diff options
-rw-r--r-- | Documentation/devicetree/bindings/mfd/s2mpa01.txt | 90 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/regulator/pfuze100.txt | 96 | ||||
-rw-r--r-- | drivers/mfd/sec-core.c | 112 | ||||
-rw-r--r-- | drivers/mfd/sec-irq.c | 97 | ||||
-rw-r--r-- | drivers/regulator/Kconfig | 22 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/max8973-regulator.c | 6 | ||||
-rw-r--r-- | drivers/regulator/max8997.c | 22 | ||||
-rw-r--r-- | drivers/regulator/max8998.c | 27 | ||||
-rw-r--r-- | drivers/regulator/mc13xxx-regulator-core.c | 12 | ||||
-rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 202 | ||||
-rw-r--r-- | drivers/regulator/rc5t583-regulator.c | 13 | ||||
-rw-r--r-- | drivers/regulator/s2mpa01.c | 481 | ||||
-rw-r--r-- | drivers/regulator/s2mps11.c | 360 | ||||
-rw-r--r-- | include/linux/mfd/samsung/core.h | 19 | ||||
-rw-r--r-- | include/linux/mfd/samsung/irq.h | 81 | ||||
-rw-r--r-- | include/linux/mfd/samsung/rtc.h | 57 | ||||
-rw-r--r-- | include/linux/mfd/samsung/s2mpa01.h | 192 | ||||
-rw-r--r-- | include/linux/mfd/samsung/s2mps14.h | 154 | ||||
-rw-r--r-- | include/linux/regulator/pfuze100.h | 14 |
21 files changed, 1843 insertions, 227 deletions
diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt new file mode 100644 index 000000000000..c13d3d8c3947 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/s2mpa01.txt @@ -0,0 +1,90 @@ + +* Samsung S2MPA01 Voltage and Current Regulator + +The Samsung S2MPA01 is a multi-function device which includes high +efficiency buck converters including Dual-Phase buck converter, various LDOs, +and an RTC. It is interfaced to the host controller using an I2C interface. +Each sub-block is addressed by the host system using different I2C slave +addresses. + +Required properties: +- compatible: Should be "samsung,s2mpa01-pmic". +- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s2mpa01 are delivered to. +- interrupts: An interrupt specifier for the sole interrupt generated by the + device. + +Optional nodes: +- regulators: The regulators of s2mpa01 that have to be instantiated should be + included in a sub-node named 'regulators'. Regulator nodes and constraints + included in this sub-node use the standard regulator bindings which are + documented elsewhere. + +Properties for BUCK regulator nodes: +- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 + (default), 25000, or 50000. May be 0 for disabling the ramp delay on + BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set + for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>. + + The following BUCKs share ramp settings: + * 1 and 6 + * 2 and 4 + * 8, 9, and 10 + +The following are the names of the regulators that the s2mpa01 PMIC block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of s2mpa01. + + - LDOn + - valid values for n are 1 to 26 + - Example: LDO1, LD02, LDO26 + - BUCKn + - valid values for n are 1 to 10. + - Example: BUCK1, BUCK2, BUCK9 + +Example: + + s2mpa01_pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 15ee89c3cc7b..f69bec294f02 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11 Voltage and Current Regulator +* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number as per the datasheet of s2mps11. - LDOn - - valid values for n are 1 to 38 + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS14: 1 to 25 - Example: LDO1, LD02, LDO28 - BUCKn - - valid values for n are 1 to 10. + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS14: 1 to 5 - Example: BUCK1, BUCK2, BUCK9 Example: diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index fc989b2e8057..34ef5d16d0f1 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -1,7 +1,7 @@ PFUZE100 family of regulators Required properties: -- compatible: "fsl,pfuze100" +- compatible: "fsl,pfuze100" or "fsl,pfuze200" - reg: I2C slave address Required child node: @@ -10,11 +10,14 @@ Required child node: Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are: + --PFUZE100 sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6 Each regulator is defined using the standard binding for regulators. -Example: +Example 1: PFUZE100 pmic: pfuze100@08 { compatible = "fsl,pfuze100"; @@ -113,3 +116,92 @@ Example: }; }; }; + + +Example 2: PFUZE200 + + pmic: pfuze200@08 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 714e2135210e..281a82747275 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -26,7 +26,9 @@ #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/irq.h> #include <linux/mfd/samsung/rtc.h> +#include <linux/mfd/samsung/s2mpa01.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s5m8763.h> #include <linux/mfd/samsung/s5m8767.h> #include <linux/regmap.h> @@ -69,18 +71,53 @@ static const struct mfd_cell s2mps11_devs[] = { } }; +static const struct mfd_cell s2mps14_devs[] = { + { + .name = "s2mps14-pmic", + }, { + .name = "s2mps14-rtc", + }, { + .name = "s2mps14-clk", + } +}; + +static const struct mfd_cell s2mpa01_devs[] = { + { + .name = "s2mpa01-pmic", + }, +}; + #ifdef CONFIG_OF static struct of_device_id sec_dt_match[] = { { .compatible = "samsung,s5m8767-pmic", .data = (void *)S5M8767X, - }, - { .compatible = "samsung,s2mps11-pmic", + }, { + .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, + }, { + .compatible = "samsung,s2mps14-pmic", + .data = (void *)S2MPS14X, + }, { + .compatible = "samsung,s2mpa01-pmic", + .data = (void *)S2MPA01, + }, { + /* Sentinel */ }, - {}, }; #endif +static bool s2mpa01_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case S2MPA01_REG_INT1M: + case S2MPA01_REG_INT2M: + case S2MPA01_REG_INT3M: + return false; + default: + return true; + } +} + static bool s2mps11_volatile(struct device *dev, unsigned int reg) { switch (reg) { @@ -111,6 +148,15 @@ static const struct regmap_config sec_regmap_config = { .val_bits = 8, }; +static const struct regmap_config s2mpa01_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPA01_REG_LDO_OVCB4, + .volatile_reg = s2mpa01_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mps11_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -120,6 +166,15 @@ static const struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps14_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS14_REG_LDODSCH3, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s5m8763_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -138,9 +193,18 @@ static const struct regmap_config s5m8767_regmap_config = { .cache_type = REGCACHE_FLAT, }; -static const struct regmap_config sec_rtc_regmap_config = { +static const struct regmap_config s5m_rtc_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SEC_RTC_REG_MAX, +}; + +static const struct regmap_config s2mps14_rtc_regmap_config = { .reg_bits = 8, .val_bits = 8, + + .max_register = S2MPS_RTC_REG_MAX, }; #ifdef CONFIG_OF @@ -180,24 +244,24 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( } #endif -static inline int sec_i2c_get_driver_data(struct i2c_client *i2c, +static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c, const struct i2c_device_id *id) { #ifdef CONFIG_OF if (i2c->dev.of_node) { const struct of_device_id *match; match = of_match_node(sec_dt_match, i2c->dev.of_node); - return (int)match->data; + return (unsigned long)match->data; } #endif - return (int)id->driver_data; + return id->driver_data; } static int sec_pmic_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev); - const struct regmap_config *regmap; + const struct regmap_config *regmap, *regmap_rtc; struct sec_pmic_dev *sec_pmic; int ret; @@ -229,17 +293,34 @@ static int sec_pmic_probe(struct i2c_client *i2c, } switch (sec_pmic->device_type) { + case S2MPA01: + regmap = &s2mpa01_regmap_config; + break; case S2MPS11X: regmap = &s2mps11_regmap_config; + /* + * The rtc-s5m driver does not support S2MPS11 and there + * is no mfd_cell for S2MPS11 RTC device. + * However we must pass something to devm_regmap_init_i2c() + * so use S5M-like regmap config even though it wouldn't work. + */ + regmap_rtc = &s5m_rtc_regmap_config; + break; + case S2MPS14X: + regmap = &s2mps14_regmap_config; + regmap_rtc = &s2mps14_rtc_regmap_config; break; case S5M8763X: regmap = &s5m8763_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; case S5M8767X: regmap = &s5m8767_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; default: regmap = &sec_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; } @@ -252,10 +333,13 @@ static int sec_pmic_probe(struct i2c_client *i2c, } sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR); + if (!sec_pmic->rtc) { + dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n"); + return -ENODEV; + } i2c_set_clientdata(sec_pmic->rtc, sec_pmic); - sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, - &sec_rtc_regmap_config); + sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc); if (IS_ERR(sec_pmic->regmap_rtc)) { ret = PTR_ERR(sec_pmic->regmap_rtc); dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n", @@ -283,10 +367,18 @@ static int sec_pmic_probe(struct i2c_client *i2c, ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); break; + case S2MPA01: + ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs, + ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL); + break; case S2MPS11X: ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); break; + case S2MPS14X: + ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs, + ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL); + break; default: /* If this happens the probe function is problem */ BUG(); diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index 4de494f51d40..64e7913aadc6 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -1,7 +1,7 @@ /* * sec-irq.c * - * Copyright (c) 2011 Samsung Electronics Co., Ltd + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify it @@ -19,6 +19,7 @@ #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/irq.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s5m8763.h> #include <linux/mfd/samsung/s5m8767.h> @@ -59,13 +60,13 @@ static const struct regmap_irq s2mps11_irqs[] = { .reg_offset = 1, .mask = S2MPS11_IRQ_RTC60S_MASK, }, - [S2MPS11_IRQ_RTCA1] = { + [S2MPS11_IRQ_RTCA0] = { .reg_offset = 1, - .mask = S2MPS11_IRQ_RTCA1_MASK, + .mask = S2MPS11_IRQ_RTCA0_MASK, }, - [S2MPS11_IRQ_RTCA2] = { + [S2MPS11_IRQ_RTCA1] = { .reg_offset = 1, - .mask = S2MPS11_IRQ_RTCA2_MASK, + .mask = S2MPS11_IRQ_RTCA1_MASK, }, [S2MPS11_IRQ_SMPL] = { .reg_offset = 1, @@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = { }, }; +static const struct regmap_irq s2mps14_irqs[] = { + [S2MPS14_IRQ_PWRONF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRONF_MASK, + }, + [S2MPS14_IRQ_PWRONR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRONR_MASK, + }, + [S2MPS14_IRQ_JIGONBF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_JIGONBF_MASK, + }, + [S2MPS14_IRQ_JIGONBR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_JIGONBR_MASK, + }, + [S2MPS14_IRQ_ACOKBF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_ACOKBF_MASK, + }, + [S2MPS14_IRQ_ACOKBR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_ACOKBR_MASK, + }, + [S2MPS14_IRQ_PWRON1S] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRON1S_MASK, + }, + [S2MPS14_IRQ_MRB] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_MRB_MASK, + }, + [S2MPS14_IRQ_RTC60S] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTC60S_MASK, + }, + [S2MPS14_IRQ_RTCA1] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTCA1_MASK, + }, + [S2MPS14_IRQ_RTCA0] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTCA0_MASK, + }, + [S2MPS14_IRQ_SMPL] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_SMPL_MASK, + }, + [S2MPS14_IRQ_RTC1S] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTC1S_MASK, + }, + [S2MPS14_IRQ_WTSR] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_WTSR_MASK, + }, + [S2MPS14_IRQ_INT120C] = { + .reg_offset = 2, + .mask = S2MPS11_IRQ_INT120C_MASK, + }, + [S2MPS14_IRQ_INT140C] = { + .reg_offset = 2, + .mask = S2MPS11_IRQ_INT140C_MASK, + }, + [S2MPS14_IRQ_TSD] = { + .reg_offset = 2, + .mask = S2MPS14_IRQ_TSD_MASK, + }, +}; static const struct regmap_irq s5m8767_irqs[] = { [S5M8767_IRQ_PWRR] = { @@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; +static const struct regmap_irq_chip s2mps14_irq_chip = { + .name = "s2mps14", + .irqs = s2mps14_irqs, + .num_irqs = ARRAY_SIZE(s2mps14_irqs), + .num_regs = 3, + .status_base = S2MPS14_REG_INT1, + .mask_base = S2MPS14_REG_INT1M, + .ack_base = S2MPS14_REG_INT1, +}; + static const struct regmap_irq_chip s5m8767_irq_chip = { .name = "s5m8767", .irqs = s5m8767_irqs, @@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) sec_pmic->irq_base, &s2mps11_irq_chip, &sec_pmic->irq_data); break; + case S2MPS14X: + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + sec_pmic->irq_base, &s2mps14_irq_chip, + &sec_pmic->irq_data); + break; default: dev_err(sec_pmic->dev, "Unknown device type %d\n", sec_pmic->device_type); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 1169a42519d5..e5e4017b1011 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -407,12 +407,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100 regulator driver" + tristate "Freescale PFUZE100/PFUZE200 regulator driver" depends on I2C select REGMAP_I2C help - Say y here to support the regulators found on the Freescale PFUZE100 - PMIC. + Say y here to support the regulators found on the Freescale + PFUZE100/PFUZE200 PMIC. config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" @@ -424,13 +424,21 @@ config REGULATOR_RC5T583 through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. +config REGULATOR_S2MPA01 + tristate "Samsung S2MPA01 voltage regulator" + depends on MFD_SEC_CORE + help + This driver controls Samsung S2MPA01 voltage output regulator + via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. + config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11 voltage regulator" + tristate "Samsung S2MPS11/S2MPS14 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11 voltage output regulator - via I2C bus. S2MPS11 is comprised of high efficient Buck converters - including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. + This driver supports a Samsung S2MPS11/S2MPS14 voltage output + regulator via I2C bus. The chip is comprised of high efficient Buck + converters including Dual-Phase Buck converter, Buck-Boost converter, + various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index e1ab514f03c5..c3416728c14d 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o +obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 892aa1e5b96c..dbedf1768db0 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -93,7 +93,6 @@ struct max8973_chip { struct device *dev; struct regulator_desc desc; - struct regulator_dev *rdev; struct regmap *regmap; bool enable_external_control; int dvs_gpio; @@ -379,10 +378,8 @@ static int max8973_probe(struct i2c_client *client, } max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL); - if (!max) { - dev_err(&client->dev, "Memory allocation for max failed\n"); + if (!max) return -ENOMEM; - } max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config); if (IS_ERR(max->regmap)) { @@ -474,7 +471,6 @@ static int max8973_probe(struct i2c_client *client, return ret; } - max->rdev = rdev; return 0; } diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 2d618fc9c1af..90b4c530dee5 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -38,7 +38,6 @@ struct max8997_data { struct device *dev; struct max8997_dev *iodev; int num_regulators; - struct regulator_dev **rdev; int ramp_delay; /* in mV/us */ bool buck1_gpiodvs; @@ -924,7 +923,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, return -ENODEV; } - regulators_np = of_find_node_by_name(pmic_np, "regulators"); + regulators_np = of_get_child_by_name(pmic_np, "regulators"); if (!regulators_np) { dev_err(&pdev->dev, "could not find regulators sub-node\n"); return -EINVAL; @@ -937,7 +936,6 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, pdata->num_regulators, GFP_KERNEL); if (!rdata) { of_node_put(regulators_np); - dev_err(&pdev->dev, "could not allocate memory for regulator data\n"); return -ENOMEM; } @@ -1030,10 +1028,10 @@ static int max8997_pmic_probe(struct platform_device *pdev) struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max8997_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; - struct regulator_dev **rdev; + struct regulator_dev *rdev; struct max8997_data *max8997; struct i2c_client *i2c; - int i, ret, size, nr_dvs; + int i, ret, nr_dvs; u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0; if (!pdata) { @@ -1052,12 +1050,6 @@ static int max8997_pmic_probe(struct platform_device *pdev) if (!max8997) return -ENOMEM; - size = sizeof(struct regulator_dev *) * pdata->num_regulators; - max8997->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!max8997->rdev) - return -ENOMEM; - - rdev = max8997->rdev; max8997->dev = &pdev->dev; max8997->iodev = iodev; max8997->num_regulators = pdata->num_regulators; @@ -1205,12 +1197,12 @@ static int max8997_pmic_probe(struct platform_device *pdev) config.driver_data = max8997; config.of_node = pdata->regulators[i].reg_node; - rdev[i] = devm_regulator_register(&pdev->dev, ®ulators[id], - &config); - if (IS_ERR(rdev[i])) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[id], + &config); + if (IS_ERR(rdev)) { dev_err(max8997->dev, "regulator init failed for %d\n", id); - return PTR_ERR(rdev[i]); + return PTR_ERR(rdev); } } diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index ae3f0656feb0..961091b46557 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -40,7 +40,6 @@ struct max8998_data { struct device *dev; struct max8998_dev *iodev; int num_regulators; - struct regulator_dev **rdev; u8 buck1_vol[4]; /* voltages for selection */ u8 buck2_vol[2]; unsigned int buck1_idx; /* index to last changed voltage */ @@ -674,8 +673,10 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * pdata->num_regulators, GFP_KERNEL); - if (!rdata) + if (!rdata) { + of_node_put(regulators_np); return -ENOMEM; + } pdata->regulators = rdata; for (i = 0; i < ARRAY_SIZE(regulators); ++i) { @@ -692,6 +693,9 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, } pdata->num_regulators = rdata - pdata->regulators; + of_node_put(reg_np); + of_node_put(regulators_np); + ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); if (ret) return -EINVAL; @@ -741,10 +745,10 @@ static int max8998_pmic_probe(struct platform_device *pdev) struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max8998_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; - struct regulator_dev **rdev; + struct regulator_dev *rdev; struct max8998_data *max8998; struct i2c_client *i2c; - int i, ret, size; + int i, ret; unsigned int v; if (!pdata) { @@ -763,12 +767,6 @@ static int max8998_pmic_probe(struct platform_device *pdev) if (!max8998) return -ENOMEM; - size = sizeof(struct regulator_dev *) * pdata->num_regulators; - max8998->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!max8998->rdev) - return -ENOMEM; - - rdev = max8998->rdev; max8998->dev = &pdev->dev; max8998->iodev = iodev; max8998->num_regulators = pdata->num_regulators; @@ -872,13 +870,12 @@ static int max8998_pmic_probe(struct platform_device *pdev) config.init_data = pdata->regulators[i].initdata; config.driver_data = max8998; - rdev[i] = devm_regulator_register(&pdev->dev, - ®ulators[index], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + rdev = devm_regulator_register(&pdev->dev, ®ulators[index], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); dev_err(max8998->dev, "regulator %s init failed (%d)\n", regulators[index].name, ret); - rdev[i] = NULL; return ret; } } diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index da4859282302..05b971726ffa 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -167,8 +167,10 @@ int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) struct device_node *parent; int num; - of_node_get(pdev->dev.parent->of_node); - parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators"); + if (!pdev->dev.parent->of_node) + return -ENODEV; + + parent = of_get_child_by_name(pdev->dev.parent->of_node, "regulators"); if (!parent) return -ENODEV; @@ -187,8 +189,10 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct device_node *parent, *child; int i, parsed = 0; - of_node_get(pdev->dev.parent->of_node); - parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators"); + if (!pdev->dev.parent->of_node) + return NULL; + + parent = of_get_child_by_name(pdev->dev.parent->of_node, "regulators"); if (!parent) return NULL; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index b699d4e7acc5..67e678c4301c 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -56,6 +56,8 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 +enum chips { PFUZE100, PFUZE200 }; + struct pfuze_regulator { struct regulator_desc desc; unsigned char stby_reg; @@ -63,6 +65,7 @@ struct pfuze_regulator { }; struct pfuze_chip { + int chip_id; struct regmap *regmap; struct device *dev; struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; @@ -78,14 +81,16 @@ static const int pfuze100_vsnvs[] = { }; static const struct i2c_device_id pfuze_device_id[] = { - {.name = "pfuze100"}, - {}, + {.name = "pfuze100", .driver_data = PFUZE100}, + {.name = "pfuze200", .driver_data = PFUZE200}, + { } }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); static const struct of_device_id pfuze_dt_ids[] = { - { .compatible = "fsl,pfuze100" }, - {}, + { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, + { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, + { } }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -139,14 +144,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }; -#define PFUZE100_FIXED_REG(_name, base, voltage) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = 1, \ .ops = &pfuze100_fixed_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (voltage), \ .enable_reg = (base), \ @@ -154,14 +159,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }, \ } -#define PFUZE100_SW_REG(_name, base, min, max, step) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name,\ .n_voltages = ((max) - (min)) / (step) + 1, \ .ops = &pfuze100_sw_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (min), \ .uV_step = (step), \ @@ -172,14 +177,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x3f, \ } -#define PFUZE100_SWB_REG(_name, base, mask, voltages) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = ARRAY_SIZE(voltages), \ .ops = &pfuze100_swb_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .volt_table = voltages, \ .vsel_reg = (base), \ @@ -187,14 +192,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }, \ } -#define PFUZE100_VGEN_REG(_name, base, min, max, step) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = ((max) - (min)) / (step) + 1, \ .ops = &pfuze100_ldo_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (min), \ .uV_step = (step), \ @@ -207,25 +212,45 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } +/* PFUZE100 */ static struct pfuze_regulator pfuze100_regulators[] = { - PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), - PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), - PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), - PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), - PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), - PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000), - PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), - PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), - PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), + PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), + PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + +static struct pfuze_regulator pfuze200_regulators[] = { + PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), + PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator *pfuze_regulators; + #ifdef CONFIG_OF +/* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { { .name = "sw1ab", }, { .name = "sw1c", }, @@ -244,24 +269,56 @@ static struct of_regulator_match pfuze100_matches[] = { { .name = "vgen6", }, }; +/* PFUZE200 */ +static struct of_regulator_match pfuze200_matches[] = { + + { .name = "sw1ab", }, + { .name = "sw2", }, + { .name = "sw3a", }, + { .name = "sw3b", }, + { .name = "swbst", }, + { .name = "vsnvs", }, + { .name = "vrefddr", }, + { .name = "vgen1", }, + { .name = "vgen2", }, + { .name = "vgen3", }, + { .name = "vgen4", }, + { .name = "vgen5", }, + { .name = "vgen6", }, +}; + +static struct of_regulator_match *pfuze_matches; + static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) { struct device *dev = chip->dev; struct device_node *np, *parent; int ret; - np = of_node_get(dev->parent->of_node); + np = of_node_get(dev->of_node); if (!np) - return 0; + return -EINVAL; - parent = of_find_node_by_name(np, "regulators"); + parent = of_get_child_by_name(np, "regulators"); if (!parent) { dev_err(dev, "regulators node not found\n"); return -EINVAL; } - ret = of_regulator_match(dev, parent, pfuze100_matches, - ARRAY_SIZE(pfuze100_matches)); + switch (chip->chip_id) { + case PFUZE200: + pfuze_matches = pfuze200_matches; + ret = of_regulator_match(dev, parent, pfuze200_matches, + ARRAY_SIZE(pfuze200_matches)); + break; + + case PFUZE100: + default: + pfuze_matches = pfuze100_matches; + ret = of_regulator_match(dev, parent, pfuze100_matches, + ARRAY_SIZE(pfuze100_matches)); + break; + } of_node_put(parent); if (ret < 0) { @@ -275,12 +332,12 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) static inline struct regulator_init_data *match_init_data(int index) { - return pfuze100_matches[index].init_data; + return pfuze_matches[index].init_data; } static inline struct device_node *match_of_node(int index) { - return pfuze100_matches[index].of_node; + return pfuze_matches[index].of_node; } #else static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -308,16 +365,14 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) if (ret) return ret; - switch (value & 0x0f) { - /* - * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 - * as ID=8 - */ - case 0x8: + if (((value & 0x0f) == 0x8) && (pfuze_chip->chip_id == PFUZE100)) { + /* + * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 + * as ID=8 in PFUZE100 + */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); - case 0x0: - break; - default: + } else if ((value & 0x0f) != pfuze_chip->chip_id) { + /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; } @@ -353,17 +408,31 @@ static int pfuze100_regulator_probe(struct i2c_client *client, dev_get_platdata(&client->dev); struct regulator_config config = { }; int i, ret; + const struct of_device_id *match; + u32 regulator_num; + u32 sw_check_start, sw_check_end; pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), GFP_KERNEL); if (!pfuze_chip) return -ENOMEM; - i2c_set_clientdata(client, pfuze_chip); - - memcpy(pfuze_chip->regulator_descs, pfuze100_regulators, - sizeof(pfuze_chip->regulator_descs)); + if (client->dev.of_node) { + match = of_match_device(of_match_ptr(pfuze_dt_ids), + &client->dev); + if (!match) { + dev_err(&client->dev, "Error: No device match found\n"); + return -ENODEV; + } + pfuze_chip->chip_id = (int)(long)match->data; + } else if (id) { + pfuze_chip->chip_id = id->driver_data; + } else { + dev_err(&client->dev, "No dts match or id table match found\n"); + return -ENODEV; + } + i2c_set_clientdata(client, pfuze_chip); pfuze_chip->dev = &client->dev; pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config); @@ -380,11 +449,34 @@ static int pfuze100_regulator_probe(struct i2c_client *client, return ret; } + /* use the right regulators after identify the right device */ + switch (pfuze_chip->chip_id) { + case PFUZE200: + pfuze_regulators = pfuze200_regulators; + regulator_num = ARRAY_SIZE(pfuze200_regulators); + sw_check_start = PFUZE200_SW2; + sw_check_end = PFUZE200_SW3B; + break; + + case PFUZE100: + default: + pfuze_regulators = pfuze100_regulators; + regulator_num = ARRAY_SIZE(pfuze100_regulators); + sw_check_start = PFUZE100_SW2; + sw_check_end = PFUZE100_SW4; + break; + } + dev_info(&client->dev, "pfuze%s found.\n", + (pfuze_chip->chip_id == PFUZE100) ? "100" : "200"); + + memcpy(pfuze_chip->regulator_descs, pfuze_regulators, + sizeof(pfuze_chip->regulator_descs)); + ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) return ret; - for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) { + for (i = 0; i < regulator_num; i++) { struct regulator_init_data *init_data; struct regulator_desc *desc; int val; @@ -397,7 +489,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, init_data = match_init_data(i); /* SW2~SW4 high bit check and modify the voltage value table */ - if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) { + if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); if (val & 0x40) { desc->min_uV = 800000; @@ -415,7 +507,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, devm_regulator_register(&client->dev, desc, &config); if (IS_ERR(pfuze_chip->regulators[i])) { dev_err(&client->dev, "register regulator%s failed\n", - pfuze100_regulators[i].desc.name); + pfuze_regulators[i].desc.name); return PTR_ERR(pfuze_chip->regulators[i]); } } @@ -435,6 +527,6 @@ static struct i2c_driver pfuze_driver = { module_i2c_driver(pfuze_driver); MODULE_AUTHOR("Robin Gong <b38343@freescale.com>"); -MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC"); +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("i2c:pfuze100-regulator"); diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c index b58affb33143..4c414ae109ae 100644 --- a/drivers/regulator/rc5t583-regulator.c +++ b/drivers/regulator/rc5t583-regulator.c @@ -119,7 +119,6 @@ static int rc5t583_regulator_probe(struct platform_device *pdev) { struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent); struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev); - struct regulator_init_data *reg_data; struct regulator_config config = { }; struct rc5t583_regulator *reg = NULL; struct rc5t583_regulator *regs; @@ -135,19 +134,11 @@ static int rc5t583_regulator_probe(struct platform_device *pdev) regs = devm_kzalloc(&pdev->dev, RC5T583_REGULATOR_MAX * sizeof(struct rc5t583_regulator), GFP_KERNEL); - if (!regs) { - dev_err(&pdev->dev, "Memory allocation failed exiting..\n"); + if (!regs) return -ENOMEM; - } for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) { - reg_data = pdata->reg_init_data[id]; - - /* No need to register if there is no regulator data */ - if (!reg_data) - continue; - reg = ®s[id]; ri = &rc5t583_reg_info[id]; reg->reg_info = ri; @@ -169,7 +160,7 @@ static int rc5t583_regulator_probe(struct platform_device *pdev) skip_ext_pwr_config: config.dev = &pdev->dev; - config.init_data = reg_data; + config.init_data = pdata->reg_init_data[id]; config.driver_data = reg; config.regmap = rc5t583->regmap; diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c new file mode 100644 index 000000000000..808b3aa7a42c --- /dev/null +++ b/drivers/regulator/s2mpa01.c @@ -0,0 +1,481 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/samsung/core.h> +#include <linux/mfd/samsung/s2mpa01.h> + +#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators) + +struct s2mpa01_info { + int ramp_delay24; + int ramp_delay3; + int ramp_delay5; + int ramp_delay16; + int ramp_delay7; + int ramp_delay8910; +}; + +static int get_ramp_delay(int ramp_delay) +{ + unsigned char cnt = 0; + + ramp_delay /= 6250; + + while (true) { + ramp_delay = ramp_delay >> 1; + if (ramp_delay == 0) + break; + cnt++; + } + + if (cnt > 3) + cnt = 3; + + return cnt; +} + +static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_delay = 0; + int old_volt, new_volt; + + switch (rdev->desc->id) { + case S2MPA01_BUCK2: + case S2MPA01_BUCK4: + ramp_delay = s2mpa01->ramp_delay24; + break; + case S2MPA01_BUCK3: + ramp_delay = s2mpa01->ramp_delay3; + break; + case S2MPA01_BUCK5: + ramp_delay = s2mpa01->ramp_delay5; + break; + case S2MPA01_BUCK1: + case S2MPA01_BUCK6: + ramp_delay = s2mpa01->ramp_delay16; + break; + case S2MPA01_BUCK7: + ramp_delay = s2mpa01->ramp_delay7; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + ramp_delay = s2mpa01->ramp_delay8910; + break; + } + + if (ramp_delay == 0) + ramp_delay = rdev->desc->ramp_delay; + + old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector); + new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector); + + return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); +} + +static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev); + unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2; + unsigned int ramp_enable = 1, enable_shift = 0; + int ret; + + switch (rdev->desc->id) { + case S2MPA01_BUCK1: + enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK2: + enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK3: + enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + s2mpa01->ramp_delay3 = ramp_delay; + ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK4: + enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT; + if (!ramp_delay) { + ramp_enable = 0; + break; + } + + if (ramp_delay > s2mpa01->ramp_delay24) + s2mpa01->ramp_delay24 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay24; + + ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT; + ramp_reg = S2MPA01_REG_RAMP1; + break; + case S2MPA01_BUCK5: + s2mpa01->ramp_delay5 = ramp_delay; + ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT; + break; + case S2MPA01_BUCK6: + if (ramp_delay > s2mpa01->ramp_delay16) + s2mpa01->ramp_delay16 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay16; + + ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT; + break; + case S2MPA01_BUCK7: + s2mpa01->ramp_delay7 = ramp_delay; + ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT; + break; + case S2MPA01_BUCK8: + case S2MPA01_BUCK9: + case S2MPA01_BUCK10: + if (ramp_delay > s2mpa01->ramp_delay8910) + s2mpa01->ramp_delay8910 = ramp_delay; + else + ramp_delay = s2mpa01->ramp_delay8910; + + ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT; + break; + default: + return 0; + } + + if (!ramp_enable) + goto ramp_disable; + + if (enable_shift) { + ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 1 << enable_shift); + if (ret) { + dev_err(&rdev->dev, "failed to enable ramp rate\n"); + return ret; + } + } + + ramp_val = get_ramp_delay(ramp_delay); + + return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift, + ramp_val << ramp_shift); + +ramp_disable: + return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1, + 1 << enable_shift, 0); +} + +static struct regulator_ops s2mpa01_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops s2mpa01_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel, + .set_ramp_delay = s2mpa01_set_ramp_delay, +}; + +#define regulator_desc_ldo1(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP1, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} +#define regulator_desc_ldo2(num) { \ + .name = "LDO"#num, \ + .id = S2MPA01_LDO##num, \ + .ops = &s2mpa01_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_LDO_MIN, \ + .uV_step = S2MPA01_LDO_STEP2, \ + .n_voltages = S2MPA01_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPA01_LDO_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck1_4(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck5 { \ + .name = "BUCK5", \ + .id = S2MPA01_BUCK5, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B5CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B5CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck6_7(num) { \ + .name = "BUCK"#num, \ + .id = S2MPA01_BUCK##num, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN1, \ + .uV_step = S2MPA01_BUCK_STEP1, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck8 { \ + .name = "BUCK8", \ + .id = S2MPA01_BUCK8, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN2, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B8CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B8CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck9 { \ + .name = "BUCK9", \ + .id = S2MPA01_BUCK9, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN4, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B9CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B9CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +#define regulator_desc_buck10 { \ + .name = "BUCK10", \ + .id = S2MPA01_BUCK10, \ + .ops = &s2mpa01_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPA01_BUCK_MIN3, \ + .uV_step = S2MPA01_BUCK_STEP2, \ + .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPA01_RAMP_DELAY, \ + .vsel_reg = S2MPA01_REG_B10CTRL2, \ + .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \ + .enable_reg = S2MPA01_REG_B10CTRL1, \ + .enable_mask = S2MPA01_ENABLE_MASK \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo2(1), + regulator_desc_ldo1(2), + regulator_desc_ldo1(3), + regulator_desc_ldo1(4), + regulator_desc_ldo1(5), + regulator_desc_ldo2(6), + regulator_desc_ldo1(7), + regulator_desc_ldo1(8), + regulator_desc_ldo1(9), + regulator_desc_ldo1(10), + regulator_desc_ldo2(11), + regulator_desc_ldo1(12), + regulator_desc_ldo1(13), + regulator_desc_ldo1(14), + regulator_desc_ldo1(15), + regulator_desc_ldo1(16), + regulator_desc_ldo1(17), + regulator_desc_ldo1(18), + regulator_desc_ldo1(19), + regulator_desc_ldo1(20), + regulator_desc_ldo1(21), + regulator_desc_ldo2(22), + regulator_desc_ldo2(23), + regulator_desc_ldo1(24), + regulator_desc_ldo1(25), + regulator_desc_ldo1(26), + regulator_desc_buck1_4(1), + regulator_desc_buck1_4(2), + regulator_desc_buck1_4(3), + regulator_desc_buck1_4(4), + regulator_desc_buck5, + regulator_desc_buck6_7(6), + regulator_desc_buck6_7(7), + regulator_desc_buck8, + regulator_desc_buck9, + regulator_desc_buck10, +}; + +static int s2mpa01_pmic_probe(struct platform_device *pdev) +{ + struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); + struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX]; + struct device_node *reg_np = NULL; + struct regulator_config config = { }; + struct s2mpa01_info *s2mpa01; + int i; + + s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL); + if (!s2mpa01) + return -ENOMEM; + + for (i = 0; i < S2MPA01_REGULATOR_CNT; i++) + rdata[i].name = regulators[i].name; + + if (iodev->dev->of_node) { + reg_np = of_get_child_by_name(iodev->dev->of_node, + "regulators"); + if (!reg_np) { + dev_err(&pdev->dev, + "could not find regulators sub-node\n"); + return -EINVAL; + } + + of_regulator_match(&pdev->dev, reg_np, rdata, + S2MPA01_REGULATOR_MAX); + of_node_put(reg_np); + } + + platform_set_drvdata(pdev, s2mpa01); + + config.dev = &pdev->dev; + config.regmap = iodev->regmap_pmic; + config.driver_data = s2mpa01; + + for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) { + struct regulator_dev *rdev; + if (pdata) + config.init_data = pdata->regulators[i].initdata; + else + config.init_data = rdata[i].init_data; + + if (reg_np) + config.of_node = rdata[i].of_node; + + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "regulator init failed for %d\n", + i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id s2mpa01_pmic_id[] = { + { "s2mpa01-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id); + +static struct platform_driver s2mpa01_pmic_driver = { + .driver = { + .name = "s2mpa01-pmic", + .owner = THIS_MODULE, + }, + .probe = s2mpa01_pmic_probe, + .id_table = s2mpa01_pmic_id, +}; + +module_platform_driver(s2mpa01_pmic_driver); + +/* Module information */ +MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); +MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>"); +MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 89966213315c..68fd54702edb 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -1,13 +1,18 @@ /* * s2mps11.c * - * Copyright (c) 2012 Samsung Electronics Co., Ltd + * Copyright (c) 2012-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * */ @@ -24,18 +29,21 @@ #include <linux/regulator/of_regulator.h> #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/s2mps11.h> - -#define S2MPS11_REGULATOR_CNT ARRAY_SIZE(regulators) +#include <linux/mfd/samsung/s2mps14.h> struct s2mps11_info { - struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX]; - + unsigned int rdev_num; int ramp_delay2; int ramp_delay34; int ramp_delay5; int ramp_delay16; int ramp_delay7810; int ramp_delay9; + /* + * One bit for each S2MPS14 regulator whether the suspend mode + * was enabled. + */ + unsigned int s2mps14_suspend_state:30; }; static int get_ramp_delay(int ramp_delay) @@ -236,7 +244,7 @@ static struct regulator_ops s2mps11_buck_ops = { .set_ramp_delay = s2mps11_set_ramp_delay, }; -#define regulator_desc_ldo1(num) { \ +#define regulator_desc_s2mps11_ldo1(num) { \ .name = "LDO"#num, \ .id = S2MPS11_LDO##num, \ .ops = &s2mps11_ldo_ops, \ @@ -250,7 +258,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_reg = S2MPS11_REG_L1CTRL + num - 1, \ .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_ldo2(num) { \ +#define regulator_desc_s2mps11_ldo2(num) { \ .name = "LDO"#num, \ .id = S2MPS11_LDO##num, \ .ops = &s2mps11_ldo_ops, \ @@ -265,7 +273,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck1_4(num) { \ +#define regulator_desc_s2mps11_buck1_4(num) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -281,7 +289,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck5 { \ +#define regulator_desc_s2mps11_buck5 { \ .name = "BUCK5", \ .id = S2MPS11_BUCK5, \ .ops = &s2mps11_buck_ops, \ @@ -297,7 +305,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck6_8(num) { \ +#define regulator_desc_s2mps11_buck6_8(num) { \ .name = "BUCK"#num, \ .id = S2MPS11_BUCK##num, \ .ops = &s2mps11_buck_ops, \ @@ -313,7 +321,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck9 { \ +#define regulator_desc_s2mps11_buck9 { \ .name = "BUCK9", \ .id = S2MPS11_BUCK9, \ .ops = &s2mps11_buck_ops, \ @@ -329,7 +337,7 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -#define regulator_desc_buck10 { \ +#define regulator_desc_s2mps11_buck10 { \ .name = "BUCK10", \ .id = S2MPS11_BUCK10, \ .ops = &s2mps11_buck_ops, \ @@ -345,72 +353,252 @@ static struct regulator_ops s2mps11_buck_ops = { .enable_mask = S2MPS11_ENABLE_MASK \ } -static struct regulator_desc regulators[] = { - regulator_desc_ldo2(1), - regulator_desc_ldo1(2), - regulator_desc_ldo1(3), - regulator_desc_ldo1(4), - regulator_desc_ldo1(5), - regulator_desc_ldo2(6), - regulator_desc_ldo1(7), - regulator_desc_ldo1(8), - regulator_desc_ldo1(9), - regulator_desc_ldo1(10), - regulator_desc_ldo2(11), - regulator_desc_ldo1(12), - regulator_desc_ldo1(13), - regulator_desc_ldo1(14), - regulator_desc_ldo1(15), - regulator_desc_ldo1(16), - regulator_desc_ldo1(17), - regulator_desc_ldo1(18), - regulator_desc_ldo1(19), - regulator_desc_ldo1(20), - regulator_desc_ldo1(21), - regulator_desc_ldo2(22), - regulator_desc_ldo2(23), - regulator_desc_ldo1(24), - regulator_desc_ldo1(25), - regulator_desc_ldo1(26), - regulator_desc_ldo2(27), - regulator_desc_ldo1(28), - regulator_desc_ldo1(29), - regulator_desc_ldo1(30), - regulator_desc_ldo1(31), - regulator_desc_ldo1(32), - regulator_desc_ldo1(33), - regulator_desc_ldo1(34), - regulator_desc_ldo1(35), - regulator_desc_ldo1(36), - regulator_desc_ldo1(37), - regulator_desc_ldo1(38), - regulator_desc_buck1_4(1), - regulator_desc_buck1_4(2), - regulator_desc_buck1_4(3), - regulator_desc_buck1_4(4), - regulator_desc_buck5, - regulator_desc_buck6_8(6), - regulator_desc_buck6_8(7), - regulator_desc_buck6_8(8), - regulator_desc_buck9, - regulator_desc_buck10, +static const struct regulator_desc s2mps11_regulators[] = { + regulator_desc_s2mps11_ldo2(1), + regulator_desc_s2mps11_ldo1(2), + regulator_desc_s2mps11_ldo1(3), + regulator_desc_s2mps11_ldo1(4), + regulator_desc_s2mps11_ldo1(5), + regulator_desc_s2mps11_ldo2(6), + regulator_desc_s2mps11_ldo1(7), + regulator_desc_s2mps11_ldo1(8), + regulator_desc_s2mps11_ldo1(9), + regulator_desc_s2mps11_ldo1(10), + regulator_desc_s2mps11_ldo2(11), + regulator_desc_s2mps11_ldo1(12), + regulator_desc_s2mps11_ldo1(13), + regulator_desc_s2mps11_ldo1(14), + regulator_desc_s2mps11_ldo1(15), + regulator_desc_s2mps11_ldo1(16), + regulator_desc_s2mps11_ldo1(17), + regulator_desc_s2mps11_ldo1(18), + regulator_desc_s2mps11_ldo1(19), + regulator_desc_s2mps11_ldo1(20), + regulator_desc_s2mps11_ldo1(21), + regulator_desc_s2mps11_ldo2(22), + regulator_desc_s2mps11_ldo2(23), + regulator_desc_s2mps11_ldo1(24), + regulator_desc_s2mps11_ldo1(25), + regulator_desc_s2mps11_ldo1(26), + regulator_desc_s2mps11_ldo2(27), + regulator_desc_s2mps11_ldo1(28), + regulator_desc_s2mps11_ldo1(29), + regulator_desc_s2mps11_ldo1(30), + regulator_desc_s2mps11_ldo1(31), + regulator_desc_s2mps11_ldo1(32), + regulator_desc_s2mps11_ldo1(33), + regulator_desc_s2mps11_ldo1(34), + regulator_desc_s2mps11_ldo1(35), + regulator_desc_s2mps11_ldo1(36), + regulator_desc_s2mps11_ldo1(37), + regulator_desc_s2mps11_ldo1(38), + regulator_desc_s2mps11_buck1_4(1), + regulator_desc_s2mps11_buck1_4(2), + regulator_desc_s2mps11_buck1_4(3), + regulator_desc_s2mps11_buck1_4(4), + regulator_desc_s2mps11_buck5, + regulator_desc_s2mps11_buck6_8(6), + regulator_desc_s2mps11_buck6_8(7), + regulator_desc_s2mps11_buck6_8(8), + regulator_desc_s2mps11_buck9, + regulator_desc_s2mps11_buck10, +}; + +static int s2mps14_regulator_enable(struct regulator_dev *rdev) +{ + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + unsigned int val; + + if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) + val = S2MPS14_ENABLE_SUSPEND; + else + val = rdev->desc->enable_mask; + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val); +} + +static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) +{ + int ret; + unsigned int val; + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + + /* LDO3 should be always on and does not support suspend mode */ + if (rdev_get_id(rdev) == S2MPS14_LDO3) + return 0; + + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); + if (ret < 0) + return ret; + + s2mps11->s2mps14_suspend_state |= (1 << rdev_get_id(rdev)); + /* + * Don't enable suspend mode if regulator is already disabled because + * this would effectively for a short time turn on the regulator after + * resuming. + * However we still want to toggle the suspend_state bit for regulator + * in case if it got enabled before suspending the system. + */ + if (!(val & rdev->desc->enable_mask)) + return 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND); +} + +static struct regulator_ops s2mps14_reg_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = s2mps14_regulator_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_disable = s2mps14_regulator_set_suspend_disable, +}; + +#define regulator_desc_s2mps14_ldo1(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_800MV, \ + .uV_step = S2MPS14_LDO_STEP_25MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_ldo2(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_1800MV, \ + .uV_step = S2MPS14_LDO_STEP_25MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_ldo3(num) { \ + .name = "LDO"#num, \ + .id = S2MPS14_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_LDO_MIN_800MV, \ + .uV_step = S2MPS14_LDO_STEP_12_5MV, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_buck1235(num) { \ + .name = "BUCK"#num, \ + .id = S2MPS14_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_BUCK1235_MIN_600MV, \ + .uV_step = S2MPS14_BUCK1235_STEP_6_25MV, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .linear_min_sel = S2MPS14_BUCK1235_START_SEL, \ + .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} +#define regulator_desc_s2mps14_buck4(num) { \ + .name = "BUCK"#num, \ + .id = S2MPS14_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = S2MPS14_BUCK4_MIN_1400MV, \ + .uV_step = S2MPS14_BUCK4_STEP_12_5MV, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .linear_min_sel = S2MPS14_BUCK4_START_SEL, \ + .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +static const struct regulator_desc s2mps14_regulators[] = { + regulator_desc_s2mps14_ldo3(1), + regulator_desc_s2mps14_ldo3(2), + regulator_desc_s2mps14_ldo1(3), + regulator_desc_s2mps14_ldo1(4), + regulator_desc_s2mps14_ldo3(5), + regulator_desc_s2mps14_ldo3(6), + regulator_desc_s2mps14_ldo1(7), + regulator_desc_s2mps14_ldo2(8), + regulator_desc_s2mps14_ldo3(9), + regulator_desc_s2mps14_ldo3(10), + regulator_desc_s2mps14_ldo1(11), + regulator_desc_s2mps14_ldo2(12), + regulator_desc_s2mps14_ldo2(13), + regulator_desc_s2mps14_ldo2(14), + regulator_desc_s2mps14_ldo2(15), + regulator_desc_s2mps14_ldo2(16), + regulator_desc_s2mps14_ldo2(17), + regulator_desc_s2mps14_ldo2(18), + regulator_desc_s2mps14_ldo1(19), + regulator_desc_s2mps14_ldo1(20), + regulator_desc_s2mps14_ldo1(21), + regulator_desc_s2mps14_ldo3(22), + regulator_desc_s2mps14_ldo1(23), + regulator_desc_s2mps14_ldo2(24), + regulator_desc_s2mps14_ldo2(25), + regulator_desc_s2mps14_buck1235(1), + regulator_desc_s2mps14_buck1235(2), + regulator_desc_s2mps14_buck1235(3), + regulator_desc_s2mps14_buck4(4), + regulator_desc_s2mps14_buck1235(5), }; static int s2mps11_pmic_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); - struct of_regulator_match rdata[S2MPS11_REGULATOR_MAX]; + struct sec_platform_data *pdata = iodev->pdata; + struct of_regulator_match *rdata = NULL; struct device_node *reg_np = NULL; struct regulator_config config = { }; struct s2mps11_info *s2mps11; - int i, ret; + int i, ret = 0; + const struct regulator_desc *regulators; + enum sec_device_type dev_type; s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info), GFP_KERNEL); if (!s2mps11) return -ENOMEM; + dev_type = platform_get_device_id(pdev)->driver_data; + switch (dev_type) { + case S2MPS11X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); + regulators = s2mps11_regulators; + break; + case S2MPS14X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); + regulators = s2mps14_regulators; + break; + default: + dev_err(&pdev->dev, "Invalid device type: %u\n", dev_type); + return -EINVAL; + }; + if (!iodev->dev->of_node) { if (pdata) { goto common_reg; @@ -421,16 +609,22 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) } } - for (i = 0; i < S2MPS11_REGULATOR_CNT; i++) + rdata = kzalloc(sizeof(*rdata) * s2mps11->rdev_num, GFP_KERNEL); + if (!rdata) + return -ENOMEM; + + for (i = 0; i < s2mps11->rdev_num; i++) rdata[i].name = regulators[i].name; - reg_np = of_find_node_by_name(iodev->dev->of_node, "regulators"); + reg_np = of_get_child_by_name(iodev->dev->of_node, "regulators"); if (!reg_np) { dev_err(&pdev->dev, "could not find regulators sub-node\n"); - return -EINVAL; + ret = -EINVAL; + goto out; } - of_regulator_match(&pdev->dev, reg_np, rdata, S2MPS11_REGULATOR_MAX); + of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num); + of_node_put(reg_np); common_reg: platform_set_drvdata(pdev, s2mps11); @@ -438,7 +632,9 @@ common_reg: config.dev = &pdev->dev; config.regmap = iodev->regmap_pmic; config.driver_data = s2mps11; - for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) { + for (i = 0; i < s2mps11->rdev_num; i++) { + struct regulator_dev *regulator; + if (!reg_np) { config.init_data = pdata->regulators[i].initdata; config.of_node = pdata->regulators[i].reg_node; @@ -447,21 +643,25 @@ common_reg: config.of_node = rdata[i].of_node; } - s2mps11->rdev[i] = devm_regulator_register(&pdev->dev, + regulator = devm_regulator_register(&pdev->dev, ®ulators[i], &config); - if (IS_ERR(s2mps11->rdev[i])) { - ret = PTR_ERR(s2mps11->rdev[i]); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); dev_err(&pdev->dev, "regulator init failed for %d\n", i); - return ret; + goto out; } } - return 0; +out: + kfree(rdata); + + return ret; } static const struct platform_device_id s2mps11_pmic_id[] = { - { "s2mps11-pmic", 0}, + { "s2mps11-pmic", S2MPS11X}, + { "s2mps14-pmic", S2MPS14X}, { }, }; MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id); @@ -489,5 +689,5 @@ module_exit(s2mps11_pmic_exit); /* Module information */ MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); -MODULE_DESCRIPTION("SAMSUNG S2MPS11 Regulator Driver"); +MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14 Regulator Driver"); MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 41c9bde410c5..900bc9e1888b 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -18,7 +18,9 @@ enum sec_device_type { S5M8751X, S5M8763X, S5M8767X, + S2MPA01, S2MPS11X, + S2MPS14X, }; /** @@ -50,7 +52,7 @@ struct sec_pmic_dev { struct regmap_irq_chip_data *irq_data; int ono; - int type; + unsigned long type; bool wakeup; bool wtsr_smpl; }; @@ -92,7 +94,7 @@ struct sec_platform_data { int buck3_default_idx; int buck4_default_idx; - int buck_ramp_delay; + int buck_ramp_delay; int buck2_ramp_delay; int buck34_ramp_delay; @@ -100,10 +102,15 @@ struct sec_platform_data { int buck16_ramp_delay; int buck7810_ramp_delay; int buck9_ramp_delay; - - bool buck2_ramp_enable; - bool buck3_ramp_enable; - bool buck4_ramp_enable; + int buck24_ramp_delay; + int buck3_ramp_delay; + int buck7_ramp_delay; + int buck8910_ramp_delay; + + bool buck1_ramp_enable; + bool buck2_ramp_enable; + bool buck3_ramp_enable; + bool buck4_ramp_enable; bool buck6_ramp_enable; int buck2_init; diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index d43b4f9e7fb2..1224f447356b 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -13,6 +13,56 @@ #ifndef __LINUX_MFD_SEC_IRQ_H #define __LINUX_MFD_SEC_IRQ_H +enum s2mpa01_irq { + S2MPA01_IRQ_PWRONF, + S2MPA01_IRQ_PWRONR, + S2MPA01_IRQ_JIGONBF, + S2MPA01_IRQ_JIGONBR, + S2MPA01_IRQ_ACOKBF, + S2MPA01_IRQ_ACOKBR, + S2MPA01_IRQ_PWRON1S, + S2MPA01_IRQ_MRB, + + S2MPA01_IRQ_RTC60S, + S2MPA01_IRQ_RTCA1, + S2MPA01_IRQ_RTCA0, + S2MPA01_IRQ_SMPL, + S2MPA01_IRQ_RTC1S, + S2MPA01_IRQ_WTSR, + + S2MPA01_IRQ_INT120C, + S2MPA01_IRQ_INT140C, + S2MPA01_IRQ_LDO3_TSD, + S2MPA01_IRQ_B16_TSD, + S2MPA01_IRQ_B24_TSD, + S2MPA01_IRQ_B35_TSD, + + S2MPA01_IRQ_NR, +}; + +#define S2MPA01_IRQ_PWRONF_MASK (1 << 0) +#define S2MPA01_IRQ_PWRONR_MASK (1 << 1) +#define S2MPA01_IRQ_JIGONBF_MASK (1 << 2) +#define S2MPA01_IRQ_JIGONBR_MASK (1 << 3) +#define S2MPA01_IRQ_ACOKBF_MASK (1 << 4) +#define S2MPA01_IRQ_ACOKBR_MASK (1 << 5) +#define S2MPA01_IRQ_PWRON1S_MASK (1 << 6) +#define S2MPA01_IRQ_MRB_MASK (1 << 7) + +#define S2MPA01_IRQ_RTC60S_MASK (1 << 0) +#define S2MPA01_IRQ_RTCA1_MASK (1 << 1) +#define S2MPA01_IRQ_RTCA0_MASK (1 << 2) +#define S2MPA01_IRQ_SMPL_MASK (1 << 3) +#define S2MPA01_IRQ_RTC1S_MASK (1 << 4) +#define S2MPA01_IRQ_WTSR_MASK (1 << 5) + +#define S2MPA01_IRQ_INT120C_MASK (1 << 0) +#define S2MPA01_IRQ_INT140C_MASK (1 << 1) +#define S2MPA01_IRQ_LDO3_TSD_MASK (1 << 2) +#define S2MPA01_IRQ_B16_TSD_MASK (1 << 3) +#define S2MPA01_IRQ_B24_TSD_MASK (1 << 4) +#define S2MPA01_IRQ_B35_TSD_MASK (1 << 5) + enum s2mps11_irq { S2MPS11_IRQ_PWRONF, S2MPS11_IRQ_PWRONR, @@ -24,8 +74,8 @@ enum s2mps11_irq { S2MPS11_IRQ_MRB, S2MPS11_IRQ_RTC60S, + S2MPS11_IRQ_RTCA0, S2MPS11_IRQ_RTCA1, - S2MPS11_IRQ_RTCA2, S2MPS11_IRQ_SMPL, S2MPS11_IRQ_RTC1S, S2MPS11_IRQ_WTSR, @@ -47,7 +97,7 @@ enum s2mps11_irq { #define S2MPS11_IRQ_RTC60S_MASK (1 << 0) #define S2MPS11_IRQ_RTCA1_MASK (1 << 1) -#define S2MPS11_IRQ_RTCA2_MASK (1 << 2) +#define S2MPS11_IRQ_RTCA0_MASK (1 << 2) #define S2MPS11_IRQ_SMPL_MASK (1 << 3) #define S2MPS11_IRQ_RTC1S_MASK (1 << 4) #define S2MPS11_IRQ_WTSR_MASK (1 << 5) @@ -55,6 +105,33 @@ enum s2mps11_irq { #define S2MPS11_IRQ_INT120C_MASK (1 << 0) #define S2MPS11_IRQ_INT140C_MASK (1 << 1) +enum s2mps14_irq { + S2MPS14_IRQ_PWRONF, + S2MPS14_IRQ_PWRONR, + S2MPS14_IRQ_JIGONBF, + S2MPS14_IRQ_JIGONBR, + S2MPS14_IRQ_ACOKBF, + S2MPS14_IRQ_ACOKBR, + S2MPS14_IRQ_PWRON1S, + S2MPS14_IRQ_MRB, + + S2MPS14_IRQ_RTC60S, + S2MPS14_IRQ_RTCA1, + S2MPS14_IRQ_RTCA0, + S2MPS14_IRQ_SMPL, + S2MPS14_IRQ_RTC1S, + S2MPS14_IRQ_WTSR, + + S2MPS14_IRQ_INT120C, + S2MPS14_IRQ_INT140C, + S2MPS14_IRQ_TSD, + + S2MPS14_IRQ_NR, +}; + +/* Masks for interrupts are the same as in s2mps11 */ +#define S2MPS14_IRQ_TSD_MASK (1 << 2) + enum s5m8767_irq { S5M8767_IRQ_PWRR, S5M8767_IRQ_PWRF, diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 94b7cd6d8891..3e02b768d537 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -1,12 +1,17 @@ -/* rtc.h +/* rtc.h * - * Copyright (c) 2011 Samsung Electronics Co., Ltd + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * */ @@ -43,6 +48,39 @@ enum sec_rtc_reg { SEC_RTC_STATUS, SEC_WTSR_SMPL_CNTL, SEC_RTC_UDR_CON, + + SEC_RTC_REG_MAX, +}; + +enum s2mps_rtc_reg { + S2MPS_RTC_CTRL, + S2MPS_WTSR_SMPL_CNTL, + S2MPS_RTC_UDR_CON, + S2MPS_RSVD, + S2MPS_RTC_SEC, + S2MPS_RTC_MIN, + S2MPS_RTC_HOUR, + S2MPS_RTC_WEEKDAY, + S2MPS_RTC_DATE, + S2MPS_RTC_MONTH, + S2MPS_RTC_YEAR, + S2MPS_ALARM0_SEC, + S2MPS_ALARM0_MIN, + S2MPS_ALARM0_HOUR, + S2MPS_ALARM0_WEEKDAY, + S2MPS_ALARM0_DATE, + S2MPS_ALARM0_MONTH, + S2MPS_ALARM0_YEAR, + S2MPS_ALARM1_SEC, + S2MPS_ALARM1_MIN, + S2MPS_ALARM1_HOUR, + S2MPS_ALARM1_WEEKDAY, + S2MPS_ALARM1_DATE, + S2MPS_ALARM1_MONTH, + S2MPS_ALARM1_YEAR, + S2MPS_OFFSRC, + + S2MPS_RTC_REG_MAX, }; #define RTC_I2C_ADDR (0x0C >> 1) @@ -54,6 +92,9 @@ enum sec_rtc_reg { #define ALARM1_STATUS (1 << 2) #define UPDATE_AD (1 << 0) +#define S2MPS_ALARM0_STATUS (1 << 2) +#define S2MPS_ALARM1_STATUS (1 << 1) + /* RTC Control Register */ #define BCD_EN_SHIFT 0 #define BCD_EN_MASK (1 << BCD_EN_SHIFT) @@ -62,6 +103,10 @@ enum sec_rtc_reg { /* RTC Update Register1 */ #define RTC_UDR_SHIFT 0 #define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) +#define S2MPS_RTC_WUDR_SHIFT 4 +#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT) +#define S2MPS_RTC_RUDR_SHIFT 0 +#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT) #define RTC_TCON_SHIFT 1 #define RTC_TCON_MASK (1 << RTC_TCON_SHIFT) #define RTC_TIME_EN_SHIFT 3 diff --git a/include/linux/mfd/samsung/s2mpa01.h b/include/linux/mfd/samsung/s2mpa01.h new file mode 100644 index 000000000000..fbc63bc0d6a2 --- /dev/null +++ b/include/linux/mfd/samsung/s2mpa01.h @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S2MPA01_H +#define __LINUX_MFD_S2MPA01_H + +/* S2MPA01 registers */ +enum s2mpa01_reg { + S2MPA01_REG_ID, + S2MPA01_REG_INT1, + S2MPA01_REG_INT2, + S2MPA01_REG_INT3, + S2MPA01_REG_INT1M, + S2MPA01_REG_INT2M, + S2MPA01_REG_INT3M, + S2MPA01_REG_ST1, + S2MPA01_REG_ST2, + S2MPA01_REG_PWRONSRC, + S2MPA01_REG_OFFSRC, + S2MPA01_REG_RTC_BUF, + S2MPA01_REG_CTRL1, + S2MPA01_REG_ETC_TEST, + S2MPA01_REG_RSVD1, + S2MPA01_REG_BU_CHG, + S2MPA01_REG_RAMP1, + S2MPA01_REG_RAMP2, + S2MPA01_REG_LDO_DSCH1, + S2MPA01_REG_LDO_DSCH2, + S2MPA01_REG_LDO_DSCH3, + S2MPA01_REG_LDO_DSCH4, + S2MPA01_REG_OTP_ADRL, + S2MPA01_REG_OTP_ADRH, + S2MPA01_REG_OTP_DATA, + S2MPA01_REG_MON1SEL, + S2MPA01_REG_MON2SEL, + S2MPA01_REG_LEE, + S2MPA01_REG_RSVD2, + S2MPA01_REG_RSVD3, + S2MPA01_REG_RSVD4, + S2MPA01_REG_RSVD5, + S2MPA01_REG_RSVD6, + S2MPA01_REG_TOP_RSVD, + S2MPA01_REG_DVS_SEL, + S2MPA01_REG_DVS_PTR, + S2MPA01_REG_DVS_DATA, + S2MPA01_REG_RSVD_NO, + S2MPA01_REG_UVLO, + S2MPA01_REG_LEE_NO, + S2MPA01_REG_B1CTRL1, + S2MPA01_REG_B1CTRL2, + S2MPA01_REG_B2CTRL1, + S2MPA01_REG_B2CTRL2, + S2MPA01_REG_B3CTRL1, + S2MPA01_REG_B3CTRL2, + S2MPA01_REG_B4CTRL1, + S2MPA01_REG_B4CTRL2, + S2MPA01_REG_B5CTRL1, + S2MPA01_REG_B5CTRL2, + S2MPA01_REG_B5CTRL3, + S2MPA01_REG_B5CTRL4, + S2MPA01_REG_B5CTRL5, + S2MPA01_REG_B5CTRL6, + S2MPA01_REG_B6CTRL1, + S2MPA01_REG_B6CTRL2, + S2MPA01_REG_B7CTRL1, + S2MPA01_REG_B7CTRL2, + S2MPA01_REG_B8CTRL1, + S2MPA01_REG_B8CTRL2, + S2MPA01_REG_B9CTRL1, + S2MPA01_REG_B9CTRL2, + S2MPA01_REG_B10CTRL1, + S2MPA01_REG_B10CTRL2, + S2MPA01_REG_L1CTRL, + S2MPA01_REG_L2CTRL, + S2MPA01_REG_L3CTRL, + S2MPA01_REG_L4CTRL, + S2MPA01_REG_L5CTRL, + S2MPA01_REG_L6CTRL, + S2MPA01_REG_L7CTRL, + S2MPA01_REG_L8CTRL, + S2MPA01_REG_L9CTRL, + S2MPA01_REG_L10CTRL, + S2MPA01_REG_L11CTRL, + S2MPA01_REG_L12CTRL, + S2MPA01_REG_L13CTRL, + S2MPA01_REG_L14CTRL, + S2MPA01_REG_L15CTRL, + S2MPA01_REG_L16CTRL, + S2MPA01_REG_L17CTRL, + S2MPA01_REG_L18CTRL, + S2MPA01_REG_L19CTRL, + S2MPA01_REG_L20CTRL, + S2MPA01_REG_L21CTRL, + S2MPA01_REG_L22CTRL, + S2MPA01_REG_L23CTRL, + S2MPA01_REG_L24CTRL, + S2MPA01_REG_L25CTRL, + S2MPA01_REG_L26CTRL, + + S2MPA01_REG_LDO_OVCB1, + S2MPA01_REG_LDO_OVCB2, + S2MPA01_REG_LDO_OVCB3, + S2MPA01_REG_LDO_OVCB4, + +}; + +/* S2MPA01 regulator ids */ +enum s2mpa01_regulators { + S2MPA01_LDO1, + S2MPA01_LDO2, + S2MPA01_LDO3, + S2MPA01_LDO4, + S2MPA01_LDO5, + S2MPA01_LDO6, + S2MPA01_LDO7, + S2MPA01_LDO8, + S2MPA01_LDO9, + S2MPA01_LDO10, + S2MPA01_LDO11, + S2MPA01_LDO12, + S2MPA01_LDO13, + S2MPA01_LDO14, + S2MPA01_LDO15, + S2MPA01_LDO16, + S2MPA01_LDO17, + S2MPA01_LDO18, + S2MPA01_LDO19, + S2MPA01_LDO20, + S2MPA01_LDO21, + S2MPA01_LDO22, + S2MPA01_LDO23, + S2MPA01_LDO24, + S2MPA01_LDO25, + S2MPA01_LDO26, + + S2MPA01_BUCK1, + S2MPA01_BUCK2, + S2MPA01_BUCK3, + S2MPA01_BUCK4, + S2MPA01_BUCK5, + S2MPA01_BUCK6, + S2MPA01_BUCK7, + S2MPA01_BUCK8, + S2MPA01_BUCK9, + S2MPA01_BUCK10, + + S2MPA01_REGULATOR_MAX, +}; + +#define S2MPA01_BUCK_MIN1 600000 +#define S2MPA01_BUCK_MIN2 800000 +#define S2MPA01_BUCK_MIN3 1000000 +#define S2MPA01_BUCK_MIN4 1500000 +#define S2MPA01_LDO_MIN 800000 + +#define S2MPA01_BUCK_STEP1 6250 +#define S2MPA01_BUCK_STEP2 12500 + +#define S2MPA01_LDO_STEP1 50000 +#define S2MPA01_LDO_STEP2 25000 + +#define S2MPA01_LDO_VSEL_MASK 0x3F +#define S2MPA01_BUCK_VSEL_MASK 0xFF +#define S2MPA01_ENABLE_MASK (0x03 << S2MPA01_ENABLE_SHIFT) +#define S2MPA01_ENABLE_SHIFT 0x06 +#define S2MPA01_LDO_N_VOLTAGES (S2MPA01_LDO_VSEL_MASK + 1) +#define S2MPA01_BUCK_N_VOLTAGES (S2MPA01_BUCK_VSEL_MASK + 1) + +#define S2MPA01_RAMP_DELAY 12500 /* uV/us */ + +#define S2MPA01_BUCK16_RAMP_SHIFT 4 +#define S2MPA01_BUCK24_RAMP_SHIFT 6 +#define S2MPA01_BUCK3_RAMP_SHIFT 4 +#define S2MPA01_BUCK5_RAMP_SHIFT 6 +#define S2MPA01_BUCK7_RAMP_SHIFT 2 +#define S2MPA01_BUCK8910_RAMP_SHIFT 0 + +#define S2MPA01_BUCK1_RAMP_EN_SHIFT 3 +#define S2MPA01_BUCK2_RAMP_EN_SHIFT 2 +#define S2MPA01_BUCK3_RAMP_EN_SHIFT 1 +#define S2MPA01_BUCK4_RAMP_EN_SHIFT 0 +#define S2MPA01_PMIC_EN_SHIFT 6 + +#endif /*__LINUX_MFD_S2MPA01_H */ diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h new file mode 100644 index 000000000000..4b449b8ac548 --- /dev/null +++ b/include/linux/mfd/samsung/s2mps14.h @@ -0,0 +1,154 @@ +/* + * s2mps14.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS14_H +#define __LINUX_MFD_S2MPS14_H + +/* S2MPS14 registers */ +enum s2mps14_reg { + S2MPS14_REG_ID, + S2MPS14_REG_INT1, + S2MPS14_REG_INT2, + S2MPS14_REG_INT3, + S2MPS14_REG_INT1M, + S2MPS14_REG_INT2M, + S2MPS14_REG_INT3M, + S2MPS14_REG_ST1, + S2MPS14_REG_ST2, + S2MPS14_REG_PWRONSRC, + S2MPS14_REG_OFFSRC, + S2MPS14_REG_BU_CHG, + S2MPS14_REG_RTCCTRL, + S2MPS14_REG_CTRL1, + S2MPS14_REG_CTRL2, + S2MPS14_REG_RSVD1, + S2MPS14_REG_RSVD2, + S2MPS14_REG_RSVD3, + S2MPS14_REG_RSVD4, + S2MPS14_REG_RSVD5, + S2MPS14_REG_RSVD6, + S2MPS14_REG_CTRL3, + S2MPS14_REG_RSVD7, + S2MPS14_REG_RSVD8, + S2MPS14_REG_WRSTBI, + S2MPS14_REG_B1CTRL1, + S2MPS14_REG_B1CTRL2, + S2MPS14_REG_B2CTRL1, + S2MPS14_REG_B2CTRL2, + S2MPS14_REG_B3CTRL1, + S2MPS14_REG_B3CTRL2, + S2MPS14_REG_B4CTRL1, + S2MPS14_REG_B4CTRL2, + S2MPS14_REG_B5CTRL1, + S2MPS14_REG_B5CTRL2, + S2MPS14_REG_L1CTRL, + S2MPS14_REG_L2CTRL, + S2MPS14_REG_L3CTRL, + S2MPS14_REG_L4CTRL, + S2MPS14_REG_L5CTRL, + S2MPS14_REG_L6CTRL, + S2MPS14_REG_L7CTRL, + S2MPS14_REG_L8CTRL, + S2MPS14_REG_L9CTRL, + S2MPS14_REG_L10CTRL, + S2MPS14_REG_L11CTRL, + S2MPS14_REG_L12CTRL, + S2MPS14_REG_L13CTRL, + S2MPS14_REG_L14CTRL, + S2MPS14_REG_L15CTRL, + S2MPS14_REG_L16CTRL, + S2MPS14_REG_L17CTRL, + S2MPS14_REG_L18CTRL, + S2MPS14_REG_L19CTRL, + S2MPS14_REG_L20CTRL, + S2MPS14_REG_L21CTRL, + S2MPS14_REG_L22CTRL, + S2MPS14_REG_L23CTRL, + S2MPS14_REG_L24CTRL, + S2MPS14_REG_L25CTRL, + S2MPS14_REG_LDODSCH1, + S2MPS14_REG_LDODSCH2, + S2MPS14_REG_LDODSCH3, +}; + +/* S2MPS14 regulator ids */ +enum s2mps14_regulators { + S2MPS14_LDO1, + S2MPS14_LDO2, + S2MPS14_LDO3, + S2MPS14_LDO4, + S2MPS14_LDO5, + S2MPS14_LDO6, + S2MPS14_LDO7, + S2MPS14_LDO8, + S2MPS14_LDO9, + S2MPS14_LDO10, + S2MPS14_LDO11, + S2MPS14_LDO12, + S2MPS14_LDO13, + S2MPS14_LDO14, + S2MPS14_LDO15, + S2MPS14_LDO16, + S2MPS14_LDO17, + S2MPS14_LDO18, + S2MPS14_LDO19, + S2MPS14_LDO20, + S2MPS14_LDO21, + S2MPS14_LDO22, + S2MPS14_LDO23, + S2MPS14_LDO24, + S2MPS14_LDO25, + S2MPS14_BUCK1, + S2MPS14_BUCK2, + S2MPS14_BUCK3, + S2MPS14_BUCK4, + S2MPS14_BUCK5, + + S2MPS14_REGULATOR_MAX, +}; + +/* Regulator constraints for BUCKx */ +#define S2MPS14_BUCK1235_MIN_600MV 600000 +#define S2MPS14_BUCK4_MIN_1400MV 1400000 +#define S2MPS14_BUCK1235_STEP_6_25MV 6250 +#define S2MPS14_BUCK4_STEP_12_5MV 12500 +#define S2MPS14_BUCK1235_START_SEL 0x20 +#define S2MPS14_BUCK4_START_SEL 0x40 +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS14_BUCK_RAMP_DELAY 12500 + +/* Regulator constraints for different types of LDOx */ +#define S2MPS14_LDO_MIN_800MV 800000 +#define S2MPS14_LDO_MIN_1800MV 1800000 +#define S2MPS14_LDO_STEP_12_5MV 12500 +#define S2MPS14_LDO_STEP_25MV 25000 + +#define S2MPS14_LDO_VSEL_MASK 0x3F +#define S2MPS14_BUCK_VSEL_MASK 0xFF +#define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT) +#define S2MPS14_ENABLE_SHIFT 6 +/* On/Off controlled by PWREN */ +#define S2MPS14_ENABLE_SUSPEND (0x01 << S2MPS14_ENABLE_SHIFT) +#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) +#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) + +#endif /* __LINUX_MFD_S2MPS14_H */ diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index 65d550bf3954..364f7a7c43db 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -35,6 +35,20 @@ #define PFUZE100_VGEN6 14 #define PFUZE100_MAX_REGULATOR 15 +#define PFUZE200_SW1AB 0 +#define PFUZE200_SW2 1 +#define PFUZE200_SW3A 2 +#define PFUZE200_SW3B 3 +#define PFUZE200_SWBST 4 +#define PFUZE200_VSNVS 5 +#define PFUZE200_VREFDDR 6 +#define PFUZE200_VGEN1 7 +#define PFUZE200_VGEN2 8 +#define PFUZE200_VGEN3 9 +#define PFUZE200_VGEN4 10 +#define PFUZE200_VGEN5 11 +#define PFUZE200_VGEN6 12 + struct regulator_init_data; struct pfuze_regulator_platform_data { |