diff options
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-u5500.h | 21 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db5500.h | 27 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-db8500.h | 54 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs.h | 46 |
5 files changed, 129 insertions, 24 deletions
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 97ef55f84934..47969909836c 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -50,6 +50,11 @@ #define MOP500_IRQ_END MOP500_NR_IRQS +/* + * We may have several boards, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_BOARD_START remains the same for either board. + */ #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END #define IRQ_BOARD_END MOP500_IRQ_END diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h new file mode 100644 index 000000000000..29d972c7717b --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_U5500_H +#define __MACH_IRQS_BOARD_U5500_H + +#define AB5500_NR_IRQS 5 +#define IRQ_AB5500_BASE IRQ_BOARD_START +#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) + +#define U5500_IRQ_END IRQ_AB5500_END + +#if IRQ_BOARD_END < U5500_IRQ_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END U5500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index bfa123dbec3b..77239776a6f2 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -83,4 +83,31 @@ #define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) #define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) +#ifdef CONFIG_UX500_SOC_DB5500 + +/* + * After the GPIO ones we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_MODEM_EVENTS_END +#endif + +#endif /* CONFIG_UX500_SOC_DB5500 */ + #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h index 8b5d9f0a1633..68bc14974608 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -93,4 +93,58 @@ #define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) #define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) +#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) +#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) +#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) + +#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) +#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) +#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) + +#ifdef CONFIG_UX500_SOC_DB8500 + +/* Virtual interrupts corresponding to the PRCMU wakeups. */ +#define IRQ_PRCMU_BASE IRQ_SOC_START +#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) + +#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) +#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) +#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) +#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) +#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) +#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) +#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) +#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) +#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) +#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) +#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) +#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) +#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) +#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) +#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) +#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) +#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) +#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) +#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) +#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) +#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) +#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) +#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) +#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_PRCMU_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_PRCMU_END +#endif + +#endif /* CONFIG_UX500_SOC_DB8500 */ #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index ba1294c13c4d..9db68d264c5f 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,49 +10,47 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/irqs-db5500.h> -#include <mach/irqs-db8500.h> +#include <mach/hardware.h> -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 /* Shared Peripheral Interrupt (SHPI) */ #define IRQ_SHPI_START 32 -/* Interrupt numbers generic for shared peripheral */ +/* + * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't + * add any other IRQs here, use the irqs-dbx500.h files. + */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -/* There are 128 shared peripheral interrupts assigned to - * INTID[160:32]. The first 32 interrupts are reserved. - */ -#define DBX500_NR_INTERNAL_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 160 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) + +#define IRQ_SOC_START IRQ_GPIO_END +/* This will be overridden by SoC-specific irq headers */ +#define IRQ_SOC_END IRQ_SOC_START +#include <mach/irqs-db5500.h> +#include <mach/irqs-db8500.h> + +#define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START +#define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_U8500 #include <mach/irqs-board-mop500.h> #endif -/* - * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) +#ifdef CONFIG_MACH_U5500 +#include <mach/irqs-board-u5500.h> +#endif -#define NR_IRQS IRQ_MODEM_EVENTS_END +#define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ |