diff options
| -rw-r--r-- | Documentation/w1/w1.generic | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index 4c6509dd4789..e3333eec4320 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -79,10 +79,13 @@ w1 master sysfs interface <xx-xxxxxxxxxxxxx> - a directory for a found device. The format is family-serial bus - (standard) symlink to the w1 bus driver - (standard) symlink to the w1 driver +w1_master_add - Manually register a slave device w1_master_attempts - the number of times a search was attempted w1_master_max_slave_count - the maximum slaves that may be attached to a master w1_master_name - the name of the device (w1_bus_masterX) +w1_master_pullup - 5V strong pullup 0 enabled, 1 disabled +w1_master_remove - Manually remove a slave device w1_master_search - the number of searches left to do, -1=continual (default) w1_master_slave_count - the number of slaves found @@ -90,7 +93,13 @@ w1_master_slaves - the names of the slaves, one per line w1_master_timeout - the delay in seconds between searches If you have a w1 bus that never changes (you don't add or remove devices), -you can set w1_master_search to a positive value to disable searches. +you can set the module parameter search_count to a small positive number +for an initially small number of bus searches. Alternatively it could be +set to zero, then manually add the slave device serial numbers by +w1_master_add device file. The w1_master_add and w1_master_remove files +generally only make sense when searching is disabled, as a search will +redetect manually removed devices that are present and timeout manually +added devices that aren't on the bus. w1 slave sysfs interface |