diff options
-rw-r--r-- | arch/arm/mach-pxa/idp.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-pxa/xcep.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-realview/core.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-sa1100/pleb.c | 2 | ||||
-rw-r--r-- | arch/blackfin/mach-bf561/boards/cm_bf561.c | 3 | ||||
-rw-r--r-- | arch/blackfin/mach-bf561/boards/ezkit.c | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c | 7 | ||||
-rw-r--r-- | drivers/net/ethernet/smsc/smc91x.h | 65 | ||||
-rw-r--r-- | include/linux/smc91x.h | 10 |
9 files changed, 73 insertions, 26 deletions
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f6d02e4cbcda..5c87dff5d46e 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_USE_DMA | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 13b1d4586d7d..9001312710f7 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata xcep_smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT | SMC91X_USE_DMA, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 44575edc44b1..cf0a7c2359f0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -95,7 +95,8 @@ static struct smsc911x_platform_config smsc911x_config = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, }; static struct platform_device realview_eth_device = { diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 1525d7b5f1b7..88149f85bc49 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c6db52ba3a06..10c57771822d 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -146,7 +146,8 @@ static struct platform_device hitachi_fb_device = { #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, .leda = RPC_LED_100_10, .ledb = RPC_LED_TX_RX, }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 2de71e8c104b..93c22468cc14 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -134,7 +134,8 @@ static struct platform_device net2272_bfin_device = { #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, .leda = RPC_LED_100_10, .ledb = RPC_LED_TX_RX, }; diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 0e2fc1a844ab..8c44cf6ff7a2 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2269,6 +2269,13 @@ static int smc_drv_probe(struct platform_device *pdev) if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); + + if (!SMC_8BIT(lp) && !SMC_16BIT(lp)) { + dev_err(&pdev->dev, + "at least one of 8-bit or 16-bit access support is required.\n"); + ret = -ENXIO; + goto out_free_netdev; + } } #if IS_BUILTIN(CONFIG_OF) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index a3c129e1e40a..29df0465daf4 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -37,6 +37,27 @@ #include <linux/smc91x.h> /* + * Any 16-bit access is performed with two 8-bit accesses if the hardware + * can't do it directly. Most registers are 16-bit so those are mandatory. + */ +#define SMC_outw_b(x, a, r) \ + do { \ + unsigned int __val16 = (x); \ + unsigned int __reg = (r); \ + SMC_outb(__val16, a, __reg); \ + SMC_outb(__val16 >> 8, a, __reg + (1 << SMC_IO_SHIFT)); \ + } while (0) + +#define SMC_inw_b(a, r) \ + ({ \ + unsigned int __val16; \ + unsigned int __reg = r; \ + __val16 = SMC_inb(a, __reg); \ + __val16 |= SMC_inb(a, __reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) + +/* * Define your architecture specific bus configuration parameters here. */ @@ -55,10 +76,30 @@ #define SMC_IO_SHIFT (lp->io_shift) #define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inw(a, r) \ + ({ \ + unsigned int __smc_r = r; \ + SMC_16BIT(lp) ? readw((a) + __smc_r) : \ + SMC_8BIT(lp) ? SMC_inw_b(a, __smc_r) : \ + ({ BUG(); 0; }); \ + }) + #define SMC_inl(a, r) readl((a) + (r)) #define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) \ + do { \ + unsigned int __v = v, __smc_r = r; \ + if (SMC_16BIT(lp)) \ + __SMC_outw(__v, a, __smc_r); \ + else if (SMC_8BIT(lp)) \ + SMC_outw_b(__v, a, __smc_r); \ + else \ + BUG(); \ + } while (0) + #define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, l) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, l) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) @@ -66,7 +107,7 @@ #define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ -static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) +static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if ((machine_is_mainstone() || machine_is_stargate2() || machine_is_pxa_idp()) && reg & 2) { @@ -405,24 +446,8 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, #if ! SMC_CAN_USE_16BIT -/* - * Any 16-bit access is performed with two 8-bit accesses if the hardware - * can't do it directly. Most registers are 16-bit so those are mandatory. - */ -#define SMC_outw(x, ioaddr, reg) \ - do { \ - unsigned int __val16 = (x); \ - SMC_outb( __val16, ioaddr, reg ); \ - SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ - } while (0) -#define SMC_inw(ioaddr, reg) \ - ({ \ - unsigned int __val16; \ - __val16 = SMC_inb( ioaddr, reg ); \ - __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ - __val16; \ - }) - +#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg) +#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg) #define SMC_insw(a, r, p, l) BUG() #define SMC_outsw(a, r, p, l) BUG() diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 76199b75d584..e302c447e057 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -1,6 +1,16 @@ #ifndef __SMC91X_H__ #define __SMC91X_H__ +/* + * These bits define which access sizes a platform can support, rather + * than the maximal access size. So, if your platform can do 16-bit + * and 32-bit accesses to the SMC91x device, but not 8-bit, set both + * SMC91X_USE_16BIT and SMC91X_USE_32BIT. + * + * The SMC91x driver requires at least one of SMC91X_USE_8BIT or + * SMC91X_USE_16BIT to be supported - just setting SMC91X_USE_32BIT is + * an invalid configuration. + */ #define SMC91X_USE_8BIT (1 << 0) #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) |