summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/Space.c16
-rw-r--r--drivers/net/ethernet/8390/3c503.c778
-rw-r--r--drivers/net/ethernet/8390/3c503.h91
-rw-r--r--drivers/net/ethernet/8390/Kconfig48
-rw-r--r--drivers/net/ethernet/8390/Makefile4
-rw-r--r--drivers/net/ethernet/8390/e2100.c489
-rw-r--r--drivers/net/ethernet/8390/hp-plus.c505
-rw-r--r--drivers/net/ethernet/8390/hp.c438
8 files changed, 0 insertions, 2369 deletions
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 15de20bed4fc..393b0176c131 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -40,14 +40,10 @@
extern struct net_device *hp100_probe(int unit);
extern struct net_device *ultra_probe(int unit);
extern struct net_device *wd_probe(int unit);
-extern struct net_device *el2_probe(int unit);
extern struct net_device *ne_probe(int unit);
-extern struct net_device *hp_probe(int unit);
-extern struct net_device *hp_plus_probe(int unit);
extern struct net_device *fmv18x_probe(int unit);
extern struct net_device *i82596_probe(int unit);
extern struct net_device *ewrk3_probe(int unit);
-extern struct net_device *e2100_probe(int unit);
extern struct net_device *ni65_probe(int unit);
extern struct net_device *sonic_probe(int unit);
extern struct net_device *seeq8005_probe(int unit);
@@ -108,18 +104,6 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
-#ifdef CONFIG_EL2 /* 3c503 */
- {el2_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN
- {hp_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN_PLUS
- {hp_plus_probe, 0},
-#endif
-#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
- {e2100_probe, 0},
-#endif
#if defined(CONFIG_NE2000) || \
defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c
deleted file mode 100644
index 0e9afe7b61a4..000000000000
--- a/drivers/net/ethernet/8390/3c503.c
+++ /dev/null
@@ -1,778 +0,0 @@
-/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */
-/*
- Written 1992-94 by Donald Becker.
-
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency. This software may be used and
- distributed according to the terms of the GNU General Public License,
- incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
-
- This driver should work with the 3c503 and 3c503/16. It should be used
- in shared memory mode for best performance, although it may also work
- in programmed-I/O mode.
-
- Sources:
- EtherLink II Technical Reference Manual,
- EtherLink II/16 Technical Reference Manual Supplement,
- 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145
-
- The Crynwr 3c503 packet driver.
-
- Changelog:
-
- Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards.
- Paul Gortmaker : multiple card support for module users.
- rjohnson@analogic.com : Fix up PIO interface for efficient operation.
- Jeff Garzik : ethtool support
-
-*/
-
-#define DRV_NAME "3c503"
-#define DRV_VERSION "1.10a"
-#define DRV_RELDATE "11/17/2001"
-
-
-static const char version[] =
- DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ethtool.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-#include "8390.h"
-#include "3c503.h"
-#define WRD_COUNT 4
-
-static int el2_pio_probe(struct net_device *dev);
-static int el2_probe1(struct net_device *dev, int ioaddr);
-
-/* A zero-terminated list of I/O addresses to be probed in PIO mode. */
-static unsigned int netcard_portlist[] __initdata =
- { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0};
-
-#define EL2_IO_EXTENT 16
-
-static int el2_open(struct net_device *dev);
-static int el2_close(struct net_device *dev);
-static void el2_reset_8390(struct net_device *dev);
-static void el2_init_card(struct net_device *dev);
-static void el2_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb,
- int ring_offset);
-static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static const struct ethtool_ops netdev_ethtool_ops;
-
-
-/* This routine probes for a memory-mapped 3c503 board by looking for
- the "location register" at the end of the jumpered boot PROM space.
- This works even if a PROM isn't there.
-
- If the ethercard isn't found there is an optional probe for
- ethercard jumpered to programmed-I/O mode.
- */
-static int __init do_el2_probe(struct net_device *dev)
-{
- int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0};
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return el2_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (addr = addrs; *addr; addr++) {
- void __iomem *p = ioremap(*addr, 1);
- unsigned base_bits;
- int i;
-
- if (!p)
- continue;
- base_bits = readb(p);
- iounmap(p);
- i = ffs(base_bits) - 1;
- if (i == -1 || base_bits != (1 << i))
- continue;
- if (el2_probe1(dev, netcard_portlist[i]) == 0)
- return 0;
- dev->irq = irq;
- }
-#if ! defined(no_probe_nonshared_memory)
- return el2_pio_probe(dev);
-#else
- return -ENODEV;
-#endif
-}
-
-/* Try all of the locations that aren't obviously empty. This touches
- a lot of locations, and is much riskier than the code above. */
-static int __init
-el2_pio_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return el2_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; netcard_portlist[i]; i++) {
- if (el2_probe1(dev, netcard_portlist[i]) == 0)
- return 0;
- dev->irq = irq;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init el2_probe(int unit)
-{
- struct net_device *dev = alloc_eip_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_el2_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops el2_netdev_ops = {
- .ndo_open = el2_open,
- .ndo_stop = el2_close,
-
- .ndo_start_xmit = eip_start_xmit,
- .ndo_tx_timeout = eip_tx_timeout,
- .ndo_get_stats = eip_get_stats,
- .ndo_set_rx_mode = eip_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = eip_poll,
-#endif
-};
-
-/* Probe for the Etherlink II card at I/O port base IOADDR,
- returning non-zero on success. If found, set the station
- address and memory parameters in DEVICE. */
-static int __init
-el2_probe1(struct net_device *dev, int ioaddr)
-{
- int i, iobase_reg, membase_reg, saved_406, wordlength, retval;
- static unsigned version_printed;
- unsigned long vendor_id;
-
- if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) {
- retval = -EBUSY;
- goto out;
- }
-
- /* Reset and/or avoid any lurking NE2000 */
- if (inb(ioaddr + 0x408) == 0xff) {
- mdelay(1);
- retval = -ENODEV;
- goto out1;
- }
-
- /* We verify that it's a 3C503 board by checking the first three octets
- of its ethernet address. */
- iobase_reg = inb(ioaddr+0x403);
- membase_reg = inb(ioaddr+0x404);
- /* ASIC location registers should be 0 or have only a single bit set. */
- if ((iobase_reg & (iobase_reg - 1)) ||
- (membase_reg & (membase_reg - 1))) {
- retval = -ENODEV;
- goto out1;
- }
- saved_406 = inb_p(ioaddr + 0x406);
- outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */
- outb_p(ECNTRL_THIN, ioaddr + 0x406);
- /* Map the station addr PROM into the lower I/O ports. We now check
- for both the old and new 3Com prefix */
- outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406);
- vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2);
- if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) {
- /* Restore the register we frobbed. */
- outb(saved_406, ioaddr + 0x406);
- retval = -ENODEV;
- goto out1;
- }
-
- if (ei_debug && version_printed++ == 0)
- pr_debug("%s", version);
-
- dev->base_addr = ioaddr;
-
- pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);
-
- /* Retrieve and print the ethernet address. */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(ioaddr + i);
- pr_cont("%pM", dev->dev_addr);
-
- /* Map the 8390 back into the window. */
- outb(ECNTRL_THIN, ioaddr + 0x406);
-
- /* Check for EL2/16 as described in tech. man. */
- outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
- outb_p(0, ioaddr + EN0_DCFG);
- outb_p(E8390_PAGE2, ioaddr + E8390_CMD);
- wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS;
- outb_p(E8390_PAGE0, ioaddr + E8390_CMD);
-
- /* Probe for, turn on and clear the board's shared memory. */
- if (ei_debug > 2)
- pr_cont(" memory jumpers %2.2x ", membase_reg);
- outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */
-
- /* This should be probed for (or set via an ioctl()) at run-time.
- Right now we use a sleazy hack to pass in the interface number
- at boot-time via the low bits of the mem_end field. That value is
- unused, and the low bits would be discarded even if it was used. */
-#if defined(EI8390_THICK) || defined(EL2_AUI)
- ei_status.interface_num = 1;
-#else
- ei_status.interface_num = dev->mem_end & 0xf;
-#endif
- pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");
-
- if ((membase_reg & 0xf0) == 0) {
- dev->mem_start = 0;
- ei_status.name = "3c503-PIO";
- ei_status.mem = NULL;
- } else {
- dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) +
- ((membase_reg & 0xA0) ? 0x4000 : 0);
-#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256
- ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE);
-
-#ifdef EL2MEMTEST
- /* This has never found an error, but someone might care.
- Note that it only tests the 2nd 8kB on 16kB 3c503/16
- cards between card addr. 0x2000 and 0x3fff. */
- { /* Check the card's memory. */
- void __iomem *mem_base = ei_status.mem;
- unsigned int test_val = 0xbbadf00d;
- writel(0xba5eba5e, mem_base);
- for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
- writel(test_val, mem_base + i);
- if (readl(mem_base) != 0xba5eba5e ||
- readl(mem_base + i) != test_val) {
- pr_warning("3c503: memory failure or memory address conflict.\n");
- dev->mem_start = 0;
- ei_status.name = "3c503-PIO";
- iounmap(mem_base);
- ei_status.mem = NULL;
- break;
- }
- test_val += 0x55555555;
- writel(0, mem_base + i);
- }
- }
-#endif /* EL2MEMTEST */
-
- if (dev->mem_start)
- dev->mem_end = dev->mem_start + EL2_MEMSIZE;
-
- if (wordlength) { /* No Tx pages to skip over to get to Rx */
- ei_status.priv = 0;
- ei_status.name = "3c503/16";
- } else {
- ei_status.priv = TX_PAGES * 256;
- ei_status.name = "3c503";
- }
- }
-
- /*
- Divide up the memory on the card. This is the same regardless of
- whether shared-mem or PIO is used. For 16 bit cards (16kB RAM),
- we use the entire 8k of bank1 for an Rx ring. We only use 3k
- of the bank0 for 2 full size Tx packet slots. For 8 bit cards,
- (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining
- 5kB for an Rx ring. */
-
- if (wordlength) {
- ei_status.tx_start_page = EL2_MB0_START_PG;
- ei_status.rx_start_page = EL2_MB1_START_PG;
- } else {
- ei_status.tx_start_page = EL2_MB1_START_PG;
- ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
- }
-
- /* Finish setting the board's parameters. */
- ei_status.stop_page = EL2_MB1_STOP_PG;
- ei_status.word16 = wordlength;
- ei_status.reset_8390 = el2_reset_8390;
- ei_status.get_8390_hdr = el2_get_8390_hdr;
- ei_status.block_input = el2_block_input;
- ei_status.block_output = el2_block_output;
-
- if (dev->irq == 2)
- dev->irq = 9;
- else if (dev->irq > 5 && dev->irq != 9) {
- pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",
- dev->irq);
- dev->irq = 0;
- }
-
- ei_status.saved_irq = dev->irq;
-
- dev->netdev_ops = &el2_netdev_ops;
- dev->ethtool_ops = &netdev_ethtool_ops;
-
- retval = register_netdev(dev);
- if (retval)
- goto out1;
-
- if (dev->mem_start)
- pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",
- dev->name, ei_status.name, (wordlength+1)<<3,
- dev->mem_start, dev->mem_end-1);
-
- else
- {
- ei_status.tx_start_page = EL2_MB1_START_PG;
- ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;
- pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",
- dev->name, ei_status.name, (wordlength+1)<<3);
- }
- release_region(ioaddr + 0x400, 8);
- return 0;
-out1:
- release_region(ioaddr + 0x400, 8);
-out:
- release_region(ioaddr, EL2_IO_EXTENT);
- return retval;
-}
-
-static irqreturn_t el2_probe_interrupt(int irq, void *seen)
-{
- *(bool *)seen = true;
- return IRQ_HANDLED;
-}
-
-static int
-el2_open(struct net_device *dev)
-{
- int retval;
-
- if (dev->irq < 2) {
- static const int irqlist[] = {5, 9, 3, 4, 0};
- const int *irqp = irqlist;
-
- outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */
- do {
- bool seen;
-
- retval = request_irq(*irqp, el2_probe_interrupt, 0,
- dev->name, &seen);
- if (retval == -EBUSY)
- continue;
- if (retval < 0)
- goto err_disable;
-
- /* Twinkle the interrupt, and check if it's seen. */
- seen = false;
- smp_wmb();
- outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
- outb_p(0x00, E33G_IDCFR);
- msleep(1);
- free_irq(*irqp, &seen);
- if (!seen)
- continue;
-
- retval = request_irq(dev->irq = *irqp, eip_interrupt, 0,
- dev->name, dev);
- if (retval == -EBUSY)
- continue;
- if (retval < 0)
- goto err_disable;
- break;
- } while (*++irqp);
-
- if (*irqp == 0) {
- err_disable:
- outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
- return -EAGAIN;
- }
- } else {
- if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
- return retval;
- }
- }
-
- el2_init_card(dev);
- eip_open(dev);
- return 0;
-}
-
-static int
-el2_close(struct net_device *dev)
-{
- free_irq(dev->irq, dev);
- dev->irq = ei_status.saved_irq;
- outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */
-
- eip_close(dev);
- return 0;
-}
-
-/* This is called whenever we have a unrecoverable failure:
- transmit timeout
- Bad ring buffer packet header
- */
-static void
-el2_reset_8390(struct net_device *dev)
-{
- if (ei_debug > 1) {
- pr_debug("%s: Resetting the 3c503 board...", dev->name);
- pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),
- E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));
- }
- outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);
- ei_status.txing = 0;
- outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
- el2_init_card(dev);
- if (ei_debug > 1)
- pr_cont("done\n");
-}
-
-/* Initialize the 3c503 GA registers after a reset. */
-static void
-el2_init_card(struct net_device *dev)
-{
- /* Unmap the station PROM and select the DIX or BNC connector. */
- outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
-
- /* Set ASIC copy of rx's first and last+1 buffer pages */
- /* These must be the same as in the 8390. */
- outb(ei_status.rx_start_page, E33G_STARTPG);
- outb(ei_status.stop_page, E33G_STOPPG);
-
- /* Point the vector pointer registers somewhere ?harmless?. */
- outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */
- outb(0xff, E33G_VP1);
- outb(0x00, E33G_VP0);
- /* Turn off all interrupts until we're opened. */
- outb_p(0x00, dev->base_addr + EN0_IMR);
- /* Enable IRQs iff started. */
- outb(EGACFR_NORM, E33G_GACFR);
-
- /* Set the interrupt line. */
- outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR);
- outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */
- outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */
- outb_p(0x00, E33G_DMAAL);
- return; /* We always succeed */
-}
-
-/*
- * Either use the shared memory (if enabled on the board) or put the packet
- * out through the ASIC FIFO.
- */
-static void
-el2_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- unsigned short int *wrd;
- int boguscount; /* timeout counter */
- unsigned short word; /* temporary for better machine code */
- void __iomem *base = ei_status.mem;
-
- if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */
- outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR);
- else
- outb(EGACFR_NORM, E33G_GACFR);
-
- if (base) { /* Shared memory transfer */
- memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8),
- buf, count);
- outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */
- return;
- }
-
-/*
- * No shared memory, put the packet out the other way.
- * Set up then start the internal memory transfer to Tx Start Page
- */
-
- word = (unsigned short)start_page;
- outb(word&0xFF, E33G_DMAAH);
- outb(word>>8, E33G_DMAAL);
-
- outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT
- | ECNTRL_START, E33G_CNTRL);
-
-/*
- * Here I am going to write data to the FIFO as quickly as possible.
- * Note that E33G_FIFOH is defined incorrectly. It is really
- * E33G_FIFOL, the lowest port address for both the byte and
- * word write. Variable 'count' is NOT checked. Caller must supply a
- * valid count. Note that I may write a harmless extra byte to the
- * 8390 if the byte-count was not even.
- */
- wrd = (unsigned short int *) buf;
- count = (count + 1) >> 1;
- for(;;)
- {
- boguscount = 0x1000;
- while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
- {
- if(!boguscount--)
- {
- pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);
- el2_reset_8390(dev);
- goto blocked;
- }
- }
- if(count > WRD_COUNT)
- {
- outsw(E33G_FIFOH, wrd, WRD_COUNT);
- wrd += WRD_COUNT;
- count -= WRD_COUNT;
- }
- else
- {
- outsw(E33G_FIFOH, wrd, count);
- break;
- }
- }
- blocked:;
- outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
-}
-
-/* Read the 4 byte, page aligned 8390 specific header. */
-static void
-el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int boguscount;
- void __iomem *base = ei_status.mem;
- unsigned short word;
-
- if (base) { /* Use the shared memory. */
- void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8);
- memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
- hdr->count = le16_to_cpu(hdr->count);
- return;
- }
-
-/*
- * No shared memory, use programmed I/O.
- */
-
- word = (unsigned short)ring_page;
- outb(word&0xFF, E33G_DMAAH);
- outb(word>>8, E33G_DMAAL);
-
- outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
- | ECNTRL_START, E33G_CNTRL);
- boguscount = 0x1000;
- while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
- {
- if(!boguscount--)
- {
- pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);
- memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));
- el2_reset_8390(dev);
- goto blocked;
- }
- }
- insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1);
- blocked:;
- outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
-}
-
-
-static void
-el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int boguscount = 0;
- void __iomem *base = ei_status.mem;
- unsigned short int *buf;
- unsigned short word;
-
- /* Maybe enable shared memory just be to be safe... nahh.*/
- if (base) { /* Use the shared memory. */
- ring_offset -= (EL2_MB1_START_PG<<8);
- if (ring_offset + count > EL2_MEMSIZE) {
- /* We must wrap the input move. */
- int semi_count = EL2_MEMSIZE - ring_offset;
- memcpy_fromio(skb->data, base + ring_offset, semi_count);
- count -= semi_count;
- memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count);
- } else {
- memcpy_fromio(skb->data, base + ring_offset, count);
- }
- return;
- }
-
-/*
- * No shared memory, use programmed I/O.
- */
- word = (unsigned short) ring_offset;
- outb(word>>8, E33G_DMAAH);
- outb(word&0xFF, E33G_DMAAL);
-
- outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT
- | ECNTRL_START, E33G_CNTRL);
-
-/*
- * Here I also try to get data as fast as possible. I am betting that I
- * can read one extra byte without clobbering anything in the kernel because
- * this would only occur on an odd byte-count and allocation of skb->data
- * is word-aligned. Variable 'count' is NOT checked. Caller must check
- * for a valid count.
- * [This is currently quite safe.... but if one day the 3c503 explodes
- * you know where to come looking ;)]
- */
-
- buf = (unsigned short int *) skb->data;
- count = (count + 1) >> 1;
- for(;;)
- {
- boguscount = 0x1000;
- while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0)
- {
- if(!boguscount--)
- {
- pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);
- el2_reset_8390(dev);
- goto blocked;
- }
- }
- if(count > WRD_COUNT)
- {
- insw(E33G_FIFOH, buf, WRD_COUNT);
- buf += WRD_COUNT;
- count -= WRD_COUNT;
- }
- else
- {
- insw(E33G_FIFOH, buf, count);
- break;
- }
- }
- blocked:;
- outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);
-}
-
-
-static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- snprintf(info->bus_info, sizeof(info->bus_info), "ISA 0x%lx",
- dev->base_addr);
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
-};
-
-#ifdef MODULE
-#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */
-
-static struct net_device *dev_el2[MAX_EL2_CARDS];
-static int io[MAX_EL2_CARDS];
-static int irq[MAX_EL2_CARDS];
-static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(xcvr, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
-MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-int __init
-init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
- if (io[this_dev] == 0) {
- if (this_dev != 0) break; /* only autoprobe 1st one */
- pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");
- }
- dev = alloc_eip_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
- if (do_el2_probe(dev) == 0) {
- dev_el2[found++] = dev;
- continue;
- }
- free_netdev(dev);
- pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- /* NB: el2_close() handles free_irq */
- release_region(dev->base_addr, EL2_IO_EXTENT);
- if (ei_status.mem)
- iounmap(ei_status.mem);
-}
-
-void __exit
-cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {
- struct net_device *dev = dev_el2[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
diff --git a/drivers/net/ethernet/8390/3c503.h b/drivers/net/ethernet/8390/3c503.h
deleted file mode 100644
index e2367b82a2ec..000000000000
--- a/drivers/net/ethernet/8390/3c503.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* Definitions for the 3Com 3c503 Etherlink 2. */
-/* This file is distributed under the GPL.
- Many of these names and comments are directly from the Crynwr packet
- drivers, which are released under the GPL. */
-
-#define EL2H (dev->base_addr + 0x400)
-#define EL2L (dev->base_addr)
-
-/* Vendor unique hardware addr. prefix. 3Com has 2 because they ran
- out of available addresses on the first one... */
-
-#define OLD_3COM_ID 0x02608c
-#define NEW_3COM_ID 0x0020af
-
-/* Shared memory management parameters. NB: The 8 bit cards have only
- one bank (MB1) which serves both Tx and Rx packet space. The 16bit
- cards have 2 banks, MB0 for Tx packets, and MB1 for Rx packets.
- You choose which bank appears in the sh. mem window with EGACFR_MBSn */
-
-#define EL2_MB0_START_PG (0x00) /* EL2/16 Tx packets go in bank 0 */
-#define EL2_MB1_START_PG (0x20) /* First page of bank 1 */
-#define EL2_MB1_STOP_PG (0x40) /* Last page +1 of bank 1 */
-
-/* 3Com 3c503 ASIC registers */
-#define E33G_STARTPG (EL2H+0) /* Start page, matching EN0_STARTPG */
-#define E33G_STOPPG (EL2H+1) /* Stop page, must match EN0_STOPPG */
-#define E33G_DRQCNT (EL2H+2) /* DMA burst count */
-#define E33G_IOBASE (EL2H+3) /* Read of I/O base jumpers. */
- /* (non-useful, but it also appears at the end of EPROM space) */
-#define E33G_ROMBASE (EL2H+4) /* Read of memory base jumpers. */
-#define E33G_GACFR (EL2H+5) /* Config/setup bits for the ASIC GA */
-#define E33G_CNTRL (EL2H+6) /* Board's main control register */
-#define E33G_STATUS (EL2H+7) /* Status on completions. */
-#define E33G_IDCFR (EL2H+8) /* Interrupt/DMA config register */
- /* (Which IRQ to assert, DMA chan to use) */
-#define E33G_DMAAH (EL2H+9) /* High byte of DMA address reg */
-#define E33G_DMAAL (EL2H+10) /* Low byte of DMA address reg */
-/* "Vector pointer" - if this address matches a read, the EPROM (rather than
- shared RAM) is mapped into memory space. */
-#define E33G_VP2 (EL2H+11)
-#define E33G_VP1 (EL2H+12)
-#define E33G_VP0 (EL2H+13)
-#define E33G_FIFOH (EL2H+14) /* FIFO for programmed I/O moves */
-#define E33G_FIFOL (EL2H+15) /* ... low byte of above. */
-
-/* Bits in E33G_CNTRL register: */
-
-#define ECNTRL_RESET (0x01) /* Software reset of the ASIC and 8390 */
-#define ECNTRL_THIN (0x02) /* Onboard xcvr enable, AUI disable */
-#define ECNTRL_AUI (0x00) /* Onboard xcvr disable, AUI enable */
-#define ECNTRL_SAPROM (0x04) /* Map the station address prom */
-#define ECNTRL_DBLBFR (0x20) /* FIFO configuration bit */
-#define ECNTRL_OUTPUT (0x40) /* PC-to-3C503 direction if 1 */
-#define ECNTRL_INPUT (0x00) /* 3C503-to-PC direction if 0 */
-#define ECNTRL_START (0x80) /* Start the DMA logic */
-
-/* Bits in E33G_STATUS register: */
-
-#define ESTAT_DPRDY (0x80) /* Data port (of FIFO) ready */
-#define ESTAT_UFLW (0x40) /* Tried to read FIFO when it was empty */
-#define ESTAT_OFLW (0x20) /* Tried to write FIFO when it was full */
-#define ESTAT_DTC (0x10) /* Terminal Count from PC bus DMA logic */
-#define ESTAT_DIP (0x08) /* DMA In Progress */
-
-/* Bits in E33G_GACFR register: */
-
-#define EGACFR_NIM (0x80) /* NIC interrupt mask */
-#define EGACFR_TCM (0x40) /* DMA term. count interrupt mask */
-#define EGACFR_RSEL (0x08) /* Map a bank of card mem into system mem */
-#define EGACFR_MBS2 (0x04) /* Memory bank select, bit 2. */
-#define EGACFR_MBS1 (0x02) /* Memory bank select, bit 1. */
-#define EGACFR_MBS0 (0x01) /* Memory bank select, bit 0. */
-
-#define EGACFR_NORM (0x49) /* TCM | RSEL | MBS0 */
-#define EGACFR_IRQOFF (0xc9) /* TCM | RSEL | MBS0 | NIM */
-
-/*
- MBS2 MBS1 MBS0 Sh. mem windows card mem at:
- ---- ---- ---- -----------------------------
- 0 0 0 0x0000 -- bank 0
- 0 0 1 0x2000 -- bank 1 (only choice for 8bit card)
- 0 1 0 0x4000 -- bank 2, not used
- 0 1 1 0x6000 -- bank 3, not used
-
-There was going to be a 32k card that used bank 2 and 3, but it
-never got produced.
-
-*/
-
-
-/* End of 3C503 parameter definitions */
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index e49a44221800..1b78ca7a9786 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -21,18 +21,6 @@ config NET_VENDOR_8390
if NET_VENDOR_8390
-config EL2
- tristate "3c503 \"EtherLink II\" support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c503.
-
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
@@ -62,42 +50,6 @@ config AX88796_93CX6
---help---
Select this if your platform comes with an external 93CX6 eeprom.
-config E2100
- tristate "Cabletron E21xx support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
config HYDRA
tristate "Hydra support"
depends on ZORRO
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index e8bb97cd355f..588954a79b2a 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -6,10 +6,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c
deleted file mode 100644
index ed55ce85ebbf..000000000000
--- a/drivers/net/ethernet/8390/e2100.c
+++ /dev/null
@@ -1,489 +0,0 @@
-/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */
-/*
- Written 1993-1994 by Donald Becker.
-
- Copyright 1994 by Donald Becker.
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency. This software may be used and
- distributed according to the terms of the GNU General Public License,
- incorporated herein by reference.
-
- This is a driver for the Cabletron E2100 series ethercards.
-
- The Author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- The E2100 series ethercard is a fairly generic shared memory 8390
- implementation. The only unusual aspect is the way the shared memory
- registers are set: first you do an inb() in what is normally the
- station address region, and the low three bits of next outb() *address*
- is used as the write value for that register. Either someone wasn't
- too used to dem bit en bites, or they were trying to obfuscate the
- programming interface.
-
- There is an additional complication when setting the window on the packet
- buffer. You must first do a read into the packet buffer region with the
- low 8 address bits the address setting the page for the start of the packet
- buffer window, and then do the above operation. See mem_on() for details.
-
- One bug on the chip is that even a hard reset won't disable the memory
- window, usually resulting in a hung machine if mem_off() isn't called.
- If this happens, you must power down the machine for about 30 seconds.
-*/
-
-static const char version[] =
- "e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "e2100"
-
-static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0};
-
-/* Offsets from the base_addr.
- Read from the ASIC register, and the low three bits of the next outb()
- address is used to set the corresponding register. */
-#define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */
-#define E21_ASIC 0x10
-#define E21_MEM_ENABLE 0x10
-#define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */
-#define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */
-#define E21_MEM_BASE 0x11
-#define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */
-#define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */
-#define E21_MEDIA 0x14 /* (alias). */
-#define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */
-#define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */
-#define E21_SAPROM 0x10 /* Offset to station address data. */
-#define E21_IO_EXTENT 0x20
-
-static inline void mem_on(short port, volatile char __iomem *mem_base,
- unsigned char start_page )
-{
- /* This is a little weird: set the shared memory window by doing a
- read. The low address bits specify the starting page. */
- readb(mem_base+start_page);
- inb(port + E21_MEM_ENABLE);
- outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON);
-}
-
-static inline void mem_off(short port)
-{
- inb(port + E21_MEM_ENABLE);
- outb(0x00, port + E21_MEM_ENABLE);
-}
-
-/* In other drivers I put the TX pages first, but the E2100 window circuitry
- is designed to have a 4K Tx region last. The windowing circuitry wraps the
- window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring
- appear contiguously in the window. */
-#define E21_RX_START_PG 0x00 /* First page of RX buffer */
-#define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */
-#define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */
-#define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */
-
-static int e21_probe1(struct net_device *dev, int ioaddr);
-
-static int e21_open(struct net_device *dev);
-static void e21_reset_8390(struct net_device *dev);
-static void e21_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void e21_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static int e21_open(struct net_device *dev);
-static int e21_close(struct net_device *dev);
-
-
-/* Probe for the E2100 series ethercards. These cards have an 8390 at the
- base address and the station address at both offset 0x10 and 0x18. I read
- the station address from offset 0x18 to avoid the dataport of NE2000
- ethercards, and look for Ctron's unique ID (first three octets of the
- station address).
- */
-
-static int __init do_e2100_probe(struct net_device *dev)
-{
- int *port;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return e21_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (port = e21_probe_list; *port; port++) {
- dev->irq = irq;
- if (e21_probe1(dev, *port) == 0)
- return 0;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init e2100_probe(int unit)
-{
- struct net_device *dev = alloc_ei_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_e2100_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops e21_netdev_ops = {
- .ndo_open = e21_open,
- .ndo_stop = e21_close,
-
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_rx_mode = ei_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
-#endif
-};
-
-static int __init e21_probe1(struct net_device *dev, int ioaddr)
-{
- int i, status, retval;
- unsigned char *station_addr = dev->dev_addr;
- static unsigned version_printed;
-
- if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- /* First check the station address for the Ctron prefix. */
- if (inb(ioaddr + E21_SAPROM + 0) != 0x00 ||
- inb(ioaddr + E21_SAPROM + 1) != 0x00 ||
- inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
- retval = -ENODEV;
- goto out;
- }
-
- /* Verify by making certain that there is a 8390 at there. */
- outb(E8390_NODMA + E8390_STOP, ioaddr);
- udelay(1); /* we want to delay one I/O cycle - which is 2MHz */
- status = inb(ioaddr);
- if (status != 0x21 && status != 0x23) {
- retval = -ENODEV;
- goto out;
- }
-
- /* Read the station address PROM. */
- for (i = 0; i < 6; i++)
- station_addr[i] = inb(ioaddr + E21_SAPROM + i);
-
- inb(ioaddr + E21_MEDIA); /* Point to media selection. */
- outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */
-
- if (ei_debug && version_printed++ == 0)
- printk(version);
-
- for (i = 0; i < 6; i++)
- printk(" %02X", station_addr[i]);
-
- if (dev->irq < 2) {
- static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4};
- for (i = 0; i < ARRAY_SIZE(irqlist); i++)
- if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
- dev->irq = irqlist[i];
- break;
- }
- if (i >= ARRAY_SIZE(irqlist)) {
- printk(" unable to get IRQ %d.\n", dev->irq);
- retval = -EAGAIN;
- goto out;
- }
- } else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */
- dev->irq = 9;
-
- /* The 8390 is at the base address. */
- dev->base_addr = ioaddr;
-
- ei_status.name = "E2100";
- ei_status.word16 = 1;
- ei_status.tx_start_page = E21_TX_START_PG;
- ei_status.rx_start_page = E21_RX_START_PG;
- ei_status.stop_page = E21_RX_STOP_PG;
- ei_status.saved_irq = dev->irq;
-
- /* Check the media port used. The port can be passed in on the
- low mem_end bits. */
- if (dev->mem_end & 15)
- dev->if_port = dev->mem_end & 7;
- else {
- dev->if_port = 0;
- inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */
- for(i = 0; i < 6; i++)
- if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) {
- dev->if_port = 1;
- break;
- }
- }
-
- /* Never map in the E21 shared memory unless you are actively using it.
- Also, the shared memory has effective only one setting -- spread all
- over the 128K region! */
- if (dev->mem_start == 0)
- dev->mem_start = 0xd0000;
-
- ei_status.mem = ioremap(dev->mem_start, 2*1024);
- if (!ei_status.mem) {
- printk("unable to remap memory\n");
- retval = -EAGAIN;
- goto out;
- }
-
-#ifdef notdef
- /* These values are unused. The E2100 has a 2K window into the packet
- buffer. The window can be set to start on any page boundary. */
- ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
- dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024;
-#endif
-
- printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
- dev->if_port ? "secondary" : "primary", dev->mem_start);
-
- ei_status.reset_8390 = &e21_reset_8390;
- ei_status.block_input = &e21_block_input;
- ei_status.block_output = &e21_block_output;
- ei_status.get_8390_hdr = &e21_get_8390_hdr;
-
- dev->netdev_ops = &e21_netdev_ops;
- NS8390_init(dev, 0);
-
- retval = register_netdev(dev);
- if (retval)
- goto out;
- return 0;
-out:
- release_region(ioaddr, E21_IO_EXTENT);
- return retval;
-}
-
-static int
-e21_open(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
- int retval;
-
- if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
- return retval;
-
- /* Set the interrupt line and memory base on the hardware. */
- inb(ioaddr + E21_IRQ_LOW);
- outb(0, ioaddr + E21_ASIC + (dev->irq & 7));
- inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
- outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0)
- + (dev->if_port ? E21_ALT_IFPORT : 0));
- inb(ioaddr + E21_MEM_BASE);
- outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7));
-
- ei_open(dev);
- return 0;
-}
-
-static void
-e21_reset_8390(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
-
- outb(0x01, ioaddr);
- if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
- ei_status.txing = 0;
-
- /* Set up the ASIC registers, just in case something changed them. */
-
- if (ei_debug > 1) printk("reset done\n");
-}
-
-/* Grab the 8390 specific header. We put the 2k window so the header page
- appears at the start of the shared memory. */
-
-static void
-e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
-
- short ioaddr = dev->base_addr;
- char __iomem *shared_mem = ei_status.mem;
-
- mem_on(ioaddr, shared_mem, ring_page);
-
-#ifdef notdef
- /* Officially this is what we are doing, but the readl() is faster */
- memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr));
-#else
- ((unsigned int*)hdr)[0] = readl(shared_mem);
-#endif
-
- /* Turn off memory access: we would need to reprogram the window anyway. */
- mem_off(ioaddr);
-
-}
-
-/* Block input and output are easy on shared memory ethercards.
- The E21xx makes block_input() especially easy by wrapping the top
- ring buffer to the bottom automatically. */
-static void
-e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- short ioaddr = dev->base_addr;
- char __iomem *shared_mem = ei_status.mem;
-
- mem_on(ioaddr, shared_mem, (ring_offset>>8));
-
- memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count);
-
- mem_off(ioaddr);
-}
-
-static void
-e21_block_output(struct net_device *dev, int count, const unsigned char *buf,
- int start_page)
-{
- short ioaddr = dev->base_addr;
- volatile char __iomem *shared_mem = ei_status.mem;
-
- /* Set the shared memory window start by doing a read, with the low address
- bits specifying the starting page. */
- readb(shared_mem + start_page);
- mem_on(ioaddr, shared_mem, start_page);
-
- memcpy_toio(shared_mem, buf, count);
- mem_off(ioaddr);
-}
-
-static int
-e21_close(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
-
- if (ei_debug > 1)
- printk("%s: Shutting down ethercard.\n", dev->name);
-
- free_irq(dev->irq, dev);
- dev->irq = ei_status.saved_irq;
-
- /* Shut off the interrupt line and secondary interface. */
- inb(ioaddr + E21_IRQ_LOW);
- outb(0, ioaddr + E21_ASIC);
- inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
- outb(0, ioaddr + E21_ASIC);
-
- ei_close(dev);
-
- /* Double-check that the memory has been turned off, because really
- really bad things happen if it isn't. */
- mem_off(ioaddr);
-
- return 0;
-}
-
-
-#ifdef MODULE
-#define MAX_E21_CARDS 4 /* Max number of E21 cards per module */
-static struct net_device *dev_e21[MAX_E21_CARDS];
-static int io[MAX_E21_CARDS];
-static int irq[MAX_E21_CARDS];
-static int mem[MAX_E21_CARDS];
-static int xcvr[MAX_E21_CARDS]; /* choose int. or ext. xcvr */
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param_array(xcvr, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s)");
-MODULE_PARM_DESC(mem, " memory base address(es)");
-MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
-MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-
-int __init init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
- if (io[this_dev] == 0) {
- if (this_dev != 0) break; /* only autoprobe 1st one */
- printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n");
- }
- dev = alloc_ei_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- dev->mem_start = mem[this_dev];
- dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
- if (do_e2100_probe(dev) == 0) {
- dev_e21[found++] = dev;
- continue;
- }
- free_netdev(dev);
- printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- /* NB: e21_close() handles free_irq */
- iounmap(ei_status.mem);
- release_region(dev->base_addr, E21_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
- struct net_device *dev = dev_e21[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
deleted file mode 100644
index 52f70f999c00..000000000000
--- a/drivers/net/ethernet/8390/hp-plus.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */
-/*
- Written 1994 by Donald Becker.
-
- This driver is for the Hewlett Packard PC LAN (27***) plus ethercards.
- These cards are sold under several model numbers, usually 2724*.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- As is often the case, a great deal of credit is owed to Russ Nelson.
- The Crynwr packet driver was my primary source of HP-specific
- programming information.
-*/
-
-static const char version[] =
-"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include <linux/module.h>
-
-#include <linux/string.h> /* Important -- this inlines word moves. */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "hp-plus"
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int hpplus_portlist[] __initdata =
-{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
-
-/*
- The HP EtherTwist chip implementation is a fairly routine DP8390
- implementation. It allows both shared memory and programmed-I/O buffer
- access, using a custom interface for both. The programmed-I/O mode is
- entirely implemented in the HP EtherTwist chip, bypassing the problem
- ridden built-in 8390 facilities used on NE2000 designs. The shared
- memory mode is likewise special, with an offset register used to make
- packets appear at the shared memory base. Both modes use a base and bounds
- page register to hide the Rx ring buffer wrap -- a packet that spans the
- end of physical buffer memory appears continuous to the driver. (c.f. the
- 3c503 and Cabletron E2100)
-
- A special note: the internal buffer of the board is only 8 bits wide.
- This lays several nasty traps for the unaware:
- - the 8390 must be programmed for byte-wide operations
- - all I/O and memory operations must work on whole words (the access
- latches are serially preloaded and have no byte-swapping ability).
-
- This board is laid out in I/O space much like the earlier HP boards:
- the first 16 locations are for the board registers, and the second 16 are
- for the 8390. The board is easy to identify, with both a dedicated 16 bit
- ID register and a constant 0x530* value in the upper bits of the paging
- register.
-*/
-
-#define HP_ID 0x00 /* ID register, always 0x4850. */
-#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */
-#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */
-#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */
-#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */
-#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */
-#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */
-#define HP_IO_EXTENT 32
-
-#define HP_START_PG 0x00 /* First page of TX buffer */
-#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-/* The register set selected in HP_PAGING. */
-enum PageName {
- Perf_Page = 0, /* Normal operation. */
- MAC_Page = 1, /* The ethernet address (+checksum). */
- HW_Page = 2, /* EEPROM-loaded hardware parameters. */
- LAN_Page = 4, /* Transceiver selection, testing, etc. */
- ID_Page = 6 };
-
-/* The bit definitions for the HPP_OPTION register. */
-enum HP_Option {
- NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */
- EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
- MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
-
-static int hpp_probe1(struct net_device *dev, int ioaddr);
-
-static void hpp_reset_8390(struct net_device *dev);
-static int hpp_open(struct net_device *dev);
-static int hpp_close(struct net_device *dev);
-static void hpp_mem_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void hpp_mem_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void hpp_io_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void hpp_io_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-
-
-/* Probe a list of addresses for an HP LAN+ adaptor.
- This routine is almost boilerplate. */
-
-static int __init do_hpp_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return hpp_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; hpplus_portlist[i]; i++) {
- if (hpp_probe1(dev, hpplus_portlist[i]) == 0)
- return 0;
- dev->irq = irq;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init hp_plus_probe(int unit)
-{
- struct net_device *dev = alloc_eip_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_hpp_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops hpp_netdev_ops = {
- .ndo_open = hpp_open,
- .ndo_stop = hpp_close,
- .ndo_start_xmit = eip_start_xmit,
- .ndo_tx_timeout = eip_tx_timeout,
- .ndo_get_stats = eip_get_stats,
- .ndo_set_rx_mode = eip_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = eip_poll,
-#endif
-};
-
-
-/* Do the interesting part of the probe at a single address. */
-static int __init hpp_probe1(struct net_device *dev, int ioaddr)
-{
- int i, retval;
- unsigned char checksum = 0;
- const char name[] = "HP-PC-LAN+";
- int mem_start;
- static unsigned version_printed;
-
- if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- /* Check for the HP+ signature, 50 48 0x 53. */
- if (inw(ioaddr + HP_ID) != 0x4850 ||
- (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
- retval = -ENODEV;
- goto out;
- }
-
- if (ei_debug && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s at %#3x, ", dev->name, name, ioaddr);
-
- /* Retrieve and checksum the station address. */
- outw(MAC_Page, ioaddr + HP_PAGING);
-
- for(i = 0; i < ETH_ALEN; i++) {
- unsigned char inval = inb(ioaddr + 8 + i);
- dev->dev_addr[i] = inval;
- checksum += inval;
- }
- checksum += inb(ioaddr + 14);
-
- printk("%pM", dev->dev_addr);
-
- if (checksum != 0xff) {
- printk(" bad checksum %2.2x.\n", checksum);
- retval = -ENODEV;
- goto out;
- } else {
- /* Point at the Software Configuration Flags. */
- outw(ID_Page, ioaddr + HP_PAGING);
- printk(" ID %4.4x", inw(ioaddr + 12));
- }
-
- /* Read the IRQ line. */
- outw(HW_Page, ioaddr + HP_PAGING);
- {
- int irq = inb(ioaddr + 13) & 0x0f;
- int option = inw(ioaddr + HPP_OPTION);
-
- dev->irq = irq;
- if (option & MemEnable) {
- mem_start = inw(ioaddr + 9) << 8;
- printk(", IRQ %d, memory address %#x.\n", irq, mem_start);
- } else {
- mem_start = 0;
- printk(", IRQ %d, programmed-I/O mode.\n", irq);
- }
- }
-
- /* Set the wrap registers for string I/O reads. */
- outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = ioaddr + NIC_OFFSET;
-
- dev->netdev_ops = &hpp_netdev_ops;
-
- ei_status.name = name;
- ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */
- ei_status.tx_start_page = HP_START_PG;
- ei_status.rx_start_page = HP_START_PG + TX_PAGES/2;
- ei_status.stop_page = HP_STOP_PG;
-
- ei_status.reset_8390 = &hpp_reset_8390;
- ei_status.block_input = &hpp_io_block_input;
- ei_status.block_output = &hpp_io_block_output;
- ei_status.get_8390_hdr = &hpp_io_get_8390_hdr;
-
- /* Check if the memory_enable flag is set in the option register. */
- if (mem_start) {
- ei_status.block_input = &hpp_mem_block_input;
- ei_status.block_output = &hpp_mem_block_output;
- ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr;
- dev->mem_start = mem_start;
- ei_status.mem = ioremap(mem_start,
- (HP_STOP_PG - HP_START_PG)*256);
- if (!ei_status.mem) {
- retval = -ENOMEM;
- goto out;
- }
- ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256;
- dev->mem_end = ei_status.rmem_end
- = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256;
- }
-
- outw(Perf_Page, ioaddr + HP_PAGING);
- NS8390p_init(dev, 0);
- /* Leave the 8390 and HP chip reset. */
- outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
-
- retval = register_netdev(dev);
- if (retval)
- goto out1;
- return 0;
-out1:
- iounmap(ei_status.mem);
-out:
- release_region(ioaddr, HP_IO_EXTENT);
- return retval;
-}
-
-static int
-hpp_open(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg;
- int retval;
-
- if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
- return retval;
- }
-
- /* Reset the 8390 and HP chip. */
- option_reg = inw(ioaddr + HPP_OPTION);
- outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
- udelay(5);
- /* Unreset the board and enable interrupts. */
- outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
-
- /* Set the wrap registers for programmed-I/O operation. */
- outw(HW_Page, ioaddr + HP_PAGING);
- outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
-
- /* Select the operational page. */
- outw(Perf_Page, ioaddr + HP_PAGING);
-
- return eip_open(dev);
-}
-
-static int
-hpp_close(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- free_irq(dev->irq, dev);
- eip_close(dev);
- outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
- ioaddr + HPP_OPTION);
-
- return 0;
-}
-
-static void
-hpp_reset_8390(struct net_device *dev)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
-
- outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
- /* Pause a few cycles for the hardware reset to take place. */
- udelay(5);
- ei_status.txing = 0;
- outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
-
- udelay(5);
-
-
- if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
- printk("%s: hp_reset_8390() did not complete.\n", dev->name);
-
- if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
-}
-
-/* The programmed-I/O version of reading the 4 byte 8390 specific header.
- Note that transfer with the EtherTwist+ must be on word boundaries. */
-
-static void
-hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
-
- outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
- insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. */
-
-static void
-hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- char *buf = skb->data;
-
- outw(ring_offset, ioaddr + HPP_IN_ADDR);
- insw(ioaddr + HP_DATAPORT, buf, count>>1);
- if (count & 0x01)
- buf[count-1] = inw(ioaddr + HP_DATAPORT);
-}
-
-/* The corresponding shared memory versions of the above 2 functions. */
-
-static void
-hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
- memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr));
- outw(option_reg, ioaddr + HPP_OPTION);
- hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */
-}
-
-static void
-hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw(ring_offset, ioaddr + HPP_IN_ADDR);
-
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
-
- /* Caution: this relies on get_8390_hdr() rounding up count!
- Also note that we *can't* use eth_io_copy_and_sum() because
- it will not always copy "count" bytes (e.g. padded IP). */
-
- memcpy_fromio(skb->data, ei_status.mem, count);
- outw(option_reg, ioaddr + HPP_OPTION);
-}
-
-/* A special note: we *must* always transfer >=16 bit words.
- It's always safe to round up, so we do. */
-static void
-hpp_io_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
- outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
-}
-
-static void
-hpp_mem_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int ioaddr = dev->base_addr - NIC_OFFSET;
- int option_reg = inw(ioaddr + HPP_OPTION);
-
- outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
- outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
- memcpy_toio(ei_status.mem, buf, (count + 3) & ~3);
- outw(option_reg, ioaddr + HPP_OPTION);
-}
-
-
-#ifdef MODULE
-#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */
-static struct net_device *dev_hpp[MAX_HPP_CARDS];
-static int io[MAX_HPP_CARDS];
-static int irq[MAX_HPP_CARDS];
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O port address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected");
-MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-int __init
-init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
- if (io[this_dev] == 0) {
- if (this_dev != 0) break; /* only autoprobe 1st one */
- printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
- }
- dev = alloc_eip_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- if (do_hpp_probe(dev) == 0) {
- dev_hpp[found++] = dev;
- continue;
- }
- free_netdev(dev);
- printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- /* NB: hpp_close() handles free_irq */
- iounmap(ei_status.mem);
- release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
- struct net_device *dev = dev_hpp[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
deleted file mode 100644
index 37fa89aa4578..000000000000
--- a/drivers/net/ethernet/8390/hp.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/* hp.c: A HP LAN ethernet driver for linux. */
-/*
- Written 1993-94 by Donald Becker.
-
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- This is a driver for the HP PC-LAN adaptors.
-
- Sources:
- The Crynwr packet driver.
-*/
-
-static const char version[] =
- "hp.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "hp"
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int hppclan_portlist[] __initdata =
-{ 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240, 0};
-
-#define HP_IO_EXTENT 32
-
-#define HP_DATAPORT 0x0c /* "Remote DMA" data port. */
-#define HP_ID 0x07
-#define HP_CONFIGURE 0x08 /* Configuration register. */
-#define HP_RUN 0x01 /* 1 == Run, 0 == reset. */
-#define HP_IRQ 0x0E /* Mask for software-configured IRQ line. */
-#define HP_DATAON 0x10 /* Turn on dataport */
-#define NIC_OFFSET 0x10 /* Offset the 8390 registers. */
-
-#define HP_START_PG 0x00 /* First page of TX buffer */
-#define HP_8BSTOP_PG 0x80 /* Last page +1 of RX ring */
-#define HP_16BSTOP_PG 0xFF /* Same, for 16 bit cards. */
-
-static int hp_probe1(struct net_device *dev, int ioaddr);
-
-static void hp_reset_8390(struct net_device *dev);
-static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void hp_block_input(struct net_device *dev, int count,
- struct sk_buff *skb , int ring_offset);
-static void hp_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-
-static void hp_init_card(struct net_device *dev);
-
-/* The map from IRQ number to HP_CONFIGURE register setting. */
-/* My default is IRQ5 0 1 2 3 4 5 6 7 8 9 10 11 */
-static char irqmap[16] __initdata= { 0, 0, 4, 6, 8,10, 0,14, 0, 4, 2,12,0,0,0,0};
-
-
-/* Probe for an HP LAN adaptor.
- Also initialize the card and fill in STATION_ADDR with the station
- address. */
-
-static int __init do_hp_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return hp_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; hppclan_portlist[i]; i++) {
- if (hp_probe1(dev, hppclan_portlist[i]) == 0)
- return 0;
- dev->irq = irq;
- }
-
- return -ENODEV;
-}
-
-#ifndef MODULE
-struct net_device * __init hp_probe(int unit)
-{
- struct net_device *dev = alloc_eip_netdev();
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_hp_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static int __init hp_probe1(struct net_device *dev, int ioaddr)
-{
- int i, retval, board_id, wordmode;
- const char *name;
- static unsigned version_printed;
-
- if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- /* Check for the HP physical address, 08 00 09 xx xx xx. */
- /* This really isn't good enough: we may pick up HP LANCE boards
- also! Avoid the lance 0x5757 signature. */
- if (inb(ioaddr) != 0x08
- || inb(ioaddr+1) != 0x00
- || inb(ioaddr+2) != 0x09
- || inb(ioaddr+14) == 0x57) {
- retval = -ENODEV;
- goto out;
- }
-
- /* Set up the parameters based on the board ID.
- If you have additional mappings, please mail them to me -djb. */
- if ((board_id = inb(ioaddr + HP_ID)) & 0x80) {
- name = "HP27247";
- wordmode = 1;
- } else {
- name = "HP27250";
- wordmode = 0;
- }
-
- if (ei_debug && version_printed++ == 0)
- printk(version);
-
- printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
-
- for(i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = inb(ioaddr + i);
-
- printk(" %pM", dev->dev_addr);
-
- /* Snarf the interrupt now. Someday this could be moved to open(). */
- if (dev->irq < 2) {
- static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
- static const int irq_8list[] = { 7, 5, 3, 4, 9, 0};
- const int *irqp = wordmode ? irq_16list : irq_8list;
- do {
- int irq = *irqp;
- if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
- unsigned long cookie = probe_irq_on();
- /* Twinkle the interrupt, and check if it's seen. */
- outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
- outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE);
- if (irq == probe_irq_off(cookie) /* It's a good IRQ line! */
- && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) {
- printk(" selecting IRQ %d.\n", irq);
- dev->irq = *irqp;
- break;
- }
- }
- } while (*++irqp);
- if (*irqp == 0) {
- printk(" no free IRQ lines.\n");
- retval = -EBUSY;
- goto out;
- }
- } else {
- if (dev->irq == 2)
- dev->irq = 9;
- if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) {
- printk (" unable to get IRQ %d.\n", dev->irq);
- goto out;
- }
- }
-
- /* Set the base address to point to the NIC, not the "real" base! */
- dev->base_addr = ioaddr + NIC_OFFSET;
- dev->netdev_ops = &eip_netdev_ops;
-
- ei_status.name = name;
- ei_status.word16 = wordmode;
- ei_status.tx_start_page = HP_START_PG;
- ei_status.rx_start_page = HP_START_PG + TX_PAGES;
- ei_status.stop_page = wordmode ? HP_16BSTOP_PG : HP_8BSTOP_PG;
-
- ei_status.reset_8390 = hp_reset_8390;
- ei_status.get_8390_hdr = hp_get_8390_hdr;
- ei_status.block_input = hp_block_input;
- ei_status.block_output = hp_block_output;
- hp_init_card(dev);
-
- retval = register_netdev(dev);
- if (retval)
- goto out1;
- return 0;
-out1:
- free_irq(dev->irq, dev);
-out:
- release_region(ioaddr, HP_IO_EXTENT);
- return retval;
-}
-
-static void
-hp_reset_8390(struct net_device *dev)
-{
- int hp_base = dev->base_addr - NIC_OFFSET;
- int saved_config = inb_p(hp_base + HP_CONFIGURE);
-
- if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
- outb_p(0x00, hp_base + HP_CONFIGURE);
- ei_status.txing = 0;
- /* Pause just a few cycles for the hardware reset to take place. */
- udelay(5);
-
- outb_p(saved_config, hp_base + HP_CONFIGURE);
- udelay(5);
-
- if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
- printk("%s: hp_reset_8390() did not complete.\n", dev->name);
-
- if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
-}
-
-static void
-hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- int nic_base = dev->base_addr;
- int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
-
- outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
- outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
- outb_p(0, nic_base + EN0_RCNTHI);
- outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base);
-
- if (ei_status.word16)
- insw(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
- else
- insb(nic_base - NIC_OFFSET + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
-
- outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you are
- porting to a new ethercard look at the packet driver source for hints.
- The HP LAN doesn't use shared memory -- we put the packet
- out through the "remote DMA" dataport. */
-
-static void
-hp_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- int nic_base = dev->base_addr;
- int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
- int xfer_count = count;
- char *buf = skb->data;
-
- outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base);
- outb_p(count & 0xff, nic_base + EN0_RCNTLO);
- outb_p(count >> 8, nic_base + EN0_RCNTHI);
- outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
- outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base);
- if (ei_status.word16) {
- insw(nic_base - NIC_OFFSET + HP_DATAPORT,buf,count>>1);
- if (count & 0x01)
- buf[count-1] = inb(nic_base - NIC_OFFSET + HP_DATAPORT), xfer_count++;
- } else {
- insb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
- }
- /* This is for the ALPHA version only, remove for later releases. */
- if (ei_debug > 0) { /* DMA termination address check... */
- int high = inb_p(nic_base + EN0_RSARHI);
- int low = inb_p(nic_base + EN0_RSARLO);
- int addr = (high << 8) + low;
- /* Check only the lower 8 bits so we can ignore ring wrap. */
- if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff))
- printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
- dev->name, ring_offset + xfer_count, addr);
- }
- outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-static void
-hp_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int nic_base = dev->base_addr;
- int saved_config = inb_p(nic_base - NIC_OFFSET + HP_CONFIGURE);
-
- outb_p(saved_config | HP_DATAON, nic_base - NIC_OFFSET + HP_CONFIGURE);
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
- if (ei_status.word16 && (count & 0x01))
- count++;
- /* We should already be in page 0, but to be safe... */
- outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base);
-
-#ifdef NE8390_RW_BUGFIX
- /* Handle the read-before-write bug the same way as the
- Crynwr packet driver -- the NatSemi method doesn't work. */
- outb_p(0x42, nic_base + EN0_RCNTLO);
- outb_p(0, nic_base + EN0_RCNTHI);
- outb_p(0xff, nic_base + EN0_RSARLO);
- outb_p(0x00, nic_base + EN0_RSARHI);
-#define NE_CMD 0x00
- outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
- /* Make certain that the dummy read has occurred. */
- inb_p(0x61);
- inb_p(0x61);
-#endif
-
- outb_p(count & 0xff, nic_base + EN0_RCNTLO);
- outb_p(count >> 8, nic_base + EN0_RCNTHI);
- outb_p(0x00, nic_base + EN0_RSARLO);
- outb_p(start_page, nic_base + EN0_RSARHI);
-
- outb_p(E8390_RWRITE+E8390_START, nic_base);
- if (ei_status.word16) {
- /* Use the 'rep' sequence for 16 bit boards. */
- outsw(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count>>1);
- } else {
- outsb(nic_base - NIC_OFFSET + HP_DATAPORT, buf, count);
- }
-
- /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here -- it's broken! */
-
- /* This is for the ALPHA version only, remove for later releases. */
- if (ei_debug > 0) { /* DMA termination address check... */
- int high = inb_p(nic_base + EN0_RSARHI);
- int low = inb_p(nic_base + EN0_RSARLO);
- int addr = (high << 8) + low;
- if ((start_page << 8) + count != addr)
- printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
- dev->name, (start_page << 8) + count, addr);
- }
- outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-}
-
-/* This function resets the ethercard if something screws up. */
-static void __init
-hp_init_card(struct net_device *dev)
-{
- int irq = dev->irq;
- NS8390p_init(dev, 0);
- outb_p(irqmap[irq&0x0f] | HP_RUN,
- dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
-}
-
-#ifdef MODULE
-#define MAX_HP_CARDS 4 /* Max number of HP cards per module */
-static struct net_device *dev_hp[MAX_HP_CARDS];
-static int io[MAX_HP_CARDS];
-static int irq[MAX_HP_CARDS];
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_DESCRIPTION("HP PC-LAN ISA ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that only a single autoprobe takes place per call.
-ISA device autoprobes on a running machine are not recommended. */
-int __init
-init_module(void)
-{
- struct net_device *dev;
- int this_dev, found = 0;
-
- for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
- if (io[this_dev] == 0) {
- if (this_dev != 0) break; /* only autoprobe 1st one */
- printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
- }
- dev = alloc_eip_netdev();
- if (!dev)
- break;
- dev->irq = irq[this_dev];
- dev->base_addr = io[this_dev];
- if (do_hp_probe(dev) == 0) {
- dev_hp[found++] = dev;
- continue;
- }
- free_netdev(dev);
- printk(KERN_WARNING "hp.c: No HP card found (i/o = 0x%x).\n", io[this_dev]);
- break;
- }
- if (found)
- return 0;
- return -ENXIO;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- free_irq(dev->irq, dev);
- release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
-}
-
-void __exit
-cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_HP_CARDS; this_dev++) {
- struct net_device *dev = dev_hp[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */