summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-davinci/usb.c4
-rw-r--r--arch/arm/mach-omap2/Makefile6
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c17
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c5
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c14
-rw-r--r--arch/arm/mach-omap2/clock2420_data.c2
-rw-r--r--arch/arm/mach-omap2/clock2430_data.c2
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c8
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c149
-rw-r--r--arch/arm/mach-omap2/usb-musb.c102
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c2
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h9
-rw-r--r--arch/blackfin/mach-bf527/boards/ad7160eval.c2
-rw-r--r--arch/blackfin/mach-bf527/boards/cm_bf527.c2
-rw-r--r--arch/blackfin/mach-bf527/boards/ezbrd.c2
-rw-r--r--arch/blackfin/mach-bf527/boards/ezkit.c2
-rw-r--r--arch/blackfin/mach-bf527/boards/tll6527m.c2
-rw-r--r--arch/blackfin/mach-bf548/boards/cm_bf548.c2
-rw-r--r--arch/blackfin/mach-bf548/boards/ezkit.c2
-rw-r--r--drivers/mfd/twl-core.c44
-rw-r--r--drivers/mfd/twl6030-irq.c9
-rw-r--r--drivers/usb/gadget/gadget_chips.h2
-rw-r--r--drivers/usb/musb/Kconfig77
-rw-r--r--drivers/usb/musb/Makefile21
-rw-r--r--drivers/usb/musb/am35x.c410
-rw-r--r--drivers/usb/musb/blackfin.c229
-rw-r--r--drivers/usb/musb/da8xx.c170
-rw-r--r--drivers/usb/musb/davinci.c174
-rw-r--r--drivers/usb/musb/musb_core.c191
-rw-r--r--drivers/usb/musb/musb_core.h190
-rw-r--r--drivers/usb/musb/musb_io.h4
-rw-r--r--drivers/usb/musb/musb_regs.h4
-rw-r--r--drivers/usb/musb/musb_virthub.c2
-rw-r--r--drivers/usb/musb/omap2430.c374
-rw-r--r--drivers/usb/musb/tusb6010.c181
-rw-r--r--drivers/usb/musb/ux500.c216
-rw-r--r--drivers/usb/otg/Kconfig12
-rw-r--r--drivers/usb/otg/Makefile1
-rw-r--r--drivers/usb/otg/twl6030-usb.c493
-rw-r--r--include/linux/i2c/twl.h7
-rw-r--r--include/linux/usb/musb.h8
42 files changed, 2526 insertions, 629 deletions
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index b0d6b07431c0..23d2b6d9fa63 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -76,7 +76,7 @@ static struct resource usb_resources[] = {
static u64 usb_dmamask = DMA_BIT_MASK(32);
static struct platform_device usb_dev = {
- .name = "musb_hdrc",
+ .name = "musb-davinci",
.id = -1,
.dev = {
.platform_data = &usb_data,
@@ -112,6 +112,7 @@ static struct resource da8xx_usb20_resources[] = {
{
.start = IRQ_DA8XX_USB_INT,
.flags = IORESOURCE_IRQ,
+ .name = "mc",
},
};
@@ -123,6 +124,7 @@ int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
usb_dev.resource = da8xx_usb20_resources;
usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+ usb_dev.name = "musb-da8xx";
return platform_device_register(&usb_dev);
}
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 60e51bcf53bd..194863680fe0 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -168,9 +168,11 @@ obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o
+ hsmmc.o \
+ omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o
+ hsmmc.o \
+ omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index d7cb9680b4fa..5aef69521e36 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -238,10 +238,17 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
- .mode = MUSB_PERIPHERAL,
+ .mode = MUSB_OTG,
.power = 100,
};
+static struct twl4030_usb_data omap4_usbphy_data = {
+ .phy_init = omap4430_phy_init,
+ .phy_exit = omap4430_phy_exit,
+ .phy_power = omap4430_phy_power,
+ .phy_set_clock = omap4430_phy_set_clk,
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -461,6 +468,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
.vaux1 = &sdp4430_vaux1,
.vaux2 = &sdp4430_vaux2,
.vaux3 = &sdp4430_vaux3,
+ .usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
@@ -533,12 +541,7 @@ static void __init omap_4430sdp_init(void)
gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
}
usb_ehci_init(&ehci_pdata);
-
- /* OMAP4 SDP uses internal transceiver so register nop transceiver */
- usb_nop_xceiv_register();
- /* FIXME: allow multi-omap to boot until musb is updated for omap4 */
- if (!cpu_is_omap44xx())
- usb_musb_init(&musb_board_data);
+ usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e823c7042ab3..62e3ea007c76 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -46,8 +46,7 @@ static struct device *mmc_device;
#define TUSB6010_GPIO_ENABLE 0
#define TUSB6010_DMACHAN 0x3f
-#if defined(CONFIG_USB_TUSB6010) || \
- defined(CONFIG_USB_TUSB6010_MODULE)
+#ifdef CONFIG_USB_MUSB_TUSB6010
/*
* Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
* 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -134,7 +133,7 @@ err:
static void __init n8x0_usb_init(void) {}
-#endif /*CONFIG_USB_TUSB6010 */
+#endif /*CONFIG_USB_MUSB_TUSB6010 */
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1ecd0a6cefb7..9207c5849c0e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -133,10 +133,17 @@ error1:
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
- .mode = MUSB_PERIPHERAL,
+ .mode = MUSB_OTG,
.power = 100,
};
+static struct twl4030_usb_data omap4_usbphy_data = {
+ .phy_init = omap4430_phy_init,
+ .phy_exit = omap4430_phy_exit,
+ .phy_power = omap4430_phy_power,
+ .phy_set_clock = omap4430_phy_set_clk,
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -345,6 +352,7 @@ static struct twl4030_platform_data omap4_panda_twldata = {
.vaux1 = &omap4_panda_vaux1,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
+ .usb = &omap4_usbphy_data,
};
static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
@@ -377,9 +385,7 @@ static void __init omap4_panda_init(void)
/* OMAP4 Panda uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
omap4_ehci_init();
- /* FIXME: allow multi-omap to boot until musb is updated for omap4 */
- if (!cpu_is_omap44xx())
- usb_musb_init(&musb_board_data);
+ usb_musb_init(&musb_board_data);
}
static void __init omap4_panda_map_io(void)
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 21f856252ad8..831e25c89d2d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1877,7 +1877,7 @@ static struct omap_clk omap2420_clks[] = {
CLK("omap-aes", "ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
- CLK("musb_hdrc", "fck", &osc_ck, CK_242X),
+ CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index e32afcbdfb88..a9c60b7843e2 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1983,7 +1983,7 @@ static struct omap_clk omap2430_clks[] = {
CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
- CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
+ CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index a04cb03db51f..0579604d4f25 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3306,8 +3306,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
- CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
- CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
+ CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
@@ -3442,8 +3442,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("davinci_emac", "phy_clk", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
- CLK("musb_hdrc", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
- CLK("musb_hdrc", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
+ CLK("musb-am35x", "ick", &hsotgusb_ick_am35xx, CK_AM35XX),
+ CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
};
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index f473e8922664..bfcd19f8368c 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -2953,7 +2953,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK("ehci-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
- CLK("musb_hdrc", "ick", &usb_otg_hs_ick, CK_443X),
+ CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
new file mode 100644
index 000000000000..745252c60e32
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -0,0 +1,149 @@
+/*
+ * This file configures the internal USB PHY in OMAP4430. Used
+ * with TWL6030 transceiver and MUSB on OMAP4430.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+
+#include <plat/usb.h>
+
+/* OMAP control module register for UTMI PHY */
+#define CONTROL_DEV_CONF 0x300
+#define PHY_PD 0x1
+
+#define USBOTGHS_CONTROL 0x33c
+#define AVALID BIT(0)
+#define BVALID BIT(1)
+#define VBUSVALID BIT(2)
+#define SESSEND BIT(3)
+#define IDDIG BIT(4)
+
+static struct clk *phyclk, *clk48m, *clk32k;
+static void __iomem *ctrl_base;
+
+int omap4430_phy_init(struct device *dev)
+{
+ ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
+ if (!ctrl_base) {
+ dev_err(dev, "control module ioremap failed\n");
+ return -ENOMEM;
+ }
+ /* Power down the phy */
+ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
+
+ if (IS_ERR(phyclk)) {
+ dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
+ iounmap(ctrl_base);
+ return PTR_ERR(phyclk);
+ }
+
+ clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
+ if (IS_ERR(clk48m)) {
+ dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
+ clk_put(phyclk);
+ iounmap(ctrl_base);
+ return PTR_ERR(clk48m);
+ }
+
+ clk32k = clk_get(dev, "usb_phy_cm_clk32k");
+ if (IS_ERR(clk32k)) {
+ dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
+ clk_put(phyclk);
+ clk_put(clk48m);
+ iounmap(ctrl_base);
+ return PTR_ERR(clk32k);
+ }
+ return 0;
+}
+
+int omap4430_phy_set_clk(struct device *dev, int on)
+{
+ static int state;
+
+ if (on && !state) {
+ /* Enable the phy clocks */
+ clk_enable(phyclk);
+ clk_enable(clk48m);
+ clk_enable(clk32k);
+ state = 1;
+ } else if (state) {
+ /* Disable the phy clocks */
+ clk_disable(phyclk);
+ clk_disable(clk48m);
+ clk_disable(clk32k);
+ state = 0;
+ }
+ return 0;
+}
+
+int omap4430_phy_power(struct device *dev, int ID, int on)
+{
+ if (on) {
+ /* enabled the clocks */
+ omap4430_phy_set_clk(dev, 1);
+ /* power on the phy */
+ if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+ __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ mdelay(200);
+ }
+ if (ID)
+ /* enable VBUS valid, IDDIG groung */
+ __raw_writel(AVALID | VBUSVALID, ctrl_base +
+ USBOTGHS_CONTROL);
+ else
+ /*
+ * Enable VBUS Valid, AValid and IDDIG
+ * high impedence
+ */
+ __raw_writel(IDDIG | AVALID | VBUSVALID,
+ ctrl_base + USBOTGHS_CONTROL);
+ } else {
+ /* Enable session END and IDIG to high impedence. */
+ __raw_writel(SESSEND | IDDIG, ctrl_base +
+ USBOTGHS_CONTROL);
+ /* Disable the clocks */
+ omap4430_phy_set_clk(dev, 0);
+ /* Power down the phy */
+ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ }
+
+ return 0;
+}
+
+int omap4430_phy_exit(struct device *dev)
+{
+ if (ctrl_base)
+ iounmap(ctrl_base);
+ if (phyclk)
+ clk_put(phyclk);
+ if (clk48m)
+ clk_put(clk48m);
+ if (clk32k)
+ clk_put(clk32k);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8dae0fa5905e..5298949d4b11 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -30,8 +30,101 @@
#include <mach/irqs.h>
#include <mach/am35xx.h>
#include <plat/usb.h>
+#include "control.h"
-#ifdef CONFIG_USB_MUSB_SOC
+#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
+
+static void am35x_musb_reset(void)
+{
+ u32 regval;
+
+ /* Reset the musb interface */
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+ regval |= AM35XX_USBOTGSS_SW_RST;
+ omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+ regval &= ~AM35XX_USBOTGSS_SW_RST;
+ omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+static void am35x_musb_phy_power(u8 on)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+ u32 devconf2;
+
+ if (on) {
+ /*
+ * Start the on-chip PHY and its PLL.
+ */
+ devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+ devconf2 |= CONF2_PHY_PLLON;
+
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+ pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+ while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+ & CONF2_PHYCLKGD)) {
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ pr_err(KERN_ERR "musb PHY clock good timed out\n");
+ break;
+ }
+ }
+ } else {
+ /*
+ * Power down the on-chip PHY.
+ */
+ devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~CONF2_PHY_PLLON;
+ devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+ }
+}
+
+static void am35x_musb_clear_irq(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval |= AM35XX_USBOTGSS_INT_CLR;
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am35x_musb_set_mode(u8 musb_mode)
+{
+ u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+ devconf2 &= ~CONF2_OTGMODE;
+ switch (musb_mode) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ case MUSB_HOST: /* Force VBUS valid, ID = 0 */
+ devconf2 |= CONF2_FORCE_HOST;
+ break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
+ devconf2 |= CONF2_FORCE_DEVICE;
+ break;
+#endif
+#ifdef CONFIG_USB_MUSB_OTG
+ case MUSB_OTG: /* Don't override the VBUS/ID comparators */
+ devconf2 |= CONF2_NO_OVERRIDE;
+ break;
+#endif
+ default:
+ pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+ }
+
+ omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
@@ -77,7 +170,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-omap2430",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
@@ -93,8 +186,13 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
if (cpu_is_omap243x()) {
musb_resources[0].start = OMAP243X_HS_BASE;
} else if (cpu_is_omap3517() || cpu_is_omap3505()) {
+ musb_device.name = "musb-am35x";
musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
musb_resources[1].start = INT_35XX_USBOTG_IRQ;
+ board_data->set_phy_power = am35x_musb_phy_power;
+ board_data->clear_irq = am35x_musb_clear_irq;
+ board_data->set_mode = am35x_musb_set_mode;
+ board_data->reset = am35x_musb_reset;
} else if (cpu_is_omap34xx()) {
musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
} else if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 64a0112b70a5..7cb3c18a5e20 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -223,7 +223,7 @@ static struct resource tusb_resources[] = {
static u64 tusb_dmamask = ~(u32)0;
static struct platform_device tusb_device = {
- .name = "musb_hdrc",
+ .name = "musb-tusb",
.id = -1,
.dev = {
.dma_mask = &tusb_dmamask,
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 9b1893f31fc8..450a332f1009 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -70,6 +70,10 @@ struct omap_musb_board_data {
u8 mode;
u16 power;
unsigned extvbus:1;
+ void (*set_phy_power)(u8 on);
+ void (*clear_irq)(void);
+ void (*set_mode)(u8 mode);
+ void (*reset)(void);
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
@@ -80,6 +84,11 @@ extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern int omap4430_phy_power(struct device *dev, int ID, int on);
+extern int omap4430_phy_set_clk(struct device *dev, int on);
+extern int omap4430_phy_init(struct device *dev);
+extern int omap4430_phy_exit(struct device *dev);
+
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index fc767ac76381..52295fff5577 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -83,7 +83,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f714d7be35b9..50533edc3994 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -120,7 +120,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 315eec930604..d06177b5fe22 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -84,7 +84,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 273731279740..35a88a5a5013 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -124,7 +124,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index 9ec575729e2c..130861bd2589 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -91,7 +91,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3e3dfb23f94e..4c2ee6789099 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -520,7 +520,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 9ff166d6f00d..4f03fbc4c9be 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -625,7 +625,7 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = ~(u32)0;
static struct platform_device musb_device = {
- .name = "musb_hdrc",
+ .name = "musb-blackfin",
.id = 0,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 35275ba7096f..12abd5b924b3 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -95,7 +95,8 @@
#define twl_has_rtc() false
#endif
-#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) ||\
+ defined(CONFIG_TWL6030_USB) || defined(CONFIG_TWL6030_USB_MODULE)
#define twl_has_usb() true
#else
#define twl_has_usb() false
@@ -682,6 +683,43 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
usb3v1.dev = child;
}
}
+ if (twl_has_usb() && pdata->usb && twl_class_is_6030()) {
+
+ static struct regulator_consumer_supply usb3v3 = {
+ .supply = "vusb",
+ };
+
+ if (twl_has_regulator()) {
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ child = add_regulator_linked(TWL6030_REG_VUSB,
+ &usb_fixed, &usb3v3, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ child = add_child(0, "twl6030_usb",
+ pdata->usb, sizeof(*pdata->usb),
+ true,
+ /* irq1 = VBUS_PRES, irq0 = USB ID */
+ pdata->irq_base + USBOTG_INTR_OFFSET,
+ pdata->irq_base + USB_PRES_INTR_OFFSET);
+
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ /* we need to connect regulators to this transceiver */
+ if (twl_has_regulator() && child)
+ usb3v3.dev = child;
+
+ }
if (twl_has_watchdog()) {
child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
@@ -815,10 +853,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
if (IS_ERR(child))
return PTR_ERR(child);
- child = add_regulator(TWL6030_REG_VUSB, pdata->vusb);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1);
if (IS_ERR(child))
return PTR_ERR(child);
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index aaedb11d9d2c..06c8955907e9 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -74,7 +74,7 @@ static int twl6030_interrupt_mapping[24] = {
USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
USBOTG_INTR_OFFSET, /* Bit 18 ID */
- USBOTG_INTR_OFFSET, /* Bit 19 VBUS */
+ USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
CHARGER_INTR_OFFSET, /* Bit 21 EXT_CHRG */
CHARGER_INTR_OFFSET, /* Bit 22 INT_CHRG */
@@ -128,6 +128,13 @@ static int twl6030_irq_thread(void *data)
sts.bytes[3] = 0; /* Only 24 bits are valid*/
+ /*
+ * Since VBUS status bit is not reliable for VBUS disconnect
+ * use CHARGER VBUS detection status bit instead.
+ */
+ if (sts.bytes[2] & 0x10)
+ sts.bytes[2] |= 0x08;
+
for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
local_irq_disable();
if (sts.int_sts & 0x1) {
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ad2114e87511..5c2720d64ffa 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -96,7 +96,7 @@
/* Mentor high speed "dual role" controller, in peripheral role */
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name)
+#define gadget_is_musbhdrc(g) !strcmp("musb-hdrc", (g)->name)
#else
#define gadget_is_musbhdrc(g) 0
#endif
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 341a37a469bd..4cbb7e4b368d 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
select TWL4030_USB if MACH_OMAP_3430SDP
+ select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
@@ -30,57 +31,41 @@ config USB_MUSB_HDRC
If you do not know what this is, please say N.
To compile this driver as a module, choose M here; the
- module will be called "musb_hdrc".
+ module will be called "musb-hdrc".
-config USB_MUSB_SOC
- boolean
+choice
+ prompt "Platform Glue Layer"
depends on USB_MUSB_HDRC
- default y if ARCH_DAVINCI
- default y if ARCH_OMAP2430
- default y if ARCH_OMAP3
- default y if ARCH_OMAP4
- default y if (BF54x && !BF544)
- default y if (BF52x && !BF522 && !BF523)
-comment "DaVinci 35x and 644x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+config USB_MUSB_DAVINCI
+ bool "DaVinci"
+ depends on ARCH_DAVINCI_DMx
-comment "DA8xx/OMAP-L1x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+config USB_MUSB_DA8XX
+ bool "DA8xx/OMAP-L1x"
+ depends on ARCH_DAVINCI_DA8XX
-comment "OMAP 243x high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP2430
+config USB_MUSB_TUSB6010
+ bool "TUSB6010"
+ depends on ARCH_OMAP
-comment "OMAP 343x high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP3
+config USB_MUSB_OMAP2PLUS
+ bool "OMAP2430 and onwards"
+ depends on ARCH_OMAP2PLUS
-comment "OMAP 44xx high speed USB support"
- depends on USB_MUSB_HDRC && ARCH_OMAP4
+config USB_MUSB_AM35X
+ bool "AM35x"
+ depends on ARCH_OMAP
-comment "Blackfin high speed USB Support"
- depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_BLACKFIN
+ bool "Blackfin"
+ depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
-config USB_MUSB_AM35X
- bool
- depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
- select NOP_USB_XCEIV
- default MACH_OMAP3517EVM
- help
- Select this option if your platform is based on AM35x. As
- AM35x has an updated MUSB with CPPI4.1 DMA so this config
- is introduced to differentiate musb ip between OMAP3x and
- AM35x platforms.
-
-config USB_TUSB6010
- boolean "TUSB 6010 support"
- depends on USB_MUSB_HDRC && !USB_MUSB_SOC
- select NOP_USB_XCEIV
- default y
- help
- The TUSB 6010 chip, from Texas Instruments, connects a discrete
- HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
- (a high speed serial link). It can use system-specific external
- DMA controllers.
+config USB_MUSB_UX500
+ bool "U8500 and U5500"
+ depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+
+endchoice
choice
prompt "Driver Mode"
@@ -158,7 +143,7 @@ config USB_MUSB_HDRC_HCD
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
depends on USB_MUSB_HDRC
- default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
+ default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
help
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
@@ -171,21 +156,21 @@ config MUSB_PIO_ONLY
config USB_INVENTRA_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
+ default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
help
Enable DMA transfers using Mentor's engine.
config USB_TI_CPPI_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_DAVINCI
+ default USB_MUSB_DAVINCI
help
Enable DMA transfers when TI CPPI DMA is available.
config USB_TUSB_OMAP_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- depends on USB_TUSB6010
+ depends on USB_MUSB_TUSB6010
depends on ARCH_OMAP
default y
help
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index ce164e8998d8..74df5284894f 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -8,22 +8,19 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
musb_hdrc-y := musb_core.o
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx) += davinci.o
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX) += da8xx.o
-musb_hdrc-$(CONFIG_USB_TUSB6010) += tusb6010.o
-musb_hdrc-$(CONFIG_ARCH_OMAP2430) += omap2430.o
-ifeq ($(CONFIG_USB_MUSB_AM35X),y)
- musb_hdrc-$(CONFIG_ARCH_OMAP3430) += am35x.o
-else
- musb_hdrc-$(CONFIG_ARCH_OMAP3430) += omap2430.o
-endif
-musb_hdrc-$(CONFIG_ARCH_OMAP4) += omap2430.o
-musb_hdrc-$(CONFIG_BF54x) += blackfin.o
-musb_hdrc-$(CONFIG_BF52x) += blackfin.o
musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC) += musb_gadget_ep0.o musb_gadget.o
musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD) += musb_virthub.o musb_host.o
musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o
+# Hardware Glue Layer
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
+obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
+obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
+obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
+obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
+obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
+
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
# PIO only, or DMA (several potential schemes).
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index b0aabf3a606f..d5a3da37c90c 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -29,8 +29,9 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include "musb_core.h"
@@ -80,51 +81,18 @@
#define USB_MENTOR_CORE_OFFSET 0x400
-static inline void phy_on(void)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(100);
- u32 devconf2;
-
- /*
- * Start the on-chip PHY and its PLL.
- */
- devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
- devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
- devconf2 |= CONF2_PHY_PLLON;
-
- omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
- DBG(1, "Waiting for PHY clock good...\n");
- while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
- & CONF2_PHYCLKGD)) {
- cpu_relax();
-
- if (time_after(jiffies, timeout)) {
- DBG(1, "musb PHY clock good timed out\n");
- break;
- }
- }
-}
-
-static inline void phy_off(void)
-{
- u32 devconf2;
-
- /*
- * Power down the on-chip PHY.
- */
- devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
- devconf2 &= ~CONF2_PHY_PLLON;
- devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
- omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
+struct am35x_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *phy_clk;
+ struct clk *clk;
+};
+#define glue_to_musb(g) platform_get_drvdata(g->musb)
/*
- * musb_platform_enable - enable interrupts
+ * am35x_musb_enable - enable interrupts
*/
-void musb_platform_enable(struct musb *musb)
+static void am35x_musb_enable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 epmask;
@@ -143,9 +111,9 @@ void musb_platform_enable(struct musb *musb)
}
/*
- * musb_platform_disable - disable HDRC and flush interrupts
+ * am35x_musb_disable - disable HDRC and flush interrupts
*/
-void musb_platform_disable(struct musb *musb)
+static void am35x_musb_disable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
@@ -162,7 +130,7 @@ void musb_platform_disable(struct musb *musb)
#define portstate(stmt)
#endif
-static void am35x_set_vbus(struct musb *musb, int is_on)
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
{
WARN_ON(is_on && is_peripheral_active(musb));
}
@@ -221,7 +189,7 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
{
static unsigned long last_timer;
@@ -251,13 +219,16 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
mod_timer(&otg_workaround, timeout);
}
-static irqreturn_t am35x_interrupt(int irq, void *hci)
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
void __iomem *reg_base = musb->ctrl_base;
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
- u32 epintr, usbintr, lvl_intr;
+ u32 epintr, usbintr;
spin_lock_irqsave(&musb->lock, flags);
@@ -346,9 +317,8 @@ eoi:
/* EOI needs to be written for the IRQ to be re-asserted. */
if (ret == IRQ_HANDLED || epintr || usbintr) {
/* clear level interrupt */
- lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
- omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ if (data->clear_irq)
+ data->clear_irq();
/* write EOI */
musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
}
@@ -362,137 +332,85 @@ eoi:
return ret;
}
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
{
- u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
+ int retval = 0;
- devconf2 &= ~CONF2_OTGMODE;
- switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- case MUSB_HOST: /* Force VBUS valid, ID = 0 */
- devconf2 |= CONF2_FORCE_HOST;
- break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
- devconf2 |= CONF2_FORCE_DEVICE;
- break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
- case MUSB_OTG: /* Don't override the VBUS/ID comparators */
- devconf2 |= CONF2_NO_OVERRIDE;
- break;
-#endif
- default:
- DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
- }
+ if (data->set_mode)
+ data->set_mode(musb_mode);
+ else
+ retval = -EIO;
- omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
- return 0;
+ return retval;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int am35x_musb_init(struct musb *musb)
{
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
void __iomem *reg_base = musb->ctrl_base;
- u32 rev, lvl_intr, sw_reset;
- int status;
+ u32 rev;
musb->mregs += USB_MENTOR_CORE_OFFSET;
- clk_enable(musb->clock);
- DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
-
- musb->phy_clock = clk_get(musb->controller, "fck");
- if (IS_ERR(musb->phy_clock)) {
- status = PTR_ERR(musb->phy_clock);
- goto exit0;
- }
- clk_enable(musb->phy_clock);
- DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
-
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, USB_REVISION_REG);
- if (!rev) {
- status = -ENODEV;
- goto exit1;
- }
+ if (!rev)
+ return -ENODEV;
usb_nop_xceiv_register();
musb->xceiv = otg_get_transceiver();
- if (!musb->xceiv) {
- status = -ENODEV;
- goto exit1;
- }
+ if (!musb->xceiv)
+ return -ENODEV;
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
- musb->board_set_vbus = am35x_set_vbus;
-
- /* Global reset */
- sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
- sw_reset |= AM35XX_USBOTGSS_SW_RST;
- omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
-
- sw_reset &= ~AM35XX_USBOTGSS_SW_RST;
- omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+ /* Reset the musb */
+ if (data->reset)
+ data->reset();
/* Reset the controller */
musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
/* Start the on-chip PHY and its PLL. */
- phy_on();
+ if (data->set_phy_power)
+ data->set_phy_power(1);
msleep(5);
- musb->isr = am35x_interrupt;
+ musb->isr = am35x_musb_interrupt;
/* clear level interrupt */
- lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
- omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ if (data->clear_irq)
+ data->clear_irq();
+
return 0;
-exit1:
- clk_disable(musb->phy_clock);
- clk_put(musb->phy_clock);
-exit0:
- clk_disable(musb->clock);
- return status;
}
-int musb_platform_exit(struct musb *musb)
+static int am35x_musb_exit(struct musb *musb)
{
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
+
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
- phy_off();
+ /* Shutdown the on-chip PHY and its PLL. */
+ if (data->set_phy_power)
+ data->set_phy_power(0);
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
- clk_disable(musb->clock);
-
- clk_disable(musb->phy_clock);
- clk_put(musb->phy_clock);
-
return 0;
}
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
- phy_off();
-}
-
-void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
- phy_on();
-}
-#endif
-
/* AM35x supports only 32bit read operation */
void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
{
@@ -522,3 +440,215 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
memcpy(dst, &val, len);
}
}
+
+static const struct musb_platform_ops am35x_ops = {
+ .init = am35x_musb_init,
+ .exit = am35x_musb_exit,
+
+ .enable = am35x_musb_enable,
+ .disable = am35x_musb_disable,
+
+ .set_mode = am35x_musb_set_mode,
+ .try_idle = am35x_musb_try_idle,
+
+ .set_vbus = am35x_musb_set_vbus,
+};
+
+static u64 am35x_dmamask = DMA_BIT_MASK(32);
+
+static int __init am35x_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct am35x_glue *glue;
+
+ struct clk *phy_clk;
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ phy_clk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(phy_clk)) {
+ dev_err(&pdev->dev, "failed to get PHY clock\n");
+ ret = PTR_ERR(phy_clk);
+ goto err2;
+ }
+
+ clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err3;
+ }
+
+ ret = clk_enable(phy_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable PHY clock\n");
+ goto err4;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err5;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &am35x_dmamask;
+ musb->dev.coherent_dma_mask = am35x_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->phy_clk = phy_clk;
+ glue->clk = clk;
+
+ pdata->platform_ops = &am35x_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err6;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err6;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err6;
+ }
+
+ return 0;
+
+err6:
+ clk_disable(clk);
+
+err5:
+ clk_disable(phy_clk);
+
+err4:
+ clk_put(clk);
+
+err3:
+ clk_put(phy_clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit am35x_remove(struct platform_device *pdev)
+{
+ struct am35x_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_disable(glue->phy_clk);
+ clk_put(glue->clk);
+ clk_put(glue->phy_clk);
+ kfree(glue);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int am35x_suspend(struct device *dev)
+{
+ struct am35x_glue *glue = dev_get_drvdata(dev);
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
+
+ /* Shutdown the on-chip PHY and its PLL. */
+ if (data->set_phy_power)
+ data->set_phy_power(0);
+
+ clk_disable(glue->phy_clk);
+ clk_disable(glue->clk);
+
+ return 0;
+}
+
+static int am35x_resume(struct device *dev)
+{
+ struct am35x_glue *glue = dev_get_drvdata(dev);
+ struct musb_hdrc_platform_data *plat = dev->platform_data;
+ struct omap_musb_board_data *data = plat->board_data;
+ int ret;
+
+ /* Start the on-chip PHY and its PLL. */
+ if (data->set_phy_power)
+ data->set_phy_power(1);
+
+ ret = clk_enable(glue->phy_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable PHY clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(glue->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct dev_pm_ops am35x_pm_ops = {
+ .suspend = am35x_suspend,
+ .resume = am35x_resume,
+};
+
+#define DEV_PM_OPS &am35x_pm_ops
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver am35x_driver = {
+ .remove = __exit_p(am35x_remove),
+ .driver = {
+ .name = "musb-am35x",
+ .pm = DEV_PM_OPS,
+ },
+};
+
+MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init am35x_init(void)
+{
+ return platform_driver_probe(&am35x_driver, am35x_probe);
+}
+subsys_initcall(am35x_init);
+
+static void __exit am35x_exit(void)
+{
+ platform_driver_unregister(&am35x_driver);
+}
+module_exit(am35x_exit);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index e8cbcc59c419..e72f762d214d 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -15,12 +15,20 @@
#include <linux/list.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/cacheflush.h>
#include "musb_core.h"
#include "blackfin.h"
+struct bfin_glue {
+ struct device *dev;
+ struct platform_device *musb;
+};
+#define glue_to_musb(g) platform_get_drvdata(g->musb)
+
/*
* Load an endpoint's FIFO
*/
@@ -277,7 +285,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
DBG(4, "state is %s\n", otg_state_string(musb));
}
-void musb_platform_enable(struct musb *musb)
+static void bfin_musb_enable(struct musb *musb)
{
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
@@ -285,11 +293,11 @@ void musb_platform_enable(struct musb *musb)
}
}
-void musb_platform_disable(struct musb *musb)
+static void bfin_musb_disable(struct musb *musb)
{
}
-static void bfin_set_vbus(struct musb *musb, int is_on)
+static void bfin_musb_set_vbus(struct musb *musb, int is_on)
{
int value = musb->config->gpio_vrsel_active;
if (!is_on)
@@ -302,51 +310,29 @@ static void bfin_set_vbus(struct musb *musb, int is_on)
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct otg_transceiver *x, unsigned mA)
{
return 0;
}
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout)
{
if (!is_otg_enabled(musb) && is_host_enabled(musb))
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
}
-int musb_platform_get_vbus_status(struct musb *musb)
+static int bfin_musb_get_vbus_status(struct musb *musb)
{
return 0;
}
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
{
return -EIO;
}
-int __init musb_platform_init(struct musb *musb)
+static void bfin_musb_reg_init(struct musb *musb)
{
-
- /*
- * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
- * and OTG HOST modes, while rev 1.1 and greater require PE7 to
- * be low for DEVICE mode and high for HOST mode. We set it high
- * here because we are in host mode
- */
-
- if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
- printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
- musb->config->gpio_vrsel);
- return -ENODEV;
- }
- gpio_direction_output(musb->config->gpio_vrsel, 0);
-
- usb_nop_xceiv_register();
- musb->xceiv = otg_get_transceiver();
- if (!musb->xceiv) {
- gpio_free(musb->config->gpio_vrsel);
- return -ENODEV;
- }
-
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
@@ -380,21 +366,47 @@ int __init musb_platform_init(struct musb *musb)
EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
SSYNC();
+}
+
+static int bfin_musb_init(struct musb *musb)
+{
+
+ /*
+ * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+ * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+ * be low for DEVICE mode and high for HOST mode. We set it high
+ * here because we are in host mode
+ */
+
+ if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+ printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+ musb->config->gpio_vrsel);
+ return -ENODEV;
+ }
+ gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ gpio_free(musb->config->gpio_vrsel);
+ return -ENODEV;
+ }
+
+ bfin_musb_reg_init(musb);
if (is_host_enabled(musb)) {
- musb->board_set_vbus = bfin_set_vbus;
setup_timer(&musb_conn_timer,
musb_conn_timer_handler, (unsigned long) musb);
}
if (is_peripheral_enabled(musb))
- musb->xceiv->set_power = bfin_set_power;
+ musb->xceiv->set_power = bfin_musb_set_power;
musb->isr = blackfin_interrupt;
return 0;
}
-int musb_platform_exit(struct musb *musb)
+static int bfin_musb_exit(struct musb *musb)
{
gpio_free(musb->config->gpio_vrsel);
@@ -402,3 +414,154 @@ int musb_platform_exit(struct musb *musb)
usb_nop_xceiv_unregister();
return 0;
}
+
+static const struct musb_platform_ops bfin_ops = {
+ .init = bfin_musb_init,
+ .exit = bfin_musb_exit,
+
+ .enable = bfin_musb_enable,
+ .disable = bfin_musb_disable,
+
+ .set_mode = bfin_musb_set_mode,
+ .try_idle = bfin_musb_try_idle,
+
+ .vbus_status = bfin_musb_vbus_status,
+ .set_vbus = bfin_musb_set_vbus,
+};
+
+static u64 bfin_dmamask = DMA_BIT_MASK(32);
+
+static int __init bfin_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct bfin_glue *glue;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &bfin_dmamask;
+ musb->dev.coherent_dma_mask = bfin_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+
+ pdata->platform_ops = &bfin_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err2;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err2;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit bfin_remove(struct platform_device *pdev)
+{
+ struct bfin_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ kfree(glue);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_suspend(struct device *dev)
+{
+ struct bfin_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+
+ if (is_host_active(musb))
+ /*
+ * During hibernate gpio_vrsel will change from high to low
+ * low which will generate wakeup event resume the system
+ * immediately. Set it to 0 before hibernate to avoid this
+ * wakeup event.
+ */
+ gpio_set_value(musb->config->gpio_vrsel, 0);
+
+ return 0;
+}
+
+static int bfin_resume(struct device *dev)
+{
+ struct bfin_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+
+ bfin_musb_reg_init(musb);
+
+ return 0;
+}
+
+static struct dev_pm_ops bfin_pm_ops = {
+ .suspend = bfin_suspend,
+ .resume = bfin_resume,
+};
+
+#define DEV_PM_OPS &bfin_pm_op,
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver bfin_driver = {
+ .remove = __exit_p(bfin_remove),
+ .driver = {
+ .name = "musb-bfin",
+ .pm = DEV_PM_OPS,
+ },
+};
+
+MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
+MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
+MODULE_LICENSE("GPL v2");
+
+static int __init bfin_init(void)
+{
+ return platform_driver_probe(&bfin_driver, bfin_probe);
+}
+subsys_initcall(bfin_init);
+
+static void __exit bfin_exit(void)
+{
+ platform_driver_unregister(&bfin_driver);
+}
+module_exit(bfin_exit);
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 84427bebbf62..69a0da3c8f09 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/da8xx.h>
#include <mach/usb.h>
@@ -78,6 +80,12 @@
#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
+struct da8xx_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
/*
* REVISIT (PM): we should be able to keep the PHY in low power mode most
* of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
@@ -131,9 +139,9 @@ static inline void phy_off(void)
*/
/**
- * musb_platform_enable - enable interrupts
+ * da8xx_musb_enable - enable interrupts
*/
-void musb_platform_enable(struct musb *musb)
+static void da8xx_musb_enable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 mask;
@@ -151,9 +159,9 @@ void musb_platform_enable(struct musb *musb)
}
/**
- * musb_platform_disable - disable HDRC and flush interrupts
+ * da8xx_musb_disable - disable HDRC and flush interrupts
*/
-void musb_platform_disable(struct musb *musb)
+static void da8xx_musb_disable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
@@ -170,7 +178,7 @@ void musb_platform_disable(struct musb *musb)
#define portstate(stmt)
#endif
-static void da8xx_set_vbus(struct musb *musb, int is_on)
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
{
WARN_ON(is_on && is_peripheral_active(musb));
}
@@ -252,7 +260,7 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
{
static unsigned long last_timer;
@@ -282,7 +290,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
mod_timer(&otg_workaround, timeout);
}
-static irqreturn_t da8xx_interrupt(int irq, void *hci)
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
void __iomem *reg_base = musb->ctrl_base;
@@ -380,7 +388,7 @@ static irqreturn_t da8xx_interrupt(int irq, void *hci)
return ret;
}
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
{
u32 cfgchip2 = __raw_readl(CFGCHIP2);
@@ -409,15 +417,13 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return 0;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int da8xx_musb_init(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 rev;
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
- clk_enable(musb->clock);
-
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
if (!rev)
@@ -431,8 +437,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
- musb->board_set_vbus = da8xx_set_vbus;
-
/* Reset the controller */
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
@@ -446,14 +450,13 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
rev, __raw_readl(CFGCHIP2),
musb_readb(reg_base, DA8XX_USB_CTRL_REG));
- musb->isr = da8xx_interrupt;
+ musb->isr = da8xx_musb_interrupt;
return 0;
fail:
- clk_disable(musb->clock);
return -ENODEV;
}
-int musb_platform_exit(struct musb *musb)
+static int da8xx_musb_exit(struct musb *musb)
{
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
@@ -463,7 +466,140 @@ int musb_platform_exit(struct musb *musb)
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
- clk_disable(musb->clock);
+ return 0;
+}
+
+static const struct musb_platform_ops da8xx_ops = {
+ .init = da8xx_musb_init,
+ .exit = da8xx_musb_exit,
+
+ .enable = da8xx_musb_enable,
+ .disable = da8xx_musb_disable,
+
+ .set_mode = da8xx_musb_set_mode,
+ .try_idle = da8xx_musb_try_idle,
+
+ .set_vbus = da8xx_musb_set_vbus,
+};
+
+static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+
+static int __init da8xx_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct da8xx_glue *glue;
+
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ clk = clk_get(&pdev->dev, "usb20");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &da8xx_dmamask;
+ musb->dev.coherent_dma_mask = da8xx_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &da8xx_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
+
+ return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit da8xx_remove(struct platform_device *pdev)
+{
+ struct da8xx_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
return 0;
}
+
+static struct platform_driver da8xx_driver = {
+ .remove = __exit_p(da8xx_remove),
+ .driver = {
+ .name = "musb-da8xx",
+ },
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init da8xx_init(void)
+{
+ return platform_driver_probe(&da8xx_driver, da8xx_probe);
+}
+subsys_initcall(da8xx_init);
+
+static void __exit da8xx_exit(void)
+{
+ platform_driver_unregister(&da8xx_driver);
+}
+module_exit(da8xx_exit);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 051e2bf1897a..e6de097fb7e8 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -30,6 +30,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/memory.h>
@@ -51,6 +53,12 @@
#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR)
#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
+struct davinci_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
/* REVISIT (PM) we should be able to keep the PHY in low power mode most
* of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
* and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -83,7 +91,7 @@ static inline void phy_off(void)
static int dma_off = 1;
-void musb_platform_enable(struct musb *musb)
+static void davinci_musb_enable(struct musb *musb)
{
u32 tmp, old, val;
@@ -116,7 +124,7 @@ void musb_platform_enable(struct musb *musb)
/*
* Disable the HDRC and flush interrupts
*/
-void musb_platform_disable(struct musb *musb)
+static void davinci_musb_disable(struct musb *musb)
{
/* because we don't set CTRLR.UINT, "important" to:
* - not read/write INTRUSB/INTRUSBE
@@ -167,7 +175,7 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
#endif /* EVM */
-static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
{
#ifdef CONFIG_MACH_DAVINCI_EVM
if (is_on)
@@ -190,10 +198,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
#endif
}
-static void davinci_set_vbus(struct musb *musb, int is_on)
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
{
WARN_ON(is_on && is_peripheral_active(musb));
- davinci_source_power(musb, is_on, 0);
+ davinci_musb_source_power(musb, is_on, 0);
}
@@ -259,7 +267,7 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
-static irqreturn_t davinci_interrupt(int irq, void *__hci)
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
irqreturn_t retval = IRQ_NONE;
@@ -345,7 +353,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* NOTE: this must complete poweron within 100 msec
* (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
*/
- davinci_source_power(musb, drvvbus, 0);
+ davinci_musb_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
otg_state_string(musb),
@@ -370,13 +378,13 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
return retval;
}
-int musb_platform_set_mode(struct musb *musb, u8 mode)
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
{
/* EVM can't do this (right?) */
return -EIO;
}
-int __init musb_platform_init(struct musb *musb)
+static int davinci_musb_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
@@ -388,8 +396,6 @@ int __init musb_platform_init(struct musb *musb)
musb->mregs += DAVINCI_BASE_OFFSET;
- clk_enable(musb->clock);
-
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
@@ -398,8 +404,7 @@ int __init musb_platform_init(struct musb *musb)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
- musb->board_set_vbus = davinci_set_vbus;
- davinci_source_power(musb, 0, 1);
+ davinci_musb_source_power(musb, 0, 1);
/* dm355 EVM swaps D+/D- for signal integrity, and
* is clocked from the main 24 MHz crystal.
@@ -440,18 +445,16 @@ int __init musb_platform_init(struct musb *musb)
revision, __raw_readl(USB_PHY_CTRL),
musb_readb(tibase, DAVINCI_USB_CTRL_REG));
- musb->isr = davinci_interrupt;
+ musb->isr = davinci_musb_interrupt;
return 0;
fail:
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
}
-int musb_platform_exit(struct musb *musb)
+static int davinci_musb_exit(struct musb *musb)
{
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
@@ -465,7 +468,7 @@ int musb_platform_exit(struct musb *musb)
__raw_writel(deepsleep, DM355_DEEPSLEEP);
}
- davinci_source_power(musb, 0 /*off*/, 1);
+ davinci_musb_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
if (is_host_enabled(musb) && musb->xceiv->default_a) {
@@ -495,10 +498,141 @@ int musb_platform_exit(struct musb *musb)
phy_off();
- clk_disable(musb->clock);
-
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
+
+static const struct musb_platform_ops davinci_ops = {
+ .init = davinci_musb_init,
+ .exit = davinci_musb_exit,
+
+ .enable = davinci_musb_enable,
+ .disable = davinci_musb_disable,
+
+ .set_mode = davinci_musb_set_mode,
+
+ .set_vbus = davinci_musb_set_vbus,
+};
+
+static u64 davinci_dmamask = DMA_BIT_MASK(32);
+
+static int __init davinci_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct davinci_glue *glue;
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &davinci_dmamask;
+ musb->dev.coherent_dma_mask = davinci_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &davinci_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
+
+ return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit davinci_remove(struct platform_device *pdev)
+{
+ struct davinci_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
+
+ return 0;
+}
+
+static struct platform_driver davinci_driver = {
+ .remove = __exit_p(davinci_remove),
+ .driver = {
+ .name = "musb-davinci",
+ },
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init davinci_init(void)
+{
+ return platform_driver_probe(&davinci_driver, davinci_probe);
+}
+subsys_initcall(davinci_init);
+
+static void __exit davinci_exit(void)
+{
+ platform_driver_unregister(&davinci_driver);
+}
+module_exit(davinci_exit);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index a5ceddfe57d6..7816c0180430 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,19 +99,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#ifdef CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
#include "musb_core.h"
-
-#ifdef CONFIG_ARCH_DAVINCI
-#include "davinci.h"
-#endif
-
#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
@@ -126,7 +115,7 @@ MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
-#define MUSB_DRIVER_NAME "musb_hdrc"
+#define MUSB_DRIVER_NAME "musb-hdrc"
const char musb_driver_name[] = MUSB_DRIVER_NAME;
MODULE_DESCRIPTION(DRIVER_INFO);
@@ -230,7 +219,7 @@ static struct otg_io_access_ops musb_ulpi_access = {
/*-------------------------------------------------------------------------*/
-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
/*
* Load an endpoint's FIFO
@@ -390,7 +379,7 @@ void musb_otg_timer_func(unsigned long data)
case OTG_STATE_A_SUSPEND:
case OTG_STATE_A_WAIT_BCON:
DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
- musb_set_vbus(musb, 0);
+ musb_platform_set_vbus(musb, 0);
musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
default:
@@ -570,7 +559,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb->ep0_stage = MUSB_EP0_START;
musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
- musb_set_vbus(musb, 1);
+ musb_platform_set_vbus(musb, 1);
handled = IRQ_HANDLED;
}
@@ -641,7 +630,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
/* go through A_WAIT_VFALL then start a new session */
if (!ignore)
- musb_set_vbus(musb, 0);
+ musb_platform_set_vbus(musb, 0);
handled = IRQ_HANDLED;
}
@@ -1048,8 +1037,6 @@ static void musb_shutdown(struct platform_device *pdev)
spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
musb_generic_disable(musb);
- if (musb->clock)
- clk_put(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
/* FIXME power down */
@@ -1068,10 +1055,11 @@ static void musb_shutdown(struct platform_device *pdev)
* We don't currently use dynamic fifo setup capability to do anything
* more than selecting one of a bunch of predefined configurations.
*/
-#if defined(CONFIG_USB_TUSB6010) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
- || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
+ || defined(CONFIG_USB_MUSB_AM35X)
static ushort __initdata fifo_mode = 4;
+#elif defined(CONFIG_USB_MUSB_UX500)
+static ushort __initdata fifo_mode = 5;
#else
static ushort __initdata fifo_mode = 2;
#endif
@@ -1495,7 +1483,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
struct musb_hw_ep *hw_ep = musb->endpoints + i;
hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
hw_ep->fifo_sync_va =
@@ -1542,7 +1530,8 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
- defined(CONFIG_ARCH_OMAP4)
+ defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
+ defined(CONFIG_ARCH_U5500)
static irqreturn_t generic_interrupt(int irq, void *__hci)
{
@@ -1898,6 +1887,7 @@ allocate_instance(struct device *dev,
}
musb->controller = dev;
+
return musb;
}
@@ -1994,30 +1984,14 @@ bad_config:
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
musb->board_set_power = plat->set_power;
- musb->set_clock = plat->set_clock;
musb->min_power = plat->min_power;
-
- /* Clock usage is chip-specific ... functional clock (DaVinci,
- * OMAP2430), or PHY ref (some TUSB6010 boards). All this core
- * code does is make sure a clock handle is available; platform
- * code manages it during start/stop and suspend/resume.
- */
- if (plat->clock) {
- musb->clock = clk_get(dev, plat->clock);
- if (IS_ERR(musb->clock)) {
- status = PTR_ERR(musb->clock);
- musb->clock = NULL;
- goto fail1;
- }
- }
+ musb->ops = plat->platform_ops;
/* The musb_platform_init() call:
* - adjusts musb->mregs and musb->isr if needed,
* - may initialize an integrated tranceiver
* - initializes musb->xceiv, usually by otg_get_transceiver()
- * - activates clocks.
* - stops powering VBUS
- * - assigns musb->board_set_vbus if host mode is enabled
*
* There are various transciever configurations. Blackfin,
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
@@ -2027,7 +2001,7 @@ bad_config:
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
if (status < 0)
- goto fail2;
+ goto fail1;
if (!musb->isr) {
status = -ENODEV;
@@ -2177,10 +2151,6 @@ fail3:
device_init_wakeup(dev, 0);
musb_platform_exit(musb);
-fail2:
- if (musb->clock)
- clk_put(musb->clock);
-
fail1:
dev_err(musb->controller,
"musb_init_controller failed with status %d\n", status);
@@ -2263,144 +2233,138 @@ static int __exit musb_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
-static struct musb_context_registers musb_context;
-
-void musb_save_context(struct musb *musb)
+static void musb_save_context(struct musb *musb)
{
int i;
void __iomem *musb_base = musb->mregs;
void __iomem *epio;
if (is_host_enabled(musb)) {
- musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
- musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
- musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
+ musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
+ musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+ musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
}
- musb_context.power = musb_readb(musb_base, MUSB_POWER);
- musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
- musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
- musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
- musb_context.index = musb_readb(musb_base, MUSB_INDEX);
- musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+ musb->context.power = musb_readb(musb_base, MUSB_POWER);
+ musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
+ musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
+ musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+ musb->context.index = musb_readb(musb_base, MUSB_INDEX);
+ musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
for (i = 0; i < musb->config->num_eps; ++i) {
epio = musb->endpoints[i].regs;
- musb_context.index_regs[i].txmaxp =
+ musb->context.index_regs[i].txmaxp =
musb_readw(epio, MUSB_TXMAXP);
- musb_context.index_regs[i].txcsr =
+ musb->context.index_regs[i].txcsr =
musb_readw(epio, MUSB_TXCSR);
- musb_context.index_regs[i].rxmaxp =
+ musb->context.index_regs[i].rxmaxp =
musb_readw(epio, MUSB_RXMAXP);
- musb_context.index_regs[i].rxcsr =
+ musb->context.index_regs[i].rxcsr =
musb_readw(epio, MUSB_RXCSR);
if (musb->dyn_fifo) {
- musb_context.index_regs[i].txfifoadd =
+ musb->context.index_regs[i].txfifoadd =
musb_read_txfifoadd(musb_base);
- musb_context.index_regs[i].rxfifoadd =
+ musb->context.index_regs[i].rxfifoadd =
musb_read_rxfifoadd(musb_base);
- musb_context.index_regs[i].txfifosz =
+ musb->context.index_regs[i].txfifosz =
musb_read_txfifosz(musb_base);
- musb_context.index_regs[i].rxfifosz =
+ musb->context.index_regs[i].rxfifosz =
musb_read_rxfifosz(musb_base);
}
if (is_host_enabled(musb)) {
- musb_context.index_regs[i].txtype =
+ musb->context.index_regs[i].txtype =
musb_readb(epio, MUSB_TXTYPE);
- musb_context.index_regs[i].txinterval =
+ musb->context.index_regs[i].txinterval =
musb_readb(epio, MUSB_TXINTERVAL);
- musb_context.index_regs[i].rxtype =
+ musb->context.index_regs[i].rxtype =
musb_readb(epio, MUSB_RXTYPE);
- musb_context.index_regs[i].rxinterval =
+ musb->context.index_regs[i].rxinterval =
musb_readb(epio, MUSB_RXINTERVAL);
- musb_context.index_regs[i].txfunaddr =
+ musb->context.index_regs[i].txfunaddr =
musb_read_txfunaddr(musb_base, i);
- musb_context.index_regs[i].txhubaddr =
+ musb->context.index_regs[i].txhubaddr =
musb_read_txhubaddr(musb_base, i);
- musb_context.index_regs[i].txhubport =
+ musb->context.index_regs[i].txhubport =
musb_read_txhubport(musb_base, i);
- musb_context.index_regs[i].rxfunaddr =
+ musb->context.index_regs[i].rxfunaddr =
musb_read_rxfunaddr(musb_base, i);
- musb_context.index_regs[i].rxhubaddr =
+ musb->context.index_regs[i].rxhubaddr =
musb_read_rxhubaddr(musb_base, i);
- musb_context.index_regs[i].rxhubport =
+ musb->context.index_regs[i].rxhubport =
musb_read_rxhubport(musb_base, i);
}
}
-
- musb_platform_save_context(musb, &musb_context);
}
-void musb_restore_context(struct musb *musb)
+static void musb_restore_context(struct musb *musb)
{
int i;
void __iomem *musb_base = musb->mregs;
void __iomem *ep_target_regs;
void __iomem *epio;
- musb_platform_restore_context(musb, &musb_context);
-
if (is_host_enabled(musb)) {
- musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
- musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
- musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl);
+ musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
+ musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
+ musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
}
- musb_writeb(musb_base, MUSB_POWER, musb_context.power);
- musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
- musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe);
- musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe);
- musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl);
+ musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+ musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
+ musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+ musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
+ musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
for (i = 0; i < musb->config->num_eps; ++i) {
epio = musb->endpoints[i].regs;
musb_writew(epio, MUSB_TXMAXP,
- musb_context.index_regs[i].txmaxp);
+ musb->context.index_regs[i].txmaxp);
musb_writew(epio, MUSB_TXCSR,
- musb_context.index_regs[i].txcsr);
+ musb->context.index_regs[i].txcsr);
musb_writew(epio, MUSB_RXMAXP,
- musb_context.index_regs[i].rxmaxp);
+ musb->context.index_regs[i].rxmaxp);
musb_writew(epio, MUSB_RXCSR,
- musb_context.index_regs[i].rxcsr);
+ musb->context.index_regs[i].rxcsr);
if (musb->dyn_fifo) {
musb_write_txfifosz(musb_base,
- musb_context.index_regs[i].txfifosz);
+ musb->context.index_regs[i].txfifosz);
musb_write_rxfifosz(musb_base,
- musb_context.index_regs[i].rxfifosz);
+ musb->context.index_regs[i].rxfifosz);
musb_write_txfifoadd(musb_base,
- musb_context.index_regs[i].txfifoadd);
+ musb->context.index_regs[i].txfifoadd);
musb_write_rxfifoadd(musb_base,
- musb_context.index_regs[i].rxfifoadd);
+ musb->context.index_regs[i].rxfifoadd);
}
if (is_host_enabled(musb)) {
musb_writeb(epio, MUSB_TXTYPE,
- musb_context.index_regs[i].txtype);
+ musb->context.index_regs[i].txtype);
musb_writeb(epio, MUSB_TXINTERVAL,
- musb_context.index_regs[i].txinterval);
+ musb->context.index_regs[i].txinterval);
musb_writeb(epio, MUSB_RXTYPE,
- musb_context.index_regs[i].rxtype);
+ musb->context.index_regs[i].rxtype);
musb_writeb(epio, MUSB_RXINTERVAL,
- musb_context.index_regs[i].rxinterval);
+ musb->context.index_regs[i].rxinterval);
musb_write_txfunaddr(musb_base, i,
- musb_context.index_regs[i].txfunaddr);
+ musb->context.index_regs[i].txfunaddr);
musb_write_txhubaddr(musb_base, i,
- musb_context.index_regs[i].txhubaddr);
+ musb->context.index_regs[i].txhubaddr);
musb_write_txhubport(musb_base, i,
- musb_context.index_regs[i].txhubport);
+ musb->context.index_regs[i].txhubport);
ep_target_regs =
musb_read_target_reg_base(i, musb_base);
musb_write_rxfunaddr(ep_target_regs,
- musb_context.index_regs[i].rxfunaddr);
+ musb->context.index_regs[i].rxfunaddr);
musb_write_rxhubaddr(ep_target_regs,
- musb_context.index_regs[i].rxhubaddr);
+ musb->context.index_regs[i].rxhubaddr);
musb_write_rxhubport(ep_target_regs,
- musb_context.index_regs[i].rxhubport);
+ musb->context.index_regs[i].rxhubport);
}
}
}
@@ -2411,9 +2375,6 @@ static int musb_suspend(struct device *dev)
unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
spin_lock_irqsave(&musb->lock, flags);
if (is_peripheral_active(musb)) {
@@ -2428,10 +2389,6 @@ static int musb_suspend(struct device *dev)
musb_save_context(musb);
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
@@ -2441,14 +2398,6 @@ static int musb_resume_noirq(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct musb *musb = dev_to_musb(&pdev->dev);
- if (!musb->clock)
- return 0;
-
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
-
musb_restore_context(musb);
/* for static cmos like DaVinci, register values were preserved
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 6ad72f395e28..d0c236f8e191 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -222,7 +222,7 @@ enum musb_g_ep0_state {
#endif
/* TUSB mapping: "flat" plus ep0 special cases */
-#if defined(CONFIG_USB_TUSB6010)
+#if defined(CONFIG_USB_MUSB_TUSB6010)
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
@@ -253,6 +253,29 @@ enum musb_g_ep0_state {
/******************************** TYPES *************************************/
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init: turns on clocks, sets up platform-specific registers, etc
+ * @exit: undoes @init
+ * @set_mode: forcefully changes operating mode
+ * @try_ilde: tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus: forces vbus status
+ */
+struct musb_platform_ops {
+ int (*init)(struct musb *musb);
+ int (*exit)(struct musb *musb);
+
+ void (*enable)(struct musb *musb);
+ void (*disable)(struct musb *musb);
+
+ int (*set_mode)(struct musb *musb, u8 mode);
+ void (*try_idle)(struct musb *musb, unsigned long timeout);
+
+ int (*vbus_status)(struct musb *musb);
+ void (*set_vbus)(struct musb *musb, int on);
+};
+
/*
* struct musb_hw_ep - endpoint hardware (bidirectional)
*
@@ -263,7 +286,7 @@ struct musb_hw_ep {
void __iomem *fifo;
void __iomem *regs;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
void __iomem *conf;
#endif
@@ -280,7 +303,7 @@ struct musb_hw_ep {
struct dma_channel *tx_channel;
struct dma_channel *rx_channel;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
/* TUSB has "asynchronous" and "synchronous" dma modes */
dma_addr_t fifo_async;
dma_addr_t fifo_sync;
@@ -323,14 +346,43 @@ static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
#endif
}
+struct musb_csr_regs {
+ /* FIFO registers */
+ u16 txmaxp, txcsr, rxmaxp, rxcsr;
+ u16 rxfifoadd, txfifoadd;
+ u8 txtype, txinterval, rxtype, rxinterval;
+ u8 rxfifosz, txfifosz;
+ u8 txfunaddr, txhubaddr, txhubport;
+ u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+ u32 otg_sysconfig, otg_forcestandby;
+#endif
+ u8 power;
+ u16 intrtxe, intrrxe;
+ u8 intrusbe;
+ u16 frame;
+ u8 index, testmode;
+
+ u8 devctl, busctl, misc;
+
+ struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
/*
* struct musb - Driver instance data.
*/
struct musb {
/* device lock */
spinlock_t lock;
- struct clk *clock;
- struct clk *phy_clock;
+
+ const struct musb_platform_ops *ops;
+ struct musb_context_registers context;
+
irqreturn_t (*isr)(int, void *);
struct work_struct irq_work;
u16 hwvers;
@@ -359,11 +411,7 @@ struct musb {
struct timer_list otg_timer;
#endif
-
- /* called with IRQs blocked; ON/nonzero implies starting a session,
- * and waiting at least a_wait_vrise_tmout.
- */
- void (*board_set_vbus)(struct musb *, int is_on);
+ struct notifier_block nb;
struct dma_controller *dma_controller;
@@ -371,7 +419,7 @@ struct musb {
void __iomem *ctrl_base;
void __iomem *mregs;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
dma_addr_t async;
dma_addr_t sync;
void __iomem *sync_va;
@@ -398,8 +446,6 @@ struct musb {
u8 board_mode; /* enum musb_mode */
int (*board_set_power)(int state);
- int (*set_clock)(struct clk *clk, int is_active);
-
u8 min_power; /* vbus for periph, in mA/2 */
bool is_host;
@@ -458,52 +504,6 @@ struct musb {
#endif
};
-#ifdef CONFIG_PM
-struct musb_csr_regs {
- /* FIFO registers */
- u16 txmaxp, txcsr, rxmaxp, rxcsr;
- u16 rxfifoadd, txfifoadd;
- u8 txtype, txinterval, rxtype, rxinterval;
- u8 rxfifosz, txfifosz;
- u8 txfunaddr, txhubaddr, txhubport;
- u8 rxfunaddr, rxhubaddr, rxhubport;
-};
-
-struct musb_context_registers {
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
- u32 otg_sysconfig, otg_forcestandby;
-#endif
- u8 power;
- u16 intrtxe, intrrxe;
- u8 intrusbe;
- u16 frame;
- u8 index, testmode;
-
- u8 devctl, busctl, misc;
-
- struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
-};
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context);
-extern void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context);
-#else
-#define musb_platform_save_context(m, x) do {} while (0)
-#define musb_platform_restore_context(m, x) do {} while (0)
-#endif
-
-#endif
-
-static inline void musb_set_vbus(struct musb *musb, int is_on)
-{
- musb->board_set_vbus(musb, is_on);
-}
-
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
static inline struct musb *gadget_to_musb(struct usb_gadget *g)
{
@@ -592,29 +592,63 @@ extern void musb_load_testpacket(struct musb *);
extern irqreturn_t musb_interrupt(struct musb *);
-extern void musb_platform_enable(struct musb *musb);
-extern void musb_platform_disable(struct musb *musb);
-
extern void musb_hnp_stop(struct musb *musb);
-extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+ if (musb->ops->set_vbus)
+ musb->ops->set_vbus(musb, is_on);
+}
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
- defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
-#else
-#define musb_platform_try_idle(x, y) do {} while (0)
-#endif
+static inline void musb_platform_enable(struct musb *musb)
+{
+ if (musb->ops->enable)
+ musb->ops->enable(musb);
+}
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
-extern int musb_platform_get_vbus_status(struct musb *musb);
-#else
-#define musb_platform_get_vbus_status(x) 0
-#endif
+static inline void musb_platform_disable(struct musb *musb)
+{
+ if (musb->ops->disable)
+ musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+ if (!musb->ops->set_mode)
+ return 0;
+
+ return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+ unsigned long timeout)
+{
+ if (musb->ops->try_idle)
+ musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+ if (!musb->ops->vbus_status)
+ return 0;
-extern int __init musb_platform_init(struct musb *musb);
-extern int musb_platform_exit(struct musb *musb);
+ return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+ if (!musb->ops->init)
+ return -EINVAL;
+
+ return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+ if (!musb->ops->exit)
+ return -EINVAL;
+
+ return musb->ops->exit(musb);
+}
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index b06e9ef00cfc..03c6ccdbb3be 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -74,7 +74,7 @@ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
{ __raw_writel(data, addr + offset); }
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
/*
* TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
@@ -114,7 +114,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
{ __raw_writeb(data, addr + offset); }
-#endif /* CONFIG_USB_TUSB6010 */
+#endif /* CONFIG_USB_MUSB_TUSB6010 */
#else
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 244267527a60..9cb5fe044438 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -234,7 +234,7 @@
#define MUSB_TESTMODE 0x0F /* 8 bit */
/* Get offset for a given FIFO from musb->mregs */
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
#else
#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
@@ -295,7 +295,7 @@
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(0x100 + (0x10*(_epnum)) + (_offset))
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
/* TUSB6010 EP0 configuration register is special */
#define MUSB_TUSB_OFFSET(_epnum, _offset) \
(0x10 + _offset)
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 43233c397b6e..b46d1877e28e 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -276,7 +276,7 @@ int musb_hub_control(
break;
case USB_PORT_FEAT_POWER:
if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
- musb_set_vbus(musb, 0);
+ musb_platform_set_vbus(musb, 0);
break;
case USB_PORT_FEAT_C_CONNECTION:
case USB_PORT_FEAT_C_ENABLE:
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 27dabcf0a868..a3f12333fc41 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -31,10 +31,18 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include "musb_core.h"
#include "omap2430.h"
+struct omap2430_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+#define glue_to_musb(g) platform_get_drvdata(g->musb)
static struct timer_list musb_idle_timer;
@@ -49,12 +57,8 @@ static void musb_do_idle(unsigned long _musb)
spin_lock_irqsave(&musb->lock, flags);
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
- devctl &= ~MUSB_DEVCTL_SESSION;
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
@@ -98,7 +102,7 @@ static void musb_do_idle(unsigned long _musb)
}
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
{
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
static unsigned long last_timer;
@@ -131,15 +135,11 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
mod_timer(&musb_idle_timer, timeout);
}
-void musb_platform_enable(struct musb *musb)
-{
-}
-void musb_platform_disable(struct musb *musb)
-{
-}
-static void omap_set_vbus(struct musb *musb, int is_on)
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
{
u8 devctl;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ int ret = 1;
/* HDRC controls CPEN, but beware current surges during device
* connect. They can trigger transient overcurrent conditions
* that must be ignored.
@@ -148,12 +148,35 @@ static void omap_set_vbus(struct musb *musb, int is_on)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- musb->is_active = 1;
- musb->xceiv->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
- devctl |= MUSB_DEVCTL_SESSION;
-
- MUSB_HST_MODE(musb);
+ if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+ /* start the session */
+ devctl |= MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ /*
+ * Wait for the musb to set as A device to enable the
+ * VBUS
+ */
+ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(musb->controller,
+ "configured as A device timeout");
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ if (ret && musb->xceiv->set_vbus)
+ otg_set_vbus(musb->xceiv, 1);
+ } else {
+ musb->is_active = 1;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+ MUSB_HST_MODE(musb);
+ }
} else {
musb->is_active = 0;
@@ -175,9 +198,7 @@ static void omap_set_vbus(struct musb *musb, int is_on)
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int musb_platform_resume(struct musb *musb);
-
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
{
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -187,9 +208,91 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return 0;
}
-int __init musb_platform_init(struct musb *musb)
+static inline void omap2430_low_level_exit(struct musb *musb)
+{
+ u32 l;
+
+ /* in any role */
+ l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+ l |= ENABLEFORCE; /* enable MSTANDBY */
+ musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+
+ l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+ l |= ENABLEWAKEUP; /* enable wakeup */
+ musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
{
u32 l;
+
+ l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+ l &= ~ENABLEWAKEUP; /* disable wakeup */
+ musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+
+ l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+ l &= ~ENABLEFORCE; /* disable MSTANDBY */
+ musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+/* blocking notifier support */
+static int musb_otg_notifications(struct notifier_block *nb,
+ unsigned long event, void *unused)
+{
+ struct musb *musb = container_of(nb, struct musb, nb);
+ struct device *dev = musb->controller;
+ struct musb_hdrc_platform_data *pdata = dev->platform_data;
+ struct omap_musb_board_data *data = pdata->board_data;
+
+ switch (event) {
+ case USB_EVENT_ID:
+ DBG(4, "ID GND\n");
+
+ if (is_otg_enabled(musb)) {
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ if (musb->gadget_driver) {
+ otg_init(musb->xceiv);
+
+ if (data->interface_type ==
+ MUSB_INTERFACE_UTMI)
+ omap2430_musb_set_vbus(musb, 1);
+
+ }
+#endif
+ } else {
+ otg_init(musb->xceiv);
+ if (data->interface_type ==
+ MUSB_INTERFACE_UTMI)
+ omap2430_musb_set_vbus(musb, 1);
+ }
+ break;
+
+ case USB_EVENT_VBUS:
+ DBG(4, "VBUS Connect\n");
+
+ otg_init(musb->xceiv);
+ break;
+
+ case USB_EVENT_NONE:
+ DBG(4, "VBUS Disconnect\n");
+
+ if (data->interface_type == MUSB_INTERFACE_UTMI) {
+ if (musb->xceiv->set_vbus)
+ otg_set_vbus(musb->xceiv, 0);
+ }
+ otg_shutdown(musb->xceiv);
+ break;
+ default:
+ DBG(4, "ID float\n");
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+ u32 l, status = 0;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
struct omap_musb_board_data *data = plat->board_data;
@@ -204,7 +307,7 @@ int __init musb_platform_init(struct musb *musb)
return -ENODEV;
}
- musb_platform_resume(musb);
+ omap2430_low_level_init(musb);
l = musb_readl(musb->mregs, OTG_SYSCONFIG);
l &= ~ENABLEWAKEUP; /* disable wakeup */
@@ -241,87 +344,214 @@ int __init musb_platform_init(struct musb *musb)
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- if (is_host_enabled(musb))
- musb->board_set_vbus = omap_set_vbus;
+ musb->nb.notifier_call = musb_otg_notifications;
+ status = otg_register_notifier(musb->xceiv, &musb->nb);
+
+ if (status)
+ DBG(1, "notification register failed\n");
+
+ /* check whether cable is already connected */
+ if (musb->xceiv->state ==OTG_STATE_B_IDLE)
+ musb_otg_notifications(&musb->nb, 1,
+ musb->xceiv->gadget);
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
return 0;
}
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context)
+static int omap2430_musb_exit(struct musb *musb)
{
- musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
- musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
-}
-void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context)
-{
- musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
- musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
+ omap2430_low_level_exit(musb);
+ otg_put_transceiver(musb->xceiv);
+
+ return 0;
}
-#endif
-static int musb_platform_suspend(struct musb *musb)
+static const struct musb_platform_ops omap2430_ops = {
+ .init = omap2430_musb_init,
+ .exit = omap2430_musb_exit,
+
+ .set_mode = omap2430_musb_set_mode,
+ .try_idle = omap2430_musb_try_idle,
+
+ .set_vbus = omap2430_musb_set_vbus,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __init omap2430_probe(struct platform_device *pdev)
{
- u32 l;
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct omap2430_glue *glue;
+ struct clk *clk;
- if (!musb->clock)
- return 0;
+ int ret = -ENOMEM;
- /* in any role */
- l = musb_readl(musb->mregs, OTG_FORCESTDBY);
- l |= ENABLEFORCE; /* enable MSTANDBY */
- musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
- l = musb_readl(musb->mregs, OTG_SYSCONFIG);
- l |= ENABLEWAKEUP; /* enable wakeup */
- musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
- otg_set_suspend(musb->xceiv, 1);
+ clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
- else
- clk_disable(musb->clock);
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &omap2430_dmamask;
+ musb->dev.coherent_dma_mask = omap2430_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &omap2430_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
}
-static int musb_platform_resume(struct musb *musb)
+static int __exit omap2430_remove(struct platform_device *pdev)
{
- u32 l;
+ struct omap2430_glue *glue = platform_get_drvdata(pdev);
- if (!musb->clock)
- return 0;
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
- otg_set_suspend(musb->xceiv, 0);
+ return 0;
+}
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
- else
- clk_enable(musb->clock);
+#ifdef CONFIG_PM
+static void omap2430_save_context(struct musb *musb)
+{
+ musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
+ musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
+}
- l = musb_readl(musb->mregs, OTG_SYSCONFIG);
- l &= ~ENABLEWAKEUP; /* disable wakeup */
- musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+static void omap2430_restore_context(struct musb *musb)
+{
+ musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
+ musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
+}
- l = musb_readl(musb->mregs, OTG_FORCESTDBY);
- l &= ~ENABLEFORCE; /* disable MSTANDBY */
- musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+static int omap2430_suspend(struct device *dev)
+{
+ struct omap2430_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+
+ omap2430_low_level_exit(musb);
+ otg_set_suspend(musb->xceiv, 1);
+ omap2430_save_context(musb);
+ clk_disable(glue->clk);
return 0;
}
-
-int musb_platform_exit(struct musb *musb)
+static int omap2430_resume(struct device *dev)
{
+ struct omap2430_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+ int ret;
+
+ ret = clk_enable(glue->clk);
+ if (ret) {
+ dev_err(dev, "faled to enable clock\n");
+ return ret;
+ }
- musb_platform_suspend(musb);
+ omap2430_low_level_init(musb);
+ omap2430_restore_context(musb);
+ otg_set_suspend(musb->xceiv, 0);
- otg_put_transceiver(musb->xceiv);
return 0;
}
+
+static struct dev_pm_ops omap2430_pm_ops = {
+ .suspend = omap2430_suspend,
+ .resume = omap2430_resume,
+};
+
+#define DEV_PM_OPS (&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver omap2430_driver = {
+ .remove = __exit_p(omap2430_remove),
+ .driver = {
+ .name = "musb-omap2430",
+ .pm = DEV_PM_OPS,
+ },
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+ return platform_driver_probe(&omap2430_driver, omap2430_probe);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+ platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 41b04b906ce1..2ba3b070ed0b 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -21,10 +21,16 @@
#include <linux/usb.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include "musb_core.h"
-static void tusb_source_power(struct musb *musb, int is_on);
+struct tusb6010_glue {
+ struct device *dev;
+ struct platform_device *musb;
+};
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
@@ -50,7 +56,7 @@ u8 tusb_get_revision(struct musb *musb)
return rev;
}
-static int __init tusb_print_revision(struct musb *musb)
+static int tusb_print_revision(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u8 rev;
@@ -275,17 +281,6 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
void __iomem *tbase = musb->ctrl_base;
u32 reg;
- /*
- * Keep clock active when enabled. Note that this is not tied to
- * drawing VBUS, as with OTG mA can be less than musb->min_power.
- */
- if (musb->set_clock) {
- if (mA)
- musb->set_clock(musb->clock, 1);
- else
- musb->set_clock(musb->clock, 0);
- }
-
/* tps65030 seems to consume max 100mA, with maybe 60mA available
* (measured on one board) for things other than tps and tusb.
*
@@ -348,7 +343,7 @@ static void tusb_set_clock_source(struct musb *musb, unsigned mode)
* USB link is not suspended ... and tells us the relevant wakeup
* events. SW_EN for voltage is handled separately.
*/
-void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
{
void __iomem *tbase = musb->ctrl_base;
u32 reg;
@@ -385,7 +380,7 @@ void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
/*
* Updates cable VBUS status. Caller must take care of locking.
*/
-int musb_platform_get_vbus_status(struct musb *musb)
+static int tusb_musb_vbus_status(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
u32 otg_stat, prcm_mngmt;
@@ -431,7 +426,7 @@ static void musb_do_idle(unsigned long _musb)
}
/* FALLTHROUGH */
case OTG_STATE_A_IDLE:
- tusb_source_power(musb, 0);
+ tusb_musb_set_vbus(musb, 0);
default:
break;
}
@@ -475,7 +470,7 @@ done:
* we don't want to treat that full speed J as a wakeup event.
* ... peripherals must draw only suspend current after 10 msec.
*/
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
{
unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
static unsigned long last_timer;
@@ -515,7 +510,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
| TUSB_DEV_OTG_TIMER_ENABLE) \
: 0)
-static void tusb_source_power(struct musb *musb, int is_on)
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
{
void __iomem *tbase = musb->ctrl_base;
u32 conf, prcm, timer;
@@ -531,8 +526,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- if (musb->set_clock)
- musb->set_clock(musb->clock, 1);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -571,8 +564,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
devctl &= ~MUSB_DEVCTL_SESSION;
conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
- if (musb->set_clock)
- musb->set_clock(musb->clock, 0);
}
prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
@@ -599,7 +590,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
* and peripheral modes in non-OTG configurations by reconfiguring hardware
* and then setting musb->board_mode. For now, only support OTG mode.
*/
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
{
void __iomem *tbase = musb->ctrl_base;
u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
@@ -677,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
default_a = is_host_enabled(musb);
DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
musb->xceiv->default_a = default_a;
- tusb_source_power(musb, default_a);
+ tusb_musb_set_vbus(musb, default_a);
/* Don't allow idling immediately */
if (default_a)
@@ -722,7 +713,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
DBG(2, "Got SRP, turning on VBUS\n");
- musb_set_vbus(musb, 1);
+ musb_platform_set_vbus(musb, 1);
/* CONNECT can wake if a_wait_bcon is set */
if (musb->a_wait_bcon != 0)
@@ -748,11 +739,11 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
*/
if (musb->vbuserr_retry) {
musb->vbuserr_retry--;
- tusb_source_power(musb, 1);
+ tusb_musb_set_vbus(musb, 1);
} else {
musb->vbuserr_retry
= VBUSERR_RETRY_COUNT;
- tusb_source_power(musb, 0);
+ tusb_musb_set_vbus(musb, 0);
}
break;
default:
@@ -786,7 +777,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
} else {
/* REVISIT report overcurrent to hub? */
ERR("vbus too slow, devctl %02x\n", devctl);
- tusb_source_power(musb, 0);
+ tusb_musb_set_vbus(musb, 0);
}
break;
case OTG_STATE_A_WAIT_BCON:
@@ -807,7 +798,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
return idle_timeout;
}
-static irqreturn_t tusb_interrupt(int irq, void *__hci)
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
{
struct musb *musb = __hci;
void __iomem *tbase = musb->ctrl_base;
@@ -911,7 +902,7 @@ static irqreturn_t tusb_interrupt(int irq, void *__hci)
musb_writel(tbase, TUSB_INT_SRC_CLEAR,
int_src & ~TUSB_INT_MASK_RESERVED_BITS);
- musb_platform_try_idle(musb, idle_timeout);
+ tusb_musb_try_idle(musb, idle_timeout);
musb_writel(tbase, TUSB_INT_MASK, int_mask);
spin_unlock_irqrestore(&musb->lock, flags);
@@ -926,7 +917,7 @@ static int dma_off;
* REVISIT:
* - Check what is unnecessary in MGC_HdrcStart()
*/
-void musb_platform_enable(struct musb *musb)
+static void tusb_musb_enable(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
@@ -970,7 +961,7 @@ void musb_platform_enable(struct musb *musb)
/*
* Disables TUSB6010. Caller must take care of locking.
*/
-void musb_platform_disable(struct musb *musb)
+static void tusb_musb_disable(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
@@ -995,7 +986,7 @@ void musb_platform_disable(struct musb *musb)
* Sets up TUSB6010 CPU interface specific signals and registers
* Note: Settings optimized for OMAP24xx
*/
-static void __init tusb_setup_cpu_interface(struct musb *musb)
+static void tusb_setup_cpu_interface(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
@@ -1022,7 +1013,7 @@ static void __init tusb_setup_cpu_interface(struct musb *musb)
musb_writel(tbase, TUSB_WAIT_COUNT, 1);
}
-static int __init tusb_start(struct musb *musb)
+static int tusb_musb_start(struct musb *musb)
{
void __iomem *tbase = musb->ctrl_base;
int ret = 0;
@@ -1091,7 +1082,7 @@ err:
return -ENODEV;
}
-int __init musb_platform_init(struct musb *musb)
+static int tusb_musb_init(struct musb *musb)
{
struct platform_device *pdev;
struct resource *mem;
@@ -1131,16 +1122,14 @@ int __init musb_platform_init(struct musb *musb)
*/
musb->mregs += TUSB_BASE_OFFSET;
- ret = tusb_start(musb);
+ ret = tusb_musb_start(musb);
if (ret) {
printk(KERN_ERR "Could not start tusb6010 (%d)\n",
ret);
goto done;
}
- musb->isr = tusb_interrupt;
+ musb->isr = tusb_musb_interrupt;
- if (is_host_enabled(musb))
- musb->board_set_vbus = tusb_source_power;
if (is_peripheral_enabled(musb)) {
musb->xceiv->set_power = tusb_draw_power;
the_musb = musb;
@@ -1159,7 +1148,7 @@ done:
return ret;
}
-int musb_platform_exit(struct musb *musb)
+static int tusb_musb_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
the_musb = NULL;
@@ -1173,3 +1162,115 @@ int musb_platform_exit(struct musb *musb)
usb_nop_xceiv_unregister();
return 0;
}
+
+static const struct musb_platform_ops tusb_ops = {
+ .init = tusb_musb_init,
+ .exit = tusb_musb_exit,
+
+ .enable = tusb_musb_enable,
+ .disable = tusb_musb_disable,
+
+ .set_mode = tusb_musb_set_mode,
+ .try_idle = tusb_musb_try_idle,
+
+ .vbus_status = tusb_musb_vbus_status,
+ .set_vbus = tusb_musb_set_vbus,
+};
+
+static u64 tusb_dmamask = DMA_BIT_MASK(32);
+
+static int __init tusb_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct tusb6010_glue *glue;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &tusb_dmamask;
+ musb->dev.coherent_dma_mask = tusb_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+
+ pdata->platform_ops = &tusb_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err2;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err2;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err1;
+ }
+
+ return 0;
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit tusb_remove(struct platform_device *pdev)
+{
+ struct tusb6010_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ kfree(glue);
+
+ return 0;
+}
+
+static struct platform_driver tusb_driver = {
+ .remove = __exit_p(tusb_remove),
+ .driver = {
+ .name = "musb-tusb",
+ },
+};
+
+MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init tusb_init(void)
+{
+ return platform_driver_probe(&tusb_driver, tusb_probe);
+}
+subsys_initcall(tusb_init);
+
+static void __exit tusb_exit(void)
+{
+ platform_driver_unregister(&tusb_driver);
+}
+module_exit(tusb_exit);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
new file mode 100644
index 000000000000..d6384e4aeef9
--- /dev/null
+++ b/drivers/usb/musb/ux500.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * Based on omap2430.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+struct ux500_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+#define glue_to_musb(g) platform_get_drvdata(g->musb)
+
+static int ux500_musb_init(struct musb *musb)
+{
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ pr_err("HS USB OTG: no transceiver configured\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int ux500_musb_exit(struct musb *musb)
+{
+ otg_put_transceiver(musb->xceiv);
+
+ return 0;
+}
+
+static const struct musb_platform_ops ux500_ops = {
+ .init = ux500_musb_init,
+ .exit = ux500_musb_exit,
+};
+
+static int __init ux500_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct ux500_glue *glue;
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ clk = clk_get(&pdev->dev, "usb");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &ux500_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
+
+ return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit ux500_remove(struct platform_device *pdev)
+{
+ struct ux500_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ux500_suspend(struct device *dev)
+{
+ struct ux500_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+
+ otg_set_suspend(musb->xceiv, 1);
+ clk_disable(glue->clk);
+
+ return 0;
+}
+
+static int ux500_resume(struct device *dev)
+{
+ struct ux500_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+ int ret;
+
+ ret = clk_enable(glue->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ otg_set_suspend(musb->xceiv, 0);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ux500_pm_ops = {
+ .suspend = ux500_suspend,
+ .resume = ux500_resume,
+};
+
+#define DEV_PM_OPS (&ux500_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+static struct platform_driver ux500_driver = {
+ .remove = __exit_p(ux500_remove),
+ .driver = {
+ .name = "musb-ux500",
+ .pm = DEV_PM_OPS,
+ },
+};
+
+MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
+MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init ux500_init(void)
+{
+ return platform_driver_probe(&ux500_driver, ux500_probe);
+}
+subsys_initcall(ux500_init);
+
+static void __exit ux500_exit(void)
+{
+ platform_driver_unregister(&ux500_driver);
+}
+module_exit(ux500_exit);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6491717a636a..9fb875d5f09c 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,6 +59,18 @@ config TWL4030_USB
This transceiver supports high and full speed devices plus,
in host mode, low speed.
+config TWL6030_USB
+ tristate "TWL6030 USB Transceiver Driver"
+ depends on TWL4030_CORE
+ select USB_OTG_UTILS
+ help
+ Enable this to support the USB OTG transceiver on TWL6030
+ family chips. This TWL6030 transceiver has the VBUS and ID GND
+ and OTG SRP events capabilities. For all other transceiver functionality
+ UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+ are hooked to this driver through platform_data structure.
+ The definition of internal PHY APIs are in the mach-omap2 layer.
+
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_OTG_UTILS
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 30a23f3b7a1f..a520e715cfd6 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
+obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o
obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
obj-$(CONFIG_USB_ULPI) += ulpi.o
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
new file mode 100644
index 000000000000..28f770103640
--- /dev/null
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -0,0 +1,493 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB 0x00
+#define USB_VENDOR_ID_MSB 0x01
+#define USB_PRODUCT_ID_LSB 0x02
+#define USB_PRODUCT_ID_MSB 0x03
+#define USB_VBUS_CTRL_SET 0x04
+#define USB_VBUS_CTRL_CLR 0x05
+#define USB_ID_CTRL_SET 0x06
+#define USB_ID_CTRL_CLR 0x07
+#define USB_VBUS_INT_SRC 0x08
+#define USB_VBUS_INT_LATCH_SET 0x09
+#define USB_VBUS_INT_LATCH_CLR 0x0A
+#define USB_VBUS_INT_EN_LO_SET 0x0B
+#define USB_VBUS_INT_EN_LO_CLR 0x0C
+#define USB_VBUS_INT_EN_HI_SET 0x0D
+#define USB_VBUS_INT_EN_HI_CLR 0x0E
+#define USB_ID_INT_SRC 0x0F
+#define USB_ID_INT_LATCH_SET 0x10
+#define USB_ID_INT_LATCH_CLR 0x11
+
+#define USB_ID_INT_EN_LO_SET 0x12
+#define USB_ID_INT_EN_LO_CLR 0x13
+#define USB_ID_INT_EN_HI_SET 0x14
+#define USB_ID_INT_EN_HI_CLR 0x15
+#define USB_OTG_ADP_CTRL 0x16
+#define USB_OTG_ADP_HIGH 0x17
+#define USB_OTG_ADP_LOW 0x18
+#define USB_OTG_ADP_RISE 0x19
+#define USB_OTG_REVISION 0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2 0xE5
+#define TWL6030_CFG_LDO_PD2 0xF5
+#define TWL6030_BACKUP_REG 0xFA
+
+#define STS_HW_CONDITIONS 0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS 0x21
+#define STS_USB_ID BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS 0x71
+#define VUSB_CFG_STATE 0x72
+#define VUSB_CFG_VOLTAGE 0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1 0x8
+
+#define CONTROLLER_STAT1 0x03
+#define VBUS_DET BIT(2)
+
+struct twl6030_usb {
+ struct otg_transceiver otg;
+ struct device *dev;
+
+ /* for vbus reporting with irqs disabled */
+ spinlock_t lock;
+
+ struct regulator *usb3v3;
+
+ int irq1;
+ int irq2;
+ u8 linkstat;
+ u8 asleep;
+ bool irq_enabled;
+};
+
+#define xceiv_to_twl(x) container_of((x), struct twl6030_usb, otg);
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+ u8 data, u8 address)
+{
+ int ret = 0;
+
+ ret = twl_i2c_write_u8(module, data, address);
+ if (ret < 0)
+ dev_err(twl->dev,
+ "Write[0x%x] Error %d\n", address, ret);
+ return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+ u8 data, ret = 0;
+
+ ret = twl_i2c_read_u8(module, &data, address);
+ if (ret >= 0)
+ ret = data;
+ else
+ dev_err(twl->dev,
+ "readb[0x%x,0x%x] Error %d\n",
+ module, address, ret);
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
+{
+ struct twl6030_usb *twl;
+ struct device *dev;
+ struct twl4030_usb_data *pdata;
+
+ twl = xceiv_to_twl(x);
+ dev = twl->dev;
+ pdata = dev->platform_data;
+
+ pdata->phy_set_clock(twl->dev, on);
+
+ return 0;
+}
+
+static int twl6030_phy_init(struct otg_transceiver *x)
+{
+ u8 hw_state;
+ struct twl6030_usb *twl;
+ struct device *dev;
+ struct twl4030_usb_data *pdata;
+
+ twl = xceiv_to_twl(x);
+ dev = twl->dev;
+ pdata = dev->platform_data;
+
+ regulator_enable(twl->usb3v3);
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ if (hw_state & STS_USB_ID)
+ pdata->phy_power(twl->dev, 1, 1);
+ else
+ pdata->phy_power(twl->dev, 0, 1);
+
+ return 0;
+}
+
+static void twl6030_phy_shutdown(struct otg_transceiver *x)
+{
+ struct twl6030_usb *twl;
+ struct device *dev;
+ struct twl4030_usb_data *pdata;
+
+ twl = xceiv_to_twl(x);
+ dev = twl->dev;
+ pdata = dev->platform_data;
+ pdata->phy_power(twl->dev, 0, 0);
+ regulator_disable(twl->usb3v3);
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+
+ /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
+
+ /* Program CFG_LDO_PD2 register and set VUSB bit */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
+
+ /* Program MISC2 register and set bit VUSB_IN_VBAT */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
+
+ twl->usb3v3 = regulator_get(twl->dev, "vusb");
+ if (IS_ERR(twl->usb3v3))
+ return -ENODEV;
+
+ regulator_enable(twl->usb3v3);
+
+ /* Program the VUSB_CFG_TRANS for ACTIVE state. */
+ twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
+ VUSB_CFG_TRANS);
+
+ /* Program the VUSB_CFG_STATE register to ON on all groups. */
+ twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
+ VUSB_CFG_STATE);
+
+ /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+ /*
+ * Program the USB_ID_CTRL_SET register to enable GND drive
+ * and the ID comparators
+ */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+ return 0;
+}
+
+static ssize_t twl6030_usb_vbus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl6030_usb *twl = dev_get_drvdata(dev);
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&twl->lock, flags);
+
+ switch (twl->linkstat) {
+ case USB_EVENT_VBUS:
+ ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+ break;
+ case USB_EVENT_ID:
+ ret = snprintf(buf, PAGE_SIZE, "id\n");
+ break;
+ case USB_EVENT_NONE:
+ ret = snprintf(buf, PAGE_SIZE, "none\n");
+ break;
+ default:
+ ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+ }
+ spin_unlock_irqrestore(&twl->lock, flags);
+
+ return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ int status;
+ u8 vbus_state, hw_state;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+ CONTROLLER_STAT1);
+ if (!(hw_state & STS_USB_ID)) {
+ if (vbus_state & VBUS_DET) {
+ status = USB_EVENT_VBUS;
+ twl->otg.default_a = false;
+ twl->otg.state = OTG_STATE_B_IDLE;
+ } else {
+ status = USB_EVENT_NONE;
+ }
+ if (status >= 0) {
+ twl->linkstat = status;
+ blocking_notifier_call_chain(&twl->otg.notifier,
+ status, twl->otg.gadget);
+ }
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ int status = USB_EVENT_NONE;
+ u8 hw_state;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ if (hw_state & STS_USB_ID) {
+
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+ 0x10);
+ status = USB_EVENT_ID;
+ twl->otg.default_a = true;
+ twl->otg.state = OTG_STATE_A_IDLE;
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
+ } else {
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
+ 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+ 0x1);
+ }
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl->linkstat = status;
+
+ return IRQ_HANDLED;
+}
+
+static int twl6030_set_peripheral(struct otg_transceiver *x,
+ struct usb_gadget *gadget)
+{
+ struct twl6030_usb *twl;
+
+ if (!x)
+ return -ENODEV;
+
+ twl = xceiv_to_twl(x);
+ twl->otg.gadget = gadget;
+ if (!gadget)
+ twl->otg.state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int twl6030_enable_irq(struct otg_transceiver *x)
+{
+ struct twl6030_usb *twl = xceiv_to_twl(x);
+
+ twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_STS_C);
+ twl6030_usb_irq(twl->irq2, twl);
+ twl6030_usbotg_irq(twl->irq1, twl);
+
+ return 0;
+}
+
+static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+{
+ struct twl6030_usb *twl = xceiv_to_twl(x);
+
+ /*
+ * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+ * register. This enables boost mode.
+ */
+ if (enabled)
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
+ CHARGERUSB_CTRL1);
+ else
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
+ CHARGERUSB_CTRL1);
+ return 0;
+}
+
+static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+ struct twl6030_usb *twl;
+
+ if (!x)
+ return -ENODEV;
+
+ twl = xceiv_to_twl(x);
+ twl->otg.host = host;
+ if (!host)
+ twl->otg.state = OTG_STATE_UNDEFINED;
+ return 0;
+}
+
+static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+{
+ struct twl6030_usb *twl;
+ int status, err;
+ struct twl4030_usb_data *pdata;
+ struct device *dev = &pdev->dev;
+ pdata = dev->platform_data;
+
+ twl = kzalloc(sizeof *twl, GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ twl->dev = &pdev->dev;
+ twl->irq1 = platform_get_irq(pdev, 0);
+ twl->irq2 = platform_get_irq(pdev, 1);
+ twl->otg.dev = twl->dev;
+ twl->otg.label = "twl6030";
+ twl->otg.set_host = twl6030_set_host;
+ twl->otg.set_peripheral = twl6030_set_peripheral;
+ twl->otg.set_vbus = twl6030_set_vbus;
+ twl->otg.init = twl6030_phy_init;
+ twl->otg.shutdown = twl6030_phy_shutdown;
+
+ /* init spinlock for workqueue */
+ spin_lock_init(&twl->lock);
+
+ err = twl6030_usb_ldo_init(twl);
+ if (err) {
+ dev_err(&pdev->dev, "ldo init failed\n");
+ kfree(twl);
+ return err;
+ }
+ otg_set_transceiver(&twl->otg);
+
+ platform_set_drvdata(pdev, twl);
+ if (device_create_file(&pdev->dev, &dev_attr_vbus))
+ dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+ BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
+ twl->irq_enabled = true;
+ status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq1, status);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ kfree(twl);
+ return status;
+ }
+
+ status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq2, status);
+ free_irq(twl->irq1, twl);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ kfree(twl);
+ return status;
+ }
+
+ pdata->phy_init(dev);
+ twl6030_enable_irq(&twl->otg);
+ dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+ return 0;
+}
+
+static int __exit twl6030_usb_remove(struct platform_device *pdev)
+{
+ struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+ struct twl4030_usb_data *pdata;
+ struct device *dev = &pdev->dev;
+ pdata = dev->platform_data;
+
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_STS_C);
+ free_irq(twl->irq1, twl);
+ free_irq(twl->irq2, twl);
+ regulator_put(twl->usb3v3);
+ pdata->phy_exit(twl->dev);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ kfree(twl);
+
+ return 0;
+}
+
+static struct platform_driver twl6030_usb_driver = {
+ .probe = twl6030_usb_probe,
+ .remove = __exit_p(twl6030_usb_remove),
+ .driver = {
+ .name = "twl6030_usb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init twl6030_usb_init(void)
+{
+ return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+ platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index c760991b354a..61b9609e55f2 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -593,6 +593,13 @@ enum twl4030_usb_mode {
struct twl4030_usb_data {
enum twl4030_usb_mode usb_mode;
+
+ int (*phy_init)(struct device *dev);
+ int (*phy_exit)(struct device *dev);
+ /* Power on/off the PHY */
+ int (*phy_power)(struct device *dev, int iD, int on);
+ /* enable/disable phy clocks */
+ int (*phy_set_clock)(struct device *dev, int on);
};
struct twl4030_ins {
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index ee2dd1d506ed..0b0e383035e5 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -3,7 +3,7 @@
* Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
*
* Board initialization should put one of these into dev->platform_data,
- * probably on some platform_device named "musb_hdrc". It encapsulates
+ * probably on some platform_device named "musb-hdrc". It encapsulates
* key configuration differences between boards.
*/
@@ -118,14 +118,14 @@ struct musb_hdrc_platform_data {
/* Power the device on or off */
int (*set_power)(int state);
- /* Turn device clock on or off */
- int (*set_clock)(struct clk *clock, int is_on);
-
/* MUSB configuration-specific details */
struct musb_hdrc_config *config;
/* Architecture specific board data */
void *board_data;
+
+ /* Platform specific struct musb_ops pointer */
+ const void *platform_ops;
};