summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ata/Kconfig8
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/pata_icside.c686
3 files changed, 695 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e0820e8dd1c7..77846dd0a4fa 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -552,6 +552,14 @@ config PATA_PLATFORM
If unsure, say N.
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
+ help
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
config PATA_IXP4XX_CF
tristate "IXP4XX Compact Flash support"
depends on ARCH_IXP4XX
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 13d7397e0008..cc8798b1a54f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
# Should be last but one libata driver
obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
# Should be last libata driver
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
new file mode 100644
index 000000000000..dbc8ee2adcf0
--- /dev/null
+++ b/drivers/ata/pata_icside.c
@@ -0,0 +1,686 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+
+#include <asm/dma.h>
+#include <asm/ecard.h>
+
+#define DRV_NAME "pata_icside"
+
+#define ICS_IDENT_OFFSET 0x2280
+
+#define ICS_ARCIN_V5_INTRSTAT 0x0000
+#define ICS_ARCIN_V5_INTROFFSET 0x0004
+
+#define ICS_ARCIN_V6_INTROFFSET_1 0x2200
+#define ICS_ARCIN_V6_INTRSTAT_1 0x2290
+#define ICS_ARCIN_V6_INTROFFSET_2 0x3200
+#define ICS_ARCIN_V6_INTRSTAT_2 0x3290
+
+struct portinfo {
+ unsigned int dataoffset;
+ unsigned int ctrloffset;
+ unsigned int stepping;
+};
+
+static const struct portinfo pata_icside_portinfo_v5 = {
+ .dataoffset = 0x2800,
+ .ctrloffset = 0x2b80,
+ .stepping = 6,
+};
+
+static const struct portinfo pata_icside_portinfo_v6_1 = {
+ .dataoffset = 0x2000,
+ .ctrloffset = 0x2380,
+ .stepping = 6,
+};
+
+static const struct portinfo pata_icside_portinfo_v6_2 = {
+ .dataoffset = 0x3000,
+ .ctrloffset = 0x3380,
+ .stepping = 6,
+};
+
+#define PATA_ICSIDE_MAX_SG 128
+
+struct pata_icside_state {
+ void __iomem *irq_port;
+ void __iomem *ioc_base;
+ unsigned int type;
+ unsigned int dma;
+ struct {
+ u8 port_sel;
+ u8 disabled;
+ unsigned int speed[ATA_MAX_DEVICES];
+ } port[2];
+ struct scatterlist sg[PATA_ICSIDE_MAX_SG];
+};
+
+#define ICS_TYPE_A3IN 0
+#define ICS_TYPE_A3USER 1
+#define ICS_TYPE_V6 3
+#define ICS_TYPE_V5 15
+#define ICS_TYPE_NOTYPE ((unsigned int)-1)
+
+/* ---------------- Version 5 PCB Support Functions --------------------- */
+/* Prototype: pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose : enable interrupts from card
+ */
+static void pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+ struct pata_icside_state *state = ec->irq_data;
+
+ writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+/* Prototype: pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+ * Purpose : disable interrupts from card
+ */
+static void pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
+{
+ struct pata_icside_state *state = ec->irq_data;
+
+ readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
+}
+
+static const expansioncard_ops_t pata_icside_ops_arcin_v5 = {
+ .irqenable = pata_icside_irqenable_arcin_v5,
+ .irqdisable = pata_icside_irqdisable_arcin_v5,
+};
+
+
+/* ---------------- Version 6 PCB Support Functions --------------------- */
+/* Prototype: pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose : enable interrupts from card
+ */
+static void pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+ struct pata_icside_state *state = ec->irq_data;
+ void __iomem *base = state->irq_port;
+
+ if (!state->port[0].disabled)
+ writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+ if (!state->port[1].disabled)
+ writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+ * Purpose : disable interrupts from card
+ */
+static void pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
+{
+ struct pata_icside_state *state = ec->irq_data;
+
+ readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
+ readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
+}
+
+/* Prototype: pata_icside_irqprobe(struct expansion_card *ec)
+ * Purpose : detect an active interrupt from card
+ */
+static int pata_icside_irqpending_arcin_v6(struct expansion_card *ec)
+{
+ struct pata_icside_state *state = ec->irq_data;
+
+ return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
+ readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
+}
+
+static const expansioncard_ops_t pata_icside_ops_arcin_v6 = {
+ .irqenable = pata_icside_irqenable_arcin_v6,
+ .irqdisable = pata_icside_irqdisable_arcin_v6,
+ .irqpending = pata_icside_irqpending_arcin_v6,
+};
+
+
+/*
+ * SG-DMA support.
+ *
+ * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
+ * There is only one DMA controller per card, which means that only
+ * one drive can be accessed at one time. NOTE! We do not enforce that
+ * here, but we rely on the main IDE driver spotting that both
+ * interfaces use the same IRQ, which should guarantee this.
+ */
+
+/*
+ * Configure the IOMD to give the appropriate timings for the transfer
+ * mode being requested. We take the advice of the ATA standards, and
+ * calculate the cycle time based on the transfer mode, and the EIDE
+ * MW DMA specs that the drive provides in the IDENTIFY command.
+ *
+ * We have the following IOMD DMA modes to choose from:
+ *
+ * Type Active Recovery Cycle
+ * A 250 (250) 312 (550) 562 (800)
+ * B 187 (200) 250 (550) 437 (750)
+ * C 125 (125) 125 (375) 250 (500)
+ * D 62 (50) 125 (375) 187 (425)
+ *
+ * (figures in brackets are actual measured timings on DIOR/DIOW)
+ *
+ * However, we also need to take care of the read/write active and
+ * recovery timings:
+ *
+ * Read Write
+ * Mode Active -- Recovery -- Cycle IOMD type
+ * MW0 215 50 215 480 A
+ * MW1 80 50 50 150 C
+ * MW2 70 25 25 120 C
+ */
+static void pata_icside_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pata_icside_state *state = ap->host->private_data;
+ struct ata_timing t;
+ unsigned int cycle;
+ char iomd_type;
+
+ /*
+ * DMA is based on a 16MHz clock
+ */
+ if (ata_timing_compute(adev, adev->dma_mode, &t, 1000, 1))
+ return;
+
+ /*
+ * Choose the IOMD cycle timing which ensure that the interface
+ * satisfies the measured active, recovery and cycle times.
+ */
+ if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425)
+ iomd_type = 'D', cycle = 187;
+ else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500)
+ iomd_type = 'C', cycle = 250;
+ else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750)
+ iomd_type = 'B', cycle = 437;
+ else
+ iomd_type = 'A', cycle = 562;
+
+ ata_dev_printk(adev, KERN_INFO, "timings: act %dns rec %dns cyc %dns (%c)\n",
+ t.active, t.recover, t.cycle, iomd_type);
+
+ state->port[ap->port_no].speed[adev->devno] = cycle;
+}
+
+static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_icside_state *state = ap->host->private_data;
+ struct scatterlist *sg, *rsg = state->sg;
+ unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
+
+ /*
+ * We are simplex; BUG if we try to fiddle with DMA
+ * while it's active.
+ */
+ BUG_ON(dma_channel_active(state->dma));
+
+ /*
+ * Copy ATAs scattered sg list into a contiguous array of sg
+ */
+ ata_for_each_sg(sg, qc) {
+ memcpy(rsg, sg, sizeof(*sg));
+ rsg++;
+ }
+
+ /*
+ * Route the DMA signals to the correct interface
+ */
+ writeb(state->port[ap->port_no].port_sel, state->ioc_base);
+
+ set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
+ set_dma_sg(state->dma, state->sg, rsg - state->sg);
+ set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+static void pata_icside_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_icside_state *state = ap->host->private_data;
+
+ BUG_ON(dma_channel_active(state->dma));
+ enable_dma(state->dma);
+}
+
+static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_icside_state *state = ap->host->private_data;
+
+ disable_dma(state->dma);
+
+ /* see ata_bmdma_stop */
+ ata_altstatus(ap);
+}
+
+static u8 pata_icside_bmdma_status(struct ata_port *ap)
+{
+ struct pata_icside_state *state = ap->host->private_data;
+ void __iomem *irq_port;
+
+ irq_port = state->irq_port + (ap->port_no ? ICS_ARCIN_V6_INTRSTAT_2 :
+ ICS_ARCIN_V6_INTRSTAT_1);
+
+ return readb(irq_port) & 1 ? ATA_DMA_INTR : 0;
+}
+
+static int icside_dma_init(struct ata_probe_ent *ae, struct expansion_card *ec)
+{
+ struct pata_icside_state *state = ae->private_data;
+ int i;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ state->port[0].speed[i] = 480;
+ state->port[1].speed[i] = 480;
+ }
+
+ if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
+ state->dma = ec->dma;
+ ae->mwdma_mask = 0x07; /* MW0..2 */
+ }
+
+ return 0;
+}
+
+
+static int pata_icside_port_start(struct ata_port *ap)
+{
+ /* No PRD to alloc */
+ return ata_pad_alloc(ap, ap->dev);
+}
+
+static struct scsi_host_template pata_icside_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = PATA_ICSIDE_MAX_SG,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ~0, /* no dma boundaries */
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
+/* wish this was exported from libata-core */
+static void ata_dummy_noret(struct ata_port *port)
+{
+}
+
+/*
+ * We need to shut down unused ports to prevent spurious interrupts.
+ * FIXME: the libata core doesn't call this function for PATA interfaces.
+ */
+static void pata_icside_port_disable(struct ata_port *ap)
+{
+ struct pata_icside_state *state = ap->host->private_data;
+
+ ata_port_printk(ap, KERN_ERR, "disabling icside port\n");
+
+ ata_port_disable(ap);
+
+ state->port[ap->port_no].disabled = 1;
+
+ if (state->type == ICS_TYPE_V6) {
+ /*
+ * Disable interrupts from this port, otherwise we
+ * receive spurious interrupts from the floating
+ * interrupt line.
+ */
+ void __iomem *irq_port = state->irq_port +
+ (ap->port_no ? ICS_ARCIN_V6_INTROFFSET_2 : ICS_ARCIN_V6_INTROFFSET_1);
+ readb(irq_port);
+ }
+}
+
+static u8 pata_icside_irq_ack(struct ata_port *ap, unsigned int chk_drq)
+{
+ unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
+ u8 status;
+
+ status = ata_busy_wait(ap, bits, 1000);
+ if (status & bits)
+ if (ata_msg_err(ap))
+ printk(KERN_ERR "abnormal status 0x%X\n", status);
+
+ if (ata_msg_intr(ap))
+ printk(KERN_INFO "%s: irq ack: drv_stat 0x%X\n",
+ __FUNCTION__, status);
+
+ return status;
+}
+
+static struct ata_port_operations pata_icside_port_ops = {
+ .port_disable = pata_icside_port_disable,
+
+ .set_dmamode = pata_icside_set_dmamode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = pata_icside_bmdma_setup,
+ .bmdma_start = pata_icside_bmdma_start,
+
+ .data_xfer = ata_data_xfer_noirq,
+
+ /* no need to build any PRD tables for DMA */
+ .qc_prep = ata_noop_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = pata_icside_bmdma_stop,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_dummy_noret,
+ .irq_on = ata_irq_on,
+ .irq_ack = pata_icside_irq_ack,
+
+ .port_start = pata_icside_port_start,
+
+ .bmdma_stop = pata_icside_bmdma_stop,
+ .bmdma_status = pata_icside_bmdma_status,
+};
+
+static void
+pata_icside_add_port(struct ata_probe_ent *ae, void __iomem *base,
+ const struct portinfo *info)
+{
+ struct ata_ioports *ioaddr = &ae->port[ae->n_ports++];
+ void __iomem *cmd = base + info->dataoffset;
+
+ ioaddr->cmd_addr = cmd;
+ ioaddr->data_addr = cmd + (ATA_REG_DATA << info->stepping);
+ ioaddr->error_addr = cmd + (ATA_REG_ERR << info->stepping);
+ ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << info->stepping);
+ ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << info->stepping);
+ ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << info->stepping);
+ ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << info->stepping);
+ ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << info->stepping);
+ ioaddr->device_addr = cmd + (ATA_REG_DEVICE << info->stepping);
+ ioaddr->status_addr = cmd + (ATA_REG_STATUS << info->stepping);
+ ioaddr->command_addr = cmd + (ATA_REG_CMD << info->stepping);
+
+ ioaddr->ctl_addr = base + info->ctrloffset;
+ ioaddr->altstatus_addr = ioaddr->ctl_addr;
+}
+
+static int __init
+pata_icside_register_v5(struct ata_probe_ent *ae, struct expansion_card *ec)
+{
+ struct pata_icside_state *state = ae->private_data;
+ void __iomem *base;
+
+ base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
+ ecard_resource_len(ec, ECARD_RES_MEMC));
+ if (!base)
+ return -ENOMEM;
+
+ state->irq_port = base;
+
+ ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
+ ec->irqmask = 1;
+ ec->irq_data = state;
+ ec->ops = &pata_icside_ops_arcin_v5;
+
+ /*
+ * Be on the safe side - disable interrupts
+ */
+ ec->ops->irqdisable(ec, ec->irq);
+
+ pata_icside_add_port(ae, base, &pata_icside_portinfo_v5);
+
+ return 0;
+}
+
+static int __init
+pata_icside_register_v6(struct ata_probe_ent *ae, struct expansion_card *ec)
+{
+ struct pata_icside_state *state = ae->private_data;
+ void __iomem *ioc_base, *easi_base;
+ unsigned int sel = 0;
+ int ret;
+
+ ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
+ ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ if (!ioc_base) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ easi_base = ioc_base;
+
+ if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
+ easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
+ ecard_resource_len(ec, ECARD_RES_EASI));
+ if (!easi_base) {
+ ret = -ENOMEM;
+ goto unmap_slot;
+ }
+
+ /*
+ * Enable access to the EASI region.
+ */
+ sel = 1 << 5;
+ }
+
+ writeb(sel, ioc_base);
+
+ ec->irq_data = state;
+ ec->ops = &pata_icside_ops_arcin_v6;
+
+ state->irq_port = easi_base;
+ state->ioc_base = ioc_base;
+ state->port[0].port_sel = sel;
+ state->port[1].port_sel = sel | 1;
+
+ /*
+ * Be on the safe side - disable interrupts
+ */
+ ec->ops->irqdisable(ec, ec->irq);
+
+ /*
+ * Find and register the interfaces.
+ */
+ pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_1);
+ pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_2);
+
+ /*
+ * FIXME: work around libata's aversion to calling port_disable.
+ * This permanently disables interrupts on port 0 - bad luck if
+ * you have a drive on that port.
+ */
+ state->port[0].disabled = 1;
+
+ return icside_dma_init(ae, ec);
+
+ unmap_slot:
+ iounmap(ioc_base);
+ out:
+ return ret;
+}
+
+static int __devinit
+pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ struct pata_icside_state *state;
+ struct ata_probe_ent ae;
+ void __iomem *idmem;
+ int ret;
+
+ ret = ecard_request_resources(ec);
+ if (ret)
+ goto out;
+
+ state = kzalloc(sizeof(struct pata_icside_state), GFP_KERNEL);
+ if (!state) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ state->type = ICS_TYPE_NOTYPE;
+ state->dma = NO_DMA;
+
+ idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
+ ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ if (idmem) {
+ unsigned int type;
+
+ type = readb(idmem + ICS_IDENT_OFFSET) & 1;
+ type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
+ type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
+ type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
+ iounmap(idmem);
+
+ state->type = type;
+ }
+
+ memset(&ae, 0, sizeof(ae));
+ INIT_LIST_HEAD(&ae.node);
+ ae.dev = &ec->dev;
+ ae.port_ops = &pata_icside_port_ops;
+ ae.sht = &pata_icside_sht;
+ ae.pio_mask = 0x1f;
+ ae.irq = ec->irq;
+ ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ ae._host_flags = ATA_HOST_SIMPLEX;
+ ae.private_data = state;
+
+ switch (state->type) {
+ case ICS_TYPE_A3IN:
+ dev_warn(&ec->dev, "A3IN unsupported\n");
+ ret = -ENODEV;
+ break;
+
+ case ICS_TYPE_A3USER:
+ dev_warn(&ec->dev, "A3USER unsupported\n");
+ ret = -ENODEV;
+ break;
+
+ case ICS_TYPE_V5:
+ ret = pata_icside_register_v5(&ae, ec);
+ break;
+
+ case ICS_TYPE_V6:
+ ret = pata_icside_register_v6(&ae, ec);
+ break;
+
+ default:
+ dev_warn(&ec->dev, "unknown interface type\n");
+ ret = -ENODEV;
+ break;
+ }
+
+ if (ret == 0)
+ ret = ata_device_add(&ae) == 0 ? -ENODEV : 0;
+
+ if (ret == 0)
+ goto out;
+
+ kfree(state);
+ release:
+ ecard_release_resources(ec);
+ out:
+ return ret;
+}
+
+static void pata_icside_shutdown(struct expansion_card *ec)
+{
+ struct ata_host *host = ecard_get_drvdata(ec);
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this card. We need to do
+ * this before disabling EASI since we may be accessing
+ * this register via that region.
+ */
+ local_irq_save(flags);
+ if (ec->ops)
+ ec->ops->irqdisable(ec, ec->irq);
+ local_irq_restore(flags);
+
+ /*
+ * Reset the ROM pointer so that we can read the ROM
+ * after a soft reboot. This also disables access to
+ * the IDE taskfile via the EASI region.
+ */
+ if (host) {
+ struct pata_icside_state *state = host->private_data;
+ if (state->ioc_base)
+ writeb(0, state->ioc_base);
+ }
+}
+
+static void __devexit pata_icside_remove(struct expansion_card *ec)
+{
+ struct ata_host *host = ecard_get_drvdata(ec);
+ struct pata_icside_state *state = host->private_data;
+
+ ata_host_detach(host);
+
+ pata_icside_shutdown(ec);
+
+ /*
+ * don't NULL out the drvdata - devres/libata wants it
+ * to free the ata_host structure.
+ */
+ ec->ops = NULL;
+ ec->irq_data = NULL;
+
+ if (state->dma != NO_DMA)
+ free_dma(state->dma);
+ if (state->ioc_base)
+ iounmap(state->ioc_base);
+ if (state->ioc_base != state->irq_port)
+ iounmap(state->irq_port);
+
+ kfree(state);
+ ecard_release_resources(ec);
+}
+
+static const struct ecard_id pata_icside_ids[] = {
+ { MANU_ICS, PROD_ICS_IDE },
+ { MANU_ICS2, PROD_ICS2_IDE },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver pata_icside_driver = {
+ .probe = pata_icside_probe,
+ .remove = __devexit_p(pata_icside_remove),
+ .shutdown = pata_icside_shutdown,
+ .id_table = pata_icside_ids,
+ .drv = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init pata_icside_init(void)
+{
+ return ecard_register_driver(&pata_icside_driver);
+}
+
+static void __exit pata_icside_exit(void)
+{
+ ecard_remove_driver(&pata_icside_driver);
+}
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ICS PATA driver");
+
+module_init(pata_icside_init);
+module_exit(pata_icside_exit);