summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/via-velocity.c178
-rw-r--r--drivers/net/via-velocity.h204
2 files changed, 176 insertions, 206 deletions
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index fd1ff123efa0..4ae05799ac44 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -85,6 +85,163 @@
static int velocity_nics = 0;
static int msglevel = MSG_LEVEL_INFO;
+/**
+ * mac_get_cam_mask - Read a CAM mask
+ * @regs: register block for this velocity
+ * @mask: buffer to store mask
+ *
+ * Fetch the mask bits of the selected CAM and store them into the
+ * provided mask buffer.
+ */
+
+static void mac_get_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* read mask */
+ for (i = 0; i < 8; i++)
+ *mask++ = readb(&(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+}
+
+
+/**
+ * mac_set_cam_mask - Set a CAM mask
+ * @regs: register block for this velocity
+ * @mask: CAM mask to load
+ *
+ * Store a new mask into a CAM
+ */
+
+static void mac_set_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(CAMADDR_CAMEN, &regs->CAMADDR);
+
+ for (i = 0; i < 8; i++) {
+ writeb(*mask++, &(regs->MARCAM[i]));
+ }
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam_mask(struct mac_regs __iomem * regs, u8 * mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, &regs->CAMADDR);
+
+ for (i = 0; i < 8; i++) {
+ writeb(*mask++, &(regs->MARCAM[i]));
+ }
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+/**
+ * mac_set_cam - set CAM data
+ * @regs: register block of this velocity
+ * @idx: Cam index
+ * @addr: 2 or 6 bytes of CAM data
+ *
+ * Load an address or vlan tag into a CAM
+ */
+
+static void mac_set_cam(struct mac_regs __iomem * regs, int idx, const u8 *addr)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
+
+ for (i = 0; i < 6; i++) {
+ writeb(*addr++, &(regs->MARCAM[i]));
+ }
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+ udelay(10);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam(struct mac_regs __iomem * regs, int idx,
+ const u8 *addr)
+{
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
+ writew(*((u16 *) addr), &regs->MARCAM[0]);
+
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+ udelay(10);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+
+/**
+ * mac_wol_reset - reset WOL after exiting low power
+ * @regs: register block of this velocity
+ *
+ * Called after we drop out of wake on lan mode in order to
+ * reset the Wake on lan features. This function doesn't restore
+ * the rest of the logic from the result of sleep/wakeup
+ */
+
+static void mac_wol_reset(struct mac_regs __iomem * regs)
+{
+
+ /* Turn off SWPTAG right after leaving power mode */
+ BYTE_REG_BITS_OFF(STICKHW_SWPTAG, &regs->STICKHW);
+ /* clear sticky bits */
+ BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+ BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, &regs->CHIPGCR);
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+ /* disable force PME-enable */
+ writeb(WOLCFG_PMEOVR, &regs->WOLCFGClr);
+ /* disable power-event config bit */
+ writew(0xFFFF, &regs->WOLCRClr);
+ /* clear power status */
+ writew(0xFFFF, &regs->WOLSRClr);
+}
static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static const struct ethtool_ops velocity_ethtool_ops;
@@ -309,7 +466,7 @@ MODULE_DEVICE_TABLE(pci, velocity_id_table);
* a pointer a static string valid while the driver is loaded.
*/
-static char __devinit *get_chip_name(enum chip_type chip_id)
+static const char __devinit *get_chip_name(enum chip_type chip_id)
{
int i;
for (i = 0; chip_info_table[i].name != NULL; i++)
@@ -458,8 +615,8 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
/* Disable all CAMs */
memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+ mac_set_cam_mask(regs, vptr->mCAMmask);
/* Enable first VCAM */
if (vptr->vlgrp) {
@@ -471,17 +628,16 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
if (vid != 0)
WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
- mac_set_cam(regs, 0, (u8 *) &vid,
- VELOCITY_VLAN_ID_CAM);
+ mac_set_vlan_cam(regs, 0, (u8 *) &vid);
}
}
vptr->vCAMmask[0] |= 1;
- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
} else {
u16 temp = 0;
- mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+ mac_set_vlan_cam(regs, 0, (u8 *) &temp);
temp = 1;
- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
+ mac_set_vlan_cam_mask(regs, (u8 *) &temp);
}
}
@@ -2131,14 +2287,14 @@ static void velocity_set_multi(struct net_device *dev)
rx_mode = (RCR_AM | RCR_AB);
} else {
int offset = MCAM_SIZE - vptr->multicast_limit;
- mac_get_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
+ mac_get_cam_mask(regs, vptr->mCAMmask);
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
- mac_set_cam(regs, i + offset, mclist->dmi_addr, VELOCITY_MULTICAST_CAM);
+ mac_set_cam(regs, i + offset, mclist->dmi_addr);
vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
}
- mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
+ mac_set_cam_mask(regs, vptr->mCAMmask);
rx_mode = (RCR_AM | RCR_AB);
}
if (dev->mtu > 1500)
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index af17161286ae..aa9179623d90 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1173,7 +1173,7 @@ enum chip_type {
struct velocity_info_tbl {
enum chip_type chip_id;
- char *name;
+ const char *name;
int txqueue;
u32 flags;
};
@@ -1194,14 +1194,6 @@ struct velocity_info_tbl {
#define mac_disable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Clr))
#define mac_enable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Set))
-#define mac_hw_mibs_read(regs, MIBs) {\
- int i;\
- BYTE_REG_BITS_ON(MIBCR_MPTRINI,&((regs)->MIBCR));\
- for (i=0;i<HW_MIB_SIZE;i++) {\
- (MIBs)[i]=readl(&((regs)->MIBData));\
- }\
-}
-
#define mac_set_dma_length(regs, n) {\
BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\
}
@@ -1226,195 +1218,17 @@ struct velocity_info_tbl {
writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\
}
-#define mac_eeprom_reload(regs) {\
- int i=0;\
- BYTE_REG_BITS_ON(EECSR_RELOAD,&((regs)->EECSR));\
- do {\
- udelay(10);\
- if (i++>0x1000) {\
- break;\
- }\
- }while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&((regs)->EECSR)));\
-}
-
-enum velocity_cam_type {
- VELOCITY_VLAN_ID_CAM = 0,
- VELOCITY_MULTICAST_CAM
-};
-
-/**
- * mac_get_cam_mask - Read a CAM mask
- * @regs: register block for this velocity
- * @mask: buffer to store mask
- * @cam_type: CAM to fetch
- *
- * Fetch the mask bits of the selected CAM and store them into the
- * provided mask buffer.
- */
-
-static inline void mac_get_cam_mask(struct mac_regs __iomem * regs, u8 * mask, enum velocity_cam_type cam_type)
-{
- int i;
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_VCAMSL, &regs->CAMADDR);
- else
- writeb(0, &regs->CAMADDR);
-
- /* read mask */
- for (i = 0; i < 8; i++)
- *mask++ = readb(&(regs->MARCAM[i]));
-
- /* disable CAMEN */
- writeb(0, &regs->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-}
-
-/**
- * mac_set_cam_mask - Set a CAM mask
- * @regs: register block for this velocity
- * @mask: CAM mask to load
- * @cam_type: CAM to store
- *
- * Store a new mask into a CAM
- */
-
-static inline void mac_set_cam_mask(struct mac_regs __iomem * regs, u8 * mask, enum velocity_cam_type cam_type)
-{
- int i;
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, &regs->CAMADDR);
- else
- writeb(CAMADDR_CAMEN, &regs->CAMADDR);
-
- for (i = 0; i < 8; i++) {
- writeb(*mask++, &(regs->MARCAM[i]));
- }
- /* disable CAMEN */
- writeb(0, &regs->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- * mac_set_cam - set CAM data
- * @regs: register block of this velocity
- * @idx: Cam index
- * @addr: 2 or 6 bytes of CAM data
- * @cam_type: CAM to load
- *
- * Load an address or vlan tag into a CAM
- */
-
-static inline void mac_set_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
- idx &= (64 - 1);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
- else
- writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writew(*((u16 *) addr), &regs->MARCAM[0]);
- else {
- for (i = 0; i < 6; i++) {
- writeb(*addr++, &(regs->MARCAM[i]));
- }
- }
- BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
-
- udelay(10);
-
- writeb(0, &regs->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- * mac_get_cam - fetch CAM data
- * @regs: register block of this velocity
- * @idx: Cam index
- * @addr: buffer to hold up to 6 bytes of CAM data
- * @cam_type: CAM to load
- *
- * Load an address or vlan tag from a CAM into the buffer provided by
- * the caller. VLAN tags are 2 bytes the address cam entries are 6.
- */
-
-static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
- idx &= (64 - 1);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
- else
- writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
-
- BYTE_REG_BITS_ON(CAMCR_CAMRD, &regs->CAMCR);
-
- udelay(10);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- *((u16 *) addr) = readw(&(regs->MARCAM[0]));
- else
- for (i = 0; i < 6; i++, addr++)
- *((u8 *) addr) = readb(&(regs->MARCAM[i]));
-
- writeb(0, &regs->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- * mac_wol_reset - reset WOL after exiting low power
- * @regs: register block of this velocity
- *
- * Called after we drop out of wake on lan mode in order to
- * reset the Wake on lan features. This function doesn't restore
- * the rest of the logic from the result of sleep/wakeup
- */
-
-static inline void mac_wol_reset(struct mac_regs __iomem * regs)
-{
+static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) {
+ int i=0;
- /* Turn off SWPTAG right after leaving power mode */
- BYTE_REG_BITS_OFF(STICKHW_SWPTAG, &regs->STICKHW);
- /* clear sticky bits */
- BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
-
- BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, &regs->CHIPGCR);
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
- /* disable force PME-enable */
- writeb(WOLCFG_PMEOVR, &regs->WOLCFGClr);
- /* disable power-event config bit */
- writew(0xFFFF, &regs->WOLCRClr);
- /* clear power status */
- writew(0xFFFF, &regs->WOLSRClr);
+ BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR));
+ do {
+ udelay(10);
+ if (i++>0x1000)
+ break;
+ } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR)));
}
-
/*
* Header for WOL definitions. Used to compute hashes
*/