AR5K_TIMER1_5211, 0x0007ffff }, + { AR5K_TIMER2_5211, 0x01ffffff }, + { AR5K_TIMER3_5211, 0x00000031 }, + { AR5K_CFP_DUR_5211, 0x00000000 }, + { AR5K_RX_FILTER_5211, 0x00000000 }, + { AR5K_MCAST_FILTER0_5211, 0x00000000 }, + { AR5K_MCAST_FILTER1_5211, 0x00000002 }, + { AR5K_DIAG_SW_5211, 0x00000000 }, + { AR5K_ADDAC_TEST, 0x00000000 }, + { AR5K_DEFAULT_ANTENNA, 0x00000000 }, + /* PHY registers */ + { AR5K_PHY_AGC, 0x00000000 }, + { AR5K_PHY(3), 0x2d849093 }, + { AR5K_PHY(4), 0x7d32e000 }, + { AR5K_PHY(5), 0x00000f6b }, + { AR5K_PHY_ACT, 0x00000000 }, + { AR5K_PHY(11), 0x00026ffe }, + { AR5K_PHY(12), 0x00000000 }, + { AR5K_PHY(15), 0x00020100 }, + { AR5K_PHY(16), 0x206a017a }, + { AR5K_PHY(19), 0x1284613c }, + { AR5K_PHY(21), 0x00000859 }, + { AR5K_PHY(26), 0x409a4190 }, /* 0x9868 */ + { AR5K_PHY(27), 0x050cb081 }, + { AR5K_PHY(28), 0x0000000f }, + { AR5K_PHY(29), 0x00000080 }, + { AR5K_PHY(30), 0x0000000c }, + { AR5K_PHY(64), 0x00000000 }, + { AR5K_PHY(65), 0x00000000 }, + { AR5K_PHY(66), 0x00000000 }, + { AR5K_PHY(67), 0x00800000 }, + { AR5K_PHY(68), 0x00000001 }, + { AR5K_PHY(71), 0x0000092a }, + { AR5K_PHY_IQ, 0x00000000 }, + { AR5K_PHY(73), 0x00058a05 }, + { AR5K_PHY(74), 0x00000001 }, + { AR5K_PHY(75), 0x00000000 }, + { AR5K_PHY_PAPD_PROBE, 0x00000000 }, + { AR5K_PHY(77), 0x00000000 }, /* 0x9934 */ + { AR5K_PHY(78), 0x00000000 }, /* 0x9938 */ + { AR5K_PHY(79), 0x0000003f }, /* 0x993c */ + { AR5K_PHY(80), 0x00000004 }, + { AR5K_PHY(82), 0x00000000 }, + { AR5K_PHY(83), 0x00000000 }, + { AR5K_PHY(84), 0x00000000 }, + { AR5K_PHY_RADAR, 0x5d50f14c }, + { AR5K_PHY(86), 0x00000018 }, + { AR5K_PHY(87), 0x004b6a8e }, + /* Initial Power table (32bytes) + * common on all cards/modes. + * Note: Table is rewritten during + * txpower setup later using calibration + * data etc. so next write is non-common + { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff }, + { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff }, + { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff }, + { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff }, + { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff }, + { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff }, + { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff }, + { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff }, + { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff }, + { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff }, + { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff }, + { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff }, + { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff }, + { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff }, + { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff }, + { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff }, + { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff }, + { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff }, + { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff }, + { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff }, + { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff }, + { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff },*/ + { AR5K_PHY_CCKTXCTL, 0x00000000 }, + { AR5K_PHY(642), 0x503e4646 }, + { AR5K_PHY_GAIN_2GHZ, 0x6480416c }, + { AR5K_PHY(644), 0x0199a003 }, + { AR5K_PHY(645), 0x044cd610 }, + { AR5K_PHY(646), 0x13800040 }, + { AR5K_PHY(647), 0x1be00060 }, + { AR5K_PHY(648), 0x0c53800a }, + { AR5K_PHY(649), 0x0014df3b }, + { AR5K_PHY(650), 0x000001b5 }, + { AR5K_PHY(651), 0x00000020 }, +}; + +/* Initial mode-specific settings for AR5211 + * XXX: how about g / gTurbo ? RF5111 supports it, how about AR5211 ? + * Maybe 5211 supports OFDM-only g but we need to test it ! + */ +static const struct ath5k_ini_mode ar5211_ini_mode[] = { + { AR5K_TXCFG, + /* a aTurbo b */ + { 0x00000015, 0x00000015, 0x0000001d } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001e0, 0x000001b8 } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000001e0, 0x000000b0 } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000d98, 0x00001180, 0x00001f48 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00014068, 0x00005880 } }, + { AR5K_TIME_OUT, + { 0x04000400, 0x08000800, 0x20003000 } }, + { AR5K_USEC_5211, + { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95 } }, + { AR5K_PHY_TURBO, + { 0x00000000, 0x00000003, 0x00000000 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02020200, 0x02010200 } }, + { AR5K_PHY(9), + { 0x00000e0e, 0x00000e0e, 0x00000707 } }, + { AR5K_PHY(10), + { 0x0a020001, 0x0a020001, 0x05010000 } }, + { AR5K_PHY(13), + { 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(14), + { 0x00000007, 0x00000007, 0x0000000b } }, + { AR5K_PHY(17), + { 0x1372169c, 0x137216a5, 0x137216a8 } }, + { AR5K_PHY(18), + { 0x0018ba67, 0x0018ba67, 0x0018ba69 } }, + { AR5K_PHY(20), + { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x31375d5e, 0x31375d5e, 0x313a5d5e } }, + { AR5K_PHY_AGCCTL, + { 0x0000bd10, 0x0000bd10, 0x0000bd38 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x00002710, 0x0000157c } }, + { AR5K_PHY(70), + { 0x00000190, 0x00000190, 0x00000084 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0x6fe01020, 0x6fe01020, 0x6fe00920 } }, + { AR5K_PHY_PCDAC_TXPOWER_BASE_5211, + { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff } }, + { AR5K_RF_BUFFER_CONTROL_4, + { 0x00000010, 0x00000014, 0x00000010 } }, +}; + +/* Initial register settings for AR5212 */ +static const struct ath5k_ini ar5212_ini[] = { + { AR5K_RXDP, 0x00000000 }, + { AR5K_RXCFG, 0x00000005 }, + { AR5K_MIBC, 0x00000000 }, + { AR5K_TOPS, 0x00000008 }, + { AR5K_RXNOFRM, 0x00000008 }, + { AR5K_TXNOFRM, 0x00000010 }, + { AR5K_RPGTO, 0x00000000 }, + { AR5K_RFCNT, 0x0000001f }, + { AR5K_QUEUE_TXDP(0), 0x00000000 }, + { AR5K_QUEUE_TXDP(1), 0x00000000 }, + { AR5K_QUEUE_TXDP(2), 0x00000000 }, + { AR5K_QUEUE_TXDP(3), 0x00000000 }, + { AR5K_QUEUE_TXDP(4), 0x00000000 }, + { AR5K_QUEUE_TXDP(5), 0x00000000 }, + { AR5K_QUEUE_TXDP(6), 0x00000000 }, + { AR5K_QUEUE_TXDP(7), 0x00000000 }, + { AR5K_QUEUE_TXDP(8), 0x00000000 }, + { AR5K_QUEUE_TXDP(9), 0x00000000 }, + { AR5K_DCU_FP, 0x00000000 }, + { AR5K_DCU_TXP, 0x00000000 }, + { AR5K_DCU_TX_FILTER, 0x00000000 }, + /* Unknown table */ + { 0x1078, 0x00000000 }, + { 0x10b8, 0x00000000 }, + { 0x10f8, 0x00000000 }, + { 0x1138, 0x00000000 }, + { 0x1178, 0x00000000 }, + { 0x11b8, 0x00000000 }, + { 0x11f8, 0x00000000 }, + { 0x1238, 0x00000000 }, + { 0x1278, 0x00000000 }, + { 0x12b8, 0x00000000 }, + { 0x12f8, 0x00000000 }, + { 0x1338, 0x00000000 }, + { 0x1378, 0x00000000 }, + { 0x13b8, 0x00000000 }, + { 0x13f8, 0x00000000 }, + { 0x1438, 0x00000000 }, + { 0x1478, 0x00000000 }, + { 0x14b8, 0x00000000 }, + { 0x14f8, 0x00000000 }, + { 0x1538, 0x00000000 }, + { 0x1578, 0x00000000 }, + { 0x15b8, 0x00000000 }, + { 0x15f8, 0x00000000 }, + { 0x1638, 0x00000000 }, + { 0x1678, 0x00000000 }, + { 0x16b8, 0x00000000 }, + { 0x16f8, 0x00000000 }, + { 0x1738, 0x00000000 }, + { 0x1778, 0x00000000 }, + { 0x17b8, 0x00000000 }, + { 0x17f8, 0x00000000 }, + { 0x103c, 0x00000000 }, + { 0x107c, 0x00000000 }, + { 0x10bc, 0x00000000 }, + { 0x10fc, 0x00000000 }, + { 0x113c, 0x00000000 }, + { 0x117c, 0x00000000 }, + { 0x11bc, 0x00000000 }, + { 0x11fc, 0x00000000 }, + { 0x123c, 0x00000000 }, + { 0x127c, 0x00000000 }, + { 0x12bc, 0x00000000 }, + { 0x12fc, 0x00000000 }, + { 0x133c, 0x00000000 }, + { 0x137c, 0x00000000 }, + { 0x13bc, 0x00000000 }, + { 0x13fc, 0x00000000 }, + { 0x143c, 0x00000000 }, + { 0x147c, 0x00000000 }, + { AR5K_DCU_TX_FILTER_CLR, 0x00000000 }, + { AR5K_DCU_TX_FILTER_SET, 0x00000000 }, + { AR5K_STA_ID1, 0x00000000 }, + { AR5K_BSS_ID0, 0x00000000 }, + { AR5K_BSS_ID1, 0x00000000 }, + /*{ AR5K_RSSI_THR, 0x00000000 },*/ /* Found on SuperAG cards */ + { AR5K_BEACON_5211, 0x00000000 }, /* Found on SuperAG cards */ + { AR5K_CFP_PERIOD_5211, 0x00000000 }, /* Found on SuperAG cards */ + { AR5K_TIMER0_5211, 0x00000030 }, /* Found on SuperAG cards */ + { AR5K_TIMER1_5211, 0x0007ffff }, /* Found on SuperAG cards */ + { AR5K_TIMER2_5211, 0x01ffffff }, /* Found on SuperAG cards */ + { AR5K_TIMER3_5211, 0x00000031 }, /* Found on SuperAG cards */ + { AR5K_CFP_DUR_5211, 0x00000000 }, /* Found on SuperAG cards */ + { AR5K_RX_FILTER_5211, 0x00000000 }, + { AR5K_DIAG_SW_5211, 0x00000000 }, + { AR5K_ADDAC_TEST, 0x00000000 }, + { AR5K_DEFAULT_ANTENNA, 0x00000000 }, + { 0x8080, 0x00000000 }, + /*{ 0x805c, 0xffffc7ff },*/ /* Old value */ + { 0x805c, 0x000fc78f }, + { AR5K_NAV_5211, 0x00000000 }, /* Not found on recent */ + { AR5K_RTS_OK_5211, 0x00000000 }, /* dumps but it makes */ + { AR5K_RTS_FAIL_5211, 0x00000000 }, /* sense to reset counters */ + { AR5K_ACK_FAIL_5211, 0x00000000 }, /* since pcu registers */ + { AR5K_FCS_FAIL_5211, 0x00000000 }, /* are skiped during chan*/ + { AR5K_BEACON_CNT_5211, 0x00000000 }, /* change */ + { AR5K_XRMODE, 0x2a82301a }, + { AR5K_XRDELAY, 0x05dc01e0 }, + { AR5K_XRTIMEOUT, 0x1f402710 }, + { AR5K_XRCHIRP, 0x01f40000 }, + { AR5K_XRSTOMP, 0x00001e1c }, + { AR5K_SLEEP0, 0x0002aaaa }, /* Found on SuperAG cards */ + { AR5K_SLEEP1, 0x02005555 }, /* Found on SuperAG cards */ + { AR5K_SLEEP2, 0x00000000 }, /* Found on SuperAG cards */ + { AR5K_BSS_IDM0, 0xffffffff }, + { AR5K_BSS_IDM1, 0x0000ffff }, + { AR5K_TXPC, 0x00000000 }, + { AR5K_PROFCNT_TX, 0x00000000 }, + { AR5K_PROFCNT_RX, 0x00000000 }, + { AR5K_PROFCNT_RXCLR, 0x00000000 }, + { AR5K_PROFCNT_CYCLE, 0x00000000 }, + { 0x80fc, 0x00000088 }, + { AR5K_RATE_DUR(0), 0x00000000 }, + { AR5K_RATE_DUR(1), 0x0000008c }, + { AR5K_RATE_DUR(2), 0x000000e4 }, + { AR5K_RATE_DUR(3), 0x000002d5 }, + { AR5K_RATE_DUR(4), 0x00000000 }, + { AR5K_RATE_DUR(5), 0x00000000 }, + { AR5K_RATE_DUR(6), 0x000000a0 }, + { AR5K_RATE_DUR(7), 0x000001c9 }, + { AR5K_RATE_DUR(8), 0x0000002c }, + { AR5K_RATE_DUR(9), 0x0000002c }, + { AR5K_RATE_DUR(10), 0x00000030 }, + { AR5K_RATE_DUR(11), 0x0000003c }, + { AR5K_RATE_DUR(12), 0x0000002c }, + { AR5K_RATE_DUR(13), 0x0000002c }, + { AR5K_RATE_DUR(14), 0x00000030 }, + { AR5K_RATE_DUR(15), 0x0000003c }, + { AR5K_RATE_DUR(16), 0x00000000 }, + { AR5K_RATE_DUR(17), 0x00000000 }, + { AR5K_RATE_DUR(18), 0x00000000 }, + { AR5K_RATE_DUR(19), 0x00000000 }, + { AR5K_RATE_DUR(20), 0x00000000 }, + { AR5K_RATE_DUR(21), 0x00000000 }, + { AR5K_RATE_DUR(22), 0x00000000 }, + { AR5K_RATE_DUR(23), 0x00000000 }, + { AR5K_RATE_DUR(24), 0x000000d5 }, + { AR5K_RATE_DUR(25), 0x000000df }, + { AR5K_RATE_DUR(26), 0x00000102 }, + { AR5K_RATE_DUR(27), 0x0000013a }, + { AR5K_RATE_DUR(28), 0x00000075 }, + { AR5K_RATE_DUR(29), 0x0000007f }, + { AR5K_RATE_DUR(30), 0x000000a2 }, + { AR5K_RATE_DUR(31), 0x00000000 }, + { 0x8100, 0x00010002}, + { AR5K_TSF_PARM, 0x00000001 }, + { 0x8108, 0x000000c0 }, + { AR5K_PHY_ERR_FIL, 0x00000000 }, + { 0x8110, 0x00000168 }, + { 0x8114, 0x00000000 }, + /* Some kind of table + * also notice ...03<-02<-01<-00) */ + { 0x87c0, 0x03020100 }, + { 0x87c4, 0x07060504 }, + { 0x87c8, 0x0b0a0908 }, + { 0x87cc, 0x0f0e0d0c }, + { 0x87d0, 0x13121110 }, + { 0x87d4, 0x17161514 }, + { 0x87d8, 0x1b1a1918 }, + { 0x87dc, 0x1f1e1d1c }, + /* loop ? */ + { 0x87e0, 0x03020100 }, + { 0x87e4, 0x07060504 }, + { 0x87e8, 0x0b0a0908 }, + { 0x87ec, 0x0f0e0d0c }, + { 0x87f0, 0x13121110 }, + { 0x87f4, 0x17161514 }, + { 0x87f8, 0x1b1a1918 }, + { 0x87fc, 0x1f1e1d1c }, + /* PHY registers */ + /*{ AR5K_PHY_AGC, 0x00000000 },*/ + { AR5K_PHY(3), 0xad848e19 }, + { AR5K_PHY(4), 0x7d28e000 }, + { AR5K_PHY_TIMING_3, 0x9c0a9f6b }, + { AR5K_PHY_ACT, 0x00000000 }, + /*{ AR5K_PHY(11), 0x00022ffe },*/ + /*{ AR5K_PHY(15), 0x00020100 },*/ + { AR5K_PHY(16), 0x206a017a }, + /*{ AR5K_PHY(19), 0x1284613c },*/ + { AR5K_PHY(21), 0x00000859 }, + { AR5K_PHY(64), 0x00000000 }, + { AR5K_PHY(65), 0x00000000 }, + { AR5K_PHY(66), 0x00000000 }, + { AR5K_PHY(67), 0x00800000 }, + { AR5K_PHY(68), 0x00000001 }, + /*{ AR5K_PHY(71), 0x0000092a },*/ /* Old value */ + { AR5K_PHY(71), 0x00000c80 }, + { AR5K_PHY_IQ, 0x05100000 }, + { AR5K_PHY(74), 0x00000001 }, + { AR5K_PHY(75), 0x00000004 }, + { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022 }, + { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d }, + { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f }, + /*{ AR5K_PHY(80), 0x00000004 },*/ + { AR5K_PHY(82), 0x9280b212 }, + { AR5K_PHY_RADAR, 0x5d50e188 }, + /*{ AR5K_PHY(86), 0x000000ff },*/ + { AR5K_PHY(87), 0x004b6a8e }, + { AR5K_PHY(90), 0x000003ce }, + { AR5K_PHY(92), 0x192fb515 }, + /*{ AR5K_PHY(93), 0x00000000 },*/ + { AR5K_PHY(94), 0x00000001 }, + { AR5K_PHY(95), 0x00000000 }, + /*{ AR5K_PHY(644), 0x0080a333 },*/ /* Old value */ + /*{ AR5K_PHY(645), 0x00206c10 },*/ /* Old value */ + { AR5K_PHY(644), 0x00806333 }, + { AR5K_PHY(645), 0x00106c10 }, + { AR5K_PHY(646), 0x009c4060 }, + /*{ AR5K_PHY(647), 0x1483800a },*/ /* Old value */ + { AR5K_PHY(647), 0x1483800a }, + { AR5K_PHY(648), 0x01831061 }, + { AR5K_PHY(649), 0x00000400 }, + /*{ AR5K_PHY(650), 0x000001b5 },*/ + { AR5K_PHY(651), 0x00000000 }, + { AR5K_PHY_TXPOWER_RATE3, 0x20202020 }, + { AR5K_PHY_TXPOWER_RATE2, 0x20202020 }, + /*{ AR5K_PHY(655), 0x13c889af },*/ + { AR5K_PHY(656), 0x38490a20 }, + { AR5K_PHY(657), 0x00007bb6 }, + { AR5K_PHY(658), 0x0fff3ffc }, + /*{ AR5K_PHY_CCKTXCTL, 0x00000000 },*/ +}; + +/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */ +static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { + { AR5K_PHY(640), + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00000008, 0x00000008, 0x0000000b, 0x0000000e, 0x0000000e } }, + { AR5K_PHY(0), + { 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } }, + { AR5K_TIME_OUT, + { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } }, + { AR5K_PHY_TURBO, + { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } }, + { AR5K_PHY(9), + { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(17), + { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } }, + { AR5K_PHY_AGCCTL, + { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d18 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY(26), + { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } }, + { AR5K_PHY(70), + { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } }, + { AR5K_PHY(73), + { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } }, + { 0xa230, + { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } }, +}; + +/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */ +/* New dump pending */ +static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { + { AR5K_PHY(640), /* This one differs from ar5212_ini_mode_start ! */ + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00000000, 0x00000000, 0x00000003, 0x00000006, 0x00000006 } }, + { AR5K_TXCFG, + { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } }, + { AR5K_PHY(10), + { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY(13), + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(14), + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY(18), + { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } }, + { AR5K_PHY(20), + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } }, + { AR5K_PHY(27), + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } }, + { 0xa21c, + { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, + { AR5K_DCU_FP, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_AGC, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(11), + { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } }, + { AR5K_PHY(15), + { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } }, + { AR5K_PHY(19), + { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } }, + { AR5K_PHY_PAPD_PROBE, + { 0x00004883, 0x00004883, 0x00004883, 0x00004883, 0x00004883 } }, + { AR5K_PHY(80), + { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } }, + { AR5K_PHY(86), + { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, + { AR5K_PHY(93), + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_SPENDING, + { 0x00000018, 0x00000018, 0x00000018, 0x00000018, 0x00000018 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(642), + { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xa23c, + { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, +}; + +/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */ +/* XXX: No dumps for turbog yet, but i found settings from old values so it should be ok */ +static const struct ath5k_ini_mode ar5212_rf5112_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY(10), + { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY(13), + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(14), + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY(18), + { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } }, + { AR5K_PHY(20), + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7ee80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } }, + { AR5K_PHY(27), + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } }, + { AR5K_PHY(642), + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } }, + { 0xa21c, + { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, + { AR5K_DCU_FP, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_AGC, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(11), + { 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe, 0x00022ffe } }, + { AR5K_PHY(15), + { 0x00020100, 0x00020100, 0x00020100, 0x00020100, 0x00020100 } }, + { AR5K_PHY(19), + { 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c, 0x1284613c } }, + { AR5K_PHY_PAPD_PROBE, + { 0x00004882, 0x00004882, 0x00004882, 0x00004882, 0x00004882 } }, + { AR5K_PHY(80), + { 0x00000004, 0x00000004, 0x00000004, 0x00000004, 0x00000004 } }, + { AR5K_PHY(86), + { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, + { AR5K_PHY(93), + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa228, + { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, + { 0xa23c, + { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, +}; + +/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */ +/* XXX: No dumps for turbog yet, so turbog is the same with g here with some + * minor tweaking based on dumps from other chips */ +static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g gTurbo */ + { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY(10), + { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY(13), + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(14), + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY(18), + { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } }, + { AR5K_PHY(20), + { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, + { AR5K_PHY(27), + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(642), + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } }, + { 0xa21c, + { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0xa300, + { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } }, + { 0xa304, + { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } }, + { 0xa308, + { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } }, + { 0xa30c, + { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, + { 0xa310, + { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } }, + { 0xa314, + { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, + { 0xa318, + { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, + { 0xa31c, + { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } }, + { 0xa320, + { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } }, + { 0xa324, + { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } }, + { 0xa328, + { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } }, + { 0xa32c, + { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } }, + { 0xa330, + { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } }, + { 0xa334, + { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, + { AR5K_DCU_FP, + { 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0, 0x000003e0 } }, + { 0x4068, + { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, + { 0x8060, + { 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f, 0x0000000f } }, + { 0x809c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x80a0, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8118, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x811c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8120, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8124, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8128, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x812c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8130, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8134, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8138, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x813c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0x8140, + { 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9, 0x800003f9 } }, + { 0x8144, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_AGC, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(11), + { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } }, + { AR5K_PHY(15), + { 0x00200400, 0x00200400, 0x00200400, 0x00200400, 0x00200400 } }, + { AR5K_PHY(19), + { 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c } }, + { AR5K_PHY_SCR, + { 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f, 0x0000001f } }, + { AR5K_PHY_SLMT, + { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, + { AR5K_PHY_SCAL, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, + { AR5K_PHY(86), + { 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff } }, + { AR5K_PHY(96), + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(97), + { 0x02800000, 0x02800000, 0x02800000, 0x02800000, 0x02800000 } }, + { AR5K_PHY(104), + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(120), + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY(121), + { 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa } }, + { AR5K_PHY(122), + { 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478, 0x3c466478 } }, + { AR5K_PHY(123), + { 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa } }, + { AR5K_PHY_SCLOCK, + { 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c } }, + { AR5K_PHY_SDELAY, + { 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff, 0x000000ff } }, + { AR5K_PHY_SPENDING, + { 0x00000014, 0x00000014, 0x00000014, 0x00000014, 0x00000014 } }, + { 0xa228, + { 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5 } }, + { 0xa23c, + { 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af, 0x93c889af } }, + { 0xa24c, + { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, + { 0xa250, + { 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000 } }, + { 0xa254, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa258, + { 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380 } }, + { 0xa25c, + { 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01 } }, + { 0xa260, + { 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01, 0x5f690f01 } }, + { 0xa264, + { 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11 } }, + { 0xa268, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa26c, + { 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a, 0x0c30c16a } }, + { 0xa270, + { 0x00820820, 0x00820820, 0x00820820, 0x00820820, 0x00820820 } }, + { 0xa274, + { 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa, 0x081b7caa } }, + { 0xa278, + { 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce } }, + { 0xa27c, + { 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce } }, + { 0xa338, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa33c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa340, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa344, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0xa348, + { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, + { 0xa34c, + { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, + { 0xa350, + { 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff } }, + { 0xa354, + { 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff } }, + { 0xa358, + { 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f } }, + { 0xa35c, + { 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f } }, + { 0xa360, + { 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207 } }, + { 0xa364, + { 0x17601685, 0x17601685, 0x17601685, 0x17601685, 0x17601685 } }, + { 0xa368, + { 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104 } }, + { 0xa36c, + { 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03 } }, + { 0xa370, + { 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883 } }, + { 0xa374, + { 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803 } }, + { 0xa378, + { 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682 } }, + { 0xa37c, + { 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482 } }, + { 0xa380, + { 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba } }, + { 0xa384, + { 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0 } }, +}; + +/* + * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with + * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI) + */ + +/* RF5111 Initial BaseBand Gain settings */ +static const struct ath5k_ini rf5111_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000020 }, + { AR5K_BB_GAIN(2), 0x00000010 }, + { AR5K_BB_GAIN(3), 0x00000030 }, + { AR5K_BB_GAIN(4), 0x00000008 }, + { AR5K_BB_GAIN(5), 0x00000028 }, + { AR5K_BB_GAIN(6), 0x00000004 }, + { AR5K_BB_GAIN(7), 0x00000024 }, + { AR5K_BB_GAIN(8), 0x00000014 }, + { AR5K_BB_GAIN(9), 0x00000034 }, + { AR5K_BB_GAIN(10), 0x0000000c }, + { AR5K_BB_GAIN(11), 0x0000002c }, + { AR5K_BB_GAIN(12), 0x00000002 }, + { AR5K_BB_GAIN(13), 0x00000022 }, + { AR5K_BB_GAIN(14), 0x00000012 }, + { AR5K_BB_GAIN(15), 0x00000032 }, + { AR5K_BB_GAIN(16), 0x0000000a }, + { AR5K_BB_GAIN(17), 0x0000002a }, + { AR5K_BB_GAIN(18), 0x00000006 }, + { AR5K_BB_GAIN(19), 0x00000026 }, + { AR5K_BB_GAIN(20), 0x00000016 }, + { AR5K_BB_GAIN(21), 0x00000036 }, + { AR5K_BB_GAIN(22), 0x0000000e }, + { AR5K_BB_GAIN(23), 0x0000002e }, + { AR5K_BB_GAIN(24), 0x00000001 }, + { AR5K_BB_GAIN(25), 0x00000021 }, + { AR5K_BB_GAIN(26), 0x00000011 }, + { AR5K_BB_GAIN(27), 0x00000031 }, + { AR5K_BB_GAIN(28), 0x00000009 }, + { AR5K_BB_GAIN(29), 0x00000029 }, + { AR5K_BB_GAIN(30), 0x00000005 }, + { AR5K_BB_GAIN(31), 0x00000025 }, + { AR5K_BB_GAIN(32), 0x00000015 }, + { AR5K_BB_GAIN(33), 0x00000035 }, + { AR5K_BB_GAIN(34), 0x0000000d }, + { AR5K_BB_GAIN(35), 0x0000002d }, + { AR5K_BB_GAIN(36), 0x00000003 }, + { AR5K_BB_GAIN(37), 0x00000023 }, + { AR5K_BB_GAIN(38), 0x00000013 }, + { AR5K_BB_GAIN(39), 0x00000033 }, + { AR5K_BB_GAIN(40), 0x0000000b }, + { AR5K_BB_GAIN(41), 0x0000002b }, + { AR5K_BB_GAIN(42), 0x0000002b }, + { AR5K_BB_GAIN(43), 0x0000002b }, + { AR5K_BB_GAIN(44), 0x0000002b }, + { AR5K_BB_GAIN(45), 0x0000002b }, + { AR5K_BB_GAIN(46), 0x0000002b }, + { AR5K_BB_GAIN(47), 0x0000002b }, + { AR5K_BB_GAIN(48), 0x0000002b }, + { AR5K_BB_GAIN(49), 0x0000002b }, + { AR5K_BB_GAIN(50), 0x0000002b }, + { AR5K_BB_GAIN(51), 0x0000002b }, + { AR5K_BB_GAIN(52), 0x0000002b }, + { AR5K_BB_GAIN(53), 0x0000002b }, + { AR5K_BB_GAIN(54), 0x0000002b }, + { AR5K_BB_GAIN(55), 0x0000002b }, + { AR5K_BB_GAIN(56), 0x0000002b }, + { AR5K_BB_GAIN(57), 0x0000002b }, + { AR5K_BB_GAIN(58), 0x0000002b }, + { AR5K_BB_GAIN(59), 0x0000002b }, + { AR5K_BB_GAIN(60), 0x0000002b }, + { AR5K_BB_GAIN(61), 0x0000002b }, + { AR5K_BB_GAIN(62), 0x00000002 }, + { AR5K_BB_GAIN(63), 0x00000016 }, +}; + +/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414) */ +static const struct ath5k_ini rf5112_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000 }, + { AR5K_BB_GAIN(1), 0x00000001 }, + { AR5K_BB_GAIN(2), 0x00000002 }, + { AR5K_BB_GAIN(3), 0x00000003 }, + { AR5K_BB_GAIN(4), 0x00000004 }, + { AR5K_BB_GAIN(5), 0x00000005 }, + { AR5K_BB_GAIN(6), 0x00000008 }, + { AR5K_BB_GAIN(7), 0x00000009 }, + { AR5K_BB_GAIN(8), 0x0000000a }, + { AR5K_BB_GAIN(9), 0x0000000b }, + { AR5K_BB_GAIN(10), 0x0000000c }, + { AR5K_BB_GAIN(11), 0x0000000d }, + { AR5K_BB_GAIN(12), 0x00000010 }, + { AR5K_BB_GAIN(13), 0x00000011 }, + { AR5K_BB_GAIN(14), 0x00000012 }, + { AR5K_BB_GAIN(15), 0x00000013 }, + { AR5K_BB_GAIN(16), 0x00000014 }, + { AR5K_BB_GAIN(17), 0x00000015 }, + { AR5K_BB_GAIN(18), 0x00000018 }, + { AR5K_BB_GAIN(19), 0x00000019 }, + { AR5K_BB_GAIN(20), 0x0000001a }, + { AR5K_BB_GAIN(21), 0x0000001b }, + { AR5K_BB_GAIN(22), 0x0000001c }, + { AR5K_BB_GAIN(23), 0x0000001d }, + { AR5K_BB_GAIN(24), 0x00000020 }, + { AR5K_BB_GAIN(25), 0x00000021 }, + { AR5K_BB_GAIN(26), 0x00000022 }, + { AR5K_BB_GAIN(27), 0x00000023 }, + { AR5K_BB_GAIN(28), 0x00000024 }, + { AR5K_BB_GAIN(29), 0x00000025 }, + { AR5K_BB_GAIN(30), 0x00000028 }, + { AR5K_BB_GAIN(31), 0x00000029 }, + { AR5K_BB_GAIN(32), 0x0000002a }, + { AR5K_BB_GAIN(33), 0x0000002b }, + { AR5K_BB_GAIN(34), 0x0000002c }, + { AR5K_BB_GAIN(35), 0x0000002d }, + { AR5K_BB_GAIN(36), 0x00000030 }, + { AR5K_BB_GAIN(37), 0x00000031 }, + { AR5K_BB_GAIN(38), 0x00000032 }, + { AR5K_BB_GAIN(39), 0x00000033 }, + { AR5K_BB_GAIN(40), 0x00000034 }, + { AR5K_BB_GAIN(41), 0x00000035 }, + { AR5K_BB_GAIN(42), 0x00000035 }, + { AR5K_BB_GAIN(43), 0x00000035 }, + { AR5K_BB_GAIN(44), 0x00000035 }, + { AR5K_BB_GAIN(45), 0x00000035 }, + { AR5K_BB_GAIN(46), 0x00000035 }, + { AR5K_BB_GAIN(47), 0x00000035 }, + { AR5K_BB_GAIN(48), 0x00000035 }, + { AR5K_BB_GAIN(49), 0x00000035 }, + { AR5K_BB_GAIN(50), 0x00000035 }, + { AR5K_BB_GAIN(51), 0x00000035 }, + { AR5K_BB_GAIN(52), 0x00000035 }, + { AR5K_BB_GAIN(53), 0x00000035 }, + { AR5K_BB_GAIN(54), 0x00000035 }, + { AR5K_BB_GAIN(55), 0x00000035 }, + { AR5K_BB_GAIN(56), 0x00000035 }, + { AR5K_BB_GAIN(57), 0x00000035 }, + { AR5K_BB_GAIN(58), 0x00000035 }, + { AR5K_BB_GAIN(59), 0x00000035 }, + { AR5K_BB_GAIN(60), 0x00000035 }, + { AR5K_BB_GAIN(61), 0x00000035 }, + { AR5K_BB_GAIN(62), 0x00000010 }, + { AR5K_BB_GAIN(63), 0x0000001a }, +}; + + +/* + * Write initial register dump + */ +static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, + const struct ath5k_ini *ini_regs, bool change_channel) +{ + unsigned int i; + + /* Write initial registers */ + for (i = 0; i < size; i++) { + /* On channel change there is + * no need to mess with PCU */ + if (change_channel && + ini_regs[i].ini_register >= AR5K_PCU_MIN && + ini_regs[i].ini_register <= AR5K_PCU_MAX) + continue; + + switch (ini_regs[i].ini_mode) { + case AR5K_INI_READ: + /* Cleared on read */ + ath5k_hw_reg_read(ah, ini_regs[i].ini_register); + break; + case AR5K_INI_WRITE: + default: + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_regs[i].ini_value, + ini_regs[i].ini_register); + } + } +} + +static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, + unsigned int size, const struct ath5k_ini_mode *ini_mode, + u8 mode) +{ + unsigned int i; + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode], + (u32)ini_mode[i].mode_register); + } + +} + +int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) +{ + /* + * Write initial register settings + */ + + /* For AR5212 and combatible */ + if (ah->ah_version == AR5K_AR5212){ + + /* First set of mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(ar5212_ini_mode_start), + ar5212_ini_mode_start, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini), + ar5212_ini, change_channel); + + /* Second set of mode-specific settings */ + if (ah->ah_radio == AR5K_RF5111){ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(ar5212_rf5111_ini_mode_end), + ar5212_rf5111_ini_mode_end, mode); + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, change_channel); + } else if (ah->ah_radio == AR5K_RF5112){ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(ar5212_rf5112_ini_mode_end), + ar5212_rf5112_ini_mode_end, mode); + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + } else if (ah->ah_radio == AR5K_RF5413){ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5413_ini_mode_end), + rf5413_ini_mode_end, mode); + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + } + /* For AR5211 */ + } else if (ah->ah_version == AR5K_AR5211) { + + if(mode > 2){ /* AR5K_INI_VAL_11B */ + ATH5K_ERR(ah->ah_sc,"unsupported channel mode: %d\n", mode); + return -EINVAL; + } + + /* Mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode), + ar5211_ini_mode, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini), + ar5211_ini, change_channel); + + /* AR5211 only comes with 5111 */ + + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, change_channel); + /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */ + } else if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini), + ar5210_ini, change_channel); + } + + return 0; +} diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c new file mode 100644 index 000000000000..b95941797141 --- /dev/null +++ b/drivers/net/wireless/ath5k/phy.c @@ -0,0 +1,2071 @@ +/* + * PHY functions + * + * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/delay.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* Struct to hold initial RF register values (RF Banks) */ +struct ath5k_ini_rf { + u8 rf_bank; /* check out ath5k_reg.h */ + u16 rf_register; /* register address */ + u32 rf_value[5]; /* register value for different modes (above) */ +}; + +/* + * Mode-specific RF Gain table (64bytes) for RF5111/5112 + * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial + * RF Gain values are included in AR5K_AR5210_INI) + */ +struct ath5k_ini_rfgain { + u16 rfg_register; /* RF Gain register address */ + u32 rfg_value[2]; /* [freq (see below)] */ +}; + +struct ath5k_gain_opt { + u32 go_default; + u32 go_steps_count; + const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; +}; + +/* RF5111 mode-specific init registers */ +static const struct ath5k_ini_rf rfregs_5111[] = { + { 0, 0x989c, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } }, + { 0, 0x989c, + { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } }, + { 0, 0x98d4, + { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } }, + { 1, 0x98d4, + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d4, + { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } }, + { 3, 0x98d8, + { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, + { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } }, + { 6, 0x989c, + { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } }, + { 6, 0x989c, + { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } }, + { 6, 0x989c, + { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } }, + { 6, 0x989c, + { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } }, + { 6, 0x98d4, + { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } }, + { 7, 0x989c, + { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } }, + { 7, 0x989c, + { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, + { 7, 0x989c, + { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, + { 7, 0x989c, + { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } }, + { 7, 0x989c, + { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } }, + { 7, 0x989c, + { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } }, + { 7, 0x989c, + { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } }, +}; + +/* Initial RF Gain settings for RF5111 */ +static const struct ath5k_ini_rfgain rfgain_5111[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, + { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, + { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, + { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, + { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, + { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, + { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, + { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } }, + { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } }, + { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } }, + { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } }, + { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } }, + { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } }, + { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } }, + { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } }, + { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } }, + { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } }, + { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } }, + { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } }, + { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } }, + { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } }, + { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } }, + { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } }, + { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } }, + { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } }, + { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } }, + { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } }, + { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } }, + { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } }, + { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } }, + { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } }, + { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } }, + { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } }, + { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } }, + { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } }, + { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } }, + { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } }, + { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } }, + { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } }, + { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } }, + { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } }, + { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } }, + { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } }, + { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } }, + { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } }, + { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } }, +}; + +static const struct ath5k_gain_opt rfgain_opt_5111 = { + 4, + 9, + { + { { 4, 1, 1, 1 }, 6 }, + { { 4, 0, 1, 1 }, 4 }, + { { 3, 1, 1, 1 }, 3 }, + { { 4, 0, 0, 1 }, 1 }, + { { 4, 1, 1, 0 }, 0 }, + { { 4, 0, 1, 0 }, -2 }, + { { 3, 1, 1, 0 }, -3 }, + { { 4, 0, 0, 0 }, -4 }, + { { 2, 1, 1, 0 }, -6 } + } +}; + +/* RF5112 mode-specific init registers */ +static const struct ath5k_ini_rf rfregs_5112[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, + { 3, 0x98dc, + { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, + { 6, 0x989c, + { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } }, + { 6, 0x989c, + { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } }, + { 6, 0x989c, + { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } }, + { 6, 0x989c, + { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } }, + { 6, 0x989c, + { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, + { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } }, + { 6, 0x989c, + { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } }, + { 6, 0x989c, + { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, + { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } }, + { 6, 0x989c, + { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } }, + { 6, 0x989c, + { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, + { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } }, + { 6, 0x989c, + { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } }, + { 6, 0x989c, + { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } }, + { 6, 0x989c, + { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } }, + { 6, 0x989c, + { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } }, + { 6, 0x989c, + { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } }, + { 6, 0x989c, + { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } }, + { 6, 0x989c, + { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } }, + { 6, 0x989c, + { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } }, + { 6, 0x989c, + { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } }, + { 6, 0x98d0, + { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } }, + { 7, 0x989c, + { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, + { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, + { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, + { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, + { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } }, + { 7, 0x989c, + { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, + { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, + { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } }, + { 7, 0x989c, + { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } }, + { 7, 0x989c, + { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, + { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, + { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, +}; + +/* RF5112A mode-specific init registers */ +static const struct ath5k_ini_rf rfregs_5112a[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, + { 3, 0x98dc, + { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, + { 6, 0x989c, + { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } }, + { 6, 0x989c, + { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } }, + { 6, 0x989c, + { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } }, + { 6, 0x989c, + { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } }, + { 6, 0x989c, + { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } }, + { 6, 0x989c, + { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } }, + { 6, 0x989c, + { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x00190000, 0x00190000, 0x00190000, 0x00190000, 0x00190000 } }, + { 6, 0x989c, + { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, + { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } }, + { 6, 0x989c, + { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } }, + { 6, 0x989c, + { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } }, + { 6, 0x989c, + { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } }, + { 6, 0x989c, + { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } }, + { 6, 0x989c, + { 0x00020080, 0x00020080, 0x00020080, 0x00020080, 0x00020080 } }, + { 6, 0x989c, + { 0x00080009, 0x00080009, 0x00080009, 0x00080009, 0x00080009 } }, + { 6, 0x989c, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } }, + { 6, 0x989c, + { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } }, + { 6, 0x989c, + { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } }, + { 6, 0x989c, + { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } }, + { 6, 0x989c, + { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } }, + { 6, 0x98d8, + { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } }, + { 7, 0x989c, + { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, + { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, + { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, + { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, + { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } }, + { 7, 0x989c, + { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, + { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, + { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } }, + { 7, 0x989c, + { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } }, + { 7, 0x989c, + { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, + { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, + { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, +}; + + +static const struct ath5k_ini_rf rfregs_2112a[] = { + { 1, AR5K_RF_BUFFER_CONTROL_4, + /* mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020 } }, + { 2, AR5K_RF_BUFFER_CONTROL_3, + { 0x03060408, 0x03060408, 0x03070408 } }, + { 3, AR5K_RF_BUFFER_CONTROL_6, + { 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, AR5K_RF_BUFFER, + { 0x0a000000, 0x0a000000, 0x0a000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00800000, 0x00800000, 0x00800000 } }, + { 6, AR5K_RF_BUFFER, + { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00010000, 0x00010000, 0x00010000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00180000, 0x00180000, 0x00180000 } }, + { 6, AR5K_RF_BUFFER, + { 0x006e0000, 0x006e0000, 0x006e0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00c70000, 0x00c70000, 0x00c70000 } }, + { 6, AR5K_RF_BUFFER, + { 0x004b0000, 0x004b0000, 0x004b0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x04480000, 0x04480000, 0x04480000 } }, + { 6, AR5K_RF_BUFFER, + { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00e40000, 0x00e40000, 0x00e40000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x043f0000, 0x043f0000, 0x043f0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x0c0c0000, 0x0c0c0000, 0x0c0c0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x02190000, 0x02190000, 0x02190000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00240000, 0x00240000, 0x00240000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00b40000, 0x00b40000, 0x00b40000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00990000, 0x00990000, 0x00990000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00500000, 0x00500000, 0x00500000 } }, + { 6, AR5K_RF_BUFFER, + { 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00120000, 0x00120000, 0x00120000 } }, + { 6, AR5K_RF_BUFFER, + { 0xc0320000, 0xc0320000, 0xc0320000 } }, + { 6, AR5K_RF_BUFFER, + { 0x01740000, 0x01740000, 0x01740000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00110000, 0x00110000, 0x00110000 } }, + { 6, AR5K_RF_BUFFER, + { 0x86280000, 0x86280000, 0x86280000 } }, + { 6, AR5K_RF_BUFFER, + { 0x31840000, 0x31840000, 0x31840000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00f20080, 0x00f20080, 0x00f20080 } }, + { 6, AR5K_RF_BUFFER, + { 0x00070019, 0x00070019, 0x00070019 } }, + { 6, AR5K_RF_BUFFER, + { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x00000000, 0x00000000, 0x00000000 } }, + { 6, AR5K_RF_BUFFER, + { 0x000000b2, 0x000000b2, 0x000000b2 } }, + { 6, AR5K_RF_BUFFER, + { 0x00b02184, 0x00b02184, 0x00b02184 } }, + { 6, AR5K_RF_BUFFER, + { 0x004125a4, 0x004125a4, 0x004125a4 } }, + { 6, AR5K_RF_BUFFER, + { 0x00119220, 0x00119220, 0x00119220 } }, + { 6, AR5K_RF_BUFFER, + { 0x001a4800, 0x001a4800, 0x001a4800 } }, + { 6, AR5K_RF_BUFFER_CONTROL_5, + { 0x000b0230, 0x000b0230, 0x000b0230 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000094, 0x00000094, 0x00000094 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000091, 0x00000091, 0x00000091 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000012, 0x00000012, 0x00000012 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000080, 0x00000080, 0x00000080 } }, + { 7, AR5K_RF_BUFFER, + { 0x000000d9, 0x000000d9, 0x000000d9 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000060, 0x00000060, 0x00000060 } }, + { 7, AR5K_RF_BUFFER, + { 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, AR5K_RF_BUFFER, + { 0x000000a2, 0x000000a2, 0x000000a2 } }, + { 7, AR5K_RF_BUFFER, + { 0x00000052, 0x00000052, 0x00000052 } }, + { 7, AR5K_RF_BUFFER, + { 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, AR5K_RF_BUFFER, + { 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, AR5K_RF_BUFFER, + { 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, AR5K_RF_BUFFER_CONTROL_1, + { 0x00000003, 0x00000003, 0x00000003 } }, +}; + +/* RF5413/5414 mode-specific init registers */ +static const struct ath5k_ini_rf rfregs_5413[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, + { 3, 0x98dc, + { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } }, + { 6, 0x989c, + { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } }, + { 6, 0x989c, + { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } }, + { 6, 0x989c, + { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } }, + { 6, 0x989c, + { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, + { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, + { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } }, + { 6, 0x989c, + { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } }, + { 6, 0x989c, + { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, + { 6, 0x989c, + { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } }, + { 6, 0x989c, + { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } }, + { 6, 0x989c, + { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } }, + { 6, 0x989c, + { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, + { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } }, + { 6, 0x989c, + { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, + { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } }, + { 6, 0x989c, + { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } }, + { 6, 0x989c, + { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } }, + { 6, 0x989c, + { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } }, + { 6, 0x989c, + { 0x00510040, 0x00510040, 0x005100a0, 0x005100a0, 0x005100a0 } }, + { 6, 0x989c, + { 0x0050006a, 0x0050006a, 0x005000dd, 0x005000dd, 0x005000dd } }, + { 6, 0x989c, + { 0x00000001, 0x00000001, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } }, + { 6, 0x989c, + { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00003600 } }, + { 6, 0x98c8, + { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + +/* Initial RF Gain settings for RF5112 */ +static const struct ath5k_ini_rfgain rfgain_5112[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, + { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, + { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, + { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } }, + { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } }, + { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } }, + { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } }, + { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } }, + { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } }, + { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } }, + { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } }, + { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } }, + { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } }, + { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } }, + { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } }, + { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } }, + { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } }, + { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } }, + { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } }, + { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } }, + { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } }, + { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } }, + { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } }, + { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } }, + { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } }, + { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } }, + { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } }, + { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } }, + { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } }, + { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } }, + { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } }, + { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } }, + { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } }, + { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } }, + { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } }, + { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } }, + { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } }, + { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } }, + { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } }, + { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } }, + { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } }, + { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } }, + { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } }, + { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } }, + { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } }, + { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } }, + { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } }, + { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } }, + { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } }, + { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } }, + { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } }, + { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } }, + { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } }, +}; + +/* Initial RF Gain settings for RF5413 */ +static const struct ath5k_ini_rfgain rfgain_5413[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } }, + { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } }, + { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } }, + { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } }, + { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } }, + { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } }, + { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } }, + { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } }, + { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } }, + { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } }, + { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } }, + { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } }, + { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } }, + { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } }, + { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } }, + { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } }, + { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } }, + { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } }, + { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } }, + { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } }, + { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } }, + { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } }, + { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } }, + { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } }, + { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } }, + { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } }, + { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } }, + { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } }, + { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } }, + { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } }, + { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } }, + { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } }, +}; + +static const struct ath5k_gain_opt rfgain_opt_5112 = { + 1, + 8, + { + { { 3, 0, 0, 0, 0, 0, 0 }, 6 }, + { { 2, 0, 0, 0, 0, 0, 0 }, 0 }, + { { 1, 0, 0, 0, 0, 0, 0 }, -3 }, + { { 0, 0, 0, 0, 0, 0, 0 }, -6 }, + { { 0, 1, 1, 0, 0, 0, 0 }, -8 }, + { { 0, 1, 1, 0, 1, 1, 0 }, -10 }, + { { 0, 1, 0, 1, 1, 1, 0 }, -13 }, + { { 0, 1, 0, 1, 1, 0, 1 }, -16 }, + } +}; + +/* + * Used to modify RF Banks before writing them to AR5K_RF_BUFFER + */ +static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits, + u32 first, u32 col, bool set) +{ + u32 mask, entry, last, data, shift, position; + s32 left; + int i; + + data = 0; + + if (rf == NULL) + /* should not happen */ + return 0; + + if (!(col <= 3 && bits <= 32 && first + bits <= 319)) { + ATH5K_PRINTF("invalid values at offset %u\n", offset); + return 0; + } + + entry = ((first - 1) / 8) + offset; + position = (first - 1) % 8; + + if (set == true) + data = ath5k_hw_bitswap(reg, bits); + + for (i = shift = 0, left = bits; left > 0; position = 0, entry++, i++) { + last = (position + left > 8) ? 8 : position + left; + mask = (((1 << last) - 1) ^ ((1 << position) - 1)) << (col * 8); + + if (set == true) { + rf[entry] &= ~mask; + rf[entry] |= ((data << position) << (col * 8)) & mask; + data >>= (8 - position); + } else { + data = (((rf[entry] & mask) >> (col * 8)) >> position) + << shift; + shift += last - position; + } + + left -= 8 - position; + } + + data = set == true ? 1 : ath5k_hw_bitswap(data, bits); + + return data; +} + +static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) +{ + u32 mix, step; + u32 *rf; + + if (ah->ah_rf_banks == NULL) + return 0; + + rf = ah->ah_rf_banks; + ah->ah_gain.g_f_corr = 0; + + if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1) + return 0; + + step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false); + mix = ah->ah_gain.g_step->gos_param[0]; + + switch (mix) { + case 3: + ah->ah_gain.g_f_corr = step * 2; + break; + case 2: + ah->ah_gain.g_f_corr = (step - 5) * 2; + break; + case 1: + ah->ah_gain.g_f_corr = step; + break; + default: + ah->ah_gain.g_f_corr = 0; + break; + } + + return ah->ah_gain.g_f_corr; +} + +static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) +{ + u32 step, mix, level[4]; + u32 *rf; + + if (ah->ah_rf_banks == NULL) + return false; + + rf = ah->ah_rf_banks; + + if (ah->ah_radio == AR5K_RF5111) { + step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0, + false); + level[0] = 0; + level[1] = (step == 0x3f) ? 0x32 : step + 4; + level[2] = (step != 0x3f) ? 0x40 : level[0]; + level[3] = level[2] + 0x32; + + ah->ah_gain.g_high = level[3] - + (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); + ah->ah_gain.g_low = level[0] + + (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); + } else { + mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, + false); + level[0] = level[2] = 0; + + if (mix == 1) { + level[1] = level[3] = 83; + } else { + level[1] = level[3] = 107; + ah->ah_gain.g_high = 55; + } + } + + return (ah->ah_gain.g_current >= level[0] && + ah->ah_gain.g_current <= level[1]) || + (ah->ah_gain.g_current >= level[2] && + ah->ah_gain.g_current <= level[3]); +} + +static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah) +{ + const struct ath5k_gain_opt *go; + int ret = 0; + + switch (ah->ah_radio) { + case AR5K_RF5111: + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + case AR5K_RF5413: /* ??? */ + go = &rfgain_opt_5112; + break; + default: + return 0; + } + + ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + if (ah->ah_gain.g_current >= ah->ah_gain.g_high) { + if (ah->ah_gain.g_step_idx == 0) + return -1; + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target >= ah->ah_gain.g_high && + ah->ah_gain.g_step_idx > 0; + ah->ah_gain.g_step = + &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain - + ah->ah_gain.g_step->gos_gain); + + ret = 1; + goto done; + } + + if (ah->ah_gain.g_current <= ah->ah_gain.g_low) { + if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1)) + return -2; + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target <= ah->ah_gain.g_low && + ah->ah_gain.g_step_idx < go->go_steps_count-1; + ah->ah_gain.g_step = + &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - + ah->ah_gain.g_step->gos_gain); + + ret = 2; + goto done; + } + +done: + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + "ret %d, gain step %u, current gain %u, target gain %u\n", + ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current, + ah->ah_gain.g_target); + + return ret; +} + +/* + * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111 + */ +static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, + struct ieee80211_channel *channel, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 *rf; + const unsigned int rf_size = ARRAY_SIZE(rfregs_5111); + unsigned int i; + int obdb = -1, bank = -1; + u32 ee_mode; + + AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + + rf = ah->ah_rf_banks; + + /* Copy values to modify them */ + for (i = 0; i < rf_size; i++) { + if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) { + ATH5K_ERR(ah->ah_sc, "invalid bank\n"); + return -EINVAL; + } + + if (bank != rfregs_5111[i].rf_bank) { + bank = rfregs_5111[i].rf_bank; + ah->ah_offset[bank] = i; + } + + rf[i] = rfregs_5111[i].rf_value[mode]; + } + + /* Modify bank 0 */ + if (channel->val & CHANNEL_2GHZ) { + if (channel->val & CHANNEL_CCK) + ee_mode = AR5K_EEPROM_MODE_11B; + else + ee_mode = AR5K_EEPROM_MODE_11G; + obdb = 0; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], + ee->ee_ob[ee_mode][obdb], 3, 119, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], + ee->ee_ob[ee_mode][obdb], 3, 122, 0, true)) + return -EINVAL; + + obdb = 1; + /* Modify bank 6 */ + } else { + /* For 11a, Turbo and XR */ + ee_mode = AR5K_EEPROM_MODE_11A; + obdb = channel->freq >= 5725 ? 3 : + (channel->freq >= 5500 ? 2 : + (channel->freq >= 5260 ? 1 : + (channel->freq > 4000 ? 0 : -1))); + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_pwd_84, 1, 51, 3, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_pwd_90, 1, 45, 3, true)) + return -EINVAL; + } + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + !ee->ee_xpd[ee_mode], 1, 95, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_x_gain[ee_mode], 4, 96, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? + ee->ee_ob[ee_mode][obdb] : 0, 3, 104, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? + ee->ee_db[ee_mode][obdb] : 0, 3, 107, 0, true)) + return -EINVAL; + + /* Modify bank 7 */ + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], + ee->ee_i_gain[ee_mode], 6, 29, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], + ee->ee_xpd[ee_mode], 1, 4, 0, true)) + return -EINVAL; + + /* Write RF values */ + for (i = 0; i < rf_size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, rf[i], rfregs_5111[i].rf_register); + } + + return 0; +} + +/* + * Read EEPROM Calibration data, modify RF Banks and Initialize RF5112 + */ +static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, + struct ieee80211_channel *channel, unsigned int mode) +{ + const struct ath5k_ini_rf *rf_ini; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 *rf; + unsigned int rf_size, i; + int obdb = -1, bank = -1; + u32 ee_mode; + + AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + + rf = ah->ah_rf_banks; + + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A + && !test_bit(MODE_IEEE80211A, ah->ah_capabilities.cap_mode)){ + rf_ini = rfregs_2112a; + rf_size = ARRAY_SIZE(rfregs_5112a); + if (mode < 2) { + ATH5K_ERR(ah->ah_sc,"invalid channel mode: %i\n",mode); + return -EINVAL; + } + mode = mode - 2; /*no a/turboa modes for 2112*/ + } else if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + rf_ini = rfregs_5112a; + rf_size = ARRAY_SIZE(rfregs_5112a); + } else { + rf_ini = rfregs_5112; + rf_size = ARRAY_SIZE(rfregs_5112); + } + + /* Copy values to modify them */ + for (i = 0; i < rf_size; i++) { + if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { + ATH5K_ERR(ah->ah_sc, "invalid bank\n"); + return -EINVAL; + } + + if (bank != rf_ini[i].rf_bank) { + bank = rf_ini[i].rf_bank; + ah->ah_offset[bank] = i; + } + + rf[i] = rf_ini[i].rf_value[mode]; + } + + /* Modify bank 6 */ + if (channel->val & CHANNEL_2GHZ) { + if (channel->val & CHANNEL_OFDM) + ee_mode = AR5K_EEPROM_MODE_11G; + else + ee_mode = AR5K_EEPROM_MODE_11B; + obdb = 0; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_ob[ee_mode][obdb], 3, 287, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_ob[ee_mode][obdb], 3, 290, 0, true)) + return -EINVAL; + } else { + /* For 11a, Turbo and XR */ + ee_mode = AR5K_EEPROM_MODE_11A; + obdb = channel->freq >= 5725 ? 3 : + (channel->freq >= 5500 ? 2 : + (channel->freq >= 5260 ? 1 : + (channel->freq > 4000 ? 0 : -1))); + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_ob[ee_mode][obdb], 3, 279, 0, true)) + return -EINVAL; + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_ob[ee_mode][obdb], 3, 282, 0, true)) + return -EINVAL; + } + + ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_x_gain[ee_mode], 2, 270, 0, true); + ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_x_gain[ee_mode], 2, 257, 0, true); + + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], + ee->ee_xpd[ee_mode], 1, 302, 0, true)) + return -EINVAL; + + /* Modify bank 7 */ + if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], + ee->ee_i_gain[ee_mode], 6, 14, 0, true)) + return -EINVAL; + + /* Write RF values */ + for (i = 0; i < rf_size; i++) + ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); + + return 0; +} + +/* + * Initialize RF5413/5414 + */ +static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah, + struct ieee80211_channel *channel, unsigned int mode) +{ + const struct ath5k_ini_rf *rf_ini; + u32 *rf; + unsigned int rf_size, i; + int bank = -1; + + AR5K_ASSERT_ENTRY(mode, AR5K_INI_VAL_MAX); + + rf = ah->ah_rf_banks; + + rf_ini = rfregs_5413; + rf_size = ARRAY_SIZE(rfregs_5413); + + /* Copy values to modify them */ + for (i = 0; i < rf_size; i++) { + if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { + ATH5K_ERR(ah->ah_sc, "invalid bank\n"); + return -EINVAL; + } + + if (bank != rf_ini[i].rf_bank) { + bank = rf_ini[i].rf_bank; + ah->ah_offset[bank] = i; + } + + rf[i] = rf_ini[i].rf_value[mode]; + } + + /* + * After compairing dumps from different cards + * we get the same RF_BUFFER settings (diff returns + * 0 lines). It seems that RF_BUFFER settings are static + * and are written unmodified (no EEPROM stuff + * is used because calibration data would be + * different between different cards and would result + * different RF_BUFFER settings) + */ + + /* Write RF values */ + for (i = 0; i < rf_size; i++) + ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); + + return 0; +} + +/* + * Initialize RF + */ +int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, + unsigned int mode) +{ + int (*func)(struct ath5k_hw *, struct ieee80211_channel *, unsigned int); + int ret; + + switch (ah->ah_radio) { + case AR5K_RF5111: + ah->ah_rf_banks_size = sizeof(rfregs_5111); + func = ath5k_hw_rf5111_rfregs; + break; + case AR5K_RF5112: + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) + ah->ah_rf_banks_size = sizeof(rfregs_5112a); + else + ah->ah_rf_banks_size = sizeof(rfregs_5112); + func = ath5k_hw_rf5112_rfregs; + break; + case AR5K_RF5413: + ah->ah_rf_banks_size = sizeof(rfregs_5413); + func = ath5k_hw_rf5413_rfregs; + break; + default: + return -EINVAL; + } + + if (ah->ah_rf_banks == NULL) { + /* XXX do extra checks? */ + ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL); + if (ah->ah_rf_banks == NULL) { + ATH5K_ERR(ah->ah_sc, "out of memory\n"); + return -ENOMEM; + } + } + + ret = func(ah, channel, mode); + if (!ret) + ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE; + + return ret; +} + +int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq) +{ + const struct ath5k_ini_rfgain *ath5k_rfg; + unsigned int i, size; + + switch (ah->ah_radio) { + case AR5K_RF5111: + ath5k_rfg = rfgain_5111; + size = ARRAY_SIZE(rfgain_5111); + break; + case AR5K_RF5112: + ath5k_rfg = rfgain_5112; + size = ARRAY_SIZE(rfgain_5112); + break; + case AR5K_RF5413: + ath5k_rfg = rfgain_5413; + size = ARRAY_SIZE(rfgain_5413); + break; + default: + return -EINVAL; + } + + switch (freq) { + case AR5K_INI_RFGAIN_2GHZ: + case AR5K_INI_RFGAIN_5GHZ: + break; + default: + return -EINVAL; + } + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], + (u32)ath5k_rfg[i].rfg_register); + } + + return 0; +} + +enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah) +{ + u32 data, type; + + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active || + ah->ah_version <= AR5K_AR5211) + return AR5K_RFGAIN_INACTIVE; + + if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED) + goto done; + + data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); + + if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { + ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; + type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); + + if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) + ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR; + + if (ah->ah_radio >= AR5K_RF5112) { + ath5k_hw_rfregs_gainf_corr(ah); + ah->ah_gain.g_current = + ah->ah_gain.g_current>=ah->ah_gain.g_f_corr ? + (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : + 0; + } + + if (ath5k_hw_rfregs_gain_readback(ah) && + AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && + ath5k_hw_rfregs_gain_adjust(ah)) + ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE; + } + +done: + return ah->ah_rf_gain; +} + +int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah) +{ + /* Initialize the gain optimization values */ + switch (ah->ah_radio) { + case AR5K_RF5111: + ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; + ah->ah_gain.g_step = + &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx]; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 35; + ah->ah_gain.g_active = 1; + break; + case AR5K_RF5112: + case AR5K_RF5413: /* ??? */ + ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; + ah->ah_gain.g_step = + &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx]; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 85; + ah->ah_gain.g_active = 1; + break; + default: + return -EINVAL; + } + + return 0; +} + +/**************************\ + PHY/RF channel functions +\**************************/ + +/* + * Check if a channel is supported + */ +bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) +{ + /* Check if the channel is in our supported range */ + if (flags & CHANNEL_2GHZ) { + if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) + return true; + } else if (flags & CHANNEL_5GHZ) + if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) + return true; + + return false; +} + +/* + * Convertion needed for RF5110 + */ +static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) +{ + u32 athchan; + + /* + * Convert IEEE channel/MHz to an internal channel value used + * by the AR5210 chipset. This has not been verified with + * newer chipsets like the AR5212A who have a completely + * different RF/PHY part. + */ + athchan = (ath5k_hw_bitswap((channel->chan - 24) / 2, 5) << 1) | + (1 << 6) | 0x1; + + return athchan; +} + +/* + * Set channel on RF5110 + */ +static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data; + + /* + * Set the channel and wait + */ + data = ath5k_hw_rf5110_chan2athchan(channel); + ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); + mdelay(1); + + return 0; +} + +/* + * Convertion needed for 5111 + */ +static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, + struct ath5k_athchan_2ghz *athchan) +{ + int channel; + + /* Cast this value to catch negative channel numbers (>= -19) */ + channel = (int)ieee; + + /* + * Map 2GHz IEEE channel to 5GHz Atheros channel + */ + if (channel <= 13) { + athchan->a2_athchan = 115 + channel; + athchan->a2_flags = 0x46; + } else if (channel == 14) { + athchan->a2_athchan = 124; + athchan->a2_flags = 0x44; + } else if (channel >= 15 && channel <= 26) { + athchan->a2_athchan = ((channel - 14) * 4) + 132; + athchan->a2_flags = 0x46; + } else + return -EINVAL; + + return 0; +} + +/* + * Set channel on 5111 + */ +static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_athchan_2ghz ath5k_channel_2ghz; + unsigned int ath5k_channel = channel->chan; + u32 data0, data1, clock; + int ret; + + /* + * Set the channel on the RF5111 radio + */ + data0 = data1 = 0; + + if (channel->val & CHANNEL_2GHZ) { + /* Map 2GHz channel to 5GHz Atheros channel ID */ + ret = ath5k_hw_rf5111_chan2athchan(channel->chan, + &ath5k_channel_2ghz); + if (ret) + return ret; + + ath5k_channel = ath5k_channel_2ghz.a2_athchan; + data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff) + << 5) | (1 << 4); + } + + if (ath5k_channel < 145 || !(ath5k_channel & 1)) { + clock = 1; + data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) | + (clock << 1) | (1 << 10) | 1; + } else { + clock = 0; + data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff) + << 2) | (clock << 1) | (1 << 10) | 1; + } + + ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8), + AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00), + AR5K_RF_BUFFER_CONTROL_3); + + return 0; +} + +/* + * Set channel on 5112 and newer + */ +static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data, data0, data1, data2; + u16 c; + + data = data0 = data1 = data2 = 0; + c = channel->freq; + + /* + * Set the channel on the RF5112 or newer + */ + if (c < 4800) { + if (!((c - 2224) % 5)) { + data0 = ((2 * (c - 704)) - 3040) / 10; + data1 = 1; + } else if (!((c - 2192) % 5)) { + data0 = ((2 * (c - 672)) - 3040) / 10; + data1 = 0; + } else + return -EINVAL; + + data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); + } else { + if (!(c % 20) && c >= 5120) { + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + data2 = ath5k_hw_bitswap(3, 2); + } else if (!(c % 10)) { + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + data2 = ath5k_hw_bitswap(2, 2); + } else if (!(c % 5)) { + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + data2 = ath5k_hw_bitswap(1, 2); + } else + return -EINVAL; + } + + data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + +/* + * Set a channel on the radio chip + */ +int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) +{ + int ret; + + /* + * Check bounds supported by the PHY + * (don't care about regulation restrictions at this point) + */ + if ((channel->freq < ah->ah_capabilities.cap_range.range_2ghz_min || + channel->freq > ah->ah_capabilities.cap_range.range_2ghz_max) && + (channel->freq < ah->ah_capabilities.cap_range.range_5ghz_min || + channel->freq > ah->ah_capabilities.cap_range.range_5ghz_max)) { + ATH5K_ERR(ah->ah_sc, + "channel out of supported range (%u MHz)\n", + channel->freq); + return -EINVAL; + } + + /* + * Set the channel and wait + */ + switch (ah->ah_radio) { + case AR5K_RF5110: + ret = ath5k_hw_rf5110_channel(ah, channel); + break; + case AR5K_RF5111: + ret = ath5k_hw_rf5111_channel(ah, channel); + break; + default: + ret = ath5k_hw_rf5112_channel(ah, channel); + break; + } + + if (ret) + return ret; + + ah->ah_current_channel.freq = channel->freq; + ah->ah_current_channel.val = channel->val; + ah->ah_turbo = channel->val == CHANNEL_T ? true : false; + + return 0; +} + +/*****************\ + PHY calibration +\*****************/ + +/** + * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration + * + * @ah: struct ath5k_hw pointer we are operating on + * @freq: the channel frequency, just used for error logging + * + * This function performs a noise floor calibration of the PHY and waits for + * it to complete. Then the noise floor value is compared to some maximum + * noise floor we consider valid. + * + * Note that this is different from what the madwifi HAL does: it reads the + * noise floor and afterwards initiates the calibration. Since the noise floor + * calibration can take some time to finish, depending on the current channel + * use, that avoids the occasional timeout warnings we are seeing now. + * + * See the following link for an Atheros patent on noise floor calibration: + * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ + * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 + * + */ +int +ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) +{ + int ret; + unsigned int i; + s32 noise_floor; + + /* + * Enable noise floor calibration and wait until completion + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF, 0, false); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "noise floor calibration timeout (%uMHz)\n", freq); + return ret; + } + + /* Wait until the noise floor is calibrated and read the value */ + for (i = 20; i > 0; i--) { + mdelay(1); + noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF); + noise_floor = AR5K_PHY_NF_RVAL(noise_floor); + if (noise_floor & AR5K_PHY_NF_ACTIVE) { + noise_floor = AR5K_PHY_NF_AVAL(noise_floor); + + if (noise_floor <= AR5K_TUNE_NOISE_FLOOR) + break; + } + } + + ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE, + "noise floor %d\n", noise_floor); + + if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { + ATH5K_ERR(ah->ah_sc, + "noise floor calibration failed (%uMHz)\n", freq); + return -EIO; + } + + ah->ah_noise_floor = noise_floor; + + return 0; +} + +/* + * Perform a PHY calibration on RF5110 + * -Fix BPSK/QAM Constellation (I/Q correction) + * -Calculate Noise Floor + */ +static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 phy_sig, phy_agc, phy_sat, beacon; + int ret; + + /* + * Disable beacons and RX/TX queues, wait + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); + ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); + + udelay(2300); + + /* + * Set the channel (with AGC turned off) + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ret = ath5k_hw_channel(ah, channel); + + /* + * Activate PHY and wait + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + mdelay(1); + + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + if (ret) + return ret; + + /* + * Calibrate the radio chip + */ + + /* Remember normal state */ + phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG); + phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE); + phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT); + + /* Update radio registers */ + ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) | + AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG); + + ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI | + AR5K_PHY_AGCCOARSE_LO)) | + AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) | + AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE); + + ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT | + AR5K_PHY_ADCSAT_THR)) | + AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) | + AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT); + + udelay(20); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + mdelay(1); + + /* + * Enable calibration and wait until completion + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + + ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false); + + /* Reset to normal state */ + ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG); + ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE); + ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT); + + if (ret) { + ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + channel->freq); + return ret; + } + + ret = ath5k_hw_noise_floor_calibration(ah, channel->freq); + if (ret) + return ret; + + /* + * Re-enable RX/TX and beacons + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210); + + return 0; +} + +/* + * Perform a PHY calibration on RF5111/5112 + */ +static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 i_pwr, q_pwr; + s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_calibration == false || + ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) + goto done; + + ah->ah_calibration = false; + + iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); + i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); + q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); + i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; + q_coffd = q_pwr >> 6; + + if (i_coffd == 0 || q_coffd == 0) + goto done; + + i_coff = ((-iq_corr) / i_coffd) & 0x3f; + q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f; + + /* Commit new IQ value */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | + ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); + +done: + ath5k_hw_noise_floor_calibration(ah, channel->freq); + + /* Request RF gain */ + if (channel->val & CHANNEL_5GHZ) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max, + AR5K_PHY_PAPD_PROBE_TXPOWER) | + AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); + ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED; + } + + return 0; +} + +/* + * Perform a PHY calibration + */ +int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + int ret; + + if (ah->ah_radio == AR5K_RF5110) + ret = ath5k_hw_rf5110_calibrate(ah, channel); + else + ret = ath5k_hw_rf511x_calibrate(ah, channel); + + return ret; +} + +int ath5k_hw_phy_disable(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /*Just a try M.F.*/ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + + return 0; +} + +/********************\ + Misc PHY functions +\********************/ + +/* + * Get the PHY Chip revision + */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) +{ + unsigned int i; + u32 srev; + u16 ret; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Set the radio chip access register + */ + switch (chan) { + case CHANNEL_2GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); + break; + case CHANNEL_5GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + break; + default: + return 0; + } + + mdelay(2); + + /* ...wait until PHY is ready and read the selected radio revision */ + ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); + + for (i = 0; i < 8; i++) + ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); + + if (ah->ah_version == AR5K_AR5210) { + srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; + ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; + } else { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; + ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | + ((srev & 0x0f) << 4), 8); + } + + /* Reset to the 5GHz mode */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + return ret; +} + +void /*TODO:Boundary check*/ +ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant) +{ + ATH5K_TRACE(ah->ah_sc); + /*Just a try M.F.*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA); +} + +unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /*Just a try M.F.*/ + if (ah->ah_version != AR5K_AR5210) + return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + + return false; /*XXX: What do we return for 5210 ?*/ +} + +/* + * TX power setup + */ + +/* + * Initialize the tx power table (not fully implemented) + */ +static void ath5k_txpower_table(struct ath5k_hw *ah, + struct ieee80211_channel *channel, s16 max_power) +{ + unsigned int i, min, max, n; + u16 txpower, *rates; + + rates = ah->ah_txpower.txp_rates; + + txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2; + if (max_power > txpower) + txpower = max_power > AR5K_TUNE_MAX_TXPOWER ? + AR5K_TUNE_MAX_TXPOWER : max_power; + + for (i = 0; i < AR5K_MAX_RATES; i++) + rates[i] = txpower; + + /* XXX setup target powers by rate */ + + ah->ah_txpower.txp_min = rates[7]; + ah->ah_txpower.txp_max = rates[0]; + ah->ah_txpower.txp_ofdm = rates[0]; + + /* Calculate the power table */ + n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac); + min = AR5K_EEPROM_PCDAC_START; + max = AR5K_EEPROM_PCDAC_STOP; + for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP) + ah->ah_txpower.txp_pcdac[i] = +#ifdef notyet + min + ((i * (max - min)) / n); +#else + min; +#endif +} + +/* + * Set transmition power + */ +int /*O.K. - txpower_table is unimplemented so this doesn't work*/ +ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, + unsigned int txpower) +{ + bool tpc = ah->ah_txpower.txp_tpc; + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + if (txpower > AR5K_TUNE_MAX_TXPOWER) { + ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); + return -EINVAL; + } + + /* Reset TX power values */ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + ah->ah_txpower.txp_tpc = tpc; + + /* Initialize TX power table */ + ath5k_txpower_table(ah, channel, txpower); + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) | + (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff), + AR5K_PHY_PCDAC_TXPOWER(i)); + } + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | + AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | + AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) | + AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) | + AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) | + AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) | + AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) | + AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | + AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); + + if (ah->ah_txpower.txp_tpc == true) + ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | + AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + else + ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | + AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + + return 0; +} + +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) +{ + /*Just a try M.F.*/ + struct ieee80211_channel *channel = &ah->ah_current_channel; + + ATH5K_TRACE(ah->ah_sc); + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, + "changing txpower to %d\n", power); + + return ath5k_hw_txpower(ah, channel, power); +} diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h new file mode 100644 index 000000000000..2f41c8398602 --- /dev/null +++ b/drivers/net/wireless/ath5k/reg.h @@ -0,0 +1,1987 @@ +/* + * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k + * maintained by Reyk Floeter + * + * I tried to document those registers by looking at ar5k code, some + * 802.11 (802.11e mostly) papers and by reading various public available + * Atheros presentations and papers like these: + * + * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf + * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf + * + * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf + */ + + + +/*====MAC DMA REGISTERS====*/ + +/* + * AR5210-Specific TXDP registers + * 5210 has only 2 transmit queues so no DCU/QCU, just + * 2 transmit descriptor pointers... + */ +#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ +#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ + +/* + * Mac Control Register + */ +#define AR5K_CR 0x0008 /* Register Address */ +#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ +#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ +#define AR5K_CR_RXE 0x00000004 /* RX Enable */ +#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ +#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ +#define AR5K_CR_RXD 0x00000020 /* RX Disable */ +#define AR5K_CR_SWI 0x00000040 + +/* + * RX Descriptor Pointer register + */ +#define AR5K_RXDP 0x000c + +/* + * Configuration and status register + */ +#define AR5K_CFG 0x0014 /* Register Address */ +#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ +#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer (?) */ +#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ +#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer (?) */ +#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register values (?) */ +#define AR5K_CFG_ADHOC 0x00000020 /* [5211+] */ +#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ +#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ +#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (?) */ +#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ +#define AR5K_CFG_TXCNT_S 11 +#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ +#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ +#define AR5K_CFG_PCI_THRES 0x00060000 /* [5211+] */ +#define AR5K_CFG_PCI_THRES_S 17 + +/* + * Interrupt enable register + */ +#define AR5K_IER 0x0024 /* Register Address */ +#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ +#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ + + +/* + * 0x0028 is Beacon Control Register on 5210 + * and first RTS duration register on 5211 + */ + +/* + * Beacon control register [5210] + */ +#define AR5K_BCR 0x0028 /* Register Address */ +#define AR5K_BCR_AP 0x00000000 /* AP mode */ +#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ +#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ +#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ +#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ +#define AR5K_BCR_BCGET 0x00000010 + +/* + * First RTS duration register [5211] + */ +#define AR5K_RTSD0 0x0028 /* Register Address */ +#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ +#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ +#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ +#define AR5K_RTSD0_9_S 8 +#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ +#define AR5K_RTSD0_12_S 16 +#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ +#define AR5K_RTSD0_18_S 24 + + +/* + * 0x002c is Beacon Status Register on 5210 + * and second RTS duration register on 5211 + */ + +/* + * Beacon status register [5210] + * + * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR + * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning + * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). + * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what + * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. + */ +#define AR5K_BSR 0x002c /* Register Address */ +#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ +#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ +#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ +#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ +#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ +#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ +#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ +#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ +#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ +#define AR5K_BSR_SWBA_CNT 0x00ff0000 + +/* + * Second RTS duration register [5211] + */ +#define AR5K_RTSD1 0x002c /* Register Address */ +#define AR5K_RTSD1_24 0x000000ff /* 24Mb */ +#define AR5K_RTSD1_24_S 0 +#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ +#define AR5K_RTSD1_36_S 8 +#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ +#define AR5K_RTSD1_48_S 16 +#define AR5K_RTSD1_54 0xff000000 /* 54Mb */ +#define AR5K_RTSD1_54_S 24 + + +/* + * Transmit configuration register + */ +#define AR5K_TXCFG 0x0030 /* Register Address */ +#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size */ +#define AR5K_TXCFG_SDMAMR_S 0 +#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ +#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL_S 4 +#define AR5K_TXCFG_TXFULL_0B 0x00000000 +#define AR5K_TXCFG_TXFULL_64B 0x00000010 +#define AR5K_TXCFG_TXFULL_128B 0x00000020 +#define AR5K_TXCFG_TXFULL_192B 0x00000030 +#define AR5K_TXCFG_TXFULL_256B 0x00000040 +#define AR5K_TXCFG_TXCONT_EN 0x00000080 +#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ +#define AR5K_TXCFG_JUMBO_TXE 0x00000400 /* Enable jumbo frames transmition (?) [5211+] */ +#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ +#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ +#define AR5K_TXCFG_RDY_DIS 0x00004000 /* [5211+] */ + +/* + * Receive configuration register + */ +#define AR5K_RXCFG 0x0034 /* Register Address */ +#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size */ +#define AR5K_RXCFG_SDMAMW_S 0 +#define AR5K_RXCFG_DEF_ANTENNA 0x00000008 /* Default antenna */ +#define AR5K_RXCFG_ZLFDMA 0x00000010 /* Zero-length DMA */ +#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo frames reception (?) [5211+] */ +#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames (?) [5211+] */ + +/* + * Receive jumbo descriptor last address register + * Only found in 5211 (?) + */ +#define AR5K_RXJLA 0x0038 + +/* + * MIB control register + */ +#define AR5K_MIBC 0x0040 /* Register Address */ +#define AR5K_MIBC_COW 0x00000001 +#define AR5K_MIBC_FMC 0x00000002 /* Freeze Mib Counters (?) */ +#define AR5K_MIBC_CMC 0x00000004 /* Clean Mib Counters (?) */ +#define AR5K_MIBC_MCS 0x00000008 + +/* + * Timeout prescale register + */ +#define AR5K_TOPS 0x0044 +#define AR5K_TOPS_M 0x0000ffff /* [5211+] (?) */ + +/* + * Receive timeout register (no frame received) + */ +#define AR5K_RXNOFRM 0x0048 +#define AR5K_RXNOFRM_M 0x000003ff /* [5211+] (?) */ + +/* + * Transmit timeout register (no frame sent) + */ +#define AR5K_TXNOFRM 0x004c +#define AR5K_TXNOFRM_M 0x000003ff /* [5211+] (?) */ +#define AR5K_TXNOFRM_QCU 0x000ffc00 /* [5211+] (?) */ + +/* + * Receive frame gap timeout register + */ +#define AR5K_RPGTO 0x0050 +#define AR5K_RPGTO_M 0x000003ff /* [5211+] (?) */ + +/* + * Receive frame count limit register + */ +#define AR5K_RFCNT 0x0054 +#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ +#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ + +/* + * Misc settings register + */ +#define AR5K_MISC 0x0058 /* Register Address */ +#define AR5K_MISC_DMA_OBS_M 0x000001e0 +#define AR5K_MISC_DMA_OBS_S 5 +#define AR5K_MISC_MISC_OBS_M 0x00000e00 +#define AR5K_MISC_MISC_OBS_S 9 +#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 +#define AR5K_MISC_MAC_OBS_LSB_S 12 +#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 +#define AR5K_MISC_MAC_OBS_MSB_S 15 +#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ +#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ + +/* + * QCU/DCU clock gating register (5311) + */ +#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ +#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ +#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ + +/* + * Interrupt Status Registers + * + * For 5210 there is only one status register but for + * 5211/5212 we have one primary and 4 secondary registers. + * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. + * Most of these bits are common for all chipsets. + */ +#define AR5K_ISR 0x001c /* Register Address [5210] */ +#define AR5K_PISR 0x0080 /* Register Address [5211+] */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ +#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ +#define AR5K_ISR_RXERR 0x00000004 /* Receive error */ +#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ +#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ +#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ +#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ +#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ +#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ +#define AR5K_ISR_SWI 0x00002000 /* Software interrupt (?) */ +#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ +#define AR5K_ISR_RXKCM 0x00008000 +#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ +#define AR5K_ISR_BRSSI 0x00020000 +#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ +#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_ISR_MCABT 0x00100000 /* [5210] */ +#define AR5K_ISR_RXCHIRP 0x00200000 /* [5212+] */ +#define AR5K_ISR_SSERR 0x00200000 /* [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* [5210] */ +#define AR5K_ISR_TIM 0x00800000 /* [5210] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */ +#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/ +#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ +#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ +#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */ + +/* + * Secondary status registers [5211+] (0 - 4) + * + * I guess from the names that these give the status for each + * queue, that's why only masks are defined here, haven't got + * any info about them (couldn't find them anywhere in ar5k code). + */ +#define AR5K_SISR0 0x0084 /* Register Address [5211+] */ +#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ + +#define AR5K_SISR1 0x0088 /* Register Address [5211+] */ +#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ + +#define AR5K_SISR2 0x008c /* Register Address [5211+] */ +#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SISR2_MCABT 0x00100000 +#define AR5K_SISR2_SSERR 0x00200000 +#define AR5K_SISR2_DPERR 0x00400000 +#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* [5212+] */ +#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ +#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ + +#define AR5K_SISR3 0x0090 /* Register Address [5211+] */ +#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ + +#define AR5K_SISR4 0x0094 /* Register Address [5211+] */ +#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ + +/* + * Shadow read-and-clear interrupt status registers [5211+] + */ +#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ +#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ +#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ +#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ +#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ +#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ + +/* + * Interrupt Mask Registers + * + * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. + */ +#define AR5K_IMR 0x0020 /* Register Address [5210] */ +#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ +#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ +#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ +#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ +#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ +#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ +#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ +#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ +#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ +#define AR5K_IMR_SWI 0x00002000 +#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ +#define AR5K_IMR_RXKCM 0x00008000 +#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ +#define AR5K_IMR_BRSSI 0x00020000 +#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ +#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_IMR_MCABT 0x00100000 /* [5210] */ +#define AR5K_IMR_RXCHIRP 0x00200000 /* [5212+]*/ +#define AR5K_IMR_SSERR 0x00200000 /* [5210] */ +#define AR5K_IMR_DPERR 0x00400000 /* [5210] */ +#define AR5K_IMR_TIM 0x00800000 /* [5211+] */ +#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */ +#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ +#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */ +#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */ +#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */ + +/* + * Secondary interrupt mask registers [5211+] (0 - 4) + */ +#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ +#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SIMR0_QCU_TXOK_S 0 +#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SIMR0_QCU_TXDESC_S 16 + +#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ +#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SIMR1_QCU_TXERR_S 0 +#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SIMR1_QCU_TXEOL_S 16 + +#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ +#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SIMR2_QCU_TXURN_S 0 +#define AR5K_SIMR2_MCABT 0x00100000 +#define AR5K_SIMR2_SSERR 0x00200000 +#define AR5K_SIMR2_DPERR 0x00400000 +#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* [5212+] */ +#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ +#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ + +#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ +#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SIMR3_QCBRORN_S 0 +#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SIMR3_QCBRURN_S 16 + +#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ +#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SIMR4_QTRIG_S 0 + + +/* + * Decompression mask registers [5212+] + */ +#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (?)*/ +#define AR5K_DCM_DATA 0x0404 /*Decompression mask data (?)*/ + +/* + * Decompression configuration registers [5212+] + */ +#define AR5K_DCCFG 0x0420 + +/* + * Compression configuration registers [5212+] + */ +#define AR5K_CCFG 0x0600 +#define AR5K_CCFG_CUP 0x0604 + +/* + * Compression performance counter registers [5212+] + */ +#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ +#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ +#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ +#define AR5K_CPC3 0x061c /* Compression performance counter 3 */ +#define AR5K_CPCORN 0x0620 /* Compression performance overrun (?) */ + + +/* + * Queue control unit (QCU) registers [5211+] + * + * Card has 12 TX Queues but i see that only 0-9 are used (?) + * both in binary HAL (see ah.h) and ar5k. Each queue has it's own + * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) + * configuration register (0x08c0 - 0x08ec), a ready time configuration + * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - + * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some + * global registers, QCU transmit enable/disable and "one shot arm (?)" + * set/clear, which contain status for all queues (we shift by 1 for each + * queue). To access these registers easily we define some macros here + * that are used inside HAL. For more infos check out *_tx_queue functs. + * + * TODO: Boundary checking on macros (here?) + */ + +/* + * Generic QCU Register access macros + */ +#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) +#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) +#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) + +/* + * QCU Transmit descriptor pointer registers + */ +#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ +#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) + +/* + * QCU Transmit enable register + */ +#define AR5K_QCU_TXE 0x0840 +#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) +#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) + +/* + * QCU Transmit disable register + */ +#define AR5K_QCU_TXD 0x0880 +#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) +#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) + +/* + * QCU Constant Bit Rate configuration registers + */ +#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ +#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ +#define AR5K_QCU_CBRCFG_INTVAL_S 0 +#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ +#define AR5K_QCU_CBRCFG_ORN_THRES_S 24 +#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) + +/* + * QCU Ready time configuration registers + */ +#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ +#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ +#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 +#define AR5K_QCU_RDYTIMECFG_DURATION 0x00ffffff /* Ready time duration mask */ +#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ +#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) + +/* + * QCU one shot arm set registers + */ +#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ +#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff + +/* + * QCU one shot arm clear registers + */ +#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ +#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff + +/* + * QCU misc registers + */ +#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ +#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ +#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */ +#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ +#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */ +#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */ +#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Beacons enabled */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled (?) */ +#define AR5K_QCU_MISC_TXE 0x00000200 /* TXE reset when RDYTIME enalbed (?) */ +#define AR5K_QCU_MISC_CBR 0x00000400 /* CBR threshold reset (?) */ +#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU reset (?) */ +#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) + + +/* + * QCU status registers + */ +#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ +#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ +#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter (?) */ +#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) + +/* + * QCU ready time shutdown register + */ +#define AR5K_QCU_RDYTIMESHDN 0x0a40 +#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff + +/* + * QCU compression buffer base registers [5212+] + */ +#define AR5K_QCU_CBB_SELECT 0x0b00 +#define AR5K_QCU_CBB_ADDR 0x0b04 + +/* + * QCU compression buffer configuration register [5212+] + */ +#define AR5K_QCU_CBCFG 0x0b08 + + + +/* + * Distributed Coordination Function (DCF) control unit (DCU) + * registers [5211+] + * + * These registers control the various characteristics of each queue + * for 802.11e (WME) combatibility so they go together with + * QCU registers in pairs. For each queue we have a QCU mask register, + * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), + * a retry limit register (0x1080 - 0x10ac), a channel time register + * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and + * a sequence number register (0x1140 - 0x116c). It seems that "global" + * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * We use the same macros here for easier register access. + * + */ + +/* + * DCU QCU mask registers + */ +#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ +#define AR5K_DCU_QCUMASK_M 0x000003ff +#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) + +/* + * DCU local Inter Frame Space settings register + */ +#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ +#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MIN_S 0 +#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MAX_S 10 +#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ +#define AR5K_DCU_LCL_IFS_AIFS_S 20 +#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) + +/* + * DCU retry limit registers + */ +#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ +#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ +#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0 +#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */ +#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4 +#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */ +#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8 +#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */ +#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) + +/* + * DCU channel time registers + */ +#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ +#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ +#define AR5K_DCU_CHAN_TIME_DUR_S 0 +#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ +#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) + +/* + * DCU misc registers [5211+] + * + * For some of the registers i couldn't find in the code + * (only backoff stuff is there realy) i tried to match the + * names with 802.11e parameters etc, so i guess VIRTCOL here + * means Virtual Collision and HCFPOLL means Hybrid Coordination + * factor Poll (CF- Poll). Arbiter lockout control controls the + * behaviour on low priority queues when we have multiple queues + * with pending frames. Intra-frame lockout means we wait until + * the queue's current frame transmits (with post frame backoff and bursting) + * before we transmit anything else and global lockout means we + * wait for the whole queue to finish before higher priority queues + * can transmit (this is used on beacon and CAB queues). + * No lockout means there is no special handling. + */ +#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ +#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff setting (?) */ +#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ +#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll (?) */ +#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff (?) */ +#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch (?) */ +#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 +#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Beacon enable (?) */ +#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 +#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ +#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 +#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment (?) */ +#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff (?) */ +#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision policy (?) */ +#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 +#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ +#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) + +/* + * DCU frame sequence number registers + */ +#define AR5K_DCU_SEQNUM_BASE 0x1140 +#define AR5K_DCU_SEQNUM_M 0x00000fff +#define AR5K_QUEUE_DFS_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) + +/* + * DCU global IFS SIFS registers + */ +#define AR5K_DCU_GBL_IFS_SIFS 0x1030 +#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff + +/* + * DCU global IFS slot interval registers + */ +#define AR5K_DCU_GBL_IFS_SLOT 0x1070 +#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff + +/* + * DCU global IFS EIFS registers + */ +#define AR5K_DCU_GBL_IFS_EIFS 0x10b0 +#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff + +/* + * DCU global IFS misc registers + */ +#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ +#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 +#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode (?) */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask (?) */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 +#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 + +/* + * DCU frame prefetch control register + */ +#define AR5K_DCU_FP 0x1230 + +/* + * DCU transmit pause control/status register + */ +#define AR5K_DCU_TXP 0x1270 /* Register Address */ +#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask (?) */ +#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status (?) */ + +/* + * DCU transmit filter register + */ +#define AR5K_DCU_TX_FILTER 0x1038 + +/* + * DCU clear transmit filter register + */ +#define AR5K_DCU_TX_FILTER_CLR 0x143c + +/* + * DCU set transmit filter register + */ +#define AR5K_DCU_TX_FILTER_SET 0x147c + +/* + * Reset control register + * + * 4 and 8 are not used in 5211/5212 and + * 2 means "baseband reset" on 5211/5212. + */ +#define AR5K_RESET_CTL 0x4000 /* Register Address */ +#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ +#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ +#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ +#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ +#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ +#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ +#define AR5K_RESET_CTL_CHIP (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA | \ + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY) + +/* + * Sleep control register + */ +#define AR5K_SLEEP_CTL 0x4004 /* Register Address */ +#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ +#define AR5K_SLEEP_CTL_SLDUR_S 0 +#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ +#define AR5K_SLEEP_CTL_SLE_S 16 +#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ +#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ +#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 +#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ + +/* + * Interrupt pending register + */ +#define AR5K_INTPEND 0x4008 +#define AR5K_INTPEND_M 0x00000001 + +/* + * Sleep force register + */ +#define AR5K_SFR 0x400c +#define AR5K_SFR_M 0x00000001 + +/* + * PCI configuration register + */ +#define AR5K_PCICFG 0x4010 /* Register Address */ +#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ +#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ +#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ +#define AR5K_PCICFG_EESIZE_S 3 +#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ +#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ +#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ +#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */ +#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ +#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ +#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ +#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ +#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ +#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */ +#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */ +#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ +#define AR5K_PCICFG_SL_INPEN 0x00002800 /* Sleep even whith pending interrupts (?) */ +#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ +#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ +#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ +#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ +#define AR5K_PCICFG_LEDBLINK 0x00700000 +#define AR5K_PCICFG_LEDBLINK_S 20 +#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slow led blink rate (?) [5211+] */ +#define AR5K_PCICFG_LEDSTATE \ + (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ + AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) + +/* + * "General Purpose Input/Output" (GPIO) control register + * + * I'm not sure about this but after looking at the code + * for all chipsets here is what i got. + * + * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) + * Mode 0 -> always input + * Mode 1 -> output when GPIODO for this GPIO is set to 0 + * Mode 2 -> output when GPIODO for this GPIO is set to 1 + * Mode 3 -> always output + * + * For more infos check out get_gpio/set_gpio and + * set_gpio_input/set_gpio_output functs. + * For more infos on gpio interrupt check out set_gpio_intr. + */ +#define AR5K_NUM_GPIO 6 + +#define AR5K_GPIOCR 0x4014 /* Register Address */ +#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ +#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */ +#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */ +#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ +#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ +#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ +#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ +#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ + +/* + * "General Purpose Input/Output" (GPIO) data output register + */ +#define AR5K_GPIODO 0x4018 + +/* + * "General Purpose Input/Output" (GPIO) data input register + */ +#define AR5K_GPIODI 0x401c +#define AR5K_GPIODI_M 0x0000002f + + +/* + * Silicon revision register + */ +#define AR5K_SREV 0x4020 /* Register Address */ +#define AR5K_SREV_REV 0x0000000f /* Mask for revision */ +#define AR5K_SREV_REV_S 0 +#define AR5K_SREV_VER 0x000000ff /* Mask for version */ +#define AR5K_SREV_VER_S 4 + + + +/*====EEPROM REGISTERS====*/ + +/* + * EEPROM access registers + * + * Here we got a difference between 5210/5211-12 + * read data register for 5210 is at 0x6800 and + * status register is at 0x6c00. There is also + * no eeprom command register on 5210 and the + * offsets are different. + * + * To read eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * read AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * and read eeprom data register. + * + * 5211 - write offset to AR5K_EEPROM_BASE + * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD + * check the eeprom status register + * and read eeprom data register. + * + * To write eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * write data to AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD + * 5212 write offset to AR5K_EEPROM_BASE + * write data to data register + * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD + * check the eeprom status register + * + * For more infos check eeprom_* functs and the ar5k.c + * file posted in madwifi-devel mailing list. + * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 + * + */ +#define AR5K_EEPROM_BASE 0x6000 + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ +#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ +#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ +#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x3007 + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ + +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 0x00c4 +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) +#define AR5K_EEPROM_MISC1 0x00c5 +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) + +/* + * EEPROM data register + */ +#define AR5K_EEPROM_DATA_5211 0x6004 +#define AR5K_EEPROM_DATA_5210 0x6800 +#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) + +/* + * EEPROM command register + */ +#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ +#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ +#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ +#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ + +/* + * EEPROM status register + */ +#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ +#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ +#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) +#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ +#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ +#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ +#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ + +/* + * EEPROM config register (?) + */ +#define AR5K_EEPROM_CFG 0x6010 + + + +/* + * Protocol Control Unit (PCU) registers + */ +/* + * Used for checking initial register writes + * during channel reset (see reset func) + */ +#define AR5K_PCU_MIN 0x8000 +#define AR5K_PCU_MAX 0x8fff + +/* + * First station id register (MAC address in lower 32 bits) + */ +#define AR5K_STA_ID0 0x8000 + +/* + * Second station id register (MAC address in upper 16 bits) + */ +#define AR5K_STA_ID1 0x8004 /* Register Address */ +#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ +#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ +#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting (?) */ +#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ +#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ +#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ +#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ +#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ + AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) +#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ +#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ +#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS (?) */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS (?) */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */ + +/* + * First BSSID register (MAC address, lower 32bits) + */ +#define AR5K_BSS_ID0 0x8008 + +/* + * Second BSSID register (MAC address in upper 16 bits) + * + * AID: Association ID + */ +#define AR5K_BSS_ID1 0x800c +#define AR5K_BSS_ID1_AID 0xffff0000 +#define AR5K_BSS_ID1_AID_S 16 + +/* + * Backoff slot time register + */ +#define AR5K_SLOT_TIME 0x8010 + +/* + * ACK/CTS timeout register + */ +#define AR5K_TIME_OUT 0x8014 /* Register Address */ +#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ +#define AR5K_TIME_OUT_ACK_S 0 +#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ +#define AR5K_TIME_OUT_CTS_S 16 + +/* + * RSSI threshold register + */ +#define AR5K_RSSI_THR 0x8018 /* Register Address */ +#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ +#define AR5K_RSSI_THR_BMISS_5210_S 8 +#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5211_S 8 +#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) +#define AR5K_RSSI_THR_BMISS_S 8 + +/* + * 5210 has more PCU registers because there is no QCU/DCU + * so queue parameters are set here, this way a lot common + * registers have different address for 5210. To make things + * easier we define a macro based on ah->ah_version for common + * registers with different addresses and common flags. + */ + +/* + * Retry limit register + * + * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) + */ +#define AR5K_NODCU_RETRY_LMT 0x801c /*Register Address */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 +#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ +#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ +#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 + +/* + * Transmit latency register + */ +#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ +#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ +#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ + AR5K_USEC_5210 : AR5K_USEC_5211) +#define AR5K_USEC_1 0x0000007f +#define AR5K_USEC_1_S 0 +#define AR5K_USEC_32 0x00003f80 +#define AR5K_USEC_32_S 7 +#define AR5K_USEC_TX_LATENCY_5211 0x007fc000 +#define AR5K_USEC_TX_LATENCY_5211_S 14 +#define AR5K_USEC_RX_LATENCY_5211 0x1f800000 +#define AR5K_USEC_RX_LATENCY_5211_S 23 +#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ +#define AR5K_USEC_TX_LATENCY_5210_S 14 +#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ +#define AR5K_USEC_RX_LATENCY_5210_S 20 + +/* + * PCU beacon control register + */ +#define AR5K_BEACON_5210 0x8024 +#define AR5K_BEACON_5211 0x8020 +#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_5210 : AR5K_BEACON_5211) +#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_PERIOD_S 0 +#define AR5K_BEACON_TIM 0x007f0000 +#define AR5K_BEACON_TIM_S 16 +#define AR5K_BEACON_ENABLE 0x00800000 +#define AR5K_BEACON_RESET_TSF 0x01000000 + +/* + * CFP period register + */ +#define AR5K_CFP_PERIOD_5210 0x8028 +#define AR5K_CFP_PERIOD_5211 0x8024 +#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) + +/* + * Next beacon time register + */ +#define AR5K_TIMER0_5210 0x802c +#define AR5K_TIMER0_5211 0x8028 +#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER0_5210 : AR5K_TIMER0_5211) + +/* + * Next DMA beacon alert register + */ +#define AR5K_TIMER1_5210 0x8030 +#define AR5K_TIMER1_5211 0x802c +#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER1_5210 : AR5K_TIMER1_5211) + +/* + * Next software beacon alert register + */ +#define AR5K_TIMER2_5210 0x8034 +#define AR5K_TIMER2_5211 0x8030 +#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER2_5210 : AR5K_TIMER2_5211) + +/* + * Next ATIM window time register + */ +#define AR5K_TIMER3_5210 0x8038 +#define AR5K_TIMER3_5211 0x8034 +#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER3_5210 : AR5K_TIMER3_5211) + + +/* + * 5210 First inter frame spacing register (IFS) + */ +#define AR5K_IFS0 0x8040 +#define AR5K_IFS0_SIFS 0x000007ff +#define AR5K_IFS0_SIFS_S 0 +#define AR5K_IFS0_DIFS 0x007ff800 +#define AR5K_IFS0_DIFS_S 11 + +/* + * 5210 Second inter frame spacing register (IFS) + */ +#define AR5K_IFS1 0x8044 +#define AR5K_IFS1_PIFS 0x00000fff +#define AR5K_IFS1_PIFS_S 0 +#define AR5K_IFS1_EIFS 0x03fff000 +#define AR5K_IFS1_EIFS_S 12 +#define AR5K_IFS1_CS_EN 0x04000000 + + +/* + * CFP duration register + */ +#define AR5K_CFP_DUR_5210 0x8048 +#define AR5K_CFP_DUR_5211 0x8038 +#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) + +/* + * Receive filter register + * TODO: Get these out of ar5xxx.h on ath5k + */ +#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ +#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ +#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) +#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ +#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ +#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ +#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ +#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ +#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ +#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ +#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ +#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ +#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ +#define AR5K_RX_FILTER_PHYERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) +#define AR5K_RX_FILTER_RADARERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) + +/* + * Multicast filter register (lower 32 bits) + */ +#define AR5K_MCAST_FILTER0_5210 0x8050 +#define AR5K_MCAST_FILTER0_5211 0x8040 +#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) + +/* + * Multicast filter register (higher 16 bits) + */ +#define AR5K_MCAST_FILTER1_5210 0x8054 +#define AR5K_MCAST_FILTER1_5211 0x8044 +#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) + + +/* + * Transmit mask register (lower 32 bits) [5210] + */ +#define AR5K_TX_MASK0 0x8058 + +/* + * Transmit mask register (higher 16 bits) [5210] + */ +#define AR5K_TX_MASK1 0x805c + +/* + * Clear transmit mask [5210] + */ +#define AR5K_CLR_TMASK 0x8060 + +/* + * Trigger level register (before transmission) [5210] + */ +#define AR5K_TRIG_LVL 0x8064 + + +/* + * PCU control register + * + * Only DIS_RX is used in the code, the rest i guess are + * for tweaking/diagnostics. + */ +#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ +#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ +#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) +#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 +#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs (?) */ +#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs (?) */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption (?) */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption (?) */ +#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ +#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ +#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 +#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) +#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */ +#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 +#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 +#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 +#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 +#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 +#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Scrambler seed (?) */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 +#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) +#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ +#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ +#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask (?) */ +#define AR5K_DIAG_SW_SCRAM_SEED_S 10 +#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ +#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 +#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 +#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) +#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 +#define AR5K_DIAG_SW_OBSPT_S 18 + +/* + * TSF (clock) register (lower 32 bits) + */ +#define AR5K_TSF_L32_5210 0x806c +#define AR5K_TSF_L32_5211 0x804c +#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) + +/* + * TSF (clock) register (higher 32 bits) + */ +#define AR5K_TSF_U32_5210 0x8070 +#define AR5K_TSF_U32_5211 0x8050 +#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) + +/* + * Last beacon timestamp register + */ +#define AR5K_LAST_TSTP 0x8080 + +/* + * ADDAC test register [5211+] + */ +#define AR5K_ADDAC_TEST 0x8054 +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 + +/* + * Default antenna register [5211+] + */ +#define AR5K_DEFAULT_ANTENNA 0x8058 + + + +/* + * Retry count register [5210] + */ +#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ +#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ +#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ + +/* + * Back-off status register [5210] + */ +#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ +#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ +#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ + + + +/* + * NAV register (current) + */ +#define AR5K_NAV_5210 0x808c +#define AR5K_NAV_5211 0x8084 +#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ + AR5K_NAV_5210 : AR5K_NAV_5211) + +/* + * RTS success register + */ +#define AR5K_RTS_OK_5210 0x8090 +#define AR5K_RTS_OK_5211 0x8088 +#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) + +/* + * RTS failure register + */ +#define AR5K_RTS_FAIL_5210 0x8094 +#define AR5K_RTS_FAIL_5211 0x808c +#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) + +/* + * ACK failure register + */ +#define AR5K_ACK_FAIL_5210 0x8098 +#define AR5K_ACK_FAIL_5211 0x8090 +#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) + +/* + * FCS failure register + */ +#define AR5K_FCS_FAIL_5210 0x809c +#define AR5K_FCS_FAIL_5211 0x8094 +#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) + +/* + * Beacon count register + */ +#define AR5K_BEACON_CNT_5210 0x80a0 +#define AR5K_BEACON_CNT_5211 0x8098 +#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) + + +/*===5212 Specific PCU registers===*/ + +/* + * XR (eXtended Range) mode register + */ +#define AR5K_XRMODE 0x80c0 +#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f +#define AR5K_XRMODE_POLL_TYPE_S 0 +#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c +#define AR5K_XRMODE_POLL_SUBTYPE_S 2 +#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 +#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 +#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 +#define AR5K_XRMODE_FRAME_HOLD_S 20 + +/* + * XR delay register + */ +#define AR5K_XRDELAY 0x80c4 +#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff +#define AR5K_XRDELAY_SLOT_DELAY_S 0 +#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 +#define AR5K_XRDELAY_CHIRP_DELAY_S 16 + +/* + * XR timeout register + */ +#define AR5K_XRTIMEOUT 0x80c8 +#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff +#define AR5K_XRTIMEOUT_CHIRP_S 0 +#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 +#define AR5K_XRTIMEOUT_POLL_S 16 + +/* + * XR chirp register + */ +#define AR5K_XRCHIRP 0x80cc +#define AR5K_XRCHIRP_SEND 0x00000001 +#define AR5K_XRCHIRP_GAP 0xffff0000 + +/* + * XR stomp register + */ +#define AR5K_XRSTOMP 0x80d0 +#define AR5K_XRSTOMP_TX 0x00000001 +#define AR5K_XRSTOMP_RX_ABORT 0x00000002 +#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 + +/* + * First enhanced sleep register + */ +#define AR5K_SLEEP0 0x80d4 +#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff +#define AR5K_SLEEP0_NEXT_DTIM_S 0 +#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 +#define AR5K_SLEEP0_CABTO 0xff000000 +#define AR5K_SLEEP0_CABTO_S 24 + +/* + * Second enhanced sleep register + */ +#define AR5K_SLEEP1 0x80d8 +#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff +#define AR5K_SLEEP1_NEXT_TIM_S 0 +#define AR5K_SLEEP1_BEACON_TO 0xff000000 +#define AR5K_SLEEP1_BEACON_TO_S 24 + +/* + * Third enhanced sleep register + */ +#define AR5K_SLEEP2 0x80dc +#define AR5K_SLEEP2_TIM_PER 0x0000ffff +#define AR5K_SLEEP2_TIM_PER_S 0 +#define AR5K_SLEEP2_DTIM_PER 0xffff0000 +#define AR5K_SLEEP2_DTIM_PER_S 16 + +/* + * BSSID mask registers + */ +#define AR5K_BSS_IDM0 0x80e0 +#define AR5K_BSS_IDM1 0x80e4 + +/* + * TX power control (TPC) register + */ +#define AR5K_TXPC 0x80e8 +#define AR5K_TXPC_ACK_M 0x0000003f +#define AR5K_TXPC_ACK_S 0 +#define AR5K_TXPC_CTS_M 0x00003f00 +#define AR5K_TXPC_CTS_S 8 +#define AR5K_TXPC_CHIRP_M 0x003f0000 +#define AR5K_TXPC_CHIRP_S 22 + +/* + * Profile count registers + */ +#define AR5K_PROFCNT_TX 0x80ec +#define AR5K_PROFCNT_RX 0x80f0 +#define AR5K_PROFCNT_RXCLR 0x80f4 +#define AR5K_PROFCNT_CYCLE 0x80f8 + +/* + * TSF parameter register + */ +#define AR5K_TSF_PARM 0x8104 +#define AR5K_TSF_PARM_INC_M 0x000000ff +#define AR5K_TSF_PARM_INC_S 0 + +/* + * PHY error filter register + */ +#define AR5K_PHY_ERR_FIL 0x810c +#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 +#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 +#define AR5K_PHY_ERR_FIL_CCK 0x02000000 + +/* + * Rate duration register + */ +#define AR5K_RATE_DUR_BASE 0x8700 +#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) + +/*===5212 end===*/ + +/* + * Key table (WEP) register + */ +#define AR5K_KEYTABLE_0_5210 0x9000 +#define AR5K_KEYTABLE_0_5211 0x8800 +#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5)) +#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5)) +#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \ + AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n)) +#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2)) +#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5) +#define AR5K_KEYTABLE_TYPE_40 0x00000000 +#define AR5K_KEYTABLE_TYPE_104 0x00000001 +#define AR5K_KEYTABLE_TYPE_128 0x00000003 +#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */ +#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */ +#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */ +#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */ +#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */ +#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6) +#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7) +#define AR5K_KEYTABLE_VALID 0x00008000 + +/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit + * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit + * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit + * + * Some vendors have introduced bigger WEP keys to address + * security vulnerabilities in WEP. This includes: + * + * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit + * + * We can expand this if we find ar5k Atheros cards with a larger + * key table size. + */ +#define AR5K_KEYTABLE_SIZE_5210 64 +#define AR5K_KEYTABLE_SIZE_5211 128 +#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \ + AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211) + + +/*===PHY REGISTERS===*/ + +/* + * PHY register + */ +#define AR5K_PHY_BASE 0x9800 +#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) +#define AR5K_PHY_SHIFT_2GHZ 0x00004007 +#define AR5K_PHY_SHIFT_5GHZ 0x00000007 + +/* + * PHY frame control register [5110] /turbo mode register [5111+] + * + * There is another frame control register for [5111+] + * at address 0x9944 (see below) but the 2 first flags + * are common here between 5110 frame control register + * and [5111+] turbo mode register, so this also works as + * a "turbo mode register" for 5110. We treat this one as + * a frame control register for 5110 below. + */ +#define AR5K_PHY_TURBO 0x9804 +#define AR5K_PHY_TURBO_MODE 0x00000001 +#define AR5K_PHY_TURBO_SHORT 0x00000002 + +/* + * PHY agility command register + */ +#define AR5K_PHY_AGC 0x9808 +#define AR5K_PHY_AGC_DISABLE 0x08000000 + +/* + * PHY timing register [5112+] + */ +#define AR5K_PHY_TIMING_3 0x9814 +#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 +#define AR5K_PHY_TIMING_3_DSC_MAN_S 17 +#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 +#define AR5K_PHY_TIMING_3_DSC_EXP_S 13 + +/* + * PHY chip revision register + */ +#define AR5K_PHY_CHIP_ID 0x9818 + +/* + * PHY activation register + */ +#define AR5K_PHY_ACT 0x981c +#define AR5K_PHY_ACT_ENABLE 0x00000001 +#define AR5K_PHY_ACT_DISABLE 0x00000002 + +/* + * PHY signal register + */ +#define AR5K_PHY_SIG 0x9858 +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 +#define AR5K_PHY_SIG_FIRSTEP_S 12 +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 +#define AR5K_PHY_SIG_FIRPWR_S 18 + +/* + * PHY coarse agility control register + */ +#define AR5K_PHY_AGCCOARSE 0x985c +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 +#define AR5K_PHY_AGCCOARSE_LO_S 7 +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 +#define AR5K_PHY_AGCCOARSE_HI_S 15 + +/* + * PHY agility control register + */ +#define AR5K_PHY_AGCCTL 0x9860 /* Register address */ +#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ +#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ + +/* + * PHY noise floor status register + */ +#define AR5K_PHY_NF 0x9864 +#define AR5K_PHY_NF_M 0x000001ff +#define AR5K_PHY_NF_ACTIVE 0x00000100 +#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) +#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) +#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) + +/* + * PHY ADC saturation register [5110] + */ +#define AR5K_PHY_ADCSAT 0x9868 +#define AR5K_PHY_ADCSAT_ICNT 0x0001f800 +#define AR5K_PHY_ADCSAT_ICNT_S 11 +#define AR5K_PHY_ADCSAT_THR 0x000007e0 +#define AR5K_PHY_ADCSAT_THR_S 5 + +/* + * PHY sleep registers [5112+] + */ +#define AR5K_PHY_SCR 0x9870 +#define AR5K_PHY_SCR_32MHZ 0x0000001f +#define AR5K_PHY_SLMT 0x9874 +#define AR5K_PHY_SLMT_32MHZ 0x0000007f +#define AR5K_PHY_SCAL 0x9878 +#define AR5K_PHY_SCAL_32MHZ 0x0000000e + +/* + * PHY PLL (Phase Locked Loop) control register + */ +#define AR5K_PHY_PLL 0x987c +#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */ +#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */ +#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa +#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) +#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */ +#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab +#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) +#define AR5K_PHY_PLL_RF5111 0x00000000 +#define AR5K_PHY_PLL_RF5112 0x00000040 + +/* + * RF Buffer register + * + * There are some special control registers on the RF chip + * that hold various operation settings related mostly to + * the analog parts (channel, gain adjustment etc). + * + * We don't write on those registers directly but + * we send a data packet on the buffer register and + * then write on another special register to notify hw + * to apply the settings. This is done so that control registers + * can be dynamicaly programmed during operation and the settings + * are applied faster on the hw. + * + * We sent such data packets during rf initialization and channel change + * through ath5k_hw_rf*_rfregs and ath5k_hw_rf*_channel functions. + * + * The data packets we send during initializadion are inside ath5k_ini_rf + * struct (see ath5k_hw.h) and each one is related to an "rf register bank". + * We use *rfregs functions to modify them acording to current operation + * mode and eeprom values and pass them all together to the chip. + * + * It's obvious from the code that 0x989c is the buffer register but + * for the other special registers that we write to after sending each + * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * for now. It's interesting that they are also used for some other operations. + * + * Also check out hw.h and U.S. Patent 6677779 B1 (about buffer + * registers and control registers): + * + * http://www.google.com/patents?id=qNURAAAAEBAJ + */ + +#define AR5K_RF_BUFFER 0x989c +#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ +#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ +#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ + /* Channel set on 5111 */ + /* Used to read radio revision*/ + +#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ + /* Bank 0,1,2,6 on 5111 */ + /* Bank 1 on 5112 */ + /* Used during activation on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ + /* Used during activation on 5111 */ + /* Channel on 5112 */ + /* Bank 6 on 5112 */ + +#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ + +/* + * PHY RF stage register [5210] + */ +#define AR5K_PHY_RFSTG 0x98d4 +#define AR5K_PHY_RFSTG_DISABLE 0x00000021 + +/* + * PHY receiver delay register [5111+] + */ +#define AR5K_PHY_RX_DELAY 0x9914 +#define AR5K_PHY_RX_DELAY_M 0x00003fff + +/* + * PHY timing I(nphase) Q(adrature) control register [5111+] + */ +#define AR5K_PHY_IQ 0x9920 /* Register address */ +#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ +#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ +#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 +#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 +#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ + + +/* + * PHY PAPD probe register [5111+ (?)] + * Is this only present in 5212 ? + * Because it's always 0 in 5211 initialization code + */ +#define AR5K_PHY_PAPD_PROBE 0x9930 +#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 +#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 +#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 +#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ +#define AR5K_PHY_PAPD_PROBE_TYPE_S 23 +#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 +#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 +#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 +#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 +#define AR5K_PHY_PAPD_PROBE_GAINF_S 25 +#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ +#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ + + +/* + * PHY TX rate power registers [5112+] + */ +#define AR5K_PHY_TXPOWER_RATE1 0x9934 +#define AR5K_PHY_TXPOWER_RATE2 0x9938 +#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c +#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 +#define AR5K_PHY_TXPOWER_RATE3 0xa234 +#define AR5K_PHY_TXPOWER_RATE4 0xa238 + +/* + * PHY frame control register [5111+] + */ +#define AR5K_PHY_FRAME_CTL_5210 0x9804 +#define AR5K_PHY_FRAME_CTL_5211 0x9944 +#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) +/*---[5111+]---*/ +#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 +#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 +/*---[5110/5111]---*/ +#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 +#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 +#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* illegal rate */ +#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* illegal length */ +#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 +#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* tx underrun */ +#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ + AR5K_PHY_FRAME_CTL_TXURN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ + AR5K_PHY_FRAME_CTL_PARITY_ERR | \ + AR5K_PHY_FRAME_CTL_TIMING_ERR + +/* + * PHY radar detection register [5111+] + */ +#define AR5K_PHY_RADAR 0x9954 + +/* Radar enable ........ ........ ........ .......1 */ +#define AR5K_PHY_RADAR_ENABLE 0x00000001 +#define AR5K_PHY_RADAR_DISABLE 0x00000000 +#define AR5K_PHY_RADAR_ENABLE_S 0 + +/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1... +at power on. */ +#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188 + +/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1 +after DFS is enabled */ +#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d + +/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........ + * power out threshold. + * 7-bits, standard power range {0..127} in 1/2 dBm units. */ +#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000 +#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24 + +/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........ + * 6-bits, dBm range {0..63} in dBm units. */ +#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000 +#define AR5K_PHY_RADAR_RADARRSSITHR_S 18 + +/* Pulse height threshold ........ ......11 1111.... ........ + * 6-bits, dBm range {0..63} in dBm units. */ +#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000 +#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12 + +/* Pulse RSSI/SNR threshold ........ ........ ....1111 11...... + * 6-bits, dBm range {0..63} in dBm units. */ +#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0 +#define AR5K_PHY_RADAR_PULSERSSITHR_S 6 + +/* Inband threshold ........ ........ ........ ..11111. + * 5-bits, units unknown {0..31} (? MHz ?) */ +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e +#define AR5K_PHY_RADAR_INBANDTHR_S 1 + +/* + * PHY antenna switch table registers [5110] + */ +#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 +#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 + +/* + * PHY clock sleep registers [5112+] + */ +#define AR5K_PHY_SCLOCK 0x99f0 +#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c +#define AR5K_PHY_SDELAY 0x99f4 +#define AR5K_PHY_SDELAY_32MHZ 0x000000ff +#define AR5K_PHY_SPENDING 0x99f8 +#define AR5K_PHY_SPENDING_RF5111 0x00000018 +#define AR5K_PHY_SPENDING_RF5112 0x00000014 + +/* + * Misc PHY/radio registers [5110 - 5111] + */ +#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ +#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) + +/* + * PHY timing IQ calibration result register [5111+] + */ +#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ +#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ + +/* + * PHY current RSSI register [5111+] + */ +#define AR5K_PHY_CURRENT_RSSI 0x9c1c + +/* + * PHY PCDAC TX power table + */ +#define AR5K_PHY_PCDAC_TXPOWER_BASE_5211 0xa180 +#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413 0xa280 +#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF5413 ? \ + AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\ + AR5K_PHY_PCDAC_TXPOWER_BASE_5211) +#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) + +/* + * PHY mode register [5111+] + */ +#define AR5K_PHY_MODE 0x0a200 /* Register address */ +#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation mask*/ +#define AR5K_PHY_MODE_MOD_OFDM 0 +#define AR5K_PHY_MODE_MOD_CCK 1 +#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode mask */ +#define AR5K_PHY_MODE_FREQ_5GHZ 0 +#define AR5K_PHY_MODE_FREQ_2GHZ 2 +#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Dynamic OFDM/CCK mode mask [5112+] */ +#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ +#define AR5K_PHY_MODE_RAD_RF5111 0 +#define AR5K_PHY_MODE_RAD_RF5112 8 +#define AR5K_PHY_MODE_XR 0x00000010 /* [5112+] */ + +/* + * PHY CCK transmit control register [5111+ (?)] + */ +#define AR5K_PHY_CCKTXCTL 0xa204 +#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 +#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 + +/* + * PHY 2GHz gain register [5111+] + */ +#define AR5K_PHY_GAIN_2GHZ 0xa20c +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 +#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c diff --git a/drivers/net/wireless/ath5k/regdom.c b/drivers/net/wireless/ath5k/regdom.c new file mode 100644 index 000000000000..e851957dacfd --- /dev/null +++ b/drivers/net/wireless/ath5k/regdom.c @@ -0,0 +1,121 @@ +/* + * Copyright (c) 2004, 2005 Reyk Floeter <reyk@vantronix.net> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * Basic regulation domain extensions for the IEEE 802.11 stack + */ + +#include <linux/kernel.h> +#include <linux/string.h> + +#include "regdom.h" + +static const struct ath5k_regdommap { + enum ath5k_regdom dmn; + enum ath5k_regdom dmn5; + enum ath5k_regdom dmn2; +} r_map[] = { + { DMN_DEFAULT, DMN_DEBUG, DMN_DEBUG }, + { DMN_NULL_WORLD, DMN_NULL, DMN_WORLD }, + { DMN_NULL_ETSIB, DMN_NULL, DMN_ETSIB }, + { DMN_NULL_ETSIC, DMN_NULL, DMN_ETSIC }, + { DMN_FCC1_FCCA, DMN_FCC1, DMN_FCCA }, + { DMN_FCC1_WORLD, DMN_FCC1, DMN_WORLD }, + { DMN_FCC2_FCCA, DMN_FCC2, DMN_FCCA }, + { DMN_FCC2_WORLD, DMN_FCC2, DMN_WORLD }, + { DMN_FCC2_ETSIC, DMN_FCC2, DMN_ETSIC }, + { DMN_FRANCE_NULL, DMN_ETSI3, DMN_ETSI3 }, + { DMN_FCC3_FCCA, DMN_FCC3, DMN_WORLD }, + { DMN_ETSI1_WORLD, DMN_ETSI1, DMN_WORLD }, + { DMN_ETSI3_ETSIA, DMN_ETSI3, DMN_WORLD }, + { DMN_ETSI2_WORLD, DMN_ETSI2, DMN_WORLD }, + { DMN_ETSI3_WORLD, DMN_ETSI3, DMN_WORLD }, + { DMN_ETSI4_WORLD, DMN_ETSI4, DMN_WORLD }, + { DMN_ETSI4_ETSIC, DMN_ETSI4, DMN_ETSIC }, + { DMN_ETSI5_WORLD, DMN_ETSI5, DMN_WORLD }, + { DMN_ETSI6_WORLD, DMN_ETSI6, DMN_WORLD }, + { DMN_ETSI_NULL, DMN_ETSI1, DMN_ETSI1 }, + { DMN_MKK1_MKKA, DMN_MKK1, DMN_MKKA }, + { DMN_MKK1_MKKB, DMN_MKK1, DMN_MKKA }, + { DMN_APL4_WORLD, DMN_APL4, DMN_WORLD }, + { DMN_MKK2_MKKA, DMN_MKK2, DMN_MKKA }, + { DMN_APL_NULL, DMN_APL1, DMN_NULL }, + { DMN_APL2_WORLD, DMN_APL2, DMN_WORLD }, + { DMN_APL2_APLC, DMN_APL2, DMN_WORLD }, + { DMN_APL3_WORLD, DMN_APL3, DMN_WORLD }, + { DMN_MKK1_FCCA, DMN_MKK1, DMN_FCCA }, + { DMN_APL2_APLD, DMN_APL2, DMN_APLD }, + { DMN_MKK1_MKKA1, DMN_MKK1, DMN_MKKA }, + { DMN_MKK1_MKKA2, DMN_MKK1, DMN_MKKA }, + { DMN_APL1_WORLD, DMN_APL1, DMN_WORLD }, + { DMN_APL1_FCCA, DMN_APL1, DMN_FCCA }, + { DMN_APL1_APLA, DMN_APL1, DMN_WORLD }, + { DMN_APL1_ETSIC, DMN_APL1, DMN_ETSIC }, + { DMN_APL2_ETSIC, DMN_APL2, DMN_ETSIC }, + { DMN_APL5_WORLD, DMN_APL5, DMN_WORLD }, + { DMN_WOR0_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR1_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR2_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR3_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR4_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR5_ETSIC, DMN_WORLD, DMN_WORLD }, + { DMN_WOR01_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WOR02_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_EU1_WORLD, DMN_ETSI1, DMN_WORLD }, + { DMN_WOR9_WORLD, DMN_WORLD, DMN_WORLD }, + { DMN_WORA_WORLD, DMN_WORLD, DMN_WORLD }, +}; + +enum ath5k_regdom ath5k_regdom2flag(enum ath5k_regdom dmn, u16 mhz) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(r_map); i++) { + if (r_map[i].dmn == dmn) { + if (mhz >= 2000 && mhz <= 3000) + return r_map[i].dmn2; + if (mhz >= IEEE80211_CHANNELS_5GHZ_MIN && + mhz <= IEEE80211_CHANNELS_5GHZ_MAX) + return r_map[i].dmn5; + } + } + + return DMN_DEBUG; +} + +u16 ath5k_regdom_from_ieee(enum ath5k_regdom ieee) +{ + u32 regdomain = (u32)ieee; + + /* + * Use the default regulation domain if the value is empty + * or not supported by the net80211 regulation code. + */ + if (ath5k_regdom2flag(regdomain, IEEE80211_CHANNELS_5GHZ_MIN) == + DMN_DEBUG) + return (u16)AR5K_TUNE_REGDOMAIN; + + /* It is supported, just return the value */ + return regdomain; +} + +enum ath5k_regdom ath5k_regdom_to_ieee(u16 regdomain) +{ + enum ath5k_regdom ieee = (enum ath5k_regdom)regdomain; + + return ieee; +} + diff --git a/drivers/net/wireless/ath5k/regdom.h b/drivers/net/wireless/ath5k/regdom.h new file mode 100644 index 000000000000..f7d3c66e594e --- /dev/null +++ b/drivers/net/wireless/ath5k/regdom.h @@ -0,0 +1,500 @@ +/* + * Copyright (c) 2004, 2005 Reyk Floeter <reyk@openbsd.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _IEEE80211_REGDOMAIN_H_ +#define _IEEE80211_REGDOMAIN_H_ + +#include <linux/types.h> + +/* Default regulation domain if stored value EEPROM value is invalid */ +#define AR5K_TUNE_REGDOMAIN DMN_FCC2_FCCA /* Canada */ +#define AR5K_TUNE_CTRY CTRY_DEFAULT + + +enum ath5k_regdom { + DMN_DEFAULT = 0x00, + DMN_NULL_WORLD = 0x03, + DMN_NULL_ETSIB = 0x07, + DMN_NULL_ETSIC = 0x08, + DMN_FCC1_FCCA = 0x10, + DMN_FCC1_WORLD = 0x11, + DMN_FCC2_FCCA = 0x20, + DMN_FCC2_WORLD = 0x21, + DMN_FCC2_ETSIC = 0x22, + DMN_FRANCE_NULL = 0x31, + DMN_FCC3_FCCA = 0x3A, + DMN_ETSI1_WORLD = 0x37, + DMN_ETSI3_ETSIA = 0x32, + DMN_ETSI2_WORLD = 0x35, + DMN_ETSI3_WORLD = 0x36, + DMN_ETSI4_WORLD = 0x30, + DMN_ETSI4_ETSIC = 0x38, + DMN_ETSI5_WORLD = 0x39, + DMN_ETSI6_WORLD = 0x34, + DMN_ETSI_NULL = 0x33, + DMN_MKK1_MKKA = 0x40, + DMN_MKK1_MKKB = 0x41, + DMN_APL4_WORLD = 0x42, + DMN_MKK2_MKKA = 0x43, + DMN_APL_NULL = 0x44, + DMN_APL2_WORLD = 0x45, + DMN_APL2_APLC = 0x46, + DMN_APL3_WORLD = 0x47, + DMN_MKK1_FCCA = 0x48, + DMN_APL2_APLD = 0x49, + DMN_MKK1_MKKA1 = 0x4A, + DMN_MKK1_MKKA2 = 0x4B, + DMN_APL1_WORLD = 0x52, + DMN_APL1_FCCA = 0x53, + DMN_APL1_APLA = 0x54, + DMN_APL1_ETSIC = 0x55, + DMN_APL2_ETSIC = 0x56, + DMN_APL5_WORLD = 0x58, + DMN_WOR0_WORLD = 0x60, + DMN_WOR1_WORLD = 0x61, + DMN_WOR2_WORLD = 0x62, + DMN_WOR3_WORLD = 0x63, + DMN_WOR4_WORLD = 0x64, + DMN_WOR5_ETSIC = 0x65, + DMN_WOR01_WORLD = 0x66, + DMN_WOR02_WORLD = 0x67, + DMN_EU1_WORLD = 0x68, + DMN_WOR9_WORLD = 0x69, + DMN_WORA_WORLD = 0x6A, + + DMN_APL1 = 0xf0000001, + DMN_APL2 = 0xf0000002, + DMN_APL3 = 0xf0000004, + DMN_APL4 = 0xf0000008, + DMN_APL5 = 0xf0000010, + DMN_ETSI1 = 0xf0000020, + DMN_ETSI2 = 0xf0000040, + DMN_ETSI3 = 0xf0000080, + DMN_ETSI4 = 0xf0000100, + DMN_ETSI5 = 0xf0000200, + DMN_ETSI6 = 0xf0000400, + DMN_ETSIA = 0xf0000800, + DMN_ETSIB = 0xf0001000, + DMN_ETSIC = 0xf0002000, + DMN_FCC1 = 0xf0004000, + DMN_FCC2 = 0xf0008000, + DMN_FCC3 = 0xf0010000, + DMN_FCCA = 0xf0020000, + DMN_APLD = 0xf0040000, + DMN_MKK1 = 0xf0080000, + DMN_MKK2 = 0xf0100000, + DMN_MKKA = 0xf0200000, + DMN_NULL = 0xf0400000, + DMN_WORLD = 0xf0800000, + DMN_DEBUG = 0xf1000000 /* used for debugging */ +}; + +#define IEEE80211_DMN(_d) ((_d) & ~0xf0000000) + +enum ath5k_countrycode { + CTRY_DEFAULT = 0, /* Default domain (NA) */ + CTRY_ALBANIA = 8, /* Albania */ + CTRY_ALGERIA = 12, /* Algeria */ + CTRY_ARGENTINA = 32, /* Argentina */ + CTRY_ARMENIA = 51, /* Armenia */ + CTRY_AUSTRALIA = 36, /* Australia */ + CTRY_AUSTRIA = 40, /* Austria */ + CTRY_AZERBAIJAN = 31, /* Azerbaijan */ + CTRY_BAHRAIN = 48, /* Bahrain */ + CTRY_BELARUS = 112, /* Belarus */ + CTRY_BELGIUM = 56, /* Belgium */ + CTRY_BELIZE = 84, /* Belize */ + CTRY_BOLIVIA = 68, /* Bolivia */ + CTRY_BRAZIL = 76, /* Brazil */ + CTRY_BRUNEI_DARUSSALAM = 96, /* Brunei Darussalam */ + CTRY_BULGARIA = 100, /* Bulgaria */ + CTRY_CANADA = 124, /* Canada */ + CTRY_CHILE = 152, /* Chile */ + CTRY_CHINA = 156, /* People's Republic of China */ + CTRY_COLOMBIA = 170, /* Colombia */ + CTRY_COSTA_RICA = 188, /* Costa Rica */ + CTRY_CROATIA = 191, /* Croatia */ + CTRY_CYPRUS = 196, /* Cyprus */ + CTRY_CZECH = 203, /* Czech Republic */ + CTRY_DENMARK = 208, /* Denmark */ + CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */ + CTRY_ECUADOR = 218, /* Ecuador */ + CTRY_EGYPT = 818, /* Egypt */ + CTRY_EL_SALVADOR = 222, /* El Salvador */ + CTRY_ESTONIA = 233, /* Estonia */ + CTRY_FAEROE_ISLANDS = 234, /* Faeroe Islands */ + CTRY_FINLAND = 246, /* Finland */ + CTRY_FRANCE = 250, /* France */ + CTRY_FRANCE2 = 255, /* France2 */ + CTRY_GEORGIA = 268, /* Georgia */ + CTRY_GERMANY = 276, /* Germany */ + CTRY_GREECE = 300, /* Greece */ + CTRY_GUATEMALA = 320, /* Guatemala */ + CTRY_HONDURAS = 340, /* Honduras */ + CTRY_HONG_KONG = 344, /* Hong Kong S.A.R., P.R.C. */ + CTRY_HUNGARY = 348, /* Hungary */ + CTRY_ICELAND = 352, /* Iceland */ + CTRY_INDIA = 356, /* India */ + CTRY_INDONESIA = 360, /* Indonesia */ + CTRY_IRAN = 364, /* Iran */ + CTRY_IRAQ = 368, /* Iraq */ + CTRY_IRELAND = 372, /* Ireland */ + CTRY_ISRAEL = 376, /* Israel */ + CTRY_ITALY = 380, /* Italy */ + CTRY_JAMAICA = 388, /* Jamaica */ + CTRY_JAPAN = 392, /* Japan */ + CTRY_JAPAN1 = 393, /* Japan (JP1) */ + CTRY_JAPAN2 = 394, /* Japan (JP0) */ + CTRY_JAPAN3 = 395, /* Japan (JP1-1) */ + CTRY_JAPAN4 = 396, /* Japan (JE1) */ + CTRY_JAPAN5 = 397, /* Japan (JE2) */ + CTRY_JORDAN = 400, /* Jordan */ + CTRY_KAZAKHSTAN = 398, /* Kazakhstan */ + CTRY_KENYA = 404, /* Kenya */ + CTRY_KOREA_NORTH = 408, /* North Korea */ + CTRY_KOREA_ROC = 410, /* South Korea */ + CTRY_KOREA_ROC2 = 411, /* South Korea */ + CTRY_KUWAIT = 414, /* Kuwait */ + CTRY_LATVIA = 428, /* Latvia */ + CTRY_LEBANON = 422, /* Lebanon */ + CTRY_LIBYA = 434, /* Libya */ + CTRY_LIECHTENSTEIN = 438, /* Liechtenstein */ + CTRY_LITHUANIA = 440, /* Lithuania */ + CTRY_LUXEMBOURG = 442, /* Luxembourg */ + CTRY_MACAU = 446, /* Macau */ + CTRY_MACEDONIA = 807, /* Republic of Macedonia */ + CTRY_MALAYSIA = 458, /* Malaysia */ + CTRY_MEXICO = 484, /* Mexico */ + CTRY_MONACO = 492, /* Principality of Monaco */ + CTRY_MOROCCO = 504, /* Morocco */ + CTRY_NETHERLANDS = 528, /* Netherlands */ + CTRY_NEW_ZEALAND = 554, /* New Zealand */ + CTRY_NICARAGUA = 558, /* Nicaragua */ + CTRY_NORWAY = 578, /* Norway */ + CTRY_OMAN = 512, /* Oman */ + CTRY_PAKISTAN = 586, /* Islamic Republic of Pakistan */ + CTRY_PANAMA = 591, /* Panama */ + CTRY_PARAGUAY = 600, /* Paraguay */ + CTRY_PERU = 604, /* Peru */ + CTRY_PHILIPPINES = 608, /* Republic of the Philippines */ + CTRY_POLAND = 616, /* Poland */ + CTRY_PORTUGAL = 620, /* Portugal */ + CTRY_PUERTO_RICO = 630, /* Puerto Rico */ + CTRY_QATAR = 634, /* Qatar */ + CTRY_ROMANIA = 642, /* Romania */ + CTRY_RUSSIA = 643, /* Russia */ + CTRY_SAUDI_ARABIA = 682, /* Saudi Arabia */ + CTRY_SINGAPORE = 702, /* Singapore */ + CTRY_SLOVAKIA = 703, /* Slovak Republic */ + CTRY_SLOVENIA = 705, /* Slovenia */ + CTRY_SOUTH_AFRICA = 710, /* South Africa */ + CTRY_SPAIN = 724, /* Spain */ + CTRY_SRI_LANKA = 728, /* Sri Lanka */ + CTRY_SWEDEN = 752, /* Sweden */ + CTRY_SWITZERLAND = 756, /* Switzerland */ + CTRY_SYRIA = 760, /* Syria */ + CTRY_TAIWAN = 158, /* Taiwan */ + CTRY_THAILAND = 764, /* Thailand */ + CTRY_TRINIDAD_Y_TOBAGO = 780, /* Trinidad y Tobago */ + CTRY_TUNISIA = 788, /* Tunisia */ + CTRY_TURKEY = 792, /* Turkey */ + CTRY_UAE = 784, /* U.A.E. */ + CTRY_UKRAINE = 804, /* Ukraine */ + CTRY_UNITED_KINGDOM = 826, /* United Kingdom */ + CTRY_UNITED_STATES = 840, /* United States */ + CTRY_URUGUAY = 858, /* Uruguay */ + CTRY_UZBEKISTAN = 860, /* Uzbekistan */ + CTRY_VENEZUELA = 862, /* Venezuela */ + CTRY_VIET_NAM = 704, /* Viet Nam */ + CTRY_YEMEN = 887, /* Yemen */ + CTRY_ZIMBABWE = 716, /* Zimbabwe */ +}; + +#define IEEE80211_CHANNELS_2GHZ_MIN 2412 /* 2GHz channel 1 */ +#define IEEE80211_CHANNELS_2GHZ_MAX 2732 /* 2GHz channel 26 */ +#define IEEE80211_CHANNELS_5GHZ_MIN 5005 /* 5GHz channel 1 */ +#define IEEE80211_CHANNELS_5GHZ_MAX 6100 /* 5GHz channel 220 */ + +struct ath5k_regchannel { + u16 chan; + enum ath5k_regdom domain; + u32 mode; +}; + +#define IEEE80211_CHANNELS_2GHZ { \ +/*2412*/ { 1, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2417*/ { 2, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2422*/ { 3, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2427*/ { 4, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2432*/ { 5, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2442*/ { 7, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2447*/ { 8, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2452*/ { 9, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2457*/ { 10, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2462*/ { 11, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2467*/ { 12, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2472*/ { 13, DMN_APLD, CHANNEL_CCK|CHANNEL_OFDM }, \ + \ +/*2432*/ { 5, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*2442*/ { 7, DMN_ETSIB, CHANNEL_CCK|CHANNEL_OFDM }, \ + \ +/*2412*/ { 1, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2417*/ { 2, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2422*/ { 3, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2427*/ { 4, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2432*/ { 5, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*2442*/ { 7, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2447*/ { 8, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2452*/ { 9, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2457*/ { 10, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2462*/ { 11, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2467*/ { 12, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2472*/ { 13, DMN_ETSIC, CHANNEL_CCK|CHANNEL_OFDM }, \ + \ +/*2412*/ { 1, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2417*/ { 2, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2422*/ { 3, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2427*/ { 4, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2432*/ { 5, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*2442*/ { 7, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2447*/ { 8, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2452*/ { 9, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2457*/ { 10, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2462*/ { 11, DMN_FCCA, CHANNEL_CCK|CHANNEL_OFDM }, \ + \ +/*2412*/ { 1, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2417*/ { 2, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2422*/ { 3, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2427*/ { 4, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2432*/ { 5, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2442*/ { 7, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2447*/ { 8, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2452*/ { 9, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2457*/ { 10, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2462*/ { 11, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2467*/ { 12, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2472*/ { 13, DMN_MKKA, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2484*/ { 14, DMN_MKKA, CHANNEL_CCK }, \ + \ +/*2412*/ { 1, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2417*/ { 2, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2422*/ { 3, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2427*/ { 4, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2432*/ { 5, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2437*/ { 6, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*2442*/ { 7, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2447*/ { 8, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2452*/ { 9, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2457*/ { 10, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2462*/ { 11, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2467*/ { 12, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +/*2472*/ { 13, DMN_WORLD, CHANNEL_CCK|CHANNEL_OFDM }, \ +} + +#define IEEE80211_CHANNELS_5GHZ { \ +/*5745*/ { 149, DMN_APL1, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_APL1, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_APL1, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_APL1, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_APL1, CHANNEL_OFDM }, \ + \ +/*5745*/ { 149, DMN_APL2, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_APL2, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_APL2, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_APL2, CHANNEL_OFDM }, \ + \ +/*5280*/ { 56, DMN_APL3, CHANNEL_OFDM }, \ +/*5300*/ { 60, DMN_APL3, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_APL3, CHANNEL_OFDM }, \ +/*5745*/ { 149, DMN_APL3, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_APL3, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_APL3, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_APL3, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_APL4, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_APL4, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_APL4, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_APL4, CHANNEL_OFDM }, \ +/*5745*/ { 149, DMN_APL4, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_APL4, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_APL4, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_APL4, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_APL4, CHANNEL_OFDM }, \ + \ +/*5745*/ { 149, DMN_APL5, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_APL5, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_APL5, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_APL5, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_APL5, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5260*/ { 52, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5300*/ { 60, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5500*/ { 100, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5520*/ { 104, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5540*/ { 108, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5560*/ { 112, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5580*/ { 116, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5600*/ { 120, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5620*/ { 124, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5640*/ { 128, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5660*/ { 132, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5680*/ { 136, DMN_ETSI1, CHANNEL_OFDM }, \ +/*5700*/ { 140, DMN_ETSI1, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI2, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI2, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI2, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI2, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5260*/ { 52, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5300*/ { 60, DMN_ETSI3, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_ETSI3, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5260*/ { 52, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5300*/ { 60, DMN_ETSI4, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_ETSI4, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI5, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI5, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI5, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI5, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5260*/ { 52, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5500*/ { 100, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5520*/ { 104, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5540*/ { 108, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5560*/ { 112, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5580*/ { 116, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5600*/ { 120, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5620*/ { 124, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5640*/ { 128, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5660*/ { 132, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5680*/ { 136, DMN_ETSI6, CHANNEL_OFDM }, \ +/*5700*/ { 140, DMN_ETSI6, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_FCC1, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_FCC1, CHANNEL_OFDM }, \ +/*5210*/ { 42, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5220*/ { 44, DMN_FCC1, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_FCC1, CHANNEL_OFDM }, \ +/*5250*/ { 50, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5260*/ { 52, DMN_FCC1, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_FCC1, CHANNEL_OFDM }, \ +/*5290*/ { 58, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5300*/ { 60, DMN_FCC1, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_FCC1, CHANNEL_OFDM }, \ +/*5745*/ { 149, DMN_FCC1, CHANNEL_OFDM }, \ +/*5760*/ { 152, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5765*/ { 153, DMN_FCC1, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_FCC1, CHANNEL_OFDM }, \ +/*5800*/ { 160, DMN_FCC1, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5805*/ { 161, DMN_FCC1, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_FCC1, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_FCC2, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_FCC2, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_FCC2, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_FCC2, CHANNEL_OFDM }, \ +/*5260*/ { 52, DMN_FCC2, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_FCC2, CHANNEL_OFDM }, \ +/*5300*/ { 60, DMN_FCC2, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_FCC2, CHANNEL_OFDM }, \ +/*5745*/ { 149, DMN_FCC2, CHANNEL_OFDM }, \ +/*5765*/ { 153, DMN_FCC2, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_FCC2, CHANNEL_OFDM }, \ +/*5805*/ { 161, DMN_FCC2, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_FCC2, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_FCC3, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_FCC3, CHANNEL_OFDM }, \ +/*5210*/ { 42, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5220*/ { 44, DMN_FCC3, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_FCC3, CHANNEL_OFDM }, \ +/*5250*/ { 50, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5260*/ { 52, DMN_FCC3, CHANNEL_OFDM }, \ +/*5280*/ { 56, DMN_FCC3, CHANNEL_OFDM }, \ +/*5290*/ { 58, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5300*/ { 60, DMN_FCC3, CHANNEL_OFDM }, \ +/*5320*/ { 64, DMN_FCC3, CHANNEL_OFDM }, \ +/*5500*/ { 100, DMN_FCC3, CHANNEL_OFDM }, \ +/*5520*/ { 104, DMN_FCC3, CHANNEL_OFDM }, \ +/*5540*/ { 108, DMN_FCC3, CHANNEL_OFDM }, \ +/*5560*/ { 112, DMN_FCC3, CHANNEL_OFDM }, \ +/*5580*/ { 116, DMN_FCC3, CHANNEL_OFDM }, \ +/*5600*/ { 120, DMN_FCC3, CHANNEL_OFDM }, \ +/*5620*/ { 124, DMN_FCC3, CHANNEL_OFDM }, \ +/*5640*/ { 128, DMN_FCC3, CHANNEL_OFDM }, \ +/*5660*/ { 132, DMN_FCC3, CHANNEL_OFDM }, \ +/*5680*/ { 136, DMN_FCC3, CHANNEL_OFDM }, \ +/*5700*/ { 140, DMN_FCC3, CHANNEL_OFDM }, \ +/*5745*/ { 149, DMN_FCC3, CHANNEL_OFDM }, \ +/*5760*/ { 152, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5765*/ { 153, DMN_FCC3, CHANNEL_OFDM }, \ +/*5785*/ { 157, DMN_FCC3, CHANNEL_OFDM }, \ +/*5800*/ { 160, DMN_FCC3, CHANNEL_OFDM|CHANNEL_TURBO }, \ +/*5805*/ { 161, DMN_FCC3, CHANNEL_OFDM }, \ +/*5825*/ { 165, DMN_FCC3, CHANNEL_OFDM }, \ + \ +/*5170*/ { 34, DMN_MKK1, CHANNEL_OFDM }, \ +/*5190*/ { 38, DMN_MKK1, CHANNEL_OFDM }, \ +/*5210*/ { 42, DMN_MKK1, CHANNEL_OFDM }, \ +/*5230*/ { 46, DMN_MKK1, CHANNEL_OFDM }, \ + \ +/*5040*/ { 8, DMN_MKK2, CHANNEL_OFDM }, \ +/*5060*/ { 12, DMN_MKK2, CHANNEL_OFDM }, \ +/*5080*/ { 16, DMN_MKK2, CHANNEL_OFDM }, \ +/*5170*/ { 34, DMN_MKK2, CHANNEL_OFDM }, \ +/*5190*/ { 38, DMN_MKK2, CHANNEL_OFDM }, \ +/*5210*/ { 42, DMN_MKK2, CHANNEL_OFDM }, \ +/*5230*/ { 46, DMN_MKK2, CHANNEL_OFDM }, \ + \ +/*5180*/ { 36, DMN_WORLD, CHANNEL_OFDM }, \ +/*5200*/ { 40, DMN_WORLD, CHANNEL_OFDM }, \ +/*5220*/ { 44, DMN_WORLD, CHANNEL_OFDM }, \ +/*5240*/ { 48, DMN_WORLD, CHANNEL_OFDM }, \ +} + +enum ath5k_regdom ath5k_regdom2flag(enum ath5k_regdom, u16); +u16 ath5k_regdom_from_ieee(enum ath5k_regdom ieee); +enum ath5k_regdom ath5k_regdom_to_ieee(u16 regdomain); + +#endif |