diff options
| -rw-r--r-- | include/linux/nl80211.h | 7 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 20 | ||||
| -rw-r--r-- | net/wireless/core.h | 2 | ||||
| -rw-r--r-- | net/wireless/nl80211.c | 70 |
4 files changed, 98 insertions, 1 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 901a70d327d1..c29a284c27e6 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -527,6 +527,11 @@ * up the event with the request. The event includes the same data and * has %NL80211_ATTR_ACK set if the frame was ACKed. * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -660,6 +665,8 @@ enum nl80211_commands { NL80211_CMD_PROBE_CLIENT, + NL80211_CMD_REGISTER_BEACONS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 389e85e8c03d..d01307f54faa 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1686,6 +1686,9 @@ struct cfg80211_ops { * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be * used for asking the driver/firmware to perform a TDLS operation. * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME + * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes + * when there are virtual interfaces in AP mode by calling + * cfg80211_report_obss_beacon(). */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1705,6 +1708,7 @@ enum wiphy_flags { WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), WIPHY_FLAG_HAVE_AP_SME = BIT(17), + WIPHY_FLAG_REPORTS_OBSS = BIT(18), }; /** @@ -3233,6 +3237,22 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev, void cfg80211_probe_status(struct net_device *dev, const u8 *addr, u64 cookie, bool acked, gfp_t gfp); +/** + * cfg80211_report_obss_beacon - report beacon from other APs + * @wiphy: The wiphy that received the beacon + * @frame: the frame + * @len: length of the frame + * @freq: frequency the frame was received on + * @gfp: allocation flags + * + * Use this function to report to userspace when a beacon was + * received. It is not useful to call this when there is no + * netdev that is in AP/GO mode. + */ +void cfg80211_report_obss_beacon(struct wiphy *wiphy, + const u8 *frame, size_t len, + int freq, gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/net/wireless/core.h b/net/wireless/core.h index b9ec3061ed72..4c6ff4024356 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -54,6 +54,8 @@ struct cfg80211_registered_device { int opencount; /* also protected by devlist_mtx */ wait_queue_head_t dev_wait; + u32 ap_beacons_nlpid; + /* BSSes/scanning */ spinlock_t bss_lock; struct list_head bss_list; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index a8eda12b46a8..68b6708b996f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -891,6 +891,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) CMD(sched_scan_start, START_SCHED_SCAN); CMD(probe_client, PROBE_CLIENT); + if (dev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS) { + i++; + NLA_PUT_U32(msg, i, NL80211_CMD_REGISTER_BEACONS); + } #undef CMD @@ -5907,6 +5911,21 @@ static int nl80211_probe_client(struct sk_buff *skb, return err; } +static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + + if (!(rdev->wiphy.flags & WIPHY_FLAG_REPORTS_OBSS)) + return -EOPNOTSUPP; + + if (rdev->ap_beacons_nlpid) + return -EBUSY; + + rdev->ap_beacons_nlpid = info->snd_pid; + + return 0; +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -6478,6 +6497,14 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_REGISTER_BEACONS, + .doit = nl80211_register_beacons, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_WIPHY | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { @@ -7582,6 +7609,44 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, } EXPORT_SYMBOL(cfg80211_probe_status); +void cfg80211_report_obss_beacon(struct wiphy *wiphy, + const u8 *frame, size_t len, + int freq, gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + struct sk_buff *msg; + void *hdr; + u32 nlpid = ACCESS_ONCE(rdev->ap_beacons_nlpid); + + if (!nlpid) + return; + + msg = nlmsg_new(len + 100, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME); + if (!hdr) { + nlmsg_free(msg); + return; + } + + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx); + if (freq) + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq); + NLA_PUT(msg, NL80211_ATTR_FRAME, len, frame); + + genlmsg_end(msg, hdr); + + genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlpid); + return; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} +EXPORT_SYMBOL(cfg80211_report_obss_beacon); + static int nl80211_netlink_notify(struct notifier_block * nb, unsigned long state, void *_notify) @@ -7595,9 +7660,12 @@ static int nl80211_netlink_notify(struct notifier_block * nb, rcu_read_lock(); - list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list) + list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list) { list_for_each_entry_rcu(wdev, &rdev->netdev_list, list) cfg80211_mlme_unregister_socket(wdev, notify->pid); + if (rdev->ap_beacons_nlpid == notify->pid) + rdev->ap_beacons_nlpid = 0; + } rcu_read_unlock(); |